|id|,|path|,|name|,|code|,|price|,|sale-price|,|headline|,|label|,|ship-weight|,|availability|,|ypath|,|abstract|,|caption|,|options||-||61-1807|,||,| Replacement 11" Superlight FRONT Rotor Ring - Slotted 2016-2017 |,|61-1807|,|125.05|,|115.95|,||,||,||,||,||,||,| Replacement 11" Superlight FRONT Rotor Ring - Slotted 2016-2017
Replacement rotor ring for our Superlight 2-piece front brake rotors.
Rotor type: Slotted face
*** Product images may differ from actual product appearance ***
|,|||-||13-1089ND|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,| Brake Caliper Paint System - BLACK 2016-2019|,|13-1089ND|,|102.02|,|79.95|,||,||,||,||,||,||,| Brake Caliper Paint System - BLACK 2016-2019
The paint has an industry leading heat resistance capability of 900 degrees F.
*** Product images may differ from actual product appearance ***
|,|||-||DDCOAIRINFOR|,|19MAMIENPESU|,| DDMWorks Mazda Miata Cold Air Intake for Jackson Racing Superchargers 1990-1993|,|DDM-05-008|,|289.99|,|225.00|,||,||,|0.000 |,||,||,||,|DDMWorks Mazda Miata Cold Air Intake for Jackson Racing Superchargers 1990-1993
Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make.
The Jackson Racing supercharger is a great way to add some power to your miata, and makes it drive like it should have come from the factory. However, the superchargers intake is not the best design. The original intake pulls hot air close to your exhaust header, up to 30 degrees hotter than ambient, decreasing the air available for the supercharger and lowering the power the supercharger can make. Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make. An extra benefit to our filter assembly is that it takes only a few seconds to remove the pod filter for routine cleaning. Give your supercharged Miata the intake it should have come with. If your car is a 1990-1997 and equipped with cruise control, you will need to relocate the cruise control actuator.
|,|||-||DDCOAIRINFOR2|,|19MAMISUANDU|,| DDMWorks Mazda Miata Cold Air Intake for Jackson Racing Superchargers 1999-2005|,|DDM-05-005|,|289.99|,|224.95|,||,||,|0.000 |,||,||,||,|DDMWorks Mazda Miata Cold Air Intake for Jackson Racing Superchargers 1999-2005
Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make.
The Jackson Racing supercharger is a great way to add some power to your miata, and makes it drive like it should have come from the factory. However, the superchargers intake is not the best design. The original intake pulls hot air close to your exhaust header, up to 30 degrees hotter than ambient, decreasing the air available for the supercharger and lowering the power the supercharger can make. Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make. An extra benefit to our filter assembly is that it takes only a few seconds to remove the pod filter for routine cleaning. Give your supercharged Miata the intake it should have come with. If your car is a 1990-1997 and equipped with cruise control, you will need to relocate the cruise control actuator.
|,|||-||DRDRSIMALIP6|,|DRAGD|,| Drag DR-44 Silver Machined Lip|,|DRAG-DR-44-SML|,|244.95|,|169.95|,||,||,|5.000 |,||,||,||,| Drag DR-44 Silver Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "17.0 Add(+$15.00)"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "42"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-INTERIOR-WINDSHIELD-MIRROR-2009-20131|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,| Genuine Mazda Miata OEM Interior Windshield Mirror 2009-2015|,|B37F-69-220C|,|59.95|,|44.34|,||,||,|0.000 |,||,||,||,| Genuine Mazda Miata OEM Interior Windshield Mirror 2009-2015
Rear View Interior Mirror
Black In Color
Designed To Fit Mazda MX-5 Miata 2009-2015
100% Genuine - Manufactured By Mazda For Mazdas
Item Weight: 2 pounds
Product Dimensions: 11 x 7 x 3 inches
|,|||-||-GENUINE-MAZDA-MIATA-OEM-WHEEL-CENTER-CAP-2001-2003-5-SPOKE-CHROME-16X6-5|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,| Genuine Mazda Miata OEM Wheel Center Cap 2001-2003 5-Spoke Chrome 16x6.5|,|N072-37-190|,|53.62|,|44.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Center Cap 2001-2003 5-Spoke Chrome 16x6.5
Center Cap Fits: 2002 Miata SE Wheel
|,|||-||NJOYCARLIFE|,|SHOP-BY-TOP-MIATA-BRANDS|,|!nJoy Carlife|,||,||,||,||,||,||,||,||,||,||,|||-||1|,||,|.|,||,||,||,||,||,||,||,||,||,||,|||-||19MAMIAUVIAC|,||,|1990-1997 MAZDA MIATA AUDIO & VIDEO ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVIAN|,||,|1990-1997 MAZDA MIATA AUDIO & VIDEO ANTENNA|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVIDA|,||,|1990-1997 MAZDA MIATA AUDIO & VIDEO DASH AND TRIM PANEL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVINA|,||,|1990-1997 MAZDA MIATA AUDIO & VIDEO NAVIGATION DEVICE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVISP|,||,|1990-1997 MAZDA MIATA AUDIO & VIDEO SPEAKERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVIVI|,||,|1990-1997 MAZDA MIATA AUDIO & VIDEO VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRROAC|,||,|1990-1997 MAZDA MIATA BRAKES & ROTORS ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRROBR|,||,|1990-1997 MAZDA MIATA BRAKES & ROTORS BRAKE KITS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRROPA|,||,|1990-1997 MAZDA MIATA BRAKES & ROTORS PADS AND HOSES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRRORE|,||,|1990-1997 MAZDA MIATA BRAKES & ROTORS REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRRORO|,||,|1990-1997 MAZDA MIATA BRAKES & ROTORS ROTORS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRROVI|,||,|1990-1997 MAZDA MIATA BRAKES & ROTORS VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||ACCESSORIES|,||,|1990-1997 MAZDA MIATA CAR CARE & SHOP ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||BATTERY|,||,|1990-1997 MAZDA MIATA CAR CARE & SHOP BATTERY|,||,||,||,||,||,||,||,||,||,|
|,|||-||BOOKS1|,||,|1990-1997 MAZDA MIATA CAR CARE & SHOP BOOKS|,||,||,||,||,||,||,||,||,||,|
|,|||-||CARCARE|,||,|1990-1997 MAZDA MIATA CAR CARE & SHOP CAR CARE|,||,||,||,||,||,||,||,||,||,|
|,|||-||CARCOVERS|,||,|1990-1997 MAZDA MIATA CAR CARE & SHOP CAR COVERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||MICARCASHVIA|,||,|1990-1997 MAZDA MIATA CAR CARE & SHOP VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||MICLFL|,||,|1990-1997 MAZDA MIATA DRIVETRAIN CLUTCHES & FLYWHEELS|,||,||,||,||,||,||,||,||,||,|
|,|||-||MIDI|,||,|1990-1997 MAZDA MIATA DRIVETRAIN DIFFERENTIALS|,||,||,||,||,||,||,||,||,||,|
|,|||-||MIATAINTAKE|,||,|1990-1997 MAZDA MIATA DRIVETRAIN INTAKE|,||,||,||,||,||,||,||,||,||,|
|,|||-||MIREPA|,||,|1990-1997 MAZDA MIATA DRIVETRAIN REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||MISHSH|,||,|1990-1997 MAZDA MIATA DRIVETRAIN SHORT SHIFTERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIDRVIAL|,||,|1990-1997 MAZDA MIATA DRIVETRAIN VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||113105|,|NAEXVIALL|,|1990-1997 Mazda Miata Duraflex Circuit Fender Flares Kit - 4 Piece|,|113105|,|799.98|,|632.00|,||,||,||,||,||,||,|1990-1997 Mazda Miata Duraflex Circuit Fender Flares Kit - 4 Piece
1990-1997 Mazda Miata Duraflex Circuit Fender Flares Kit - 4 Piece - Includes Circuit Front Fender Flares, Circuit Rear Fender Flares.
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
|,|"Shipping Cost" "add (+$165)"|-||-|||-||19MAMIENPEAI|,||,|1990-1997 MAZDA MIATA ENGINE PERFORMANCE AIR INTAKE – FILTERS, THROTTLE BODIES & SPACER|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPECA|,||,|1990-1997 MAZDA MIATA ENGINE PERFORMANCE CAMS, GEARS, UNDERDRIVE PULLEYS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPECO|,||,|1990-1997 MAZDA MIATA ENGINE PERFORMANCE COOLING – RADIATORS, HOSE BELTS, ETC.|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPEIG|,||,|1990-1997 MAZDA MIATA ENGINE PERFORMANCE IGNITION – PLUGS, WIRES, COILS & UPGRADES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPEOI|,||,|1990-1997 MAZDA MIATA ENGINE PERFORMANCE OIL – COILERS, FILTERS, CAPES & MORE|,||,||,||,||,||,||,||,||,||,|
|,|||-||ENPE191|,||,|1990-1997 MAZDA MIATA ENGINE PERFORMANCE PACKAGE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPESU|,||,|1990-1997 MAZDA MIATA ENGINE PERFORMANCE SUPERCHARGERS, UPGRADES & ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||ENPE19|,||,|1990-1997 MAZDA MIATA ENGINE PERFORMANCE VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXCACO|,||,|1990-1997 MAZDA MIATA EXHAUST CATALYTIC CONVERTERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXGAAN|,||,|1990-1997 MAZDA MIATA EXHAUST GASKETS AND HARDWARE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXHE|,||,|1990-1997 MAZDA MIATA EXHAUST HEADERS & CONNECTING PIPE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXREPA|,||,|1990-1997 MAZDA MIATA EXHAUST REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXSYMU|,||,|1990-1997 MAZDA MIATA EXHAUST SYSTEMS, MUFFLERS, PIPES & TIPS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXVEAL|,||,|1990-1997 MAZDA MIATA EXHAUST VEIW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAEXAC|,||,|1990-1997 MAZDA MIATA EXTERIOR ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAEXBAGR|,||,|1990-1997 MAZDA MIATA EXTERIOR BADGES & GRAPHICS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAEXBOST|,||,|1990-1997 MAZDA MIATA EXTERIOR BODY STYLING|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAEXFULI|,||,|1990-1997 MAZDA MIATA EXTERIOR FUEL LIDS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAEXGRBRA|,||,|1990-1997 MAZDA MIATA EXTERIOR GRILL & BRA|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAEXLURA|,||,|1990-1997 MAZDA MIATA EXTERIOR LUGGAGE RACK|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAEXSTBA|,||,|1990-1997 MAZDA MIATA EXTERIOR STYLE BARS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAACCESSORIES|,||,|1990-1997 MAZDA MIATA INTERIOR ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAAUDIO|,||,|1990-1997 MAZDA MIATA INTERIOR AUDIO AND VIDEO|,||,||,||,||,||,||,||,||,||,|
|,|||-||NABOOTS|,||,|1990-1997 MAZDA MIATA INTERIOR BOOTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NADASHBOARD|,||,|1990-1997 MAZDA MIATA INTERIOR DASHBOARD|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAFLOORING|,||,|1990-1997 MAZDA MIATA INTERIOR FLOORING|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAKNOBS|,||,|1990-1997 MAZDA MIATA INTERIOR KNOBS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NAPEDALS|,||,|1990-1997 MAZDA MIATA INTERIOR PEDALS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NASEATSDOOR|,||,|1990-1997 MAZDA MIATA INTERIOR SEATS AND DOOR|,||,||,||,||,||,||,||,||,||,|
|,|||-||NASTWH|,||,|1990-1997 MAZDA MIATA INTERIOR STEERING WHEELS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NASTORAGE|,||,|1990-1997 MAZDA MIATA INTERIOR STORAGE AND BAGS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NASTYLEBARS|,||,|1990-1997 MAZDA MIATA INTERIOR STYLE BARS|,||,||,||,||,||,||,||,||,||,|
|,|||-||INSETE|,||,|1990-1997 MAZDA MIATA INTERIOR VIEW ALL|,|MAZDA-MIATA-INTERIOR|,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIMAPA|,|MAPA19|,|1990-1997 MAZDA MIATA MAINTENANCE PACKAGES|,||,||,||,||,||,||,||,||,||,||,|||-||19MAMIMAVEAL|,||,|1990-1997 MAZDA MIATA MAINTENANCE VEIW ALL|,||,||,||,||,||,||,||,||,||,||,|||-||19MAMIPECLFL|,||,|1990-1997 MAZDA MIATA PERFORMANCE CLUTCHES & FLYWHEELS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIROBASA1|,||,|1990-1997 MAZDA MIATA ROLL BARS & SAFETY ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||PARTS---PERFORMANCE-ROLL-BARS---SAFETY-BOSS-FROG|,||,|1990-1997 MAZDA MIATA ROLL BARS & SAFETY BOSS FROG PRODUCTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||PARTS---PERFORMANCE-ROLL-BARS---SAFETY-HARD-DOG|,||,|1990-1997 MAZDA MIATA ROLL BARS & SAFETY HARD DOG PRODUCTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIROBASA2|,||,|1990-1997 MAZDA MIATA ROLL BARS & SAFETY ROLL CAGE KIT |,||,||,||,||,||,||,||,||,||,|
|,|||-||SAFETY|,||,|1990-1997 MAZDA MIATA ROLL BARS & SAFETY SAFETY PRODUCTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIROBASA|,||,|1990-1997 MAZDA MIATA ROLL BARS & SAFETY VEIW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS1|,||,|1990-1997 MAZDA MIATA SUSPENSION AND STEERING BRACES, STRUTS, CHASSIS, & END LINKS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS5|,||,|1990-1997 MAZDA MIATA SUSPENSION AND STEERING BUSHINGS AND KITS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS2|,||,|1990-1997 MAZDA MIATA SUSPENSION AND STEERING REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS3|,||,|1990-1997 MAZDA MIATA SUSPENSION AND STEERING SHOCKS, SPRINGS, COIL OVERS, AND CAMBER KITS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS4|,||,|1990-1997 MAZDA MIATA SUSPENSION AND STEERING SPACERS, STUD KITS AND ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS|,||,|1990-1997 MAZDA MIATA SUSPENSION AND STEERING VEIW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMITIANDW2|,||,|1990-2009 MAZDA MIATA TIRES AND WHEELS ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMITIANDW|,||,|1990-2009 MAZDA MIATA TIRES AND WHEELS CAPS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMITIANDW1|,||,|1990-2009 MAZDA MIATA TIRES AND WHEELS LUG NUTS AND LOCKS|,||,||,||,||,||,||,||,||,||,|
|,|||-||MAMITIANDWHF|,||,|1990-2009 MAZDA MIATA TIRES, WHEELS, AND ACCESSORIES VEIW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVIAC1|,||,|1999-2005 MAZDA MIATA AUDIO & VIDEO ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVIAN1|,||,|1999-2005 MAZDA MIATA AUDIO & VIDEO ANTENNA|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVIDA1|,||,|1999-2005 MAZDA MIATA AUDIO & VIDEO DASH AND TRIM PANEL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVINA1|,||,|1999-2005 MAZDA MIATA AUDIO & VIDEO NAVIGATION DEVICE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIAUVISP1|,||,|1999-2005 MAZDA MIATA AUDIO & VIDEO SPEAKERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRROAC1|,||,|1999-2005 MAZDA MIATA BRAKES & ROTORS ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRROBR1|,||,|1999-2005 MAZDA MIATA BRAKES & ROTORS BRAKE KITS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRROPA1|,||,|1999-2005 MAZDA MIATA BRAKES & ROTORS PADS AND HOSES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRRORE1|,||,|1999-2005 MAZDA MIATA BRAKES & ROTORS REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRROVI1|,||,|1999-2005 MAZDA MIATA BRAKES & ROTORS VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIBRRORO1|,||,|1999-2005 MAZDA MIATA BRAKES & ROTORS, ROTORS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMICARCAS1|,||,|1999-2005 MAZDA MIATA CAR CARE & SHOP ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMICARCAS4|,||,|1999-2005 MAZDA MIATA CAR CARE & SHOP BATTERY|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMICARCAS2|,||,|1999-2005 MAZDA MIATA CAR CARE & SHOP BOOKS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMICARCAC|,||,|1999-2005 MAZDA MIATA CAR CARE & SHOP CAR CARE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMICARCAS3|,||,|1999-2005 MAZDA MIATA CAR CARE & SHOP CAR COVERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMICARCAS|,||,|1999-2005 MAZDA MIATA CAR CARE & SHOP VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIDRCLFL|,||,|1999-2005 MAZDA MIATA DRIVETRAIN CLUTCHES & FLYWHEELS|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|||-||19MAMIDRDI|,||,|1999-2005 MAZDA MIATA DRIVETRAIN DIFFERENTIALS|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|||-||19MAMIDRIN|,||,|1999-2005 MAZDA MIATA DRIVETRAIN INTAKE|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|||-||19MAMIDRREPA|,||,|1999-2005 MAZDA MIATA DRIVETRAIN REPLACEMENT PARTS|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|||-||19MAMIDRSHSH|,||,|1999-2005 MAZDA MIATA DRIVETRAIN SHORT SHIFTERS|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|||-||19MAMIDRVIAL1|,||,|1999-2005 MAZDA MIATA DRIVETRAIN VIEW ALL|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|||-||19MAMIAIRFIA|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE AIR INTAKE – FILTERS, THROTTLE BODIES & SPACER|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPECA1|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE CAMS, GEARS, UNDERDRIVE PULLEYS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIRAHOBE|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE COOLING – RADIATORS, HOSE BELTS, ETC.|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIPLWICO|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE IGNITION – PLUGS, WIRES, COILS & UPGRADES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPEOI1|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE OIL – COILERS, FILTERS, CAPES & MORE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIPEPA|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE PACKAGE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPEPA|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE PACKAGE|,||,||,||,||,||,||,||,||,||,||,|||-||19MAMISUANDU|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE SUPERCHARGERS, UPGRADES & ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIENPEVI|,||,|1999-2005 MAZDA MIATA ENGINE PERFORMANCE VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXCACO1|,||,|1999-2005 MAZDA MIATA EXHAUST CATALYTIC CONVERTERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXGAAN1|,||,|1999-2005 MAZDA MIATA EXHAUST GASKETS AND HARDWARE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXHECO|,||,|1999-2005 MAZDA MIATA EXHAUST HEADERS & CONNECTING PIPE|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXREPA1|,||,|1999-2005 MAZDA MIATA EXHAUST REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXSYMU1|,||,|1999-2005 MAZDA MIATA EXHAUST SYSTEMS, MUFFLERS, PIPES & TIPS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMIEXVEAL1|,||,|1999-2005 MAZDA MIATA EXHAUST VEIW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBACCESSORIES|,||,|1999-2005 MAZDA MIATA EXTERIOR ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBBAANDGR|,||,|1999-2005 MAZDA MIATA EXTERIOR BADGES AND GRAPHICS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBBODYSTYLING|,||,|1999-2005 MAZDA MIATA EXTERIOR BODY STYLING|,||,||,||,|1999-2005 MAZDA MIATA EXTERIOR BODY STYLING|,||,||,||,||,||,|
|,|||-||NBFUELLIDS|,||,|1999-2005 MAZDA MIATA EXTERIOR FUEL LIDS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBGRILLANDBRA|,||,|1999-2005 MAZDA MIATA EXTERIOR GRILL AND BRA|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBLIGHTING|,||,|1999-2005 MAZDA MIATA EXTERIOR LIGHTING|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBLURAEX|,||,|1999-2005 MAZDA MIATA EXTERIOR LUGGAGE RACK|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBVIEWALL|,||,|1999-2005 MAZDA MIATA EXTERIOR PARTS VIEW ALL |,||,||,||,|1999-2005 MAZDA MIATA EXTERIOR PARTS VIEW ALL |,||,||,||,||,||,|
|,|||-||NBSTYLEBARS|,||,|1999-2005 MAZDA MIATA EXTERIOR STYLE BARS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINAC1|,||,|1999-2005 MAZDA MIATA INTERIOR ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINAU|,||,|1999-2005 MAZDA MIATA INTERIOR AUDIO|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINBO|,||,|1999-2005 MAZDA MIATA INTERIOR BOOTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINDA|,||,|1999-2005 MAZDA MIATA INTERIOR DASHBOARD|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINFL|,||,|1999-2005 MAZDA MIATA INTERIOR FLOORING|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINKN|,||,|1999-2005 MAZDA MIATA INTERIOR KNOBS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINPE|,||,|1999-2005 MAZDA MIATA INTERIOR PEDALS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINSEDO|,||,|1999-2005 MAZDA MIATA INTERIOR SEATS & DOOR|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINSTWH|,||,|1999-2005 MAZDA MIATA INTERIOR STEERING WHEELS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINSTBA1|,||,|1999-2005 MAZDA MIATA INTERIOR STORAGE & BAGS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINSTBA|,||,|1999-2005 MAZDA MIATA INTERIOR STYLE BARS|,||,||,||,||,||,||,||,||,||,|
|,|||-||NBINVIALL|,||,|1999-2005 MAZDA MIATA INTERIOR VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMICLANDF|,||,|1999-2005 MAZDA MIATA PERFORMANCE CLUTCHES & FLYWHEELS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS7|,||,|1999-2005 MAZDA MIATA SUSPENSION AND STEERING BRACES, STRUTS, CHASSIS, & END LINKS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS11|,||,|1999-2005 MAZDA MIATA SUSPENSION AND STEERING BUSHINGS AND KITS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS8|,||,|1999-2005 MAZDA MIATA SUSPENSION AND STEERING REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS9|,||,|1999-2005 MAZDA MIATA SUSPENSION AND STEERING SHOCKS, SPRINGS, COIL OVERS, AND CAMBER KITS|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS10|,||,|1999-2005 MAZDA MIATA SUSPENSION AND STEERING SPACERS, STUD KITS AND ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMISUANDS6|,||,|1999-2005 MAZDA MIATA SUSPENSION AND STEERING VEIW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||19MAMXMIAUVI|,||,|1999-2005 MAZDA MX-5 MIATA AUDIO & VIDEO VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||2020NEWPA|,||,|2006 & 2007 New Parts!!|,||,||,||,|Check out these great new parts!|,||,||,||,||,||,||,|||-||19MAMIEXLURA|,||,|2006-2008 MAZDA MIATA EXTERIOR LUGGAGE RACK|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIBRROVI1|,||,|2006-2009 MAZDA MIATA BRAKES & ROTORS VIEW ALL|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIDRSHSH1|,||,|2006-2009 MAZDA MIATA DRIVETRAIN SHORT SHIFTERS|,|newitem168742400|,||,||,||,||,||,||,||,||,||,|||-||20MAMIENPEAI1|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE AIR INTAKE – FILTERS, THROTTLE BODIES & SPACER|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIENPEAI|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE AIR INTAKE – FILTERS, THROTTLE BODIES & SPACER|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIENPECA|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE CAMS, GEARS, UNDERDRIVE PULLEYS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIENPECO|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE COOLING – RADIATORS, HOSE BELTS, ETC.|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIENPEIG|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE IGNITION – PLUGS, WIRES, COILS & UPGRADES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIENPEOI|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE OIL – COILERS, FILTERS, CAPES & MORE|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIENPEPA|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE PACKAGE|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIENPESU|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE SUPERCHARGERS, UPGRADES & ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIENPEVI1|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIENPEVI|,||,|2006-2009 MAZDA MIATA ENGINE PERFORMANCE VIEW ALL|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIPECLFL|,||,|2006-2009 MAZDA MIATA PERFORMANCE CLUTCHES & FLYWHEELS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMISUANDS1|,||,|2006-2009 MAZDA MIATA SUSPENSION AND STEERING BRACES, STRUTS, CHASSIS, & END LINKS|,||,||,||,|MAZDA MIATA SUSPENSION AND STEERING BRACES, STRUTS, CHASSIS, & END LINKS 2006-2013|,||,||,||,||,||,|
|,|||-||20MAMISUANDS4|,||,|2006-2009 MAZDA MIATA SUSPENSION AND STEERING SPACERS, STUD KITS AND ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMISUANDS|,||,|2006-2009 MAZDA MIATA SUSPENSION AND STEERING VEIW ALL|,||,||,||,|MAZDA MX-5 MIATA SUSPENSION AND STEERING VEIW ALL 2006-2013|,||,||,||,||,||,|
|,|||-||20MXMI|,||,|2006-2009 MX-5 MIATA|,||,||,||,||,||,||,||,||,||,||,|||-||20MXMI1|,||,|2006-2009 MX-5 Miata|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIBRROPA|,||,|2006-2010 MAZDA MIATA BRAKES & ROTORS PADS AND HOSES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMICARCAS3|,||,|2006-2010 MAZDA MIATA CAR CARE & SHOP CAR COVERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXAC|,||,|2006-2010 MAZDA MIATA EXTERIOR ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXBAAN|,||,|2006-2010 MAZDA MIATA EXTERIOR BADGES AND GRAPHICS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXBOST|,||,|2006-2010 MAZDA MIATA EXTERIOR BODY STYLING|,||,||,||,||,||,||,||,||,|20mimiexpa 20mamiexac 20mamiexbaan 20mamiexbost 20mamiexfuli 20mamiexgran 20mamiexli 19mamiexlura 20mamiexstba
|,|
|,|||-||20MAMIEXFULI|,||,|2006-2010 MAZDA MIATA EXTERIOR FUEL LIDS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXGRAN|,||,|2006-2010 MAZDA MIATA EXTERIOR GRILL AND BRA|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXLI|,||,|2006-2010 MAZDA MIATA EXTERIOR LIGHTING|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMISUANDS2|,||,|2006-2010 MAZDA MIATA SUSPENSION AND STEERING REPLACEMENT PARTS|,||,||,||,|MAZDA MX-5 MIATA SUSPENSION AND STEERING REPLACEMENT PARTS 2006-2015|,||,||,||,||,||,|
|,|||-||20MAMIINAC|,||,|2006-2013 MAZDA MIATA INTERIOR ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINAU|,||,|2006-2013 MAZDA MIATA INTERIOR AUDIO|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINBO|,||,|2006-2013 MAZDA MIATA INTERIOR BOOTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINDA|,||,|2006-2013 MAZDA MIATA INTERIOR DASHBOARD|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINFL|,||,|2006-2013 MAZDA MIATA INTERIOR FLOORING|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINKN|,||,|2006-2013 MAZDA MIATA INTERIOR KNOBS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINPE|,||,|2006-2013 MAZDA MIATA INTERIOR PEDALS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINSEDO|,||,|2006-2013 MAZDA MIATA INTERIOR SEATS & DOOR|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINSTWH|,||,|2006-2013 MAZDA MIATA INTERIOR STEERING WHEELS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINSTBA1|,||,|2006-2013 MAZDA MIATA INTERIOR STORAGE & BAGS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINSTBA|,||,|2006-2013 MAZDA MIATA INTERIOR STYLE BARS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIINVIAL|,||,|2006-2013 MAZDA MIATA INTERIOR VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXHECO|,||,|2006-2014 MAZDA MIATA EXHAUST HEADERS & CONNECTING PIPE|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIAUVIAC|,||,|2006-2015 MAZDA MIATA AUDIO & VIDEO ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIAUVIAN|,||,|2006-2015 MAZDA MIATA AUDIO & VIDEO ANTENNA|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIAUVIDA|,||,|2006-2015 MAZDA MIATA AUDIO & VIDEO DASH AND TRIM PANEL|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIAUVINA|,||,|2006-2015 MAZDA MIATA AUDIO & VIDEO NAVIGATION DEVICE|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIAUVISP|,||,|2006-2015 MAZDA MIATA AUDIO & VIDEO SPEAKERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIBRROAC|,||,|2006-2015 MAZDA MIATA BRAKES & ROTORS ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIBRROBR|,||,|2006-2015 MAZDA MIATA BRAKES & ROTORS BRAKE KITS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIBRRORE|,||,|2006-2015 MAZDA MIATA BRAKES & ROTORS REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIBRRORO|,||,|2006-2015 MAZDA MIATA BRAKES & ROTORS ROTORS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIBRROVI|,||,|2006-2015 MAZDA MIATA BRAKES & ROTORS VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMICARCAS1|,||,|2006-2015 MAZDA MIATA CAR CARE & SHOP ACCESSORIES|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMICARCAS5|,||,|2006-2015 MAZDA MIATA CAR CARE & SHOP BATTERY|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMICARCAS2|,||,|2006-2015 MAZDA MIATA CAR CARE & SHOP BOOKS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMICARCAS4|,||,|2006-2015 MAZDA MIATA CAR CARE & SHOP CAR CARE|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMICARCAS|,||,|2006-2015 MAZDA MIATA CAR CARE & SHOP VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIDRCLFL|,||,|2006-2015 MAZDA MIATA DRIVETRAIN CLUTCHES & FLYWHEELS|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIDRDI|,||,|2006-2015 MAZDA MIATA DRIVETRAIN DIFFERENTIALS|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIDRIN|,||,|2006-2015 MAZDA MIATA DRIVETRAIN INTAKE|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIDRREPA|,||,|2006-2015 MAZDA MIATA DRIVETRAIN REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIDRSHSH|,||,|2006-2015 MAZDA MIATA DRIVETRAIN SHORT SHIFTERS|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIDRVIAL|,||,|2006-2015 MAZDA MIATA DRIVETRAIN VIEW ALL|,||,||,||,||,||,||,||,||,||,||,|||-||20MAMIEXCACO|,||,|2006-2015 MAZDA MIATA EXHAUST CATALYTIC CONVERTERS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXGAAN|,||,|2006-2015 MAZDA MIATA EXHAUST GASKETS AND HARDWARE|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXREPA|,||,|2006-2015 MAZDA MIATA EXHAUST REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXSYMU|,||,|2006-2015 MAZDA MIATA EXHAUST SYSTEMS, MUFFLERS, PIPES & TIPS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXVEAL|,||,|2006-2015 MAZDA MIATA EXHAUST VEIW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MIMIEXPA|,||,|2006-2015 MAZDA MIATA EXTERIOR PARTS VIEW ALL |,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMIEXSTBA|,||,|2006-2015 MAZDA MIATA EXTERIOR STYLE BARS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMISUANDS5|,||,|2006-2015 MAZDA MIATA SUSPENSION AND STEERING BUSHINGS AND KITS|,||,||,||,||,||,||,||,||,||,|
|,|||-||20MAMXMIAUVI|,||,|2006-2015 MAZDA MX-5 MIATA AUDIO & VIDEO VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||MAZDA-MX-5-MIATA-DURAFLEX-50-MM-CIRCUIT-FRONT-FENDER-FLARES-2016-2017-2-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|2016-2021 Mazda Miata Duraflex TKO RBS Front Fender Flares - 4 Piece 2016-2019 - (2 Piece)|,|115715|,|869.00|,|628.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Duraflex 50mm Circuit Front Fender Flares 2016-2019 - (2 Piece)
Part Description
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Modified Aerodynamics
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$159)"|-||-|||-||MAZDA-MX-5-MIATA-DURAFLEX-CIRCUIT-REAR-DIFFUSER-2016-2017---1-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|2016-2021 Mazda Miata Duraflex TKO RBS Rear Lip - 1 Piece|,|115709|,|599.99|,|344.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Duraflex Circuit Rear Diffuser 2016-2019 - (1 Piece)
Part Description
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Modified Aerodynamics
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$139)"|-||-|||-||3IN1BADISW|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|3 in 1 Battery Disconnect Switch|,|818-203|,|34.95|,|25.02|,||,||,|0.000 |,||,|sdhsdfh|,||,|This ingenious little device quickly disconnects your battery. You can use it as an anti-theft device, a safety device and also as a battery saver when your car is not being used for an extended period of time.
The great thing about our switch is that it also comes with a 125 amp fuse which supplies enough power to maintain your stereo presets and code so you don't have to keep reprogramming them!
|,|||-||SK-300MC-3|,|20MAMIINKN|,|5 Speed Multi-Color Universal|,|SK-300MC-3|,|52.99|,|48.99|,||,||,|0.000 |,||,||,||,|5 Speed Multi-Color Universal
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-300MC|,|20MAMIINKN|,|5 Speed Multi-Color Universal|,|sk-300mc|,|53.99|,|48.99|,||,||,|0.000 |,||,||,||,|5 Speed Multi-Color Universal
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|"Do you want Heavy Weighted Knob?" "Select Here" "Yes add(+$10)"|-||-|||-||507STYLE|,||,|507 Style|,|507style|,||,||,||,||,||,||,||,||,||,|||-||SK-990SS|,|20MAMIINKN|,|50mm 1.5 lbs Shift Knob Brush Stainless Steel|,|SK-990SS|,|64.99|,|54.05|,||,||,|0.000 |,||,||,||,|50mm 1.5 lbs Shift Knob Brush Stainless Steel
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-900BC|,|20MAMIINKN|,|50mm 230g Black Carbon Fiber|,|SK-900BC|,|85.00|,|75.00|,||,||,|0.000 |,||,||,||,|50mm 230g Black Carbon Fiber
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-900SL|,|20MAMIINKN|,|50mm 230g Brush Aluminum|,|SK-900SL|,|52.99|,|39.05|,||,||,|0.000 |,||,||,||,|50mm 230g Brush Aluminum
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-900T|,|20MAMIINKN|,|50mm 230g Titanium Aluminum|,|SK-900T|,|53.99|,|39.05|,||,||,|0.000 |,||,||,||,|50mm 230g Titanium Aluminum
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||TEAM5ZIGEN|,|SHOP-BY-TOP-MIATA-BRANDS|,|5Zigen USA|,||,||,||,||,||,||,||,||,||,||,|||-||SK-300MC-1|,|20MAMIINKN|,|6 Speed Multi-Color Universal|,|SK-300MC-1|,|52.99|,|48.99|,||,||,|0.000 |,||,||,||,|6 Speed Multi-Color Universal
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||920SPMICLSP|,|SHOP-BY-SPEC-MIATA-PARTS|,|9.1.8. 2009 Spec Miata Class Specifications|,||,||,||,||,||,||,||,||,||,|
9.1.8. 2009 Spec Miata Class Specifications
These specifications are part of the SCCA GCR and all automobiles shall conform to GCR Section 9.
A. PURPOSE AND INTENT
The Spec Miata (SM) class is intended to provide the membership with the opportunity to compete in low cost, production-based cars with limited modifications, suitable for racing competition.
The rules are intentionally designed to be more open than the Showroom Stock class but more restricted than the Improved Touring class.
The vehicle identification number (VIN) shall correspond with the model-year automobile classified. VIN plates or stampings shall remain in place. There must be a minimum of two (2) VIN plates or stampings that correspond with the model year automobile classified.
B. CLASSIFIED CARS AND WEIGHTS
Classified cars and weights are listed on the Spec Miata Specification Table.
Cars are to be weighed with the driver and required ballast. See GCR Section 9.3.8.
C. AUTHORIZED MODIFICATIONS
The following items represent the only modifications and safety items permitted and/or required on Spec Miata automobiles other than safety items as required in Section 9. No permitted component/modification shall additionally perform a prohibited function. No updating or backdating of cars, models, specifications, and/or components thereof shall be permitted except as specifically authorized in these specifications.
A Shop Manual for the specific make, model, and year of automobile is required to be in the possession of each entrant. The manual is intended to aid Scrutineers in identifying parts and the configuration of the automobile. Overhaul procedures that in the slightest way would increase performance are not to be utilized; e.g., porting, etc. Blueprinting and balancing are inconsistent with the philosophy of this class and are not permitted.
All adjustments shall be at the manufacturer’s specification and/or within the manufacturer’s specified tolerances except as permitted within the SMCS.
Stock replacement parts may be obtained from sources other than the manufacturer provided they are the exact equivalent of the original parts. The intent of this rule is to allow the competitor to obtain replacement parts from standard industry outlets, e.g., auto-parts distributors, rather than from the manufacturer. It is not intended to allow parts that do not meet all dimensional and material specifications of new parts from the manufacturer.
The application and/or use of any painting, coating, plating, or impregnating substance (i.e. anti-friction, thermal barrier, oil shedding coatings, chrome, anodizing, etc.) to any internal engine surface, transmission, differential, internal or external surfaces of the exhaust manifold or down-tube, is prohibited.
1. Engine Modifications
a. Induction System
1.All air entering the intake tract shall pass through the fuel injection air inlet.
2.1.6L cars may replace the stock air box with a cone style air filter assembly. The air filter element is unrestricted. No ducting or baffling of air to the air filter is permitted.
3.1.6L cars may open and adjust, but not modify, the OEM airflow meter. For 1.6L cars, the position of the air flow meter may be moved provided it remains attached to the unmodified factory intake tube.
4.1.8L cars must use the stock air box, but the air filter element is unrestricted.
5.1.8L cars shall use an air restrictor. The throttle restrictor shall be placed between the throttle body and plenum. All intake air shall pass through the restrictor plate. Restrictor plates must be the proper size as listed in the Specification Table, must be from Mazdaspeed Motorsports Development, and must not be modified.
b. Fluid hoses and clamps, oil filters, fuel filters, and belts (fan, alternator, etc.) may be substituted with others of equivalent OEM specifications.
c. Fuel System
1.Unleaded fuel filler trap door and restrictor plate in filler neck may be removed.
2.Refer to GCR Section 9.3.25 for permitted fuel specifications and for the required fuel sample acquisition port.
d. Ignition/Electrical System
1.Spark plugs and spark plug wires may be substituted.
2.Ignition timing is unrestricted within stock adjustment capability.
3.Batteries may be replaced with those of an alternate manufacturer, provided they are of similar amp-hour capacity, size, and weight and are fitted in the standard location. Additional battery hold-down devices may be used, and are strongly recommended.
e. Exhaust System
The factory exhaust system beyond the OEM front down pipe may be replaced, provided:
a. Said replacement system retains the original configuration, e.g. single tube design, and the tubing diameter is a maximum of 2.25” outside diameter.
b. The pipe may end anywhere after the rear subframe. Forward of the rear subframe, the pipe must follow the original path of the OEM exhaust system.
c. No expansion chambers. A single muffler may be added.
d. The system meets all event specific sound requirements.
e. A cat replacement tube may be installed. The tube shall not exceed 17.5” in length and have an outside diameter no greater than 2.375”.
1.Original exhaust system heat shields may be removed.
2.The post catalytic converter oxygen sensor may be
disabled, replaced, or removed; the resulting hole (if present) may be plugged. 1999-05 Miatas with California emissions equipment may substitute the OEM CA exhaust manifold and catalytic converter with the Federal OEM exhaust manifold.
f. Clutch System and Flywheel: All cars shall use either the stock OEM pressure plate appropriate model year or the ACT pressure plate (Mazdaspeed p/n: 0000-0205401-SS (1.6L cars) or 0000-0205404-AC (1.8L cars)). The unmodified pressure plate shall be bolted directly to the appropriate stock, unmodified flywheel. The 94 model year may utilize the flywheel from the 95-05 model years. If the 1994 flywheel is used it shall weigh a minimum of 18.5 lbs. Any clutch disk may be used. The minimum weight (including the pilot bearing) is 17.6 lbs for the 1.6L and 17.1 lbs for the 1.8L.
g. Lubricants may be substituted with any lubricant. Oil additives are unrestricted.
h. The engine block and/or cylinder head may be decked/milled to achieve the factory specified compression ratio for the correct model year as listed on the specification table.
i. Camshafts shall comply with the Official Camshaft Data as supplied by the SCCA Club Racing Tech Department.
j. Cast iron cylinder liners (sleeves) may be installed to restore damaged or worn cylinder bores to the original dimension.
2. Cooling System
a. Any radiator may be used, provided it is mounted in the original location, maintains the same plane as the original core and requires no body or structure modifications to install. Any openings created by fittng an alternate radiator shall be blocked to prevent air from entering the engine compartment. The stock cooling fan(s) must be maintained. At least one functional stock OEM cooling fan must be mounted in one of the stock locations.
b. Thermostats may be modified, removed, or replaced.
c. All cars may install the Upper Radiator Seal, p/n NA75-50-OK7A
d. A radiator screen of one-fourth (1/4) inch minimum mesh may be added in front of the radiator and contained within the bodywork.
e. The factory air conditioning systems may be removed. Items that serve a dual purpose, such as the alternator/air conditioning compressor bracket, may not be substituted.
f. Engine coolant fluid, coolant/heater hoses and clamps may be substituted. Heater core may be bypassed. It may not be modified or removed. Heater water control valve(s) may be added or substituted.
3. Transmission/Final Drive
a. Transmission and final drive ratios must remain stock for the year of car. 1999-up cars shall only use the 5 speed transmission and the 4.3 differential ratio. All cars may use the stock unmodified OEM open differential or one of the approved alternates listed below.
b. 1990 to 1993 Miatas may use the stock, unmodified viscous limited slip differential or the MAZDASPEED Motorsports Development limited slip differential, part number #QN10-64-A00 (previously TOY1-27-200 & 0000-02- 5501).
c. 1994 and newer cars may use the stock Torsen limited slip differential.
d. The 90-93 Miatas may convert to the 99-05 differential housing and the 4.3 differential gear ratio from the 99-05 model years. This conversion includes the driveshaft and half-shafts. The original 90-93 model rear suspension uprights must be retained.
e. Lubricants may be substituted with any lubricant.
4. Chassis
Suspension modifications are limited to the addition of the MAZDASPEED Motorsports Development “Spec Miata kit” and those modifications detailed in this area.
a. MAZDASPEED Motorsports Development Spec Miata kit 1990-93 1.6 DOHC K-SPEC-M5-SUSP 1994-97 1.8 DOHC K-SPEC-M5-SUS8 1999-up 1.8 DOHC K-SPEC-M5-SUS9
The following is a breakdown of components supplied within these kits. All parts numbers are MAZDASPEED Motorsports Development parts numbers. No substitution of parts is allowed. The kits must be used in their entirety.
1.Shocks Front Bilstein 0000-04-5225-BL Rear Bilstein 0000-04-5226-BL
2.Springs Front Eibach ERS 700 lbs/6” 0000-04-9700-06 Rear Eibach ERS 325 lbs/7” 0000-04-9325-07
3.Coil-Over kit Front/Rear 0000-04-5402AW
4.Anti-Roll Bars K-SPEC-M5-SUSP Eibach kit - front / rear bars 0000-04-5302-EB Front 24mm Adjustable Rear 15mm Adjustable K-SPEC-M5-SUS8 Eibach kit - front / rear bars 0000-04-5303-EB Front 27mm non-Adjustable Rear 15mm Adjustable K-SPEC-M5-SUSP9 Eibach kit – front / rear bars 000-04-5304-EB Front 27mm non-Adjustable Rear 15mm Adjustable
b. All cars shall use unmodified Mazdaspeed bump stop (Part # 0000-04-5993AW).
1999-up cars shall use the bump stops from the Mazdaspeed kit (p/n 0000-04-5993-AW) in conjunction with the 1999-up stock upper mount assembly consisting of the upper mount (p/n: NC10-28-340C), the upper mount bushing (p/n: NC10-28-776) and the upper mount washer (p/n: NC10-28-774), and shock body spacer over the shock shaft (p/n 1234-56-789-AW). All other OEM upper mounting hardware shall be discarded. 1990-1997 cars may use the bump stops from the Mazdaspeed kit (p/n 0000-04-5993-AW) in conjunction with the 1999-up stock upper mount assembly consisting of the upper mount (p/n: NC10-28-340C), the lower mount bushing (p/n: NC10-28-776) and the upper mount washer (p/n: NC10-28-774). Non-OEM equivalents may be used in place of the upper mount, upper mount bushing, and upper mount washer only. No other modifications are allowed.
A metal or delrin plastic spacer as shown below may be added between the Mazda bump stop and the 1999 shock hat. The 0.31” measurement is +/- 0.01 in. All other measurements are non-critical and are shown for clarification purposes only. In addition, a 3/8” steel hardware washer may be installed between the shock shaft and the bump stop. The washer shall be a maximum of 1/8” thick.
c. Subframe braces may be updated to stock 1997 configuration utilizing the MAZDASPEED Motorsports Development Spec Miata kit.
d. Anti-roll bar links may be replaced and may be adjustable, but the attachment points must remain stock. The control arms and specified anti-roll bar may not be modified. One end of the sway bar(s) may be disconnected as a suspension tuning aid. The bar must remain in place and be solidly attached to the suspension on one end.
e. Suspension alignments (camber, caster, toe) are unrestricted within the limits of the unmodified factory adjustments. Minimum ride height is unrestricted.
f. No relocation or reinforcement of any suspension component or mounting points is permitted.
g. Hardware items (nuts & bolts) may be replaced by similar items performing the same fastening function(s).
h. Manual or power steering racks may be used. Power steering racks may be converted to manual by removing all power steering components.
i. Towing eyes per GCR Section 9.3.46 are required. Stock towing eyes may be modified, replaced, or removed but may serve no other purpose.
j. Hubcaps and wheel trim shall be removed.
k. All chassis/structural/electrical repairs, if performed, shall be in concurrence with factory procedures, specifications, and dimensions. Unless specifically authorized by the manufacturer for repair or allowed by these rules, no reinforcement, i.e., seam welding, material addition, etc., is permitted.
l. The front shock tower connector/brace is not permitted on the 1999 and newer cars.
5. Brakes
a. Backing plates and dirt shields may be ventilated or removed.
b. Brake lines may be replaced with steel lines or Teflon lined metal braided hose.
c. Cars with antilock braking systems must have the system disabled as specified in GCR 9.3.11.
d. Parking brake mechanisms, and actuating components may be removed.
e. Brake pads and brake fluid are unrestricted
f. 2001 and newer cars must use the 255mm(F) and 252mm(R) brakes. The larger brakes 269.5mm(F) and 267.9mm(R) are not permitted.
6. Wheels/Tires
Any wheel/tire may be used within the following limitations:
a. Required rim diameter is fifteen (15) inches. Maximum rim width is seven (7) inches. Minimum weight of wheel shall be 13 lbs without spacers.
b. Other than the stock 15” Mazda steel wheel, all wheels must be one-piece metal castings (not multi-piece wheels, bolted, riveted or welded together).
c. Tires:
1.1. National Competition All cars shall use the Toyo R888 (205/50R15)
2.2. Regional Competition Any DOT approved tire is permitted. Racing, recapped, or regrooved tires are not allowed. Tire size is unrestricted. The only modifications allowed to tires are having treads “shaved” or “trued.” Individual regions may require spec tires for regional races. Supplemental regulations for specific events should be checked.
d. The front track shall not exceed 1450 mm. The rear track shall not exceed 1465 mm for the 90-97 model years and 1475 mm for the 99-05. Aftermarket wheel studs, lug nuts, and wheel spacers are permitted. If spacers are used they shall be no greater than 13 mm and equal on all four corners (i.e. no offset stagger side to side). e. Tire tread (that portion of the tire that contacts the ground under static conditions) shall not protrude beyond the fender opening when viewed from the top perpendicular to the ground. To determine compliance, the vehicle should be rolled through a powdered substance, as raced with driver, in order to indicate the tire tread contact patch under static conditions.
7. Body/Structure
a. Fenders and wheel openings shall remain unmodified. It is permitted to roll under or flatten any interior lip on the wheel opening for tire clearance. Non metallic inner fender liners may be removed.
b. Body repair shall be performed using every reasonable effort to maintain stock body contours, lips, etc. Any body repair modification having as its purpose increased clearance is prohibited.
c. The “R” package Miata chin spoiler is allowed on 1990-1997 cars provided it is mounted in the OEM location. 1999-up cars may use the OEM chin spoiler for these cars (99-00 p/n: NC10-V4-900F or 01-05 p/n: NO67-V4-900G). Rear spoilers including OEM design are prohibited.
d. Windshield Clips/Rear Window Straps per GCR Section 9.3.53. are permitted and recommended.
e. Convertible tops and attaching hardware shall be completely removed. Cars may compete with the Mazda factory detachable hard top in place (latches shall be replaced with positive fasteners), but it is not mandatory. When no top is used, driver shall wear arm restraints, and the cage will meet the helmet clearance rule.
f. Body side moldings, rocker panel moldings, and wheel opening trim pieces may be removed.
g. The plastic trim on the hood may be removed.
h. Hood and trunk clips are permitted. Stock hood and trunk latches may be disabled or removed.
i. Ducting may be added to provide fresh air to the driver compartment. This ducting shall be located in the driver and/or passenger vent window area by means of a transparent/alter-nate vent window material and duct with no modifications to the bodywork. To improve driver exit through the window area, the driver vent window and vent window supporting frame may be removed as a pair. If removed, ducting may be in the passenger side vent window only.
j. Radio antennas may be removed. Antennas for two-way radios may be added.
8. Driver/Passenger Compartment - Trunk
a. The driver’s seat shall be replaced with a one-piece bucket-type race seat. All seat mountings shall be reinforced. Factory seat tracks/brackets may be modified, reinforced, and/or removed to facilitate replacement mountings provided they perform no other function. The passenger seat must be removed.
b. Any steering wheel, except wood rimmed types, and its required mounting modifications may be used. Any shift knob may be used.
c. Gauges and instruments may be added, replaced, or removed. They may be installed in the original instrument(s) location using a mounting plate(s), or any other location using a secure method of attachment. Other than modifications make to mount instruments and provide for roll cage installation, the remainder of the dash “board” or panel shall remain intact.
d. Any interior or exterior mirrors may be used.
e. Carpets, center consoles, cargo bins, seat belts, floor mat, radio system, headliners, dome lights, grab handles, sun visors and their insulating and attaching materials may be removed. Other than to provide for the installation of required safety equipment or other authorized modifications, no other driver/ passenger compartment alterations or gutting are permitted.
f. Two way radios may be used.
g. Spare wheels and tires, jacks and tools shall be removed from the cargo/trunk area. Spare tire covers and trunk mats and/or trunk carpeting shall be removed.
h. Modifications may be made to the foot pedals to improve the comfort and accessibility to the driver. Dead pedal/foot rest and heel stop may be added.
i. If ballast is required to meet the required weight it shall be added as follows:
1.All ballast shall be securely mounted on the passenger floor.
2.Each segment of ballast shall be fastened with a minimum of two (2) one-half (1/2) inch bolts and positive lock nuts of SAE Grade 5 or better and shall utilize large diameter, load distributing washers.
3.Holes may be drilled in the passenger floorpan for the purposes of mounting the ballast and the floorpan may be reinforced for that purpose only.
j. All cars shall run with both front door windows fully open (down).
9. Safety
a. An electrical master (“kill”) switch is required. See GCR Section 9.3.33.
b. Installation of a fire extinguisher or fire system is required. See GCR 9.3.22.
c. Air bag systems shall be disarmed and may be removed.
d. In any automobile where allowed removal of upholstery, seat belts, etc., creates an opening between the driver/passenger compartment and an exposed gas tank, or part thereof, including the filler tube, a metal bulkhead which completely fills such opening shall be installed. See GCR 9.3.26
Spec Miata Specification Table
Bore x Stroke(mm) /Displ. (cc) Valves IN & EX (mm) Restrictor Size (mm) Comp.Ratio Wheelbase (mm) Gear Ratios Final Drive Brakes (mm) Weight(lbs)
Mazda 78.0 x 83.6 31.1 (I) N/A 9.4 2266 3.14, 1.89, 1.33, 4.3 (F) 235 Vented Disc 2285
MX-5 / Miata 1597 26.3 (E) 1.00, 0.81 (R) 232 Solid Disc
(90-93)
Mazda 83.0 x 85.0 33.1 (I) 45mm 9.0 2266 3.14, 1.89, 1.33, 4.1 (F) 255 Vented Disc 2385
MX-5 / Miata 1839 28.2 (E) 1.00, 0.81 (R) 252 Solid Disc
(94-95)
Mazda 83.0 x 85.0 33.1 (I) 45mm 9.0 2266 3.14, 1.89, 1.33, 4.1 (F) 255 Vented Disc 2385
MX-5 / Miata 1839 28.2 (E) 1.00, 0.81 (R) 252 Solid Disc
(96-97)
Mazda 83.0 x 85.0 33.1 (I) 41mm 9.5 2266 3.14, 1.89, 1.33, 4.3 (F) 255 Vented Disc 2450
MX-5 / Miata 1839 28.2 (E) 1.00, 0.81 (R) 252 Solid Disc
(99-00)
Mazda 83.0 x 85.0 33.1 (I) 43mm 10.0 2266 3.14, 1.89, 1.33, 4.3 (F) 255 Vented Disc 2450
MX-5 / Miata 1839 28.2 (E) 1.00, 0.81 (R) 252 Solid Disc
(01-05)
GCR - 505
|,|||-||MAZDA-MIATA-CALIPER-1994-2005|,||,|*SOLD OUT* Genuine Mazda Miata OEM Driver's Side Rear Caliper (1994-2005)|,|CI-mazda-miata-caliper-1994-2005|,|151.53|,|101.36|,||,||,||,||,||,||,|*CLEARANCE ITEM* Mazda Miata Left Caliper 1994-2005
Mazda OEM part number NAZ5-26-99ZR-T0 is a factory original Mazda Miata Base Driver Side Caliper. This is a genuine Mazda part, the manufacturer's recommended part for your vehicle.
The core charge will be refunded once the old caliper has been returned to us with a copy of the invoice. Returned caliper cores must be complete.
NOTE:
* This part only comes remanufactured by Mazda
|,|"Core Charge" "add(+$50)"|-||-|||-||CLEARANCE-KATZKIN-MIATA-LEATHER-UPHOLSTERY-DOOR-PANELS-ONLY-1990-1997|,||,|*SOLD OUT* Katzkin Miata Camel / Tan Leather Upholstery Door Panels Only - 1990-1997|,|clearance-katzkin-miata-leather-upholstery-door-panels-only-1990-1997|,|179.99|,|119.99|,||,||,||,||,||,||,|*CLEARANCE ITEM* Katzkin Miata Camel/Tan Leather Upholstery Door Panels Only - 1990-1997
*ONLY 1 Available at this Price, Final Sale
*Local Pick Up available in Irvine, CA
Whether you've already purchased our Katzkin seats or are planning on doing so, our new Katzkin door panels provide a beautiful finishing touch!
Available in all colors for the 1990-1997 ONLY, these door panels are a vinyl and leather combination for ease on installation. They are solid without any cut outs, so you simply do the cutting for your speakers and door handles yourself, or simply have an auto upholstery shop install them.
They are the upholstery only, not the fiberboard portion. These cover BELOW the black top portion of the door.
|,|"Select Color" "Camel"|-||-|||-||CI-CARCOVER|,||,|*SOLD OUT* Genuine Mazda Miata OEM ALL Weather Car Cover *BLUE* color 1999-2005|,|ci-carcover|,|249.99|,|99.99|,||,||,||,||,||,||,|Genuine Mazda Miata OEM ALL Weather Car Cover 1999-2005
This item is NEW CONDITION, but RETURNED item with minor palm-size oil stain. That is only reason this is 60% Discounted!
Genuine Mazda MX-5 Miata OEM Car Cover - All Weather StormProof Fabric
Protect your car from the elements and curious eyes with this car cover constructed of high-quality, weather-resistant fabric. The custom tailored cover features side mirror pockets. Car cover cable lock available separately. Cover must be pierced for mast-style antenna.
|,|||-||GENUINE-MAZDA-MIATA-OEM-HARD-TOP-DRIVER-SIDE-WEATHER-STRIPPING-1990-2005|,||,|*SOLD OUT* Genuine Mazda Miata OEM Hard-Top Driver Side Weather Stripping 1990-2005|,|CLEARANCE-OEM-NA01-R1-891B|,|80.82|,|59.99|,||,||,||,||,||,||,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hard-Top Driver Side Weather Stripping 1990-2005
|,|"Select Side" "Driver"|-||-|||-||CLEARANCE-MAZDA-MIATA-SILICONE-VACUUM-HOSES-SET-FOR-NB-1999-2005--12-PCS-|,||,|*SOLD OUT* Mazda Miata Black Silicone Vacuum Hoses Set for NB 1999-2005 (12 pcs)|,|clearance-mazda-miata-silicone-vacuum-hoses-set-for-nb-1999-2005--12-pcs-|,|199.99|,|129.99|,||,||,||,||,||,||,|*CLEARANCE ITEM* Mazda Miata Black Silicone Vacuum Hoses Set for NB 1999-2005 (12 pcs)
Specifications:
• Direct replacement for the standard hoses
• 4-ply polyester reinforced silicone
• Operating temperature range: -60°c to 235°c
• Pressure rating: 8bar max
• Highly resistant to oil & fuel spillages
• 1 year warranty
• All required clamps will be supplied (German style clamps undrilled with rolled edges)
|,|"Color" "Black"|-||-|||-||CI-MAMIJARAFOFI|,||,|*SOLD OUT* Mazda Miata Jackson Racing Foam Filter Cleaning Kit |,|ci-mamijarafofi|,|24.99|,|18.90|,||,||,||,||,||,||,|Keep your Miata MX-5 Foam Air Filter working properly. This kit is designed to clean and oil foam filters.
|,|||-||CI-2-403-071|,||,|*SOLD OUT* Custom Fit Miata Brushed Suede Dash Cover with Red *Miata* Embroidery 2006-2014|,|ci-2-403-071|,|69.99|,|35.99|,||,||,||,||,||,||,|Custom Fit Miata Brushed Suede Dash Cover - SALE!!!
The harsh summer sun is coming, but now its easy to protect your Miata's dash and have it look great at the same time!
Designed with CAD (Computer Aided Design) and manufacturing, these precision cut covers have superior workmanship for the best possible fit. The cover has openings for all your defroster vents and a special flap is built into the dash cover to allow proper deployment of the passenger airbag.
These dash covers are also made with special dyed fabrics that are guaranteed not to fade or shrink. Attach in less than 5 minutes with the included Velcro strips.
Protecting your Miata's dash has never been so easy and looked so good!
|,|||-||CI-403-071|,||,|*SOLD OUT* Custom Fit Miata Brushed Suede Dash Cover with Black 'Miata' Embroidery 1990-1997 |,|ci-403-071|,|69.99|,|35.99|,||,||,||,||,||,||,|Custom Fit Miata Brushed Suede Dash Cover - SALE!!!
The harsh summer sun is coming, but now its easy to protect your Miata's dash and have it look great at the same time!
Designed with CAD (Computer Aided Design) and manufacturing, these precision cut covers have superior workmanship for the best possible fit. The cover has openings for all your defroster vents and a special flap is built into the dash cover to allow proper deployment of the passenger airbag.
These dash covers are also made with special dyed fabrics that are guaranteed not to fade or shrink. Attach in less than 5 minutes with the included Velcro strips.
Protecting your Miata's dash has never been so easy and looked so good!
|,|||-||DRDRSIMA2|,||,|*SOLD OUT* Drag DR-16 Silver Machined|,|DRAG-DR-16-SM|,|112.99|,|99.95|,||,||,|5.000 |,||,||,||,|Drag DR-16 Silver Machined
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0"|-||-|"Select Width" "7.0"|-||-|"Select Bolt Pattern" "4-100.0mm"|-||-|"Select Offset" "40"|-||-|"Shipping Cost" "add(+$29.99)"|-||-|||-||CI-CENTER-BEZEL-NA|,||,|*SOLD OUT* Genuine Mazda Miata OEM Center Dash Faceplate 1994-1997|,|ci-center-bezel-na|,|125.00|,|74.99|,||,||,|0.000 |,||,||,||,|*Only 2 available at this price, open box, final sale
*Mazda Part# NA75-55-211-J58L
*Local Pick Up available in Irvine, CA
NOTE: There are scratches on the top and on the side.
If your current Miata center dash faceplate is cracked or damaged, this genuine OEM center dash faceplate will give your interior a new and fresh look. This part is often also referred to as a "radio bezel".
|,|||-||CI-OEM-NB-SPEED-FRONT-BUMPER|,||,|*SOLD OUT* Genuine OEM Mazda Front Bumper Cover 2004-2005 MAZDASPEED|,|ci-oem-nb-speed-front-bumper|,|405.11|,|305.00|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover 2004-2005 MAZDASPEED
*ONLY 1 Available at this Price, Final Sale
*Local Pick Up available in Irvine, CA
*Black Primer, Ready To Be Painted
|,|"Freight Cost" "Add (+$179)"|-||-|||-||GRIP---GO-STEERING-WHEEL-COVER|,||,|*SOLD OUT* Grip & Go Steering Wheel Cover & Seat Belt Cushions - Brushed Suede Memory Form|,|grip---go-steering-wheel-cover|,|19.85|,|12.99|,||,||,||,||,||,||,|Grip & Go Steering Wheel Cover & Seat Belt Cushions - Memory Form
Keeps hands cool in summer, warm in winter! This stretch-on steering wheel cover fits almost any steering wheel. Unique fabric accessories in brushed suede memory foam.
|,|"Select Color" "Charcoal"|-||-|||-||CLEARANCE-MAZDA-MIATA-SILICONE-HEATER-HOSES-FOR-1994-1997-NA8--9-PCS-INCLUDING-3-PCS-RADIATOR-HOSES-|,||,|*SOLD OUT* Mazda Miata Black Silicone Heater Hoses for 1994-1997 NA8 (9 pcs including 3 pcs Radiator Hoses)|,|clearance-mazda-miata-silicone-heater-hoses-for-1994-1997-na8--9-pcs-including-3-pcs-radiator-hoses-|,|219.99|,|139.99|,||,||,||,||,||,||,|*CLEARANCE ITEM* Mazda Miata Black Silicone Heater Hoses for 1994-1997 NA8 (9 pcs including 3 pcs Radiator Hoses)
Specifications:
• Direct replacement for the standard hoses
• 4-ply polyester reinforced silicone
• Operating temperature range: -60°c to 235°c
• Pressure rating: 8bar max
• Highly resistant to oil & fuel spillages
• 1 year warranty
• All required clamps will be supplied (German style clamps undrilled with rolled edges)
Heater Hoses Kit Contains the Following Hoses:
• (1) Upper Radiator Hose
• (1) Lower Radiator Hose to Pipe
• (1) Lower Hose From Pipe to Water Pump Inlet
• (1) By-Pass Hose
• (2) Heater Hoses
• (2) Throttle Body Hoses
• (1) Hose From Water Neck to Air Valve on Intake
|,|"Color" "Black"|-||-|||-||CI-MAZDAMIATABRA|,||,|*SOLD OUT* Mazda Miata Bra 1990-1997|,|ci-mazdamiatabra|,|152.95|,|84.99|,||,||,||,||,||,||,| Mazda Miata Bra "WITH OUT" Front Ait Dam (Black Lip Spoiler) 1990-1997
Custom-tailored to fit tight and look great, this heavy-duty vinyl cover with soft backing helps protect the front end from road debris. It's designed to allow the headlights to operate and hood to open without interference.
* NEW CONDITION, BUT RETURNED ITEM, THAT IS ONLY REASON ITEM IS 45% DISCOUNTED! *
|,|||-||CI-HARDTOP-REAR-SPOILER-FIBERGLASS|,||,|*SOLD OUT* Mazda Miata Hardtop Spoiler 1990-2005|,|ci-hardtop-rear-spoiler-fiberglass|,|280.00|,|160.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Hardtop Spoiler 1990-2005
*White Fiberglass
*Only 1 available at this price, open box, final sale
*Local Pick Up available in Irvine, CA
This hardtop spoiler enhances the aero of the Miata Hardtop. It gives the car more down force and finishes the lines of the hardtop in a beautiful way.
High grade 3M double side adhesive will be supplied with every piece for easy and reliable installation.
|,|||-||CISD-LUG-NUTS|,||,|*SOLD OUT* Mazda Miata Tuning Lug Nuts Set With Key 1990-2005|,|CIsd-lug-nuts|,|88.99|,|72.99|,||,||,||,||,||,||,|Mazda Miata Tuning Lug Nuts Set With Key 1990-2005
* 20 PIECES 12X1.5MM BLACK LUG NUTS WITH KEY
* MADE OF HIGH QUALITY ALUMINUM WITH BLACK ANODIZED FINISHED
* COMES WITH 0.7" SOCKET, EXTENDED 1.9" LENGTH
* 60 DEGREE TUNER STYLE SEATING FOR MOST AFTERMARKET WHEELS
* TORQUE SPECS ARE 70-80 FT/LBS
|,|"Color" "Black"|-||-|||-||CI-MIARPADFORIC|,||,|*SOLD OUT* Miata Armrest Pad for I.L. Center Console 1990-1997|,|ci-miarpadforic|,|72.99|,|53.95|,||,||,||,||,||,||,|Miata Armrest Pad for I.L. Center Console 1990-1997
The armrest should be mounted to our new Miata I.L. Motorsport Center Console NA (1990-1997).
The rubber assures a comfortable ride in your car. This soft inlay is specially designed for the center console.
|,|||-||CUFITMIDACO|,|NADASHBOARD|,|*CLEARANCE ITEM* Custom Fit Mazda Miata Dash Cover 1990-2017 - SALE!!|,|403-071|,|69.99|,|50.45|,||,||,|0.000 |,||,|www.gomiata.com|,||,|Custom Fit Miata Brushed Suede Dash Cover - SALE!!!
*We have the most Color and Fabric Selection*
The harsh summer sun is coming, but now its easy to protect your Miata's dash and have it look great at the same time!
Designed with CAD (Computer Aided Design) and manufacturing, these precision cut covers have superior workmanship for the best possible fit. The cover has openings for all your defroster vents and a special flap is built into the dash cover to allow proper deployment of the passenger airbag.
These dash covers are also made with special dyed fabrics that are guaranteed not to fade or shrink. Attach in less than 5 minutes with the included Velcro strips.
Protecting your Miata's dash has never been so easy and looked so good!
|,|"Select Year" "Select Here" "1990-1993" "1994-1997" "1999-2005" "2006-2015" "2016-2023 add(+$5)" "|-||-|"Dash Cover Febric and Color" "Select Here" "Poly Carpet - Black" "Poly Carpet - Cinder" "Poly Carpet - Dark Blue" "Poly Carpet - Dark Brown" "Poly Carpet - Gray" "Poly Carpet - Maroon" "Poly Carpet - Mocha" "Poly Carpet - Vanilla" "Poly Carpet - Charcoal" " " "Plush Velour - Black add(+6)" "Plush Velour - Dark Blue add(+6)" "Plush Velour - Gray add(+6)" "Plush Velour - Maroon add(+6)" "Plush Velour - Medium Gray add(+6)" "Plush Velour - Oak add(+6)" "Plush Velour - Red add(+6)" "Plush Velour - Taupe add(+6)" "Plush Velour - Charcoal add(+6)" "Plush Velour - Dark Brown add(+6)" "Plush Velour - Light Taupe add(+6)" "Plush Velour - Medium Blue add(+6)" "Plush Velour - Mocha add(+6)" "Plush Velour - Ocean Blue add(+6)" "Plush Velour - Saddle add(+6)" "Plush Velour - Vanilla add(+6)" " " "Brushed Suede - Black add(+$8)" "Brushed Suede - Charcoal add(+$8)" "Brushed Suede - Gray add(+$8)" "Brushed Suede - Mocha add(+$8)" "Brushed Suede - Oak add(+$8)" "Brushed Suede - Taupe add(+$8)" " " "Sedona Suede - Black add(+$15)" "Sedona Suede - Charcoal add(+$15)" "Sedona Suede - Gray add(+$15)" "Sedona Suede - Mocha add(+$15)" "Sedona Suede - Oak add(+$15)" "Sedona Suede - Taupe add(+$15)" " " "DashTex - Black add(+$12)" "DashTex - Charcoal add(+$12)" "DashTex - Gray add(+$12)" "DashTex - Oak add(+$12)" " " "Popular Prints - Camo Game add(+$15)"|-||-|"Would you like embroidery" "Select Here" "Yes add(+$18)"|-||-|"Embroidery Style" "Select Here" "Block Style" "Script Style"|-||-|"Characters on Embroidery" "Select Here" "Miata" "MX-5" "Roadster"|-||-|"Embroidery Character Color" "Select Here" "Baby Blue" "Beige" "Black" "Brown" "Burgandy" "Charcol" "Dark Blue" "Dark Brown" "Dark Green" "Dark Rust" "Forest Green" "Gold" "Kelly Green" "Light Blue" "Light Charcol" "Light Ocean Blue" "Light Orange" "Light Taupe" "Maroon" "Ocean Blue" "Olive Green" "Orange" "Pink" "Purple" "Red" "Rosewood" "Royal Blue" "Rust" "Saddle" "Silver" "Tan" "Taupe" "Teal" "White" "Yellow"|-||-|||-||ALI-ENGINE-OIL-CAP|,|19MAMIENPEOI1|,|*CLEARANCE ITEM* Mazda Miata MX-5 ENGINE Oil Cap 1990-2005|,|ali-engine-oil-cap|,|58.55|,|39.02|,||,||,||,||,||,||,|Mazda Miata MX-5 ENGINE Oil Cap 1990-2005
|,|"Select Color" " Select Here" "Red" "Blue" "Silver"|-||-|||-||NRGINSHHUB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata NRG Innovations Short Hub 1990-2010|,|NRG-SRK-160H|,|149.99|,|129.95|,||,||,|0.000 |,||,||,||,|NRG Innovation has developed another complement to our quick release steering kits. These units were designed specially so that an aftermarket steering wheel installed with the quick release kit still mounts in the same location, not too close to the driver. Made from the highest quality aluminum. This product is designed utilizing one piece solid construction for the maxim in durability and usability.
*Mostly used with Quick Releases
*Could Interfere With Turn Signals for the Miata
|,|||-||MAZDA-MIATA-HEATER-HOSES-FOR-1990-1993-NA6-9-PCS-INCLUDING-3-PCS-RADIATOR-HOSES|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Silicone Cooling Hoses for 1990-1993 NA6 (9 pcs) - Sale! |,|mazda-miata-heater-hoses-for-1990-1993|,|159.99|,|129.45|,||,||,|0.000 |,||,||,||,|Mazda Miata Silicone Cooling Hoses for 1990-1993 NA6 (9 pcs)
Specifications:
Direct replacement for the standard hoses
4-ply polyester reinforced silicone
Operating temperature range: -60°c to 235°c
Pressure rating: 8bar max
Highly resistant to oil & fuel spillages
Heater Hoses Kit Contains the Following Hoses:
(1) Upper Radiator Hose
(1) Lower Radiator Hose to Pipe
(1) Lower Hose From Pipe to Water Pump Inlet
(1) By-Pass Hose
(2) Heater Hoses
(2) Throttle Body Hoses
(1) Hose From Water Neck to Air Valve on Intake
NOTE: Color Hose Pictures on this page are to show examples of the color of the hoses, they may or may not be the kit you are ordering. See "Heater Hoses Kit Contains" above to specify what you are ordering.
Approximate lead time is 20-30 days
|,|"Select Color" "Select Here" "Red" "Blue" "Black"|-||-|||-||MAZDA-MIATA-HEATER-HOSES-FOR-19941997-NA8-9-PCS-INCLUDING-3-PCS-RADIATOR-HOSES|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Silicone Cooling Hoses for 1994-1997 NA8 (9 pcs) - Sale! |,|mazda-miata-heater-hoses-for-1994-1997|,|159.99|,|129.45|,||,||,|0.000 |,||,||,||,|Mazda Miata Silicone Cooling Hoses for 1994-1997 NA8 (9 pcs)
Specifications:
* Direct replacement for the standard hoses
* 4-ply polyester reinforced silicone
* Operating temperature range: -60½c to 235½c
* Pressure rating: 8bar max
* Highly resistant to oil & fuel spillages
* 1 year warranty
Heater Hoses Kit Contains the Following Hoses:
* (1) Upper Radiator Hose
* (1) Lower Radiator Hose to Pipe
* (1) Lower Hose From Pipe to Water Pump Inlet
* (1) By-Pass Hose
* (2) Heater Hoses
* (2) Throttle Body Hoses
* (1) Hose From Water Neck to Air Valve on Intake
NOTE: Color Hose Pictures on this page are to show examples of the color of the hoses, they may or may not be the kit you are ordering. See "Heater Hoses Kit Contains" above to specify what you are ordering.
Approximate lead time is 20-30 days
|,|"Select Color" "Select Here" "Blue" "Red" "Black"|-||-|||-||MAZDA-MIATA-VACUUM-HOSES-SET-FOR-NA-1990-1997-12-PCS|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Silicone Vacuum Hoses Set for NA 1990-1993 (12 pcs) - Sale! |,|mazda-miata-vacuum-hoses-1990-1997|,|189.99|,|122.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Silicone Vacuum Hoses Set for NA 1990-1997 (12 pcs)
Specifications:
Direct replacement for the standard hoses
4-ply polyester reinforced silicone
Operating temperature range: -60°c to 235°c
Pressure rating: 8bar max
Highly resistant to oil & fuel spillages
All required clamps will not be supplied
Approximate lead time is 10-21 days
|,|"Select Color" "Select Here" "Red" "Black" "Blue"|-||-|||-||MAZDA-MIATA-VACUUM-HOSES-1994-1997|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Silicone Vacuum Hoses Set for NA 1994-1997 (13 pcs) - Sale! |,|ALI-9497|,|145.55|,|129.98|,||,||,||,||,||,||,|Mazda Miata Silicone Vacuum Hoses Set for NA 1994-1997 (13 pcs)
Mazda Miata Silicone Vacuum Hoses Set for NA 1990-1997 (12 pcs)
Specifications:
Direct replacement for the standard hoses
4-ply polyester reinforced silicone
Operating temperature range: -60°c to 235°c
Pressure rating: 8bar max
Highly resistant to oil & fuel spillages
All required clamps will not be supplied
Approximate lead time is 20-30 days
|,|"Select Color" "Select Here" "Black" "Red" "Blue" "|-||-|||-||NRGINQULOHUB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* NRG Innovations Quick Lock Hub|,|NRG-SRK-101LB|,|149.99|,|129.05|,||,||,|0.000 |,||,||,||,| Click Picture to see All Products
NRG Innovations has developed the Next Generation in anti-theft security for vehicles with aftermarket quick release systems. A perfect compliment to its Quick Release Systems, these units are meant to quickly and easily disable the use if the steering hub by not allowing the placement of a steering wheels into the hub. No more worries of someone simply replacing your steering wheel with their own to drive away with your vehicle. You can now even leave your steering wheel in the car instead of carrying it around. Made from solid steel and utilizing the Ball-Lock design and key mechanism, this product will deter any would-be thief from stealing your ride.
|,|"Select Finish" "Select Here" "Matte Black" "Silver Finish add(+$10)" "Black add(+$10)" "Blue add(+$10)" " " "Chrome Gold add(+$10)" "Gun Metal" "Neo Chrome add(+$10)" "New Blue add(+$10)" " " "Orange add(+$20)" "Purple add(+$10)" "Red add(+$15)" "Silver add(+$10)"|-||-|||-||NRGINQUREKIT1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* NRG Innovations Quick Release Kit Gen 2.0 - Sale! |,|NRG-SRK|,|139.99|,|119.98|,||,||,|0.000 |,||,||,||,|The NRG Innovations has developed the Next Racing Generation in quick release. These new units feature many options that conventional Ball-Lock quick release systems do not offer including specially designed raised sections to prevent the hub from stretches, a self locking mechanism for ease of use and safety functions, and as always, a variety of different colors and color combinations.
Click Picture to see All Products
Made from highest quality aircraft aluminum or powder-coated stainless steel for maximum durability, these units are meant to last, remain stylish, as well as have functional usage
|,|"Select Color" "Select Here" "Black/Titanium (SRK-200-1BK)" "Silver/Titanium (SRK-200-1SL)" "Black (SRK-200BK)" "Black/Chrome Gold (SRK-200BK-CG) add(+$15)" "Black/NeoChrome (SRK-200BK-MC) add(+$15)" " " "Silver (SRK-209SL) add(+$15)" "Blue (SRK-200BL)" "Carbon Fiber (SRK-200CF) add(+$15)"
"Gun Metal/Titanium (SRK-200GM)" " " "Green (SRK-200GN) add(+$15)" "New Blue/Titanium (SRK-200NB) add(+$15)" "Orange (SRK-200OR) add(+$15)" "Pink (SRK-200PK) add(+$15)" "Purple (SRK-200PP) add(+$15)" " " "Red (SRK-200R) add(+$15)" "Orange (SRK-200RG) add(+$15)" "Silver Shinny/Brushed Silver (SRK-200SSL) add(+$15)"|-||-|||-||NRGINQUTISY|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* NRG Innovations Steering Wheel Quick Tilt System|,|NRG-SRT-100BK|,|289.99|,|249.98|,||,||,|0.000 |,||,||,||,|Tuners can now have a little more peace of mind with the Steering Wheel Quick Tilt w/ Lock by NRG Innovations. Voted one of the 'Top 10 Best New Interior Accessories' of SEMA 2008, the Steering Wheel Quick Tilt w/ Lock allows the steering wheel to tilt up and out of the way in one quick motion allowing for way vehicle entry and exit.
The unit also features a patent locking system that secures the vehicle with the tilt engaged.
*Only fits 6 bolt hubs.
|,|"Select Finish" "Black" "Silver add(+$10)"|-||-|||-||NRGINTHVEQUR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* NRG Innovations Thin Version Quick Release Kit|,|NRG-SRK-400BL|,|149.99|,|114.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Thin Version Quick Release Kit
A totally redesigned version of our quick release systems, this quick release kit utilizes a pin and gear locking mechanism for maximum durability, no play, and all the while reducing required space. In fact, this reduces the height of our quick release systems by over half from a 3 inches height to a mere 1.25 inches.
Perfect for those individuals who feel the need to put their steering wheels further from their bodies, or for those who have the necessity to use a crush-type hub.
Used with MOMO and Sparco Hubs
|,|"Select Color" "Select Here" " " "Black" "Purple add(+$5)" "Chrome Gold add(+$5)" "Red add(+$5)" "Silver add(+$5)" "Blue add(+$5)" "Orange add(+$5)" "Carbon Fiber add(+$10)" "Neo Chrome add(+$15)"|-||-|||-||CL-RLG-SHIFTBOOT0610|,||,|*CLEARANCE ITEM* Mazda Miata Custom Shift Boot & Door Pull Combo 2006-2010 - Sale! |,|cl-rlg-shiftboot0610|,|115.00|,|94.95|,||,||,||,||,||,||,|Mazda Miata Custom Shift Boot & Door Pull Combo by RedLineGoods 2006-2010
Leather Color: BLACK
Stitching color: TAN
|,|||-||MIATAFLOORMATS|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda Miata Ultra Plush Floor Mats 1990-2024|,|403-010|,|129.99|,|79.55|,||,||,|0.000 |,||,|dfagaga|,||,|
Our Miata floormats will definitely help make your Miata's interior look like new again!
Spruce your interior with a set of new ultra-plush 24 oz. Miata floor mats. Made of the highest quality nylon carpeting, these floor mats include nibbed backing so they are sure to stay in place.
These Miata floor mats may cost a little bit more, but the quality is well worth the price! Your Miata will thank you!
Price is for the pair.
|,|"Year" "Please Select Year" "1990-1997"
"1999-2005" "2006-2015" "2016-2024"|-||-|"Color" "Please Select Color" "Black" "Biscuit" "Caramel" "Silver" "Charcoal" "Saddle" "Mocha" "Burgundy"|-||-|||-||MAMXMICUDOAR2|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom Door Armrest Leather Upholstery Covers 1990-1997 - Sale! |,|RLG-DOORARMCOVER9097|,|129.99|,|109.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Custom Door Armrest Leather Upholstery Cover
The perfect way to further customize your Miata's interior. Hide the ugly, aged plastic under an elegant leather cover with stitching to match your shift boots, center console and padded door armrests.
94-97 Miatas. Please make sure your car has this design before you order!
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995,
1996 and 1997
Includes both Driver and Passenger sides
|,|"Select Primary Leather Color" "None" "Black" "Black perforated" "Black faux-alcantara" "Black carbon-fiber" "Charcoal" "Charcoal carbon-fiber" "Medium gray" "Light gray" "Silver carbon-fiber" "Dove faux-alcantara" "Cream" "Tan" "Sierra" "Beige" "Beige faux-alcantara" "Taupe" "Dark Green" "Red" "Red perforated" "Red faux-alcantara" "Red carbon-fiber" "Pink" "Burgundy" "Medium blue" "Blue faux-alcantara" "Blue carbon-fiber" "Violety blue" "Dark blue" "White" "Light yellow" "Yellow carbon-fiber" "Orange carbon-fiber" "Other"|-||-|"Select Stitching color" "Matching chosen leather" "Contrasting (two-tone boots)" "Black" "Red (JDM)" "Pink" "Charcoal" "Medium gray" "Light gray" "Silver" "Light blue" "Medium blue" "Dark blue" "White" "Yellow" "Tan" "Beige" "Sierra" "Brown" "Burgundy" "Orange" "Light green" "Dark green" "Other"|-||-|"Select Special Finishing Type" "None" "Stripes of leather add(+$9.00)" "Piping add(+$12.00)"|-||-|"Select Finishing Color" "None" "Black" "Black perforated" "Black faux-alcantara" "Black carbon-fiber" "Charcoal" "Charcoal carbon-fiber" "Medium gray" "Light gray" "Silver carbon-fiber" "Dove faux-alcantara" "Cream" "Tan" "Sierra" "Beige" "Beige faux-alcantara" "Taupe" "Dark Green" "Red" "Red perforated" "Red faux-alcantara" "Red carbon-fiber" "Pink" "Burgundy" "Medium blue" "Blue faux-alcantara" "Blue carbon-fiber" "Violety blue" "Dark blue" "White" "Light yellow" "Yellow carbon-fiber" "Orange carbon-fiber" "Other"|-||-|"Select Extra Padded Armrest" "No thanks" "Yes, Please 6/8 inch add(+$25)" "Yes, Please 1 1/8 inch add(+$35)"|-||-|||-||MIBEPEBAR19|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Miata BeatRush Rear P.P.F. Performance Bar 1994-1997|,|BR-S85081-PPF|,|229.99|,|198.05|,||,||,|0.000 |,||,||,||,|Miata BeatRush Rear P.P.F. Performance Bar
Detailed Description:
Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush P.P.F. Performance Bar restrains suspension links and other installation points to enhance rigidity, which make the suspension movement smooth and enhances steering response as well as traction.
Chassis rigidity is improve rapidly. Prevents chassis distortion due to heavy competition. Suspension feeling is improve and sharper turnings are acquired.
For Mazda Miata Years: 1994, 1995, 1996, and 1997
NOTE: 1990-1993 Miata's REQUIRES WELDING AWR TAB KIT ONTO SUBFRAME. ITEM #: AWR-5999
Add Additional Accessories Awr-5999 for 1990-1993 Miata's
|,|||-||RLG-DASHPAD9093|,||,|*CLEARANCE ITEM* Miata Custom FRONT Dash Pad BLACK Leather Upholstery Covers by RedLineGoods 1990-1993|,|rlg-dashpad9093|,|119.99|,|89.90|,||,||,||,||,||,||,|Miata Custom FRONT Dash Pad Leather Upholstery Covers by RedLineGoods 1990-1993
* BLACK WITH BLACK STITCHING
* BLACK WITH TAN STITCHING AVAILABLE!!!*
Mazda MX-5 Miata Custom FRONT Dash Pad Leather Upholstery Covers by RedLineGoods 1990-1993
The perfect way to further customize your Miata's interior. Hide the ugly, aged plastic under an elegant leather cover with stitching to match your shift boots, center console and padded door armrests.The perfect way to further customize your Miata's interior. Hide the ugly, aged plastic under an elegant leather cover with stitching to match your shift boots, center console and padded door armrests.
TWO (2) pieces, the long one from the wheel to the other door and the short one from the gauge cluster to the driver door
|,|||-||MAMXMICUWISI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|*CLEARANCE ITEM* Miata Custom Window Sill Leather Upholstery Covers 1990-1997|,|RLD-WINDOWSILL9097|,|189.99|,|149.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Custom Window Sill Leather Upholstery Covers 1990-1997
The perfect way to further customize your Miata's interior. Hide the ugly, aged plastic under an elegant leather cover with stitching to match your shift boots, center console and padded door armrests.The perfect way to further customize your Miata's interior. Hide the ugly, aged plastic under an elegant leather cover with stitching to match your shift boots, center console and padded door armrests.
TWO (2) pieces, upper part of the door trim
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996 and 1997
|,|"Select Primary Leather Color" "None" "Black" "Black perforated" "Black faux-alcantara" "Black carbon-fiber" "Charcoal" "Charcoal carbon-fiber" "Medium gray" "Light gray" "Silver carbon-fiber" "Dove faux-alcantara" "Cream" "Tan" "Sierra" "Beige" "Beige faux-alcantara" "Taupe" "Dark Green" "Red" "Red perforated" "Red faux-alcantara" "Red carbon-fiber" "Pink" "Burgundy" "Medium blue" "Blue faux-alcantara" "Blue carbon-fiber" "Violety blue" "Dark blue" "White" "Light yellow" "Yellow carbon-fiber" "Orange carbon-fiber" "Other"|-||-|"Select Stitching color" "Matching chosen leather" "Contrasting (two-tone boots)" "Black" "Red (JDM)" "Pink" "Charcoal" "Medium gray" "Light gray" "Silver" "Light blue" "Medium blue" "Dark blue" "White" "Yellow" "Tan" "Beige" "Sierra" "Brown" "Burgundy" "Orange" "Light green" "Dark green" "Other"|-||-|||-||MAZDA-BAT-BADGE|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Cool Metal Bat Emblem|,|mazda-bat-badge|,|26.99|,|18.02|,||,||,||,||,||,||,|Mazda Miata Cool Metal Bat Emblem
Item Size: 4 inch x 3 inch
-Perfect for car decoration, improve the appearance of your vehicle.
-Easy to install, suitable for exterior or interior use.
-Come with adhensive tape, just peel and stick.
|,|"Select Color" "Select Here" "Black" "Red" "Silver"|-||-|||-||MAMICOCA|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Custom Carpet Complete Set - Sale! |,|ACC-100|,|699.99|,|395.02|,||,||,|5.000 |,||,||,||,|Go Miata is proud to offer the highest quality custom fit Mazda Miata carpet available. Our replacement Mazda Miata carpet kits are made from OEM Quality materials and are custom made using the original Mazda Miata floor pan, providing the best quality and fit. For those items that are molded, the mildew resistant jute padding is heat bonded to the backside of the new carpet kit and a heel pad is welded to the correct location on the driver's side.
This set includes passenger areas, curtain, shelf, and donut.
• Made in USA, with Top Quality materials.
• Heat and pressure molded to the original floor pan, just like OEM Carpet
• Mildew resistant jute padding is heat bonded to the backside
• Heel pad is welded to the correct location
• Mazda Miata Carpet is Guaranteed against Defects
• Will fit the following years: 1990-1997 and 2006-2008
Mazda Miata carpet is manufactured with two different types of backing:
Standard Poly Backing: This backing is a thin plastic coating on the back of the carpet. Usually is clear in appearance. It is less than 1/16th inch thick and very flexible. Most auto makers prior to 1999 used this type of backing. Jute insulation is pre attached with this backing choice.
Mass Rubber Upgrade Backing: This is a dense rubber mat that is attached to the back of the carpet. Actually molded with the carpet. You can identify this on your existing carpet by inspecting for a 1/8" thick black rubber on the backside of your carpet. Many late model vehicles have this backing as standard equipment from factory. It is used to replace the old type sound barrier/heat insulation for sound deadening and heat shielding. This backing also provides a water proof barrier between carpet and the floor pan resulting in less rust out problems. This product will more than double the weight of the standard carpet with standard backing. Adding this backing to your carpet will make the carpet more like a shell, holding its shape better than the standard more flexible backing resulting in a better fit and look. Please note that carpets with mass backing will also include the standard felt padding. This backing can be added as an upgrade to most of our molded carpets.
* Great sound and heat barrier.
* Increases the overall look of the carpet after installation.
* Approximately 45 mil thick EVA material.
* Call Customer Service for Special Colors or Anniversary Colors *
*Image does not represent this exactly automobile*
|,|"Select Year" "None Specified" "1990-1993" "1994-1997" "2006-2008"|-||-|"Standard Cut Pile Carpet" "Select Here" "Caramel - Recommended for 1990-1997"
"Black" "Graphite" "Dark Gray" "Med Opal" "Med Gray/Pewter" "Steel Blue" "Med Beige" "Sandalwood" "Med Mocha" "Claret/Oxblood" "Blue" "Brown" "Red" "Saddle" "Charcoal" "Taupe" "Royal Purple"
"Limelite Green" "Gray" "Dark Green" "Jade Green" "Chamoise" "Ocean Blue/Bright Blue" "Dark Blue" "Medium Gray / Pewter" "Ruby Red" "Torch Red"|-||-|"Super Plush Upgrade Essex Option" "Select Here" "Black add(+$185)" "Agate add(+$185)" "Charcoal add(+$185)" "Dark Taupe add(+$185)" "Midnight Blue add(+$185)" "Lapis Blue add(+$185)" "Maroon add(+$185)" "Red add(+$185)" "Dark Brown add(+$185)" "Caramel add(+$185)" "Beige add(+$185)" "Medium Gray add(+$185)" "Gray add(+$185)" "Silver add(+$185)" "Indigo add(+$185)" "Cream add(+$185)"|-||-|"Mass Rubber Backing Upgrade Option" "No Thanks" "Yes, Mass Rubber add(+$199)"|-||-|"Custom Fit Matching Carpet Floor Mats" "No Thanks" "2 Piece Front Standard add (+$125)" "2 Piece Super Plush add (+$185)"|-||-|"Shipping & Handling" "add(+$105)"|-||-|||-||SEAT-GAP-APERTURE-PAD-LEAK-PROOF-STOPPER|,|NEW|,|*CLEARANCE ITEM* Mazda Miata Seat Gap Aperture Pad Leak Proof Stopper |,|Seat-Gap-Stop|,|45.55|,|28.95|,||,||,||,||,||,||,|Mazda Miata Seat Gap Aperture Pad Leak Proof Stopper
Material: Super microfiber leather material, smooth and soft
Color: Brown, Beige, Black,
This product uses the advanced super - fiber skin material car gap sleeve, avoid small things fall under the seat
Price for pair
|,|"Select Color" "Select Here" "Black" "Brown" "Beige" "Black with Phone Holder add(+$20)" "Brown with Phone Holder add(+$20)" "Beige with Phone Holder add(+$20)"|-||-|||-||MAZDA-MX-5-MIATA-BILLET-HOOD-PINS|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata Billet Hood Pins|,|057-286|,|109.99|,|99.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Billet Hood Pins
This is more than a set, it’s a system. Extensive engineering has gone into making our hood pins function as well as they look. The 6061 T6 billet aluminum plates are precision-machined then brushed before being clear anodized.
Specially designed Delrin bushings secure the stainless steel lynch pins to the plates and prevents scratching and wear. Vinyl covered stainless steel lanyards keep track of the lynch pins when the hood is open. The adjustable hood pins and retaining nuts are highly polished stainless steel to catch the eye and provide years of service.
Special mounting brackets are also included. Permanent modifications to the hood and radiator cover panel are required.
Finish: Brushed
Material: Billet Aluminum
|,|||-||NRG-CLASSIC-WHITE-NEO-GLOW|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* NRG Classic Wood Grain Steering Wheel Neochrome - Black Spokes|,|ST-015BK-XX|,|189.99|,|149.98|,||,||,|0.000 |,||,||,||,|NRG Classic White Wood Grain Steering Wheel Neochrome GLOW - Black Spokes
-350mm
Made from high quality materials with a sophisticated design to let you feel the smooth white colored luxurious wood and the aggressive 3 spoke center neochrome finish. A great addition to any car for added style and look.
|,|"Select Color" "Select Here" "Blue" "Purple"|-||-|||-||AEMSHORRAMIN|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* AEM Mazda Miata Performance Intake System 2000-2003|,|aem-22-482|,|519.99|,|345.99|,||,||,|0.000 |,||,|sdgfadsg|,||,|AEM Mazda Miata Performance Intake System 2000-2003
One of the best ways to increase the performance of your 2000-2003 Miata is to allow the engine to breathe more freely. The stock Miata airbox is very restricitive by its design. In order for the engine to reach more of its potential, it needs a less resrictive intake design.
The AEM intake achieves this. Not only will this intake give your Miata much freer breathing and quicker acceleration, but also provide a nice deep growl at high revs. Not at all loud, but a nice sporty sound.
AEM's Short Ram induction systems create more power, approximately 10 HP, and more torque for your Miata...you will FEEL the difference.
CARB 50-State approved. Comes complete with reusable foam cone filter, all hardware, and detailed instructions.
Available in blue, red, and polished.
Manufactured and assembled in the USA.
NOTE: Not compatible with Mazdaspeed
For Mazda Miata Years: 2000, 2001, 2002, and 2003
|,|"Select Finish" "Select Here" "Polished" "Blue" "Red"|-||-|||-||BADBOYAIRHORN|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|*CLEARANCE ITEM* BAD BOY Air Horn|,|BBH-419|,|49.99|,|39.95|,||,||,|0.000 |,||,||,||,| 
Have you had some close accidents because other drivers didn't see your Miata? Sometimes we have to assert ourselves on the road to let other drivers know we're there. The BAD BOY Air Horn is great to let other know where we are.
The BAD BOY Air Horn is the latest in air horn technology, one-piece design, that requires no hoses. Installs in minutes by simply transferring the factory horn wires to the compressor. Mounts with one bolt included in kit.
Produces a powerful dual tone air horn sound that is two times 2X louder than the factory horn. The BAD BOY Air Horn is compact in size to fit the Mazda Miata and any 12-volt vehicle that wants a loud air horn sound. Heavy-duty maintenance free compressor will provide years of dependable service. Instruction are included.
BAD BOY Air Horn - Features:
* 2X Louder Than Factory Horn
* Compact One-Piece Design
* No Hose Required
* Installs In Minutes Without Special Tools - Connects to factory horn wiring.
* Built in heavy-duty compressor is maintenance free for years of dependable service
BAD BOY Air Horn - Specifications:
* Size: 2-1/2" W x 4-1/2" L x 4-1/2" H
* Loudness: 118 Decibels - 530/680 Hz
|,|||-||BADBOYCHAIRH|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|*CLEARANCE ITEM* BAD BOY CHROME Air Horn|,|BBH-519|,|69.99|,|54.95|,||,||,|0.000 |,||,||,||,|
Have you had some close accidents because other drivers didn't see your Miata? Sometimes we have to assert ourselves on the road to let other drivers know we're there. The BAD BOY CHROME Air Horn is great to let other know where we are.
BAD BOY CHROME ™ has all the same features, as the original BAD BOY ™ with bright chrome plated finish is a step-up letting the vehicle stand out in chrome. The diagrams have a new shaped chrome cover and Wolo has added a chrome cover to the top of the compressor. Both covers are aerodynamically shape making the BAD BOY CHROME™ a great choice to dress-up your Mazda Miata engine compartment as well as the exterior mount on a motorcycle.
The BAD BOY CHROME Air Horn is the latest in air horn technology, one-piece design, that requires no hoses. Installs in minutes by simply transferring the factory horn wires to the compressor. Mounts with one bolt included in kit. Produces a powerful dual tone air horn sound that is two times 2X louder than the factory horn. The BAD BOY CHROME Air Horn is compact in size to fit the Mazda Miata and any 12-volt vehicle that wants a loud air horn sound. Heavy-duty maintenance free compressor will provide years of dependable service. Instruction are included.
|,|||-||CI-BRAILLE-BATTERY-B2015|,||,|*CLEARANCE ITEM* Braille B2015 No-Weight Race & Street Battery 15 lbs|,|ci-braille-battery-b2015|,|209.99|,|189.99|,||,||,|0.000 |,||,||,||,|*Only 1 available at this price, final sale
*Manufacture date 4/14/14
*Local Pick Up available in Irvine, CA
Just Right
At under 15 pounds, the B2015 is out most popular non-carbon racing battery. It is able to start larger engines easily for racing and offers daily driving capability for 4 cylinder motors with ease. With 1067 pulse cranking amps this has enough power to start more than any other battery in its weight class.
No Spill, No Corrosion, No Maintenance
Technically registered as a "sealed valve regulated" design, this patented technology completely eliminates acid spills and corrosion on terminals. This design is environmentally safe does not need filling and maintenance. Air shipping approved.
Exclusive Dual Terminal Design
A Braille Battery exclusive! This feature allows the battery to be mounted in a variety of positions. It is designed to accept racing, powersports and automotive terminals vertically and horizontally.
Stainless Steel Terminals
Stop loose battery connections with our robust stainless steel threads. These heli-coil design threads allow higher bolt torque and help keep your battery connected even in high vibration environments.
Exclusive Brass Auto Terminals
Included with every Braille Auto Battery are patent pending high quality brass SAE terminals. Designed to distribute the electrical load into and out of the battery. Designed for high amperage, high stress use of racing and audio competitions.
Green from Start to Finish
We employ a manufacturing process with the highest concern for the environment and quality. Recycled lead, plastic and stainless steel ensure we'll have a future to race towards.
Solid Top Lead Connectors
Shaken, not stirred - From 6 "G" NHRA drag launches, to 4 G cornering loads in Indy this design holds the internals firmly in place.
Performance Certified - Fully Charged
Every Braille Battery is individually tested and certified before shipping, eliminating DOA batteries. Fully charged and ready to install at time of shipping.
|,|||-||CARCOCALO|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Car Cover Cable & Lock|,|808-249|,|22.95|,|15.95|,||,||,|0.000 |,||,|fgagh|,||,|For use with all brands of covers. A bit of extra security from theft and high winds. Fits through the eye-loops of your car covers, easy to use. Kit comes with 8-foot vinyl coated steel cable, 1 padlock with brass housing & 2 keys.
|,|||-||CI-1-403-071|,||,|*CLEARANCE ITEM* Custom Fit Miata Brushed Suede Dash Cover Grey-Silver Color 1999-2005|,|ci-1-403-071|,|69.99|,|35.99|,||,||,||,||,||,||,|Custom Fit Miata Brushed Suede Dash Cover - SALE!!!
The harsh summer sun is coming, but now its easy to protect your Miata's dash and have it look great at the same time!
Designed with CAD (Computer Aided Design) and manufacturing, these precision cut covers have superior workmanship for the best possible fit. The cover has openings for all your defroster vents and a special flap is built into the dash cover to allow proper deployment of the passenger airbag.
These dash covers are also made with special dyed fabrics that are guaranteed not to fade or shrink. Attach in less than 5 minutes with the included Velcro strips.
Protecting your Miata's dash has never been so easy and looked so good!
|,|||-||CI-DUNLOP-DIREZZA-DZ101|,||,|*CLEARANCE ITEM* Dunlop Direzza DZ101 195/50/15|,|ci-dunlop-direzza-dz101|,|360.00|,|299.99|,||,||,|0.000 |,||,||,||,|Dunlop Direzza DZ101 195/50/15
*PRICED FOR FULL SET
*Only 1 set available at this price, final sale
*Please call customer service if you would like to order 2 tires at 619-466-4282
*Local Pick Up available in Irvine, CA
The Direzza DZ101 is Dunlop's Ultra High Performance Summer tire for the drivers of sport compact cars. The Direzza DZ101 shares the Direzza name with Dunlop racing tires used in the Japanese SUPER GT Championship and was developed to provide crisp and responsive handling. The Direzza DZ101 is not intended to be driven in near-freezing temperatures, through snow or on ice.
The Direzza DZ101 features Dunlop's specially formulated Silicarbon Matrix tread compound (combines silica and carbon black) to enhance grip. The compound is molded into a directional tread design featuring rigid shoulder blocks and two wide, straight tread channels with long, oblique grooves to combine responsive handling, stable cornering and hydroplaning resistance. The tire's internal structure includes twin steel belts reinforced by Dunlop's Jointless Band (JLB) spirally wound nylon cord cap ply to stabilize the tread area enhancing tread wear, handling and high-speed capability. A polyester cord body enhances ride quality while Max Flange Shields help resist rim damage due to accidental curbing.
|,|"Shipping Cost" "add(+$69)"|-||-|||-||CI-SPORT-EDITION-SE17|,||,|*CLEARANCE ITEM* ELBRUS I02 Wheel Silver 16x7.5|,|Elbrus-I02|,|140.00|,|89.99|,||,||,|0.000 |,||,||,||,|Sport Edition SE17 Wheel Silver 17x7.5
*Only 1 available at this price, final sale
*Local Pick Up available in Irvine, CA
Size 16x7.5
Lug pattern 5x112
Offset +45mm
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||EXHAUSTWRAPKIT|,|ENPE19|,|*CLEARANCE ITEM* Exhaust Wrap Kit|,|WRAP-kit|,|109.99|,|89.95|,||,||,|0.000 |,||,||,||,|Exhaust Wrap Kit
Exhaust wraps help to retain heat in your exhaust system, which increases horsepower while reducing radiant heat damage. By wrapping the header and exhaust system it maintains hotter exhaust gases, decreases the density, and allows the exhaust gas to exit the system faster! Greater exhaust scavenging is produced and lowers intake temperatures: that equals more horsepower. Our Premium exhaust wrap has a special heat coating that can withstand 1200°F continuous and 2000°F intermittent. Exhaust wrap can be fastened with Thermal-Tie, hose clamps, or wire.
304 Stainless Steel Cable Ties - Easy to use-- no bands or buckles required! Simply pull the tail end through the head and tighten, just like plastic wire ties. There are no sharp edges, and are easy to handle. The low profile makes them ideal for any tight fit application. 304 stainless steel construction, 3/16" width, and a thickness of .010"
Kit includes
* 2" x 50' of exhaust wrap
* Ten 11" stainless steel cable ties
It takes roughly 45 feet to do a Miata.
|,|||-||FRLABLPLWICH|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|*CLEARANCE ITEM* Front Large Black Plate With Chrome Teardrop|,|AGI-MAZ2CB|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|Raised Mazda Miata Chrome logo mounted on a black powder-coated metal plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||ZOO-N-CC|,||,|*CLEARANCE ITEM* Front Large Stainless Plate With Chrome Miata Zoom Zoom Logo|,|zoo-n-cc|,|49.95|,|31.60|,||,||,||,||,||,||,|Front Large Stainless Plate With Chrome Miata Zoom Zoom Logo
Raised Miata MX-5 Chrome logo mounted on a stainless powder-coated metal plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||FRLASTPLWICH|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|*CLEARANCE ITEM* Front Large Stainless Plate With Chrome Teardrop|,|AGI-MAZ2CC|,|49.99|,|35.99|,||,||,|0.000 |,||,||,||,|Raised Mazda Miata Chrome logo mounted on a mirror polished stainless steel plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||GENINUE-MAZDA-MIATA-DRIVER-S-SIDE-OUTSIDE-MANUAL-MIRROR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Geninue Mazda Miata OEM Driver's Side Outside Manual Mirror 1990-1997|,|NA05-69-180-XX|,|283.37|,|224.02|,||,||,|0.000 |,||,||,||,|Geninue Mazda Miata OEM Driver's Side Outside Manual Mirror 1990-1997
Geninue Mazda Miata Driver's Side Outside Manual Mirror(colored).Mirror fading on you? Try replacing it with this brand new factory mirror. Please state VIN number at checkout and/or paint code.
|,|"Color" "Select Here" "Classic Red" "Brilliant Black PZ"|-||-|||-||GENUINE-MAZDA-MIATA-DOOR-BELT-KIT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Door Belt Kit|,|NA01-58-810F-NA01-59-810F|,|262.66|,|218.04|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Door Belt Kit
Genuine Mazda Miata Door Belt Kit. Replace both the driver's side and the passenger's side with this kit. Includes both sides.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-DRIVER-S-SIDE-BELT-MOULDING|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Driver's Side Belt Moulding|,|NA01-59-810F|,|131.33|,|109.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Driver's Side Belt Moulding
Genuine Mazda Miata Driver's Side Belt Moulding old and brittle? Replace it with a new Mazda Factory part.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-DRIVER-S-SIDE-TURN-AND-PARKING-LAMP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Driver's Side Turn and Parking Lamp|,|NA01-51-07XA|,|139.47|,|122.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Driver's Side Turn and Parking Lamp
Genuine Mazda Miata Driver's Side Turn and Parking Lamp. Front turn signal broken or fading? Replace with this factory parking lamp. Lens and housing only. Does not include bulb or socket.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-FRONT-TAG-BRACKET|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Front Tag Bracket|,|NA01-50-180A-9994-00-603B-2|,|46.63|,|36.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Front Tag Bracket
Genuine Mazda Miata Front Tag Bracket bent or missing? Replace it with a new Mazda Factory part.
Comes with 2 OEM Tag Bracket Nuts also
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||NE51-64-331B-02|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata MX-5 OEM Shift Boot 2006-2015|,|NE51-64-331B-02|,|56.19|,|49.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Shift Boot 2006-2015
|,|||-||GENUINE-MAZDA-MIATA-MX-5-TOUCH-UP-PAINT-APPLICATORS-0-5-FL-OZ|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata MX-5 OEM Touch Up Paint Applicators 1/3 fl.oz|,|OEM-0000-92-MX5|,|16.95|,|13.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata MX-5 OEM Touch Up Paint Applicators 1/3 fl.oz
Genuine Mazda Miata MX-5 Touch Up Paint Applicators 1/3 fl.oz.This new and improved product includes a tip that has a pen attached to a flexible bottle for easy application. If not clear on color please state the last 8 of your VIN at checkout.
|,|"Year" "Select Here" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015" "2016" "2017" "2018" "2019" "2020" "2021" "2022"|-||-|"Color" "Select Here" "Brilliant Black Clearcoat (A3F)" "Black Mica (16W)" "Velocity Red Mica (27A)" "Liquid Silver (38P)" "Copper Red (32V)" "Dolphin Gray (39T)" "Sunlight Silver Metallic (22V)" "True Red (A4A)" "Stormy Blue (35J)" "Black Cherry Mica (28W)" "Sparkling Black Mica (35N)" "Galaxy Gray (32S)" "Titanium Gray Metallic (29Y)" "Crystal White Pearl (34K)" "Highland Green Mica (35K)" "Winning Blue Metallic (27B)" "Jet Black (41W)"|-||-|||-||NF28-R1-411D|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hard Top Weather Stripping 2006-2009|,|NF28-R1-411D|,|326.88|,|282.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Hard Top Weather Stripping 2006-2009
REFERENCE #12 IN SECOND ILLUSTRATION
|,|||-||MIREWANO|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Replacement Washer Jet Nozzle 1990-1997|,|DB02-67-510|,|28.84|,|24.85|,||,||,|0.000 |,||,||,||,|These Genuine Mazda Miata OEM Replacement Washer Jet Nozzle are for years 1990-1997.
Priced Per Washer Jet Nozzle. Make sure you update the quantity in your cart to 2 if you like to change both Washer Jet Nozzle.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||20FRMUDGU|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Splash Mud Guards Front 2006-2008 (Pair)|,|N-121-V3-450F|,|195.95|,|149.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Splash Mud Guards Front 2006-2008 (Pair)
SPLASH MUD GUARDS, FRONT (SET OF 2 - NOT FOR USE WITH ACCESSORY SIDE SILLS)
These come pre-painted to match your car, please supply your VIN in the comments section of your order.
For Mazda MX-5 Miata Years: 2006, 2007, and 2008
|,|"Select Color" "Select Here" "Brilliant Black (A3F)" "True Red (A4A)" "Copper Red (32V)" "Marble White (A5M)" "Sunlight Silver (22V)" "Galaxy Gray (32S)" "Stormy Blue Mica (35J)" "Highland Green (35K)"|-||-|||-||GEMAMIMBA19R|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM "MAZDA" Badge 1990-1997|,|907-761|,|45.99|,|29.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM "MAZDA" badge for the years 1990-1997. Please select Rear or Front for the MAZDA badge for your Miata.
|,|"Select" "Front" "Rear"|-||-|||-||GEMAMIMBA19R1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM "MAZDA" Badge 1999-2005 - Rear|,|907-762|,|39.99|,|25.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM "MAZDA" badge for the years 1999-2005. This is the MAZDA badge that goes on the Rear of the 1999-2005 Miatas.
|,|||-||GEMAMIOEM20M|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM 2004 MAZDASPEED Racing Hart Alloy 17x7 Silver|,|OEM-9965-19-7070|,|648.78|,|582.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM 2004 MAZDASPEED Racing Hart Alloy 17x7 Silver
Came on 2004 Sport Edition models but will fit all 1990-2005 models.
Price is per wheel*
*Center caps not included
VIN REQUIRED at checkout for wheel and center caps
|,|"Shipping cost" "add(+$59)"|-||-|||-||60KMIMAPA|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM 30K Mile Maintenance Package|,|235-200|,|196.45|,|164.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM 30K Mile Maintenance Package
One of the most important things to do to keep you Miata running properly is to follow your Miata's maintenance schedule. We've put together these packages to make it easy to keep your Miata in tip-top shape! The parts below should be replaced every 30,000.
If you are not that handy and would rather a mechanic do the work, save money and get the job done right by supplying them with Genuine Mazda parts and have them charge you for labor only.
Take care of your Miata and it will take care of you!
|,|"Select Year" "Select Here" 90-92 93-97 99-00 "01-05 add(+$66.00)"|-||-|||-||60KMIMAPA1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM 60K Mile Maintenance Package - Sale!|,|235-399|,|526.99|,|396.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM 60K Mile Maintenance Package
One of the most important things to do to keep you Miata running properly is to follow your Miata's maintenance schedule. We've put together these packages to make it easy to keep your Miata in tip-top shape! The parts below should be replaced every 60,000 miles.
If you are not that handy and would rather a mechanic do the work, save money and get the job done right by supplying them with Genuine Mazda parts and have them charge you for labor only.
Take care of your Miata and it will take care of you!
|,|"Select Year" "Select Here" "1990-1993" "1994-1997 add(+$50)" "1999-2000 add(+$60)" "2001-2005 add(+$70)"|-||-|"Do You Have Power Steering?" Yes No|-||-|||-||ANDEFUBL92|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Antenna / Defog Fuse Block 1990-1997|,|N008-66-730|,|54.90|,|38.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Antenna / Defog Fuse Block 1990-1997
If you are planning to install a hard top wiring harness to your 1990-1997 miata and DO NOT have a power antenna, you will need this part.
This part is also used for 1990-1997 to upgrade to a power antenna
|,|"Miata Year" "Select Here" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||ARMAWIRE90|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Arm/Base Manual Window Regulator 1990-2005|,|909-461|,|125.49|,|109.02|,||,||,|0.000 |,||,|vregr|,||,|Genuine Mazda Miata OEM Arm/Base Manual Window Regulator 1990-2005
|,|"Select Year" "Select Here" "1990-1997 Driver's side add(+$40)" "1990-1997 Passenger side" "1999-2005 Driver's side add(+$40)" "1999-2005 Passenger side add(+$40)"|-||-|||-||BPIRE19|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM B Pillar Retainers 1990-2005 (Pair)|,|909-990|,|100.78|,|83.02|,||,||,|0.000 |,||,|aga|,||,|Genuine Mazda Miata OEM B Pillar Retainers 1990-2005
Extra pieces needed only for 1990-2005 top installation. Comes with both right and left pieces.
Price is for the PAIR (Right and Left)
|,|"Need New B Pillar Screws?" "No Thanks" "Yes I like New Screws add(+$7.99)"|-||-|||-||90MAPA|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Basic Maintenance Package|,|235-100|,|102.55|,|79.02|,||,||,|0.000 |,||,|asdga|,||,|Genuine Mazda Miata OEM Basic Maintenance Package
One of the most important things to do to keep you Miata running properly is to follow your Miata's maintenance schedule. We've put together these packages to make it easy to keep your Miata in tip-top shape!
If you are not that handy and would rather a mechanic do the work, save money and get the job done right by supplying them with Genuine Mazda parts and have them charge you for labor only!
(4) Spark Plugs, (4) Oil Filter & Drain Plug Washer, (1) Air Filter
|,|"Select Year" "Select Here" 1990-1992 1993-1997 1999-2002 "2003-2005 add(+$15)" "2006-2012 add(+$40)"|-||-|||-||CLUBNA-EUNOS-KEY-BLANK|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* GENUINE Mazda Miata OEM Blank Key Without Immobilizer 1999-2003|,|GD7B-76-201A|,|21.00|,|15.70|,||,||,|0.000 |,||,||,||,|GENUINE Mazda Miata OEM Blank Key Without Immobilizer 1999-2003
Key Blank - without Immobilizer
|,|||-||GEMAMIBRPAD11|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Brake / Clutch Pad 1990-2006|,|OEM-B092-43-028|,|8.98|,|6.99|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Brake / Clutch Pad 1990-2006 (manual transmision only)
Genuine Mazda Miata OEM Pedal Pad. This is for either the brake or clutch pedal. Price is for one pad.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005" "2006"|-||-|||-||NC10-55-210B|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Center Bezel, Face Plate 1999-2003|,|NC10-55-210B|,|126.05|,|95.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Center Bezel, Face Plate 1999-2003
Description: W/O 10TH ANNIVERSARY
|,|||-||CONSOLELIDS|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Center Console Lid 1990-2000|,|OEM-NA01-64-450B-00|,|145.10|,|119.02|,||,||,|0.000 |,||,|dfgdf|,||,|Genuine Mazda Miata OEM Center Console Lid
For is for the console lid between the seats. Additional pieces (for 90-97 only)are sold only as additional options, please select below. The 99+ comes complete with all parts.
|,|"Select Year" "90-97 Black Only" "99-00 Black" "99-00 Tan"|-||-|||-||CI-CENTER-BEZEL-NB|,||,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Center Dash Faceplate 1994-1997 Without CD Player|,|ci-center-bezel-nb|,|120.00|,|74.99|,||,||,|0.000 |,||,||,||,|*Only 1 available at this price, open box, final sale
*Light Scratch Pictured
*Mazda Part# NB38-55-210
*Local Pick Up available in Irvine, CA
If your current Miata center dash faceplate is cracked or damaged, this genuine OEM center dash faceplate will give your interior a new and fresh look. This part is often also referred to as a "radio bezel".
|,|||-||CENDASFAC|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Center Dash Faceplate 1990-1997|,|OEM-NA01-55-210B-00|,|137.01|,|113.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Center Dash Faceplate
If your current Miata center dash faceplate is cracked or damaged, this genuine OEM center dash faceplate will give your interior a new and fresh look. The Genuine Mazda Miata Center Dash Faceplate comes with one addition clip to be used with the original clips. This part is often also referred to as a "radio bezel".
Comes in black only.
|,|"Select Year" "Select Here" "1990-1993" "1994-1997 add(+$5)"|-||-|||-||GEMAMIOEMDOH|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Chrome Interior Door Handle 2001-2005|,|OEM-N067-59-330E|,|72.66|,|49.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Chrome Interior Door Handle 2001-2005, 2004-2005 Mazdaspeed
- 2001-2005 Miata - Chrome Finish
- 2004-2005 Mazdaspeed - Satin Finish
Make sure to select which side when ordering*
|,|"Select Side" "Select Here" "Driver Side (N067-59-330E)" "Passenger Side (N067-58-330E)" "Mazdaspeed Driver Side (N068-59-330) add(+$25)"|-||-|||-||MACILI|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Cigarette Lighter|,|925-301|,|58.44|,|48.02|,||,||,|0.000 |,||,|klhjlhu|,||,|Genuine Mazda Miata OEM Cigarette Lighter for years 1990-2005
|,|"Select Year" "90-97" "99-00" "01-05"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CLUB-DASH-STRIPE-IN-BLACK-GENUINE-MAZDA-MIATA-CLUB-DASH-STRIPE-IN-BLACK|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Club Dash Stripe in Black 2006-2015|,|NR94-55-254|,|127.66|,|108.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Club Dash Stripe in Black
Genuine Mazda Miata Club Dash Stripe in Black.Get the look of the Club Trim
This is a Dashboard Emblem. (Decal)
|,|"Year" "Select Year" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CLUB-DASH-STRIPE-IN-RED|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Club Dash Stripe in Red 2006-2015|,|NR95-55-254|,|127.66|,|108.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Club Dash Stripe in Red
Genuine Mazda Miata Club Dash Stripe in Red.Get the look of the Club Trim
This is a Dashboard Emblem. (Decal)
|,|"Year" "Select Year" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CLUB-STRIPE-KIT-IN-BLACK|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Club Stripe Kit in Black 2006-2015|,|NP07|,|269.38|,|219.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Club Stripe Kit in Black
Genuine Mazda Miata Club Stripe Kit in Black.Get the look of the Club Trim.
|,|"Year" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CLUB-STRIPE-KIT-IN-RED|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Club Stripe Kit in Red 2006-2015|,|NP08|,|269.38|,|219.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Club Stripe Kit in Red
Genuine Mazda Miata Club Stripe Kit in Red. Get the look of the Club Trim.
|,|"Miata Year" "Select Here" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||OEMWABYHO90|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Coolant Hose Kit 1990-2005|,|905-425|,|219.99|,|179.02|,||,||,|0.000 |,||,||,||,|Our Genuine Mazda Miata Coolant hose kit includes heater, bypass and radiator hoses.
9 Hoses in the Package
|,|"Select Year" 90-93 94-97 99-05|-||-|||-||GENUINE-MAZDA-MIATA-OEM-COOLANT-BOTTLE-SUB-TANK-1990-2005--FACTORY-BP4W-15-350B|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Coolant Overflow Tank (Expansion Tank) 1999-2005|,|OEM-BP4W-15-350B|,|86.43|,|73.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Coolant Overflow Tank (Expansion Tank) 1999-2005
For Mazda Miata Years: 1999, 2000, 2001, 2002, 2003, 2004, and 2005.
|,|||-||GEMAMICU|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Cubby 1990-1997|,|OEM-LA03-55-235A|,|44.33|,|34.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Cubby 1990-1997
Is your cubby that sits below the center dash faceplace broke or cracked? Well Go Miata has the peace you have been looking for! This is a Genuine Mazda Miata OEM Cubby and it comes in black color.
The cubby is for the years 1990-1997 AM/FM, WO CDSC
2"tall x 7-3/8" wide (Face)
VIN REQUIRED at checkout.
|,|||-||DEDESW94|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Defog / Defroster Switch 1994-1997|,|909-948|,|101.65|,|87.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Defog / Defroster Switch 1994-1997
If you are adding the hard top wiring harness and don't have one of these already on your 1994-1997 you'll need this part.
|,|"Year" "1994" "1995" "1996" "1997"|-||-|||-||DEDERE92|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Defroster Relay 1991-2000|,|LA40-67-740|,|44.20|,|38.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Defroster Relay 1991-2000
This is the Defroster relay needed to install a hard top wiring harness for your 1991-2000.
|,|||-||GEMAMIDOHA19|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Door Handle 1990-1997|,|909-410|,|185.95|,|132.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Door Handle for year 1990-1997
|,|"Select Side" "Drivers Side" "Passengers Side add(+$5)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-DOOR-JAMB-SWITCH-1990-1997|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Door Jamb Switch 1990-1997|,|LC11-66-540|,|17.95|,|15.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Door Jamb Switch 1990-1997
|,|||-||GENUINE-MAZDA-MIATA-OEM-DRIVER-SIDE-LEFT-DOOR-LOCK-BARREL-AND-MATCHING-KEY|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Driver Side - Left Hand Door Lock Barrel and Matching Key 1990-1997|,|OEM-N001-76-220E|,|83.41|,|71.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Driver Side - Left Hand Door Lock Barrel and Matching Key
For Mazda Maita Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||GEMAMIOEMFAL|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Factory Lower Front Bumper Lip 1999-2005|,|OEM-NC10-51-9K0A|,|119.30|,|98.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Factory Lower Front Bumper Lip 1999-2005
Skirt Front Air Dam attaches to Bottom of Front Bumper
See #8 on the picture.
Color: Black
|,|||-||B61P-15-140A|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Factory Radiator Cooling Fan Blade 1990-1997|,|B61P-15-140A|,|77.11|,|57.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Factory Radiator Cooling Fan Blade 1990-1997
|,|||-||GEMAMIOEMFAR|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Factory Radiator Cooling Fan Blade, Motor, Shroud 1990-1997|,|OEM-B61P-15-140A|,|493.54|,|389.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Factory Radiator Cooling Fan Blade, Motor, Shroud 1990-1997.
PART CAN BE FOUND AS REFERENCE #1, 2, and 3 All
(BPE8-15-150 -1,2, B61P-15-210B -3)
|,|"Select Transmission" "Manual" "Automatic add(+$65)"|-||-|||-||BPE8-15-150|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Factory Radiator Cooling Fan Motor 1990-1997|,|BPE8-15-150|,|317.37|,|239.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Factory Radiator Cooling Fan Motor 1990-1997
|,|||-||B61P-15-210B|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Factory Radiator Cooling Fan Shroud 1990-1997|,|B61P-15-210B|,|119.36|,|93.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Factory Radiator Cooling Fan Shroud 1990-1997
|,|||-||NAY1-52-110|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM FENDER 1990-2015|,|NAY1-52-110|,|384.29|,|229.02|,||,||,||,||,||,||,|Mazda Miata OEM FENDER 1990-2015
Manufacturer: Genuine Mazda Original Parts
PART CAN BE FOUND AS REFERENCE #1 IN ILLUSTRATION
|,|"Select Year" "Select Here" "1990-1997" "1999-2005 add(+$29)" "2006-2015 add(+$135)"|-||-|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|"Shipping & Handling" "add(+$109)"|-||-|||-||OEMFRBO|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Frankenstein Bolts 1990-2008 (Pair)|,|909-998|,|79.47|,|49.98|,||,||,|0.000 |,||,|adfa|,||,|Genuine Mazda Miata OEM Frankenstein Bolts 1990-2005 (Pair)
These are used as a mounting point for the hardtop. This Frankenstein Bolts are for years 1990-2005 Mazda Miata's.
Price is for the pair.
|,|"Select Year" "Select Here" "1990-2005" "2006-2008 (NF28R138XB) add(+$65)|-||-|||-||NA75-50-0K7A|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Front Bumper Upper Seal Panel Cover 1990-1997|,|NA75-50-0K7A|,|22.95|,|17.99|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Front Bumper Upper Seal Panel Cover 1990-1997
|,|||-||99MUDFRON|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Front Mud Guards 1999-2000|,|NC10-V3-450F-XX|,|109.00|,|93.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Mud Guards 1999-2000
*Only available in primer grey color*
|,|||-||GEMAMIOR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Front Ornament|,|907-760|,|39.99|,|32.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Ornament for years 1999-2008
|,|"Select Year" "1999-2000" "2001-2005" "2006-2008"|-||-|||-||NA01-51-5EXA|,|NBLIGHTING|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM FRONT Side Marker Lamp 1990-2005|,|NA01-51-5EXA|,|58.02|,|49.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM FRONT Side Marker Lamp 1990-2005
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||GEMAMIFUPRRE3|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Fuel Pressure Regulator 1999-2005|,|BP4W-13-280B|,|212.13|,|172.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata MX-5 fuel pressure regulator for the 1999-2005.
|,|||-||GEMAGASCAP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Gas Cap 1990-2005|,|912-201|,|45.50|,|37.02|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Gas Cap 1990-2005
Drove off again without replacing your Miata gas cap after fill up? This Genuine Mazda Miata gas cap is what you need!
Please Select the Gas Cap Year for your Miata.
90-95: NA02-42-250
96-97: NB38-42-250
99-03: NC10-42-250B
04-05: NC10-42-410D
|,|"SELECT YEAR" "Select Here" "1990-1995" "1996-1997" "1999-2003" "2004-2005 add(+$8.00)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-GAS-CAP-2006-2012|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Gas Cap 2006-2012|,|OEM-FE02-42-250B|,|35.25|,|28.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Gas Cap 2006-2012
Drove off again without replacing your Miata gas cap after fill up? This Genuine Mazda Miata gas cap is what you need!
|,|||-||GENUINE-MAZDA-MIATA-OEM-GAS-CAP--CX-7-07-09--MX-5-06-13--RX-8-04-11-|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Gas Cap 2006-2020|,|FE02-42-250B|,|45.57|,|26.85|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Gas Cap 2006-2020
Genuine Mazda Gas Cap lost, leaking or causing the check engine light to come on? Replace it with a new Mazda factory gas cap.
|,|"Select Year" "Select Here" "2006-2015" "2016-2020 add(+$12)"|-||-|||-||GEMAMIGLBOXL|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Glove Box Latch Assembly Kit 1994-2005|,|909-930|,|32.98|,|24.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Glove Box Latch Assembly Kit for all Miata years.
|,|"Select Option" "Select Here" "1994-1997 Black Color" "1994-1997 Tan Color add(+$3)" "1999-2005 Black Color add(+$16.00)"|-||-|||-||GEMAMIHATOPD|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hard Top Deck Lid Hook Plate|,|909-580|,|70.80|,|59.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Hard Top Deck Lid Hook Plate is the piece that connects the Frankenstein Bolt to your Miata.
|,|"Select Year" "1990-2005 Driver's Side" "1990-2005 Passengers Side" "2006-2008 Driver's Side" "2006-2008 Passengers Side"|-||-|||-||NA01-63-895A|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hard Top Glass Dam 1990-2008|,|NA01-63-895A|,|29.05|,|22.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Hard Top Glass Dam 1990-2008
#9 in illustration
|,|||-||MAZDA-MIATA-HARD-TOP-REAR-CATCH-SCREW-1990-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hard Top Rear Catch Screw 1990-2005|,|9977-10-412|,|3.99|,|2.98|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Hard Top Rear Catch Screw 1990-2005
Hard Top Rear Catch Screw Fits: Mazda Maita Years 1990-2005
*** Product images may differ from actual product appearance ***
|,|||-||GEMAMIOEMHAR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hard-Top Rear Weather Stripping 1990-2005|,|OEM-NA01-R1-89XB|,|131.40|,|111.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Hard Rear Weather Stripping 1990-2005
|,|||-||GEMAMIOEMHAT3|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hard-Top Side Weather Stripping 1990-2005|,|OEM-NA01-R1-881B|,|105.98|,|88.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Hard-Top Side Weather Stripping 1990-2005
*One side per order, make sure to select which side is needed. If both sides are needed, be sure to order each side individually.
|,|"Select Year" "Select Here" "1990-1997" "1999-2005 add(+$99)"|-||-|"Select Side" "Select Here" "Driver" "Passenger"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-HARDTOP-REAR-EDGE-PROTECTOR-STRIP-CENTER-BELT-MOULDING-1990-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hardtop Rear Edge Protector Strip (Center Belt Moulding) 1990-2005|,|NA01-R1-935B|,|105.99|,|78.05|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Hardtop Rear Edge Protector Strip (Center Belt Moulding) 1990-2005
New length of flexible edging strip for the rear of the hardtop. Fits Mazda MX-5 & Eunos Roadster NA & NB series, 1989 to 2005.
The Original Mazda Part NA01-R1-935B.
* This item need's special care for shipping and handling.
|,|"Shipping & handling fee" "add(+$39)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-HARDTOP-REAR-EDGE-PROTECTOR-STRIP-DRIVER-SIDE-BELT-MOULDING-1990-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hardtop Rear Edge Protector Strip (Driver Side Belt Moulding) 1990-2005|,|NA01-R1-946A|,|28.63|,|25.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Hardtop Rear Edge Protector Strip (Driver Side Belt Moulding) 1990-2005
Hardtop Trim Protector Fits: 1990-2005 Miata - Driver Side
|,|||-||GENUINE-MAZDA-MIATA-OEM-HARDTOP-REAR-EDGE-PROTECTOR-STRIP-PASSENGER-SIDE-BELT-MOULDING-1990-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Hardtop Rear Edge Protector Strip (Passenger Side Belt Moulding) 1990 2005|,|NA01-R1-936A|,|28.63|,|25.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Hardtop Rear Edge Protector Strip (Passenger Side Belt Moulding) 1990 2005
Hardtop Trim Protector Fits: 1990-2005 Miata - Passenger Side
|,|||-||GEMAMIHABA|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Harmonic Balancer and Key|,|909-993|,|269.99|,|184.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Harmonic Balancer
Includes both the Crankshaft Pulley and key.
Crankshaft Pulley SKU:
90-91: B6S7-11-401A
91-93: B6S8-11-401
94-97: BPD3-11-401A
97-05: BPD4-11-401
|,|"Select Year" "Select Here" "1990-1991 to VIN 900916 add (+$35)" "1991-1993 from VIN 900910" "1994-1997 to VIN 970801 add(+$50)" "1997-2005 from VIN 970801 add(+$20)"|-||-|||-||GEMAMIHERERO|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Headlamp Retract Rod|,|909-118|,|27.92|,|23.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Headlamp Retract Rod - Fits Miata years 1990-1997.
|,|||-||HATOPWIHA92|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Heater Defroster Wiring Harness 1991-2005|,|OEM-N007-67-060A|,|210.17|,|174.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Heater Defroster Wiring Harness 1991-2005
Genuine Mazda Miata 1991-1997 & 1999-2005 Hard Top Wiring Harness. This harness plugs into the harness on your Miata and completes the circuit to the hardtop defroster.
|,|"Select Year" "Select Here" "1991-1997" "1999-2005"|-||-|||-||NF77-67-SH0A|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Heater Defroster Wiring Harness 2006-2008|,|NF77-67-SH0A|,|42.36|,|44.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Heater Defroster Wiring Harness 2006-2008
|,|||-||OEM-IDLE-AIR-GASKET-NA2|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Idle Air Control Valve Gasket 1994-1997|,|OEM-B6BF-13-W89|,|26.32|,|20.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Idle Air Control Valve Gasket 1994-1997
Fits: 1994-1997 Miata
|,|||-||NA01-59-330C-00|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Inside Handle 1990-1997|,|NA01-59-330C-00|,|56.04|,|45.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Inside Handle 1990-1997
NA01-59-330C-00 - Driver Side
NA01-58-330C-00 - Passenger Side
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-INTERIOR-WINDSHIELD-MIRROR-1995-2008|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Interior Windshield Rear View Mirror 1990-2024|,|HG82-69-220B|,|140.17|,|112.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Interior Windshield Rear View Mirror 1990-2024
Rear View Interior Mirror
Designed To Fit Mazda MX-5 Miata 1995-2008
100% Genuine - Manufactured By Mazda For Mazdas
Item Weight: 2 pounds (Estimate)
Product Dimensions: 11 x 7 x 3 inches (Estimate)
SKU: 1990-1995 NA01-69-220A
SKU: 1996-2008 HG82-69-220B
SKU: 2009-2018 KD33-69-220B - Day/night, auto. Without smart city brakes, with garage opener. Without high beam control, without high beam control. With auto dimming, without Smart City Brake with garage opener.
NOTE: Picture shown is for illustration purpose only. Actual product may vary.
|,|"Select Year" "Select Here" "1990-1995 (NA01-69-220A)" "1996-2008 (HG82-69-220B)" "2009-2024 (KD33-69-220B) add(+$270)"|-||-|||-||GEMAMILEHAGA|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Left Hand Gasket for the Hard Top|,|NA01-R1-874|,|45.99|,|35.08|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Left Hand Gasket for the Hard Top is priced for one left hand gasket.
The picture above show's left hand gasket.
|,|||-||GENUINE-MAZDA-MIATA-MANUAL-WINDOW-KIT-1990-1997|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Manual Window Kit 1990-1997|,|PK5856059560|,|364.18|,|298.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Manual Window Kit 1990-1997
Genuine Mazda Miata Manual Window Kit 1990-1997. Want to replace the power windows with a manual kit? Every thing you need is here.
* 2 Regulators
* 2 Handles
* 2 Escutcheons
* 2 Window Handle Bezels
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GEMAMIMEHO20|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Meter Hood 1999-2005|,|OEM-NC10-55-420B|,|129.99|,|98.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Meter Hood 1999-2005
If your current Miata metering hood is cracked or needs replacement, this genuine Mazda piece is just what you need.
Color: Black
|,|||-||GEMAMEHOWIN1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Meter Hood w/BLACK Interior 1990-1997|,|907-620|,|198.25|,|163.02|,||,||,|0.000 |,||,|qewr|,||,|Genuine Mazda Miata OEM Meter Hood w/BLACK Interior 1990-1997
If your current Miata metering hood is cracked or needs replacement, this genuine Mazda piece is just what you need.
All hoods are black, but there is a difference in the part between Miatas with the Black interior versus those with Tan.
|,|"Select Year" "Select here" "1990-1993" "1994-1997"|-||-|||-||CI-OEM-METER-HOOD-W-TAN-NA|,||,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Meter Hood w/Tan Interior 1991-1993|,|ci-oem-meter-hood-w-tan-na|,|200.00|,|158.00|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Meter Hood w/Tan Interior 1991-1993
*Only 1 available at this price, final sale
*Local Pick Up available in Irvine, CA
If your current metering hood is cracked or needs replacement, this genuine Mazda piece is just what you need.
All hoods only come in the color black, but there is a difference in the part between Miatas with the Black interior versus those with Tan. If you are looking for a Black hood, but have a Tan interior, this is the part you are looking for. (There is no 1990, because there was no 90 with Tan interior)
|,|||-||GEMAMEHOWIN|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Meter Hood w/Tan Interior 1991-1997|,|907-625|,|266.22|,|192.02|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Meter Hood w/Tan Interior 1991-1997
If your current metering hood is cracked or needs replacement, this genuine Mazda piece is just what you need.
All hoods only come in the color black, but there is a difference in the part between Miatas with the Black interior versus those with Tan. If you are looking for a Black hood, but have a Tan interior, this is the part you are looking for. (There is no 1990, because there was no 90 with Tan interior)
|,|"Select Year" "Select Year" "1991-1993" "1994-1997"|-||-|||-||MAMIMOMO1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Motor Engine Mount 1990-1997|,|921-910|,|75.72|,|62.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Motor Mount are sold each for years 1990-1997
|,|||-||GEMAMUDGU|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Mud Guards 2001-2005|,|909-760|,|109.00|,|83.95|,||,||,|0.000 |,||,|vbtrh|,||,|Genuine Mazda Miata OEM Mud Guards For Years 2001-2005.
Colors are no longer available by Mazda
*Only available in primer grey color
|,|"Please Select" "Front Set add(+$10)" "Rear Set"|-||-|||-||OILLEDI|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Oil Dipstick 1990-1993|,|903-250|,|25.74|,|19.03|,||,||,|0.000 |,||,|veggr|,||,|Genuine Mazda Miata OEM Oil Dipstick 1990-1993
|,|||-||GENUINE-MAZDA-MIATA-OEM-PASSENGER-SIDE-RIGHT-HAND-DOOR-LOCK-BARREL-AND-MATCHING-KEY-1990-1997|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Passenger Side - Right Hand Door Lock Barrel and Matching Key 1990-1997|,|OEM-N001-76-210E|,|83.41|,|71.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Passenger Side - Right Hand Door Lock Barrel and Matching Key
For Mazda Maita Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||GENUINE-MAZDA-MIATA-PASSENGER-SIDE-OUTSIDE-MANUAL-MIRROR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Passenger Side Outside Manual Mirror 1990-1997|,|NA05-69-120AXX|,|283.37|,|224.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Passenger Side Outside Manual Mirror 1990-1997
Genuine Mazda Miata Passenger Side Outside Manual Mirror (colored).Mirror fading on you? Try replacing it with this brand new factory mirror. Please state last 8 of your VIN number at checkout and/or paint code if you are unsure.
|,|"Color" "Select Here" "Silver Stone Metallic 3L" "Mariner Blue DU" "Classic Red SU" "Brilliant Black PZ"|-||-|||-||MAZPOWANAS|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Antenna Assembly 1990-1997|,|OEM-0000-81-9300|,|395.95|,|375.95|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Power Antenna Assembly 1990-1997
If you are changing from manual to power antenna, a Fuse Block is needed.
|,|||-||0000-81-835A|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Antenna Mast 1990-1997|,|0000-81-835A|,|119.95|,|89.99|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Power Antenna Mast 1990-1997
If you can hear your power antenna motor working, but the antenna isn't moving, you most likely need just this part, the antenna mast.
|,|||-||GEMAMIOEMPOA|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Antenna Mast 1999-2005|,|OEM-B05A-66-A30|,|79.81|,|56.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Power Antenna Mast
If you can hear your power antenna motor working, but the antenna isn't moving, you most likely need just this part, the antenna mast.
|,|||-||NA02-32-490C|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Steering Pressure Hose 1990-1997|,|NA02-32-490C|,|224.26|,|184.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Power Steering Pressure Hose 1990-1997
OEM Power Steering Hose
|,|||-||GEMAPOWIMO90|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Window Motor 1990-2005|,|909-451|,|296.41|,|232.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Power Window Motor for years 1990-2005
|,|"Select Year" "Select Here" "1990-1997 Driver's side" "1990-1997 Passenger side" "1999-2005 Driver's side" "1999-2005 Passenger side"|-||-|||-||GEMAWIRE90|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Window Regulator 1990-2005|,|909-471|,|179.10|,|129.99|,||,||,|0.000 |,||,|fdhs|,||,|Genuine Mazda Miata OEM Power Window Regulator for years 1990-2005
|,|"Select Year" "Select Here" "1990-1997 Driver's side" "1990-1997 Passenger side add(+$80)" "1999-2005 Driver's side add(+$70)" "1999-2005 Passenger side (+$70)"|-||-|||-||MAZPOWWINSWI|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Window Switch 1990-1997|,|907-520|,|165.18|,|148.02|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM power window switch. Comes as one unit with both switches. Different part number for manual vs. automatic. Please be sure to specify below.
For 1990-1997 Miatas ONLY
Mazda Logo is a registered trademark of Mazda Corporation.
|,|"Select" "Manual Transmission" "Automatic Transmission"|-||-|||-||GEMAMIPOWISW|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Window Switch 1999-2000|,|907-521|,|100.55|,|84.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Power Window Switch not working? Plug a new one in today.
If you are unsure of your interior color please state the last 8 of your VIN at checkout to get the correct color.
For 1999-2000 Miatas ONLY
Mazda Logo is a registered trademark of Mazda Corporation.
|,|"Select Type of Transmission" "Select Here" "Manual Transmission" "Automatic Transmission"|-||-|"Select Color" "Select Here" "Black" "Beige" "Tan"|-||-|||-||GEMAMIOEMPOW|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Power Window Switch 2001-2005|,|OEM-NC72-66-350-02|,|171.62|,|134.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Power Window Switch not working? Plug a new one in today.
If you are unsure of your interior color please state the last 8 of your VIN at checkout to get the correct color.
For 2001-2005 Years only
Mazda Logo is a registered trademark of Mazda Corporation.
|,|"Select Color" "Select Here" "Black" "Beige" "Tan"|-||-|||-||GEMARACAP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Radiator Cap 1990-2005|,|905-135|,|22.26|,|17.95|,||,||,|0.000 |,||,|dfhefh|,||,|Genuine Mazda Miata OEM Radiator Cap for years 1990-2005
|,|"Select Year" "90-97 add(+$2.00)" "99-05"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-RADIATOR-SUPPORT-UNDER-COVER-1990-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Radiator Support Under Cover 1990-2005|,|NA01-56-111F|,|135.99|,|102.02|,||,||,|3.000 |,||,||,||,|Genuine Mazda Miata OEM Radiator Support Under Cover 1990-2005
The plastic "belly pan" or undertrack beneath your engine isn`t just there for stylish good looks. It`s also there to help air go where it`s supposed to go. And over the years, they get pretty tired looking. There are some aftermarket options out there, but the factory one still does the best job of actually controlling airflow. Factory part, Mazda NA01-56-111F. Fits all 1990-2005 Miatas with the exception of the Mazdaspeed. Should fit the latter with a bit of trimming, too.
|,|||-||GENUINE-MAZDA-MIATA-OEM-RAIN-RAIL-SOFT-TOP-REAR-NE51R1560E|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Rain Rail Soft Top Rear 2006-2015|,|OEM-NE51R1560E|,|622.85|,|542.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rain Rail Soft Top Rear 2006-2015
#8 in illustration
This is the "rain gutter" type piece that every Mazda MX-5 Miata already has. It is located behind the top (you can't see it until you remove the top) and funnels the water that runs down between the top and the body of the car to drainage holes. If this piece is cracked or brittle, serious water damage can occur in your Miata.
|,|||-||GENUINE-MAZDA-MIATA-OEM-REAR-BUMPER-SKIRT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Rear Bumper Diffuser 2009-2015|,|0000-8Y-D08|,|869.95|,|599.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Bumper Diffuser 2009-2015
Genuine Mazda Miata Rear Bumper Diffuser not for use with Rear Splash Guards.
|,|"Select Year" "Select Here" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||NC10-28-011C|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM REAR Coil Spring 1999-2005|,|NC10-28-011C|,|149.51|,|122.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM REAR Coil Spring 1999-2005
|,|"Select Year" "Select Here" "1999-2000" "2001-2005 add(+$10)"|-||-|"Select Option" "Select Here" "Normal Suspension " "Sport Suspension" "Hard suspension"|-||-|||-||GEMAMIOEMREC|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Rear Combination (Tail Light) Gasket – 1990-1997|,|OEM-NA01-51-158|,|15.99|,|11.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Combination (Tail Light) Gasket – 1990-1997
*#6 shown in diagram.
**Price is per Gasket, if your both sides please change the Qty. to Two.
|,|||-||NC10-26-122B|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM REAR Knuckle 1999-2005 |,|NC10-26-122B|,|215.95|,|179.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM REAR Knuckle 1999-2005
Part can be found as reference #2 in illustration
Driver Side W/O Abs: NC10-26-122B
Passenger Side W/O Abs: NC10-26-112B
Driver Side With Abs: NC14-26-122B
Passenger Side With Abs: NC14-26-112B
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|"Select Option" "Select Here" "Without Abs" "With Abs"|-||-|||-||NB-OEM-REAR-MIATA-EMBLEM|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Rear Miata Emblem 1999-2005|,|OEM-NC10-51-721B|,|30.03|,|25.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Miata Emblem 1999-2005
-Comes with Double Sided Tape, Easy to Install
Rear Bumper Emblem Fits:
1999-2005 Miata w/o Turbo
|,|||-||CI-OEM-REAR-MUD-FLAPS-99-00|,||,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Rear Mud Guards 1999-2000|,|ci-oem-rear-mud-flaps-99-00|,|100.00|,|69.99|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Mud Guards 1999-2000
*Primer Gray ready for paint
*Only 1 available at this price, open box, final sale
*Local Pick Up available in Irvine, CA
|,|||-||GENUINE-MAZDA-MIATA-OEM-REAR-MUDFLAPS-1999-2000|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Rear Mudflaps (1999-2000)|,|NC10-V3-460F-XX|,|99.99|,|83.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Mud Guards 1999-2000
The colors are no longer available by Mazda
The part will come Primer
|,|||-||NAY1-63-930|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Rear Window Reveal Molding 1990-2005|,|NAY1-63-930|,|112.40|,|84.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Rear Window Reveal Molding 1990-2005
#23 in illustration
NAY1-63-930
|,|||-||MAZFACREPAS|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Replacement Ashtray 1990-1997|,|907-212|,|79.90|,|69.02|,||,||,|0.000 |,||,|onjio|,||,|Genuine Mazda Miata OEM Replacement Ashtray 1990-1997
Replace your broken, damaged, or faded ashtray with a factory replacement direct from Mazda Miata 1990-1997.
|,|||-||MIREWAJETNO2|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Replacement Washer Jet Nozzles 2006-2009 (Pair)|,|909-573|,|24.98|,|17.02|,||,||,|0.000 |,||,||,||,|These Genuine Mazda Miata OEM Replacement Washer Jet Nozzles are for years 2006-2009.
These Washer Jet Nozzles are Priced for the Pair!
|,|||-||GEMAMIRIHAGA|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Right Hand Gasket for the Hard Top|,|NA01-R1-864|,|45.99|,|35.08|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Right Hand Gasket for the Hard Top is priced for one right hand gasket.
The picture above show's right hand gasket.
|,|||-||GEMAMIOEMSEB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Seat Belt Receptacle 1990-1993|,|OEM-NA01-57-620B-00|,|92.98|,|79.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Seat Belt Receptacle 1990-1993
|,|"Select Side" "Select Here" "Driver add(+$10)" "Passenger"|-||-|||-||GEMAMIOEMSEB1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Seat Belt Receptacle 1994-1997|,|OEM-NA75-57-680A-00|,|89.99|,|74.93|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Seat Belt Receptacle 1994-1997
|,|"Select Side" "Select Here" "Driver add(+$25)" "Passenger"|-||-|||-||OEM-NB2SEATBELTRECPTL|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Seat Belt Receptacle Driver Side 1999-2005|,|OEM-N066-57-620B-00|,|74.71|,|61.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Seat Belt Receptacle Driver Side 1999-2005
|,|"Select Year" "Select Here" "1999-2000" "2001-2005"|-||-|||-||OEM-NB2SEATBELTRECEPT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Seat Belt Receptacle Passenger Side 1999-2005|,|OEM-N066-57-680A-00|,|65.06|,|56.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Seat Belt Receptacle Passenger Side 1999-2005
|,|"Select Year" "Select Here" "1999-2000" "2001-2005 add(+$8) "|-||-|||-||MIATFACSHIFB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Shift Boot 1990-1997|,|OEM-NA01-64-331-00|,|61.31|,|49.02|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Shift Boot 1990-1997
This is the genuine OEM "leatherette" boot around your Miata's shift knob. Comes in black only.
|,|"Year" "1990" "1991" "1992" "1993" " 1994" "1995" "1996" "1997"|-||-|||-||REPSHOCBOOT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Shock Boot 1990-1997|,|OEM-NA01-28-111|,|37.58|,|33.67|,||,||,|0.000 |,||,|gtyu|,||,|Genuine Mazda Miata OEM Shock Boot
If you are replacing your shocks, make sure to consider a set of replacement boots. Since these also act as the bumpstops in your Miata, its important that they are in good shape.
You must indicate VIN# for years 1993-1997.
Price is PER BOOT.
|,|"Select Year" "Select Year" "1990-1993" "1994-1997"|-||-|||-||CI-OEM-SIDE-MIRROR-SILVER-2004-2005|,||,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Side Mirror Driver side Silver 2004-2005|,|ci-oem-side-mirror-silver-2004-2005|,|201.00|,|144.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Side Mirror Left Driver side Power Mirror Silver 2004-2005
*Only 1 available at this price, open box, final sale
*Mazda Part# NC11-69-180G67
*Local Pick Up available in Irvine, CA
|,|||-||NA01-R1-331|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Soft Top Grab Handle 1990-2005|,|NA01-R1-331|,|69.95|,|49.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Soft Top Grab Handle 1990-2005
|,|||-||MIATSPEEDCAB|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Speedometer Cable 1990-1997|,|NA01-60-070B|,|146.38|,|122.02|,||,||,|0.000 |,||,|lo|,||,|Genuine Mazda Miata OEM Speedometer Cable 1990-1997
|,|Select "Manual" "Automatic"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-SPLASH-MUD-GUARDS-FRONT-2012-2015-PAIR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Splash Mud Guards Front 2009-2015 (Pair)|,|NH18-V3-450A-XX|,|222.95|,|189.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Splash Mud Guards Front 2009-2015 (Pair)
SPLASH MUD GUARDS, FRONT (SET OF 2 - NOT FOR USE WITH ACCESSORY SIDE SILLS)
These come pre-painted to match your car, please supply your VIN in the comments section of your order.
For Mazda MX-5 Miata Years: 2019, 2010, 2011, 2012, 2013, 2014, and 2015
|,|"Select Color" "Select Here" "Brillian Black Clearcoat (A3F)" "True Red (A4A)" "Copper Red Mica (32V)" "Liquid Silver (38P)" "Stormy Blue Mica (35J)" "Crystal White Pearl (85)"|-||-|||-||20MIMUDGURES|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Splash Mud Guards Rear 2006-2008 (Pair)|,|N-121-V3-460F|,|129.99|,|95.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Splash Mud Guards Rear 2006-2008 (Pair)
SPLASH MUD GUARDS, REAR (SET OF 2 - NOT FOR USE WITH REAR BUMPER SKIRT)
Available in Premier ONLY.
For Mazda MX-5 Miata Years: 2006, 2007, and 2008
|,|"Color" "Premier"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-SPLASH-MUD-GUARDS-REAR-2012-2015-PAIR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Splash Mud Guards Rear 2009-2015 (Pair)|,|NH18-V3-460A-XX|,|219.95|,|182.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Splash Mud Guards Rear 2009-2015 (Pair)
SPLASH MUD GUARDS, FRONT (SET OF 2 - NOT FOR USE WITH ACCESSORY SIDE SILLS)
These come pre-painted to match your car, please supply your VIN in the comments section of your order.
For Mazda MX-5 Miata Years: 2019, 2010, 2011, 2012, 2013, 2014, and 2015
|,|"Select Color" "Select Here" "Brillian Black Clearcoat (A3F)" "True Red (A4A)" "Copper Red Mica (32V)" "Liquid Silver (38P)" "Stormy Blue Mica (35J)" "Competition Yellow (A6Y)" "Crystal White Pearl (85)" "None of these see my VIN"|-||-|||-||GEMASTPL|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Striker Plate 1990-2005|,|909-987|,|49.99|,|36.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Striker Plate 1990-2005
These are the Genuine Mazda OEM Striker Plates that rest at the top of your windshield and serve as the connection point to your hard or soft top latch.
* These also do not come with the screws.
* Price is for one side only, please make sure you select the side or sides you need under the "Select Side" options. Your selecitons are driver side, passenger side, or both driver and passenger side.
|,|"Select Option" "Driver" "Passenger" "BOTH Side add(+$36.02)"|-||-|||-||GEMAMIVI1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Sun Visor 1990-2005|,|909-791|,|138.57|,|118.02|,||,||,|0.000 |,||,||,||,|Replacement genuine Mazda Miata OEM visor for the 1990-2005 Miata.
|,|"Select Year" "Select Here" "1990-1994" "1995-1997" "1999-2005"|-||-|"Select Location" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||GEMAMIOEMTAL1|,|NBLIGHTING|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Tail Lamp Lens & Housing 1999-2005|,|OEM-NC10-51-180C|,|399.99|,|212.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Tail Lamp Lens & Housing 1999-2005
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "2001-2005 Driver side" "2001-2005 Passenger side" "1999-2000 Driver side add(+$70)" "1999-2000 Passenger side add(+$70)"|-||-|||-||N001-51-155A|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Tail Light Socket 1990-1997|,|N001-51-155A|,|39.60|,|34.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Tail Light Socket 1990-1997
Part can be found as reference #5 in illustration
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$34.02)"|-||-|||-||GEMAMITEFA|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Tenax Fastener|,|909-955|,|36.99|,|25.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Tenax Fastener for the Miata Boots. This Tenax Fastener fit for all years.
Make sure you update the quantity in your cart if you need more then one tenax fastener. The tenax fastener are priced per one fastener.
|,|||-||GENUINE-MAZDA-MIATA-OEM-THERMOSTAT-1990-1993|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Thermostat 1990-1993|,|OEM-8AK1-15-171-9U|,|34.35|,|28.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Thermostat 1990-1993
Genuine Mazda Miata OEM Thermostat. For Mazda Miata years 1990, 1991, 1992 and 1993.
|,|"Thermostat Gasket" "Select Here" "Yes add(+$5.53)"|-||-|||-||OEM-THERMOSTAT-NB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Thermostat 1999-2005|,|OEM-BP6F-15-171A|,|44.61|,|36.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Thermostat and Gasket 1999-2005
*Please choose Thermostat Gasket Optioin
If you need the gasket, please check out the "YES" to add the gaskets. Thank you.
|,|"Thermostat Gasket" "Select Here" "Yes add(+$5.80)"|-||-|||-||MAZFACTHERWG|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Thermostat w/ Gasket 1994-1997|,|901-145|,|41.72|,|29.02|,||,||,|0.000 |,||,|dfgsdg|,||,|Genuine Mazda Miata OEM Thermostat w/ Gasket
|,|"Thermostat Gasket" "Select Here" "Yes add(+$5.53)"|-||-|||-||GEMAMIOEMTIC2|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Timing Cover Center Gasket 1990-1997|,|909-TCCG|,|22.99|,|18.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Timing Cover Center Gasket 1990-1997
SKU: B660-10-522
Genuine Mazda Miata OEM Timing Cover Center Gasket is for years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997.
|,|||-||GEMAMIOEMTIC|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Timing Cover Gasket 1990-1997 (Set)|,|909-TCG|,|78.92|,|63.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Timing Cover Gasket 1990-1997
The Genuine Mazda Miata OEM Timing Cover Gasket is broken up into 3 covers; the upper, center, and lower.
The upper cover has 3 gaskets, the center cover has 1 gasket, and the lower has 1 gasket.
All 5 gaskets are included one low price.
Genuine Mazda Miata OEM Timing Cover Gasket is for years: 1990, 1991, 1992, and 1993
|,|||-||GEMAMIOEMTIC3|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Timing Cover Lower Gasket 1990-1997|,|909-TCLG|,|22.69|,|17.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Timing Cover Lower Gasket 1990-1997
SKU: B660-10-502B
Genuine Mazda Miata OEM Timing Cover Lower Gasket is for years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
|,|||-||GEMAMIOEMTIC1|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Timing Cover Upper Gasket 1990-2005|,|909-TCUG|,|38.98|,|29.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Timing Cover Upper Gasket 1990-2005
The Genuine Mazda Miata OEM Timing Cover Upper Gasket has 3 gaskets.
These are priced for the set of 3 Timing Cover Upper Gaskets.
SKU: B61P-10-512, B61P-10-513, B61P-10-514
Genuine Mazda Miata OEM Timing Cover Upper Gasket is for years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, and 2005.
|,|||-||SOFTOPHARTOP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Top Latch 1990-2005|,|909-985|,|232.88|,|189.02|,||,||,|0.000 |,||,|agag|,||,|Genuine Mazda Miata OEM Top Latch 1990-2005
If your latches are worn out, these Genuine Mazda replacements are what your Miata needs.
* Price is for one side only, please make sure you select the side or sides you need under the "Select Side" options. Your selecitons are driver side, passenger side, or both driver and passenger side.
|,|"Select Side" "Driver Side" "Passenger Side" "BOTH Driver & Passenger Side add(+$189.02)"|-||-|||-||GEMAMIOEMHAT1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Top Mounting Bolt |,|909-979|,|4.99|,|2.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Top Mounting Bolt.
These Bolts are priced per bolt.
9946-40-820B: 90-05
9944-10-820B: 06-15
If you need all 4, please change the qty. to 4 during your check out.
|,|"Select Year" "Select Here" "1990-2005" "2006-2015"|-||-|||-||TOPOFDOWEST|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Top of Door Weather Stripping 1990-2005|,|909-661|,|128.76|,|109.02|,||,||,|0.000 |,||,|dsgfsf|,||,|Genuine Mazda Miata OEM Top of Door Weather Stripping 1990-2005
This is the molding that goes across the top of the door, also known as the beltline molding.
Price is for EACH side.
* Price is for one side only, please make sure you select the side or sides you need under the "Select Side" options. Your selecitons are driver side, passenger side, or both driver and passenger side.
|,|"Please Select" "1990-2005 Passenger Side" "1990-2005 Driver Side" "BOTH Driver & Passenger Side add(+$109.02)"|-||-|||-||TOPOFWIWEST|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Top of Windshield Header Weather Stripping|,|NA01-R1-711B|,|307.83|,|259.02|,||,||,|0.000 |,||,|dfafsetf|,||,|Genuine Mazda Miata OEM Top of Windshield Header Weather Stripping
This weatherstrip runs all the way across the windshield header and down both A-Pillars. (See the red arrow is pointing on the picture to the left)
Choose Year Above.
|,|"Select Year" "1990-1997" "1999-2005"|-||-|||-||GEMAMIOEMTRC|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Trunk Carpet 1990-1997|,|OEM-NA01-68-811A-04|,|262.95|,|212.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Trunk Carpet 1990-1997
|,|"Select Your Miata Year" "Select Year Here" "1990-1993" "1994-1995 (thru 1/6/95)" "1995 (from 1/7/95)" "1996-1997"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-TRUNK-CARPET-1999-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Trunk Carpet 1999-2005|,|NC10-68-81XA-04|,|81.17|,|67.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Trunk Carpet 1999-2005
|,|||-||GENUINE-MAZDA-MIATA-OEM-TRUNK-CARPET-2006-2014|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Trunk Carpet 2006-2015|,|NE51-68-81XD|,|198.95|,|159.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Trunk Carpet 2006-2015
Color: Charcoal / Black
|,|||-||GEMAMITRLOFO|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Trunk Lock for 1990-1997|,|OEM-NA14-76-230F|,|139.32|,|104.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Trunk Lock for years 1990-1997
The Lock comes with 2 new keys.
|,|||-||GENUINE-MAZDA-MIATA-OEM-TRUNK-WEATHERSTRIP-1990-1997|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Trunk Weatherstrip 1990-1997|,|OEM-NA01-56-951|,|109.43|,|98.99|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Trunk Weatherstrip 1990-1997
Number 9 on the picture.
Genuine Mazda Miata OEM Trunk Weatherstrip for Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1996, and 1997
|,|||-||NF79-56-951|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Trunk Weatherstrip 2006-2015|,|NF79-56-951-NE52-56-951B|,|71.43|,|61.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Trunk Weatherstrip 2006-2015
#5 IN SECOND ILLUSTRATION
|,|"Select Option" "Select Here" "W/O Retractable hard top" "With Retractable hard top add(+$40)"|-||-|||-||MAZOEMCLUTKI2|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Value Line Clutch Kit 1990-2005|,|906-101|,|239.00|,|169.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Value Line Clutch Kit 1990-2005
What a great value!
Includes Clutch Disc, Pressure Plate, Release Bearing, Pilot Bearing and Alignment Tool.
90-93: B634-16-490-MV
94-05: ZZP1-16-490-MV
|,|"Select Year" "1990-1993" "1994-2005 add(+$40)"|-||-|||-||MAMIVELOSITR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Vent Louver Silver Trim (each) 1990-2005|,|N067-64-81X|,|59.93|,|48.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Vent Louver Silver Trim (each). A/C vents with silver trim ring.
Don't settle for cheap imitations, this is the genuine article and fits perfectly!
Genuine Mazda Miata OEM Vent Louver Silver Trim are sold per Vent Louver.
If you need more then one, please change the Qty when you check out.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-WATER-PUMP-|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Water Pump 2003-2013|,|LF94-15-100A|,|177.76|,|149.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Water Pump
Genuine Mazda Water Pump leaking. Replace the leaking water pump with a new factory Mazda genuine waterpump. Check every 30,000 miles. Be safe and replace it at 60,000 miles.
|,|"Select Year" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013"|-||-|||-||GEMAMIOEMWH11|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Wheel 1999-2005 5-Spoke Silver 15x6 -SALE|,|OEM-9965-F6-6050|,|311.04|,|262.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel 1999-2005 5-Spoke Silver 15x6
Came on 1999-2002 Sport Miata's but will fit all 1999-2005 models.
Price is per wheel*
*Center caps not included
VIN REQUIRED at checkout for wheel and center caps
|,|"Need Center Cap?" "No Thanks" "Yes, I need a Center Cap add(+$35)"|-||-|"Shipping Cost" "add(+$49)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-WHEEL-CENTER-CAP-1999-2005-5-SPOKE-14X6|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Wheel Center Cap 1999-2005 5-Spoke 14x6, 15x6|,|OEM-NC10-37-190|,|39.39|,|34.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Center Cap 1999-2005 5-Spoke 14x6 and 15x6
Price is per Center cap
VIN REQUIRED at checkout for wheel and center caps
|,|||-||GEMAWIHA|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Window Handle 1990-1997|,|907-501|,|23.56|,|19.02|,||,||,|0.000 |,||,|rfegr|,||,|Genuine Mazda Miata OEM Window Handle for years 1990-1997
Price is per Window Handle.
|,|"Select Year" "1990-1993" "1994-1997"|-||-|||-||NA01-50-601A|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Windshield Reveal Molding 1990-2015|,|NA01-50-601A|,|79.97|,|64.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Windshield Reveal Molding 1990-2003
#6 IN ILLUSTRATION
Other Names: Molding Up Front Window
Manufacturer: Genuine Mazda Original Parts
|,|"Select Year" "Select Here" "1990-2003 add(+$15)" "2004-2015"|-||-|||-||GA7B-50-899|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Windshield Weatherstrip 1990-2005|,|GA7B-50-899|,|39.95|,|25.24|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Windshield Weatherstrip 1990-2005
Cut To Fit on Windshield
Manufacturer: Genuine Mazda Original Parts
|,|||-||NC10-67-321|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Wiper Arm 1999-2005|,|NC10-67-321|,|78.98|,|52.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Wiper Arm 1999-2005
Driver Side: NC10-67-321
Passenger Side: NC11-67-321
|,|"Select Side" "Select Here" "Passenger Side" "Driver Side add(+$12)" "Both Side add(+$64.02)"|-||-|"Do you need Wiper Arm Caps?" "Select Here" "Yes add(+$14)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-WIPER-ARM-COVER-CAP-1990-2008|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Wiper Arm Cover Cap 1990-2008|,|LA01-67-395C|,|9.99|,|6.49|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wiper Arm Cover Cap 1990-2008
|,|||-||OEMWIBLAS90B|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Wiper Blade Assembly 1990-1997 (Both Sides)|,|909-521|,|42.64|,|36.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wiper Blade Assembly 1990-1997 (Both Sides)
This is the wiper blade assembly unit that attaches to the wiper blade arm and houses the blade replacements.
This is for the pair, and they each come with a blade replacement insert already attached.
|,|||-||GEMAMIOEMWIM|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata OEM Wiper Motor 1990-2005|,|NA01-67-340E|,|407.91|,|329.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wiper Motor 1990-2005
|,|||-||GENUINE-MAZDA-MIATA-PASSENGER-S-SIDE-BELT-MOULDING|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Passenger's Side Belt Moulding|,|NA01-58-810F|,|131.33|,|109.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Passenger's Side Belt Moulding
Genuine Mazda Miata Passenger's Side Belt Moulding old and brittle? Replace it with a new Mazda Factory part.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-PASSENGER-S-SIDE-TURN-AND-PARKING-LAMP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Passenger's Side Turn and Parking Lamp|,|NA01-51-06XA|,|139.47|,|122.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Passenger's Side Turn and Parking Lamp
Genuine Mazda Miata Passenger's Side Turn and Parking Lamp. Front turn signal broken or fading? Replace with this factory parking lamp assembly.Mazda Miata Park Lamp.Lens and housing only. Does not include bulb or socket.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-RADIATOR-HOSE-KIT-1-6-90-93|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Radiator Hose Kit 1.6 90-93|,|PKMRHK16|,|53.85|,|45.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Radiator Hose Kit 1.6 90-93
Genuine Mazda Miata Radiator Hose Kit 1.6 90-93. '90-'93 1.6L Radiator hose kit. This kit contains the upper, lower and inlet radiator hoses.
|,|"Year" "1990" "1991" "1992" "1993"|-||-|||-||CI-OEM-ENGINE-START-BUTTON-RED-NC|,||,|*CLEARANCE ITEM* Genuine Mazda Miata Red Engine Start Switch 2006-2013|,|ci-oem-engine-start-button-red-nc|,|285.00|,|209.99|,||,||,|0.000 |,||,||,||,|*Only 1 available at this price, open box, final sale
*Mazda Part# NE55-V7-720F
*Local Pick Up available in Irvine, CA
Add the look and feel of a true race car with this race inspired, functional start button. It comes with detailed installation instructions.
|,|||-||GENUINE-MAZDA-MIATA-TIMING-BELT-KIT-1-6-TO-209446|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Miata Timing Belt Kit 1.6 To 209446|,|PK90TBELT|,|195.57|,|142.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Timing Belt Kit 1.6 To 209446
Mazda Miata Timing Belt Kit. Mazda recommends changing your timing belt every 60,000 miles. Includes timing belt, valve cover gasket, tensioner spring, 2 cam seals, 1 oil pump seal. NOTE: While changing the timing belt, the water pump is easily accessed. We would recommend changing it at this time also.
|,|"Year" "1990" "1991"|-||-|"VIN" "Last 6 of vin is before 209446"|-||-|||-||GENUINE-MAZDA-MIATA-VENT-LOUVER-EACH|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Vent Louver (each)|,|N001-64-81X-00|,|78.13|,|48.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Vent Louver (each)
Don't settle for cheap imitations, this is the genuine article and fits perfectly!
Genuine Mazda Miata OEM Vent Louver Silver Trim are sold per Vent Louver.
If you need more then one, please change the Qty when you check out.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-WIPER-ARM-REPLACEMENT-KIT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda Miata Wiper Arm Replacement Kit|,|67321C-67321D-76641|,|222.11|,|174.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Wiper Arm Replacement Kit
Genuine Mazda Miata Wiper Arm Replacement Kit rusty or just looking old? Includes right and left wiper arms.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GEMAMIMBA20R|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM "MAZDA" Badge 2006-2015 - Rear|,|NF79-51-711|,|39.99|,|25.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM "MAZDA" Badge 2006-2015 - Rear
Genuine Mazda Miata OEM "MAZDA" badge for the years 2006-2009. This is the MAZDA badge that goes on the Rear of the 2006-2009 Miatas.
|,|||-||GEMAMXMIOEMA|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM All Weather Floor Mats 2006-2015 - Sale! |,|OEM-0000-8B-D18A|,|169.99|,|129.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM All Weather Floor Mats 2006-2015
Genuine Mazda MX-5 Miata All Weather Floor Mats. Charcoal Black Vinyl-Front (set of 2). All weather mats feature a deep waffle design to protect the floor and carpeting from water, mud, sand and snow. Durable and easily cleaned.
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-ALLOY-ACCELERATOR-PEDAL-2016|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Alloy Accelerator Pedal 2016+|,|NA1J-V9-091|,|69.95|,|56.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Alloy Accelerator Pedal 2016+
Mazda MX-5 Miata Alloy Accelerator Pedal. Add a powerful look and help improve pedal grip in your Mazda with these high-quality aluminum Alloy Accelerator Pedal.
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-ALLOY-PEDAL-KIT-MANUAL-TRANSMISSION-2016|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Alloy Pedal Kit Manual Transmission 2016+|,|V909X-V9095-V9091|,|279.45|,|224.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Alloy Pedal Kit Manual Transmission 2016+
Mazda MX-5 Miata Alloy Pedal Kit Manual Transmission. Add a powerful look and help improve pedal grip in your Mazda with these high-quality aluminum Alloy Accelerator Pedals, Alloy Brake/Clutch and Footrest.
|,|"Fits" "Manual Transmission"|-||-|||-||B095-56-032|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Battery Tray 1990-1997|,|B095-56-032|,|29.46|,|21.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Battery Tray 1990-1997
|,|||-||0000-83-Z38|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Black Valve Stem Caps 2016+|,|OEM-0000-83-Z38|,|25.95|,|22.55|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Valve Stem Caps 2016+
Our Valve Stem Caps have the Mazda logo beautifully printed under a clear doming to achieve a jewelry quality look
and protect the logo for years to come. Black Valve Stem Caps.
|,|||-||GENUINE-2016-MAZDA-MX-5-MIATA-OEM-BRAKE-PEDAL-AUTOMATIC-TRANSMISSION-BUILT-AFTER-090115|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Brake Pedal Automatic Transmission 2016+ (built after 09/01/15)|,|OEM-K0N1-V9--093|,|125.95|,|109.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Brake Pedal Automatic Transmission 2016+ (built after 09/01/15)
Mazda MX-5 Miata Brake Pedal Automatic Transmission 2016+ (built after 09/01/2015). Add a powerful look and help improve pedal grip in your Mazda with these high-quality aluminum Alloy Brake Pedal for Automatic Transmission
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-BRAKE-PEDAL-AUTOMATIC-TRANSMISSION-2016|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Brake Pedal Automatic Transmission 2016+ (built before 09/01/15)|,|K0N1-V9--093|,|125.95|,|109.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Brake Pedal Automatic Transmission 2016+ (built before 09/01/15)
Mazda MX-5 Miata Brake Pedal Automatic Transmission 2016+ (built after 09/01/2015). Add a powerful look and help improve pedal grip in your Mazda with these high-quality aluminum Alloy Brake Pedal for Automatic Transmission
|,|||-||0000-8J-D04|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Car Cover, All-Weather 2016+|,|OEM-0000-8j-d04|,|259.99|,|209.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Car Cover, All-Weather 2016+
Also Known As:
Car Cover All Weather
Description:
Helps you keep your MX-5's finish looking like new. Custom fit with the MX-5 logo, side-mirror pockets
and rear license plate window. Weather-resistant StormProof fabric. Gray, Includes Storage Bag.
Manufacturer:
Genuine Mazda Original Parts
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-DOOR-SILL-SCUFF-PLATES-SET-OF-2-2016|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Door Sill Scuff Plates (set of 2) 2016+|,|0000-8T-D36|,|174.95|,|144.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Door Sill Scuff Plates (set of 2) 2016+
Mazda MX-5 Miata Door Sill Scuff Plates (set of 2).These gleaming doorsills are a stylish calling card to both a welcome entry and graceful exit.
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-DRIVER-SIDE-MIRROR-2012-2015|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Driver Side Mirror 2006-2015|,|NE51-69-180K-XX|,|219.93|,|186.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Driver Side Mirror 2006-2015
Genuine Mazda Miata Driver Side Electric Mirror. Painted and ready to install. Limited availability on certain colors.
Most of these come pre-painted to match your car, please supply your VIN when Checking Out.
|,|"Select Color" "Select Here" "TRUE RED(11)" "COPPER RED(74)" "VELOCITY RED(87)" "STORMY BLUE(12)" "WINNING BLUE(94)" "NORDIC GREEN(97)" "HIGHLAND GREEN (77)" "SILVER (Aluminum) (50)" "MARBLE WHITE(71)" "GALAXY GRAY(91)" "BRILLIANT BLACK(PZ)" "SPARKING BLACK (16)" "DOLPHINE GRAY (70)" "CRYSTAL WHITE (85)"|-||-|||-||GEMAMXMIOEMF|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Floor Mats with MX-5 Logo 2006-2014|,|OEM-0000-8B-D20|,|99.99|,|79.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Floor Mats with MX-5 Logo 2006-2014
Genuine Mazda Miata Black Carpet Floor Mats. Custom Fit Floor Mats (set of 2). These mats help preserve your interior carpet. Complete with the Miata logo.
|,|||-||CI-OEM-NC-FOG-LIGHT-BEZEL-SILVER|,||,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Fog Lamp Bezels 2006-2008 (Silver only)|,|ci-oem-nc-fog-light-bezel-silver|,|109.99|,|69.99|,||,||,|0.000 |,||,||,||,|*Only 1 available at this price, open box, final sale
*Mazda Part# N121-V7-247F
*Local Pick Up available in Irvine, CA
Accent your Genuine Mazda MX-5 Miata OEM Fog Lamps with these silver color bezels with stylish appeal.
For Mazda Miata Years: 2006, 2007, and 2008
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-FOOTREST-PEDAL-2016|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Footrest Pedal 2016+|,|NA1J-V9-095|,|89.95|,|72.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Footrest Pedal 2016+
2016+ Mazda MX-5 Miata Footrest Pedal.Add a powerful look and help improve pedal grip in your Mazda with these high-quality aluminum Alloy Pedals and Footrest.
|,|||-||0000-8G-D13|,|NEW|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Front Mask Bra With Air Dam 2016+|,|0000-8G-D13|,|189.95|,|149.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Front Mask Bra With Air Dam 2016+
Part: Cover, Front Mask (Models w/Air Dam)
Fits: 2016+ Club, Grand Touring, RF Club, RF Grand Touring, Sport, Launch Edition
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-FRONT-MASK-BRA-2016|,|NEW|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Front Mask Bra Without Air Dam 2016+|,|0000-8G-D12A|,|149.95|,|135.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Front Mask Bra 2016+
Mazda MX-5 Miata Front Mask Bra. It's a rough world out there. Maximize protection against nicks and scratches with Mazda's custom-tailored vinyl Front Mask.
Fits: MX-5 Miata Grand Touring 2016 to 2017
Fits: MX-5 Miata Sport 2016 to 2017
Will Not Fit A Club Model or vehicles with front air dam.
|,|"Year" "2016+"|-||-|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-PASSENGER-SIDE-MIRROR-2012-2015|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Passenger Side Mirror 2006-2015|,|NE51-69-120K-XX|,|219.67|,|186.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Passenger Side Mirror 2006-2015
Genuine Mazda Miata Passenger Side Electric Mirror. Painted and ready to install. Limited availability on certain colors.
Most of these come pre-painted to match your car, please supply your VIN when Checking Out.
|,|"Select Color" "Select Here" "TRUE RED(11)" "COPPER RED(74)" "VELOCITY RED(87)" "STORMY BLUE(12)" "WINNING BLUE(94)" "NORDIC GREEN(97)" "HIGHLAND GREEN (77)" "SILVER (Aluminum) (50)" "MARBLE WHITE(71)" "GALAXY GRAY(91)" "BRILLIANT BLACK(PZ)" "SPARKING BLACK (16)" "DOLPHINE GRAY (70)" "CRYSTAL WHITE (85)"|-||-|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-RADIATOR-RESERVOIR-COOLANT-TANK-2006-2015|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Radiator Reservoir Coolant Tank 2006-2015|,|LFG1-15-350C|,|103.71|,|84.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Radiator Reservoir Coolant Tank 2006-2015
Genuine Mazda MX-5 Miata Radiator Reservoir Coolant Tank leaking or cracked. Replace it with a New Genuine Mazda MX-5 Miata Radiator Reservoir Coolant Tank.
|,|"Select Year" "Select Here" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||GEMAMIMXREBU|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Rear Bumper Skirt 2006-2008|,|NF51-V4-930F-BB|,|489.95|,|407.02|,||,||,|30.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Rear Bumper Skirt
Complete the ground effects look with this sporty Rear Bumper Skirt.
NOTE: This Rear Bumper Skirt only comes in Primer.
REAR BUMPER SKIRT (NOT FOR USE WITH REAR SPLASH GUARDS)
For Mazda MX-5 Miata Years: 2006, 2007, and 2008
|,|"Shipping and Handling" "add(+$109)"|-||-|||-||MAZDA-MX-5-MIATA-REAR-LIP-SPOILER-PAINTED-2016|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Rear Lip Spoiler Painted 2016+|,|QNDN-51-960-XX|,|369.25|,|319.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Rear Lip Spoiler Painted 2016+
Mazda MX-5 Miata Rear Lip Spoiler Painted. Enhance the sporty look of your Mazda with a rear lip spoiler. Available in all MX-5 colors.
Meteor Gray Mica (42A) QNDN-51-960 -27
Arctic White (A4D) QNDN-51-960 -33
Jet Black Mica (41W) QNDN-51-960 -51
Soul Red Metallic (41V) QNDN-51-960 -62
Blue Reflex (42B) QNDN-51-960 -83
Crystal White Pearl (34K) QNDN-51-960 -85
Ceramic Metallic (47A) QNDN-51-960 -KM
Billiant Black (A3F) QNDN-51-960 -PZ
|,|"Select Year" "Select Here" "2016-2021"|-||-|"Select Color" "Select Here" "CRYSTAL WHITE PEARL (34k)" "ARCTIC WHITE (A4D)" "JET BLACK MICA (41W)" "METEOR GRAY MICA (42A)" "BLUE REFLEX (42B)" "CERAMIC METALLIC (47A)" "BRILLIANT BLACK (Club Model color)" "SOUL RED METALLIC (41V)" "SOUL RED CHRYSTAL (46V)"|-||-|||-||NE51-67-481A|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Reservoir Tank 2006-2015|,|NE51-67-481A|,|68.06|,|54.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Reservoir Tank 2006-2015
Reference #12 in illustration
|,|"Do you want a Reservoir Cap?" "Select Here" "Yes add(+$19.99)"|-||-|||-||20SCPL|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Scuff Plates 2006-2009!|,|909-847|,|258.95|,|219.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Chrome Scuff Plates 2006-2008. Durable, stylish chrome plates help protect the doorsills from scuffing. Easy to install, they also feature a MX-5 logo.
|,|"Select Year" 2006 2007 2008 2009|-||-|||-||MAMISEBARCO|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Seatback Bar Covers 2006-2015|,|N121-V1-690F|,|129.99|,|110.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Seatback Bar Covers (set of 2) 2006-2015.
Make the statement that your Mazda MX-5 has serious style with these body-colored seatback bar covers.
Comes in Galaxy Gray, True Red, Winning Blue, Copper Red Mica or Stormy Blue.
Available Years: 2006-2015
|,|"Select Year" "Select Here" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|"Select Color" "Select Here" "Galaxy Gray (32S)" "True Red (A4A)" "Copper Red Mica (32V)" "Stormy Blue (35J)" "Crystal White (34K)" "Brilliant Black (A3F)" "Zeal Red (41G)" "Jet Black (41W)" "Liquid Silver (38P)" "Meteor Gray (42A)"|-||-|||-||GEMAMISHPLRI|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Shift Plate Ring (m/t) 2006-2008|,|910-350|,|99.99|,|79.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Shift Plate Ring for a manual transmission comes in a Piano Black Finish. This adds a sleek accent for a sporty look on your Mazda MX-5.
|,|||-||GENUINE-MAZDA-VALVE-STEM-CAPS-IN-BLACK-SILVER-SET-OF-FOUR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 Miata OEM Valve Stem Caps in Black & Silver (set of four)|,|0000-83-Z50|,|25.95|,|22.55|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Valve Stem Caps in Black & Silver (set of four)
Genuine Mazda Valve Stem Caps in Black & Silver (set of four).Made from chrome plated finish ABS, our Valve Stem Caps have the Mazda logo beautifully printed under a clear doming to achieve a jewelry quality look and protect the logo for years to come. The caps contain an inner O ring seal that ensures a clean valve orifice and consistent tire pressure.
|,|||-||NE52-42-410B|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine Mazda MX-5 OEM Retractable Hard Top Fuel Door 2007-2015|,|NE52-42-410B|,|62.95|,|49.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 OEM Retractable Hard Top Fuel Door 2007-2015
|,|||-||GENUINE-MAZDA-OEM-BLACK-VALVE-STEM-CAPS-SET-OF-4-CAPS-2016|,|MAOEMWHAC|,|*CLEARANCE ITEM* Genuine Mazda OEM Black Valve Stem Caps (set of 4 caps) 1990-2019+|,|0000-83-Z38|,|39.95|,|22.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Black Valve Stem Caps (set of 4 caps) 1990-2019+
Mazda Black Valve Stem Caps (set of 4 caps). Valve Stem Caps have the Mazda logo beautifully printed under a clear doming to achieve a jewelry quality look and protect the logo for years to come.
|,|||-||GENUINE-MAZDA-OEM-SKYACTIV-TECHNOLOGY-OIL-FILTER-PACK-OF-5-5-WASHERS-AND-WRENCH|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda OEM SKYACTIVE TECHNOLOGY Oil Filter Pack of 5, 5 Washers and Wrench 2016-2019+|,|PKPE01|,|72.50|,|59.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM SKYACTIVE TECHNOLOGY Oil Filter Pack of 5, 5 Washers and Wrench 2016-2019+
Genuine Mazda with SKYACTIV® TECHNOLOGY Oil Filter Pack of 5, 5 washers and wrench. Change your oil and filter every 5,000 with Mazda Genuine oil filters.
|,|||-||GENUINE-MAZDA-OEM-SKYACTIV-TECHNOLOGY-OIL-FILTER-2016|,|MIATA-MAINTENANCE-2016-|,|*CLEARANCE ITEM* Genuine Mazda OEM SKYACTIV® TECHNOLOGY Oil Filter 2016-2019+|,|1WPE-14-302|,|13.85|,|11.09|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM SKYACTIV® TECHNOLOGY Oil Filter 2016-2019+
Genuine Mazda with SKYACTIV® TECHNOLOGY Oil Filter. Change your oil and filter every 5,000 with Mazda Genuine oil filters.
|,|||-||GENUINE-MAZDA-OIL-FILTER-DRAIN-PLUG-WASHER-NEW-LOWER-PRICE1|,|CLEARANCE|,|*CLEARANCE ITEM* Genuine Mazda Oil Filter & Drain Plug Washer New Lower Price|,|B6Y1-9956-41-|,|15.46|,|11.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Oil Filter & Drain Plug Washer New Lower Price
Genuine Mazda Oil Filter & Drain Plug Washer. A must when changing your Oil. Filter comes with Oil Drain Plug Washer.Genuine Mazda oil filter. Keep that Mazda running it's best. Please make note Mazda has changed the size of the filter (smaller). Better filteration. Need to change every 3,500 miles.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||GEOEMMAFRBUC|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Front Bumper Cover 1990-1997|,|OEM-NAY2-50-030|,|587.22|,|489.02|,||,||,|150.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover 1990-1997
*VIN Required
|,|"Freight Cost" "add(+$295)"|-||-|||-||GEOEMMAFRBUC2|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Front Bumper Cover 2001-2005|,|OEM-N0Y1-50-030A-BB|,|587.64|,|449.02|,||,||,|150.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover 2001-2005
#1 on this Diagram
*VIN Required
|,|"Freight Cost" "add(+$275)"|-||-|||-||GEOEMMAFRBUC4|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Front Bumper Cover 2006-2008|,|NEY3-50-03X|,|1,106.83|,|863.95|,||,||,|150.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover 2006-2008
*VIN Required
THIS PART FITS Base, Club Spec, Grand Touring, Sport, Touring, SV 2006-2008
|,|"Freight Cost" "add(+$295)"|-||-|||-||NHY2-50-03XH-BB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Front Bumper Cover 2009-2012|,|NHY2-50-03XH-BB|,|1,130.15|,|875.02|,||,||,||,||,||,||,|Genuine OEM Mazda Front Bumper Cover 2009-2012
*VIN Required
THIS PART FITS Grand Touring, Special Edition, Sport, Touring, SV 2009-2012
|,|"Freight cost" "add(+$295)"|-||-|||-||GENUINE-OEM-MAZDA-FRONT-BUMPER-COVER-2009-2013|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Front Bumper Cover 2013-2015|,|OEM-NPY2-50-03XC-BB|,|726.34|,|572.02|,||,||,||,||,||,||,|Genuine OEM Mazda Front Bumper Cover 2013-2015
*VIN Required
THIS PART FITS 25th Anniversary Edition, Club, Grand Touring, Sport 2013-2015
|,|"Freight Cost" "add(+$295)"|-||-|||-||GEOEMMAMIDOS|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Miata Door Speaker Cover 1990-1993|,|OEM-NA01-68-4W0-00|,|85.11|,|72.02|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Miata Door Speaker Cover 1990-1993
*Be sure to select the correct side for you specific year vehicle.
|,|"Select Side" "Select Here" "Driver add(+$20)" "Passenger"|-||-|"Select Color" "Black" "Tan Only Driver Side Left add(+$10)"|-||-|||-||GEOEMMAMI19W|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Miata Door Weather Stripping 1990-1997 |,|OEM-NA01-59-760J|,|189.23|,|149.98|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Miata Small Window Weather Stripping 1990-1997
*#10 in the diagram shown.
*Be sure to select which side before ordering.
|,|"Select Side" "Select Here" "Driver" "Passenger add(+$10) "|-||-|||-||GEOEMMAFRBUC1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Miata Front Bumper Cover 1999-2000|,|OEM-NCY1-50-030D-BB|,|533.77|,|432.02|,||,||,|150.000 |,||,||,||,|Genuine OEM Mazda Miata Front Bumper Cover 1999-2000
Please state your VIN number on the first page of check out in the section.
|,|"Freight Cost" "add(+$275)"|-||-|||-||GEOEMMAMIINH|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Miata Inside Handle Cover 1990-1997|,|OEM-NA01-58-303-00|,|14.38|,|11.02|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Miata Inside Handle Cover 1990-1997
*OEM item from Mazda, USA Corp.
|,|||-||GEOEMMAREBUC|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Miata Rear Bumper Cover 1990-1997|,|NAY1-50-220A-BB|,|553.94|,|469.02|,||,||,|150.000 |,||,||,||,|Genuine OEM Mazda Miata Rear Bumper Cover 1990-1997
*VIN Required
|,|"Freight Cost" "add(+$295)"|-||-|||-||GENUINE-OEM-MAZDA-MIATA-REAR-BUMPER-COVER-2006-2008|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Miata Rear Bumper Cover 2006-2008|,|NFY9-50-22XA-BB|,|832.95|,|629.95|,||,||,|150.000 |,||,||,||,|Genuine OEM Mazda Miata Rear Bumper Cover 2006-2008
*VIN Required
|,|"Freight Cost" "add(+$275)"|-||-|||-||NA01-58-651B|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Miata Small Window Weather Stripping 1990-2005|,|NA01-58-651B|,|87.13|,|74.02|,||,||,||,||,||,||,|Genuine OEM Mazda Miata Small Window Weather Stripping 1990-2005
#7 in Diagram
|,|"Select Side" "Select Here" "Driver's Side (NA01-59-651B)" "Passenger's Side (NA01-58-651B)|-||-|||-||OEM-NB-REAR-BUMPER|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Genuine OEM Mazda Rear Bumper Cover 1999-2005|,|OEM-NCY1-50-220G-BB|,|493.77|,|449.02|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Rear Bumper Cover 1999-2005
*VIN Required at checkout
|,|"Freight Cost" "Add (+$275)"|-||-|||-||CLEARANCE-ITEM-ISOTTA-SHIFT-KNOB-COVER-LEVER-CHROME-ALUMINUM|,||,|*CLEARANCE ITEM* ISOTTA Shift Knob Cover Lever - Chrome Aluminum|,|clearance-item-isotta-shift-knob-cover-lever-chrome-aluminum|,|26.25|,|22.31|,||,||,|0.000 |,||,||,||,|*CLEARANCE ITEM* ISOTTA Shift Knob Cover Lever - Chrome Aluminum
ISOTTA Shift Knob Cover Lever - Chrome Aluminum - Part # 499 L
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This shift knob cover lever also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Fits ISOTTA MANGUSTA, ERG, DROP, GARA, VIPER, and PUMA Shift Knobs.
• 52 mm (2.05 inches) tall.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter. Contact us to verify fit.
Quantity 1 Shifter Knob Cover Lever
Color - Finish Chrome Aluminum
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||KAT-CLEARANCE|,|CLEARANCE|,|*CLEARANCE ITEM* Katzkin Premium Italian Leather Miata Seat Upholstery - One Tone Brown (Dark Red) Color 1999-2000|,|kat-clearance|,|1,099.99|,|599.95|,||,||,||,||,||,||,|Katzkin Premium Italian Leather Miata Seat Upholstery - One Tone Brown (Dark Red) Color 1999-2000
There Katzkin Premium Italian Leather is nothing like the look and feel of leather for your Mazda Miata. These premium leather seat skins are made of the finest glove soft Italian leather. Make sure to scroll down to see more pictures of our customers' seats and the options available. Also available with SUEDEZKIN Synthetic Suede Inserts! Call for details.
|,|||-||KEEAUTOPMXMI1|,|SHOP-BY-SALE|,|*CLEARANCE ITEM* Kee Auto Top MX-5 Miata Convertible - Cabrio Economy One Plastic Window 1990-2005 - Sale |,|KEE-CF4076WC|,|869.00|,|419.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - Cabrio Economy One Plastic Window
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the plastic is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, a feature that some other manufacturers don't offer.
Kee Auto Cabrio Economy Top with 1 plastic window that has heat-sealed detail and original style prepunched retainer pieces.
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan (Original Color 15CB)"|-||-|||-||KEEAUTOPMXMI3|,|SHOP-BY-SALE|,|*CLEARANCE ITEM* Kee Auto Top MX-5 Miata Convertible - Cabrio Economy Three Plastic Window 1990-2005 - Sale |,|KEE-CF4095WC|,|1,102.00|,|572.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - Cabrio Economy Three Plastic Windows
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the glass is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, a feature that some other manufacturers don't offer.
Kee Auto Cabrio Economy Top with 3 plastic windows heat-sealed into top (no separate zippered window) and original style prepunched retainer pieces.
*(product not shown in picture)*
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan(Original Tan 15CB)"|-||-|||-||CI-KEES-NA-CONVERTIBLE-CF4107DF11CB|,||,|*CLEARANCE ITEM* Kee Auto Top MX-5 Miata Convertible - StayFast Tinted Defroster Glass Window with Zipper with Rain Rail 1990-1997|,|ci-kees-na-convertible-cf4107df11cb|,|1,119.00|,|649.99|,||,||,|0.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - StayFast with Tinted Defroster Glass Window with Zipper with Rain Rail with Tension Springs 1990-1997
*Only 1 available at this price, final sale
*Part# CF4107DF11CB
*Local Pick Up available in Irvine, CA
This is the top-of-the-line non-original glass top for the 1990-1997 Miatas. It has the rear tinted glass window with the zipper for ease of use along with the defroster! Don't mess with the rest, go with the best with this top.
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Kee Auto StayFast Top with tinted glass DEFROSTER window (zip down with single pull ring) and original style prepunched retainer pieces. (wiring may be necessary) Only Available in Black.
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996 and 1997
|,|||-||KGWOMITRSP19|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* KG Works Miata Trunk Spoiler 1990-1997 - Sale!|,|KGW-NA0074C2XXX|,|189.09|,|159.99|,||,||,|0.000 |,||,||,||,|KG Works Miata Trunk Spoiler 1990-1997
The KG Works Miata NA Spoiler is now more affordable. Previously this item has sold for $350.00 but due to popular demand we have been able to secure better pricing on this item.
The KG Works Trunk Spoiler is the perfect "medium" for the Miata trunk. The smaller spoiler is too, well, small. The larger "whale tail" spoiler is too big and looks out of place on anything but a 747.
This spoiler creates a more aggressive look without looking out of place and will totally transform your ride. The attention to the styling details shows with perfect fitment around the third brake light as well as places for you to install decorative rivet heads to give it an added flare without causing irreparable damage to your trunk.
Features
Exact design for the perfect fit
|,|||-||KONADSHOCAB8|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|*CLEARANCE ITEM* Koni Adjustable Miata Shock 1990-1997 - Sale! |,|304-203|,|288.00|,|159.95|,||,||,|5.000 |,||,|sdfhsdh|,||,|Konis are an excellent choice of shock absorber for both street and high performance driving applications such as autocross. Our Koni shock absorbers can be adjusted for height, from stock to about 3/4" lower, and can also be adjusted for stiffness from "soft" which provides a near stock ride quality to "firm" which is exactly that. You can also adjust them to anywhere in between.
KONI street shocks carry a lifetime warranty to the original purchaser for as long as you own the vehicle.
Price is per shock. Update the quantity in your cart to 2 for a pair. If you want a full set, order 2 front and 2 rear.
|,|"Select" "Front Shock add(+$20)" "Rear Shock"|-||-|||-||GOMILOWPRREB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Low Profile Replacement Lens and Bulbs|,|BSP-530|,|125.99|,|94.02|,||,||,|0.000 |,||,||,||,|Low Profile Replacement Lens and Bulbs
These are the replacement lenses for the Low Profile Headlight Kit. Includes (1) lens and (1) bulb.
|,|||-||MAEM|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MAZDASPEED MX-5 Miata Trunk & Side Fender Emblem|,|907-755|,|39.99|,|19.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Mazdaspeed Emblem. Just sticks on with 2 sided tape.
|,|"Select Emblem" "Select Here" "Mazdaspeed Emblem" "MS Emblem" "Both Emblems add(+$19.95)"|-||-|||-||MI7COLEDUNKI|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata 7 Color LED Undercar kit 4pc Multi Pattern Lights with Remote Control|,|PSL-7COLORUNDERCARLED|,|399.99|,|159.95|,||,||,|0.000 |,||,||,||,|Mazda Miata 7 Color LED Undercar kit 4pc Multi Pattern Lights with Remote Control
This kit is brand new and out shines all others. This is the upgraded model, that stands out from all other.
This is the kit that won all the awards at the National Import Auto Show in San Diego, and it can be yours today!!
7 COLOR LED KIT: YES, YOU GET IT ALL EVERYTHING YOU NEED
* Remote control and control box is included!!!
* 2 36" LED tubes with built in transformers
* 2 48" LED tubes with built in transformers
* 7 Pattern changing kit
* You can switch, Red, Green, Pink, Blue, Yellow, White, and Purple.
* 16 Functions
* 54 Patterns
* All the hardware wiring, and necessary components
More durable than traditional neon kits.
Installation is as easy as it gets, the kit comes complete with detailed instructions, each tube is made of Lexan for maximum shock resistance.
|,|||-||908-140|,|NEW|,|*CLEARANCE ITEM* Mazda Miata Aluminum Radiators by Cobalt 1990-2005 - Sale! |,|908-140|,|355.02|,|269.98|,||,||,||,||,||,||,|Mazda Miata Aluminum Radiators by Cobalt 1990-2005
Get every ounce of cooling efficiency from our brand new aluminum radiator by Cobalt! Unlike the plastic-tanked stock radiators which would leak, crack or get clogged up over time, this aluminum radiator has a long life and will perfectly replace the factory unit to keep your cooling system in top notch shape!
Manufactured by Cobalt employing the highest standards of quality control, this radiator is the best merger of design and performance. The fins balance the thickness and surface area of the radiator allowing excellent air circulation throughout. An aluminum strip attached along its top edge covers the space between the radiator and fan, trapping the air for maximized cooling effect. Designed to work well with the OE fan, this bolt-on radiator simply drops in for a proper fit offering easy installation. No cutting, bending or modifications required! Intended for manual transmission only. Application specific for your NA and NB. Give your Miata the benefit of a Cobalt radiator!
|,|"Select Year" "Select Here" "1990-1997 Manual Transmission" "1999-2005 Manual Transmission"|-||-|||-||CI-BOSS-FROG-STRAIGHT-CAT-90-93|,||,|*CLEARANCE ITEM* Mazda Miata Boss Frog Straight Cat 1990-1993|,|ci-boss-frog-straight-cat-90-93|,|99.99|,|49.99|,||,||,|0.000 |,||,||,||,|*Only 1 available at this price, final sale
*Used part return
*2 1/2 inch Inlet & Outlet
*Comes with bolts
*Local Pick Up available in Irvine, CA
The Boss Frog "Straight Cat" is a great alternative to knocking the center out of your stock catalytic converter, or buying an expensive high-flow model. If you are still using your stock (or slightly modified) catalytic converter, consider the NEW Straight Cat.
The Boss Frog "Straight Cat" is an unrestricted 2-1/2" stainless pipe coupled with two heavy duty flanges that bolt right up to your exhaust in place of the stock cat.
If you have an aftermarket exhaust, the Straight Cat will take some of the "rattle" out of the sound, bringing out more of the growl sound that you paid for.
Not CARB approved and never will be in CA, Legal for Offroad Race Vehicles Only. YES, this will bolt up to anything your stock cat bolts up to, that includes stock exhaust and stock header and any of the aftermarket headers or exhausts we sell.
|,|||-||MAZDA-MIATA-CARBON-FIBER-FENDER-FLARE-1990-1997|,|NAEXAC|,|*CLEARANCE ITEM* Mazda Miata Carbon Fiber Fender Flares 1990-1997 - Sale!|,|MIA02|,|599.99|,|329.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Carbon Fiber Fender Flares 1990-1997
Sold as 4 Pieces (1 Set)
Made with real 2x2 Carbon Fiber.
Clear Coated for UV Protection and Long Lasting Shine.
This Carbon Fiber is the most used in the Automotive Field.
May require modification or cutting. You may need OEM Hardware and/or 3M double sided tape to install.
Can be made in Kevlar Carbon Fiber at an addition fee.
International buyers email us for shipping quotes.
|,|"Shipping Cost" "add(+$65)"|-||-|||-||90MAMITALI|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Chrome Tail Lights 1990-1997|,|LT-MIA90-KS|,|149.00|,|119.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Chrome Tail Lights 1990-1997
Why buy tail lights?
We sell factory style replacement tail lights, and custom tail lights. Custom tail lights are a great way to modify the appearance of your car. Compared to other styling modifications, custom tail lights are relatively inexpensive and extremely easy to install. Most cars have a variety of custom tail lights available, including those with chrome, smoke and carbon fiber housings. The latest trend in the tail light market is LED tail lights, where a 'sea of little bulbs' lights up every time you brake. The lens patterns available also vary for custom tail lights, so check our product listings for details. If you want to give your car a modern, customized look, buying custom tail lights should be one of the first things you do.
Is there any difference between Altezza tail lights, Euro tail lights, or clear tail lights?
Altezza tail lights, euro tail lights and clear tail lights are terms that mean the exact same thing.
Do tail lights come in pairs?
All taillights we carry are always sold in pairs, unless otherwise noted in the listing on our website.
What exactly do the tail lights come with?
All the taillights we sell are complete. When you receive them in the mail from us, you take them out of the box, plug them in to your factory tail light harness, and you can immediately turn on the new taillights. Tail lights are certainly plug and play products.
How do you install tail lights?
Tail lights are manufactured to exact OEM specifications for easy installation, so you simply remove your factory tail lights and bolt in your new set. Basic hand tools are required and installation can be completed in a matter of minutes.
|,|||-||MAMICLSIMASE|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Clear Side Markers Set of Two 1990-2005|,|NA00881090|,|49.99|,|40.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Clear Side Markers Set of Two 1990-2005
Replace your factory side markers with these stylish European Clear Markers. Comes complete and easy-to-read instructions.
1990-1997 These fit front and rear; 1999-2005 These fit front only.
Sold as a pair.
|,|||-||MAMICRCLTUSI|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Crystal Clear Turn Signals 1990-1997|,|905-285|,|179.99|,|159.90|,||,||,|0.000 |,||,||,||,|Mazda Miata Crystal Clear Turn Signals 1990-1997
These are complete replacement units with crystal clear lenses.
* Easy plug-n-plug unit.
* They are delivered with two-phase amber bulbs so they are street legal.
* Awesome styling paired with high-quality manufacture, these clear lenses are perfect for your Miata!
|,|||-||GARAGE-STAR-DELRIN-DOOR-BUSHINGS|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda Miata Delrin Door Bushings 1990-2018+|,|MS-910-803|,|59.22|,|48.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Delrin Door Bushings 1990-2018+
Replace your old worn rubber bushings with these Miata Delrin door bushings. These Miata Delrin door bushings will help with chassis rigidity.
Fits 1990-2018+ Miata/MX-5
Each order comes with 2 door bushings and mounting hardware
|,|||-||CLDOSP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Door Speakers 1990-1997|,|425-202|,|199.99|,|115.95|,||,||,|0.000 |,||,|fghdfhfdassad|,||,|Mazda Miata Door Speakers 1990-1997
This speaker package includes 1 pair of Harmony Speakers that are the same size as the advertised factory fit location however creating new mounting holes may be required in some cases.
Note - Cutting or Splicing into the factory speaker wire harness is required.
This Package Includes the Following Items:
- 1 x Harmony Audio HA-65 Car Stereo Rhythm Series 6.5" Replacement 300W Speakers & Grills
Harmony Audio HA-65 Car Stereo Rhythm Series 6.5" Replacement 300W Speakers & Grills:
Specifications:
- 6-1/2" Rhythm Series 2-Way Car Speaker Pair
- Power Handling
- Peak: 300 watts
- RMS: 100 watts
- Sensitivity: 90dB
- Frequency Response: 40Hz-20kHz
- Mounting Depth: 2 3/8"
- Mounting Cutout Diameter: 5 11/16"
- Tweeter Size: 1/2"
- Single 4 Ohm
Features:
- Direct Fit OEM Replacement Size
- Polypropylene Injection Molded Cone
- Butyl Rubber Surround
- PEI Neodymium Magnet Dome Tweeter
- Passive Tweeter Crossover
- Steel Basket
- Ferrite Magnet
- Kapton Former Material
Price is for the pair.
|,|||-||MAZDA-MIATA-DURAFLEX-BOMBER-FRONT-BUMPER-COVER-1-PIECE-19990-2005|,|NBBODYSTYLING|,|*CLEARANCE ITEM* Mazda Miata Duraflex Bomber Front Bumper Cover - 1 Piece 1999-2000 - Sale! |,|102015|,|429.99|,|322.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Bomber Front Bumper Cover - 1 Piece 1999-2000
1998-2005 Mazda Miata Duraflex Bomber Front Bumper Cover - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
Note: 01-05 medels will require modification to headlight area for proper fit.
Fits the following models: Fits All Models, Base Model, LS, Mazdaspeed
|,|"Freight Cost" "add(+$295)"|-||-|||-||MAZDA-MIATA-2DR-BALLISTIX-REAR-LIP-1999-2003|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Duraflex RBS Wing Spoiler 1999-2005|,|114352|,|335.00|,|226.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex RBS Wing Spoiler 1999-2005
-Hand laid, high quality 6 oz. fiberglass
-Signature black finish
-High quality weather resistant aluminum mesh grille (where applicable)
-Proprietary polymer blend for maximum flexibility
-Increased durability and longer service life
-Reduced damage rate up to 75%
|,|||-||DGM-FENDER-FLARES-NC|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Duraflex Super20 Fender Flares 2006-2015 - Sale! |,|113825|,|540.00|,|409.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Super20 Fender Flares 2006-2015
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%!
|,|||-||MAZDA-MIATA-FIBER-GLASS-FENDER-FLARE-1990-1997|,|NAEXAC|,|*CLEARANCE ITEM* Mazda Miata Fiber Glass Fender Flares 1990-1997 - Sale! |,|MIA01|,|299.99|,|239.02|,||,||,|5.000 |,||,||,||,|Mazda Miata Fiber Glass Fender Flares 1990-1997
Sold as 4 Pieces (1 Set)
Black gel coated for a smooth finish touch.
All Fiber Glass parts are paintable.
Can be made in Black or White fiber glass.
You may need OEM hardward and/or 3M double sided tape to install. These flares may require cutting or modifcations.
Serves Automotives that are show or race worthy.
|,|"Fiber Glass Color" "Black" "White"|-||-|"Shipping Cost" "add(+$75)"|-||-|||-||GEMAMIFUPRRE1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Fuel Pressure Regulator 1990-1993|,|909-7465|,|174.29|,|129.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Fuel Pressure Regulator 1990-1993
Replacement for Original (OE) Manufacturer Part # B61P13280
|,|||-||GV-CARBON-CONSOLE-COVER|,|NBINVIALL|,|*CLEARANCE ITEM* Mazda Miata Garage Vary Carbon Console Cover 1990-1993|,|gv-carbon-console-cover|,|225.00|,|194.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Carbon Console Cover 1990-2005
*Availability: Ships in 5-10 business days
Product made by Garage Vary. These CF console covers will add a great touch to your interior.
• Looks great
• Perfect fit
• Lightweight
• ONLY available for NA Miata (1989-1997) & NB Miata (1998-2005)
|,|"Year" "1990-1993" "1999-2000" "2001-2005"|-||-|||-||CLHESP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Headrest Speakers 1990-1997 - Sale! |,|425-101|,|199.99|,|139.00|,||,||,|0.000 |,||,|aghafg|,||,|Mazda Miata Headrest Speakers 1990-1997 - Sale!
This speaker package includes 2 pair of Harmony Speakers that are the same size as the advertised factory fit location however creating new mounting holes may be required in some cases.
Note - Cutting or Splicing into the factory speaker wire harness is required.
This Package Includes the Following Items:
- 2 x Harmony Audio HA-R35 Car Stereo Rhythm Series 3.5" Replacement 90W Speakers
Harmony Audio HA-R35 Car Stereo Rhythm Series 3.5" Replacement 90W Speakers:
Specifications:
- 3-1/2" Rhythm Series 2-Way Car Speaker Pair
- Power Handling
- Peak: 90 watts
- RMS: 30 watts
- Sensitivity: 88dB
- Frequency Response: 85Hz-20kHz
- Mounting Depth: 1 5/8"
- Mounting Cutout Diameter: 3 1/16"
- Tweeter Size: 1/2"
- Single 4 Ohm
Features:
- Direct Fit OEM Replacement Size
- Polypropylene Injection Molded Cone
- Butyl Rubber Surround
- PEI Neodymium Magnet Dome Tweeter
- Passive Tweeter Crossover
- Steel Basket
- Ferrite Magnet
- Kapton Former Material
THIS IS A COMPLETE SET OF 4 HEADREST SPEAKERS!
|,|||-||CI-MAG-23771-MIATA-99-00-AUTO-CAT|,||,|*CLEARANCE ITEM* Mazda Miata High Flow Catalytic Converter by MagnaFlow 1999-2000 (Automatic)|,|ci-mag-23771-miata-99-00-auto-cat|,|437.35|,|134.99|,||,||,|0.000 |,||,||,||,|*Only 1 available at this price, final sale
*Not California CARB approved.
**Not direct bolt-in, one end requires welding. See Picture Shown
* For Mazda Miata with Automatic Transmission for Year 1999 and 2000
*Local Pick Up available in Irvine, CA
MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
|,|||-||LEATPADAR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Leather Armrest Pad 1990-2005|,|402-110|,|45.99|,|34.98|,||,||,|0.000 |,||,|sdghgfh|,||,|Mazda Miata Leather Armrest Pad 1990-2005
Tired of resting your elbows on that hard center console cover? Our custom made Italian leather padded armrest attaches securely and easily to the console lid with inculded velcro strips and provides you with much greater comfort. Installs in seconds! Your elbows will thank you!
Custom fitted for the various year Miatas. Now also available in optional Bisque color leather for the 01-05!
*This is not the console lid.
|,|"Select Year" "Click Here" "1990-1997 Black" "1999-2000 Black add(+$10)" "1999-2000 Bisque add(+$15)" "2001-2005 Black" "2001-2005 Bisque add(+$15)"|-||-|||-||GARAGE-STAR-SHIFT-EXTENDER|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Manual Billet 3" Shifter Extender 10x1.25|,|130518-3|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Shifter Extender
Thread pitch is 10 x 1.25
(Fits most Mazda, Nissan, Honda, Infinity and Mitsubishi applications)
Very easy to install
Comes in 3 inch lengths
FITs: Mazda Miata , NA 90-97 - Engine, NA 90-97 - Interior, NA Miata, NB 99-05 - Engine, NB 99-05 - Interior, NB Miata, NC, ND 2016 - Present
|,|||-||MAZDA-MX-5-MIATA-ZOOM-BACK-POCKET|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda Miata Miata Custom Organizer Pouch Back Pocket 1990-2005|,|mazda-mx-5-miata-zoom-back-pocket|,|139.99|,|104.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Miata Custom Organizer Pouch Back Pocket 1990-2005
Miata Accessory Caddy organizer that snaps into the existing snaps on your NA or NB model Miata. These 3-pocket pouches are the perfect answer to keeping your knick knacks from rolling all over the floor or stuffed behind the seats.
|,|"Select Color" "Select Here" "Black" "Tan" "Red"|-||-|"Select Text Color" "Red" "Blue"|-||-|||-||CI-MAMIDBA40SE6|,||,|*CLEARANCE ITEM* Mazda Miata MX-5 Brake Rotor - DBA 4000 Series 6x6 Wiper-Slot Brake Rotor - 2001-2005 Rear Left and Right w/Sport Suspension|,|DBA-4546SL-SR|,|325.99|,|259.99|,||,||,||,||,||,||,|DBA's, Disk Brak Australia Mazda Miata 4000 series rotor features Thermal Stability Profiling for improved heat handling and Thermo-Graphic paint markings for effective heat monitoring.
The unique 6x6 Wiper Slot design provides extreme stopping power on the road or the track.
Price is for one rotor and the 2001-2005 sport rotor fits the 2004-2005 mazdaspeed Miata.
As with every DBA rotor, the 4000 Series rotor bolts right onto the vehicle with no mechanical changes needed. DBA's enhanced-performance, slotted rotor features Thermal Stability Profiling (TSP) for improved heat handling and Thermo-Graphic paint markings for effective heat monitoring.
Thermo-Graphic markings are placed on the outer edge of each DBA 4000 series disc rotors and are used to monitor the core temperatures achieved during braking application. The markings change color as the rotor heats up to alert the driver to rotor temperatures that exceed optimum levels.
The ''Kangaroo Paw'' design features a series of 144 diamond- and tear drop-shaped pillars and columns individually spaced between the rotor faces. This system provides two key advantages. First, is the ability to cool the rotor faster than ever before. As the disc rotor rotates, aerodynamic turbulence around the individual pillars and columns is generated, increasing the force of hot air out from within the internal areas of the rotor. Second is increased dimensional stability across the disc rotor directly achieved by the individually spaced pillars and columns.
These advantages increase the disc rotor's efficiency by as much as 20% when compared to conventional rotor designs. A 20% increase in disc rotor efficiency directly translates to reduced brake operating temperatures, brake fade, disc rotor stresses, disc thickness variation, run-out and shudder. All 4000 series rotors also benefit from DBA's "Longlife Slotted" design. The rotors are manufactured to QS-9000 quality standards using premium grade materials with a high iron content and dense metal matrix resulting in long wear and safe, consistent stopping power.
Front
Rear
|,|||-||MESH-POCKET|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 Car Storage Net Bag Phone, Mesh Pocket Organizer & Rear Seat Luggage Net|,|MP-ALI|,|22.85|,|13.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Car Storage Net Bag Mesh Pocket Organizer
Phone & Mesh Pocket Organizer - First, Third Pictures
Rear Seat Luggage Net - Second, Forth Pictures.
|,|"Select Option" "Select Here" "Phone Pocket Organizer" "Rear Seat Luggage Net" "I Want Both add(+$13.95)|-||-|||-||MAMIMXCHMSCB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 Chrome Replica M Script Badge|,|MOS-916-049|,|54.95|,|49.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Chrome Replica M Script Badge
Made from billet aluminum and then chromed to a high lustre finish. Easily installs with 3M adhesive.
Smaller than original size badge.
The dimensions of this badge is 1" x 3".
|,|||-||AL-KNEE|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 Comfortable Leg Cushion Knee Pad|,|al-knee|,|54.45|,|32.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Comfortable Leg Cushion Knee Pad
Material: Fur + PU leather
Description：
Seat Gap Storage Box is made of durable fur + leather, which highly impacts resistant. So it won't crack, slide, bend, or leave any scratches. Seat Gap Filler Add extra space to your vehicle interior for your cell phone, keys, coins, and other small items. Reserve a hole for the charging cable
|,|"Select Color" "Select Here" "Red-white" "Red" "Black-red" "Black-white"|-||-|||-||MAMIMXCOFLSH1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 CoverCraft Flex Shade™ SunScreen 1999-2019+|,|CVC-UR10688|,|75.95|,|62.45|,||,||,|0.000 |,||,||,||,|High-performance radiant barrier material uses laminate construction with insulating foam and a clear mylar film on the inside. The side that faces the outside uses a metalized polyester laminate finish to reflect up to 97% of the sun's damaging UV rays.
Easy to use - just roll the shield into place and lower the sun visors. Lightweight material is easy to handle.
|,|"Select Year" "Select Here" "1999-2005 (UR10688)" "2006-2015 (UR10968)" "2016-2019+ (UR11423)"|-||-|"Select Color" "Select Here" "Silver" "Blue Metallic (BL)" "Gold (GD)" "Green Ice (GN)" "Rose (RO)"|-||-|||-||MAMIMXCOUVHE|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 CoverCraft UVS100 Heat Shield 1990-2019|,|CVC-UV10246|,|95.95|,|79.02|,||,||,|0.000 |,||,||,||,|This premium quality, custom patterned, folding heat shield has a silver reflective fabric on the outer side, soft felt on the inside. Both fabrics are laminated to a foam-core board which acts as an insulator. The silver outside facing fabric helps reflect damaging UV rays that not only heat the inside of your vehicle but also damage the interior. Your steering wheel and seats will be cooler with the use of a Heat Shield!
Easy to use - just unfold and position across the windshield surface, then fold the sun visors down to hold the shield in place.
|,|"Select Year" "Select Here" "1990-1997 (UV10246)" "1999-2005 (UV10688)" "2006-2015 (UV10968)" "2016-2019+ (UV11423)"|-||-|"Select Color" "Select Here" "Silver" "Blue Metallic (BL)"|-||-|||-||MAMITOGPOFRL|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 GV Style Polyurethane Front Lip 2001-2005|,|GS-LIP-NB001|,|309.00|,|135.95|,||,||,|5.000 |,||,||,||,|Mazda Miata MX-5 GV Style Polyurethane Front Lip 2001-2005
* Durable Polyurethane
* Prefect Fitment
* Including Installation Hardware
* Required painting and installation (or just use it as is!)
* Note: Does Not fit 2004-2005 Miata Mazdaspeed
|,|"Handling fee" "add(+$9.00)"|-||-|||-||GV-TYPE-2-STYLE|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 GV Type 2 Style Front Bumper Lip Spoiler 1990-1997|,|Gv-Type-2-Style|,|239.95|,|159.45|,||,||,||,||,||,||,|Mazda Miata MX-5 GV Type 2 Style Front Bumper Lip Spoiler 1990-1997
Put a popular and sporty look on your Miata without fearing driveways! Our lip spoiler is made from strong and durable polyurethane, unlike others that are made from fragile fiberglass. Comes ready to paint or leave black as an accent.
- Replica of Garage Vary Type 2 Style
- Durable Polyurethane
- Prefect Fitment
- Including Installation Hardware
|,|"Handling fee" "add(+$9.00)"|-||-|||-||NA01-R1-863|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 Hard Top Lock Plate 1990-2005|,|NA01-R1-863|,|26.99|,|19.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Hard Top Lock Plate 1990-2005
Positions: Driver, Passenger
Manufacturer: Genuine Mazda Original Parts
|,|||-||BSPLOWPRHEKI|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|*CLEARANCE ITEM* Mazda Miata MX-5 LHD Low Profile Headlights Kit Plug & Play 1990-1997 - Sale! |,|BSP-527|,|499.95|,|389.02|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 LHD Low Profile Headlights Kit Plug & Play 1990-1997
Are you tired of the big goofy looking barn door headlights on your Mazda Miata? These Go Miata Low Profile Headlight Kit is what you Need, to give you the look that will make others look twice at your Miata.
Ready-made plug&play kit for the installation of low profile headlights on your Miata, headlights are certified to be used on public roads, whole kit is made on cnc machines and powder coated,
This kit includes everything you need to fit it into car
INCLUDED:
-Headlights
-Mounting plates
-Screws
-Adjustable tie rods for motor mounting
-Mounting instructions
|,|||-||N2Y1-50-03X-BB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 OEM Bumper Cover 2016+|,|N2Y1-50-03X-BB|,|738.95|,|614.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Bumper Cover 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Shipping & Handling fee" "add(+$239)"|-||-|||-||NC10-68-D81-02|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 OEM Door Pull Handle 1999-2005|,|NC10-68-D81-02|,|91.95|,|79.98|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Door Pull Handle 1999-2005
|,|"Select Year" "Select Here" "1999-2000 Driver Side - Black" "1999-2000 Passenger Side - Black" "1999-2000 Driver Side - Tan" "1999-2000 Passenger Side - Tan" " " "2001-2005 Passenger Side - Black" "2001-2005 Passenger Side - Beige"|-||-|||-||N243-56-13ZA|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 OEM FENDER FRONT SHIELD 2016+|,|N243-56-13ZA|,|79.78|,|66.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM FENDER FRONT SHIELD 2016+
Manufacturer: Genuine Mazda Original Parts
#5 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver's Side add(+$14)" "Passenger's Side"|-||-|||-||N243-51-9H1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 OEM Front Air Dam Skirt Deflector 2016+ |,|N243-51-9H1-N243-51-9L1|,|115.57|,|92.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Front Air Dam Skirt 2016+
#9, 10 IN ILLUSTRATION
#12 Deflector Rivet
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$92.02)"|-||-|"Do you want Qty 4 of Deflector Rivet" "Select Here" "Yes add(+$22)"|-||-|||-||N12158410C97|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 OEM Outside Door Handle 2006-2015|,|OEM-N121|,|149.55|,|122.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Outside Door Handle 2006-2015
Please provide VIN# and Color Code!
PART IS #1 IN SECOND ILLUSTRATION
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|"Select Option" "Select Here" "Without Keyless Entry" "With Keyless Entry add(+$75)" "With Keyless with Smart Key add(+$95)"|-||-|"Select Color" "Select Here" "2006-2011:" "Aluminum add(+$10)" "Brilliant Black" "Marble White" "Copper Red" "True Red" "Winning Blue add(+$10)" "Galaxy Gray" "Metro Gray" " " "2012-2015:"
"Sparkling Black" "Yellow" "Dolphin Gray" "Velocity Red" "Crystal White" "Metro Gray" "Aluminum"|-||-|||-||NAY2-50-22XC-BB|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 OEM Rear Bumper Cover 2016+|,|NAY2-50-22XC-BB|,|592.95|,|522.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Rear Bumper Cover 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Freight & Handling fee" "add(+$249)"|-||-|||-||N243-51-130D|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 OEM SIDE Marker Lamp 2016+|,|N243-51-130D|,|64.28|,|49.99|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM SIDE Marker Lamp 2016+
#1 IN ILLUSTRATION
Driver's Side - N243-51-130D
Passenger's Side - N243-51-120D
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$49.99)"|-||-|||-||NE51-69-270D-02|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 OEM Sun Visor 2006-2015|,|NE51-69-270D-02|,|98.40|,|81.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Sun Visor 2006-2015
SKU:
Passenger's Side:
Without garage door opener: NE51-69-270D-02
With garage door opener: NH18-69-270A-02
Driver's Side:
Without garage door opener: NE51-69-320D-02
With garage door opener: NH18-69-320A-02
|,|"Select Position" "Select Here" "Passenger's Side - Without garage door opener" "Driver's Side - Without garage door opener add(+$5)" " " "Passenger's Side - With garage door opener add(+$20)" "Driver's Side - With garage door opener add(+$60)"|-||-|||-||NA1-301044|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda Miata MX-5 Quilted Door Panel Set Left & Right Fits 1990-1997|,|NA1-301044|,|429.00|,|199.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Quilted Door Panel Set Left & Right Fits 1990-1997
Many door cards / panels have minor damage and need a refresh / restoration after all these years of service. A replacement with the OEM part is very costly.
|,|"Select Color" "Select Here" "Black" "Black with Red Stitching" "Saddle Brown with Beige Stitching" "Red" "Blue" "Green" "Yellow" "Tan" "Bisque" "Grey" "Carmel"|-||-|||-||405-400|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda Miata MX-5 Seat Designs Seat Covers - HAWAIIAN PATTERN FABRIC 1990-2015 - SALE |,|405-400-hawaiian|,|220.95|,|199.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Seat Designs Seat Covers - *HAWAIIAN PATTERN FABRIC 1990-2015*
Whether you want to protect new seats or cover older ones, our Miata Seat Covers will guard against wear and tear while keeping your Miata seats cooler in summer and warmer in winter!
These are not your standard one-size fits all seat covers. These are made especially for us, patterned after the miata seats and made to fit very well. Precision patterns and the finest materials are used to ensure a premium look. All materials also feature a durable foam backing.
|,|"What Year is Your Miata" "Select Year" "1990-1992" "1993-1995" "1996-1998" "1999-2000" "2001-2005 add(+$5.00)" "2006-2007 add(+$5.00)" "2008 add(+$5.00)" "2009-2010 add(+$5.00)" "2011-2015 add(+$5.00)"|-||-|"Select Color" "Select Color" "2-Tone Hibiscus Blue" "2-Tone Hibiscus Pink" "2-Tone Hibiscus Red" "2-Tone Surf City Black" "2-Tone Turtle Beach Charcoal" "2-Tone Surf City Green" "2-Tone Surf City Blue" "Hibiscus Blue" "Hibiscus Pink" "Hibiscus Red" "Surf City Green" "Surf City Black" "Surf City Blue" "Turtle Beach Charcoal"|-||-|||-||MICLSECOCUFI|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda Miata MX-5 Seat Designs Seat Covers 1990-2015 - SALE |,|405-400|,|199.95|,|178.95|,||,||,|0.000 |,||,|asdfasf|,||,|Seat Designs Miata Seat Covers 1990-2015
Whether you want to protect new seats or cover older ones, our Miata Seat Covers will guard against wear and tear while keeping your Miata seats cooler in summer and warmer in winter!
These are not your standard one-size fits all seat covers. These are made especially for us, patterned after the miata seats and made to fit very well. Precision patterns and the finest materials are used to ensure a premium look. All materials also feature a durable foam backing.
Available in 9 different Styles! Price is for the pair.
Regal- Soft velour with a distinctive OEM pin-dot pattern. Looks & feels like factory seats. Classic finish for an upscale look.
Tweed (Pictured above)- Durable, sturdy fabric. Outstanding fit and finish.
Neo Supreme- Water resistant fabric. Bright vibrant colors. Soft comfort.
Regal
Tweed
Neo Supreme
Please allow 1-2 weeks for production as these are custom made. Since these are custom made to your order and are shipped directly from the manufacture, they are non-returnable & non-refundable unless the product arrives defective or there was an error on our part.
|,|"What Year is Your Miata" "Select Year" "1990-1992" "1993-1995" "1996-1998" " " "1999-2000" "2001-2005 add(+$12)" " " "2006-2008 add(+$12)" "2009-2010 add(+$12)" "2011-2015 add(+$12)"|-||-|"Seats Color" "Select Color" "Plush Regal - Black (BK)" "Plush Regal - Tan (TN)" "Plush Regal - Light Grey, Silver (SV)" "Plush Regal - Burgundy (BY)" "Plush Regal - Med Blue (MB)" " " "Tweed - Black (BK)" "Tweed - Maroon (MN)" "Tweed - Grey (GY)" "Tweed - Dark Blue (DB)" "Tweed - Charcoal" "Tweed - Brown (BN)" "Tweed - Tan" "Tweed - Toast" " " "Sierra - Black" "Sierra - DK-Blue" "Sierra - Green" "Sierra - Grey" "Sierra - Maroon" "Sierra - Taupe" "Sierra - Tan" " " "Scottsdale - Black" "Scottsdale - Charcoal" "Scottsdale - Ocean-Blue" "Scottsdale - Sandstone" "Scottsdale - Silver" "Scottsdale - Toast" " " "Allure - Black" "Allure - Charcoal" "Allure - Silver" "Allure - Toast" " " "Madera - Charcoal" "Madera - Toast" "Madera - Silver" "Madera - Sandstone" " " "Dorchester Velour - Black" "Dorchester Velour - Charcoal" "Dorchester Velour - Toast" "Dorchester Velour - Sandstone" "Dorchester Velour - Grey" " " "Neo Supreme - Charcoal (CH) add(+$35)" "Neo Supreme - Royal Blue (RB) add(+$35)" "Neo Supreme - Yellow (YL) add(+$35)" "Neo Supreme - Red (RD) add(+$35)" "Neo Supreme - Black (BK) add(+$35)" "Neo Supreme - Tan add(+$35)" "Neo Supreme - Pink add(+$35)" " " "GrandTex - Black add(+$35)" "GrandTex - Pewter/Black add(+$35)" "GrandTex - Pewter add(+$35)" "GrandTex - Oak add(+$35)" "GrandTex - Oak/Black add(+$35)" "GrandTex - Grey add(+35)" "GrandTex - Grey/Black add(+$35)" "GrandTex - Charcoal add(+$35)" "GrandTex - Charcoal/Black add(+$35)" " " "Camo - Digital Tan" "Camo - Game" "Camo - Migration" "Camo - Snow" "Camo - Digital Charcoal"|-||-|||-||AL-STORAGE|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata MX-5 Seat Storage Box with MX-5 Logo|,|al-storage|,|79.95|,|39.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Seat Storage Box with MX-5 Logo
Material: Fur + PU leather
Description：
Seat Gap Storage Box is made of durable fur + leather, which highly impacts resistant. So it won't crack, slide, bend, or leave any scratches. Seat Gap Filler Add extra space to your vehicle interior for your cell phone, keys, coins, and other small items. Reserve a hole for the charging cable
|,|"Select Color" "Select Here" "Green" "Red" "Brown" "Black" "Beige"|-||-|||-||MX5-POCKET|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda Miata MX-5 Suede Seat Side Storage Pocket|,|mx5-pocket|,|69.98|,|43.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Suede Seat Side Storage Pocket
|,|"Select Color" "Select Here" "Black" "Green" "Orange"|-||-|||-||901-312|,|SHOP-BY-SALE|,|*CLEARANCE ITEM* Mazda Miata NEOSUPREME Seat Covers 1990-2023 - SALE |,|901-312|,|245.99|,|171.02|,||,||,||,||,||,||,|Mazda Miata NEOSUPREME Seat Covers 1990-2023
Sold as a pair.
Note: Seat covers listed here as ""Direct Ship"" are made to order and will be shipped within 1-2 weeks.
We recommend you remove your seats before installing the covers. Please refer to a shop manual for more information.
|,|"Select Year" "Selet Here" "1990-1992" "1993-1995" "1996-1998" "1999-2000" "2001-2005" "2006-2007" "2008" "2009-2010" "2011-2015" "2016-2023"|-||-|"Select Color" "Select Here" "Black/Tan" "Black/Blue" "Black/Red" "Black/Charcoal" "Black/Yellow" "Black/Hawaiian Black add(+$25)" "Black/Hawaiian Red add(+$25)" "Black/Hawaiian Blue add(+$25)" " " "Charcoal" "Royal Blue" "Red" "Tan" "Pink" "Yellow" "Black"|-||-|||-||BHN1-V9-093|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Alloy Brake Pedal w/Automatic Transmission 2016+|,|BHN1-V9-093|,|125.95|,|109.02|,||,||,||,||,||,||,|Mazda Miata Alloy Brake Pedal w/Automatic Transmission 2016+
Also Known As:
Pedal Alloy Brake (A T)
Description:
Add a powerful look and help improve pedal grip in your Mazda with these high-quality aluminum Alloy Pedals and Footrest.
Brake Pedal for Automatic Transmissions only.
|,|||-||N121-V1-197F|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Bezels, Air Vent (Set Of 4) 2006-2015|,|N121-V1-197F|,|159.95|,|135.02|,||,||,||,||,||,||,|Mazda Miata OEM Bezels, Air Vent (Set Of 4) 2006-2015
Air Vent Bezel-Alum Tone
Give your MX-5 interior sporty good looks with these Air Vent Bezels in aluminum finish.
|,|||-||0000-8D-Z01|,|20MAMICARCAS3|,|*CLEARANCE ITEM* Mazda Miata OEM Collapsible Cargo Carrier 2013-2019|,|OEM-0000-8D-Z01|,|109.95|,|94.98|,||,||,||,||,||,||,|Mazda Miata OEM Collapsible Cargo Carrier 2013-2019
You've got a lot more to do than shop for groceries. This roomy carrier helps you pack in plenty of supplies, then lifts out
folds away flat to free up cargo space for your next errand. Holds up to 30lbs.
Reference Dimension (mm):
Compressed – 385 x 325 x 75
Expanded – 385 x 325 x 511
|,|||-||MAZFACCUP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Cup Holder 1990-1997|,|907-207|,|48.99|,|34.02|,||,||,|0.000 |,||,|gaaga|,||,|Mazda Miata OEM Cup Holder 1990-1997
If you are looking for a great Miata cup holder, look no further than this Genuine Mazda OEM Cup Holder! It takes the place of your ashtray and comes with an adapter to fit everything from a can of soda to a coffee cup or mug and even a large drink!
Don't settle for cheap imitations, this is the genuine article and fits perfectly!
Only fits model years 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||C905-V0-880|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Genuine Mazda LED Illuminated Ashtray 2015-2017|,|OEM-C905-V0-880|,|64.95|,|59.98|,||,||,||,||,||,||,|Mazda Miata OEM Genuine Mazda LED Illuminated Ashtray 2015-2017
Other Names: Ashtray Led
Description: Led illuminated ashtray.
|,|||-||OEM-WINDOW-SWITCH-NC|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Genuine Mazda Power Window Switch 2006-2008|,|OEM-NG21-66-350A-89|,|247.55|,|159.95|,||,||,|0.000 |,||,||,||,|Mazda Miata OEM Genuine Mazda Power Window Switch 2006-2008
Black w/o keyless entry - NE51-66-350-02
Tan w/o keyless entry - NE51-66-350-89
Black with keyless entry- NG21-66-350A-02
Tan with keyless entry - NG21-66-350A-89
VIN Required at Checkout
|,|"Select Option" "Select Here" "BLACK w/o keyless entry, w/o retractable hardtop" "TAN w/o keyless entry, w/o retractable hardtop" " " "BLACK with keyless entry add(+$85)" "TAN with keyless entry add(+$85)"|-||-|||-||NA14-76-250F-00|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Glove Box Lock Latch Handle1990-1993 |,|NA14-76-250F-00|,|208.26|,|162.02|,||,||,||,||,||,||,|Mazda Miata OEM Glove Box Lock Latch Handle1990-1993
Remanufactured Part, Key is not included.
|,|||-||9097FLOORMAT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Style Floor Mats with Miata logo 1990-1997|,|9097Floormat|,|189.99|,|139.45|,||,||,||,||,||,||,|Mazda Miata OEM Style Floor Mats with Miata logo 1990-1997
Unlike other lessor replacement floor mats, our Miata carpet floor mats are designed to be year specific so they trace the foot rest and floor pan area correctly. Made in the USA, our 1990 - 1997 Miata mats fit perfectly like the factory originals These easy to clean plush premium quality floor mats are available in factory black with logo and feature a special non slip padding on the back to help prevent movement; you will be truly impressed with the quality and value
|,|||-||MIOEMSTFRLIP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Style Front Lip Spoiler 1990-1997 - Sale!|,|RSP-NA00790974|,|229.95|,|159.90|,||,||,||,||,||,||,|Mazda Miata OEM Style Front Lip Spoiler 1990-1997 - Sale!
The refined, classic look of the R-Package spoiler is desired by many, and is a must-have for anyone racing in the Spec Miata series.
This OEM Style front lip spoiler are made from durable urethane and will stand up to abuse on the streets. These lip spoiler utilize the same factory mounting points as the OEM units to make installation a breeze and ensure picture-perfect fitment right out of the box. Like the originals, these spoilers are supplied in a durable satin black finish which be left as is or serve as a primer to have them color matched to your Miata.
The most exciting news is that the Rear Spoiler is available, and more importantly, affordable!
|,|||-||MIOEMSTRELIP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata OEM Style Rear Lip Spoiler 1990-1997|,|RSP-NA00790975|,|189.95|,|149.90|,||,||,|5.000 |,||,||,||,|Mazda Miata OEM Style Rear Lip Spoiler 1990-1997
The wait is over for people wanting to upgrade the looks of their Miata for not a lot of coin.
The refined, classic look of this spoiler is desired by many, and is a must-have for anyone racing in the Spec Miata series.
Our lips are made from durable urethane and will stand up to abuse on the streets. These Lips utilize the same factory mounting points as the OEM units to make installation a breeze and ensure picture-perfect fitment right out of the box. They come finished like the OEM piece so that you can leave them plain or have them color matched to your vehicle to create a more subtle enhancement to the look of your car.
The Front Lip is available by itself if you only want half of the look, so grab yours while they last!
|,|||-||MSLIPPER|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda Miata PP Cotton Slipper |,|mslipper|,|59.95|,|34.02|,||,||,||,||,||,||,|Mazda Miata PP Cotton Slipper
|,|||-||MAZDA-MIATA-RADIO-BEZEL-SURROUND-PANEL--TOMBSTONE-UNIT--1990-1993|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Radio Bezel Surround Panel "Tombstone Unit" 1990-1993 - Sale! |,|NA1-7305|,|117.52|,|99.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Radio Bezel Surround Panel "Tombstone Unit" 1990-1993 - Sale!
This replacement Radio Bezel Surround Panel is also known as the “tombstone” for the resemblance of its overall shape to the name plates found in a cemetery. This piece is a reproduction of the Mazda factory OEM piece and is done to the highest detail, and includes all mounting clips. If your Center Dash Faceplate is damaged this will save you some money over the factory piece.
Replaces Part#: NA01-55-210B-00
Fits: 1990-1993 Mazda Miata
|,|||-||MAMIREFIPA90|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Rear Finish Panel 1990-1997 Great for SPEC Miata!|,|712-555|,|309.99|,|248.02|,||,||,|5.000 |,||,||,||,|Mazda Miata Rear Finish Panel 1990-1997 Great for SPEC Miata!
Go Miata is pleased to announce these spectacular finish panels for the first time ever!
Made from ultra-durable ABS plastic and made to fit any 1990-1997 Mazda Miata, these are what you need to replace your poor, cracked, and brittle finish panel. Comparing the stock finish panel to this one is like comparing tissue paper to a cardboard box! It is very sturdy and has plenty of flex to it should you get in a fender bender or parking lot altercation.
These panels come bare, ready to paint and put on your car, or you can leave them as-is for an easy panda look! The panels also come with all the necessary bolts and clips to make it an easy bolt-in operation.
|,|||-||NA01-51-5H1C|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata REAR Side Marker Lamp 1990-1997|,|NA01-51-5H1C|,|75.98|,|38.02|,||,||,||,||,||,||,|Mazda Miata REAR Side Marker Lamp 1990-1997
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||MAZDA-MIATA-HEATER-HOSES-FOR-1999-2005-8-PCS-INCLUDING-RADIATOR-HOSES|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Silicone Radiator Coolant Hose Kit for 1999-2005 (11 pcs) - Sale! |,|mazda-miata-heater-hoses-for-1999-2005-8-pcs-including-radiator-hoses|,|219.99|,|129.45|,||,||,|0.000 |,||,||,||,|Mazda Miata Silicone Heater Hoses for 1999-2005 (11 pcs)
Specifications:
• Direct replacement for the standard hoses
• 4-ply polyester reinforced silicone
• Operating temperature range: -60°c to 235°c
• Pressure rating: 8bar max
• Highly resistant to oil & fuel spillages
• 1 year warranty
• NO clamps will be supplied
NOTE: Color Hose Pictures on this page are to show examples of the color of the hoses, they may or may not be the kit you are ordering. See "Heater Hoses Kit Contains" above to specify what you are ordering.
Approximate lead time is 15-25 days
|,|"Select Color" "Select Here" "Black" "Red" "Blue" "Orange" "Yellow" "Green" "Purple" "Pink" "White"|-||-|||-||NC-SILICONE-|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Silicone Radiator Hose 2006-2015 (20PCS) |,|NC-Silicone|,|285.00|,|225.00|,||,||,||,||,||,||,|Mazda Miata Silicone Radiator Hose 2006-2015 (20PCS)
Working temperature: -65F ~ 500F degrees
Working Pressure: 0.3 to 0.9Mpa
Bursting Pressure: 245 PSI
Thickness: 4.5mm, 3 ply
Size tolerance: +/-0.5mm
High quality silicone hose kit
hose kits are specifically designed to directly replace your Original Equipment hoses. These premium quality, hand crafted,high performance silicone hoses work to greater levels of temperature & pressure which is essential when you're upgrading your engine's performance
|,|"Select Color" "Select Here" "Black" "Blue" "Red"|-||-|||-||SKUNK2-THROTTLE-BODY-NB|,|19MAMIAIRFIA|,|*CLEARANCE ITEM* Mazda Miata Skunk2 Pro Series 64mm Throttle Body 1999-2005 *SALE*|,|SK2-309-10-0200|,|360.00|,|261.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Skunk2 Pro Series 64mm Throttle Body 1999-2005
Skunk2 is proud to introduce its 64mm Pro Series Throttle Body for the ’90-’97 NA, and ’99-‘05 NB Mazda Miata in its exclusive, hard anodized finish. Skunk2’s 64mm Pro Series Throttle Body is designed to be used with the OEM intake manifold for bolt-on horsepower and torque gains by maximizing engine airflow.
Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn't just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2’s signature finish. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and ultra-strong, upgraded shafts for ultimate durability. All necessary hardware and a new throttle body gasket are included for trouble-free installation.
A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Pro Series Throttle Bodies for Miatas feature a large, 64mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.
|,|||-||MAMISMTUSI19|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Smoked Turn Signals 1990-1997|,|STS-905-280|,|179.99|,|159.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Smoked Turn Signals 1990-1997
This isn't a flimsy cover, this is a complete replacement unit with a smoked lens.
* Easy plug-n-plug unit
* They are delivered with two-phase amber bulbs so they are street legal.
* Awesome styling paired with high-quality manufacture, these smoked lenses are perfect for your Mazda Miata!
Not DOT approved
|,|||-||MAZDA-MIATA-STAINLESS-STEEL-VENT-RING-SET-1990-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Stainless Steel Vent Ring Set 1990-2005 - Sale! |,|906-116|,|49.99|,|38.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Stainless Steel Vent Ring Set 1990-2005
Supplied as a set of four, these Stainless Steel Vent Rings spice up your Miata's interior with some flash and definition. Easily installed in minutes, these rings simply attach using an automotive quality 3M adhesive. Install one of our new Chrome/Leather Shift Knobs to match.
Note: 1 Set includes 4 Rings
|,|||-||MAMITALIBL19|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda Miata Tail Lights Black 1990-1997|,|LT-MIA-90JM-KS|,|149.00|,|119.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Tail Lights Black 1990-1997
Why buy tail lights?
We sell factory style replacement tail lights, and custom tail lights. Custom tail lights are a great way to modify the appearance of your car. Compared to other styling modifications, custom tail lights are relatively inexpensive and extremely easy to install. Most cars have a variety of custom tail lights available, including those with chrome, smoke and carbon fiber housings. The latest trend in the tail light market is LED tail lights, where a 'sea of little bulbs' lights up every time you brake. The lens patterns available also vary for custom tail lights, so check our product listings for details. If you want to give your car a modern, customized look, buying custom tail lights should be one of the first things you do.
Is there any difference between Altezza tail lights, Euro tail lights, or clear tail lights?
Altezza tail lights, euro tail lights and clear tail lights are terms that mean the exact same thing.
Do tail lights come in pairs?
All taillights we carry are always sold in pairs, unless otherwise noted in the listing on our website.
What exactly do the tail lights come with?
All the taillights we sell are complete. When you receive them in the mail from us, you take them out of the box, plug them in to your factory tail light harness, and you can immediately turn on the new taillights. Tail lights are certainly plug and play products.
How do you install tail lights?
Tail lights are manufactured to exact OEM specifications for easy installation, so you simply remove your factory tail lights and bolt in your new set. Basic hand tools are required and installation can be completed in a matter of minutes.
|,|||-||AL-SEAT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* MAZDA MX-5 Carbon Fiber Pattern Car Seat Belt Comfort Pads |,|AL-Seat|,|59.99|,|35.95|,||,||,||,||,||,||,|MAZDA MX-5 Carbon Fiber Pattern Car Seat Belt Comfort Pads
The text build dream has a reflective function and is safer to drive at night.
Soft and comfortable, fine workmanship,Quality is good,Good durability.
The style is simple and elegant, suitable for high grade meet the demand.
The inside is equipped with a fixed slide pasting design. The text effect is pasted and very firm. Please don't worry about the problem of easy falling off.It make your car be more fashion.
Each package includes 2 carbon fiber neck cushions. Price is for pair.
|,|"Select Color" "Select Here:" "Black-White" "Black-White Covered add(+$5)" "Black-Red Covered add(+$5)" "Beige-White Covered add(+$5)"|-||-|||-||KEEAUTOPMXMI19|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata - Convertible Soft Top Side Tension Cables 1990-1997|,|TDC421490-97|,|124.00|,|49.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata - Convertible Soft Top Side Tension Cables 1990-1997
This is a pair of side tension cables that can be replaced when replacing your top.
|,|||-||KEEAUTOPMXMI20|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata - Convertible Soft Top Side Tension Cables 1999-2005|,|TDC405199-04|,|124.00|,|49.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata - Convertible Soft Top Side Tension Cables 1990-1997
This is a pair of side tension cables that can be replaced when replacing your top.
|,|||-||MAMXMICUDAKI2|,||,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom Dash Kit - Real Carbon Fiber WITH Door Panels 2001-2005|,|409-BB03|,|339.99|,|199.95|,||,||,|0.000 |,||,||,||,|
If you are looking to give your Mazda MX-5 Miata's interior a great new look, nothing will hit the mark quite like a New Dash Kit.
Our Miata dash kits are very easy to install with peel and stick backing and your choice of many different materials including REAL WOOD, REAL CARBON FIBER and REAL BRUSHED ALUMINUM.
The company that produces our dash kits is top notch and the quality and fit is excellent. Our dash kits are all GENUINE WOOD and REAL COMPOSITE AND CARBON FIBER - NOT CARBON FIBER LOOK!
Total Thickness : With coating about 1/8 of an inch ( All Coatings Except RBA & RC )
Total Thickness : Without coating about 1/16 of an inch ( ONLY RBA & RC )
Scroll down to see the many choices available for your Miata.
Please Note: If your current faceplate, also known as a radio bezel, is broken, you will need to replace it before being able to fit this kit. These kits are special order, custom cut and are not returnable. Please allow 5-7 business days for production of your dash kit.
|,|||-||MAMXMICUDAKI1|,||,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom Dash Kit - Titanium Burl 1999-2000|,|409-BB02|,|319.99|,|199.95|,||,||,|0.000 |,||,||,||,|
If you are looking to give your Mazda MX-5 Miata's interior a great new look, nothing will hit the mark quite like a New Dash Kit.
Our Miata dash kits are very easy to install with peel and stick backing and your choice of many different materials including REAL WOOD, REAL CARBON FIBER and REAL BRUSHED ALUMINUM.
The company that produces our dash kits is top notch and the quality and fit is excellent. Our dash kits are all GENUINE WOOD and REAL COMPOSITE AND CARBON FIBER - NOT CARBON FIBER LOOK!
Total Thickness : With coating about 1/8 of an inch ( All Coatings Except RBA & RC )
Total Thickness : Without coating about 1/16 of an inch ( ONLY RBA & RC )
Scroll down to see the many choices available for your Miata.
Please Note: If your current faceplate, also known as a radio bezel, is broken, you will need to replace it before being able to fit this kit. These kits are special order, custom cut and are not returnable. Please allow 5-7 business days for production of your dash kit.
|,|||-||CLEARANCE-MAZDA-MX-5-MIATA-CUSTOM-E-BRAKE-BOOT-BY-REDLINEGOODS-2006-2010|,||,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom E-Brake Boot Black Leather and Half Perforated and Half Non Perforated 2006-2010|,|clearance-mazda-mx-5-miata-custom-e-brake-boot-by-redlinegoods-2006-2010|,|79.99|,|35.95|,||,||,|0.000 |,||,||,||,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom E-Brake Boot Black Leather and Half Perforated and Half Non Perforated 2006-2010
Mazda MX-5 Miata Custom eBrake Boot Only by Redline
The perfect way to further customize your Miata's interior. Hide the ugly, aged plastic under an elegant leather cover with stitching to match your shift boots, center console and padded door armrests.
Red Line custom E-brake boot 2006-2010
Black Leather and Half Perforated and Half Non Perforated
Stitching color: Red JDM
Left Hand Drive
* Image does NOT represent this exact part for sale *
|,|||-||MAMXMICUFILU|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom Fitted Luggage Bags with "Roadster" Logo (1990-1997)|,|RTL-NABSFL1RD|,|199.99|,|149.98|,||,||,|0.000 |,||,||,||,|These 2-Piece Custom Fitted Luggage Bags for the Mazda MX-5 Miata are rugged, functional accessories to the MX-5 Miata and have the following unique elements:
Design Features:
* These bags are shaped to match the dimensions of the trunk, allowing you to carry an enormous amount of travel gear in the small trunk of your roadster
* Durable leather piping with a lightweight metal core along the sides protect the bags from damage and rough handling
* Adjustable shoulder straps and padded carry handles allow you to effortlessly move your travel gear to and from your roadster
* Rugged and oversized zippers for easy handling and exceptional durability
* Heavy duty hardware ensure years of reliable service
* Practical utility pockets on each bag store miscelleneous items such as maps, hotel tickets, etc
* The embroidered JDM-style "Roadster" logo unmistakably identifies these bags as an accessory for your MX-5
* 1990-2005 Pair of bags, both 10.5" x 16.5" x 15"
Material:
These bags are constructed with a triple-layer fabric designed for the hostile environment of the trunk:
* An outer shell of extremely durable nylon to withstand the heat and abrasion from movement in the trunk.
* A core layer of efficient insulating material to help protect your belongings on hot sunny days. It also allows the bags to maintain its distinctive shape when outside the trunk.
* An inner layer of soft but durable nylon material is easy on the hands and on your belongings
* The base is made of a solid but flexible material to further protect your belongings
|,|"Embroidery / Trim Color" "Red"|-||-|||-||MAMXMICUFILU1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom Fitted Luggage Bags with "Roadster" Logo (1999-2005)|,|RTL-NABSFL1RD-NB|,|229.99|,|159.02|,||,||,|0.000 |,||,||,||,|These 2-Piece Custom Fitted Luggage Bags for the Mazda MX-5 Miata are rugged, functional accessories to the MX-5 Miata and have the following unique elements:
Design Features:
* These bags are shaped to match the dimensions of the trunk, allowing you to carry an enormous amount of travel gear in the small trunk of your roadster
* Durable leather piping with a lightweight metal core along the sides protect the bags from damage and rough handling
* Adjustable shoulder straps and padded carry handles allow you to effortlessly move your travel gear to and from your roadster
* Rugged and oversized zippers for easy handling and exceptional durability
* Heavy duty hardware ensure years of reliable service
* Practical utility pockets on each bag store miscelleneous items such as maps, hotel tickets, etc
* The embroidered JDM-style "Roadster" logo unmistakably identifies these bags as an accessory for your MX-5
* 1990-2005 Pair of bags, both 10.5" x 16.5" x 15"
Material:
These bags are constructed with a triple-layer fabric designed for the hostile environment of the trunk:
* An outer shell of extremely durable nylon to withstand the heat and abrasion from movement in the trunk.
* A core layer of efficient insulating material to help protect your belongings on hot sunny days. It also allows the bags to maintain its distinctive shape when outside the trunk.
* An inner layer of soft but durable nylon material is easy on the hands and on your belongings
* The base is made of a solid but flexible material to further protect your belongings
|,|"Embroidery / Trim Color" "Red"|-||-|||-||NC-SFL1RD|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom Fitted Luggage Bags with "Roadster" Logo 2006-2015|,|NCSFL1RD|,|300.00|,|189.02|,||,||,||,||,||,||,|Mazda MX-5 Miata Custom Fitted Luggage Bags with "Roadster" Logo 2006-2015
These 3-Piece Roadtrip Fitted Luggage Bags for the MX-5 are rugged, functional accessories to the MX-5 and have the following unique elements:
Design Features:
these bags are shaped to match the dimensions of the trunk, allowing you to carry an enormous amount of travel gear in the small trunk of your roadster
durable rubber piping with a lightweight metal core along the sides protect the bags from damage and rough handling
Adjustable shoulder straps and padded carry handles allow you to effortlessly move your travel gear to and from your roadster
rugged and oversized zippers for easy handling and exceptional durability
heavy duty hardware ensure years of reliable service
Practical utility pockets on each bag store miscelleneous items such as maps, hotel tickets, etc
The embroidered JDM-style "Roadster" logo unmistakably identifies these bags as an accessory for your MX-5
Material:
These bags are constructed with a triple-layer fabric designed for the hostile environment of the trunk:
an outer shell of extremely durable nylon to withstand the heat and abrasion from movement in the trunk.
a core layer of efficient insulating material to help protect your belongings on hot sunny days. It also allows the bags to maintain its distinctive shape when outside the trunk.
an inner layer of soft but durable nylon material is easy on the hands and on your belongings
the base is made of a solid but flexible material to further protect your belongings
|,|||-||NDFL1RD|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda MX-5 Miata Custom Fitted Luggage Bags with "Roadster" Logo 2016+|,|NDFL1RD|,|329.95|,|239.02|,||,||,||,||,||,||,|Mazda MX-5 Miata Custom Fitted Luggage Bags with "Roadster" Logo 2016+
These 3-Piece Roadtrip Fitted Luggage Bags for the MX-5 are rugged, functional accessories to the MX-5 and have the following unique elements:
Design Features:
these bags are shaped to match the dimensions of the trunk, allowing you to carry an enormous amount of travel gear in the small trunk of your roadster
durable rubber piping with a lightweight metal core along the sides protect the bags from damage and rough handling
Adjustable shoulder straps and padded carry handles allow you to effortlessly move your travel gear to and from your roadster
rugged and oversized zippers for easy handling and exceptional durability
heavy duty hardware ensure years of reliable service
Practical utility pockets on each bag store miscelleneous items such as maps, hotel tickets, etc
The embroidered JDM-style "Roadster" logo unmistakably identifies these bags as an accessory for your MX-5
Material:
These bags are constructed with a triple-layer fabric designed for the hostile environment of the trunk:
an outer shell of extremely durable nylon to withstand the heat and abrasion from movement in the trunk.
a core layer of efficient insulating material to help protect your belongings on hot sunny days. It also allows the bags to maintain its distinctive shape when outside the trunk.
an inner layer of soft but durable nylon material is easy on the hands and on your belongings
the base is made of a solid but flexible material to further protect your belongings
**Please allow 2-4 business days for production of these Custom made Custom Fitted Luggage Bags.**
|,|||-||MAMXMIDEBAG1|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata Deck Bag with "Roadster" Logo (1990-2005)|,|RTL-NABDB1|,|99.99|,|78.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Deck Bag (1990-2005)
No more space in your trunk? Our deck bags allow you to bring even more stuff in the unused space behind the rear seats! Our design makes use of the tonneau cover snaps, so these bags are always securely attached to your vehicle. Works with the tonneau cover on or off!
Design Features:
* Use the heavy-duty snaps to secure the bag when the tonneau cover is off
* Use the ingenious hoops to secure the bag when the tonneau cover is on
* Heavy duty hardware ensure years of reliable service
* The embroidered JDM-style "Roadster" logo unmistakably identifies these bags as an accessory for your MX-5
|,|"Embroidery / Trim Color" "Red"|-||-|||-||MAZDA-MX-5-MIATA-DECK-BAG-XL-1990-2005-|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata Deck Bag XL (1990-2005)|,|NABDB2SI|,|180.00|,|109.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Deck Bag XL (1990-2005)
Twice the capacity and lots more features than our regular deck bags! Our design makes use of the tonneau cover snaps, so these bags are always securely attached to your vehicle.
Design Features:
• You asked for it! Shoulder straps and exterior pocket for even more convenience!
• Double-zipper design, so you can open the bags from the left, right or from the center
• Use the heavy-duty snaps to secure the bag when the tonneau cover is off
• Use the ingenious hoops to secure the bag when the tonneau cover is on
• Heavy duty hardware ensure years of reliable service
• The embroidered JDM-style "Roadster" logo unmistakably identifies these bags as an accessory for your MX-5
|,|||-||MAZDA-2007-MX-5-MIATA-DIGITALFIT-FLOORLINER-LASER-MEASURED-FOR-A-PERFECT-FIT-BLACK|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata DigitalFit FloorLiner - Laser measured for a Perfect Fit (2006-2015 Black)|,|WT442621|,|149.95|,|127.05|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata DigitalFit FloorLiner - Laser measured for a Perfect Fit (2006-2015 Black)
FloorLiner™ DigitalFit®
In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech® have worked tirelessly to develop the most advanced DigitalFit® floor protection available today!
The WeatherTech® FloorLiner™ DigitalFit® accurately and completely lines the interior carpet giving "absolute interior protection™"! The WeatherTech® FloorLiner™ DigitalFit® lines the interior carpet up the front, back and even up the sides of the vehicle’s footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit!
A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech® FloorLiner™ DigitalFit® over the door sill. No muss-no fuss!
WeatherTech®, where Technology and All Weather Protection meet!
Rear FloorLiner™ DigitalFit®
Rear FloorLiner™ DigitalFit® incorporates many of the same design features as the front FloorLiner™ DigitalFit®. Rear FloorLiner™ DigitalFit® (where offered) is manufactured from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under extreme temperatures. Rear FloorLiner™ DigitalFit® is either one piece or two piece depending on the vehicle application.
Helps Protect Resale Value
Rear FloorLiner™ DigitalFit® protects resale value too! Simply put, the cost of owning a vehicle is the difference between what you pay for it and what you sell it for. There are many factors that influence resale value; miles, exterior condition, maintenance history and of course interior condition. FloorLiner™ DigitalFit® is proudly designed, engineered and manufactured with American made tooling in the USA.
FloorLiner™ DigitalFit® is designed for vehicles with factory carpet installed when manufactured. They will not fit vehicles with vinyl floors unless otherwise specified. Please take your old floor mats out before installing your new WeatherTech® FloorLiner™ DigitalFit®.
Please note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
|,|"Application Years" "Mazda MX-5 Miata 2006-2015 "|-||-|||-||MAZDA-2007-MX-5-MIATA-DIGITALFIT-FLOORLINER-LASER-MEASURED-FOR-A-PERFECT-FIT-GRAY|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata DigitalFit FloorLiner - Laser measured for a Perfect Fit (2006-2015 Gray)|,|WT462621|,|149.95|,|129.05|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata DigitalFit FloorLiner - Laser measured for a Perfect Fit (Gray)
FloorLiner™ DigitalFit®
In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech® have worked tirelessly to develop the most advanced DigitalFit® floor protection available today!
The WeatherTech® FloorLiner™ DigitalFit® accurately and completely lines the interior carpet giving "absolute interior protection™"! The WeatherTech® FloorLiner™ DigitalFit® lines the interior carpet up the front, back and even up the sides of the vehicle’s footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit!
A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech® FloorLiner™ DigitalFit® over the door sill. No muss-no fuss!
WeatherTech®, where Technology and All Weather Protection meet!
Rear FloorLiner™ DigitalFit®
Rear FloorLiner™ DigitalFit® incorporates many of the same design features as the front FloorLiner™ DigitalFit®. Rear FloorLiner™ DigitalFit® (where offered) is manufactured from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under extreme temperatures. Rear FloorLiner™ DigitalFit® is either one piece or two piece depending on the vehicle application.
Helps Protect Resale Value
Rear FloorLiner™ DigitalFit® protects resale value too! Simply put, the cost of owning a vehicle is the difference between what you pay for it and what you sell it for. There are many factors that influence resale value; miles, exterior condition, maintenance history and of course interior condition. FloorLiner™ DigitalFit® is proudly designed, engineered and manufactured with American made tooling in the USA.
FloorLiner™ DigitalFit® is designed for vehicles with factory carpet installed when manufactured. They will not fit vehicles with vinyl floors unless otherwise specified. Please take your old floor mats out before installing your new WeatherTech® FloorLiner™ DigitalFit®.
Please note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
|,|"Application" "Mazda MX-5 Miata 2006-2015"|-||-|||-||MAZDA-MX-5-MIATA-DUAL-CUP-HOLDER|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata Dual Cup Holder *-SALE* |,|Dual-Cup-Holder|,|109.99|,|83.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Dual Cup Holder
Shifting your Miata with a cup in the OE cup holder is uncomfortable and can get messy if you aren't paying attention. A Miata enthusiast found a solution online built for Corvettes and made it work in his Miata. The manufacturer got wind of the Miata need and retooled the part to fit Miatas - and here we have the final product. This is a NO TOOLS installation, simply slip the top tongue under your plastic console and use your floor mat to anchor the bottom tongue.
|,|"Select Year" "Select Here" "1990-1997" "1999-2005" "2006-2015"|-||-|||-||MAZDA-MX-5-MIATA-O2-SENSOR-FOR-1999-2000-1-8-FRONT-PRE-CAT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata O2 Sensor for 1999 - 2000 1.8 Front Pre Cat - Direct Fit Replaces Mazda BP4Y-18-861C-9U For California Emission Cars|,|NAB-7256|,|112.46|,|79.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata O2 Sensor for 1999 - 2000 1.8 Front Pre Cat - Direct Fit Replaces Mazda BP4Y-18-861C-9U For California Emission Cars
For California Emission Cars, this Oxygen Sensor for 1999-2000 1.8L Mazda Miata MX-5. Bank 1: replaces Mazda BP4Y-18-861C-9U the first o2 which is located in exhaust manifold. Mounted to the front of the engine.
The oxygen sensor is a critical component of the automotive fuel injection system; it constantly measures the oxygen content in the exhaust gas and helps the ECU (Vehicle Computer) ensure optimal engine operation at an industry standard of14.7.1.
Most importantly, too much oxygen in air/fuel ratio means the engine is running lean which is less than optimal causing reduced engine performance and damaging detonation. Oppositely, if there is too little oxygen in the ratio it means the engine is running rich and wasting excessive fuel and creating excess emission. Both conditions may shorten the lifespan of a vehicle's engine and catalytic converter.
These Oxygen Sensors are the result of rigorous testing on and off track to produce Oxygen Sensors that operate consistently at OE specifications; as such they increase vehicle's engine performance, lower vehicle emissions, and improve vehicle's fuel economy. To ensure longer sensor lifecycles and vehicle safety, every R Speed sensors is produced with premium materials that protect the sensor against the harsh environment inside of the exhaust pipe, which cause premature sensor failure in common in mass produced units. In addition, all 02s are tested against the sensor's function parameters to guarantee the highest quality and stability for even the most discerning Mazda MX-5 Miata owners.
Unlike troublesome universal units, ours does not require any cutting or splicing as all our Miata o2 Sensors feature original style plug and play harnesses. Additionally, we build all O2 Sensors in the Rounded hole, frontal tube, OS5 Japanese type just like the OEM units that where factory equipped with your Mazda MX-5 Miata.
|,|||-||MAZDA-MX-5-MIATA-O2-SENSOR-FOR-CALIFORNIA-NEW-YORK-1999-2000-1-8-AFTER-EXHAUST-MANIFOLD|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata O2 Sensor for California - New York 1999 - 2000 1.8 after Exhaust Manifold - Direct Fit Replaces Mazda BP4X-18-861C-9U|,|NAB-7253|,|112.46|,|79.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata O2 Sensor for California - New York 1999 - 2000 1.8 after Exhaust Manifold - Direct Fit Replaces Mazda BP4X-18-861C-9U
This Oxygen Sensor for is California and New York Emissions 1999-2000 1.8L Mazda MX-5 Miata. Bank 1: replaces Mazda BP4X-18-861A-9U the second o2 which is located in the just behind the exhaust manifold. Harness mounted back of the engine.
The oxygen sensor is a critical component of the automotive fuel injection system; it constantly measures the oxygen content in the exhaust gas and helps the ECU (Vehicle Computer) ensure optimal engine operation at an industry standard of14.7.1.
Most importantly, too much oxygen in air/fuel ratio means the engine is running lean which is less than optimal causing reduced engine performance and damaging detonation. Oppositely, if there is too little oxygen in the ratio it means the engine is running rich and wasting excessive fuel and creating excess emission. Both conditions may shorten the lifespan of a vehicle's engine and catalytic converter.
This Oxygen Sensors are the result of rigorous testing on and off track to produce Oxygen Sensors that operate consistently at OE specifications; as such they increase vehicle's engine performance, lower vehicle emissions, and improve vehicle's fuel economy. To ensure longer sensor lifecycles and vehicle safety, every O2 sensors is produced with premium materials that protect the sensor against the harsh environment inside of the exhaust pipe, which cause premature sensor failure in common in mass produced units. In addition, all 02s are tested against the sensor's function parameters to guarantee the highest quality and stability for even the most discerning Miata owners.
Unlike troublesome universal units, ours does not require any cutting or splicing as all our Miata o2 Sensors feature original style plug and play harnesses. Additionally, we build all O2 Sensors feature OE Type connectors, in the rounded hole, frontal tube, Japanese type just like the OEM units that where factory equipped with you Mazda MX-5 Miata.
|,|||-||N243-41-400|,|CLEARANCE|,|*CLEARANCE ITEM* MAZDA MX-5 MIATA OEM Clutch Master Cylinder 2016-2023|,|NA1J-41-400|,|164.21|,|129.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Master Cylinder 2016-2023
Other Names: Cylinder Clutch Master
Description: Miata mx5.
Manufacturer: Genuine Mazda Original Parts
|,|||-||G561-16-510C|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* MAZDA MX-5 MIATA OEM CLUTCH RELEASE BEARING 2006-2015|,|G561-16-510C|,|91.47|,|73.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM CLUTCH RELEASE BEARING 2006-2015
|,|||-||N251-41-920|,|CLEARANCE|,|*CLEARANCE ITEM* MAZDA MX-5 MIATA OEM Clutch Slave Cylinder 2016-2023+|,|n251-41-920|,|118.19|,|96.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Clutch Slave Cylinder 2016-2023+
Other Names: Cylinder Clutch Release
Manufacturer: Genuine Mazda Original Parts
|,|||-||NF79-56-820A|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* MAZDA MX-5 MIATA OEM Trunk Lock 2006-2015|,|nf79-56-820a|,|148.56|,|119.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Trunk Lock Without retractable hard top 2006-2015
PRODUCT DETAILS
Other Names: Lock Lid
Description: Miata mx5. Without retractable hard top.
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "W/ O RETRACTABLE HARD TOP" "W/ RETRACTABLE HARD TOP - NE52-56-820A"|-||-|||-||MAZDA-MX-5-MIATA-G-WING-HARDTOP-SPOILER-1990-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata Rear Window Roof Visor Hardtop Spoiler 1990-2005|,|H-Wing|,|280.00|,|199.98|,||,||,|5.000 |,||,||,||,|Mazda MX-5 Miata Rear Window Roof Visor Hardtop Spoiler 1990-2005
Fit 1990 - 2005 Mazda Miata Models Only
Made from High-Quality Light Weight Durable Acrylic Material
Protects Your Rear Window From Snow, Rain, etc
Perfect Exterior Styling Appearance To Your Vehicle
Installation Manual and Tool is NOT Included; Professional Installation is Highly Recommend
Features:
-Lightweight Acrylic
-Prime Location for Mirrored Decal
-3M All Weather Double Sided Tape
[spoiler mounts on to OEM molding]
|,|||-||MAZDA-MX-5-MIATA-ROADSTER-SEATBACK-LUGGAGE-|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata Roadster Seatback Luggage |,|BSGB1|,|260.00|,|169.98|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Roadster Seatback Luggage
Go Miata is excited to release this premium tri-fold garment bag design that hangs from the headrest, behind the seat! Large enough for full-length overcoats, with multiple external and internal pockets for folded clothes, shoes, and other travel accessories! Includes a carry handle and a removable, adjustable shoulder strap. Airline carry on - friendly dimensions.
External Features:
• Ballistic nylon shell with leather trim
• Headrest mount "hoodie" (concealed in a zippered pocket when not in use)
• Front zip pockets
• Back zip pocket/handle sleeve
• Top carry handle
• Removable, adjustable shoulder strap
• Door hook adapter
Internal Features:
• Garment curtain with 3 zip pockets keeps the dust away
• Internal hanging hook
• Securing straps (keeps hangered clothes in place
• 2 additional zip pockets
|,|||-||MIATA-SOUND-TUBE-DELETE-KIT-|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda MX-5 Miata Sound Tube Delete Kit 2016+|,|910-894|,|43.99|,|30.02|,||,||,||,||,||,||,|Mazda MX-5 Miata Sound Tube Delete Kit 2016+
Removing the factory sound tube from the engine compartment is beneficial for many reasons. Reducing the engine noise you hear means you can better hear your performance exhaust. It also clears up space to add an aftermarket front shock tower brace. Kit is made of Mazda factory parts, a cap for the tube and for the firewall. Installs in about 20 minutes.
|,|||-||MIMX5TRLIKIT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata Trunk Lift Kit|,|CC-P1078|,|55.99|,|39.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Trunk Lift Kit
Install this kit and your trunk lid will smoothly open with just a turn of the key!
Our premium kit includes a high-quality gas-charged prop and powder coated bracket to provide a smooth, dampened lift action, and an easy non-dampened closing. Almost invisible when installed.
This high quality kit has been on the market for over a decade, and has been purchased by thousands of Miata owners. This is THE kit for your Miata.
Quality Made in USA.
Mazda Miata Trunk Lift Kit for 1990-2005.
|,|||-||909-715|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda MX-5 MIATA Vinyl Convertible Top With Glass Window & Rain Rail 1990-2005 *SALE* |,|909-715|,|598.00|,|408.02|,||,||,||,||,||,||,|Mazda MX-5 MIATA Vinyl Convertible Top With Glass Window & Rain Rail 1990-2005
This replacement convertible tops offer high-quality construction with Cab grain acoustic vinyl material for a great price! These tops are perfect for the Miata owners who usually leave their top down, or are saving for other upgrades.
This replacement convertible tops are constructed as a one-piece design, with original style top deck seams. These can be ordered with a rain rail. They come with a 40 gauge plastic window that is DOT approved, easy to fold, and non-zippered. The material, Cab grain vinyl, is a 2-ply composite with a heavy duty PVC outer layer and a Polyester laminated backing. Get great craftsmanship and build quality at a lower price!
Features:
-One-piece design is better than OEM
-Glass Window or Glass Window with Defroster
-Rain Rail comes with it
|,|"Select Color" "Select Here" "Black" "Tan"|-||-|"Select Rear Window" "Select Here" "Glass Window" "Glass Window with Defroster add(+$40)"|-||-|||-||909-716|,|CLEARANCE|,|*CLEARANCE ITEM* Mazda MX-5 MIATA Vinyl Convertible Top Without Rain Rail 1990-2005 *SALE* |,|909-716|,|429.00|,|259.02|,||,||,||,||,||,||,|Mazda MX-5 MIATA Vinyl Convertible Top Without Rain Rail 1990-2005
This replacement convertible tops offer high-quality construction with Cab grain acoustic vinyl material for a great price! These tops are perfect for the Miata owners who usually leave their top down, or are saving for other upgrades.
This tops are constructed as a one-piece design, with original style top deck seams. These can be ordered with a rain rail. They come with a 40 gauge plastic window that is DOT approved, easy to fold, and non-zippered. The material, Cab grain vinyl, is a 2-ply composite with a heavy duty PVC outer layer and a Polyester laminated backing. Get great craftsmanship and build quality at a lower price!
Features:
-One-piece design is better than OEM
-Either Plastic window size is 14" H x 31" W or Glass Window
Please Note:
-This tops without the rain rail option do not come pre-drilled for rain rail installation, and will require some modifications.
|,|"Select Color" "Select Here" "Black" "Tan"|-||-|"Select Rear Window" "Select Here" "Plastic Window" "Glass Window add(+$110)" "Glass Window with Defroster add(+$150)"|-||-|||-||MAZDA-MX-5-MIATA-WEATHERTECH-CARGO-TRUNK-LINER--2006-2015-|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Mazda MX-5 Miata WeatherTech Cargo/Trunk Liner 2006-2015|,|WT40435|,|145.95|,|118.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata WeatherTech Cargo/Trunk Liner (2006-2015)
Cargo Liners
WeatherTech® Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicle’s interior, protecting your investment from normal wear and tear.
Made from a proprietary custom blended TPE that is not only wear resistant, but also remains flexible under temperature extremes. WeatherTech® Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet.
WeatherTech® Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.
Cargo Liners Offer:
Interior protection from all types of wear and tear
Custom molded specifically for your vehicle
Easy installation
High outside lip that helps contain spills
Quick and easy cleanup
A skid-resistant surface
Protects and preserves the cargo area and trunk carpet
Toughness and durability
WeatherTech® Bumper Protector
The WeatherTech® Bumper Protector is a great addition to your Cargo Liner to help protect the surface of your vehicle’s bumper from dings and scratches when loading or unloading personal items or pets. The Bumper Protector is made from highly durable vinyl fabric that easily snaps onto your Cargo Liner by stainless, rust resistant snaps. The WeatherTech® Bumper Protector comes in two sizes: 30" x 30" and 30" x 40". Bumper Protectors are vehicle specific so the correct size option will be shown for your vehicle.
To protect your bumper, simply snap on the Bumper Protector to your Cargo Liner, unravel the Bumper Protector so that it covers your vehicle’s bumper, and when not in use, easily roll up and secure with sewn in Hook and Loop straps to hold the Bumper Protector in place. Item is easily removable for cleaning.
**The WeatherTech® Bumper Protector is only available in Black for select vehicles.
Please note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
|,|"Application" "Mazda MX-5 Miata 2006-2015"|-||-|||-||ZOOM-WIDE-ANGLE-BLUE-SIDE-MIRROR-LENSES|,|20MIMIEXPA|,|*CLEARANCE ITEM* Mazda MX-5 Miata ZOOM Wide Angle Blue Side Mirror Lenses 1990-2014|,|zoom-wide-angle-blue-side-mirror-lenses|,|249.99|,|189.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata ZOOM Wide Angle Blue Side Mirror Lenses 1990-2014
Product made by Zoom. Can't see much with your stock mirrors? Zoom provides you with their wide angle mirror lenses with blue tint to reduce glare at night.
• Looks great
• 5 minutes to install
• Perfect fit
• Available for NA Miata (1989-1997), NB Miata (1999-2005) & NC Miata (2006-2014)
Price is for the PAIR
|,|"Select Year" "Select Here" "NA6CE (90-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-14)"|-||-|"Mirror type" "Select Here" "Electric" "Manual"|-||-|||-||MAZDA-HEADREST|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|*CLEARANCE ITEM* Mazda MX-5 Neck Pillow Foam Cushion Pad Head Support|,|mazda-headrest|,|104.95|,|79.95|,||,||,||,||,||,||,|Mazda MX-5 Black Carbon Fiber Pattern Neck Pillow Form Cushion
3D Effect Carbon Fiber Finish - Car Accessory Warehouse Exclusive Engineering and Design. Carbon fiber natural feel with unmatched softness that no other material can offer. Attractive embroidered logo design while providing comfort and relieves sore necks. Flexible Matrix Technology - groundbreaking soft-touch feel yet lightweight. Product
Dimensions: 5.00" (W) x 9.00" (L) x 2.75" (H) (approximate).
Designed and engineered for automotive seats with headrests of all vehicle types, easy installation with incorporated elastic belt on the backside.
Each package includes 2 carbon fiber neck cushions. Price is for pair.
|,|"Select Color" "Select Here" "Red" "White"|-||-|||-||EVIVCUSFITCO|,|20MAMICARCAS3|,|*CLEARANCE ITEM* Miata Car Cover Covercraft Custom Fit Cockpit - 1990-2005 |,|808-225|,|135.99|,|89.95|,||,||,|0.000 |,||,|sdfdf|,||,|Car Cover Covercraft Custom Fit IV Cockpit - 1990-2005
Easy to use protection for your Miata when the top is down.
Cockpit covers protect the windshield and interior from ultraviolet sun rays, airborne pollutants and droppings from trees and birds. This material is also water resistant to protect against dew and light rain.
Easy to install!
Fits all years except MazdaSpeed Miata. Also, does not fit with roll bars, soft top up, or hard top on.
For Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004, and 2005
|,|||-||CI-EBC-DP21685-GREEN-REAR-BRAKES-W-SPORT|,||,|*CLEARANCE ITEM* Miata EBC Greenstuff Brake Pads - Rear Set 2004-2005 With Sport Suspension Only|,|ci-ebc-dp21685-green-rear-brakes-w-sport|,|99.99|,|74.90|,||,||,|0.000 |,||,||,||,|Miata EBC Greenstuff Brake Pads - Rear Set 2004-2005 With Sport Suspension Only
*Only 3 available at this price, final sale
*EBC Part# DP21685
*Local Pick Up available in Irvine, CA
This pad features a high Kevlar content formulation resulting in an ultra high performance road pad which is extremely kind to discs. With a friction co-efficient of around 0.46µ and high resistance to brake fade (550º C) this pad is a superb upgrade for high performance street cars, high speed freeway use and consecutive heavy braking.
Greenstuff has won many awards from UK magazines, and was rated #1 fast road car brakes by UK's largest circulation motorsport magazine, Max Power, in 1999.
Features and Benefits of Greenstuff: Upgrades brake performance by 30-50%, friction co-efficient of 0.46µ
Excellent initial bite resulting in instant response - no warm-up needed
Class-leading fade resistance on the street - heat stable to a blistering 550ºC
Extremely low disc abrasion - due to high Kevlar content low dust formula, great for alloys - due to zero carbon content
Low vibration - smooth operation
|,|||-||MIMX5EXCOCUP|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Miata MX5 Expandable & Collapsible Cup Holder|,|CC-P1057|,|25.99|,|14.95|,||,||,|0.000 |,||,||,||,|
This Cup holder is a perfect match for your Miata!
Made of black, grained plastic to match other parts of the interior, it adjusts to hold any size can, cup or mug. And when not in use, it folds up to just 3/4" thin!
Mounts using an existing hole, plus one through the carpet, so that it does not leave marks if it is ever removed.
Don't settle for cheap imitations, this is the Best Collapsible Cup Holder for your Miata.
Cupholder Installation Instructions
1. Most sportscars: find the best position in your car for the cupholder, keeping in mind your reach, handbrake
location, and your passenger seat travel. Then punch* (with SHARP awl and hammer) or drill two to four holes
through the carpet and tunnel for fastening the cupholder with the countersunk screws. Note that these screw
holes become invisible if the cupholder is removed at some later date.
2. Miata owners: remove the screw at the edge of the console and replace with the longer one provided. Optional: then punch* (with SHARP awl and hammer) or drill one or two more holes through the carpet and tunnel for additional screws. Note that these screw holes become invisible if the cupholder is removed at some
later date.
* NOTE: Punching is the best technique, as drill bits tend to grab insulation under your carpet and ball it up!
|,|"Select Color" "Black"|-||-|||-||TIMOMIAD|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Miata Tight Fit Adapter for Universal Shift Knobs|,|488-301|,|79.99|,|49.95|,||,||,|0.000 |,||,||,||,|Miata Tight Fit Adapter for Universal Shift Knobs
HIGHLY RECOMMENDED FOR YOUR UNIVERSAL SHIFT KNOB.
Now there is a way to properly install your universal shift knob to your Miata for a tight and solid feel!
While the standard set screws can work, they leave a small gap between the knob and the boot, and often, the knob doesn't feel as secure at all.
Well a fellow Miata owner has come up with the solution! Exclusively at Go Miata, the Tight Fit Miata Adapter is a threaded aluminum sleeve that screws on to your Miata's shift lever. The knob then mounts to the sleeve! The end result leaves the knob positioned correctly and leaves no gap between the knob and boot (i.e. no part of the stick is left exposed). The adapter stays tight and knob retains a firm feel.
Makes a HUGE difference with your universal shift knob. Complete instructions included.
|,|||-||GOMIATA-CARBON-FIBER-ANTENNA|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-1999-2005|,|*CLEARANCE ITEM* Miata Universal Carbon Fiber Short Antenna with Mazdaspeed Logo|,|gomiata-carbon-fiber-antenna|,|29.99|,|21.95|,||,||,|0.000 |,||,||,||,|Miata Universal Carbon Fiber Short Antenna with Mazdaspeed Logo
12 cm Tall
Fits all Miata years and most cars without power antenna.
|,|||-||4PISEVICH|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Miata Vintage Chrome 4 Piece Set|,|503-360|,|135.56|,|109.95|,||,||,|0.000 |,||,||,||,|Miata Vintage Chrome 4 Piece Set
Save $40.01 from retail!
Thanks to the ultra flexible nature of this high quality molding, this kit molds perfectly to the difficult compound curves of your Miata.
4 piece kit contains:
1-door topper trim kit
1-windshiel trim kit
1-vent window trim kit
1-tailight surround trim kit
Frequently Asked Questions
Q: What year Miatas will these kits fit?
A: Miata Vintage Chrome vinyl molding kits fit all Miatas.
Q: Are these kits easy to install?
A: Extremely easy! Most can literally be installed in a few minutes.
Q: Are there any special tools required to install these kits?
A: Since a few kits are intentionally made longer than needed, and require trimming for an exact fit, the only tool you may need is an anvil type garden pruner. These have a cutting blade on one side, and a flat 'anvil' on the other. Always cut molding from the chrome side down. Trimming tips are included with each kit.
Q: I'm not a real "do-it-yourselfer", how detailed are the instructions?
A: Each kit comes with detailed installation instructions which include photos, along with installation and surface-prep tips. You'll be surprised that something that makes your car look this good, installs so easily.
The Miata Vintage Chrome - 4 piece kit fits model years 1990-2005
|,|||-||CI-503-360|,||,|*CLEARANCE ITEM* Miata Vintage Chrome 4 Piece Set|,|ci-503-360|,|134.96|,|109.95|,||,||,||,||,||,||,|Miata Vintage Chrome 4 Piece Set
Save $40.01 from retail!
Thanks to the ultra flexible nature of this high quality molding, this kit molds perfectly to the difficult compound curves of your Miata.
4 piece kit contains:
1-door topper trim kit
1-windshiel trim kit
1-vent window trim kit
1-tailight surround trim kit
Frequently Asked Questions
Q: What year Miatas will these kits fit?
A: Miata Vintage Chrome vinyl molding kits fit all Miatas.
Q: Are these kits easy to install?
A: Extremely easy! Most can literally be installed in a few minutes.
Q: Are there any special tools required to install these kits?
A: Since a few kits are intentionally made longer than needed, and require trimming for an exact fit, the only tool you may need is an anvil type garden pruner. These have a cutting blade on one side, and a flat 'anvil' on the other. Always cut molding from the chrome side down. Trimming tips are included with each kit.
Q: I'm not a real "do-it-yourselfer", how detailed are the instructions?
A: Each kit comes with detailed installation instructions which include photos, along with installation and surface-prep tips. You'll be surprised that something that makes your car look this good, installs so easily.
Q: What kind of material are the chrome kits made from?
A: They are made from a flexible, automotive grade, 1/4-1/2 round, vinyl molding that has a chrome finish. The material has a high quality 3M adhesive on the back side, so no drilling is required for installation.
The Miata Vintage Chrome - 4 piece kit fits model years 1990-2005
|,|||-||CI-GREDDY-TURBO-NA6CE-TD0411|,||,|*CLEARANCE ITEM* Misc Greddy Turbo Kit Items Miata NA6CE TD0411|,|ci-greddy-turbo-na6ce-td0411|,|1,999.99|,|499.99|,||,||,|0.000 |,||,||,||,|Misc Greddy Turbo Kit Items Miata NA6CE TD0411
The check marks on the diagram shows what is available in this kit
#2, #3, #4, #5, #6, #7, #9, #10, #11, #13, #16, #18, #19, #20, #21, #22, #23-27, #30-37
*Only 1 available at this price, final sale
*Local Pick Up available in Irvine, CA
|,|||-||TR-MODAMD10MCHND15X6-5--|,||,|*CLEARANCE ITEM* Moda MD10 Machined w/Anthracite Accent 15x6.5|,|CL-MODAMD10MCHND|,|109.00|,|89.99|,||,||,||,||,||,||,|Moda MD10 Machined w/Anthracite Accent 15x6.5
* Size: 15x6.5
* Bolt Pattern: 4-100
|,|||-||MOMOHUBADAPTER|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* MOMO HUB ADAPTER 1990-2005 |,|MOM-5702|,|135.00|,|103.99|,||,||,|0.000 |,||,|cxewfae|,||,|MOMO HUB ADAPTER 1990-2005
MOMO Hub Adapter for your Mazda Miata 1990-2005
|,|||-||MXMIKEYCHBL|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|*CLEARANCE ITEM* MX-5 Miata Key Chain Black|,|KEY-KC1540-MIA|,|21.95|,|15.95|,||,||,|0.000 |,||,||,||,|MX-5 Miata Key Chain Black
Genuine black leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||MX-5-MIATA-KEY-CHAIN-BROWN|,|MIGIMOVIALL|,|*CLEARANCE ITEM* MX-5 Miata Key Chain Brown|,|AGI-KC1541-MIA|,|21.95|,|15.95|,||,||,|0.000 |,||,||,||,|MX-5 Miata Key Chain Brown
Genuine Brown leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||CI-PESHKNBAPOAL|,||,|*CLEARANCE ITEM* Personal Shift Knob - Ball - Polished Aluminum|,|ci-peshknbapoal|,|95.00|,|74.95|,||,||,||,||,||,||,|Personal Shift Knob - Ball - Polished Aluminum - Part # 3194.12.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Polished Aluminum
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||CI-MISPCLDIBYRA|,||,|*CLEARANCE ITEM* Racing Beat Mazda Miata Exedy Sport Race Clutch Disc 1990-2005 - including MazdaSpeed |,|ci-52524|,|239.99|,|205.95|,||,||,||,||,||,||,|Racing Beat Mazda Miata Exedy Sport Race Clutch Disc 1990-2005 - including MazdaSpeed
The Exedy Sport/Race Miata Clutch Disc (ZD09T) for the 1994-05 Miata (1.8 ltr engine, including MazdaSpeed) is manufactured using a sprung-hub riveted to a steel disc on which six sintered copper pads are bonded. This low-inertia disc is primarily intended for race use, but can be used for high performance non-turbo street applications.
This Miata clutch disc is intended for use with the stock pressure plate, or comparable. This disc be used as a replacement disc with the Exedy Stage II Complete (Thick) kits - PN 10903.
|,|"Select Year" "1990-1993" "1994-2005 add(+$30.00)"|-||-|||-||RACOTOPCAKIT|,|SOFTTOPNC|,|*CLEARANCE ITEM* RaggTopp Convertible Top Care Kit - CLOTH TOPS - Sale! |,|818-305|,|59.59|,|49.95|,||,||,|0.000 |,||,||,||,|
The first convertible top cleaning and protection system specifically for fabric material.
Clean, renew, protect, and beautify your fabric convertible top with this 2-step system.
The Haartz Corporation and Robbins Convertible Top Company, the world's leading manufacturers of convertible topping for virtually every American and European convertible automobile manufactured throughout the world, exclusively recommends using RaggTopp Cleaners and Protectants for protecting your investment against the elements of nature and man.
The RaggTopp Convertible Top Care Kit contains:
RaggTopp Vinyl/Fabric Cleaner- 16 oz. pump spray
Use confidently to safely clean convertible tops, sport utility tops, simcon tops and tonneau covers. RaggTopp Cleaner removes the toughest roof soils and stains, retards the growth of mildrew and will actually keep dirt and grease at bay. The anti-oxidant, low pH, no bleach formula leaves NO residue. The environmentally friendly & biodegradable formula will not harm autmotive finishes, chrome, rubber, glass, or plastic windows.
RaggTopp Fabric Protectant 14 oz. aerosol
RAGGTOPP Protectant is the future of convertible top protection. Over three years of product testing has produced a polymer formula that creates a superior protective barrier that micro-bonds to the convertible top and protects it from the elements of nature and man. Renews and extends the life of fabric convertible tops and covers by restoring lost water and stain reillency to like-factory-new condition. Protect and repel against acid rain, along with U.V. rays, smog, tree sap, bird droppings, salt, tar , dirt, grease, and grit.
Purchase Kit and SAVE!
|,|||-||RACOTOPCAKIT1|,|SOFTTOPNC|,|*CLEARANCE ITEM* RaggTopp Convertible Top Care Kit - VINYL TOPS - Sale! |,|818-304|,|49.99|,|39.95|,||,||,|0.000 |,||,||,||,|
RaggTopp Convertible Top Care Kit - VINYL TOPS
The first convertible top cleaning and protection system specifically for vinyl material.
Clean, renew, protect, and beautify your vinyl convertible top with this 2-step system.
The Haartz Corporation and Robbins Auto Top the world's leading manufacturers of convertible topping for virtually every American and European convertible automobile manufactured throughout the world, exclusively recommends using RaggTopp Cleaners and Protectants for protecting your investment against the elements of nature and man.
The RaggTopp Convertible Top Care Kit contains:
RaggTopp Vinyl/Fabric Cleaner- 16 oz. pump spray
Use confidently to safely clean convertible tops, sport utility tops, simcon tops and tonneau covers. RaggTopp Cleaner removes the toughest roof soils and stains, retards the growth of mildrew and will actually keep dirt and grease at bay. The anti-oxidant, low pH, no bleach formula leaves NO residue. The environmentally friendly & biodegradable formula will not harm autmotive finishes, chrome, rubber, glass, or plastic windows.
RaggTopp Vinyl Protectant- 16 oz. pump spray
Use RaggTopp Vinyl Protectant on vinyl convertible tops, car bras, and tonneau covers, as well as the rear window on all convertibles.
The rear plastic window on your convertible top is a specialized type of clear vinyl called "pressed poly." It contains two layers of non-colored vinyl laminated together under intense pressure and heat. This material is soft and easily scratches, absorbs a wide range of gasses, U.V. rays, liquids, acids and other environmental elements. It will yellow and become brittle in time if you do not maintain it properly. UV protection added in the manufacturing process become less effective each day.
|,|||-||RAVIPR16OZPU|,|SOFTTOPNC|,|*CLEARANCE ITEM* RaggTopp Fabric Protectant - 14 oz. - Sale! |,|RI-RTPT|,|35.99|,|24.99|,||,||,|0.000 |,||,||,||,|RaggTopp Fabric Protectant - 14 oz.
RAGGTOPP Protectant was especially developed for the true convertible top professional and enthusiast to protect and maintain their fabric, vinyl soft tops and plastic windows from harmful elements.
The number one factor in deteriorating convertible tops is acid rain, along with U.V. rays, smog, tree sap, bird droppings, salt, tar , dirt, grease, and grit.
RAGGTOPP Protectant is the future of convertible top protection. Over three years of product testing has produced a polymer formula that creates a superior protective barrier that micro-bonds to the convertible top and protects it from the elements of nature and man.
• Fluorocarbon Re-Water Repelling System
• Protects By Keeping Out the Elements of Nature and Man
• Renews and Extends the Life of Older Tops
• UV Protection with UV Stabilizers
• Contains NO SILICONE
• Will Not Harm Automotive Finishes, Chrome, Trim, Glass, Vinyl, Rubber or Plastic Windows
• Ozone Friendly to Meet California Air Quality Standards
|,|||-||RANAHOHACOTO|,|SOFTTOPNC|,|*CLEARANCE ITEM* RAGGTOPP Natural Horse Hair Convertible Top Brush - Sale! |,|085-590|,|19.99|,|13.50|,||,||,|0.000 |,||,||,||,|RAGGTOPP Natural Horse Hair Convertible Top Brush
Manufacturer recommended to safely clean fabric and vinyl convertible tops. Natural Horse Hair Brush is nonabrasive, naturally soft, durable and exclsively designed to gently remove exterior debris from favric and vinyl convertible topping.
For best results, use with RAGGTOPP Fabric or Vinyl Cleaner to safely clean and release soil and grime from convertible tops. Great to use on all fabric and vinyl Tonneau Covers.
|,|||-||RAGGTOPP-VINYL-FABRIC-CLEANER--16-OZ--PUMP-SPRAY|,||,|*CLEARANCE ITEM* RaggTopp Vinyl/Fabric Convertible Top Cleaner- 16 oz. pump spray|,|raggtopp-vinyl-fabric-cleaner--16-oz--pump-spray|,|22.99|,|17.95|,||,||,|0.000 |,||,||,||,|RaggTopp Vinyl/Fabric Cleaner- 16 oz. pump spray
RaggTopp Vinyl/Fabric Cleaner- 16 oz. pump spray Use confidently to safely clean convertible tops, sport utility tops, simcon tops and tonneau covers. RaggTopp Cleaner removes the toughest roof soils and stains, retards the growth of mildrew and will actually keep dirt and grease at bay. The anti-oxidant, low pH, no bleach formula leaves NO residue. The environmentally friendly & biodegradable formula will not harm autmotive finishes, chrome, rubber, glass, or plastic windows. - See more at: http://www.gomiata.com/racotopcakit1.html#sthash.mUrGQfdU.dpuf
|,|||-||906-054|,|NEW|,|*CLEARANCE ITEM* Replacement Bulb for Cobalt Low-Profile Headlight Kit - Sale! |,|906-054-MS|,|12.99|,|8.99|,||,||,||,||,||,||,|Replacement Bulb for Cobalt Low-Profile Headlight Kit
Replacement bulb for Low-Profile Headlamp System by Cobalt
|,|||-||50-67-7130|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Replacement Rear Window for NA, NB Hardtops 1990-2005|,|50-67-7130|,|699.00|,|495.00|,||,||,||,||,||,||,|Replacement Rear Window for NA, NB Hardtops 1990-2005
This is the new, full size Lexan window for the DGM new NA/NB (1990-2005) hardtops. Please note that this will NOT fit DGM hardtops manufactured prior to April 2017. .
This comes standard with all new STREET hardtops, but you may order one to convert your racing top to a street top, or order one as a replacement if your old one becomes damaged. This can be installed with double sided tape or a window sealant.
DG Motorsports Hardtop only
|,|"Shipping & Special Handling fee" "add(+$195)"|-||-|||-||RUNABOUT-S800-MIRRORS|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Runabout S800 Mirrors 1990-2005|,|runabout-s800-mirrors|,|359.05|,|268.02|,||,||,||,||,||,||,|Runabout S800 Mirrors 1990-2005
Upgrade your exterior and make other driver’s heads turn by installing chrome side mirrors from Runabout. Another high quality product from Japan, the cool, bullet-shaped S800 mirror set includes a pair of polished stainless steel mirrors and simple mounting tools. Installation takes about 20 minutes with no drilling needed. Available for NA Miata (1989-1997) models.
Price is for a pair of (2) mirrors
|,|"Select Year" "Select Here" "1990-1993" "1994-1997" "1999-2000" "2001-2005"|-||-|||-||ALI-SEATORGANIZER|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Seat Gap Car Organizer Storage Box and Cup Holder|,|ALI-Seatorganizer|,|49.99|,|38.02|,||,||,||,||,||,||,|Storage Box Car Organizer Seat Gap
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$38.02)"|-||-|"Select Color" "Select Here" "Black" "Red" "Tan"|-||-|||-||8BALLSHIFTKNOB|,|SPDARATRSE|,|*CLEARANCE ITEM* SPEED DAWG® RACING 8 Ball Shift Knob|,|SK008-TS|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING 8 Ball Shift Knob
TRADITIONAL SERIES. It doesn't get more 'Old School' than this. Authentic 8 Ball pool ball tapped for shifter use. 2-1/4" diameter. Weight is 6.3 oz. A free adapter kit is included. Made in the USA. Comes with a 30 day money back guarantee & a 1 year warranty.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||ACBATCHAR|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* TecMate OptiMATE 5 VoltMatic TM-223 Battery Saving Charger|,|818-215|,|149.99|,|109.02|,||,||,|0.000 |,||,||,||,|TecMate OptiMATE 5 VoltMatic TM-223 Battery Saving Charger
Want to keep your Miata battery charged at all times?
PRODUCT DETAILS:
Advanced 6V & 12V battery care for power sport / auto / marine size batteries! OptiMate 5 VoltMatic can SAVE & CHARGE an MAINTAIN all 6V & 12V lead-acid batteries. Simply connect the charger to the battery, the VoltMatic micro-processor automatically makes the correct charge voltage selection for a 6V battery in any condition or healthy 12V battery and then proceeds to charging. Charge current is regulated according to connected battery size and condition.
- 8-STEP program - STEP1: Low Volt Start (1V). STEP2: Voltmatic CHARGE selection. STEP3: Turbo SAVE. STEP4: Pulse SAVE. STEP5: Controlled CHARGE. STEP6: OPTIMIZE. Step 7: TEST after CHARGE. Step 8: OptiMate maintenance.
- Manual over-ride for very low voltage12V batteries is available.
- SAVE: Low Volt Start of 1V + 2-step desulphation recovery. CHARGING AMPS : 4A (6V) / 2.8A (12V) (Ampmatic).
- Model TM-223 IDEAL FOR: STD, AGM & GEL 6 & 12V batteries from 120Ah (up to 192Ah for 6V).
|,|||-||ORIGINALSHADE|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* THE ORIGINAL SHADE™ SUNSHADE for the Mazda MX-5 Miata - SALE!!!|,|TOS-SS017-40|,|59.99|,|49.95|,||,||,|0.000 |,||,||,||,|THE ORIGINAL SHADE™ SUNSHADE for the Mazda MX-5 Miata
THE ORIGINAL SHADE™ SUNSHADE is the world’s only fully retractable automotive window shade. It’s custom made for your vehicle’s specific make, model, and year for a precision fit and maximum sun protection.
THE ORIGINAL SHADE™ SUNSHADE is ready when you are; it mounts on the far right (passenger) side of your windshield and features smooth, one-handed operation for the ultimate in ease and convenience.
Installation takes only a few minutes with our easy-to-follow instructions and strong, durable brackets that attach to the windshield with heat-resistant 3M tape... there’s no folding, fumbling, or storage to worry about.
THE ORIGINAL SHADE™ SUNSHADE reduces temperatures in your vehicle by up to 60 degrees and has a thin 1 ¼’’ profile when fully retracted. It stays out of the way and ready for use.
Made from injection-molded heat resistant polymers, UV blocking fabric, and a patented design that has been refined and improved for over 15 years,
THE ORIGINAL SHADE™ SUNSHADE is the #1 accessory for a cooler car. And it's backed by a 2 Year Manufacturer Warranty.
Speacial Feature for THE ORIGINAL SHADE™ SUNSHADE are:
* Custom Made for Your Vehicle
* Fully Retractable
* Installs in Minutes
* Easy, One-Handed Operation
* No Folding, Rolling, or Storing
* Backed by a Hassle-Free 2 Year Warranty
SKU:
90-97 SS015-10-Year
99-05 SS017-40-Year
06-15 SS015-11-Year
* FINAL SALE, NO RETURNS OR EXCHANGES *
|,|"Miata Year" "Select Here" "1990-1997 (SS015-10-)" "1999-2005 (SS017-40-)" "2006-2015 (SS015-11-)"|-||-|"Sun Shade Style" "Select Here" "Peace Shade" "Aloha Shade" "Doodle Shade" "Original Silver Shade"|-||-|||-||TOPSITECA19|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Top Side Tension Cables - 1999-2005|,|CBL2960|,|67.00|,|49.02|,||,||,|0.000 |,||,||,||,|Top Side Tension Cables - 1999-2005
This is a pair of side tension cables that can be replaced when replacing your top.
Like most convertible tops, the Miata uses steel tension cables that are threaded into the pockets that run along the side windows.
You can check your existing cables easily. With the top up and windows open, run your fingers along the edge of the top until you feel the cable inside edge of the top. If it feels tight, then it can most likely be reused when you replace your old convertible top. If it is loose, then it still may just need to be retensioned during the installation of the new top or you may need a new set of spring loaded tension cables.
|,|||-||CM-NC-REAR-TRUNK-SPOILER-PRHT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* TRD Style Trunk Spoiler Mazda Miata PRHT 2006-2014|,|CMCF111|,|289.00|,|224.95|,||,||,|0.000 |,||,||,||,|TRD Style Trunk Spoiler Mazda Miata PRHT 2006-2014
*Please allow 2-3 weeks for production time and ship
Our second NC product! This spoiler only fits the NC WITH PRHT.
This carbon fiber trunk spoiler has been designed following the round and sexy lines of the MX-5 trunk and gives the back of your car a sporty and subtle racing touch.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Material" "Fiberglass" "Carbon Fiber add(+$99)"|-||-|"EMS Shipping Cost" "add(+$75)"|-||-|||-||WESSEALBAT|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|*CLEARANCE ITEM* Westco Mazda MX-5 Miata Battery 1990-2005 - SALE! |,|818-201|,|249.95|,|169.02|,||,||,|3.000 |,||,|sdfdssg|,||,|Westco Mazda MX-5 Miata Battery 1990-2005
Our Miata battery is manufactured by Westco and is the best replacement battery you can buy for your Miata.
A radically different, second generation sealed battery that uses the very latest absorbed glass mat technology, these advanced batteries have no free liquid electrolyte - unlike the current factory "flooded" battery which can leak in your trunk. Comes factory fresh, fully charged and ready to go!
The Miata Westco battery utilizes absorbed glass mat technology for approximately 30% more cranking amps than a stock battery.
With the Miata Westco battery,terminal location is OEM correct and installation is very easy.
This is one of our BEST SELLERS!
Go Miata had the best price on the Westco battery. Shipping cost reasonable. Prompt customer service on a question subsequent to the sale.
Rating: Excellent
Price Rating:Excellent
Shipping Options Rating:Excellent
Delivery Rating:Excellent
Ease of Purchase Rating:Excellent
Customer Service Rating:Excellent
- Chauvin, Batonrouge LA
|,|"Drop shipping and Special Protection fee:" "add(+$10)"|-||-|||-||CONTOPWEAT|,|CLEARANCE|,|*CLEARANCE ITEM*Genuine Mazda Miata OEM Convertible Top Weather Stripping 1990-2005 - SALE |,|909-620|,|215.72|,|164.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Convertible Top Weather Stripping - Sale!
If your seals are leaking or worn, you are probably noticing the wind noise, not to mention the water coming in that can ruin your interior. These genuine Mazda weatherstrips are 3 pieces per side and install easily.
Price is per side.
|,|"Select Year" "Select Here" "1990-1997" "1999-2005 add(+$39)"|-||-|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|||-||OEM-STEERING-LOWER-PANEL-NB|,|CLEARANCE|,|*CLEARANCE ITEM*Genuine Mazda Miata OEM Steering Wheel Under Panel 1999-2005|,|OEM-NC10-64-280F-02|,|179.52|,|132.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Steering Wheel Under Panel 1999-2005
#16 on Diagram Shown
*Color Black
|,|||-||MZ014-|,|19MAMIDRCLFL|,|*Sale* ACT Pressure Plate 1990-1993|,|ACT-MZ014|,|321.84|,|240.02|,||,||,||,||,||,||,|ACT MZ014 Pressure Plate 1990-1993
Description:
Pressure Plate Type: Heavy Duty
Engagement: Light to moderate pedal effort, positive engagement
Recommendation: Recommended for street and race use
MZ014 pressure plate features an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All ACT diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. The Heavy Duty pressure plates are recommended for use with a street or race disc.
Part Number: MZ014
Description: P/PL Heavy Duty
SFI: 1.1
Pressure Plate Type: Heavy Duty
Product Weight (lbs.): 7.9
For use with factory flywheel
|,|||-||MZ012|,|19MAMIDRCLFL|,|*Sale* ACT Pressure Plate 1990-2005|,|MZ012|,|315.99|,|250.00|,||,||,||,||,||,||,|ACT Pressure Plate 1990-2005
MZ012 pressure plate features an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All ACT diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Heavy Duty pressure plates increase clamp load by 20 to 50 percent. The Heavy Duty pressure plates are recommended for use with a street or race disc.
Pressure Plate Type: Heavy Duty
Engagement: Light to moderate pedal effort, positive engagement
Recommendation: Recommended for street and race use
Part Number: MZ012
Description: P/PL Heavy Duty
SFI: 1.1
Pressure Plate Type: Heavy Duty
Product Weight (lbs.): 8.5
|,|||-||MZ014X|,|19MAMIDRCLFL|,|*Sale* ACT Xtreme Pressure Plate 1990-1993|,|MZ014X|,|433.08|,|325.02|,||,||,||,||,||,||,|ACT Xtreme pressure plate 1990-1993
MZ014X is an ACT Xtreme pressure plate that uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Xtreme pressure plates increase clamp load by 50 to 120 percent. Xtreme pressure plates are recommended for use with a street or race disc.
Pressure Plate Type: Xtreme
Engagement: Moderate to heavy pedal effort, positive engagement
Recommendation: Recommended for street and race use
Part Number: MZ014X
Description: P/PL Xtreme
SFI: 1.1
Pressure Plate Type: Xtreme
Product Weight (lbs.): 8.0
Friction Surface Diameter (Inches): 7.9
Friction Surface Diameter (mm): 200
|,|||-||MZ012X|,|19MAMIDRCLFL|,|*Sale* ACT Xtreme Pressure Plate 1990-2005|,|MZ012X|,|415.05|,|322.00|,||,||,||,||,||,||,|ACT Xtreme Pressure Plate 1990-2005
MZ012X is an ACT Xtreme pressure plate that uses exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover stampings to provide rigidity and consistency. ACT's Xtreme pressure plates increase clamp load by 50 to 120 percent. Xtreme pressure plates are recommended for use with a street or race disc.
Pressure Plate Type: Xtreme
Engagement: Moderate to heavy pedal effort, positive engagement
Recommendation: Recommended for street and race use
Part Number: MZ012X
Description: P/PL Xtreme
SFI: 1.1
Pressure Plate Type: Xtreme
Product Weight (lbs.): 9.0
Friction Surface Diameter (Inches): 8.8
Friction Surface Diameter (mm): 224
|,|||-||AJDIBARTOLOMEO|,|OWNERS-SHOWCASE|,|A.J. DiBartolomeo
Massachusetts|,|newitem109911145|,||,||,||,||,||,||,||,||,|This is my 94' Miata MX-5 roadster I owned 3 1/2 years and dressed up a little with the help of Go Miata. The care is like new and is as dependable a vehicle I've ever owned.
Chromed doupled hoop rollbar, stainless grille, rear deck spoiler, chrome and s/s accents, boot holder, new rear window and top, walnut wood kit including shifter, e-brake and chromed vent rings. Carpeted floor rugs, wind deflectors and more than I can remember as I've bought all accessories from Go Miata and have never had a single complaint. Keep it up!!!
A.J. DiBartolomeo
Massachusetts
|,|||-||AARONHOYT|,|OWNERS-SHOWCASE|,|Aaron Hoyt|,|newitem74307309|,||,||,||,||,||,||,||,||,|This is my 1992 MX-5 "Black Miata". It is a C package car that came equipped with A/C and the viscous type limited slip differential. The car is stock except for a K/N filter and the Robbins Glass Window Black Convertible Top .
Aaron Hoyt,
92' Black
|,|||-||ABOUTUS|,||,|About Us|,||,||,||,||,||,||,||,|agasg|,||,|
Founded in 2001, we at GoMiata have a passion for the Mazda MX-5 Miata, and we share this passion by making our customers our #1 priority. That's why we are the nation's premier supplier of Mazda MX-5 Miata parts & accessories.
Go Miata is owned and managed by MX-5 Miata enthusiasts with over 25 years experience in the automotive aftermarket field. Go Miata was created out of love for the car, and the community of people who love and drive MX-5 Miatas. We are here for you, to make your ownership and driving experience even more special.
You can be assured that every product available on our website is something we personally selected to carry because we believe it’s a quality product and a worthwhile addition to your MX-5 Miata.
Thanks for taking the time to learn about us. We look forward to serving you as our customer.
|,|||-||ACUN|,|SHOP-BY-TOP-MIATA-BRANDS|,|Acessories Unlimited|,||,||,||,||,||,||,||,||,||,||,|||-||ACAUHECOIN|,|SHOP-BY-TOP-MIATA-BRANDS|,|Acme Auto Headlining Co. |,||,||,||,||,||,||,||,||,||,||,|||-||ACT|,|PARTS---PERFORMANCE-ENGINE-PERFORMANCE-2006-2009|,|ACT Clutch|,||,||,||,||,||,||,||,||,||,|
|,|||-||ACTMI4PADRAC1|,|MIREPA|,|ACT Miata 4 Pad Race Clutch (Heavy Duty) 1994-2005|,|ACT-ZM2-HDR4|,|623.00|,|485.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Race Clutch (Heavy Duty) 1994-2005
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing. Increased torque capacity. Fastest shifts, low inertia. Good durability but shortened spline life. Harsh engagement, chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 33% increase in clamping force over stock and can handle up to 298 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI4PADRAC3|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|ACT Miata 4 Pad Race Clutch Kit (Heavy Duty) 2006|,|ACT-ZM4-HDR4|,|663.00|,|515.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Race Clutch Kit (Heavy Duty) 2006
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing. Increased torque capacity. Fastest shifts, low inertia. Good durability but shortened spline life. Harsh engagement, chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 34% increase in clamping force over stock and can handle up to 343 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI4PADRAC|,|MIREPA|,|ACT Miata 4 Pad Race Clutch Kit (Xtreme) 1990-1993|,|ACT-ZM1-XTR4|,|684.08|,|518.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Race Clutch Kit (Xtreme) 1990-1993
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing. Increased torque capacity. Fastest shifts, low inertia. Good durability but shortened spline life. Harsh engagement, chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 72% increase in clamping force over stock and can handle up to 392 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI4PADRAC2|,|MIREPA|,|ACT Miata 4 Pad Race Clutch Kit (Xtreme) 1994-2005|,|ACT-ZM2-XTR4|,|697.00|,|540.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Race Clutch Kit (Xtreme) 1994-2005
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing. Increased torque capacity. Fastest shifts, low inertia. Good durability but shortened spline life. Harsh engagement, chatter.
The Advanced Clutch Technology Xtreme Race Clutch provides a 72% increase in clamping force over stock and can handle up to 392 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI4PADSPE|,|MIREPA|,|ACT Miata 4 Pad Spring Extreme Race Clutch Kit (Xtreme) 1990-1993|,|ACT-ZM1-XTG4|,|704.08|,|530.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Spring Extreme Race Clutch Kit (Xtreme) 1990-1993
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Spring Centered (4 Pad) Disc:
Recommended for Road Racing. Increased torque capacity and spline life. Good durability and spline life. Quiet operation, reduced driveline shock. Very harsh engagement, chatter.
The Advanced Clutch Technology Stage 1 Race spring Clutch provides a 100% increase in clamping force over stock and can handle up to 353 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI4PADSPH|,|MIREPA|,|ACT Miata 4 Pad Spring Heavy Duty Race Clutch Kit (Heavy Duty) 1990-1993|,|ACT-ZM1-HDG4|,|592.84|,|445.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Spring Heavy Duty Race Clutch Kit (Heavy Duty) 1990-1993
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Spring Centered (4 Pad) Disc:
Recommended for Road Racing, Increased torque capacity and spline life, Good durability and spline life, Quiet operation, reduced driveline shock, Very harsh engagement, chatter
The Advanced Clutch Technology Stage 1 Race spring Clutch provides a 45% increase in clamping force over stock and can handle up to 256 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI4PADSPH1|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|ACT Miata 4 Pad Spring Heavy Duty Race Clutch Kit (Heavy Duty) 2006|,|ACT-ZM4-HDG4|,|701.00|,|542.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Spring Heavy Duty Race Clutch Kit (Heavy Duty) 2006
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Spring Centered (4 Pad) Disc:
Recommended for Road Racing, Increased torque capacity and spline life, Good durability and spline life, Quiet operation, reduced driveline shock, Very harsh engagement, chatter
The Advanced Clutch Technology Stage 1 Race spring Clutch provides a 34% increase in clamping force over stock and can handle up to 343ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI4PADSPR1|,|MIREPA|,|ACT Miata 4 Pad Spring Race Clutch (Xtreme) 1994-2005|,|ACT-ZM2-XTG4|,|735.00|,|570.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Spring Race Clutch (Xtreme) 1994-2005
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%, Pedal feels moderate to stiff, Many SFI Certified to insure safety
Spring Centered (4 Pad) Disc
Recommended for Road Racing. Increased torque capacity and spline life. Good durability and spline life. Quiet operation, reduced driveline shock. Very harsh engagement, chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 72% increase in clamping force over stock and can handle up to 392 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI4PADSPR|,|MIREPA|,|ACT Miata 4 Pad Spring Race Clutch Kit (Heavy Duty) 1994-2005|,|ACT-ZM2-HDG4|,|661.00|,|512.02|,||,||,|5.000 |,||,||,||,|ACT Miata 4 Pad Spring Race Clutch Kit (Heavy Duty) 1994-2005
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Spring Centered (4 Pad) Disc:
Recommended for Road Racing. Increased torque capacity and spline life. Good durability and spline life. Quiet operation, reduced driveline shock. Very harsh engagement, chatter.
The Advanced Clutch Technology Heavy Duty Race Clutch provides a 33% increase in clamping force over stock and can handle up to 298 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADRAC1|,|MIREPA|,|ACT Miata 6 Pad Race Clutch Kit (Heavy Duty) 1994-2005|,|ACT-ZM2-HDR6|,|655.00|,|495.02|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Race Clutch Kit (Heavy Duty) 1994-2005
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Solid Hub (6 Pad) Disc:
Increased torque capacity. Faster shifts, reduced inertia. Very good durability but shortened spline life. Absorbs more heat than 4 pad. Harsh engagement, some chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 33% increase in clamping force over stock and can handle up to 298 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADRAC3|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|ACT Miata 6 Pad Race Clutch Kit (Heavy Duty) 2006|,|ACT-ZM4-HDR6|,|695.00|,|539.02|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Race Clutch Kit (Heavy Duty) 2006
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Solid Hub (6 Pad) Disc:
Increased torque capacity. Faster shifts. Reduced inertia. Very good durability but shortened spline life. Absorbs more heat than 4 pad. Harsh engagement, some chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 34% increase in clamping force over stock and can handle up to 343 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADRAC|,|MIREPA|,|ACT Miata 6 Pad Race Clutch Kit (Xtreme) 1990-1993|,|ACT-ZM1-XTG6|,|739.08|,|560.99|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Race Clutch Kit (Xtreme) 1990-1993
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street. Increased torque capacity and spline life. Very good durability and good spline life. Quiet operation, reduced driveline shock.
The Advanced Clutch Technology Xtreme Race Clutch provides a 100% increase in clamping force over stock and can handle up to 353 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADRAC2|,|MIREPA|,|ACT Miata 6 Pad Race Clutch Kit (Xtreme) 1994-2005|,|ACT-ZM2-XTR6|,|729.00|,|565.02|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Race Clutch Kit (Xtreme) 1994-2005
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Solid Hub (6 Pad) Disc:
Increased torque capacity. Faster shifts, reduced inertia. Very good durability but shortened spline life. Absorbs more heat than 4 pad. Harsh engagement, some chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 72% increase in clamping force over stock and can handle up to 392 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADSPR|,|MIREPA|,|ACT Miata 6 Pad Spring Race Clutch Kit (Heavy Duty) 1990-1993|,|ACT-ZM1-HDG6|,|627.84|,|477.16|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Spring Race Clutch Kit (Heavy Duty) 1990-1993
Heavy Duty Pressure Plate
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street. Increased torque capacity and spline life. Very good durability and good spline life. Quiet operation, reduced driveline shock.
The Advanced Clutch Technology Heavy Duty Race Clutch provides a 45% increase in clamping force over stock and can handle up to 256 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADSPR1|,|MIREPA|,|ACT Miata 6 Pad Spring Race Clutch Kit (Heavy Duty) 1994-2005|,|ACT-ZM2-HDG6|,|693.00|,|535.02|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Spring Race Clutch Kit (Heavy Duty) 1994-2005
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street. Increased torque capacity and spline life. Very good durability and good spline life. Quiet operation, reduced driveline shock.
The Advanced Clutch Technology Heavy Duty Race Clutch provides a 33% increase in clamping force over stock and can handle up to 298 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADSPR3|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|ACT Miata 6 Pad Spring Race Clutch Kit (Heavy Duty) 2006|,|ACT-ZM4-HDG6|,|733.00|,|569.02|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Spring Race Clutch Kit (Heavy Duty) 2006
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street. Increased torque capacity and spline life. Very good durability and good spline life. Quiet operation, reduced driveline shock.
The Advanced Clutch Technology Heavy Duty Race Clutch provides a 34% increase in clamping force over stock and can handle up to 343 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADSPR2|,|MIREPA|,|ACT Miata 6 Pad Spring Race Clutch Kit (Xtreme) 1994-2005|,|ACT-ZM2-XTG6|,|767.00|,|595.02|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Spring Race Clutch Kit (Xtreme) 1994-2005
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street. Increased torque capacity and spline life. Very good durability and good spline life. Quiet operation, reduced driveline shock.
The Advanced Clutch Technology Xtreme Race Clutch provides a 72% increase in clamping force over stock and can handle up to 392 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMI6PADSPR4|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|ACT Miata 6 Pad Spring Race Clutch Kit (Xtreme) 2006|,|ACT-ZM4-XTG6|,|773.00|,|689.99|,||,||,|5.000 |,||,||,||,|ACT Miata 6 Pad Spring Race Clutch Kit (Xtreme) 2006
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Spring Centered (6 Pad) Disc:
Recommended for Road Racing and high power Street. Increased torque capacity and spline life. Very good durability and good spline life. Quiet operation, reduced driveline shock.
The Advanced Clutch Technology Xtreme Race Clutch provides a 75% increase in clamping force over stock and can handle up to 432 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMIPE4PADR|,|MIREPA|,|ACT Miata Performance 4 Pad Race Clutch Kit (Heavy Duty) 1990-1993|,|ACT-ZM1-HDR4|,|572.84|,|433.02|,||,||,|5.000 |,||,||,||,|ACT Miata Performance 4 Pad Race Clutch Kit (Heavy Duty) 1990-1993
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Solid Hub (4 Pad) Disc:
Recommended for Drag and Road Racing. Increased torque capacity. Fastest shifts, low inertia. Good durability but shortened spline life. Harsh engagement, chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 45% increase in clamping force over stock and can handle up to 256 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMIPE6PADR|,|MIREPA|,|ACT Miata Performance 6 Pad Race Clutch Kit (Heavy Duty) 1990-1993|,|ACT-ZM1-HDR6|,|604.84|,|455.02|,||,||,|5.000 |,||,||,||,|ACT Miata Performance 6 Pad Race Clutch Kit (Heavy Duty) 1990-1993
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Solid Hub (6 Pad) Disc:
Increased torque capacity. Faster shifts. Reduced inertia. Very good durability but shortened spline life. Absorbs more heat than 4 pad. Harsh engagement, some chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 45% increase in clamping force over stock and can handle up to 256 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMIPE6PADR1|,|MIREPA|,|ACT Miata Performance 6 Pad Race Clutch Kit (Xtreme) 1990-1993|,|ACT-ZM1-XTR6|,|716.08|,|540.02|,||,||,|5.000 |,||,||,||,|ACT Miata Performance 6 Pad Race Clutch Kit (Xtreme) 1990-1993
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Solid Hub (6 Pad) Disc:
Increased torque capacity. Faster shifts. Reduced inertia. Very good durability but shortened spline life. Absorbs more heat than 4 pad. Harsh engagement, some chatter.
The Advanced Clutch Technology Stage 1 Race Clutch provides a 100% increase in clamping force over stock and can handle up to 353 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMIPE6PADR2|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|ACT Miata Performance 6 Pad Race Clutch Kit (Xtreme) 2006|,|ACT-ZM4-XTR6|,|701.00|,|542.02|,||,||,|5.000 |,||,||,||,|ACT Miata Performance 6 Pad Race Clutch Kit (Xtreme) 2006
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Solid Hub (6 Pad) Disc:
Increased torque capacity. Faster shifts. Reduced inertia. Very good durability but shortened spline life. Absorbs more heat than 4 pad. Harsh engagement, some chatter.
The Advanced Clutch Technology Xtreme Race Clutch provides a 75% increase in clamping force over stock and can handle up to 432 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTCLUTKITST2|,|MIREPA|,|ACT Miata Performance Clutch Kit (Heavy Duty) 1990-1993 |,|ACT-ZM1-HDSS|,|560.84|,|425.99|,||,||,|5.000 |,||,|adgasdg|,||,|
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Modified Disc:
Recommended for Street or occasional Race. Quicker engagement. Quiet operation. Improved friction material and/or hub strength.
The Advanced Clutch Technology Stage 1 Clutch provides a 45% increase in clamping force over stock and can handle up to 200 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTCLUTKITST|,|MIREPA|,|ACT Miata Performance Clutch Kit (Xtreme) 1990-1993|,|ACT-ZM1-XTSS|,|672.08|,|509.99|,||,||,|5.000 |,||,|sdfgsdfg|,||,|ACT Miata Performance Clutch Kit (Xtreme) 1990-1993
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Modified Disc:
Recommended for Street or occasional Race. Quicker engagement. Quiet operation. Improved friction material and/or hub strength.
The Advanced Clutch Technology Stage 2 Clutch provides a 100% increase in clamping force over stock and can handle up to 277 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you have a seriously modified Miata with a turbo or high boost supercharger, this clutch is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMIPECLKIT|,|MIREPA|,|ACT Miata Performance Clutch Kit (Heavy Duty) 1994-2005 |,|ACT-ZM2-HDSS|,|630.00|,|475.02|,||,||,|5.000 |,||,||,||,|ACT Miata Performance Clutch Kit (Heavy Duty) 1994-2005
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Performance Disc:
Recommended for Street and Race. Quicker engagement. Quiet operation. Best organic friction material. Improved hub and burst strength.
The Advanced Clutch Technology Stage 1 Clutch provides a 33% increase in clamping force over stock and can handle up to 233 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMIPECLKIT2|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|ACT Miata Performance Clutch Kit (Heavy Duty) 2006|,|ACT-ZM4-HDSS|,|670.00|,|520.02|,||,||,|5.000 |,||,||,||,|ACT Miata Performance Clutch Kit (Heavy Duty) 2006
Heavy Duty Pressure Plate:
Clamps load increase of 20% to 50%. Pedal feels stock to moderate. Many SFI Certified to insure safety.
Performance Disc:
Recommended for Street and Race. Quicker engagement. Quiet operation. Best organic friction material. Improved hub and burst strength.
The Advanced Clutch Technology Stage 1 Clutch provides a 34% increase in clamping force over stock and can handle up to 268 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMIPECLKIT1|,|MIREPA|,|ACT Miata Performance Clutch Kit (Xtreme) 1994-2005 - SALE!!!|,|ACT-ZM2-XTSS|,|704.00|,|548.02|,||,||,|5.000 |,||,||,||,|ACT Miata Performance Clutch Kit (Xtreme) 1994-2005 - SALE!!!
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Performance Disc:
Recommended for Street and Race. Quicker engagement. Quiet operation. Best organic friction material, improved hub and burst strength.
The Advanced Clutch Technology Stage 1 Clutch provides a 72% increase in clamping force over stock and can handle up to 307 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ACTMIPECLKIT3|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|ACT Miata Performance Clutch Kit (Xtreme) 2006|,|ACT-ZM4-XTSS|,|722.00|,|594.02|,||,||,|5.000 |,||,||,||,|ACT Miata Performance Clutch Kit (Xtreme) 2006
Xtreme Pressure Plate:
Clamps load increase of 50% to 120%. Pedal feels moderate to stiff. Many SFI Certified to insure safety.
Performance Disc:
Recommended for Street and Race. Quicker engagement. Quiet operation. Best organic friction material, improved hub and burst strength.
The Advanced Clutch Technology Stage 1 Clutch provides a 75% increase in clamping force over stock and can handle up to 334 ft/lbs of torque! ACT clutches provide long life and fast, clean shifting. If you want the finest clutch for your Miata, ACT is the way to go.
The ACT kit comes complete with the pressure plate, disc, pilot bearing and alignment tool. Everything you need to connect serious power to your wheels!
|,|||-||ADPHCLTOEN|,||,|Additional Photo - Click to Enlarge|,|adphcltoen|,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-AEM|,|SHOP-BY-TOP-MIATA-BRANDS|,|AEM|,||,||,||,||,||,||,||,||,||,||,|||-||AEMDRYREFI|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|AEM Dryflow Synthetic Air Filter|,|21-202D-HK|,|79.99|,|69.02|,||,||,|0.000 |,||,||,||,|AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration. Replacement air filters for street vehicles come with a lifetime limited warranty. Other air filters come with a one year limited warranty.
- Designed to increase horsepower and throttle response
- AEM Air Filters are cleanable and reusable for the life of your vehicle
- Captures up to 99% of harmful contaminants
- Outstanding performance even in dusty racing conditions
- Manufactured in the USA
- Does not require oil
- Will NOT void vehicle warranty
- Lifetime limited warranty
|,|||-||AEMPEIN20MA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|AEM Performance Intake 2004-2005 Mazda Miata MAZDASPEED|,|AEM-22-489P|,|599.95|,|478.02|,||,||,|0.000 |,||,||,||,|AEM Performance Intake 2004-2005 MAZDASPEED
AEM Intake Systems are designed to produce massive horsepower and torque gains as well as better engine sound when used as a replacement for the factory airbox and air filter. AEM intake systems are designed, tuned, and dyno-tested to fit specific cars and trucks. These kits usually include an oversized AEM Dryflow synthetic washable air filter for optimum air flow, filtration, and performance while allowing easy oil-free cleaning. Most AEM intake systems use mandrel-bent aluminum intake tubes, powder coated heat shields, and high quality hardware designed to reduce restriction and reduce intake temperature. The design and components of each intake system vary so consult the installation instructions for more information on the contents of each part number. AEM manufactures a variety of intake kit styles including short ram intakes, cold air intakes, dual-chamber intakes, Brute Force intakes for trucks and SUV's, and Brute Force HD intakes for diesel applications.
Product Style: AEM Short Ram Intake System
Color: Polished
Replacement Filter: 21-202D-HK
Street Legal In All States: Yes
TUV Approved (Europe): No
Weight: 6 lb (2.7 kg)
Product Box Length: 18.25 in (464 mm)
Product Box Width: 14.5 in (368 mm)
Product Box Height: 8.5 in (216 mm)
|,|||-||AGENCY-POWER-FRONT-STRUT-BAR-MAZDA-MIATA-2004-2014|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Agency Power Front Strut Bar Mazda Miata 2004-2014|,|AP-MX5-250|,|130.00|,|99.55|,||,||,||,||,||,||,|Agency Power Front Strut Bar Mazda Miata 2004-2014
A common upgrade among tuners and track enthusiasts alike is a front strut bar. A strut bar mounts between opposing strut towers and reduces the flex that these towers experience during hard cornering. Reducing the flex will keep the wheels in position keeping the tires in the desired position on the road. This will help to improve traction on the turns, increasing turn-in response. A front strut bar will help to reduce under steer and a bar in the rear will help to reduce over steer. We have designed our strut bar to not only look good, but function as well. The Agency Power front strut bar provides just enough flex, without compromising stability.
Features:
- Direct Bolt-on Application
- Made from 6061 Aluminum
- Improves Handling and Cornering
- Improve Traction
- Improves Engine Bay Looks
- Red and Gray Powder Coated Finish
- Two Year Warranty
Fitment:
- Mazda Miata MX-5 2006-2014
|,|"Shipping and Handling" "add(+$35.00)"|-||-|||-||AILO20ST1|,||,|Air/Fuel Log: 2001 stage 1|,||,||,||,||,||,||,||,||,||,||,|||-||AIFL9MOCLTOE|,||,|Airbag Flap (94+ Models) - Click to Enlarge|,|aifl9mocltoe|,||,||,||,||,||,||,||,||,||,|||-||ALSTYLTAILLA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Altezza Clear Miata Tail Lamps 1990-1997 - SALE!|,|509-335|,|329.99|,|189.95|,||,||,|0.000 |,||,||,||,|
These Altezza rear tailights will give your Miata a great look that will truly set it apart. The car in the photo is our company Miata, and we get compliments on these lights all the time.
Try a set on your Miata and you won't be dissapointed. These are the real deal with incredible craftsmanship. Don't settle for cheap imitations.
DOT Approved
Price is for the pair. Easy installation in less than 30 minutes. At this time, they are only available for the 90-97 Miata.
Click on the photo for a larger view
|,|||-||909-321|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2006-2012|,|Amerex 2.5lb Halotron Extinguisher and Bracket Kit|,|909-321|,|299.00|,|245.90|,||,||,||,||,||,||,|Amerex 2.5lb Halotron Extinguisher and Bracket Kit
Fire extinguisher kit for the ND Miata includes:
* Well-designed bracket that can be mounted on either the passenger or driver's side using factory seat bolt locations
* 2.5 Lbs. Halotron Fire extinguisher
* All hardware and quick-release latches
* Multiple mounting holes so you can choose extinguisher position based on your seat position
|,|||-||ANDREW123|,||,|ANDREW GWIN SENIOR SALES LEAD Andrew@GoMiata.com|,||,||,||,||,||,||,||,||,||,||,|||-||ANGWOUSARE|,||,|ANDREW GWIN
SENIOR SALES LEAD
Andrew@GoMiata.com|,||,||,||,||,||,||,||,||,||,||,|Andrew Gwin: Outside Sales Rep.|-||-|||-||ANFLANDLI|,|BLACKFRIDAYSALE|,|Another Flips and Lives...|,|Another-Flips-and-Lives|,|1,000,000.00|,||,||,||,|0.000 |,||,||,||,|A picture worth a thousand words...
As you can see from this picture, the roll bar also saved this Miata owner's life. The windshield is completely flattened, and the only thing that kept the driver from being killed instantly was his Hard Dog Roll Bar.
Please protect yourself!
Make the investment in a Roll Bar today.
|,|||-||CS-AB030|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2016|,|Antenna GoPro, CAMERA Mount|,|CS-AB030|,|32.99|,|29.98|,||,||,||,||,||,||,|Antenna GoPro, CAMERA Mount
Cravenspeed started with their popular Stubby Antenna and made it into an awesome GoPro camera mount. Just unscrew your antenna, and screw in the GoPro mount. It uses a ball style tripod mounts, so adjusting the camera angle is easy. Just loosen the knob and you can put your camera at any position you want. Mount is machined from solid aluminum and anodized black. Your camera will never fall off like it can with a worn suction cup mount, and the mount will never rust or break. Simple, secure, and adjustable Safer than any suction cup mount Strong, durable, and will last forever
|,|||-||APRPERFORMANCE|,|SHOP-BY-TOP-MIATA-BRANDS|,|APR PERFORMANCE|,||,||,||,||,||,||,||,||,||,||,|||-||ASAJS5WHTIPA|,||,|ASA JS5 Complete Wheel & Tire Package 15"|,|WASAPK15|,|1,146.00|,|975.95|,||,||,|80.000 |,||,|fdgdfgadfg|,||,|Complete wheel and tire package! 4 15" ASA JS5 wheels mounted and balanced with 4 Kumho ECSTA 712 205-50/15 tires! Ready to bolt on!
|,|||-||ATE-TYP200-BRAKE-FLUID-1LITER|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|ATE TYP200 Brake Fluid 1Liter|,|500-20002|,|30.45|,||,||,||,||,||,||,||,|ATE TYP200 Brake Fluid 1 Liter
ATE TYP200 Brake Fluid is designed to excel within the extreme demands made on a race vehicle or by high performance drivers and exceeds all DOT 4 standards. It is compatible with and will mix well with most DOT3, DOT4 or DOT 5.1 fluids.
The formula offers a minimal drop in boiling point due to outstanding water binding properties resulting in a long-lasting fluid that may not need to be changed for up to 3 years under normal highway driving conditions. Products with a lower wet boiling point have to be replaced considerably more often (e.g., DOT3 products should be replaced annually). The overall high dry and wet boiling points make this fluid an excellent choice for street driven vehicles, too, where brake fluid is flushed less frequently than that in race-driven vehicles.
|,|||-||AUTOMOTIVEGOLD|,|SHOP-BY-TOP-MIATA-BRANDS|,|Au-TOMOTIVE GOLD|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-AUTO-XPRESSIONS|,|SHOP-BY-TOP-MIATA-BRANDS|,|Auto Xpressions|,||,||,||,||,||,||,||,||,||,||,|||-||AUTOGLYM|,|SHOP-BY-TOP-MIATA-BRANDS|,|Autoglym|,||,||,||,||,||,||,||,||,||,||,|||-||AUBOSHCO50|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Autoglym Bodywork Shampoo & Conditioner 500ml|,|BHNC-BSC500US|,|19.99|,|13.99|,||,||,|0.000 |,||,||,||,|Autoglym Bodywork Shampoo & Conditioner 500ml
* Super concentrated wash and wax with rust inhibitors.
* Gently lifts traffic film without harming finish.
* Preserves finish and shine for months.
* Will not remove or degrade vehicles protective wax layer.
* 500 ml. or 16.09 oz.
* Electro-molecular attraction forms a glossy, water-repellent barrier.
|,|||-||AUCUWHCL|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Autoglym Custom Wheel Cleaner|,|BHNC-CWC500US|,|21.99|,|16.55|,||,||,|0.000 |,||,||,||,|Autoglym Custom Wheel Cleaner
* A special blend of biodegradable surfactants, solvents, & alkalis.
* Acid free formula rapidly dissolves brake dust, corrosion, and traffic film.
* Safe for use on all types of wheels (including chrome, polished aluminum, and anodized)
* 500 ml. or 16.09 oz.
|,|||-||AUHIDEWAX150|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Autoglym High Definition Wax 150 g|,|BHNC-HDWAXUS|,|65.99|,|57.05|,||,||,|0.000 |,||,||,||,|Autoglym High Definition Wax 150 g
* Provides a luster and depth of shine normally associated with the most expensive hand built cars.
* Contains carefully blended polymers and waxes, including Carnauba Wax.
* Treated surface will display very high gloss.
* Extremely durable and will resist contaminants such as salt, UV rays, and acid rain for extended periods of time.
* Special blend allows entire car to be waxed at once with extremely easy, non-greasy removal.
* 150 gm or 5.3 oz.
|,|||-||AUINTYDR150G|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Autoglym Instant Tyre Dressing 500ml|,|BHNC-ITD500US|,|19.99|,|9.35|,||,||,|0.000 |,||,||,||,|Autoglym Instant Tyre Dressing 500ml
* Enhances & protects tires with a natural finish.
* Contains durable polymer silicone protectants.
* Transforms weathered tires & makes them look brand new.
* 500 ml. or 16.09 oz.
|,|||-||AUPEPAAP|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Autoglym Perfect Palm Applicator|,|BHNC-PPARED4|,|14.99|,|11.99|,||,||,|0.000 |,||,||,||,|Autoglym Perfect Palm Applicator
DISCONTINUED
* Ergonomically designed to enhance performance.
* Reduces effort to apply product, thus reducing arm fatigue.
* Ideal for use with Super Resin Polish & Instant Tyre Dressing.
* Completely removes the necessity to grip the pad.
* Protects hands from chemicals and the vehicle.
* Allows for precise edging of application.
* Can be used with left or right hand, and is washable.
|,|||-||AURADE50|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Autoglym Rapid Detailer 500ml|,|BHNC-RD500US|,|19.99|,|15.99|,||,||,|0.000 |,||,||,||,| Rapid Detailer
* Instantly refreshes shine & prolongs water beading.
* Can be used everyday between regular washing to add further protection to a waxed vehicle.
* Safe for all paint types.
* Produces a deep, lasting shine with excellent water repellency
* 500 ml. or 16.09 oz.
|,|||-||AUSUREPO50|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Autoglym Super Resin Polish 500ml|,|BHNC-SRP500US|,|29.99|,|19.99|,||,||,|0.000 |,||,||,||,| Super Resin Polish
* Ultimate cleaner, polish, and sealant.
* Removes surface contaminants.
* Imparts a tough, glossy protective barrier.
* Extremely easy to apply and remove.
* Ideal for all paint types and colors.
* The #1 selling polish in the United Kingdom.
* 500 ml. or 16.09 oz.
|,|||-||AUVIRUCA50|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Autoglym Vinyl & Rubber Care 500ml|,|BHNC-VRC500US|,|19.49|,|13.99|,||,||,|0.000 |,||,||,||,| Vinyl & Rubber Care
* Conditions & protects interior surfaces.
* Forms a tough, but flexible anti-static barrier against moisture, dust, staining, & fading.
* Use on dashboards, instruments panels. pvc, door & seat facings, door shuts, and engine components.
* 500 ml. or 16.09 oz.
|,|||-||BGSUSY|,|SHOP-BY-TOP-MIATA-BRANDS|,|B&G Suspension Systems|,||,||,||,||,||,||,||,||,||,||,|||-||SK-300BC-1|,|20MAMIINKN|,|Ball Black Carbon Fiber 6 Speed Pattern - Universal|,|SK-300BC-1|,|52.99|,|48.99|,||,||,|0.000 |,||,||,||,|Ball Black Carbon Fiber 6 Speed Pattern - Universal
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-300BC-1-W|,|20MAMIINKN|,|Ball Black Carbon Fiber Heavy Weight 6 Speed Pattern - Universal 1.1LBS/480g|,|SK-300BC-1-W|,|64.99|,|58.99|,||,||,|0.000 |,||,||,||,|Ball Black Carbon Fiber Heavy Weight 6 Speed Pattern - Universal 1.1LBS/480g
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-300MC-W|,|20MAMIINKN|,|Ball Multi-Color Heavy Weight 5 Speed Pattern Universal 1.1LBS/480g|,|SK-300MC-W|,|64.99|,|58.99|,||,||,|0.000 |,||,||,||,|Ball Multi-Color Heavy Weight 5 Speed Pattern Universal 1.1LBS/480g
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-300C-GD-W|,|20MAMIINKN|,|Ball Style Chrome Gold Heavy Weight Universal 1.1LBS/480g|,|SK-300C-GD-W|,|64.99|,|58.99|,||,||,|0.000 |,||,||,||,|Ball Style Chrome Gold Heavy Weight Universal 1.1LBS/480g
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-300CH-W|,|20MAMIINKN|,|Ball Style Chrome Silver Heavy Weight Universal 1.1LBS/480g|,|SK-300CH-W|,|64.99|,|58.99|,||,||,|0.000 |,||,||,||,|Ball Style Chrome Silver Heavy Weight Universal 1.1LBS/480g
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-300GP|,|20MAMIINKN|,|Ball Style Green/Purple - Universal|,|SK-300GP|,|52.99|,|48.99|,||,||,|0.000 |,||,||,||,|Ball Style Green/Purple - Universal
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-300GP-1-W|,|20MAMIINKN|,|Ball Style Green/Purple Heavy Weight 6 Speed Universal 1.1LBS/480g|,|SK-300GP-1-W|,|64.99|,|58.99|,||,||,|0.000 |,||,||,||,|Ball Style Green/Purple Heavy Weight 6 Speed Universal 1.1LBS/480g
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||SK-300WH-W|,|20MAMIINKN|,|Ball Style Solid White Heavy Weight Universal 1.1LBS/480g|,|SK-300WH-W|,|65.99|,|58.99|,||,||,|0.000 |,||,||,||,|Ball Style Solid White Heavy Weight Universal 1.1LBS/480g
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||BARRYCHAFIN|,|OWNERS-SHOWCASE|,|Barry Chafin|,|barrychafin|,||,||,||,||,||,||,|asdfasf|,||,|This 95 Miata with Preferred Equipment Package (PEP) began it's second life @ 160,000 miles. Purchased in October 2003, the intent was to own a car which served double duty, first as a daily driver and then for autocross competition. With the multi-purpose goal in mind we focused on a limited set of performance / convenience modifications allowing us to enjoy both those casual sunny day drives meandering through the Wine Country as well as all out assaults on the cones.
To top off the project we choose the Go Miata Strut Tower brace tuning out some of the noise, harshness and vibration. The Go Miata brace fits without issue, even with this car's PEP included Cruise Control. We've got a couple more Go Miata parts in mind and we'll get to them just as soon as we can park our beloved friend long enough to fill out the order form.
Barry Chafin
95' Black
|,|||-||BBSRGSI15|,|BBSWHEELS|,|BBS RG-F Silver 15x7|,|TR-BBSRGFSLV15x7|,|621.99|,|539.95|,||,||,|5.000 |,||,||,||,|BBS RG-F Silver 15x7
* Size: 15x7
* Offset: 42mm
* Backspacing: 5.75"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 10.2lbs
* Finish: Silver
* Construction: 1pc. Forged
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$45)"|-||-|||-||BBSRGSI16|,|BBS-WHEELS-2006-2015|,|BBS RG-F Silver 16x7|,|TR-BBSRGFSLV16x7|,|695.99|,|595.99|,||,||,|0.000 |,||,||,||,|BBS RG-F Silver 16x7
* Size: 16x7
* Offset: 35mm
* Backspacing: 5.41"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 10.2lbs
* Finish: Silver
* Construction: 1pc. Forged
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$45)"|-||-|||-||BBSRGRDIBL17|,|BBS-WHEELS-2006-2015|,|BBS RGR Diamond Black 17x7|,|TR-BBSRGRBLK17x7|,|665.99|,|589.99|,||,||,|5.000 |,||,||,||,|BBS RGR Diamond Black 17x7
* Size: 17x7
* Offset: 38mm
* Backspacing: 5.55"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 16.3lbs
* Finish: Diamond Black
* Construction: 1pc. Forged
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||BBSRGRSI17|,|BBS-WHEELS-2006-2015|,|BBS RGR Silver 17x7|,|TR-BBSRGRSLV17x7|,|665.99|,|589.99|,||,||,|5.000 |,||,||,||,|BBS RGR Silver 17x7
* Size: 17x7
* Offset: +38mm
* Backspacing: 5.55"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 16.3lbs
* Finish: Bright Silver
* Construction: 1pc. Fully Forged
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||BBS-SR-17X7-5-5X114-3-ET42-SATIN-GREY-WHEELS--82MM-PFS-CLIP-REQUIRED|,|BBS-WHEELS-2006-2015|,|BBS SR 17x7.5 5x114.3 ET42 Satin Grey Wheels - 82mm PFS/Clip Required|,|BBSSR008SG|,||,|204.95|,||,||,||,||,||,||,|BBS SR 17x7.5 5x114.3 ET42 Satin Grey Wheels - 82mm PFS/Clip Required
Size: 17x7.5
Offset: 42 mm.
Bolt Pattern: 5x114.3
Weight: 27 lbs. Each
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||BBS-WHEELS-2006-2015|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|BBS Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||BBSWHEELS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|BBS Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-BEATRUSH|,|SHOP-BY-TOP-MIATA-BRANDS|,|Beatrush|,||,||,||,||,||,||,||,||,||,||,|||-||REV-010720|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Beatrush Rear Strut Tower Bar 2016-2020+|,|REV-010720|,|306.80|,|224.98|,||,||,||,||,||,||,|Beatrush Rear Strut Tower Bar 2016-2020+
-Increase your Miatas cornering capabilities
-Bolt on installation
-Strong aluminum shaft for maximum stiffness
-Only available for the ND (2016+) Miata
Rear strut bar by Beatrush for the ND (2016+) MX-5. This part is a great way of providing even more balance and cornering ability to your Miata. Beatrush uses aluminum oval tubes with aluminum brackets for a lightweight yet strong part. Ideal for all Miatas whether highly modified or stock.
Note:
Trimming of the trunk liner is required for installation.
Due to the limited working space and awkward angles during installation, the use of shorter tools are recommended.
|,|"EMS Air Mail" "add(+$69)"|-||-|||-||BEGI|,|SHOP-BY-TOP-MIATA-BRANDS|,|Begi|,||,||,||,||,||,||,||,||,||,||,|||-||BES4MITUSY19|,|ENPE19|,|Begi S4 Miata Turbo System 1990-2005|,|BEGI-S4|,|4,500.00|,|4,250.00|,||,||,|25.000 |,||,||,||,|The BEGi Turbo System features components not found in any other systems. The most obvious parts are the scooper, radiator cover, and the cool air box. The power improvements come from the new downpipe, larger intercooler, and exhaust manifold improvements unprecedented in turbocharging. The downpipe is 100% stainless steel, and features a new power improving design. Many of the power improvements are evident in the details. Temperature reductions through out the system have also received special attention. The water and oil lines to the turbo are more heat tolerant, well beyond the requirements. The system also features t-bolt hose clamps on the boost tubes. The larger intercooler has sheet metal end tanks with a bar and plate core. The kit comes with black powder coated tubes, and black turbo hose.
Many of the engineering features we have created in these systems will find their way into the "kit maker" industry standards. This is clearly all part of the fun.
Have you ever wondered how close attention we paid to detail? Here is the answer - there is only one intercooler tube that can be used on two different year cars. Every single tube has been designed to fit that year car and that year car only. Some people might call it a little much, we call it easier to install.
We have the parts needed for all RHD cars too!
New STANDARD Features!
Ceramic Coated Turbine Housing!
No More Broken Studs!!! 10 mm Turbo to Manifold Studs.
The S4 features a Stainless Steel Tube Header Style Exhaust Manifold w/ Internal Wastegate. An all New Turbo Position for the T25/T28 Turbo.
Power Levels of 8 psi to 15 psi and 190 to 290 rwhp, depending upon fuel system.
System Features:
* Garrett GT2560 or GT2860RS Turbo with Ball Bearings and Water Cooling
* Stainless Steel Tube Exhaust Manifold
* Manifold Support Bracket
* Stainless Steel Separated Gases Downpipe
* Stainless Steel Braided Oil Feed and Water Lines at the Turbo
* Stainless Steel Oil Drain Line
* Intercooler #1
* Cool Air Box
* Radiator Cover (1990-1997 Only)
* Air Scooper
* Water By-Pass System
* Coolant Re-Route
* Power Steering Cooler (99+ only)
* Turbo Heatshield
* Heatshield for the Hood
* Black Powder Coated Tubes
* K & N Air Filter
* Heater Line Heat Wrap
* Boost Gauge
* A-Pillar Gauge Mount
* Black Turbo Hose
* T-Bolt Hose Clamps
* Comprehensive, Photo Illustrated, User Friendly Instructions.
Please specify whether or not the flow meter will be used.
Now available for 1990 to 1993 Miatas!
|,|"Vehicle Year" "Select Year" "1990-1993" "1994-1997" "1999-2005"|-||-|"Turbo Size" "GT2560" "GT2860" "GT2871 add(+$350)" "GT3071 add(+$450)"|-||-|"Color" "Black Powdercoat" "Customer Color add(+$200.00) (add in comments section)"|-||-|"Intercooler Size" "#1" "#2 add(+$75.00)" "#3 add(+$150.00)"|-||-|"Fueling Option" "None" "Begi Fuel System add(+$450.00)" "MegaSquirt PNP add(+$799.00)" "Xede EMS add(+$1399.00)" "MegaSquirt PNP 99-05 add(+$1199.00)" "Zoom3 + PNP Harness add(+$699.00)"|-||-|"Add Gauge Mount" "Single" "Dual Gauge Mount add(+$5.00)"|-||-|"Bumper Type" "Standard" "Sport" "R Package"|-||-|"Cruise Control" "No" "Yes"|-||-|"Add Rear Therm. Coolant Reroute" "No" "Yes, add(+$224.00)"|-||-|"Ceramic Coating Color" "Silver" "Black" "Zirconium add(+$100.00)"|-||-|"Add Meth/H20 Inj. Bung" "No" "Yes, add(+$20.00)"|-||-|"Add External Wastegate" "No" "Yes, add(+$1185)"|-||-|"Shipping Cost" "add(+$125)"|-||-|||-||BES5MITUSY19|,|ENPE19|,|Begi S5 Miata Turbo System 1994-2005|,|BEGI-S5|,|5,000.00|,|4,700.00|,||,||,|25.000 |,||,||,||,|The BEGi Turbo System features components not found in any other systems. The most obvious parts are the scooper, radiator cover, and the cool air box. The power improvements come from the new downpipe, larger intercooler, and exhaust manifold improvements unprecedented in turbocharging. The downpipe is stainless steel, and features a new power improving design. Many of the power improvements are evident in the details. Temperature reductions through out the system have also received special attention. The water and oil lines to the turbo are more heat tolerant, well beyond the requirements. The system also features t-bolt hose clamps on the boost tubes. The larger intercooler has sheet metal endtanks with a bar and plate core. The kit comes with black powder coated tubes, and black turbo hose.
Many of the engineering features we have created in these systems will find their way into the "kit maker" industry standards. This is clearly all part of the fun.
Have you ever wondered how close attention we paid to detail? Here is the answer - there is only one intercooler tube that can be used on two different year cars. Every single tube has been designed to fit that year car and that year car only. Some people might call it a little much, we call it easier to install.
We have the parts needed for all RHD cars too! Please specify that you have a UK sped car on a 1.6L motor so we know to include the correct heatshield and oil supply lines. This feature is available for all turbo systems.
New STANDARD Features!
Ceramic Coated Exhaust Manifold and Turbine Housing!
No More Broken Studs!!! 10 mm Turbo to Manifold Studs.
The "Military Power" System.
Power Levels starting at 8 psi to the limits of the engine, fuel system, octane rating of fuel. The limits of the turbo can approach 450 + bhp.
This system has the potential to take the Miata engine into power ranges that have not yet been approached. The Series 5 variables including the turbo sizing, intercooling, thermal controls, engine management, and wastegates all clearly offer virtually ideal combinations for power levels starting at as low as 200 rwhp to the limits of the engine. This system is custom built for the end users goals.
System Features:
* Garrett T3, T4, T3 Hybrid, GT2860, GT2871, or GT3071 Turbo with Oil and Water Cooling
* Ceramic Coated Turbine Housing
* Cast Ductile Iron Exhaust Manifold, No EGR Fitting - Ceramic Coated!
* Stainless Steel Separated Gases Downpipe
* Stainless Steel Braided Oil Feed and Water Lines at the Turbo
* Stainless Steel Oil Drain Line
* Intercooler # 3 (custom sizes available)
* Tial External Wastegate, typically the 38 mm
* Cool Air Box
* Radiator Cover (1990-1997 Only)
* Air Scooper
* Water By-Pass System
* Coolant Re-Route
* Power Steering Cooler (1999-2004 Only)
* Turbo Heatshield
* Compressor Inlet Tube Heatshield
* Black Powdercoated Tubes
* K & N Air Filter
* Heater Line Heat Wrap
* Boost Gauge
* A-Pillar Gauge Mount
* Black Turbo Hose
* T-Bolt Hose Clamps
* Oil Pan Drill Bits and Tap
* Comprehensive, Photo Illustrated, User Friendly Instructions.
Not available for 1990 to 1993 Miatas.
Please specify whether or not the flow meter will be used. This turbo system is a custom system and built to the specifics provided by the customer. We encourage customer to call and order this system due to all the turbo, wastegate, and downpipe options available. Lead time on this system is typically 8-10 weeks, depending upon turbo availability and parts needed to make.
|,|"Vehicle Year" "Select Year" "1994-1997" "1999-2005"|-||-|"Turbo Size" "GT2580" "T3/T4 Hybrid" "GT2871 add(+$200)" "GT3071 add(+$300)"|-||-|"Color" "Black Powdercoat" "Customer Color(add in comments section)add(+$200)"|-||-|"Fueling Option" "None" "MegaSquirt PNP add(+$799)" "Xede EMS add(+$1399)"|-||-|"Add Gauge Mount" "No" "Yes add(+$5.00)"|-||-|"Bumper Type" "Standard" "Sport" "R Package"|-||-|"Cruise Control" "No" "Yes"|-||-|"Shipping Cost" "add(+$125)"|-||-|||-||BES6MITUSY19|,|ENPE19|,|Begi S6 Miata Turbo System 1994-2005|,|BEGI-S6|,|5,300.00|,|4,995.00|,||,||,|25.000 |,||,||,||,|BEGi is pleased to introduce "The Ultimate Racer" Turbo System. It IS THE Ultimate in reliability and performance. The Turbo System features a similar exhaust manifold to the S4 system, but with an external wastegate and V-Band clamps. No breaking or stretching studs ever! The power improvements come from the new manifold, external wastegate, and larger intercooler unprecedented in turbocharging the Miata. Many of the power improvements are evident in the details. Temperature reductions through out the system have also received special attention. The water and oil lines to the turbo are more heat tolerant, well beyond the requirements. The system also features t-bolt hose clamps on the boost tubes. The larger intercooler has sheet metal endtanks, bar and plate core, and an internal baffle for better air flow. The kit comes with black powder coated tubes, and black turbo hose.
Have you ever wondered how close attention we paid to detail? Here is the answer - there is only one intercooler tube that can be used on two different year cars. Every single tube has been designed to fit that year car and that year car only. Some people might call it a little much, we call it easier to install.
This system is only available for 1.8L Miatas, 1994-2005. It will not fit a RHD Car. Not available for 1990 to 1993 Miatas. It will fit with power steering and a/c.
The "Ultimate Racer" System.
Power Levels starting at 8 psi to the limits of the engine, turbo, fuel system, and octane of fuel. The limits of the turbo can approach 450 + bhp.
This system has the potential to take the Miata engine into power and torque ranges that have not yet been approached. The Series 6 variables including the turbo sizing, intercooling, thermal controls, engine management, and wastegates all clearly offer virtually ideal combinations for power levels starting at as low as 200 rwhp to the limits of the engine. This system is custom built for the end users goals.
System Features:
* Garrett GT2860, GT2871, or GT3071 Turbo w/ Tial Stainless V-Band Turbine Housing. Oil and Water Cooled.
* Tial V- Band Stainless Turbine Housing
* S4 Manifold w/ External Wastegate. No EGR Fitting. Ceramic Coated. Made from cast weld elbows.
* Tial V-Band 38 External Wastegate
* Stainless Steel Separated Gases Downpipe with V-Band
* V-Band Clamps
* Stainless Steel Braided Oil Feed and Water Lines at the Turbo
* Stainless Steel Oil Drain Line
* Intercooler # 3 (custom sizes available)
* Cool Air Box
* Radiator Cover (1990-1997 Only)
* Air Scooper
* Water By-Pass System
* Turbo Coolant Re-Route
* Power Steering Cooler (1999-2004 Only)
* Turbo Heatshield
* Black Powdercoated Tubes
* K & N Air Filter
* Heater Line Heat Wrap
* Boost Gauge
* A-Pillar Gauge Mount
* Black Turbo Hose
* T-Bolt Hose Clamps
* Oil Pan Drill Bits and Tap
* Comprehensive, Photo Illustrated, User Friendly Instructions.
Please specify whether or not the flow meter will be used. This turbo system is a custom system and built to the specifics provided by the customer. We encourage customer to call and order this system due to all the turbo, wastegate, and downpipe options available. Lead time on this system is typically 8-10 weeks, depending upon turbo availability and parts needed to make.
|,|"Vehicle Year" "Select Year" "1994-1997" "1999-2005"|-||-|"Turbo Size" "GT2860" "GT2871 add(+$100)" "GT3071 add(+$200)"|-||-|"Color" "Black Powdercoat" "Customer Color(add in comments section)add(+$200)"|-||-|"Fueling Option" "MegaSquirt PNP add(+$799)" "Xede EMS, Injectors & PNP Clips add(+$1399)"|-||-|"Add Gauge Mount" "No" "Yes add(+$5.00)"|-||-|"Cruise Control" "No" "Yes"|-||-|"Shipping Cost" "add(+$125)"|-||-|||-||BEST-DEALS|,||,|Best Deals|,||,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-SALE|,|DONTMISS|,|BEST DEALS|,||,||,||,|MAZDA MX-5 MIATA BEST DEAL PARTS AND ACCESSORIES|,||,||,||,||,||,|
|,|||-||BFADTA|,|BFTI|,|BFGoodrich Advantage T/A|,|TR-BFGADVANTAGETA|,|189.99|,|149.02|,||,||,|5.000 |,||,||,||,|The Advantage T/A is BFGoodrich's Grand Touring All-Season tire developed for the drivers of sporty touring coupes and sedans. Designed to be the everyday tire with performance that's anything but, the Advantage T/A combines sporty looks, long wear and all-weather traction, including in light snow.
Advantage T/A radials feature a silica-enhanced tread compound molded into a symmetric tread design that features BFGoodrich's g-Grip interlocking sipes to combine all-weather bite with responsive handling. The tire's internal structure includes twin steel belts reinforced by BFGoodrich's Equal Tension Containment System (ETEC) of spirally wrapped reinforcement under the tread to provide strength and blend high speed durability with even ride quality. The Advantage T/A features a dimensionally stable polyester carcass to enhance ride quality.
Price Per Tire, order 4 for full set**
|,|"Select Size" "195/65 R15" "205/60 R16, add(+$15.00)" "215/55 R17, add(+$30)"|-||-|"Shipping & Handing" "add(+$39)"|-||-|||-||BFGTAKDW2|,|BFTI|,|BFGoodrich g-Force T/A KDW 2|,|TR-BFGGFORCETAKDW2|,|169.99|,|149.99|,||,||,|5.000 |,||,||,||,|The BFGoodrich g-Force T/A KDW-2 (KDW for Key feature: Dry and Wet traction, the "2" is our addition and identifies that this is the second generation g-Force T/A KDW) is the Ultra High Performance Summer tire that was developed to provide a blend of a dramatic-looking, ultra high performance tread design with superior dry and wet road performance. The BFGoodrich g-Force T/A KDW-2 is available in sizes for drivers of the world's hottest sports cars, coupes, sedans and light trucks. Like all summer tires, g-Force T/A KDW-2 tires are not intended to be driven in near-freezing temperatures, through snow or on ice.
The g-Force T/A KDW-2 features large tread blocks to enhance dry road stability, handling and wear under high torque loads, while rounded shoulder profiles help provide feedback for the driver by communicating the tire's progressive and predictable characteristics as they reach their limits of adhesion. A silica-reinforced tread compound with wide circumferential and lateral grooves form a directional tread design to speed water evacuation, improve wet traction and reduce the risk of hydroplaning. Internally, the twin steel belts are reinforced by BFGoodrich's ETEC (Equal TEnsion Containment) System which uses spirally wound nylon strips to provide excellent strength, consistent footprint pressure and maximum contact area under Y-speed rated conditions while it reduces weight and helps provide more uniform ride quality. The g-Force T/A KDW-2 tires feature g-Control sidewall inserts to resist deflection and generate cornering force while rim protector ribs help protect alloy wheels from curb damage.
Price Per Tire, order 4 for full set**
|,|"Select Size" "205/45Z R16" "215/45Z R17, add(+$5)"|-||-|"Shipping & Handing" "add(+$30)"|-||-|||-||BFTI|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|BFGoodrich Tires|,||,||,||,||,||,||,||,||,||,||,|||-||BIL46-190345|,|20MAMISUANDS3|,|Bilstein B12 Pro-Kit Suspension Front + Rear Mazda Miata 2006-2015|,|bil46-190345|,|1,342.00|,|1,035.53|,||,||,||,||,||,||,|Bilstein B12 Pro-Kit Suspension Front + Rear Mazda Miata 2006-2015
Description
The shock absorber experts from Bilstein have teamed up with the spring experts at Eibach, resulting in the best the two industry leaders have to offer: a monotube gas pressure suspension system that provides incredible driving pleasure and performance along with superior ride comfort. The B12 Pro-Kit system will retain most of the factory comfort while lowering your car and increasing handling capabilities! The B12 kits are road-tested and fine-tuned to perfectly complement each other; don't risk getting a spring / shock combo that are improperly matched!
Earning the number-one name in suspension doesn't come easy. Bilstein proves their worth and earns their rep the hard way on racetracks and desert circuits around the world. Applying what they learn at the track to the street, Bilstein designs their shocks to transform your vehicle into a fine-tuned performance machine. Bilstein shocks boast a mono-tube design that instantaneously adjusts to the road surface. And unlike conventional multi-tube shocks, mono-tube performance never suffers from age, use or heat, and they never require manual adjustments. Just bolt on and go. Best yet, Bilstein backs your Heavy Duty Shocks with a limited Lifetime Warranty.
Eibach produces some of the highest quality springs in the world. They can be found everywhere from high performance street cars to full race F1 cars. Eibach springs are built from the ground up - starting with full research and development for every application to determine the best balance between performance and ride quality. Eibach springs are on average 2.75 pounds lighter than the competition. This reduction of unsprung mass is equivalent to removing 50 pounds from your car!
Specs:
Front Lowered Height: 30-35mm
Rear Lowered Height: 30mm
|,|"Shipping cost" "add(+$95)"|-||-|||-||BIL47-249622|,|NEW|,|Bilstein B14 (PSS) Front & Rear Performance Suspension Kit 2016-2021|,|bil47-249622|,|1,500.00|,|1,257.00|,||,||,||,||,||,||,|Bilstein B14 (PSS) Front & Rear Performance Suspension Kit 2016-2021
The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
*The product benefits at a glance:*
* Threaded body adjustable range of 20 mm
* Lowering of approx. 30-50 mm at front and rear
* Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
* Aluminum Spring plates and lock nuts
* Surface coating using Triple-C-Technology®for long-lasting corrosion resistance
* Round threads for easy adjustment
* Quality sport springs made from highly durable material
* Gas pressure technology
* BILSTEIN monotube technology, made in Germany
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||BIL47-131811|,|NEW|,|Bilstein B14 2007 Sport Front and Rear Suspension Kit 2006-2015|,|bil47-131811|,|1,446.27|,|1,112.02|,||,||,||,||,||,||,|Bilstein B14 2007 Sport Front and Rear Suspension Kit 2006-2015
The Bilstein B14 PSS Suspension allows adjustable vehicle ride height without the expense of a fully adjustable damping system. This system features both coilover and standard mono-tube gas pressure shock or struts with performance level valving for application specific, progressive rate coil springs.
*The product benefits at a glance:*
* Threaded body adjustable range of 20 mm
* Lowering of approx. 30-50 mm at front and rear
* Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
* Aluminum Spring plates and lock nuts
* Surface coating using Triple-C-Technology®for long-lasting corrosion resistance
* Round threads for easy adjustment
* Quality sport springs made from highly durable material
* Gas pressure technology
* BILSTEIN monotube technology, made in Germany
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||BIL48-249669|,|NEW|,|Bilstein B16 (PSS10) Mazda MX-5 Miata Front & Rear Performance Suspension System 2016-2021|,|bil48-249669|,|2,795.00|,|1,899.00|,||,||,||,||,||,||,|Bilstein B16 (PSS10) Mazda MX-5 Miata Front & Rear Performance Suspension System 2016-2021
The engineers at BILSTEIN have created the ultimate race inspired suspension—the BILSTEIN B16 PSS9/PSS10. This innovative suspension system delivers unsurpassed driving performance.
The manually adjustable damping mono-tube gas shock absorbers feature 9 or 10-stage precise compression and rebound settings, from comfort to competition. The threaded body allows accurate adjustability of the front and rear progressive rate springs to achieve the vehicle ride height, center of gravity and level of performance handling desired.
The Bilstein B16 system puts you in complete control, providing the kind of precise suspension tuning formerly available only on race cars. From a weekend of competition to daily driving, this system provides perfect handling performance for every situation.
*The product benefits at a glance:*
* Individual settings ranging from maximum comfort to aggressive Sport can be selected by the twist of a dial (9 on PSS9, 10 on PSS10)
* Threaded body adjustable range of 20 mm at both axles
* Lowering of approx. 30-50 mm at front and rear
* Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
* Spring plates and lock nuts made from a special aluminum alloy
* Surface coating using Triple-C-Technology®for long-lasting corrosion resistance
* Round threads for easy adjustment
* Quality sport springs made from highly durable material
* Gas pressure technology
* BILSTEIN monotube technology, made in Germany
Part Number:bil48-249669
Description:B16 (PSS10)-Suspension Kit
Finish:Dampers: Zinc Plated/Springs: Blue
Internal Design:Monotube
Series:B16 (PSS10)
Title:Bilstein Shock Absorbers
California Proposition 65:WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov
Position:Front and Rear
WARNING CA Proposition 65:Yes
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||BIL48-131841|,|NEW|,|Bilstein B16 2006 Mazda MX-5 Miata Base Front and Rear Performance Suspension System 2006-2015|,|bil48-131841|,|2,551.00|,|1,836.95|,||,||,||,||,||,||,|Bilstein B16 2006 Mazda MX-5 Miata Base Front and Rear Performance Suspension System 2006-2015
The engineers at BILSTEIN have created the ultimate race inspired suspension—the BILSTEIN B16 PSS9/PSS10. This innovative suspension system delivers unsurpassed driving performance.
The manually adjustable damping mono-tube gas shock absorbers feature 9 or 10-stage precise compression and rebound settings, from comfort to competition. The threaded body allows accurate adjustability of the front and rear progressive rate springs to achieve the vehicle ride height, center of gravity and level of performance handling desired.
The Bilstein B16 system puts you in complete control, providing the kind of precise suspension tuning formerly available only on race cars. From a weekend of competition to daily driving, this system provides perfect handling performance for every situation.
*The product benefits at a glance:
* Individual settings ranging from maximum comfort to aggressive Sport can be selected by the twist of a dial (9 on PSS9, 10 on PSS10)
* Threaded body adjustable range of 20 mm at both axles
* Lowering of approx. 30-50 mm at front and rear
* Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions
* Spring plates and lock nuts made from a special aluminum alloy
* Surface coating using Triple-C-Technology®for long-lasting corrosion resistance
* Round threads for easy adjustment
* Quality sport springs made from highly durable material
* Gas pressure technology
* BILSTEIN monotube technology, made in Germany
Part Number:bil48-131841
Description:B16 (PSS10)-Suspension Kit
Series:B16 (PSS10)
Internal Design:Monotube
Finish:Dampers: Zinc Plated/Springs: Blue
Title:Bilstein Shock Absorbers
California Proposition 65:WARNING: Cancer & Reproductive Harm
Position:Front and Rear
|,|"Shipping & Handling" "add(+$105)"|-||-|||-||BL4SLFRME|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Black 4-Hole Slimline License Plate Frame - Metal|,|AGI-LF451B|,|34.99|,|29.95|,||,||,|0.000 |,||,||,||,|Black 4-Hole Slimline Frame - Metal. Each frame includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship
Made in the USA with a Lifetime Warranty.
|,|||-||BLACKFRIDAYSALE|,||,|Black Friday Sale|,|blackfridaysale|,|0.00|,|0.00|,||,||,||,||,||,||,|
|,|||-||BLLIPLFRWIMI|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Black License Plate Frame with Miata MX-5 Logo|,|LF-MIA-EB|,|49.95|,|39.99|,||,||,|0.000 |,||,||,||,|PREMIER COLLECTION ETCHED BLACK FRAMES:
Black powder-coated license frames with brushed stainless steel lettering. Complete with vehicle specific hardware and black theft-deterrent caps.
Made in the USA with a Lifetime Warranty.
|,|||-||BLLIPLFRWIZO|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Black License Plate Frame with Zoom Zoom Logo|,|AGI-LFZOOEB|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|
PREMIER COLLECTION ETCHED BLACK FRAMES:
Black powder-coated license frames with brushed stainless steel lettering. Complete with vehicle specific hardware and black theft-deterrent caps.
Made in the USA with a Lifetime Warranty.
|,|||-||BLLIPLFRWIZO1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Black License Plate Frame with Zoom Zoom Logo|,|LFW-ZOO-EB|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|PREMIER COLLECTION ETCHED BLACK FRAMES:
Black powder-coated license frames with brushed stainless steel lettering. Complete with vehicle specific hardware and black theft-deterrent caps.
Made in the USA with a Lifetime Warranty.
|,|||-||ST-016B|,|20MAMIINKN|,|Black Shift Knob - 4 interchangeable rings - Universal|,|ST-016B|,|55.99|,|48.99|,||,||,|0.000 |,||,||,||,|Black Shift Knob - 4 interchangeable rings - Universal
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||BLUBLACCARFI|,||,|Blue & Carbon Fiber|,|blublaccarfi|,||,||,||,||,||,||,||,||,||,|||-||NCBODYKITS|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|BODY KITS|,||,||,||,||,||,||,||,||,||,||,|||-||BODYKITS|,||,|BODY KITS|,||,||,||,||,||,||,||,||,||,||,|||-||NA19901997|,|BODYKITS|,|BODY KITS (1990-1997)|,||,||,||,||,||,||,||,||,||,||,|||-||NB19992005|,|BODYKITS|,|BODY KITS (1999-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||NC20052009|,|BODYKITS|,|BODY KITS (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-BORLA|,|SHOP-BY-TOP-MIATA-BRANDS|,|Borla Exhaust|,||,||,||,||,||,||,||,||,||,||,|||-||BOSTSTCAMIEX|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Borla Stainless Steel Miata Exhaust 1999-2005|,|BORLA-11732|,|739.99|,|564.95|,||,||,|5.000 |,||,||,||,|T-304 Stainless Steel Miata Exhaust
BORLA exhausts feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium Aircraft-Quality T-304 Stainless Steel, an alloy superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit.
Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Speacial Feature for this Borla Exhaust are:
* All Stainless Steel Construction throughout including flanges
* Performance - flows significantly better than stock 60%-65%.
* Industry Leading Craftsmanship
* Weight Savings - 5 Pounds lighter than OE muffler
* Superior fit and finish
* Easy installation for most Miata mechanics
* Template supplied for cutting exhaust outlet
* 7-15% increase in horsepower
* Better Fuel Economy
* Million Mile Borla Warranty
CLICK ON THE PHOTOS FOR A LARGER VIEW!
|,|"Shipping Cost" "add(+$89)"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-BOSS-FROG|,|SHOP-BY-TOP-MIATA-BRANDS|,|Boss Frog|,||,||,||,||,||,||,||,||,||,||,|||-||BRAILLE-B129|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|Braille B129 No-Weight Race Battery 9.5 lbs|,|braille-b129|,|207.99|,|169.00|,||,||,||,||,||,||,|Braille B129 No-Weight Race Battery 9.5 lbs
At 9 pounds, the B129 boasts 813 pulse cranking amps more than any other battery in its weight class. This is the perfect battery for those that need just little bit more power than the B106, but are looking to save every ounce vs. stepping up to a B14115 battery. Most common applications are powersports/motocycle applications. (Note: while high in cranking amps, make sure battery has enough capacity for the vehicle intended to be used in)
Direct replacement for: YTX12-BS, YB12B-B2, ETX12
Physical Specifications:
BCI Group All sizes
Weight9.5lbs / 4.3kg
Length5.8" / 147mm
Width3.4" / 86mm
Height5.1" / 0mm
Polarity Left Side Positive
Performance:
Voltage 12
Full Charge Voltage 13.2
Pulse Cranking Amps (PCA) 813
Amp Hour (AH) 12
Reserve Capacity (RC) > 20 mins.
Life Cycle @ 10% DOD 2000
|,|||-||BRB1NORABA|,|ACCESSORIES|,|Braille B14115 No-Weight Race Battery 11.5 lbs|,|BB-B14115|,|258.49|,|199.02|,||,||,|3.000 |,||,||,||,|It Started a Mutiny
Our B14115 battery was the first battery we released. This battery has great all around performance for small displacement motors. Using our AGM racing technology it has 904 PCA, more than any other battery in its weight class
No Spill, No Corrosion, No Maintenance
Technically registered as a "sealed valve regulated" design, this patented technology completely eliminates acid spills and corrosion on terminals. This design is environmentally safe does not need filling and maintenance. Air shipping approved.
Exclusive Dual Terminal Design
A Braille Battery exclusive! This feature allows the battery to be mounted in a variety of positions. It is designed to accept racing, powersports and automotive terminals vertically and horizontally.
Stainless Steel Terminals
Stop loose battery connections with our robust stainless steel threads. These heli-coil design threads allow higher bolt torque and help keep your battery connected even in high vibration environments.
Exclusive Brass Auto Terminals
Included with every Braille Auto Battery are patent pending high quality brass SAE terminals. Designed to distribute the electrical load into and out of the battery. Designed for high amperage, high stress use of racing and audio competitions.
Green from Start to Finish
We employ a manufacturing process with the highest concern for the environment and quality. Recycled lead, plastic and stainless steel ensure we'll have a future to race towards.
Solid Top Lead Connectors
Shaken, not stirred - From 6 "G" NHRA drag launches, to 4 G cornering loads in Indy this design holds the internals firmly in place.
Performance Certified - Fully Charged
Every Braille Battery is individually tested and certified before shipping, eliminating DOA batteries. Fully charged and ready to install at time of shipping.
|,|||-||BRB2NOCAFIRA|,|ACCESSORIES|,|Braille B14115C No-Weight Carbon Fiber Race Battery 11.5 lbs|,|BB-B14115C|,|334.99|,|299.02|,||,||,|3.000 |,||,||,||,|Save Every Ounce
At under 12 pounds, the B14115C offers the power to start winning race motors. Using patented Advanced AGM racing technology 904 pulse cranking amps are available to get your vehicle started.
No Spill, No Corrosion, No Maintenance
Technically registered as a "sealed valve regulated" design, this patented technology completely eliminates acid spills and corrosion on terminals. This design is environmentally safe does not need filling and maintenance. Air shipping approved.
Exclusive Dual Terminal Design
A Braille Battery exclusive! This feature allows the battery to be mounted in a variety of positions. It is designed to accept racing, powersports and automotive terminals vertically and horizontally.
Stainless Steel Terminals
Stop loose battery connections with our robust stainless steel threads. These heli-coil design threads allow higher bolt torque and help keep your battery connected even in high vibration environments.
Exclusive Brass Auto Terminals
Included with every Braille Auto Battery are patent pending high quality brass SAE terminals. Designed to distribute the electrical load into and out of the battery. Designed for high amperage, high stress use of racing and audio competitions.
Green from Start to Finish
We employ a manufacturing process with the highest concern for the environment and quality. Recycled lead, plastic and stainless steel ensure we'll have a future to race towards.
Solid Top Lead Connectors
Shaken, not stirred - From 6 "G" NHRA drag launches, to 4 G cornering loads in Indy this design holds the internals firmly in place.
Performance Certified - Fully Charged
Every Braille Battery is individually tested and certified before shipping, eliminating DOA batteries. Fully charged and ready to install at time of shipping.
|,|||-||BRB2NORASTBA|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|Braille B2015 No-Weight Race & Street Battery 15 lbs|,|BB-2015|,|289.99|,|199.02|,||,||,|3.000 |,||,||,||,|Just Right
At under 15 pounds, the B2015 is out most popular non-carbon racing battery. It is able to start larger engines easily for racing and offers daily driving capability for 4 cylinder motors with ease. With 1067 pulse cranking amps this has enough power to start more than any other battery in its weight class.
No Spill, No Corrosion, No Maintenance
Technically registered as a "sealed valve regulated" design, this patented technology completely eliminates acid spills and corrosion on terminals. This design is environmentally safe does not need filling and maintenance. Air shipping approved.
Exclusive Dual Terminal Design
A Braille Battery exclusive! This feature allows the battery to be mounted in a variety of positions. It is designed to accept racing, powersports and automotive terminals vertically and horizontally.
Stainless Steel Terminals
Stop loose battery connections with our robust stainless steel threads. These heli-coil design threads allow higher bolt torque and help keep your battery connected even in high vibration environments.
Exclusive Brass Auto Terminals
Included with every Braille Auto Battery are patent pending high quality brass SAE terminals. Designed to distribute the electrical load into and out of the battery. Designed for high amperage, high stress use of racing and audio competitions.
Green from Start to Finish
We employ a manufacturing process with the highest concern for the environment and quality. Recycled lead, plastic and stainless steel ensure we'll have a future to race towards.
Solid Top Lead Connectors
Shaken, not stirred - From 6 "G" NHRA drag launches, to 4 G cornering loads in Indy this design holds the internals firmly in place.
Performance Certified - Fully Charged
Every Braille Battery is individually tested and certified before shipping, eliminating DOA batteries. Fully charged and ready to install at time of shipping.
|,|||-||BRB3NOEXUSEB|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|Braille B3121 No-Weight Extreme Use Battery 21 lbs|,|BB-3121|,|301.49|,|249.99|,||,||,|3.000 |,||,||,||,|Cubic Horsepower
At under 22 pounds, the B3121 is our lightest do eveything battery yet. Using our Advanced AGM racing technology we have put a lot of power into a very small package. With 1380 pulse cranking amps this has enough power to start more than any other battery in its weight class.
No Spill, No Corrosion, No Maintenance
Technically registered as a "sealed valve regulated" design, this patented technology completely eliminates acid spills and corrosion on terminals. This design is environmentally safe does not need filling and maintenance. Air shipping approved.
Exclusive Dual Terminal Design
A Braille Battery exclusive! This feature allows the battery to be mounted in a variety of positions. It is designed to accept racing, powersports and automotive terminals vertically and horizontally.
Stainless Steel Terminals
Stop loose battery connections with our robust stainless steel threads. These heli-coil design threads allow higher bolt torque and help keep your battery connected even in high vibration environments.
Exclusive Brass Auto Terminals
Included with every Braille Auto Battery are patent pending high quality brass SAE terminals. Designed to distribute the electrical load into and out of the battery. Designed for high amperage, high stress use of racing and audio competitions.
Green from Start to Finish
We employ a manufacturing process with the highest concern for the environment and quality. Recycled lead, plastic and stainless steel ensure we'll have a future to race towards.
Solid Top Lead Connectors
Shaken, not stirred - From 6 "G" NHRA drag launches, to 4 G cornering loads in Indy this design holds the internals firmly in place.
Performance Certified - Fully Charged
Every Braille Battery is individually tested and certified before shipping, eliminating DOA batteries. Fully charged and ready to install at time of shipping.
|,|||-||BRB3NOEXUSEC|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|Braille B3121 No-Weight Extreme Use Carbon Fiber Battery 21 lbs|,|BB-B3121C|,|423.74|,|399.98|,||,||,|3.000 |,||,||,||,|"Cool" Carbon Fiber Case
Higher engine temps equal lower battery performance. Braille's exclusive Carbon Fiber Case protects the batteries internals from high temps and provides the longest service life. Don't settle for a metal case that conducts heat, be cool.
No Spill, No Corrosion, No Maintenance
Technically registered as a "sealed valve regulated" design, this patented technology completely eliminates acid spills and corrosion on terminals. This design is environmentally safe does not need filling and maintenance. Air shipping approved.
Exclusive Dual Terminal Design
A Braille Battery exclusive! This feature allows the battery to be mounted in a variety of positions. It is designed to accept racing, powersports and automotive terminals vertically and horizontally.
Stainless Steel Terminals
Stop loose battery connections with our robust stainless steel threads. These heli-coil design threads allow higher bolt torque and help keep your battery connected even in high vibration environments.
Exclusive Brass Auto Terminals
Included with every Braille Auto Battery are patent pending high quality brass SAE terminals. Designed to distribute the electrical load into and out of the battery. Designed for high amperage, high stress use of racing and audio competitions.
Green from Start to Finish
We employ a manufacturing process with the highest concern for the environment and quality. Recycled lead, plastic and stainless steel ensure we'll have a future to race towards.
Solid Top Lead Connectors
Shaken, not stirred - From 6 "G" NHRA drag launches, to 4 G cornering loads in Indy this design holds the internals firmly in place.
Performance Certified - Fully Charged
Every Braille Battery is individually tested and certified before shipping, eliminating DOA batteries. Fully charged and ready to install at time of shipping.
|,|||-||BRBAUSA|,|SHOP-BY-TOP-MIATA-BRANDS|,|Braille Battery USA|,||,||,||,||,||,||,||,||,||,||,|||-||BRMLMILICAFI|,|ACCESSORIES|,|Braille ML9C Micro-Lite Lithium Carbon Fiber Race Battery 3.7 lbs|,|BB-ML9C|,|997.49|,|949.99|,||,||,|3.000 |,||,||,||,|ML9C Under 4 Pounds
Braille Lithium-Ion Technology produces a battery with more power that is lighter, stronger and more efficient. Braille's signature cranking power and over 50%lighter.
Bolt In & Win
Direct drop in replacement sizing for common applications. Patented lithium chemistry allows direct use with vehicle alternators and common charging systems.
Superior Electrical Performance
Give your ECU & Ignition what it needs! Over 90% of Braille's Lithium stored energy is useable- 3 x more usable capacity results in higher usable voltage.
Carbon Case, Sealed-Safe Technology
Sealed-Safe Lithium Cells have No Acid, Non Spilling internals packed inside the Braille MICRO-LiTE Carbon Fiber Casing. The results: Safer, Longer Life, More Consistent Performance.
Variable Mounting Position
Exclusive to Braille's MICRO-LiTE technology is the ability to mount the battery vertically or horizontally. The vertical aluminum part #211 or horizontal aluminum part #1018 offers the lightest and most secure set up.
True Torque Posts - High Amp Ready
True-Torque Automotive Posts are low total impedance connectors which transmit the highest amperage and Stainless-Steel bolts for ring-style connections are included.
Lithium Competition Warranty
MICRO-LiTE Lithium batteries are backed by a 1 year manufacture warranty. Braille's warranty covers both racing and competition use in applications listed for each battery.
Made in the USA
Braille's Lithium batteries are designed, built and shipped from the USA for customers around the World.
Putting the World 1st
Braille's MICRO-LiTE Racing batteries are the World's first Carbon Cased Lithium Batteries. Exclusive materials and technology allows the competitor and the environment to finish in 1st place.
Start Winning. Never Stop
Shipped fully charged and certified, Braille MICRO-LiTE batteries are designed to provide the highest level of performance for today's and tomorrow's race win.
|,|||-||13-1090ND|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Brake Caliper Paint System - RED 2016-2019|,|13-1090ND|,|105.05|,|79.95|,||,||,||,||,||,||,|Brake Caliper Paint System - RED 2016-2019
The paint has an industry leading heat resistance capability of 900 degrees F.
*** Product images may differ from actual product appearance ***
|,|||-||PARTS---PERFORMANCE-BRAKES---ROTORS|,||,|BRAKES & ROTORS|,||,||,||,||,||,||,||,||,||,||,|||-||BREMBOBRAKES|,|SHOP-BY-TOP-MIATA-BRANDS|,|Brembo Brakes|,||,||,||,||,||,||,||,||,||,||,|||-||BRGRTUMIBIGB|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Brembo Gran Turismo Miata Big Brake Kit 1990-2005|,|BRM-1A1-5001A|,|3,195.00|,|3,085.00|,||,||,|10.000 |,||,||,||,|
The Gran Turismo system’s level of technology and performance is unrivaled by any other product on the market. By utilizing larger calipers and discs, thermal capacity and brake torque is increased. This potent combination offers the extreme in Brembo’s leading
edge technology for high performance street or track use
applications.
• Brembo two piece “floating” hat and rotor assemblies reduce unsprung and rotating weight and dissipate heat faster.
• Brembo drilled two piece discs up to 16” (405 mm)
• Stainless steel braided brake lines: DOT/TÜV approved
• Brembo high performance brake pads
• Brembo “floating” anti-rattle disc hardware
• Brembo billet caliper mounting brackets.
• Most of GT applications comes with TÜV Certification
* Brembo brake systems are fully compatible with ABS and
traction control system. All of the necessary hardware is
included to insure seamless installation.
Click here for more info
|,|"Select Finish" "Select Here" "Red" "Black" "Silver"|-||-|"Shipping Cost" "add(+$85)"|-||-|||-||BRGRTUMIBIGB1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Brembo Gran Turismo Miata Big Brake Kit 2006-2010|,|BRM-1A5-5016A|,|1,695.95|,|1,655.95|,||,||,|10.000 |,||,||,||,|
Gran Turismo one piece rotor systems offer a cost effective
solution to the high performance brake upgrade. Includes
oversized calipers and discs for increased brake torque and
thermal capacity. These performance upgrades are available
for many European, domestic and import vehicles.
• Brembo slotted one piece disc up to 14” (355mm)
• Stanless steel braided brake lines: DOT/TÜV approved
• Brembo high performance brake pads
• Brembo billet caliper mounting brackets
• Most of GT applications comes with TÜV Certification
* Brembo brake systems are fully compatible with ABS and
traction control system. All of the necessary hardware is
included to insure seamless installation.
Click here for more info
|,|||-||BREMBO-HTC-64T-BRAKE-FLUID-500ML|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Brembo HTC 64T Brake Fluid 500mL|,|BRE04816410HTC|,|48.00|,||,||,||,||,||,||,||,|Brembo HTC 64T Brake Fluid 500mL
Brembo Racing HTC 64T has been specifically formulated to provide the highest performance under all racing conditions. High temperature brake fluid for extreme racing. Has a high dry boiling point Typical Competitor Racing Fluids 310°C, Brembo Racing HTC 64T plus 335°C is designed exclusively for racing use. This fluid is compatible with all Brembo Racing Brake Systems. For maximum performance advantage, before filling, all other fluids should be drained form the brake system to avoid diluting the fluid’s characteristic. Brembo HTC 64T cannot be used in Brake Systems containing magnesium parts.
|,|||-||BREMBO-SPORT-EVO-500---BRAKE-FLUID-250ML|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Brembo Sport. EVO 500++ Brake Fluid 250ml|,|BRE04816413EVO|,|23.00|,||,||,||,||,||,||,||,|Brembo Sport. EVO 500++ Brake Fluid 250ml
Brembo Sport. EVO 500++ Brake Fluid is a premium specification motor vehicle brake and clutch fluid formulated to meet brake system performance requirements for the street and the track. As a U.S. FMVSS No. 116 DOT3 or DOT4 blend, Brembo Sport.EVO 500 is suitable for use in cars (especially those with ABS braking systems), commercial vehicles and motorcycles for which a petroleum-based fluid is specified. Not suitable for vehicles with mineral oil systems (e.g., certain Citroen models).
|,|||-||BRPOS|,||,|Bridgestone Potenza S-03|,|WTBRIPOT|,|152.00|,|135.00|,||,||,|10.000 |,||,|sdrthsf|,||,|NO LONGER AVAILABLE
|,|"Please Select Size" "195/50-15" "205/50-15 add(+$15.00)" "205/45-16 add(+$39.00)" "205/40-17 add(+$65.00)"|-||-|||-||BRIDGESTONE-POTENZA-RE-71R|,|BRTI|,|Bridgestone Potenza RE-71R |,|bridgestone-potenza-re-71r|,|209.99|,|159.05|,||,||,||,||,||,||,|Bridgestone Potenza RE-71R
The Potenza RE-71R is an Extreme Performance Summer tire developed for serious sports car, sports coupe and performance sedan driving enthusiasts looking for Bridgestone's fastest DOT-legal street radial. Starting with a clean-sheet approach and a virtual slick tread, all of the design features were fine-tuned to maximize performance, traction, handling and control. Performance-tuned for dry and damp conditions, the Potenza RE-71R, like all Extreme Performance Summer tires, are not intended to be serviced, stored or driven in near- and below-freezing temperatures, through snow or on ice.
Bridgestone Potenza RE-71RPotenza RE-71R tires employ a newly developed tread compound that enhances grip by increasing contact with the road surface. This compound is molded into a directional tread design featuring a continuous center rib flanked by massive shoulders to provide constant rubber-to-road contact that enhances steering response and cornering stability. While wide circumferential grooves with hydro evacuations surface ridges on their inner walls and multi-angle "7-shaped" lateral grooves promote water drainage to help retain wet traction, longitudinal and lateral hydroplaning resistance will be challenged if heavy rain or standing water is encountered. Drivers should drive cautiously at reduced speeds in these conditions.
The tire's internal structure features a symmetric shape that helps distribute footprint pressure evenly during aggressive cornering. Two wide steel belts reinforced by spirally wound nylon provide strength, uniform ride quality and high-speed capability.
Price Per Tire, order 4 for full set**
|,|"Select Size" "205/45 R16, add(+$55)" "215/45 R17, add(+$85)"|-||-|"Shipping & Handing" "add(+$45)"|-||-|||-||BRPORE2|,|BRTI|,|Bridgestone Potenza RE960AS Pole Position|,|TR-BRDGSTNPOTNZARE960|,|199.99|,|155.02|,||,||,|5.000 |,||,||,||,|The Potenza RE960AS Pole Position with UNI-T AQ II Technology is the Ultra High Performance All-Season member of Bridgestone’s Potenza family of performance tires for the drivers of sports cars, sports coupes and performance sedans. The Potenza RE960AS Pole Position is designed to provide year-round driving flexibility by offering predictable handling, traction and control on dry and wet roads, as well as in light snow.
The Potenza RE960AS Pole Position features Bridgestone’s UNI-T AQII Technology, which uses advanced compound and construction features to enhance and preserve wet traction through the tire’s life. It molds a dual-layer, all-season tread compound into a directional design to provide stability on dry roads while its grooves help pump water and slush through the tire's footprint to increase hydroplaning resistance and foul weather traction. Scalloped multi-edge lateral grooves on the leading edge of each tread block and multiple sipes in each tread block increase the number of biting edges to enhance wet road and light snow traction. The tire's structure includes twin steel belts reinforced by spirally wrapped nylon, along with a carcass reinforced by a hard sidewall filler between polyester cord plies to help resist distortion at high speeds and while cornering.
Price Per Tire, order 4 for full set**
|,|"Select Size" "195/60 R15" "205/55 R16, add(+$35)" "215/45 R17, add(+$75)"|-||-|"Shipping & Handing" "add(+$45)"|-||-|||-||BRTI|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Bridgestone Tires|,||,||,||,||,||,||,||,||,||,||,|||-||BSROBARPA|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|BSCI Roll Bar Padding|,|MC-PAD|,|45.99|,|33.95|,||,||,|0.000 |,||,||,||,|BSCI Roll Bar Padding
3 foot stick of Black round style BSCI roll bar padding. Red and Blue are available. Price is per stick. It takes a minimum of 2 sticks to cover the basic parts of a roll cage in a Miata.
BSCI's 68000 Series Roll Bar Paddings both meet SFI standard 45.1. Each pad is 3 feet (36"/915 mm) long and comes with a molded-in acrylic adhesive for easy application to the roll bar.
- 3/4" thick.
- Fits 1 1/8" - 1 1/2" bar diameters.
- Wraps approximately halfway around the bar.
- Best for applications where space near the bar is not limited.
- Can be bent to fit 125 mm diameter or greater radius with no heating.
A unique dimension of the BSCI pad is its ability to wrap and twist around the bars in the roll cage without breaking and cracking. This padding can be bent to fit small radii with no heating required. Its application eliminates the need for sizing and cutting the padding so as to avoid breakage on turns and bends in the roll bar.
GCR 9.4.G
1. All portions of the roll cage subject to contact by the driver must be padded with a minimum 1 inch of material. Padding that meets or exceeds SFI 45.1 or FIA 8857-2001 (curved padding), or SFI 45.2 or FIA sports car head rest material (flat padding) specification is recommended.
|,|"Select Color" "Black" "Red" "Blue"|-||-|||-||BSPSPTIREEX|,||,|BSP Spare Tire Relocation Exhaust|,|256-480|,|500.00|,|469.00|,||,||,|20.000 |,||,||,||,|Fed up with your limited trunk space? Looking for more power and style with a new exahust?
This awesome exhaust was designed to give your Miata additional power, while providing the added convenience of relocating the spare tire for additional trunk storage! Brilliant!!
This is the the 4th generation of this line of exhausts, much quieter than previous versions with no boom at 3000rpm. Dyno proven 10hp+ gain!
Includes:
2.25in. mandrel bent stainless steel tubing
Single 3.5in. dual walled and resonated stainless tip
Stainless muffler
Mounting plate for spare tire relocation
Due to the size and weight of this item, additional shipping charges will be reflected in your total at check-out.
|,|||-||BYANLA|,|OWNERS-SHOWCASE|,|Byron Angeron
Bourg, LA|,|newitem109995701|,||,||,||,||,||,||,||,||,|My name is Byron Angeron. I live in Bourg, LA. Located about 60 Miles South West of New Orleans, it is a small rural area on the Banks of Bayou Terrebonne. I am the Proud owner of a 1999 Mazda Miata, Emerald Miaca Green. I purchased the car from a used car dealer in 2003.
This is the best little roadster I could have purchased.
With help of Go Miata I have purchased a front air dam, a rear deck spoiler and side sills ground Effects. I ordered them by color code, 8j which is emerald miaca green. It was a perfect match.
Go Miata has made my dreams possible. I have won numerous trophys and awards.
THANKS TO GO MIATA AND YOUR STAFF!!!!!!!
Byron-A
'99 emerald mica
|,|||-||ACCESSORIES-AUDIO|,||,|CAR AUDIO & ACCESSORIES|,||,||,||,||,||,||,||,||,||,||,|||-||ACCESSORIES-CAR-CARE-PARTS|,||,|CAR CARE & SHOP|,||,||,||,||,||,||,||,||,||,||,|||-||ALI-CARCUP|,|NEW|,|Car Cup Drink Bottle Holders With Window Dash Mount|,|ali-carcup|,|19.99|,|11.95|,||,||,||,||,||,||,|Car Cup Drink Bottle Holders With Window Dash Mount
Long description: Product Features:
It can be placed on the back of the seat of the car, the door side for the water cup or drink;when the car is in the driving process ,heavy drinks will not be overflowed. It can be installed easily by sliding between your door panel and window that is easy to take and reach. It fits regular sized cans,water bottle and juice boxes up to 3 inches in diameter.
After installing in the back of the chair, the headrest should be removed and installed on the side of the door. Insert the plug into the window slot and not affect the window. Please allow 1-3cm measuring deviation due to manual measurement.
|,|||-||ASTROL-SRF-BRAKE-FLUID-1-LITER-|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Castrol SRF Brake Fluid 1 Liter |,|CAS5SRF|,|93.00|,||,||,||,||,||,||,||,|Castrol SRF Brake Fluid 1 Liter
Castrol SRF Brake Fluid is a DOT 4 brake fluid that is suitable for all disc/drum brake systems except those prescribed for mineral oil. This has a unique silicon ester technology, which absorbs less water than conventional glycol ether fluids and prevents the fluid’s high temperature performance from deteriorating. It has a wet boiling point of 270°C (518°F) is vastly superior to the minimum requirement of 155°C demanded by the current US DOT 4 specification. It has the ability to withstand temperatures over 300°C and has superior resistance to the effects of absorbed water, which has established Castrol SRF Brake Fluid as the world’s premier fluid for the hydraulic brakes used in all forms of motorsport and racing.
|,|||-||CANY|,|ENOWSH|,|Cathy
Brooklyn, NY|,|cany|,||,||,||,||,||,||,|adfasdf|,||,|Hi,
I am a recent owner of a 2001 Miata LS. I could never
understand why anyone who owns a Miata says it is a
fun car. NOW I KNOW WHAT THEY MEAN!!!!
In Brooklyn, NY you don't see many Miatas especially
one so OUTSTANDING as mine. I would recommend this
car to anyone who wants to enjoy a roadster without
the large price attached(Porsche,Lexus,etc).
|,|||-||CEWINET|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Center Window Net|,|MC-CWN|,|199.99|,|145.02|,||,||,|0.000 |,||,||,||,|Miata Center Mindow Net
This kevlar center mount drivers window net was designed specifically for use with the miatacage.com roll cage kit.
The drivers net works with seats with or without helmet wings to help limit the amount of travel the drivers upper torso and head can have in an impact. The drivers net comes in black ribbon style only and does not interfere with the drivers side or rear vision.
March 06 Fastrack suggests center window nets. We all know how SCCA works, so you know it will probably be required in the 08 season. Get yours now! Per 08 GCR a right side head support is now required.
|,|"Select Style" "Select Here" "Polyester" "Kevlar add(+$55)"|-||-|||-||61-2030|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Centric ND Front Rotor 2016-2019|,|61-2030|,|135.02|,|104.95|,||,||,||,||,||,||,|Centric ND Front Rotor 2016-2019
Price is for ONE rotor. For standard front calipers. If you have Brembo calipers, look to our other posting of this same rotor specifically for the Brembo option.
Centric Premium Rotors are blank, 1-piece, direct replacement discs for your factory brake system. They feature Original Equipment specifications and production processes.
Like many StopTech rotors, Centric Premium Rotors offer several key advantages over stock rotors:
E-Coating - Electrocoating finish that provides long lasting corrosion protection.
Double Disc Ground - Double disc grinding eliminates run out and allows more effective pad-rotor break in.
Machined Finishes - 100% fully machined finishes provide better rotor balance and a more finished look.
Symmetric Vanes - Symmetric vane castings provide proper heat transfer and thermal efficiency.
Mill Balancing - Mill balanced to reduce feedback associated with rotor vibration.
*** Product images may differ from actual product appearance ***
|,|||-||61-2029|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Centric ND Front Rotor for Brembo option 2016-2019 |,|61-2029|,|115.95|,|85.88|,||,||,||,||,||,||,| Centric ND Front Rotor for Brembo option 2016-2019
Price is for ONE rotor.
Centric Premium Rotors are blank, 1-piece, direct replacement discs for your factory brake system. They feature Original Equipment specifications and production processes.
Like many StopTech rotors, Centric Premium Rotors offer several key advantages over stock rotors:
E-Coating - Electrocoating finish that provides long lasting corrosion protection.
Double Disc Ground - Double disc grinding eliminates run out and allows more effective pad-rotor break in.
Machined Finishes - 100% fully machined finishes provide better rotor balance and a more finished look.
Symmetric Vanes - Symmetric vane castings provide proper heat transfer and thermal efficiency.
Mill Balancing - Mill balanced to reduce feedback associated with rotor vibration.
*** Product images may differ from actual product appearance ***
|,|"Drop Shipping fee" "add(+$45)"|-||-|||-||61-2031|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Centric ND Rear Rotor 2016-2019|,|61-2031|,|95.05|,|79.95|,||,||,||,||,||,||,|Centric ND Rear Rotor 2016-2019
Price is for ONE rotor.
Centric Premium Rotors are blank, 1-piece, direct replacement discs for your factory brake system. They feature Original Equipment specifications and production processes.
Like many StopTech rotors, Centric Premium Rotors offer several key advantages over stock rotors:
E-Coating - Electrocoating finish that provides long lasting corrosion protection.
Double Disc Ground - Double disc grinding eliminates run out and allows more effective pad-rotor break in.
Machined Finishes - 100% fully machined finishes provide better rotor balance and a more finished look.
Symmetric Vanes - Symmetric vane castings provide proper heat transfer and thermal efficiency.
Mill Balancing - Mill balanced to reduce feedback associated with rotor vibration.
*** Product images may differ from actual product appearance ***
|,|"Drop Shipping fee" "add(+$35)"|-||-|||-||GOMSEATHEAT|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Check Corp Mazda MX-5 Miata Seat Heaters|,|405-303|,|299.99|,|159.00|,||,||,|0.000 |,||,||,||,|Check Corp Mazda MX-5 Miata Seat Heaters
About our seat heaters;
Seat heaters from Go Miata quickly provide comforting warmth to the body through the seats cushions and back long before the vehicle’s heater has a chance to heat the interior.
One power connection for easier installation
Advanced electronic controller
Engineered and tested to meet and exceed OEM Specifications
System diagnostic display at switch
Thin membrane increase placement options
Three temperature settings for optimum customer satisfaction
Automatic one hour shut off for added safety
One switch; A new generation LED ultra thin membrane switch regulates temperature settings and provides diagnostic feedback. The 1/16” switch has a peel and stick backing for easier installation in a wider variety of locations.
One controller; The “brain” of the system is an electronic controller that runs both front seat heaters. The module tightly regulates 2 temperature settings and provides diagnostic feedback at the LED switch. This new controller also has a power management feature that monitors power draw to avoid potentially damaging current overloads.
One power controller; With less wiring to run and only one power connection, the Front Set kit is easier to install. The new patent pending fuse adapter has a green LED that lights up signaling correct polarity when connected to power.
Make sure you update the quantity in your cart to 2 if you want a pair of these Miata Seat Heaters
|,|"Select Year" "Select Here" "1990-1995" "1996-1999" "2000-2005" "2006-2008" "2009-2011"|-||-|||-||CRFAJEFI|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Christian Cross Fish Chrome Auto Emblem|,|FISH-ICE|,|29.99|,|16.99|,||,||,|0.000 |,||,||,||,|Christian Cross Fish Chrome Auto Emblem
Elektroplate Christian Cross Fish Chrome Auto Emblem
|,|||-||CRFAJEFIROCR|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Christian Fish Crystal Chrome Emblem|,|FISH-ROSE|,|39.99|,|29.99|,||,||,|0.000 |,||,||,||,|Christian Fish Crystal Chrome Emblem
Christian Fish shiny chrome auto emblem (3” x 2.75” x .125”) by Elektroplate. All-metal (NOT plastic) with a shiny chrome finish embedded with sparkling Austrian crystals, Made in the USA. Attaches via paint-safe 3M adhesive foam tape (see "attachment info" link for more information). All Elektroplate car emblems are comprised of a chrome-plated metal finish made to withstand harsh outdoor conditions. This auto emblem will look brand new for years to come (as opposed to cheap imitations that will fade or chip within months of being on your vehicle). Our high-end auto emblems are the perfect way to showcase your Religious pride everywhere you drive. In addition, all Elektroplate chrome emblems are packaged in elegant retail packaging to make a great gift! FREE shipping on all orders.
|,|||-||CRFAJEFIREWH|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Christian Fish with Cross Reflective Decal Sticker Emblem|,|FISH-RWB|,|39.99|,|19.99|,||,||,|0.000 |,||,||,||,|Christian Fish with Cross Reflective Decal Sticker Emblem
Top quality reflective 3D decal can be applied to any smooth surface. Great for cars, trucks, boats, laptops, iPads, cellphones, scrapbooks, mailboxes, lockers and more. Adheres to any clean smooth surface. Fast and easy installation takes less than a minute. Brand new, top quality product - Made in America.
|,|||-||CH4SLFRME|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Chrome 4-Hole Slimline License Plate Frame - Metal|,|AGI-LF451C|,|35.99|,|29.95|,||,||,|0.000 |,||,||,||,|Chrome 4-Hole Slimline Fram - Metal. Each frame includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship
Made in the USA with a Lifetime Warranty.
|,|||-||MAMIMXAIRVER|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Chrome Air Vent Surrounds by IL Motorsport - Set of 4 2006-2015|,|MS-909-315|,|79.99|,|34.98|,||,||,|0.000 |,||,||,||,|Chrome Air Vent Surrounds by IL Motorsport - Set of 4 2006-2015
Chrome accents add elegance like no other modification. These are made from billet aluminum that is chrome plated for high luster and enduring bright finish. Most pieces install easily with 3M adhesive and include instructions where necessary.
Made by I.L. Motorsport
Made in Germany
|,|||-||CHFRPLWIBLML|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Chrome Front Plate With Black M Logo|,|AGI-MCC|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|Raised "M" Mazda Miata Black Pearl Logo mounted on a mirror polished stainless steel plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||CHFRWIMALO|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Chrome License Plate Frame With Mazda Logo|,|AGI-LFWMAZEC|,|49.95|,|39.99|,||,||,|0.000 |,||,||,||,|
“MAZDA” Metal License Plate Frames – Factory Style Letters.
Finished in mirrored chrome with engraved lettering that is filled with UV resistant black resin.
Each frame includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship
Made in the USA with a Lifetime Warranty.
|,|||-||CHLIPLFRWIMI|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Chrome License Plate Frame with Miata Miata MX-5 Logo|,|LF-MIA-EC|,|49.95|,|39.99|,||,||,|0.000 |,||,||,||,|Mazda Miata “Miata MX-5” Metal License Plate Frames - Factory Style Letters.
Finished in mirrored chrome with engraved lettering that is filled with UV resistant black resin.
Each frame includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship.
Made in the USA with a Lifetime Warranty.
|,|||-||CHLIPLFRWIMI2|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Chrome License Plate Frame with Miata Miata MX-5 Logo|,|LFS-MIA-EC|,|49.95|,|39.99|,||,||,|0.000 |,||,||,||,|Mazda Miata “Miata MX-5” Metal License Plate Frames - Factory Style Letters.
Finished in mirrored chrome with engraved lettering that is filled with UV resistant black resin.
Each frame includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship.
Made in the USA with a Lifetime Warranty.
|,|||-||CHFRWIZOZOLO|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Chrome License Plate Frame with Zoom Zoom Logo|,|AGI-LFZOOEC|,|49.95|,|39.99|,||,||,|0.000 |,||,||,||,|
Mazda Miata “Zoom Zoom” NEW Stainless Steel License Plate Frames – Laser Etched Lettering to Factory Style Letters.
Finished in mirrored stainless steel with laser etched lettering that is filled with UV resistant black resin.
Each frame includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship.
Made in the USA with a Lifetime Warranty.
|,|||-||TRIBEMIVERIS|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Chrome Smooth Vent Rings by IL Motorsport 1990-2005|,|916-021|,|79.99|,|69.98|,||,||,|0.000 |,||,||,||,|Chrome Smooth Vent Rings by IL Motorsport 1990-2005
Chrome Smooth Vent Rings by IL Motorsport - Set of 4
Chrome accents add an elegance like no other modification. Ours are made from billet aluminum that is chrome plated for high lustre and enduring finish. Pieces install easily with 3M adhesive and include instructions.
|,|||-||CLEARANCE|,|DONTMISS|,|CLEARANCE ITEMS|,||,||,||,|MAZDA MX-5 MIATA CLEARANCE PARTS AND ACCESSORIES|,||,||,||,||,||,|ALL SALES FINAL
|,|||-||CLMI8BODORES|,|20MAMIINAU|,|Clearwater Miata 8" Bose Door Replacement System 2006-2008|,|CWC-9B|,|1,099.99|,|899.00|,||,||,|0.000 |,||,||,||,|Clearwater Miata 8" Bose Door Replacement System 2006-2008
Available for Miata models 2006-2008, the only audio solution available to upgrade the Bose® factory sound without having to change the entire system!
Available Now, the 8” replacement solution for Bose® Stereo Systems in cars from 2006 to 2008 Only.
The System
Many hours of engineering and listening have produced what we feel to be the best sounding audio upgrade possible for this car. Our system consists of (2) replacement 8” woofers, (2) 1” soft dome tweeters, (2) custom sound modules and all the connectors and wiring needed. As with all Clearwater products, this is a simple “do it yourself” installation process. You can easily install this system yourself in about an hour. There is absolutely no cutting, drilling or splicing needed and you can return your speakers back to stock in the event you would ever want to do such a thing. This system is unlike any other available in the world.
The Sound
Upon first listening to the system you will notice a vastly improved clarity and detail in your music. A well recorded CD will open your eyes and amaze you at what you have missing. Deep and clear bass without strain will be more than apparent on this new system.
Even on “Talk Radio” you will notice improved intelligibility, and will find it easier to understand what is said even at lower volumes.
The Installation
The engineers at Clearwater have gone to great lengths to simplify the installation of our system. The factory speakers are simply removed and replaced with the new ones. There are no modifications needed or wires to cut. Everything simply snaps in or screws into place. Detailed instructions are included to let you do this yourself. If our owner’s Mother can do this, we are confident that you can too. Complete installation time is about an hour.
Which system do I need?
We offer a system for cars equipped with and without the Bose option. Our custom build and designed mid-bass drivers give you the highest quality sonic output that we could handle. Our tweeter is a custom manufactured high end unit that is used in $900 home theater loudspeakers! This tweeter simply snaps into the door where the factory tweeter was located. Once you see the quality of the parts used and the completeness of this kit, you will understand why Clearwater products are so well received.
Includes: 2 - 8” door replacement speakers with water shields, 2 tweeters, and 2 crossovers. Installation manual.
|,|||-||CLMI8DOSPRES|,|20MAMIINAU|,|Clearwater Miata 8" Door Speaker Replacement System 2006-2015 (non-Bose®)|,|CWC-9|,|799.99|,|699.00|,||,||,|0.000 |,||,||,||,|Clearwater Miata 8" Door Speaker Replacement System 2006-2015 (non-Bose®)
The newest addition to the Clearwater family, finally providing the best audio solution for all Miata models from 2006 to 2015 (non-Bose®). This system features Hi-end 8" driver and 1" tweeter replacements.
The System
Many hours of engineering and listening have produced what we feel to be the best sounding audio upgrade possible for this car. Our system consists of (2) replacement 8” woofers, (2) 1” soft dome tweeters, (2) custom sound modules and all the connectors and wiring necessary. As with all Clearwater products, this is a simple “do it yourself” installation process. You can easily install this system yourself in about an hour. There is absolutely no cutting, drilling or splicing needed and you can return your speakers back to stock in the event you would ever want to do such a thing. This system is unlike any other available in the world. Once you see the quality of the parts used and the completeness of this kit, you will understand why Clearwater products are so well received.
The Sound
Upon first listening to the system you will notice a vastly improved clarity and detail in your music. A well recorded CD will open your eyes and amaze you at what you didn’t know you were missing. Deep and clear bass without strain will be more than apparent on this new system.
Our custom built and designed mid-bass drivers give you the highest quality sonic output that we could handle. Our tweeter is a custom manufactured high end unit that is used in $900 home theater loudspeakers!
Even on “Talk Radio” you will notice improved intelligibility, and will find it easier to understand what is said even at lower volumes.
The Installation
The engineers at Clearwater have gone to great lengths to simplify the installation of our system. The factory speakers are simply removed and replaced with the new ones, the tweeter quickly and easily snaps into the door where the factory tweeter was located. There are no modifications needed or wires to cut. Everything simply snaps or screws into place. Detailed instructions are included to let you do this yourself. If our owner’s Mother can do it, we are confident that you can too. Complete installation time is approximately an hour.
Which system do I need?
We offer systems for cars equipped with and without the Bose option. This is very important, because the amplifier provided with the Bose stereo has a very different design from the non-Bose® radio.
Includes one pair of 8" speakers and pair of 1" tweeters. Includes wire harness.
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-CLEARWATER|,|SHOP-BY-TOP-MIATA-BRANDS|,|Clearwater Speakers|,||,||,||,||,||,||,||,||,||,||,|||-||CLICKTOENLARGE12|,||,|Click to enlarge|,|555|,||,||,||,||,||,||,|asfda|,||,||,|||-||CLTOINYOMI|,|CUSTOMERSCARS|,|Click to Include Your Miata!|,|cltoinyomi|,||,||,||,||,||,||,|adsgtasrt|,||,|Would you like to show off your Miata to the world?
The following are the guidelines to be included:
1. Please email us up to 3 good quality photos of your car. (Less then 1 MB in size)
2. Write 1-2 paragraphs about your car, and any favorite mods you got from GoMiata. (This is very important in our selection process, so please make sure you include this in your email.) Be sure to include your name and state! Also, let us know if you'd like us to include your email, so other owner's can contact you if they wish. This is completely optional. We reserve the right to edit descriptions for content and accuracy.
3. Send it all to
kay@GoMiata.com
Please be patient as we have a HUGE backlog of cars to add to the gallery. Thanks for your understanding.
|,|||-||GRBUYGOMISHT|,||,|Closed / Group Buy - Go Miata Shock Tower Brace 1990-1997 |,|GB-301-301|,|149.99|,|59.99|,||,||,|0.000 |,||,||,||,|
In order to recieve the Group Buy pricing all 5 orders need to be filled.
There are currently 2 orders needed for Group Buy pricing.
Order#1: Duane, WA
Order#2: Steven, CA
Order#3: Phil, PA
Order#4:
Order#5:
Group Buy ends 2/27/09
(Friday February 27th @ 3pm PST)
-------------------------------------------------------
Would you like to make your Miata feel much tighter through the turns? How about improved steering response and feel? This brace will do all that, plus get rid of that annoying cowl shake when you go over rail road tracks and drive on rough roads.
Our lightweight cast aluminum shock tower brace attaches easily in about 10 minutes using your existing shock tower bolts. No drilling is necessary! It provides substantially more rigidity while cornering. The GoMiata shock tower brace will greatly improve the tightness in the front of your Miata while also making steering response feel much more crisp. We could not believe how much tighter our car felt after we installed one of these. You will love it!
NOTE: Not compatible with Racing Beat Intake, will not fit cars with the larger windshield washer container, or Abs brake system. Current model does not have the 8 holes as pictured.
|,|||-||CLRSPOH|,|OWNERS-SHOWCASE|,|Clyde R. Spears
Sidney, Ohio|,|clrspoh|,||,||,||,||,||,||,|adfa|,||,|I bought my 2001 Miata from a dealer In Nashville. It was sitting on the lot equipped as a basic Miata. I liked the Color, Midnight Mica Blue, so I struck up a deal including most of the extras you see now. The dealer added a chrome style bar, larger side sills, the bigger air dam, bigger front and rear mud guards, wood trim for the cockpit , and a custom shifter. It already had a Bose system in it. I added the stainless steel grill, A stainless steel muffler and larger exhaust, a performance intake, headers, The American racing chrome wheels, chrome window sprayers, custom mats, chrome fuel door and latches for trunk lid, and a few extra up grades to the interior, stainless steel door sills, etc.
I have plans to add a Kenne Bell Supercharger, and all of the other changes necessary to support the supercharger. It is a six speed, and I love driving it. Ohio doesn't get too many "Miata days", but I have it out every chance I get. This is my gift to myself, for fighting Lymphoma Cancer for 3 years, along with a quad by-pass heart surgery. I thought I deserved it !!!!
I really love my car and I want to thank you for the opportunity to display it on your site !!! Thanks again.
Clyde R. Spears
Sidney, Ohio
|,|||-||COPEAU|,|SHOP-BY-TOP-MIATA-BRANDS|,|Cobalt|,||,||,||,||,||,||,||,||,||,||,|||-||MISWBARSETBY|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Cobalt Miata Front and Rear Sway Bar Set 2006-2010|,|CBT-920-330|,|409.99|,|339.00|,||,||,|0.000 |,||,||,||,|Cobalt Miata Front and Rear Sway Bar Set 2006-2010
The latest Mazda Miata handles well from the factory, but Mazda had to compromise in order to meet the expectations of all potential drivers.
As a result, Mazda has left room for improvement even in suspension of cars with the factory Sport package. The addition of Cobalt hollow sway bars will reduce your Miata's body roll, making your Miata more responsive to turning, more settled in transitions, and more fun to drive.
The Cobalt sway bar sets stiffness has been carefully chosen to enhance handling and balance without ruining your ride quality. The rear bar is two position adjustable.
Front bar diameter is 25 mm and rear bar is 17 mm. Includes both the front and rear bars.
|,|||-||COMAMIFLSTLI|,|MIREPA|,|CompClutch Mazda Miata Flywheel Street Light 1994-2005|,|CMC-2-746-ST|,|428.00|,|359.95|,||,||,|0.000 |,||,||,||,|CompClutch Mazda Miata Flywheel Street Light 1994-2005
The ST flywheel is recommended for naturally aspiriated and/or street driven applications. This flywheel will work with ALL performance and stock clutch assemblies.
Qualities of the CCI Lightweight Steel Flywheel:
Preserves low end torque and drive ability
One piece ring gear for high durability
Weight varies from 11 lbs. to 14 lbs. depending on application
Well suited for Stage 1 and Stage 2 clutch kit applications
Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specifications
Reduced Mass = Increased Accleration
Meets and exceeds SFI 1.5
|,|||-||COMAMIFLULLI|,|MIREPA|,|CompClutch Mazda Miata Flywheel Ultra Light 1994-2005|,|CMC-2-746-STU|,|419.00|,|343.98|,||,||,|0.000 |,||,||,||,|CompClutch Mazda Miata Flywheel Ultra Light 1994-2005
The STU flywheel is recommended for forced induction and/or track and rally racing applications. This flywheel will work with ALL performance and stock clutch assemblies.
Qualities of the CCI Ultra Lightweight Steel Flywheel:
One piece ring gear for high durability
Weight varies from 8 lbs. to 10 lbs. depending on application
Well suited for Stage 3 and up clutch kit applications
Stamped with 4140 plate with 2000 ton pressure at 1260 degrees
CNC machined and balanced to O.E. specifications
Reduced Mass = Increased Accleration
Meets and exceeds SFI 1.5
|,|||-||COMAMIST2GRC1|,|MIREPA|,|CompClutch Mazda Miata Stage 2 Clutch Kit 1990-1993|,|CMC-10036-2100|,|849.99|,|638.95|,||,||,|5.000 |,||,||,||,|CompClutch Mazda Miata Stage 2 Clutch Kit 1990-1993
Includes:
* Pressure plate
* Carbon kevlar disc
* Pilot bearing and throw out bearing
* Alignment tool
This assembly provides an estimated 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300 mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).
The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with antiburst steel backed Carbon Kevlar facings, all applicable bearings, and the appropriate alignment tool.
|,|||-||COMAMIST2GRC|,|MIREPA|,|CompClutch Mazda Miata Stage 2 Clutch With Flywheel Kit 1990-1993|,|CMC-10036_2100|,|749.99|,|638.95|,||,||,|5.000 |,||,||,||,|CompClutch Mazda Miata Stage 2 Clutch With Flywheel Kit 1990-1993
Includes:
* Pressure plate
* Flywheel
* Carbon kevlar disc
* Pilot bearing and throw out bearing
* Alignment tool
This assembly provides an estimated 80% increase in torque capacity and is properly suited for aggressive street use and moderate track use. The Carbon Kevlar material with its alloy backing matched to a performance pressure plate will provide smooth engagement and extended life. 500 mile break-in highly recommended with this set-up. 300 mile break-in REQUIRED with this set-up. (Some kits may not be supplied with all pieces. Please verify with Competition Clutch before ordering).
The 2100 Series kit includes a performance pressure plate, a high torque sprung disc with antiburst steel backed Carbon Kevlar facings, all applicable bearings, and the appropriate alignment tool.
|,|||-||COMAMIST1GRC1|,|MIREPA|,|CompClutch Mazda Miata Stage 2 Gravity Clutch Kit 1994-2005|,|CMC-10045-2100|,|586.95|,|478.95|,||,||,|5.000 |,||,||,||,|CompClutch Mazda Miata Stage 2 Gravity Clutch 1994-2005
Includes:
* Pressure plate
* Carbon kevlar disc
* Pilot bearing and throw out bearing
* Alignment tool
The economical solution for moderately modified cars or simply aggressive individuals with stock power. Offers ane estimated 40-50% of torque capacity and maintains stock pedal feel. 300 mile break-in recommended with this set-up.
DO NOT use with added forced induction such as turbo, supercharger, or NOS systems.
The 2400 Series kit includes a Competition Clutch pressure plate, a 6 pad Carbotic high-torque performance disc assembly, all applicable bearings and the appropriate alignment tool.
|,|||-||COMAMIST4CLK1|,|MIREPA|,|CompClutch Mazda Miata Stage 4 Clutch Kit 1994-2005|,|CMC-10045_1620|,|605.95|,|518.95|,||,||,|5.000 |,||,||,||,|CompClutch Mazda Miata Stage 4 Clutch Kit 1994-2005
Includes:
* Pressure plate
* 6 puck ceramic disc
* Pilot bearing and throw out bearing
* Alignment tool
This assembly, available with a double spring, six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1620 Series kit includes a performance pressure plate, a six puck high torque sprung disc with Ceramic buttons, all applicable bearings, and the appropriate alignment tool.
|,|||-||COMAMIST4CLK|,|MIREPA|,|CompClutch Mazda Miata Stage 4 Clutch With Flywheel Kit 1990-1993|,|CMC-10036_1620|,|799.99|,|638.95|,||,||,|5.000 |,||,||,||,|CompClutch Mazda Miata Stage 4 Clutch With Flywheel Kit 1990-1993
Includes:
* Pressure plate
* Flywheel
* 6 puck ceramic disc
* Pilot bearing and throw out bearing
* Alignment tool
This assembly, available with a double spring, six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides 250% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1620 Series kit includes a performance pressure plate, a six puck high torque sprung disc with Ceramic buttons, all applicable bearings, and the appropriate alignment tool.
|,|||-||COMAMIST5CLK1|,|MIREPA|,|CompClutch Mazda Miata Stage 5 Clutch Kit 1994-2005|,|CMC-10045_1420|,|595.95|,|498.95|,||,||,|5.000 |,||,||,||,|CompClutch Mazda Miata Stage 5 Clutch Kit 1994-2005
Includes:
* Pressure plate
* 4 puck ceramic disc
* Pilot bearing and throw out bearing
* Alignment tool
This assembly, available with a double spring, six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1420 Series kit includes a performance pressure plate, a four puck high torque sprung disc Ceramic buttons, all applicable bearings, and the appropriate alignment tool.
|,|||-||COMAMIST5CLK|,|MIREPA|,|CompClutch Mazda Miata Stage 5 Clutch With Flywheel Kit 1990-1993|,|CMC-10036_1420|,|849.99|,|699.98|,||,||,|5.000 |,||,||,||,|CompClutch Mazda Miata Stage 5 Clutch With Flywheel Kit 1990-1993
Includes:
* Pressure plate
* Flywheel
* 4 puck ceramic disc
* Pilot bearing and throw out bearing
* Alignment tool
This assembly, available with a double spring, six rivet carriage is good for ease of gear transition with higher horsepower. This disc complimented by a performance pressure plate provides 300% increase in torque capacity. 300 mile break-in recommended with this set-up.
The 1420 Series kit includes a performance pressure plate, a four puck high torque sprung disc Ceramic buttons, all applicable bearings, and the appropriate alignment tool.
|,|||-||COCL|,|SHOP-BY-TOP-MIATA-BRANDS|,|Competition Clutch|,||,||,||,||,||,||,||,||,||,||,|||-||61-0171H|,|19MAMIEXSYMU|,|COMPLETE PREMIUM HELMHOLTZ CHAMBER Cat-Back RoadsterSport 4 Miata Polished Stainless Steel Exhaust for 1990-1997|,|61-0171H|,|899.00|,|748.00|,||,||,||,||,||,||,|COMPLETE PREMIUM HELMHOLTZ CHAMBER Cat-Back RoadsterSport 4 Miata Polished Stainless Steel Exhaust for 90-97
FOURTH GENERATION UPDATE....A revolution in exhaust technology finally available for all 1990 through 1997 Miatas, our new HELMHOLTZ exhaust system features a standard resonator in the connecting pipe to lower volume and rasp and an exclusive all Helmholz main chamber at the back that massively reduces the standing wave inside the exhaust system! Cuts the boom frequencies of 120-130hz by over 40+db inside a top up Miata cabin which is a common source of complaints with aftermarket exhausts on the Miata. Result is all the FUN throaty sounds you want, without the drone levels other systems make that wear you out on long uphill and downhill sections of road.
Proper Sports Car sound with a deep mellow tone at cruise and a vintage bark when you put your foot into it....our premium Miata exhaust choice. Smooth perforated core and smooth bends for max power.
Muffler section is 16.5 pounds...and included connecting pipe is 8 pounds (less weight than most choices).
This Miata exhaust is the ONLY 90-97 Miata exhaust with adjustable sound! Includes fresh stainless nuts, bolts and gasket to complete your install. Includes our unique removable baffle cone tip so YOU are in control of the sound level and can adjust for extra sporty or calm it down to mellow for longer trips.
ALL STAINLESS STEEL and lifetime warranty! INCLUDES COMPLETE MIDPIPE section so that it this is a COMPLETE BOLT ON solution from your converter flange back. Built in solid 304 stainless steel and completely polished to a mirror finish, this premium Miata exhaust is our only choice that incorporates a big Helmholtz chamber to help control drone and a baffle insert that gives YOU control over the final sound level (baffle in is about 15% more sound than stock, baffle out is about 25% more sound than stock...so you always have a choice for those longer trips). And, you always have the additional option of our packed baffle to calm it down even more, which are sold here separately on this website....for a total of THREE different sound levels from the same exhaust. With an ear pleasing exhaust note, great price and easy installation this Miata exhaust is a great beginning for Miata performance modifications.
|,|"Shipping cost" "add(+$95)"|-||-|||-||CONSTYLALSHO|,||,|Concept Style (also shown above)|,|constylalsho|,||,||,||,||,||,||,||,||,||,|||-||CONTACTUS|,||,|CONTACT GO MIATA|,|contactus|,||,||,|
|,||,||,||,|asga|,||,|
Have a question about a product? Want something you don't see on our site?
Would you like to suggest a product for us to carry or develop?
Whatever the case, we love to hear from our customers! Feel free to contact us by any method below:
Want to Place An Order?
24 Hour Order Hotline
Please Have Your Item Codes Ready
ORDERS ONLY
Toll Free 1-619-466-4282
Order Desk Operators CANNOT answer product questions or provide customer service.
24 Hours a Day, 7 Days a Week
Have a Question About a Product or Need Customer Service?
Toll Free 1-619-Go-Miata / 1-619-466-4282
Customer Service & Product Questions:
Monday - Friday 9:00 AM to 5:00 PM Pacific Time
Call Direct: 1-619-466-4282
Email:
info@GoMiata.com
Mailing Address:
GoMiata
16 Technology Suite 210
Irvine, CA 92618
The address above is for correspondence or mail order only. No product pick-ups.
|,|||-||CONTACT-US|,||,|Contact Us|,||,||,||,||,||,||,||,||,||,||,|||-||SISITECAFORM|,|GAHHSOFTTOPS|,|Convertible Top Side Tension Cables for the Miata 1990-2005|,|11-18-MIA-001|,|94.00|,|49.95|,||,||,|0.000 |,||,||,||,|
Side Tension Cables for the Miata soft top.
Price is for the Pair
|,|"Select Year" "Select Here" "1990-1997" "1999-2005"|-||-|||-||COOILCONE|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Cool-Tek High Flow Oil Cooler - SALE!!!|,|203-014|,|169.99|,|129.95|,||,||,|0.000 |,||,|path this|,||,|
Cooler oil temps mean better performance and protection of your Miata's engine. Brand new from the leader in oil cooling, Perma-Cool, is the Cool-Tek Miata oil cooler kit with correct high flow 1/2" piping!
Easy to follow instructions and all necessary hardware are included. Pair this up with the Cool-Tek Oil Filter Relocation Kit for the ultimate set-up!
|,|||-||COOILFIREKIT|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Cool-Tek High Flow Oil Filter Relocation Kit|,|203-105|,|114.98|,|95.99|,||,||,|0.000 |,||,|agadf|,||,|If you've changed your own oil on your Miata lately, you know how difficult it is to access the oil filter!
With our new Oil Filter Relocation Kit, everything is included to move your filter to passenger side firewall for easy access! This kit is made with 1/2" piping to ensure unrestriced oil flow. The dimension of the thread size is 3/8" NPT.
Complete instructions and all hardware included.
Compatible with Non-ABS Miatas only.
|,|||-||COREOILTH|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Cool-Tek Remote Oil Thermostat - SALE!!!|,|203-201|,|97.43|,|89.95|,||,||,|0.000 |,||,|adfa|,||,|Designed to be used with our High Flow Oil Cooler Kit, the Cool-Tek Remote Oil Thermostat is perfect if you live in an climate that occasionally experiences extreme cold, yet still would like the use of an oil cooler during the hot summer months.
An oil thermostat provides quick engine oil warm up in extreme cold climates, and assures cooling when needed.
The thermostat begins to activate between 180-190 degrees. The valve closes and forces the oil through the oil cooler coil. Safety features assure that there are no air pockets at any time.
For use only with our Cool-Tek High Flow Oil Cooler.
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-COVERCRAFT|,|SHOP-BY-TOP-MIATA-BRANDS|,|COVERCRAFT|,||,||,||,|MAZDA MX-5 MIATA COVERCRAFT COVER, PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||COVERCRAFT-GUST-GUARD-COVER-CLAMPS|,|19MAMICARCAS|,|Covercraft Gust Guard Cover Clamps|,|ZGGARD|,|35.77|,|24.02|,||,||,|0.000 |,||,||,||,|Covercraft Gust Guard Cover Clamps
Covercraft Gust Guard™ Cover Clamps help keep your car cover from flying off in windy conditions. The removable, adjustable clamps fit any Covercraft car cover. Covercraft Gust Guard™ Cover Clamps are easy to attach and provide peace of mind when you have leave your vehicle covered for extended periods of time.
It's a good practice to remove a car cover if you're expecting windy conditions to prevent the cover from flying off. However, if you have to leave your vehicle covered at the airport or while you're away on vacation, Covercraft Gust Guard™ Cover Clamps help keep your car cover in place.
The Covercraft Gust Guard™ Cover Clamps kit includes everything you need to make two adjustable security cords that clamp to the hem in from of the front tires and behind the rear tires. Simply clamp the hem, adjust the cord's tension, and make sure the clamp is secure.
Covers should NOT be used in high wind conditions but sometimes you need to leave your vehicle covered for extended periods of time (airport, vacation, etc.) in locations where wind gust could be a problem.
Gust Guard™ helps hold your cover in place and is easy to install.
The kit includes components to make two adjustable security cords that clamp to the hem in front of the front tires and behind the rear tires.
When wind gusts get under the cover the Gust Guard helps reduce the possibility of the front and rear of the cover coming loose.
|,|||-||19SPEDWENY|,|OWNERS-SHOWCASE|,|Craig Weiss
Bronxville, NY|,|19spedweny|,||,||,||,||,||,||,|dfrg|,||,|This is my 1993 Miata Limited Edition #1119 of 1500
made worldwide. I believe these are the rarest of any
Miata ever produced. Her name is Black Betty and this
is the only red Miata interior ever offered. I bought
her in March 2003 with 78K on the clock. I purchased
her in Arizona and drove her all the way home to New
York in three days. It was a great way to get to know
my new roadster. Without a doubt, second-hand Miatas
offer the most smiles per dollar in the world of used
cars and GoMiata.com makes restoration work a breeze.
Stock LE upgrades included BBS wheels, unique exterior
and interior colors and trim, performance stereo,
Billstein shocks, ABS brakes and limited slip
differential and a spoiler package. I have since
removed the front spoiler. After lowering her by one
inch the spoiler was taking a beating.
In the last year I have made the following
modifications: Racing Beat intake from Go Miata(WOW),
Magnecor 8.5mm Miata wires from Go Miata, Splitfire
platinum tip spark plugs, 4 Tokico performance shocks
& springs (1 inch drop), seat covers, custom mats that
fit like a glove, and visor blanking
plates. Removing the sun visors and
installing the blanking plates give the car a clean
"hot-rod" look. I also recently installed new
weatherstripping for my top purchased from Go Miata and
it made a huge difference in wind-noise and leaking.
I couldn't be any happier with my Miata, or with
GoMiata.com.
Craig Weiss
Bronxville, NY
|,|||-||COB-DASH|,|NADASHBOARD|,|Custom Fit Mazda Miata Diamond Dash Cover 1990-1993|,|Cob-Dash|,|199.95|,|149.02|,||,||,||,||,||,||,|Custom Fit Mazda Miata Diamond Dash Cover 1990-1993
|,|"Select Pattern" "Select Here" "Black and Black Diamond" "White and Black Diamond" "Red and Red Diamond" "Red and Black Diamond" "Blue and Black Diamond" "Pink and Black Diamond" "Tan and Cream Diamond" "Grey and Silver Diamond"|-||-|||-||CUGTWI|,||,|Custom GT Windblock|,||,||,||,||,||,||,||,||,||,||,|||-||DAPPER-LIGHTING|,|SHOP-BY-TOP-MIATA-BRANDS|,|Dapper Lighting|,||,||,||,||,||,||,||,||,||,||,|||-||DAVIDBOWLES|,|OWNERS-SHOWCASE|,|David Bowles|,|davidbowles|,||,||,||,||,||,||,|dsfadf|,||,|My name is David Bowles and this is my Miata, "Mimi".
She's a '95 Black M-Edition, and is the second miata I
have owned. The first was a '96 Montego blue, but it
was traded for a '03 Crown Victoria...(very
upsetting). Mimi is sporting 16" Enkei MM2 wheels
surrounded by Yokohama tires. I love this car and I hope
everyone who owns one has as much fun as I do.
David Bowles,
'95 Black M-Edition
|,|||-||DAVIDROGERS|,|OWNERS-SHOWCASE|,|David Rogers|,|davidrogers|,||,||,||,||,||,||,|asfa|,||,|I bought my Miata in June 2001. I fell in love with her the moment I walked into the showroom.
I named her baby right then and there. She is a 2001 Special Edition number 303 of the 3,000
built. She is a real " head turner" and fast off the mark too. So far I haven't much modification
to her. After all why mess with perfection!
|,|||-||DIBRAU|,|SHOP-BY-TOP-MIATA-BRANDS|,|DBA USA|,||,||,||,||,||,||,||,||,||,||,|||-||DDMWORKS|,|SHOP-BY-TOP-MIATA-BRANDS|,|DDMWORKS|,||,||,||,||,||,||,||,||,||,||,|||-||DDST1ENLEKI|,|19MAMIENPESU|,|DDMWorks Maza Miata Stage 1 - Entry Level KitElk 1994-1997 |,|DDM-05-025|,|139.99|,|115.00|,||,||,|0.000 |,||,||,||,|DDMWorks Mazda Miata Stage 1 - Entry Level KitElk 1994-1997
The DDMWorks intake replaces your Mazda Miata's restrictive air box with a beautiful stainless steel heat shield and free flowing foam filter. It is a simple way to add a nice growl to your Miata and gives you some stylish under hood looks!
|,|||-||DDCOAIRINFOR1|,|19MAMIENPESU|,|DDMWorks Mazda Miata Cold Air Intake for Jackson Racing Superchargers 1994-1997|,|DDM-06-001|,|289.99|,|225.00|,||,||,|0.000 |,||,||,||,|DDMWorks Mazda Miata Cold Air Intake for Jackson Racing Superchargers 1994-1997
Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make.
The Jackson Racing supercharger is a great way to add some power to your miata, and makes it drive like it should have come from the factory. However, the superchargers intake is not the best design. The original intake pulls hot air close to your exhaust header, up to 30 degrees hotter than ambient, decreasing the air available for the supercharger and lowering the power the supercharger can make. Our intake encloses a new foam pod filter inside a stainless steel enclosure that gets fed plenty of cool air from behind the drivers side headlight. This drops your intake temps up to 30 degrees and pressurizes the intake tract leading to the supercharger, helping to maximize the power your supercharger can make. An extra benefit to our filter assembly is that it takes only a few seconds to remove the pod filter for routine cleaning. Give your supercharged Miata the intake it should have come with. If your car is a 1990-1997 and equipped with cruise control, you will need to relocate the cruise control actuator.
|,|||-||DDST1ENLEKI1|,|19MAMIENPESU|,|DDMWorks Mazda Miata Stage 1 - Entry Level KitElk 1990-1993|,|DDM-05-023|,|139.99|,|115.00|,||,||,|0.000 |,||,||,||,|DDMWorks Stage 1 - Entry Level KitElk 1990-1993
The DDMWorks intake replaces your Mazda Miata's restrictive air box with a beautiful stainless steel heat shield and free flowing foam filter. It is a simple way to add a nice growl to your Miata and gives you some stylish under hood looks!
|,|||-||DDST1ENLEKI11|,|19MAMISUANDU|,|DDMWorks Mazda Miata Stage 1 - Entry Level KitElk 1999-2005|,|DDM-06-003|,|139.99|,|115.00|,||,||,|0.000 |,||,||,||,|DDMWorks Mazda Miata Stage 1 - Entry Level KitElk 1999-2005
The DDMWorks intake replaces your Miata's restrictive air box with a beautiful stainless steel heat shield and free flowing foam filter. It is a simple way to add a nice growl to your Miata and gives you some stylish under hood looks!
|,|||-||DDST2COAIRIN|,|19MAMISUANDU|,|DDMWorks Mazda Miata Stage 2 Cold Air Intake 1999-2005|,|DDM-05-015|,|489.99|,|398.99|,||,||,|0.000 |,||,||,||,|DDMWorks Mazda Miata Stage 2 Cold Air Intake 1999-2005
It's finally here and it doesn’t get any better than this! The DDMWorks Stage 2 is a fully enclosed Cold Air intake for the naturally aspirated 1999-2005 Miata. The DDMWorks Stage 2 intake replaces your stock restrictive air box and crossover tube with a beautiful Stainless Steel fully enclosed intake, 304 Stainless Steel crossover tube and K&N filter as well as all the hardware you will need for your install. The Stage 2 is an easy install with a BIG reward! You can feel the power right away and its’ growl will make you PURRR!
|,|||-||DDMIRASU|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|DDMWorks Miata Radio Surrounds - 2 Guage|,|DDM-05-003|,|149.00|,|108.95|,||,||,|0.000 |,||,||,||,|DDMWorks Miata Radio Surrounds - 2 Guage
This radio surround fits in the non-standard radio hole in the 1990-1995 Miata's. Made of 304 stainless steel it is as strong as it is beautiful. Holes fit any standard 2 1/16" gauge and a spot to securely hold your radio in place. Add a little style and function to your Miata!
Fits all 1990-1995 Miatas and 1996-1997 Miata's with the factory upgraded radio.
|,|"Finish" "Select Here" "Black Matte"|-||-|||-||DDMIRASU1|,|NADASHBOARD|,|DDMWorks Miata Radio Surrounds - 3 Gauges|,|DDM-05-004|,|149.00|,|109.00|,||,||,|0.000 |,||,||,||,|DDMWorks Miata Radio Surrounds - 3 Gauges
This radio surround fits in the non-standard radio hole in the 1990-1995 Miata's. Made of 304 stainless steel it is as strong as it is beautiful. Holes fit any standard 2 1/16" gauge and a spot to securely hold your radio in place. Add a little style and function to your Miata! Fits all 90-95 Miatas and 96-97 Miata's with the factory upgraded radio.
Fits: non-standard radio hole in the 1990-1995 Miata's
|,|"Finish" "Black Matte"|-||-|||-||DDMIRASU2|,|NADASHBOARD|,|DDMWorks Miata Radio Surrounds - Blank |,|DDM-07-003|,|149.99|,|109.00|,||,||,|0.000 |,||,||,||,|DDMWorks Miata Radio Surrounds - Blank
This radio surround fits in the non-standard radio hole in the 1990-1995 Miata's. Made of 304 stainless steel it is as strong as it is beautiful. Holes fit any standard 2 1/16" gauge and a spot to securely hold your radio in place. Add a little style and function to your Miata! Fits all 90-95 Miatas and 96-97 Miata's with the factory upgraded radio.
Fits: non-standard radio hole in the 1990-1995 Miata's
|,|"Finish" "Black Matte"|-||-|||-||DDMIRASUUPDO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|DDMWorks Miata Radio Surrounds - Upside Down 3 Guage|,|DDM-06-008|,|149.00|,|109.00|,||,||,|0.000 |,||,||,||,|DDMWorks Miata Radio Surrounds - Upside Down 3 Guage
This radio surround fits in the non-standard radio hole in the 1990-1995 Miata's. Made of 304 stainless steel it is as strong as it is beautiful. Holes fit any standard 2 1/16" gauge and a spot to securely hold your radio in place. Add a little style and function to your Miata! Fits all 90-95 Miatas and 96-97 Miata's with the factory upgraded radio.
Fits: non-standard radio hole in the 1990-1995 Miata's
|,|"Finish" "Select Here" "Black Matte"|-||-|||-||DDSPPLWICOBL|,|DDMWORKS|,|DDMWorks Spark Plug Wire Covers, Blank design (1990-1993)|,|DDM-07-009|,|89.00|,|65.00|,||,||,|0.000 |,||,||,||,|Made of Polished Stainless Steel, our Spark Plug Wire Covers not only hide the unsightly jumble of wires but they add personality and style!
|,|||-||DDSPPLWICOBL1|,|DDMWORKS|,|DDMWorks Spark Plug Wire Covers, Blank design (1994-2000)|,|DDM-07-010|,|89.00|,|65.00|,||,||,|0.000 |,||,||,||,|Made of Polished Stainless Steel, our Spark Plug Wire Covers not only hide the unsightly jumble of wires but they add personality and style!
|,|||-||DDSPPLWICODR|,|DDMWORKS|,|DDMWorks Spark Plug Wire Covers, Dragon Tail (1990-1993)|,|DDM-07-011|,|89.00|,|65.00|,||,||,|0.000 |,||,||,||,|Made of Polished Stainless Steel, our Spark Plug Wire Covers not only hide the unsightly jumble of wires but they add personality and style!
|,|||-||DDSPPLWICODR1|,|DDMWORKS|,|DDMWorks Spark Plug Wire Covers, Dragon Tail (1994-2000)|,|DDM-07-012|,|89.00|,|65.00|,||,||,|0.000 |,||,||,||,|Made of Polished Stainless Steel, our Spark Plug Wire Covers not only hide the unsightly jumble of wires but they add personality and style!
|,|||-||DDSPPLWICOFL|,|DDMWORKS|,|DDMWorks Spark Plug Wire Covers, Flames (1990-1993)|,|DDM-07-013|,|89.00|,|65.00|,||,||,|0.000 |,||,||,||,|Made of Polished Stainless Steel, our Spark Plug Wire Covers not only hide the unsightly jumble of wires but they add personality and style!
|,|||-||DDSPPLWICOFL1|,|DDMWORKS|,|DDMWorks Spark Plug Wire Covers, Flames (1999-2000)|,|DDM-07-014|,|89.00|,|65.00|,||,||,|0.000 |,||,||,||,|Made of Polished Stainless Steel, our Spark Plug Wire Covers not only hide the unsightly jumble of wires but they add personality and style!
|,|||-||DELETEME|,||,|deleteme|,|deleteme|,|0.00|,||,||,||,|0.000 |,||,||,||,||,|||-||DIMIKEWA|,|OWNERS-SHOWCASE|,|Dianne Miller
Kent Washington|,|newitem152758240|,||,||,||,||,||,||,||,||,|I just want to let you know that I absolutely LOVE the set of Momo 10-S Black Corse wheels I recently ordered through you. Keep up the great work in finding fantastic products like this for all of us who are busy customizing our Miatas with Miata jewelry! We couldn’t do it without you.
Thank You for all you do!
(Mrs.) Dianne E. Miller
Kent, Washington
|,|||-||DONANWA|,|OWNERS-SHOWCASE|,|Don Anderson, Washington|,||,||,||,||,||,||,||,||,||,|I really like the look of the 99/2000 miatas. I was in the market for something and after many test drives I found my 99 from a private party ... Although the car looked and performed well I had visions in my head of a dark sinister roadster.
I soon discovered all the after market parts available.
Two years later my vision has come true.
Special thanks to Jake and Eliana at Go Miata for their support and advice. I trust their information and
respect that if they don't know something, they are more than willing to research and refer you to someone who does.
I get lots of looks and meet many other car enthusiasts. I plan on entering car in various show-and-shines next summer.
I have made many modifications to my baby giving it a mean look and close to 300hp at the crank.
Here is a list of my many mods:
* VF Engineering stage II super charger
* Cool Tek high flow oil filter relocation kit (located passenger side between frame rail and tranny)
* Unorthodox ultra L aluminum flywheel
* Unorthodox ultra G Kevlar clutch (sprung hub)
* SSD short throw shifter
* Carbon fiber shift knob
* Racing beat ceramic coated header (2.5")
* Roadster mid pipe (stainless 2.5")
* Racing beat tail pipe/resonator (2.5" stainless)
* Eibach pro kit 1.3" lowering springs
* Lenex smoked tail light covers (legal in certain states)
* Genuine miata front air dam
* Genuine miata small side sills
* Front license plate relocated into front air dam.
* Smoked license plate covers
* Cross drilled slotted brake rotors
* Sport max racing wheels 18"x 7.5" (minor alteration required)
* BF Goodrich G-Force T/A radial tires 225/35ZR18
Future mods:
* Roll bar
* Katzkin leather seat covers
* Strut tower brace
* Performance sway bars (front and rear)
* Big break kit w/larger rotors and 4 or 6 piston calipers
Don Anderson
Bellingham, Washington
|,|||-||DONTMISS|,||,|DON'T MISS ...|,||,||,||,||,||,||,||,||,||,||,|||-||DOKMI|,|OWNERS-SHOWCASE|,|Doug Ballard
Alma, Michigan|,|newitem109910016|,||,||,||,||,||,||,||,||,|This is my 1993 Miata with 90600 miles on it. It is in pretty good shape overall but I was still thrilled to find Go-Miata.com to spruce up some things. I got a new shift boot and a repair manual here. I have only had the car about two months and was interested to see the “shifting” suggestion on this site. I tried it, up to 5000+ rpm’s before shifting . . . wow, what a difference! I always thought the car was fun to drive, but it wasn’t fast. I was wrong, it is fast, I just wasn’t giving it what it needed. Thanks for the tip and I’ll be back for more Miata stuff!
Doug Ballard,
Alma, Michigan
|,|||-||DRAGD|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Drag |,||,||,||,||,||,||,||,||,||,||,|||-||DRAGDR19CHROME|,|DRAGD|,|Drag DR-19 Chrome|,|DRAG-DR-19-C|,|235.99|,|179.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Chrome
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0" "18.0 Add(+$36.00)"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm" "5-110.0mm" "5-120.0mm"|-||-|"Select Offset" "42" "45"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||DRDRSIMALIP|,|DRAGD|,|Drag DR-19 Silver Machined Lip|,|DRAG-DR-19-SML|,|242.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Silver Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "16.0" "17.0 Add (+$5.00)" "18.0 Add (+$25.00)"|-||-|"Select Width" "7.0" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm" "5-110.0mm"|-||-|"Select Offset" "40" "42" "47"|-||-|"Shipping Cost" "add(+$45)"|-||-|||-||DRDRGLBLLIPW|,|DRAGD|,|Drag DR-19 Gloss Black Lip with Machined Face|,|DRAG-DR-19-BLM|,|259.99|,|165.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Gloss Black Lip with Machined Face
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0" "18.0 Add(+$20.00)"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "5-100.0mm" "5-110.0mm" "5-120.0mm"|-||-|"Select Offset" "42" "45"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||DRDRGLBLMA3|,|DRAGD|,|Drag DR-19 Gloss Black Machined|,|DRAG-DR-19-GBM|,|232.99|,|159.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Gloss Black Machined
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "16.0 Add(+$10.00)" "17.0 Add(+$15.00)" "18.0 Add (+$35.00)|-||-|"Select Width" "7.0" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm" "5-110.0mm" "5-120.0mm"|-||-|"Select Offset" "40" "42" "45"|-||-|"Shipping Cost" "add(+$45)"|-||-|||-||DRDRGLBLMAFA|,|DRAGD|,|Drag DR-19 Gloss Black Machined Face|,|DRAG-DR-19-GBF|,|259.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Gloss Black Machined Face
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0" "18.0 Add(+$20.00)"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "5-100.0mm" "5-110.0mm" "5-120.0mm"|-||-|"Select Offset" "42" "45"|-||-|"Shipping and Handling fee" "add(+$45)"|-||-|||-||DRAGDR19GOLD|,|DRAGD|,|Drag DR-19 Gold|,|DRAG-DR-19-G|,|245.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Gold
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0" "18.0 Add(+$20.00)"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "42" "45"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||DRDRGUMA3|,|DRAGD|,|Drag DR-19 Gunmetal Machined|,|DRAG-DR-19-GMM|,|232.99|,|159.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Gunmetal Machined
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "17.0 Add(+$15.00)"|-||-|"Select Width" "7.0" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "40" "42" "45"|-||-|"Shipping Cost" "add(+$45)"|-||-|||-||DRDRGUMALIP|,|DRAGD|,|Drag DR-19 Gunmetal Machined Lip|,|DRAG-DR-19-GLM|,|242.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Gunmetal Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "16.0" "17.0 Add(+$5.00)" "18.0 Add(+$25.00)"|-||-|"Select Width" "7.0" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm" "5-110.0mm"|-||-|"Select Offset" "40" "42" "47"|-||-|"Shipping Cost" "add(+$45)"|-||-|||-||DRDRSIMA3|,|DRAGD|,|Drag DR-19 Silver Machined|,|DRAG-DR-19-SM|,|232.99|,|159.95|,||,||,|5.000 |,||,||,||,|Drag DR-19 Silver Machined
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "17.0 Add(+$15.00)" "18.0 Add(+$35.00)"|-||-|"Select Width" "7.0" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "40" "42" "45"|-||-|"Shipping Cost" "add(+$45)"|-||-|||-||DRDRBLREDST|,|DRAGD|,|Drag DR-20 Black Red Stripe|,|DRAG-DR-20-BRS|,|237.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-20 Black Red Stripe
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0"|-||-|"Select Width" "7.0"|-||-|"Select Bolt Pattern" "4-100.0mm"|-||-|"Select Offset" "40"|-||-|"Shipping and Handling fee" "add(+$45)"|-||-|||-||DRDRGOMALIP|,|DRAGD|,|Drag DR-20 Gold Machined Lip|,|DRAG-DR-20-GML|,|248.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-20 Gold Machined Lip
Special order - 7-10 business days to ship
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "16.0 Add(+$5.00)"|-||-|"Select Width" "7.0"|-||-|"Select Bolt Pattern" "4-100.0mm"|-||-|"Select Offset" "10"|-||-|"Shipping and Handling fee" "add(+$45)"|-||-|||-||DRDRGLBLMAFA1|,|DRAGD|,|Drag DR-20 Gold with machined face|,|DR20157261073GDM|,|249.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-20 Gold with machined face
Special order - 7-10 business days to ship
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "16.0 Add(+$5.00)"|-||-|"Select Width" "7.0"|-||-|"Select Bolt Pattern" "4-100.0mm"|-||-|"Select Offset" "10"|-||-|"Shipping and Handling fee" "add(+$45)"|-||-|||-||DRDRGUMALIP1|,|DRAGD|,|Drag DR-20 Gunmetal Machined Lip|,|DRAG-DR-20-GLM|,|237.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-20 Gunmetal Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0"|-||-|"Select Width" "7.0"|-||-|"Select Bolt Pattern" "4-100.0mm"|-||-|"Select Offset" "40"|-||-|"Shipping and Handling fee" "add(+$45)"|-||-|||-||DRDRMABR|,||,|Drag DR-23 Matte Bronze 15x6.5|,|DRAG-DR-23-MBR|,|112.99|,|99.95|,||,||,|5.000 |,||,||,||,|Drag DR-23 Matte Bronze
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0"|-||-|"Select Width" "6.5"|-||-|"Select Bolt Pattern" "4-100.0mm"|-||-|"Select Offset" "40"|-||-|||-||DRAGDR31BRONZE|,||,|Drag DR-31 Bronze|,|DRAG-DR-31-BR|,|112.99|,|99.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 Bronze
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "16.0 Add(+$10.00)" "17.0 Add(+$35.00)" "18.0 Add(+$50.00)"|-||-|"Select Width" "6.5" "7.0" "8.0"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "35" "40" "47" "48"|-||-|||-||DRAGDR31BRONZE1|,||,|Drag DR-31 Bronze 17x9|,|DRAG-DR-31-BR-17|,|169.99|,|144.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 Bronze
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0"|-||-|"Select Width" "9.0"|-||-|"Select Bolt Pattern" "5-100.0mm"|-||-|"Select Offset" "17"|-||-|||-||DRDRCHGR|,||,|Drag DR-31 Charcoal Grey|,|DRAG-DR-31-CG|,|122.99|,|109.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 Charcoal Grey
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "16.0" "17.0 Add(+$35.00)" "18.0 Add(+$54.00)"|-||-|"Select Width" "7.0" "9.0"|-||-|"Select Bolt Pattern" "5-100.0mm"|-||-|"Select Offset" "15" "17" "28" "38" "40"|-||-|||-||DRDRFLBLREDL1|,||,|Drag DR-31 Flat Black Red Lip|,|DRAG-DR-31-FBR-17|,|169.99|,|144.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 Flat Black Red Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0" "18.0 Add(+$5.00)"|-||-|"Select Width" "8.0" "9.0"|-||-|"Select Bolt Pattern" "5-100.0mm"|-||-|"Select Offset" "17" "28" "35" "38" "48"|-||-|||-||DRDRFLBLREDL|,||,|Drag DR-31 Flat Black Red Lip|,|DRAG-DR-31-FBR|,|112.99|,|99.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 Flat Black Red Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "17.0 Add(+$35.00)"|-||-|"Select Width" "6.5" "8.0"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "35" "40" "47"|-||-|||-||DRDRFLBLREDL2|,||,|Drag DR-31 Flat Black Red Lip 18x9|,|DRAG-DR-31-FBR-18|,|184.99|,|163.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 Flat Black Red Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "18.0"|-||-|"Select Width" "9.0"|-||-|"Select Bolt Pattern" "5-100.0mm"|-||-|"Select Offset" "15" "28" "38"|-||-|||-||DRDRFLGO|,||,|Drag DR-31 Flat Gold|,|DRAG-DR-31-FG|,|112.99|,|99.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 Flat Gold
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "16.0 Add(+$10.00)" "18.0 Add(+$50.00)"|-||-|"Select Width" "6.5" "7.0" "8.0"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select offset" "40" "48"|-||-|||-||DRAGDR31SILVER|,||,|Drag DR-31 Silver 14x5.5|,|DRAG-DR-31-S|,|109.99|,|88.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 Silver
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "14.0"|-||-|"Select Width" "5.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "35"|-||-|||-||DRAGDR31WHITE|,||,|Drag DR-31 White |,|DRAG-DR-31-W|,|112.99|,|99.95|,||,||,|5.000 |,||,||,||,|Drag DR-31 White
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "16.0 Add(+$10.00)" "17.0 Add(+$35.00)" "18.0 Add(+$50.00)"|-||-|"Select width" "6.5" "7.0" "8.0"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "35" "40" "47" "48"|-||-|||-||DRDRGLBLMALI10|,|DRAGD|,|Drag DR-44 Gloss Black Machined Lip|,|DRAG-DR-44-GBL|,|242.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-44 Gloss Black Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "17.0 Add(+$15.00)"|-||-|"Select Width" "7.0" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "40" "42" "45"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||DRDRGOMALIP5|,|DRAGD|,|Drag DR-44 Gold Machined Lip|,|DRAG-DR-44-GML|,|232.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-44 Gold Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "17.0 Add(+$15.00)"|-||-|"Select Width" "7.0" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "40" "45"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||DRDRGUMALIP6|,|DRAGD|,|Drag DR-44 Gunmetal Machined Lip|,|DRAG-DR-44-GLM|,|242.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-44 Gunmetal Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0" "17.0 Add(+$15.00)"|-||-|"Select Width" "7.0" "7.5"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "40" "42" "45"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||DRDRGLBLMALI11|,||,|Drag DR-45 Gloss Black Machined Lip |,|DRAG-DR-45-GBL|,|125.99|,|114.95|,||,||,|5.000 |,||,||,||,|Drag DR-45 Gloss Black Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "5-120.0mm"|-||-|"Select Offset" "42"|-||-|||-||DRDRGOMALIP6|,|DRAGD|,|Drag DR-45 Gold Machined Lip|,|DRAG-DR-45-GML|,|255.99|,|179.95|,||,||,|5.000 |,||,||,||,|Drag DR-45 Gold Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "5-120.0mm"|-||-|"Select Offset" "42"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||DRDRHYBL2|,|DRAGD|,|Drag DR-45 Hyper Black|,|DRAG-DR-45-HB|,|255.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-45 Hyper Black
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "5-120.0mm"|-||-|"Select Offset" "42"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||DRDRHYSI2|,|DRAGD|,|Drag DR-45 Hyper Silver|,|DRAG-DR-45-HS|,|255.99|,|169.95|,||,||,|5.000 |,||,||,||,|Drag DR-45 Hyper Silver
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0"|-||-|"Select Width" "7.5"|-||-|"Select Bolt Pattern" "5-120.0mm"|-||-|"Select Offset" "42"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||DRDRGLBLMALI12|,||,|Drag DR-46 Gloss Black Machined Lip|,|DRAG-DR-46-GBL|,|112.99|,|99.95|,||,||,|5.000 |,||,||,||,|Drag DR-46 Gloss Black Machined Lip
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "15.0"|-||-|"Select Width" "7.0"|-||-|"Select Bolt Pattern" "4-100.0mm"|-||-|"Select Offset" "10 Add(+$5.00)" "40"|-||-|||-||DRDRFLBL8|,||,|Drag DR-9 Flat Black|,|DRAG-DR-9-FB|,|125.99|,|114.95|,||,||,|5.000 |,||,||,||,|Drag DR-9 Flat Black
Recognized as one of the premier wheel companies, Drag Wheels is driven by the pure passion of JDM. The strength and philosophy of Drag Wheels are forged from the commitment to develop some of the finest in designs and styles. Drag Wheels kept true to a clean, sleek and stylish concept. The increasingly popular JDM influence in the North American market has inspired much of the products to mimic such fashion. To exceed the market's expectation, Drag Wheels unveils a collection of Japanese inspired design capturing the JDM enthusiasm. Utilizing the most advanced breakthrough technologies; such as, the patented self-locking chrome stainless steel lips, Drag Wheels positions itself above the competition. Drag, drift and street; Drag Wheels delivers the passion.
|,|"Select Diameter" "17.0" "18.0 Add(+$30.00)"|-||-|"Select Width" "7.0"|-||-|"Select Bolt Pattern" "4-100.0mm" "5-100.0mm"|-||-|"Select Offset" "40"|-||-|"Shipping Cost" "add(+$29.99)"|-||-|||-||DUDIDZ|,|DUNLOPTIRES|,|Dunlop Direzza DZ1012|,|TR-DUNLOPDRZADZ102|,|149.99|,|119.00|,||,||,|5.000 |,||,||,||,|Dunlop Direzza DZ1012
The Direzza DZ102 is Dunlop's Ultra High Performance Summer tire developed for sports car, sports coupe and performance sedan driving enthusiasts. Designed to combine sleek styling and impressive handling, the Direzza DZ102 delivers head-turning performance in warm, dry and wet conditions, however it is not intended to be driven in near-freezing temperatures, through snow or on ice.
Direzza DZ102 tires feature Dunlop's specially formulated Silicarbon Matrix tread compound (combines silica and carbon black) to enhance traction. The compound is molded into a directional tread design featuring broad shoulder blocks and three notched central ribs to promote responsive handling and stable cornering. Wide circumferential tread channels enhance hydroplaning resistance and wet traction.
The tire's internal structure includes twin steel belts reinforced by Dunlop's Jointless Band (JLB) spirally wound polyamide cord cap ply to stabilize the tread area for enhanced treadwear, handling and high-speed capability. A polyester cord body enhances ride quality while Max Flange Shields adjacent to the beads help resist rim damage due to accidental curbing.
Price Per Tire, order 4 for full set**
|,|"Select Size""195/50 R15""205/50 R16 add(+$35)""215/45 R17 add(+$50)"|-||-|"Shipping & Handing" "add(+$39)"|-||-|||-||DUDISPZ1STSP|,|DUNLOPTIRES|,|Dunlop Direzza ZIII |,|TR-DUNLOPDRZZAZ3|,|189.99|,|155.00|,||,||,|5.000 |,||,||,||,|Dunlop Direzza ZIII
The Direzza ZIII is Dunlop's Extreme Performance Summer tire designed for the drivers of sports cars, performance sedans and track day vehicles who are looking for near motorsports levels of traction and handling in a tire that can be driven on the street, in addition to autocross, drifting and track day events. Tuned for maximum performance in warm, dry and damp conditions, the Direzza ZIII is not intended to be serviced, stored, nor driven in near- and below-freezing temperatures, through snow or on ice.
Continuing the evolution of Dunlop's Extreme Performance Summer tire line, the Direzza ZIII utilizes the company's latest high-performance compound, which features motorsports-derived polymers that accomplish the normally conflicting goals of enhanced grip and enhanced wear characteristics. The updated tread pattern features a wider center rib and lower void ratio to put more rubber on the ground in the contact patch, and the reshaped tread profile changes the shape of the footprint to ensure more uniform contact pressure while turning, aiding grip and improving wear. The two main, circumferential grooves allow water to flow through the footprint to resist hydroplaning, but heavy rain and standing water may still present challenges to longitudinal and lateral hydroplaning resistance, so drivers should take care and drive cautiously at reduced speeds in these conditions.
The internal construction of the Direzza ZIII is designed for optimized durability and maximum handling response. The two-ply polyester casing sits beneath two wide, high-strength steel belts, which help stabilize the footprint. Two polyamide cap plies provide reinforcement for enhanced control of the contact patch and high-speed durability.
Note: Tires exposed to temperatures of 20 degrees F (-7 degrees C) or lower must be permitted to gradually return to temperatures of at least 40 degrees F (5 degrees C) for at least 24 hours before they are flexed in any manner, such as by adjusting inflation pressures, mounting them on wheels, or using them to support, roll or drive a vehicle.
Flexing of the specialized rubber compounds used in Extreme Performance Summer tires during cold-weather use can result in irreversible compound cracking. Compound cracking occurs as the result of improper use or storage, and Dunlop's warranty specifically excludes tires exhibiting this condition from coverage. Any tires exhibiting compound cracking must be replaced.
Price Per Tire, order 4 for full set**
|,|"Select Size""185/60 R14 add(+$25)" "195/50 R15" "195/55 R15 add(+$30)" "205/50 R15 add(+$30)" "205/50 R16 add(+$20)" "205/55 R16 add(+$30)"|-||-|"Shipping & Handing" "add(+$39)"|-||-|||-||DUSPWISPM3|,|DUNLOPTIRES|,|Dunlop SP Winter Sport M3|,|TR-DUNLOPSPWINTERM3|,|169.99|,|145.02|,||,||,|5.000 |,||,||,||,|Dunlop SP Winter Sport M3 Performance Winter / Snow tires were developed for sports cars, coupes and sedans that come from the factory equipped with low profile tires mounted on large diameter alloy wheels. SP Winter Sport M3 tires are designed to blend dry road performance with cold temperature traction whether roads are snow-covered or not.
The SP Winter Sport M3 features a silica-based tread compound that remains pliable in cold temperatures. Using Dunlop V-Technology, this compound is molded into a directional tread design that helps maintain good traction on wet and slush-covered roads while its high-density lateral zigzag sipes and independent tread blocks provide the edges to help bite into snow.
Dunlop SP Winter Sport M3 winter / snow radials meet the industry's severe snow service requirements and are branded with the mountain/snowflake symbol.
Install SP Winter Sport M3 tires in sets of four only.
Do not mix radial winter / snow tires with tires of other construction, size, ply rating, or pattern type. Dunlop highly recommends fitment of four winter / snow tires of the same type and rating for optimum mud and snow traction as well as to maintain vehicle handling characteristics.
Price Per Tire, order 4 for full set**
|,|"Select Size""225/60 R15""225/60 R16 add(+$20)""215/50 R17 add(+$40)"|-||-|"Shipping & Handing" "add(+$39)"|-||-|||-||DUNLOPTIRES|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Dunlop Tires|,||,||,||,||,||,||,||,||,||,||,|||-||DY19ST1VSST2|,||,|Dyno: 1999 stage 1 vs stage 2|,||,||,||,||,||,||,||,||,||,||,|||-||DY19STVSST1|,||,|Dyno: 1999 stock vs stage 1|,||,||,||,||,||,||,||,||,||,||,|||-||DYNO2001STAGE1|,||,|Dyno: 2001 stage 1|,||,||,||,||,||,||,||,||,||,||,|||-||EBC-DOT-4-BRAKE-FLUID--1L-|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|EBC DOT-4 Brake Fluid (1L)|,|BF004-L|,|14.99|,||,||,||,||,||,||,||,|EBC DOT-4 Brake Fluid (1L)
General purpose glycol fluid has a dry boiling point of 268C (514F) and a minimum wet boiling point of 165C (329F) for most modern motorcycle and automotive brake systems. CANNOT be mixed with Dot 5 silicone fluids.
|,|||-||8727-17734-|,|NEW|,|Edelbrock® E-Force™ Stage 1 Supercharger System 2016-2019|,|8727-17734|,|5,294.00|,|4,670.99|,||,||,||,||,||,||,|Edelbrock® E-Force™ Stage 1 Supercharger System 2016-2019
E-Force™ Stage 1 Supercharger System by Edelbrock®. Designed utilizing the latest technology, this product by Edelbrock features premium quality and will perform better than advertised. Perfect for your vehicle and lifestyle, it is manufactured to meet or exceed stringent industry standards.
Notes: This is a CARB compliant part, legal for use on vehicles built to meet CARB standards and/or registered in California and other states which follow CARB standards (CARB EO: D-215-95).
Features:
Designed to deliver trouble-free, consistent performance
Right for your vehicle and lifestyle
Made from high-quality materials for ultimate durability
Manufactured to meet or exceed strict quality requirements
Edelbrock® Corporation has seven locations: four in Torrance and three in San Jacinto, California, totaling to over 500,000 square feet. Torrance headquarters include R&D, manufacturing, state-of-the-art testing facilities, advertising, and tech support. The company's Aluminum Foundries are located close by in San Jacinto. In 2008, they added a new Permanent Mold and Heat Treat facility next to the existing sand cast foundry, which has been called "the most state-of-the-art sand cast foundry west of the Mississippi." This investment in American facilities is part of Edelbrock's commitment to "Made in USA" products and performance.
|,|"Shipping and Handling" "add(+$125)"|-||-|||-||99EIBLOWSPRI|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Eibach Pro-Kit 1.3" Lowering Springs 1999-2005|,|eib5535-140|,|399.00|,|314.99|,||,||,|0.000 |,||,||,||,|The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It´s our legendary spring system that dramatically improves both a vehicle´s performance and appearance.
Pro-Kit lowers your car´s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.
Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.
*Features*
* High Performance Handling and Aggressive Good Looks
* Lower Center of Gravity -- Lowers Vehicle 1.0" - 1.5" (lowering amount varies by application𠓾se our application look-up for specific information on lowering for your car or truck)
* Stop Quicker, Corner Faster and get Better MPG
* Progressive Spring Design for Excellent Ride Quality
* Million Mile Warranty
|,|||-||ELIANA123|,||,|ELIANA BORJA CUSTOMER SERVICE MANAGER Eliana@GoMiata.com|,||,||,||,||,||,||,||,||,||,||,|||-||ELBOCUSEMA|,||,|ELIANA BORJA
CUSTOMER SERVICE MANAGER
Eliana@GoMiata.com|,|newitem144971648|,||,||,||,||,||,||,||,||,||,|Eliana Borja : Customer Service Manager|-||-|||-||ELVINHOLLIDAY|,|OWNERS-SHOWCASE|,|Elvin Holliday|,|elvinholliday|,||,||,||,||,||,||,|asdfa|,||,|I love my Miata. My wife bought this for my 50th birthday two years ago. It's a 2001 Se with the 6 speed. Our friends have the BMW Z-3 and it's amazing to watch peoples eyes to see these two cars together. I feel more people look at the Miata more. We enjoy your web site.
Elvin Holliday,
01' Black
|,|||-||PARTS---PERFORMANCE-ENGINE-PERFORMANCE|,||,|ENGINE PERFORMANCE|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-ENGINE-PERFORMANCE-1990-1993|,|PARTS---PERFORMANCE-ENGINE-PERFORMANCE|,|ENGINE PERFORMANCE (1990-1993)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-ENGINE-PERFORMANCE-1994-2005|,|PARTS---PERFORMANCE-ENGINE-PERFORMANCE|,|ENGINE PERFORMANCE (1994-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-ENGINE-PERFORMANCE-2006-2009|,|PARTS---PERFORMANCE-ENGINE-PERFORMANCE|,|ENGINE PERFORMANCE (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||61-0857|,|ENPEWH|,|Enkei 92, Classic Series with Machined Lip 15x7|,|61-0857|,|220.00|,|189.00|,||,||,||,||,||,||,|Enkei 92, Classic Series with Machined Lip 15x7
5x7, 38mm, 4x100, 14.1 lbs
Enkei Wheels is bringing back its Enkei92, reviving a classic wheel associated with the heydays of import car tuning. The true old school mesh wheel is the latest addition from the Japanese wheel manufacturer. Offering deep lips and aggressive offsets, Enkei promises to bring a new level of excitement to the wheel market.
Staying true to its roots, Enkei will offer the legendary Enkei92 in 15 x 7 ET38 and 15 x 8 ET25 variants. All versions of the Enkei92 will come with a deep polished lip and the choice of a silver, black, or gold face with an original retro design center cap. The Enkei92 offers import enthusiasts genuine old school design with superior performance that imitators cannot match.
|,|"Select Color" "Select Here" "Black" "Silver" "Gold"|-||-|"Shipping & Handling" "add(+$55)"|-||-|||-||61-0858|,|ENPEWH|,|Enkei 92, Classic Series with Machined Lip 15x8|,|61-0858|,|245.00|,|209.00|,||,||,||,||,||,||,|Enkei 92, Classic Series with Machined Lip 15x8
15x8, 25mm, 4x100, only 15.1 lbs
Enkei Wheels is bringing back its Enkei92, reviving a classic wheel associated with the heydays of import car tuning. The true old school mesh wheel is the latest addition from the Japanese wheel manufacturer. Offering deep lips and aggressive offsets, Enkei promises to bring a new level of excitement to the wheel market.
Staying true to its roots, Enkei will offer the legendary Enkei92 in 15 x 7 ET38 and 15 x 8 ET25 variants. All versions of the Enkei92 will come with a deep polished lip and the choice of a silver, black, or gold face with an original retro design center cap. The Enkei92 offers import enthusiasts genuine old school design with superior performance that imitators cannot match.
|,|"Select Color" "Select Here" "Black" "Silver" "Gold"|-||-|"Shipping & Handling" "add(+$55)"|-||-|||-||ENPEEDBL15|,|ENPEWH|,|Enkei Performance EDR9 Black 15x6.5|,|TR-ENKIEDR9BKB15x6-5|,|181.99|,|145.95|,||,||,|5.000 |,||,||,||,|Enkei Performance EDR9 Black 15x6.5
Front and Rear
* Size: 15x6.5
* Offset: +38mm
* Backspacing: 5.19"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 16.6lbs
* Finish: Black
* Construction: 1 Pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||ENPEEDBL16|,|ENPEWH|,|Enkei Performance EDR9 Black 16x7|,|TR-ENKIEDR9BKB16x7|,|205.99|,|149.98|,||,||,|5.000 |,||,||,||,|Enkei Performance EDR9 Black 16x7
Front and Rear
* Size: 16x7
* Offset: +38mm
* Backspacing: 5.47"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 16.6lbs
* Finish: Black
* Construction: 1 Pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||ENPEEDBL17|,|ENPEWH|,|Enkei Performance EDR9 Black 17x7|,|TR-ENKIEDR9BKB17x7|,|227.99|,|177.99|,||,||,|5.000 |,||,||,||,|Enkei Performance EDR9 Black 17x7
Front and Rear
* Size: 17x7
* Offset: +38mm
* Backspacing: 5.47"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 16.6lbs
* Finish: Black
* Construction: 1 Pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||ENPEEDBRSI15|,|ENPEWH|,|Enkei Performance EDR9 Bright Silver 15x6.5|,|TR-ENKIEDR9BRTSLV15x6-5|,|181.99|,|139.98|,||,||,|5.000 |,||,||,||,|Enkei Performance EDR9 Bright Silver 15x6.5
Front and Rear
* Size: 15x6.5
* Offset: +38mm
* Backspacing: 5.19"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 16.6lbs
* Finish: Bright Silver
* Construction: 1 Pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||ENPEEDBRSI16|,|ENPEWH|,|Enkei Performance EDR9 Bright Silver 16x7|,|TR-ENKIEDR9BRTSLV16x7|,|195.99|,|159.99|,||,||,|5.000 |,||,||,||,|Enkei Performance EDR9 Bright Silver 16x7
Front and Rear
* Size: 16x7
* Offset: +45mm
* Backspacing: 5.70"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 16.6lbs
* Finish: Bright Silver
* Construction: 1 Pc. Gravity cast w/MAT Technology
* Finish Warranty: 1year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||ENPEEDBRSI17|,|ENPEWH|,|Enkei Performance EDR9 Bright Silver 17x7|,|TR-ENKIEDR9BRTSLV17x7|,|227.99|,|177.99|,||,||,|5.000 |,||,||,||,|Enkei Performance EDR9 Bright Silver 17x7
Front and Rear
* Size: 17x7
* Offset: +45mm
* Backspacing: 5.70"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 16.6lbs
* Finish: Bright Silver
* Construction: 1 Pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||ENPEES6GUWLI|,|ENPEWH|,|Enkei Performance ES6 Gunmetal w/Machined Lip 16x7|,|TR-ENKIES6GNMTLMCH16x7|,|189.99|,|149.99|,||,||,|5.000 |,||,||,||,|Enkei Performance ES6 Gunmetal w/Machined Lip 16x7
Front and Rear
* Size: 16x7
* Offset: +38mm
* Backspacing: 5.47"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 19.5lbs
* Finish: Gunmetal w/Mach Lip
* Construction: 1 Pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||TR-FD-05-MACHINED-W-BLACK-ACCENT|,|ENPEWH|,|Enkei Performance FD-05 Machined w/Black Accent|,|tr-fd-05-machined-w-black-accent|,|189.85|,|139.98|,||,||,||,||,||,||,|Enkei Performance FD-05 Machined w/Black Accent
Description
* Size: 15x7
* Offset: 38mm
* Backspacing: 5.47"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 18.1 lbs.
* Finish: Machined w/Black Accent
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufacturer Part #: 434-570-4938BKM
* Manufactured in: Thailand
* Size: 17x7
* Offset: 40mm
* Backspacing: 5.51"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 21.0 lbs.
* Finish: Machined w/Black Accent
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufacturer Part #: 434-770-4940BKM
* Manufactured in: Thailand
*Features MAT Technology for weight reduction and strength
*Center cap shown included at no charge.
*Price per rim. Order quantity 4 for full set
|,|"Select Size" "15 x 7, 38mm Offset" "17 x 7, 40mm Offset add(+30)"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||TR-J10|,|ENPEWH|,|Enkei Performance J10 Machined Lip|,|tr-j10|,|209.95|,|146.02|,||,||,||,||,||,||,|Enkei Performance J10 Machined
Description
* Size: 15x6.5
* Offset: 38mm
* Backspacing: 5.24"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 14.6 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
* Size: 16x7
* Offset: 42mm
* Backspacing: 5.63"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 16.6 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
* Size: 17x7.5
* Offset: 42mm
* Backspacing: 5.63"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 18.6 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
Included Hardware
The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(1) 19/21mm lug installation tool for 8-spline
(16) Required lugnut for vehicle (nickel plated)
*Price per rim. Order quantity 4 for full set*
|,|"Select Finish" "Black w/Mach Lip" "Silver w/Machined Lip"|-||-|"Select Size" "15x6.5, 38mm Offset" "16x7, 42mm Offset add(+$35)" "17x7, 42mm Offset add(+$45)"|-||-|"Shipping & Handling" "add(+$49)"|-||-|||-||TR-M52|,|ENPEWH|,|Enkei Performance M52|,|tr-m52|,|165.85|,|142.01|,||,||,||,||,||,||,|Enkei Performance M52
Description:
* Size: 15x6.5
* Offset: 38mm
* Backspacing: 5.24"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 15.7 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
10-spoke
One-piece, cast
Snap-in center cap, exposed lugs
Features MAT Technology for weight reduction and strength
Center cap shown included at no charge.
Included Hardware
The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(16) Required lugnut for vehicle (nickel plated)
*Price per rim. Order quantity 4 for full set*
|,|"Select Finish" "Black Painted"|-||-|"Select Size" "15x6.5, 38mm Offset"|-||-|"Shipping cost" "add(+$39)"|-||-|||-||TR-PSR5|,|ENPEWH|,|Enkei Performance PSR5 15x6.5, 38mm Offset|,|tr-psr5|,|120.00|,|109.05|,||,||,||,||,||,||,|Enkei Performance PSR5 15x6.5, 38mm Offset
Description:
- Size: 15x6.5
- Offset: 38mm
- Backspacing: 5.24"
- Bolt Pattern: 4-100
- Rec. Tire Size: 195/50-15
- Weight: 16.2 lbs.
- Construction: 1pc. Tilt Cast
- Finish Warranty: 1 year
- Manufactured in: Thailand
Features:
- Five-spoke
- One-piece, cast
- Snap-in, exposed lugs
- Center cap shown included at no charge.
The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(16) Required lugnut for vehicle (nickel plated)
*Price per rim. Order quantity 4 for full set*
|,|"Select Finish" "Hyper Black" "Black Painted add(+$2)"|-||-|"Shipping cost" "add(+$39)"|-||-|||-||TR-RSF5|,|ENPEWH|,|Enkei Performance RSF5 |,|tr-rsf5|,|169.90|,|145.02|,||,||,||,||,||,||,|Enkei Performance RSF5
Description:
- Size: 15x6.5
- Offset: 38mm
- Backspacing: 5.24"
- Bolt Pattern: 4-100
- Rec. Tire Size: 195/50-15
- Weight: 16.4 lbs.
- Construction: 1pc. Gravity Cast
- Finish Warranty: 1 Year
- Manufactured in: Thailand
- Size: 16x7
- Offset: 38mm
- Backspacing: 5.51"
- Bolt Pattern: 4-100
- Weight: 18.5 lbs.
- Rec. Tire Size: 205/45-16
- Construction: 1pc. Gravity Cast
- Finish Warranty: 1 Year
- Manufactured in: Thailand
Features:
- Five split spokes
- One-piece, cast
- Snap-in center cap, exposed lugs
- Features MAT Technology for weight reduction and strength
- Center cap shown included at no charge.
The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(16) Required lugnut for vehicle (nickel plated)
*Price per rim. Order quantity 4 for full set*
|,|"Select Finish" "Black Painted" "Hyper Silver add(+$10)" "Silver Machined w/Clearcoat - 15x6.5 add(+$10)"|-||-|"Select Size" "15x6.5" "16x7 add(+$15)"|-||-|"Shipping cost" "add(+$39)"|-||-|||-||ENPEWH|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Enkei Performance Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||TR-YS5|,|ENPEWH|,|Enkei Performance YS5|,|tr-ys5|,|207.90|,|159.02|,||,||,||,||,||,||,|Enkei Performance YS5
Description:
- Size: 15x6.5
- Offset: 38mm
- Backspacing: 5.28"
- Bolt Pattern: 4-100
- Rec. Tire Size: 195/50-15
- Weight: 16.7 lbs.
- Construction: 1pc. Gravity Cast
- Finish Warranty: 1 Year
- Size: 16x7
- Offset: 38mm
- Backspacing: 5.51"
- Bolt Pattern: 4-100
- Rec. Tire Size: 205/45-16
- Weight: 19.4 lbs.
- Construction: 1pc. Gravity Cast
- Finish Warranty: 1 Year
Features:
- Center cap shown included at no charge.
The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(16) Required lugnut for vehicle (nickel plated)
*Price per rim. Order quantity 4 for full set*
|,|"Select Finish" "Black Painted" "Hyper Black add(+$15)"|-||-|"Select Size" "15x6.5, 38mm Offset" "16x7, 38mm Offset add(+$29)"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||ENRAPFBL17|,|ENRAWH|,|Enkei Racing PF01 Black 17x7|,|TR-ENKIPF01BKB17x7|,|328.99|,|299.95|,||,||,|5.000 |,||,||,||,|Enkei Racing PF01 Black 17x7
Front and Rear
* Size: 17x7
* Offset: 38mm
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: Not Available
* Finish: Black
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRAPFBRSI15|,|ENRAWH|,|Enkei Racing PF01 Bright Silver 15x7|,|TR-ENKIPF01BRTSLV15x7|,|286.99|,|249.95|,||,||,|5.000 |,||,||,||,|Enkei Racing PF01 Bright Silver 15x7
Front and Rear
* Size: 15x7
* Offset: 35mm
* Backspacing: 5.31"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 12.2lbs
* Finish: Bright Silver
* Construction: 1pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRAPFBRSI16|,|ENRAWH|,|Enkei Racing PF01 Bright Silver 16x7|,|TR-ENKIPF01BRTSLV16x7|,|304.99|,|279.95|,||,||,|5.000 |,||,||,||,|Enkei Racing PF01 Bright Silver 16x7
Front and Rear
* Size: 16x7
* Offset: 43mm
* Backspacing: 5.66"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 12.2lbs
* Finish: Bright Silver
* Construction: 1pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRAPFBRSI17|,|ENRAWH|,|Enkei Racing PF01 Bright Silver 17x7|,|TR-ENKIPF01BRTSLV17x7|,|313.99|,|279.95|,||,||,|5.000 |,||,||,||,|Enkei Racing PF01 Bright Silver 17x7
Front and Rear
* Size: 17x7
* Offset: 38mm
* Backspacing: 5.43"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 12.2lbs
* Finish: Bright Silver
* Construction: 1pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRARPBL15|,|ENRAWH|,|Enkei Racing RPF1 Black 15x7|,|TR-ENKIRPF1BKB15x7|,|279.99|,|249.95|,||,||,|5.000 |,||,||,||,|Enkei Racing RPF1 Black 15x7
Front and Rear
* Size: 15x7
* Offset: +35mm
* Backspacing: 5.31"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 9.9lbs
* Finish: Black
* Construction: 1 Pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRARPBL16|,|ENRAWH|,|Enkei Racing RPF1 Black 16x7|,|TR-ENKIRPF1BKB16x7|,|299.99|,|269.95|,||,||,|5.000 |,||,||,||,|Enkei Racing RPF1 Black 16x7
Front and Rear
* Size: 16x7
* Offset: +43mm
* Backspacing: 5.66"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 9.9lbs
* Finish: Black
* Construction: 1 Pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRARPBL17|,|ENRAWH|,|Enkei Racing RPF1 Black 17x7|,|TR-ENKIRPF1BKB17x7|,|295.99|,|259.95|,||,||,|5.000 |,||,||,||,|Enkei Racing RPF1 Black 17x7
Front and Rear
* Size: 17x7
* Offset: +43mm
* Backspacing: 5.62"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 9.9lbs
* Finish: Black
* Construction: 1 Pc.gravity Cast w/MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRARPBRSI14|,|ENRAWH|,|Enkei Racing RPF1 Bright Silver 14x7|,|TR-ENKIRPF1BRTSLV14x7|,|255.99|,|239.95|,||,||,|5.000 |,||,||,||,|Enkei Racing RPF1 Bright Silver 14x7
Front and Rear
* Size: 14x7
* Offset: 28mm
* Backspacing: 5.08"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/60-14
* Weight: 8.4lbs
* Finish: Bright Silver
* Construction: 1pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRARPBRSI15|,|ENRAWH|,|Enkei Racing RPF1 Bright Silver 15x7|,|TR-ENKIRPF1BRTSLV15x7|,|269.99|,|249.95|,||,||,|5.000 |,||,||,||,|Enkei Racing RPF1 Bright Silver 15x7
Front and Rear
* Size: 15x7
* Offset: 35mm
* Backspacing: 5.31"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 8.4lbs
* Finish: Bright Silver
* Construction: 1pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRARPBRSI16|,|ENRAWH|,|Enkei Racing RPF1 Bright Silver 16x7|,|TR-ENKIRPF1BRTSLV16x7|,|279.99|,|259.99|,||,||,|5.000 |,||,||,||,|Enkei Racing RPF1 Bright Silver 16x7
Front and Rear
* Size: 16x7
* Offset: 43mm
* Backspacing: 5.66"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 8.4lbs
* Finish: Bright Silver
* Construction: 1pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRARPBRSI17|,|ENRAWH|,|Enkei Racing RPF1 Bright Silver 17x7|,|TR-ENKIRPF1BRTSLV17x7|,|295.99|,|269.95|,||,||,|5.000 |,||,||,||,|Enkei Racing RPF1 Bright Silver 17x7
Front and Rear
* Size: 17x7
* Offset: 43mm
* Backspacing: 5.62"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 8.4lbs
* Finish: Bright Silver
* Construction: 1pc. Gravity Cast w/ MAT Technology
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39)"|-||-|||-||TR-ENKIRPF1SPECIALBRILLIANTCOATING|,|ENRAWH|,|Enkei Racing RPF1 Special Brilliant Coating 15x8, 28mm Offset|,|tr-enkirpf1specialbrilliantcoating|,|365.25|,|309.00|,||,||,||,||,||,||,|Enkei Racing RPF1 Special Brilliant Coating 15x8
* Size: 15x8
* Offset: 28mm
* Backspacing: Not Available
* Bolt Pattern: 4-100
* Rec. Tire Size: 225/45-15
* Weight: Not Available
* Finish: Special Brilliant Coating
* Construction: 1pc. Tilt Cast w/Flow Forming
* Finish Warranty: 1 Year
* Manufacturer Part #: 3795804928SBC
* Manufactured in: Japan
*Price per rim. Order quantity 4 for full set*
* Features MAT Technology for weight reduction and strength
* Center cap not included. Center cap is not available.
|,|"Shipping Cost" "add(+$39)"|-||-|||-||ENRAWH|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Enkei Racing Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||ENOWSH|,|CUSTOMERSCARS|,|Enter the Owner Showcase!|,||,||,||,||,||,||,||,|adfasd|,||,||,|||-||ERZ|,|ENOWSH|,|Eric Z.
Michigan|,|erz|,||,||,||,||,||,||,|sdfasdf|,||,|All I can say is that I love my car!
|,|||-||ESSFIRESYSTEM|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|ESS Fire System - Sale! |,|MC-FIRE|,|479.99|,|419.45|,||,||,|0.000 |,||,||,||,|ESS Fire System
This is a Non-Toxic, odorless, environmentally safe fire suppression system, that is biodegradable and leaves no residue. It gives off no toxic fumes and is harmless to the skin and eyes. This is the perfect solution for the SpecMiata!
The system is offered in a 2.3 liter (roughly 5lbs), or 5.0 liter (10.5+ lbs) system, and is approved by SCCA, NASA, PCA, BMW Club, and others for competition and track days. This is a 3 nozzle (2 Zone) system utilizing a T-style nozzle design, a bulkhead tee fitting for two nozzle coverage of the engine compartment, all fittings, stainless steel mounting brackets, pull cable activation, our re-designed pull cable mounting bracket for easy installation, 10 ft. aluminum tubing, and detailed instructions
This system is a two zone system. It is designed to give protection to two zones in the event of a fire - most commonly the driver and the engine. In place of the engine the fuel cell could be the second zone.
Key Benefits
* Excellent coverage through the use of the new T-style nozzles
* Field rechargeable in under a half hour
* Easy to remove for technical inspection
* Not harmful to the driver or vehicle
Also talk a look at The Additional-Specs and Additional-information Tabs for more information *
|,|Options "2.3 L (5 lbs.)" "5.0 L (10.5+ lbs.) add(+$119.00)"|-||-|"Special Handing" "add(+$15)"|-||-|||-||EUNICEPARK9876|,||,|EUNICE PARK
VICE PRESIDENT Eunice@GoMiata.com|,||,||,||,||,||,||,||,||,||,||,|||-||GARAGE-STAR-MIATA-TOP-HATS|,|19MAMISUANDS|,|Extended Travel Rear Shock Mounts 1999-2005|,|61-1842|,|295.05|,|258.02|,||,||,|0.000 |,||,||,||,|Extended Travel Rear Shock Mounts 1999-2005
Improve ride quality by getting your rear suspension off the stops! These extended travel top hats add almost 1" of travel compared with an NB top. Adding more free shock travel before contact with the bumpstops significantly improves ride and handling. Uses a rubber bushing for a noise-free ride. Compatible with all of our bumpstop offerings.
Price is for TWO rear shock mounts, enough for one car.
With the suspension design of the NA and NB Miata, suspension travel is at a premium, and having enough travel is crucial to good handling and ride quality. As you lower the car, that travel is further reduced, so there is less and less room for the suspension to move before it slams the bumpstops. Folks often think high spring rates are to blame for harsh ride when they lower the Miata a lot with our Ground Control kits but lack of travel and slamming the bumpstops is the real issue. This is particularly a problem in the rear of the Miata and as a driver you are essentially sitting on the rear shock that is just inches behind your back.
The widely popular combos of running an adjustable sleeve and race spring to lower the car on shocks like the Konis, Bilsteins, KYB, etc. all suffer from almost no rear suspension travel on a lowered Miata, even with our short bumpstops.
The additional one inch of travel doesn't sound like much but when every millimeter helps, that is quite a lot.
Fitment Notes:
SHOCKS
Fits on most aftermarket shocks for the 1999-2005 Miata including Koni, KYB, Bilstein and Tokico.
These also fit the 1990-1997 Miatas but you MUST use the rear shocks for the 1999-2005 years to use these top hats in the back (due to length of the threaded shaft). So, if you are ordering four shocks for your 90-97 Miata at the same time, you need FRONT shocks for the 90-97 as usual, and REAR shocks for the 99-05 to be compatible with these rear upper mounts. If you are ordering a bumpstop kit to go with those shocks, get the bumpstop kit for 90-97 as the 90-97 kit includes the same bumpstops as the kits for 99-05 but also includes additional hardware that you'll need for the front 90-97 shocks.
YES these fit NA/NB Ohlins coilovers - add these to the Ohlins for the BEST riding setup possible!
These are NOT compatible with 949 Racing Xida coilovers.
SPRINGS
Fits factory springs, standard-diameter lowering springs, and 2.5" springs as used in the Ground Control coilover conversion kits.
Recommended for the rear ONLY. Using extended travel top hats in the front can allow the tire to contact the inner wheel well.
COLOR: Note the color has been updated. These are now anodized in black. No longer available in green.
|,|||-||ACCESSORIES-EXTERIOR-ACCESSORIES|,||,|EXTERIOR ACCESSORIES|,||,||,||,||,||,||,||,||,||,||,|||-||EXAC1|,||,|Exterior Accessories|,|newitem142549857|,||,||,||,||,||,||,||,||,||,|||-||ACCESSORIES-EXTERIOR-ACCESSORIES-1990-1997|,||,|EXTERIOR ACCESSORIES (1990-1997)|,||,||,||,||,||,||,||,||,||,||,|||-||ACCESSORIES-EXTERIOR-ACCESSORIES-1999-2005|,|ACCESSORIES-EXTERIOR-ACCESSORIES|,|EXTERIOR ACCESSORIES (1999-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||ACCESSORIES-EXTERIOR-ACCESSORIES-2006-2009|,|ACCESSORIES-EXTERIOR-ACCESSORIES|,|EXTERIOR ACCESSORIES (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||CREXTERIOR|,|SHOP-BY-TOP-MIATA-BRANDS|,|EXTERIOR MIATA|,||,||,||,||,||,||,||,||,||,|
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-EXTREME-DIMENSIONS|,|SHOP-BY-TOP-MIATA-BRANDS|,|Extreme Dimensions|,||,||,||,||,||,||,||,||,||,||,|||-||EZCARLIFT|,|SHOP-BY-TOP-MIATA-BRANDS|,|EZ Car Lift|,||,||,||,||,||,||,||,||,||,||,|||-||EZPOCARLIAC|,|MAPA191|,|EZcarlift™ Portable Car Lift Accessories|,|REK-50-100-CR|,|89.99|,|79.00|,||,||,|0.000 |,||,||,||,|EZcarlift™ Portable Car Lift Accessories
Ramp Extension Kit (REK) will extend the lift's ramps by 5 inches. This allows the lift to be used on vehicles with longer than 60" lifting points. If more length is needed a second set will ad additional 5 inches increasing the lift's range to 70 inches overall length. The Ramp Extension Kit has been very helpful when the lift Is used crosswise to lift the cat. The additional length will provide much better access to the driving mechanism of the lift making it easier to access with the corded drill.
The Ramp Extension Kit is not only ideal for the longer wheel base vehicles but also ideal for servicing ATVs, bikes with side cars, etc. etc. When using the REK for ATVs etc. make sure to purchase the optional Wheel Stops designed specifically for the Extension Kit.
|,|||-||FCOBLOCO|,|OWNERS-SHOWCASE|,|F.G. Cohen
Longmont, CO|,|101-109|,||,||,||,||,||,||,||,||,|Go Miata is the awesome,they are great to work with, responsive and provide exdellent customer service. I have a 2006 NC Copper Red MX5 with a few mods here and there (Eiback Sways, Mazdaspeed FSTB, Katzkins with Check Corp seat heaters) to name a few. I would highly recommend Go Miata to anyone who is looking for excellent Miata knowledge and customer service.
Sincerely,
F.G. Cohen
|,|||-||FACTORY-STYLE-FRONT-SPORT-PACKAGE-LIP-SPOILER-FOR-MAZDA-MX-5-MIATA1999-2000|,|NBBODYSTYLING|,|Factory Style Front Sport Package Lip Spoiler for Mazda MX-5 Miata 1999 - 2000 - Sale! |,|NB1-4620|,|329.00|,|244.02|,||,||,|5.000 |,||,||,||,|Factory Style Front Sport Package Lip Spoiler for Mazda MX-5 Miata 1999 - 2000
The New Factory Style Sport Package Lip spoiler is a similar design to the OEM factory spoiler lip that is not available anymore through Mazda.
This Factory Style Front Sport Package Lip Spoilers is made from OEM grade polyurethane for perfect fitment and installation. The spoiler lip is supplied painted in a mat black finish which can also be for installed as is or pained to match your Miata.
Easy installtion with all hardware supplied.
Great for Spec Miata!
|,|||-||909-265|,|NAFLOORING|,|Factory Style Sill Plates by IL Motorsport, Pair - w/Roadster Logo 1990-1997|,|909-265|,|185.25|,|159.02|,||,||,||,||,||,||,|Factory Style Sill Plates by IL Motorsport, Pair - w/Roadster Logo 1990-1997
Stainless steel sill plates with the Roadster logo are recreated to look exactly like the factory design that is no longer available from Mazda. Set of two, installation is easy with provided double-sided tape and screws.
|,|||-||FALKENTIRES|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Falken Tire|,||,||,||,||,||,||,||,||,||,||,|||-||FAZIZE|,|FALKENTIRES|,|Falken Ziex ZE-512|,|FALKEN-ZE-512-205-45-16|,|99.99|,|89.99|,||,||,|5.000 |,||,||,||,|Falken Ziex ZE-512
Falken's ZE-512 is a triple threat with excellent looks, performance and value. The high performance version, available in 60 and 65 Series, has a 40,000-mile limited tread wear warranty. The ultra high performance version is available in 30 through 55 series
Rated #1 by a leading consumer magazine.
|,|"Select Size" "205 / 45 R16"|-||-|"Shipping Cost" "add(+$29.99)"|-||-|||-||FIDANZA|,|SHOP-BY-TOP-MIATA-BRANDS|,|FIDANZA|,||,||,||,||,||,||,||,||,||,||,|||-||FIADCAMGE|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Fidanza Adjustable Cam Gear (1994-2000)|,|940184|,|256.68|,|179.95|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Compatible with 1994-2000 Miata Only
Prior to these little aluminum gears, cam timing changes meant hours of labor "keying" the fixed cam gear and guess work to change cam timing. Fast forward to the new age of technology.
The need for adjustable cam gears are many, namely a reliable, precise and affordable method of fine-tuning the action of the valves to complement the installation of performance add-ons (headers, cams, intakes) or specialty milling work on built engines.
Just as aftermarket engine management systems manage precise ignition timing, adjustable cam gears allow you to govern the action of the cam, which controls the timing action of the valves to shift peak power points or to tweak timing overlap within the engine cycle. "Overlap" is the point in the cam's cycle where the intake and exhaust valves are open simultaneously. Here's where critical tuning really optimizes performance because you are producing the most efficient charge of air/fuel in and out of the combustion chamber.
Fidanza Adjustable Cam Gears are made from the very highest quality 6061 T6 aluminum. They are CNC machined to more exacting tolerances than even original gears.
The outside ring is coal blasted before being hard anodized. The coal blasting gives the gear a textured surface for the belt to hold on to. The hard anodizing makes the outer ring incredibly durable.
To truly squeeze the most performance out of your Miata, these adjustable cam gears are a must.
Price is PER GEAR, adjust quantity in shopping cart to "2" to purchase a pair.
|,|"Select Color" "Silver" "Red" "Blue"|-||-|||-||161315|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|Fidanza High Performance Mazda Miata 2.0L Engine flywheel 2015+|,|161315|,|609.25|,|469.99|,||,||,|0.000 |,||,||,||,|Fidanza High Performance Mazda Miata 2.0L Engine flywheel 2015+
2015+ Mazda Miata
2.0 L Engine
Flywheel weight 8 lbs
Replaceable Friction plate 229101
|,|||-||891834|,|NBINVIALL|,|Fidanza High Performance Mazda Miata Short Throw Shifter 1990-2000 |,|891834|,|156.04|,|119.99|,||,||,|0.000 |,||,||,||,|Fidanza High Performance Mazda Miata Short Throw Shifter 1990-2000
1990-2000 Mazda Miata Short Throw Shifter.
Fits all Models 5 speed
Shifter Weight is 3 lbs.
|,|||-||FIHIPEMIALFL|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-1999-2005|,|Fidanza High Performance Miata Aluminum Flywheel (1990-1993)|,|FID-161161|,|595.00|,|407.95|,||,||,|0.000 |,||,||,||,| Fits the 1990-1993 Mazda Miata 1.6L 16V DOCH.
Aluminum flywheels have been used for many years for increasing performance. From the earliest days of racing and street build-ups, the world's best engine builders have been installing aluminum flywheels to give their engines the needed edge.
Not only will you see a dramatic increase in usable horsepower, but engine life can also be extended since there will be less stress on the crankshaft.
How Does A Fidanza Flywheel Give Me So Much Added Power?
To achieve the greatest increase in performance an aluminum flywheel must lower the moment of inertia characteristics of the engine. Put in simpler terms, we must reduce the amount of horsepower needed to turn the flywheel so that horsepower can be used to turn the wheels.
Your Miata will feel more powerful and accelerate faster with Fidanza!
Compare these Fidanza Aluminum Flywheel Features:
* Much lighter than factory steel flywheels
* Made from only the highest quality materials and CNC machined
* Any street or race engine will produce more torque
* Any street or race engine will last longer due to less stress on the engine internals
|,|||-||FIHIPEMIALFL1|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-1999-2005|,|Fidanza High Performance Miata Aluminum Flywheel (1994-2005)|,|FID-161181|,|589.81|,|429.99|,||,||,|0.000 |,||,||,||,| Fits the 1994-2005 Mazda Miata 1.8L 16V DOCH.
Aluminum flywheels have been used for many years for increasing performance. From the earliest days of racing and street build-ups, the world's best engine builders have been installing aluminum flywheels to give their engines the needed edge.
Not only will you see a dramatic increase in usable horsepower, but engine life can also be extended since there will be less stress on the crankshaft.
How Does A Fidanza Flywheel Give Me So Much Added Power?
To achieve the greatest increase in performance an aluminum flywheel must lower the moment of inertia characteristics of the engine. Put in simpler terms, we must reduce the amount of horsepower needed to turn the flywheel so that horsepower can be used to turn the wheels.
Your Miata will feel more powerful and accelerate faster with Fidanza!
Compare these Fidanza Aluminum Flywheel Features:
* Much lighter than factory steel flywheels
* Made from only the highest quality materials and CNC machined
* Any street or race engine will produce more torque
* Any street or race engine will last longer due to less stress on the engine internals
|,|||-||FIHIPEMIALFL2|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|Fidanza High Performance Miata Aluminum Flywheel 2006-2014|,|FID-161201|,|615.89|,|489.99|,||,||,|0.000 |,||,||,||,| Fits the 2006-2014 Mazda Miata 2.0L 16V DOCH.
Aluminum flywheels have been used for many years for increasing performance. From the earliest days of racing and street build-ups, the world's best engine builders have been installing aluminum flywheels to give their engines the needed edge.
Not only will you see a dramatic increase in usable horsepower, but engine life can also be extended since there will be less stress on the crankshaft.
How Does A Fidanza Flywheel Give Me So Much Added Power?
To achieve the greatest increase in performance an aluminum flywheel must lower the moment of inertia characteristics of the engine. Put in simpler terms, we must reduce the amount of horsepower needed to turn the flywheel so that horsepower can be used to turn the wheels.
Your Miata will feel more powerful and accelerate faster with Fidanza!
Compare these Fidanza Aluminum Flywheel Features:
* Much lighter than factory steel flywheels
* Made from only the highest quality materials and CNC machined
* Any street or race engine will produce more torque
* Any street or race engine will last longer due to less stress on the engine internals
|,|||-||FIMIHIPECLPO|,|FIDANZA|,|Fidanza Miata High Performace Clutch-Three Point Two|,|FID-361162|,|556.40|,|388.95|,||,||,|0.000 |,||,||,||,|The Fidanza Stage 3.2 Performance Clutch for the Mazda Miata is set up for use with Street Miatas that have significant modifications to them. The Fidanza Stage 3.2 Clutch Kit is designed with the enthusiast in mind and uses a Kevlar 4 Puck clutch disc to hold more power while resisting heat build up from the increased clamping force of the Sport Pressure Plate.
Fidanza uses a Sprung Hub Clutch Disc to reduce the chatter and vibration typically found in performance clutch kits. With the Kevlar 4 Puck Disc, the chances of glazing the clutch disc from overheating are reduced, making it suited for Daily Drivers as well as Competition Vehicles.
Fidanza recommends the Stage 3.2 Clutch for use with engines that have modifications such as Intake, Exhaust, ECU Tuning or Boost Controllers. Fidanza Clutch Kits are compatible with Aluminum, Steel or Chromoly Flywheels. For best performance, it is recommended to match a Fidanza Clutch with our Fidanza Lightweight Aluminum Flywheel.
Includes the Pressure Plate and Clutch Disc
Release Bearing, Pilot Bearing and Alignment Tool.
|,|"Select Year" "1990-1993 1.6L" "1994-2005 1.8L add(+$63.00)"|-||-|||-||FIMIHIPECLPO1|,|FIDANZA|,|Fidanza Miata High Performace Clutch-Two Point One|,|FID-361161|,|456.56|,|319.28|,||,||,|0.000 |,||,||,||,|The Fidanza Stage 2.1 Performance Mazda Miata Clutch is set up for use with Street Cars in either stock or slightly modified form. The Fidanza Stage 2.1 Clutch Kit is designed with the enthusiast in mind and use a Carbon Kevlar clutch disc to hold more power while resisting heat build up from the increased clamping force of the Sport Pressure Plate.
Fidanza uses a Sprung Hub Clutch Disc to reduce the chatter and vibration typically found in performance clutch kits. This makes the Stage 2.1 Clutch ideal for vehicles used as a Daily Driver.
Fidanza recommends the Stage 2.1 Clutch for use with engines that have modifications such as Intake and Exhaust System. Fidanza Clutch Kits are compatible with Aluminum, Steel or Chromoly Flywheels. For best performance, it is recommended to match this Fidanza Clutch with our Fidanza Lightweight Aluminum Flywheel.
Fidanza Clutch Kits include the Pressure Plate and Clutch Disc Release Bearing, Pilot Bearing and Alignment Tool.
|,|"Select Year" "1990-1993 1.6L" "DISCONTINUED 1994-2005 1.8L add(+$66.56)"|-||-|||-||FIMIHIPERACL1|,|FIDANZA|,|Fidanza Miata High Performace Race Clutch-Clutch-Four Point Three|,|FID-361163|,|465.92|,|349.44|,||,||,|0.000 |,||,||,||,|Fidanza Performance Mazda Miata Clutch kits are engineered to handle specific levels of modifications to your engine. With four different stages available, Fidanza makes it easy to find the perfect match to your engine.
The Fidanza Stage 4.3 Miata Race Clutch is set up for owners of Ultimate Street Miatas that build high horsepower using a significant level of modifications. The Fidanza Stage 4.3 Clutch Kit is specifically designed for High Horsepower Engines in mind and uses a Ceramic Clutch Disc to hold all the power you can build, without heat build up from the increased clamping force of the Race Pressure Plate.
Fidanza uses a Sprung Hub Clutch Disc to reduce some chatter and vibration typically found in race clutch kits. With the Ceramic 6 Puck Disc, the chances of overheating the clutch disc are drastically reduced, making it suited for Highly Modified Cars sometimes driven on the street as well as Competition Vehicles.
Lots of Horsepower on your car, Fidanza says Bring It! The Stage 4.3 Clutch is made to handle modifications such as High psi Turbo and Superchargers, Nitrous Oxide, or Tuned Engines running Race Gas. Fidanza Stage 4.3 Clutch Kits are compatible with Aluminum or Chromoly Flywheels, preferably with an SFI Certification.
For best performance, it is recommended to match a Fidanza Clutch with a Fidanza Lightweight Aluminum Flywheel.
Fidanza Clutch Kits include the Pressure Plate and Clutch Disc, Release Bearing, Pilot Bearing and Alignment Tool.
|,|"Select Year" "1990-1993 1.6L" "1994-2005 1.8L add(+$40.00)"|-||-|||-||FIMIHIPERACL|,|FIDANZA|,|Fidanza Miata High Performace Race Clutch-Five Point Four |,|FID-361164|,|657.28|,|455.95|,||,||,|0.000 |,||,||,||,|Fidanza 5.4 Performance Race Miata Clutch are built for either an all out race Miata or a rocket. This disc will show you what grip really feels like. As you can see there is no torsion damper, no marcel, and the pads are made from sintered iron. What you’ll feel – instantaneous power. This is for the racers.
|,|"Select Year" "1990-1993 1.6L" "1994-2005 1.8L add(+$30.00)"|-||-|||-||229001-18|,|19MAMIENPEVI|,|Fidanza Performance lightweight aluminum flywheels Friction Kit |,|229001-18|,|119.95|,|80.98|,||,||,||,||,||,||,|Fidanza Performance lightweight aluminum flywheels Friction Kit
PLEASE NOTE that Fidanza changed the design many years ago and we need to know by email HOW MANY CONNECTION BOLTS your example of this flywheel has to the friction ring. There are 18 and 20.
Easily replace your worn or damaged flywheel friction surface. These Fidanza replacement flywheel inserts make replacing your worn or damaged flywheel friction surface a breeze. These 1050 high carbon steel inserts are blanchard ground to ensure a perfect clutch disc mating surface. They are designed specifically for use with Fidanza flywheels. Includes bolts. Ships factory direct, allow a few days to process.
|,|||-||FIPEMICAGE|,|19MAMIENPEVI|,|Fidanza Performance Miata Camshaft Gear (1990-2003)|,|FID-940186|,|256.68|,|179.95|,||,||,|0.000 |,||,||,||,|Fits Both Intake and Exhaust Cams on 1990-1997 Mazda Miata Models. Fits Exhaust Cams Only on 1999-2003 When Stock ECU is Used.
This is the best camshaft gear on the market for your Mazda Miata MX-5. Fidanza adjustable cam gears are made from the highest quality 6061 T6 aluminum. They are CNC machined to more exacting tolerances than original gears.The tooth edges are beveled to increase belt life.
With twelve degrees (both advance and retard) of laser etched adjustments you can be assured of proper tuning. The inner ring is designed for strength, function, and precision.
Stainless steel studs are threaded through the backside of the outer gear. The inner gear is then fastened with stainless steel nuts and lockwashers. This enables an increase in the amount of torque used to tighten the fasteners, with no risk of stretching to the aluminum threads.
|,|"Select Color" "Red" "Blue" "Aluminum"|-||-|||-||FIEXDRYCHSOB1|,|19MAMIROBASA1|,|Fire Extinguisher - Dry Chemical Sodium Bicarbonate|,|HDG-FX25|,|109.99|,|94.95|,||,||,|0.000 |,||,||,||,|Fire Extinguisher - Dry Chemical Sodium Bicarbonate
For those always prepared for any situation, or for car enthusiast and competitive driving, a Fire Extinguisher makes a great addition to any vehicle. Extinguishers available in multiple sizes, with non-caustic dry chemical or residue free Halon and enviornmentally friendly Halotron extinguishing agents.
Chrome - 3" Diam x 14" Overall Length
* Non-caustic Sodium Bicarbonate powder
* BC Rated, electrical & flammable liquids
* Refillable
* Complete with mounting bracket
2.5 lb Chrome
|,|||-||FIEXHA1|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Fire Extinguisher - H3R Performance Maxout 2.5 lb Fire Extinguisher Chrome P/N MX250C - Sale! |,|HDG-FH25|,|379.99|,|249.95|,||,||,|0.000 |,||,||,||,|Fire Extinguisher - H3R Performance Maxout 2.5 lb Fire Extinguisher Chrome P/N MX250C
Description:
Fire Extinguisher; Maxout; Dry Chemical; Class ABC; 2B C Rated; 2.5 lb; Mounting Bracket; Steel; Chrome; Priced Each
* Fire Extinguisher; Maxout; Dry Chemical; Class ABC; 2B C Rated; 2.5 lb; Mounting Bracket; Steel; Chrome; Priced Each
* Fire Extinguisher
* Maxout
* Dry Chemical
* Class ABC
Dimensions: 4.1 x 6 x 17 inches
|,|||-||FIREPLATES|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Fire Plates|,|MC-FIREP|,|79.99|,|49.95|,||,||,|0.000 |,||,||,||,|Fire Plates
These aluminum plates are custom cut to cover the holes on the soft top mounting towers that lead into the trunk. They come with 4 pre-drilled holes for quick and easy mounting in the car.
Made from .060 aluminum these plates meet the SCCA requirement (see additional info) for sealing off the trunk area in case of fire.
|,|"Select Color" "Red" "Black"|-||-|||-||THAUDILIPLBR|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Flip Down License Plate Holder 1990-1997|,|904-885|,|89.99|,|49.98|,||,||,|0.000 |,||,||,||,|Flip Down License Plate Holder 1990-1997
No one wants to run a front license plate; it ruins the lines of the Miata. However, running into trouble by not having one sometimes doesn't seem worth it and we reluctantly give in to the law. The Flip Down license plate holder is the answer. It displays or retracts in one easy motion. When motoring, pull it out and flip it up; when you're at the car show, retract it for the clean look you admire. Now you can also choose a motorized version that operates with the push of a button from inside or outside your car. James Bond would approve!
|,|||-||THAUDILIPLBR1|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Flip Down License Plate Holder 2006-2008 & 2016-2018|,|904-885-1|,|69.99|,|49.98|,||,||,|0.000 |,||,||,||,|Flip Down License Plate Holder 2006-2008 & 2016-2018
No one wants to run a front license plate; it ruins the lines of the Miata. However, running into trouble by not having one sometimes doesn't seem worth it and we reluctantly give in to the law. The Flip Down license plate holder is the answer. It displays or retracts in one easy motion. When motoring, pull it out and flip it up; when you're at the car show, retract it for the clean look you admire. Now you can also choose a motorized version that operates with the push of a button from inside or outside your car. James Bond would approve!
|,|"Select Option" "Select Here" "Manual" "Automatic"|-||-|||-||FLPANGRTA|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Floor Pan Grip Tape|,|MC-GRIP|,|49.99|,|39.00|,||,||,|0.000 |,||,||,||,| Miata Floor Pan Grip Tape
Custom cut grip tape for your footwell floorboard. Prevents your shoes from slipping and sliding while you are driving, as well as getting in and getting out of the car. A must have if you ever see rain. This is not the basic grip tape you buy at the hardware store. This is the top of the line product that has an aluminum backing on it, so that it can be formed to fit in all the peaks and valleys of the stock floor board.
Custom cut 12" x 20" with rounded corners, it is a one piece design with a strong adhesive to make sure that it stays put.
Cheaper versions that don't have the conformable backing wont lay down into the valleys and will get air beneath them. Once there is an air pocket, it will allow liquid and debris to get beneath it and will start to loosen and peel. The cheaper versions also crack when you try to make them fit into and around the various floor pan caps and plugs.
No cutting, no measuring..... Just peel and stick.
|,|||-||FLDELACRINCA|,|OWNERS-SHOWCASE|,|Floyd de la Cruz
California|,|newitem87446642|,||,||,||,||,||,||,||,||,|Hello people, just wanted you to see her now! Thanks for all the goodies to get the JOB DONE!
Thanks,
Floyd de la Cruz
California
|,|||-||FOMU20CO|,|SHOP-BY-TOP-MIATA-BRANDS-COVERCRAFT|,|Ford Mustang 2011 Covercraft|,|C17124PG|,|512.82|,|317.95|,||,||,|0.000 |,||,||,||,|Ford Mustang 2011 Covercraft
|,|||-||FRMCBPA|,|OWNERS-SHOWCASE|,|Frank McKamey
Harrisburg, Pennsylvania|,|newitem109926603|,||,||,||,||,||,||,||,||,|This beautiful Garnet Red 2003 Miata found a new home on July 21st, 2007. Since then, I rarely have the top up (and that's pretty good for central Pennsylvania)!
Being new to the Miata scene has serioiusly made a great impact to my life. I plan on adding a Go-Miata TT Style Bar and windscreen and a few more chrome accessories. I have just ordered the Chrome Side Markers to go with the Rear Light Chrome Bezel I put on a few weeks ago. I also added a diamond grill cover and chrome fuel door cover. With the arrival of the Miata MX5 Performance Projects Book, I'm sure I will find even more to do! So far with my limited exposure to the Miata world, Go Miata is the BEST anywhere! Best Service, Best Prices, Best Follow up!
Frank McKamey
Harrisburg, Pennsylvania
|,|||-||FRSHCFORDE|,|DONTMISS|,|FREE SHIPPING SPECIALS|,||,||,||,|MAZDA MX-5 MIATA FREE SHIPPING PARTS AND ACCESSORIES|,||,||,||,||,||,|
|,|||-||FRSMBLPLWICH|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Small Black Plate With Chrome Teardrop|,|MAZ-2-CBM|,|45.99|,|37.95|,||,||,|0.000 |,||,||,||,|Raised Mazda Miata Chrome logo mounted on a black powder-coated metal plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship.
|,|||-||FRLABLPLWICH1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Large Black Plate With Chrome Mazda|,|D-MAZ-2-CB|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|Raised Mazda Miata Chrome logo mounted on a black powder-coated metal plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||FRLABLPLWICH2|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Large Black Plate With Chrome Miata MX-5 Logo|,|MIA-N-CB|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|Raised Miata MX-5 Chrome logo mounted on a black powder-coated metal plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||FRLASTPLWIBL|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Large Stainless Plate With Black Teardrop|,|AGI-MAZ2PC|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|Front Large Stainless Plate With Black Teardrop
Raised Mazda Miata Black Pearl logo mounted on a mirror polished stainless steel plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||FRLASTPLWIBL1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Large Stainless Plate With Black Teardrop|,|MAZ-2-B-CC|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|Raised Mazda Miata Chrome logo mounted on a mirror polished stainless steel plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||FRLABLPLWICH3|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Large Stainless Plate With Chrome Miata MX-5 Logo|,|MIA-N-CC|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|Front Large Stainless Plate With Chrome Miata MX-5 Logo
Raised Miata MX-5 Chrome logo mounted on a stainless powder-coated metal plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||FRLASTPLWIMA|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Large Stainless Plate With Mazda Logo|,|D-MAZ-2-CC|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|Front Large Stainless Plate With Mazda Logo
Raised Mazda Miata Black Pearl logo mounted on a mirror polished stainless steel plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship. Full-size 6” x 12”.
|,|||-||FRSELUPU|,|NBINSEDO|,|Front Seat Lumbar Pump |,|WTO-FSLP|,|79.99|,|59.00|,||,||,|0.000 |,||,||,||,|Front Seat Lumbar Pump
Back Pain?
Do you have discomfort or pain from driving. Do have back pain an don't know why?
Wet Okole Hawaii now sells lumbar supports for your front seats. They attach behind the seat cover with pre sewn-in velcro strips. They easily are adjusted for your height.
The lumbar support is easy to inflate, and adjust accordingly. All of our seat covers have pockets sewn in to accommodate the lumbar supports at any time. Simply tighten the stainless knob on the pump ball, and loosen to deflate. We even included a second hose clamp as a secondary locking feature to insure air doesn't leak from your support while it is filled with air. Numerous strength tests have been conducted, including the final stage in which we had Matt jump on the filled bladder (which held up), before he proceeded to trip forward and nearly land flat on his face. Matt is 230 pounds, and has recovered from his injuries.
* Price: Per Seat
Available as an option on all Mazda Miata MX-5 FRONT seat covers.
|,|||-||FRSMSTPLWICH|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Small Stainless Plate With Chrome Miata MX-5 Logo|,|MIA-N-CCM|,|45.99|,|37.95|,||,||,|0.000 |,||,||,||,|Front Small Stainless Plate With Chrome Miata MX-5 Logo
Raised Miata MX-5 Chrome logo mounted on a stainless powder-coated metal plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship.
|,|||-||FRSMSTPLWIBL|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Front Small Stainless Plate With Black Teardrop|,|MAZ-2-B-CCM|,|45.99|,|37.95|,||,||,|0.000 |,||,||,||,|Raised Mazda Miata Chrome logo mounted on a mirror polished stainless steel plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship.
|,|||-||FRTOWHOLIVE|,|19MAMISUANDS6|,|Front Tow Hook - Light Weight Version|,|MC-FTH|,|79.99|,|64.95|,||,||,|0.000 |,||,||,||,|Miata Front Tow Hook - Light Weight Version
This is our Light Weight Version of a front tow hook for 1990-2005 Miata's. The tow hook is designed for installation on the passenger side of the car and to allow the use of the stock tow hook for tying the car down in the trailer.
When we build cars, we try to minimize the amount of things we install on the drivers side of the car to help with overall balance and cross weights. While this tow hook does not weigh much (less than a pound) it is one less thing that gets installed on the drivers side of the car.
The big benefit of this tow hook is that it allows the use of the stock tow hook for tying the car down in the trailer. The stock tow hooks are on the proper angle and are made of very strong steel, but do not meet the 2" GCR requirement. With other aftermarket tow hooks, you have to remove the stock hook and then people either go without tying the car down on both sides in the front, or they end up bending the aftermarket tow hook. Our solution allows you to use both.
The main body is made from aluminum and the strap that is sewn to it is carbon kevlar.
A matching rear tow hook is currently under development and will be made available soon.
|,|||-||FUTEPOKIT|,|ENPE19|,|Fuel Test Port Kit|,|MC-FTPK|,|119.99|,|99.05|,||,||,|0.000 |,||,||,||,|Miata Fuel Test Port Kit
Kit comes complete with male,and female quick disconnect Aeroquip pieces, Brass barbed T coupler, 4 feet of rubber hose and 2 hose clamps. Easy to install and provides a safe leakproof solution for your SCCA fuel test port requirements. Aeroquip couplers are self sealing valves on both halves allowing connection and disconnection with minimal fluid loss.
We pump the fuel out of the car after every session to stay on top of how much fuel we use to keep the overall weight at the end of the race as close to the minimum as possible. This fuel sample port flows at a high rate, making the time required to drain the tank minimal.
This is not the cheap air conditioning style schraeder valves you see others offer. Why risk fire and low volume flow with cheap sub standard equipment?
1999-2005 model also available. For the 1999-2005 cars you must replace the stock plastic fuel line with a rubber line which is included in the kit.
|,|Select "1990-1997" "1999-2005"|-||-|||-||G-FORCE-RIVAL-S-1-5|,|BFTI|,|G-FORCE RIVAL S 1.5|,|g-force-rival-s-1-5|,|225.95|,|179.02|,||,||,|5.000 |,||,||,||,|G-FORCE RIVAL S 1.5
The g-Force Rival S 1.5 is BFGoodrich's Extreme Performance Summer tire developed for sports car, performance sedan and sports coupe driving enthusiasts who want their tires tuned to lower their run times in solo, autocross, time attack and hill climb events. The g-Force Rival S 1.5 is designed to raise the limits by delivering extreme grip that's extremely predictable, with improved handling response over its predecessor. However, like all Extreme Performance Summer tires, it is not intended to be serviced, stored nor driven in near- and below-freezing temperatures, through snow or on ice.
A further evolution of the BFGoodrich Rival S, the Rival S 1.5 features an updated construction process aimed at increasing the steering precision and transitional response often demanded by the drivers of smaller, lighter vehicles. The Rival S 1.5 features the same tread compound as its predecessor, which is designed to offer maximum dry and improved wet grip, as well as offer quicker warm-up in competition conditions, yet continues to earn a 200 Treadwear rating in Uniform Tire Quality Grade (UTQG) testing. This silica-infused compound is molded into an asymmetric, three-rib tread design. Large, solid outboard tread blocks and BFGoodrich's Extreme Tread Edge (ETE) shoulder design wraps the tread compound farther down the sidewalls for predictable feedback and maximum cornering grip from start to finish. Lateral groove draft angles promote consistent performance and wear, while chamfered block edges resist feathering under extreme cornering and braking.
The tire's internal structure features BFGoodrich's Performance Racing Core reinforced internal structure that reduces flex to increase steering response. The tread is stabilized by twin steel belts and an Equal TEnsion Containment System (ETEC System) of spirally wrapped nylon to optimize the tire's contact patch and traction at speed. g-Control sidewall inserts tune the sidewall stiffening to promote steering response.
Since the sidewall of the Rival S 1.5 is not branded with the "1.5" nomenclature, the easiest way to differentiate between the two versions of the g-Force Rival S is by using the speed rating branded on the sidewall. All Rival S tires feature a W-speed rating, while the Rival S 1.5 tires are V-speed rated. Additionally, the tires can be identified by the Sizing System. All Rival S tires are P-metric, so the tire size will always begin with a "P" (P245/40R18, for example). The Rival S 1.5 tires are all Euro-metric, so their tire size will start with a number (245/40R18).
Note: Tires exposed to temperatures of 20 degrees F (-7 degrees C) or lower must be permitted to gradually return to temperatures of at least 40 degrees F (5 degrees C) for at least 24 hours before they are flexed in any manner, such as by adjusting inflation pressures, mounting them on wheels, or using them to support, roll or drive a vehicle.
Flexing of the specialized rubber compounds used in Extreme Performance Summer tires during cold-weather use can result in irreversible compound cracking. While compound cracking is not a warrantable condition because it occurs as the result of improper use or storage, tires exhibiting compound cracking must be replaced.
|,|"Select Size" "Select Here" "205/50R15 86V" "225/45R15 87V add(+$18)" "245/40R15 88V add(+$49)"|-||-|"Shipping & Handing" "add(+$39)"|-||-|||-||GALIWA|,||,|GAHH: LIMITED WARRANTY|,||,||,||,||,||,||,||,||,||,||,|||-||GARAGE-VARY-CARBON-FIBER-COWL-COVER|,||,|Garage Vary Carbon Fiber Cowl Cover|,|garage-vary-carbon-fiber-cowl-cover|,|265.99|,|239.95|,||,||,|0.000 |,||,||,||,|Garage Vary Carbon Fiber Cowl Cover
Product from JAPAN made by Garage Vary from high quality and light CARBON FIBER. Keeps the cold air and does a nice look to the engine bay, useful for the persons using randall type intake.
|,|"Select Year" "NA6CE (90-93)" "NA8C (94-97)" "NB8C-1 (99-00)" "NB8C-2 (01-05)"|-||-|"EMS Shipping Cost" "add(+$55)|-||-|||-||GARAGE-VARY-CARBON-REAR-GARNISH|,||,|Garage Vary Carbon Rear Garnish ND5 (2015+)|,|garage-vary-carbon-rear-garnish|,|315.99|,|295.99|,||,||,|0.000 |,||,||,||,|Garage Vary Carbon Rear Garnish ND5 (2015+)
Rear Garnish for the 2015+ ND Miata made by Garage Vary out of Carbon Fiber. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. It's also a great way to hide tire sticking out of fender when running bigger or wider wheels/tires.
|,|"Shipping Cost" "add(+$19)"|-||-|||-||GARAGE-VARY-DIY-TAIL-LIGHTS|,||,|Garage Vary DIY Tail Lights|,|garage-vary-diy-tail-lights|,|610.99|,|595.99|,||,||,|0.000 |,||,||,||,|Garage Vary DIY Tail Lights
The GV Do-It-Yourself Nostalgic Tail Lights for NA (1989-1997) MX-5 are the solution to the now discontinued Mazda Porter Tail Lights (that came with the original Garage Vary Tail Lights Kit). It requires some wiring and assembly, but it’s nothing too difficult that a non-mechanic can do by itself. The kit keeps the same exterior look as the original kit, but requires some DIY work to install it.
|,|"Select Year" "Select Here" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Shipping Cost" "add(+$65)"|-||-|||-||GARAGE-VARY-FRONT-AIR-DEFLECTOR|,||,|Garage Vary Front Air Deflector|,|garage-vary-front-air-deflector|,|510.00|,|445.99|,||,||,|0.000 |,||,||,||,|Garage Vary Front Air Deflector
Product made by Garage Vary. Covers a part where usually tires stick out because of low offset wheels. It will also make the car more stable at high speed.
Please note that it will only work with a Garage Vary Front Lip.
|,|"Select Year" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Shipping Cost" "add(+$65)"|-||-|||-||GARAGE-VARY-FRONT-BUMPER-GRILLE|,||,|Garage Vary Front Bumper Grille NC (06-08)|,|garage-vary-front-bumper-grille|,|425.00|,|382.02|,||,||,|0.000 |,||,||,||,|Garage Vary Front Bumper Grille NC (06-08)
Product from JAPAN made by Garage Vary. Changes the front end of the vehicle. Makes the bumper look more aggressive.
|,|"Shipping Cost" "add(+$75)"|-||-|||-||GARAGE-VARY-FRONT-CANARDS|,||,|Garage Vary Front Canards|,|garage-vary-front-canards|,|215.99|,|171.99|,||,||,|0.000 |,||,||,||,|Garage Vary Front Canards
Product made by Garage Vary. Garage Vary's front canards flows well with the OEM bumper, giving downforce and aggressive look. Looks great with flares and/or sideskirts. Before painting, please make sure the product fits the car properly.
|,|"Select Year" "Select Here" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)"|-||-|"Finish" "Select Here" "Carbon Fiber (+$100)" "FRP"|-||-|"Size" "Select Here" "Extra large (only available for NA) +$35.00" "Regular"|-||-|"Shipping Cost" "add(+$22)"|-||-|||-||GARAGE-VARY-FRONT-GARNISH|,||,|Garage Vary Front Garnish|,|garage-vary-front-garnish|,|226.00|,|195.99|,||,||,|0.000 |,||,||,||,|Garage Vary Front Garnish
Product made by Garage Vary. Garage Vary's front garnish flows well with the OEM front lip, helps hide low offset wheels/tires. Before painting, please make sure the product fits the car properly.
|,|"Select Year" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Shipping Cost" "add(+$21)"|-||-|||-||GARAGE-VARY-HEADLIGHT-AIR-INTAKE-COVER|,||,|Garage Vary Headlight Air Intake Cover 2001-2005|,|garage-vary-headlight-air-intake-cover|,|225.99|,|171.99|,||,||,|0.000 |,||,||,||,|Garage Vary Headlight Air Intake Cover 2001-2005
Product made by Garage Vary to help engine cooling. Before painting, please make sure the product fits the car properly.
|,|"Headlight Side" "Select Here" "Driver side" "Passenger side +$75.00"|-||-|"Shipping Cost" "add(+$39)"|-||-|||-||GARAGE-VARY-HEADLIGHT-AIR-INTAKE-LID|,||,|Garage Vary Headlight Air Intake Lid|,|garage-vary-headlight-air-intake-lid|,|255.99|,|225.99|,||,||,|0.000 |,||,||,||,|Garage Vary Headlight Air Intake Lid
Product made by Garage Vary to help engine cooling. Before painting, please make sure the product fits the car properly.
|,|"Select Year" "NA6CE (90-93)" "NA8C (94-97)"|-||-|"Headlight side" "Driver Side"|-||-|"Shipping Cost" "add(+$32)"|-||-|||-||GARAGE-VARY-MAZDA-MIATA-MX-5-TRUNK-SPOILER-NC-2006-2012|,|20MIMIEXPA|,|Garage Vary Low Trunk Lip Spoiler NC 2006-2015|,|NC1-4075|,|349.95|,|229.95|,||,||,|0.000 |,||,||,||,|Garage Vary Low Trunk Lip Spoiler NC 2006-2015
• Looks great
• Perfect fit
• Lightweight
• Made of Urethane
• ONLY available for NCEC-1 Miata (2006-2008), NCEC-2 (2009-2012) and NCEC-3 (2013-2015) without PRHT
|,|"Select Year" "Select Here" "NCEC-1 (06-08)" "NCEC-2 (09-12)" " NCEC-3 (13-15)"|-||-|||-||MIGAVA19EY|,|NBACCESSORIES|,|Garage Vary Mazda Miata Eyelid 1999-2005|,|GARAGE-VARY-EYE-LIDS|,|279.99|,|219.99|,||,||,|0.000 |,||,||,||,|Garage Vary Mazda Miata Eyelid 1999-2005
Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the headlight look more aggressive. Before painting, please make sure the product fits the car properly.
Product Description:
• Perfect fit
• Flows really well with the lines of the car
• Stylish and durable
• Gives a more aggressive look to the NB
• PRICE IS FOR THE PAIR
• Available in FRP
• Only available for NB Miata (1998-2005)
|,|"Select Year" "Click Here to Select Year" "1999-2000" "2001-2005"|-||-|||-||MIFRAELIPSP2|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Garage Vary Mazda Miata Front Aero Lip Spoiler 2001-2005|,|GV-FRONT-LIP-2001-2005|,|399.99|,|299.99|,||,||,|5.000 |,||,||,||,|Garage Vary Mazda Miata Front Aero Lip Spoiler 2001-2005
From Japan - New 2001-2005 Frontal Aero Lip Spoiler.
This spoiler can be painted any body color to match but are equally attractive in their natural and durable Urethane finish.
The Miata Front Aero Lip Spoiler Body parts have perfect fit and mount perfectly.
|,|||-||MIFRLIPSPUR1|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Garage Vary Mazda Miata Front Lip Spoiler Urethane 1999-2000|,|GV-FRONT-LIP-1999-2000|,|399.99|,|299.99|,||,||,|5.000 |,||,||,||,|Garage Vary Mazda Miata Front Lip Spoiler Urethane 1999-2000
This Front Lip Spoiler for the Miata is constructed in Japan by renown designer Garage Vary is made of tough, durable urethane for long lasting good looks; corrosion-resistant hardware and instruction are included for a ease of installation. Don't be fooled by imitators, this is the real deal! Supplied unpainted in a natural black finish.
This spoiler can be painted any body color to match but are equally attractive in their natural and durable Urethane finish. This Mazda Miata Front Lip Spoiler Urethane from Japan have perfect fit and finish and mount perfectly.
|,|||-||GARAGE-VARY-RACING-GT-WING|,||,|Garage Vary Racing GT Wing|,|garage-vary-racing-gt-wing|,|775.99|,|645.99|,||,||,|0.000 |,||,||,||,|Garage Vary Racing GT Wing
• Improves aerodynamics
• FRP top with Carbon Fiber end-plates
• Makes the vehicle look more aggressive
• Only available for NC MX5s (2006-2014)
|,|"Select Year" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-14)"|-||-|"Top Version" "PRHT" "Soft Top"|-||-|"Shipping Cost" "add(+$195)"|-||-|||-||GARAGE-VARY-RADIATOR-COOLING-PANEL|,||,|Garage Vary Radiator Cooling Panel|,|garage-vary-radiator-cooling-panel|,|255.99|,|165.99|,||,||,|0.000 |,||,||,||,| Garage Vary Radiator Cooling Panel
Product from JAPAN made from high quality and light CARBON FIBER. Keeps the cold air at the radiator instead of letting it escape over the top.
Black Carbon Fiber Finish.
|,|"Select Year" "NA6CE (90-93)" "NA8C (94-97)" "NB8C-1 (99-00) +$115.00" "NB8C-2 (01-05) +$115.00"|-||-|"Shipping cost" "add (+$24)|-||-|||-||GARAGE-VARY-SIDE-AIR-DEFLECTOR|,||,|Garage Vary Side Air Deflector|,|garage-vary-side-air-deflector|,|399.99|,|345.99|,||,||,|0.000 |,||,||,||,|Garage Vary Side Air Deflector
Product made by Garage Vary. Covers a part where usually tires stick out because of low offset wheels. It will also make the car more aerodynamic. Before painting, please make sure the product fits the car properly.
|,|"Select Year" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||GAVAURFRLIPS|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Garage Vary Urethane Front Lip Spoiler Mazda Miata NA 1990-1997|,|GV-Front-Lip-1990-1997|,|349.99|,|299.99|,||,||,|5.000 |,||,||,||,|Garage Vary Urethane Front Lip Spoiler Mazda Miata NA 1990-1997
Now this is really cool product. As tuff as they are good looking, these functional spoilers install easily. Your Miata will gain a totally distinctive New look that is more aggressive, yet subtle with just a hint of RX-7.
All Garage Vary Body parts have perfect fit and mount perfectly; made in Japan with the most stringent quality controls.
Quantities are limited so order today!
|,|"Select Year" "Click Here" "1990-1993" "1994-1997"|-||-|"Drop-Shipping Fee" "add(+$29.95)"|-||-|||-||GAYCRTX|,|OWNERS-SHOWCASE|,|Gay Crocker
Austin, TX|,|gaycrtx|,||,||,||,||,||,||,|afaf|,||,|I just bought this great little car on Ebay! Had to drive to Miami and
back to Austin but it was worth it! I just got new headrest speakers and
a new hard top cart from GoMiata, and am really enjoying them. I plan to
upgrade the radio and add XM radio to it soon. I also want the hard boot
cover but it won't fit with the current roll bar without modifications.
All in all, its drives better than my old MG -B and is a lot more
reliable. My kids named her Racine!
Gay Crocker
Austin, TX
|,|||-||GEEXUHP|,||,|General Exclaim UHP |,|GEN-EXCLAIMUHP|,|79.00|,|69.00|,||,||,|0.000 |,||,||,||,|The Exclaim UHP is General Tire's Ultra High Performance Summer tire that was developed for the drivers of sports cars, coupes and sedans. While meeting minimum tread design standards to be "M+S" branded, the Exclaim UHP is designed to provide high levels of traction, response and control in dry conditions, along with superior hydroplaning resistance in wet conditions. We do not suggest Exclaim UHP tires be driven in near-freezing temperatures, through snow or on ice.
The Exclaim UHP uses a 2nd generation, ultra high performance silica compound molded into a directional tread design that features wide, solid shoulder tread blocks and a high-tech contour to combine responsive handling with dry traction. Its Double-V directional tread pattern enhances wet performance. Together, the tread compound and design help sweep water away from between the tire’s contact patch and the road to improve wet grip while reducing the possibility of hydroplaning. The tire’s internal structure includes twin steel belts reinforced by spirally wound jointless nylon on top of polyester body plies to combine responsive handling and cornering stability with high-speed durability.
|,|"Please Select Size" "205/50-15" "205/45-16 add(+$7.00)" "205/40-17 add(+$23.00)"|-||-|||-||NC11-69-180G-XX|,|NBBODYSTYLING|,|Geninue Mazda Miata OEM Driver's Side Outside Power Mirror 1999-2005|,|NC11-69-180G-XX|,|286.63|,|229.99|,||,||,||,||,||,||,|Geninue Mazda Miata OEM Driver's Side Outside Power Mirror 1999-2005
|,|"Select Color" "Select Here" "Green" "Black" "Red" "White" "Supreme Blue"|-||-|||-||NC11-69-120G-XX|,|NBBODYSTYLING|,|Geninue Mazda Miata OEM Passenger's Side Outside Power Mirror 1999-2005|,|NC11-69-120G-XX|,|286.63|,|229.99|,||,||,||,||,||,||,|Geninue Mazda Miata OEM Passenger's Side Outside Power Mirror 1999-2005
|,|"Select Color" "Select Here" "Green" "Black" "Red" "White" "Supreme Blue"|-||-|||-||GENIUNE-MAZDA-MIATA-OEM-PCV-VALVE--1999-2000-|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Geniune Mazda Miata OEM PCV Valve 1999-2000|,|B541-13-890A|,|32.50|,|25.02|,||,||,|0.000 |,||,||,||,|Geniune Mazda Miata OEM PCV Valve 1999-2000
Geniune Mazda Miata PCV Valve (1999-2000). Check every 30,000 miles.
|,|"Select Year" "1999-2000"|-||-|||-||GENUINEMAZDA1|,|SHOP-BY-TOP-MIATA-BRANDS|,|GENUINE MAZDA|,||,||,||,|GENUINE MAZDA OEM MX-5 MIATA PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||GENUINE-MAZDA-BRUSHED-LICENSE-PLATE|,|MIGIMOVIALL|,|Genuine Mazda Brushed License Plate|,|0000-83-Z32|,|74.95|,|60.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Brushed License Plate
Genuine Mazda Brushed License Plate.These high quality stainless steel License Plate Frames are now available with highly detailed laser etched graphics. Universal fit and easy mounting application include complementing hardware hider caps to complete the look of the vehicle. Select Frames are available in brushed finish.
|,|||-||GENUINE-MAZDA-CHROME-LUGNUT-EACH|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Chrome Lugnut (Each) 1990-2018|,|B002-37-160B|,|10.99|,|8.15|,||,||,|0.000 |,||,||,||,|Genuine Mazda Chrome Lugnut (Each) 1990-2018
Genuine Mazda Chrome Lugnut (Each).Lost or just need new lugnuts? Replace them with new genuine Mazda factory parts and accessories.
|,|||-||GENUINE-MAZDA-FIRST-AID-KIT-AND-ROADSIDE-ASSISTANCE-KIT|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda First Aid Kit and Roadside Assistance Kit|,|0000-8D-Z03-C9N1-W3-580|,|169.05|,|138.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda First Aid Kit and Roadside Assistance Kit
Genuine Mazda Roadside Assistance Kit.This kit includes a folding reflective triangle, flashligh with batteries, dial tire pressure gauge, emergency blanket, rain poncho, cotton gloves, shop towel, and multi-function tool. Contained in a convenient zippered, nylon bag. Genuine Mazda First Aid Kit includes four types of bandages a total of 30, two types gauze pads a total of four, adhesive tape, six antiseptic towelettes, three sting relief pads, three moistened towelettes, two iodine prep pads, two triple antibiotic ointments, one first aid burn gel, two pairs of vinyl gloves, one five by seven instant cold pack,scissors,metal tweezers,first aid manual,three poly bags. Contained in a zippered, nylon bag..
|,|||-||MAMIFRSPDA1|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda MAZDASPEED Miata OEM Front Sport Damper 1999-2005|,|907-225|,|199.99|,|159.95|,||,||,|5.000 |,||,||,||,|Genuine MAZDASPEED OEM Sport Dampers have incresed damping rate.
2 Required.
Available Years: 1999-2005
Price is per shock.
Please update quantity in your shopping cart to 2 for a complete set.
|,|||-||MAMIRESPDA1|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda MAZDASPEED Miata OEM Rear Sport Damper 1999-2005|,|907-230|,|199.99|,|159.95|,||,||,|5.000 |,||,||,||,|Genuine MAZDASPEED OEM Sport Dampers have incresed damping rate.
2 Required.
Available Years: 1999-2005
Price is per shock.
Please update quantity in your shopping cart to 2 for a complete set.
|,|||-||MAMICOOVSU|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Coil Over Superension 2006-2008|,|907-910|,|1,999.99|,|1,799.95|,||,||,|5.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Coil Over Superension.
Ride Height adjustable between 20mm and 50mm lower than stock.
Spring rate increases of 80% over stock depending on vehicle model.
Dampers single knob adjustment for rebound and compression.
Available Years: 2006-2008
|,|"Shipping Cost" "add(+$95)"|-||-|||-||GEMACOAIRINM|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Cold Air Intake 2006-2009|,|909-123|,|589.95|,|442.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Cold Air Intake 2006-2009
Bring cold air from outside the engine compartment into the engine through mandrel bent 2.5" diameter, polished and powder coated aluminum tubing. The intake system is designed for improved engine breathing, while re-using the stock MAF sensor. The kit utilizes the latest in dry filter technology. The kit is emission-legal in all 50 states.
|,|||-||GEMAMIDOSWPA|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Door Switch Panel 2006-2008|,|909-173|,|158.00|,|132.00|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Door Switch Panel for year 2006-2008
Add a technical look with carbon fiber to the Door Switch Panels.
|,|"Select Options" "Without Power Door Locks" "With Power Door Locks"|-||-|||-||20MASPMIPAFR|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Front Bumper 2006-2009|,|910-100|,|1,699.99|,|1,499.95|,||,||,|200.000 |,||,||,||,|Mazda Speed MX-5 Miata OEM Front Bumper. Aggressive design with larger air openings.
Includes Fog Lamp Mounting Kit at no additional charge!
Color: Primered
|,|"Shipping Surcharge" "Pacific States add(+$59.00)" "Central States add(+$79.00)" "Atlantic States add(+$99.00)"|-||-|||-||GEMAMIFRSPDA|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Front Sport Damper 2006-2008|,|907-226|,|249.99|,|164.95|,||,||,|5.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Front Sport Damper 2006-2008
Sport Dampers have increase damping profiles for a sportier ride and handling.
QNCA34700
Sold as each.
Change Qty. 2 if you need the Pair.
|,|||-||GEMAMIINDEPA|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Instrument Decoration Panel 2006-2008|,|909-751|,|195.00|,|176.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Instrument Decoration Panel 2006-2008
NO LONGER AVAILABLE
MazdaSpeed Miata Instrument Decoration Panel. Adds a technical carbon fiber look to the instrument panel.
|,|||-||MASPMXMIKNPA|,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Knee Pad Set|,|907-860|,|399.99|,|306.00|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Knee Pad Set (One for Driver Side and One for Passager Side). Door panel and transmission tunnel pads provide a sporty addition to the interior.
Available Years: 2006-2009
|,|||-||GEMAKNPADSET|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Knee Pad Set 2006 - 2009|,|909-419|,|689.99|,|529.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Knee Pad Set (One for Driver Side and One for Passager Side).
Door panel and transmission tunnel pads provide a sporty addition to the interior.
Available Years: 2006, 2007, and 2008
|,|||-||GEMAMIPABRLE|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Parking Brake Lever Grip 2006-2008|,|909-549|,|225.00|,|199.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Parking Brake Lever Grip for year 2006-2008
Add a technical look with an aluminum and carbon fiber Parking Brake Lever Grip.
*Only parking brake grip included, and not shift knob.
|,|||-||GEMAMIPEPA|,|NBINAC1|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Pedal Pads 1999-2005|,|OEM-0000-8R-D11|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Pedal Pads, Mazdaspeed. Comes with accelerator, clutch, brake and footrest pedal pads.
For Mazda MAZDASPEED MX-5 Years: 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|||-||GEMAMIRELIPS|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Rear Lip Spoiler 2006-2008|,|909-843|,|579.99|,|499.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Rear Lip Spoiler 2006-2008 (Soft Top Only).
3 piece body-color painted Lip Spoiler. At check-out, leave VIN for color match.
|,|||-||GEMAMIRESPDA|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Rear Sport Damper 2006-2008|,|907-227|,|139.99|,|105.05|,||,||,|5.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Rear Sport Damper 2006-2008
Sport Dampers have increase damping profiles for a sportier ride and handling.
QNCA28700
Sold as each.
Change Qty. 2 if you need the Pair.
|,|||-||GEMAMISHGAPA|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Shift Gate Panel 2006-2008|,|909-543|,|159.99|,|124.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Shift Gate Panel 2006-2008
NO LONGER AVAILABLE
Add a technical look with carbon fiber to the automatic transmission Shift Gate Panel.
*Steel finish shown in photo. Actual Panel is carbon fiber.
|,|||-||GEMAMISHKN2|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Shift Knob 2006-2008|,|909-234|,|189.99|,|149.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Shift Knob 2006-2008
Add a technical look with an aluminum and carbon fiber Shift Knob.
|,|"Select Transmission" "Manual" "Automatic"|-||-|||-||GEMAMAMXMIOE|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Side Skirts 2006-2008|,|OEM-QNCA-70-900-xx|,|1,078.99|,|1,028.99|,||,||,|10.000 |,||,||,||,|Aggressive designed Side Skirts to accent the Front Bumper Face and Rear Bumper designs. Body color painted with Dark Gray Metallic lower accent.
*ONLY Highland Green Mica Available*
|,|"Shipping & Handing" "add(+$119)"|-||-|||-||GEMAMAMXMIOE1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Sway Bar Kit 1999-2005|,|OEM-GRMS-8M-D03|,|479.99|,|375.99|,||,||,|3.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Sway Bar Kit 1999-2005
Stabilizer Bar Kit provides increased steering response and reduced body roll.
Kit includes frant and rear Stabilizer Bars and urethane bushings.
Due to the size of this item, additional shipping charges will be reflected in your total.
|,|||-||MAMISWBARKIT|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Sway Bar Kit 2006-2008|,|OEM-GRMS-8M-D16|,|479.99|,|375.99|,||,||,|3.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Sway Bar Kit 2006-2008
Stabilizer Bar Kit provides increased steering response and reduced body roll.
Kit includes frant and rear Stabilizer Bars and urethane bushings.
Due to the size of this item, additional shipping charges will be reflected in your total.
|,|||-||GEMASPBRPAMX|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda MAZDASPEED OEM Front Sport Brake Pads - MX-5 Miata 2003 - 2005|,|902-431|,|203.00|,|158.40|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED OEM Front Sport Brake Pads - MX-5 Miata (2003 - 2005) MX-5 MIATA and MAZDASPEED MX-5 MIATA
NO LONGER AVAILABLE
Improved pad material for improved high temp performance. Price for each.
|,|||-||GEMARESPBRPA|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda MAZDASPEED OEM Rear Sport Brake Pads - MX-5 Miata (2003 - 2005)|,|902-432|,|190.00|,|148.80|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED OEM Rear MX-5 MIATA and MAZDASPEED MX-5 MIATA (2003-2005)
Improved pad material for improved high temp performance. Price for each.
|,|||-||GENUINE-MAZDA-MIATA-90-97-DRIVER-SIDE-TAILLIGHT-LENS-HOUSING|,|NAEXLI|,|Genuine Mazda Miata 90-97 Driver Side Taillight Lens & Housing|,|NA01-51-180B|,|213.13|,|182.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata 90-97 Driver Side Taillight Lens & Housing
Genuine Mazda Miata 90-97 Driver Side Taillight Lens & Housing broken? Cracked? Faded? Replace with this factory part
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-90-97-PASSENGER-TAILLIGHT-LENS-HOUSING|,|NAEXLI|,|Genuine Mazda Miata 90-97 Passenger Taillight Lens & Housing|,|NA01-51-170B|,|213.13|,|182.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata 90-97 Passenger Taillight Lens & Housing
Genuine Mazda Miata 90-97 Passenger Tail light Lens & Housing cracked? Faded? Busted? Replace with this Mazda Miata factory part. Does not include bulbs, gaskets, or sockets.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-94-00-VALVE-COVER-GASKET|,|19MAMIMAVEAL|,|Genuine Mazda Miata 94-00 Valve cover gasket|,|BP05-10-235C|,|62.64|,|54.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata 94-00 Valve cover gasket
Genuine Mazda Miata 94-00 Valve cover gasket. Replace your valve cover gasket with this Mazda Miata factory part.
|,|"Year" "1994" "1995" "1996" "1997" "1999" "2000"|-||-|||-||GENUINE-MAZDA-MIATA-ALIGNMENT-BOLT-SET-1-EACH|,|19MAMIMAVEAL|,|Genuine Mazda Miata Alignment Bolt Set (1)Each|,|NAY9-28-6AZ|,|26.02|,|21.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Alignment Bolt Set(1)Each
Genuine Mazda Miata Alignment Bolt Set(1)Each. These are for front or rear. There are 4 on front and 4 on the rear.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-BACK-UP-LAMP-SWITCH|,|19MAMIMAVEAL|,|Genuine Mazda Miata Back Up Lamp Switch 1991-1997|,|M506-17-640A|,|50.08|,|42.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Back Up Lamp Switch
Miata Back Up Lamp Switch on the Transmission.
|,|"Year" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-COOLANT-CAP|,|19MAMIMAVEAL|,|Genuine Mazda Miata Coolant Cap|,|FEA7-13-104|,|7.33|,|6.23|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Coolant Cap
Mazda Miata Coolant Cap. 1.6 Cap on the rear of the Cylinder head.
|,|"Year" "1990" "1991" "1992" "1993"|-||-|||-||GENUINE-MAZDA-MIATA-DRIVER-S-SIDE-WIPER-ARM|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata Driver's Side Wiper Arm|,|NA01-67-321-LA01-67-395C|,|133.29|,|103.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Driver's Side Wiper Arm
Genuine Mazda Miata Driver's Side Wiper Arm rusty and look bad?. Replace your wiper with this factory part.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-FOG-LAMP-SWITCH|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata Fog Lamp Switch 1990-1997|,|BW0G-66-4B0|,|137.04|,|119.75|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Fog Lamp Switch
Genuine Mazda Miata Fog Lamp Switch. 1990 and 1991 models are the only year models already wired for this switch.
|,|"Year" "Select Here" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-HEATER-HOSE-KIT-1-6|,|19MAMIMAVEAL|,|Genuine Mazda Miata Heater Hose Kit 1.6|,|61211-61212-16|,|36.87|,|33.05|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Heater Hose Kit 1.6
Mazda Miata Heater hoses leaking getting old replace them. Check all the hoses.Need last 8 of your Vin at checkout
|,|"Year" "1990" "1991" "1992" "1993"|-||-|||-||GENUINE-MAZDA-MIATA-HEATER-HOSE-KIT-1-8|,|19MAMIMAVEAL|,|Genuine Mazda Miata Heater Hose Kit 1.8|,|61211-61212-18|,|50.50|,|41.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Heater Hose Kit 1.8
Mazda Miata Heater hoses leaking getting old replace them. Check all the hoses.Need lat 8 of your Vin at checkout.
|,|"Year" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-HOSE-CLAMP|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata Hose Clamp|,|992831200|,|2.99|,|2.43|,||,||,||,||,||,||,|Genuine Mazda Miata Hose Clamp
|,|||-||GENUINE-MAZDA-MIATA-INTERIOR-LAMP|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata Interior Lamp |,|NA01-51-490B-00|,|54.09|,|48.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Interior Lamp
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995"|-||-|||-||9965-D7-6560|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|Genuine Mazda Miata MX-5 OEM Alloy Wheel 16 X 6.5 2006-2015|,|9965-D7-6560|,|414.95|,|352.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Alloy Wheel 16 X 6.5
Description: 16 X 6.5.
SKU:
2006-2008: 9965-60-6560
2009-2012: 9965-D6-6560
2013-2015: 9965-D7-6560
Manufacturer: Genuine Mazda Original Parts
|,|"Select Year" "Select Here" "2006-2008 add(+$220)" "2009-2012 add(+$240)" "2013-2015"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||9965-G3-6560|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|Genuine Mazda Miata MX-5 OEM Alloy Wheel 16X6.5|,|9965-G3-6560|,|353.24|,|298.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Alloy Wheel 16X6.5
Manufacturer: Genuine Mazda Original Parts
|,|"Shipping & Handling" "add(+$49)"|-||-|||-||BPS5-20-55X|,|19MAMIEXCACO1|,|Genuine Mazda Miata MX-5 OEM Base, LS, Mazdaspeed Without Turbo Catalytic Converter 2001-2005|,|BPS5-20-55X|,|1,084.95|,|894.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Base, LS, Mazdaspeed Catalytic Converter 2001-2005
Base, LS, Mazdaspeed
|,|"Freight Cost" "add(+$95)"|-||-|||-||NA6W-37-190|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|Genuine Mazda Miata MX-5 OEM BBS Center Cap 2016-2018+|,|NA6W-37-190|,|79.95|,|64.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM BBS Center Cap 2016-2018+
Manufacturer: Genuine Mazda Original Parts
|,|||-||9965-68-7070|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|Genuine Mazda Miata MX-5 OEM Chrome Alloy Wheel 17 X 7 2006-2015|,|9965-68-7070|,|374.17|,|302.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Chrome Alloy Wheel 17 X 7
Description: 17 X 7, CHROME
SKU:
2006-2007: 9965-36-7070
2008-2009: 9965-40-7070
2010-2015: 9965-68-7070
Manufacturer: Genuine Mazda Original Parts
|,|"Select Year" "Select Here" "2006-2007 add(+$305)" "2008-2009 add(+$270)" "2010-2015"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||WHEELS-PART|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|Genuine Mazda Miata MX-5 OEM Dark Silver Alloy Wheel 17 X 7|,|9965-A0-7070|,|658.35|,|522.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Dark Silver Alloy Wheel 17 X 7
Description: 17 X 7, Dark Silver.
Manufacturer: Genuine Mazda Original Parts
|,|"Shipping & Handling" "add(+$49)"|-||-|||-||NA01-60-960|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata MX-5 OEM Fuel Gauge Sending Unit 1990-1993|,|NA01-60-960|,|110.46|,|93.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Fuel Gauge Sending Unit 1990-1993
Fuel Sender Unit, Guage Fuel
|,|||-||9965-85-7070|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|Genuine Mazda Miata MX-5 OEM Gun Metallic Alloy Wheel 17 X 7|,|9965-85-7070|,|343.24|,|298.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Gun Metallic Alloy Wheel 17 X 7
Description: 17 X 7, Gun Metallic.
Manufacturer: Genuine Mazda Original Parts
|,|"Shipping & Handling" "add(+$49)"|-||-|||-||LD47-37-770|,|MAZDA-MX-5-MIATA-OEM-WHEEL-ACCESSORIES-2006-2015|,|Genuine Mazda Miata MX-5 OEM Lifting Lever Jack Handle 2006-2015|,|LD47-37-770|,|14.95|,|10.98|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Lifting Lever Jack Handle 2006-2015
|,|||-||N243-32-280|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata MX-5 OEM Outer Tie Rod 2016-2019+|,|N243-32-280|,|38.10|,|31.04|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Outer Tie Rod 2016-2019+
Positions: Left, Right
Other Names: Joint Ball
#11 in Illustration
|,|||-||PE01-13-890|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata MX-5 OEM PCV Valve 2016+|,|PE01-13-890|,|15.95|,|13.44|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM PCV Valve 2016+
#5 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|||-||N2Y3-26-48ZA|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata MX-5 OEM Rear Brake Pads 2016+|,|N2Y3-26-48ZB|,|144.96|,|119.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Rear Brake Pads 2016+
Manufacturer: Genuine Mazda Original Parts
NOTE: Picture shown is for illustration purpose only. Actual product may vary.
|,|"Brake Pads Mount Kit" "Select Here" "No" "Yes add(+$19.50)"|-||-|||-||9965-67-7070|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|Genuine Mazda Miata MX-5 OEM Silver Alloy Wheel 17 X 7 2006-2015|,|OEM-9965-38-7070|,|735.08|,|629.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Silver Alloy Wheel 17 X 7
Description: 17 X 7, SILVER
SKU: 2006-2015: 9965-38-7070
Manufacturer: Genuine Mazda Original Parts
|,|"Shipping cost" "add(+$49)"|-||-|||-||9965-58-7070|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2006-2015|,|Genuine Mazda Miata MX-5 OEM Silver Alloy Wheel 17 X 7 2008-2015|,|9965-58-7070|,|364.71|,|299.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Silver Alloy Wheel 17 X 7
Description: 17 X 7, SILVER
SKU:
2008-2012: 9965-58-7070
2013-2015: 9965-67-7070
Manufacturer: Genuine Mazda Original Parts
|,|"Select Year" "Select Here" "2008-2012 add(+$245)" "2013-2015"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||JE15-18-51X|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata MX-5 OEM Temp Sending Unit 1990-1997|,|JE15-18-51X|,|41.43|,|34.02|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Temp Sending Unit 1990-1997
Other Names: Engine Coolant Temperature Sender, Heat Gauge Unit
|,|||-||GENUINE-MAZDA-MIATA-MX-5-OEM-TOUCH-UP-PAINT-APPLICATORS|,||,|Genuine Mazda Miata MX-5 OEM Touch Up Paint Applicators 1/3 fl.oz|,|0000-92-MX5|,|15.95|,|12.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata MX-5 OEM Touch Up Paint Applicators 1/3 fl.oz
Genuine Mazda Miata MX-5 Touch Up Paint Applicators 1/3 fl.oz.This new and improved product includes a tip that has a pen attached to a flexible bottle for easy application. If not clear on color please state the last 8 of your VIN at checkout.
|,|"Year" "Select Here" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015" "2016"|-||-|"Color" "Select Here" "Brilliant Black Clearcoat (A3F)" "Brilliant Black (PZ)" "Black Mica (16W)" "Velocity Red Mica (27A)" "Liquid Silver (38P)" "Copper Red (32V)" "Dolphin Gray (39T)" "Sunlight Silver Metallic (22V)" "True Red (A4A)" "Stormy Blue (35J)" "Black Cherry Mica (28W)" "Sparkling Black Mica (35N)" "Galaxy Gray (32S)" "Titanium Gray Metallic (29Y)" "Crystal White Pearl (34K)" "Winning Blue Metallic (27B)"|-||-|||-||LD47-69-671|,|MAZDA-MX-5-MIATA-OEM-WHEEL-ACCESSORIES-2006-2015|,|Genuine Mazda Miata MX-5 OEM Wheel Lug Wrench 2006-2015|,|LD47-69-671|,|21.43|,|17.24|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Wheel Lug Wrench 2006-2015
|,|||-||NA1J-67-330|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata MX-5 OEM Wiper Blade 2016+|,|NA1J-67-330|,|23.40|,|18.95|,||,||,||,||,||,||,|Genuine Mazda Miata MX-5 OEM Wiper Blade 2016+
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$18.95)"|-||-|||-||NGKBLUSPARPL1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata NGK Blue Spark Plug Wire Set (1990-2000)|,|901-110|,|66.70|,|57.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata NGK Blue Spark Plug Wire Set (1990-2000)
Genuine Mazda Miata NGK Blue Spark Plug Wire Set (1990-2000). These are the factory replacement NGK Blue Spark Plug Wire Kit. Put the spark back into your Miata.
|,|"Year" "Select Here" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000"|-||-|||-||GENUINE-MAZDA-MIATA-NGK-SPARK-PLUGS-SET-OF-4-BKR5E-11|,|19MAMIMAVEAL|,|Genuine Mazda Miata NGK Spark Plugs set of 4 BKR5E-11 1992-2005|,|0000-18-BP01|,|26.20|,|19.90|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata NGK Spark Plugs set of 4 BKR5E-11
Genuine Mazda Miata NGK Spark Plugs set of 4 BKR5E-11. Set of 4 NGK Plugs. Need to be changed every 30,000 miles with a Fuel Filter,Air Filter and Oil Filter. Does not fit the Turbo Models.
|,|"Year" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GEOEMMAFITUF|,|MAPA191|,|Genuine Mazda Miata OEM Fill Tube Filter 1990-1997|,|OEM-BU55-19-890|,|24.70|,|19.45|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Fill Tube Filter 1990-1997
*VIN# Required.
|,|||-||GEMAMIFUPRRE2|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Fuel Pressure Regulator 1994-1997|,|KJ01-13-280|,|185.99|,|147.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM fuel pressure regulator for the 1994-1997.
|,|||-||GEMAMIFUPU11|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Fuel Pump 1990-1993|,|B61P-13-350B|,|518.28|,|409.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM fuel pump for the 1990-1993. Comes with Fuel pump and mounting hardware.
|,|"Need the Fuel Pressure Regulator?" "No" "Yes add (+$159.00)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM--IDLE-AIR-CONTROL-VALVE-1990-1993|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Idle Air Control Valve 1990-1993|,|B61P-20-660|,|869.17|,|699.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Idle Air Control Valve 1990-1993
|,|||-||GENUINE-MAZDA-MIATA-OEM--REAR-OIL-PAN-GASKET-PAN-SEAL|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Oil Pan Gasket (Seal)|,|OEM-B6F4-10-428|,|26.61|,|21.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Oil Pan Gasket (Seal)
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 and 2000.
|,|"Select Side" "Select Here" "Front" "Rear" "Both add(+$21.02)"|-||-|||-||MAMIWOPABRHA|,|NBINKN|,|Genuine Mazda Miata OEM Wood Parking Brake Handle|,|907-700|,|119.99|,|99.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wood Parking Brake Handle
**This product is no longer available from Mazda. Please see DON"T MISS section below for suggestions**
Mazda Miata Wood Parking Brake Handle.This is a great add on.
Available Years: 1999-2005
|,|||-||GEMAMIOEMFAW|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM "96 M Edition" Wheel 1994-1997 15x6|,|OEM-9965-E8-6050|,|525.74|,|453.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Factory Wheel 1994-1997
Equipped on the 1996 M-Edition Miata, but will fit any 1994-1997 Miata. 15x6. +45. 4x100.
Price is per wheel*
*Center caps not included
VIN REQUIRED at checkout for wheel and center caps
Part available from Japan ONLY.
12-16 weeks to get on regular order
or
CSO order will cost you $129.00 shipping 14-21 days.
|,|"Select Shipping Time" "Select Here" "12-16 Weeks for Regular Shipping" "2-3 Weeks - CSO Shipping add(+$129)"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||MAZDA-WINDSHIELD-SUNSCREEN-2006-2012|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM "Mazda" Windshield Sunscreen 2006-2014|,|0000-8M-D09A|,|73.95|,|63.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM "Mazda" Windshield Sunscreen 2006-2014
Help keep your MX-5's interior cool while parked. Silver reflective foldable material construction and includes the Mazda logo.
Windshield Sunshield Fits:
2006 + MX-5
|,|||-||GENUINE-MAZDA-MIATA-OEM-1-8-CLUTCH-KIT|,|ENPE19|,|Genuine Mazda Miata OEM 1.8 Clutch Kit|,|18-16410164601651011303|,|437.94|,|372.25|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM 1.8 Clutch Kit
Genuine Mazda Miata 1.8 Clutch Kit. Includes clutch disc, pressure plate, t/o bearing, pilot bearing.
|,|"Select Year" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GEMAMIOEM1971|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM 1994-1997 7-Spoke Polished 14x6|,|OEM-9965-19-6040|,|751.58|,|624.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM 1994-1997 7-Spoke Polished 14x6
Found on the 1994-1997 Miata. 14x6. Polished.
Price is for one wheel*
*Center caps not included
|,|"Need Center Cap?" "No Thanks" "Yes, I need a Center Cap add(+$30)"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||GEMAMIOEMFAW1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM 1994-1997 7-Spoke Silver 14x6|,|OEM-9965-13-6040|,|460.36|,|394.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM 1994-1997 7-Spoke Silver 14x6
Found on the 1994-1997 Miata. 14x6. Silver.
Price is for one wheel*
*Center caps not included
|,|"Need Center Cap?" "No Thanks" "Yes, I need a Center Cap add(+$25)"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||GEMAMIOEM20M1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM 2005 MAZDASPEED Racing Hart Alloy 17x7 Silver|,|OEM-9965-26-7070|,|544.84|,|479.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM 2005 MAZDASPEED Racing Hart Alloy 17x7 Silver
Came on 2005 models but will fit all 1990-2005 models.
Price is per wheel*
*Center caps not included
VIN REQUIRED at checkout for wheel and center caps
|,|"Shipping cost" "add(+$59)"|-||-|||-||NA-OEM-3RD-BRAKE-LIGHT|,|NBLIGHTING|,|Genuine Mazda Miata OEM 3rd Brake Light 1990-2005|,|OEM-NA01-51-580B|,|167.54|,|143.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM 3rd Brake Light 1990-2005
-Brand New From Mazda
|,|"Select Year" "Select Here" "1990-1997 add(+$60)" "1999-2005"|-||-|||-||GEMA3RDBRLIG|,|NAEXLI|,|Genuine Mazda Miata OEM 3rd Brake Light Gasket 1990-1997|,|NA01-51-592B|,|28.77|,|24.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM 3rd Brake Light Gasket
1990-1997: NA01-51-592B
|,|"Choose Year" "Select Here" "1990-1997"|-||-|||-||GEMACECA19|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM 7-Spoke Wheel Center Cap 1990-1992|,|OEM-NA01-37-190A|,|60.02|,|49.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM 7-Spoke Wheel Center Cap 1990-1992
For 1990-1992 7-Spoke Alloy OEM Wheel
Price is per center cap. If you need qty. 4 please update during check out to qty. 4.
|,|||-||GENUINE-MAZDA-MIATA-OEM-7-SPOKE-WHEEL-CENTER-CAP-1993|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM 7-Spoke Wheel Center Cap 1993-1994|,|NA52-37-190A|,|72.06|,|60.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM 7-Spoke Wheel Center Cap 1993-1994
Genuine Mazda Miata OEM 7-Spoke Wheel Center Cap 1993-1994
Center Cap Fits: 1993 Miata with Aluminum Wheel.
|,|||-||GEMAMIOEMACD2|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM A/C Hose 1990-1993|,|OEM-NA01-61-462D|,|119.95|,|105.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM A/C Hose 1990-1993
|,|||-||GEMAMIOEMACD1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM AC Drier 1999-2000|,|MAC-904-812|,|99.99|,|89.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM AC Drier 1999-2000
Item number 1 from the picture
Note: Brand - Mazda
|,|||-||LA01-66-310A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM ACTUATOR 1990-2005|,|la01-66-310a|,|515.26|,|440.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM ACTUATOR 1990-2005
#5 on the Second Diagram
Remanufactured OEM PARTS
|,|||-||GEMAMIAIRBAG1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Air Bag Control Bracket|,|903-381|,|19.99|,|16.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Air Bag Control Bracket
|,|||-||GEMAMIAIRBAG2|,|NBINSTWH|,|Genuine Mazda Miata OEM Air Bag Module 1999-2005|,|907-ABM|,|896.55|,|796.00|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Airbag Module for Years 1999-2005.
Driver's Side SKU: B33M-57-K00-00
Passenger's Side SKU: NC10-57-K70E-02
PART CAN BE FOUND AS REFERENCE #1 for Driver #2 for Passenger
IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Air Bag" "Passenger Air Bag add(+$1004)"|-||-|||-||NF47-57-K00G|,|20MAMIINSTWH|,|Genuine Mazda Miata OEM Air Bag Module 2006-2008|,|OEM-NF47-57-K00G|,|1,292.85|,|1,099.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Airbag Module for Years 2006-2008.
Driver Air Bag Without audio switch SKU: NF47-57-K00G
Driver Air Bag With audio switch: NE51-57-K00G
Passenger's Side SKU: NE51-57-K50A
PART CAN BE FOUND AS REFERENCE #1 for Driver #2 for Passenger
IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Air Bag Without audio switch" "Driver Air Bag With audio switch" "Passenger Air Bag"|-||-|||-||NH19-57-K00|,|20MAMIINSTWH|,|Genuine Mazda Miata OEM Air Bag Module 2009-2015|,|OEM-NH19-57-K00|,|895.95|,|659.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Airbag Module for Years 2009-2015.
Driver Air Bag With cruise control SKU: NH19-57-K00
Driver Air Bag Without cruise control SKU: NH18-57-K00
Passenger's Side SKU: NE51-57-K50A
PART CAN BE FOUND AS REFERENCE #1 for Driver #2 for Passenger
IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Air Bag With cruise control" "Driver Air Bag Without cruise control add(+$45)" "Passenger Air Bag add(+$199)"|-||-|||-||NA1J-57-K00A-02|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Air Bag Module 2016+|,|OEM-NA1J-57-K00A-02|,|729.95|,|609.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Airbag Module for Years 2016+
Driver's Side SKU: NA1J-57-K00A-02
Passenger's Side SKU: NA1J-57-K50
Side Air Bag SKU: Either NA1J-57-KB0A, or NA1J-57-KA0A
PART CAN BE FOUND AS REFERENCE #1 for Driver, #2 for Passenger, #3 for Side IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Air Bag" "Passenger Air Bag add(+$369)" "Driver - Side Air Bag" "Passenger - Side Air Bag"|-||-|||-||MAZDAAIRFILTER|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Air Filter 1990-2015|,|901-130|,|30.40|,|25.02|,||,||,|0.000 |,||,|fgjgvju|,||,|Genuine Mazda Miata Air Filter for years 1990-2015
Genuine Mazda Miata 90-97 Air Filter. Your Mazda air filter needs to be changed every 15,000 miles. Don't forget at 30,000 miles to change plugs, air filter, and fuel filter.
|,|"Select Year" 1990-1997 "1999-2002 add(+$10)" "2003-2005 add(+$10)" "2006-2015 add(+$15)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-AIRFILTER-|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Air Filter 2006-2015|,|LFG1-13-Z40|,|38.77|,|31.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Air Filter 2006-2015
Mazda Miata Genuine Airfilter.Your Miata says keep me breathing. I need to be changed every 15,000. Check and look at me every 7,500. Don't forget at 30,000 to change plugs and airfilter.
|,|||-||LFG1-13-Z02A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Air Filter Case 2006-2015|,|LFG1-13-Z02A|,|271.87|,|229.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Air Filter Case 2006-2015
|,|||-||LFG1-13-Z01A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Air Filter Case Cover 2006-2015|,|LFG1-13-Z01A|,|271.03|,|229.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Air Filter Case Cover 2006-2015
|,|||-||MAAIRINPI|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Air Intake Pipes 1990-2005|,|901-153|,|399.45|,|329.02|,||,||,|0.000 |,||,|fsfsef|,||,|Genuine Mazda Miata OEM Air Intake Pipes is for years 1990-2005
NOTE:
90-93: #8 IN FISRT ILLUSTRATION
94-97: #11 IN SECOND ILLUSTRATION
99-05: #16 IN THIRD ILLUSTRATION
|,|"Select Year" "Select Here" "90-93 (B61P-13-330E)" "94-97 (BPE8-13-331B) add(+$95)" "99-05 (BP4W-13-331B)"|-||-|||-||GEOEMMAAIRVA|,|MAPA19|,|Genuine Mazda Miata OEM Air Valve 1990-1993|,|OEM-B61P-13-190A|,|312.71|,|242.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Air Valve 1990-1993
|,|||-||GEOEMMAAIRVA1|,|MAPA19|,|Genuine Mazda Miata OEM Air Valve Gasket 1990-1993 1.6L|,|OEM-B6S7-13-ZC7|,|18.22|,|14.90|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Air Valve Gasket
For Mazda Miata Years: 1990, 1991, 1992, and 1993
For Mazda Miata: 1.6L
|,|||-||NA1J-V1-170|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda Miata OEM Alcantara Instrument Panel Lower Trim 2016-2017|,|NA1J-V1-170|,|409.95|,|369.45|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Alcantara Instrument Panel Lower Trim 2016-2017
Alcantara Ip Frnt Lower Panel
Add a more sporty and unique touch to the interior of your MX-5 with specially designed interior trim pieces.
|,|||-||GENUINE-MAZDA-MIATA-ALTERNATOR-BELT-1-8|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Alternator Belt 1994-2005|,|B6BF-18-381-9U|,|23.86|,|20.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Alternator Belt 1994-2005
Genuine Mazda Miata Alternator Belt 1.8. Your belts need to be checked every 15000 miles. Hate to be on a trip or going to work and have this break.
|,|"Year" "Select Here" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||MAMIANFEWI19|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Antenna Feeder Wiring 1990 Only|,|OEM-NA01-66-940C|,|181.20|,|139.02|,|Mazda Miata Antenna Feeder 1990 Only|,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Antenna Feeder Wiring 1990 Only
|,|||-||GEMAANHOPL|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Antenna Hole Plug|,|909-112|,|7.99|,|6.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Antenna Hole Plug
For removal of your antenna.
|,|||-||C235-64-660A|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda Miata OEM Ashtrays And Lighters 2016|,|OEM-C235-64-660A|,|35.95|,|25.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Ashtrays And Lighters 2016
Ashtray Fits In Cup-Holder
|,|||-||GEMAMIOEMAUS|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Automatic Shift Surround 1990-1993 |,|OEM-NA03-64-350C|,|101.03|,|82.75|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Automatic Shift Surround 1990-1993
|,|||-||GENUINE-MAZDA-MIATA-OEM-AUXILARY-CONSOLE-INPUT-CABLE-GENUINE-MAZDA-AUXILARY-CONSOLE-INPUT-CABLE|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda Miata OEM Auxilary Console Input Cable|,|0000-8F-Z08|,|14.95|,|11.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Auxilary Console Input Cable
|,|||-||GEMAMIBASN|,|SOFT-TOP|,|Genuine Mazda Miata OEM Ball Snap 1990-2000|,|NA01-R1-970A|,|32.97|,|26.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ball Snap 1990-2000
Genuine Mazda Miata OEM Ball Snap for the Miata Boot. This part goes on the body of the car.
Price is for one Ball Snap. If you need more select the number of quantity needed during check out.
Part can be found as reference #4 in illustration
|,|||-||GEMAMIOEMBAB|,|MAZDA-MX-5-MIATA-BATTERY-2006-2012|,|Genuine Mazda Miata OEM Battery Box Cover 2006-2015|,|OEM-LFG1-18-593B|,|59.98|,|50.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Battery Box Cover 2006-2015
For Mazda MX-5 Miata Years: From 2006 to 2015
|,|||-||BBSCECAP19|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM BBS Center Cap 1991-1997|,|OEM-M011-37-190|,|225.60|,|182.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM BBS Center Cap 1991-1997
Fits 1991-1997 M-Edition Mazda Miata.
Note: BBS caps DO NOT fit with the Genuine Mazda Wheel locks
|,|||-||GEMAMIOEMBBS|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM BBS Wheel 1990-1997 15x6|,|OEM-9965-C3-6050|,|1,417.69|,|1,220.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM BBS Wheel 1990-1997 15x6
Equipped on the 1993 Limited Edition Miata, but will fit any 1990-1997 Miata. 15x6. +45. 4x100.
*Price per rim. Order quantity 4 for full set
*Center caps not included
|,|"Shipping Cost" "add(+$59)"|-||-|||-||OEM-17X7-INCH-BBS-WHEELS|,|MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|Genuine Mazda Miata OEM Black BBS Wheels 17x7 2016-2021+|,|OEM-9965-98-7070|,|1,039.05|,|898.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Black BBS Wheels 17x7 2016-2021+
Price is per wheel*
*Center caps not included
|,|"Need Center Cap?" "No Thanks" "Yes, I need a Center Cap - NA6W-37-190 add(+$65)"|-||-|"Shipping cost" "add(+$59)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-INTERIOR-DOOR-HANDLE-1999-2000|,|NBINSEDO|,|Genuine Mazda Miata OEM BLACK Interior Door Handle 1999-2000|,|B01A-59-330D-02|,|49.43|,|39.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Interior Door Handle 1999-2000
Color: Black
1999-2000:
B01A-59-330D-02 (Driver Side),
B01A-58-330D-02 (Passenger Side)
* Make sure to select which side when ordering *
|,|"Select Side" "Select Here" "Driver" "Passenger"|-||-|||-||GEMAMIBLVACA|,|19901997|,|Genuine Mazda Miata OEM Bleeder Valve Cap|,|33-693A|,|5.99|,|4.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Bleeder Valve Cap
Fits: 1990-2005 Miata Calipers Front & Rear. Price is for one.
|,|||-||GEMAMIOEMBLO|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Block Off Plate 1990-1997|,|OEM-NA01-64-437-00|,|39.99|,|29.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Block Off Plate 1990-1997
Mounts in center console in place of power window switch for Mazda Miata's 1990-1997.
#7 shown in diagram.
|,|||-||NA01-61-C50A|,|NAAUDIO|,|Genuine Mazda Miata OEM BLOWER MOTOR SWITCH 1990-1997|,|NA01-61-C50A|,|61.11|,|49.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM BLOWER MOTOR SWITCH 1990-1997
#61-C50 on diagram.
|,|||-||CL8BORESY|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Bose Door Speakers & Tweeters 1999-2005|,|NC18-66-960D|,|1,196.58|,|962.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Bose Door Speakers & Tweeters 1999-2005
Genuine Mazda Miata OEM Bose Door Speakers & Tweeters 1999-2005 are Priced for the PAIR!
Included Both Side Speakers and Both Side Tweeters
NC12-66-960, NC18-66-960D
|,|||-||GENMAZFRONBR2|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Bra 1990-1997|,|OEM-0000-88-0190|,|172.95|,|159.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Bra "WITH OUT" Front Ait Dam (Black Lip Spoiler).
Custom-tailored to fit tight and look great, this heavy-duty vinyl cover with soft backing helps protect the front end from road debris. It's designed to allow the headlights to operate and hood to open without interference.
Supplies are limited Order today
|,|||-||GENMAZFRONMA|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Bra 2001-2005|,|OEM-0000-8G-D01-D02|,|319.99|,|279.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Bra 2001-2005
A stylish way to keep the front end free of scratches and nicks. Custom tailored for a snug fit, the front mask maybe used on Miata's with or without Fog Lights.
NOTE: These are not compatible with the GoMiata Diamond Grill
|,|"Select Year" "Select Here" "2001-2005 Without Spoiler" "2001-2005 With Spoiler"|-||-|||-||N243-56-B90D-N243-56-B9XD|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Bracket Bar 2016+|,|n243-56-b90d-n243-56-b9xd|,|155.06|,|122.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Bracket Bar 2016+
#2 and #3 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$98.02)"|-||-|||-||N243-69-742A|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Bracket Cover 2016+|,|N243-69-742A|,|226.97|,|179.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Bracket Cover 2016+
#7 and #8 in ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$179.02)"|-||-|||-||GEMABRHO1|,|19MAMIBRRORE|,|Genuine Mazda Miata OEM Brake Hoses 1990-1993|,|902-640|,|60.18|,|49.98|,||,||,|0.000 |,||,|vfsdg|,||,|Genuine Mazda Miata OEM Brake Hoses for Years 1990-1993
|,|"Please Select" "Select Here" "Front Driver Side" "Front Passenger Side" " " "Rear Driver Side add (+$12)" "Rear Passenger Side add(+$12)"|-||-|||-||NA75-43-820A|,|19MAMIBRRORE1|,|Genuine Mazda Miata OEM Brake Hoses 1994-2005|,|NA75-43-820A|,|46.07|,|39.04|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Brake Hoses 1994-2005
|,|"Please Select" "Select Here" "Front Driver Side" "Front Passenger Side" " " "Rear Driver Side" "Rear Passenger Side add(+$15)"|-||-|||-||MAMACY|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Brake Master Cylinder 1990-2000|,|902-905|,|196.99|,|172.05|,||,||,|0.000 |,||,|dsfaf|,||,|Genuine Mazda Miata OEM Brake Master Cylinder 1990-2000
New or Remanufactured
|,|"Please Select" "Select Here" "1990-1997 w/o ABS - Aftermarket" "1991-1997 w/ ABS add(+$25)" "1999-2000 w/o ABS" "1999-2000 w/ ABS add(+$25)"|-||-|"Core Charge" "add(+$50)"|-||-|||-||GENUINE-MAZDA-MIATA-BYPASS-HOSE-KIT-1-6|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Bypass Hose Kit 1.6|,|PKBPHK16|,|44.23|,|38.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Bypass Hose Kit 1.6
Genuine Mazda Miata OEM Bypass Hose Kit 1.6 contains the 4 smaller hoses on the engine.
|,|"Year" "1990" "1991" "1992" "1993"|-||-|||-||GENUINE-MAZDA-MIATA-BYPASS-HOSE-KIT-1-8-M1|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Bypass Hose Kit 1.8 M1|,|PKBPHK18M1|,|46.85|,|38.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Bypass Hose Kit 1.8 M1
Genuine Mazda Miata Bypass Hose Kit 1.8 M1. Contains the four small bypass hoses
|,|"Year" "1994" "1995" "1996" "1997"|-||-|||-||-GENUINE-MAZDA-MIATA-OEM-C-A-S--O-RING|,|MAPA191|,|Genuine Mazda Miata OEM C.A.S. O Ring|,|9954-10-3801|,|10.95|,|8.75|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM C.A.S. O Ring
Mazda Miata Crank Angle Sensor O ring.(On the back of the cylinder head.)
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||MACAMCOGA1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Cam / Valve Cover Gasket 2002-2005|,|903-232|,|38.05|,|31.02|,||,||,|0.000 |,||,|dsghth|,||,|Genuine Mazda Miata OEM Cam / Valve Cover Gasket is for Years 2002-2005
|,|||-||B61P-18-230A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Camshaft Position Sensor 1990-1997|,|B61P-18-230A|,|602.95|,|469.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Camshaft Sensor 1990-1997
#7 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Year" "Select Here" "1990-1994 add(+$99)" "1995-1997"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CAMSHAFT-POSITION-SENSOR|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Camshaft Position Sensor 1999-2005|,|ZJ10-18-221|,|149.58|,|119.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Camshaft Position Sensor 1999-2005
Genuine Mazda Miata Camshaft Position Sensor
|,|||-||FS05-10-602A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Camshaft Seal 1990-2005|,|FS05-10-602A|,|15.25|,|12.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Camshaft Seal 1990-2005
Manufacturer: Genuine Mazda Original Parts
|,|||-||GEMAMIOEMCED1|,||,|Genuine Mazda Miata OEM Center Dash Faceplate 94-97 with CD Player|,|NA75-55-210A-00|,|150.22|,|129.02|,||,||,|0.000 |,||,||,||,|If your current Miata center dash faceplate is cracked or damaged, this genuine OEM center dash faceplate will give your interior a new and fresh look. The Genuine Mazda Miata Center Dash Faceplate comes with one addition clip to be used with the original clips. This part is often also referred to as a "radio bezel".
Comes in black only.
|,|||-||GEMAMIOEMCED|,|NADASHBOARD|,|Genuine Mazda Miata OEM Center Dash Faceplate 94-97 without CD Player|,|NB38-55-210A-00|,|185.95|,|149.95|,||,||,|0.000 |,||,||,||,|If your current Miata center dash faceplate is cracked or damaged, this genuine OEM center dash faceplate will give your interior a new and fresh look. The Genuine Mazda Miata Center Dash Faceplate comes with one addition clip to be used with the original clips. This part is often also referred to as a "radio bezel".
Comes in black only.
|,|||-||GENUINE-MAZDA-MIATA-OEM-CENTER-HIGH-MOUNT-STOP-LIGHT--HIGH-MOUNT-LAMP-1999-2005|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Center High Mount Stop Lamp (3 Stop Light) 1999-2005|,|OEM-NC10-51-580C|,|188.11|,|156.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Center High Mount Stop Lamp (3 Stop Light) 1999-2005
|,|||-||NA01-R1-581D|,|SOFT-TOP|,|Genuine Mazda Miata OEM Center Rear Hook Plate 1990-2005|,|NA01-R1-581D|,|66.91|,|54.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Center Rear Hook Plate 1990-2005
Reference #4 in illustration
|,|||-||GENUINE-MAZDA-MIATA-OEM-CENTER-SUPPORT-PLATE-DRIVER-SIDE-1990-1997|,|MAPA191|,|Genuine Mazda Miata OEM Center Support Plate 1990-1997 (Driver Side)|,|NA01-50-1AYC|,|33.27|,|29.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Center Support Plate 1990-1997 (Right Side / Driver Side)
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||GENUINE-MAZDA-MIATA-OEM-CENTER-SUPPORT-PLATE-1990-1997|,|MAPA191|,|Genuine Mazda Miata OEM Center Support Plate 1990-1997 (Passenger Side)|,|NA01-50-2A0B|,|33.27|,|29.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Center Support Plate 1990-1997 (Right Side / Passenger Side)
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||MAMILUGNUT19|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Chrome Lug Nut 1990-2018|,|WH-LUG|,|12.99|,|9.64|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Lug Nut 1990-2018
Fits all years of Miata. The price is for one nut.
|,|||-||GENMAZSCUFPL|,|MIATA-OEM-INTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Chrome Scuff Plates 1999-2005|,|907-840|,|189.99|,|159.95|,||,||,|0.000 |,||,|dsfafa|,||,|Genuine Mazda Miata OEM Chrome Scuff Plates 1999-2005
Add style and protect your door sills from scratches with these durable bright scuff plates. Color matched to the interior of your car and features the Miata logo. (2 per set).
|,|"Select Year & Interior Color" "Select Here" "1999-2005 For Black Interior"
"1999-2002 For Tan Interior"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CLUB-EMBLEM-SET--2-|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda Miata OEM Club Emblem Set (2)|,|0000-8R-D27-2|,|44.95|,|37.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Club Emblem Set (2)
Genuine Mazda Miata Club Emblem Set.Get the look of the Club Trim
NOTE: Requested by Mazda for this Purchase
1. VIN REQUIRED at checkout to complete this purchase.
2. Pictures of VIN on car, either windshield or door jam.
3. Picture of fenders were emblem is missing.
Please send pictures to orders@gomiata.com
|,|"Year" "Select Year Here" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013"|-||-|||-||NC10-55-420B|,|NEW|,|Genuine Mazda Miata OEM Cluster Visor, Hood Meter 1999-2005|,|NC10-55-420B|,|204.50|,|179.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Cluster Visor, Hood Meter 1999-2005
|,|||-||GEMACLDI1NO|,|19MAMIDRREPA|,|Genuine Mazda Miata OEM Clutch Disc 1990-2015|,|909-136|,|76.86|,|64.42|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Clutch Disc 1994-2015
MX-5 MIATA and MAZDASPEED MX-5 MIATA (non-turbo). The Sport Clutch Disc is designed to provide a sportier feel while providing a higher clamp load. The package provides for faster shifting with a smooth streetable actuation when used with Sport Clutch Cover. Disc shown in background of photo.
1990-1993: B634-16-460C
1994-2005: BP07-16-460E-9U
2006-2015 5Speed: LF05-16-460A
2006-2015 6Speed: LF04-16-460B
|,|"Select Year" "Select Here" "1990-1993 add(+$20)" "1994-2005" "2006-2015 5Speed add(+$109)" "2006-2015 6Speed add(+$235)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CLUTCH-HOSE|,|ENPE19|,|Genuine Mazda Miata OEM Clutch Hose|,|GK67-41-380A|,|29.44|,|25.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Clutch Hose
Mazda Miata Clutch hose, Flexible, runs from slave cylinder to metal pipe that runs to clutch master cylinder.
|,|"Select Year" "1990" "1991" "1992" "1993" "1994"|-||-|||-||OEM-CLUTCH-HOSE-NB|,|19MAMIDRCLFL|,|Genuine Mazda Miata OEM Clutch Hose 1999-2005|,|OEM-NC10-41-380|,|49.53|,|40.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Clutch Hose 1999-2005
Mazda Miata Clutch hose, Flexible, runs from slave cylinder to metal pipe that runs to clutch master cylinder.
|,|||-||GEOEMMACLMAC|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Clutch Master Cylinder 1990-2005|,|OEM-NA01-41-400A|,|218.59|,|178.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Clutch Master Cylinder 1990-2005
Note: Will NOT work for the 2004-2005 Turbo MazdaSpeed Miata
|,|||-||F801-11-303|,|19MAMIDRREPA|,|Genuine Mazda Miata OEM Clutch Pilot Bearing 1990-2005|,|F801-11-303|,|26.41|,|20.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Clutch Pilot Bearing 1990-2005
|,|||-||GEMACLPL1|,|19MAMIDRREPA|,|Genuine Mazda Miata OEM Clutch Pressure Plate 1990-2015|,|909-913|,|328.35|,|128.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED OEM SPORT CLUTCH COVER for the Non-Turbo
MX-5 MIATA and MAZDASPEED MX-5 MIATA. The Sport Clutch Cover is designed to provide a sportier feel while providing a higher clamp load. The package provides for faster shifting with a smooth streetable actuation when used with Sport Clutch Disc.
|,|"Select Year" "Select Here" "1990-1993" "1994-2005 (BP11-16-410C) add(+$87)" "2006-2015 (LF04-16-410A) add(+$190)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CLUTCH-SLAVE-CYLINDER-REBUILD-KIT|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Clutch Slave Cylinder Rebuild Kit|,|FB01-49-460|,|26.11|,|23.55|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Clutch Slave Cylinder Rebuild Kit
Genuine Mazda Miata Clutch Slave Cylinder Rebuild Kit
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||B622-16-510|,|19MAMIDRREPA|,|Genuine Mazda Miata OEM Clutch Throwout Release Bearing 1990-2005|,|B622-16-510|,|89.78|,|72.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Clutch Throwout Release Bearing 1990-2005
|,|||-||GEMAMICOSPFR|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Genuine Mazda Miata OEM Coil Spring Front 1990-1993|,|909-SPRI|,|154.68|,|114.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Coil Spring Front for years 1990-1993
Price is for one spring.
|,|"Select Transmission" "Select Here" "Automatic" "5-Speed Manual add(+$15)"|-||-|||-||GEMAMIOEMCOS|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Coil Spring Front 1994-1997|,|OEM-NA03-34-011|,|120.98|,|98.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Coil Spring Front for Years 1994-1997
*Manual Transmission only.
*Price is per spring.
|,|"Select Transmission" "Select Here" "Automatic" "5-Speed Manual add(+$20)"|-||-|||-||GEMAMICOSPRE|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Genuine Mazda Miata OEM Coil Spring Rear - 1990-1993|,|909-SPRIR|,|162.35|,|117.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Coil Spring Rear for years 1990-1993
Price is for one spring.
|,|"Select Transmission" "Select Here" "Automatic" "5-Speed Manual add(+$15)"|-||-|||-||GEMAMIOEMCOS1|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Coil Spring Rear 1994-1997|,|OEM-NA01-28-011C|,|162.35|,|114.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Coil Spring Rear for Years 1994-1997
*Manual Transmission only.
*Price is per spring.
|,|"Select Transmission" "Select Here" "Automatic" "5-Speed Manual add(+$15)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-COMBINATION-SWITCH-1990-1997|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Combination Switch 1990-1997|,|NB17-66-120A|,|657.32|,|573.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Combination Switch 1990-1997
|,|"Select Option" "Select Here" "Without Cruise Control" "With Cruise Control"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-COMPRESSOR-CLUTCH-ASSEMBLY-1994-2000-FACTORY-NA75-61-450|,|MAPA191|,|Genuine Mazda Miata OEM Compressor Clutch Assembly 1994-2000|,|OEM-NA75-61-450|,|545.45|,|475.63|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Compressor Clutch Assembly 1994-2000
Description
Genuine Mazda Miata Compressor Clutch Assembly.94-2000 Miata Compressor and Clutch assembly new.
|,|"Year" "1994" "1995" "1996" "1997" "1998" "1999" "2000"|-||-|||-||GEMAMIOEMCOF1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Condenser Fan Assembly 1999-2005|,|OEM-B6MC-15-035|,|439.99|,|379.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Condenser Fan Assembly
For Mazda MX-5 Miata Years: 1999, 2000, 2001, 2002, 2003, 2004, and 2005
|,|||-||NE52-R1-6M2|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Genuine Mazda Miata OEM Convertible Top Motor 2006-2015|,|NE52-R1-6M2|,|572.17|,|482.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Convertible Top Motor 2006-2015
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$482.02)"|-||-|||-||MAZDA-MX-5-MIATA-CONVERTIBLE-TOP-SEAL-FRONT-W-STRIP-2006-2015|,|SOFTTOPNC|,|Genuine Mazda Miata OEM Convertible Top Weather Stripping 2006-2015|,|NE51-R1-421E-NE51-R1-412F|,|235.70|,|198.00|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Convertible Top Weather Stripping 2006-2015
Part Number 19 & 20 on the diagram
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both side add(+$198)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-COOLANT-OVERFLOW-TANK-EXPANSION-TANK-1990-1997|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Coolant Overflow Tank (Expansion Tank) 1990-1997|,|B61P-15-350D|,|77.76|,|67.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Coolant Overflow Tank (Expansion Tank) 1990-1997
Fit Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997.
|,|||-||N350-18-840|,|20MAMIENPECO|,|Genuine Mazda Miata OEM Coolant Temp Sensor 1990-1994|,|n350-18-840|,|92.67|,|71.15|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Coolant Temp Sensor 1990-1994
Other name: Coolant Temp Sensor, Engine Cooling Fan Switch
|,|||-||B593-18-840A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Coolant Temp Sensor 1995-1997|,|B593-18-840A|,|54.94|,|44.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Coolant Temp Sensor 1995-1997
Other name: Coolant Temp Sensor, Engine Cooling Fan Switch
|,|||-||KLK1-18-840|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Coolant Temp Sensor 1999-2005|,|KLK1-18-840|,|49.83|,|40.25|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Coolant Temp Sensor 1999-2005
Other name: Coolant Temp Sensor, Engine Cooling Fan Switch
|,|||-||L35G-18-840|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Coolant Temp Sensor 2006-2015|,|L35G-18-840|,|42.03|,|36.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Coolant Temp Sensor 2006-2015
Other name: Coolant Temp Sensor, Engine Cooling Fan Switch
|,|||-||SH01-18-840|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Coolant Temp Sensor 2016-2020|,|SH01-18-840|,|67.92|,|49.09|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Coolant Temp Sensor 2016-2020
Other name: Coolant Temp Sensor, Sensor Water Temp
|,|||-||GEMAMIOEMCOF2|,|MAPA191|,|Genuine Mazda Miata OEM Cooling Fan Relay 1990-1997|,|B462-67-740A|,|107.95|,|87.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Cooling Fan Relay
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|"Select Year" "Select Here" "1990-1993" "1994-1997"|-||-|||-||GENUINE-MAZDA-MIATA-COOLING-O-RING|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Cooling O-ring|,|B61P-15-106A|,|4.28|,|3.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Cooling O-ring
O ring for thermostsat housing.
|,|"Year" "1990" "1991" "1992" "1993"|-||-|||-||NE51-55-22YA-02|,|20MAMIINAC|,|Genuine Mazda Miata OEM Cover Hole 2006-2008|,|NE51-55-22YA-02|,|45.34|,|34.54|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Cover Hole 2006-2008
REFERENCE #7 IN ILLUSTRATION
NE51-55-22YA-02 - Black
NE51-55-22YA-89 - Tan
|,|"Select Color" "Select Here" "Black" "Tan"|-||-|||-||GENUINE-MAZDA-MIATA-COWL-GRILLE|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Cowl Grille 1990-2005|,|NA01-50-790E-2-NA01-50-797A|,|362.50|,|298.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Cowl Grille 1990-2005
Is your Genuine Mazda Miata OEM Cowl Grille fading, cracking or broken? Replace with a new one. Includes 2 screw cover caps.
|,|"Year" "Select Here" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CRANK-PULLEY-BOLT|,|MAPA19|,|Genuine Mazda Miata OEM Crank Pulley Bolt 1990-2005|,|B630-11-406C|,|22.67|,|18.45|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Crank Pulley Bolt
Miata crank pulley bolt. Up to production 09/10/90.
1990-1992: B63011406C
1993-2005: B3C711406
|,|"Select Year" "Select Here" "1990-1992" "1993-2005"|-||-|||-||MACRANSE|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Crank Shaft Angle Sensor|,|903-375|,|487.85|,|449.95|,||,||,|0.000 |,||,|ceg|,||,|Genuine Mazda Miata OEM Crank Shaft Angle Sensor for years 1990-2003
|,|"Select Year" 94+ "90-93 add(+$80.00)"|-||-|||-||GEMAMICRWMAB|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Crankshaft 1990-2015|,|909-1004|,|1,338.95|,|1,099.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Crankshaft with Main Bearings 1990-2015
Part can be found as reference #28 in illustration
|,|"Select Year" "Select Here" "1991-1995 Short Nose" "1991-1995 Long Nose" "1996-2005 Remanufactured" "2006-2015"|-||-|"Shipping Cost" "add(+$105)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-CRANKSHAFT-WOODRUFF-KEY|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Crankshaft Woodruff Key|,|B3C7-11-317|,|9.47|,|6.68|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Crankshaft Woodruff Key
Genuine Mazda Miata Crankshaft Woodruff Key broke,lost,worn or bent? Replace it with a new one.
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GEMAMICRCOPR2|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Cruise Control Processor 2001-2005|,|909-863|,|149.99|,|114.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Cruise Control Processor
For Mazda Miata Years: 2001, 2002, 2003, 2004, & 2005
|,|||-||GEMAMIOEMCRC|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Cruise Control Turn signal Indicator (On Steering Colum) 1992-1994|,|909-500|,|479.99|,|399.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Cruise Control Turn signal Indicator (On Steering Colum)
For Miata Years: 1992, 1993, and 1994
|,|||-||GEMAMIOEMCU1|,|MIATA-OEM-INTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Cubby 1999-2005|,|OEM-B02A-66-9M0A|,|39.95|,|29.95|,||,||,|0.000 |,||,||,||,|Is your cubby that sits below the center dash faceplace broke or cracked? Well Go Miata has the peace you have been looking for! This is a Genuine Mazda Miata OEM Cubby and it comes in black color. The cubby is for the years 1999-2005.
|,|||-||GENUINE-MAZDA-MIATA-OEM--CYLINDER-HEAD---COVER--WASHER--1990-2005|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Cylinder Head & Cover (Washer) 1990-2005|,|ZJ01-10-138|,|6.99|,|3.45|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Cylinder Head & Cover (Washer) 1990-2005
|,|||-||GENUINE-MAZDA-MIATA-OEM-CYLINDER--GASKET---2001-2005|,|19MAMIEXGAAN1|,|Genuine Mazda Miata OEM Cylinder Head (Gasket) 2001-2005|,|BP6D-10-271|,|81.84|,|73.65|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Cylinder Head (Gasket) 2001-2005
|,|||-||GENUINE-MAZDA-MIATA-OEM-CYLINDER-HEAD-BOLT-1990-2005|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Cylinder Head Bolt 1990-2005|,|B660-10-135A|,|24.89|,|21.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Cylinder Head Bolt 1990-2005
|,|||-||MAHEGASET|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Cylinder Head Gasket 1990-1997|,|903-215|,|89.99|,|65.95|,||,||,|0.000 |,||,|verg|,||,|Miata cylinder head gasket - Genuine Mazda
(94-97 shown)for year 1990-1997
|,|"Select Year" "90-93" "94-97 add(+$10.00)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-DASH-BOARD-CRASH-PAD-1994-1997-BASE-TRIM|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Dash Board (Crash Pad) 1994-1997 - Base Trim|,|NA7-560-350B-00|,|629.05|,|589.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Dash Board (Crash Pad) 1994-1997 - Base Trim
Genuine Mazda Miata OEM Dash Board (Crash Pad).
Color: Black
For Mazda Base Trim Miata Years: 1994, 1995, 1996, and 1997
|,|||-||GEOEMMADAHOC|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Dash Hole Covers 1990-1997|,|OEM-NA01-64-912A-00|,|3.95|,|2.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Dash Hole Covers 1990-1997
|,|||-||GENUINE-MAZDA-MIATA-OEM-DASH-POT-FOR-THROTTLE-BODY|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Dash Pot for Throttle Body|,|B61P-13-W80|,|155.57|,|129.02|,||,||,|0.000 |,||,||,||,| Genuine Mazda Miata OEM Dash Pot for Throttle Body
Mazda Miata Dash Pot for Throttle Body
|,|"Select Year" "1990" "1991" "1992" "1993"|-||-|||-||NA6W-51-060D-|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Daytime Run Lamp 2016+|,|OEM-NA6W-51-060D|,|219.32|,|182.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Daytime Run Lamp 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|"Select Option" "Select Here" "Without LED Strip" "With LED Strip add(+$80)"|-||-|||-||GEMAMIDARULA|,|NAEXLI|,|Genuine Mazda Miata OEM Daytime Running Light Module 1994-1997|,|909-117|,|172.82|,|139.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Daytime Running Light Module 1994-1997
This module allows your front turn signals to always be on for better visibility to oncoming traffic. It installs in less than a minute under your dash! Because of the laws in Canada where DRLs are mandatory, there is already a spot for it from the factory, so all you have to do is plug it in. Make your Miata safer without running your headlights popped-up all the time!
|,|"Year" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-DAYTIME-RUNNING-LIGHT-MODULE-2001-2005|,|NBLIGHTING|,|Genuine Mazda Miata OEM Daytime Running Light Module 2001-2005|,|OEM-NC7267750|,|181.19|,|152.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Daytime Running Light Module 2001-2005
*Special Order-cannot be cancelled or returned once the order has been processed, takes 4-5 Business days to get
This module allows your front turn signals to always be on for better visibility to oncoming traffic. It installs in less than a minute under your dash!
Because of the laws in Canada where DRLs are mandatory, there is already a spot for it from the factory, so all you have to do is plug it in. Make your Miata safer without running your headlights on all the time!
|,|||-||DEDETIUN92|,|SOFT-TOP|,|Genuine Mazda Miata OEM Defog / Defroster Timing Unit 1992-1993|,|NA01-67-7T0|,|115.23|,|104.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Defog / Defroster Timing Unit 1992-1993
If you're installing a hard top wiring harness on your 1992-1993 Mazda Miata, you'll need this item.
Also sometimes refered to as the timing relay.
|,|||-||GENUINE-MAZDA-MIATA-OEM-DONUT-STYLE-GASKET-2006-2013--LF45-40-305-|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Donut Style Gasket 2006-2013 (LF45-40-305)|,|OEM-PE23-40-305|,|19.99|,|14.85|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Donut Style Gasket 2006-2013 (LF45-40-305)
These do-nut style compression gaskets are used between various exhaust components in a typical Mazda exhaust system. These gaskets are designed to fit over the end of the exhaust tube that extends slightly beyond the edge of the mounting flange. Once seated in the recess area on the flange, these gaskets will compress when tightened, providing excellent sealing qualities. Mazda part number - LF45-40-305
Dimensions: 74mm OD x 62mm ID x 5mm Th
This gasket is used on the following Miata applications:
- Between the 1999-2005 Racing Beat header and the connecting pipe (stock or the Racing Beat Race pipe) This gasket has a larger ID than the factory gasket that would normally be used at this connection.
- The inlet to the muffler on the 2007-2013 MX-5 Miata.
|,|||-||GEMAMIARBL|,|NASEATSDOOR|,|Genuine Mazda Miata OEM Door Armrest - Black 1990-1997|,|BF70-69-370C-00|,|74.40|,|65.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Door Armrest - Black 1990-1997
#3 IN ILLUSTRATION
Color: Black
|,|"Select Side" "Select Here" "Driver" "Passenger" "Both Side add(+$65.02)"|-||-|||-||NA1J-V1-200|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda Miata OEM Door Panel Center Trim Alcantara 2016-2017|,|NA1J-V1-200|,|610.99|,|569.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Door Panel Center Trim Alcantara 2016
Alcantara Door Center
Add a more sporty and unique touch to the interior of your MX-5 with specially designed interior trim pieces.
|,|||-||0000-8T-D36|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda Miata OEM Door Sill Trim Plates 2016+|,|OEM-0000-8T-D36|,|174.95|,|143.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Door Sill Trim Plates 2016+
These gleaming doorsills are a stylish calling card to both a welcome entry and graceful exit.
|,|||-||GENUINE-MAZDA-MIATA-OEM-DRIVE-BELT-WITH-A-C|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Drive Belt, V Belt with A/C 2006-2015|,|LFG1-15-909B-9U|,|67.45|,|54.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Drive Belt, V Belt with A/C
Genuine Mazda Miata Drive Belt with A/C.This belt works the pulleys. On the Mazda Miata one belt runs the A/C,P/S,and the Alt. Only use Genuine Mazda Parts and Accessories.
|,|||-||GENUINE-MAZDA-MIATA-DRIVER-SIDE-ELECTRIC-MIRROR|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Driver Side Power Mirror 1990-1997|,|NA52-69-180C-XX|,|364.43|,|312.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Driver Side Power Mirror 1990-1997
Genuine Mazda Miata Driver Side Electric Mirror. Painted and ready to install. Limited availability on certain colors.
SU - Classic Red
18 - Artvin Red
|,|"Color" "Select Here" "Artvin Red" "Classic Red"|-||-|||-||N0Z7-26-98ZR-99ZR-T0|,|19MAMIBRROVI1|,|Genuine Mazda Miata OEM Driver's Rear Caliper With SPORT SUSPENSION 1999-2005|,|N0Z7-26-99ZR-T0|,|298.95|,|249.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Driver's Rear Caliper With SPORT SUSPENSION 1999-2005
|,|||-||NA01-26-990R-TA|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Genuine Mazda Miata OEM Driver's Side Rear Caliper 1990-1993|,|NA01-26-990R-TA|,|285.95|,|242.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Driver's Side Rear Caliper 1990-1993
Mazda OEM part number NA01-26-990R-TA is a factory original Mazda Miata Base Driver Side Caliper. This is a genuine Mazda part, the manufacturer's recommended part for your vehicle.
The core charge will be refunded once the old caliper has been returned to us with a copy of the invoice. Returned caliper cores must be complete.
NOTE: * This part only comes remanufactured by Mazda
|,|"Select Year" "Select Here" "1990" "1991" "1992" "1993"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-DRIVER-S-SIDE-REAR-CALIPER-1994-2000-|,|19MAMIBRRORO1|,|Genuine Mazda Miata OEM Driver's Side Rear Caliper With Normal Suspension 1994-2005|,|NAZ5-26-99ZR-T0|,|298.96|,|256.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Driver's Side Rear Caliper With Normal Suspension (1994-2005)
Mazda OEM part number NAZ5-26-99ZR-T0 is a factory original Mazda Miata Base Driver Side Caliper. This is a genuine Mazda part, the manufacturer's recommended part for your vehicle.
The core charge will be refunded once the old caliper has been returned to us with a copy of the invoice. Returned caliper cores must be complete.
NOTE:
* This part only comes remanufactured by Mazda
|,|"Select Year" "Select Here" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-DRIVERS-SIDE-REPLACEMENT-FOGLAMP|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda Miata OEM Drivers Side Replacement Foglamp 2006-2015|,|LE46-51-690C|,|200.16|,|167.55|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Drivers Side Replacement Foglamp 2006-2015
Genuine Mazda Drivers Side Foglamp cracked or broke? Replace it with a genuine Mazda Miata factory foglamp.Comes with new sockets and bulbs.
|,|"Select Year" "Select Here" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||BP6F-20-310A|,|19MAMIEXVEAL1|,|Genuine Mazda Miata OEM EGR Tube 1999-2005|,|BP6F-20-310A|,|72.11|,|64.98|,||,||,||,||,||,||,|Genuine Mazda Miata OEM EGR Tube 1999-2005
|,|||-||MAELIGSW|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Electric Ignition Switch|,|925-201|,|117.03|,|56.65|,||,||,|0.000 |,||,|jhvjhv|,||,|Genuine Mazda Miata OEM Electric Ignition Switch for years 1990-1997
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||MAZDAHANGER|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Genuine Mazda Miata OEM Exhaust Hanger|,|921-595|,|11.09|,|8.29|,||,||,|0.000 |,||,|vergerg|,||,|Genuine Mazda Miata OEM Exhaust Hanger for Years 1990-1997
|,|||-||KL16-40-061|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Exhaust Hanger 1999-2020|,|KL16-40-061|,|24.55|,|13.85|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Exhaust Hanger 1999-2020
|,|||-||GENUINE-MAZDA-MIATA-OEM-EXHAUST-HANGER-2006-2014-LF46-40-061|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Exhaust Hanger 2006-2015 (LF46-40-061)|,|LF46-40-061|,|16.58|,|14.03|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Exhaust Hanger 2006-2015 (LF46-40-061)
This Genuine Mazda Miata OEM Exhaust Hanger (LF46-40-061) can be used to replace the old, worn original rubber hangers on your MX-5 Miata. If you are installing a new exhaust system it is worth considering the replacement of the original hangers to ensure that your new exhaust system is correctly positioned on your chassis.
Refer to the diagram above to determine the correct number of hangers (pink) required for your application.
- Muffler Section - Two (2) hangers are required in the positions shown on the diagram. Two (2) additional hangers are required as shown by Mazda part number N3H2-40-061A. Note the position of these hangers!!
|,|||-||GENUINE-MAZDA-MIATA-OEM-EXHAUST-HANGER-2006-2014|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Exhaust Hanger 2006-2015 (N3H2-40-061A)|,|N3H2-40-061A|,|16.58|,|14.03|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Exhaust Hanger 2006-2015
These genuine Mazda exhaust hangers (N3H2-40-061A) can be used to replace the old, worn orignal rubber hangers on your MX-5 Miata. If you are installing a new exhaust system it is worth considering the replacement of the original rubber exhaust hangers to ensure that your new exhaust system is correctly positioned on your chassis.
Refer to the diagrams above to determine the correct number of hangers (yellow) required for your application.
- Muffler Section - Two (2) hangers are required in the positions shown on the diagram. Two (2) additional hangers are required as shown by Mazda part number LF46-40-061. Note the position of these hangers!!
- Connecting Pipe Section (also Racing Beat Race Connecting Pipe) - One (1) hanger is required.
|,|||-||MAEXMASIAUTR|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Exhaust Main Silencers Auto Transmission 1991-1997|,|921-520|,|299.99|,|239.95|,||,||,|0.000 |,||,|spfl|,||,|Genuine Mazda Miata OEM Exhaust Main Silencers Auto Transmission for years 1991-1997
|,|"Select Year" "91-93" "94-95" "96-97"|-||-|||-||MAEXMASIMATR|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Exhaust Main Silencers Manual Transmission 1990-1997|,|921-525|,|299.99|,|239.95|,||,||,|0.000 |,||,|dfgsrg|,||,|Genuine Mazda Miata OEM Exhaust Main Silencers Manual Transmission for years 1990-1997
|,|"Select Year" "1990-1993" "1994-1995" "1996-1997"|-||-|||-||GEMAMIOEMEXM|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Exhaust Manifold 1990-1997|,|OEM-B61P-13-450B|,|430.57|,|389.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Exhaust Manifold 1990-1997
OEM Replacement Manifold
*VIN Required
|,|"Select Year" "Select Here" "1990-1993" "1994-1997 add(+$165)"|-||-|"Shipping Cost" "add(+$79)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-EXHAUST-MANIFOLD-1999-2000-18L|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Exhaust Manifold 1999-2000 - Federal|,|BP4W-13-450|,|575.84|,|468.04|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Exhaust Manifold 1999-2000 - Federal
#1 on the picture above.
Genuine Mazda Miata OEM Replacement Manifold
* VIN Required
* For Manual Transmission
|,|"Shipping Cost" "add(+$69)"|-||-|||-||MAEXMAGA|,|19MAMIEXREPA1|,|Genuine Mazda Miata OEM Exhaust Manifold Gasket 1990-2005|,|921-400|,|22.04|,|19.02|,||,||,|0.000 |,||,|dsfgew|,||,|Genuine Mazda Miata Exhaust Manifold Gasket for years 1990-1997
1990-1993 SKU: B695-13-460A
1994-1997 SKU: BP05-13-460
1999-2005 SKU: BPD3-13-460
|,|"Select Year" "Select Here" "1990-1993 (B695-13-460A)" "1994-1997 (BP05-13-460)" "1999-2005 (BPD3-13-460)"|-||-|||-||OEM-NC-EXHAMAINGASK|,|20MAMIEXHECO|,|Genuine Mazda Miata OEM Exhaust Manifold Gasket 2006-2015|,|OEM-L327-13-460B|,|26.36|,|23.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Exhaust Manifold Gasket 2006-2015
Exhaust Manifold Gasket Fits:
2006 + MX-5
|,|||-||LF45-13-390D|,|20MAMIEXHECO|,|Genuine Mazda Miata OEM Exhaust Manifold Heat Shield 2006-2015|,|LF45-13-390D|,|96.18|,|82.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Exhaust Manifold Heat Shield 2006-2015
#9 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|||-||GENUINE-MAZDA-MIATA-OEM-EXHAUST-MANIFOLD-GASKET-B695-13-462|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Exhaust Manifold Outer Gasket 1990-1993|,|OEM-B695-13-462|,|20.67|,|16.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Miata Exhaust Manifold Gasket 1990-1993
SKU: B695-13-462: 1990-1993
For Mazda Miata Years: 1990, 1991, 1992, 1993
|,|||-||B690-40-450|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Genuine Mazda Miata OEM Exhaust Pipe To Manifold Gasket 1990-1997|,|B690-40-450|,|12.20|,|8.59|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Exhaust Pipe To Manifold Gasket
|,|||-||B690-40-305|,|19MAMIEXGAAN|,|Genuine Mazda Miata OEM Exhaust, Catalytic Converter Multi-Use Gasket 1990-1997|,|B690-40-305|,|15.99|,|13.05|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Exhaust, Catalytic Converter Multi-Use Gasket 1990-1997
Calif. Exhaust Pipe Connector Gasket. Federal. Gasket for Catalytic Converter System. Pipe Connector. Catalytic Converter. Seal.
1990-93 Miata:
- Catalytic converter to connecting pipe. This gasket can be used on the outlet of the catalytic converter between the either the Mazda OE exhaust system, or the Racing Beat connecting pipe section.
- Connecting pipe to muffler. This gasket can be used between the Racing Beat connecting pipe section (both Sport and Power Pulse versions) and the Racing Beat muffler.
1994-97 Miata:
- Racing Beat header outlet to Mazda OE catalytic converter inlet.
- Catalytic converter to connecting pipe. This gasket can be used on the outlet of the catalytic converter between the either the Mazda OE exhaust system, or the Racing Beat connecting pipe section.
- Connecting pipe to muffler. This gasket can be used between the Racing Beat connecting pipe section (both Sport and Power Pulse versions) and the Racing Beat muffler.
|,|||-||GENUINE-MAZDA-MIATA-OEM-FACTORY-ALTERNATOR-1999-2000|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Factory Alternator 1999-2005|,|OEM-BP4W-18-300R-0C|,|449.99|,|398.45|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Factory Alternator 1999-2005
**Remanufactured Alternator**
Fits: 1999-2005 Mazda Miata
|,|"Select Year" "Select Here" "1999-2000 add(+$40)" "2001-2005"|-||-|||-||MAFACOFAN|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Factory Condenser Fan 1990-1997|,|905-401|,|227.69|,|172.02|,||,||,|0.000 |,||,|dsgr|,||,|Genuine Mazda Miata OEM Factory Condenser Fan 1990-1997
REMANUFACTURED PRODUCT
|,|||-||MAZFACFOG|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Factory Fog Lights, Foglamp 2001-2005|,|909-330|,|310.23|,|262.02|,||,||,|0.000 |,||,|sfdgsdfg|,||,|Genuine Mazda Miata OEM Factory Foglamp 2001-2005
This is a genuine Mazda Miata OEM replacement fog lamp for the M2. This foglight is interchangeable and work on both sides of the car.
|,|"Select Year" "Select Here" "2001-2003" "2004-2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-MAZDA-MIATA-FACTORY-REMANUFACTURED-ALTERNATOR-1990-1991-1992-1993-MANUAL-TRA|,|MAPA19|,|Genuine Mazda Miata OEM Factory Reman Alternator 1990-1993 (Manual Transmission)|,|OEM-B61P-18-300R-00|,|536.35|,|424.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Factory Reman Alternator 1990-1993 (Manual Transmission)
Factory Remanufactured Alternator Fits: 1990-1993 Miata w/Manual Transmission
|,|||-||NA01-56-131A|,|NAEXBOST|,|Genuine Mazda Miata OEM FENDER LINER 1990-2005|,|NA01-56-131A|,|115.02|,|92.02|,||,||,||,||,||,||,|Mazda Miata OEM FENDER LINER 1990-2005
Manufacturer: Genuine Mazda Original Parts
PART CAN BE FOUND AS REFERENCE #2 IN ILLUSTRATION
|,|"Select Year" "Select Here" "1990-1997" "1999-2005" "2006-2015 add($+10)"|-||-|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|||-||OEM-NC49-42-232|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Filler Hose (Small) 2001-2005|,|OEM-NC49-42-232|,|6.77|,|5.42|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Filler Hose (Small) 2001-2005
Picture unavailable
Mazda part# NC49-42-232
|,|||-||OEM-NA01-42-241C|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Filler Neck Hose (Large) 1990-1997|,|OEM-NA01-42-241C|,|60.52|,|52.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Filler Neck Hose (Large) 1990-1997
Part#8 shown in Diagram
Mazda part# NA01-42-241C
|,|||-||OEM-NC10-42-210H|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Filler Neck 1999-2000|,|OEM-NC10-42-210H|,|274.69|,|219.75|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Filler Neck 1999-2000
Part#8 on Diagram shown
Mazda part#NC10-42-210H
|,|||-||OEM-NC49-42-210E|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Filler Neck 2001-2005|,|OEM-NC49-42-210E|,|104.94|,|83.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Filler Neck 2001-2005
#8 on Diagram shown
Mazda part# NC49-42-210E
|,|||-||OEM-NF79-42-210E1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Filler Neck 2006-2014|,|OEM-NF79-42-210E|,|107.74|,|86.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Filler Neck 2006-2014
#11 on Diagram Shown
Mazda part# NF79-42-210E
|,|||-||OEM-NC10-42-231|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Filler Neck Hose (Large) 1999-2005|,|OEM-NC10-42-231|,|58.43|,|49.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Filler Neck Hose (Large) 1999-2000
#11 on Diagram shown
Mazda part# NC10-42-231
|,|||-||OEM-NE51-42-231B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Filler Neck Hose (Large) 2006-2014|,|OEM-NE51-42-231B|,|76.93|,|51.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Filler Neck Hose (Large) 2006-2014
No Picture Available
Mazda part# NE51-42-231B
|,|||-||OEM-NE51-42-232B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Filler Neck Hose (Small) 2006-2014|,|OEM-NE51-42-232B|,|24.30|,|18.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Filler Neck Hose (Small) 2006-2014
#15 on Diagram Shown
Mazda Part# NE51-42-232B
|,|||-||MIFIPA90|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Finishing Panel 1990-1997|,|508-000|,|596.52|,|472.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Finishing Panel 1990-1997
Part can be found as reference #7 in illustration
This is a Genuine Mazda Miata Finishing Panel and comes prepainted to match your car. Please provide VIN at checkout in "comments" box.
|,|||-||GENUINE-MAZDA-MIATA-OEM-FLYWHEEL-BOLT--EACH-|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Flywheel Bolt (each)|,|F201-11-511A|,|6.46|,|5.35|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Flywheel Bolt (each)
Mazda Miata Flywheel Bolt for Manual Transmission vehicles.It takes 6 per vehicle.
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GEMAMIFRBRBO1|,|NAEXVIALL|,|Genuine Mazda Miata OEM Frame Bracket Bolt 1990-1997|,|NA01-50-18X|,|9.11|,|7.30|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Frame Bracket Bolt.
Two required for installation.
Price is for a single bolt. Item #28 in illustration.
|,|||-||GEMAMIFRBRBO|,|19992005|,|Genuine Mazda Miata OEM Frame Bracket Bolt 1999-2005|,|OEM-NA01-50-18X|,|11.15|,|8.98|,||,||,|0.000 |,||,||,||,|Part can be found as reference #28 in illustration
|,|||-||GEMAFRBRPA|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Front Brake Pads 2001-2005|,|902-430|,|144.70|,|112.02|,||,||,|0.000 |,||,|csdfg|,||,|Genuine Mazda Miata OEM Front Brake Pads for the years 2001-2005
|,|"Please Select" "Normal Suspension" "Sport Suspension add(+$10.00)|-||-|||-||GENMAZFRONBR1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Front Brake Pads Kit 1994-2000|,|902-420|,|128.95|,|102.02|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Front Brake Pads Kits for years 1994-2000
Genuine Mazda Miata Front Brake Pad Kit with hardware and clips.
Brake Pads: NCY1-33-23Z
Hardware & Clips: NAY5-33-29Z-MV
|,|"Do you need the Hardware and Clips?" "No" "Yes add(+$15.95)"|-||-|||-||MAZOEMFRONBR|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Front Brake Rotor 1990-1993|,|902-510|,|118.99|,|97.95|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Front Brake Rotor for years 1990-1993
|,|"Special Handling fee" "add(+$10)"|-||-|||-||MAZOEMFRONBR1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Front Brake Rotor 1994-2005|,|902-515|,|110.37|,|89.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Brake Rotor for years 1994-2005
Positions: Left, Right
Other Names: Plate Disc
|,|"Select Suspension" "Select Here" "Normal Suspension" "Sport Suspension"|-||-|"Special Handling fee" "add((+$15)"|-||-|||-||NAZ5-33-99ZA|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Front Caliper With Normal Suspension 2001-2005|,|NAZ5-33-99ZA|,|271.83|,|229.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Front Caliper With Normal Suspension 2001-2005
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side add(+$149)"|-||-|||-||GEMAMIOEMFRC|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Front Catalytic Converter 1999-2000|,|BP4Y-20-500C|,|793.85|,|674.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Catalytic Converter 1999-2000
Please state your VIN number on the first page of check out in the section.
CALIFORNIA
|,|"Select Year" "1999" "2000"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-CONTROL-ARM-BUSHINGS-1990-1997-FACTORY-PK34460|,|19MAMISUANDS11|,|Genuine Mazda Miata OEM Front Control Arm Bushings 1990-2005|,|OEM-PK34460|,|412.08|,|284.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Control Arm Bushings 1990-1997
Includes all 8 upper and lower front control arm bushings.
NA01-34-460A(2), NA01-34-490(2), NA01-34-480A(4) - NA / NC10-34-480(4) - NB
|,|"Select Year" "Select Here" "1990-1997 add(+$75)" "1999-2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-CRANKSHAFT-OIL-SEAL-1991-2005|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Front Crankshaft Oil Seal 1991-2005|,|OEM-B3C7-10-602A|,|10.23|,|8.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Crankshaft Oil Seal 1991-2005
For Mazda MX-5 Miata Years 1991-2005 Miata - (1991 From VIN 209447)
|,|||-||BP58-40-500B|,|19MAMIEXHECO|,|Genuine Mazda Miata OEM Front Exhaust Pipe 1990-2005|,|BP58-40-500B|,|444.83|,|362.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Front Exhaust Pipe 1990-2005
#2 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Year" "Select Here" "1990-1993 add(+$45)" "1994-1997 add(+$105)" "1999-2005"|-||-|"Shipping Cost" "add(+$89)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-LOWER-BALL-JOINT|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Front Lower Ball Joint|,|NA01-34-550B|,|109.24|,|87.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Lower Ball Joint
Genuine Mazda Miata Front Lower Ball Joint(fits left or right side front)
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENMAZFRONOR|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Front Mud Guard Set 1990-1997|,|909-720|,|95.95|,|79.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Mud Guard Set 1990-1997
Genuine Mazda Miata Front Mud Guard Set. Easy installation. Just bolt on ... no drilling.This Kit contains both right and left front mud guards and the hardware needed to install them.Protect your paint from rocks and other road debris.
|,|||-||GEMAMIOEMFRO|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Front Oxygen(o2) Sensor 1999-2000|,|OEM-BP4X-18-861A-9U|,|177.95|,|149.95|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Front Oxygen (o2) Sensor
Stock Replacement
|,|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-PAD-BACKING-PLATE-SHIM-KIT|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Front Pad Backing Plate Shim Kit|,|NAY0-33-29Z|,|19.95|,|17.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Pad Backing Plate Shim Kit
Genuine Mazda Miata Front Pad Backing Plate Shim Kit. This kit contains the backing plates that go behind the front pads and the clips that go on the ends of the front pads.
|,|"Select Year" "1990" "1991" "1992" "1993"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-PADS|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Front Pads 2006-2015|,|NFY7-33-28ZD|,|156.98|,|128.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Pads
Genuine Mazda Miata Front Pads
|,|"Year" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||GEOEMMAFRPUS|,|MAPA191|,|Genuine Mazda Miata OEM Front Pump Seal 1994-1997|,|OEM-0338-19-223A|,|12.02|,|11.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Pump Seal 1994-1997
*VIN# Required
|,|||-||OEM-FRONT-ROTORS-NC|,|20MAMIBRRORO|,|Genuine Mazda Miata OEM Front Rotors 2006-2015|,|OEM-N12Y-33-25XA|,|119.95|,|97.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Rotors 2006-2015
*Priced per side
|,|"Special Handling fee" "add(+$15)"|-||-|||-||MAZDA-MIATA-FRONT-STRIKER-BOLT-SCREW-TORX-HEAD-8MMX|,|SOFT-TOP|,|Genuine Mazda Miata OEM Front Soft Top Striker Bolt (Screw Torx Head 8mmx)|,|OEM-9944-10-820B|,|4.12|,|2.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Soft Top Striker Bolt (Screw Torx Head 8mmx)
Star shaped bolts
Attaches striker to front windshield header.
For Mazda Miata Year: 1990-2005
These Bolts are priced per bolt.
If you need all 4, please change the qty. to 4 during your check out.
Image may not represent this exact part
|,|||-||GEMAMIOEMFRS|,|MAPA191|,|Genuine Mazda Miata OEM Front Steering Linkage / Gear - Power Steering Rack (Manual) 1990-1997|,|OEM-NA01-32-110|,|699.95|,|569.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Steering Linkage / Gear - Power Steering Rack
#1 shown in diagram.
For Manual Steering
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||GEMAMIOEMFRS1|,|MAPA191|,|Genuine Mazda Miata OEM Front Steering Linkage / Gear - Power Steering Rack (Power) 1990-1997|,|OEM-NA02-32-110|,|899.99|,|679.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Front Steering Linkage / Gear - Power Steering Rack - Remanufactured per Mazda
#1 shown in diagram.
For Power Steering
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
Remanufactured per Mazda, Non-returnable, Non-refundable, Final Sale
|,|||-||MAZDA-MIATA-OEM-FRONT-TRANSMISSION-GASKET|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Front Transmission Gasket|,|FE50-16-225A|,|4.94|,|4.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Transmission Gasket
Mazda Miata Front Transmission Gasket. This is the paper gasket that goes behind the Front transmission cover inside the bell housing that covers up the front trans seal.
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-TRANSMISSION-SEAL|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Front Transmission Seal|,|H501-17-103|,|6.47|,|5.25|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Transmission Seal
Mazda Miata Front Transmission Seal
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-WHEEL-HUB-W-O-ABS|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Front Wheel Hub W/O ABS|,|NA01-33-04XA|,|349.73|,|282.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Wheel Hub W/O ABS
Genuine Mazda Miata Front Wheel Hub W/O ABS. This part contains the Front Wheel Bearing and the Seal. Also included are the wheel studs.
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-WHEEL-HUB-WITH-ABS|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Front Wheel Hub with ABS|,|NA23-33-04XA|,|248.71|,|211.40|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Front Wheel Hub with ABS
Genuine Mazda Miata Front Wheel Hub with ABS. For Miatas with Anti Lock Brakes.
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||BP4W-13-480|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Fuel Filter 1999-2005|,|BP4W-13-480|,|62.83|,|53.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Fuel Filter 1999-2005
|,|||-||GEMAMIOEMFUF1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Fuel Filter 2006-2015|,|LFB6-13-ZE1|,|32.09|,|26.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Fuel Filter
Don't ingore this important maintenance item! A clean fuel filter is important to get proper fuel delivery to your Miata's engine. You should replace your fuel filter every 30,000 miles.
This fuel filter fits inside of the gas tank for these years.
|,|||-||NA75-42-110|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM FUEL GAS TANK 1990-1993, 1999-2005|,|NA01-42-110C|,|624.39|,|492.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM FUEL GAS TANK 1990-1993, 1999-2005
|,|"Select Year" "Select Here" "1990-1993" "1999-2002 add(+$80)" "2003-2005 add(+$70)"|-||-|"Shipping & Handing" "add(+$129)"|-||-|||-||GEMAMIFUPUAS2|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Fuel Pump Assembly 1999-2005|,|BP4W-13-35ZG|,|562.72|,|449.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Fuel Pump Assembly 1999-2005
Comes with the fuel pump, mounting bracket, and fuel pressure regulator.
*Non-Turbo Models only
|,|||-||GEMAMIFUHEAS|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Full Headlamp Assembly 1999-2000|,|903-407|,|633.82|,|509.02|,||,||,|0.000 |,||,||,||,| enuine Mazda Miata OEM Full Headlamp Assembly for the years 1999- 2000
|,|Select "Driver Side" "Passenger Side"|-||-|"Special Handling Fee" "add (+$25)"|-||-|||-||GEOEMMAGASPE|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Gas Pedal Assembly 1990-1994|,|OEM-LC62-41-600C|,|36.99|,|31.99|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Gas Pedal Assembly 1990-1994
*Includes gas pedal pad.
|,|||-||GENUINE-MAZDA-MIATA-OEM-GASKET-IDLE-AIR-VALVE--B551-13-W89-|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM GASKET, IDLE AIR VALVE 1990-1993|,|B551-13-W89|,|14.99|,|11.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM GASKET, IDLE AIR VALVE (B551-13-W89)
B551-13-W89
For Mazda MX-5 Miata Years: 1990, 1991, 1992, and 1993
|,|||-||OEM-HARDTOP-LATCHES-03-05|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1990-1997|,|Genuine Mazda Miata OEM Hard Top Front Latch 2003-2005|,|ND30-R1-320|,|305.20|,|229.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Hard Top Front Latch 2003-2005
If your latches are worn out, these Genuine Mazda replacements are what your Miata needs.
* Price is for one side only, please make sure you select the side or sides you need under the "Select Side" options. Your selecitons are driver side, passenger side, or both driver and passenger side.
Hard Top Latch Fits:
2003-2005 Miata - Front Location
(From 11/01/2002 Production)
|,|"Select Side" "Driver Side" "Passenger Side" "Both Driver & Passenger Side add(+$229.02)"|-||-|||-||HARTOPSIDLAT|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1999-2005|,|Genuine Mazda Miata OEM Hard Top Side Striker Plate 1990-2005|,|OEM-NA02-R1-361D|,|65.99|,|49.95|,||,||,|0.000 |,||,|agad|,||,|Genuine Mazda Miata OEM Hard Top Side Striker Plate 1990-2005
These are the Genuine Mazda Miata 1990-2002 OEM Side Striker Plates that connect behind each seat to secure your hardtop.
* Price is for one side only, please make sure you select the side or sides you need under the "Select Side" options. Your selecitons are driver side, passenger side, or both driver and passenger side.
* Does not include hardware.
|,|"Select Side" "Driver" "Passenger" "BOTH Driver & Passenger Side add(+$49.95)"|-||-|||-||NA01-R1-882|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1999-2005|,|Genuine Mazda Miata OEM Hard-Top Side Weatherstrip Retainer 1990-2002|,|NA01-R1-882|,|122.31|,|102.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Hard-Top Side Weatherstrip Retainer 1990-2002
#8 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||NE52-R1-6B1|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Genuine Mazda Miata OEM Hardtop Roof Motor Bracket 2007-2015|,|NE52-R1-6B1|,|84.55|,|68.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Hardtop Roof Motor Bracket 2007-2015
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$68.02)"|-||-|||-||OEM-NA-HAZARD-SWITCH|,|INSETE|,|Genuine Mazda Miata OEM Hazard Headlight Switch 1990-1997|,|NA01-66-170|,|273.11|,|196.59|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Hazard Headlight Switch 1990-1997
Brand New From Mazda
|,|||-||GEMAMIHEHIAS|,|19992005|,|Genuine Mazda Miata OEM Headlamp Hinge Assy|,|909-113|,|125.99|,|113.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OME Headlamp Hinge Assy.
Fits the 1990-1997 Miata.
|,|"Side" "Driver" "Passenger"|-||-|||-||GEMAMIHEHOAN|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Headlamp Housing and Lense 2001- 2005|,|903-410|,|882.98|,|729.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Headlamp Housing and Lense for years 2001- 2005
|,|Select "Driver Side" "Passenger Side"|-||-|"Special Handling Fee" "add (+$25)"|-||-|||-||GEMAMIHELIBL|,|NAEXLI|,|Genuine Mazda Miata OEM Headlamp Lid, Black 1990-1997|,|909-115|,|94.41|,|77.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Headlamp Lid, Black 1990-1997
Color: Black
Reference #10 in illustration
Fits the 1990-1997 Mazda Miata.
|,|"Select Side" "Select Here" "Driver" "Passenger" "Both Side add(+$77.02)"|-||-|||-||HEREPRRIHASI|,|19901997|,|Genuine Mazda Miata OEM Headlamp Reactor Protectors, Right Hand Side|,|909-HRP|,|16.99|,|16.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Headlamp Reactor Protectors, Right Hand Side
For the 1990-1997 Miata. Part # 51-SE1.
|,|"Please Select" "No Fasteners" "Fasteners add(+$10.95)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-HEATER-BLOWER-MOTOR-1990-1997|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Heater Blower Motor 1995-2005|,|BR70-61-B10|,|455.64|,|365.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Heater Blower Motor 1995-2005
Blower Motor Fits: Mazda Miata Years 1995-2005
|,|||-||GEMAMIHECO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Heater Core 1994-2005|,|909-565|,|604.95|,|474.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Heater Core
For Mazda Miata Year: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, and 2005
|,|"Select Year" "1994-1997" "1999-2000 add(+$40)" "2001-2005 add(+$40)"|-||-|||-||NC10-61-211|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Heater Hose Kit 1999-2005|,|NC10-61-211-212|,|50.85|,|39.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Heater Hose Kit 1999-2005
TWO OEM Heater Hoses
|,|||-||MIHORECA|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Hood Release Cable|,|903-510|,|44.53|,|38.45|,||,||,|0.000 |,||,|ceraf|,||,|Genuine Mazda Miata OEM Hood Release Cable
|,|"Select Year" "90-97" "99-05"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-IGNITION-COIL--2006-2013--EACH-2-3L---2009-2013-MAZDA-6-2-5L|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Ignition Coil (2006-2013) Each 2.3L & 2009-2013 Mazda 6 2.5L|,|L3G2-18-100B-9U|,|146.23|,|119.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Coil (2006-2013) Each 2.3L & 2009-2013 Mazda 6 2.5L
Mazda Ignition Coil (2006-2013) Each 2.3L & 2009-2013 Mazda 6 2.5L. Your Mazda 2.3L have a missfire? Check the plugs and ignition coils.
|,|"Select Year" "2006-2012"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-IGNITION-COIL--EACH--01-05|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Ignition Coil (each) 2001-2005|,|BP6D-18-100A-9U|,|239.89|,|124.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Coil (each) 01-05
Genuine Mazda Miata Ignition Coil (each)going bad? Replace the with a new factory Mazda genuine Miata ignition coil.
|,|"Select Year" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GEMAMIIGCO19|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Ignition Coil 1990-1991|,|907-COIL1|,|419.53|,|362.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Coil 1990-1991
Fits: 1990-1991 (Thru 08/01/01) Production.
Part # B61P-18-10XD
To V.I.N. 235561
|,|||-||GEMAMIIGCO191|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Ignition Coil 1992-1993|,|907-COIL2|,|419.53|,|342.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Coil 1992-1993
Fits: 1992 (after 08/01/91 Production) - 1993.
From V.I.N. 235561
|,|||-||GEMAMIIGCO192|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Ignition Coil 1994-1995|,|907-COIL3|,|553.89|,|462.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Coil 1994-1995
BPE8-18-10XA
NOTE: Miata's produced from 1994 thru 04/02/95 (To VIN 619601)
|,|||-||GEMAMIIGCO193|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Ignition Coil 1996-1997|,|907-COIL4|,|363.95|,|289.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Coil 1996-1997
BPE8-18-10XC
NOTE: Miata's produced from 04/03/95 thru 1997. (From VIN 619601)
|,|||-||GEMAMIIGCO194|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Ignition Coil 1999-2000|,|907-COIL5|,|512.20|,|392.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Coil 1999-2000
Part # BP4W-18-10XB
|,|||-||GEMAMIIGCO20|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Ignition Coil 2001-2005|,|907-COIL6|,|239.89|,|122.05|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Coil for years 2001-2005
|,|||-||GENUINE-MAZDA-MIATA-OEM-IGNITION-KEY-SET-|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Ignition Key Set 1990-1993|,|OEM-NA01-76-290F|,|343.02|,|269.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ignition Key Set 1990-1993
This Ignition Key set includes:
* Housing with cylinder
* Electrical switch
* Mount Bolt
* Key
|,|||-||MAZDA-MIATA-IGNITION-SWITCH|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Ignition Switch 1999-2005|,|N053-66-151|,|58.76|,|47.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Ignition Switch 1999-2005
|,|||-||N067-54-971A|,|NEW|,|Genuine Mazda Miata OEM Inner CENTER Rocker Panel 1999-2005|,|N067-54-971A|,|159.58|,|125.45|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Inner Rocker Panel 1999-2005
#12 in Illustration
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||GEMAMIOEMINH|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Inner Header Gasket 1990-1993|,|921-403|,|20.67|,|16.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Inner Header Gasket
This inner gasket is required for correct fitment of a header or exhaust manifold on the 1990-93 (1600cc) Miata. Both an outer gasket and inner gasket are required. (Outer gasket = 1 layer, Inner gasket = 3 layers) These gaskets can be used as replacements for use with the stock exhaust manifold.
For Mazda Miata Years: 1990, 1991, 1992, and 1993
|,|||-||GENUINE-MAZDA-MIATA-OEM-INTAKE-GASKET|,|MAPA19|,|Genuine Mazda Miata OEM Intake Gasket|,|B61P-13-111|,|11.34|,|10.85|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Intake Gasket
Mazda Miata Intake Gasket
|,|"Select Year" "1990-1993" "1994-1997 (BP0513111)"|-||-|||-||GEMAMIINFUBO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Interior Fuse Box for the Windshield Wiper 1990-1992|,|909-600|,|199.99|,|192.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Interior Fuse Box for the Windshield Wiper for 1990-1992.
|,|||-||GENUINE-MAZDA-MIATA-OEM-INTERIOR-LIGHTING-KIT|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda Miata OEM Interior Lighting Kit 2010-2015|,|NH18-V7-050|,|203.95|,|178.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Interior Lighting Kit 2010-2015
Genuine Mazda Miata Interior Lighting Kit.Enhance your passenger and driver side footwells with these specially designed night lights.
|,|||-||NA8W-V7-050|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda Miata OEM Interior Lighting Kit 2016-2019+|,|NA8W-V7-050A|,|490.19|,|396.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Interior Lighting Kit 2016-2019+
Genuine Mazda Original Parts
|,|||-||NB38-51-311A|,|NBINAC1|,|Genuine Mazda Miata OEM Interior Mirror Light Lens 1999-2005|,|NB38-51-311A|,|12.79|,|7.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Interior Mirror Light Lens 1999-2005
|,|||-||NB38-51-310C|,|NBINAC1|,|Genuine Mazda Miata OEM Interior Overhead Lamp 1999-2005|,|NB38-51-310C|,|31.90|,|24.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Interior Overhead Lamp 1999-2005
|,|||-||KD33-69-220B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Interior Windshield Rear View Mirror with Auto Dimming 2014-2018|,|KD33-69-220B|,|372.09|,|302.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Interior Windshield Rear View Mirror 2014-2018
Description: Day/night, Auto. with garage opener. With auto dimming, with garage opener.
Manufacturer: Genuine Mazda Original Parts
NOTE: Picture shown is for illustration purpose only. Actual product may vary.
|,|||-||GENUINE-MAZDA-MIATA-OEM-IPOD-INTEGRATION-MODULE|,|20MAMIINAU|,|Genuine Mazda Miata OEM iPod Integration Module|,|C9F_V9029-BBM279CFZ|,|341.90|,|295.84|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM iPod Integration Module
Genuine Mazda Miata iPod Integration Module.Taking your Apple® iPod along for the ride just became a lot easier. Mazda’s iPod Integration Module allows you to play your iPod through your Mazda's audio system with crystal-clear sound and a built-in battery charger. Works with all 30-pin, dock conn.iPod not included.
|,|"Year" "2009" "2010" "2011" "2012" "2013"|-||-|||-||GEMAREJA|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Jack Assembly|,|912-141|,|225.99|,|159.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Jack Assembly
Unless you're pumping serious iron, you'll need one of these to lift your Miata.
2006-2015
LD47-69-671 - Wrench Hub
N243-R1-342-02 - Hook Lever
B001-56-170C - Jack Retainer Screw
N077-37-790B - Jack
2016-2021
LD47-69-671 - Wrench Hub
LD47-37-770 - Jack Lever
B001-56-170C - Jack Retainer Screw
N077-37-790B - Jack
We don't need those 'round here.
|,|"Select Year" "2006-2015" "2016-2022"|-||-|||-||906-380-906-370|,|NABOOTS|,|Genuine Mazda Miata OEM Large & Small Rubber Shift Boot Combo 1990-2005|,|906-380-906-370|,|109.95|,|82.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Large & Small Rubber Shift Boot Combo 1990-2005
The Large and small rubber shift boot that sits under the center console, and the small rubber shift boot that sits at the base of the shift lever.
|,|"Do you want to add Bushing kit?: " "No" "Yes add(+$49)"|-||-|"Select Year" "Select Here" "1990-1993 (upto VIN# 413071)" "1994-2005 (from VIN# 413072) add(+$20)"|-||-|||-||LARUSHBO90|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Large Rubber Shift Boot 1990-2005|,|906-380|,|46.00|,|34.90|,||,||,|0.000 |,||,|sdgsfd|,||,|Genuine Mazda Miata OEM Large Rubber Shift Boot 1990-2005
This is the large rubber shift boot that sits under the center console.
|,|||-||GENUINE-MAZDA-MIATA-OEM-LED-INTERIOR-LIGHT-BULB-2016|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda Miata OEM LED Interior Light Bulb 2006-2020+|,|C901-V7-165|,|39.95|,|35.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM LED Interior Light Bulb 2016-2020+
Mazda LED Interior Light Bulb. Replace your interior light bulb with an LED interior light bulb for better light.
|,|||-||GEMAMILIPLHO|,|19992005|,|Genuine Mazda Miata OEM License Plate Holder 1990-1997|,|50-180A|,|39.99|,|32.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM License Plate Holder 1990-1997
|,|||-||GEMALIPLHO|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM License Plate Holder 1999-2005|,|NA01-50-180A|,|38.49|,|32.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM License Plate Holder 1999-2005
|,|||-||GEMAMILIPLPR|,|19992005|,|Genuine Mazda Miata OEM License Plate Protector 1990-1997|,|FB01-50-144|,|19.99|,|17.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM License Plate protector 1990-1997.
In center of picture.
|,|||-||GEMALIPLPR|,|19992005|,|Genuine Mazda Miata OEM License Plate Protector 1999-2005|,|OEM-FB01-50-144|,|29.59|,|24.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM License Plate protector. In center of picture.
Reference #15 in illustration
|,|||-||B61P-11-500A|,|19MAMIDRVIAL|,|Genuine Mazda Miata OEM Light Weight Flywheel 1990-1997|,|B61P-11-500A|,|446.98|,|369.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Light Weight Flywheel 1990-1993
Other Names: Wheel Fly
SKU: 90-93:B61P-11-500A, 94-96: BPE8-11-500
|,|"Select Year" "Select Here" "1990-1993" "1994-1996 add(+$104)"|-||-|||-||GEMAMILIWEFL|,|MIREPA|,|Genuine Mazda Miata OEM Light Weight Flywheel 1999-2005|,|909-016|,|592.00|,|470.00|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Light Weight Flywheel (1999-2005)
MX-5 MIATA and MAZDASPEED MX-5 MIATA (non-turbo). 6.2Kg for reduced rotation inertia. This improves engine response for better acceleration.
|,|||-||GEMAMILONUT|,|19901997|,|Genuine Mazda Miata OEM Lock Nut|,|9994-00-603B|,|3.99|,|2.55|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Lock Nut.
Price is for a single nut. Two required.
|,|||-||GEOEMLOBAJOA|,|19MAMISUANDS5|,|Genuine Mazda Miata OEM Lower Ball Joint Assembly 1990-1997|,|OEM-NA01-34-550B|,|109.24|,|87.98|,||,||,|0.000 |,||,||,||,|Genuine OEM Lower Ball Joint Assembly 1990-1997
*#21 in the diagram shown.
|,|||-||NE51-34-300D|,|20MAMISUANDS2|,|Genuine Mazda Miata OEM Lower Control Arm 2006-2015|,|NE51-34-300D|,|272.04|,|213.05|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Lower Control Arm 2006-2015
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||PEJ5-13-460|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Manifold Header Gasket 2016-2020+|,|PEJ5-13-460|,|31.64|,|24.09|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Manifold Header Gasket 2016-2020+
|,|||-||GEMAMIOEM19M|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Manual Antenna Base 1999-2005|,|OEM-NC20-66-930A|,|107.98|,|79.99|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Manual Antenna Base 1999-2005
VIN# required to order*
|,|||-||GEMAMIOEMMAF1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM MAZDASPEED Fuel Pump 2004-2005|,|OEM-BP8J-13-350|,|452.32|,|370.00|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM MAZDASPEED Fuel Pump 2004-2005
*Turbo Models Only
*Fuel Pump only
|,|||-||GEMAMIOEMMAF|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM MAZDASPEED Fuel Pump Assembly 2004-2005|,|OEM-BP8J-13-35Z|,|555.28|,|450.00|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM MAZDASPEED Fuel Pump Assembly 2004-2005
DISCONTINUED
*Turbo Models only.
|,|||-||GEMAMIOEMMAK|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM MazdaSpeed Keychain|,|OEM-9999-91-U408|,|19.99|,|10.90|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM MazdaSpeed Keychain
2" Die cut metal plated key tag.
|,|||-||MAREEMKIT|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM MAZDASPEED Rear Emblem Kit|,|907-750|,|59.99|,|45.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM MAZDASPEED Rear Emblem Kit. Comes with a MX-5 emblem and a MAZDASPEED emblem. Comes in a set and ready to stick on.
|,|||-||GENUINE-MAZDA-MIATA-OEM-MAZDASPEED-WHEEL-CENTER-CAP-2004|,|MAOEMWHAC|,|Genuine Mazda Miata OEM Mazdaspeed Wheel Center Cap 2004|,|NE45-37-190|,|42.91|,|37.70|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Mazdaspeed Wheel Center Cap 2004
Center Cap For 2004 Mazdaspeed Miata.
VIN Required During Check Out.
|,|||-||MAMICOTE|,|MIATA-OEM-INTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Mirror Compass & Temperature (1999-2005)|,|907-710|,|249.99|,|199.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Mirror Compass & Temperature Auto-Dimming Mirror.
Automatically dims to reduce glare from headlights of cars behind you. Bright LED readout with compass and outside temperature. Replaces interior rearview mirror.
Fits years 1999-2005. Comes in one color, black.
|,|"Mazda Installation Kit" "No, I don't need help" "Yes, I want the install kit add(+$39.99)"|-||-|||-||NA52-66-600A|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Mirror Switch 1990-1997|,|NA52-66-600A|,|115.05|,|85.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Mirror Switch 1990-1997
|,|||-||GEMAMIMOENMO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Motor Engine Mount 1999-2005|,|921-911|,|79.99|,|59.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Motor OEM Mount are priced for each Motor Engine Mount.
These Engine Mount Fits for the year 1999-2005 Miata's and 2004-2005 Non Turbo Miata's.
|,|||-||GEMAMIMOENMO1|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Genuine Mazda Miata OEM Motor Engine Mount Mazdaspeed 1990-2005|,|921-112|,|79.94|,|61.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Motor Engine Mount Mazdaspeed for the years 1990-2005
If you need Qty. 2, please change the quantity to 2 from the shopping cart.
|,|||-||BP55-40-100D|,|19MAMIEXSYMU|,|Genuine Mazda Miata OEM Muffler 1990-1997|,|BP55-40-100D|,|447.85|,|364.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Muffler 1990-1997
#5 in Illustration
|,|"Select Year" "Select Here" "1990-1995" "1996-1997"|-||-|"Select Transmission" "Select Here" "Manual Transmission add(+$95)" "Automatic Transmission"|-||-|"Shipping Cost" "add(+$165)"|-||-|||-||OEM-NC-WHEELS-BLK-DIAMCUT|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM MX-5 17" Black Diamond Cut Alloy Wheel 2006-2015 (each)|,|OEM-NH52-V3-810-SB|,|309.95|,|265.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM MX-5 17" Black Diamond Cut Alloy Wheel 2006-2015 (each)
17x7 Black Diamond Cut Alloy Wheel
Price is for Each
Ideal for the NC Miata Years 2006-2015
|,|"Do you want Center Cap?" "Select Here" "Yes add(+$21)"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-MX-5-17--DARK-GUNMETAL-ALLOY-WHEEL--EACH--|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM MX-5 17" Dark Gunmetal Alloy Wheel (each) |,|9965-69-7070|,|369.95|,|319.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM MX-5 17" Dark Gunmetal Alloy Wheel (each)
Genuine Mazda MX-5 17" Dark Gunmetal Alloy Wheel (each) Get the look of the Club Trim MX-5 model with these Dark Gunmetal Alloy 17" wheels.Does not include center caps or lugnuts.This wheel is the same design as the Club Miata but a LIGHTER color.
|,|"Year" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-LICENSE-PLATE-FRAME-2016|,|MIGIMOVIALL|,|Genuine Mazda Miata OEM MX-5 License Plate Frame|,|0000-83-D12|,|39.95|,|34.63|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM MX-5 License Plate Frame
Genuine Mazda Miata License Plate Frame. Add this nice accent tag frame to your Mazda Miata. Another great accessory from Mazda.These high quality stainless steel License Plate Frames are now available with highly detailed brushed finish. Universal fit and easy mounting application include complementing hardware hider caps to complete the look of the vehicle.
|,|||-||MAMIWISU|,|INSETE|,|Genuine Mazda Miata OEM MX-5 Windshield Sunscreen 2006-2014|,|818-510|,|79.99|,|62.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM MX-5 Windshield Sunscreen
Mazda Miata Windshield Sunscreen. Help keep your Mazda Miata MX-5 interior cool while parked. Silver reflective material. Includes the MX-5 logo.
Available Years: 2006-2012
|,|||-||MANAWOSHKN|,||,|Genuine Mazda Miata OEM Nardi Wood Shift Knob 2001-2005|,|907-405|,|119.99|,|99.95|,||,||,|0.000 |,||,|;sjdfh|,||,|Genuine Mazda Miata OEM Nardi Wood Shift Knobs for 6 Speed.
* SORRY this Genuine Mazda Miata OEM Nardi Wood Shift Knob is DISCONTINUED by Mazda.
Please click on "You May Also Like" for similar parts. *
|,|||-||NGKSPARGPLUG|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM NGK Spark Plug 1990-2015|,|901-100|,|5.99|,|4.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM NGK Spark Plug 1990-2015
These are the plugs your Miata was designed to work best with. We have these in our factory Miata and they work flawlessly.
Make sure you update the quantity in your cart to 4 if you need 4.
|,|"Select Year" "Select Here" 1990-1992 1993-2005 "2006-2015 add(+$18)"|-||-|||-||GEMAMINGKSPP|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM NGK Spark Plug Wire Set 2001-2005|,|901-124|,|139.99|,|101.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM NGK Spark Plug Wire Set
Comes with TWO spark plug wires and boots.
For Mazda MX-5 Miata Years: 2001, 2002, 2003 and 2004
|,|||-||MAZDA-MX-5-MIATA-O2-SENSOR-1990-1993-1-6|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM O2 Sensor 1990 - 1993 1.6|,|B61R-18-861A-9U|,|196.44|,|169.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM O2 Sensor 1990 - 1993 1.6
Replacement Oxygen Sensor for 1990-1993 Mazda MX-5 Miatas.
Direct fit connector.
1990-1993 1.6 Front [Non-California]
Single Wire
|,|||-||OILCAPGASKET|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Oil Cap Gasket 1990-1997|,|903-240|,|5.92|,|4.82|,||,||,|0.000 |,||,|vbthst|,||,|Genuine Mazda Miata Oil OEM Cap Gasket for years 1990-1997
|,|||-||BPE8-14-700|,|NEW|,|Genuine Mazda Miata OEM Oil Cooler 1999-2005|,|BPE8-14-700|,|492.34|,|398.45|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Oil Cooler 1999-2005
|,|||-||BPE8-10-450----------|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Oil Dipstick 1994-1997|,|BPE8-10-450|,|32.95|,|26.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Oil Dipstick 1990-2005
|,|||-||BP4W-10-450|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Oil Dipstick 1999-2005|,|BP4W-10-450|,|36.95|,|28.99|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Oil Dipstick 1999-2005
|,|||-||GENUINE-MAZDA-MIATA-OEM-OIL-DRAIN-PLUG-WITH-WASHER|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Oil Drain Plug with Washer 2006-2017|,|LFE5-10-404-9956-41-400|,|13.35|,|8.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Oil Drain Plug with Washer 2006-2017
Genuine Mazda Oil Drain Plug with Washer head stripped out or just leaking? Replace with a new Genuine Mazda Oil drain Plug with a new washer also.
|,|||-||BPY0-10-400D|,|NEW|,|Genuine Mazda Miata OEM Oil Pan 1994-2005|,|BPY0-10-400D|,|388.75|,|295.45|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Oil Pan 1994-2005
#29 in Illustration
|,|"Select Year" "Select Here" "1994-2000" "2001-2005 add(+$20)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-OIL-PAN-DRAIN-PLUG-WASHER--SMALL-|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Oil Pan Drain Plug Washer (Small)|,|9956-41-400|,|1.12|,|0.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Oil Pan Drain Plug Washer (Small)
Genuine Mazda Oil Pan Drain Plug Washer (Small)
|,|"Select Year" "1999-2012"|-||-|||-||GEMAMIOEMOIL1|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Oil Pan Seal 1990-2000|,|OEM-B6F4-10-427|,|27.40|,|21.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Oil Pan Seal 1990-2000
VIN# Required*
# 10-427 on the Picture
|,|"Select Side" "Select Here" "Front" "Rear" "Both add(+$19.98)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-OIL-PAN-SEALER|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM OIL PAN SEALER (RTV SILICONE SEALANT)|,|OEM-0000-77-1217-ES|,|16.36|,|13.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM OIL PAN SEALER (RTV SILICONE SEALANT)
Genuine Mazda Miata OEM High Performance RTV Silicone Gasket Maker for sealing against oil and coolant leaks. Outperforms conventional sealants in critical applications. Performs well at low & high temperatures
|,|||-||B61P-18-501|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Oil Pressure Sending Unit 1990-1994|,|B61P-18-501|,|273.01|,|228.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Oil Pressure Sending Unit 1990-1994
|,|||-||B367-18-501B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Oil Pressure Sending Unit 1995-2005|,|B367-18-501B|,|36.67|,|26.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Oil Pressure Sending Unit 1995-2005
|,|||-||GEMAMIOEMOIL|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Oil Pump 1990-1993|,|OEM-B661-14-100|,|444.29|,|356.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Oil Pump 1990-1993
Part can be found as reference #32 in illustration
VIN# Required*
|,|||-||BP4W-14-100A|,|NEW|,|Genuine Mazda Miata OEM Oil Pump 1999-2005|,|BP4W-14-100A|,|208.95|,|162.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Oil Pump 1999-2005
#21 in Illustration
|,|"Select Year" "Select Here" "1999-2000" "2001-2005 add(+$85)"|-||-|||-||GEMAMIORFRT|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Ornament - FRT|,|907-759|,|39.99|,|29.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ornament - FRT
|,|||-||NC10-70-270D|,|NEW|,|Genuine Mazda Miata OEM Outer Rocker Panel 1999-2005|,|NC10-70-270D|,|260.76|,|206.45|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Outer Rocker Panel 1999-2005
#10 in Illustration
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-OUTER-TIE-ROD-END|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Outer Tie Rod End|,|32-280-992213020-999241201|,|96.05|,|79.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Outer Tie Rod End
Mazda Miata Outer Tie Rod End.Please state last 8 of your VIN at checkout. The "R" package cars are different.
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||EA01-59-410F-XX|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Outside Door Handle 1999-2005|,|EA01-59-410F-XX|,|244.99|,|196.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Outside Door Handle 1999-2005
#1 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|"Select Color" "Select Here" "RED (SU)" "BLACK (PZ)" "GREEN (47)"|-||-|||-||GEMAMIOEMOWM|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Owner's Manual 2010-2016|,|901-340|,|179.99|,|179.99|,||,||,|0.000 |,||,||,||,|Lost your Mazda Miata Owner's Manual? We have the Genuine Mazda Miata OEM
Owner's Manual for the years 2010-2016!
|,|"Select Year" "Select Here" "2010" "2011" "2012" "2013" "2014"
"2015" "2016"|-||-|||-||GENUINEMAZDA|,||,|GENUINE MAZDA MIATA OEM PARTS|,||,||,||,||,||,||,||,||,||,||,|||-||NA75-33-980R-TB|,|19MAMIBRROVI|,|Genuine Mazda Miata OEM Passenger Side Front Caliper with Normal Suspension 1994-2002|,|NA75-33-980R-TB|,|109.52|,|76.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Passenger Side Front Caliper with Normal Suspension 1994-2002
|,|"Drop Shipping & Handing" "add(+$35)"|-||-|||-||GENUINE-MAZDA-MIATA-PASSENGER-SIDE-POWER-MIRROR|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Passenger Side Power Mirror 1990-1997|,|NA52-69-120C-XX|,|364.43|,|312.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Passenger Side Power Mirror 1990-1997
Genuine Mazda Miata Passenger side power mirror.Mazda Miata Passenger Side Electric Mirror. Painted and ready to install. Limited availability on certain colors.
PT - Chaste White
SU - Classic Red
A5 - Satellite Blue
PZ - Brilliant Black
|,|"Color" "Select Here" "Chaste White" "Classic Red" "Satellite Blue" "Brilliant Black"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-PASSENGER-SIDE-REPLACEMENT-FOGLAMP|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda Miata OEM Passenger Side Replacement Foglamp 2006-2015|,|LE46-51-680C|,|200.16|,|167.55|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Passenger Side Replacement Foglamp 2006-2015
Genuine Mazda Passenger Side Replacement Foglamp cracked or broke? Replace it with a genuine Mazda Miata factory foglamp.Comes with new sockets and bulbs.
|,|"Select Year" "Select Here" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||N0Z7-26-98ZR-T0|,|19MAMIBRROVI1|,|Genuine Mazda Miata OEM Passenger's Rear Caliper With SPORT SUSPENSION 1999-2005|,|N0Z7-26-98ZR-T0|,|296.95|,|242.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Passenger's Rear Caliper With SPORT SUSPENSION 1999-2005
|,|||-||NA01-26-980R-TA|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Genuine Mazda Miata OEM Passenger's Side Rear Caliper 1990-1993|,|NA01-26-980R-TA|,|285.95|,|242.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Passenger's Side Rear Caliper 1990-1993
Mazda OEM part number NA01-26-980R-TA is a factory original Mazda Miata Base Passenger Side Caliper. This is a genuine Mazda part, the manufacturer's recommended part for your vehicle.
The core charge will be refunded once the old caliper has been returned to us with a copy of the invoice. Returned caliper cores must be complete.
NOTE: * This part only comes remanufactured by Mazda
|,|"Select Year" "Select Here" "1990" "1991" "1992" "1993"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-PASSENGER-S-SIDE-REAR-CALIPER--1994-2000-|,|19MAMIBRRORO1|,|Genuine Mazda Miata OEM Passenger's Side Rear Caliper With Normal Suspension 1994-2005|,|NAZ5-26-98ZR-T0|,|285.95|,|245.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Passenger's Side Rear Caliper With Normal Suspension 1994-2005
Mazda OEM part number NAZ5-26-98ZR-T0 is a factory original Mazda Miata Base Passenger Side Caliper. This is a genuine Mazda part, the manufacturer's recommended part for your vehicle.
The core charge will be refunded once the old caliper has been returned to us with a copy of the invoice. Returned caliper cores must be complete.
NOTE:
* This part only comes remanufactured by Mazda
|,|"Select Year" "Select Here" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||FAPCVVA|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM PCV Valve 1990-1997 & 2001-2005|,|901-275|,|30.45|,|24.98|,||,||,|0.000 |,||,|csegf|,||,|Genuine Mazda Miata OEM PCV Valve for Years 1990-1997 & 2001-2005
1990-1997 & 2001-2005: BP05-13-890
|,|"Select Year" "1990-1997 & 2001-2005"|-||-|||-||GEMAMIOEMPOA1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Power Antenna Assembly 1999-2005|,|OEM-NC72-76-930|,|386.30|,|312.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Power Antenna Assembly 1999-2005
Comes complete with new motor and mast
|,|||-||GEMAMIOEMPOS|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Power Steering Belt With AC - 1990-2005|,|OEM-BPE8-15-909A|,|48.68|,|42.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Power Steering Belt With AC - 1990-2005
Genuine Mazda Miata A/C Belt with Power Steering. Belts need to be checked every 15000 miles. Would hate to be on a trip or going to work and this break
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||MAPOSTBEWOAC|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Power Steering Belt With Out AC - 1990-2005|,|923-440|,|26.34|,|22.02|,||,||,|0.000 |,||,|cewf|,||,|Miata Power Steering Belt With Out AC
For Miata Years 1990-2005
|,|||-||NA02-32-410A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Power Steering Cooler Tube 1990-2005|,|NA02-32-410A|,|166.40|,|124.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Power Steering Cooler Tube 1990-2005
1990-1997: NA02-32-410A
1999-2005: NC10-32-470A
|,|"Select Year" "Select Here" "1990-1997 add(+$25)" "1990-2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-PROPELLER-SHAFT-DRIVE-SHAFT-REAR-MF04-25-100A|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Propeller Shaft (Drive Shaft) Rear|,|OEM-MF04-25-100A|,|910.04|,|736.95|,||,||,|100.000 |,||,||,||,|Genuine Mazda Miata OEM Propeller Shaft (Drive Shaft) Rear
For Mazda Miata Years: 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|||-||NC31-68-520C-00|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1999-2005|,|Genuine Mazda Miata OEM Quarter Trim 1999-2005|,|NC31-68-520C-00|,|145.95|,|129.95|,||,||,||,||,||,||,||,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|"Select Option" "Select Here" "With hardtop with wind deflector" "With hardtop without wind deflector" "Without hardtop without wind deflector" "Without hardtop with wind deflector"|-||-|"Select Color" "Select Here" "Black" "Beige"|-||-|||-||NA-OEM-AUTO-RADIATOR|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Radiator 1990-1997 (Automatic Transmission)|,|OEM-BPE9-15-200|,|498.60|,|402.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Radiator 1990-1997 (Automatic Transmission Only)
*Automatic Transmission Only
-Includes Radiator Cap
|,|||-||MAFARAMTR|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Radiator 1990-2005 (Manual Transmission)|,|BPE8-15-200|,|462.60|,|394.02|,||,||,|15.000 |,||,|vrgagr|,||,|Genuine Mazda Miata Radiator (Manual Transmission) for years 1990-2005. Part #1 in layout.
|,|"Select Year" "1990-1997" "1999-2000" "2001-2005"|-||-|||-||NB1-OEM-AUTO-RADIATOR|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Radiator 1999-2000 (Automatic Transmission)|,|OEM-BP4X-15-200A|,|620.82|,|499.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Radiator 1999-2000 (Automatic Transmission)
*Automatic Transmission Only
-Includes Radiator Cap
|,|||-||NB2-OEM-AUTO-RADIATOR|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Radiator 2001-2005 (Automatic Transmission)|,|OEM-BP6H-15-200|,|403.57|,|319.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Radiator 2001-2005 (Automatic Transmission Only)
*Automatic Transmission Only
-Includes Radiator Cap
|,|||-||NC-OEM-AUTO-RADIATOR|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Radiator 2006-2014 (Automatic Transmission)|,|OEM-LFG1-15-200E|,|446.93|,|359.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Radiator 2006-2014 (Automatic Transmission Only)
*Automatic Transmission Only
|,|||-||BP4W-15-185B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Radiator Hose Kit 1999-2005|,|BP4W-15-185B-186B|,|71.95|,|58.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Radiator Hose Kit 1999-2005
Two OEM Radiator Hoses
|,|||-||GENUINE-MAZDA-MIATA-OEM-RADIATOR-HOSE-KIT|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Radiator Hose Kit 2006-2015|,|LFG1-15-18XC|,|249.76|,|198.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Radiator Hose Kit
Genuine Mazda Miata Radiator Hose Kit. This Miata hose kit includes both upper and lower radiator hose. Please state last 8 of your VIN at check to get correct hoses.Please chech your hoses for leaks every 15,000 miles.
|,|"Select Year" "2006-2008" "2009-2015"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-RADIATOR-SUPPORT-SPLASH-SHIELD-UNDER-COVER-2006-2015|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Radiator Support Splash Shield Under Cover 2006-2015|,|NE51-56-110F|,|153.93|,|114.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Radiator Support Splash Shield Under Cover 2006-2015
The plastic "belly pan" or undertrack beneath your engine isn`t just there for stylish good looks. It`s also there to help air go where it`s supposed to go. And over the years, they get pretty tired looking. There are some aftermarket options out there, but the factory one still does the best job of actually controlling airflow. Factory part, Mazda NE51-56-110F.
Fits all 2006-2015 Mazda Miata MX-5
|,|"Shipping and Handing fee" "add(+$49)"|-||-|||-||N243-56-110D|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Radiator Support Splash Shield Under Cover 2016+|,|N243-56-110D|,|153.74|,|119.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Radiator Support Splash Shield Under Cover 2016+
Fits 2016 and Up MX-5 Without hard top.
|,|"Shipping and Handing fee" "add(+$45)"|-||-|||-||GEMAMIREMO19|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Reactor Motor 1990-1997|,|909-935|,|249.99|,|225.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Reactor Motor for year 1990-1997
|,|Select "Right Head Lamp" "Left Head Lamp"|-||-|||-||GENMAZREARBR|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Rear Brake Pads 1990-1993|,|902-415|,|124.64|,|98.95|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Rear Brake Pads for the years 1990-1993
|,|"Do you need the shim/backing plate and clips?" "No" "Yes add(+$19.95)"|-||-|||-||GEMAREBRPA|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear Brake Pads Kit 2001-2005|,|902-435|,|142.95|,|112.02|,||,||,|0.000 |,||,|cwf|,||,|Genuine Mazda Miata OEM Rear Brake Pads Kit for years 2001-2005
Genuine Mazda Miata Rear Pads (2001-2005). If unsure of suspension please state last 8 of your Vin at checkout.
|,|"Select Suspension" "Select Here" "Normal Suspension (NCY5-26-48ZA)" "Sport Suspension (N0Y9-26-43ZC) add(+$10)"|-||-|||-||GENMAZREARBR1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear Brake Pads Kits 1994-2000|,|902-425|,|132.93|,|104.02|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Rear Brake Pads Kits for years 1994-2000
|,|"Do you need the Hardware and Clips?" "No" "Yes add(+$15.95)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-REAR-BRAKE-PADS-W-CLIPS-90-93|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Rear Brake Pads w/clips 1990-1993|,|NAY9-26-43ZA|,|116.12|,|95.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Brake Pads w/clips 90-93
Genuine Mazda Miata Rear Brake Pads w/clips 90-93.Problems with your Mazda Miata rear brake pads? Replace with this factory part w/clips.
|,|"Select Year" "1990" "1991" "1992" "1993"|-||-|||-||MAZOEMREARBR|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Rear Brake Rotor 1990-1993|,|909-520|,|105.99|,|83.05|,||,||,|0.000 |,||,|asdgfagsd|,||,|Genuine Mazda Miata OEM Rear Brake Rotor for years 1990-1993
|,|"Special Handling fee" "add(+$10)"|-||-|||-||MAZOEMREARBR1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear Brake Rotor 1994-2005|,|902-525|,|110.71|,|89.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Brake Rotor for years 1994-2005
Positions: Left, Right
Other Names: Rotor, Disc Plate
|,|"Select Suspension" "Select Here" "Normal Suspension" "Sport Suspension"|-||-|"Special Handling fee" "add((+$15)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-REAR-BUMPER-REFLECTOR-LEFT-DRIVER-SIDE-2006-2008|,|20MAMIEXLI|,|Genuine Mazda Miata OEM Rear Bumper Reflector Left (Driver Side) 2006-2008|,|NF79-51-5C0B|,|35.98|,|29.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Bumper "Reflector" Left (Driver Side) 2006-2008
#9 IN ILLUSTRATION
Genuine Mazda Miata OEM Rear Bumper "Reflector" Left (Driver Side) 2006-2008
|,|||-||GENUINE-MAZDA-MIATA-OEM-REAR-BUMPER-REFLECTOR-RIGHT-PASSENGER-SIDE-2006-2008|,|20MAMIEXLI|,|Genuine Mazda Miata OEM Rear Bumper Reflector Right (Passenger Side) 2006-2008|,|NF79-51-5B0B|,|36.98|,|29.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Bumper Reflector Right (Passenger Side) 2006-2008
#9 IN ILLUSTRATION
Genuine Mazda Miata OEM Rear Bumper Reflector Right (Passenger Side) 2006-2008
|,|||-||GEMAMICACO192|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear Catalytic Converter 1999-2001 - AT|,|921-206|,|699.99|,|529.95|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Catalytic Converter 1999-2001 - AT
Have a defective catalytic converter? Smells funny? You hear whistling sounds when the throttle is applied? When the car is idling, you hear the sure tell sign of rattling sounds of the catalyst that has broken apart from the converter casing or converter shell?
With a defective or clogged cat you can actually feel the decrease in performance and notice a decrease in fuel economy. Trapped exhaust gas creates back-pressure which prevents your engine to breathe properly. This may cause your engine to quit after a few minutes of driving or make the engine feel like it is starving for fuel.
Due to a number of complaints of the short life-span of cheap aftermarket versions, and recent increased requests begging for the availability of stock OEM Genuine Mazda Miata Catalytic Converters we have put them on the site, here you go!
Note: A common cause for catalytic converter failure is a defective oxygen sensor. When you replace your cat, we highly recommend getting a new oxygen sensor with a brand that states it has an OE, Original Equipment, type connector.
Federal Emissions - Automatic Transmission Only
|,|"Select Year" "1999-2000" "2001 add(+$270.00)"|-||-|||-||GEMAMICACO193|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear Catalytic Converter 1999-2001 - CA - AT|,|921-210|,|649.99|,|524.95|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Catalytic Converter 1999-2001 - CA - AT
Have a defective catalytic converter? Smells funny? You hear whistling sounds when the throttle is applied? When the car is idling, you hear the sure tell sign of rattling sounds of the catalyst that has broken apart from the converter casing or converter shell?
With a defective or clogged cat you can actually feel the decrease in performance and notice a decrease in fuel economy. Trapped exhaust gas creates back-pressure which prevents your engine to breathe properly. This may cause your engine to quit after a few minutes of driving or make the engine feel like it is starving for fuel.
Due to a number of complaints of the short life-span of cheap aftermarket versions, and recent increased requests begging for the availability of stock OEM Genuine Mazda Miata Catalytic Converters we have put them on the site, here you go!
Note: A common cause for catalytic converter failure is a defective oxygen sensor. When you replace your cat, we highly recommend getting a new oxygen sensor with a brand that states it has an OE, Original Equipment, type connector.
California Emissions - Automatic Transmission Only
|,|"Select Year" "1999-2000" "2001 add(+$275.00)"|-||-|||-||GEMAMICACO191|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear Catalytic Converter 2001 - CA - MT|,|921-208|,|499.99|,|399.95|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Catalytic Converter 1999-2001 - CA - MT
*1999-2000 NO LONGER AVAILABLE
Have a defective catalytic converter? Smells funny? You hear whistling sounds when the throttle is applied? When the car is idling, you hear the sure tell sign of rattling sounds of the catalyst that has broken apart from the converter casing or converter shell?
With a defective or clogged cat you can actually feel the decrease in performance and notice a decrease in fuel economy. Trapped exhaust gas creates back-pressure which prevents your engine to breathe properly. This may cause your engine to quit after a few minutes of driving or make the engine feel like it is starving for fuel.
Due to a number of complaints of the short life-span of cheap aftermarket versions, and recent increased requests begging for the availability of stock OEM Genuine Mazda Miata Catalytic Converters we have put them on the site, here you go!
Note: A common cause for catalytic converter failure is a defective oxygen sensor. When you replace your cat, we highly recommend getting a new oxygen sensor with a brand that states it has an OE, Original Equipment, type connector.
California Emissions - Manual Transmission Only
|,|"Select Year" "2001 add(+$430.00)"|-||-|||-||GEMAMICACO19|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear Catalytic Converter 2001 - MT|,|921-204|,|999.99|,|799.95|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Catalytic Converter 2001 - MT
Have a defective catalytic converter? Smells funny? You hear whistling sounds when the throttle is applied? When the car is idling, you hear the sure tell sign of rattling sounds of the catalyst that has broken apart from the converter casing or converter shell?
With a defective or clogged cat you can actually feel the decrease in performance and notice a decrease in fuel economy. Trapped exhaust gas creates back-pressure which prevents your engine to breathe properly. This may cause your engine to quit after a few minutes of driving or make the engine feel like it is starving for fuel.
Due to a number of complaints of the short life-span of cheap aftermarket versions, and recent increased requests begging for the availability of stock OEM Genuine Mazda Miata Catalytic Converters we have put them on the site, here you go!
Note: A common cause for catalytic converter failure is a defective oxygen sensor. When you replace your cat, we highly recommend getting a new oxygen sensor with a brand that states it has an OE, Original Equipment, type connector.
Federal Emissions - Manual Transmission Only
NOTE: 1999-2000 is No Longer Available by Mazda
|,|"Select Year" "2001"|-||-|||-||GEMACACO90|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Rear Catalytic Converter 90-93 and 96-97|,|921-201|,|1,024.00|,|782.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Catalytic Converter 90-93 and 96-97
Have a defective catalytic converter? Smells funny? You hear whistling sounds when the throttle is applied? When the car is idling, you hear the sure tell sign of rattling sounds of the catalyst that has broken apart from the converter casing or converter shell?
With a defective or clogged cat you can actually feel the decrease in performance and notice a decrease in fuel economy. Trapped exhaust gas creates back-pressure which prevents your engine to breathe properly. This may cause your engine to quit after a few minutes of driving or make the engine feel like it is starving for fuel.
Due to a number of complaints of the short life-span of cheap aftermarket versions, and recent increased requests begging for the availability of stock OEM Genuine Mazda Miata Catalytic Converters we have put them on the site, here you go!
Note: A common cause for catalytic converter failure is a defective oxygen sensor. When you replace your cat, we highly recommend getting a new oxygen sensor with a brand that states it has an OE, Original Equipment, type connector.
|,|"Select Year" "Select Here" "1990-1993 - OEM Style Aftermarket" "1996-1997"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-REAR-CONTROL-ARM-BUSHING-KIT-1990-1997-FACTORY-PK28460|,|19MAMISUANDS11|,|Genuine Mazda Miata OEM Rear Control Arm Bushing Kit 1990-2005|,|OEM-PK28460|,|476.95|,|379.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Control Arm Bushing Kit 1990-1997
Includes 14 bushing for the rear upper and lower control arms.
NA01-28-460(4), NA01-28-4D0 (2), NA01-28-8C0C (6), NA01-28-4B0 (2)
|,|||-||GENUINE-MAZDA-MIATA-OEM-SET-PLATE-LH|,|SOFT-TOP|,|Genuine Mazda Miata OEM Rear Hook Plate Driver Side 1990-2005|,|NC10-R1-592D|,|73.15|,|59.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Hook Plate Driver Side 1990-2005
Reference #6 in illustration
Genuine Mazda Miata Set plate LH(drivers) Revised Left hand side set plate from TSB #09/003-03.
|,|||-||GENUINE-MAZDA-MIATA-OEM-SET-PLATE-RH|,|SOFT-TOP|,|Genuine Mazda Miata OEM Rear Hook Plate Passenger Side 1990-2005|,|NC10-R1-582D|,|73.15|,|59.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Hook Plate Passenger Side 1990-2005
Reference #5 in illustration
Genuine Mazda Miata Set Plate RH(passangers). Revised Right hand side set plate from TSB #09/003-03.
|,|"Year" "1999" "2000" "2001"|-||-|||-||NC10-26-130|,|19MAMISUANDS6|,|Genuine Mazda Miata OEM REAR Knuckle Assembly 1999-2005|,|NC10-26-130|,|605.07|,|429.76|,||,||,||,||,||,||,|Genuine Mazda Miata OEM REAR Knuckle Assembly 1999-2005
|,|"Select Side" "Select Here" "Driver Side add(+$15)" "Passenger Side"|-||-|"Select Option" "Select Here" "Without Abs add(+$70)" "With Abs"|-||-|||-||NA01-26-140B|,|19MAMISUANDS|,|Genuine Mazda Miata OEM REAR Knuckle Without Abs 1990-1993|,|NA01-26-140B|,|522.66|,|409.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM REAR Knuckle Without Abs 1990-1993
Driver Side SKU: NA01-26-140B
Passenger Side SKU: NA01-26-130B
Part can be found as reference #7 in illustration
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||GEMAMIOEMREL|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear License Plate Light 1999-2005|,|OEM-NC10-51-270B|,|54.99|,|39.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear License Plate Lights
*There are two of these on the vehicle, quantity 1 per order.
|,|||-||REARMAINSEAL|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Rear Main Seal|,|903-275|,|37.98|,|32.02|,||,||,|0.000 |,||,|sdfsd|,||,|Genuine Mazda Miata OEM Rear Main Seal for Years 1990-2005
|,|||-||GEMAMIOEMREM|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Rear Main Seal 1990 1.6|,|OEM-BP05-11-312|,|38.36|,|31.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Main Seal 1990 1.6
VIN# Required*
|,|||-||GENUINE-MAZDA-MIATA-REAR-MUD-GUARD-SET|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Rear Mud Guard Set 1990-1997|,|NA75-V3-460G|,|101.95|,|86.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Mud Guard Set 1990-1997
Mazda Miata Rear Mud Guard Set. Easy installation. Just bolt on ... no drilling.This Kit contains both right and left rear mud guards and the hardware needed to install them.Protect your paint from rocks and other road debris.
|,|||-||GENUINE-MAZDA-MIATA-OEM-REAR-NON--PAINTED-LIP-SPOILER-SOFT-TOP-MODELS-ONLY-|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda Miata OEM Rear Non- Painted Lip Spoiler(Soft-Top Models Only)|,|NH52-V4-920A|,|302.95|,|262.60|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Non- Painted Lip Spoiler(Soft-Top Models Only)
Genuine Mazda Miata Rear Non-Painted Lip Spoiler(Soft-Top Models Only will not work on a Power Hardtop model).Accent your sporty attitude,with this race-inspired Rear Lip Spoiler , and complete the sports car look.
|,|"Year" "Select Here" "2009" "2010" "2011" "2012" "2013"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-REAR-PADS|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Rear Pads|,|NFY7-26-48ZA|,|114.95|,|101.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Pads
Genuine Mazda Miata Rear Pads
|,|"Year" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013" "2014" "2015"|-||-|||-||BCYF-26-49ZA|,|19MAMIBRRORE|,|Genuine Mazda Miata OEM Rear Plate Shim with Pad Backing Clip 1995-2005|,|BCYF-26-49ZA|,|28.18|,|25.02|,||,||,||,||,||,||,|Mazda Miata OEM Rear Plate Shim with Pad Backing Clip 1995-2005
- 1995-2000 Miata - All
- 2001-2005 Miata - w/ Normal Suspension
|,|||-||N123-26-251B|,|20MAMIBRRORO|,|Genuine Mazda Miata OEM REAR Rotors 2006-2015|,|N123-26-251B|,|109.95|,|92.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM REAR Rotors 2006-2015
*Priced per side
|,|"Special Handling fee" "add(+$15)"|-||-|||-||NC10-51-5H0A|,|NBLIGHTING|,|Genuine Mazda Miata OEM Rear Side Marker Lamp 1999-2005|,|NC10-51-5H0A|,|37.43|,|28.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Rear Side Marker Lamp 1999-2005
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$28.02)"|-||-|||-||99REARSPOILP|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Rear Spoiler 1999-2005|,|909-970|,|350.32|,|315.95|,||,||,|5.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Rear Spoiler 1999-2005
These may either come painted or primered according to availability of paint color from Mazda. Price is the same either way.
Please state your VIN number on the first page of check out in the section.
|,|||-||NC10-28-700C|,|19MAMISUANDS9|,|Genuine Mazda Miata OEM REAR Strut 1999-2005|,|nc10-28-700c|,|177.16|,|157.16|,||,||,||,||,||,||,|Genuine Mazda Miata OEM REAR Strut 1999-2005
|,|"Select Year" "Select Here" "1999-2000" "2001-2005 add(+$10)"|-||-|"Select Option" "Select Here" "Normal Suspension" "Sport Suspension add(+$35)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-REAR-TRANSMISSION-SEAL|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Rear Transmission Seal|,|M507-17-335A|,|29.29|,|24.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Rear Transmission Seal
Genuine Mazda Miata Rear Transmission Seal
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||NC10-28-C10|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Genuine Mazda Miata OEM REAR Upper Control Arm 1990-2005|,|NC10-28-C10|,|305.46|,|232.96|,||,||,||,||,||,||,|Genuine Mazda Miata OEM REAR Upper Control Arm 1990-2005
Arm Upper-Rear
Lower Control Arm Rear Bushing - NA01-34-490
Upper Control Arm Bushing - NA01-28-8C0C
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$232.96)"|-||-|"Do you need Lower Control Arm Rear Bushing (Qty 2)?" "Select Here" "Yes add(+$60)"|-||-|"Do you need Upper Control Arm Bushing (Qty 2)?" "Select Here" "Yes add(+$50)"|-||-|||-||NE52-R1-415C|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Genuine Mazda Miata OEM Rear Weather-Strip 2007-2015|,|NE52-R1-415C|,|493.97|,|408.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Rear Weather-Strip 2007-2015
|,|||-||B455-33-047D-MV|,|19MAMIBRROAC|,|Genuine Mazda Miata OEM Rear Wheel Bearing 1990-2005|,|B455-33-047D-MV|,|50.95|,|42.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Rear Wheel Bearing 1990-2005
SKU: B455-33-047D-MV
Positions: Left Inner, Left Outer, Left Rear, Left Front, Right Inner,
Right Outer, Right Rear, Right Front
Other Names: Wheel Bearings, Rear Wheel Bearing, Wheel Bearing, Front Wheel Bearing, Taper Bearing
Description: 323 & Protege. Miata mx5. MX-3. 4wd. Inner & outer.
Applications: 4WD. MIATA MX5.
|,|||-||GENUINE-MAZDA-MIATA-OEM-REMANUFACTURED-PASSENGER-S-SIDE-CALIPER-FRONT-1990-1993-|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Remanufactured Passenger's Side Caliper Front(1990-1993)|,|NA10-33-980R-TC|,|152.07|,|149.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Remanufactured Passenger's Side Caliper Front(1990-1993)
Genuine Mazda Miata Remanufactured Passenger's Side Caliper Front(1990-1993). Both the retail price and the sale price include a $50.00 refundable core charge. The core charge will be refunded once the old caliper has been returned to us with a copy of the invoice. Returned caliper cores must be complete and assembled.
|,|"Select Year" "1990" "1991" "1992" "1993"|-||-|||-||GEMAMIREAS19|,|MIATA-OEM-INTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Replacement Ashtray 1999-2005|,|907-213|,|89.45|,|74.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Replacement Ashtray 1999-2005
Replace your broken, damaged, or faded ashtray with a factory replacement direct from Mazda.
|,|"Select Year and Color" "1999-2000 Black" "1999-2000 Tan" "1999-2000 Beige" "2001-2005 Black"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-REPLACEMENT-FOGLAMP-BULB|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda Miata OEM Replacement Foglamp Bulb|,|0000-11-H11|,|30.26|,|25.72|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Replacement Foglamp Bulb
Genuine Mazda Replacement Foglamp Bulb burned out? Replace it with a new genuine Mazda factory foglamp bulb.
|,|"Select Year" "2004" "2005" "2006" "2007" "2008"|-||-|||-||MIREWAJETNO1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Replacement Washer Jet Nozzle 1999-2005|,|909-571|,|26.08|,|21.02|,||,||,|0.000 |,||,||,||,|These Genuine Mazda Miata OEM Replacement Washer Jet Nozzle are for years 1999-2005.
Priced Per Washer Jet Nozzle. Make sure you update the quantity in your cart to 2 if you like to change both Washer Jet Nozzle.
|,|"Select Side" "Driver's Side" "Passenger Side"|-||-|||-||GEMAMIRRORIN|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM RR Ornament in Red Letters|,|907-758|,|39.99|,|32.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM RR Ornament in Red Letters
|,|||-||N247-64-730-02|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda Miata OEM Satin Chrome Air Vent Bezel 2016-2021+|,|N247-64-730-02|,|74.88|,|62.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Satin Chrome Air Vent Bezel 2016-2021+
A C Vent Louver
Give your MX-5 interior sporty good looks with these Air Vent Bezels in Satin Chrome finish. (Qty: 1 pc)
Genuine Mazda Original Parts
|,|||-||GEMAMIOEMOIL2|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Seal Silicon |,|OEM-8527-77-739|,|35.24|,|29.35|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Oil Pan Seal Silicon
Required for new Oil Pan Seal*
|,|||-||GENUINE-MAZDA-MIATA-OEM-SEALDUST-BALL-JOINT-1990-2005-|,|MAPA191|,|Genuine Mazda Miata OEM Sealdust Ball Joint 1990-2005|,|OEM-H266-28-448|,|14.01|,|12.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Sealdust Ball Joint 1990-2005
* #28 448 in the diagram shown.
|,|||-||NA01-57-631B-00|,|NASEATSDOOR|,|Genuine Mazda Miata OEM Seat Belt Anchor Cover 1990-1997|,|NA01-57-631B-00|,|6.99|,|4.92|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Seat Belt Anchor Cover 1990-1997
Reference #3 in illustration
90-93: NA01-57-631B-00
94-97: N026-57-631-00
|,|"Select Year" "Select Here" "1990-1993" "1994-1997"|-||-|||-||OEM-NB2SEATBELTL|,|NBINSEDO|,|Genuine Mazda Miata OEM Seat Belt Assembly Driver Side 1999-2005|,|NC10-57-690E-00|,|371.86|,|314.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Seat Belt Assembly Driver Side 1999-2005
NC10-57-690E-00: 1999-2000
NC72-57-L30E-00: 2001-2005
#1 on Diagram
|,|"Select Year" "Select Here" "1999-2000" "2001-2005 add(+$17)"|-||-|||-||OEM-NB2-SEATBELTR|,|NBINSEDO|,|Genuine Mazda Miata OEM Seat Belt Assembly Passenger Side 1999-2005|,|NC10-57-630F-00|,|303.88|,|209.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Seat Belt Assembly Passenger Side 1999-2005
NC10-57-630F-00: 1999-2000
N066-57-L30D-00: 2001-2005
#1 on Diagram
|,|"Select Year" "Select Here" "1999-2000" "2001-2005 add(+$105)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-SELECT-LEVER-1990-1993|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Select Lever 1990-1993|,|NA0346100F|,|464.25|,|409.37|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Select Lever 1990-1993
Genuine Mazda Miata OEM Select Lever for Automatic Transmission years 1990-1993
|,|||-||NA03-46-100F|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-1990-1997|,|Genuine Mazda Miata OEM Select Lever 1990-1993|,|NA03-46-100F|,|891.18|,|669.95|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Select Lever 1990-1993
#46010 on the Diagram.
|,|||-||GEMAMIOEMLES|,|MIATA-OEM-INTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Shift Boot 1999-2005|,|OEM-NC10-64-331A|,|69.64|,|55.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Leatherette Shift Boot 1999-2005
Fits all 99-05 Mazda Miatas with 5 speed transmissions.
10th Anniversary, Base, LS, SE, Shinsen, Mazdaspeed
|,|||-||GENUINE-MAZDA-MIATA-OEM-SHIFT-LEVER-BUSHING|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Shift Lever Bushing|,|0398-17-462A|,|10.99|,|9.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Shift Lever Bushing
Genuine Mazda Miata Shift Lever Bushing
|,|"Select Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000"|-||-|||-||NA0-7629|,|NABOOTS|,|Genuine Mazda Miata OEM Shifter Bushing Rebuild Kit Fits 1990-2005|,|NA0-7629|,|62.00|,|49.00|,||,||,||,||,||,||,|Mazda Miata Shifter Bushing Rebuild Kit Fits 1990-2005
1990-1997 5-Speed. Includes 1 shim, 2 wave washers, 2 large ball bushings, 1 small ball bushing and one large side ball bushing.
1999-2005 5-Speed. Includes 1 wavy washer, 1 wave washer with clips, 2 large ball bushings,and 1 small ball bushing.
|,|"Select Year" "Select Here" "1990-1997 add(+$10)" "1999-2005 5-Speed" "2002-2005 6-Speeds add(+$5)"|-||-|||-||SHABFR90|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Shock Absorber Front 1990-1993|,|909-SHA|,|267.20|,|209.95|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Shock Absorber Front 1990-1993
OEM replacement.
|,|||-||GENUINE-MAZDA-MIATA-OEM-SHOCK-ABSORBER-FRONT-1994-1997|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Shock Absorber Front 1994-1997|,|N018-34-700B|,|246.68|,|202.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Shock Absorber Front 1994-1997
OEM replacement. Price is for one shock
Mazda Miata / Without Bilstein Equipped
|,|||-||GEMAMISHABRE|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Shock Absorber Rear 1990-1993|,|909-SHA2|,|144.14|,|126.80|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Shock Absorber Rear 1990-1993
OEM replacement. Price is for one shock.
|,|||-||GENUINE-MAZDA-MIATA-OEM-SHOCK-ABSORBER-REAR-1994-1997|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Shock Absorber Rear 1994-1997|,|N018-28-700B|,|238.68|,|196.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Shock Absorber Rear 1994-1997
OEM replacement. Price is for one shock.
Mazda Miata / Without Bilstein Equipped
|,|||-||NC10-28-015A|,|19MAMISUANDS9|,|Genuine Mazda Miata OEM Shock Boot 1999-2005|,|NC10-28-015A|,|21.71|,|18.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Shock Boot 1999-2005
#3 IN ILLUSTRATION
Positions: Left, Right
Other Names: Dust Shield, Boot Dust
|,|||-||GEMAMIOEMSHB|,|19MAMISUANDS9|,|Genuine Mazda Miata OEM Shock Bump Stop 1999-2005|,|OEM-NC10-34-111|,|49.97|,|42.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Shock Bump Stop
#5 on the diagram
If you are replacing your shocks, make sure to consider a set of replacement bump stops. Since these also act as the bumpstops in your Miata, its important that they are in good shape.
Price is PER BOOT.
|,|"Select Side" "Front" "Rear"|-||-|||-||GEMAMISHPLWI|,||,|Genuine Mazda Miata OEM Short and Long Plug Wire Set 2001-2004|,|901-123|,|89.90|,|75.90|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wire set 2001-2004. Comes with two short wires and two long wires, four total. Part #5 in picture.
|,|||-||GENUINE-MAZDA-MIATA-OEM-SIDE-SILL-EXTENSIONS-NON--PAINTED|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda Miata OEM Side Rocker Molding 2009-2013|,|NHY2-51-P40-XX|,|622.13|,|487.55|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Side Rocker Molding 2009-2013
***VIN Number Required***
Genuine Mazda Miata OEM Side Rocker Molding 2009-2013
Driver's Side SKU: NHY2-51-P50-XX
Passenger's Side SKU: NHY2-51-P40-XX
Please supply your VIN in the comments section of your order at Check Out.
|,|"Select Year" "Select Here" "2009" "2010" "2011" "2012" "2013"|-||-|"Select Side" "Select Here" "Passenger's Side" "Driver's Side add(+$40.00)"|-||-|"Shipping Cost" "add(+$85)"|-||-|||-||GENMAZSIDSIL|,|NBACCESSORIES|,|Genuine Mazda Miata OEM Side Sills 2001-2005|,|909-830|,|439.99|,|369.95|,||,||,|10.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Side Sills 2001-2005
NO LONGER AVAILABLE
Complete your Miata's aerodynamic look with Side Sills designed to complement the front air dam and rear spoiler. Easily installed between the front and rear wheels. Available painted in many 1999 thru 2003 colors. Please email us for availability of your particular color. Please provide VIN number in comments box when ordering. Cannot be used with front mud guards. Select either Large (top photo) or Small (bottom photo). The Large side sills do not fit the 99-00 model, only the small do; both sizes fit years 01-03.
Please note this item is sold in pairs.
Additional freight will be charged upon invoicing.
* NOTE: 1999-2000 Small Side Sills are no longer available. *
|,|"Select Size" "Large - Top Photo FOR 2001+ Only add(+$38.00)"|-||-|||-||QNDE-51-P10A-PZ|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Side Still Extensions 2016-2020|,|QNDE-51-P10A-PZ|,|499.95|,|459.64|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Side Still Extensions 2016-2020
|,|"Shipping & Handing" "add(+$89)"|-||-|||-||MISICECAP20|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Silver Center Cap 2006-2008|,|WH-SCC|,|19.99|,|14.95|,||,||,|0.000 |,||,||,||,| Miata Silver Center Cap
Fits 2006-2008 MX-5 Silver 16" and 17" Wheel, non-chrome.
|,|||-||GENUINE-MAZDA-MIATA-OEM-SILVER-FOG-LAMP-BEZEL|,|20MAMIEXLI|,|Genuine Mazda Miata OEM Silver Fog Lamp Bezel|,|NH18-V7-247|,|109.95|,|94.93|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Silver Fog Lamp Bezel
Genuine Mazda Miata Silver Fog Lamp Bezel
|,|"Year" "2009" "2010" "2011" "2012"|-||-|||-||GEMAMIOEMSIS|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Sirius Satellite Radio with Installation Kit 2009-2015|,|910-Z40|,|479.99|,|382.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Sirius Satellite Radio with Installation Kit .
Upgrade to Sirius Radio. Free Sirius subscription for 6 months. You can receive broadcast of over 120 channels of crisp, digital-quality music, news, sports and entertainment from coast to coast. 100% commercial free. Not compatible with PhatNoise Car Audio System. (SIRIUS subscription required; not available in Alaska and Hawaii)
For Mazda MX-5 Miata Years: 2009 - 2015
|,|||-||MAFASLCY|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Slave Cylinder 1990-2005|,|906-255|,|154.26|,|128.02|,||,||,|0.000 |,||,|drgertg|,||,|Genuine Mazda Miata OEM Slave Cylinder 1990-2005
Genuine Mazda Miata OEM Slave Cylinder - Please indicate VIN# in comment section.
|,|||-||SMRUSHBO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Small Rubber Shift Boot 1990-2005|,|906-370|,|59.99|,|38.90|,||,||,|0.000 |,||,|gomiata.com|,||,|Genuine Mazda Miata OEM Small Rubber Shift Boot 1990-2005
This is the small rubber shift boot that sits at the base of the shift lever.
1990-1993 (up to VIN#413071): M514-17-480A
1993-2005 (from VIN# 413072): M513-17-480A
|,|"Select Year" "Select Here" "1990-1993 (up to VIN#413071)" "1993-2005 (from VIN# 413072) add(+$14)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-SOFT-TOP-CENTER-HANDLE-SCREW-1990-2005|,|SOFT-TOP|,|Genuine Mazda Miata OEM Soft Top Center Handle Screw 1990-2005|,|OEM-9983-10-612B|,|4.99|,|2.99|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Soft Top Center Handle Screw 1990-2005
This "Screw" Fits Mazda Miata years 1990-2005. For uses with the soft top center handle.
If you need 2, please change the Qty. at check out to Qty. 2.
|,|||-||GEMASOTOPFR|,|SOFT-TOP|,|Genuine Mazda Miata OEM Soft Top Frame 1990-2005|,|OEM-NA01-R1-100E|,|1,499.99|,|1,499.99|,||,||,|10.000 |,||,||,||,|Genuine Mazda Miata OEM Soft Top Frame 1990-2005
Tree fall on your Miata? Ouch.
All the metal links and cables needed to replace a damaged soft top frame. This is for 1990-2005 Miatas only.
NOTE: This is a Special Order - No Return or Exchange for this OEM Soft Top Frame from Japan.
|,|"Select Year" "Select Here" "1990-1997 (BACK ORDER)" "1999-2005 add(+$400.00)"|-||-|"Select Shipping Type from Japan" "2-3 Weeks Shipping Cost add(+$399)"|-||-|||-||NA01-R1-461|,|SOFT-TOP|,|Genuine Mazda Miata OEM Soft Top Side Weatherstrip Retainer 1990-2005|,|NA01-R1-461|,|169.58|,|145.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Soft Top Side Weatherstrip Retainer 1990-2005
Reference #4, 5, 6 in illustration
|,|"Select Side" "Select Here:" "Driver Side" "Passenger Side" "Both Side add(+$145.02)"|-||-|||-||NE51-R1-461B|,|SOFTTOPNC|,|Genuine Mazda Miata OEM Soft Top Upper & Lower Retainer 2006-2015|,|NE51-R1-461B|,|113.94|,|84.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Soft Top Upper Retainer 2006-2015
#17 & 18 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$84.02)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-SPARE-TIRE|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Spare Tire 1990-2005|,|PK14-86-6000|,|169.99|,|149.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Spare Tire 1990-2005
T115 / 70D14 - TIRE
PRODUCT DESCRIPTION
This SPARE TIRE is a genuine OEM Mazda part. We offer the best online prices with fast shipping on any order placed with us.
MAZDA OEM PARTS
With a history like this, it is no wonder Mazda is considered an innovator in the automotive industry. From unique designs to advancements in aerodynamics and engineering Mazda has always raised the standards of what qualifies as the best.
REMANUFACTURED PART!
|,|"Shipping Cost" "add(+$49)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-SPARE-WHEEL|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Spare Wheel 1992-1995|,|OEM-9965-24-4040|,|169.01|,|149.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Spare Wheel 1992-1995
PRODUCT DESCRIPTION
This WHEEL, SPARE is a genuine OEM Mazda part #9965-24-4040. We offer the best online prices with fast shipping on any order placed with us. Re-manufactured Item
MAZDA OEM PARTS
With a history like this, it is no wonder Mazda is considered an innovator in the automotive industry. From unique designs to advancements in aerodynamics and engineering Mazda has always raised the standards of what qualifies as the best.
NOTE: Does not come with Spare Tire. Tire is sold separate.
Tire and rim/wheel are separate parts, NOT mounted. 1-3 days to ship.
|,|"Shipping Cost" "add(+$49)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-SPARK-PLUGS--SET-OF-4-|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Spark Plugs (Set of 4) 2006-2015|,|0000-18-L3Y1|,|111.40|,|89.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Spark Plugs (Set of 4) 2006-2015
Mazda Miata Genuine Spark Plugs (Set of 4).Mazda recommends change every 100,000 miles. We at Med Center Mazda change these at 60,000 miles.Change the airfilter also.
|,|||-||GENUINE-MAZDA-MIATA-OEM-SPEEDOMETER-DRIVE-GEAR---GEAR-SET--DRIVEN-SPEED-AUTOMATIC|,|MAPA191|,|Genuine Mazda Miata OEM Speedometer Drive Gear - Gear Set, Driven - Speed (Automatic)|,|OEM-N451-17-400|,|106.66|,|79.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Speedometer Drive Gear - Gear Set, Driven - Speed (Automatic Transmission)
Automatic Transmission Case and Main Control System
For Mazda MX-5 Miata Years: 1994, 1995, 1996, and 1997
Transmission = Automatic
|,|||-||GENUINE-MAZDA-MIATA-OEM-STEREO-ORNAMENT-FC02-55-235A|,|NADASHBOARD|,|Genuine Mazda Miata OEM Stereo Ornament 1990-1997|,|OEM-FC02-55-235A|,|38.23|,|33.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Stereo Ornament 1990-1997
This Stereo Ornament is 1.5 DIN, where you can put in radio too!
|,|||-||MASTSW|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Stoplight Switch|,|925-280|,|15.62|,|13.95|,||,||,|0.000 |,||,|zskdfhd;s|,||,|Genuine Mazda Miata OEM Stoplight Switch for years 1990-1997
|,|"Please Select" "90-97 w/o Cruise Control" "90-97 w/ Cruise Control add(+$1.00)"|-||-|||-||GEMAMIOEMHAT2|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1999-2005|,|Genuine Mazda Miata OEM Striker Plate 2003-2005|,|OEM-NA01-R1-371J|,|65.99|,|49.95|,||,||,|0.000 |,||,||,||,|These are the Genuine Mazda Miata 2003-2005 OEM Striker Plates.
Windshield Header Soft Top Striker Fits:
After 11/01/2002 Production
*Item is for one side only, please make sure you select either driver or passenger side. If you would like to order both sides be sure to add a driver and a passenger side to your shopping cart.
*Does not include hardware.
|,|"Select Side" "Driver" "Passenger"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-STRUT-RUBBER-MOUNT-1990-1997|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Strut Mount 1990-1997|,|OEM-NA01-28-380B|,|139.54|,|109.02|,||,||,|0.000 |,||,||,||,|Fits: 1990-1997 Mazda Miata.
Upper Shock Mount. Front and rear are the same.
|,|||-||MAMISUNSH|,|NBINVIALL|,|Genuine Mazda Miata OEM Sun Shield 1999-2005|,|818-500|,|79.99|,|59.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Sun Shield
Genuine Mazda Miata OEM Sun Shield. Protect your Miata dash from the sun. Keep the heat down also.
Available Years: 1999-2005
|,|||-||B092-52-518|,|NAEXAC|,|Genuine Mazda Miata OEM Support Rod Holder 1990-1997|,|B092-52-518|,|9.95|,|5.86|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Support Rod Holder 1990-1997
|,|||-||GEMAMIOEMTAL|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine Mazda Miata OEM Tail Lamp - 1999-2000 Limited Edition|,|909-355|,|192.10|,|154.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Tail Lamp - Limited Edition
For Mazda Miata Limited Edition years: 1999 and 2000
|,|"Select Side" "Driver Side" "Passenger Side"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-THERMOSTAT-GASKET-1990-2005|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Thermostat Gasket 1990-2005|,|OEM-B62115173|,|8.27|,|5.98|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Thermostat Gasket 1990-2005
Genuine Mazda Miata OEM Thermostat Gasket. For Miata years 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, and 2005.
NOTE: This does NOT come with a Thermostat. This is ONLY the Thermostat "Gasket". Thermostat sold separately.
|,|||-||L336-15-170|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Thermostat w/ Gasket 2006-2015|,|L336-15-170|,|70.95|,|58.04|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Thermostat w/ Gasket 2006-2015
Item Fits MX-5 Without turobcharger.
|,|"Select Year" "Select Here" "2006-2007" "2008-2015"|-||-|||-||MACAMCOGA|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Throttle Damping 1990-1993|,|901-265|,|155.57|,|122.02|,||,||,|0.000 |,||,|regrg|,||,|Genuine Mazda Miata OEM Throttle Damping is for Years 1990-1993
|,|||-||B630-18-911|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Throttle Position Sensor 1990-1993|,|B630-18-911|,|231.25|,|166.48|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Throttle Position Sensor 1990-1993
|,|"Select Option" "Select Here" "Auto Transmission (B6S8-18-911)" "Manual Transmission add(+$80)|-||-|||-||GENMAZTIMBEL|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Timing Belt 1990-2005|,|903-340|,|83.07|,|68.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Timing Belt 1990-2005
Take care of your Miata and replace this every 60,000 miles.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-TIMING-BELT-IDLER-PULLEY-1990-2005|,||,|Genuine Mazda Miata OEM Timing Belt Idler Pulley 1990-2005|,|B660-12-730C|,|91.72|,|76.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Timing Belt Idler Pulley
Fit's Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, and 2005
|,|||-||TIMBELIDPUL|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Timing Belt Idler Pulley 1990-2005|,|903-370|,|93.55|,|78.02|,||,||,|0.000 |,||,|agaag|,||,|Genuine Mazda Miata OEM Timing Belt Idler Pulley for years 1990-2005
|,|||-||OEMTIBETE|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Timing Belt Tensioner Pulley 1990-2003|,|903-365|,|115.74|,|96.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Timing Belt Tensioner Pulley for the years 1990-2003
|,|||-||BP6D-12-4X0D|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Timing Gear 2001-2005|,|BP6D-12-4X0D|,|771.68|,|692.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Timing Gear 2001-2005
SKU: BP6D-12-4X0D
Other Names: Actr Variable V Timing
Description: MIATA MX5; CAMSHAFT GEAR; INTAKE CAMSHAFT; FROM 12/01/01
Applications: 4 CYLINDER.
|,|||-||MATITESP|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Timing Tensioner Spring|,|903-360|,|12.54|,|9.02|,||,||,|0.000 |,||,|cre|,||,|Genuine Mazda Miata OEM Timing Tensioner Spring for Years 1990-2005
|,|||-||GENUINE-MAZDA-MIATA-OEM-TIRE-PRESSURE-MONITOR-SENSOR--TPS--EACH|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Tire Pressure Monitor Sensor (TPS) Each|,|BBM2-37-140B-GS1D-37-141A|,|98.57|,|83.79|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Tire Pressure Monitor Sensor (TPS) Each
Genuine Mazda Tire Pressure Monitor Sensor (TPS) Each. Replacing your Mazda with winter tires or do you have a sensor gone bad? Replace it with a new Genuine Mazda Part.
|,|"Year" "2004" "2005" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013"|-||-|||-||OEM-NC-MOULDING-L|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Top of Door Weather Stripping Left Driver Side 2006-2015|,|OEM-NE51-50-650G|,|92.29|,|78.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Top of Door Weather Stripping Left Driver Side 2006-2015
This is the molding that goes across the top of the door, also known as the belt line molding.
*Price is for EACH side.
*#1 on the Diagram
|,|||-||OEM-NC-MOULDING-R|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Top of Door Weather Stripping Right Passenger Side 2006-2015|,|OEM-NE51-50-640G|,|92.27|,|78.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Top of Door Weather Stripping Right Passenger Side 2006-2015
This is the molding that goes across the top of the door, also known as the belt line molding.
*Price is for EACH side.
*#1 on the Diagram
|,|||-||GEMAMIOEMRAR|,|SOFTTOPNC|,|Genuine Mazda Miata OEM Top Stowage Compartment Water Deflector 2006-2013 Soft Top Only|,|OEM-NF79-71-440D|,|128.95|,|105.45|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Top Stowage Compartment Water Deflector 2006-2013 Soft Top Only
For NC models(06+) w/soft top only. Includes only one side. Be sure to note which side you need when ordering.
If both sides need, make sure to order both sides individually.
|,|||-||TRLEDI|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Transmission Level Dipstick 1990-2005|,|903-260|,|28.14|,|22.02|,||,||,|0.000 |,||,|bgtrsh|,||,|Genuine Mazda Miata OEM Transmission Level Dipstick for years 1990-2005
|,|"Select Year" "1990-1993" "1994-1997 add(+$10.00)" "1999-2005 add(+$1.00)"|-||-|||-||GEOEMMATRPAN|,|MAPA191|,|Genuine Mazda Miata OEM Transmission Pan Gasket 1994-1997|,|OEM-BT28-19-835|,|26.41|,|21.09|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Transmission Pan Gasket 1994-1997
*VIN# Required
|,|||-||GEMAMILOFOR1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Trunk Latch for 1990-1997|,|909-590|,|69.99|,|59.55|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Trunk Latch for 1990-1997.
|,|||-||GENUINE-MAZDA-MIATA-OEM-TRUNK-LOCK-ACTUATOR-MOTOR--LOCK-LID--2001-2002|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Trunk Lock Actuator Motor (LOCK LID) 2001-2002|,|OEM-N066-56-820D|,|161.14|,|128.91|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Trunk Lock Actuator Motor (LOCK LID) 2001-2002
This is a Trunk Lock Actuator Motor that fits the 2001-2002 MAZDA MIATA - 2 door with the engine. The Trunk Lock Actuator Motor is designed by MAZDA to be part of the Body-Trunk Lid and Compartment. The Trunk Lock Actuator Motor has a position on the vehicle of General. The 2001-2002 MAZDA MIATA Trunk Lock Actuator Motor is a factory made MAZDA OEM part and it comes with a 12 month 12.000 mile warranty (parts only).
Do not be fooled by an aftermarket MAZDA MIATA Trunk Lock Actuator Motor! Buy a factory MAZDA part and receive peace of mind!
This factory part has a part number of N066-56-820D.
|,|||-||GENUINE-MAZDA-MIATA-OEM-TRUNK-WEATHERSTRIP-1999-2005|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Trunk Weatherstrip 1999-2005|,|NC10-56-951|,|112.16|,|96.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Trunk Weatherstrip 1999-2005
Number 56-951 on the picture.
Genuine Mazda Miata OEM Trunk Weatherstrip for Mazda MX-5 Miata Years: 1999, 2000, 2001, 2002, 2003, 2004, and 2005
|,|||-||GEMAMIOEMTUS|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Turn Signal Switch 1996-1997|,|909-515|,|69.99|,|59.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Turn Signal Switch
For Mazda Miata Years: 1996 and 1997
|,|||-||NH42-34-250|,|20MAMISUANDS2|,|Genuine Mazda Miata OEM Upper Control Arm 2006-2017+|,|NH42-34-250|,|211.61|,|175.05|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Upper Control Arm 2006-2017+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side add(+$20)"|-||-||-||-|||-||GEOEMMAMIUPC|,|19MAMISUANDS5|,|Genuine Mazda Miata OEM Upper Control Arm Bushings 1990-1997|,|OEM-NA01-34-480A|,|61.07|,|47.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Upper Control Arm Bushings
*#15 shown in diagram.
**Price is per bushing. 4 required for both sides, 2 each side.
* For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||GENUINE-MAZDA-MIATA-OEM-VALUE-MAZDA-FRONT-PADS-ONLY|,|MIATA-OEM-OTHER-PARTS-1990-1997|,|Genuine Mazda Miata OEM Value Mazda Front Pads Only 1994-2005|,|NAY5-33-28ZA-MV|,|49.95|,|43.05|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Value Mazda Front Pads Only
Genuine Mazda Miata Value Mazda Front Pads Only. These pads are for Normal Suspension. If unsure of Suspension please state last 8 of your VIN at checkout.
|,|"Select Year" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-VALUE-PADS-CLIPS-ONLY--1994-2000-|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Value Pads Clips Only (1994-2000)|,|NAY5-33-29Z-MV|,|20.99|,|15.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Value Pads Clips Only (1994-2000)
Genuine Mazda Miata Value Pads Clips Only (1994-2000).Value Front Pads Clips Only
|,|"Year" "1994" "1995" "1996" "1997" "1999" "2000"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-VALUE-PADS-CLIPS-ONLY--2001-2005-|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Value Pads Clips Only (2001-2005)|,|N0Y3-33-29Z-MV|,|20.99|,|15.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Value Pads Clips Only (2001-2005)
Genuine Mazda Miata Value Pads Clips Only (2001-2005). Normal Suspension. If unsure of suspension please state last 8 of your VIN at checkout.
|,|"Year" "2001" "2002" "2003" "2004" "2005"|-||-|||-||GEMAMIVACOOE|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Valve Cover 1994-2003|,|903-235|,|537.95|,|449.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Valve Cover for year 1990-1997
|,|"Select Year" "Select Here" "1994-1997" "1999-2000" "2001-2003"|-||-|||-||VELO19|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata OEM Ventilator Louvers 1990-1997|,|907-450|,|45.99|,|33.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Ventilator Louvers 1990-1997
These are for the Ventilator Louvers for the 1990-1997 Mazda Miata's.
There are priced per Ventilator Louver.
These Ventilator Louvers, better known as "Air Out Balls" for many Miata Owners.
|,|"Select Year" "1990-1991" "1992-1997 add(+$6.00)"|-||-|||-||MAWABYHOKIT|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Water Bypass Hose Kit 1999-2005|,|905-370|,|82.85|,|66.02|,||,||,|0.000 |,||,|vregerg|,||,|Genuine Mazda Miata Water Bypass Hose Kit is for years 1999-2005 - Includes 4 Hoses
|,|"Select Year" "1999-2000" "2001-2005"|-||-|||-||WATERPUMP|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Water Pump 1990-2005|,|905-140|,|191.79|,|172.02|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Genuine Mazda Miata OEM Water Pump 1990-2005
Genuine Mazda Miata OEM water pump (remanufactured per Mazda).
Is your Mazda Miata have a leaking water pump? This factory kit is all you need to replace it.
Also needs to be replaced when you replace the timing belt (while you're there...).
Does not include Gaskets or O Ring for Water Pump.
|,|"Select Year" "Select Here" "1990-1993 (After-Market)" "1994-2005 add(+$6)"|-||-|"Do You Need Two Gaskets and a O Ring for your OEM Water Pump" "No" "Yes, add(+$21.02)"|-||-|||-||GEMAMIOEMWAP|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Water Pump Gasket 1990 1.6|,|OEM-B621-15-116A|,|19.86|,|14.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Water Pump Gasket 1990 1.6
VIN# required*
|,|||-||GENUINE-MAZDA-MIATA-OEM-WATER-PUMP-GASKET-AND-O-RING-KIT1|,|MAPA191|,|Genuine Mazda Miata OEM Water Pump Gasket and O Ring Kit|,|Water-Pump-Gasket-O-Ring-Kit|,|29.98|,|24.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Water Pump Gasket and O Ring Kit
One Water Pump Gasket (OEM-B6BF-15-116); One Water Pump Inlet (OEM-B366-15-165); One O Ring (OEM-E301-15-287)
Number 2, 3, and 4 on the picture
|,|||-||GENUINE-MAZDA-MIATA-94-05-WATER-PUMP-KIT|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Water Pump Kit 1994-2005|,|PKB6BF15010F|,|213.20|,|178.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Water Pump Kit 1994-2005
Genuine Mazda Miata OEM water pump (remanufactured per Mazda).
Is your Mazda Miata have a leaking water pump? This factory kit is all you need to replace it.
Also needs to be replaced when you replace the timing belt (while you're there...).
Does not include Gaskets or O Ring for Water Pump.
|,|"Year" "Select Here" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|"Do You Need Two Gaskets and a O Ring for your OEM Water Pump" "No" "Yes, add(+$23)"|-||-|||-||GEMAMIOEMWH1|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Wheel 1999-2005 5-Spoke 14x6|,|OEM-9965-25-6040|,|290.95|,|263.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel 1999-2005 5-Spoke 14x6
Price is per wheel*
*Center caps not included
VIN REQUIRED at checkout for wheel and center caps
|,|"Need Center Cap?" "No Thanks" "Yes, I need a Center Cap add(+$30)"|-||-|"Shipping Cost" "add(+$49)"|-||-|||-||GEMAMIOEMWH0|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Wheel 2001-2003 5-Spoke Silver |,|OEM-9965-27-6560|,|359.38|,|292.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel 2001-2003 5-Spoke Silver
Came on 2001-2003 Sport Miata's but will fit all 1999-05 models.
* Size: 16x6.5
* Weight: 19 lbs
* Finish: Silver
Price is per wheel*
*Center caps not included
VIN REQUIRED at checkout for wheel and center caps
|,|"Need Center Cap?" "No Thanks" "Yes, I need a Center Cap add(+$28)"|-||-|"Shipping Cost" "add(+$49)"|-||-|||-||OEM-NC2-CENTER-CAP-BLK|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Wheel Black Center Cap 2012-2015|,|OEM-KD51-37-190|,|14.91|,|8.92|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Black Center Cap 2012-2015
*Fits: 2012 + MX-5 With Gunmetal Wheels (From 01/01/12 Production)
*Priced Per Each Center Cap
|,|||-||GENUINE-MAZDA-MIATA-OEM-WHEEL-CENTER-CAP-2001-2003-5-SPOKE-SILVER-16-6-5|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Wheel Center Cap 2001-2003 5-Spoke Silver 16x6.5|,|OEM-N067-37-190|,|53.62|,|43.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Center Cap 2001-2003 5-Spoke Silver 16x6.5
Center Cap Fits: 2002 Miata SE Wheel
|,|||-||OEM-NC-CENTER-CAP-SILVER|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Wheel Center Cap Silver 2006-2010|,|OEM-G22C-37-190A|,|14.63|,|10.59|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Center Cap Silver 2006-2010
*Fits: 2006-2008 MX-5 All
2009-2010 MX-5 (Up to 11/08/10 Production)
*Price is for Each
|,|||-||OEM-NC2-SILVER-CENTERCAP|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Wheel Center Cap Silver 2009-2015|,|OEM-BBM2-37-190|,|16.64|,|12.50|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Center Cap Silver 2009-2015
Center Cap Fits : 2009 + MX-5
*Price is for One Center Cap
|,|||-||GEMAWHLO19|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Genuine Mazda Miata OEM Wheel Locks 1990-2019+|,|C9N3-V9-740|,|73.95|,|61.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Locks. Unique lug pattern makes these Mazda wheel locks virtually tamper proof.
Price is for Set of 4.
NOTE: BBS Caps will not fit with these Genuine Mazda Miata OEM Wheel Locks.
|,|||-||OEM-BLACK-LUG-KEY|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Wheel Locks Set Black 2006-2015 |,|OEM-0000-88-BLK-BP|,|84.95|,|72.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Locks Set Black 2006-2015
Keep your Genuine Mazda Wheels From Theft by Using these Wheel Lock Lug Nuts.
*Includes 4 Wheel Black Locks + 1 Lug Key
|,|||-||OEM-BLACK-LUGS-NUTS|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Miata OEM Wheel Lug Nuts Black (20) 2006-2015|,|OEM-QMST-LA-000|,|71.95|,|59.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wheel Lug Nuts Black (20)
*Set of 20 Lug Nuts
|,|||-||WIPLWHO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata OEM Window Plates With Housing|,|907-641|,|83.94|,|74.95|,||,||,|0.000 |,||,|regrg|,||,|Genuine Mazda Miata OEM Window Plates With Housing
|,|"Select Year" "1990-1995" "1996-1997"|-||-|||-||OEM-NC11-67-330-9U|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata OEM Wiper Blade Assembly 1999-2005 (Both Side)|,|oem-nc11-67-330-9u|,|49.55|,|39.02|,||,||,||,||,||,||,|Genuine Mazda Miata OEM Wiper Blade Assembly 1999-2005 (Both Side)
Genuine Mazda Miata OEM Wiper Blade Assembly 1999-2005 (Both Sides)
This is the wiper blade assembly unit that attaches to the wiper blade arm and houses the blade replacements.
This is for the pair, and they each come with a blade replacement insert already attached.
NC11-67-330-9U, NC10-67-330-9U
|,|||-||GEMAMIOEMWIW1|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Wiper Washer Container w/pump - REMANUFACTURED 1990-1997|,|OEM-NA17-67-4T0A|,|292.34|,|194.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Wiper Washer Container w/pump
Part can be found as reference #7 in illustration.
REMANUFACTURED PRODUCT
|,|||-||GEMAMIOEMWIW|,|19MAMIMAVEAL|,|Genuine Mazda Miata OEM Wiper Washer Container, Reservoir Tank 1990-1997|,|NA17-67-4T1|,|156.40|,|114.02|,||,||,|0.000 |,||,||,||,||,|||-||GENUINE-MAZDA-MIATA-OEM-WORKSHOP-MANUAL--2004-2008-|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda Miata OEM Workshop Manual (2004-2008)|,|workshop-manual--2004-2008|,|271.78|,|231.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Workshop Manual (2004-2008)
|,|"Select Year" "2004" "2005" "2006" "2007" "2008"|-||-|||-||GEMAMIOEMZOK|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata OEM Zoom-Zoom Key Tag|,|OEM-9999-91-U400|,|19.99|,|10.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Zoom-Zoom Key Tag
Genuine Mazda Zoom-Zoom Key Tag. 2" Die cut metal plated key tag.
|,|||-||GENUINE-MAZDA-MIATA-OIL-PRESSURE-KIT|,|MIATA-OEM-INTERIOR-PARTS-1990-1997|,|Genuine Mazda Miata Oil Pressure Sending Unit 1990-1997|,|OEM-B61P-18-501|,|273.01|,|228.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Oil Pressure Sending Unit 1990-1997
Genuine Mazda Miata Oil Pressure Sending Unit 1990-1997. Change the old dummy gauge into a real oil pressure guage. Includes the new Mazda oil pressure switch. B61P-18-501
|,|"Year" "Select Here" "1991-1994" "1995-1997"|-||-|||-||GENUINE-MAZDA-MIATA-PASSENGER-SIDE-WIPER-ARM|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda Miata Passenger Side Wiper Arm|,|NA02-67-321-LA01-67-395C|,|74.02|,|62.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Passenger Side Wiper Arm
Genuine Mazda Miata Passenger Side Wiper Arm rusty and look bad? Replace your passenger side wiper with this factory part.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-RADIATOR-HOSE-KIT-1-8-94-97|,|19MAMIMAVEAL|,|Genuine Mazda Miata Radiator Hose Kit 1.8 94-97|,|PKMRHK18|,|60.85|,|51.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Radiator Hose Kit 1.8 94-97
Genuine Mazda Miata Radiator Hose Kit 1.8 94-97. This kit contains the upper, lower and inlet radiator hoses.
|,|"Year" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-SOFT-TOP-TENSION-CABLE-1|,|SOFT-TOP|,|Genuine Mazda Miata Soft Top Tension cable (1)|,|NA01-R1-215|,|54.21|,|39.30|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Soft Top Tension cable (1)
Genuine Mazda Miata Soft Top Tension cable (1) worn out or broke? These cables create tension between the soft top and the top frame, effectively reducing windnoise and weather penetration. Old streached, rusted or broken cables should be replaced with new Mazda Factory Tension cables
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-MIATA-SPARK-PLUG-SET-4-NGK-BKR6E-11|,|19MAMIMAVEAL|,|Genuine Mazda Miata Spark Plug Set ( 4 NGK BKR6E-11) 1990-1991|,|0000-18-BP03|,|21.20|,|16.59|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Spark Plug Set ( 4 NGK BKR6E-11)
Mazda Miata Spark Plug Set. Factory replacement set of 4 NGK plugs. Spark plugs need to replaced every 30,000 miles along with oil filter, fuel filter and air filter.
|,|"Year" "1990" "1991"|-||-|||-||GENUINE-MAZDA-MIATA-TIMING-BELT-KIT-1-6|,|19MAMIMAVEAL|,|Genuine Mazda Miata Timing Belt Kit 1.6|,|PK9193TBELTKIT|,|193.73|,|144.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Timing Belt Kit 1.6 91-93-From 209447
Mazda Miata Timing Belt Kit. Mazda recommends changing your timing belt every 60,000 miles. Includes timing belt, valve cover gasket, tensioner spring, 2 cam seals, 1 oil pump seal. NOTE: While changing the timing belt, the water pump is easily accessed. We would recommend changing it at this time also.
|,|"Year" "1991" "1992" "1993"|-||-|"VIN" "Last 6 of vin is after 209447"|-||-|||-||GENUINE-MAZDA-MIATA-94-2000-TIMING-BELT-KIT|,|19MAMIMAVEAL|,|Genuine Mazda Miata Timing Belt Kit 1994-2000|,|PK94-00TBELTKIT|,|209.97|,|149.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata 1994-2000 Timing Belt Kit
Genuine Mazda Miata 1994-2000 Timing Belt Kit. Mazda reccomends changing your Timing Belt every 60,000 miles.
Includes timing belt, valve cover gasket, tensioner spring, 2 cam seals, 1 oil pump seal.
NOTE: While changing the timing belt, the water pump is easily accessed. We would reccomend changing it at this time also.
|,|||-||OEMTIMINGPKNB2|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Genuine Mazda Miata Timing Belt Kit 2001-2005|,|PK01-05TBELTKIT|,|189.97|,|138.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Timing Belt Kit 2001-2005
Genuine Mazda Miata 2001-2005 Timing Belt Kit. Mazda reccomends changing your Timing Belt every 60,000 miles.
Includes timing belt, valve cover gasket, tensioner spring, 2 cam seals, 1 crank seal.
NOTE: While changing the timing belt, the water pump is easily accessed. We would recommend changing it at this time also.
|,|||-||GENUINE-MAZDA-MIATA-VALVE-COVER-GASKET-1990-1993|,|19MAMIMAVEAL|,|Genuine Mazda Miata Valve cover gasket (1990-1993)|,|10-235B|,|38.67|,|31.36|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Valve cover gasket (1990-1993)
Mazda Miata Valve Cover Gasket. Replace your valve cover gasket with this factory part.
|,|"Year" "1990" "1991" "1992" "1993"|-||-|||-||L501-10-230|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda Miata Valve Cover Gasket 2006-2019|,|L501-10-230|,|38.84|,|33.00|,||,||,||,||,||,||,|Genuine Mazda Miata Valve Cover Gasket 2006-2019+
|,|"Select Year" "Select Here" "2006-2015" "2016-2019+"|-||-|||-||GENUINE-MAZDA-MX-5-MIATA-CENTER-CAP-FOR-17--BLACK-DIAMOND-CUT-ALLOY-WHEEL-2006-2015|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX 5 Miata "Center Cap" for 17" Black Diamond Cut Alloy Wheel 2006-2015|,|OEM-C831-V3-815-BL|,|14.95|,|10.52|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX 5 Miata "Center Cap" for 17" Black Diamond Cut Alloy Wheel 2006-2015
Center Cap is to be used with 17 Black Diamond Cut Alloy Wheel. Mazda OEM Part # NH52-V3-810-SB.
NOTE: 10-14 Days to Ship
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-COMBO-TAILLAMP-ASSEMBLY-2009-2015|,|20MAMIEXLI|,|Genuine Mazda MX 5 Miata OEM Driver Side Combo Taillamp Assembly 2009-2015|,|OEM-NH18-51-180F|,|584.95|,|472.02|,||,||,||,||,||,||,|Genuine Mazda MX 5 Miata OEM Driver Side Combo Taillamp Assembly 2009-2015
Genuine Mazda MX-5 Miata OEM Driver Side Taillamp cracked or broke? Replace it with a genuine Mazda MX-5 Miata factory taillamp. Does not come with new sockets and bulbs.
Genuine Mazda MX 5 Miata OEM
Genuine Mazda MX 5 Miata OEM Parts are engineered and built to meet or exceed the Original Equipment Manufacturers (OEM) specifications. Mazda applies the latest engineering advancements learned from decades of manufacturing and service expertise. Genuine Mazda Parts go through months of rigorous validation and testing to ensure optimal performance and durability and carry the Mazda Limited Warranty.
|,|||-||GEMAMIAIRVEB|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Air Vent Bezel 2006-2015|,|910-330|,|69.95|,|44.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Air Vent Bezel. Give your MX-5 interior sporty good looks with these Air Vent Bezels in aluminium finish.
*Quantity 1, for a full set set quantity 4 in checkout.
|,|||-||MAZDA-MX-5-MIATA-ALL-WEATHER-FLOOR-MATS-SET-OF-2|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM All Weather Floor Mats 2016+|,|0000-8B-D30|,|95.05|,|82.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM All Weather Floor Mats 2016-2019+
Genuine Mazda Miata All Weather Floor Mats. Charcoal Black Vinyl-Front. All weather mats feature a deep waffle design to protect the floor and carpeting from water, mud ,sand and snow. durable and easily cleaned.
|,|||-||GEMAMIMXANBA|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Antenna Assembly 2006-2015|,|NF79-66-930C|,|123.01|,|105.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Antenna Assembly for year 2006-2015
|,|||-||GEMAMIMXANMA|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Antenna Mast 2006-2015|,|909-212|,|39.72|,|31.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Antenna Mast for year 2006-2015
|,|||-||GENUINE-MAZDA-MIATA-OEM-ASHTRAY|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Ashtray 2016-2021|,|C235-64-660A|,|32.95|,|26.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Ashtray 2016-2021+
Mazda Ashtray. Add convenience to your Mazda with this removable Ashtray. Ashtray fits in center console cupholder.
|,|"Model" "Mazda MX-5 Miata 2016-2021"|-||-|||-||OEM-AUTO-SHIFT-KNOB-NC|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Automatic Shift Knob 2006-2014|,|NE56-V8-170F|,|159.99|,|134.99|,||,||,|0.000 |,||,||,||,|Leather / Aluminum Shift Knob Fits:
2006 + MX-5 w/Automatic Transmission
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-BATTERY-COVER-BOLT|,|MAZDA-MX-5-MIATA-BATTERY-2006-2012|,|Genuine Mazda MX-5 Miata OEM Battery Cover Bolt 2006-2012|,|OEM-GA5R56034A|,|10.56|,|9.59|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Battery Cover Bolt
For Mazda MX-5 Miata Years: 2006, 2007, 2008, 2009, 2010, 2011, and 2012
|,|||-||GENMAZCARCOV|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Car Cover|,|909-821|,|249.99|,|219.95|,||,||,|0.000 |,||,|adgdsagadsg|,||,|Genuine Mazda MX-5 Miata OEM Car Cover - All Weather StormProof Fabric
Protect your car from the elements and curious eyes with this car cover constructed of high-quality, weather-resistant fabric. The custom tailored cover features side mirror pockets. Car cover cable lock available separately. Cover must be pierced for mast-style antenna.
|,|"Select" "2006-2010 Indoor in Gray With Bag"|-||-|||-||GENUINE-MAZDA-MX-5-OEM-CAR-COVER-2016|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Car Cover 2016+|,|0000-8J-D04|,|229.95|,|199.29|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Car Cover 2016+
Mazda MX-5 Car Cover. Helps you keep your MX-5's finish looking like new. Custom fit with the MX-5 logo, side-mirror pockets and rear license plate window. Weather-resistant StormProof fabric. Gray, Includes Storage Bag
|,|||-||0000-88-0900-LK|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda MX-5 Miata OEM Car Cover Cable Lock 2012-2019|,|OEM0-0000-88-0900-LK|,|29.95|,|18.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Car Cover Cable Lock 2012-2019
Manufacturer: Mazda USA
Part Number: 0000-88-0900-LK
Part: CAR COVER CABLE LOCK
|,|||-||0000-8J-D05|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Car Cover, Indoor 2016+|,|OEM-0000-8j-d05|,|259.99|,|209.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Car Cover, Indoor 2016+
Also Known As:
Car Cover Indoor
Description:
Material stretches to the shape of your MX-5 like a glove providing indoor protection and a tidy fit.
Red, Includes Storage Bag.
Manufacturer:
Genuine Mazda Original Parts
|,|||-||CHROMFUELDOO1|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Chrome Fuel Door 2006 - 2015|,|0000-8R-D20|,|149.99|,|104.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Chrome Fuel Door
NOTE: ONLY Matte Finish available for 2006-2015 Soft Top
The fuel door is designed specifically for your Miata to add a stylish chrome accent to the rear of the vehicle.
The Miata Chrome Fuel Door is easy to install. No cutting or drilling needed.
|,|"Select Year" "2006-2015 Soft Top"|-||-|||-||NE51-50-7S0E-NE51-50-7R0C-|,|20MIMIEXPA|,|Genuine Mazda MX-5 Miata OEM COWL GRILLE 2006-2015|,|OEM-NE51-50-7S0E|,|99.85|,|83.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Cowl Grille 2006-2015
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" " Driver's Side" "Passenger's Side" "Both Side add(+$83.02)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-COWL-GRILLE-OPTIONAL-CAP-2006-20012|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Cowl Grille Cap 2006-2015|,|E016-50-796|,|4.99|,|3.92|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Cowl Grille Cap 2006-2015
This cap is priced per one cap.
If you need 2, please change the qty. to 2 during your check out.
|,|||-||PEDD-11-300|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda MX-5 Miata OEM Crankshaft 2016-2022|,|PEDD-11-300|,|455.99|,|462.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Crankshaft 2016-2022
Part can be found as reference #28 in illustration
|,|"Select Year" "Select Here" "2016-2018" "2019-2022 add(+$260)"|-||-|"Shipping & Handling" "add(+$105)"|-||-|||-||MAMIMXDOEDGU|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Door Edge Guards 2006-2008|,|907-410|,|99.99|,|65.95|,||,||,|0.000 |,||,||,||,|Protect the outer edge of your doors with color matched Door Edge Guards.
Each set of guards is custom made to the exact contours of your MX-5.
Available Colors: Brilliant Black (A3F) or (PZ), Sunlight Silver (22V), Winning Blue, Red, and Gray.
For Mazda MX-5 Miata Years: 2006, 2007, and 2008
VIN REQUIRED at checkout.
** SORRY the Genuine Mazda MX-5 Miata OEM Door Edge Guards is DISCONTINUED. See Don't Miss for Similar Parts **
|,|"Select Color" "Brilliant Black (A3F)" "True Red (A4A)" "Copper Red (32V)" "Marble White (A5M)" "Sunlight Silver (22V)" "Galaxy Gray (32S)" "Stormy Blue Mica (35J)" "Highland Green (35K)"|-||-|||-||GEMAMXMIOEMT|,|20MAMIEXLI|,|Genuine Mazda MX-5 Miata OEM Driver Side Taillamp 2006-2008|,|OEM-NF79-51-180C|,|357.80|,|296.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Driver Side Taillamp 2006-2008
Genuine Mazda MX-5 Miata OEM Driver Side Taillamp cracked or broke? Replace it with a genuine Mazda MX-5 Miata factory taillamp. Does not come with new sockets and bulbs.
|,|"Select Year" "Select Here" "2006" "2007" "2008"|-||-|"Select Taillamp Side" "Driver Side"|-||-|||-||GEMAMIENSTSW|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Engine Start Switch 2006-2009|,|910-450|,|279.99|,|234.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Engine Start Switch 2006-2009
Mazda Miata Engine Start Switch. Add the look and feel of a true race care with this functional start button.
|,|||-||0000-8B-D30|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Floor Mats, All-Weather 2016|,|OEM-0000-8B-D30|,|99.95|,|84.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Floor Mats, All-Weather 2016
Manufacturer: Mazda
Part Number: 0000-8B-D30
Part: FLOOR MATS, ALL-WEATHER
|,|||-||MAMIMXFOGLAB|,|20MAMIEXLI|,|Genuine Mazda MX-5 Miata OEM Fog Lamp Bezels 2006-2008 (Silver only)|,|910-310|,|109.99|,|79.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Fog Lamp Bezels(Silver Only)
Accent your Genuine Mazda MX-5 Miata OEM Fog Lamps with these silver color bezels with stylish appeal.
For Mazda Miata Years: 2006, 2007, and 2008
|,|"Select Year" "Select Here" 2006 2007 2008|-||-|||-||GEMAMIMXFRAI|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Front Air Dam 2006-2008|,|OEM-NF51-V4-900F-BB|,|579.99|,|419.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Front Air Dam
Give your MX-5 a lowered, ground effects look, especially when combined with the sporty Side Sills and Rear Bumper Skirt.
NOTE: Gray Shown - Actual Product Is PRIMER
For Mazda MX-5 Miata Years: 2006, 2007, and 2008
|,|"Select Color" "PRIMER ONLY"|-||-|"Shipping & Handling" "add(+$89)"|-||-|||-||QNDE-50-AH0A|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Front Air Dam 2016+|,|QNDE-50-AH0B-PZ|,|475.09|,|374.90|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Front Air Dam 2016+
Give your MX-5 a lowered, racer look. The Front Air Dam provides a bold look designed to integrate with the existing body styling.
Air Deflector p/n N243-V4-990 is required for the Front Air Dam installation.
|,|"Shipping Cost" "add(+$95)"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-MASK-TOURING-AND-GRAND-TOURING-WITHOUT-FRONT-AIR-DAM|,|20MAMIEXGRAN|,|Genuine Mazda MX-5 Miata OEM Front Mask Touring, Grand Touring, Sport with Front Air Dam 2009-2012|,|0000-8G-D07|,|222.95|,|185.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Front Mask Touring and Grand Touring with Front Air Dam 2009-2012
Genuine Mazda MX-5 Miata Front Mask Touring and Grand Touring with Front Air Dam. Keep your MX-5 Miata's front end free of nicks and scratches from insects and road debris. Custom tailored for a snug fit.
Fits Mazda MX-5 Miata Years: 2009, 2010, 2011, and 2012 (0000-8G-D07)
|,|"Select Year" "Select Here" "2009-2012"|-||-|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-MASK-SPORT-WITHOUT-FRONT-AIR-DAM|,|20MAMIEXGRAN|,|Genuine Mazda MX-5 Miata OEM Front Mask Touring, Grand Touring, Sport without Front Air Dam 2009-2012|,|0000-8G-D06|,|222.92|,|185.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Front Mask Sport without Front Air Dam
Genuine Mazda MX-5 Miata Front Mask Sport without Front Air Dam. Keep your MX-5's front end free of nicks and scratches from insects and road debris. Custom tailored for a snug fit.
Fits Mazda MX-5 Miata Years: 2009, 2010, 2011, 2012 (0000-8G-D06)
Fits Mazda MX-5 Miata Years: 2013, 2014, 2015 (0000-8G-D10)
|,|"Select Year" "Select Here" "2009-2012"|-||-|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-FRONT-SPLASH-GUARDS-PAINTED-SET-OF-2-2016|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Front Splash Guards Painted (set of 2) 2016+|,|NA1J-V3-450-XX|,|149.95|,|139.96|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Front Splash Guards Painted (set of 2) 2016+
Mazda MX-5 Miata Front Splash Guards Painted (set of 2).Protect your paint finish from rocks and other road debris.
|,|"Year" "2016-2019"|-||-|"Color" "SELECT COLOR" "ARCTIC WHITE (A4D)" "CRYSTAL WHITE PEARL (34K)" "SOUL RED METALLIC (41V)" "JET BLACK MICA (41W)" "METEOR GRAY MICA (42A)" "BLUE REFLEX (42B)" "CERAMIC METALLIC (47A)"|-||-|||-||N243-42-410F|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda MX-5 Miata OEM Fuel Door 2016+|,|N243-42-410F|,|76.52|,|56.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Fuel Door 2016+
Ready to paint.
Fits 16-18 Mazda MX5 without hard top.
Manufacturer: Genuine Mazda Original Parts
|,|||-||GEMAMIFUPRRE4|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda MX-5 Miata OEM Fuel Pressure Regulator 2006-2015|,|LFB6-13-280|,|51.95|,|43.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata MX-5 fuel pressure regulator for the 2006-2015
|,|||-||GEMAMIFUPU12|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine Mazda MX-5 Miata OEM Fuel Pump 1994-1997|,|BPE8-13-35Z|,|597.56|,|498.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Fuel Pump
Comes with mounting hardware.
For Mazda MX-5 Miata Years: 1994, 1995, 1996, and 1997.
|,|"Need the Fuel Pressure Regulator?" "No" "Yes add (+$165)"|-||-|||-||GEMAMIFUPUAS3|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Genuine Mazda MX-5 Miata OEM Fuel Pump Assembly 2006-2015|,|LFG1-13-35XA|,|308.85|,|254.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata MX-5 fuel pump assembly for the 2006-2015
Comes with the fuel pump, mounting bracket, fuel pressure, Fuel Filter, Fuel Pressure Regulator, and Sending Unit regulator.
Part can be found as reference #2 in illustration
|,|||-||GEMAMIHA20|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Genuine Mazda MX-5 Miata OEM Hardtop 2006-2015|,|909-911|,|7,710.25|,|6,295.22|,||,||,|150.000 |,||,||,||,|Genuine Mazda Miata OEM Mazda MX-5 Miata Hardtop 2006-2015
Turn your MX-5 Miata into a stylish all-season tourer. Easily attached and removed. This Hard Top comes with Defrost Rear window and is pre-painted (hence the more expensive price compared to the earlier generations) to match your Miata's color. The interior comes in black only.
Includes all hardware and instructions to install.
Any questions, please use the Contact Go Miata Customer Service at 1-619-466-4282.
Additional charges may apply with the specific year, model, and vehicle option if needed.
NOTE: Please supply your VIN in the comments section of your order.
NOTE: Approximately 6-8 weeks ESD
|,|"Freight Cost" "add(+$389)"|-||-|||-||OEM-MAZDA-HEADER-RING-GASKET|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda MX-5 Miata OEM Header Ring Gasket 2016-2019|,|PE23-40-305|,|16.95|,|13.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Header Ring Gasket 2016-2019
OEM Mazda header ring gasket for header to midpipe connection.
Price is for one gasket.
*** Product images may differ from actual product appearance ***
|,|||-||GENUINE-MAZDA-ILLUMINATED-REMOVABLE-ASHTRAY-2016|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Illuminated Removable Ashtray 2016+|,|C905-V0-880|,|64.95|,|56.31|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEMIlluminated Removable Ashtray 2016+
Genuine Mazda MX-5 Miata OEM Illuminated Removable Ashtray.Added convenience for you with this illuminated removable Ashtray. Fits center console cup holder.
|,|"Year" "SELECT YEAR" "2010" "2011" "2012" "2013" "2014" "2015" "2016" "2017" "2018" "2019"|-||-|"Model" "Mazda MX-5 Miata"|-||-|||-||GEMAMIINPA20|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Instrument Panel 2006-2008|,|910-335|,|189.99|,|168.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Instrument Panel 2006-2008
Genuine Mazda MX-5 Miata OEM Instrument Decorative Trim Panel. Add a more sporty touch to your interior. Comes in Simulated Wood, Classic Red, or Brushed Aluminum.
NE54-V1-190F - Brushed Aluminum
NE61-V1-190F-10 - Classic Red
NE51-V1-190F - Wood Finish
|,|"Select Interior Color" "Select Here" "Classic Red" "Wood Finish" "Brushed Aluminum"|-||-|||-||GEMAMXMIOEMI|,|20MAMIINDA|,|Genuine Mazda MX-5 Miata OEM Instrument Panel 2009-2015|,|OEM-NE51-V1-190F|,|212.95|,|172.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda 2009-2010 MX-5 Miata OEM Instrument Decorative Trim Panel. Add a more sporty touch to your interior. Comes in Simulated Wood, Classic Red, Galaxy Gray, or Brushed Aluminum.
NE54-V1-190F - Brushed Aluminum Finish
NE61-V1-190F-10 - Classic Red
NE51-V1-190F - Wood Finish
|,|"Select Interior Color" "Select Here" "Classic Red" "Wood Finish" "Brushed Aluminum"|-||-|||-||IPAD20ON|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM iPod Adapter 2004-2008 Only|,|909-850|,|203.95|,|174.31|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM iPod Adapter 2004-2008 Only
Taking your Apple iPod along for the ride just become a lot easier. Mazda's iPod Integration Module allows you to play iPod through your Mazda's audio system with crystal-clear sound and a built-in-battery charger. Works with all 30-pin, dock connector equipped iPods. Compatible with factory installed Bose and standard Miata stereo system. Not compatible with SIRIUS Satellite Radio or PhatNoise Car Audio System. iPod not included. May require Swithching Box installation. Switching Box required to keep the Auxiliary Console Input functional.
|,|||-||D09H-51-270B|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda MX-5 Miata OEM License Lamp 2016+|,|D09H-51-270B|,|43.25|,|34.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM License Lamp 2016+
Manufacturer: Genuine Mazda Original Parts
|,|||-||GEMASPMILISL|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Limited Slip Differential 2006-2013|,|MS03-27-200A|,|1,353.87|,|1,109.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Limited Slip Differential has three jobs:
* To aim the engine power at the wheels
* To act as the final gear reduction in the vehicle, slowing the rotational speed of the transmission one final time before it hits the wheels
* To transmit the power to the wheels while allowing them to rotate at different speeds (This is the one that earned the differential its name.)
Available for years 2006-2013
|,|"Select Year" "Select Here" "2006" "2007" "2008" "2009" "2010" "2011" "2012" "2013"|-||-|||-||OEM-SHIFT-KNOB-NC-5-SPEED|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Manual 5 Speed Shift Knob 2006-2014|,|N124-V8-170F|,|149.99|,|125.00|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Manual 5 Speed Shift Knob 2006-2014
Aluminum & Leather 5-Speed Shift Knob Fits:
2006 + MX-5 w/5-Speed Manual Transmission
(6-Speed Shown in picture)
|,|||-||GEMAMIAN20|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Manual Antenna 2006-2009|,|909-8271|,|89.99|,|74.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Manual Antenna
For Mazda MX-5 Miata Years: 2006, 2007, 2008, and 2009.
|,|||-||GEMAMIMPPLWP|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM MP3/CD Player w/trim panel|,|910-365|,|379.99|,|319.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM MP3/CD Player w/trim panel for years 2004-2005.
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-NAVIGATION-SD-CARD-FOR-7--FULL-COLOR-TOUCHSCREEN-DISPLAY-2016|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Navigation SD Card for 7" Full-Color Touchscreen Display 2016-2020|,|BHP1-66-EZ1M|,|449.95|,|389.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Navigation SD Card for 7" Full-Color Touchscreen Display 2016-2020
Do you need to add Mazda GPS Navigation to your 2016-2000 CX-5, 2015 Mazda 3, 2016 Mazda 6, 2016-2000 Mazda MX-5 Miata? All you need is an Mazda Navigation Upgrade SD Card for 7" full-color touchscreen display. Mazda's fully integrated Navigation SD card works seamlessly with your Mazda Connect system. Bringing you maps, directions and more - all displayed on your car's touch screen.
Once the SD card is installed in a vehicle it cannot be transferred to another vehicle. Applies to vehicles with the Mazda Connect system and screen but without navigation from the factory.
2015 Mazda3, 2016 Mazda6, 2016 CX-5, 2016-2000 Mazda MX-5 Miata (with Mazdaconnect) NAVIGATION SYSTEM SD CARD CAUTION When installing a navigation SD card, confirm that the card is unlocked. Also, Mazda Does Not Recommend swapping navigation system SD cards from one vehicle to another. Based on data collected by the The SD card is VIN-locked when either of the below conditions are met:
1. After first installation of a new SD card, the vehicle has been driven 62 miles (100 Km). Note If the SD card is installed with the tab at the “LOCK” side, the navigation system will not operate. Note If a SD card with VIN-locked condition is installed to another vehicle, there will be an error message “Invalid SD Card” on the center display.
2. The SD Card was removed from the first vehicle (A) before 62 mile drive, and then installed on another vehicle (B). In this case, the SD card is VIN-locked for the vehicle (B) at the instant the card is inserted.
Note
If a SD card with VIN-locked condition is installed to another vehicle, there will be an error message “Invalid SD Card” on the center display.
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-OUTER-COVER-2013-2015|,|20MIMIEXPA|,|Genuine Mazda MX-5 Miata OEM Outer Cover 2013-2015|,|NP32-50-A11-BB|,|2.03|,|2.00|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Outer Cover 2013-2015
Special Order 2-3 Days to Ship
NOTE: DOES NOT COME PAINTED
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-PASSENGER-SIDE-COMBO-TAILLAMP-ASSEMBLY-2009-2015|,|20MAMIEXLI|,|Genuine Mazda MX-5 Miata OEM Passenger Side Combo Taillamp Assembly 2009-2015|,|OEM-NH18-51-170F|,|584.95|,|472.02|,||,||,||,||,||,||,|Genuine Mazda MX 5 Miata OEM Passenger Side Combo Taillamp Assembly 2009-2015
Genuine Mazda MX-5 Miata OEM Driver Side Taillamp cracked or broke? Replace it with a genuine Mazda MX-5 Miata factory taillamp. Does not come with new sockets and bulbs.
Genuine Mazda MX 5 Miata OEM
Genuine Mazda MX 5 Miata OEM Parts are engineered and built to meet or exceed the Original Equipment Manufacturers (OEM) specifications. Mazda applies the latest engineering advancements learned from decades of manufacturing and service expertise. Genuine Mazda Parts go through months of rigorous validation and testing to ensure optimal performance and durability and carry the Mazda Limited Warranty.
|,|||-||GEMAMXMIOEMP|,|20MAMIEXLI|,|Genuine Mazda MX-5 Miata OEM Passenger Side Taillamp 2006-2008|,|OEM-NF79-51-170C|,|357.80|,|296.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Passenger Side Taillamp 2006-2008
Genuine Mazda Miata Passenger Side Taillamp cracked or broke? Replace it with a genuine Mazda Miata factory taillamp. Does not come with bulbs and sockets.
|,|"Select Year" "Select Here" "2006" "2007" "2008"|-||-|||-||0000-8F-D10|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Perimeter Alarm System 2012-2015|,|0000-8F-D10|,|198.95|,|162.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Perimeter Alarm System 2012-2015
Also Known As:
Security Sys W Shock Sens
Manufacturer:
Genuine Mazda Original Parts
This Part Also Fits:
Mazda MX-5 Miata 2015 25th Anniversary Edition, Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2014 Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2013 Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2012 Grand Touring, Special Edition, Sport, Touring 2.0L L4 - Gas
|,|||-||NE52-R1-472|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Genuine Mazda MX-5 Miata OEM Power Retractable Hardtop Top REAR Retainer 2006-2015|,|NE52-R1-472|,|55.18|,|46.18|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Power Retractable Hardtop Top REAR Retainer 2006-2015
#12 IN ILLUSTRATION
This PRHT Retainer is Price per side, please select side.
NOTE: For Mazda MX-5 Miata with Power Retractable Hardtop only.
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-POWER-RETRACTABLE-HARDTOP-TOP-RETAINER|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Genuine Mazda MX-5 Miata OEM Power Retractable Hardtop Top UPPER Retainer 2006-2015|,|OEM-NE52-R1-460|,|53.79|,|39.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Power Retractable Hardtop Top Upper Retainer 2006-2015
#11 IN ILLUSTRATION
This PRHT Retainer is Price per side, please select side.
NOTE: For Mazda MX-5 Miata with Power Retractable Hardtop only.
|,|"Select Side" "Select Here" "Passenger Side" "Driver Side"|-||-|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-POWER-RETRACTABLE-HARDTOP-TOP-WEATHER-STRIPPING-WEATHERSTRIP|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Genuine Mazda MX-5 Miata OEM Power Retractable Hardtop Top Weather Stripping - Weatherstrip 2006-2015|,|NE52-R1-411C|,|67.55|,|54.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Power Retractable Hardtop Top Weather Stripping - Weatherstrip 2006-2015
#8 IN ILLUSTRATION
If your seals are leaking or worn, you are probably noticing the wind noise, not to mention the water coming in that can ruin your interior. These genuine Mazda weatherstrips are sold per side and install easily.
Price is per side, please select side.
NOTE: For Mazda MX-5 Miata with Power Retractable Hardtop only.
|,|"Select Side" "Passenger Side" "Driver Side"|-||-|||-||QNDE-50-360A|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Rear Bumper Skirt 2016+|,|QNDE-50-360A|,|515.65|,|454.00|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Rear Bumper Skirt 2016+
Description:
Here's an accessory everyone can get behind. This race-inspired Rear Diffuser makes your MX-5 even more stylish.
Combine them with the Front Air Dam, and Side Sill Extensions for an even bolder look. Brilliant Black (A3F)
|,|"Shipping Cost" "Add (+$89)"|-||-|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-REAR-CARGO-TRAY|,|SHOP-BY-SALE|,|Genuine Mazda MX-5 Miata OEM Rear Cargo Tray 2016+ -Sale|,|NF7R-V0-360|,|189.95|,|128.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Rear Cargo Tray 2016+
Genuine Mazda MX-5 Miata Rear Cargo Tray will help keep the cargo area carpet clean and free from damage. Cleans easily with soap and water.
|,|||-||NA1J-51-5J0C|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda MX-5 Miata OEM REAR Side Marker Lamp 2016+|,|NA1J-51-5J0C|,|58.93|,|46.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM REAR Side Marker Lamp 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-REAR-SPLASH-GUARDS-PAINTED-SET-OF-2-2016|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Rear Splash Guards Painted (set of 2) 2016+|,|NA1J-V3-460-XX|,|149.95|,|139.96|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Rear Splash Guards Painted (set of 2) 2016+
Mazda MX-5 Miata Rear Painted Splash Guards ( Set of 2) Not For Use With a Rear Bumper Skirt. Protect your paint finish from rocks and other road debris. They are available in all MX-5 colors.
|,|"Year" "2016-2019"|-||-|"Color" "SELECT COLOR" "ARCTIC WHITE (A4D)" "CRYSTAL WHITE PEARL (34K)" "SOUL RED METALLIC (41V)" "JET BLACK MICA (41W)" "METEOR GRAY MICA (42A)" "BLUE REFLEX (42B)" "CERAMIC METALLIC (47A)"|-||-|||-||2016-MAZDA-REMOTE-KEY-FOB-SILICONE-RUBBER-COVER--REMOTE-NOT-INCLUDED-|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Remote Key Fob Silicone Rubber Cover 2009-2018 (remote not included)|,|OEM-MZDAM24|,|18.99|,|10.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Remote Key Fob Silicone Rubber Cover 2009-2018 (remote not included)
Mazda Miata Remote Key Fob Silicone Rubber Cover (remote not included). Protective cover made out of silicone rubber for Mazda Miata keyless remote units.
Please make sure your remote looks like the picture.
|,|"Year and Model" "SELECT YEAR AND MODEL" "2009-2018 Miata MX-5 panic button covered"|-||-|"Color" "SELECT COLOR" "Black" "Red" "Green" "Blue" "Yellow" "Purple" "Orange" "Pink" "Gray"|-||-|||-||GEMAMIMXSISI|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Side Sill Extensions 2006-2013|,|910-400|,|699.99|,|532.02|,||,||,|20.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Side Sill Extensions
Continue the ground effects look withthese sporty Side Sills. Looks best when combined with a Front Air Dam and Rear Bumper Skirt.
To Recieve the right color for your car. Please state your VIN number at checkout.
SIDE SILL EXTENSIONS (SET OF 2 - NOT FOR USE WITH FRONT SPLASH GUARDS)
***"VIN REQUIRED***
|,|"Select Year" "Select Here" "2006-2008" "2009-2013 add(+$20)"|-||-|"Select Color for 2006-2008" "Primer Color"|-||-|"Select Color for 2009-2013" "Select Here" "Brilliant Black Clearcoat" "Copper Red Mica" "Stormy Blue"|-||-|"Shipping Cost" "add(+$105)"|-||-|||-||SISARAKITWII|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Sirius Satellite Radio Kit 2004-2008|,|907-775|,|399.99|,|299.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata Sirius Satellite Radio.
Upgrade to Sirius Radio. Free Sirius subscription for 6 months. You can receive broadcast of over 120 channels of crisp, digital-quality music, news, sports and entertainment from coast to coast. 100% commercial free. Not compatible with PhatNoise Car Audio System. (SIRIUS subscription required; not available in Alaska and Hawaii)
Available Years: 2004-2008
Click Here For Install Info
** SORRY the Miata OEM Sirius Satellite Radio Kit is DISCONTINUED. See Don't Miss for Similar Parts **
|,|"SIRIUS Installation Kit" "No, I don't need Installation Kit" "Yes, I need it for 2004-2005 add(+$19.99)"
"Yes, I need it for 2006-2008 Soft Top add(+$19.99)" "Yes, I need it for 2007-2008 PRHT add(+$19.99)"|-||-|||-||MAMISPSP|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Spring 2006-2015|,|907-920|,|139.71|,|79.02|,||,||,|5.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Sport Spring 2006-2015
|,|"Select Option" "Select Here" "2009-2015 Front without Sport Suspension, Manual Transmission" "2009-2015 Front without Sport Suspension, Automatic Transmission add(+$10)" "2009-2015 Front with Sport Suspension, without retractable hard top add(+$15)" "2006-2008 Front with Sport Suspension, without retractable hard top add(+$20)" " " "2006-2015 Rear without retractable hard top, Manual Transmission add(+$30)" "2006-2015 Rear without retractable hard top, Automatic Transmission add(+$20)" "2006-2015 Rear with retractable hard top, Manual Transmission add(+$20)"|-||-|||-||MAMISTTOBAR|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda MX-5 Miata OEM Strut Tower Bar 2006-2010|,|907-800|,|499.99|,|424.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda MAZDASPEED MX-5 Miata OEM Strut Tower Bar 2006-2010
Light weight aluminum Strut Tower Bar adds to the structural integrity of the vehicle.
Available Years: 2006-2010
|,|||-||NA1J-51-160F|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda MX-5 Miata OEM Tail Lamp Assembly 2016+|,|NA1J-51-160F|,|495.49|,|399.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Tail Lamp Assembly 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||0000-83-Z50|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Genuine Mazda MX-5 Miata OEM Valve Stem Caps 2016+|,|OEM-0000-83-Z50|,|25.95|,|22.55|,||,||,||,||,||,||,|Genuine Mazda MX-5 Miata OEM Valve Stem Caps 2016+
Made from chrome plated finish ABS, our Valve Stem Caps have the Mazda logo beautifully printed under a clear
doming to achieve a jewelry quality look and protect the logo for years to come. Black and silver with Mazda logo. Set of 4.
|,|||-||GENUINE-MAZDA-MX-5-MIATA-OEM-WINDSHIELD-SUNSCREEN-2016|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Genuine Mazda MX-5 Miata OEM Windshield Sunscreen 2016+|,|0000-8M-D11|,|59.95|,|53.90|,||,||,|0.000 |,||,||,||,|Genuine Mazda MX-5 Miata OEM Windshield Sunscreen 2016+
Mazda MX-5 Miata Windshield Sunscreen 2016+. Help keep your MX-5 interior cool while parked. Silver reflective material construction and includes the Mazda logo. Accordion fold.
|,|"Year" "2016"|-||-|||-||NF79-51-580E|,|20MAMIEXLI|,|Genuine Mazda MX-5 OEM 3rd Brake High Mount Lamp 2006-2015|,|NF79-51-580E-XX|,|256.43|,|208.02|,||,||,||,||,||,||,|Genuine Mazda MX-5 OEM 3rd Brake High Mount Lamp 2006-2015
|,|"Select Color for With Retractable Hard Top" "Select Here" "Stormy Blue" "Copper Red" "True Red" "Green" "Galaxy Gray" "Silver" "Brilliant Black add(+$160)"|-||-|"Select Color for Without Retractable Hard Top" "Select Here" "Green" "Silver" "Crystal White" "Meteor Gray" "Marble White" "True Red" "Jet Black" "Stormy Blue" "Sparkling Black" "Copper Red"|-||-|||-||GENUINE-MAZDA-OEM-AUXILARY-CONSOLE-INPUT-CABLE|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Genuine Mazda OEM Auxilary Console Input Cable 2016+|,|OEM-0000-8F-Z08|,|14.95|,|11.05|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Auxilary Console Input Cable 2016+
Genuine Mazda Auxilary Console Input Cable.This is the cable you can plug your iPod or MP3 player into your Mazda Auxilary Input in the center console. It is 2 foot long to give you enough but not to much cable. 3.5mm input plug.
|,|||-||GENUINE-MAZDA-OEM-BLACK-LOCKING-LUG-NUTS--SET-OF-4--2016|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda OEM Black Locking Lug Nuts (Set of 4) 2009-2019|,|0000-88-BLK-BP|,|84.95|,|71.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Black Locking Lug Nuts (Set of 4) 2009-2019
Mazda Black Locking Lug Nuts (Set of 4). Help protect your alloy wheels from theft. Unique lug pattern makes these locks virtually tamper-proof. Black finish. (4-lock set). Not for use with steel wheels.
|,|||-||GENUINE-MAZDA-OEM-BRUSHED-LICENSE-PLATE-2016|,|MIGIMOVIALL|,|Genuine Mazda OEM Brushed License Plate|,|OEM-0000-83-Z32|,|79.95|,|60.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Brushed License Plate
Genuine Mazda Brushed License Plate.These high quality stainless steel License Plate Frames are now available with highly detailed laser etched graphics. Universal fit and easy mounting application include complementing hardware hider caps to complete the look of the vehicle. Select Frames are available in brushed finish.
|,|||-||GENUINE-MAZDA-OEM-COLLAPSIBLE-CARGO-CARRIER-2016|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Genuine Mazda OEM Collapsible Cargo Carrier 2016|,|0000-8D-Z01|,|129.95|,|95.55|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Collapsible Cargo Carrier 2016
Mazda Collapsible Cargo Carrier. You've got a lot more to do than shop for groceries. This roomy carrier helps you pack in plenty of supplies, then lefts out and folds away flat to free up cargo space for your next errand.
|,|||-||GENUINE-MAZDA-OEM-FIRST-AID-KIT-2016|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Genuine Mazda OEM First Aid Kit 2012-2019|,|C9N1-W3-580|,|94.95|,|74.95|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM First Aid Kit 2012-2019
Genuine Mazda First Aid Kit. Our First Aid Kit puts first aid supplies where they are needed, when they are needed. FDA compliant. Includes bandages, gauze pads, non-adherent dressings, towelettes, adhesive tape, sting relief pads, antibiotic ointments, burn gel, vinyl gloves, instant cold pack, scissors, metal tweezers, poly bags, and a first aid manual. Contained in a convenient zippered nylon bag. Includes Bandages, Gauze Pads, Non-Adherent Dressings, Towelettes, Adhesive Tape, Sting Relief Pads, Antibiotic Ointments, Burn Gel, Vinyl Gloves, Instant Cold Pack, Scissors, Metal Tweezers, Poly Bags and a First Aid Manual. Contained in a Zippered Nylon Bag.
|,|||-||GENUINE-MAZDA-OEM-MOLY-OIL-0W20-1-QUART-2016|,|MIATA-MAINTENANCE-2016-|,|Genuine Mazda OEM Moly Oil 0w20 (1 quart) 2016|,|0000-G5-0W20-MQ|,|25.69|,|15.69|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Moly Oil 0w20 (1 quart) 2016
Genuine Mazda Moly Oil 0w20 (1 quart) This item only ships UPS
|,|||-||GENUINE-MAZDA-OEM-OIL-DRAIN-PLUG-AND-WASHER-2016|,|MIATA-MAINTENANCE-2016-|,|Genuine Mazda OEM Oil Drain Plug and Washer 2016-2017|,|FS50-21-249-9956-41-XXX|,|6.17|,|5.87|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Oil Drain Plug and Washer 2016-2017
Genuine Mazda Oil Drain Plug and Washer worn out? Replace it with a new one comes with a new washer also.
|,|||-||GENUINE-MAZDA-OEM-OIL-FILTER-WRENCH-A255-2016|,|MIATA-MAINTENANCE-2016-|,|Genuine Mazda OEM Oil Filter Wrench A255 2016|,|A255|,|12.00|,|10.20|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Oil Filter Wrench A255 2016
Genuine Mazda Oil Filter Wrench A255
|,|"Year and Model" "2016 MX-5 Miata"|-||-|||-||GENUINE-MAZDA-OEM-OIL-PAN-PLUG-W-WASHER-2016|,|MIATA-MAINTENANCE-2016-|,|Genuine Mazda OEM Oil Pan Plug w/ Washer 2016-2017|,|HE0310404-995641400|,|5.91|,|5.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Oil Pan Plug w/ Washer 2016-2017
Genuine Mazda Oil Pan Plug with Washer. On SKYACTIV engine oil pans, the hexagon-head drain plug (HE03-10-404) can be used in place of the socket-head drain plug (FS50-21-249). Alternatively, the socket-head drain plug (FS50-21-249) can be used in place of the hexagon-head drain plug (HE03-10-404).
|,|"Model and Year" "2016 MX-5 Miata"|-||-|||-||GENUINE-MAZDA-OEM-ROADSIDE-ASSISTANCE-KIT-2016|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Genuine Mazda OEM Roadside Assistance Kit 2012-2019|,|0000-8D-Z03|,|84.95|,|79.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Roadside Assistance Kit 2012-2019
Genuine Mazda Roadside Assistance Kit.This kit includes Carrying Bag, Jumper Cables, Duct Tape, Tire Pressure Gauge, Shop Towel, All-purpose Poncho, Pair of Work Gloves, Emergency Blanket, Hand Squeeze Flashlight, Multi-Function Tool, Bungee cord 24", Light Stick 6", Gojo Multi-purpose Towelette, Hazard Triangle, 12" w/instructions, First Aid Items 12 3/4 Adhesive Bandages, 3 BZK Towelettes, 3 Alcohol Prep Pads. Good for ALL years and models of cars
|,|||-||GENUINE-MAZDA-SKYACTIV-TECHNOLOGY-OIL-FILTER---DRAIN-PLUG-WASHERS-3-PACK-2016|,|MIATA-MAINTENANCE-2016-|,|Genuine Mazda OEM Skyactiv Technology Oil Filter & Drain Plug Washers (3 pack) 2016-2019+|,|OEM-1WPE-14-302|,|39.50|,|27.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Skyactiv Technology Oil Filter & Drain Plug Washers (3 pack) 2016-2019+
Genuine Mazda Skyactiv Technology 3 pack oil filter and 3 drain plug washers.Change your oil and filter every 5,000 to 7,500 with Mazda Genuine oil filters.
|,|||-||GENUINE-MAZDA-OEM-SKYACTIV-TECHNOLOGY-OIL-FILTER--DRAIN-PLUG-WASHER-AND-5-QUARTS-OF-MAZDA-0W20-MOLY-|,|MIATA-MAINTENANCE-2016-|,|Genuine Mazda OEM SKYACTIV TECHNOLOGY Oil Filter, Drain Plug Washer and 1 Gallon of Mazda 0w20 Moly Oil |,|PKPE01WOIL|,|75.42|,|65.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM SKYACTIV TECHNOLOGY Oil Filter, Drain Plug Washer and 1 Gallon of Mazda 0w20 Moly Oil
Mazda SKYACTIV® TECHNOLOGY Oil Filter, Drain Plug Washer and 1 Gallon of Mazda 0w20 Moly Oil. Everything you need to do an oil change your Mazda SKYACTIV® TECHNOLOGY. Mazda recommends every 5,000 to 7,500 miles for an oil and filter change. This item only ships UPS Mazda SKYACTIV-G 2.0 takes Oil and oil filter replacement 4.4 quarts of oil. Mazda SKYACTIV-G 2.5 takes Oil and oil filter replacement 4.8 quarts of oil.
|,|"Select Year" "Select Here" "2013" "2014" "2015" "2016"|-||-|"Shipping and Handling" "Add(+$24.95)"|-||-|||-||GENUINE-MAZDA-OEM-WHEEL-LOCKS-2016|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda OEM Wheel Locks 2016|,|0000-88-120D-BP|,|78.95|,|59.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda OEM Wheel Locks 2016
Genuine Mazda Wheel Locks. Help keep your alloy wheels from theft. Unique lug pattern makes these Mazda wheel locks virtually tamper proof. Set of 4.
|,|||-||GENUINE-MAZDA-OIL-PAN-DRAIN-PLUG-WASHER-LARGE|,|19MAMIMAVEAL|,|Genuine Mazda Oil Pan Drain Plug Washer (Large)|,|9956-41-800|,|3.45|,|2.93|,||,||,|0.000 |,||,||,||,|Genuine Mazda Oil Pan Drain Plug Washer (Large)
Mazda Oil Pan Drain Plug Washer (Large)
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997"|-||-|||-||GENUINE-MAZDA-PARTS1|,||,|Genuine Mazda Parts|,||,||,||,||,||,||,||,||,||,||,|||-||MAROASKIT|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Genuine Mazda Roadside Assistance Kit - Sale! |,|907-815|,|126.95|,|89.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Roadside Assistance Kit:
* Folding Triangle
* Flashlight
* 2 D Size Batteries
* Multi Tool
* Dial Tire Gauge
* Rain Poncho
* Emergency Blanket
* Shop Towel
* Pair Knit Gloves
All in a Fully Padded Nylon Bag. A must for all.
Perfect Gift for a loved one who has a older Miata.
|,|||-||GEOEMMAFRBUC3|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine OEM Mazda Front Bumper Cover 2004-2005 MAZDASPEED|,|OEM-NEY1-50-020|,|747.95|,|569.02|,||,||,|150.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover 2004-2005 MAZDASPEED
*VIN Required
|,|"Freight Cost" "add(+$295)"|-||-|||-||GENUINE-OEM-MAZDA-FRONT-BUMPER-COVER-NUT-CLIP-|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine OEM Mazda Front Bumper Cover Nut Clip 1990-2015|,|OEM-B455-56-135|,|2.01|,|1.99|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover Nut Clip 1990-2015
This Nut Clip is used for Mazda Miata front bumper cover for years 1990-2015.
PART CAN BE FOUND AS REFERENCE #15 IN ILLUSTRATION
Price is per nut clip. If you need qty. 6 Please update during check out to qty. 6.
|,|||-||GENUINE-OEM-MAZDA-FRONT-BUMPER-COVER-SEAL-2001-20051|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine OEM Mazda Front Bumper Cover Seal 2001-2005|,|OEM-N066-50-M15|,|1.77|,|1.75|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover Seal 2001-2005
This Cover Seal is for Mazda Miata Front Bumpers years 2001-205.
PART CAN BE FOUND AS REFERENCE #11 IN ILLUSTRATION
Price is per cover seal. If you need qty. 2 please update during check out to qty. 2.
|,|||-||GENUINE-OEM-MAZDA-FRONT-BUMPER-COVER-SEAL-2001-2005|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine OEM Mazda Front Bumper Cover Seal 2001-2005|,|OEM-N066-50-M25|,|1.77|,|1.69|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover Seal 2001-2005
This Cover Seal is used for the front bumper cover for Mazda Miata years 2001-2005
PART CAN BE FOUND AS REFERENCE #10 IN ILLUSTRATION
Price is per cover seal. If you need qty. 2 please update during check out to qty. 2.
|,|||-||GENUINE-OEM-MAZDA-FRONT-BUMPER-COVER-SLIDE-2001-2005|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine OEM Mazda Front Bumper Cover Slide 2001-2005|,|OEM-N066-50-E13A|,|3.71|,|3.69|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Cover Slide 2001-2005
This bumper cover slide is for Mazda Miata front bumper years 2001-2005.
PART CAN BE FOUND AS REFERENCE #13 IN ILLUSTRATION
Price is per cover slide. If you need qty. 4 Please update during check out to qty. 4.
|,|||-||GENUINE-OEM-MAZDA-FRONT-BUMPER-FASTENER-1990-2005|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine OEM Mazda Front Bumper Fastener 1990-2005|,|OEM-BF67-50-033|,|3.95|,|2.92|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Front Bumper Fastener 1990-2005
Fastener is used for the front Miata Bumpers.
Fit's Mazda Miata Years 1990-2005
PART CAN BE FOUND AS REFERENCE #2 IN ILLUSTRATION
Price is per bumper fastener. If you need qty. 2 please update during check out to qty. 2.
|,|||-||GENUINE-OEM-MAZDA-GRILLE-COVER-2001-2005|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine OEM Mazda Miata Grille Cover 2001-2005|,|OEM-NA01-50-101A|,|5.95|,|4.79|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Miata Grille Cover 2001-2005
Product Description:
Front Bumper Clip
Fits Mazda Miata years 1990-2005
PART CAN BE FOUND AS REFERENCE #17 IN ILLUSTRATION
Price is per grille cover. If you need qty. 3 Please update during check out to qty. 3.
|,|||-||NA01-59-604B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine OEM Mazda Miata Guide Channel 1990-1997|,|NA01-59-603D|,|49.99|,|38.95|,||,||,||,||,||,||,|Genuine OEM Mazda Miata Guide Channel 1990-1997
Part can be found as reference #9 in illustration
|,|||-||GENUINE-OEM-MAZDA-MIATA-HOOD-1999-2005|,|MIATA-OEM-EXTERIOR-PARTS-1999-2005|,|Genuine OEM Mazda Miata Hood 1999-2005|,|NCY0-52-31XK|,|1,044.64|,|849.02|,||,||,|150.000 |,||,||,||,|Genuine OEM Mazda Miata Hood 1999-2005
These come primered.
|,|"Freight Cost" "add(+$349)"|-||-|||-||GEOEMMAMIOUT|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Genuine OEM Mazda Miata Outer Tie Rod Boots 1990-1997|,|OEM-NA01-32-12X|,|123.10|,|111.40|,||,||,|0.000 |,||,||,||,|Genuine OEM Mazda Miata Outer Tie Rod Boots 1990-1997
*#6 shown in diagram.
**Price is per boot.
|,|||-||GEHUBCINJ|,|OWNERS-SHOWCASE|,|George Hubel
Cinnaminson NJ |,|newitem152763594|,||,||,||,||,||,||,||,||,|I just received my speed grill which I ordered from you on February 25th 2008. I have to commend you guys, This is the best money I have spent thus far on my 1990 Mazda Miata. The installation was straight forward and was installed in literally five minutes!!! What a difference. I cannot believe I agonized over the decision to purchase this grill for one second. Thanks again, I will be sure to use you guys in the future!
George Hubel
|,|||-||GHIBLISTYLE|,||,|Ghibli Style|,|ghiblistyle|,||,||,||,||,||,||,||,||,||,|||-||ACCESSORIES-GIFTS---ACCESSORIES|,||,|GIFTS & ACCESSORIES|,||,||,||,||,||,||,||,||,||,||,|||-||GLPABAINFORR|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Glass Packed Baffle Insert for RoadsterSport DUALS and RoadsterSport Q. 2006-2015|,|GWR-60-1324B|,|55.00|,|49.00|,||,||,|0.000 |,||,||,||,|Glass Packed Baffle Insert for RoadsterSport DUALS and RoadsterSport Q. 2006-2015
Glass Packed baffle insert for RoadsterSport Duals and RoadsterSport Q...ONLY. Does not fit RoadsterSport RACE or other mufflers! RoadsterSport MX-5 Miata mufflers ship with removable baffles but for those that want to tame the sound even more we offer these glass packed baffles. Each unit is about 7 inches long and acts like a small additional muffler that slides into the tip of your RoadsterSport MX-5 Miata Muffler. All stainless steel construction for years of driving pleasure. This is for Miata owners who want to bring the sound DOWN just a few more db for longer trips, etc. Uses same retaining screw as stock baffles (remember to oil those threads first every time you want to pull it out). Sold individually so if you want two for your MX-5 Miata RoadsterSport DUALS or Q then order two (Note that production unit sits one inch further up the pipe such that you CANNOT SEE it unless you are on your knees behind the car).
|,|"Drop-ship fee" "add (+$9)"|-||-|||-||60-1324T|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Glass Packed Baffle Insert for RoadsterSport SuperStreet Twin 2016-2020|,|60-1324T|,|55.00|,|49.00|,||,||,||,||,||,||,|Glass Packed Baffle Insert for RoadsterSport SuperStreet Twin 2016-2020
ONE Glass Packed baffle insert for RoadsterSport Twin Tips ONLY. Does not fit RoadsterSport RACE or other mufflers!
RoadsterSport MX5 Miata mufflers ship with removable baffles but for those that want to tame the sound even more we offer these glass packed baffles. Each unit is about 7 inches long and acts like a small additional muffler that slides into the tip of your RoadsterSport MX5 Miata Muffler. Stainless steel construction and stuffed with fiberglass sound absorbing materials.
This is for Miata owners who want to bring the sound DOWN just a few more db for longer trips, etc. Uses same retaining screw as stock baffles (remember to oil those threads first every time you want to pull it out). Sold individually so if you want two for your MX5 Miata RoadsterSport SuperStreet Twin Tip then order two.
SOLD PER BAFFLE...SO PLEASE ORDER TWO IF YOU WANT TWO!
|,|"Drop-ship fee" "add (+$9)"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-GO-MIATA|,|SHOP-BY-TOP-MIATA-BRANDS|,|GO MIATA|,||,||,||,||,||,||,||,||,||,||,|||-||GOMIATABOOTBAG|,|SOFT-TOP|,|Go Miata Boot Bag - SALE!|,|801-165|,|39.99|,|29.02|,||,||,|0.000 |,||,||,||,|
Don't just throw your Miata's boot in your trunk when you can place it neatly into your very own Miata Boot Bag!
Zips closed and helps keep your expensive boot protected from getting damaged in your trunk.
Made in USA
CORDURA® Brand Points
CORDURA® brand fabric is a high-performance, super-durable material found in a wide variety of premium products.
CORDURA® fabrics have influenced the outdoor market for over thirty years, which gives them an exceptional advantage over most non-branded fabrics in the marketplace where durability is key.
With experience as an industry leader, INVISTA's CORDURA® brand fabrics have exceptional durability, wide-ranging versatility and can be found in many premium products for the outdoor industry.
From backpacks and luggage to footwear, apparel and upholstery, INVISTA's CORDURA® fabrics add stylish durability and lightweight strength to almost everything they are made of.
CORDURA® fabric is designed for living and built to last, providing exceptional resistance to tears, scuffs and abrasions.
For maximum durability and for toughness that lasts and lasts, there's only one brand that can take it all: the CORDURA® brand.
|,|||-||SAVE30|,||,|Go Miata Coupon Information|,||,||,||,|Go Miata Coupon Information|,||,||,||,||,||,|Go Miata Coupon Information
SAVE $40.00 off any order of $399.99 or more! ($399.99 before tax & shipping. Exclude MOMO, Hard Dog, and RoadsterSport products). At checkout, simply enter coupon code: SAVE40 and you'll get $40.00 off your order! (This coupon offer may not be combined with any other offers, coupons or discounts)
This Coupon offer is at the point of purchase and cannot be added with other orders in the past or future. Nor does this apply with other item, coupons, offers, promotions, or discounts.
This Go Miata Coupon expires 10/31/2017
If you need help, feel free to call our customer service line at 1-619-466-4282.
|,|||-||GOMICUCLWI|,||,|Go Miata Custom Classic Windblocker|,|gomicuclwi|,||,||,||,||,||,||,||,||,|Picture of our Go Miata Custom Classic Windblocker
|,|||-||PHOFCUWI|,||,|Go Miata Custom Wave Windblocker|,|phofcuwi|,||,||,||,||,||,||,||,||,||,|||-||GOMDIAMGRIL91|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Go Miata Diamond Stainless Steel Miata Grill 1990-1997|,|501-121|,|199.99|,|129.95|,||,||,|0.000 |,||,||,||,|Go Miata Diamond Stainless Steel Miata Grill 1990-1997
Our GoMiata Diamond Grilles are made of the finest stainless steel mesh available and will last for many years. While their aesthetic beauty is unparalleled on the market today, the grilles are also highly functional, protecting your radiator and condensor from damage.
Don't settle for cheap imitations, this is the genuine article and fits perfectly!
NOTE: These are not compatible with a bra/mask.
|,|||-||GOMDIAMGRIL9|,|NBBODYSTYLING|,|Go Miata Diamond Stainless Steel Miata Grill 1999-2005|,|501-123|,|199.99|,|129.95|,||,||,|0.000 |,||,||,||,|Go Miata Diamond Stainless Steel Miata Grill 1999-2005
Our GoMiata Diamond Grilles are made of the finest stainless steel mesh available and will last for many years. While their aesthetic beauty is unparalleled on the market today, the grilles are also highly functional, protecting your radiator and condensor from damage.
Don't settle for cheap imitations, this is the genuine article and fits perfectly!
NOTE: These are not compatible with a bra/mask.
|,|"Select Year" "1999-2000" "2001-2005"|-||-|||-||GOGICE2|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Go Miata Gift Cerftificate for $500 - FREE SHIPPING!|,|GC-500|,|500.00|,||,||,||,|0.000 |,||,||,||,|The best gift for the Miata driver! Your Miata owner will love you forever when you get them a $500 Go Miata Gift Certficate! Let them choose from the wide variety of Miata goodies at Go Miata!
Go Miata now has E-Mail Gift Certificates! This E-Mail Gift Certificates saves you Money and Time. These Go Miata Gift Certificates comes with detailed instructions on how to use the gift certificates either online or by calling our customer service line any time of the day.
Give the gift you know they will love - A Go Miata Gift Certificate!
|,|||-||GOGICE|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Go Miata Gift Certificate for $100 - FREE SHIPPING!|,|GC-100|,|100.00|,||,||,||,|0.000 |,||,||,||,|The best gift for the Miata driver! Let them choose from the wide variety of Miata goodies at Go Miata!
Go Miata now has E-Mail Gift Certificates! This E-Mail Gift Certificates saves you Money and Time. These Go Miata Gift Certificates comes with detailed instructions on how to use the gift certificates either online or by calling our customer service line any time of the day.
Give the gift you know they will love - A Go Miata Gift Certificate!
|,|||-||GOMGIFCER|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Go Miata Gift Certificate for $25 - FREE SHIPPING!|,|GC-25|,|25.00|,||,||,||,|0.000 |,||,||,||,|The best gift for the Miata driver! Let them choose from the wide variety of Miata goodies at Go Miata!
Go Miata now has E-Mail Gift Certificates! This E-Mail Gift Certificates saves you Money and Time. These Go Miata Gift Certificates comes with detailed instructions on how to use the gift certificates either online or by calling our customer service line any time of the day.
Give the gift you know they will love - A Go Miata Gift Certificate!
|,|||-||GOGICE1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Go Miata Gift Certificate for $250 - FREE SHIPPING!|,|GC-250|,|250.00|,||,||,||,|0.000 |,||,||,||,|The best gift for the Miata driver! Knock their socks off with a $250 Gift Certificate and let them choose from the wide variety of Miata goodies at Go Miata!
Go Miata now has E-Mail Gift Certificates! This E-Mail Gift Certificates saves you Money and Time. These Go Miata Gift Certificates comes with detailed instructions on how to use the gift certificates either online or by calling our customer service line any time of the day.
Give the gift you know they will love - A Go Miata Gift Certificate!
|,|||-||GOMIGICEFOR3|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Go Miata Gift Certificate for $30 - FREE SHIPPING!|,|GC-30|,|30.00|,||,||,||,|0.000 |,||,||,||,|The best gift for the Miata driver! Let them choose from the wide variety of Miata goodies at Go Miata!
Go Miata now has E-Mail Gift Certificates! This E-Mail Gift Certificates saves you Money and Time. These Go Miata Gift Certificates comes with detailed instructions on how to use the gift certificates either online or by calling our customer service line any time of the day.
Give the gift you know they will love - A Go Miata Gift Certificate!
|,|||-||GOGICE50|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Go Miata Gift Certificate for $50 - FREE SHIPPING!|,|GC-50|,|50.00|,||,||,||,|0.000 |,||,||,||,|The best gift for the Miata driver! Let them choose from the wide variety of Miata goodies at Go Miata!
Go Miata now has E-Mail Gift Certificates! This E-Mail Gift Certificates saves you Money and Time. These Go Miata Gift Certificates comes with detailed instructions on how to use the gift certificates either online or by calling our customer service line any time of the day.
Give the gift you know they will love - A Go Miata Gift Certificate!
|,|||-||GOGTSTBAR|,||,|Go Miata GT Style Bar|,|507-325|,|300.00|,|249.00|,|This item has been discontinued|,||,|15.000 |,||,||,||,|We are pleased and proud to introduce the aggressive new GoMiata GT Style Bar.
FITS ALL YEARS OF MIATA!
These new style bars feature: 10 minute no cut install, full seat travel, chrome manufacturing and terrific pricing!
These bars have a swept back design that compliments the seat profile and allows for usage of the factory windblocks as well as aftermarket hard boots! The chrome is TIG welded and hand polished to look like and shine like jewelry!
These are compatible with factory hard tops, all plastic rear window soft tops and factory glass rear window soft tops. The soft boot still fits perfectly.
Custom GoMiata windblocks are available for both bars for an additional $59.99.
THESE STYLE BARS ARE FOR ASTHETICS ONLY AND DO NOT PROVIDE ANY ROLLOVER PROTECTION.
|,|"Please Select" "Without Windblocker" "With Windblocker add(+$59.00)"|-||-|||-||HARDTOPCART|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-HARDTOP-2016|,|Go Miata Hard Top Cart|,|505-210|,|299.99|,|198.02|,||,||,|5.000 |,||,||,||,|* Stores Hard Top Upright To Mazimize Space
* Light weight
* 4 Wheels Make it Easy To Maneuver
* Front Wheels Lock To Secure The Unit
* Folds Flat For Easy Storage
* Padding To Protect The Hard Top
* Durable Steel Construction
* Black Powder Paint
(Actual Hard Top not included)
|,|||-||94MIPEPA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Go Miata Performance Package (1994-1997)|,|235-501|,|1,799.99|,|1,635.02|,||,||,|100.000 |,||,|sdfhsdfh|,||,|Have you been wondering about the best way to increase the performance of your Miata?
Well, wonder no more! Thanks to the suggestions from customers like you, we have put together Packages that we feel work great together and save you money over buying each item seperately!
This great package will take your Miata to a whole new level.
We've now put all the best performance parts together!
Here's what you get!
* 156-501 Racing Beat High Performance Intake
* 156-006 Racing Beat 4-1 Header
* 156-437/8 Racing Beat Power Pulse Connecting Pipe
* 201-208 Magnecore High Performance Ignition Wires
* 156-466 Racing Beat Dual Tip Exhaust
Due to the size of the exhaust items, additional shipping charges will be reflected in your total.
|,|"Select Year" "1994-1995" "1996-1997"|-||-|"Shipping Fee" "add(+195)"|-||-|||-||19MIPEPA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Go Miata Performance Package (1999-2004)|,|235-502|,|1,699.99|,|1,425.02|,||,||,|100.000 |,||,||,||,|Have you been wondering about the best way to increase the performance of your Miata?
Well, wonder no more! Thanks to the suggestions from customers like you, we have put together Packages that we feel work great together and save you money over buying each item seperately!
This great package will take your Miata to a whole new level.
We've put all the best performance parts together in one package!
Here's what you get!
* 208-520 AEM Performance Intake System
* 156-007/8 Racing Beat 4-1 Header
* 201-208 Magnecore High Performance Ignition Wires
* 156-467 Racing Beat Dual Tip Exhaust
Due to the size of the exhaust components, additional shipping charges will be reflected in your total.
|,|"Select Year" "Select Here" "1999-2000" "2001-2005"|-||-|"Shipping & Handling" "add(+$185)"|-||-|||-||NSEARCH|,||,|Go Miata Product Search|,||,||,||,||,||,||,||,||,||,||,|||-||STIPEPA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Go Miata Stage I Performance Package (1990-1993)|,|191-101|,|1,059.99|,|985.02|,||,||,|90.000 |,||,|retywery|,||,|A fantastic way to add 12-15 HP to your Miata, our Go Miata Stage I Package includes:
* 156-500 Racing Beat Cold Air Intake
* 156-437 Racing Beat Midpipe
* 201-208 Magnecore High Performance Ignition Wires
* 156-451 Racing Beat Power Pulse Miata Muffler OR 156-466 Racing Beat Dual Tip Miata Exhaust
|,|"Select Exhaust Option" "Single Tip" "Dual Tip add(+$80.00)"|-||-|"Shipping & Handing" "add (+$185)"|-||-|||-||PEPANE|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Go Miata Stage II Performance Package (1990-1993)|,|235-500|,|1,699.99|,|1,525.02|,||,||,|150.000 |,||,|agadsg|,||,|Have you been wondering about the best way to increase the performance of your Miata?
Well, wonder no more! Thanks to the suggestions from customers like you, we have put together Packages that we feel work great together and save you money over buying each item seperately!
This great package will take your Miata to a whole new level.
We've now put all the best performance parts together!
Here's what you get!
* 156-500 Racing Beat Cold Air Intake
* 156-005 Racing Beat 4 to 1 Header
* 156-437 Racing Beat Power Pulse Connecting Pipe
* 201-208 Magnecore High Performance Ignition Wires
* 156-451 Racing Beat Power Pulse Miata Muffler OR 156-466 Racing Beat Dual Tip Miata Exhaust
Due to the size of the exhaust components, additional shipping charges will be reflected in your total.
|,|Select "Racing Beat Power Pulse Miata Muffler" "RB Dual Tip Miata Exhaust add(+$80)"|-||-|"Shipping fee" "add(+$195)"|-||-|||-||CHLIPLFRWIMI1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Gold License Plate Frame with Miata Miata MX-5 Logo|,|LF-MIA-EG|,|49.95|,|39.99|,||,||,|0.000 |,||,||,||,|Mazda Miata “Miata MX-5” Metal License Plate Frames - Factory Style Letters.
Finished in mirrored gold with engraved lettering that is filled with UV resistant black resin.
Each frame includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship.
Made in the USA with a Lifetime Warranty.
|,|||-||GOMCORHEAD1|,||,|GoMiata Corporate Headquarters|,|gomcorhead1|,||,||,||,||,||,||,||,||,||,|||-||GRLABHOTX|,|OWNERS-SHOWCASE|,|Gregory Lawson
Houston, TX|,|123-111|,||,||,||,||,||,||,||,||,|Thanks for all you help!
Ok, so now that I'm waiting to have my Big brakes put on and my 10yr old battery just took its last breath, I wanted to show off the dual exhaust and the ttbar with shield, pedals (not clips), shift knob, chrome strikers and trim rings, clear markers. Of course you cant see the racing beat springs, agx adjustable struts, hard to see the grill though. And of course if my girlfriend won't ride with me, my Pug-Jojo always will. So now with the brakes the new stage 2 clutch, fidenza flywheel will be added this week. I'm installing a new stereo w subwoofer after it gets back. All in perfect time for Houston weather and All day top down status!!
I love my Miata!!
Gregory
Houston, TX
|,|||-||GROUP-BUY|,||,|Group Buy|,||,||,||,||,||,||,||,||,||,||,|||-||HRPERLOWSPRI|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|H & R Race 1.5" Lowering Springs 1990-1997|,|306-306|,|289.00|,|248.00|,||,||,|0.000 |,||,||,||,|If you are looking for a very high performance spring and serious drop of 1.5" look no further than these H & R Springs.
These springs are over 50% stiffer than stock and are manufactured for the Miata enthusiast who craves precision handling, aggressive performance and supreme style. For optimum handling, we recommend that these dynamic race springs be paired with high quality sport-tuned shocks.
H & R Springs are all built in-house in Germany to the highest standards. Theses springs are precision wound and pre-set using the exclusive H & R "Super Blok" System. This system cycles the spring coils so the springs can never set or sag. Never!
Complete set of 4 springs.
|,|||-||HRRAC15LOWSP|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|H & R Race 1.5" Lowering Springs 1999-2005|,|306-307|,|289.99|,|249.95|,||,||,|0.000 |,||,||,||,|These springs are over 50% stiffer than stock and are manufactured for the Miata enthusiast who craves precision handling, aggressive performance and supreme style. For optimum handling, we recommend that these dynamic race springs be paired with high quality sport-tuned shocks.
H & R Springs are all built in-house in Germany to the highest standards. Theses springs are precision wound and pre-set using the exclusive H & R "Super Blok" System. This system cycles the spring coils so the springs can never set or sag. Never!
Complete Set of 4 Springs
|,|||-||FIEXHA|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|H3R Performance Halguard 2.5 lb Fire Extinguisher Chrome P/N HG250C - Sale! |,|HDG-FH1|,|475.05|,|395.95|,||,||,|0.000 |,||,||,||,|H3R Performance Halguard 2.5 lb Fire Extinguisher Chrome P/N HG250C
Description:
Fire Extinguisher - Halguard - Halotron 1 - Class ABC - 1B C Rated - 2.5 lb - Mounting Bracket - Steel - Chrome - Each
Fire Extinguisher - Halguard - 1B/C Rated - 2.5 lb - Mounting Bracket - Steel - Chrome - Each
|,|||-||HALO|,|SHOP-BY-TOP-MIATA-BRANDS|,|HALO|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-HANDLING---SUSPENSION|,||,|HANDLING & SUSPENSION|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-HANDLING---SUSPENSION-1999-2005|,|PARTS---PERFORMANCE-HANDLING---SUSPENSION|,|HANDLING & SUSPENSION (1999-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-HANDLING---SUSPENSION-2006-2009|,|PARTS---PERFORMANCE-HANDLING---SUSPENSION|,|HANDLING & SUSPENSION (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-HANDLING---SUSPENSION-1990-1997|,|PARTS---PERFORMANCE-HANDLING---SUSPENSION|,|HANDLING & SUSPENSION (1990-1997)|,||,||,||,||,||,||,||,||,||,||,|||-||HATH|,||,|Happy Thanksgiving from the GoMiata Family!|,|newitem82611994|,||,||,||,||,||,||,||,||,|From the GoMiata Family to yours, we wish you a Very Happy Thanksgiving!
We'd especially like to take this opportunity to give thanks to our wonderful customers! Thank you for making GoMiata the #1 Source for Miata Parts and Accessories online.
|,|||-||HADOGHIVEREH|,|BLACKFRIDAYSALE|,|Hard Dog "Hide Away" Vertical Receiver Hitches 1990-1997|,|HDG-R1H|,|399.99|,|254.95|,||,||,|5.000 |,||,||,||,|Hard Dog Hide Away Vertical Receiver Hitches 1990-1997(Removable Receiver Included )
Hard Dog Miata / MX-5 receiver hitches are suitable for tire carriers, bike racks and small trailers.
Our superior mounting systems provide the strongest attachment point available.
Features include:
* Class 1 Standard 1-1/4" receiver
* Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than an MX-5 should haul)
* Black Powdercoat finish
* Hitch pin and required mounting hardware included
* Safety chain anchors
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||HADOGHAWVERE|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-1999-2005|,|Hard Dog "Hide Away" Vertical Receiver Hitches 1999-2005 - Sale! |,|HDG-R2H|,|379.99|,|274.95|,||,||,|5.000 |,||,||,||,|Hard Dog Hide Away Vertical Receiver Hitches 1999-2005
Hard Dog Miata / MX-5 receiver hitches are suitable for tire carriers, bike racks and small trailers.
Our superior mounting systems provide the strongest attachment point available.
Features include:
* Class 1 Standard 1-1/4" receiver
* Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than an MX-5 should haul)
* Black Powdercoat finish
* Hitch pin and required mounting hardware included
* Safety chain anchors
For Miata Years: 1999, 2000, 2001, 2002, 2003, 2004 and 2005
Do not exceed tow capacity of vehicle
|,|"Shipping & Handling" "add(+$89)"|-||-|||-||HADOGHIVEREH1|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2006-2012|,|Hard Dog "Hide Away" Vertical Receiver Hitches 2006-2015 - Sale! |,|HDG-R3H|,|379.99|,|304.95|,||,||,|5.000 |,||,||,||,|Hard Dog Hide Away Vertical Receiver Hitches 2006-2015
Hard Dog Miata / MX-5 receiver hitches are suitable for tire carriers, bike racks and small trailers.
Our superior mounting systems provide the strongest attachment point available.
Features include:
* Class 1 Standard 1-1/4" receiver
* Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than an MX-5 should haul)
* Black Powdercoat finish
* Hitch pin and required mounting hardware included
* Safety chain anchors
For Miata Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Do not exceed tow capacity of vehicle
|,|"Shipping cost" "add(+$109)"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-HARD-DOG|,|SHOP-BY-TOP-MIATA-BRANDS|,|Hard Dog Fabrication|,||,||,||,||,||,||,||,||,||,||,|||-||HAWK-BLUE-9012-RACE-FRONT-PADS-|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK BLUE 9012 Race Front Pads / MotorSport USE Olny!!! Front Pad Set Operating Temp: (250F-1000F)|,|HB522E-565|,|188.19|,|138.45|,||,||,||,||,||,||,|HAWK BLUE 9012 Race Front Pads / MotorSport USE Olny!!!
Front Pad Set Operating Temp: (250F-1000F)
Hawk Performance BLUE 9012 Compound Features are Medium/High torque brake, Low pad and rotor wear with good brake modulation. Operating Temperature: (250F-1000F) Race Use Only!
* Low to Mid Temp
* Low to Intermediate Torque
* Excellent Modulation
* Road and Rally Racing
* #1 Choice for SCCA drivers
For Miata Years: 2006-2014
|,|||-||HAWK-BLUE-9012-RACE---MOTORSPORT-USE-OLNY----PAD-SET-OPERATING-TEMP---250F-1000F-|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK BLUE 9012 Race Rear Pads / MotorSport USE Olny!!! Rear Pad Set Operating Temp: (250F-1000F)|,|HB523E-539|,|188.19|,|131.45|,||,||,||,||,||,||,|HAWK BLUE 9012 Race Rear Pads / MotorSport USE Olny!!! Rear Pad Set Operating Temp: (250F-1000F)
Hawk Performance BLUE 9012 Compound Features are Medium/High torque brake, Low pad and rotor wear with good brake modulation. Operating Temperature: (250F-1000F) Race Use Only!
* Low to Mid Temp
* Low to Intermediate Torque
* Excellent Modulation
* Road and Rally Racing
* #1 Choice for SCCA drivers
For Miata Years: 2006-2014
|,|||-||HAWK-FRONT-PERFORMANCE-STREET-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK Front Performance Street Brake Pads 2006-2014|,|HB522R-565|,|121.10|,|108.45|,||,||,||,||,||,||,|HAWK Front Performance Street Brake Pads 2006-2014
“THE MASTER OF FASTER” The racers never ending goal for greatness, the art of perfection is now complemented by the latest in technology. Racing technology continues to find its way to the street, and at Hawk Performance we have found a way to make you get closer to that goal!
This was the motivation behind the development of the new Hawk High Performance Street/Race compound. We built for you to go racing on it. Dive into the next tight corner, brake later and edge past your competition, but don't put it on a trailer after you lapped the field, take your helmet off and drive to you celebratory dinner. The new Street/Race compound from Hawk Performance truly gives you that ability.
|,|||-||HAWK-HP-PLUS-AUTOCROSS---TRACK-DAY-FRONT-PAD|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK HP Plus Autocross / Track Day Front Pad Set Operating Temp: (100F-800F)|,|HB522N-565|,|132.67|,|112.45|,||,||,||,||,||,||,|HAWK HP Plus Autocross / Track Day Front Pad Set Operating Temp: (100F-800F)
Hawk Performance HP PLUS compound can take the heat at the Track and get you home safely without having to change your pads. This compound was designed for the serious street and autocross enthusiast. Warning! Due to the dramatic friction levels, the user may notice increased noise, dust and pad and rotor wear. Key Feature Extremely high friction output, Race worthy for autocross, Race worthy for club racing events, Race worthy for club racing events, Elevated temperature resistance. Operating Temperature: (100F-800F)
* Wide Temp Range
* Exceptional Stopping Performance
* Autocross / Club Track Day Events
* Designed to get you to and from the track without requiring brake change.
For Miata Years 2006-2014
|,|||-||HAWK-HP-PLUS-AUTOCROSS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK HP Plus Autocross / Track Day Rear Pad Set Operating Temp: (100F-800F)|,|HB523N-539|,|128.50|,|107.45|,||,||,||,||,||,||,|HAWK HP Plus Autocross / Track Day Rear Pad Set Operating Temp: (100F-800F)
Hawk Performance HP PLUS compound can take the heat at the Track and get you home safely without having to change your pads. This compound was designed for the serious street and autocross enthusiast. Warning! Due to the dramatic friction levels, the user may notice increased noise, dust and pad and rotor wear. Key Feature Extremely high friction output, Race worthy for autocross, Race worthy for club racing events, Race worthy for club racing events, Elevated temperature resistance. Operating Temperature: (100F-800F)
* Wide Temp Range
* Exceptional Stopping Performance
* Autocross / Club Track Day Events
* Designed to get you to and from the track without requiring brake change.
For Miata Years 2006-2014
|,|||-||60-12492NDF|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Hawk HP PLUS Brake Pad - MX5 Front 2016-2021|,|60-12492NDF|,|289.05|,|229.00|,||,||,||,||,||,||,|Hawk HP PLUS Brake Pad - MX5 Front 2016-2021
Performance Street/Autocross
Custom made for us for the 2016+ MX5. The most popular autocross compound among Miatas.
The HP Plus is the brake pad for the dual purpose Miata owner.
HP PLUS Performance Miata brake pads are streetable and yet capable of handling hard use. The HP Plus material is a high-friction compound that can handle the temperatures of autocross and even track days for drivers in the novice or intermediate groups.
Intermediate to advanced drivers should look to a more track-focused pad for racetrack use.
Warning! There is no "free lunch" with brake pads! Higher friction and performance comes at the cost of rotor wear, noise, and dust. For the dedicated Miata street user we strongly recommend staying with Hawk HPS or Porterfield R4S Miata brake pads instead.
Brian's Miata brake pad application notes: this is the Miata brake pad for the legitimate dual purpose Miata user, the owner that needs something that can stay in his Miata from street, to autocross, to track days and home again.
These pads are made to order, please allow 1-2 weeks.
*** Product images may differ from actual product appearance ***
|,|"Select Option" "Select Here" "Without Brembo" "With Brembo add(+$20)"|-||-|||-||HAHPSBRPARES3|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Hawk HPS Brake Pads - Rear Set 2006-2014|,|HAW-HPS8|,|119.99|,|92.05|,||,||,|0.000 |,||,||,||,| HPS - High Performance Street Miata Brake Pads, Rear Set 2006-2014
Superior Stopping Power
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.
|,|||-||HAHPSBRPAFRS|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Hawk HPS Miata Brake Pads - Front Set 1990-1993|,|HAW-HPS1|,|99.99|,|79.98|,||,||,|0.000 |,||,||,||,| HPS - High Performance Street Miata Pads 90-93
Superior Stopping Power
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.
|,|||-||HAHPSBRPARES|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Hawk HPS Miata Brake Pads - Rear Set 1990-1993|,|HAW-HPS2|,|99.99|,|79.98|,||,||,|0.000 |,||,||,||,| HPS - High Performance Street Miata Pads Rear 90-93
Superior Stopping Power
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.
|,|||-||HB522G-565|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK Performance DTC-60 TRACK ONLY Front Pads 2006-2014|,|HB522G-565|,|142.99|,|124.95|,||,||,||,||,||,||,|HAWK Performance DTC-60 TRACK ONLY Front Pads 2006-2014
For over 15 years, Hawk Performance has dominated the racetrack by providing champions with cutting-edge friction materials. Whether you are looking to improve your braking ability during the next lapping day or looking to make your move on the final lap, Hawk has you covered with a wide array of Motorsport Compound Pads.
SPECIAL NOTE: Due to the aggressive nature of the Hawk Performance Motorsports Compound pads, they are not recommended for street use.
DTC-60
Temp Range: 400-1,600 degrees Fahrenheit
Torque: High
Recommended Use: Hawk's latest formulation for excellent torque control and modulation for wheel-to-wheel competition. DTC-60 can be combined with the DTC-70 when less torque is desired on the rear axle. Road race and asphalt circle track cars.
|,|||-||HPS-PERFORMANCE-FRONT-CERAMIC-BRAKE-PAD-|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Hawk Performance Front Ceramic Brake Pad (2006-2014)|,|HB522F-565|,|109.03|,|91.45|,||,||,||,||,||,||,|Hawk Performance Front Ceramic Brake Pad (2006-2014)
Hawk Performance HPS Ferro-Carbon compound brake pads provide advanced braking characteristics to enhance the driving experience that motorists are looking for. This unique compound combines the safety and quality of aerospace braking technology that is used in motorsports. Hawk Performance HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most Original Equipment or standard replacement pads. This makes them more responsive and durable than most standard original brake pads.
|,|||-||HPS-PERFORMANCE-CERAMIC-BRAKE-PAD-|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Hawk Performance Rear Ceramic Brake Pad (2006-2014)|,|HB523F-539|,|107.27|,|88.45|,||,||,||,||,||,||,|Hawk Performance Rear Ceramic Brake Pad (2006-2014)
Hawk Performance HPS Ferro-Carbon compound brake pads provide advanced braking characteristics to enhance the driving experience that motorists are looking for. This unique compound combines the safety and quality of aerospace braking technology that is used in motorsports. Hawk Performance HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most Original Equipment or standard replacement pads. This makes them more responsive and durable than most standard original brake pads.
|,|||-||HAWK-PERFORMANCE-STREET-5-0-FRONT-BRAKE-PADS--2006-2014-|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK Performance Street 5.0 Front Brake Pads (2006-2014)|,|HB522B-565|,|106.76|,|97.45|,||,||,||,||,||,||,|HAWK Performance Street 5.0 Front Brake Pads (2006-2014)
The new High Performance Street 5.0 Pads are a Ferro-Carbon compound brake pads that provide advanced braking characteristics to enhance the driving experience. This new compound combines the safety and quality of aerospace design partnered with the braking technology of motorsports, the results are shorter stopping distances, improved performance under heavy braking conditions and street car friendly characteristics.
Hawk Performance High Performance Street 5.0 Pads offer more stopping power and get resistance to brake fade, elevating your street car’s performance. This makes them more responsive and durable than most standard original brakes and makes Hawk Performance High Performance Street 5.0 Pads the best choice to increase your braking performance and reliability while being both cost conscious and “Made in the USA”.
|,|||-||HAWK-PERFORMANCE-STREET-5-0-REAR-BRAKE-PADS---|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK Performance Street 5.0 Rear Brake Pads (2006-2014)|,|HB523B-539|,|109.80|,|94.45|,||,||,||,||,||,||,|HAWK Performance Street 5.0 Rear Brake Pads (2006-2014)
The new High Performance Street 5.0 Pads are a Ferro-Carbon compound brake pads that provide advanced braking characteristics to enhance the driving experience. This new compound combines the safety and quality of aerospace design partnered with the braking technology of motorsports, the results are shorter stopping distances, improved performance under heavy braking conditions and street car friendly characteristics.
Hawk Performance High Performance Street 5.0 Pads offer more stopping power and get resistance to brake fade, elevating your street car’s performance. This makes them more responsive and durable than most standard original brakes and makes Hawk Performance High Performance Street 5.0 Pads the best choice to increase your braking performance and reliability while being both cost conscious and “Made in the USA”.
|,|||-||---HAWK-REAR-PERFORMANCE-STREET-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|HAWK Rear Performance Street Brake Pads 2006-2014|,|HB523R-539|,|116.61|,|104.45|,||,||,||,||,||,||,|HAWK Rear Performance Street Brake Pads 2006-2014
“THE MASTER OF FASTER” The racers never ending goal for greatness, the art of perfection is now complemented by the latest in technology. Racing technology continues to find its way to the street, and at Hawk Performance we have found a way to make you get closer to that goal!
This was the motivation behind the development of the new Hawk High Performance Street/Race compound. We built for you to go racing on it. Dive into the next tight corner, brake later and edge past your competition, but don't put it on a trailer after you lapped the field, take your helmet off and drive to you celebratory dinner. The new Street/Race compound from Hawk Performance truly gives you that ability.
|,|||-||HDMSUWOBR1|,|DDMWORKS|,|HDM Supercharger Wonder Bracket 1990-2005|,|DDM-05-026|,|39.99|,|29.99|,||,||,|0.000 |,||,||,||,|HDM Supercharger Wonder Bracket (1990-2005)
A quick and easy way to fix your jackson racing supercharger. One of the common problems with the jackson racing superchargers for the miata is that the bypass actuator arm on the supercharger wears out, causing you to loose power and performance from your supercharger. This simple bolt on bracket re-enforces the original actuator arm to help prevent this from happening. If your actuator arm has already worn through this simple piece installs in minutes getting you back on the road quick!
|,|||-||PARTS---PERFORMANCE-HEADERS---EXHAUST|,||,|HEADERS & EXHAUST|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-HEADERS---EXHAUST-1990-1997|,|PARTS---PERFORMANCE-HEADERS---EXHAUST|,|HEADERS AND EXHAUST (1990-1997)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-HEADERS---EXHAUST-1999-2005|,|PARTS---PERFORMANCE-HEADERS---EXHAUST|,|HEADERS AND EXHAUST (1999-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-HEADERS---EXHAUST-2006-2009|,|PARTS---PERFORMANCE-HEADERS---EXHAUST|,|HEADERS AND EXHAUST (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||HEELGUARDPERIMETER|,||,|Heel Guard Perimeter |,|heelguardperimeter|,|79.99|,|68.99|,||,||,|0.000 |,||,||,||,|Heel Guard Perimeter
• Holes provide pocket to pocket “lock" your heel in place (when not heel/toe shifting).
• Protects floor mats from damage and wear.
• Replaces floor mats during racing events (Saves 2 to 3 lbs. and protects carpet from wear)
• Covers up damaged area on worn floor mats.
|,|||-||HEPABLI|,|OWNERS-SHOWCASE|,|Henry Page
Georgia, Lilburn|,|newitem152760161|,||,||,||,||,||,||,||,||,|Henry Page of Georgia has bought all of the products listed to the right, and more. His modifications include interior, exterior, exhaust, and handling and suspension. You can say, that he is a very satisfied customer!
|,|||-||HIDRSUFORMOM|,|BLACKFRIDAYSALE|,|Hitch Drawbar - Suitable for most Miata / MX-5 trailer towing applications - Sale! |,|HDG-Drawbar|,|42.99|,|35.00|,||,||,|0.000 |,||,||,||,|Hitch Drawbar - Suitable for most Miata / MX-5 trailer towing applications
For all hitches w/ 1-1/4" Receiver
3-1/8" rise X 11-1/4" length
Black powdercoat
Ddoes not include hitch ball or pin
|,|||-||HOWTOBUHIMAM|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|How to Build a High-Performance Mazda Miata MX-5 |,|909-415|,|54.99|,|39.95|,||,||,|0.000 |,||,||,||,|How to Build a High-Performance Mazda Miata MX-5
Author Keith Tanner is well-known in the Miata performance
world as an expert, mechanic and racer. In this guide Keith guides you through the most cost-effective performance-improving products and modifications available for the Miata.
Whether you’ve considered simple bolt-on projects such as cold air intake or exhaust systems, or are interested in a substantial power upgrade like a supercharger or engine swap, Keith answers all your questions with practical, easy-to-understand information that will prevent you from making a costly mistake. Other common modifications discussed include wheels and tires, brakes, suspension and safety equipment.
Softbound, 8 ½” x 11”, 192 pages, full color.
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, and 2010
|,|||-||61-3193|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|HPS Silicone Radiator Coolant Hose Kit for NC 2006-2015|,|61-3193|,|319.99|,|258.99|,||,||,||,||,||,||,|HPS Silicone Radiator Coolant Hose Kit for NC 2006-2015
DESCRIPTION
HPS high temperature 3-ply reinforced silicone radiator hose kit. 9 piece set replaces all radiator hoses with high-heat resistance material which meets or exceeds OE specifications.
Fits 2006-2015 MX5 NC
No Hassle Performance Upgrade
- Ideal replacement or upgrade for OEM or aftermarket parts.
- The premium grade high-heat resistance 3-ply reinforced silicone hoses are made with correct bends and curves to ensure a perfect fitment.
- Includes 100% stainless steel non-perforated embossed hose clamps for easy installation, which do not cut through the silicone hoses.
- Prevent and fix the coolant leaking and engine over heating problem caused by cracked, damaged or collapsed OEM radiator hoses.
- Race proven design with long lasting quality and engineered for extremely high temperature service and prolonged exposure to under-hood and coolant heat.
- Maximum temperature rating: 350F.
|,|"Select Color" "Select Here" "Black" "Blue" "Red"|-||-|||-||910-410|,|20MAMISUANDS5|,|Hyper-Flex System Master Bushing Set by Energy Suspension 2006-2015|,|910-410|,|395.05|,|348.02|,||,||,||,||,||,||,|Hyper-Flex System Master Bushing Set by Energy Suspension 2006-2015
OEM rubber bushings break down with age, which makes your suspension feel sloppy. Switching to polyurethane bushings will not only get rid of that sloppiness but offer a more precision and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane will not only make your Miata handle better but you will never have to replace these bushings again as Energy Suspension's Hyper-Flex polyurethane will not break down like rubber bushings. Energy Suspension's Hyper-Flex polyurethane formulation is unique and so highly advanced that it has been awarded nine U.S Patents. Comes with installation instructions.
|,|||-||IL-ALUMINUM-COOLANT-OVERFLOW-TANK-NA|,|ENPE19|,|IL Motorsports Mazda Miata Aluminum Coolant Overflow Tank 1990-1997|,|909-546|,|298.00|,|274.98|,||,||,|0.000 |,||,||,||,|Miata Aluminum Coolant Overflow Tank w/Cap by IL Motorsport 1990-1997
Add a performance look under the hood of your Miata with this highly polished aluminum coolant overflow tank from IL Motorsport. Features an exterior clear level indicator so you can easily check your coolant level, and ventilation provided by a polished aluminum breather tube on the outside of the tank. Installs in the OEM factory location.
Made in Germany
|,|||-||IL-MOTORSPORT-ALUMINUM-PEDAL-NB|,|NBINVIALL|,|IL Motorsports Mazda Miata Aluminum Pedal Set 1990-2017+|,|ILM-NB0-0145|,|108.00|,|89.02|,||,||,|0.000 |,||,||,||,|IL Motorsports Mazda Miata Aluminum Pedal Set 1990-2017+
We have designed the ultimate race and street Pedal Set, tested on racetracks and streets.
"The Anti-Slip-Top of our Pedals give you a strong and perfect hold with any shoe, even if its wet and slippery."
We didn't make the pedals larger. The nice brushed silver finished pedals have the same perfect size like the existing pedals.
Most or even all of the aftermarket pedals are over sized and absolutely unusable for street and racing. So we decided to design a set that comes "complete with all needed mounting materials", and has still the same size like OEM.
No drilling needed to install them safely. We designed for the brake and clutch pedal a slip rubber that just has to be slipped over the OEM pedals it's that easy!
The gas pedal is installed with two screws in the existing holes. The foot rest cover is just screwed on the existing rubber of the OEM foot rest. The finish is completed with the nice I.L.Motorsport Logo on the Gas pedal and on the foot rest cover.
This Set comes complete with all needed parts for a less than 20 minutes installation.
|,|"Select Year" "Select Here" "1990-1997 (909-330)" "1999-2005 (909-331)" "2006-2015 (909-332) add(+$5)" "2016+ (909-333) add(+$35)"|-||-|||-||IL-PEDAL-NC|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|IL Motorsports Mazda Miata Aluminum Pedal Set 1990-2024|,|ILM-NC0-0145|,|104.05|,|89.90|,||,||,|0.000 |,||,||,||,|IL Motorsports Mazda Miata Aluminum Pedal Set 1990-2024
We have designed the ultimate race and street Pedal Set, tested on racetracks and streets.
"The Anti-Slip-Top of our Pedals give you a strong and perfect hold with any shoe, even if its wet and slippery."
We didn't make the pedals larger. The nice brushed silver finished pedals have the same perfect size like the existing pedals. Most or even all of the aftermarket pedals are over sized and absolutely unusable for street and racing. So we decided to design a set that comes "complete with all needed mounting materials", and has still the same size like OEM.
No drilling needed to install them safely. We designed for the brake and clutch pedal a slip rubber that just has to be slipped over the OEM pedals it's that easy! The gas pedal is installed with two screws in the existing holes. The foot rest cover is just screwed on the existing rubber of the OEM foot rest. The finish is completed with the nice I.L.Motorsport Logo on the Gas pedal and on the foot rest cover.
This Set comes complete with all needed parts for a less than 20 minutes installation.
|,|"Select Year" "Select Here" "1990-1997" "1999-2005" "2006-2015 add(+$10)" "2016-2024 add(+$40)"|-||-|||-||IL-FRONT-STRUT-BAR-NA-NB|,|19MAMISUANDS|,|IL Motorsports Mazda Miata Front Strut Tower Bar 1990-2005|,|ILM-907-345|,|250.00|,|179.00|,||,||,|0.000 |,||,||,||,|IL Motorsports Mazda Miata Front Strut Tower Bar 1990-2005
Polished strut brace aluminium for a better handling in corners, less side slope and better road holding.
A really nice feature this bar has is the integrated main brake cylinder movement reducer!
"Advantages are a more sensitive brake pedal and better brake feeling."
Please Notice:
-This bar is not compatible with the 4 liter window cleaner reservoir.
-The Reducer only fits on models where clearance between the firewall and the brake master cylinder is 210-230mm (approx. 8.267 to 9.055"inches please check pictures)
|,|||-||IL-MOTORSPORT-INTAKE-NB|,|19MAMIENPEVI|,|IL Motorsports Mazda Miata High Flow Intake 1999-2005|,|ILM-B0-5090|,|550.00|,|492.02|,||,||,|0.000 |,||,||,||,|IL Motorsports Mazda Miata High Flow Intake 1999-2005
IL brings us another performance piece that is well-engineered specifically to give your Miata more power. The scoop brings cool air in from in front of the radiator, then charges through the enclosed box, increasing the speed of the air. The kit then has a super-smooth silicone hose for the passage from the MAF into the engine. Colder air is denser and keeping the passages smooth means more power! The kit is designed to use a stock-size square filter, so you can install the K&N or JR reusable filter you already have.
*Note this kit when installed removes the hood prop, please check out our hood strut kits as a replacement.
|,|"Dropping fee" "add(+$35)"|-||-|||-||IL-MOTORSPORT-REPLACEMENT-TRAY-NA|,|NADASHBOARD|,|IL Motorsports Mazda Miata Replacement Tray 1990-1997|,|905-270|,|56.00|,|48.98|,||,||,|0.000 |,||,||,||,|IL Motorsports Mazda Miata Replacement Tray 1990-1997
Center Console Ashtray replacement. Designed to be a direct replacement for the original ashtray, this tray is ideal for giving you extra room for all your bits and bobs. The front part has been shaped to accept a mobile phone or Ipod. Comes complete with velcro strip attached for a secure fit. As always there is of course NO iPhone or iPad included.
|,|||-||ACCESSORIES-INTERIOR-ACCESSORIES|,||,|INTERIOR ACCESSORIES|,||,||,||,||,||,||,||,||,||,||,|||-||INAC1|,||,|Interior Accessories|,|newitem142549835|,||,||,||,||,||,||,||,||,|GoMiata is always first off the block with the latest products for your Miata!
|,|||-||ACCESSORIES-INTERIOR-ACCESSORIES-1999-2005|,|ACCESSORIES-INTERIOR-ACCESSORIES|,|INTERIOR ACCESSORIES (1999-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||ACCESSORIES-INTERIOR-ACCESSORIES-2006-2009|,|ACCESSORIES-INTERIOR-ACCESSORIES|,|INTERIOR ACCESSORIES (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||ISSHKNCOLECH|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|ISOTTA Shift Knob Cover Lever - Chrome Aluminum|,|ISOTTA-499L|,|26.25|,|22.31|,||,||,|0.000 |,||,||,||,|ISOTTA Shift Knob Cover Lever - Chrome Aluminum - Part # 499 L
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This shift knob cover lever also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Fits ISOTTA MANGUSTA, ERG, DROP, GARA, VIPER, and PUMA Shift Knobs.
• 52 mm (2.05 inches) tall.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter. Contact us to verify fit.
Quantity 1 Shifter Knob Cover Lever
Color - Finish Chrome Aluminum
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||JACKSONRACING|,|SHOP-BY-TOP-MIATA-BRANDS|,|Jackson Racing|,||,||,||,||,||,||,||,||,||,||,|||-||JARAMIPEAIRI|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Jackson Racing Miata Performance Air Intake 1990-1993|,|901-985|,|469.99|,|419.98|,||,||,|0.000 |,||,||,||,|Jackson Racing Miata Performance Air Intake 1990-1993
The Jackson Racing Cold Air Intake allows your car to breath clean, cool air for maximum horsepower, up to 14HP in most cases. If you are old enough to remember the old muscle cars with Cowl-Air Induction and Ram-Air Induction, you know that cold air does help performance. Instead of adding one of those unsightly hoods that you can barely see over, the JR Cold Air Intake system tucks neatly under the hood. A strategically placed scoop brings cold air into the throttle body with increased velocity. The combination of cool air and pressurized air (at speed) will increase your horsepower.
Each system includes a high-quality foam air filter for increased airflow and filtration. To make the most of this system make sure you add the Jackson Racing Header, High Flow Catalyst and High Flow Exhaust system!
**Jackson Racing Intake is 50 State Smog Legal
CARB Approved!**
Click Here for 1990-93 1.6L Install Instructions
|,|||-||JABEOBRI|,|OWNERS-SHOWCASE|,|Javier Berrocal Obando
Costa Rica|,|newitem109911878|,||,||,||,||,||,||,||,||,|This is my perfect tropical paradaise car. Nothing to envy anyone, just pure fun and always enjoying the weather down here. So far it’s only got the MonsterFlow Intake with Cool Box, Fidanza Flywheel, Magnecor Plug Wires, custom made exhaust, brand new Robbins top (thank God I was sick of having duct tape on my roof!!).
Javier Berrocal Obando,
Costa Rica
|,|||-||JOCRMA|,|OWNERS-SHOWCASE|,|John Crowley
Frankln, MA|,|newitem|,||,||,||,||,||,||,||,||,|2002 Titanium Miata with supercharger , PWR FM radiator, fast flow cat, and duals all sound great, but what gets the stares and positive comments is the Racing Beat Streamline Rear Deck Cover purchased from Go Miata. It gives the car a European look. Also, the beautiful grill is the GoMiata Diamond Grill.
Add to these items Racing Beat Style Bar and a few other aftermarket changes, and people are not sure what kind of car it they are looking at---some have to be convinced it is indeed a Miata.
Thanks to great aftermarket dealers like Go Miata for excellent products and attention to detail.
This Miata has won a 1st, 2nd and 3rd place trophies in the last five auto shows.
John Crowley
Frankln, MA
|,|||-||KN|,|SHOP-BY-TOP-MIATA-BRANDS|,|K&N|,||,||,||,||,||,||,||,||,||,||,|||-||57-0047|,|NEW|,|K&N 57I Series PERFORMANCE AIR INTAKE SYSTEM 1990-1997|,|57-0047|,|379.00|,|248.02|,||,||,||,||,||,||,|K&N 57I Series PERFORMANCE AIR INTAKE SYSTEM 1990-1997
K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provides even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Series Intakes are not legal for use in California and other US States adopting California emission standards.
Replacement Filter RC-5131
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 1
Clamp Material Steel
Clamp Style Regular
Couplers Included None
Type Gen I
Product Style 57i Series International Kits
Air Filter Height 5.5 in (140 mm)
Intake Pipe Color / Finish Black
Intake Pipe Material Flex Hose
Street Legal In All US States No
TUV Approved (Europe) No
Weight 2.4 lb (1.1 kg)
Air Filter Large End Diameter 5.031 in (128 mm)
Product Box Height 9 in (229 mm)
Product Box Length 9 in (229 mm)
Product Box Width 9 in (229 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Warranty 1,000,000 Miles/10 Year
|,|"Select Year" "Select Here" "1990-1993" "1994-1997 add(+$26)"|-||-|||-||KNMIPEININKI|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|K&N Miata Performance Induction International Kit 1.8L and 2.0L 2005-2009 |,|KN-57-0656|,|292.25|,|248.99|,||,||,|0.000 |,||,||,||,|Designed for European Miatas. Fits the 2005-2009 1.8L and 2.0L Miata L4 F/I.
K&N 57i Series Induction Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life.
International Kits:
K&N’s 57i-Series intake systems are not designed on vehicles available in North America. These kits are designed in K&N’s international offices in the U.K. and the Netherlands on vehicles available in Europe. Vehicles sold in Europe do not have to meet U.S. Federal EPA emissions standards, and may be built/equipped differently than vehicles available for purchase in the U.S. For this reason, K&N cannot guarantee a 57i intake will fit a vehicle sold in the U.S. This does not mean that the kit will not work on your vehicle, it simply means the kit has not been tested for your vehicle.
Product Specifications
* Product Style: 57i Series International Kits
* Type: Gen I
* CARB Exempt: No
* Weight: 2.8 lb (1.3 kg)
* Product Box Length: 9 in (229 mm)
* Product Box Width: 9 in (229 mm)
* Product Box Height: 9 in (229 mm)
|,|||-||KNMIPEINKIT|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|K&N Miata Performance Induction International Kit 1990-1994|,|KN-57-0047|,|359.00|,|248.02|,||,||,|0.000 |,||,||,||,|For European Miatas. Fits the 1990-1994 1.6 Miata, L4 F/I - 16v, Sq. entry to AFM.
K&N 57i Series Induction Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life.
International Kits:
K&N’s 57i-Series intake systems are not designed on vehicles available in North America. These kits are designed in K&N’s international offices in the U.K. and the Netherlands on vehicles available in Europe. Vehicles sold in Europe do not have to meet U.S. Federal EPA emissions standards, and may be built/equipped differently than vehicles available for purchase in the U.S. For this reason, K&N cannot guarantee a 57i intake will fit a vehicle sold in the U.S. This does not mean that the kit will not work on your vehicle, it simply means the kit has not been tested for your vehicle.
Product Specifications
* Product Style: 57i Series International Kits
* Type: Gen I
* CARB Exempt: No
* Weight: 2.4 lb (1.1 kg)
* Product Box Length: 9 in (229 mm)
* Product Box Width: 9 in (229 mm)
* Product Box Height: 9 in (229 mm)
|,|||-||KNMIPEINKIT2|,|19MAMIDRVIAL|,|K&N Miata Performance Induction International Kit 1994-1998|,|KN-57-0348|,|291.46|,|248.02|,||,||,|0.000 |,||,||,||,|For European Miatas. Fits the 1994-1998 1.6L and 1.8L Miatas L4 F/I.
K&N 57i Series Induction Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life.
International Kits:
K&N’s 57i-Series intake systems are not designed on vehicles available in North America. These kits are designed in K&N’s international offices in the U.K. and the Netherlands on vehicles available in Europe. Vehicles sold in Europe do not have to meet U.S. Federal EPA emissions standards, and may be built/equipped differently than vehicles available for purchase in the U.S. For this reason, K&N cannot guarantee a 57i intake will fit a vehicle sold in the U.S. This does not mean that the kit will not work on your vehicle, it simply means the kit has not been tested for your vehicle.
Product Specifications
* Product Style: 57i Series International Kits
* Type: Gen I
* Replacement Filter: RC-4580
* CARB Exempt: No
* Weight: 4.4 lb (2 kg)
* Product Box Length: 9 in (229 mm)
* Product Box Width: 9 in (229 mm)
* Product Box Height: 9 in (229 mm)
|,|||-||KNMIPEININKI1|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|K&N Miata Performance Induction International Kit 2.0L 2006-2008|,|KN-57A-6023|,|494.83|,|428.02|,||,||,|0.000 |,||,||,||,|Fits the European Miatas, 2006-2008 2.0L.
&N Apollo Cold Air Induction Systems incorporate a washable/reusable K&N High-Flow Air Filter within a protective shell. They come with custom mounting hardware to fit specific vehicle applications. The Apollo's shell reduces heat build-up and feeds cool air into your engine, resulting in improved volumetric efficiency and increased power gains. Apollo Cold Air Induction Systems allow for updating your vehicle's intake system while retaining a closed environment.
International Kits:
K&N’s 57i-Series intake systems are not designed on vehicles available in North America. These kits are designed in K&N’s international offices in the U.K. and the Netherlands on vehicles available in Europe. Vehicles sold in Europe do not have to meet U.S. Federal EPA emissions standards, and may be built/equipped differently than vehicles available for purchase in the U.S. For this reason, K&N cannot guarantee a 57i intake will fit a vehicle sold in the U.S. This does not mean that the kit will not work on your vehicle, it simply means the kit has not been tested for your vehicle.
Product Specifications
* Product Style: 57i Series International Kits
* Replacement Filter: RC-5052
* CARB Exempt: No
* Weight: 6 lb (2.7 kg)
* Product Box Length: 10 in (254 mm)
* Product Box Width: 10 in (254 mm)
* Product Box Height: 10 in (254 mm)
|,|"Drop-Shipping fee" "add(+$15)"|-||-|||-||KNMIPEINKIT12|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|K&N Miata Performance Intake International Kit 1999-2000 |,|KN-57-0434|,|201.12|,|153.95|,||,||,|0.000 |,||,||,||,|Designed for European Miatas. Fits the 1999-2000 1.8L Miata L4 F/I.
K&N 57i Series Induction Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adaptors are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life.
International Kits:
K&N’s 57i-Series intake systems are not designed on vehicles available in North America. These kits are designed in K&N’s international offices in the U.K. and the Netherlands on vehicles available in Europe. Vehicles sold in Europe do not have to meet U.S. Federal EPA emissions standards, and may be built/equipped differently than vehicles available for purchase in the U.S. For this reason, K&N cannot guarantee a 57i intake will fit a vehicle sold in the U.S. This does not mean that the kit will not work on your vehicle, it simply means the kit has not been tested for your vehicle.
Product Specifications
* Product Style: 57i Series International Kits
* Type: Gen I
* CARB Exempt: No
* Weight: 4.6 lb (2.1 kg)
* Product Box Length: 15.13 in (384 mm)
* Product Box Width: 9.13 in (232 mm)
* Product Box Height: 9.25 in (235 mm)
|,|||-||KNMIPEOILFI1|,|19MAMIENPEAI|,|K&N Miata Performance Oil Filter 1990-2019|,|KN-HP-1008|,|19.05|,|17.49|,||,||,|0.000 |,||,||,||,| Fits the 1990-2019 Miata 1.6L and 1.8L L4 F/I, and the 2004-2005 1.8L Mazdaspeed Miata.
Originally developed for demanding race applications, our premium Performance Gold® Oil Filter is rapidly becoming a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1” nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration.
Product Specifications
*Product Style: Oil Filters
*Height: 2.86 in (73 mm)
*Outside Diameter: 2.69 in (68 mm)
*Thread Inside Diameter: M20 x 1.5
*PSI Relief Valve: 11-17
*Anti Drain Back Valve: Yes
*Style: Canister
*Weight: 0.5 lb (0.2 kg)
*Product Box Length: 3.15 in (80 mm)
*Product Box Width: 3.15 in (80 mm)
*Product Box Height: 2.91 in (74 mm)
|,|||-||KNMIPEOILFI2|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|K&N Miata Performance Oil Filter 2006-2009|,|KN-HP-1002|,|19.05|,|17.49|,||,||,|0.000 |,||,||,||,| Fits the 2006-2009 Miata 2.0L L4 F/I.
Originally developed for demanding race applications, our premium Performance Gold® Oil Filter is rapidly becoming a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1” nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration.
Product Specifications
* Product Style: Oil Filters
* Height: 3.74 in (95 mm)
* Outside Diameter: 3 in (76 mm)
* Thread Inside Diameter: 0.75
* Thread Number: 16
* PSI Relief Valve: 11-14
* Anti Drain Back Valve: Yes
* Style: Canister
* Weight: 0.7 lb (0.3 kg)
* Product Box Length: 3.12 in (79 mm)
* Product Box Width: 3.12 in (79 mm)
* Product Box Height: 3.8 in (97 mm)
|,|||-||KNMIPEREAIRF|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|K&N Miata Performance Replacement Air Filter 1990-1997|,|KN-33-2034|,|69.99|,|54.98|,||,||,|0.000 |,||,||,||,|Fits the 1990-1997 Miata 1.6L and 1.8L L4 F/I.
K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details.
Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.
Product Specifications
* Product Style: Panel Air Filter
* Height: 1 in (25 mm)
* Outside Length: 9.75 in (248 mm)
* Outside Width: 5.938 in (151 mm)
* Filter Re-Oiling Amount: 0.86 oz (25 ml)
* Inner Wire: No
* Top Style: Open
* Weight: 0.9 lb (0.4 kg)
* Product Box Length: 7.72 in (196 mm)
* Product Box Width: 1.75 in (44 mm)
* Product Box Height: 13.56 in (345 mm)
|,|||-||KNMIPEREAIRF1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|K&N Miata Performance Replacement Air Filter 1998-2005|,|KN-33-2676|,|79.59|,|64.02|,||,||,|0.000 |,||,||,||,|Fits the 1998-2005 Miata 1.8L L4 F/I, and the 2004-2005 Mazdaspeed Miata 1.8L.
K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details.
Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.
Product Specifications
* Product Style: Panel Air Filter
* Height: 0.938 in (24 mm)
* Outside Length: 10.063 in (256 mm)
* Outside Width: 6.375 in (162 mm)
* Filter Re-Oiling Amount: 0.83 oz (25 ml)
* Inner Wire: No
* Top Style: Open
* Weight: 0.9 lb (0.4 kg)
* Product Box Length: 7.72 in (196 mm)
* Product Box Width: 1.75 in (44 mm)
* Product Box Height: 13.56 in (345 mm)
|,|||-||KNMIPEREAIRF2|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|K&N Miata Performance Replacement Air Filter 2005-2019|,|KN-33-2335|,|69.29|,|64.02|,||,||,|0.000 |,||,||,||,|Fits the 2005-2019 Miata 2.0L and 1.8L(International) L4 F/I.
K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty™ and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED.
Product Specifications
* Product Style: Panel Air Filter
* Height: 1.063 in (27 mm)
* Outside Length: 11.938 in (303 mm)
* Outside Width: 6.313 in (160 mm)
* Filter Re-Oiling Amount: 0.91 oz (27 ml)
* Weight: 1 lb (0.5 kg)
* Product Box Length: 7.72 in (196 mm)
* Product Box Width: 1.75 in (44 mm)
* Product Box Height: 13.56 in (345 mm)
|,|"Select Year" "Select Here" "2005-2015 (33-2335)" "2016-2019+(33-5040)"|-||-|||-||33-5040|,|19MAMIENPEAI|,|K&N Miata Performance Replacement Air Filter 2015-2019|,|33-5040|,|75.99|,|64.02|,||,||,||,||,||,||,|K&N Miata Performance Replacement Air Filter 2015-2019
The K&N 33-5040 Air Filter fits some Abarth 124 Spider, Fiat 124 Spider, Mazda MX-5, Mazda MX-5 IV, Mazda MX-5 Miata, and Mazda Roadster models. See vehicle applications link for details.
K&N's replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for the majority of vehicles on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be the last air filter your vehicle will ever need.
Product Specifications
Air Filter Shape Panel
Filter Material Cotton Gauze
Height 1.125 in (29 mm)
Outside Length 13.563 in (344 mm)
Outside Width 5.625 in (143 mm)
Package Contents 1 Air Filter
Product Style Panel Air Filter
Weight 1.1 lb (0.5 kg)
Filter Re-Oiling Amount 1.05 oz (31 ml)
|,|||-||KNMIPOPEINKI|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|K&N Miata Polished Performance Intake Kit 1999-2005|,|KN-69-6000TP|,|591.09|,|428.02|,||,||,|0.000 |,||,||,||,|Fits the 1998-2005 1.8L Miata L4 F/I, carb exempt for all years except 2005.
Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Typhoon intakes come in one of three designs; cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. Some Typhoon's have high quality finish options including polished aluminum (part ends with TP), powder coated blue (part ends in TB), powder coated red (part ends in TR), and powder coated silver (ends in TS) among others. K&N intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction allowing more air flow to your engine. More air means more usable power and acceleration throughout the engine's RPM range.
Product Specifications
* Product Style: 69 Series Typhoon Kits
* Estimated Horsepower Gain: 3.5 HP @ 6499 RPM
* Color: Polished
* Replacement Filter: RU-4870
* CARB Exempt: See Application Link Below
* System Type: Short-ram intake system
* Base Outside Diameter: 6 in (152 mm)
* CARB EO Number: D-269-30
* Flange Inside Diameter: 2.75 in (70 mm)
* Flange Length: 2 in (51 mm)
* Flange Type: Centered
* Height: 6.5 in (165 mm)
* Top Material/Finish: None
* Top Outside Diameter: 5 in (127 mm)
* Top Style: X-Stream
* Weight: 6.9 lb (3.1 kg)
* Product Box Length: 18.25 in (464 mm)
* Product Box Width: 14.5 in (368 mm)
* Product Box Height: 8.5 in (216 mm)
|,|||-||KNMIPEINKIT11|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|K&N Miata Red Performance Intake Kit 1999-2005|,|KN-69-6000TR|,|490.09|,|428.02|,||,||,|0.000 |,||,||,||,|Fits the 1998-2005 1.8L Miata L4 F/I, carb exempt for all years except 2005.
Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Typhoon intakes come in one of three designs; cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. Some Typhoon's have high quality finish options including polished aluminum (part ends with TP), powder coated blue (part ends in TB), powder coated red (part ends in TR), and powder coated silver (ends in TS) among others. K&N intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction allowing more air flow to your engine. More air means more usable power and acceleration throughout the engine's RPM range.
Product Specifications
* Product Style: 69 Series Typhoon Kits
* Estimated Horsepower Gain: 3.5 HP @ 6499 RPM
* Color: Red
* Replacement Filter: RU-4870
* CARB Exempt: See Application Link Below
* System Type: Short-ram intake system
* Base Outside Diameter: 6 in (152 mm)
* CARB EO Number: D-269-30
* Flange Inside Diameter: 2.75 in (70 mm)
* Flange Length: 2 in (51 mm)
* Flange Type: Centered
* Height: 6.5 in (165 mm)
* Top Material/Finish: None
* Top Outside Diameter: 5 in (127 mm)
* Top Style: X-Stream
* Weight: 6.9 lb (3.1 kg)
* Product Box Length: 18.25 in (464 mm)
* Product Box Width: 14.5 in (368 mm)
* Product Box Height: 8.5 in (216 mm)
|,|||-||AEMCLKITFORD|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|K&N Synthetic Air Filter Cleaner Spray |,|KN-99-0624|,|29.00|,|19.95|,||,||,|0.000 |,||,||,||,|K&N Synthetic Air Filter Cleaner Spray - 32 oz.
Features & Benefits:
K&N 99-0624 is a 32 ounce spray bottle of K&N Synthetic Air Filter Cleaner. The 99-0624 air filter cleaner will bring your K&N synthetic air filter to like new condition. It works to dissolve grime and dirt build up, then it can be washed away with water. It is a great cleaner for K&N Hybrid air filters, K&N Blackhawk air filters, Dryflow air filters and other synthetic air filters.
Pump spray bottle
Specially formulated for synthetic filters
Disolves dirt and grime
High performance cleaner
|,|||-||KWOSTFULID191|,|NAEXFULI|,|K.G. Works Stainless Fuel Lid 1990-1997|,|808-017|,|149.99|,|129.95|,||,||,|0.000 |,||,||,||,|K.G. Works Stainless Fuel Lid 1990-1997
This stainless steel fuel lid will give your Mazda Miata that vintage race car style look for a great price. Manufactured just like the OEM lid with similar parts, this is a easy and direct replacement for that normal factory offering. Center of cap is matte black. Create some attention at the pumps next time you fill up. It happens to us all the time.
|,|||-||55024|,|20MAMIENPEAI1|,|K/N Filter Replacement Filter Cold Force Intake Kit 2006-2019|,|55024|,|65.00|,|52.00|,||,||,||,||,||,||,|K/N Filter Replacement Filter Cold Force Intake Kit 2006-2019
This replacement filter is intended for use on the Racing Beat MX-5 Cold Force Air Intake Kit. Designed specifically by K&N for use with the Racing Beat intake kit this filter can be cleaned and re-used as required.
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-KATZKIN|,|SHOP-BY-TOP-MIATA-BRANDS|,|KATZKIN|,||,||,||,|KATZKIN MIATA SEAT UPHOLSTERY|,||,||,||,||,||,||,|||-||KAINKIT|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Katzkin Installation Tool Kit|,|KAT-ITK1902|,|169.99|,|139.95|,||,||,|0.000 |,||,||,||,|Katzkin Installation Tool Kit includes:
* Upholstery Spray
* Tuck Tool
* Hog Rings
* Hog Ring Pliers
* Torque sockets
|,|||-||LESWRI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Katzkin Leather Swatch Deck |,|KTZ-RING|,|15.99|,|14.02|,||,||,|0.000 |,||,||,||,|Interested in a set of Katzkin seats, but want to make sure you get the right color combinations? Why not order a sample of Real Leather Swatch Deck or Ebook swatch.
The Katzkin Leather Swatch comes in an EBook
Click picture to see Katzkin Swatch
|,|||-||KADOPAON|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Katzkin Miata Leather Upholstery Door Panels Only - 1990 - 1997|,|405-201|,|189.99|,|169.00|,||,||,|0.000 |,||,||,||,|Katzkin Miata Leather Upholstery Door Panels Only - 1990 - 1997
Whether you've already purchased our Katzkin seats or are planning on doing so, our new Katzkin door panels provide a beautiful finishing touch!
Available in all colors for the 1990-1997 ONLY, They are solid without any cut outs, so you simply do the cutting for your speakers and door handles yourself, or simply have an auto upholstery shop install them.
They are the upholstery only, not the fiberboard portion. These cover BELOW the black top portion of the door.
These are a custom order.
Katzkin Swatch Below
|,|"Door Panels Materials (1990-1997 ONLY)" "Select Here" "Premium Italian Leather" "Tuscany, add(+$159)"|-||-|"Select Color" "Select Here" "Black" "Camel" "Other-Please specify in Comments section"|-||-|||-||KAPRITLEHAHI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Katzkin Premium Italian Leather Hide|,|KTZ-HIDETC|,|399.99|,|259.95|,||,||,|0.000 |,||,||,||,|If you are looking to customize your Interior of your Miata with Premium Leather. Katzkin Premium Italian Leather is the Best Leather out on there.
|,|"Select Order" "Half Hide" "Full Hide add(+$245.00)" "Half Hide Perforated add(+$60)" "Full Hide Perforated (+$115.00)"|-||-|"Select Color" "Black" "Forest Green" "Pacific Blue" "Pearl (White)" "Red" "Sunrise (Yellow)" "Tan (Bisque for 1999+)" "Tan (Camel for 1990-1997)" "Other (please indicate in Comments section)"|-||-|||-||KATPREMITLEA|,|CLEARANCE|,|Katzkin Premium Italian Leather Miata Seat Upholstery 1990-2023 - SALE |,|KTZ-MIATA|,|1,299.99|,|794.02|,||,|img src="https://sep.turbifycdn.com/ty/cdn/gomiata/katzkin.gif?t=1712417673&"|,|5.000 |,||,||,||,|Katzkin Premium Italian Leather Miata Seat Upholstery 1990-2023
There Katzkin Premium Italian Leather is nothing like the look and feel of leather for your Mazda Miata. These premium leather seat skins are made of the finest glove soft Italian leather. Make sure to scroll down to see more pictures of our customers' seats and the options available. Also available with SUEDEZKIN Synthetic Suede Inserts! Call for details.
You can now purchase heaters for your Katzkin or factory seats! For only $155 per seat or $295 for a pair, you can add intergrated electric seat heaters like those found on luxury cars. Comes with a fingertip control button with two levels of heat! 3 Year 36,000 mile warrarty, just like the seats. Order these with your seats by clicking below.
Seats are constructed with 100% leather seating surfaces and matching vinyl back and sides. All leather seats are available for additional cost. Door panels are available for 90-97 Miatas for only $169. Be sure to specify the year of your Miata on the order form for proper fitment.
NOTE: These are NOT seat covers, nor are they complete seats. They are custom perfect fit leather seat upholstery that is installed over your existing seat foam after your original upholstery is removed.
Insert and Body patterns are not available for 1999-2000 year model miatas.
If you are looking to customize your Interior of your Miata with Vinyl or Leather. Feel free to call our Customer Service Department.
Have more questions? Give us a call at 1-619-466-4282 to talk to CUSTOMER SERVICE representative.
Click picture to see Katzkin Swatch
Due to restrictions from Mazda, Miata embroidery is NOT available.
We recommend professional installation of these by an upholstery shop, however you can also do the installation yourself.
|,|"What Year is Your Miata" "Select Year" "1990-1992" "1993-1995" "1996-1998" "1999-2000" "2001-2005 add(+$55)" "2006-2007 add(+$85)" "2008 add(+$95)" "2009-2015 add(+$150)" "2016-2023 add(+$150)"|-||-|
"Select Style (see below)" "Insert" "Combo" "Body" "One Tone (Single Tone)"|-||-|"Select Outer Color" Black "Camel recommended for 1990-1997" "Bisque recommended for 1999-2005" Red Sunrise Pearl "Pacific Blue" "Other (please indicate in 'Comments' section)"|-||-|"Select Insert Color" Black "Camel recommended for 1990-1997" "Bisque recommended for 1999-2005" Red Sunrise Pearl "Pacific Blue" "Other (please indicate in 'Comments' section)"|-||-|"Insert Style" "Flat Leather (Available for all years)" "Gathered leather (1990-1997 Only)"|-||-|"Materials" "Premium Italian Leather" "Tuscany, add(+$219)" "Suedezkin, Exotics & Barracuda, add(+$219)"|-||-|"Perforated" "No" "Yes, add(+$95)"|-||-|"Would you like embroidery" No "Yes - Roadster, add(+$95)" "Yes - M Edition (OEM Style), add(+$105)"|-||-|"Embroidery Color" None Black Tan Red Yellow White "Forest Green" "Pacific" "Cobalt" "Imperial Blue Color - recommended matching OEM M-Edition color" " " "Other (please indicate in 'Comments' section)"|-||-|"Would you like contrasting stitching?" "No to both" "Yes, contrast stitching - indicate color in Comments section add(+$45)"|-||-|"Would you like piping?" "No to both" "Yes, piping - indicate color in Comments section add(+$129)"|-||-|"Do you have headrest speakers?" No Yes|-||-|"Do you have Side Airbags?" No Yes|-||-|"Katzkin Leather on Side and Back (100% Leather)" "No" "Yes, 100% Premium Italian Leather add(+$245)" "Yes, 100% Tuscany Leather add(+$360)"|-||-|"Pair of optional door panels (1990-1997 ONLY)" "No" "Yes, pair for"|-||-|"Door Panels Materials (1990-1997 ONLY)" "Select Here" "Premium Italian Leather" "Tuscany, add(+$169)"|-||-|"Door Panel Color" None "Black, add(+$169)" "Camel, add(+$169)" "Bisque, add(+$169)" "Sunrise, add(+$169)" "Pacific Blue, add(+$169)" "Other, add(+$169)(please indicate in 'Comments' section)"|-||-|"Seat Heaters" "No, I like freezing my bum off." "Yes! Just one please, add(+$159)" "Yes! A pair please, add(+$299)"|-||-|"Katzkin Installation Tool Kit" "No, I don't need help" "Yes, I want the install kit add(+$139)"|-||-|||-||KAPRITLEFUHI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Katzkin Premium Italian Vinyl|,|KTZ-VINYLTC|,|59.99|,|45.95|,||,||,|0.000 |,||,||,||,|If you are looking to customize your Interior of your Miata with Premium Vinyl. Katzkin Premium Italian Vinyl is the Best Vinyl out on there.
|,|"Select Yard" "One" "Two add(+$45)" "One Yard Perforated add(+$70)" "Two Yard Perforated add(+$130)"|-||-|"Select Color" "Black" "Forest Green" "Pacific Blue" "Pearl (White)" "Red" "Sunrise (Yellow)" "Tan (Bisque for 1999+)" "Tan (Camel for 1990-1997)" "Other (please indicate in Comments)"|-||-|||-||KATZKIN-SEAT-HEATER-KIT|,|NBINVIALL|,|Katzkin Seat Heater Kit|,|katzkin-seat-heater-kit|,|189.99|,|155.00|,||,||,||,||,||,||,|Katzkin Seat Heater Kit
This Katzkin Seat Heater kit makes those cold mornings much more bearable. This kit includes trimmable seat heater pads for the bottom and back of a seat, wiring and a switch.
Fits: All Mazda Miata's
Heating Element Pads are Trimmable to fit your seat perfectly!
Includes everything needed for installation
Heating pads for the bottom AND back of the seat!
Carbon fiber heating elements (45w Per Element)
One kit does one seat
|,|||-||KAYPARK123|,||,|KAY PARK
PRESIDENT & CEO Kay@GoMiata.com|,||,||,||,|Greeting from Kay Park|,||,||,||,||,||,||,|||-||KAYPARK|,||,|KAY PARK
PRESIDENT
Kay@GoMiata.com|,|newitem144971540|,||,||,|Kay Park|,||,||,||,||,||,|President: GoMiata
|,|||-||KEEAUTOPMXMI15|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata - Headliner Retro Fit 1990-1997|,|KEE-HL7444|,|714.00|,|547.02|,||,||,|0.000 |,||,||,||,|Kee Auto Top Mazda MX-5 Miata - Headliner Retro
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
Image does NOT represent this exact part
|,|"Select Color" "Black" "Grey" "Sandstone" "Maroon add(+$99)"|-||-|||-||KEEAUTOPMXMI21|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata - Headliner Retro Fit 1990-2005|,|KEE-HL7445|,|714.00|,|547.02|,||,||,|0.000 |,||,||,||,|Kee Auto Top Mazda MX-5 Miata - Headliner Retro
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
Image does NOT represent this exact part
|,|"Select Color" "Black" "Dark Grey" "Biscuit" "Twilight Blue add(+$99)" "Maroon add(+$99)"|-||-|||-||KEEAUTOPMXMI16|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata - Rain Rail 1990-2005|,|RR4214ECONOMY|,|159.00|,|119.02|,||,||,|0.000 |,||,||,||,|Kee Auto Top MX-5 Miata - Rain Rail 1990-2005
This is the plastic "rain gutter" type piece that every Miata already has. It is located behind the top (you can't see it until you remove the top) and funnels the water that runs down between the top and the body of the car to drainage holes. If this piece is cracked or brittle, serious water damage can occur in your Miata.
|,|||-||KEES-NC-TENSION-CAB|,|SOFTTOPNC|,|Kee Auto Top MX-5 Miata - Side Tension Cables 2006-2011|,|KEE-TDC4140-06-11|,|140.00|,|109.02|,||,||,|0.000 |,||,||,||,|Kee Auto Top MX-5 Miata - Side Tension Cables 2006-2011
Side Tension Cables - 29 3/4" Long
This is a pair of side tension cables that can be replaced when replacing your top.
|,|||-||KEEAUTOPMXMI17|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata - Tinted Glass Defroster Window|,|KEE-HG0412DF|,|450.00|,|279.95|,||,||,|0.000 |,||,||,||,|Kee Auto Top MX-5 Miata - Tinted Glass Defroster Window
Tinted glass DEFROSTER window. Use with 4214 or 4102 for no sewing. (Wiring may be necessary)
Image does NOT represent this exact part
|,|||-||KEEAUTOPMXMI18|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata - Tinted Glass Window|,|KEE-HG0412TN|,|430.00|,|269.95|,||,||,|0.000 |,||,||,||,|Kee Auto Top MX-5 Miata - Tinted Glass Window
Tinted glass window Use with 4214 & 4102 for no sewing. (Others may require sewing)
Image does NOT represent this exact part
|,|||-||KEEAUTOPMXMI5|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Cabrio Tinted Defroster Glass Window with Zipper 1990-2005 - Sale |,|KEE-CF4102DF|,|1,622.00|,|732.02|,||,||,|5.000 |,||,||,||,| Kee Auto Top MX-5 Miata Convertible - Cabrio with Tinted Defroster Glass Window with Zipper
This is the top-of-the-line non-original glass top for the 1990-2005 Miatas that is available in both Cabrio and StayFast. It has the rear tinted glass window with the zipper for ease of use along with the defroster! Don't mess with the rest, go with the best with this top.
Cabrio Top with tinted glass DEFROSTER window (zip down with single pull ring) and original style prepunched retainer pieces. (wiring may be necessary)
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan(Original Color 15CB)"|-||-|||-||KEEAUTOPMXMI22|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Cabrio Economy One Plastic Window 1990-2005 - Sale |,|KEE-CF4126WC|,|1,102.00|,|562.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - Cabrio Economy One Plastic Window
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the glass is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, a feature that some other manufacturers don't offer.
Kee Auto Cabrio Economy Top with 1 plastic window that has heat-sealed detail and original style prepunched retainer pieces.
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan(Original Color 15CB)"|-||-|||-||KEEAUTOPMXMI12|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Cabrio Economy Tinted Glass Window 1990-2005 - Sale |,|KEE-CF4099TN|,|1,204.00|,|599.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - Cabrio Economy Tinted Glass Window 1990-2005
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the glass is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, a feature that some other manufacturers don't offer.
Kee Auto Cabrio Economy Top with tinted glass window heatsealed into pocket for added strength, matching binding around rear window, no zipper, original style prepunched retainer pieces. (economy)
Fits earlier 1989-1998 models complete with necessary straps and instructions for conversion. (OE for 1999-2005 Only)
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan(Original Color 15CB)"|-||-|||-||KEEAUTOPMXMI11|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Cabrio Economy Tinted Glass Window with Defroster 1990-2005 - Sale |,|KEE-CF4099DF|,|1,304.00|,|642.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - Cabrio Economy Tinted Glass Window with Defroster 1990-2005
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the glass is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, a feature that some other manufacturers don't offer.
Kee Auto Cabrio Economy Top with tinted glass DEFROSTER window heatsealed into pocket for added strength, matching binding around rear window, no zipper, original style prepunched retainer pieces.(economy)
Fits earlier 1989-1998 models complete with necessary straps and instructions for conversion. (OE for 1999-2005 Only)
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan (Orignal Color 15CB)"|-||-|||-||KEEMXMICOAUT|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Cabrio One Plastic Window Original Style with Zipper 1990-2005 - Sale |,|KEE-CF4214WC|,|1,324.00|,|612.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - Cabrio One Plastic Window Original Style with Zipper 1990-2005
Kee Auto Cabrio Original Top with 1 plastic zip down window that has heat-sealed detail, single pull ring and original style prepunched retainer pieces.
The Original Style top is made in the style of the OEM convertible top. The Original Style top will install to your car in the same way the original top does and is the same quality and look as the OEM top too. This is one of the best Miata tops on the market today.
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan(Original Color 15CB)"|-||-|||-||KEEAUTOPMXMI9|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Cabrio Original Style Tinted Glass Window with Defroster 1990-2005 - Sale |,|KEE-CF4051DF|,|1,673.00|,|788.02|,||,||,|5.000 |,||,||,||,| Kee Auto Top MX-5 Miata Convertible - Cabrio with Tinted Defroster Glass Window 1990-2005
This is the top-of-the-line original glass top for the 1990-2005 Miatas that is available in both Cabrio and StayFast. It has the rear tinted glass window with the defroster! Don't mess with the rest, go with the best with this top.
Cabrio Top with tinted glass DEFROSTER window and original style prepunched retainer pieces. (wiring may be necessary)
For Mazda MX-5 Miata Years: 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan(Original Color 15CB)"|-||-|||-||KEES-NC-CABRIO-TOP|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Cabrio Tinted Glass Defrosted Window 2006-2015 - Sale |,|KEE-CF4140DF|,|1,786.00|,|822.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - Cabrio Tinted Glass Defrosted Window 2006-2015
Top w/tinted glass DEFROSTER window heat sealed into pocket for added strength, one piece top no deck seams & no zipper, prepunched retainer pieces, sewn in rain gutters as original
The Original Style top is made in the style of the OEM convertible top. The Original Style top will install to your car in the same way the original top does and is the same quality and look as the OEM top too. This is one of the best Miata tops on the market today.
|,|"Color" "Select Here" "Black (11CB)" "Light Tan(20CB)"|-||-|||-||KEEAUTOPMXMI7|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Cabrio Tinted Glass Window with Zipper 1990-2005 - Sale |,|KEE-CF4102TN|,|1,467.00|,|682.02|,||,||,|5.000 |,||,||,||,| Kee Auto Top MX-5 Miata Convertible - Cabrio Tinted Glass Window with Zipper 1990-2005
This is the top-of-the-line non-original glass top for the 1990-2005 Miatas that is available in both Cabrio and StayFast. It has the rear tinted glass window with the zipper for ease of use! Don't mess with the rest, go with the best with this top.
Top with tinted glass window (zip down with single pull ring) and original style prepunched retainer pieces.
|,|"Select Color" "Select Here" "Black (11CB)" "Light Tan (20CB)" "Mazda Tan(Orignal Color 15CB)"|-||-|||-||KEEAUTOPMXMI23|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - StayFast Economy One Plastic Window 1990-2005 - Sale |,|KEE-CF4126WC-XX|,|1,437.00|,|764.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - StayFast Economy One Plastic Window
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the glass is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, a feature that some other manufacturers don't offer.
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Kee Auto StayFast Economy Top with 1 plastic window that has heat-sealed detail and original style prepunched retainer pieces.
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|"Select Color" "Select Here" "Black (14SF)" "Beige (03SF)" "Dark Blue (16SF)" "Claret (11SF)" "Bordeaux (46SF)"|-||-|||-||KEEAUTOPMXMI4|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - StayFast Economy Three Plastic Window 1990-2005 - Sale |,|KEE-CF4105WC|,|600.00|,|549.95|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - StayFast Economy Three Plastic Windows
DISCONTINUED
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the glass is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, a feature that some other manufacturers don't offer.
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Kee Auto StayFast Economy Top with 3 plastic windows heat-sealed into top (no separate zippered window) and original style prepunched retainer pieces.
|,|"Select Color" "Select Here" "Black" "Beige" "Dark Blue"|-||-|||-||KEEAUTOPMXMI14|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - StayFast Economy Tinted Glass Window 1990-2005 - Sale |,|KEE-CF4099TN-XX|,|1,039.00|,|798.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - StayFast Economy Tinted Glass Window 1990-2005
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the glass is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, an option that some other manufacturers don't offer.
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Kee Auto StayFast Economy Top with tinted glass window heatsealed into pocket for added strength, matching binding around rear window, no zipper, original style prepunched retainer pieces. Available only in Black.
Fits earlier 89-98 models complete with necessary straps and instructions for conversion.(OE for 1999-05 Only)
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|"Select Color" "Select Here" "Black (14SF)" "Beige (03SF)" "Dark Blue (16SF)" "Claret (11SF)" "Bordeaux (46SF)"|-||-|||-||KEEAUTOPMXMI13|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - StayFast Economy Tinted Glass Window with Defroster 1990-2005 - Sale |,|KEE-CF4099DF-XX|,|1,465.00|,|802.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - StayFast Economy Tinted Glass Window with Defroster 1990-2005
This top is constructed of the same premium grade materials as the Kee Auto Original tops but the design is a little different. The economy is a one piece design that does not have the zipper in the rear, instead the glass is installed directly in to the top. Some think that this design results in better visibility in the NA(90-97) cars. The economy soft top for the Miata is available in both Cabrio and StayFast options, an option that some other manufacturers don't offer.
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Top with tinted glass DEFROSTER window heatsealed into pocket for added strength, matching binding around rear window, no zipper, original style prepunched retainer pieces. (economy)
Fits earlier 1989-1998 models complete with necessary straps and instructions for conversion. (OE for 1999-2005 Only)
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|"Select Color" "Select Here" "Black (14SF)" "Beige (03SF)" "Dark Blue (16SF)" "Claret (11SF)" "Bordeaux (46SF)"|-||-|||-||KEEAUTOPMXMI|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - StayFast One Plastic Window Original Style with Zipper 1990-2005 - Sale |,|KEE-CF4214WC-XX|,|1,474.00|,|802.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - StayFast Original One Plastic Window Original Style with Zipper
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Kee Auto StayFast Original Top with 1 plastic zip down window that has heat-sealed detail, single pull ring and original style prepunched retainer pieces.
The Original Style top is made in the style of the OEM convertible top. The Original Style top will install to your car in the same way the original top does and is the same quality and look as the OEM top too. This is one of the best Miata tops on the market today.
|,|"Select Color" "Select Here" "Black (14SF)" "Beige (03SF)" "Dark Blue (16SF)" "Claret (11SF)" "Bordeaux (46SF)"|-||-|||-||KEEAUTOPMXMI10|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - StayFast Original Style Tinted Glass Window with Defroster 1990-2005 - Sale |,|KEE-CF4051DF-XX|,|1,759.00|,|922.02|,||,||,|5.000 |,||,||,||,| Kee Auto Top MX-5 Miata Convertible - StayFast with Tinted Defroster Glass Window with Zipper 1990-2005
This is the top-of-the-line original glass top for the 1990-2005 Miatas. It has the rear tinted glass window with the defroster! Don't mess with the rest, go with the best with this top.
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Kee Auto StayFast Top with tinted glass DEFROSTER window heatsealed into pocket for added strength, matching binding around rear window, no zipper, original style prepunched retainer pieces.
For Mazda MX-5 Miata Years: 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|"Select Color" "Select Here" "Black (14SF)" "Beige (03SF)" "Dark Blue (16SF)" "Claret (11SF)" "Bordeaux (46SF)"|-||-|||-||KEEAUTOPMXMI6|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - StayFast Tinted Defroster Glass Window with Zipper 1990-2005 - Sale |,|KEE-CF4102DF-XX|,|1,798.00|,|892.02|,||,||,|5.000 |,||,||,||,| Kee Auto Top MX-5 Miata Convertible - StayFast with Tinted Defroster Glass Window with Zipper 1990-2005
This is the top-of-the-line non-original glass top for the 1990-2005 Miatas. It has the rear tinted glass window with the zipper for ease of use along with the defroster! Don't mess with the rest, go with the best with this top.
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Kee Auto StayFast Top with tinted glass DEFROSTER window (zip down with single pull ring) and original style prepunched retainer pieces. (wiring may be necessary).
|,|"Select Color" "Select Here" "Black (14SF)" "Beige (03SF)" "Dark Blue (16SF)" "Claret (11SF)" "Bordeaux (46SF)"|-||-|||-||KEES-NC-STAYFAST-TOP|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - Stayfast Tinted Glass Defrosted Window 2006-2015 - Sale |,|KEE-CF4140DF-SF|,|1,885.00|,|972.02|,||,||,|5.000 |,||,||,||,|Kee Auto Top MX-5 Miata Convertible - StayFast Tinted Glass Defrosted Window 2006-2015
Top w/tinted glass DEFROSTER window heat sealed into pocket for added strength, one piece top no deck seams & no zipper, prepunched retainer pieces, sewn in rain gutters as original
The Original Style top is made in the style of the OEM convertible top. The Original Style top will install to your car in the same way the original top does and is the same quality and look as the OEM top too. This is one of the best Miata tops on the market today.
|,|"Color" "Select Here" "Black (14SF)" "Lt. Neutral (06SF)" "Brown (17SF)" "Brick (44SF)"|-||-|||-||KEEAUTOPMXMI8|,|SHOP-BY-SALE|,|Kee Auto Top MX-5 Miata Convertible - StayFast Tinted Glass Window with Zipper 1990-2005 - Sale |,|KEE-CF4102TN-XX|,|1,643.00|,|812.02|,||,||,|5.000 |,||,||,||,| Kee Auto Top MX-5 Miata Convertible - StayFast Tinted Glass Window with Zipper 1990-2005
This is the top-of-the-line non-original glass top for the 1990-2005 Miatas. It has the rear tinted glass window with the zipper for ease of use! Don't mess with the rest, go with the best with this top.
The benefits of the StayFast Cloth over the vinyl are that aside from the elegant look, StayFast Cloth helps reduce road noise better than vinyl, lasts longer, and is also more resistant to temperature extremes.
Kee Auto StayFast Top with tinted glass window (zip down with single pull ring) and original style prepunched retainer pieces. Only Available in Black.
|,|"Select Color" "Select Here" "Black (14SF)" "Beige (03SF)" "Dark Blue (16SF)" "Claret (11SF)" "Bordeaux (46SF)"|-||-|||-||KEBBPA|,|OWNERS-SHOWCASE|,|Keith B
Mechanicsburg Pa|,|101-111|,||,||,||,||,||,||,||,||,|I just wanted to say thanks for your excellent service. My Katzkin install is finished on my 99 Emerald Mica NB. The seats are just beauiful in Black w/Steel Suedzskin inserts. Please feel free to use these pictures in anyway you like. When it gets warmer here I will send a picture of my whole car for the owners showcase.
Thanks again
Keith B
Mechanicsburg Pa
|,|||-||KENTRUSSELL|,|OWNERS-SHOWCASE|,|Kent Russell
Orem UT|,|newitem109927817|,||,||,||,||,||,||,||,||,|1991 Red Mazda Miata with the Racing Beat Type II Nose Kit from Go Miata.
Also just added Robbins SunFast Cloth Top w/ Standard Glass Window from Go Miata.
Check out the picture before the new paint and new Racing Beat Type II Nose Kit from Go Miata.
What a difference!
Kent Russell
Orem UT
|,|||-||KEVIN123|,||,|KEVIN MCGOWEN MARKETING DIRECTOR Kevin@GoMiata.com|,||,||,||,||,||,||,||,||,||,||,|||-||KEMCWAMA|,||,|KEVIN MCGOWEN
MARKETING MANAGER
Kevin@GoMiata.com|,|newitem144971909|,||,||,||,||,||,||,||,||,||,|Kevin McGowen: Warehouse Manager|-||-|||-||KITSACCESORIES|,|SHOP-BY-TOP-MIATA-BRANDS-ZYMOL|,|Kits & Accesories|,||,||,||,||,||,||,||,||,||,||,|||-||61-2361|,|KONIG|,|Konig Dekagram Gloss Bronze, Matte Black|,|61-2361|,|248.00|,|169.00|,||,||,||,||,||,||,|Konig Dekagram Gloss Bronze or Matte Black
The Dekagram is a lightweight, 10-spoke design that is developed with flow forming technology that offers benefits for both track and street use.
Motorsport inspired, the Dekagram's spoke profile design lends to efficient brake cooling as well as exceptional brake caliper clearance.
With any wheel Konig develops with Flow Forming Technology, the end result is stronger, lighter and offers greater elongation and shock resistance than a traditional cast design. The Dekagram is finished in a Good-Win Racing exclusive Gloss Bronze.
Brake Fitment:
Fits over Wilwood 11" BBK, our 11" Version 4 BBK, and our 11.75" Version 5 BBK. May fit other big brake kits.
Brian's Notes: This color proved instantly popular on new Konig Ampliform so we applied it to Dekagram as a custom order for Good-Win Racing, team favorite color for this new wheel.
|,|"Select Color" "Select Here" "Gloss Bronze" "Matte Black"|-||-|"Select Size" "Select Here" "15x7.5 +35mm Offset" "15x8 +25mm Offset add(+$25)" "15x9 +35mm Offset add(+$35)"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||61-1393|,|KONIG|,|Konig Dial In Gloss Black|,|61-1393|,|210.00|,|169.00|,||,||,||,||,||,||,|Konig Dial In
* 15x7 4x100
* +35 offset
* 10.9 lbs
* Flow Formed construction
* 73mm center bore
* Clear coated finish
* Cap included
* Valves not included
* Best Tire Fitments: 195/50/15, 205/50 tires.
* 15x8 4x100
* +25 offset
* 12+ lbs
* Flow Formed construction
* 73mm center bore
* Clear coated finish
* Cap included
* Valves not included
* Clears our BIG BRAKE KITS!
* Fits 205/50/15, 225/45 tires.
|,|"Select Size" "Select Here" "15 x 7" "15 x 8 add(+$25)"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||61-1390|,|KONIG|,|Konig Dial In Grey|,|61-1390|,|210.00|,|169.00|,||,||,||,||,||,||,|Konig Dial In
* 15x7 4x100
* +35 offset
* 10.9 lbs
* Flow Formed construction
* 73mm center bore
* Clear coated finish
* Cap included
* Valves not included
* Best Tire Fitments: 195/50/15, 205/50 tires.
* 15x8 4x100
* +25 offset
* 12 lbs
* Flow Formed construction
* 73mm center bore
* Clear coated finish
* Cap included
* Valves not included
* Clears our BIG BRAKE KITS!
* Fits 205/50/15, 225/45 tires.
|,|"Select Size" "Select Here" "15 x 7" "15 x 8 add(+$25)"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||MAZDA-MX-5-MIATA-KONIG-FEATHER-GOLD-GLOSS-FINISH-WHEELS-TIRES-PARTS|,|MAZDA-MX-5-MIATA-KONIG-WHEELS-TIRES-PARTS-1999-2005|,|Konig Feather Gold Gloss Finish|,|Miata-Konig-Feather-Gold-Gloss-Finish|,|155.00|,|135.00|,||,||,|5.000 |,||,||,||,|Konig Feather Gold Gloss Finish
Konig combines over fifteen years' experience with track-tested innovation to create the industry's most coveted wheels. Sought by professionals for their superb quality and craftsmanship, recognized by enthusiasts for their great value and admired by all for their styling, Konig wheels are one of today's most popular brands. Discount Tire offers Konig wheel styles at value prices. Give us a call on the entire line of accessories. You will find that many of the styles have a very wide size range so you can tailor the wheel selection to fit your budget and size preference.
|,|"Select Diameter" "17.0"|-||-|"Select Width" "7.0"|-||-|"Select Bolt Pattern" "4-100.0mm"|-||-|"Select offset" "40"|-||-|||-||61-2557|,|KONIG|,|Konig Freeform Matte Silver, Radium Bronze |,|61-2557|,|216.00|,|165.00|,||,||,||,||,||,||,|Konig Freeform Matte Silver or Radium Bronze
The Konig Freeform is an all flow formed wheel design from Konig for 2019.
Takes optional 73mm hub ring available separately on this site.
Motorsport inspired, the Freeform's spoke profile design lends to efficient brake cooling as well as exceptional brake caliper clearance.
With any wheel Konig develops with Flow Forming Technology, the end result is stronger, lighter and offers greater elongation and shock resistance than a traditional cast design.
|,|"Select Color" "Select Here" "Matte Silver" "Radium Bronze"|-||-|"Select Size" "Select Here" "15x7.5 +35mm Offset" "15x8 +25mm Offset add(+$35)" "15x9.5 +29mm Offset add(+$45)"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||MAZDA-MX-5-MIATA-KONIG-WHEELS-TIRES-PARTS-1999-2005|,|SHOP-BY-TOP-MIATA-BRANDS|,|Konig Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||KONIG|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Konig Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||KONIG-REWIND|,|CHWH|,|KONIG® - REWIND Silver with Machined Lip |,|KONIG-REWIND|,|265.00|,|185.95|,||,||,||,||,||,||,|KONIG® - REWIND Silver with Machined Lip
REWIND Silver with Machined Lip Wheels by KONIG®. Main Line Wheels are built upon the most forward styling and an uncompromising level of quality, durability, and performance that hardcore tuning and speed junkies have grown to expect from Konig. Blending refined luxury with sporty aggressiveness, exquisite Konig rims are built not for the mainstream, but for the wicked. These high-end rims are a sure way to adjust your vehicle's appearance and performance from mild to wild.
Features:
Forward-styled modern take on traditional design and aesthetics.
Bond to add an extraordinary aggressive edge to the look of your ride. Track proven and street driven to deliver astounding performance. Cast from superior-grade materials to last you for billions of miles to come. Built to exact vehicle specifications for a perfect custom fit. Cutting-edge design available in a range of advanced finish options. Made to meet or exceed the highest standards for quality and reliability.
|,|"Select Size" "Select Here" "15x7 20 offset 4x100" "15x7 40 offset 4x100 add(+$25)"|-||-|"Shipping & Handling" "add(+$40)"|-||-|||-||KOK1RASI15|,|KOSEIWHEELS|,|Kosei K1 Racing 15x7 Silver Painted|,|TR-KOSEIK115x7|,|185.99|,|165.02|,||,||,|5.000 |,||,||,||,|Kosei K1 Racing 15x7
Front and Rear
* Size: 15x7
* Backspacing: 5.50"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 13.5lbs
* Offset: 25mm/38mm
* Construction: 1pc. Low Pressure Cast/Shot Peened
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Select Offset" "Select Here" "25mm" "38mm"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||K1-RACING-BLACK|,|KOSEIWHEELS|,|Kosei K1 Racing BLACK 15x7|,|k1-racing-black|,|189.99|,|169.02|,||,||,||,||,||,||,|Kosei K1 Racing BLACK 15x7
Front and Rear
-Size:15x7
-Offset:25mm/38mm
-Backspacing:5.55"
-Bolt Pattern:4-100
-Rec. Tire Size:195/55-15
-Weight:13.0 lbs.
-Finish:Gloss Black Painted
-Construction:Not Available
-Finish Warranty:1 Year
*Price per rim. Order quantity 4 for full set*
|,|"Select Offset" "Select Here" "25mm" "38mm"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||KOK1TSLIGR17|,|KOSEIWHEELS|,|Kosei K1 TS Light Grey 17x7|,|TR-KOSEITS17x7|,|266.99|,|212.50|,||,||,|5.000 |,||,||,||,|Kosei K1 TS Light Grey 17x7
Front and Rear
* Size: 17x7
* Offset: 42mm
* Backspacing: 5.65"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 9.3lbs
* Finish: Light Grey
* Construction: 1pc. Low Pressure Cast
* Finish Warranty: 1 Year
* Manufactured in Japan
*Price per rim. Order quantity 4 for full set*
|,|"Shipping & Handling" "add(+$45)"|-||-|||-||KOSEIWHEELS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|Kosei Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||KUECAST1982H|,|KUMHOTIRE|,|Kumho Ecsta PA31 - 195/50R-15 |,|Kumho-Ecsta-PA31|,|139.99|,|115.02|,||,||,|5.000 |,||,||,||,|Kumho Ecsta PA31 - 195/50R-15
The Ecsta PA31 (Performance All-Season) is Kumho's High Performance All-Season tire developed for drivers of mid-level sports cars, sporty coupes and high-performance sedans looking to combine everyday street performance with treadwear. Designed to provide high performance handling in wet and dry conditions, the Ecsta PA31 delivers Kumho's unparalleled combination of ride comfort, low noise and all-season traction, even in light snow.
Ecsta PA31 tires feature an advanced technology tread compound that blends high performance handling and all-season traction with long treadwear. Its compound is molded into a mildly directional tread design that promotes even wear, responsive steering, cornering stability and braking traction in all-season conditions. The directional tread design's four circumferential and multiple cross grooves help expel water quickly to resist hydroplaning and improving wet weather traction while high sipe density and tread block edges enhance wet weather handling and wintertime snow traction.
The tire's internal structure features Kumho's ESCOT Technology to enhance steering response and increase treadlife by optimizing cord tension distribution in the sidewall.
|,|"Shipping & Handling" "add(+$39.99)"|-||-|||-||KUMHO-ECSTA-PS31|,|KUMHOTIRE|,|Kumho Ecsta PS31 - 195/50R-15 |,|Kumho-Ecsta-PS31|,|149.99|,|111.02|,||,||,||,||,||,||,|Kumho Ecsta PS31 - 195/50R-15
The Ecsta PS31 is Kumho's Ultra High Performance Summer tire developed for drivers who emphasize handling and performance in dry and wet conditions for their sports cars, sporty coupes and performance sedans. Like all summer tires, the Ecsta PS31 is not intended to be driven in near freezing temperatures, through snow or on ice.
Kumho Ecsta PS31A high-technology summer compound features High Dispersible Micro Silica for a more even distribution of silica throughout the contact patch and High Grip Resin to enhance dry and wet traction. The compound is molded into a directional tread pattern with a solid center rib for improved high-speed stability and 3D Dimple Design heat dimples help minimize heat buildup in the tread blocks, increasing durability for reduced wear. Optimized lateral groove angles resist irregular wear while maximizing water displacement during wet-weather cornering, and the four wide, circumferential main grooves work with diagonal-sipe microgrooves to evacuate water from the footprint for hydroplaning resistance.
The tire features a computer-simulated structure to provide uniform contact pressure for even wear, and the reinforced internal construction includes a two-ply polyester casing beneath twin wide, steel belts and two full layer nylon cap plies for improved impact resistance, high-speed handling and durability.
|,|"Shipping & Handling" "add(+$39.99)"|-||-|||-||KUMHOTIRE|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Kumho Tire|,||,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-KYB|,|SHOP-BY-TOP-MIATA-BRANDS|,|KYB|,||,||,||,||,||,||,||,||,||,||,|||-||KYBAGXSHOCAB|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|KYB AGX 8 Way Adjustable Miata Shock Absorber 1990-1997|,|304-015|,|260.00|,|112.99|,||,||,|5.000 |,||,|dfhadha|,||,|KYB AGX 8 Way Adjustable Miata Shock Absorber 1990-1997
KYB AGX™ Adjustable Gas Shocks allow Miata drivers to adjust damping to match specific driving conditions.
They feature:
* Manually adjustable 8 stage damping.
* Adjusts from street to strip to track in seconds.
* No need to lift vehicle or use special tools.
* Competition grade engineering and construction.
Price is per shock.
Please update quantity in your shopping cart to 2 front and 2 rear for a complete set.
|,|"Select Shock" "Front Shock" "Rear Shock"|-||-|||-||KYBAGXADSHOC|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|KYB AGX Adjustable Shock Absorber 1999-2005|,|304-035|,|260.00|,|142.95|,||,||,|5.000 |,||,|sghsh|,||,|KYB AGX™ Adjustable Gas Shocks allow Miata drivers to adjust damping to match specific driving conditions.
They feature:
Manually adjustable 8 stage damping.
Adjusts from street to strip to track in seconds.
No need to lift vehicle or use special tools.
Competition grade engineering and construction.
Price is per shock.
Please update quantity in your shopping cart to 2 front and 2 rear for a complete set.
|,|"Select" "Front Shock" "Rear Shock"|-||-|||-||LAGUNA-TURN-OUT-BAFFLE-INSERT-FOR-ROADSTERSPORT-MIATA-MUFFLERS|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Laguna Turn-Out Baffle Insert for RoadsterSport Miata Mufflers 2016-2020|,|60-13242ND|,|59.99|,|49.00|,||,||,||,||,||,||,|Laguna Turn-Out Baffle Insert for RoadsterSport Miata Mufflers 2016-2020
Made to fit RoadsterSport mufflers only, allows you to point exhaust left or right AWAY from sound microphones at autocross and track events. Intended for our Race mufflers but can be used with any of our RoadsterSport mufflers. Perhaps the most famous place for these is Mazda Raceway Laguna Seca, which sometimes has days where loud is allowed, and sometimes has days with very low sound limits. Very useful for pointing your sound away from microphones, making measured sound DB level much lower. Includes a bolt and lock washer, pipe is threaded both sides so you can easily flip it and point it either left or right. Handy item for the rainy day events when all car measure higher DB than they otherwise normally would.
Note: does not fit mufflers with twin tips right beside each other, ie ND Twin Tip Super Q and Twin Tip Super Street.
|,|"Drop-ship fee" "add (+$9)"|-||-|||-||MO30LEDDARUL|,|NBACCESSORIES|,|LED High Power LED Daytime Running Lights Driving Lamp|,|LAMLEDDRL|,|150.00|,|94.02|,||,||,|0.000 |,||,||,||,|LED High Power LED Daytime Running Lights Driving Lamp
-Shockproof, waterproof and corrosion resistant
-Improve your safety and style on the road, increasing your visibility day and night
-Universal for all vehicle. Please make sure that you measure the dimensions of your application prior to purchasing to ensure they fit
-Package includes: 2x Daytime Running lights, Size: 6.69 x 1.18 x 0.86 in, Color: White
Feature: This LED Daytime Running Lights is an universal fit for any cars LED lamp-house, low power consumption,100% Brand New. Bright LED consumes far less power than a standard bulb while maintaining optimal light output. Attractive slim design and adjustable bracket that fits various car models. Easy to use .Easy and simple to install Bright with super beam daytime running light to driving safety. Longer life LED lifetime up to 50,000 hours minimal maintenance cost. Enhance total appearances Extra cool white beam enhances to total appearance to your car Daytime running light improves safety while driving allows your vehicle to be seen at much further distances. Greatly improves reaction time of oncoming motorists in an incident. Caution: Disconnect power before installation. Handle the set with car cations: Light color available: White Material: Aluminum housing Number of bulbs(each): LEDs Vehicle Application: Universal Size: 165mm X 40mm X 22mm (L x W x H ) Life: 500000 hours Bulb Color temp: 6000K,700 Rated Working voltage: DC 12V Package Include: 2Pcs LED Daytime Running Light Installation accessories
|,|||-||NONAME8|,||,|Let us never forget...|,|09-11-2001|,|911.01|,||,||,||,|0.000 |,||,||,||,||,|||-||LELSCO|,|SHOP-BY-TOP-MIATA-BRANDS-COVERCRAFT|,|Lexus LS460L Covercraft|,|C16993PG|,|691.00|,|384.18|,||,||,|0.000 |,||,||,||,|Lexus LS460L Covercraft
|,|"Car Cover Cable and Lock" "No thanks" "Yes, I want security from theft add (+$9.95)"|-||-|"Storage Bag" "No thanks" "Yes, I need a storage bag add (+$14.95)"|-||-|||-||LICENSE2BLING1|,|SHOP-BY-TOP-MIATA-BRANDS|,|License 2 Bling|,||,||,||,||,||,||,||,||,||,||,|||-||256MISEFRAUB|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling 256 Midnight Series Frame - Aurore Boreale (Iridescent) Crystals|,|256-BK-AB|,|109.99|,|94.99|,||,||,|0.000 |,||,||,||,|License 2 Bling 256 Midnight Series Frame - Aurore Boreale (Iridescent) Crystals
Product includes Torx Security Bolts and black screw caps.
The new License2Bling Midnight Series features the same construction as our famous 256 frame, but with an all new matte black automotive paint finish!
The 256 Midnight Series Frame features, like all License2Bling products, genuine Swarovski crystals. Colors include classic Ice, Red, and Aurore Boreale. New colors are Black Ice (an opaque glossy crystal) and Rose (a richer version of Light Pink).
|,|||-||256MISEFRBLC|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling 256 Midnight Series Frame - Black Crystals|,|256-BK-BLK|,|109.99|,|94.99|,||,||,|0.000 |,||,||,||,|License 2 Bling 256 Midnight Series Frame - Black Crystals
Product includes Torx Security Bolts and black screw caps.
The new License2Bling Midnight Series features the same construction as our famous 256 frame, but with an all new matte black automotive paint finish!
The 256 Midnight Series Frame features, like all License2Bling products, genuine Swarovski crystals. Colors include classic Ice, Red, and Aurore Boreale. New colors are Black Ice (an opaque glossy crystal) and Rose (a richer version of Light Pink).
|,|||-||256MISEFRRED|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling 256 Midnight Series Frame - Red Crystals|,|256-BK-RED|,|109.99|,|94.99|,||,||,|0.000 |,||,||,||,|License 2 Bling 256 Midnight Series Frame - Red Crystals
Product includes Torx Security Bolts and black screw caps.
The new License2Bling Midnight Series features the same construction as our famous 256 frame, but with an all new matte black automotive paint finish!
The 256 Midnight Series Frame features, like all License2Bling products, genuine Swarovski crystals. Colors include classic Ice, Red, and Aurore Boreale. New colors are Black Ice (an opaque glossy crystal) and Rose (a richer version of Light Pink).
|,|||-||256SERHFRAUB|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling 256 Series Rhinestone Frame - Aurore Boreale (Iridescent) Crystals|,|256-CR-AB|,|109.99|,|79.99|,||,||,|0.000 |,||,||,||,|License 2 Bling 256 Series Rhinestone Frame - Aurore Boreale (Iridescent) Crystals
Product includes Torx Security Bolts and chrome screw caps.
Make other cars jealous with the License2Bling 256 Series Frame! The 256 Series is similar to the VIP but with, as the name implies, 256 genuine Swarovski crystals. With rounded edges, mirror-like triple chroming and heavy-duty construction, the L2B 256 Series will be your car's new favorite accessory.
The 256 Series is available in multiple beautiful colors. When seen in the sun, the Swarovski crystal shines in brilliance due to its multiple facets and exclusive colors. No other crystal in the world shines like Swarovski!
Due to popular demand, VIP frames are now available in Aurore Boreale, Light Sapphire and Red!
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovski has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. L2B is pleased to be partnered with Swarovski. From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each L2B chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. L2B is the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,|||-||256SERHFRICE|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling 256 Series Rhinestone Frame - Ice Crystals|,|256-CR-ICE|,|109.99|,|79.99|,||,||,|0.000 |,||,||,||,|License 2 Bling 256 Series Rhinestone Frame - Ice Crystals
Product includes Torx Security Bolts and chrome screw caps.
Make other cars jealous with the License2Bling 256 Series Frame! The 256 Series is similar to the VIP but with, as the name implies, 256 genuine Swarovski crystals. With rounded edges, mirror-like triple chroming and heavy-duty construction, the L2B 256 Series will be your car's new favorite accessory.
The 256 Series is available in multiple beautiful colors. When seen in the sun, the Swarovski crystal shines in brilliance due to its multiple facets and exclusive colors. No other crystal in the world shines like Swarovski!
Due to popular demand, VIP frames are now available in Aurore Boreale, Light Sapphire and Red!
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovski has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. L2B is pleased to be partnered with Swarovski. From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each L2B chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. L2B is the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,|||-||256SERHFRLIP|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling 256 Series Rhinestone Frame - Light Pink Crystals|,|256-CR-PINK|,|109.99|,|79.99|,||,||,|0.000 |,||,||,||,|License 2 Bling 256 Series Rhinestone Frame - Light Pink Crystals
Product includes Torx Security Bolts and chrome screw caps.
Make other cars jealous with the License2Bling 256 Series Frame! The 256 Series is similar to the VIP but with, as the name implies, 256 genuine Swarovski crystals. With rounded edges, mirror-like triple chroming and heavy-duty construction, the L2B 256 Series will be your car's new favorite accessory.
The 256 Series is available in multiple beautiful colors. When seen in the sun, the Swarovski crystal shines in brilliance due to its multiple facets and exclusive colors. No other crystal in the world shines like Swarovski!
Due to popular demand, VIP frames are now available in Aurore Boreale, Light Sapphire and Red!
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovski has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. L2B is pleased to be partnered with Swarovski. From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each L2B chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. L2B is the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,|||-||AMERICANFLAG|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling American Flag|,|FLAG-USA|,|49.99|,|39.99|,||,||,|0.000 |,||,||,||,|License 2 Bling American Flag
The License2Bling American Flag is a true testament to your patriotism. Featuring the same jewelry-like construction and Swarovski crystals as our premier VIP license plate frames, the License2Bling Flag must be seen to believed.
With 234 Swarovski crystals and expert craftsmanship, the visual effect is stunning. Be prepared for compliments -- placing the License2Bling flag on your car is sure to attract attention!
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovski has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. L2B is pleased to be partnered with Swarovski From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each L2B chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. L2B is the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,|||-||BLCARCILI|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Bling Car Cigarette Lighter|,|LIGHTER|,|39.99|,|29.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Bling Car Cigarette Lighter
The License2Bling Cigarette Lighter features embedded crystals in a silver finish. Ditch the plastic lighter and add some sparkle to your life!
|,|||-||BLVACO|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Bling Valve Covers|,|CRYSTAL-VALVE|,|39.00|,|29.95|,||,||,|0.000 |,||,||,||,|License 2 Bling Bling Valve Covers
License 2 Bling Bling Valve Covers add a touch of bling to your tires. Simply replace your old plastic valve caps with the chromed crystal caps and you'll have an instant bling upgrade.
|,|||-||GRFRCA|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Graphic Frame - California|,|MOD2-CALI|,|119.99|,|99.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Graphic Frame - California
Show your California Love with this beautiful Cali frame! Our new Graphic Series frames are perfect for anyone who wants an added touch of personality to their bling!
The frames feature:
- Two rows of embedded diamond shaped Swarowski crystals for unmatched brilliance and shine.
- "California" design engraved with a high-precision laser on the highest grade acrylic
In other words, this is the best quality that your money can buy!
Available in:
- Chrome finish with Ice (clear) crystals
- Chrome finish with Rose crystals
- Black matte finish with Black crystals
|,|"Select Crystal Color""Ice""Rose""Black"|-||-|||-||GRFRKI|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Graphic Frame - Kitty |,|MOD2-CAT|,|119.99|,|99.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Graphic Frame - Kitty
Let the whole world know that you love your kitty with this adorable kitten frame! Our new Graphic Series frames are perfect for anyone who wants an added touch of personality with their bling!
The frames feature:
- Two rows of embedded diamond shaped Swarowski crystals for unmatched brilliance and shine.
- "Kitten" design engraved with a high-precision laser on the highest grade acrylic.
In other words, this is the best quality that your money can buy!
Available in:
- Chrome finish with Ice (clear) crystals
- Chrome finish with Rose crystals
- Black matte finish with Black crystals
|,|"Select Crystal Color"
Ice
Rose
Black|-||-|||-||GRFRPA|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Graphic Frame - Paws|,|MOD2-PAWS|,|119.99|,|99.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Graphic Frame - Paws
Let the whole world know that you love your pet by taking their paw prints with you everywhere you go! Our new Graphic Series frames are perfect for anyone who wants an added touch of personality with their bling!
The frames feature:
- Two rows of embedded diamond shaped Swarowski crystals for unmatched brilliance and shine.
- "Paw Print" design engraved with a high-precision laser on the highest grade acrylic.
In other words, this is the best quality that your money can buy!
Available in:
- Chrome finish with Ice (clear) crystals
- Chrome finish with Rose crystals
- Black matte finish with Black crystals
|,|"Select Crystal Color"
Ice
Rose
Black|-||-|||-||GRFRPR|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Graphic Frame - Princess|,|MOD2-PRINCESS|,|119.99|,|99.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Graphic Frame - Princess
Time to let the world know that a true Princess is behind the wheel! Show your playful and sexy side with our new Graphic series frames. These are perfect for anyone who wants an added touch of personality and attitude with their bling!
The frames feature:
- Two rows of embedded diamond shaped Swarowski crystals for unmatched brilliance and shine.
- "Princess" design engraved with a high-precision laser on the highest grade acrylic.
In other words, this is the best quality that your money can buy!
Available in:
- Chrome finish with Ice (clear) crystals
- Chrome finish with Rose crystals
- Black matte finish with Black crystals
|,|"Select Crystal Color" "Ice" "Rose" "Black"|-||-|||-||GRFRPU|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Graphic Frame - Puppy|,|MOD2-DOG|,|119.99|,|99.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Graphic Frame - Puppy
Let the whole world know that you love your doggy with this adorable puppy frame! Our new Graphic Series frames are perfect for anyone who wants an added touch of personality with their bling!
The frames feature:
- Two rows of embedded diamond shaped Swarowski crystals for unmatched brilliance and shine.
- "Puppy" design engraved with a high-precision laser on the highest grade acrylic.
In other words, this is the best quality that your money can buy!
Available in:
- Chrome finish with Ice (clear) crystals
- Chrome finish with Rose crystals
- Black matte finish with Black crystals
|,|"Select Crystal Color"
Ice
Rose
Black|-||-|||-||GRFRSE|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Graphic Frame - Sexy|,|MOD2-SEXY|,|119.99|,|99.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Graphic Frame - Sexy
A sexy girl is never afraid to let the world know it! Show your playful side with our new Graphic Series frames. These are perfect for anyone who wants an added touch of personality and attitude with their bling!
The frames feature:
- Two rows of embedded diamond shaped Swarowski crystals for unmatched brilliance and shine.
- "Sexy" design engraved with a high-precision laser on the highest grade acrylic.
In other words, this is the best quality that your money can buy!
Available in:
- Chrome finish with Ice (clear) crystals
- Chrome finish with Rose crystals
- Black matte finish with Black crystals
|,|"Select Crystal Color "
"Ice" "Rose" "Black"|-||-|||-||GRFRZE|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Graphic Frame - Zebra|,|MOD2-ZEBRA|,|119.99|,|99.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Graphic Frame - Zebra
Take a walk on the wild side with this playful Zebra print frame! Our new Graphic Series frames are perfect for anyone who wants an added touch of personality and attitude with their bling!
The frames feature:
- Two rows of embedded diamond shaped Swarowski crystals for unmatched brilliance and shine.
- "Zebra" design engraved with a high-precision laser on the highest grade acrylic.
In other words, this is the best quality that your money can buy!
Available in:
- Chrome finish with Ice (clear) crystals
- Chrome finish with Rose crystals
- Black matte finish with Black crystals
|,|"Select Crystal Color"
"Ice""Rose""Black"|-||-|||-||SLSWFRAUBOIC|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Slimline Swarovski Frame - Aurore Boreale (Iridescent) Crystals|,|SLIM-CR-AB|,|89.99|,|69.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Slimline Swarovski Frame - Aurore Boreale (Iridescent) Crystals
Product includes Torx Security Bolts and chrome screw caps.
The License2Bling Slimline Frame features the same construction as our world-class VIP frame, but with a single row of large Swarovski crystals. Using our proprietary process, the crystals fit perfectly and shine with brilliance rivaled only by real diamonds. Once you see the License2Bling Slimline Series Frame, you'll know you've found your new car accessory.
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovsk has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. L2B is pleased to be partnered with Swarovski. From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each L2B chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. L2B is the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,|||-||SLSWFRICECCR|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Slimline Swarovski Frame - Ice (Clear) Crystals|,|SLIM-CR-ICE|,|89.99|,|69.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Slimline Swarovski Frame - Ice (Clear) Crystals
Product includes Torx Security Bolts and chrome screw caps.
The License2Bling Slimline Frame features the same construction as our world-class VIP frame, but with a single row of large Swarovski crystals. Using our proprietary process, the crystals fit perfectly and shine with brilliance rivaled only by real diamonds. Once you see the License2Bling Slimline Series Frame, you'll know you've found your new car accessory.
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovsk has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. L2B is pleased to be partnered with Swarovski. From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each L2B chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. L2B is the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,||-||-|||-||SWRI|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Swarovski Ribbon - Pink|,|RIBBON-PINK|,|39.99|,|29.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Swarovski Ribbon - Pink
Because we at Go Miata and License2Bling support numerous causes, we wanted a way to gain support in the most visually noticeable way possible. With our proprietary construction, jewelry-like craftsmanship and 74 Genuine Swarovski crystals, the License2Bling Ribbons are the best way to show your support.
Displaying a License2Bling ribbon on your car is a sure-fire way to draw attention to your cause. With the large, multi-faceted Swarovski crystals and custom jewelry-like craftsmanship, the License2Bling ribbons are stunning pieces that won't go unnoticed. Not only are License2Bling ribbons perfect for your car, but also for other creative locations like laptops, doors and binders. Show your support by placing L2B Ribbons everywhere!
The L2B Ribbons are available with pink crystals to support Breast Cancer Research or yellow crystals to show support for our troops. Best of all, a portion of proceeds go to support the corresponding cause. Additionally, L2B ribbons are available in red, white and blue to show your American support.
|,|||-||SWRIRED|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Swarovski Ribbon - Red|,|RIBBON-RED|,|39.99|,|29.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Swarovski Ribbon - Red
Because we at Go Miata and License2Bling support numerous causes, we wanted a way to gain support in the most visually noticeable way possible. With our proprietary construction, jewelry-like craftsmanship and 74 Genuine Swarovski crystals, the License2Bling Ribbons are the best way to show your support.
Displaying a License2Bling ribbon on your car is a sure-fire way to draw attention to your cause. With the large, multi-faceted Swarovski crystals and custom jewelry-like craftsmanship, the License2Bling ribbons are stunning pieces that won't go unnoticed. Not only are License2Bling ribbons perfect for your car, but also for other creative locations like laptops, doors and binders. Show your support by placing L2B Ribbons everywhere!
The L2B Ribbons are available with pink crystals to support Breast Cancer Research or yellow crystals to show support for our troops. Best of all, a portion of proceeds go to support the corresponding cause. Additionally, L2B ribbons are available in red, white and blue to show your American support.
|,|||-||SWRIREWHANDB|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Swarovski Ribbon - Red, White and Blue (USA)|,|RIBBON-RWB|,|39.99|,|29.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Swarovski Ribbon - Red, White and Blue (USA)
Because we at Go Miata and License2Bling support numerous causes, we wanted a way to gain support in the most visually noticeable way possible. With our proprietary construction, jewelry-like craftsmanship and 74 Genuine Swarovski crystals, the License2Bling Ribbons are the best way to show your support.
Displaying a License2Bling ribbon on your car is a sure-fire way to draw attention to your cause. With the large, multi-faceted Swarovski crystals and custom jewelry-like craftsmanship, the License2Bling ribbons are stunning pieces that won't go unnoticed. Not only are License2Bling ribbons perfect for your car, but also for other creative locations like laptops, doors and binders. Show your support by placing L2B Ribbons everywhere!
The L2B Ribbons are available with pink crystals to support Breast Cancer Research or yellow crystals to show support for our troops. Best of all, a portion of proceeds go to support the corresponding cause. Additionally, L2B ribbons are available in red, white and blue to show your American support.
|,|||-||SWRI1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling Swarovski Ribbon - Yellow|,|RIBBON-YLO|,|39.99|,|29.99|,||,||,|0.000 |,||,||,||,|License 2 Bling Swarovski Ribbon - Yellow
Because we at Go Miata and License2Bling support numerous causes, we wanted a way to gain support in the most visually noticeable way possible. With our proprietary construction, jewelry-like craftsmanship and 74 Genuine Swarovski crystals, the License2Bling Ribbons are the best way to show your support.
Displaying a License2Bling ribbon on your car is a sure-fire way to draw attention to your cause. With the large, multi-faceted Swarovski crystals and custom jewelry-like craftsmanship, the License2Bling ribbons are stunning pieces that won't go unnoticed. Not only are License2Bling ribbons perfect for your car, but also for other creative locations like laptops, doors and binders. Show your support by placing L2B Ribbons everywhere!
The L2B Ribbons are available with pink crystals to support Breast Cancer Research or yellow crystals to show support for our troops. Best of all, a portion of proceeds go to support the corresponding cause. Additionally, L2B ribbons are available in red, white and blue to show your American support.
|,|||-||VIPRHFRAUBOC|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling VIP Rhinestone Frame - Aurore Boreale Crystals|,|VIP-CR-AB|,|169.99|,|129.99|,||,||,|0.000 |,||,||,||,|License 2 Bling VIP Rhinestone Frame - Aurore Boreale Crystals
Product includes Torx Security Bolts and chrome screw caps.
The License2Bling VIP is the frame of choice for celebrities like Paris Hilton, Kim Kardashian, Scott Storch, Mya and more. Keep an eye out for the L2B VIP frame on cars -- they frequently adorn Bentleys, Hummers, BMWs and other premium vehicles.
Due to popular demand, VIP frames are now available in Aurore Boreale, Light Sapphire and Red!
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovski has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. We are pleased to be partnered with Swarovski. From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. We are the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,|||-||VIPRHFR|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling VIP Rhinestone Frame - Ice Crystals |,|VIP-CR-ICE|,|169.99|,|129.99|,||,||,|0.000 |,||,||,||,|License 2 Bling VIP Rhinestone Frame - Ice Crystals
Product includes Torx Security Bolts and chrome screw caps.
The License2Bling VIP is the frame of choice for celebrities like Paris Hilton, Kim Kardashian, Scott Storch, Mya and more. Keep an eye out for the L2B VIP frame on cars -- they frequently adorn Bentleys, Hummers, BMWs and other premium vehicles.
Due to popular demand, VIP frames are now available in Aurore Boreale, Light Sapphire and Red!
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovski has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. We are pleased to be partnered with Swarovski. From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. We are the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,|||-||VIPRHFRLIPIC|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|License 2 Bling VIP Rhinestone Frame - Light Pink Crystals|,|VIP-CR-PINK|,|169.99|,|129.99|,||,||,|0.000 |,||,||,||,|License 2 Bling VIP Rhinestone Frame - Light Pink Crystals
Product includes Torx Security Bolts and chrome screw caps.
The License2Bling VIP is the frame of choice for celebrities like Paris Hilton, Kim Kardashian, Scott Storch, Mya and more. Keep an eye out for the L2B VIP frame on cars -- they frequently adorn Bentleys, Hummers, BMWs and other premium vehicles.
Due to popular demand, VIP frames are now available in Aurore Boreale, Light Sapphire and Red!
Exclusively Swarovski
Each industry has its Rolex or Rolls Royce. In the crystal business, the ultimate is Swarovski. For over 100 years, Swarovski has provided jewelers with the most exquisite crystals for their pendants, necklaces and accessories. We are pleased to be partnered with Swarovski. From a distance and up close, nothing compares to genuine Swarovski crystals.
Chaton Crystals
In our quest to create the world's most beautiful frame, we chose the world's most beautiful crystal style, the "chaton." Unlike the standard "flat back" crystal, the pointed back chaton has more facets, brilliance and shine. Luxury jewelers use chaton crystals and diamonds exclusively. Nothing else comes close.
Expert Craftsmanship
An expert's touch is required to beautifully craft products using chatons. Rather than simply gluing a flat back crystal on a frame, each chaton crystal is hand fitted into the frame with jewelry-like precision. Once placed, the crystals sit flush in the frame, creating a stylish aesthetic. We are the only frame maker in the world to utilize this proprietary embedding process...and it shows.
|,|||-||MC-LIFELINE-FIRE--|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|LIFELINE 4.0L AFFF ELECTRIC ACTIVATION FIRE SUPPRESSION SYSTEM |,|MC-LifelineFire|,|954.05|,|799.90|,||,||,||,||,||,||,|LIFELINE 4.0L AFFF ELECTRIC ACTIVATION FIRE SUPPRESSION SYSTEM
Lifeline Zero 2000 systems are constructed using only the finest materials and are supplied complete with all of the components required for a professional installation. It performed supremely well in engine fire tests, and thus has full compliance with MSA, FIA and SCCA requirements.
Lifeline's range of FIA certified systems have been homologated by the FIA for use in International motorsport and has been awarded the homologation numbers EX.002.98 and EX.020.05. The FIA homologation requires that the systems be tested to the FIA standard for plumbed in fire systems. These tests were witnessed by the British Standards Institute and MSA.
Electric systems are activated by pressing a strategically mounted momentary push button. Using a military specification actuator to detonate the extinguisher, the actuator extends a steel pin upon activation breaking a frangible seal in the neck of the cylinder and thus discharging the contents. All electrical systems have their own independent power supply called a power pack that has facilities for checking the battery strength and circuit continuity as well as giving a visible indication that the system is armed.
This system comes complete with the following:
Power Pack (x 1)
Cockpit Switch (x 1)
External Switch (x 1)
Plug & Lead (x 2)
Zero 2000 Nozzle (x 4)
10mm Equal T Connector (x 3)
10mm Tube (x 5m)
Pipe Clip (x 5)
|,|||-||LIGHTGRAY|,||,|Light Gray|,|lightgray|,||,||,||,||,||,||,||,||,||,|||-||LIGHTOAKVINYL|,||,|Light Oak Vinyl|,|lightoakvinyl|,||,||,||,||,||,||,||,||,||,|||-||--HEADER-INSTALLATION-LONG-EXTENSION-CORD-FOR-SECOND-O2-SENSOR---FOR-USE-ONLY-WHEN-INSTALLING-HEADER|,|20MAMIEXVEAL|,|LONG extension cord for second O2 Sensor - for use ONLY when installing header into Miata already using ROADSTERSPORT or PPE MIDPIPE. 2006-2015|,|61-2918|,|109.00|,|64.00|,||,||,||,||,||,||,|LONG extension cord for second O2 Sensor - for use ONLY when installing header into Miata already using ROADSTERSPORT or PPE MIDPIPE. 2006-2015
This is an option for aftermarket headers to allow relocation of your second factory O2 sensor to a position after the catalytic converter in a midpipe so that your installation is easy PLUG AND PLAY. Note that the plugs for each sensor are unique so that it is impossible to mix them.
NOTE: This is only plug and play for those with RoadsterSport midpipe or similar which provides a location in the midpipe after the converter for easy relocation of the secondary o2 sensor. If you have a factory midpipe, then you would have to get a bung welded in your midpipe for relocation of the o2 sensor.
Extension cord uses thermal insulated wire and factory connectors and care should be take to make sure the connectors do not contact the hot header because while the wires are thermally protected the connectors can melt if left in contact with the header.
NOT CARB APPROVED, CANNOT SHIP TO RESIDENTS OF CALIFORNIA.
|,|||-||LOUISE123|,||,|LOUISE OLSON ACCOUNTING MANAGER Accounting@GoMiata.com|,||,||,||,||,||,||,||,||,||,||,|||-||LOOLAC|,||,|LOUISE OLSON
ACCOUNTING MANAGER
Accounting@GoMiata.com|,||,||,||,||,||,||,||,||,||,||,|Louise Olson: Accounting|-||-|||-||PRMAGU|,|SHIPPINGINFO|,|LOW PRICE GUARANTEE|,||,||,||,||,||,||,||,||,||,|
How does GoMiata Price-Match Guarantee work?
GoMiata.com values you as a customer and wants to ensure that you receive the best price available. If you find a lower price on a new identical item, and meet the terms and conditions below, GoMiata.com will match the price. Go Miata will not match marketplace vendors, third-party seller, auction sites or sites requiring memberships. Price match must be approved before purchase and is not valid for prior purchases. Please allow up to two full business days for price match approval.
Which items does GoMiata price match?
GoMiata currently offers price matching for all parts with the Price Match icons. The item must be identical, including model number, components and U.S. warranty. The item must be in stock and available for purchase at that price from a U.S. reseller, whose price and availability we reserve the right to verify.
How do GoMiata coupons and rebates contribute to the GoMiata price?
When calculating a price match, we’ll deduct any available GoMiata coupons, GoMiata Rebates (instant, easy or mail–in) and manufacturer rebates from the GoMiata price to arrive at a net price. For example, if you buy an item from us for $100 and we offer a $20 instant rebate, the net price is $80. If another company’s price is $80 or more, we will not match the price. Another example: if you buy an item from us for $159 and you have a $30 coupon, the net price is $129. If another company’s price is $125, your price match would be $4.
Will GoMiata match another company’s price when combined with an instant rebate, mail–in rebate, gift check or gift card, or free or discounted item?
We’ll match another company’s final price after deducting an instant rebate. If another company offers a product that comes with a mail–in rebate, gift check, gift card or an equivalent, we will only match the price you pay at the point of purchase and will not take the mail–in rebate, gift check, gift card or equivalent into account. If another company offers a product that comes with a free or discounted item and GoMiata does not carry the free or discounted item, we will only match the price you pay at the point of purchase and will not take the free or discounted item into account.
Are delivery charges included in the price match?
No. Due to difference in costs of shipping items with different carriers and to different geographic locations the cost of shipping cannot be matched.
Are quantities limited on price matched products?
We may limit the quantities of price–matched items, particularly if the other company does. In addition, we reserve the right to limit quantities sold to a customer.
Policy information is available by calling 1–840–218–1388, or visiting www.gomiata.com. This policy is subject to change without notice we also reserve the right to not match any prices from any competitors at any given time.
|,|||-||LURAINKIT|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Luggage Rack Install Kit|,|505-104|,|75.99|,|49.95|,||,||,|0.000 |,||,||,||,|Luggage Rack Install Kit
This item comes with our Go Miata Luggage Rack, but in case you lost your installation kit or need a new one. This kit is the right kit for you.
The Luggage Rack Install Kit come with:
1. 4 Pads
2. 4 Clips
3. 4 Screws
4. 1 Alan wrench
* Does not include Luggage Rack.
|,|"Select Year" "1990-2005" "2006-2016"|-||-|||-||MSCSACHVAKEY|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|M Script Satin Chrome Valet Key Fob|,|AGI-KCVM|,|19.99|,|16.95|,||,||,|0.000 |,||,||,||,|M Script Satin Chrome Valet Key Fob
KEY CHAINS: Striking in appearance and crafted from superior materials, these key chains are unique, durable and backed by a lifetime warranty against flaws in materials & workmanship. Packaged in an attractive gift box.
|,|||-||MAGNAFLOW|,|SHOP-BY-TOP-MIATA-BRANDS|,|Magnaflow|,||,||,||,||,||,||,||,||,||,||,|||-||MISTCASYPEEX|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|MagnaFlow Miata MazdaSpeed Turbo Stainless Cat-Back Exhaust 2004-2005|,|MAG-16639|,|1,001.01|,|706.00|,||,||,|10.000 |,||,||,||,|MagnaFlow Miata Stainless Cat-Back System PERFORMANCE EXHAUST 2004-2005
(Install Instructions)
* Material: 100% Stainless Steel
* Tubing O.D. Size: 2.5in.
* System Type: Cat-Back
* TIP O.D. Size: 4in.
* TIP Quantity: 1
* Single/Dual: Single
* Exit Position: Rear Exit
L4 1.8L Turbocharged Mazdaspeed
5 x 8 x 18 in. Muffler, 2.5 in. Tubing, Rear Exit, 4 in. Tip,
Features and Benefits:
* Lifetime Warranty
* Dyno Tested And Proven To Make Power
* Performance Gains In Horsepower And Torque
* Great Sound - Has A Smooth; Deep Tone
* Easy To Install, Mandrel-Bent
* All Welded. Built To Last
For Miata years 1999-2005
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MISTCASYPEEX2|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|MagnaFlow Miata Stainless Cat-Back Exhaust 1999-2005|,|MAG-16638|,|892.92|,|780.00|,||,||,|10.000 |,||,||,||,|MagnaFlow Miata Stainless Cat-Back System PERFORMANCE EXHAUST 1999-2005
(Dyno Chart)
(Install Instructions)
Material: 100% Stainless Steel
Tubing O.D. Size: 2.5in.
System Type: Cat-Back
TIP O.D. Size: 4in.
TIP Quantity: 1
Single/Dual: Single
Exit Position: Rear Exit
Features and Benefits:
* Lifetime Warranty
* Dyno Tested And Proven To Make Power
* Performance Gains In Horsepower And Torque
* Great Sound - Has A Smooth; Deep Tone
* Easy To Install, Mandrel-Bent
* All Welded. Built To Last
For Miata years 1999-2005
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MISTCASYPEEX1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|MagnaFlow Miata Stainless Cat-Back System PERFORMANCE EXHAUST 2006-2014|,|MF-16668|,|1,025.82|,|824.95|,||,||,|10.000 |,||,||,||,|MagnaFlow Miata Stainless Cat-Back System PERFORMANCE EXHAUST 2006-2014
(Dyno Chart)
(Install Instructions)
*Without Appearance Package
Material: 100% Stainless Steel
Tubing O.D. Size: 2.5in.
System Type: Cat-Back
TIP O.D. Size: 3.5in.
TIP Quantity: 2
Single/Dual: Dual
Exit Position: Rear Exit
Features and Benefits:
* Lifetime Warranty
* Dyno Tested And Proven To Make Power
* Performance Gains In Horsepower And Torque
* Great Sound - Has A Smooth; Deep Tone
* Easy To Install, Mandrel-Bent
* All Welded. Built To Last
For Miata years 2006-2014
|,|"Shipping Cost" "add(+$129)"|-||-|||-||MAUNCACO|,|19MAMIEXCACO|,|Magnaflow Universal Catalytic Converter 1990-1995|,|MAG-46005|,|264.99|,|139.00|,||,||,|5.000 |,||,||,||,|Magnaflow Universal Catalytic Converter
Replacement catalytic converters by MagnaFlow are purpose built to your specific emission requirements, and meet or exceed Mazda's original specs. MagnaFlow offers two options direct fit, for an easy bolt on install, or universal fit which will require welding to install.
|,|"Select Year" "Select Here" "1990-1993 48 State" "1994-1995 48 State add(+$125)" " " "1990-1993 CARB add(+$599)" "1994-1995 CARB add(+$599)"|-||-|||-||GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,||,|MAINTENANCE MAZDA OEM PARTS |,||,||,||,|GENUINE MAZDA MX-5 MIATA OEM PARTS AND MORE|,||,||,||,||,||,|
|,|||-||PARTS---PERFORMANCE-MAINTENANCE-PARTS|,||,|MAINTENANCE PARTS|,||,||,||,||,||,||,||,||,||,||,|||-||LOBADI|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|Manual Mazda Miata Taylor-Vertex 4 Post Battery Disconnect Switch |,|MC-BDIS|,|85.99|,|64.99|,||,||,|0.000 |,||,||,||,|We have finally located the best kill switch on the market. The Taylor-Vertex 4 post design that accomodates the battery shutoff as well as the alternator. Many kill switches on the market require a key that can get lost, rendering the kill switch useless. The other style is similair to this design, but the engagement of the switch mechanism is loose and sloppy. After repeated use on the Longacre product we found that they often needed to be replaced because of malfunctioning.
Comes with installation instructions and off stickers that meet the SCCA requirement for battery disconnects.
|,|||-||MABUAK|,|OWNERS-SHOWCASE|,|Mark Burgoyne
Juneau, AK|,|mabuak|,||,||,||,||,||,||,|afaf|,||,|My name is Mark Burgoyne and I'm from Juneau, Alaska. attached are pictures of my original 1994 mx5. I enjoy the summers driving through the mountain country of the Alaskan far north including the Yukon territory. All I have to watch out for is the occasional moose and/or grizzly bear! Please contact me for any information about traveling to Alaska.
Mark Burgoyne
Juneau, AK
|,|||-||MASTBOAWA|,|OWNERS-SHOWCASE|,|Mark Stellato
Oakham, WA|,|newitem152763034|,||,||,||,||,||,||,||,||,|Hi,and thanks for expediting my roll bar!! I installed it this past weekend with no problems.Thought I wuold send you a few pics and to say BRAVO for such excellent customer service.
Best regards,
Mark Stellato
|,|||-||BLLIPLFRWIMA|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda 3D Raised Letter Frames|,|LF-MAZ-CB|,|75.95|,|60.95|,||,||,|0.000 |,||,||,||,|These premium quality raised letter license plate frames are made in the USA by our nations leading manufacturer. Each solid brass coined license plate frame is Guaranteed Forever against rust and comes complete with hardware and hardware covers. The manufacturing process is completed all in one plant using only the highest grades of brass and chrome. The 3D raised letters are solid cast brass. Hand polishing further ensures that all these products will have a flawless appearance. Frames have rear tabs to secure bottom of license plate.
|,|||-||MA3DRALEFR|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda 3D Raised Letter Frames|,|LF-MAZ-GG|,|79.95|,|60.95|,||,||,|0.000 |,||,||,||,|These premium quality raised letter license plate frames are made in the USA by our nations leading manufacturer. Each solid brass coined license plate frame is Guaranteed Forever against rust and comes complete with hardware and hardware covers. The manufacturing process is completed all in one plant using only the highest grades of brass and chrome. The 3D raised letters are solid cast brass. Hand polishing further ensures that all these products will have a flawless appearance. Frames have rear tabs to secure bottom of license plate.
|,|||-||CHLIPLFRWIMA|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda 3D Raised Letter Frames|,|LF-MAZ-CC|,|74.95|,|60.95|,||,||,|0.000 |,||,||,||,|These premium quality raised letter license plate frames are made in the USA by our nations leading manufacturer. Each solid brass coined license plate frame is Guaranteed Forever against rust and comes complete with hardware and hardware covers. The manufacturing process is completed all in one plant using only the highest grades of brass and chrome. The 3D raised letters are solid cast brass. Hand polishing further ensures that all these products will have a flawless appearance. Frames have rear tabs to secure bottom of license plate.
|,|||-||MAGO3DRALEFR|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda 3D Raised Letter Frames|,|LF-MAZ-CG|,|74.95|,|60.95|,||,||,|0.000 |,||,||,||,|These premium quality raised letter license plate frames are made in the USA by our nations leading manufacturer. Each solid brass coined license plate frame is Guaranteed Forever against rust and comes complete with hardware and hardware covers. The manufacturing process is completed all in one plant using only the highest grades of brass and chrome. The 3D raised letters are solid cast brass. Hand polishing further ensures that all these products will have a flawless appearance. Frames have rear tabs to secure bottom of license plate.
|,|||-||3DRALEFR|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda 3D Raised Letter Frames|,|LF-MAZ-GC|,|79.95|,|60.95|,||,||,|0.000 |,||,||,||,|These premium quality raised letter license plate frames are made in the USA by our nations leading manufacturer. Each solid brass coined license plate frame is Guaranteed Forever against rust and comes complete with hardware and hardware covers. The manufacturing process is completed all in one plant using only the highest grades of brass and chrome. The 3D raised letters are solid cast brass. Hand polishing further ensures that all these products will have a flawless appearance. Frames have rear tabs to secure bottom of license plate.
|,|||-||MAKEBL|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Key Chain Black|,|KEY-KC1540MAZ|,|19.95|,|16.95|,||,||,|0.000 |,||,||,||,|Mazda Key Chain Black
Genuine black leather with hinged steel key holder.
Measures approximately 1" x 3-1/4".
|,|||-||MAKEYCHRED|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Key Chain Brown|,|KEY-KC1541MAZ|,|21.95|,|16.95|,||,||,|0.000 |,||,||,||,|Mazda Key Chain Brown
Genuine Brown leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||MALEANDBLMXL|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Leather and Black MX-5 Logo Key Chain|,|KEY-KCTL-MIA-BLK|,|19.95|,|12.95|,||,||,|0.000 |,||,||,||,|Genuine black leather with hinged steel key holder. Measures approximately 1.25” x 3.5".
|,|||-||RC-SL0039|,|19MAMISUANDS|,|Mazda Mazda Miata MX-5 Rocar 90-97 Front Stabilizer Link DS+PS|,|RC-SL0039|,|75.95|,|54.02|,||,||,||,||,||,||,|Mazda Miata 90-97 Front/Rear Stabilizer Link Driver side + Passenger side fits: Front or Rear, RC-SL0039
- Make:MAZDA
- Model:Miata MX-5
- Year:1990-1997
|,|||-||MAZDA-MAZDASPEED-MIATA-STAINLESS-STEEL-WIRE-MESH-GRILLE-2004|,|NBGRILLANDBRA|,|Mazda Mazdaspeed Miata Stainless Steel Wire Mesh Grille Mazdaspeed 2004+|,|CC-P1167M|,|129.99|,|104.95|,||,||,|0.000 |,||,||,||,|Mazda Mazdaspeed Miata Stainless Steel Wire Mesh Grille 2004+
Enhance your Miata's good looks and keep out unwanted debris with a Wire Mesh Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Mesh Grilles are made of stainless steel. The black ones additionally have a durable powdercoated - not painted - finish. Installation is easy. This should have been a factory part; no Miata should be without one.
Choose from bright stainless steel or black powdercoated stainless steel.
Requires removing tow hooks and easily installs under factory bolts.
NOTE: Only Used for Mazdaspeed Miata's. Will not fit Non-Mazdaspeed Miatas.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||61-0080COMBO|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata RoadsterSport MAX POWER MX5 COMPLETE EXHAUST COMBO 2006-2015 |,|61-0080COMBO|,|2,617.00|,|2,348.00|,||,||,||,||,||,||,|Mazda Miata RoadsterSport MAX POWER MX5 COMPLETE EXHAUST COMBO 2006-2015
As the leader in ALL STAINLESS Miata exhausts we are proud to present our:
COMPLETE Plug and Play MX5 Miata Exhaust Combo!
Includes: Made In America All Stainless Steel Lifetime Warranty!
Includes:
*Roadstersport Max Power Header
*RoadsterSport Midpipe
*RoadsterSport Super-Q exhaust
*Both Plug and Play O2 Extension cables- needed to relocate both factory O2 sensors to the Midpipe.
Simple Bolt on for MANUAL TRANSMISSION ONLY, can be installed on Automatic but see page four of our forum header install thread for details of what is required.
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links (sample video bottom of this page!), just short summaries below. Entire system saves 25 pounds over stock and adds torque from low rpms to redline that you can feel.
RoadsterSport Max Power Header! Gorgeous all T304 polished stainless steel max flow MX5 Miata header. Lifetime warranty. We have included a number of features into our MX5 Miata header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
We also put incredible effort into making the exit at the collector as smooth and perfect as we can get it because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible. Note we use the factory collector gasket....so our fit is as factory-like as possible. Note that we have no O2 sensor connection in our header....in part to keep flow as clean as we can get it, but also because we could see no purpose in locating them in the header since doing so will throw a code because pulling the factory header includes removal of the first catalytic converter (code is avoided by using our included extension cables shown in the picture to locate sensors to before and after our midpipe converter).
RoadsterSport Stainless Steel Midpipe. All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is slightly larger diameter than stock at 2.5 inches all the way through. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved). Uses monster 18 inch resonator because when you uncork this NC MX5 Miata motor it wants to get loud unless you use a resonator this large (by comparison stock resonator is about a foot long). Stock midpipe is 20 pounds, our midpipe is 16.5 pounds for total savings of 3.5 pounds. Despite very large resonator, this midpipe will raise the final sound level just sightly because of the higher flow larger diameter tubing. Our midpipe is designed to take both O2 sensors...and includes two O2 sensor connections...one before the midpipe's converter and one after the midpipe's converter to help avoid a code by simulating the factory installation before.
CARB NOTICE: Installing a header in the NC generation Miata means removing the first catalytic converter which means there can NEVER be a street legal header for this vehicle. Thus, the header is legal for offroad race use only, and can NEVER be CARB approved.
RoadsterSport "Super-Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust. Our Best! We make Five different Miata exhaust choices for the 2006 and newer MX5 Miata, including the RoadsterSport RACE, RoadsterSport STREET Single, the RoadsterSport II Duals, the RoadsterSport Q, and this premium duals unit we affectionately call the RoadsterSport Super-Q. This attenuation chamber design unit is the most mild and mellow on an otherwise stock Miata...about 10 to 15% louder than stock...with a deep burble. This unit was designed for both improved flow performance AND the best sound absorbing ability possible. This premium MX5 muffler is the BEST choice for those who plan such additional mods as a supercharger or header change (which unleashes a massive amount of additional sound). This attenuation design is also a premium "NO-DRONE" choice for those with the AUTOMATIC transmission which tends to keep the RPMS in the lower ranges. By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....ALL THE FLOW, without the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.
INSTALL NOTES
Read full installation hints and notes in our forum Installation Instruction Section! The secret is LUBE your hangers well with dishsoap so you can get flanges aligned properly, and torque the supplied hardware to NO MORE THAN 25-30 ft/lbs (using more torque will actually result in LESS seal because you will pucker the flange out at the middle).
DYNO from our own Project 2006. Red line is best STOCK result. Blue line is best result with this RoadsterSport Max Power Header, RoadsterSport Midpipe and RoadsterSport exhaust...plus our MotoEast tune to raise the redline (intake is still STOCK). Notice lots MORE power from idle to Redline, lots more TORQUE from idle to redline, making the car much faster and more fun to drive!
|,|"Shipping cost" "add($+169)"|-||-|||-||PEES-11-500|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA MIATA MX-5 OEM Flywheel 2016+|,|pees-11-500|,|444.64|,|349.02|,||,||,||,||,||,||,|MAZDA MIATA MX-5 OEM Flywheel 2016+
Manufacturer: Genuine Mazda Original Parts
NOTE: Picture shown is for illustration purpose only. Actual product may vary.
|,|||-||903-596|,|NABOOTS|,|Mazda Miata VIEW LARGER LED Sun Visor Light Kit by Jass Performance - Black 1990-1997|,|903-596|,|125.99|,|104.98|,||,||,||,||,||,||,|Mazda Miata VIEW LARGER LED Sun Visor Light Kit by Jass Performance - Black 1990-1997
Sun Visor Interior Lights from Jass Performance tackle two issues in our Miatas - removal of the "always in your line of sight" sun visor and addition of much needed interior light! This kit features a super-bright LED bulb right in the center of a CNC machined aluminum block off plate that is anodized black. Having over-head lights make nighttime in your Miata much more enjoyable.
Kit comes as a pair for both sun visors and instructions are included.
|,|||-||TRDOGRATDRBR|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata - Brake Fluid Bleeder Kit |,|TDR-BRK-BLDR|,|29.99|,|22.05|,||,||,|0.000 |,||,||,||,|MX-5 Miata Brake Fluid Bleeder Kit
Mazda Miata brake fluid bleeder kit uses a one-way check valve so that you can bleed your brake fluid on your own. Requires a good old Coke bottle to complete the kit.
|,|||-||LED-15-4|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata 15 Color LED Strip Tube Underglow Underbody System Neon Light Kit with Remote Control|,|led-15-4|,|189.05|,|165.05|,||,||,||,||,||,||,|Mazda Miata 15 Color LED Strip Tube Underglow Underbody System Neon Light Kit with Remote Control
Product Description:
Decorative your car by this RGB LED Strip Light, changing the atmosphere with different color and lighting mode. Enjoy a beautiful, exotic and romantic atmosphere tonight.
Product Features:
SOUND ACTIVE: The LED under car glow system is equipped with sound sensors that lets the LED lights synchronized with music beat. The LED music light strip follows the beat and adjusts flashing to fit the strength of the sound.
MUSIC DECORATION: The Kit designed to be simple, yet also provides elegance inside the car when driving at night or enjoying music. And because it has sound sensor, the under car glow system synchronizes with music beat.
PREMIUM QUALITY: It can be bent, fold, wound and fixed in place easily, perfect for under wheel arches, around the front grille, under foot-wells, in the trunk, along the dash, etc.
MULTI COLORS: The LED under car glow system produces multi colors which are Blue, Green, Purple, Red, Teal, White, and Yellow. The under car glow system has also fifteen (15) color flashing modes, perfect for synchronizing with the beat of music.
BRIGHT COLOR: The LED under car glow system lights up colorful colors to give a stylishly stunning look to the areas you may want to put them on. Even though they're really bright, they're great power savers so you don't have to worry energy consumption.
* Remote control and control box is included!!!
* 2 x 36 inches (90cm) waterproof LED tubes
* 2 x 24 inches (60cm) waterproof LED tubes
* Wireless RF Control Box Module
* Wire Remote Control
How to Use:
Installation Steps: 1. Clean the dust before installing. 2. Jack up the car. 3. Heat the screwdriver and use it to get holes for band. 4. The tie band through the hole and tie it up. 5. Tie up the strip. 6. Connect to positive (red wire) + negative (black wire). 7. Test result. Installation completed.
|,|||-||MAMI19|,||,|Mazda Miata 1990-1993|,||,||,||,||,||,||,||,||,||,||,|||-||MAMI191|,||,|Mazda Miata 1994-1995|,||,||,||,||,||,||,||,||,||,||,|||-||MAMI192|,||,|Mazda Miata 1996-1997|,||,||,||,||,||,||,||,||,||,||,|||-||MAMI193|,||,|Mazda Miata 1999-2000|,||,||,||,||,||,||,||,||,||,||,|||-||MI2BIGBRKIT1|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata 2-Wheel Big Brake Kit 1990-1993 REAR ONLY|,|60-109156-R16|,|699.99|,|599.00|,||,||,|10.000 |,||,||,||,|Mazda Miata 2-Wheel Big Brake Kit 1990-1993 REAR ONLY
REAR only of our best version 4 Miata Big Brake Kit. Includes our famous 10.75 version 4 TWO-PIECE rotors, heavy duty stainless steel lines, brake pads, mounting brackets, everything you need to complete installation of the rear big brake kit.
Our Version 4 Miata Big Brake Kit goes another step beyond our lesser kits and uses four DBA5000 rotors with Alumalite center hats made from light weight aircraft grade aluminum connected to directional slotted rotors with NAS bolts and lock nuts (notice more connection points than the lesser kits and higher grade hardware, higher grade rotors, higher grade hats). The bottom line is that these rotors usually last our track users three or four times longer than the rotors in our version 1 and 2 kits, and nearly double the life of even the version 3 kit rotors (thus, the greater entry cost is paid back several times in rotor replacement savings with many of our track customers reporting YEARS of track use on one set of these rotors.). These custom rotors also feature DBA's Thermal Stability Profiling (TSP). A bonus feature is Thermo-Graphic paint markings that indicate the peak temperature range you reached on track (which helps you fine tune your pad selection).
Also, DBA's AlumaLite hats provide the greatest resistance to distortion for uniform disc expansion and added thermal protection for your bearings.
Application Notes: You get what you pay for...and EVERYTHING in our version 4 kit is much more stout than in our discount Wilwood kits. The hats are far superior with 10 connection points to the rotor using NAS fasteners (compared with 6 connections to the rotor in our Wilwood discount kits). The brackets are several times stronger, the rotors are MUCH higher density DBA5000 rotors that will last several times longer than the Wilwood rotors, the rotors include thermographic side markings like those used in Formula One so that you can track your peak temps and better select pads, the rotors cool MUCH more effectively thanks to the patented design features discussed above. Finally, the lines are custom made for a direct fit and don't need the numerous adapter fittings used by the Wilwood kit.
|,|"Shipping Cost" "add(+$39)"|-||-|||-||MAZDA-MIATA-2-WHEEL-BIG-BRAKE-KIT-1990-2005-REAR-ONLY|,|19MAMIBRROBR1|,|Mazda Miata 2-Wheel Big Brake Kit 1990-2005 - REAR ONLY|,|60-109156-R18|,|699.99|,|599.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2-Wheel Big Brake Kit 1990-2005 - REAR ONLY
REAR only of our best version 4 Miata Big Brake Kit. Includes our famous 10.75 version 4 TWO-PIECE rotors, heavy duty stainless steel lines, brake pads, mounting brackets, everything you need to complete installation of the rear big brake kit.
Our Version 4 Miata Big Brake Kit goes another step beyond our lesser kits and uses four DBA5000 rotors with Alumalite center hats made from light weight aircraft grade aluminum connected to directional slotted rotors with NAS bolts and lock nuts (notice more connection points than the lesser kits and higher grade hardware, higher grade rotors, higher grade hats). The bottom line is that these rotors usually last our track users three or four times longer than the rotors in our version 1 and 2 kits, and nearly double the life of even the version 3 kit rotors (thus, the greater entry cost is paid back several times in rotor replacement savings with many of our track customers reporting YEARS of track use on one set of these rotors.). These custom rotors also feature DBA's Thermal Stability Profiling (TSP). A bonus feature is Thermo-Graphic paint markings that indicate the peak temperature range you reached on track (which helps you fine tune your pad selection).
Also, DBA's AlumaLite hats provide the greatest resistance to distortion for uniform disc expansion and added thermal protection for your bearings.
Application Notes: You get what you pay for...and EVERYTHING in our version 4 kit is much more stout than in our discount Wilwood kits. The hats are far superior with 10 connection points to the rotor using NAS fasteners (compared with 6 connections to the rotor in our Wilwood discount kits). The brackets are several times stronger, the rotors are MUCH higher density DBA5000 rotors that will last several times longer than the Wilwood rotors, the rotors include thermographic side markings like those used in Formula One so that you can track your peak temps and better select pads, the rotors cool MUCH more effectively thanks to the patented design features discussed above. Finally, the lines are custom made for a direct fit and don't need the numerous adapter fittings used by the Wilwood kit (skipping adapters means less chance for brake fluid leaks!).
|,|"Shipping Cost" "add(+$39)"|-||-|||-||MAMI20|,||,|Mazda Miata 2001-2005|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MIATA-2D-OEM-STYLE-CARBON-FIBER-TRUNK-1999-2005|,|NBACCESSORIES|,|Mazda Miata 2D Oem Style Carbon Fiber Trunk 1999-2005|,|99MZMX52DOE-020C|,|1,115.00|,|959.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2D Oem Style Carbon Fiber Trunk 1999-2005
1999-2005 Mazda Miata 2D Oem Style Carbon Fiber Trunk. VIS Carbon Fiber Hoods and Trunks are made from the finest carbon fiber material available. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer utilizes a 100% ISO certified, Grade A carbon fiber material. The carbon fiber material is bonded to the hood using a high grade epoxy resin , and then finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating to ensure a high gloss finish. Marrying aesthetics and functions, we pioneered the use of one-piece, smooth underside shell which complements the fine finish on top, and at the same time strengthens the product’s structural integrity. The edges of each hood or trunk are meticulously smoothed by hands to insure high-quality finish all around. The result is a carbon product that is unparalleled and excels above all else in quality, durability, and aesthetics. All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|,|"Freight Cost" "add(+$279.00)"|-||-|||-||MAZDA-MIATA-2DR-BALLISTIX-FRONT-BUMPER-1999-2003|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Ballistix Front Bumper 1999-2003|,|99MZMX52DBX-001|,|399.00|,|298.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Ballistix Front Bumper 1999-2003
1999-2003 Mazda Miata 2dr Ballistix Front Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
This only fits 99-00 and 01-03 will need modifications around the headlights.
|,|"Freight Cost" "add(+$269)"|-||-|||-||MAZDA-MIATA-2DR-BALLISTIX-SIDE-SKIRTS-1999-2003|,|NBACCESSORIES|,|Mazda Miata 2Dr Ballistix Side Skirts 1999-2003|,|99MZMX52DBX-004|,|369.00|,|298.00|,||,||,|0.000 |,||,||,||,| Mazda Miata 2Dr Ballistix Side Skirts 1999-2003
1999-2003 Mazda Miata 2dr Ballistix Side Skirts. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$169)"|-||-|||-||MAZDA-MIATA-2DR-FACTORY-STYLE-SPOILER-1999-2003|,|NBACCESSORIES|,|Mazda Miata 2Dr Factory Style Spoiler 1999-2003|,|591375|,|259.00|,|239.00|,||,||,|0.000 |,||,||,||,| Mazda Miata 2Dr Factory Style Spoiler 1999-2003
1999-2003 Mazda Miata 2Dr Factory Style Spoiler. Manufactured by Wings West, a pioneer in polyurethane bodykit manufacturing and design. Parts with part numbers that begin with the prefix 89 are made out of durable, flexible polyurethane. While parts with part numbers that begin with the prefix 59 or 49 are made out of multi-layer fiberglass. Wings West parts are made in USA. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description.
Intended fro OFF ROAD use only.
|,|"EMS Freight Cost" "add(+$79.00)"|-||-|||-||1990-1997-MAZDA-MIATA-2DR-INVADER-CARBON-FIBER-HOOD|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Invader Carbon Fiber Hood 1990-1997 |,|90MZMX52DVS-010C|,|1,595.00|,|1,245.55|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Invader Carbon Fiber Hood 1990-1997
1990-1997 Mazda Miata 2Dr Invader Carbon Fiber Hood. VIS Carbon Fiber Hoods and Trunks are made from the finest carbon fiber material available. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer utilizes a 100% ISO certified, Grade A carbon fiber material. The carbon fiber material is bonded to the hood using a high grade epoxy resin , and then finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating to ensure a high gloss finish. Marrying aesthetics and functions, we pioneered the use of one-piece, smooth underside shell which complements the fine finish on top, and at the same time strengthens the product’s structural integrity. The edges of each hood or trunk are meticulously smoothed by hands to insure high-quality finish all around. The result is a carbon product that is unparalleled and excels above all else in quality, durability, and aesthetics. All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|,|"Freight Cost" "add(+$349)"|-||-|||-||1990-1998-MAZDA-MIATA-2DR-INVADER-FRONT-BUMPER|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Invader Front Bumper 1990-1997 |,|Ed-100961|,|355.00|,|265.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Invader Front Bumper 1990-1997
1990-1997 Mazda Miata 2dr Invader Front Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$269)"|-||-|||-||1990-1998-MAZDA-MIATA-2DR-INVADER-REAR-LIP|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Invader Rear Lip 1990-1997 |,|90MZMX52DINV-012|,|215.00|,|185.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Invader Rear Lip 1990-1997
1990-1997 Mazda Miata 2dr Invader Rear Lip. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$149.00)"|-||-|||-||MAZDA-MIATA-2DR-INVADER-SPOILER-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Invader Spoiler 1990-1997|,|90MZMX52DINV-003|,|575.00|,|392.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Invader Spoiler 1990-1997
1990-1997 Mazda Miata 2dr Invader Spoiler. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$159)"|-||-|||-||MAZDA-MIATA-2DR-MAGNUM-EYE-LIDS-1999-2003|,|NBACCESSORIES|,|Mazda Miata 2Dr Magnum Eye Lids 1999-2003|,|99MZMX52DMAG-081|,|335.00|,|259.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Magnum Eye Lids 1999-2003
1999-2003 Mazda Miata 2dr Magnum Eye Lids. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$89.00)"|-||-|||-||1990-1998-MAZDA-MIATA-2DR-MAGNUM-FRONT-BUMPER|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Magnum Front Bumper 1990-1997 |,|90MZMX52DMAG-001|,|485.00|,|314.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Magnum Front Bumper 1990-1997
1990-1997 Mazda Miata 2dr Magnum Front Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight and Handling Cost" "add(+$265)"|-||-|||-||MAZDA-MIATA-2DR-MAGNUM-FRONT-LIP-1999-2003|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Magnum Front Lip 1999-2003|,|99MZMX52DMAG-011|,|455.00|,|298.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Magnum Front Lip 1999-2003
1999-2003 Mazda Miata 2dr Magnum Front Lip. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
Box is Approximately: 72x24x22 and about 25lbs
|,|"Freight Cost" "add(+$269)"|-||-|||-||1990-1998-MAZDA-MIATA-2DR-MAGNUM-FULL-KIT|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Magnum Full Kit 1990-1997 |,|90MZMX52DMAG-099|,|1,009.00|,|792.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Magnum Full Kit 1990-1997
1990-1997 Mazda Miata 2dr Magnum Full Kit. Fiberglass Kit Includes : Front Bumper, Side Skirts, Rear Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass and come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$345)"|-||-|||-||MAZDA-MIATA-2DR-MAGNUM-FULL-KIT-1999-2003|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Magnum Full Kit 1999-2003|,|99MZMX52DMAG-099|,|1,059.00|,|798.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Magnum Full Kit 1999-2003
1999-2003 Mazda Miata 2dr Magnum Full Kit. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$365)"|-||-|||-||1990-1997-MAZDA-MIATA-2DR-MAGNUM-REAR-BUMPER|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Magnum Rear Bumper 1990-1997 |,|90MZMX52DMAG-002|,|359.00|,|298.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Magnum Rear Bumper 1990-1997
1990-1997 Mazda Miata 2dr Magnum Rear Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$205)"|-||-|||-||MAZDA-MIATA-2DR-MAGNUM-SIDE-SKIRTS-1999-2003|,|NBACCESSORIES|,|Mazda Miata 2Dr Magnum Side Skirts 1999-2003|,|99MZMX52DMAG-004|,|345.00|,|298.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Magnum Side Skirts 1999-2003
1999-2003 Mazda Miata 2dr Magnum Side Skirts. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$169)"|-||-|||-||1990-1998-MAZDA-MIATA-2DR-RACER-DESIGN-FRONT-BUMPER|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Racer Design Front Bumper 1990-1997 |,|90MZMX52DRD-001|,|581.00|,|415.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Racer Design Front Bumper 1990-1997
1990-1997 Mazda Miata 2dr Racer Design Front Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$265)"|-||-|||-||1990-1997-MAZDA-MIATA-2DR-RE-REAR-BUMPER|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Re Rear Bumper 1990-1997 |,|90MZMX52DRE-002|,|219.00|,|185.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Re Rear Bumper 1990-1997
1990-1997 Mazda Miata 2dr RE Rear Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$169.00)"|-||-|||-||MAZDA-MIATA-2DR-RE-SIDE-SKIRTS-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Re Side Skirts 1990-1997|,|90MZMX52DRE-004|,|215.00|,|195.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Re Side Skirts 1990-1997
1990-1998 Mazda Miata 2dr RE Side Skirts. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$139)"|-||-|||-||1990-1997-MAZDA-MIATA-2DR-V-SPEED-CARBON-FIBER-HOOD|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr V Speed Carbon Fiber Hood 1990-1997 |,|90MZMX52DVSP-010C|,|1,799.00|,|1,360.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr V Speed Carbon Fiber Hood 1990-1997
1990-1997 Mazda Miata 2Dr V Speed Carbon Fiber Hood. VIS Carbon Fiber Hoods and Trunks are made from the finest carbon fiber material available. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer utilizes a 100% ISO certified, Grade A carbon fiber material. The carbon fiber material is bonded to the hood using a high grade epoxy resin , and then finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating to ensure a high gloss finish. Marrying aesthetics and functions, we pioneered the use of one-piece, smooth underside shell which complements the fine finish on top, and at the same time strengthens the product’s structural integrity. The edges of each hood or trunk are meticulously smoothed by hands to insure high-quality finish all around. The result is a carbon product that is unparalleled and excels above all else in quality, durability, and aesthetics. All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|,|"Freight Cost" "add(+$349)"|-||-|||-||1990-1998-MAZDA-MIATA-2DR-WAVE-FRONT-BUMPER|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Wave Front Bumper 1990-1997 |,|90MZMX52DWAV-001|,|499.00|,|424.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Wave Front Bumper 1990-1997
1990-1997 Mazda Miata 2dr Wave Front Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$265)"|-||-|||-||1990-1998-MAZDA-MIATA-2DR-WAVE-FULL-KIT|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Wave Full Kit 1990-1997 |,|90MZMX52DWAV-099|,|989.00|,|792.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Wave Full Kit 1990-1997
1990-1997 Mazda Miata 2dr Wave Full Kit. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$345)"|-||-|||-||1990-1997-MAZDA-MIATA-2DR-WAVE-REAR-BUMPER|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Wave Rear Bumper 1990-1997 |,|90MZMX52DWAV-002|,|599.00|,|398.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Wave Rear Bumper 1990-1997
1990-1997 Mazda Miata 2dr Wave Rear Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$159)"|-||-|||-||MAZDA-MIATA-2DR-WAVE-SIDE-SKIRTS-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Wave Side Skirts 1990-1997|,|90MZMX52DWAV-004|,|399.00|,|325.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Wave Side Skirts 1990-1997
1990-1998 Mazda Miata 2dr Wave Side Skirts. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$159.00)"|-||-|||-||MAZDA-MIATA-2DR-WIZDOM-FRONT-BUMPER-1999-2003|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Wizdom Front Bumper 1999-2005|,|99MZMX52DWIZ-001|,|345.00|,|298.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Wizdom Front Bumper 1999-2003
1999-2003 Mazda Miata 2dr Wizdom Front Bumper. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
**Note: bumper is designed for 01-05 models, 98-05 models will require modification to headlight areas for proper fitment**
|,|"Freight Cost" "add(+$269)"|-||-|||-||MAZDA-MIATA-2DR-WIZDOM-FULL-KIT-1999-2003|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Wizdom Full Kit 1999-2003|,|99MZMX52DWIZ-099|,|1,059.00|,|798.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Wizdom Full Kit 1999-2003
1999-2003 Mazda Miata 2dr Wizdom Full Kit. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$365)"|-||-|||-||MAZDA-MIATA-2DR-WIZDOM-SIDE-SKIRTS-1999-2003|,|NBACCESSORIES|,|Mazda Miata 2Dr Wizdom Side Skirts 1999-2003|,|99MZMX52DWIZ-004|,|355.00|,|298.00|,||,||,|0.000 |,||,||,||,| Mazda Miata 2Dr Wizdom Side Skirts 1999-2003
1999-2003 Mazda Miata 2dr Wizdom Side Skirts. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$149)"|-||-|||-||MAZDA-MIATA-2DR-WIZDOM-SPOILER-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata 2Dr Wizdom Spoiler 1990-1997|,|90MZMX52DWIZ-003|,|595.00|,|414.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2Dr Wizdom Spoiler 1990-1997
1990-1997 Mazda Miata 2dr Wizdom Spoiler. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$159)"|-||-|||-||CM-TS3-ND|,||,|Mazda Miata 3 Pieces Trunk Spoiler 2015+|,|CM-TS3-ND|,|255.90|,|219.95|,||,||,||,||,||,||,|Mazda Miata 3 Pieces Trunk Spoiler 2015+
We finally offer a new design of trunk spoiler for the ND!
This trunk spoiler has been designed following the round and sexy lines of the MX-5 trunk and gives the back of your car a sporty and racing touch.
Specifications (for the carbon fiber version:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
– High grade 3M double side adhesive supplied with each spoiler
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
This item is considered as bulky by the express companies so it can take more time to be delivered to you.
*Availability: 6-8 weeks production time
|,|"Select Option" "Carbon Fiber add(+$119)" "Carbon Kevlar add(+$159)" "Fiberglass"|-||-|"Shipping Cost" "add(+$79)"|-||-|||-||MI3SHTOBRBYC|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata 3-Point Shock Tower Brace by Cobalt (1990-2005)|,|CBT-904-651|,|249.99|,|219.98|,||,||,|0.000 |,||,||,||,|Mazda Miata 3-Point Shock Tower Brace by Cobalt (1990-2005)
Don't bother looking for a Strut Brace that compares with this one. Oval section stainless steel tubing is mated to beautifully crafted tower supports.
The welds on this brace are a work of art! Aside from the best craftsmanship available, this brace actually works. Patterned after Le Mans style chassis bracing, this piece mounts in three places including a special bracket that secures it to the firewall.
This ensures rigidity that cannot be duplicated by lesser quality braces that simply mount from shock tower to shock tower. Comes complete with instructions and all necessary hardware. Two Year 100,000 mile warranty. Fits all NA, Turbo & JR M45 Supercharged Miatas!
2001-2005 Jackson Racing M45 supercharged Miatas need the installation kit to re-route the air filter inlet for installation. (Does not fit on LHD-ABS cars). It only fits 1990-2005 Manual Trans, no ABS, no cruise control.
All other years do not need the install kit.
|,|"Please Select" "No Install Kit" "Install Kit add(+$109.95)"|-||-|||-||326POWER-70MM-LUG-NUTS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Mazda Miata 326 Power 60mm Lug Nuts|,|326power-60mm-80mm-lug-nuts|,|310.95|,|294.99|,||,||,||,||,||,||,|Mazda Miata 326 Power 60mm Lug Nuts
• Comes in set of 16 or 20 lug nuts
• Easy installation
• Available in 8 different colors
• Optional end-caps available
*Price is for 16 lug nuts (4 lugs = 4 lugs x 4 wheels), so the 5 lugs option is for 20 lug nuts (5 lugs = 5 lugs x 4 wheels)*
|,|"Select Size" "Select Here" "60mm" "80mm add(+$35)"|-||-|"Application" "Select Here" "Mazda (M12x1.5) (4 lugs)" "Mazda (M12x1.5) (5 lugs) add(+$75.00)" "Other (M12x1.25) (4 lugs)" "Other (M12x1.25) (5 lugs) add(+$75.00)"|-||-|"Select Color" "Select Here" "Black" "Blue" "Bronze" "Gold" "Green" "Gunmetal" "Orange" "Pink" "Purple" "Red" "Silver"|-||-|"Options" "Select Here" "Crown End Caps add(+$35)" "Drill Spike 35mm (M) - 4 lugs add(+$80.00)" "Drill Spike 35mm (M) - 5 lugs add(+$90.00)" "Drill Spike 50mm (L) - 4 lugs add(+$90.00)" "Drill Spike 50mm (L) - 5 lugs add(+$100.00)"|-||-|||-||326POWER-50MM-LUG-NUTS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Mazda Miata 326 Power 80mm or 90mm Lug Nuts|,|326power-80mm-lug-nuts|,|399.90|,|339.00|,||,||,||,||,||,||,|Mazda Miata 326 Power 80mm or 90mm Lug Nuts
• Comes in set of 16 or 20 lug nuts
• Easy installation
• Available in 8 different colors
• Optional end-caps available
*Price is for 16 lug nuts (4 lugs = 4 lugs x 4 wheels), so the 5 lugs option is for 20 lug nuts (5 lugs = 5 lugs x 4 wheels)*
|,|"Select Length" "Select Here" "80mm" "90mm"|-||-|"Application" "Select Here" "Mazda (M12x1.5) (4 lugs)" "Mazda (M12x1.5) (5 lugs) add(+$95.00)" "Other (M12x1.25) (4 lugs)" "Other (M12x1.25) (5 lugs) add(+$95.00)"|-||-|"Select Color" "Select Here" "Black" "Blue" "Bronze" "Gold" "Green" "Gunmetal" "Orange" "Pink" "Purple" "Red" "Silver"|-||-|"Options" "Select Here" "Crown End Caps add(+$35)" "Drill Spike 35mm (M) - 4 lugs add(+$80.00)" "Drill Spike 35mm (M) - 5 lugs add(+$90.00)" "Drill Spike 50mm (L) - 4 lugs add(+$90.00)" "Drill Spike 50mm (L) - 5 lugs add(+$100.00)"|-||-|||-||MAMI5ZBOSPNA|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata 5Zigen Border304 Speed NA Full Cat-back Exhaust 1990-1997 |,|T5Z-B304MA01|,|750.00|,|649.00|,||,||,|10.000 |,||,||,||,|
Race Spec exhaust system with Funnel type tail-end.
Tuning pre-finished by race engineers. Straightest possible pipe layout for ultimate response time.
*MAIN PIPE ALSTAR
*SILENCER / TAILEND Straight type / SUS304
*MATERIAL ALSTAR (PEARL GREY) CAPACITY OF 700 CELCIUS
*FEATURES Peak power performance for small vehicles.
**Special order item from Japan, delivery time 2~3 months after ordering**
|,|"Shipping Cost from Japan" "add (+$169)"|-||-|||-||MAMI5ZBOSPNA1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata 5Zigen Border304 Speed NB Exhaust 1999-2005|,|T5Z-B304MA03|,|750.00|,|614.00|,||,||,|10.000 |,||,||,||,|
Race Spec exhaust system with Funnel type tail-end.
Tuning pre-finished by race engineers. Straightest possible pipe layout for ultimate response time.
*MAIN PIPE ALSTAR
*SILENCER / TAILEND Straight type / SUS304
*MATERIAL ALSTAR (PEARL GREY) CAPACITY OF 700 CELCIUS
*FEATURES Peak power performance for small vehicles.
**Special order item from Japan, delivery time 2~3 months after ordering**
|,|"Shipping Cost from Japan" "add (+$169)"|-||-|||-||MAMI5ZMIFINA|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata 5Zigen Miracle Fireball NA Full Cat-back Exhaust 1990-1997 |,|T5Z-MA03-03R|,|1,100.00|,|903.00|,||,||,|10.000 |,||,||,||,|
5Zigen's ultimate racing spec muffler system now available for street use.
Well formed full stainless steel body. The Miracle Fireball minimizes pipe bendature and made from 1.00mm SUS304 stainless steel piping. Stainless piping hook and inner carbon ring gasket. 5ZIGEN's attention to detail to each specification and confidence in technology brings to the end-users the racing spec. for the street. Durability, power, sound, and performance is the next step in tuning as the Miracle Fireball hits the street.
Approximately 50% less weight as compared to the OE systems.
A) Use of substantial heat resistance full stainless steel. 1.00mm pipe thickness is racing circuit quality. Attractive appearance and specification to gain confidence on the race scene.
B) To accomodate the needed performance attention to the slightest is absolutely necessary. For instance, by using a stainless pipe mount on the body allows for greater assurance. Also, eaach pipe is combined with precision to ensure stable exhaust flow.
C) High level sound and performance is tuned in the main silencer. This original and exclusive piping layout allows for the maximum flow of exhaust.
D) To allow for flexibility, the 2 type system is used during the production stages. This allows for the combination of two piping rather than the conventional heavy duty flange. A carbon ring gasket is then reinforced to cease leakage.
E) Approximately 50% lightweight than the OEM exhaust system. At a stance to pay attention to detail even without the use of the flange. Use of 3.2mm stainless steel on the press compared with the conventional 10mm thickness
**Special order item from Japan, delivery time 2~3 months after ordering**
|,|"Shipping Cost from Japan" "add (+$179)"|-||-|||-||MAMI5ZPRANAE|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata 5Zigen ProRacer A-Spec Full Cat-Back NA Exhaust 1990-1997|,|T5Z-PRMA-003|,|900.00|,|749.00|,||,||,|10.000 |,||,||,||,|
A professionally aspired system inspired from the racing circuit.
5ZIGEN is at a breakthrough point where we can take informative feedback from professional users and have the ability to research and develop high quality products to the end users. All stainless steel body with INCONEL used for the tailend. Inconel is a nickel base material use also used in the top race category Formula One. This is extremely heat resistant, more than titanium, which is why it is used not only in Formula One, but in aeronautics as well. No limitation with the PRORACER A-SPEC system.
*Highly heat resistant INCONEL 600 chosen for the tailend.
*High-tech combination of SUS304 and Inconel 600 is available only through 5ZIGEN.
*1.2mm SUS409 used for the main chamber. SUS304 used for the silencer.
**Special order item from Japan, delivery time 2~3 months after ordering**
|,|"Shipping Cost from Japan" "add (+$169)"|-||-|||-||MAMI5ZPRANCE|,|20MAMIEXREPA|,|Mazda Miata 5Zigen ProRacer A-Spec Full Cat-Back NC Exhaust 2006-2015|,|T5Z-PRMA-010|,|1,200.00|,|1,015.00|,||,||,|10.000 |,||,||,||,|
Mazda Miata 5Zigen ProRacer A-Spec Full Cat-Back NC Exhaust 2006-2015
A professionally aspired system inspired from the racing circuit.
5ZIGEN is at a breakthrough point where we can take informative feedback from professional users and have the ability to research and develop high quality products to the end users. All stainless steel body with INCONEL used for the tailend. Inconel is a nickel base material use also used in the top race category Formula One. This is extremely heat resistant, more than titanium, which is why it is used not only in Formula One, but in aeronautics as well. No limitation with the PRORACER A-SPEC system.
*Highly heat resistant INCONEL 600 chosen for the tailend.
*High-tech combination of SUS304 and Inconel 600 is available only through 5ZIGEN.
*1.2mm SUS409 used for the main chamber. SUS304 used for the silencer.
**Special order item from Japan, delivery time 4-6 weeks after ordering**
|,|"Shipping Cost from Japan" "add (+$169)"|-||-|||-||MAMI5ZPRANAE1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata 5Zigen ProRacer A-Spec NB Exhaust 1999-2005|,|T5Z-PRMA-004|,|800.00|,|676.00|,||,||,|10.000 |,||,||,||,|
A professionally aspired system inspired from the racing circuit.
5ZIGEN is at a breakthrough point where we can take informative feedback from professional users and have the ability to research and develop high quality products to the end users. All stainless steel body with INCONEL used for the tailend. Inconel is a nickel base material use also used in the top race category Formula One. This is extremely heat resistant, more than titanium, which is why it is used not only in Formula One, but in aeronautics as well. No limitation with the PRORACER A-SPEC system.
*Rear Section Only, Mid Pipe Not included, Japanese Version has Catalytic Converter Incorporated in the Mid pipe
*Highly heat resistant INCONEL 600 chosen for the tailend.
*High-tech combination of SUS304 and Inconel 600 is available only through 5ZIGEN.
*1.2mm SUS409 used for the main chamber. SUS304 used for the silencer.
**Special order item from Japan, delivery time 2~3 months after ordering**
|,|"Shipping Cost from Japan" "add (+$195)"|-||-|||-||TE5ZUSAPRORA|,|19MAMIEXSYMU|,|Mazda Miata 5Zigen ProRacer NA 1.6 Header 1990-1993|,|T5Z-BMAEX01-P|,|600.00|,|524.00|,||,||,|0.000 |,||,||,||,|
5ZIGEN total tuning concept with our exhaust system.
For the ultimate gain in performance and smooth operation. Carries out the stresses of the exhaust airflow through the valves. Carefully crafted to fit each engine room. This competition exhaust manifold developed from 5ZIGEN's data acquired from competition racing and continued testing.
Utilization of full performance capability with the sports muffler series. 5ZIGEN's race experience of over 20 years brings total performance and total tuning a reality. With the will of reaching perfection, the capabilities of the engine and high response rates are available.
4-2-1 Straight Layout
Our history brings realistic data for oveall tuning and performance upgrades.Each layout configured for proper airflow to each engine room.
Quality and Craftsmanship
Chrome plated flange craftsmanship allows for maximum heat resistance. Each item is badged with our logo to ensure authenticity and quality control.
Stainless Steel
Stainless steel SUS304 used throughout for lightweight as well as heat resistance.
SPECS
*Piping: SUS304 Buffed
*Type: TIG Welding
*Features: 4-2-1 Type, improves response time and power gain.
*Made in Japan
|,|"Shipping Cost from Japan" "add (+$169)"|-||-|||-||5ZPRZZEX19MA|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata 5Zigen ProRacer ZZ Full Cat-Back NA Exhaust 1990-1997 |,|T5Z-PZMA-003|,|780.00|,|659.00|,||,||,|10.000 |,||,||,||,|
Each exhaust designed to fit each vehicle type.
By improving exhaust pipe layout, we have emphasized the most power outcome and also JASMA clearance for street legality in Japan. Under 94dB
Main Pipe: SUS436（1.2mm）All Stainless
Tailend: SUS304 with rear main Silencer already matched per vehicle
Features
*Layout designed to increase mid-range torque
*Exhaust tone tuned by race engineers
*JASMA certified
|,|"Shipping Cost from Japan" "add (+$169)"|-||-|||-||5ZPRZZEX19MA1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata 5Zigen ProRacer ZZ NB Exhaust 1999-2005|,|T5Z-PZMA-004|,|630.00|,|564.00|,||,||,|10.000 |,||,||,||,|
Each exhaust designed to fit each vehicle type.
By improving exhaust pipe layout, we have emphasized the most power outcome and also JASMA clearance for street legality in Japan. Under 94dB
Main Pipe: SUS436（1.2mm）All Stainless
Tailend: SUS304 with rear main Silencer already matched per vehicle
Features
*Layout designed to increase mid-range torque
*Exhaust tone tuned by race engineers
*JASMA certified
|,|"Shipping Cost from Japan" "add (+$169)"|-||-|||-||RC-SL0174|,|19MAMISUANDS6|,|Mazda Miata 99-05 NB Front Stabilizer Links DS+PS|,|RC-SL0174|,|65.95|,|50.04|,||,||,||,||,||,||,|Mazda Miata 99-05 NB Front Stabilizer Link Mazda Miata 99-05 NB Front Stabilizer Link
Mazda Miata 99-05 NB Front Stabilizer Link PS+DS 2pcs
- Make:MAZDA
- Model:Miata MX-5
- Year:1999-2005
|,|||-||MAZDAACBELTS|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata A/C Belt without Power Steering 1990-2005|,|923-520|,|42.42|,|32.95|,||,||,|0.000 |,||,|cewf|,||,|1990-2005 Mazda AC Belt without Power Steering
|,|||-||MIACDR19|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata AC Drier 1990-1993|,|MAC-904-810|,|99.99|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata AC Drier 1990-1993
Item number 1 from the picture
|,|||-||MIACDR192|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata AC Drier 1994-1997|,|MAC-904-946|,|99.99|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata AC Drier 1994-1997
Item number 1 from the picture
|,|||-||MIACHALEGRVI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata ACME Hampton Leather Grain Vinyl 1990-1996 Top Rail Only Set of Two |,|ACM-DPMT-HPT6508|,|299.99|,|238.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ACME Hampton Leather Grain Vinyl 1990-1996 Top Rail
Only Set of Two
Note: These Top Rails will fit with all factory panels. Remove existing door panels from car. Unscrew old top rails from panel and screw on new Top Rails.
For Miata years: 1990, 1991, 1992, 1993, 1994, 1995, and 1996.
NOTE: This will NOT fit 1997 Mazda Miata.
|,|"Select Color" "HPT - 6508 Ebony Vinyl All one color" "5197 Camel (Matches OEM Tan) All one color"|-||-|||-||3000202-|,|19MAMIDRVIAL|,|Mazda Miata ACT Performance Street Disc 1990-1993|,|ACT-3000202|,|167.00|,|129.02|,||,||,||,||,||,||,|Mazda Miata ACT Performance Street Disc 1990-1993
Description:
3000202 is a performance street disc and the most popular disc purchased. It features premium organic materials with high copper content for better heat transfer. Performance street discs allow for quicker shifting and smooth engagement. These discs feature a reduced marcel for faster shift action to complement ACT pressure plates. ACT spring-centered assemblies use bushings and cone springs similar to factory clutch discs. This creates frictional dampening, which improves clutch life and reduces noise. Quiet operation with increased strength and reliability.
Specifications:
Item Description Perf Street Sprung Disc
Product Weight (lbs.) 2.2
Disc Material Organic
Diameter (Inches) 7.9
Diameter (Millimeters) 200
|,|||-||600255-|,|MIREPA|,|Mazda Miata ACT XACT Flywheel Prolite 1990-2005|,|ACT-600255|,|509.00|,|395.02|,||,||,||,||,||,||,|Mazda Miata ACT XACT Flywheel Prolite 1990-2005
600255 is a Prolite flywheel, which is ACT's lighter flywheel offering with lowest inertia. Prolite flywheels are designed for best throttle response and acceleration. Prolite flywheels are preferred for road racing or rally racing, and have reduced drivability. Materials are properly distributed for maximum strength, good heat tolerance and rigidity. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Part Number:600255
Description:XACT Flywheel Prolite
SFI:1.1
Flywheel Tooth Count:112
Product Weight (lbs.):9.4
Warranty (Product Warranty):One (1) Year from Retail Purchase
|,|||-||600290|,|MIREPA|,|Mazda Miata ACT XACT Flywheel Streetlite 1990-2005|,|600290|,|434.00|,|335.00|,||,||,||,||,||,||,|Mazda Miata ACT XACT Flywheel Streetlite 1990-2005
600290 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT's Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can be resurfaced with no need to purchase additional parts.
Part Number:600290
Description:XACT Flywheel Streetlite
SFI:1.1
Flywheel Tooth Count:112
Product Weight (lbs.):13.9
Warranty (Product Warranty):One (1) Year from Retail Purchase
|,|||-||ADDRLI|,|19MAMISUANDS8|,|Mazda Miata Adjustable Drop Links|,|MC-DROP|,|229.99|,|194.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Adjustable drop links 1990-2005.
Made from Aluminum and anadized in red. This kit is complete with 4 adjustable drop links.
We supply the kit with clevis pins and cauder pins for the upper portion (or nuts and bolts if you prefer) of the drop link that attaches to the sway bar instead of nuts and bolts, so that you can make changes to the sway bar during qualifying without needing to unbolt the drop links. It also makes setup nice and easy because you don't need wrenches, simply remove the cauder pin, change the setting, and replace. The front drop links get spacers so that there is zero bind in the drop link in any of the 3 (1.6) settings. These work with both new (single shear) and old (double shear) style lower control arms.
You should have no bind in the sway bar links at all when installed. Other drop links on the market are too long, only right hand thread rod ends, and no spacers, so they have bind when the sway bar is in the full stiff position.
These work with the new 99 shock hats on the early cars.
Drop links come with the following pieces fully assembled:
* Spacers (2)
* Left (4) and Right (4) hand thread heim rod ends.
* Clevis pins (6)
* Cauder Pins (4)
* 3/8 Bolts and Nylock Nuts (4)
* Threaded (left and right) hex aluminum anadized body (4)
If you have a non-adjustabel sway bar, or wish to have nuts and bolts instead of the clevis and cotter pins, please select from the drop down. You must choose one or the other, as both sets of hardware WILL NOT be shipped.
|,|Select "Upper Bolts and Nuts" "Clevis an Cotter Pins (Upper)"|-||-|||-||AWR-5305KT|,|19MAMISUANDS6|,|Mazda Miata Adjustable Sway Bar End Links - Miata 1990-2005|,|AWR-5305KT|,|210.00|,|198.05|,||,||,||,||,||,||,|Mazda Miata Adjustable Sway Bar End Links - Miata 1990-2005
Product Description
Adjustable Sway Bar End Links. Front and Rear kit
Purchased as a full set for the 1990 - 2005 Mazda Miata Front and Rear.
Nickel plated Steel body. Remove those factory weak links and install these to add that last little bit of suspension detail to your ride. Sold as a pair. These units may be a little noisy for every day use, BUT FANTASTIC FOR ROAD RACE AND AUTO CROSSING.
|,|||-||MAZDA-MIATA-ADJUSTABLE-SWAY-BAR-END-LINKS-MIATA-1990-2005-MX-5-2006-2008-FRONT|,|19MAMISUANDS8|,|Mazda Miata Adjustable Sway Bar End Links 1990-2005 & 2006-2008 Front|,|AWR-5305FR|,|119.99|,|104.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Adjustable Sway Bar End Links 1990-2005 & 2006-2008 Front
Product Description
Adjustable Sway Bar End Links.
* Fits 1990 - 2005 Mazda Miata Front and Rear.
* Fits 2006-2009 MX-5 Front ONLY
Aluminum body. Remove those factory weak links and install these to add that last little bit of suspension detail to your ride. Sold as a pair. These units may be a little noisy for every day use, BUT FANTASTIC FOR ROAD RACE AND AUTO CROSSING.
Weight: 4.00 Lbs
|,|||-||MAMIADWIACGT|,|APRPERFORMANCE|,|Mazda Miata Adjustable Wing Accessories - GTC-200 2.5” Riser|,|AA-100227|,|99.99|,|84.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Adjustable Wing Accessories - GTC-200 2.5” Riser
|,|||-||GEMAMICOAIRI|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata AEM DRYFLOW AIR FILTER Intake Replacement Filters|,|GO-21-202D-HK|,|75.95|,|69.98|,||,||,|0.000 |,||,||,||,|Mazda Miata AEM DRYFLOW AIR FILTER Intake Replacement Filters.
AEM Dryflow Air Filters are washable synthetic air filters designed for an optimum combination of air flow, filtration, and performance. AEM Dryflow filters use an innovative high performance oil-free filtration material that allows easy cleaning, durable service, and excellent filtration.
-Designed to increase horsepower and throttle response
-AEM Air Filters are cleanable and reusable for the life of your vehicle
-Captures up to 99% of harmful contaminants
-Outstanding performance even in dusty racing conditions
-Manufactured in the USA
-Does not require oil
|,|||-||AEM22-482|,|19MAMIENPEVI|,|Mazda Miata AEM SHORT RAM INTAKE 2000-2003|,|aem22-482|,|478.09|,|428.02|,||,||,||,||,||,||,|Mazda Miata AEM SHORT RAM INTAKE 2000-2003
AEM 22-482R Product Specifications:
Replacement Filter 21-202DK
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
Couplers Included None
Product Style AEM Short Ram Intake System
Air Filter Height 5.25 in (133 mm)
Intake Pipe Material Aluminum
CARB EO Number D-670-15
Street Legal In All US States Yes
TUV Approved (Europe) No
Weight 5.4 lb (2.5 kg)
Air Filter Large End Diameter 6 in (152 mm)
Product Box Height 8.5 in (216 mm)
Product Box Length 18.25 in (464 mm)
Product Box Width 14.5 in (368 mm)
The AEM 22-482 Performance Short Ram Air Intake System has been engineered to be an affordable and easy way to boost the horsepower and torque of your engine.
The restrictive factory air filter and air intake housing are replaced with this AEM air intake system which was designed, tuned and dyno-tested to fit specific Mazda Miata models.
Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration, and performance. The sound your engine makes when accelerating is also modified to a fuller, more aggressive resonance allowing you to hear and feel the horsepower upgrade.
The intake tubing is constructed from mandrel-bent aluminum featuring a durable red powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass airflow sensor, inlet air temperature sensor, ventilation hose and purge solenoid valve.
Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal.
AEM Applications for 22-482 AEM Short Ram Intake System:
2000-2003 Mazda Miata 1.8L L4 F/I.
|,|"Select Color" "Select Here" "Polished" "Blue" "Red add($50)"|-||-|||-||MAZDA-MIATA-AIR-INTAKE-SYSTEM-BY-COBALT-1999-2005|,|19MAMIENPEVI|,|Mazda Miata Air Intake System by Cobalt 1999-2005|,|CBT-909-605|,|384.02|,|319.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Air Intake System by Cobalt 1999-2005
Clean up the front of your engine, add a nice growl sound on acceleration, and a little more power too with this Air Intake System by Cobalt. Designed with a shield to keep intake air cool and protected from hot ambient engine temperatures, also features a reusable K&N brand filter. The arm is rotomolded and textured black plastic, and the heat shield is black painted steel. Includes all installation hardware and instructions. Not CARB approved and cannot ship to an address in the state of California.
NOTE: Will not work with Mazdaspeed Miata's.
|,|||-||GENUINE-MAZDA-MIATA-ALTERNATOR-BELT|,|19MAMIMAVEAL|,|Mazda Miata Alternator Belt 1990-1993|,|B6S7-18-381B-9U|,|30.76|,|26.02|,||,||,|0.000 |,||,||,||,|Genuine Mazda Miata OEM Alternator Belt 1990-1993
Genuine Mazda Miata Alternator Belt. Your belts need to be checked every 15000 miles. Hate to be on a trip or going to work and have this break.
|,|"Year" "Select Here" "1990" "1991" "1992" "1993"|-||-|||-||MAMIALGRSETS|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Aluminium Grill Set "Speed"|,|RS-NC1070640G|,|79.99|,|59.95|,||,||,|0.000 |,||,||,||,|Only fits the NC10706400 Miata.
3 pieces Aluminium Grill set black anodised, only to use with NC10706400. Comes ready to install.
|,|||-||ALSH|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata Aluminum Shifter|,|MC-AS|,|79.99|,|58.45|,||,||,|0.000 |,||,||,||,|Spec Miata Aluminum Shifter
Lightweight replacement aluminum shift handle for your Miata. This is a direct bolt on shifter! No annoying rubber gromets, or set screws. This shifter threads right onto the shifter stalk just like the factory one.
Just about the same size as the stock plastic knob, this shifter looks great in the car and weighs significantly less.
Available in Blue, Red, Dark Grey, Natural Aluminum and Black anodize.
Dimensions 2 3/4" Tall x 1 1/4" Wide.
Aluminum
Blue
Black
Grey
Red
|,|"Select Color" "Natural Aluminum" "Black" "Red"|-||-|||-||MAZDA-MIATA-WINDOW-HANDLE-CRANK-1990-1997|,||,|Mazda Miata Aluminum Window Handle (Crank) 1990-1997|,|AL-WC1-NA|,|299.99|,|241.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Aluminum Window Handle (Crank) 1990-1997
These lightweight aluminum window cranks replace the plastic ones on all Mazda Miata 1990-1997. They give an awesome vintage look to your interior.
Specifications:
- Machined Billet Aluminum
- Polished finish
- 70 grams/piece
- Perfect fit on original spline
This is the first of a long list of aluminum products we started to work on. Door cups/door pulls/door latches will be available very soon along with a whole range of aluminum products exclusively for Mazda Miata.
|,|||-||MAMIAOGAVARO|,||,|Mazda Miata Aoshima Garage Vary Roadster Model 1/24 Scale|,|RS-NVP1100010|,|49.99|,|39.55|,||,||,|0.000 |,||,||,||,|Mazda Miata Aoshima Garage Vary Roadster Model 1/24 Scale
Standard curbside (no engine detail) kit of the ever-popular NB8C Mazda Roadster, as customized by "Garage Vary." Body is molded in red, with interior molded in black. Wheels are painted white. Includes rear wing and decals for the custom markings seen on the box art. Wheels turn and steer after assembly.
|,|||-||MAZDA-MIATA-APR-GTC-200-WING-SIDE-PLATES|,||,|Mazda Miata APR GTC-200 Wing Side Plates|,|AA-100050|,|99.99|,|84.95|,||,||,|0.000 |,||,||,||,|Mazda Miata APR GTC-200 Wing Side Plates
APR Performance is a company that produces a wide variety of performance products for today’s cars. The company has been manufacturing and designing aftermarket performance parts since 1999. Their products are tested so they can prove their strength and performance on the race track. Throughout the years, APR Performance has been designing and manufacturing durable and lightweight products that look good and improve performance.
APR Performance is dedicated to producing high quality parts so they use a variety of well-made materials. For example, their adjustable wings include one of two types of airfoils made from either carbon fiber or lightweight aluminum. The side plates are made of carbon fiber, to keep the adjustable wings light, but durable. The billet aluminum base stands are made from 6061-grade aluminum. The stainless steel bolts will not rust or oxidize. The wings are polished to a superior finish. Every component that APR Performance designs and manufactures is done with the same high quality materials and to the same high standards as the adjustable wings.
Along with individual parts, APR Performance offers complete aerodynamic kits for a variety of different cars like Corvettes and Mustangs. These aerodynamic kits include several body kit pieces made from carbon fiber. They include air dams and splitters, side rocker extensions, rear diffusers, rear deck spoilers, side mirrors, hood vents, as well as front fenders, rear fenders, and quarter panel vents. The company also creates wide body aerodynamic kits with other features like fuel doors and side skirts. The kits are dependent on the type of car make and model. Regardless of the products you choose for your car, you can trust that APR Performance crafts every piece to fit the specifications of each car make, model, and year.
|,|||-||MAZDA-MIATA-ARP-WHEEL-STUDS-REAR-ONLY-1994-2005|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Mazda Miata ARP REAR Wheel Studs 1994-2005|,|arp100-7720|,|48.21|,|38.05|,||,||,||,||,||,||,|Mazda Miata ARP REAR Wheel Studs 1994-2005
NOTE:
* Fits Mazda Miata Year 1994-2005 - REAR
Length: 7 inches
Width: 5 inches
Height: 0.875 inches
Weight: 0.64 lbs
|,|||-||MAZDA-MIATA-ARP-WHEEL-STUDS-1990-2005|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Mazda Miata ARP Wheel Studs 1990-2005|,|TUN-100-7719|,|48.21|,|38.05|,||,||,||,||,||,||,|Mazda Miata ARP Wheel Studs 1990-2005
NOTE:
* Fits Mazda Miata Years 1990-1993 - Front / Rear
* Fits Mazda Miata Years 1994-2005 - Fits FRONT ONLY
For Years 1994-2005 REAR see Additional Accessories on the Right of this Page.
Length: 7 inches
Width: 5 inches
Height: 0.75 inches
Weight: 0.6 lbs
|,|||-||AUTOWEAR-SEAT-COVERS|,|SHOP-BY-SALE|,|Mazda Miata Autowear Seat Covers 2006-2016 - SALE |,|autowear-seat-covers|,|525.95|,|459.99|,||,||,||,||,||,||,|Mazda Miata Autowear Seat Covers 2006-2016+
Top quality seat covers made by Autowear for the 2006 to 2015 NC Miata MX-5 to refresh the interior of the vehicle while giving it more class compared to the OEM style. Design using CAD and processed by machine so that uniformity is guaranteed between seats. At resale, car can be put back to stock and seats will look brand new.
• Set includes both front seats
• Available in multi-tone or all solid color
• Keeps the use of side airbag (if any)
• Double stitching that is easy to clean
• Very easy to clean and keeps dust off
• PRICE IS FOR 2 SEATS
• Made-to-order : Production lead time ~3-4 weeks
|,|"Select Year" "Select Here" "NC1 (2006-2008)" "NC2 (2009-2012)" "NC3 (2013-2015)" "ND (2016+)"|-||-|"Select Color" "Select Here" "ALL BEIGE (Real Leather & Perforated Center) add(+$200.00)" "ALL BEIGE (Synthetic Leather & Perforated Center) add(+$50.00)" "ALL BEIGE (Synthetic Leather)" "ALL BLACK (Real Leather & Perforated Center) add(+$200.00)" "ALL BLACK (Synthetic Leather & Perforated Center) add(+$50.00)" "ALL BLACK (Synthetic Leather)" "ALL GRAY (Synthetic Leather & Perforated Center) add(+$50.00)" "ALL GRAY (Synthetic Leather)" "ALL RED (Synthetic Leather & Perforated Center) add(+$50.00)" "ALL RED (Synthetic Leather)" "ALL WHITE (Synthetic Leather)" "BLACK x BLUE inner part (Synthetic Leather & Perforated Center) add(+$50.00)" "BLACK x RED inner part (Synthetic Leather & Perforated Center) add(+$50.00)"|-||-|"Custom Stitching Color" "Select Here" "Yes add(+$30.00)" "No"|-||-|||-||MAMI5ZMIFINA1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Axle-Back Exhaust Muffler 1999-2005|,|T-304|,|800.00|,|599.00|,||,||,|10.000 |,||,||,||,|Mazda Miata Axle-Back Exhaust Muffler 1999-2005
Axle-back exhaust systems feature Straight Double Core technology to unleash hidden horsepower. Eliminate air restriction to achieve better air flow in result of more Horse Power, more Torque and better fuel economic.
Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine
Features:
Made of High Quality T-304 Stainless Steel with Computerized
Mandrel-Bends for Strength and Durability
i.e. Maximizing Smoothest High Exhaust Air Flow Rate
High Performance Racing Spec. Design
Instantly Increases Horsepower/ Low End Torque
TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion
Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow
Muffler Exhaust Tips: 4" Round
Drum Cylinder for great tone
Piping Inlet Size: 2.5" OD
Removable baffle
Sound Level: Aggressive (Louder than our other Miata exhaust)
WHAT'S IN PACKAGE:
1 X Catback Exhaust System
Hardware: Metal Flange Gasket, 2 mounting bolts, washers and nuts.
|,|"Shipping Cost from Japan" "add (+$149)"|-||-|||-||MIBCRACO19|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Mazda Miata BC Racing Coilovers 1990-1997|,|GG-N-04|,|1,569.99|,|1,374.95|,||,||,|5.000 |,||,||,||,|Mazda Miata BC Racing Coilovers 1990-1997
Detailed Description:
For 1990-1997 Mazda Miata
Front Upper Pillow Ball Mount - Included
Rear Upper Pillow Ball Mount - Included
Front Adjustable Camber - no
Rear Adjustable Camber - no
Front Spring Rates - 550
Rear Spring Rates - 440
30 Levels of Adjustable Damping Force
Fully Height Adjustable
Mono-Tube Design For Maximum Performance
One Year Limited Warranty
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MIATA-BILLET-HEEL-GUARD-|,|NBINVIALL|,|Mazda Miata Billet Heel Guard 1990-2015|,|CBT-906-236|,|79.99|,|64.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Billet Heel Guard 1990-2015
Add the finishing touch to your pedal area with this highly functional and great looking heel pad. This billet heel pad will keep you from wearing a hole in your mats and provides good footing for shifting.
Pair it up with a pedal kit for a complete overhaul.
|,|||-||MAZDA-MIATA-BILSTEIN-B6-HEAVY-DUTY-FRONT-MONOTUBE-GAS-PRESSURE-SHOCKS-AND-STRUTS-1990-1997|,|19MAMISUANDS3|,|Mazda Miata Bilstein B6 Heavy Duty Front Monotube Gas Pressure Shocks and Struts 1990-1997|,|24-014885|,|179.00|,|123.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Bilstein B6 Heavy Duty Front Monotube Gas Pressure Shocks and Struts 1990-1997
Bilstein B6 Heavy Duty monotube gas pressure shocks and struts are the ideal choice for your Mazda Miata. These shocks provide improved handling and stability, without sacrificing ride comfort. They offer super damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride. (yellow paint, steel body)
For Mazda Miata Year 1990-1997:
1990 Mazda Miata Base L4 1.6L Front
1991 Mazda Miata Base L4 1.6L Front
1991 Mazda Miata SE L4 1.6L Front
1992 Mazda Miata Base L4 1.6L Front
1993 Mazda Miata Base L4 1.6L Front
1993 Mazda Miata LE L4 1.6L Front
1994 Mazda Miata Base L4 1.8L Front
1994 Mazda Miata M Edition L4 1.8L Front
1995 Mazda Miata Base L4 1.8L Front
1995 Mazda Miata M Edition L4 1.8L Front
1996 Mazda Miata Base L4 1.8L Front
1996 Mazda Miata M Edition L4 1.8L Front
1997 Mazda Miata Base L4 1.8L Front
1997 Mazda Miata M Edition L4 1.8L Front
1997 Mazda Miata STO L4 1.8L Front
|,|||-||MAZDA-MIATA-BILSTEIN-B6-HEAVY-DUTY-FRONT-MONOTUBE-GAS-PRESSURE-SHOCKS-AND-STRUTS-1999-2005|,|19MAMISUANDS9|,|Mazda Miata Bilstein B6 Heavy Duty Front Monotube Gas Pressure Shocks and Struts 1999-2005|,|24-065580|,|179.00|,|139.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Bilstein B6 Heavy Duty Front Monotube Gas Pressure Shocks and Struts 1999-2005
Bilstein B6 Heavy Duty monotube gas pressure shocks and struts are the ideal choice for your Mazda Miata. These shocks provide improved handling and stability, without sacrificing ride comfort. They offer super damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride. (yellow paint, steel body)
Fits Mazda Miata Years 1999-2005:
1999 Mazda Miata 10th Anniversary L4 1.8L Front
1999 Mazda Miata Base L4 1.8L Front
2000 Mazda Miata Base L4 1.8L Front
2000 Mazda Miata LS L4 1.8L Front
2000 Mazda Miata SE L4 1.8L Front
2001 Mazda Miata Base L4 1.8L Front
2001 Mazda Miata LS L4 1.8L Front
2001 Mazda Miata SE L4 1.8L Front
2002 Mazda Miata Base L4 1.8L Front
2002 Mazda Miata LS L4 1.8L Front
2002 Mazda Miata SE L4 1.8L Front
2003 Mazda Miata Base L4 1.8L Front
2003 Mazda Miata LS L4 1.8L Front
2003 Mazda Miata SE L4 1.8L Front
2003 Mazda Miata Shinsen L4 1.8L Front
2004 Mazda Miata Base L4 1.8L Front
2004 Mazda Miata LS L4 1.8L Front
2004 Mazda Miata Mazdaspeed L4 1.8L Front
2005 Mazda Miata Base L4 1.8L Front
2005 Mazda Miata LS L4 1.8L Front
2005 Mazda Miata Mazdaspeed L4 1.8L Front
|,|||-||MAZDA-MIATA-BILSTEIN-B6-HEAVY-DUTY-REAR-MONOTUBE-GAS-PRESSURE-SHOCKS-AND-STRUTS-1990-1997|,|19MAMISUANDS3|,|Mazda Miata Bilstein B6 Heavy Duty Rear Monotube Gas Pressure Shocks and Struts 1990-1997|,|24-014892|,|169.60|,|139.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Bilstein B6 Heavy Duty Rear Monotube Gas Pressure Shocks and Struts 1990-1997
Bilstein B6 Heavy Duty monotube gas pressure shocks and struts are the ideal choice for your Mazda Miata. These shocks provide improved handling and stability, without sacrificing ride comfort. They offer super damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride. (yellow paint, steel body)
For Mazda Miata Years 1990-1997:
1990 Mazda Miata Base L4 1.6L Rear
1991 Mazda Miata Base L4 1.6L Rear
1991 Mazda Miata SE L4 1.6L Rear
1992 Mazda Miata Base L4 1.6L Rear
1993 Mazda Miata Base L4 1.6L Rear
1993 Mazda Miata LE L4 1.6L Rear
1994 Mazda Miata Base L4 1.8L Rear
1994 Mazda Miata M Edition L4 1.8L Rear
1995 Mazda Miata Base L4 1.8L Rear
1995 Mazda Miata M Edition L4 1.8L Rear
1996 Mazda Miata Base L4 1.8L Rear
1996 Mazda Miata M Edition L4 1.8L Rear
1997 Mazda Miata Base L4 1.8L Rear
1997 Mazda Miata M Edition L4 1.8L Rear
1997 Mazda Miata STO L4 1.8L Rear
|,|||-||MAZDA-MIATA-BILSTEIN-B6-HEAVY-DUTY-REAR-MONOTUBE-GAS-PRESSURE-SHOCKS-AND-STRUTS-1999-2005|,|19MAMISUANDS9|,|Mazda Miata Bilstein B6 Heavy Duty Rear Monotube Gas Pressure Shocks and Struts 1999-2005|,|24-065597|,|179.00|,|139.99|,||,||,|5.000 |,||,||,||,|Mazda Miata Bilstein B6 Heavy Duty Rear Monotube Gas Pressure Shocks and Struts 1999-2005
Bilstein B6 Heavy Duty monotube gas pressure shocks and struts are the ideal choice for your Mazda Miata. These shocks provide improved handling and stability, without sacrificing ride comfort. They offer super damping ability that makes them ideal for the driver who demands superior performance, while maintaining an exceptional street ride. (yellow paint, steel body)
Fit's Mazda Miata Years:
1999 Mazda Miata 10th Anniversary L4 1.8L Rear
1999 Mazda Miata Base L4 1.8L Rear
2000 Mazda Miata Base L4 1.8L Rear
2000 Mazda Miata LS L4 1.8L Rear
2000 Mazda Miata SE L4 1.8L Rear
2001 Mazda Miata Base L4 1.8L Rear
2001 Mazda Miata LS L4 1.8L Rear
2001 Mazda Miata SE L4 1.8L Rear
2002 Mazda Miata Base L4 1.8L Rear
2002 Mazda Miata LS L4 1.8L Rear
2002 Mazda Miata SE L4 1.8L Rear
2003 Mazda Miata Base L4 1.8L Rear
2003 Mazda Miata LS L4 1.8L Rear
2003 Mazda Miata SE L4 1.8L Rear
2003 Mazda Miata Shinsen L4 1.8L Rear
2004 Mazda Miata Base L4 1.8L Rear
2004 Mazda Miata LS L4 1.8L Rear
2004 Mazda Miata Mazdaspeed L4 1.8L Rear
2005 Mazda Miata Base L4 1.8L Rear
2005 Mazda Miata LS L4 1.8L Rear
2005 Mazda Miata Mazdaspeed L4 1.8L Rear
|,|||-||KG-WORKS-INSTRUMENT-PANEL-NA-WAVY-19901997|,|NADASHBOARD|,|Mazda Miata Black Brushed Gauge Cluster Bezel by Jass 1990-1997|,|910-328|,|95.99|,|79.99|,||,||,||,||,||,||,|Mazda Miata Black Brushed Gauge Cluster Bezel by Jass 1990-1997
Black brushed and engraved stainless steel instrument cluster surround for Mazda Miatas. These bezels match the new Black Brushed Stainless Steel interior styling upgrades from Jass. This set includes engraved stainless plates for the Tachometer and Speedometer dials, to bring the most out of your Miatas stock black classic gauge faces.
|,|"Select Year" "Select Here" "1990-1993 (910-328)" "1994-1997 (910-329)"|-||-|||-||STATUS-RACING-BLACK-CARBON-FIBER-SHIFT-KNOB|,|20MAMIINKN|,|Mazda Miata Black Carbon Fiber Shift Knob|,|SRSHIFT|,|75.00|,|55.00|,||,||,||,||,||,||,|Mazda Miata Black Carbon Fiber Shift Knob
Complete your interior and improve your driving experience with the new Status Racing Carbon Fiber Shift Knob. Made from CNC Machined aluminum this cylindrical shift knob fits your hand like a glove and features a sinister matte black finish, carbon fiber accents and the signature STATUS “S” logo. It also comes with optional pitch thread M8x1.25 M10x1.24 and M12x1.125 This allows for fitment across a large variety of vehicles. Whether your on the track or at the car show this Status Racing Shift Knob will the perfect addition to your interior.
Features:
- CNC Machined Aluminum
- Beautiful Matte Black Finish with Carbon Fiber Accent
- Signature STATUS “S” Logo
- Optional pitch threads M8x1.25 M10x1.25 M12x1.25
|,|||-||MAMIBOTSTSTC1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata Borla Stainless Steel Cat-Back Miata Exhaust 1990-1997|,|BORLA-14411|,|891.99|,|758.99|,||,||,|5.000 |,||,||,||,|
Mazda Miata Borla Stainless Steel Cat-Back Miata Exhaust 1990-1997
T-304 Stainless Steel Cat-Back™ System
BORLA Cat-Back™ exhausts feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium Aircraft-Quality T-304 Stainless Steel, an alloy superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit.
Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
Speacial Feature for this Borla Exhaust are:
* All Stainless Steel Construction throughout including flanges
* Performance - flows significantly better than stock 60%-65%.
* Industry Leading Craftsmanship
* Weight Savings - 5 Pounds lighter than OE muffler
* Superior fit and finish
* Easy installation for most Miata mechanics
* Template supplied for cutting exhaust outlet
* 7-15% increase in horsepower
* Better Fuel Economy
* Million Mile Borla Warranty
CLICK ON THE PHOTOS FOR A LARGER VIEW!
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MIATA-BURNOUT-REAR-BUMPER-SKIRTS-2006-2008|,|20MIMIEXPA|,|Mazda Miata Burnout Rear Bumper Skirts 2006-2008|,|mazda-miata-burnout-rear-bumper-skirts-2006-2008|,|510.35|,|399.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Burnout Rear Bumper Skirts 2006-2008
Product from JAPAN made by Burnout. Subtle and stylish touch to the exterior. Makes the bumper look more aggressive and lower.
• Classy look
• Flows really well with the lines of the car
• Stylish and durable
• Gives a more aggressive look to the NC
• Available in high quality FRP or Carbon Fiber
• Only available for NCEC-1 Miata (2006-2008)
|,|"Application" "NCEC-1 (06-08)"|-||-|"Finish" "Select Finish" "Carbon Fiber add(+$100)" "FRP"|-||-|||-||452992-|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata California emissions compliant Front Catalytic Converter by MagnaFlow 1999-2005|,|MAG-452992|,|915.00|,|850.00|,||,||,||,||,||,||,|Mazda Miata California emissions compliant Front Catalytic Converter by MagnaFlow 1999-2005
MagnaFlow direct-fit catalytic converters are designed for easy bolt-on installation for the professional installer. Each is designed to exact the original equipment specifications. While the majority of the direct-fit catalytic converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation. All California state catalytic converters are torca compliant. Converters in this catalog are based on executive orders issued by the California air resource board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.
|,|||-||NAB-7148-7146|,|NEW|,|Mazda Miata Cam Valve Cover & Engine Timing Cover Bolt Dress Up Kit 1990-2005|,|NAB-7148-7146|,|94.99|,|78.95|,||,||,||,||,||,||,|Mazda Miata Cam Valve Cover & Engine Timing Cover Bolt Dress Up Kit 1990-2005
Stainless Steel. Attractive Metric hex socket design complements the appearance of your engine compartment. Stronger than factory bolts that sometimes snap when removing. Resistant to corrosion. Seats perfectly into the recess for bolt in cam cover.
• 11 long bolts
• 2 short bolts
• 13 washers.
• 3 Short Bolts for Waterpump pulley
• 5 Long Bolts for Timing Covers
• 3 Medium Bolts for Timing Covers
|,|||-||GARAGE-STAR-VALVE-COVER-BOLT-KIT|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Cam Valve Cover Bolt Kit 1990-2005|,|NAB-7146|,|55.99|,|49.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Cam Valve Cover Bolt Kit 1990-2005
Hex Socket, Marine grade stainless steel cam cover bolt set.
Kit includes:
- 11 long bolts
- 2 short bolts
- 13 washers
Features
Stainless Steel. Attractive Metric hex socket design complements the appearance of your engine compartment. Stronger than factory bolts that sometimes snap when removing. Resistant to corrosion. Seats perfectly into the recess for bolt in cam cover.
|,|||-||POLCUSFITCAR|,|CLEARANCE|,|Mazda Miata Car Cover Covercraft Custom Fit BLOCK-IT 380*FREE SHIPPING*|,|808-101|,|192.60|,|158.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Car Cover Covercraft Custom Fit Block-It 380
Custom-Fit Block-It® 380 Car Covers are designed to offer great all-weather performance at a cost-effective price. The Block-It® 380 multi-layer fabric is perfect for light outdoor use, ding protection, rain, and much more. The unique design allows for this cover to be half the weight of other high-performance fabrics like our Noah® Car Covers.
The Block-It® 380 Series fabric is Kimberly-Clarks (KC) latest film barrier fabric that uses a 3-layer design of soft Bicomponent Spunbond on the top and bottom with a breathable film layer sandwiched in the middle. The outer layer naturally resists moisture, acid rain, pollutants, sap, and other debris perfect for moderate outdoor protection. An inner breathable film barrier has microscopic pores smaller than water droplets (and most dust particles), to keep moisture out while allowing moisture and heat to escape. Super soft bottom layer provides a gentle touch on your vehicles finish.
Covercraft Block-It® 380 Car Covers are going to be custom-fit to your exact car, truck, SUV, or van. Each cover will have built-in urethane elastic that is sewn into the front and rear hems for easy installation. At the bottom of the cover, there will be reinforced non-scratch grommets to protect your paint. Since 1965 Covercraft has been the leader in Vehicle Covers. If you don't see a custom pattern available or you modified your vehicle give us a call we can cover any vehicle with wheels!
|,|"Select Years" "Select Here" "1990-1997 w/o Spoiler" "1990-1997 with Spoiler add(+$20)" "1999-2005 add(+$20)" "2006-2015 with Softtop add(+$20)" "2006-2015 with Hardtop add(+$20)" "2016-2017 w/ Antenna Pocket add(+$30)" "2017-2021 RF 2dr w/ Antenna Pocket add(+$30)"|-||-|||-||CAR-MAKE-CORN-S-RETRO-MIRRORS|,|NAEXVIALL|,|Mazda Miata Car Make Corns Retro Mirrors V2 1990-2005|,|car-make-corn-s-retro-mirrors|,|325.05|,|249.95|,||,||,||,||,||,||,|Mazda Miata Car Make Corns Retro Mirrors V2 1990-2005
Product Description
Those are the new version (v2) of the square shaped retro mirrors made by Car Make Corn’s (CORN'S) for the NA (1989-1997) & NB (1998-2005) Miata. The new version has thicker (more durable and shiny) chrome finish as well as a laser engraved CORN'S logo. These are replacement for OEM mirrors and will sure help give your vehicle a more retro look. Blue lenses are installed so it can reduce glare from cars following you at night.
Please note that to keep the cost low, the CORN'S engraved logo was printed in the same direction for both mirrors. That means that once installed, one will have logo upside-down.
-2 mirrors included
-Includes gasket & hardware
-Awesome retro look
-Bolt-on!
-Only available for NA & NB (1989-2005) Miata
|,|"Select Year" "NA6CE (90-93)" "NA8C (94-97)" "NB8C-1 (99-00)"
"NB8C-2 (01-05)"|-||-|||-||CARBING-REAR-STRUT-TOWER-BAR|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Carbing Rear Strut Tower Bar 2016+|,|carbing-rear-strut-tower-bar|,|405.95|,|389.05|,||,||,||,||,||,||,|Mazda Miata Carbing Rear Strut Tower Bar 2016+
Rear strut bar made by Okuyama Carbing for the ND (2016+) Miata. This strut bar is constructed of highly polished aluminum that will not only look great, but also increase the handling capabilities of your Miata by reducing the potential for flex that occurs in the rear of the car.
-Oval “D” type strut bar
-Polished aluminum
-Please keep in mind that the trunk liner must be trimmed in order to install
-Quality part from Japan
-Only available for the ND (2016+) Miata
|,|||-||MAZDA-MIATA-2DR-MAGNUM-REAR-LIP-1999-2003|,|NBACCESSORIES|,|Mazda Miata Carbon Creations DriTech Skyline R32 Look Wing Spoiler 1990-2021|,|114401|,|855.00|,|725.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Creations DriTech Skyline R32 Look Wing Spoiler 1990-2021
With a dedication to innovation, and a passion for motorsports, Carbon Creations has been at the forefront for over a decade. From the world leader in performance aero comes the revolution of dry carbon fiber.
Our new DriTech carbon fiber products utilize manufacturing technology once reserved for the top aerospace clientele. DriTech provides maximum weight reduction and superior strength, sacrificing nothing. With class-leading attention to detail, and the industry's best warranty, there simply is no equal. Experience for yourself why Carbon Creations DriTech is demanded by motorsports professionals all over the world.
This is no ordinary dry carbon fiber. This is DriTech, and you can only get it from Carbon Creations.
-Revolutionary DriTech technology
-Aerospace and Motorsports proven manufacturing
-Up to 50% stronger and lighter than the competition
-Class leading 2x2 twill weave carbon fiber
-Premium UV inhibiting finish
-Modified Aerodynamics
|,|"Freight Cost" "add(+$129)"|-||-|||-||MAMITOCAFIRE|,|NEW|,|Mazda Miata Carbon Creations DriTech TKO Wing Spoiler 1990-1997|,|114348|,|749.00|,|655.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Creations DriTech TKO Wing Spoiler 1990-1997
With a dedication to innovation, and a passion for motorsports, Carbon Creations has been at the forefront for over a decade. From the world leader in performance aero comes the revolution of dry carbon fiber.
Our new DriTech carbon fiber products utilize manufacturing technology once reserved for the top aerospace clientele. DriTech provides maximum weight reduction and superior strength, sacrificing nothing. With class-leading attention to detail, and the industry's best warranty, there simply is no equal. Experience for yourself why Carbon Creations DriTech is demanded by motorsports professionals all over the world.
This is no ordinary dry carbon fiber. This is DriTech, and you can only get it from Carbon Creations.
Revolutionary DriTech technology
Aerospace and Motorsports proven manufacturing
Up to 50% stronger and lighter than the competition
Class leading 2x2 twill weave carbon fiber
Premium UV inhibiting finish
Modified Aerodynamics
1 year limited warranty
|,|||-||MAZDA-MIATA-CARBON-CREATIONS-OEM-HOOD-1-PIECE-1990-1997|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Mazda Miata Carbon Creations DriTech Venom Hood 1990-1997 - Sale! |,|114104|,|1,899.00|,|1,481.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Creations DriTech Venom Hood 1990-1997
1990-1997 Mazda Miata Carbon Creations OEM Hood - 1 Piece
Note: we recommend the use of hood pins with all hoods
Carbon Creations is one of the most sought after brands by motorsport professionals. All Carbon Creations aerodynamics are manufactured to the highest quality standard to ensure proper fitment and durability. Every part is made with Grade "A" carbon fiber and finished with a premium clear coat for UV protection. Carbon Creations parts are up to 70% lighter than OEM parts, increasing performance and style. Whether on the track or at the show, Carbon Creations has what you need.
* 100% Grade "A" Carbon Fiber
* High Gloss Finish
* UV Coating
* Maximum Strength & Durability
* Authenticity Badge
* General Instruction Guide
* Hardware Kit
* Up To 70% Lighter Than OEM Factory Parts
* 1 Year Limited Warranty
* High Quality Mesh Grille (where applicable)
|,|"Freight Cost" "add(+$349)"|-||-|||-||MAZDA-MIATA-CARBON-CREATIONS-OEM-HOOD-1-PIECE-1999-2005|,|NBACCESSORIES|,|Mazda Miata Carbon Creations OEM Hood - 1 Piece 1999-2005 - Sale! |,|106195|,|2,295.00|,|1,475.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Creations OEM Hood - 1 Piece 1999-2005
1999-2005 Mazda Miata Carbon Creations OEM Hood - 1 Piece
Note: we recommend the use of hood pins with all hoods
Carbon Creations is one of the most sought after brands by motorsport professionals. All Carbon Creations aerodynamics are manufactured to the highest quality standard to ensure proper fitment and durability. Every part is made with Grade "A" carbon fiber and finished with a premium clear coat for UV protection. Carbon Creations parts are up to 70% lighter than OEM parts, increasing performance and style. Whether on the track or at the show, Carbon Creations has what you need.
* 100% Grade "A" Carbon Fiber
* High Gloss Finish
* UV Coating
* Maximum Strength & Durability
* Authenticity Badge
* General Instruction Guide
* Hardware Kit
* Up To 70% Lighter Than OEM Factory Parts
* 1 Year Limited Warranty
* High Quality Mesh Grille (where applicable)
|,|"Freight Cost" "add(+$349)"|-||-|||-||MAMITODURESP|,|BLACKFRIDAYSALE|,|Mazda Miata Carbon Creations RBS Wing Spoiler 1999-2005|,|115548|,|779.00|,|597.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Creations RBS Wing Spoiler 1999-2005
-2x2 twill weave carbon fiber
-Premium gloss, UV protectant finish
-Track-proven strength and performance
-Up to 70% lighter than OEM factory parts
-Weather-resistant aluminum mesh grille (where applicable)
|,|||-||SLICK-AUTO-MAZDA-MIATA-CARBON-FIBER-HEADLIGHT-COVER-DRIVER-SIDE-1990-1997|,|NAEXLI|,|Mazda Miata Carbon Fiber "Driver Side" Vented Headlight Cover for 1990-1997|,|CMCF11|,|229.99|,|179.00|,||,||,|0.000 |,||,||,||,|Miata Miata Carbon Fiber "Driver Side" Vented Headlight Cover for 1990-1997
Availability: 7 - 14 days production time
This lightweight carbon fiber vented headlight cover brings 20% more air in your engine compartment and save some weight at the front of your car. Attention: This listing is for the driver side only!
Specifications:
- 3K Carbon Fiber 1x1 twill (Made in Japan)
- 240g+450g Carbon Fiber manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
* This is for Driver Side only *
|,|"Drop-ship fee" "add(+$15)"|-||-|||-||MAMICAFIADWI|,|NBBODYSTYLING|,|Mazda Miata Carbon Fiber Adjustable Wing by APR Performance |,|AS-105907|,|935.00|,|849.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Carbon Fiber Adjustable Wing by APR Performance
When properly mounted on the rear of your Miata, a wing can generate large amounts of downforce, increasing the amount of tire grip available on the road. This increased grip allows you to carry higher speeds through turns. This GTC-200 wing is composed of lightweight and durable carbon fiber composite. Supporting the carbon fiber wing are 10 mm “aircraft grade” 6061 billet aluminum pedestals that come in a flat black powdercoat finish, with turn-buckles to adjust the wing’s pitch. Spanning 59.5" wide with a height of 10", the GTC-200 adjustable wing offers the perfect amount of downforce for your Miata when you’re driving at high speeds.
This wing is engineered to better use all the air flowing over your Miata as you drive. The center section to outer section angle difference is 12 degrees, which means when the center section is set flat, the outer edges will be set to a 12 degree rake, and will generate downforce. It also means that you don’t have to install your wing ridiculously high above your roof line to be effective (“shopping cart style”).
For Mazda Miata Yaers: 1990-2005
|,|"Shipping Cost" "add(+$95)"|-||-|||-||NRG-CF-GT-WING-69|,|20MIMIEXPA|,|Mazda Miata Carbon Fiber Adjustable Wing by NRG|,|NRG-CARB-A690|,|799.99|,|629.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Fiber Adjustable Wing by NRG
One of the simplest modification on the exterior of a vehicle, which gives it a completely different sports look is the rear trunk spoilers/ wings. Not only spoilers mean for great appearances, they also help with the aerodynamics of a car by lowering drag, or helping on putting more downforce on the car, maximizing its contact with the ground for maximum traction and grip to increase stability.
Specifics and Benefits:
Made of High Quality Lightweight Carbon Fiber Glass for Extreme Strength
Enhances Aerodynamic
i.e. Reduces Drag, Increases Fuel Efficiency, Reinforces Downforce, Traction and Stability
Overall Length: 69.50”
Overall Width: 14.25” (Maximum Distance)
Overall Height: 17.00” (Maximum and Approximate, Depends on Angles’ Discrepancies)
Wing Width: 15.25" (Maximum Distance)
Rack Width/ Height: 7.00” - 14.75" (Rack Tall)
Bolt-On Design, Easy to Install (Drilling might be Required)
Professional Installer is Highly Recommended (No Instruction Included)
|,|"Shipping & handling" "add(+$95)|-||-|||-||MAZDA-MIATA-CARBON-FIBER-FENDER-FLARES-1990-1997|,||,|Mazda Miata Carbon Fiber Fender Flares 1990-1997|,|CMCF58-CARBON-FIBER|,|699.99|,|529.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Carbon Fiber Fender Flares 1990-1997
These Miata Carbon Fiber Fender Flares fits perfectly on your existing fenders. Made with high quality carbon fiber, they are perfect for people willing to run wider wheels.
They also give a unique style to your Roadster: Wider, meaner, more aggressive. We attached a lot of importance to the fitment of this piece so we can ensure you a really good fit. No DIY, trimming, cutting required!!! Only sanding, painting and fitting!
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
- Weight: 0.4kg/side for fiberglass and 0.3 kg/side for carbon fiber
*Availability: 30 - 40 days production time
|,|"Shipping Cost" "add(+$59)"|-||-|||-||MAZDA-MIATA-HARDTOP-RAIN-RAILS|,||,|Mazda Miata Carbon Fiber Hardtop Rain Rails 1990-1997|,|CMCF18|,|229.99|,|176.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Fiber Hardtop Rain Rails 1990-1997
The Mazda Miata Carbon Fiber Hardtop Rain Rails prevent the water to enter into the car. As we know, after a strong rain, the water stays on top of the roof. At the first corner, the water will slide into the car making your pants wet.
Easy installation, 3M tape is included.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fiber manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||MAZDA-MIATA-CARBON-FIBER-HEADLIGHT-COVERS-FOR-1990-1997--UNVENTED-|,||,|Mazda Miata Carbon Fiber Headlight Covers for 1990-1997 (Unvented)|,|CM-HC1-NA|,|299.99|,|231.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Fiber Headlight Covers for 1990-1997 (Unvented)
Availability: 7 - 14 days production time
Those carbon fiber headlights covers replace the existing heavy metal covers on all Mk1/NA. Ultra light (0.2 Kg - 0.45 Pound per piece compared to the 0.75 Kg - 1.65 Pounds of the OEM one so more than 1kg saved), they give a unique style to your front and make it lighter.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fiber manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||CM-LP1-NA|,|20MIMIEXPA|,|Mazda Miata Carbon Fiber License Plate Frame |,|CM-LP1-NA|,|85.00|,|77.55|,||,||,||,||,||,||,|Mazda Miata Carbon Fiber License Plate Frame
This carbon fiber license plate frame adds a nice touch to the rear of your car. Made for US size license plate.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
Available in Carbon Fiber (CF) and Carbon Kevlar (CK).
|,|"Select Option" "Carbon Fiber" "Carbon Kevlar add(+$20)"|-||-|||-||50-67-8110|,|SHOP-BY-SALE|,|Mazda Miata Carbon Fiber Racing Hardtop 1990-1997|,|50-67-8110|,|3,999.99|,|2,740.00|,||,||,||,||,||,||,|Mazda Miata Carbon Fiber Racing Hardtop 1990-1997
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
Carbon Fiber Hardtop from DG Motorsports.
- Extra light weight for racing (18 pounds)
- Includes rear non-glass shatterproof window - NEW! NOW FULL SIZE WINDOW!
- NEW! Includes front, side and rear mounting brackets
- Glossy finish, this top is gorgeous
- Superior fit, top quality
This hardtop is designed for racing and comes without side window seals and rear deck seals.
|,|"Side Window (L/R) and Rear Deck Seals" "Select Here" "No" "Yes add(+$245)"|-||-|"Freight Shipping Cost" "add(+$419)"|-||-|||-||50-63-8110|,|SHOP-BY-SALE|,|Mazda Miata Carbon Fiber Racing Hardtop 1999-2005|,|50-63-8110|,|4,199.99|,|2,740.00|,||,||,||,||,||,||,|Mazda Miata Carbon Fiber Racing Hardtop 1999-2005
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
Carbon Fiber Hardtop from DG Motorsports.
- Extra light weight for racing (18 pounds)
- Includes rear non-glass shatterproof window - NEW! NOW FULL SIZE WINDOW!
- NEW! Includes front, side and rear mounting brackets
- Glossy finish, this top is gorgeous
- Superior fit, top quality
This hardtop is designed for racing and comes without side window seals and rear deck seals.
|,|"Side Window (L/R) and Rear Deck Seals for Hardtop" "Select Here" "No" "Yes add(+$245)"|-||-|"Freight Shipping Cost" "add(+$419)"|-||-|||-||MAZDA-MIATA-CARBON-FIBER-STREET-HARDTOP-1990-1997|,|SHOP-BY-SALE|,|Mazda Miata Carbon Fiber Street Hardtop 1990-1997|,|NA-50-67-8200|,|3,899.99|,|2,740.00|,||,||,||,||,||,||,|Mazda Miata Carbon Fiber Street Hardtop 1990-1997
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
*Additional shipping charges may apply outside of 48 contiguous states
* Includes rear non-glass MOLDED, FULL SIZE window
* Includes front, side and rear mounting brackets
* Includes side window seals and rear deck seals
* Finished with a clear topcoat
* Superior fit, top quality - BEAUTIFUL!
NOTE: This model is called a "street" model because it comes with weatherproofing seals and a molded rear window. It is not, however, a factory hardtop. First of all, it weighs less than half of a factory top - this makes it super easy to put on and take off, but does not keep out the road noise quite as well as one twice its weight. The mounting brackets are custom made for the top, and the window seals, although effective, are not molded to the window like those in a factory top. The molded rear window looks great and is weather-proof, however it is not glass, and does not have a defrosting option. Bottom line - this is a very nice top, easy to install, and looks great - but it is not a factory top, and will not provide exactly the same the comfort/noise reduction that a factory top will.
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||MAZDA-MIATA-CARBON-FIBER-STREET-HARDTOP-1999-2005|,|SHOP-BY-SALE|,|Mazda Miata Carbon Fiber Street Hardtop 1999-2005|,|NB-50-67-8200|,|4,199.99|,|2,740.00|,||,||,||,||,||,||,|Mazda Miata Carbon Fiber Street Hardtop 1999-2005
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
*Additional shipping charges may apply outside of 48 contiguous states
* Includes rear non-glass MOLDED, FULL SIZE window
* Includes front, side and rear mounting brackets
* Includes side window seals and rear deck seals
* Finished with a clear topcoat
* Superior fit, top quality - BEAUTIFUL!
NOTE: This model is called a "street" model because it comes with weatherproofing seals and a molded rear window. It is not, however, a factory hardtop. First of all, it weighs less than half of a factory top - this makes it super easy to put on and take off, but does not keep out the road noise quite as well as one twice its weight. The mounting brackets are custom made for the top, and the window seals, although effective, are not molded to the window like those in a factory top. The molded rear window looks great and is weather-proof, however it is not glass, and does not have a defrosting option. Bottom line - this is a very nice top, easy to install, and looks great - but it is not a factory top, and will not provide exactly the same the comfort/noise reduction that a factory top will.
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||SLICK-AUTO-MAZDA-MIATA-CARBON-FIBER-HEADLIGHT-COVERS-1990-1997|,|SHOP-BY-SALE|,|Mazda Miata Carbon Fiber Vented Headlight Covers for 1990-1997|,|CM-HC5-NA|,|399.99|,|319.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Carbon Fiber Vented Headlight Covers for 1990-1997
Availability: 7 - 14 days production time
Those carbon fiber headlight covers replace the existing heavy metal covers on all Miata Mx-5 Eunos Mk1/NA. Ultra light (0.2 Kg - 0.45 Pound per piece compared to the 0.750 Kg - 1.65 Pounds of the OEM one so more than 1 Kg - 2.2 Pounds saved), offering a great way to keep your engine bay cold (20% more air). Perfect for people using ITB's!
Specifications:
- 3K Carbon Fiber 1x1 twill (Made in Japan)
- 240g+450g Carbon Fiber manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
|,|"SELECT VENT SIDE" "SELECT HERE" "Only LHS Vented"|-||-|||-||MAMICANET19|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Mazda Miata Cargo Net 1999-2005|,|920-120|,|29.99|,|24.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Cargo Net. Keep those small items from rolling around in the trunk. Easy installation.
|,|||-||MAMICANET20|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Mazda Miata Cargo Net 2006-2013|,|920-125|,|49.99|,|43.10|,||,||,|0.000 |,||,||,||,|Mazda Miata Cargo Net. Keep smaller items from rolling around in your MX-5 cargo area. Custom designed, easy install and removed.
|,|||-||MAZDA-MIATA-CARPETED-FLOOR-MATS-1999---2005-BLACK-OR-TAN|,|INSETE|,|Mazda Miata Carpeted Floor Mats 1990 - 2015 (Black or Tan)|,|NAB-5268-MS|,|189.99|,|148.99|,||,||,||,||,||,||,|b>Mazda Miata Carpeted Floor Mats 1990 - 2015 (Black or Tan)
Unlike other commonly available replacement floor mats, our Miata floor mats are designed to be year specific so they trace the foot rest and floor pan area correctly; this gives your 1999-2005 Miata perfect fitment like the original factory mats.
These plush premium quality floor mats are available in factory black or Tan with logo. A special non slip padding on the back helps prevent movement. You will be truly impressed with our quality and value.
|,|"Select Year" "Select Here" "1990-2005" "2006-2015"|-||-|"Select Color" "Select Here" "Black/Red M/Black Binding 90-05" "Black/Red Roadster/Black Binding 90-05" "Black/Silver M/Black Binding 90-05" "Black/Silver Roadster/Black Binding 90-05" "Black/Red Binding/Red M 90-05" "Black/Red Binding/Red Roadster 90-05" "Black/Black Binding/No Logo 90-05" "Tan/Black M/Tan Binding 90-05" "Tan/Black Roadster/Tan Binding 90-05" " " "Black/Red Roadster/Black Binding 06-15" "Black/Red Roadster/Red Binding 06-15" "Black/Silver Roadster/Black Binding 06-15" "Black/Silver Roadster/Silver Bining 06-15" "|-||-|||-||903-285|,|20MAMIINFL|,|Mazda Miata Carpeted Floor Mats with Roadster Logo 1990-2015 (Black) |,|903-285|,|89.99|,|78.90|,||,||,||,||,||,||,|Mazda Miata Carpeted Floor Mats with Roadster Logo 1990-2015 (Black)
Black/Silver Roadster
|,|"Select Year" "Select Here" "1990-1997" "1999-2005" "2006-2015 add(+8)"|-||-|||-||CM-CC1-NC|,||,|Mazda Miata Center Console (NC2/NC3 OEM replica) 2006-2015|,|CM-CC1-NC|,|355.95|,|319.99|,||,||,||,||,||,||,|Mazda Miata Center Console (NC2/NC3 OEM replica) 2006-2015
This carbon fiber center console replaces the whole center console on all models Miata 2009-2015 (NC2/NC3 only). The backside has the tabs to fit the gearshift cover, the sliding armrest and the window switch just like the OEM console. Gives a racing style to your interior.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
Available in Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Select Option" "Glossy Carbon Fiber" "Glossy Carbon Kevlar add(+$20)" "Matte Carbon Fiber" "Matte Carbon Kevlar add(+$20)"|-||-|||-||JARAMIHE19|,|19MAMIEXSYMU|,|Mazda Miata Ceramic Coated Headers by Cobalt 1990-1997|,|JRG-903-110|,|689.99|,|599.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Ceramic Coated Headers by Cobalt 1990-1997
This Cobalt header pulls hard through a wide power-band without that head-throbbing resonance often found in low-quality headers.Emissions legal in all 50 states; its features include: heavy gauge steel, mandrel bent tubes, CNC-machined flanges and ceramic coating. The result is a Tig-welded header that provides maximum performance, total precision and lifelong durability. Manual transmission only.
*NOTE: -Cobalt headers were designed to fit with all JR M45 & Moss MP62 Superchargers!
|,|"Select Year" "Select Here" "1990-93 1.6L" "1994-97 1.8L"|-||-|"Shipping Cost" "add(+$89)"|-||-|||-||MAMICHDEVEPA|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Chrome Defroster Vents - Pair 1999 - 2005|,|904-351|,|79.99|,|59.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Chrome Defroster Vents - Pair 1999 - 2005
It’s those little details that matter. Toss those drab plastic defroster vents and replace them with a pair in Chrome!
|,|||-||CHROMFUELDOO|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata Chrome Fuel Door 1990-1997|,|904-172|,|169.99|,|149.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Chrome Fuel Door 1990-1997
This beautiful chrome fuel door installs easily, in about 15 minutes. It requires no drilling. Simply bolts on!
It also sits flush with the body and works with the existing cap release. This is a really cool accessory to make your Mazda Miata stand out.
|,|||-||0000-8R-D20|,|20MAMIEXFULI|,|Mazda Miata Chrome Fuel Filler Door Soft Top Only 2006-2015|,|904-414|,|171.95|,|149.98|,||,||,||,||,||,||,|Mazda Miata Chrome Fuel Filler Door Soft Top Only 2006-2015
Add the look of trick, hand crafted, one off race parts to your Miata. The chrome plated cast alloy Fuel Door Kits are as functional as they are stylish. Installed in about 10 minutes using existing mounting holes. Uses your stock remote lid opener. Kit is complete and ready to install. Instructions included.
|,|||-||MAZDA-MIATA-CHROME-FUEL-LID-DOOR-1999-2005|,|NBFUELLIDS|,|Mazda Miata Chrome Fuel Lid Door 1999-2005|,|904-171-FUEL-DOOR|,|169.99|,|149.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Chrome Fuel Lid Door 1999-2005
This beautiful chrome fuel door installs easily, in about 15 minutes. It requires no drilling. Simply bolts on!
It also sits flush with the body and works with the existing cap release. This is a really cool accessory to make your Mazda Miata stand out.
|,|||-||MAMICHHEKNSO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Chrome Heater Knobs (Set of 4) 1999 - 2005|,|903-265|,|89.99|,|74.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Chrome Heater Knobs (Set of 4) 1999 - 2005
Chrome accents add an elegance like no other modification. Ours are made from billet aluminum that is chrome plated for high lustre and enduring finish. Pieces install easily with 3M adhesive and include instructions.
|,|||-||MAZDA-MIATA-CHROME-MIRRORS-SET-MIATA-MX-5-1990-1997-SET-OF-2-MANUAL|,|NAEXAC|,|Mazda Miata Chrome Manual Side Mirror Set 1990-1997 (Pair)|,|909-351|,|259.99|,|198.02|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Chrome Mirrors Set for years 1990-1997 Set of 2 Manual
This is a complete set of two manual mirrors what fits all Mazda® MX-5 Miata 1990-1997. The mirrors feature Ultra Tuff Chrome plated ABS exterior with with stainless steel internal components; a new the gasket for the mirror foot that can installed and de-installed again with no issues because of I.L Motorsports improved design.
Note Because Mazda® modified of the doors in between before VIN. 131.000 require minor modification which entails cutting off a guide pin at the bottom of the base.
Note these mirrors are directly replacement for manual adjustment mirrors.
|,|||-||905-273|,|20MAMIINAC|,|Mazda Miata Chrome Seat Belt Guide Covers by IL Motorsport 2006-2008|,|905-273|,|55.12|,|34.98|,||,||,||,||,||,||,|Mazda Miata Chrome Seat Belt Guide Covers by IL Motorsport 2006-2008
Chrome accents add elegance like no other modification. These are made from billet aluminum that is chrome plated for high luster and enduring bright finish. Most pieces install easily with 3M adhesive and include instructions where necessary.
|,|||-||907-045|,|20MAMIINAC|,|Mazda Miata Chrome Seat Belt Tower 2006-2015|,|907-045|,|39.99|,|24.98|,||,||,||,||,||,||,|Mazda Miata Chrome Seat Belt Tower 2006-2015
Chrome accents add elegance like no other modification. Most pieces install easily with 3M adhesive and include instructions where necessary.
Note: Soft Top Only
|,|||-||MAMICHSHPLWO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Chrome Shifter Plate w/o Ring 1999 - 2005|,|916-036|,|129.99|,|104.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Chrome Shifter Plate w/o Ring 1999 - 2005
Chrome accents add an elegance like no other modification. Ours are made from billet aluminum that is chrome plated for high luster and enduring finish. Installation requires drilling.
|,|||-||MAMICHSHPLWI1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata Chrome Shifter Plate With Ring 1990 - 1997 |,|916-034|,|159.99|,|139.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Chrome Shifter Plate With Ring 1990 - 1997
Chrome accents add an elegance like no other modification. Ours are made from billet aluminum that is chrome plated for high lustre and enduring finish. Pieces install easily with 3M adhesive and include instructions.
|,|||-||MAMICHTTSTVE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata Chrome TT Style Vent Rings - Set of 4 - 1990 - 2005|,|916-022|,|119.99|,|89.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Chrome TT Style Vent Rings - Set of 4 - 1990 - 2005
Chrome accents add an elegance like no other modification. Ours are made from billet aluminum that is chrome plated for high lustre and enduring finish. Pieces install easily with 3M adhesive and include instructions.
|,|||-||904-355|,|20MIMIEXPA|,|Mazda Miata Chrome Windshield Washer Covers by IL Motorsport 1990-2015|,|ms-904-355|,|19.55|,|16.98|,||,||,||,||,||,||,|Mazda Miata Chrome Windshield Washer Covers by IL Motorsport 1990-2015
Chrome nozzle covers dress up the hood of your Miata! Slip these on for a decorative touch of class. Please note that Mazda used 15 mm or 21 mm long nozzles indiscriminately of model year, please measure your car's nozzles before ordering.
Note: Sold as a pair.
|,|"Select Year" "Select Here" "1990-2005 15MM" "1990-2005 21MM" "2006-2015 add(+$3)"|-||-|||-||NA1-5147|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Chrome/Leather Shift Knobs 1990-2018|,|ms-906-070|,|49.95|,|39.98|,||,||,||,||,||,||,|Mazda Miata Chrome/Leather Shift Knobs 1990-2018
If you have any chrome trim pieces in the interior of your cockpit, these shift knobs are for you. We start out with a Chromed Knob, then carefully apply a trim of leather in your favorite color. Lastly we add the "M" from the Miata script. All of our shift knobs also include a Delrin self tapping bushing. This allows you to firmly tighten the knob while allowing you the ability to orient the "M" in just the position you like. Only fits manual transmission.
|,|"Select Color" "Select Here" "Red" "Black"|-||-|||-||CLEAR-3RD-BRAKE-LIGHT-1999-2005|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata Clear 3rd Brake Light 1990-2005|,|902-995|,|149.99|,|114.98|,||,||,||,||,||,||,|Mazda Miata Clear 3rd Brake Light 1999-2005
Our clear 3rd brake light is a factory direct replacement that is truly a plug-n-play component that maintains your factory look. All hardware is included. Lights up bright red with 6 internal LED's and a perfect match to our Euro Spec Tail Lamps.
*** Product images may differ from actual product appearance ***
|,|"Select Year" "Select Here" "1990-1997" "1999-2005 (902-996) add(+$5)"|-||-|||-||CLUBNA-35MM-HORN-BUTTON|,|NAACCESSORIES|,|Mazda Miata Club NA 44mm Classic Horn Button|,|clubna-35mm-horn-button|,|89.00|,|75.04|,||,||,|0.000 |,||,||,||,|Mazda Miata Club NA 44mm Classic Horn Button
*Availability: Ships in 5-10 business days
Product from Japan made by Club-NA. Compatible with Nardi/MOMO steering wheels.
• V-Special logo horn button
• END OF PRODUCTION, LIMITED QUANTITIES
• High quality product from Japan
|,|"Surround Finish" "Gloss Black"|-||-|"Steering Wheel Type" "Momo" "Nardi add(+$5)"|-||-|||-||CLUBNA-EUNOS-SILVER-KEY-BLANK|,|NAACCESSORIES|,|Mazda Miata Club NA Eunos Key Blank Plain|,|clubna-eunos-silver-key-blank|,|109.00|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Club NA Eunos Key Blank Plain
*Availability: Ships in 5-10 business days
Product from Japan made by Club-NA.
• Same as original V-Special Keys.
• High quality product from Japan
• Available for NA Miata (1989-1997) and NB Miata without Chip
|,|||-||CLUBNA-SHIFTER-RING|,|INSETE|,|Mazda Miata Club NA Shifter Ring 1990-1997|,|clubna-shifter-ring|,|160.00|,|154.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Club NA Shifter Ring 1990-1997
*Availability: Ships in 5-10 business days
Product made by Club-NA. Want to add some punch to your center console ? This item may suit your needs! Installed by using double-sided adhesive tapes.
• Silver aluminum
• Replica of the discontinued EUNOS famous accessory
• Perfect fit
• Easy installation (fake bolts)
• ONLY available for NA Miata (1989-1997)
|,|"Year" "1990-1993" "1994-1997"|-||-|||-||998-217|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Cobalt Billet Finish Performance Pedal Set 2006-2021+|,|998-217|,|79.99|,|64.98|,||,||,||,||,||,||,|Mazda Miata Cobalt Billet Finish Performance Pedal Set 2006-2021+
Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Cobalt's billet pedal system is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to "Heel & Toe". Set includes Accelerator, Brake, Clutch and Footrest pedals. Comes complete with instructions and easily installed using simple hand tools, may require drilling.
|,|"Select Year" "Select Here" "2006-2015 Manual Transmission" "2016-2021+ Manual Transmission"|-||-|"Select Roadster Logo" "Select Here" "No Logo" "Yes Logo"|-||-|||-||MIPEBIPESETB|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Cobalt Matte Finish Performance Pedal Set 2006-2021+|,|CBT-998-270|,|79.95|,|69.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Cobalt Matte Finish Performance Pedal Set 2006-2021+
Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Cobalt's billet pedal system is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to ""Heel & Toe"". Set includes Accelerator, Brake, Clutch and Footrest pedals. Comes complete with instructions and easily installed using simple hand tools, may require drilling.
|,|"Select Year" "Select Here" "2006-2015 Auto Transmission" "2006-2015 Manual Transmission" "2016-2021+ Manual Transmission add(+$7)"|-||-|"Select Roadster Logo" "Select Here" "No Logo" "Yes Logo"|-||-|||-||MAMICOPEBIPE|,|NBINAC1|,|Mazda Miata Cobalt Performance Billet Pedal Set 1999-2005|,|MOS-998-203|,|69.95|,|59.95|,||,||,|0.000 |,||,||,||,|Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Our billet pedal system is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to "Heel & Toe". Set includes Accelerator, Brake, Clutch and Footrest pedals. Comes complete with instructions and easily installed using simple hand tools.
|,|"Select Year and Style" "99-05 Roadster Logo, Billet, Manual" "99-05 No Logo, Billet, Manual" "99-05 No Logo, Billet, Auto"|-||-|||-||MAMICOPEGRST1|,|NBINPE|,|Mazda Miata Cobalt Performance Grid Style Billet Pedal Set Black/Silver 1999-2005|,|MOS-909-261|,|145.95|,|129.95|,||,||,|0.000 |,||,||,||,|Now available - an ultra-high performance grip design in a choice of two colors! Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Our billet pedal system is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to "Heel & Toe". Set includes Accelerator, Brake, Clutch and Footrest pedals. Comes complete with instructions and easily installed using simple hand tools.
Click Here for Instructions
|,|||-||MAMICOPEGRST|,|NAPEDALS|,|Mazda Miata Cobalt Performance Grid Style Billet Pedal Sets 1990-1997|,|MOS-909-257|,|129.99|,|99.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Cobalt Performance Grid Style Billet Pedal Sets 1990-1997
Now available - an ultra-high performance grip design in a choice of two colors! Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Our billet pedal system is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to "Heel & Toe". Set includes Accelerator, Brake, Clutch and Footrest pedals. Comes complete with instructions and easily installed using simple hand tools.
Click Here for Instructions
|,|"Select Finish" "Select Here" "Silver" "Black/Silver add(+$25)"|-||-|||-||MAMICOPEGRST2|,|20MAMIINPE|,|Mazda Miata Cobalt Performance Grid Style Billet Pedal Sets 2006-2015|,|MOS-909-259|,|109.95|,|99.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Cobalt Performance Grid Style Billet Pedal Sets 2006-2015
Now available - an ultra-high performance grip design in a choice of two colors! Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Our billet pedal system is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to "Heel & Toe". Set includes Accelerator, Brake, Clutch and Footrest pedals. Comes complete with instructions and easily installed using simple hand tools.
Click Here for Instructions
|,|"Select Finish" "Select Here" "Silver" "Black/Silver add(+$25)"|-||-|||-||COCARO3MIPOS|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata Complete Cat-Back RoadsterSport 3 Polished Stainless Steel Exhaust for 1990-1997|,|61-0171|,|789.99|,|548.00|,||,||,|10.000 |,||,||,||,|Mazda Miata Complete Cat-Back RoadsterSport 3 Polished Stainless Steel Exhaust for 1990-1997
It is BACK! By popular demand we once again have a RoadsterSport exhaust for 90-97 Miatas! Includes the connecting pipe! We took the RoadsterSport 3 features of our 99-05 design and applied them to a complete redesign of our exhaust for 90-97 Miatas.
Proper Sports Car sound with a deep mellow tone at cruise and a vintage bark when you put your foot into it....our favorite Miata exhaust choice. This Miata exhaust is the ONLY 90-97 Miata exhaust with adjustable sound! Includes our unique removeable baffle cone tips so YOU are in control of the sound level and can adjust for extra sporty or calm it down to mellow for longer trips.
ALL STAINLESS STEEL and lifetime warranty!
INCLUDES COMPLETE MIDPIPE section so that it this is a COMPLETE BOLT ON solution from your converter flange back. Built in solid 304 stainless steel and completely polished to a mirror finish, this high quality Miata exhaust is our only choice that incorporates a baffle insert that gives YOU control over the final sound level (baffle in is about 15% more sound than stock, baffle out is about 25% more sound than stock...so you always have a choice for those longer trips. And, you always have the option of our packed baffle to calm it down even more, which are sold here separately on this website. With an ear pleasing exhaust note, great price and easy installation this Miata exhaust is a great beginning for Miata performance modifications.
APPLICATION NOTES: Includes the midpipe which is a separate cost item with some of our other choices (Racing Beat). The slightly larger tubing of the RoadsterSport Miata muffler means a slightly deeper tone and a little more burble on decel than the factory exhaust, 2.25 inch tube size all the way and finished with 3 inch tip, SMOOTH bends, straight through SMOOTH perforated core design for maximum horsepower.
Click on the Inset for the DYNO DYNAMICS DYNAMOMETER
|,|"Shipping Cost" "add(+$95)"|-||-|||-||GASKITCOM90|,|19MAMIEXVEAL1|,|Mazda Miata Complete Gasket Kit 1990-2005|,|195-400|,|59.99|,|45.00|,||,||,|0.000 |,||,||,||,|Complete exhaust system gasket packages are available for your Mazda Miata. The kit for the 1990-1993 Miata (1600cc engine) includes (A) header/exhaust manifold gasket, Qty 2, (B) Catalytic Converter Gaskets, Qty 2, C) Connecting Pipe to Muffler Canister Gasket, Qty 1
|,|"Select Year" "1990-1993" "1994-1997" "1999-2005"|-||-|||-||MAZDA-MIATA-CONVERTIBLE-TOP-WEATHER-STRIPPING-1990-1997|,|SOFT-TOP|,|Mazda Miata Convertible Top Weather Stripping 1990-2005|,|909-855|,|291.44|,|234.90|,||,||,||,||,||,||,|Mazda Miata Convertible Top Weather Stripping 1990-2005
Set of 6. For both Driver Side and Passenger Side.
New top seals from IL Motorsport are the same high quality as OEM, without the Mazda sticker shock price! If you are replacing an old convertible top now is the time to replace these seals. Or maybe you've noticed that your existing seals aren't keeping as much weather out as they could. This kit of 6 pieces is everything you need to get your window to perfectly seal to your top once again.
|,|||-||910-850|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Mazda Miata Coolant Reroute Kit by Cobalt 1994-2005|,|910-850|,|315.95|,|249.98|,||,||,||,||,||,||,|Mazda Miata Coolant Reroute Kit by Cobalt 1994-2005
We all want our Miata's to run as best they can but did you know that your Miata, from the factory, isn't running as optimally as it could? The Miata's engine was originally designed for a front wheel drive chassis so to make this engine work in a rear wheel drive chassis Mazda had to move things around and one of the things they moved around was how the coolant runs through the engine. To package the motor they moved the coolant exit from the rear of the engine to the front. This is great for packaging but not great for coolant flow, to fix the issue we moved the exit back to its rightful place and restored the correct flow of coolant through your engine.
Our kit comes with a brand new custom bent stainless steel EGR tube. We include the EGR tube because we want to not only make sure that there are no check engine lights but that you also have an easier time installing our kit. You also get with the kit our custom-machined thermostat spacer. We designed the spacer to retain the factory coolant temperature sensor positions, which means no cutting or extending those wires. The custom one-piece coolant hose that we include cuts down on failure points and is made of silicone so will last longer than rubber. Finally, we include all of the needed hardware and gaskets as well as complete instructions to make the install as easy as possible.
|,|"Select Year" "Select Here" "1994-1997 W/ ERG Tube add(+$70)" "1994-2005 No ERG Tube" "2001-2005 & 1999-2000 W/ Cobalt Header W/ ERG Tube add(+$60)"|-||-|||-||MAZDA-MIATA-COVERCRAFT-CAR-COVER-BAG|,|20MAMICARCAS3|,|Mazda Miata Covercraft Car Cover "Bag"|,|ZBAGXX|,|14.99|,|9.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Covercraft Car Cover Bag
Product Description
• Take care of your car cover when it's time to drive with a Covercraft Car Cover Storage Bag
• Compact bag fits easily in trunk or on garage shelves
• Drawstring closure seals bag tight
• Barrier of protection against dust, and in certain cases liquids
• Packing limits cover exposure to tears, wrinkles, stains
Your car cover takes care of your Mazda Miata, so it only makes sense to take care of the cover itself. A Covercraft Car Cover Storage Bag is a great way to make sure your cover lasts.
Instead of simply rolling your cover up and tossing it into a corner, or, worse yet, pulling it off and leaving it on the ground, a Covercraft Car Cover Storage Bag gives your car cover sanctuary. Keeping out dust and, in some cases, liquids (depending on the cover's material), these cover storage bags feature drawstring closures that tighten easily to seal off your cover from any dangers lurking in your garage or trunk. Pack it up, put it where it goes, and drive off with confidence that the next time you need to use your car cover, it will be ready for action.
Protect the car cover that protects your Mazda Miata with a Covercraft Car Cover Storage Bag.
|,|||-||MAZDA-MIATA-COVERCRAFT-CAR-COVER-WEATHERSHIELD-BAG|,|20MAMICARCAS3|,|Mazda Miata Covercraft Car Cover "WeatherShield Bag"|,|ZBAGPG|,|29.99|,|19.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Covercraft Car Cover "WeatherShield Bag"
Product Description
• Take care of your car cover when it's time to drive with a Covercraft Car Cover Storage Bag
• Compact bag fits easily in trunk or on garage shelves
• Drawstring closure seals bag tight
• Barrier of protection against dust, and in certain cases liquids
• Packing limits cover exposure to tears, wrinkles, stains
Your car cover takes care of your Mazda Miata, so it only makes sense to take care of the cover itself. A Covercraft Car Cover Storage Bag is a great way to make sure your cover lasts.
Instead of simply rolling your cover up and tossing it into a corner, or, worse yet, pulling it off and leaving it on the ground, a Covercraft Car Cover Storage Bag gives your car cover sanctuary. Keeping out dust and, in some cases, liquids (depending on the cover's material), these cover storage bags feature drawstring closures that tighten easily to seal off your cover from any dangers lurking in your garage or trunk. Pack it up, put it where it goes, and drive off with confidence that the next time you need to use your car cover, it will be ready for action.
Protect the car cover that protects your Mazda Miata with a Covercraft Car Cover Storage Bag.
|,|||-||CROSDRILANDS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Cross Drilled and Slotted Rotors - "Front Set" - Sale! |,|MS-904-692|,|261.66|,|159.98|,||,||,|0.000 |,||,||,||,|Get the stopping power you need with with these exceptional rotors.
These cross-drilled slotted rotors lower brake temperatures and reduce rotational mass.
Not to mention they give a your Miata a great high-performance look.
|,|"Select Year" "Select Here" "1990-1993" "1994-2000 & 2001-2002 Standard Suspension" "2001-2002 Sport Suspension & 2003-2005 add(+$40)" "2006-2015 add(+$50)"|-||-|||-||CROSDRILANDS1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Cross Drilled and Slotted Rotors - Rear Set|,|GWR-131065|,|261.66|,|207.66|,||,||,|0.000 |,||,||,||,|Get the stopping power you need with with these exceptional rotors.
These cross-drilled slotted rotors lower brake temperatures and reduce rotational mass.
Not to mention they give a your Miata a great high-performance look.
|,|"Select Year" "Select Here" "1990-1993" "1994-2000 & 2001-2005 Non-Sport Suspension" "2001-2005 Sport Suspension" "2006-2015"|-||-|||-||CRCOREBR1|,|19MAMIENPESU|,|Mazda Miata Cruise Control Relocation Bracket 1990-1997|,|DDM-05-002|,|109.99|,|74.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Cruise Control Relocation Bracket 1990-1997
Not just a cheap piece of metal to hold the cruise control actuator, this engineered piece is precision made from 304 stainless steel and holds the cruise control actuator securely. Locates the cruise actuator in the same location Mazda put it on the second generation Miata's. the kit comes with the stainless bracket, 4' of vacuumm tubing and zip ties to secure the tubing in place. This relocation kit is needed when ordering a supercharger cold air intake.
|,|||-||CUSCO-FRONT-STRUT-BAR|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Cusco Front Strut Bar 2016+|,|cusco-front-strut-bar|,|459.90|,|349.95|,||,||,||,||,||,||,|Mazda Miata Cusco Front Strut Bar 2016+
Front strut tower bar made by Cusco of Japan for the 2016+ ND MX-5. This strut bar is a stiffer, stronger bar that will replace the stock unit. This mounts at the same points as the stock bar. Note that with this bar installed the black plastic engine cover may not fit.
-Stiffen up the front of the vehicle
-Looks great under the hood
-Quality part made in Japan
-Mazda air cowl panel REQUIRED for installation (part #N244 56 35X)
-Only available for the ND (2016+) Miata
|,|"Select Option" "Select Here" "Mazda Cowl Air Panel add(+$80.00)"|-||-|"Shipping & Handling fee" "add(+$89)"|-||-|||-||MAMIRESHBOON|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Custom Leather Shift Boot 1990-2022- Sale! |,|900-655|,|79.99|,|38.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Custom Leather Shift Boot 1990-2022
Add some luxury to your interior with an elegant leather shift boot.
|,|"Select Year" "Select Here" "1990-1997 add(+$15)" "1999-2005 add($10)" "2006-2015" "2016-2022"|-||-|"Select Color" "Select Here" "Black Leather/Black Stitching" "Black Leather/Red Stitching"|-||-|||-||MAZDA-MIATA-REAR-LEATHER-PARCEL-SHELF-COVER-1990-1997|,||,|Mazda Miata Custom Rear Leather Parcel Shelf Cover 1990-1997|,|LD-RP1-NA|,|349.99|,|209.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Custom Rear Leather Parcel Shelf Cover 1990-1997
Availability: 6-8 weeks production time
This Mazda Miata Rear Leather Parcel Shelf Cover can cover or replace the area between the 2 seats in your Miata 1990-1997. The fitment has been tested on our car and is perfect.
Really gives a nice vintage classy look to your interior.
We would like to offer the highest level of customization as possible:
- Large choice of materials: suede leather, faux leather, real leather
- Large choice of stitching colors: black, red, white, blue, green etc... (ask us what you are looking for!)
- Transmission tunnel cover, door cards and side sills covers also available for a complete interior kit!
|,|"Material" "Please Select" "Faux Leather" "Suede Leather" "Real Leather add(+$130.00)"|-||-|"Faux Leather" "Select Color" "C101" "C102" "C103" "C104" "C105" "C106" "D202" "D203" "D204" "D205" "D206" "E301" "E302" "E303" "E304" "E305" "E306"|-||-|"Real Leather" "Select Color" "A1" "A2" "A3" "A4" "A5" "A6" "A7" "A8" "B1" "B2" "B3" "B4" "B5" "B6"|-||-|"Suede Leather" "Select Color" "F1" "F2" "F3" "F4" "F5"|-||-|"Shipping Cost" "add(+$69.99)"|-||-|||-||MAZDA-MIATA-SIDE-SILLS-COVERS-1990-1997|,||,|Mazda Miata Custom Side Sills Covers 1990-1997|,|LC-SC1-NA|,|299.99|,|208.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Custom Side Sills Covers 1990-1997
Availability: 6-8 weeks production time
These side sills covers fit near the door steps in your Miata 1990-1997. It follows the shape of the sills and will go perfectly along the seats.
Really gives a nice vintage classy look to your interior.
We would like to offer the highest level of customization as possible:
- Large choice of materials: suede leather, faux leather, real leather
- Large choice of stitching colors: black, white, blue, red, green etc... (ask us what you are looking for!)
- Transmission tunnel cover, door cards and hardtop headliner also available for a complete interior kit!
|,|"Material" "Please Select" "Faux Leather" "Suede Leather" "Real Leather add(+$80.00)"|-||-|"Faux Leather" "Select Color" "C101" "C102" "C103" "C104" "C105" "C106" "D202" "D203" "D204" "D205" "D206" "E301" "E302" "E303" "E304" "E305" "E306"|-||-|"Real Leather" "Select Color" "A1" "A2" "A3" "A4" "A5" "A6" "A7" "A8" "B1" "B2" "B3" "B4" "B5" "B6"|-||-|"Suede Leather" "Select Color" "F1" "F2" "F3" "F4" "F5"|-||-|"Shipping Cost" "add(+$59.99)"|-||-|||-||MAZDA-MIATA--TRANSMISSION-TUNNEL-COVER-1990-1997|,||,|Mazda Miata Custom Transmission Tunnel Cover 1990-1997|,|LC-TC1-NA|,|399.99|,|219.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Custom Transmission Tunnel Cover 1990-1997
Availability: 6-8 weeks production time
This transmission tunnel cover is designed to cover the old carpet under the center console on all Miata models 1990-1997. We made the holes for the handbrake, the gearstick and for the seatbelts. Fitment is really good and easy to do by yourself. You can decide to keep your center console or use one of our short console we are working on.
We would like to offer the highest level of customization as possible:
- Large choice of materials: suede leather, faux leather, real leather (quilted or flat design can be done)
- Large choice of stitching colors: black, white, blue, red, green etc... (ask us what you are looking for!)
- Door cards, rear parcel shelf cover and side sills covers also available for a complete interior kit!
|,|"Material" "Please Select" "Faux Leather" "Suede Leather" "Real Leather add(+$120.00)"|-||-|"Faux Leather" "Select Color" "C101" "C102" "C103" "C104" "C105" "C106" "D202" "D203" "D204" "D205" "D206" "E301" "E302" "E303" "E304" "E305" "E306"|-||-|"Real Leather" "Select Color" "A1" "A2" "A3" "A4" "A5" "A6" "A7" "A8" "B1" "B2" "B3" "B4" "B5" "B6"|-||-|"Suede Leather" "Select Color" "F1" "F2" "F3" "F4" "F5"|-||-|"Shipping Cost" "add(+$79.99)"|-||-|||-||902-535|,|NEW|,|Mazda Miata Cylinder Head Rebuild Kit 1990-2005|,|2019-0803|,|345.95|,|298.02|,||,||,||,||,||,||,|Mazda Miata Cylinder Head Rebuild Kit 1990-2005
When it comes time to change your cylinder head gasket, ordering one part number and getting everything you need at once makes the job so much simpler. These kits contain pretty much everything you'll need while doing this job.
|,|"Select Year" "Select Here" "1990-1993" "1994-1997 add(+$70)" "1999-2000 add(+$60)" "2001-2005 add(+$70)" "2001-2005 Mazdaspeed add(+$60)"|-||-|||-||MIHUBADPLPL1|,|BLACKFRIDAYSALE|,|Mazda Miata Daikei Hub Adapter Plug & Play 1990-1997|,|518-100|,|219.99|,|179.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Daikei Hub Adapter Plug & Play 1990-1997
These Daikei hubs are to mount Momo or Nardi steering wheels to your Miata without any permanent modification.
This Daikei hub includes factory air bag wiring harness that connects directly to your factory harness for a very clean install.
Do not be fooled with other hubs that not only require that you dremmel out hard aluminum under the hub for the clock spring, but you also need to wire in several resistors to prevent the air bag switch from activating - a real hassle.
This Daikei hub has everything you need - all you need to do is have the wheel. Fits 1990-1997 Mazda Miatas only.
|,|"Please Select Airbag Option" "Select Here" "Miata 'Without' Airbag" "Miata 'With' Airbag add(+$19.99)"|-||-|||-||MAMIHUBADPLP|,|BLACKFRIDAYSALE|,|Mazda Miata Daikei Hub Adapter Plug & Play 1999-2005|,|518-101|,|219.95|,|179.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Daikei Hub Adapter Plug & Play 1999-2005
These Daikei hubs are to mount Momo or Nardi steering wheels to your Miata without any permanent modification.
This Daikei hub includes factory air bag wiring harness that connects directly to your factory harness for a very clean install.
Do not be fooled with other hubs that not only require that you dremmel out hard aluminum under the hub for the clock spring, but you also need to wire in several resistors to prevent the air bag switch from activating - a real hassle.
This Daikei hub has everything you need - all you need to do is have the wheel. Fits 1999-2005 Miatas only.
|,|"Please Select Airbag Option" "Select Here" "Miata 'Without' Airbag" "Miata 'With' Airbag add(+$19.99)"|-||-|||-||518-102|,|20MAMIINSTWH|,|Mazda Miata Daikei Hub Adapter Plug & Play 2006-2014|,|518-102|,|249.95|,|225.02|,||,||,||,||,||,||,|Mazda Miata Daikei Hub Adapter Plug & Play 2006-2014
These Daikei hubs are to mount Momo or Nardi steering wheels to your Miata without any permanent modification.
This Daikei hub includes factory air bag wiring harness that connects directly to your factory harness for a very clean install.
Do not be fooled with other hubs that not only require that you dremmel out hard aluminum under the hub for the clock spring, but you also need to wire in several resistors to prevent the air bag switch from activating - a real hassle.
This Daikei hub has everything you need - all you need to do is have the wheel. Fits 2006-2014 Miatas only.
|,|"Please Select Year:" "Select Here" "2006-2008" "2009-2012" "2013-2014"|-||-|||-||DG-CARBON-FIBER-FRONT-END-NC|,|20MIMIEXPA|,|Mazda Miata DG Motorsports One Piece Front End 2006-2008|,|DGM-50-66-1102-3|,|2,800.00|,|2,500.00|,||,||,|0.000 |,||,||,||,|Mazda Miata DG Motorsports One Piece Front End 2006-2008
*Special Order, ship 7-10 days after purchase
*Carbon Fiber shown in Picture
*Additional shipping charges may apply outside of 48 contiguous states
This is the ultimate in weight savings and ease of access for your track car. This part replaces your hood, front bumper and front fenders. Yes, it is a bit pricey but you will have the lightest (and most awesome) car at the track. Mounting hardware NOT included.
|,|"Material" "Fiberglass" "Carbon Fiber add(+$1000)"|-||-|"Freight Shipping Cost" "add(+$299)"|-||-|||-||CLMIDOSP19|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Door Speakers Premium Upgrade 1999-2005|,|425-203|,|349.99|,|199.00|,||,||,|0.000 |,||,||,||,|
Mazda Miata Door Speakers Premium Upgrade 1999-2005
Factory speakers are made from cheap materials like paper and in most cases do not even have tweeters which means more than half of the audible frequency range is lost. Harmony Audio Rhythm series speakers are designed to directly replace the factory speakers dramatically improving sound quality and reproduce music like the artist intended. The speakers are available in a wide range of sizes and are constructed from high quality materials like polypropylene cones, durable rubber surrounds and 1/2" or larger PEI dome tweeters.
Specifications:
-6x8" / 5x7" Rhythm Series 2-Way Car Speaker Pair
-Power Handling: -Peak: 225 watts -RMS: 75 watts
-Sensitivity: 90dB
-Frequency Response: 45Hz-20kHz
-Mounting Depth: 2 1/4"
-Mounting Cutout Diameter: 4 15/16" x 7 1/16"
-Tweeter Size: 1/2"
-Single 4 Ohm
Features:
Direct Fit OEM Replacement Size
Polypropylene Injection Molded Cone
Butyl Rubber Surround
PEI Neodymium Magnet Dome Tweeter
Passive Tweeter Crossover
Steel Basket
Ferrite Magnet
Kapton Former Material
Price is for the pair.
|,|||-||CM-TP1-NC|,||,|Mazda Miata Door Top Pads (OEM replica) 2006-2015|,|CM-TP1-NC|,|359.90|,|341.95|,||,||,||,||,||,||,|Mazda Miata Door Top Pads (OEM replica) 2006-2015
These carbon fiber door top pads replace the plastic door pads on all models Miata 2006-2015. It has the cutout for the door opening just like the OEM parts. Goes very well with the dash trims we also have for RHD and LHD.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuumBAG
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
Available in Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Select Option" "Glossy Carbon Fiber" "Glossy Carbon Kevlar add(+$20)" "Matte Carbon Fiber" "Matte Carbon Kevlar add(+$20)"|-||-|||-||N0Z7-33-99ZR-T0|,|19MAMIBRRORO1|,|Mazda Miata Driver Side Front Caliper with Sport Suspension 1999-2005|,|N0Z7-33-99ZR-T0|,|185.79|,|136.79|,||,||,||,||,||,||,|Mazda Miata Driver Side Front Caliper with Sport Suspension 1999-2005
|,|||-||MAMIDUHESYBY|,|COPEAU|,|Mazda Miata Dual Headlamp System by Cobalt 1990-1997|,|906-055|,|929.99|,|784.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Dual Headlamp System by Cobalt 1990-1997
For some time, we have been working on a high quality dual headlamp kit that incorporates the features you need but eliminates the weaknesses of the products currently available. The result is the finest dual headlamp system available for the Miata with no compromises. Take a look at our feature list and compare it to anything else available. You will quickly see why this system is worth every penny.
Hella DOT Approved Lamps - These units have proper Lo Beam and Hi Beam Lamps supplied. Easily adjusted with a simple phillips screwdriver once installed. Bulb Specs: 90 mm diameter and 65 watts.
Superior Bucket Design - Our bucket is a simple one piece design. Instead of just being spray painted, they are completely powdercoated for a finish that is as long-lasting as it is beautiful. Also, our design incorporates an inner visor design that eliminates the glare coming from the inside headlight. This simple design also means an easy installation, about one hour per side.
OEM Quality Wiring Looms - The Dual Light system uses properly engineered and manufactured automotive grade wiring harnesses. These looms allow for “plug and play” installation from the Hella lamps to the factory wiring harness.
Thorough Installation Instructions - Our instructions leave nothing to the imagination. A step by step tutorial with plenty of high resolution pictures make the installation of this system easy.
|,|||-||MAZDA-MIATA-DUAL-HOOD-LIFT-KIT-CHROMED-1990-2005-|,|NBINVIALL|,|Mazda Miata Dual Hood Lift Kit 1990-2005 |,|NAB-5161|,|109.99|,|79.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Dual Hood Lift Kit 1990-2005
Dual Hood Lift kits are the best substitutes for the original prop rod; they install on both sides of the hood at the hinge and fenders.
Our handsome dual cylinder lift kit has a durable black finish, and an easy no-drill installation using factory mounting points.
Simply unlatch your hood and watch it rise like magic! No wonder these Miata Hood lifts are so popular. Fits all 1990 - 2005 Miatas.
|,|||-||NAB-5009|,|NEW|,|Mazda Miata Dual Hood Lift kit for 1990-2005|,|NAB-5009|,|99.95|,|79.02|,||,||,||,||,||,||,|Mazda Miata Dual Hood Lift kit for 1990-2005
Dual Hood Lift kits are the best substitutes for the original disturbing prop rod; they install left and right at the hinge and a fenders.
Our handsome dual cylinder lift kit, allow for and easy no drill installation to factory mounting points. supplied in a high quality durable black finish.
Simply unlatch you hood and watch the hood gently rise like magic! No wonder these Miata Hood lifts are so popular. Fits 1990 - 2005 Miata.
Features:
No drilling required for installation. No special tools required. A basic metric socket set is all you will need. No mechanical expertise required. Clears up engine bay by rendering your stock hood prop obsolete Mounts at factory mounting locations. Installs in minutes.
|,|||-||MAZDA-MIATA-DUAL-STAGE-AIR-FILTER-BY-JACKSON-RACING|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Dual Stage Air Filter by Jackson Racing 1990-1997|,|JR-901-975|,|39.99|,|29.98|,||,||,||,||,||,||,|Mazda Miata Dual Stage Air Filter by Jackson Racing 1990-1997
The Jackson Racing Air Filter is a high-performance direct replacement for the stock air filter.
This filter is made of pre-oiled foam and provides superior filtration while adding up to 3 horsepower.
|,|||-||MAMITORETRSP|,|NEW|,|Mazda Miata Ducktail Rear Spoiler 1990-1997|,|114469|,|295.55|,|254.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Ducktail Rear Spoiler 1990-1997
- Hand laid, high quality 6 oz. fiberglass
- Signature black finish
- High quality weather resistant aluminum mesh grille (where applicable)
- Proprietary polymer blend for maximum flexibility
- Increased durability and longer service life
- Reduced damage rate up to 75%
- Limited warranty and satisfaction guarantee
|,|||-||MAZDA-MIATA-2DR-WIZDOM-REAR-LIP-1999-2003|,|NBACCESSORIES|,|Mazda Miata Duraflex A-Spec Wing Spoiler 1990-2021|,|114400|,|345.00|,|252.00|,||,||,|0.000 |,||,||,||,| Mazda Miata Duraflex A-Spec Wing Spoiler 1990-2021
-Hand laid, high quality 6 oz. fiberglass
-Signature black finish
-High quality weather resistant aluminum mesh grille (where applicable)
-Proprietary polymer blend for maximum flexibility
-Increased durability and longer service life
-Modified Aerodynamics
-Reduced damage rate up to 75%
-Limited warranty and satisfaction guarantee
-The distance between the wing stand is 30.25 inches
|,|"Freight Cost" "add(+$129)"|-||-|||-||114964|,|NAEXBOST|,|Mazda Miata Duraflex Afterburner Front Bumper Cover 1990-1997|,|114964|,|349.00|,|319.00|,||,||,||,||,||,||,|Mazda Miata Duraflex Afterburner Front Bumper Cover 1990-1997
-Hand laid, high quality 6 oz. fiberglass
-Signature black finish
-High quality weather resistant aluminum mesh grille (where applicable)
-Proprietary polymer blend for maximum flexibility
-Increased durability and longer service life
-Modified Aerodynamics
-Reduced damage rate up to 75%
|,|"Shipping & Handling" "add(+$275)"|-||-|||-||MAZDA-MIATA-W-TYP-LEFT-SIDE-SKIRT-FIBERGLASS-1990-1998-|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata Duraflex Afterburner Side Skirts Rocker Panels 1990-1997|,|114966|,|289.95|,|222.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Afterburner Side Skirts Rocker Panels 1990-1997
1990-1997 Mazda Miata Duraflex Afterburner Side Skirts Rocker Panels
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$139)"|-||-|||-||MAZDA-MIATA-DURAFLEX-BOMBER-BODY-KIT-5-PIECE-1999-2005|,|NBBODYSTYLING|,|Mazda Miata Duraflex Bomber Body Kit - 3 Piece 1999-2005 - Sale! |,|102015-102017|,|749.99|,|599.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Bomber Body Kit - 3 Piece 1999-2005
1998-2005 Mazda Miata Duraflex Bomber Body Kit - 3 Piece - Includes Bomber Front Bumper Cover (102015) Bomber Side Skirts Rocker Panels (102017)
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$365)"|-||-|||-||MAZDA-MIATA-DURAFLEX-BOMBER-SIDE-SKIRTS-ROCKER-PANELS-2-PIECE-1999-2005|,|NBACCESSORIES|,|Mazda Miata Duraflex Bomber Side Skirts Rocker Panels - 2 Piece 1999-2005 - Sale! |,|102017|,|349.99|,|280.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Bomber Side Skirts Rocker Panels - 2 Piece 1999-2005
Call our customer service team to get his Holiday Discount special today.
Product Description:
1998-2005 Mazda Miata Duraflex Bomber Side Skirts Rocker Panels - 2 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Shipping Cost" "add(+$149)"|-||-|||-||MAZDA-MIATA-DURAFLEX-CIRCUIT-FRONT-FENDER-FLARES-1990-1997-2-PIECE|,|NAEXVIALL|,|Mazda Miata Duraflex Circuit Front Fender Flares 1990-1997 (2 Piece)|,|112794|,|399.99|,|269.00|,||,||,||,||,||,||,|Mazda Miata Duraflex Circuit Front Fender Flares 1990-1997 (2 Piece)
Part Description
* Hand laid, high quality 6 oz. fiberglass
* Signature black finish
* High quality weather resistant aluminum mesh grille (where applicable)
* Proprietary polymer blend for maximum flexibility
* Increased durability and longer service life
* Reduced damage rate up to 75%
* Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$129)"|-||-|||-||MAZDA-MIATA-DURAFLEX-CIRCUIT-REAR-FENDER-FLARES-1990-1997-2-PIECE|,|NAEXVIALL|,|Mazda Miata Duraflex Circuit Rear Fender Flares 1990-1997 (2 Piece)|,|112795|,|499.99|,|373.00|,||,||,||,||,||,||,|Mazda Miata Duraflex Circuit Rear Fender Flares 1990-1997 (2 Piece)
Part Description
* Hand laid, high quality 6 oz. fiberglass
* Signature black finish
* High quality weather resistant aluminum mesh grille (where applicable)
* Proprietary polymer blend for maximum flexibility
* Increased durability and longer service life
* Reduced damage rate up to 75%
* Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$129)"|-||-|||-||MAZDA-MIATA-CUSTOM-LIP-SPOILER-FIBERGLASS-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata Duraflex D Spec Rear Wing Spoiler 1990-1997|,|115322|,|419.00|,|325.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex D Spec Rear Wing Spoiler 1990-1997
-Hand laid, high quality 6 oz. fiberglass
-Signature black finish
-High quality weather resistant aluminum mesh grille (where applicable)
-Proprietary polymer blend for maximum flexibility
-Increased durability and longer service life
-Reduced damage rate up to 75%
|,|||-||114771|,|NAEXBOST|,|Mazda Miata Duraflex Demon Front Bumper Cover 1990-1997|,|114771|,|499.05|,|386.00|,||,||,||,||,||,||,|Mazda Miata Duraflex Demon Front Bumper Cover 1990-1997
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Shipping & Handling" "add(+$275)"|-||-|||-||MAZDA-MIATA-2DR-MAGNUM-SIDE-SKIRTS-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata Duraflex Demon Side Skirts Rocker Panels 1990-1997|,|114774|,|445.00|,|377.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Demon Side Skirts Rocker Panels 1990-1997
1990-1997 Mazda Miata Duraflex Demon Side Skirts Rocker Panels - 2 Piece
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$149)"|-||-|||-||MAZDA-MX-5-MIATA-DURAFLEX-CIRCUIT-REAR-WING-SPOILER-2016-2017-1-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Duraflex High Kick Rear Wing Spoiler 2016-2021 - (1 Piece)|,|116341|,|399.99|,|199.00|,||,||,||,||,||,||,|Mazda Miata Duraflex High Kick Rear Wing Spoiler 2016-2021 - (1 Piece)
Part Description
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Modified Aerodynamics
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$79)"|-||-|||-||MAZDA-MIATA-DURAFLEX-RE-FRONT-BUMPER-COVER-1-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex RE Front Bumper Cover - 1 Piece 1990-1997 - Sale! |,|100960|,|349.99|,|308.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex RE Front Bumper Cover - 1 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
1990-1997 Mazda Miata Duraflex RE Front Bumper Cover - 1 Piece
Note: fog light opening is 4"x4.5"
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$295)"|-||-|||-||MAZDA-MIATA-DURAFLEX-RE-1-BODY-KIT-4-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex RE-1 Body Kit - 4 Piece 1990-1997 - Sale! |,|110614|,|899.99|,|775.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex RE-1 Body Kit - 4 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
1990-1997 Mazda Miata Duraflex RE-1 Body Kit - 4 Piece - Includes RE-1 Front Bumper Cover (100960) Wizdom Rear Bumper Cover (100965) Wizdom Side Skirts Rocker Panels (100966)
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$395)"|-||-|||-||114845|,|NAEXVIALL|,|Mazda Miata Duraflex Rover Front Lip Spoiler Air Dam - 1 Piece 1990-1997 |,|114845|,|449.95|,|383.00|,||,||,||,||,||,||,|Mazda Miata Duraflex Rover Front Lip Spoiler Air Dam - 1 Piece 1990-1997
-Hand laid, high quality 6 oz. fiberglass
-Signature black finish
-High quality weather resistant aluminum mesh grille (where applicable)
-Proprietary polymer blend for maximum flexibility
-Increased durability and longer service life
-Modified Aerodynamics
-Reduced damage rate up to 75%
|,|"Shipping & Handling:" "add(+$295)"|-||-|||-||MAZDA-MIATA-REAR-WING-SPOILER-1999-2005|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Duraflex Skyline Wing Trunk Lid Spoiler 1990-2005|,|102221|,|349.99|,|309.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Skyline Wing Trunk Lid Spoiler 1990-2005
this wing is 51" wide from tip to tip and 35" wide from pillar to pillar, pillar height is 5 inches. will fit most applications. please measure the length of your trunk and decide if this wing will fit your vehicle appropriately.
Fits the following models: Fits All Models
|,|"Shipping Cost" "add(+$139)"|-||-|||-||MAZDA-MIATA-DURAFLEX-VADER-BODY-KIT-4-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex Vader Body Kit - 4 Piece 1990-1997 - Sale! |,|110615|,|799.99|,|611.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Vader Body Kit - 4 Piece 1990-1997
1990-1997 Mazda Miata Duraflex Vader Body Kit - 4 Piece - Includes Vader Front Bumper Cover (100961) Vader Rear Lip Under Spoiler Air Dam (100962) Vader Side Skirts Rocker Panels (100963)
Fits the following models: Fits All Models, Base Model, STO Edition, M Edition
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Modified Aerodynamics
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$395)"|-||-|||-||MAZDA-MIATA-DURAFLEX-VADER-FRONT-BUMPER-COVER-1-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex Vader Front Bumper Cover - 1 Piece 1990-1997 - Sale! |,|100961|,|279.99|,|235.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Vader Front Bumper Cover - 1 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
1990-1997 Mazda Miata Duraflex Vader Front Bumper Cover - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$295)"|-||-|||-||MAZDA-MIATA-DURAFLEX-VADER-REAR-LIP-UNDER-SPOILER-AIR-DAM-1-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex Vader Rear Lip Under Spoiler Air Dam - 1 Piece 1990-1997 - Sale! |,|100962|,|299.99|,|178.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Vader Rear Lip Under Spoiler Air Dam - 1 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
Product Description
1990-1997 Mazda Miata Duraflex Vader Rear Lip Under Spoiler Air Dam - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Shipping Cost" "add(+$99)"|-||-|||-||MAZDA-MIATA-DURAFLEX-VADER-SIDE-SKIRTS-ROCKER-PANELS-2-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex Vader Side Skirts Rocker Panels - 2 Piece 1990-1997 - Sale! |,|100963|,|219.99|,|198.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Vader Side Skirts Rocker Panels - 2 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
Product Description:
1990-1997 Mazda Miata Duraflex Vader Side Skirts Rocker Panels - 2 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$149)"|-||-|||-||1990-1997-MAZDA-MIATA-2DR-OEM-STYLE-CARBON-FIBER-HOOD|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Mazda Miata Duraflex Venom Hood 1990-1997|,|114103|,|1,049.00|,|899.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Venom Hood 1990-1997
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
Hood pins are required
|,|"Freight Cost" "add(+$349)"|-||-|||-||MAZDA-MIATA-DURAFLEX-VX-BODY-KIT-4-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex VX Body Kit - 4 Piece 1990-1997 - Sale! |,|104569|,|1,009.99|,|915.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex VX Body Kit - 4 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
1990-1997 Mazda Miata Duraflex VX Body Kit - 4 Piece - Includes VX Front Bumper Cover (104492) VX Rear Bumper Cover (104493) Vader Side Skirts Rocker Panels (100963)
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$395)"|-||-|||-||MAZDA-MIATA-DURAFLEX-VX-FRONT-BUMPER-COVER---1-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex VX Front Bumper Cover - 1 Piece 1990-1997 - Sale! |,|104492|,|499.99|,|367.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex VX Front Bumper Cover - 1 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
1990-1997 Mazda Miata Duraflex VX Front Bumper Cover - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$279)"|-||-|||-||MAZDA-MIATA-DURAFLEX-VX-REAR-BUMPER-COVER-1-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex VX Rear Bumper Cover - 1 Piece 1990-1997 - Sale! |,|104493|,|499.99|,|378.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex VX Rear Bumper Cover - 1 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
Product Description:
1990-1997 Mazda Miata Duraflex VX Rear Bumper Cover - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$239)"|-||-|||-||MAZDA-MIATA-DURAFLEX-WIZDOM-BODY-KIT---4-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex Wizdom Body Kit - 4 Piece 1990-1997 - Sale! |,|110616|,|899.99|,|747.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Wizdom Body Kit - 4 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
1990-1997 Mazda Miata Duraflex Wizdom Body Kit - 4 Piece - Includes Wizdom Front Bumper Cover (100964) Wizdom Rear Bumper Cover (100965) Wizdom Side Skirts Rocker Panels (100966)
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$395)"|-||-|||-||MAZDA-MIATA-DURAFLEX-WIZDOM-BODY-KIT-4-PIECE-1999-2005|,|NBBODYSTYLING|,|Mazda Miata Duraflex Wizdom Body Kit - 4 Piece 1999-2005 - Sale! |,|105963|,|1,099.99|,|820.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Wizdom Body Kit - 4 Piece 1999-2005
1999-2005 Mazda Miata Duraflex Wizdom Body Kit - 4 Piece - Includes Wizdom Front Bumper Cover (105960) Wizdom Side Skirts Rocker Panels (105961) Wizdom Rear Lip Under Spoiler Air Dam (105962)
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$395)"|-||-|||-||MAZDA-MIATA-DURAFLEX-WIZDOM-FRONT-BUMPER-COVER-1-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex Wizdom Front Bumper Cover - 1 Piece 1990-1997 - Sale! |,|100964|,|499.99|,|299.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Wizdom Front Bumper Cover - 1 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
1990-1997 Mazda Miata Duraflex Wizdom Front Bumper Cover - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$295)"|-||-|||-||MAZDA-MIATA-DURAFLEX-WIZDOM-FRONT-BUMPER-COVER-1-PIECE-1999-2005|,|NBBODYSTYLING|,|Mazda Miata Duraflex Wizdom Front Bumper Cover - 1 Piece 1999-2005 - Sale! |,|105960|,|429.99|,|312.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Wizdom Front Bumper Cover - 1 Piece 1999-2005
Call our customer service team to get his Holiday Discount special today.
1998-2005 Mazda Miata Duraflex Wizdom Front Bumper Cover - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
Note: bumper is designed for 01-05 models, 98-05 models will require modification to headlight areas for proper fitment.
Fits the following models: Fits All Models, LS, Mazdaspeed
|,|"Freight Cost" "add(+$295)"|-||-|||-||MAZDA-MIATA-DURAFLEX-WIZDOM-REAR-BUMPER-COVER-1-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex Wizdom Rear Bumper Cover - 1 Piece 1990-1997 - Sale! |,|100965|,|299.99|,|216.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Wizdom Rear Bumper Cover - 1 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
Product Description:
1990-1997 Mazda Miata Duraflex Wizdom Rear Bumper Cover - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Freight Cost" "add(+$209)"|-||-|||-||MAZDA-MIATA-DURAFLEX-WIZDOM-REAR-LIP-UNDER-SPOILER-AIR-DAM-1-PIECE-1999-2005|,|NBACCESSORIES|,|Mazda Miata Duraflex Wizdom Rear Lip Under Spoiler Air Dam - 1 Piece 1999-2005 - Sale! |,|105962|,|399.99|,|319.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Wizdom Rear Lip Under Spoiler Air Dam - 1 Piece 1999-2005
Call our customer service team to get his Holiday Discount special today.
Product Description:
1999-2005 Mazda Miata Duraflex Wizdom Rear Lip Under Spoiler Air Dam - 1 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Shipping Cost" "add(+$159)"|-||-|||-||MAZDA-MIATA-DURAFLEX-WIZDOM-SIDE-SKIRTS-ROCKER-PANELS-2-PIECE-1990-1997|,|NAEXBOST|,|Mazda Miata Duraflex Wizdom Side Skirts Rocker Panels - 2 Piece 1990-1997 - Sale! |,|100966|,|319.99|,|255.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Wizdom Side Skirts Rocker Panels - 2 Piece 1990-1997
Call our customer service team to get his Holiday Discount special today.
Product Description:
1990-1997 Mazda Miata Duraflex Wizdom Side Skirts Rocker Panels - 2 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
Large Freight Shipping: 70x19x12 (Estimate)
|,|"Freight Cost" "add(+$139)"|-||-|||-||MAZDA-MIATA-DURAFLEX-WIZDOM-SIDE-SKIRTS-ROCKER-PANELS-2-PIECE-1999-2005|,|NBACCESSORIES|,|Mazda Miata Duraflex Wizdom Side Skirts Rocker Panels - 2 Piece 1999-2005 - Sale! |,|105961|,|219.99|,|197.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Wizdom Side Skirts Rocker Panels - 2 Piece 1999-2005
Call our customer service team to get his Holiday Discount special today.
Product Description:
1999-2005 Mazda Miata Duraflex Wizdom Side Skirts Rocker Panels - 2 Piece
Duraflex combines fiberglass, plastic, and flex resins to obtain its unique features. Because of these features, Duraflex aero parts obtain a much higher durability rate than the average fiberglass product, resulting in reduced shipping damages up to 75%. Duraflex aero comes complete with a black primer finish, high quality mesh grille, hardware kit, and general installation guide. With Duraflex aero parts high quality is attainable without high cost.
* High Quality 6 oz. Fiberglass
* Black Primer Finish
* High Quality Mesh Grille (where applicable)
* General Instruction Guide
* Hardware Kit
* Reduced Damage Rate Up To 75%
|,|"Shipping Cost" "add(+$149)"|-||-|||-||MAZDA-MIATA-2DR-INVADER-SIDE-SKIRTS-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata Duraflex Works Side Skirts Rocker Panels 1990-1997|,|114942|,|445.00|,|339.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Duraflex Works Side Skirts Rocker Panels 1990-1997
1990-1997 Mazda Miata Duraflex Works Side Skirts Rocker Panels - 2 Piece
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$149)"|-||-|||-||106589|,|NAEXBOST|,|Mazda Miata Duraflex Works Wing Trunk Lid Spoiler - 1 Piece 1990-1997|,|114943|,|315.00|,|242.00|,||,||,||,||,||,||,|Mazda Miata Duraflex Works Wing Trunk Lid Spoiler - 1 Piece 1990-1997
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Material : FRP (Fiberglass Reinforced Plastics)
|,|||-||114712|,|NEW|,|Mazda Miata Duraflex X Sport Side Skirts Rocker Panels - 2 Piece 2006-2015|,|114712|,|795.00|,|668.00|,||,||,||,||,||,||,|Mazda Miata Duraflex X Sport Side Skirts Rocker Panels - 2 Piece 2006-2015
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Modified Aerodynamics
Reduced damage rate up to 75%
|,|"Shipping & Handling" "add(+$145)"|-||-|||-||MAENGASET|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Engine Gasket Set 1990-2018|,|903-201|,|382.25|,|259.02|,||,||,|0.000 |,||,|sghs|,||,|Mazda Miata Engine Gasket Set 1990-2018
When it comes time to change your cylinder head gasket, ordering one part number and getting everything you need at once makes the job so much simpler. These kits contain pretty much everything you'll need while doing this job.
|,|"Select Year" "Select Here" "1991-1993" "1994-1997 add(+$25)" "1999-2003 Manual add(+$45)" "1999-2003 Automatic add(+$45)" "2006-2008 add(+$45)" "2009-2015 add(+$35)" "2016-2018 add(+$85)"|-||-|||-||GARAGE-STAR-COMPETE-ENGINE-BAY-BOLT-KIT1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Engine Timing Cover Bolt Dress Up Kit 1990-2005|,|NAB-7148|,|39.00|,|29.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Engine Timing Cover Bolt Dress Up Kit 1990-2005
Stainless Steel. Attractive Metric hex socket design complements the appearance of your engine compartment. Stronger than factory bolts that sometimes snap when removing. Resistant to corrosion. These bolts are an exact fit in length for each Timing cover.
Hex Socket, Marine grade stainless steel cam cover bolt set. Kit includes:
• 3 Short Bolts for Waterpump pulley
• 5 Long Bolts for Timing Covers
• 3 Medium Bolts for Timing Covers
|,|||-||16339|,|19MAMIEXGAAN|,|Mazda Miata Exhaust System Gasket Multi-Use, Catalytic Converter Gasket 1990-1997|,|16339|,|15.99|,|13.55|,||,||,||,||,||,||,|Mazda Miata Exhaust System Gasket Multi-Use 1990-1997
1990-93 Miata:
1) Catalytic converter to connecting pipe. This gasket can be used on the outlet of the catalytic converter between the either the Mazda OE exhaust system, or the Racing Beat connecting pipe section.
2) Connecting pipe to muffler. This gasket can be used between the Racing Beat connecting pipe section (both Sport and Power Pulse versions) and the Racing Beat muffler.
1994-97 Miata:
1) Racing Beat header outlet to Mazda OE catalytic converter inlet.
2) Catalytic converter to connecting pipe. This gasket can be used on the outlet of the catalytic converter between the either the Mazda OE exhaust system, or the Racing Beat connecting pipe section.
3) Connecting pipe to muffler. This gasket can be used between the Racing Beat connecting pipe section (both Sport and Power Pulse versions) and the Racing Beat muffler.
|,|||-||NAEXLI|,||,|MAZDA MIATA EXTERIOR LIGHTING 1990-1997 |,||,||,||,||,||,||,||,||,||,|
|,|||-||NAEXVIALL|,||,|MAZDA MIATA EXTERIOR VIEW ALL 1990-1997 |,||,||,||,||,||,||,||,||,||,|
|,|||-||MAMIEZ|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata EZcarlift™|,|EZ-CARLIFT|,|2,199.99|,|1,899.95|,||,||,|200.000 |,||,||,||,|EZcarlift™ is the new standard for what a home garage car lift is all about!
* STRONG...Lifts Up To 4,400 Pounds
* FAST...Raise To 26" In Under 140 Seconds
* SAFE...Superb Stability At All Heights
* ACCESS...Unobstructed From All Sides
* EASY...Powered By Standard Corded Electric Drill
* PORTABLE...Take Anywhere. Fits In Your Car trunk.
What is EZcarlift?
EZcarlift is the new standard of what a home garage car lift is all about - it's strong, easy to use, safe, convenient, compact, easy to store, portable, and affordable. It was especially developed with the home mechanic in mind - classic car enthusiast, the antique or vintage car hobbyist, the weekend race track warrior, and the "boy with all his toys" (bikes, ATVs, etc.). Powered by an electric hand drill, this free-standing low profile lift will raise your 4,400 lbs. vehicle from 4" up to 26" high in less than 150 seconds to give you plenty of comfortable open work space and access. At its maximum height, the lift's open design creates unobstructed access to the car from all four sides.
With its optional accessories and all its versatility the EZcarlift becomes a One-For-All tool for your garage or shop.
Lifting Mechanism
The lift only reqires a min 6 amp corded electric drill (dual speed drill is recommended). The lifting mechanism is all mechanical.
Cross Spacers
There are 5 sizes of Cross Spacers available in increments of 12 inches. The lift will accommodate cars with frames or unibody frames from 14" to 74" inches wide. The lift includes one Cross Spacer as per your need. Please select below. Additional Cross Spacers to accommodate different vehicles are optional. Please see related products below to order any additional spacers.
Optional Moving Castors
The optional 6" heavy duty moving castors will allow the vehicle to be easily moved around the garge work area while on the lift. This is perfect for long term projects where the vehicle has to be off the ground. While you are waiting for parts or for time to do the work, you can move the vehicle to the side and free up the space in your garage. A set consists of four 6" non-marring Poly Eurethane casters - two (2) with brakes and (2) with 90 degree (quarter turn) lock. the 1/4 turn locks allow a controled move of your vehicle. For this option please select below.
|,|"Select Optional 6 inch Casters (set of 4) + hardware" "No Thanks" "Yes, add(+$285.00)"|-||-|"Freight Cost" "add(+$189)"|-||-|||-||MAMIEZADCRSP|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata EZcarlift™ Additional Cross Spacers|,|EZ-SPACERSBARS|,|139.99|,|119.95|,||,||,|10.000 |,||,||,||,|Mazda Miata EZcarlift™ Additional Cross Spacers
There are 5 sizes of Cross Spacers available in increments of 12 inches. the lift will accommodate cars with frames or unibody frames from 14" to 74" inches wide. The lift includes one Cross Spacer as per your need but you can purchase additional Cross Spacers if you have a multitude of different size cars that you need to lift. Please select size and quantity below.
*Note-picture on top left shows several complete car lifts stacked on top on one another with different sized cross spacers.
|,|"Please Select Spacer Size" "14 to 26 inch xm24" "26 to 38 inch xm40" "38 to 50 inch xm52" "50 to 62 inch xm64" "62 to 74 inch xm76"|-||-|||-||MAMIEZOPMOCA|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata EZcarlift™ Optional Moving Casters|,|EZ-CASTERS|,|289.99|,|259.95|,||,||,|15.000 |,||,||,||,|Mazda Miata EZcarlift™ Optional Moving Casters
EZcarlift’s optional casters will allow the vehicle to be moved around the work area while on the lift. This is perfect for long term projects where the vehicle has to be off the ground. While you are waiting for parts or for time to do the work, you can move the vehicle to the side and free up the space in your garage. Or you can move the project vehicle from the storage place to the work area. It is also advantages when you are seasonably storing your vehicle. Your vehicle will be off the ground and can be placed to the side of the garage (storage area) freeing up additional space. Or you can use it to free up more garage space for everyday use, (where you can bring your weekend fun driver out for the weekend.)
Attaching the caster is very easy. Just raise the EZcarlift to about 18 inches of the ground, insert the Quick Release Detent Ring Pin with the Dolly Arm in the lifts leg and lower the lift until the legs are off the ground.
The 4-position Swivel locks allow precise moving (steering) of the vehicle while on the lift all by your self (no need to share your precious beer supplies with your buddies). Once finding the new location lock the wheel brakes and enjoy!
|,|||-||MAZDA-MIATA-FACTORY-STYLE-LIP-SPOILER-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata Factory Style Spoiler 1990-1997|,|890094|,|285.00|,|229.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Factory Style Spoiler 1990-1997
1990-1997 Mazda Miata Factory Style Spoiler. A pioneer in polyurethane bodykit manufacturing and design. Parts with part numbers that begin with the prefix 89 are made out of durable, flexible polyurethane. While parts with part numbers that begin with the prefix 59 or 49 are made out of multi-layer fiberglass. Wings West parts are made in USA. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description.
Intended for OFF ROAD use only.
|,|"Drop-Ship fee" "add(+$25)"|-||-|||-||FACTORY-STYLE-TOP-OF-DOOR-WEATHER-STRIPPING-1990-2005-SET-OF-2-LEFT-AND-RIGHT|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Factory Style Top of Door Weather Stripping 1990-2005 (Set of 2 Left and Right) - Sale!|,|NAB-7422|,|199.98|,|169.90|,||,||,|0.000 |,||,||,||,|Mazda Miata Factory Style Top of Door Weather Stripping 1990-2005
This is the molding that goes across the top of the door, also known as the beltline molding.
These long lasting upper door moldings are being sold unbeatable price!
This Price is for the PAIR!
These molding are situated on top of the door and act as seal between window and door. The original parts get weathered and unsightly over just a few years.
This set is for left (Driver) and right (Passenger) and fits all MK1, NA, MK2, NB, and MK2.5, NB models.
|,|||-||MAG-FRONT-CAT-COVERT-NB|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Federal Front Catalytic Converter by MagnaFlow 1999-2005|,|MAG-51992|,|799.99|,|725.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Front Catalytic Converter by MagnaFlow 1999-2005
Note: Not For Sale Or Use In The State Of California.
49 State Converter.
Note: Will NOT work for the 2004-2005 Turbo MazdaSpeed Miata
*Gasket Included
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
|,|||-||MAG-FRONT-CAT-NC-AT|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Federal Front Catalytic Converter by Magnaflow 2006-2009 AT|,|MAG-51866|,|645.00|,|557.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Federal Front Catalytic Converter by Magnaflow 2006-2009 AT
Note: Automatic Transmission Only
*Not California CARB approved
*Not Sold To CA Address
Direct Fit Catalytic Converter 49 State EPA Compliant
Stainless Steel Construction
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
|,|||-||MAG-FRONT-CAT-NC-MT|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Federal Front Catalytic Converter by Magnaflow 2006-2009 MT|,|MAG-49919|,|653.00|,|580.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Federal Front Catalytic Converter by Magnaflow 2006-2009 MT
Note: Manual Transmission Only
*Not California CARB approved
Direct Fit Catalytic Converter 49 State
EPA Compliant
Stainless Steel Construction
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
|,|||-||MAG-REAR-CAT-NC|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Federal Rear Catalytic Converter by Magnaflow 2006-2009|,|MAG-21-286|,|740.00|,|660.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Rear Catalytic Converter by Magnaflow 2006-2009
*Not California CARB approved
*Not Sold To CA Address
Direct Fit Catalytic Converter 49 State EPA Compliant
Stainless Steel Construction
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
|,|"Select Year" "Select Here" "2003-2005" "2006-2009"|-||-|"Shipping Cost" "add(+$79)"|-||-|||-||FENDER-FLARES|,||,|Mazda Miata Fender Flares ND 2015-2016|,|CM-FF1-ND|,|369.95|,|288.05|,||,||,||,||,||,||,|Mazda Miata Fender Flares ND 2015-2016
These fender flares fits perfectly on your existing fenders. Made with high quality carbon fiber/carbon kevlar or fiberglass, they are perfect for people willing to run wider wheels (+35MM all around).
They also give a unique style to your Roadster: Wider, meaner, more agressive. We attached a lot of importance to the fitment of this piece so we can ensure you a really good fit. No DIY, trimming required!!! Only sanding, painting and fitting!
Specifications for the carbon fiber version:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
– Weight: 0.4kg/side for fiberglass and 0.3 kg/side for carbon fiber
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price (price is for a set of 4).
*Availability: 6-8 weeks production time
|,|"Select Option" "Fiberglass" "Carbon Fiber add(+$245.00)" "Carbon Kevlar add(+$275.00)"|-||-|"Shipping Cost" "add(+$59)|-||-|||-||MAZDA-MIATA-FIBERGLASS-FENDER-FLARES-1990-1997|,||,|Mazda Miata Fiberglass Fender Flares 1990-1997|,|CMCF58-FIBERGLASS|,|299.99|,|264.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Fiberglass Fender Flares 1990-1997
These fender flares fits perfectly on your existing fenders. Made with high quality fiberglass, they are perfect for people willing to run wider wheels.
They also give a unique style to your Mazda Miata: Wider, meaner and more aggressive look. We attached a lot of importance to the fitment of this piece so we can ensure you a really good fit. No DIY, trimming, cutting required!!! Only sanding, painting and fitting!
|,|"Shipping Cost" "add(+$59)"|-||-|||-||DG-FENDER-FLARES2-NC|,|20MIMIEXPA|,|Mazda Miata Fiberglass Fender Flares 2006-2014|,|EX-113825|,|450.00|,|389.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Fiberglass Fender Flares 2006-2014
-Hand laid, high quality 6 oz. fiberglass
-Signature black finish
-High quality weather resistant aluminum mesh grille (where applicable)
-Proprietary polymer blend for maximum flexibility
-Increased durability and longer service life
-Modified Aerodynamics
-Reduced damage rate up to 75%
|,|||-||MAZDA-MIATA-FIBERGLASS-RACING-HARDTOP-1990-1997|,|NAEXVIALL|,|Mazda Miata Fiberglass Racing Hardtop 1990-1997 - Sale! |,|NA-50-67-7110|,|2,699.95|,|1,840.00|,||,||,|0.000 |,||,||,||,| Mazda Miata Fiberglass Racing Hardtop 1990-1997
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
Fiberglass Hardtop from DG Motorsports.
- Extra light weight for racing (about 18 pounds)
- Includes rear non-glass shatterproof full size window.
- Includes front, side and rear mounting brackets
- Finished in black gelcoat, ready to prep and paint
- Superior fit, top quality
This hardtop is designed for racing and comes without side window seals and rear deck seals.
|,|"Side Window (L/R) and Rear Deck Seals" "Select Here" "No" "Yes add(+$245)"|-||-|"Freight Shipping Cost" "add(+419)"|-||-|||-||MAZDA-MIATA-FIBERGLASS-RACING-HARDTOP-1999-2005|,|SHOP-BY-SALE|,|Mazda Miata Fiberglass Racing Hardtop 1999-2005|,|NB-50-67-7110|,|2,699.95|,|1,840.00|,||,||,|0.000 |,||,||,||,| Mazda Miata Fiberglass Racing Hardtop 1999-2005
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
Fiberglass Hardtop from DG Motorsports.
- Extra light weight for racing (18 pounds)
- Includes rear non-glass shatterproof window - NEW! NOW FULL SIZE WINDOW!
- NEW! Includes front, side and rear mounting brackets
- Finished in black gelcoat, ready to prep and paint
- Superior fit, top quality
This hardtop is designed for racing and comes without side window seals and rear deck seals.
|,|"Side Window (L/R) and Rear Deck Seals for Hardtop" "Select Here" "No" "Yes add(+$245)"|-||-|"Freight Shipping Cost" "add(+$419)"|-||-|||-||MAZDA-MIATA-FIBERGLASS-STREET-HARDTOP-1990-1997-|,|SHOP-BY-SALE|,|Mazda Miata Fiberglass Street Hardtop 1990-1997 - Sale! |,|NA_50-67-7200|,|2,699.99|,|1,840.00|,||,||,||,||,||,||,|Mazda Miata Fiberglass STREET Hardtop 1990-1997
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
*Additional shipping charges may apply outside of 48 contiguous states
Mazda Miata Fiberglass STREET Hardtop 1990-1997.
- Includes rear non-glass MOLDED, FULL SIZE window
- Includes front, side and rear mounting brackets
- Includes side window seals and rear deck seals
- Finished in black gelcoat, ready to prep and paint (we recommend sending it to a body shop for the best outcome)
- Superior fit, top quality
NOTE: This model is called a "street" model because it comes with weatherproofing seals and a molded rear window. It is not, however, a factory hardtop. First of all, it weighs less than half of a factory top - this makes it super easy to put on and take off, but does not keep out the road noise quite as well as one twice its weight. The mounting brackets are custom made for the top, and the window seals, although effective, are not molded to the window like those in a factory top. The molded rear window looks great and is weather-proof, however it is not glass, and does not have a defrosting option. Bottom line - this is a very nice top, easy to install, and looks great - but it is not a factory top, and will not provide exactly the same the comfort/noise reduction that a factory top will.
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||MAZDA-MIATA-FIBERGLASS-STREET-HARDTOP-199-2005|,|SHOP-BY-SALE|,|Mazda Miata Fiberglass Street Hardtop 1999-2005 - Sale! |,|NB-50-67-7200|,|2,699.02|,|1,840.00|,||,||,||,||,||,||,|Mazda Miata Fiberglass Street Hardtop 1999-2005
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
*Additional shipping charges may apply outside of 48 contiguous states
Mazda Miata Fiberglass STREET Hardtop 1999-2005.
- Includes rear non-glass MOLDED, FULL SIZE window
- Includes front, side and rear mounting brackets
- Includes side window seals and rear deck seals
- Finished in black gelcoat, ready to prep and paint (we recommend sending it to a body shop for the best outcome)
- Superior fit, top quality
NOTE: This model is called a "street" model because it comes with weatherproofing seals and a molded rear window. It is not, however, a factory hardtop. First of all, it weighs less than half of a factory top - this makes it super easy to put on and take off, but does not keep out the road noise quite as well as one twice its weight. The mounting brackets are custom made for the top, and the window seals, although effective, are not molded to the window like those in a factory top. The molded rear window looks great and is weather-proof, however it is not glass, and does not have a defrosting option. Bottom line - this is a very nice top, easy to install, and looks great - but it is not a factory top, and will not provide exactly the same the comfort/noise reduction that a factory top will.
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||FRDESTTOBR19|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Freedom Design Front Shock Tower Brace 1990-2005|,|301-302|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Freedom Design Front Shock Tower Brace 1990-2005
FITS ALL YEARS THROUGH 2005!
Our Freedom Design Strut Tower brace will do wonders to stiffen up the front of your Miata. This is simply a different design from our GoMiata Strut Tower Brace, however this one fits up to the 2005 Miata.
The Freedom Design strut tower brace attaches easily in about 10 minutes using your existing strut tower bolts. No drilling is necessary! It provides substantially more rigidity while cornering. The Freedom Design tower brace will greatly improve the tightness in the front of your Miata while also making steering response feel much more crisp.
The Mazda Miata Freedom Design Front Shock Tower Brace has a polished billet-look; our strut braces are easy to install and improve handling by stiffening your chassis. Your chassis requires this stiffening when you increase your tire and/or wheel size or aggressively drive your car. The stiffer chassis improves steering, improves weight transfer and maximizes handling. Each strut brace is manufactured from forged aluminum, mandrel bent, and polished to a high luster to reduce internal stress and improve its look in your engine compartment.
All fasteners are plated for corrosion resistance. Each mounting plate is manufactured from steel, precision machined, corrosion treated and powder coated with our FREEDOM DESIGN red finish for long life and excellent looks.
Fits models with or without cruise control, but does not fit models with ABS. Not compatible with Racing Beat Intake. DOES work with AEM Intake.
|,|||-||CM-CN1-ND|,||,|Mazda Miata Front Canards ND 2016|,|CM-CN1-ND|,|259.99|,|220.00|,||,||,||,||,||,||,|Mazda Miata Front Canards ND 2016
Those lightweight carbon fiber canards will direct the airflow above the wheels and give you a better aero. Rear canards also available in our shop soon!
Perfect fitment on OEM bumper. 3M double side adhesive supplied but we recommend to add rivets/screws for maximum strength.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum BAG
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Select Option" "Select Here" "Fiberglass" "Carbon Fiber add(+$95.00)" "Carbon Kevlar add(+$105.00)"|-||-|||-||11-3105R|,|19MAMISUANDS5|,|Mazda Miata FRONT CONTROL ARM BUSHING SET 1990-2005|,|11-3105R-G|,|149.05|,|129.95|,||,||,||,||,||,||,|Mazda Miata FRONT CONTROL ARM BUSHING SET 1990-2005
If your Mazda Miata's control arm bushings have worn out you are probably dealing with a lot of annoying clunking, a loss of handling, and constant misalignment. The OE control arm bushings on your Miata are made of soft rubber, allowing them to absorb a lot of the vibrations from the road. The drawback of this softness is that the bushings are left prone to stretching, cracking, and eventually rotting away. There is some good news for you though, DST has just the part you need!
This is Energy Suspension's 11.3105, a HyperFlex polyurethane set of replacement bushings for your front control arm. Designed specifically for the 1990-2005 Mazda Miata, the 11.3105 offers increased responsiveness and a better "feel" for the road. With Energy Suspension's HyperFlex polyurethane your NVH might increase slightly, but the dramatic increase in durability and longevity are well worth it. If you plan on racing the NVH can even be helpful, giving you an even clearer feel for what your roadster can handle.
To help with installation Energy Suspension eliminated the need for a press by making their control arm bushings as two half-bushings with a metal sleeve. Just insert each half bushing on each side of the control arm, then slip the sleeve through and, using your OE bolts, finish the install. Energy Suspension designed the sleeves to match your OE bolt size, allowing you to re-use the bolts to save you even more money! If you also need to replace your rear control arm bushings check out Energy Suspension's 11.3106! Both the 11.3105 and 11.3106 are readily stocked here in our Stephenville warehouse, prepared to ship out the day you order them!
|,|"Select Color" "Select Here" "RED" "BLACK add(+$10)"|-||-|||-||NACA-HEAD-LAMP-COVER-SET-MIATA-1990-1997-I-L-MOTORSPORT|,|NAEXLI|,|Mazda Miata FRP Fiber Glass Vented Headlight Cover Set 1990-1997 |,|NA1-4052|,|249.95|,|198.45|,||,||,||,||,||,||,|Mazda Miata Vented Headlight Cover Set 1990-1997
The NACA pop up headlamp made cover replaces the original one. The covers has OEM like fittings and can be installed on the OEM brackets. The covers are ready for paint with a gelcoat finish (will need a little work). This part is supplied with TÜV certificate.
Please Note: This part only fits on the OEM MK1 headlamps, the cover will not fit on our low profile kits or other custom made headlamps !!!
As with every part that has to be painted, we recommend to firstly check the fit of the part before proceeding.
Please Note: Fiberglass gell coat may be a different color than photo.
|,|"SELECT VENT SIDE" "SELECT HERE" "Only LHS Vented"|-||-|||-||GEMAMIOEMFUF|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Fuel Filter 1999-2005|,|733538|,|36.98|,|19.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Fuel Filter
Don't ignore this important maintenance item! A clean fuel filter is important to get proper fuel delivery to your Miata's engine. You should replace your fuel filter every 30,000 miles.
|,|||-||MAZDA-MIATA-FUEL-PUMP--1990-1993-|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Fuel Pump 1990-1997|,|Fuel-Pump-9500118|,|399.99|,|249.95|,||,||,||,||,||,||,|Mazda Miata Fuel Pump 1990-1997
|,|||-||NA75-60-960A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Fuel Pump, Gauge Sending Unit, Hanger Unit Sender Assembly 1994-1997|,|na75-60-960a|,|298.55|,|259.95|,||,||,||,||,||,||,|Mazda Miata Fuel Pump, Gauge Sending Unit, Hanger Unit Sender Assembly 1994-1997
#3, 11 on the Diagram
|,|||-||CAMIBRPA|,|19MAMIBRROPA1|,|Mazda Miata G-Loc Brake Pads 1990-2005|,|MC-G-Loc|,|179.99|,|159.05|,||,||,|0.000 |,||,||,||,|Carbotech Brake Pads
Simply the best brake pad for your Spec Miata! We now carry the full line of G-Loc brake pads. Based on G-Locs reccomendations we offer the R8, R10, and R12 for race applications. The hot setup for most cars at most tracks is the R8 rear pad, and the R10 front pad.
Now available pre-bedded, so you can just put them on and go racing. No more late night trips down the public street outside the race track to bed the brakes. You will still need to get the pad surface and rotor surface to work together, but this can be done on the pace lap. Price is $20.00 per set.
Since the pre-bedded pads are so good, we have decided to primarily stock the pre-beds. For $20.00 it saves you a significant amount of time and in some cases will make your pads last longer because a lot of people do not properly bed their race pads;. If you want a set of pads that are NOT pre-bedded, we can still get them for you just let us know. All prices reflect the 2013 NEW Carbotech prices on a Pre-Bedded pad.
|,|"Select Model" "Select Here" "R8 Rear 1.6L 1990-1993" "R8 Front 1.6L 1990-1993" "R8 Rear 1.8L 1994-2005" "R8 Front 1.8L 1994-2005 add(+$15)" " " "R10 Rear 1.6L 1990-1993" "R10 Front 1.6L 1990-1993 add(+$15)"
"R10 Rear 1.8L 1994-2005 add(+$15)" "R10 Front 1.8L 1994-2005 add(+$25)" " " "R12 Rear 1.6L 1990-1993 add(+$20)" "R12 Front 1.6L 1990-1993 add(+$25)" "R12 Rear 1.8L 1994-2005 add(+$25)" "R12 Front 1.8L 1994-2005 add(+$40)"|-||-|||-||GARAGE-STAR-NB-MIATA-TYPE-I-TRUNK-SPOILER|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Garage Star Type I Trunk Spoiler 1999-2005|,|GS-NBTS-V1|,|320.99|,|299.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Star Type I Trunk Spoiler 1999-2005
The Mazda Miata Garage Star NB trunk spoiler is an american made product out of California. Made from fiberglass, the Garage Star lip spoiler is attached with 3M tape and comes in a while gel coat.
Weight 8 lbs
Dimensions 42 x 812 x 7 in
|,|||-||MAZDA-MIATA-GARAGE-VARY-1006-HOOD-1989-1997|,|NAEXVIALL|,|Mazda Miata Garage Vary 1006 Hood 1989-1997|,|mazda-miata-garage-vary-1006-hood-1989-1997|,|1,898.99|,|1,295.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary 1006 Hood 1989-1997
Replica of the bonnet from the ultra-rare M2-1006 Roadster which was available in very limited quantities. Made in Japan by Garage Vary, this hood has a fantastic look and also increase clearance for engine swaps.Before painting, please make sure the product fits the car properly.
• Made of high quality FRP
• Easy to install
• Rare and looks great
• Only available for NA Miata (1989-1997)
|,|"Application" "Select Application" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Finish" "Select Finish" "FRP"|-||-|"Special Wood Box & Shipping Cost" "add(+$615)"|-||-|||-||GV-1006-TRUNK-NA|,|NAEXVIALL|,|Mazda Miata Garage Vary 1006 Trunk 1990-1997|,|gv-1006-trunk-na|,|850.00|,|795.55|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary 1006 Trunk 1990-1997
*Availability: Ships in 5-10 business days
Replica of the trunk from the famous M2-1006 Roadster which was availably in very limited quantities. Made in Japan by Garage Vary, this trunk has a fantastic look and fits perfectly. Before painting, please make sure the product fits the car properly.
• Made of high quality FRP
• Easy to install
• Rare and looks great
• Only available for NA Miata (1989-1997)
|,|"Year" "1990-1993" "1994-1997"|-||-|"EMS Shipping Cost" "add(+$139)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-AERO-HOOD-1998-2005|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Garage Vary Aero Hood 1998-2005|,|mazda-miata-garage-vary-aero-hood-1998-2005|,|1,194.00|,|894.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Aero Hood 1998-2005
Product made by Garage Vary. Very aggressive hood that offers more airflow to the engine bay.
• Made of high quality FRP (CF optional)
• Improves cooling of engine bay
• Flows really well with the lines of the car
• Lightweight
• Only available for NB Miatas (1998-2005)
|,|"Application" "Select Application" "NB8C-1 (98-00)" "NB8C-2 (01-05)"|-||-|"Finish" "FRP"|-||-|"Shipping Cost" "add(+$399)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-AERO-HOOD-TYPE-1-1989-1997|,|NAEXVIALL|,|Mazda Miata Garage Vary Aero Hood Type-1 1989-1997|,|mazda-miata-garage-vary-aero-hood-type-1-1989-1997|,|1,649.99|,|1,349.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Aero Hood Type-1 1989-1997
Product made by Garage Vary. Very aggressive hood that offers more airflow to the engine bay.
• Made of high quality FRP
• Improves cooling of engine bay
• Flows really well with the lines of the car
• Lightweight
• Only available for NA Miatas (1989-1997)
|,|"Application" "Select Application" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Finish" "FRP"|-||-|"Options" "None" "Rain Guard add(+$75)"|-||-|"Special Wood Box & Shipping Cost" "add(+$615)"|-||-|||-||GV-AERO-MIRRORS-NB|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Garage Vary Aero Mirrors 1999-2005|,|gv-aero-mirrors-nb|,|625.00|,|474.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Aero Mirrors 1999-2005
*Availability: Ships in 5-10 business days
Product from Japan made by Garage Vary. Made of high quality FRP or Carbon Fiber.
• More aerodynamic than OEM mirror
• Stylish and light
• High quality product from Japan
• Available for NB Miata (1998-2005)
|,|"Year" "1999-2000" "2001-2005"|-||-|"Material" "FRP" "Carbon Fiber add(+$325)"|-||-|||-||GV-AERO-MIRRORS-NC|,|20MIMIEXPA|,|Mazda Miata Garage Vary Aero Mirrors 2006-2015|,|gv-aero-mirrors-nc|,|650.00|,|550.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Aero Mirrors 2006-2015
*Availability: Ships in 5-10 business days
Product from Japan made by Garage Vary. Made of high quality FRP or Carbon Fiber.
• More aerodynamic than OEM mirror
• Stylish and light
• High quality product from Japan
• Available for NC Miata (2006+)
|,|"Year" "2006-2008" "2009-2012" "2013-2015"|-||-|"Material" "FRP" "Carbon Fiber add(+$330)"|-||-|||-||GV-CARBON-COWL-COVER|,|NAEXVIALL|,|Mazda Miata Garage Vary Carbon Fiber Cowl Cover 1990-2005|,|gv-carbon-cowl-cover|,|260.00|,|220.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Carbon Fiber Cowl Cover 1990-2005
*Availability: Ships in 5-10 business days
*Item boxed in red in the picture
Product from JAPAN made by Garage Vary from high quality and light CARBON FIBER. Keeps the cold air and does a nice look to the engine bay, useful for the persons using randall type intake.
• High quality product from Japan
• Only available for NA Miata (1989-1997) and NB Miata (1998-2005)
|,|"Year" "1990-1993" "1994-1997" "1999-2000" "2001-2005"|-||-|"EMS Shipping Cost" "add(+$49)"|-||-|||-||MICAFIDOPAFO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata Garage Vary Carbon Fiber Door Panels for 1990-1997|,|GV-CFDP|,|625.99|,|499.95|,||,||,|0.000 |,||,||,||,|Miata Carbon Fiber Door Panels for 1990-1997
*Availability: Ships in 5-10 business day(s)
• Looks great
• Perfect fit
• Lightweight
• ONLY available for NA Miata (1989-1997)
|,|"Select Year" "Select Here" "1990-1993" "1994-1997"|-||-|"Shipping Cost" "add(+$75)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-CARBON-REAR-GARNISH-2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Garage Vary Carbon Rear Garnish 2016+|,|mazda-miata-garage-vary-carbon-rear-garnish-2016|,|419.99|,|314.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Carbon Rear Garnish 2016+
Rear Garnish for the 2016+ ND Miata made by Garage Vary out of Carbon Fiber. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. It's also a great way to hide tire sticking out of fender when running bigger or wider wheels/tires.
• Made from high quality Carbon Fiber
• Looks great
• Perfect fit
• Only available ND (2016+) MX-5 Miata
|,|"Application" "ND (2016-2019)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-EYE-LIDS-1989-2005|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Garage Vary Eye Lids 1989-2005|,|mazda-miata-garage-vary-eye-lids-1989-2005|,|279.99|,|219.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Eye Lids 1989-2005
Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the headlight look more aggressive. Before painting, please make sure the product fits the car properly.
• Perfect fit
• Flows really well with the lines of the car
• Stylish and durable
• Gives a more aggressive look to the NB
• PRICE IS FOR THE PAIR
• Available in FRP
• Only available for NB Miata (1998-2005)
|,|"Application" "Select Application" "NB8C-1 (98-00)" "NB8C-2 (01-05)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-FRONT-LIP-1989-1997|,|NAEXVIALL|,|Mazda Miata Garage Vary Front Lip 1989-1997|,|mazda-miata-garage-vary-front-lip-1989-1997|,|299.99|,|249.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Front Lip 1989-1997
Give your NA Miata (1989-1997) a sporty and modern look with the Garage Vary Front Lip Spoiler. This authentic air dam was designed to match your car’s flowing lines and to improve stability at high speed. It is made of tough urethane that promises durability and flexibility. Easy to install in black with no incisions needed, or ready to paint once it fits perfectly. Before painting, please make sure the product fits the car properly.
• Looks great
• Perfect fit
• Flows well with the lines of the car
• No incisions needed to the body
• ONLY available for NA Miata (1989-1997)
|,|"Application" "Select Application" "NA6CE (89-93)" "NA8C (94-97)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-FRONT-LIP-2006-2012|,|20MIMIEXPA|,|Mazda Miata Garage Vary Front Lip 2006-2012|,|mazda-miata-garage-vary-front-lip-2006-2012|,|639.99|,|375.05|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Front Lip 2006-2012
Product made by Garage Vary. Very aggressive front lip that gives additional downforce to NC vehicles.
• Made of high quality FRP (CF optional for NCEC-2)
• No cutting to the body needed
• Flows really well with the lines of the car
• Lightweight
• Only available for NCEC-1 (06-08) & NCEC-2 (09-12)
|,|"Application" "Select Application" "NCEC-1 (06-08)" "NCEC-2 (09-12)"|-||-|"Finish" "Select Finish" "Urethane (NCEC-1 only)" "FRP (NCEC-2 only) add(+$320)" "Carbon Fiber + FRP (NCEC-2 only) add(+$520)"|-||-|"Shipping Cost" "add(+$175)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-FRONT-LIP-TYPE-1-2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Garage Vary Front Lip Type-1 2015-2019|,|mazda-miata-garage-vary-front-lip-type-1-2016|,|699.99|,|499.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Front Lip Type-1 2015-2019
The Type-1 Front Lip is Garage Vary’s newest design for the ND (2016+) MX-5 Miata. It’s made of flexible urethane so it is made to last for very long and handle being hit on the ground while still keeping price low. Color is flat black and can be painted, but is not necessary.
• Bolt-on installation
• Improves downforce
• Made of Urethane
• Only available for ND (2016+) MX-5 Miata
|,|"Application" "Select Application" "ND (2015+)"|-||-|"Shipping Cost" "add(+$150)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-FRONT-LIP-TYPE-2-2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Garage Vary Front Lip Type-2 2016+|,|mazda-miata-garage-vary-front-lip-type-2-2016|,|699.55|,|549.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Front Lip Type-2 2016+
The Type-2 Front Spoiler is Garage Vary’s newest design for the ND (2016+) MX-5 Miata. It’s available in both FRP and Carbon Fiber (plain & twill) and will improve the look of the car! Color is gloss black or carbon fiber and can be painted, but is not necessary.
• Bolt-on installation
• Improves downforce
• Made of FRP or Carbon Fiber
• Only available for ND (2016+) MX-5 Miata
|,|"Application" "Select Application" "ND (16+)"|-||-|"Finish" "Select Finish" "FRP" "Carbon Fiber (Plain) add(+$300)" "Carbon Fiber (Twill) add(+$450)"|-||-|"Shipping Cost" "add(+$150)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-GLIDE-FRONT-LIP--TYPE-3--2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Garage Vary Glide Front Lip (Type-3) 2016+|,|mazda-miata-garage-vary-glide-front-lip--type-3--2016|,|749.99|,|694.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Glide Front Lip (Type-3) 2016+
The Type-3 Front Lip Spoiler is Garage Vary’s most advanced design for the ND (2016+) MX-5 Miata front downforce system. It’s available high quality FRP and will improve the look of the car as well as provide great downforce due to its integrated canards! Please note that pictured lip is FRP & Carbon Fiber (Prototype) and the shipped part will NOT have Carbon Fiber.
|,|"Application" "ND (16+)"|-||-|"Finish" "Select Here" "FRP" "Carbon Fiber add(+$95)"|-||-|"Shipping Cost" "add(+$295)"|-||-|||-||MAZDA-MIATA-GARAGE-VARY-GLIDE-LIP-SPOILER-2013-2015|,|20MIMIEXPA|,|Mazda Miata Garage Vary Glide Lip Spoiler 2013-2015|,|mazda-miata-garage-vary-glide-lip-spoiler-2013-2015|,|1,049.99|,|875.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Glide Lip Spoiler 2013-2015
Front Lip made by Garage Vary that was track tested and made to improve aerodynamics of the NC3 to the maximum. It comes with an integrated canard to give the most downforce possible to the vehicle.
• Improves aerodynamics
• Integrated front canards
• Looks awesome
• Only available for NC3 MX5s (2013-2015)
|,|"EMS Shipping & Handing" "add(+$195)"|-||-|||-||MAMIGAVAMINO|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata Garage Vary Nostalgic NA DIY Tail Lamp Conversion 1990-1997|,|GV-DIY-Tail-Lights|,|799.99|,|599.99|,||,||,|15.000 |,||,||,||,|Mazda Miata Garage Vary Nostalgic NA DIY Tail Lamp Conversion 1990-1997
The Garage Vary Do-It-Yourself Nostalgic Tail Lights for NA (1990-1997) Miata MX-5 are the solution to the now discontinued Mazda Porter Tail Lights (that came with the original Garage Vary Tail Lights Kit). It requires some wiring and assembly, but it’s nothing too difficult that a non-mechanic can do by itself. The kit keeps the same exterior look as the original kit, but requires some DIY work to install it
Availability: Ships in 5-14 business days
|,|"Application Years" "Select Here" "1990-1993" "1994-1997"|-||-|"Shipping Cost" "add(+$69.99)"|-||-|||-||GARAGE-VARY-REAR-GARNISH|,|NAEXVIALL|,|Mazda Miata Garage Vary Rear Garnish 1990-2005|,|garage-vary-rear-garnish|,|185.99|,|170.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Garage Vary Rear Garnish 1990-2005
Product made by Garage Vary. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. Before painting, please make sure the product fits the car properly.
• Made from high quality FRP
• Looks great
• Perfect fit
• ONLY available for NA Miata (1989-1997) and NB Miata (1998-2005)
|,|"Select Year" "Select Here" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)"|-||-|||-||GARAGE-VARY-SIDE-SKIRTS-TYPE-TS|,|NEW|,|Mazda Miata Garage Vary Side Skirts Type-TS 1990-1997|,|garage-vary-side-skirts-type-ts|,|590.00|,|514.00|,||,||,||,||,||,||,|Mazda Miata Garage Vary Side Skirts Type-TS 1990-1997
Side steps made by Garage Vary to give a very aggressive side look to the NA (1989-1997) MX-5 Miata. It'll make the side look lower as well as improve aerodynamics of the vehicle. It has a unique floating look that will sure make heads turn!
|,|"Select Year" "Select Here" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Freight Oversized Item Shipping" "add(+$175)"|-||-|||-||GARAGE-VARY-SIDE-STEPS|,|NEW|,|Mazda Miata Garage Vary Side Steps 2016+|,|garage-vary-side-steps|,|699.00|,|549.95|,||,||,||,||,||,||,|Mazda Miata Garage Vary Side Steps 2016+
Side skirts made in Japan by Garage Vary for the ND (2016+) MX-5 Miata. The curved look at the end of it makes it a very unique piece and will flow well with the aggressive look of the fourth generation MX-5!
• Nice aggressive look
• Easy to install
• Available in high quality FRP
• Only available for ND (2016+) MX-5 Miata
|,|"Oversized Item Drop Shipping" "add(+$175)"|-||-|||-||CM-GC1-ND|,||,|Mazda Miata Gas Lid Cover 2016+|,|CM-GC1-ND|,|65.90|,|55.00|,||,||,||,||,||,||,|Mazda Miata Gas Lid Cover 2016+
This lightweight carbon fiber gas lid cover sticks on your existing cover for a racing style.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
– Lightweight, only 20 grams
3M double side adhesive supplied with each piece.
*Availability: 30 - 40 days production time
|,|"Select Option" "Select Here" "Fiberglass" "Carbon Fiber Add(+$45)" "Carbon Kevlar Add(+$55)"|-||-|||-||GASKITCOM94|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Gasket Complete Kit 1994-1997|,|195-402|,|39.99|,|35.95|,||,||,|0.000 |,||,||,||,|Complete exhaust system gasket packages are available for your Miata. The kit for the 1994-97 Miata (1800cc engine) includes (A) header/exhaust manifold gasket, Qty 1, (B) Catalytic Converter Gaskets, Qty (2), (C) Connecting Pipe to Muffler Canister Gasket, Qty (1).
|,|||-||MAZDA-MIATA-GOODRIDGE-STAINLESS-STEEL-COATED-BRAKE-LINES-FOR-1990-2005|,|19MAMIBRROVI1|,|Mazda Miata Goodridge Stainless Steel (Coated) Brake Lines for 1990-2005|,|GRI25001|,|270.56|,|215.89|,||,||,|0.000 |,||,||,||,|Mazda Miata Goodridge Stainless Steel (Coated) Brake Lines for 1990-2005
DETAILS
Brake lines are an important upgrade for any vehicle. As brake fluid gets hot from driving, heat and pressure expand your stock rubber brake lines, resulting in a spongy response at the brake pedals and degrading braking performance.
The Goodridge Stainless Steel Brake Lines improve braking performance as well as eliminating the soft brake pedal feeling. The braided stainless steel brake lines can tolerate higher heat and pressure, minimizing any brake line expansion. Upgrading your stock rubber brake lines with the Goodridge Stainless Steel Brake line provides both performance and safety.
Goodridge brake lines are direct bolt-on replacements. Each Goodridge Stainless Steel Brake Line is constructed from high quality PTFE inner with a stainless steel outer braid. They are also coated to allow superior resistance against abrasion and corrosion for duarability.
Goodridge Stainless Steel Brake Line Kit Product Features:
- High quality PTFE (polytetrafluoroethylene) inner hose construction
- Stainless steel outer braid
- Superior resistance to abrasion and corrosion
- Improves braking efficiency
- Eliminates spongy brake pedal feeling
- Provides performance and safety
Reference: Goodridge brake lines, Goodridge stainless steel brake lines, Good ridge brake lines, Good ridge stainless steel brake lines, Goodridge SS brake line, Goodridge brake line kits, Goodridge stainless steel brake line kits
Number of Lines: 4
Application: Goodridge Stainless Steel Brake Line Kit Mazda Miata 1990-2005
Brake Line Material: Braided Stainless Steel
|,|||-||CM-TS8-ND|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata GT Wing ND 2015-2019+|,|CM-TS8-ND|,|360.95|,|239.00|,||,||,||,||,||,||,|GT Wing ND 2015-2019+
This beautiful GT wing gives your car an amazing racing look. It just has the perfect height and design to bring your car to the next level.
– 45 degree weaving
– High grade 3M double side adhesive supplied with each spoiler but we advise you to drill it on the trunk (we fitted on our OEM trunk on those pictures and it performs very well).
This item is considered as bulky by the express companies so it can take more time to be delivered to you.
|,|"Select Option" "Fiberglass" "Carbon Fiber add(+$150)" "Carbon Kevlar add(+$180)"|-||-|"Shipping Cost" "add(+$85)|-||-|||-||MAMIGTPVFRLI|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata GTP V Front Lip Spoiler 1990-1997 - SALE!!!|,|CAD-F734|,|325.99|,|299.99|,||,||,|5.000 |,||,||,||,|Mazda Miata GTP V Front Lip Spoiler
Quality Fiberglass
For Mazda MX-5 Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||MAZDA-MIATA-HARD-DOG-HIDE-AWAY-VERTICAL-RECEIVER-HITCHES-2016-|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Mazda MIata Hard Dog "Hide Away" Vertical Receiver Hitches 2016+ - Sale! |,|HDG-R4H|,|379.99|,|304.95|,||,||,|0.000 |,||,||,||,|Mazda MIata Hard Dog "Hide Away" Vertical Receiver Hitches 2016+
Hard Dog Miata / MX-5 receiver hitches are suitable for tire carriers, bike racks and small trailers.
Our superior mounting systems provide the strongest attachment point available.
Features include:
* Class 1 Standard 1-1/4" receiver
* Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than a Miata / MX-5 should haul)
* Black Powdercoat finish
* Hitch pin and required mounting hardware included
* Safety chain anchors
|,|"Shipping cost" "add(+$109)"|-||-|||-||MAZDA-MIATA-HARD-TOP-BRACKETS-1990-2005|,||,|Mazda Miata Hard Top Brackets - 1990-2005|,|AWR-04-5997|,|99.99|,|51.90|,||,||,|0.000 |,||,||,||,|Mazda Miata Hard Top Brackets - 1990-2005
Product Description
Hard top brackets provide a nice, ready made bracket to fix the hard top on a Miata to the body as per SCCA rules.
Comes with brackets and all necessary screws. Uses factory mounting holes to be used without damage to vehicle. Can be used on all 1990-2005 Mazda Miatas
Weight: 2.00 Lbs
NOTE: For Race Use Only
|,|||-||903-895|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1999-2005|,|Mazda Miata Hard Top Brackets by Jass Performance 1990-2005|,|903-895|,|75.55|,|64.90|,||,||,||,||,||,||,|Mazda Miata Hard Top Brackets by Jass Performance 1990-2005
Stop worrying about your hardtop's security. Direct fit brackets are substantial and feature optional security fastener option. Cut from 4 mm thick steel, pre-bent and powder coated. Front pair for windshield header, rear pair for B pillar. Fasteners do one set of brackets, two needed for full hardtop. Fastener Set for Jass Hard Top Brackets available seperately.
|,|"Select Location" "Select Here" "Front Pair (903-895)" "Rear Pair (903-896)" "Front & Rear Both add(+$59)"|-||-|||-||CARBON-HARDTOP-HEADLINER|,||,|Mazda Miata Hardtop Custom Headliner Interior 1990-2005|,|CMCF53|,|260.00|,|199.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Hardtop Custom Headliner Interior 1990-2005
*Availability: 6-8 weeks production time
This hardtop headliner fits inside your hardtop in your Miata. It will give a vintage racing look to your interior but also reduce the noise getting in the passenger compartment.
We would like to offer the highest level of customization as possible:
- Large choice of materials: suede leather, faux leather, real leather (quilted and normal design available)
- Large choice of stitching colors: black, white, blue, red, green etc... (Please state stitching color in comment box at check out)
Please send us an email info@gomiata.com with what you need and we will get back to you ASAP.
Please check the pictures attached for the material colors.
|,|"Material" "Select Leather" "Faux Leather" "Premium Leather add(+$75)" "Suede Leather add(+$20)"|-||-|"Faux Leather" "Select Color" "C101" "C102" "C103" "C104" "C105" "C106" "D202" "D203" "D204" "D205" "D206" "E301" "E302" "E303" "E304" "E305" "E306"|-||-|"Real Leather" "Select Color" "A1" "A2" "A3" "A4" "A5" "A6" "A7" "A8" "B1" "B2" "B3" "B4" "B5" "B6"|-||-|"Suede Leather" "Select Color" "F1" "F2" "F3" "F4" "F5"|-||-|"EMS Shipping Cost" "add(+$69.99)"|-||-|||-||MAZDA-MIATA-CARBON-FIBER-HARDTOP-RAIN-RAILS-1999-2005|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Mazda Miata Hardtop Rain Rails by Garage Vary 1990-2015|,|GV-RR|,|209.99|,|165.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Hardtop Rain Rails by Garage Vary 1990-2015
Product Description
Product from JAPAN made by GARAGE VARY. Subtle and stylish touch to the exterior. Makes the hardtop more functional when it rains or after a shower. Before painting, please make sure the product fits the car properly.
Specifications:
• Flows really well with the lines of the car
• Stylish and durable
• You can now take turns with the window opened without being poured by rain from your hardtop
• PRICE IS FOR THE PAIR
• Available in FRP
• Only available for NA Miata (1989-1997), NB Miata (1998-2005) & NC MX5 (2006-2015) with hardtop
|,|"Select Year" "Select Here" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)"|-||-|||-||---HAWK-DTC-60-RACING-BRAKE-PADS---MOTORSPORT-RACE-USE|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Hawk DTC-60 Racing Front Brake Pads - Motorsport Race Use (Normal Suspension 2001-2005) |,|HB149G-505|,|176.95|,|143.45|,||,||,||,||,||,||,|Mazda Miata Hawk DTC-60 Racing Front Brake Pads - Motorsport Race Use (Normal Suspension 2001-2005)
Hawk Performance DTC 60 Compound Features Smooth braking feel with excellent torque and control. Operating Temperature: (500F-1600F) Race Use Only!
* High Temp
* High Torque
* Excellent Torque Control
* Excellent Modulation and Release Characteristics
* NASCAR, Hooters Cup, ARCA, ASA, Super Late Models, Sports Car / GT, Open Wheel / Formula
|,|||-||MAZDA-MIATA-HAWK-HPC-PERFORMANCE-CERAMIC-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata HAWK HPC Performance Front Ceramic Brake Pads 1994-2005|,|HB149Z-505|,|129.30|,|101.45|,||,||,||,||,||,||,|Mazda Miata HAWK HPC Performance Front Ceramic Brake Pads 1994-2005
Hawk Performance introduces a unique ceramic composite formulation specifically developed to meet the ultra-low dust and low noise attributes of Original Equipment ceramic brake pads while maintaining the high friction levels professional brake tuners have grown to expect from Hawk Performance. Hawk Performance Ceramic Brake Pads do not compromise performance and offer a solution to many consumers'' number one complaint: DUST! Performance Ceramic Brake Pads also feature a fade resistant, linear friction profile that allows your ABS brake system to work more effectively.
|,|||-||MAZDA-MIATA----HAWK-HPC-PERFORMANCE-REAR-CERAMIC-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata HAWK HPC Performance Rear Ceramic Brake Pads 1994-2005|,|HB159Z-492|,|116.16|,|101.45|,||,||,||,||,||,||,|Mazda Miata HAWK HPC Performance Rear Ceramic Brake Pads 1994-2005
Hawk Performance introduces a unique ceramic composite formulation specifically developed to meet the ultra-low dust and low noise attributes of Original Equipment ceramic brake pads while maintaining the high friction levels professional brake tuners have grown to expect from Hawk Performance. Hawk Performance Ceramic Brake Pads do not compromise performance and offer a solution to many consumers'' number one complaint: DUST! Performance Ceramic Brake Pads also feature a fade resistant, linear friction profile that allows your ABS brake system to work more effectively.
|,|||-||HAHPSBRPAFRS3|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Hawk HPS Brake Pads - Front Set 2006-2014|,|HAW-HPS7|,|119.99|,|97.50|,||,||,|0.000 |,||,||,||,| HPS - High Performance Street Mazda Miata Brake Pads, Front Set 2006-2014
Superior Stopping Power
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.
|,|||-||HAWK-ROTOR-1-8|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Hawk Performance Sector 27 Brake Rotors 1994-2005|,|HAW-HUS579|,|179.00|,|129.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Hawk Performance Sector 27 Brake Rotors 1994-2005
*Mazda Miata 1.8L 1994-2005 WITHOUT Sport Suspension ONLY
*Priced Per Each Rotor, Enter Qty 2 for Left & Right
Get quiet stops with the all-new Quiet Slot rotors by Hawk Performance. Quiet Slot rotors are engineered specifically for automotive car and truck enthusiasts looking for high performance braking without the noise, dust and reliability issues commonly seen in heavily slotted, dimpled or cross-drilled aftermarket rotors. Some of the key features of the all-new Quiet Slot rotors are the advanced metallurgy, surface finish, and progressive structural and aerodynamic design. The Quiet Slot rotor program also addresses the needs of the automotive installer. The unidirectional vane and slot design eliminates the need to stock left hand and right hand rotors. Hawk Performance has also taken measures to decrease the impact of automotive products on the environment. All Quiet Slot rotors are finished with a GEOMET coating that protects both the internal and external surfaces from rust and corrosion. GEOMET is a proprietary water-based coating dispersion containing metal oxides, metallic zinc and aluminum flakes. The zinc and aluminum platelets align in multiple layers forming a metallic silver-gray coating. Applied as a liquid, the coating becomes totally inorganic after curing at 575-600 degree Fahrenheit.
|,|"Special Handling fee" "add(+$10)"|-||-|||-||HAWK-F-ROTOR-NC|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Hawk Performance Sector 27 Front Brake Rotor 2006-2014|,|HAW-HUS585|,|110.00|,|95.05|,||,||,|0.000 |,||,||,||,|Mazda Miata Hawk Performance Sector 27 Front Brake Rotor 2006-2014
*Priced Per Each Rotor, Enter Qty 2 for Left & Right
Get quiet stops with the all-new Quiet Slot rotors by Hawk Performance. Quiet Slot rotors are engineered specifically for automotive car and truck enthusiasts looking for high performance braking without the noise, dust and reliability issues commonly seen in heavily slotted, dimpled or cross-drilled aftermarket rotors. Some of the key features of the all-new Quiet Slot rotors are the advanced metallurgy, surface finish, and progressive structural and aerodynamic design. The Quiet Slot rotor program also addresses the needs of the automotive installer. The unidirectional vane and slot design eliminates the need to stock left hand and right hand rotors. Hawk Performance has also taken measures to decrease the impact of automotive products on the environment. All Quiet Slot rotors are finished with a GEOMET coating that protects both the internal and external surfaces from rust and corrosion. GEOMET is a proprietary water-based coating dispersion containing metal oxides, metallic zinc and aluminum flakes. The zinc and aluminum platelets align in multiple layers forming a metallic silver-gray coating. Applied as a liquid, the coating becomes totally inorganic after curing at 575-600 degree Fahrenheit.
|,|"Special Handling fee" "add(+$15)"|-||-|||-||NA01-61-B10-AM|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Heater Blower Motor 1990-1997|,|NA01-61-B10|,|199.85|,|132.02|,||,||,||,||,||,||,|Mazda Miata Heater Blower Motor 1990-1997
|,|||-||MAMIHIFLCACO1|,|19MAMIEXSYMU|,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1990-1993|,|MAG-23684|,|371.91|,|320.99|,||,||,|0.000 |,||,||,||,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1990-1993
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
*Does not come with gaskets or hardware.
*Not California CARB approved.
|,|||-||MAMIHIFLCACO2|,|19MAMIEXSYMU|,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1990-1993 CARB LEGAL|,|MAG-3321684|,|1,440.42|,|1,035.00|,||,||,|0.000 |,||,||,||,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1990-1993 CARB LEGAL
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer.
Mazda Miata High Flow Catalytic Converter by MagnaFlow 1990-1993 CARB LEGAL
Each is designed to exact original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry.
MagnaFlow uses Ceramic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
All California State Catalytic converters are CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board and must be used in accordance with this information. In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size.
• Stainless steel construction
• California Emissions compliant design
• Formulated for Gas and Diesel Applications
• Will pass smog is all 50 states
|,|||-||MAMIHIFLCACO3|,|19MAMIEXSYMU|,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1994-1995 CARB LEGAL|,|MAG-3321696|,|1,458.16|,|1,299.00|,||,||,|0.000 |,||,||,||,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1994-1995 CARB LEGAL
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Mazda Miata High Flow Catalytic Converter by MagnaFlow 1994-1995 CARB LEGAL
Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
*Will pass smog is all 50 states.
|,|||-||MAMIHIFLCACO|,|19MAMIEXSYMU|,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1994-1997|,|MAG-23696|,|311.91|,|285.00|,||,||,|0.000 |,||,||,||,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1994-1997
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
*Does not come with gaskets or hardware.
*Not California CARB approved, 49 State approved.
|,|||-||NA2-MAG-CA-CAT|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1996-1997 CARB LEGAL|,|MAG-4481696|,|1,495.23|,|1,355.00|,||,||,|0.000 |,||,||,||,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1996-1997 CARB LEGAL
MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Mazda Miata High Flow Catalytic Converter by MagnaFlow 1996-1997 CARB LEGAL
Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
*California Approved
|,|||-||HIFLCACOBYMA|,|19MAMIEXSYMU1|,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1999-2000 (Automatic)|,|MAG-23771|,|737.35|,|650.00|,||,||,|5.000 |,||,||,||,| High Flow Catalytic Converter by MagnaFlow 1999-2000
MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
*Not California CARB approved.
**Not direct bolt-in, one end requires welding. See Picture Shown
* For Mazda Miata with Automatic Transmission for Year 1999 and 2000
|,|||-||P1068H|,|NAEXGRBRA|,|Mazda Miata High Flow Grille 1990-2005|,|P1068H|,|49.99|,|34.95|,||,||,|0.000 |,||,||,||,|Mazda Miata High Flow Grille 1990-2005
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
This is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and air conditioner radiator from damage due to stones and other road debris.
Our Grilles are made of steel with a durable powdercoated - not painted - finish. This High Flow Grille has 79% open area; the highest on the market, for maximum cooling capability.
Installation is easy. This should have been a factory part; no Miata should be without one.
Specifiy Black or Silver
|,|"Select Year" "Select Here" "1990-1997 (P1068H)" "1999-2000 (P1113H)" "2001-2005 (P1130H)" "2004-+ MazdaSpeed (P1167H) add(+$10)"|-||-|"Select Color" "Select Here" "Silver" "Black"|-||-|||-||P1167H|,|NBGRILLANDBRA|,|Mazda Miata High Flow Grille Mazdaspeed 2004+|,|p1167h|,|59.05|,|43.95|,||,||,||,||,||,||,|Mazda Miata High Flow Grille Mazdaspeed 2004+
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
This is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and air conditioner radiator from damage due to stones and other road debris.
Our Grilles are made of steel with a durable powdercoated - not painted - finish. This High Flow Grille has 79% open area; the highest on the market, for maximum cooling capability.
Installation is easy. This should have been a factory part; no Miata should be without one.
Specifiy Black or Silver
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat"|-||-|||-||MAZDA-MIATA-HOOD-LIFT-KIT--1990-1997|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Hood Lift Kit 1990-2023+|,|CBT-998-314|,|79.99|,|44.95|,||,||,||,||,||,||,|Mazda Miata Hood Lift Kit 1990-2019+
Color - BLACK
Cobalt’s engineers are performance enthusiasts and fellow gear heads, and they knew that this kit has to do more than just lift the hood. To that end they produced a hood lift kit with a number of features not seen in other kits.
Easy Engine Access - Strut mounts near cowl so engine is accessible from the sides without needing to reach around the strut as on other kits. The kit is designed to use this single strut.
Progressive Strut - Once the hood is opened half way the strut gently lifts it to the fully open position. Other kits use inexpensive linear struts that are either too strong or to weak that cause the hood to raise so fast it comes to a shuddering stop at the top stressing all components or requires you to lift the hood all the way open yourself.
One kit is for one hood. The kit includes one strut.
|,|"Select Year" "Select Here" "1990-1997 add(+$25)" "1999-2005 W/O Cruise Control add(+$25)" "1999-2005 With Cruise Control add(+$15)" "2006-2015" "2016-2023+ add(+$48)"|-||-|||-||HPS-PERFORMANCE-SILICONE-HOSES-FOR-1990-2015-MIATA1|,|19MAMIENPEVI|,|Mazda Miata HPS Performance Silicone Heater Hoses 1990-2015|,|HPS-57-1309-heaterhose-black|,|122.99|,|108.95|,||,||,|0.000 |,||,||,||,|Mazda Miata HPS Performance Silicone Heater Hoses 1990-2015
HPS High Temp Reinforced Mazda Miata Silicone Heater Hose Kit is designed to replace Mazda Miata stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit for Miata can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving.
Key Features:
Stay Cool – Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your Miata cooling system by replacing your old brittle hoses now before it’s too late. Perfect for racing or daily driving application.
Direct Fit: HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement on your Mazda Miata, it is not a cheap one size fits all universal hose you get at the local parts store that you have to fight with to install.
Premium Quality: HPS Silicon coolant hose kit for Mazda Miata is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence.
Technical Specifications:
Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C)
Color: Black, Blue and Red
Material: 3-Ply Reinforced High Temp Silicone
100% Stainless Steel Clamps are included for easy installation
Silicone hose is NOT compatible with fuel or oil.
|,|"Choose an Option" "Select Year" "1990-1993 Heater Hoses" "1994-1999 Heater Hoses" "1999-2005 Heater Hoses" "2006-2015 Heater Hoses"|-||-|||-||HPS-PERFORMANCE-SILICONE-HOSES-FOR-1990-2015-MIATA|,|19MAMIENPEVI|,|Mazda Miata HPS Performance Silicone Radiator Hoses 1990-2015|,|HPS-57-1029-Radhose-Black|,|122.99|,|108.99|,||,||,|0.000 |,||,||,||,|Mazda Miata HPS Performance Silicone Radiator Hoses 1990-2015
HPS High Temp Reinforced Mazda Miata Silicone Radiator Hose Kit is designed to replace Mazda Miata stock OEM rubber hoses which can eventually weaken over time, leading to premature failure. With premium quality silicone and race inspired design, this HPS silicon radiator hose kit for Miata can withstand the harsh high temperature and high pressure operating conditions of the engine yet still maintaining peak efficiency during competition or daily driving.
Key Features:
Stay Cool – Old cracked or split radiator hoses are not efficiently cooling your engine which can cause it to overheat leaving you stranded. So maintain your Miata cooling system by replacing your old brittle hoses now before it’s too late. Perfect for racing or daily driving application.
Direct Fit:
HPS silicone radiator hose kit has all the correct bends and curves for a perfect fit replacement on your Mazda Miata, it is not a cheap one size fits all universal hose you get at the local parts store that you have to fight with to install.
Premium Quality:
HPS Silicon coolant hose kit for Mazda Miata is made from multi-ply premium grade silicone and reinforced with high-quality polyester for which reduces the risk of component failure and enables higher temperature and pressure to be maintained with complete confidence.
Technical Specifications:
Temperature Range:- 65 deg. F to + 350 deg. F (177 deg. C)
Color: Black, Blue and Red
Material: 3-Ply Reinforced High Temp Silicone
100% Stainless Steel Clamps are included for easy installation
Silicone hose is NOT compatible with fuel or oil.
|,|"Choose an Option" "Select Year" "1990-1993 Radiator Hoses" "1994-1997 Radiator Hoses" "1999-2005 Radiator Hoses"|-||-|||-||GEMAMIIDAIRC|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Idle Air Control Valve 1994-1997|,|B6BF-20-660|,|813.73|,|629.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Idle Air Control Value (IAC Vaule).
|,|||-||NAB-1557|,|NBACCESSORIES|,|Mazda Miata IL Motorsports Stainless Steel Side Marker Covers 1990-2005|,|NAB-1557|,|49.95|,|35.00|,||,||,||,||,||,||,|Mazda Miata IL Motorsports Stainless Steel Side Marker Covers 1990-2005
MX5 stainless steel side marker covers. Made from stainless steel with a classy polished finish, fits perfectly over the existing markers. Fits all Miata's 1990-2005. This set of 4 is supplied with adhesive tape for an easy installation.
Features
•Durable Polished Finished
•Ready to adhere adhesive
|,|||-||BP4W-13-111|,|19MAMIEXGAAN1|,|Mazda Miata Intake Manifold Gasket 1999-2005|,|BP4W-13-111|,|15.37|,|12.99|,||,||,||,||,||,||,|Mazda Miata Intake Manifold Gasket 1999-2005
|,|||-||MAMIJARAFOFI|,|JACKSONRACING|,|Mazda Miata Jackson Racing Foam Filter Cleaning Kit |,|JRG-901-970|,|24.99|,|19.95|,||,||,|0.000 |,||,||,||,|Keep your Miata MX-5 Foam Air Filter working properly. This kit is designed to clean and oil foam filters.
|,|||-||MIJARASUIDPU|,|19MAMIENPECA1|,|Mazda Miata Jackson Racing Supercharger Idler Pulley 1990-2005|,|JRG-999-161|,|62.99|,|54.55|,||,||,|0.000 |,||,||,||,|Mazda Miata Jackson Racing Supercharger Idler Pulley 1990-2005
Take it up a notch with these high quality Idler pulley. Manufactured from durable, high grade Dupont 800 series nylon with a Dupont/Corning fiberglass fill for added strength, they can handle a dynamic load rating of 1530 lbs. These pulleys use two top quality NSK bearings rated to withstand 24,000 RPM continuous use for 2500 hours. These will be the last idler pulley you should ever need.
NOTE: Quantity two required for the 2.0 inch pully.
|,|"Select Size" "Select Here" "2.0 inch (999-161)" "2.5 inch (999-162) add(+$4.99)"|-||-|||-||JAZZ-TSI-SS|,|NAEXLI|,|Mazda Miata Jass Performance Classic Turn Signal Intakes 1990-1997|,|MOS-903-380-903-381|,|250.00|,|239.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Jass Performance Classic Turn Signal Intakes 1990-1997
Turn Signal Intakes by Jass Performance combine dramatic, stylish looks and purpose-driven engineering. The intake grilles are made from stainless steel and either polished to a high shine or powdercoated black. TSIs bring cooler outside air into the hot engine compartment, to help keep components cool and make a bit more horsepower. The Classic style features an exposed orange turn signal with a bright white LED parking light. The Stealth style has both the turn signal and parking lights hidden behind the grille, and are available with LED or Incandescent turn lights. Sold in pairs, simple plug-n-play installation, all hardware included. 903-387: Stealth/Stainless Stell/LED 903-385: Stealth/Black/LED
* Priced for the pair, Classic Style
Note: NOT for cars with Daytime Running Lights.
|,|"Select Color" "Select Here" "Classic Stainless Steel" "Classic Black Powdercoated add(+$5.00)"|-||-|||-||JASS-SILL-PLATE-NA|,|NAFLOORING|,|Mazda Miata Jass Performance Sill Plates 1990-1997|,|MOS-909-895|,|75.00|,|72.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Jass Performance Sill Plates 1990-1997
Polished stainless steel door sill covers feature a large Roadster script logo. Install with factory screws and 3M double-sided tape.
*Priced for the Pair
|,|||-||JAZZ-TSI-STEALTH|,|NAEXLI|,|Mazda Miata Jass Performance Stealth Turn Signal Intakes 1990-1997|,|MOS-903-386-8|,|260.00|,|249.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Jass Performance Stealth Turn Signal Intakes 1990-1997
Turn Signal Intakes by Jass Performance combine dramatic, stylish looks and purpose-driven engineering. The intake grilles are made from stainless steel and either polished to a high shine or powdercoated black. TSIs bring cooler outside air into the hot engine compartment, to help keep components cool and make a bit more horsepower. The Classic style features an exposed orange turn signal with a bright white LED parking light. The Stealth style has both the turn signal and parking lights hidden behind the grille, and are available with LED or Incandescent turn lights. Sold in pairs, simple plug-n-play installation, all hardware included.
* Priced for the pair
Note: NOT for cars with Daytime Running Lights.
|,|"Color" "Select Finish" "Black Powdercoated" "Stainless Steel"|-||-|"Select Material" "Select Here" "Incandescent Bulbs" "LED Bulbs add(+$15)"|-||-|||-||MAMIJDMBLRET|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata JDM Black Rear Taillights 1990-1997 - Sale!|,|509-338|,|329.99|,|189.95|,||,||,|0.000 |,||,||,||,|Mazda Miata JDM Black Rear Taillights 1990-1997 - Sale!
These Mazda Miata JDM Black Rear Taillights will give your Miata a great look that will truly set it apart.
Try a set on your Miata and you won't be dissapointed. These are the real deal with incredible craftsmanship. Don't settle for cheap imitations.
DOT Approved
Price is for the pair. Easy installation in less than 30 minutes. At this time, they are only available for the 90-97 Miata.
Click on the photo for a larger view
|,|||-||MAZDA-MIATA-JDM-SIDE-SKIRT-AIR-SPLITTERS-DIFFUSERS-1990-1997|,|NAEXBOST|,|Mazda Miata JDM Side Skirt Air Splitters Diffusers 1990-1997 (Set Of 2 Left and Right) - Sale!|,|NA0-4976|,|229.95|,|138.02|,||,||,|0.000 |,||,||,||,|Mazda Miata JDM Side Skirt Air Splitters Diffusers 1990-1997 (Set Of 2 Left and Right)
These Cool looking Miata Air Diffusers fit seamlessly, and are precision made of durable ABS plastic. A handling technique incorporated by more and more high end car makers, the positioning of the skirts combined with the angle of the doors work together to create a unique down force as well as prevent unwanted turbulence from getting under the car.
These Miata splitters attach to the bottom of the rocker panels using the front 2 existing fender bolts holes and self tapping screws the rest of the way. Supplied unfinished in black, the skirts can be painted to match your Miata's rocker guards or body color; all required mounting hardware is included. Regardless of the aerodynamic benefits, installing a set of Side Splitters on your Miata is a real head turning addition.
|,|||-||KG-WORKS-INDEPENDENT-LOOK-CLUSTER-NB-STAINLESS-|,|NBINDA|,|Mazda Miata KG Works Independent Look Cluster NB Stainless 1999-2005|,|NB0-56779|,|365.95|,|345.00|,||,||,||,||,||,||,|Mazda Miata KG Works Independent Look Cluster NB Stainless 1999-2005
Give your Miata that vintage sports car look of legend with the KG Works Independent Look Instrument Panel for 1990-1997 Miata's. KG Works envisioned a complete gauge panel that would look great in any Miata. With seamless 100% plug-and-play installation the Independent Instrument panel is the most sort after and renown Miata accessory in ever made. All KG Works gauge panels are supplied pre-built on a Mazda factory gauge surrounds and is layered with the finest combination of stainless steel, aluminum and hand-lathed materials that comprise a look of true elegance. All KG Works panels for the 90-97 Miata's feature rings, bulb covers, rivets, and everything you need to transform your gauge pod into something unique to behold especially at night. The indicators on these panels are made so that they simply lay over the existing lights and light up the same way without the need for any re-wiring, etc. Instillation on these cluster pieces is a snap with the factory gauge cover reused in a 1999-2005 Miata. The Brushed Stainless version as shown, gives your Miata that true vintage cockpit appearance reminiscent of a fine Italian sports car. The KG Independent Panel is a great addition to any interior chrome or stainless accessories you already have but looks great on its own any stock Miata. Do not for get to select your free Set of Diamond tooled Needle Caps your purchase.
|,|"Free Accessory" "Selected Free Diamond Tool Needle Cap Set of 5"|-||-|||-||KG-WORKS-INDEPENDENT-LOOK-CLUSTER-WAVY-ALUMINUM-NB|,|NBINDA|,|Mazda Miata KG Works Independent Look Cluster Wavy Aluminum NB 1999-2005|,|NB0-8333|,|369.99|,|345.00|,||,||,||,||,||,||,|Mazda Miata KG Works Independent Look Cluster Wavy Aluminum NB 1999-2005
Give your Miata that British sports car look of legend with the KG Works Independent Look Instrument Panel for 1990-1997 Miata's. KG Works envisioned a complete gauge panel that would look great in any Miata. With seamless 100% plug-and-play installation the Independent Instrument panel is the most sort after and renown Miata accessory in ever made. All KG Works gauge panels are supplied pre-built on a Mazda factory gauge surrounds and is layered with the finest combination of stainless steel, aluminum and hand-lathed materials that comprise a look of true elegance. All KG Works panels for the 90-97 Miata's feature rings, bulb covers, rivets, and everything you need to transform your gauge pod into something unique to behold especially at night. The indicators on these panels are made so that they simply lay over the existing lights and light up the same way without the need for any re-wiring, etc. Instillation on these cluster pieces is a snap with the factory gauge cover reused in a 1999-2005 Miata. The Wavy Aluminum version as shown, gives your Miata that true vintage cockpit appearance reminiscent of a fine Italian sports car. The KG Independent Panel is a great addition to any interior chrome or stainless accessories you already have but looks great on its own any stock Miata. Note: this instrument panel features KG Work's latest anti-glaire glass set pre-installed.
|,|||-||KG-WORKSINSTRUMENT-CLUSTER-NA-WOOD-1990-1997|,|NADASHBOARD|,|Mazda Miata KG Works Independent Look Instrument Cluster NA Wood 1990-1997|,|NA0-57734|,|495.00|,|459.95|,||,||,||,||,||,||,|Mazda Miata KG Works Independent Look Instrument Cluster NA Wood 1990-1997
Give your Miata that British sports car look of legend with the KG Works Independent Look Instrument Panel for 1990-1997 Miata's. KG Works envisioned a complete gauge panel that would look great in any Miata. With seamless 100% plug-and-play installation the Independent Instrument panel is the most sort after and renown Miata accessory in ever made. All KG Works gauge panels are supplied pre-built on a Mazda factory gauge surrounds and is layered with the finest combination of stainless steel, aluminum and hand-lathed materials that comprise a look of true elegance. All KG Works panels for the 90-97 Miata's feature rings, bulb covers, rivets, (new anti glare) quartz glass windows and everything you need to transform your gauge pod into something unique to behold especially at night. The indicators on these panels are made so that they simply lay over the existing lights and light up the same way without the need for any re-wiring, etc. Instillation on these cluster pieces is a snap! The Burl Wood version as shown, gives your Miata that true vintage cockpit appearance reminiscent of British roadsters or yore. The KG Independent Panel is a great addition to any interior chrome or stainless accessories you already have but looks great on its own any stock Miata. Note: this instrument panel features KG Work's latest anti-glaire glass set pre-installed.
Features
(note: these do not come with gauge faces, needles or needle caps).The bulbs on these panels are made so that they simply lay over the existing lights when inplace and light up the same way without the need for any re-wiring, etc. Instillation onthese cluster pieces is a snap. Also, we cannot guarantee that this burl will match your existing wood as it varies per depend on the season.
|,|"Free Accessory" "Selected Free Diamond Tool Needle Cap Set of 5"|-||-|||-||KG-WORKS-INDEPENDENT-LOOK-INSTRUMENT-PANEL-ORTHODOX-BLACK|,|NBINDA|,|Mazda Miata KG Works Independent Look Instrument Panel Orthodox Black 1999-2005|,|NB0-5677|,|365.95|,|345.00|,||,||,||,||,||,||,|Mazda Miata KG Works Independent Look Instrument Panel Orthodox Black 1999-2005
Give your Miata that vintage sports car look of legend with the KG Works Independent Look Instrument Panel for the 1999-2005 Miata. KG Works envisioned a complete gauge panel that would look great in any Miata. With seamless 100% plug-and-play installation the Independent Instrument panel is the most sort after and renown Miata accessory in ever made. All KG Works gauge panels are supplied pre-built on a Mazda factory gauge surrounds and is layered with the finest combination of stainless steel, aluminum and hand-lathed materials that comprise a look of true elegance. All KG Works panels for the 90-97 Miata's feature rings, bulb covers, rivets, and everything you need to transform your gauge pod into something unique to behold especially at night. The indicators on these panels are made so that they simply lay over the existing lights and light up the same way without the need for any re-wiring, etc. Instillation on these cluster pieces is a snap with the factory gauge cover reused in a second gen Miata. The Black Satin version as shown, gives your Miata that true vintage cockpit appearance reminiscent of a fine Italian sports car. The KG Independent Panel is a great addition to any interior chrome or stainless accessories you already have but looks great on its own any stock Miata. Receive a free set of Diamond Tool Needle Caps with this item for limited time!
|,|||-||KONI|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Koni Adjustable Shock 1999-2005|,|304-251|,|258.99|,|185.95|,||,||,|0.000 |,||,|sdfgdsfg|,||,|Mazda Miata Koni Adjustable Shock 1999-2005
Konis are an excellent choice of shock absorber for both street and high performance driving applications such as autocross. Our Koni shock absorbers can be a adjusted for stiffness from "soft" which provides a near stock ride quality to "firm" which is exactly that. You can also adjust them to anywhere in between.
KONI street shocks carry a lifetime warranty to the original purchaser for as long as you own the vehicle.
Koni 8041 1251Sport: Front
Koni 8041 1252Sport: Rear
Price is per shock.
Please update quantity in your shopping cart to 2 for a complete set.
|,|Select "Front Shock" "Rear Shock"|-||-|||-||KONCOILSUSKI|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Mazda Miata Koni Coilover Susupension Complete Kit 1990-1997|,|308-031|,|1,782.99|,|1,284.95|,||,||,|5.000 |,||,||,||,|Koni Miata Coilover Susupension Complete Kit 1990-1997
You say you`re serious about handling, the type of person who wants maximum suspension tuning capability? Here`s what our Coil-over Kits can do for you:
* Threaded shock bodies enable up to .8-2.6" of lowering, depending on vehicle application
* Lowering can be corner-specific, for weight jacking
* As with Sport shocks, these are externally rebound-adjustable on most cars
* Plated shock bodies, gray metallic springs and red anodized alloy spring seats
* Lifetime Warranty
|,|"Shipping Cost" "add(+$95)"|-||-|||-||KOMICOSUCOKI|,|19MAMISUANDS8|,|Mazda Miata KONI Sport Lowering Kit 1999-2005|,|KON-1145-1034|,|1,460.00|,|1,045.02|,||,||,|5.000 |,||,||,||,|Mazda Miata KONI Sport Lowering Kit 1999-2005
Features:
- For more spirited steering & hotter handling, upgrade your suspension with a KONI Sport Lowering Kit
- Custom-engineered to fit your year, make and model
- Drops your center of gravity for sportier driving and a more streamlined appearance
- The KONI Sport shocks are fully adjustable—get the ideal dampening rate for the road or the track
- Comes with 4 KONI Sport struts and/or shocks, along with a complete set of H&R or Eibach lowering springs (depending on vehicle)
- Your KONI Sport Kit includes a Limited Lifetime Warranty
Description:
If tight curves and hairpin turns make the hairs on the back of your neck stand on end, then your passion for performance is true. But if you’re still rolling on a stock suspension system, you’re not experiencing the full potential of your ride. For heightened handling, drop your auto down with the KONI Sport Kit.
A lower center of gravity takes a lot of the slop out of your steering, and the KONI Sport Suspension Kit does just that. It brings you down closer to the ground, so every turn of the wheel feels tighter, more responsive and more commanding. Plus, the KONI shocks are fully-adjustable, allowing you to dial-in the dampening to suit your driving style.
Customization is the hallmark of the KONI Sport Suspension. Each kit is expressly engineered to work with your particular year, make and model and comes complete with adjustable KONI Sport shocks or struts, and H&R or Eibach lowering springs (depending on vehicle). What’s more, your KONI Sport Kit is backed by a Limited Lifetime Warranty.
|,|"Shipping Cost" "add(+$95)"|-||-|||-||KON-1125-1034|,|19MAMISUANDS9|,|Mazda Miata KONI STR.T Lowering Kit 1999-2005|,|kon-1125-1034|,|1,030.00|,|754.02|,||,||,||,||,||,||,|Mazda Miata KONI STR.T Lowering Kit 1999-2005
Features:
- For ferocious performance at a feasible price, bolt on the KONI STR.T Lowering Kit
- Custom-engineered to work flawlessly with your year, make and model
- Perfect for spirited drivers who want to add an aggressive edge to your ride’s profile
- Drops your center of gravity for sportier steering, tighter turning and hotter handling
- Comes with KONI STR.T shocks and/or struts, and either H&R or Eibach lowering springs (depending on vehicle)
- Your KONI STR.T Kit is backed by a Limited Lifetime Warranty
Description:
Exhilarating performance doesn’t always come with an excessive price tag. Give your ride a Formula 1 feel for a fraction of the cost with the KONI STR.T Kit. Engineered for excitement, this suspension upgrade delivers sporty handling, tighter steering, more responsive handling and a more intimidating appearance.
The KONI STR.T Suspension Kit drops your center of gravity down to the ground, enhancing your control around every turn. Plus, the lower ride height heightens your profile, giving you a meaner look on the streets.
Custom-engineered for your year, make and model, the KONI STR.T kit fits perfectly and installs directly. And, it comes with everything you need to replace your stock system: KONI STR.T shocks/struts and H&R or Eibach lowering springs (depending on vehicle). Better still, KONI covers your STR.T Kit with a Limited Lifetime Warranty.
|,|"Shipping & Handing" "add(+$95)"|-||-|||-||MAZDA-MIATA-KOYO-RADIATOR---KH-SERIES--2016--|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Koyo Radiator - KH Series 2016+|,|KH063152|,|480.00|,|379.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Koyo Radiator - KH Series 2016+
Product Description
Koyorad’s new “KH Series” radiators feature high density 25mm cores. Koyorad’s radiator design and selection of materials results in the most effective and efficient means of heat extraction while also allowing proper air circulation through the engine bay. Koyorad was able to increase coolant volume while keeping overall weight to a minimum. In typical fashion, Koyorad has engineered this radiator with precision, directly replacing the stock OEM plastic/aluminum radiator and will bolt easily to the factory equipped fan shroud for a quick and simple installation. Koyorad’s superior quality, precision hand welds, reliability and uniformity are what have earned Koyorad their excellent reputation in performance cooling worldwide.
Features:
* Koyorad KH 25mm Hyper Core with high efficiency louvered fins
* Three times individually pressure tested for quality
* CNC Machined Aluminum filler neck and drain plug
* Brushed Aluminum Finish
* Plug and Play installation using OEM fan shroud
|,|||-||KOYORAD-VH060650|,|19MAMIRAHOBE|,|Mazda Miata Koyo Radiator - VH Series 1999-2005|,|060650|,|399.95|,|345.00|,||,||,||,||,||,||,|Mazda Miata Koyo Radiator - VH Series 1999-2005
This Koyo Radiator fits 99-05 Miata ONLY.
This is Koyo's ALL ALUMINUM Miata Racing Performance Radiator, updated for 2015 to new 36mm Hypercore. Produced in Japan, its all aluminum construction is held to tight quality control standards that are illustrated in the outstanding Heliarc soldering, pristine tube and fin alignment, and mirror-like surface finish.
This Miata radiator unit is completely plug and play with all OEM hardware and thicker aftermarket sway bars! Koyo smartly designed their Miata radiator to take the factory cap, factory fans and even the factory plug so that service at your local dealer is not a problem and replacement parts are as close as your local autoparts store or Mazda dealer. NOTE new radiator cap NOT included, but we do offer KOYO Performance caps separately on the site. New drain plug is included. This 36mm koyo Miata radiator fits easier with OEM hardware and thicker aftermarket sway bars than bigger 2 inch cores, usually without having to trim the fan housings. Also very popular with the spec Miata racers because it cures most overheating issues without adding quite as much water weight as the 55mm/2inch core models.
Intended for manual transmission Miata only.
NOTE that owners of the 04-05 MazdaSpeed Miata will need to slot or bend brackets for the factory AC condenser and move that assembly forward a little to clear this much larger radiator.
|,|||-||KOYVH061885|,|20MAMIENPECO|,|Mazda Miata Koyo Radiator - VH Series 2006-2013|,|koyVH061885|,|480.00|,|388.00|,||,||,||,||,||,||,|Mazda Miata Koyo Radiator - VH Series 2006-2013
Description: Koyo 06-13 Mazda MX-5 Miata (MT) Radiator
The Hyper V-Core Series is the newest to the Koyorad All Aluminum Racing Radiator line up. An engine's cooling system in many newer vehicles are suffering due to limited space and crowding which affects air circulation. Our new ultra efficient Hyper V core was developed specifically for vehicles which see extreme heat, are limited in space, and where the factory inlet/outlet locations eliminate the option for a proper N-FLO design.
The Hyper V Series radiators have a specially designed fin and tube pitch which significantly increased its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. All Koyorad Hyper V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans.
|,|||-||MAMIMIALRA19|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Mazda Miata Koyorad Racing All Aluminum Radiator 1990-1997 |,|koyVH060245|,|414.00|,|340.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Koyorad Racing All Aluminum Radiator 1990-1997
The Hyper V-Core Series is the newest to the Koyorad All Aluminum Racing Radiator line up. An engine's cooling system in many newer vehicles are suffering due to limited space and crowding which affects air circulation. Our new ultra efficient Hyper V core was developed specifically for vehicles which see extreme heat, are limited in space, and where the factory inlet/outlet locations eliminate the option for a proper N-FLO design.
The Hyper V Series radiators have a specially designed fin and tube pitch which significantly increased its surface area while still allowing for excellent air circulation through the radiator. The Hyper V-Core series is the perfect solution where space savings and high performance is a must. All Koyorad Hyper V-Series All Aluminum Radiators are Nocolok brazed, designed as a factory fit, direct bolt in with no engine modifications necessary, and retain mounts for the stock fan shrouds and fans.
|,|||-||NAB-7301-NAB-7300|,|NABOOTS|,|Mazda Miata Large & Small Rubber Shift Boot Combo 1990-2005|,|nab-7301-nab-7300|,|119.95|,|96.02|,||,||,||,||,||,||,|Mazda Miata Large & Small Rubber Shift Boot Combo 1990-2005
Mazda Miata Large Rubber Shift Boot 1990-2005
This Mazda Miata Shifter Boot Insulator fits its all Mazda Miata MX-5 fits 1990-2005 and is unmatched in price.
The factory boots are usually become torn with 60,000 miles and let unwanted heat in the cockpit.
These Insulators are designed to fit all years 1990 - 2005 and provide service beyond the original's life span. Replaces Mazda Part Number NA01-64-481B
Mazda Miata Small Rubber Shift Boot 1990-2005
This Shifter Dust Boot its all Mazda Miata MX-5 Fits 1990-2005
Small shift boot at base of shift lever otherwise known as the shifter turret. The factory shift boots are usually become torn with 60,000 miles and leak oil on the transmission and then the floor until the turret became dry up; with the use of newer specially formulated rubbers these turret seals should last well beyond to protect you shifter mechanism.
Its a good idea to change this component at clutch intervals.
Note: This component is designed to fit all years 1990 - 2005 Replaces both Mazda Part Number M513-17-480A and M514-17-480A
|,|"Select Year" "Select Here" "1990-1997" "1999-2005 5 Speed, 1999-2001 6 Speed" "2002-2005 6 Speed"|-||-|||-||NC1-5309|,|20MAMIINAC|,|Mazda Miata Leather Brake Handle Boot 2006 - 2015|,|NC1-5309|,|49.95|,|36.00|,||,||,||,||,||,||,|Mazda Miata Leather Brake Handle Boot 2006 - 2015
Made from the finest cows on the planet, these RSpeed Leather Brake Handle Boots are an affordable touch of luxury to shifter area.
|,|||-||NA0-5024|,|NEW|,|Mazda Miata Leather Door Pulls by Jass Performance 1990-1997|,|910-122|,|112.55|,|99.90|,||,||,||,||,||,||,|Mazda Miata Leather Door Pulls by Jass Performance 1990-1997
Give your Miata a vintage race car look with a set of leather door pulls. These replace the hard plastic OEM handle and armrest. Genuine automotive leather with rustproof eyelets and decorative backplates. Logos are hot embossed, add contrasting or complimentary stitching. Straps fit snugly to the door panel. Reuse OEM screws, kit includes caps to cover them for a finished look. For the third OEM armrest mounting point, Jass offers matching leather blanking plates, or round plates in plastic or aluminum. Blanking kits are sold each. 1990-93 and 1996-97 doors will need 2 per door, 4 total per car. 1994-95 cars will only need 1 per door, 2 total per car.
|,|"Select Option" "Select Here" "Black Stitching" "Red Stitching" "Black Stitching with Roadster Logo" "Red Stitching with Roadster Logo"|-||-|||-||904-668|,|20MAMIINKN|,|Mazda Miata Leather Hand Brake Handle by IL Motorsport - Silver Bezels 2006-2008|,|904-668|,|89.99|,|79.99|,||,||,||,||,||,||,|Mazda Miata Leather Hand Brake Handle by IL Motorsport - Silver Bezels 2006-2008
Mazda seems to have drawn a line at the shifter and didn't give any thought to the hand brake handle. Our black leather hand brake handle with silver bezels, to match the factory, or chrome bezels, for a custom look, finishes the interior off nicely. Installation is straight-forward and doesn't require any tools.
|,|||-||GEMAMILEBRHA|,|NBINKN|,|Mazda Miata Leather Handbrake Handles by IL Motorsport 1990-2005|,|916-203|,|89.99|,|69.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Leather Handbrake Handles by IL Motorsport 1990-2005
Leather handbrake handle takes a simple twist, literally, to install and the leather with accents will enhance the look of your interior.
|,|"Select Color" "Select Here" "Black/Satin" "Black/Chrome"|-||-|||-||906-100|,|NAKNOBS|,|Mazda Miata Leather/Wood Steering Wheel by Tourist Trophy 1990-1997|,|906-150|,|341.45|,|299.02|,||,||,||,||,||,||,|Mazda Miata Leather/Wood Steering Wheel by Tourist Trophy 1990-1997
This steering wheel is styled after those usually found only on expensive sport cars and luxury sedans. This wheel features beautiful straight grain rosewood mated with expertly fitted and stitched black leather. If you love the look and feel of leather and wood, nothing else on the market compares. Professional installation highly recommended.
Kit re-uses stock air bag and air bag cover.
|,|||-||REARSIDELAMP|,|NBLIGHTING|,|Mazda Miata LED Both Side REAR Side Marker Lamps 1990-2005|,|0803-2019|,|98.02|,|64.02|,||,||,||,||,||,||,|Mazda Miata LED Both Side REAR Side Marker Lamps 1990-2005
2X Rear Side markers (Pair)
Installation: Direct plug and play installation, perfectly replace factory parts, no modification needed; this product features as a replacement and upgrade for your Mazda Miata MX-5 front and rear side marker light.
Features: Red Lens. Powered by high power SMD LED diodes with amber LED on the front side marker lights that form a perfect focal strip with a super bright lighting output.
Includes: 2pcs LED side marker lamps light kits. Upgrade your Mazda Miata MX-5 with a new fashion style Red lens front led side marker light. Elevates your muscle car's aura and even adds additional safety visibility features.
|,|||-||ANZO321212|,|NBLIGHTING|,|Mazda Miata LED Tail Lights - Black 1999-2005|,|ANZO321212|,|462.93|,|319.95|,||,||,||,||,||,||,|Mazda Miata LED Tail Lights - Black 1999-2005
Overview
Anzo LED Taillights
These high quality LED Taillights are designed to update the look of your vehicle, while coordinating with the other ANZO light upgrades. Easily installed - they directly replace your factory tails. These lights will instantly set your vehicle apart.
Click HERE for an ANZO LED Taillight installation article from our blog on a '07 Toyota Tundra.
LED's use less power and emit almost no heat
Are resistant to vibration and shock - better for off road
Offers superior brightness
All D.O.T. compliant to FMVSS-108
OEM Style weather tight connections and wire harnesses
Simply plug and play
|,|||-||P1167SQ|,||,|Mazda Miata Lightweight Aluminum Square Pattern Grille 04+, Mazdaspeed|,|P1167SQ|,|109.95|,|88.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Lightweight Aluminum Square Pattern Grille 04+, Mazdaspeed
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Lightweight Grilles are made of aluminum, and have a durable powdercoated - not painted - finish of silver or black. Installation is easy. This should have been a factory part; no Miata should be without one.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||P1068SQ-|,|NAEXGRBRA|,|Mazda Miata Lightweight Aluminum Square Pattern Grille 1990-1997|,|P1068SQ|,|88.95|,|78.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Lightweight Aluminum Square Pattern Grille 1990-1997
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Lightweight Grilles are made of aluminum, and have a durable powdercoated - not painted - finish of silver or black. Installation is easy. This should have been a factory part; no Miata should be without one.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||P1113SQ|,|NBGRILLANDBRA|,|Mazda Miata Lightweight Aluminum Square Pattern Grille 1999-2000|,|P1113SQ|,|88.95|,|78.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Lightweight Aluminum Square Pattern Grille 1999-2000
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Lightweight Grilles are made of aluminum, and have a durable powdercoated - not painted - finish of silver or black. Installation is easy. This should have been a factory part; no Miata should be without one.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||P1130SQ-|,|NBGRILLANDBRA|,|Mazda Miata Lightweight Aluminum Square Pattern Grille 2001-2005|,|P1130SQ|,|88.95|,|78.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Lightweight Aluminum Square Pattern Grille 2001-2005
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Lightweight Grilles are made of aluminum, and have a durable powdercoated - not painted - finish of silver or black. Installation is easy. This should have been a factory part; no Miata should be without one.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||NC1-4342|,|20MAMIEXGRAN|,|Mazda Miata Lower Bumper Stainless Steel Chrome Mesh Grille Insert 2006-2008|,|NC1-4342|,|155.95|,|129.02|,||,||,||,||,||,||,|Mazda Miata I.L. I Motosport Stainless Steel Billet Upper Radiator Grille 2006-2008
With a completely unique look, these high quality, fully stainless steel billet upper radiator grilles are a superb addition for your Mk3's exterior. Designed to fit over the top of the existing plastic grille, they are supplied with all the required fittings and instructions.
|,|||-||NA-LOWER-STEERING-COVER|,|INSETE|,|Mazda Miata Lower Steering Column Cover 1990-1997|,|OEM-NA01-60-230A-00|,|22.07|,|17.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Lower Steering Column Cover 1990-1997
#9 on Diagram Shown
-Black Plastic
|,|||-||NA-LOWER-STEERING-COLUMN-PANEL|,|INSETE|,|Mazda Miata Lower Steering Column Panel 1994-1997|,|OEM-NA75-64-270C-00|,|160.96|,|126.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Lower Steering Column Panel 1994-1997
#11 Shown on Diagram
Color: Black
|,|||-||MR-LS-MMX506|,|20MAMISUANDS|,|Mazda Miata Lowering Springs 2006-2014|,|MR-LS-MMX506|,|199.95|,|168.95|,||,||,||,||,||,||,|Mazda Miata Lowering Springs 2006-2014
Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature “sagging”.
The result is a spring that specifically offers racecar handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very “streetable” by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: Spring rates and drop amount vary by different vehicle application and chassis load.)
Specifications:
Mazda Miata 06-14 (NC)
Lowering rate:
Front: 1.9"
Rear: 1.8"
|,|||-||MR-LS-MMX516|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Lowering Springs 2016+|,|MR-LS-MMX516|,|199.95|,|168.95|,||,||,||,||,||,||,|Mazda Miata Lowering Springs 2016+
Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature “sagging”.
The result is a spring that specifically offers racecar handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very “streetable” by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: Spring rates and drop amount vary by different vehicle application and chassis load.)
Spec:
- Color: Orange
- Lower rate: 16mm Front, 10mm Rear
|,|||-||244-016|,|NBLURAEX|,|Mazda Miata Luggage Rack with Wood Slats, Stainless Steel 1990-2005|,|244-016|,|349.05|,|299.90|,||,||,||,||,||,||,|Mazda Miata Luggage Rack with Wood Slats, Stainless Steel 1990-2005
Luggage racks are an extremely useful accessory, particularly when touring, providing invaluable extra luggage space. These clip-on boot racks, available with wood slats, and constructed from stainless steel, are ideal for occasional use. They are supplied with fittings; including rubber feet, strap clamps and a third support bracket which can be used at the front of the trunk lid to help reduce stress on the side brackets, or kept as a spare.
|,|"Oversize Fee" "add(+$15.00)"|-||-|||-||MAZDA-MIATA-M-SPEED-FRONT-LIP-1999-2005|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata M Speed Front Lip 1999-2005|,|99MZMX52DMSP-011|,|325.00|,|278.00|,||,||,|0.000 |,||,||,||,|Mazda Miata M Speed Front Lip 1999-2005
1999-2005 Mazda Miata M Speed Front Lip. All Vis fiberglass Body Kits; bumpers, Lips side skirts, spoilers, and hoods are made out of a high quality fiberglass. All Body Kits come with wire mesh if applicable. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all Body Kit parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description. Intended for OFF ROAD use only.
|,|"Freight Cost" "add(+$79.00)"|-||-|||-||MISTCASYPEEX3|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata MagnaFlow Stainless Cat-Back Systerm Performance Exhaust 1990-1997|,|MAG-15715|,|780.92|,|699.00|,||,||,|10.000 |,||,||,||,|MagnaFlow Miata Stainless Cat-Back System PERFORMANCE EXHAUST 1990-1997
Sound Clips:
(Clip#1)
(Clip#2)
(Install Instructions)
Material: 100% Stainless Steel
Tubing O.D. Size: 2.25in.
System Type: Cat-Back
TIP O.D. Size: 4in.
TIP Quantity: 1
Single/Dual: Single
Exit Position: Rear Exit
Features and Benefits:
* Lifetime Warranty
* Dyno Tested And Proven To Make Power
* Performance Gains In Horsepower And Torque
* Great Sound - Has A Smooth; Deep Tone
* Easy To Install, Mandrel-Bent
* All Welded. Built To Last
For Miata years 1990-1997
|,|"Shipping Cost" "add(+$119)"|-||-|||-||MAMICOPEPESE1|,|NBINPE|,|Mazda Miata Manual Transmission Billet Finish Pedal Sets by Cobalt 1990-2005|,|MOS-998-204|,|79.95|,|59.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Manual Transmission Billet Finish Pedal Sets by Cobalt 1990-2005
*Manual Transmission
*Billet Finish
Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Our billet pedal system is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to "Heel & Toe". Set includes Accelerator, Brake, Clutch and Footrest pedals. Comes complete with instructions and easily installed using simple hand tools.
Click Here for Instructions
|,|"Select Year" "Select Here" "1990-1997" "1999-2005"|-||-|"Select Roadster Logo" "Select Here" "No" "Yes"|-||-|||-||MAMICOPEPESE2|,|NAPEDALS|,|Mazda Miata Manual Transmission Matte Finish Pedal Sets by Cobalt 1990-1997|,|MOS-998-213|,|89.95|,|69.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Manual Transmission Matte Finish Pedal Sets by Cobalt 1990-1997
Your feet are an integral part of the Miata driving experience. From the factory, your Miata's control pedals are meant to work with a wide variety of driving tastes. Our billet pedal system is the ultimate for those of you who want to feel one with the road. Made specifically for the Miata and machined from aircraft quality aluminum, you will enjoy improved feel of the controls and outstanding grip. More experienced drivers will appreciate the ability to "Heel & Toe". Set includes Accelerator, Brake, Clutch and Footrest pedals. Comes complete with instructions and easily installed using simple hand tools.
Click Here for Instructions
|,|||-||803-219|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata MASS AIR FLOW SENSOR, METER 1990-1992|,|803-219|,|269.95|,|198.00|,||,||,||,||,||,||,|Mazda Miata MASS AIR FLOW SENSOR, METER 1990-1992
|,|||-||MAZDASPEED-RADIATOR-CAP-1-3|,|19MAMIENPEVI|,|Mazda Miata Mazdaspeed Radiator Cap 1990-2015|,|REV-SPEEDRADCAP|,|89.00|,|84.95|,||,||,|0.000 |,||,||,||,|Mazdaspeed Radiator Cap
*Availability: Ships in 5-10 business days
Product from JAPAN made by Mazdaspeed. One of the best radiator cap on the market.
• High quality product from Japan
• Stylish
• Available for aftermarket radiators
• Only available for NA Miata (1989-1997), NB Miata (1998-2005) & NC Miata (2006-2014)
|,|||-||MAZDA-MIATA-FRONT-LOWER-ARM-REPAIR-KIT-1990-2005|,|19MAMISUANDS|,|Mazda Miata Megan Racing Front Lower Arm Repair Kit 1990-2005|,|MRS-MZ-0700|,|158.00|,|139.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Megan Racing Front Lower Arm Repair Kit 1990-2005
Factory Miata bushings are made from a rubber compound, which deteriorates over the years. The Miata bushings become softer, therefore becoming less capable of resisting the forces being placed on them.
The Megan Racing bushings on the other hand are 20%-30% stiffer and do not deteriorate in performance over time. This will also replace your old old ball joint to give you a more accurate feel with the steering wheel. The benefit of the increased stiffness will have more control of the suspension components making the driver feel more comfortable.
NOTE: Due to the complexity of the installation, professional installation is HIGHLY RECOMMENDED!!!!!
- Package comes with 4 harden rubber and 2 ball joint) 6pcs per set
- 150% Harder that stock bushings
- Made with high-strength and anti-cracking rubber material
- Rubber viscosity is around 2000KGS
|,|||-||MAZDA-MIATA-MEGAN-RACING-FRONT-UPPER-ONE-PIECE-RACE-SPEC-STRUT-TOWER-BAR-1990-2005|,|19MAMISUANDS1|,|Mazda Miata Megan Racing Race Front Upper Spec Strut Tower Bar 1990-2005|,|MR-SB-MMX590FU-1P|,|159.95|,|86.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Megan Racing Front Upper One-Piece Race Spec Strut Tower Bar 1990-2005
One-Piece Race Spec Strut Tower Bar constructed of strong Aluminum to extremely tight tolerances and then polished to perfection. Designed for the Toyota Camry to decrease body roll, this bar ties the chassis from left to right at critical stress points (Between the shock/strut towers).
As you drive and maneuver, your car undergoes many different forces that the chassis of the car absorbs; the brace helps to absorb the energy and directs these forces into your suspension components so that they can better do their job and serve their purpose more effectively.
A must for any track-driven, and a great addition to any street or show car, this bar truly lives up to the Megan Racing name.
|,|"Application" "Mazda MX-5 Miata 1990-2005"|-||-|||-||905-015|,|20MIMIEXPA|,|Mazda Miata Mesh Wind Blocker Black 2006-2021|,|905-015|,|299.99|,|169.98|,||,||,||,||,||,||,|Mazda Miata Mesh Wind Blocker 2006-2021
Keep the wind out of your face and hair with our stylish wind blocker. Offering a flush, smooth fit, as well as a low profiile design, you can drive in top-down comfort without detracting from the sporty look of your Miata. Fits both soft top and power retracting top MX-5's.
|,|"Select Year" "Select Here" "2006-2015 add(+$100)" "2016-2021"|-||-|||-||MAZDA-MIATA-METER-HOOD-1990-1993|,|NADASHBOARD|,|Mazda Miata Meter(Gauge) Hood 1990-1997|,|NA1-7306|,|162.95|,|108.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Meter(Gauge) Hood 1990-1997
If your Miata's Instrument Hood Meter surround broken.
We now have an affordable Instrument surrounds which are a direct fit for your 1990-1993 and 1994-1997 Miata.
Made from the highest quality UV protected ABS plastic, our OE Spec hood meters meet if not exceed factory appearance and specs at a fraction of the cost.
The bezels are supplied with all the original factory clips installed as well as instructions for a quick and easy installation.
|,|"Select Year" "Select Here" "1990-1993" "1994-1997"|-||-|||-||MAZDA-MIATA-MID-WING-NO-LIGHT-FIBERGLASS-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata Mid Wing No Light Fiberglass 1990-1997|,|591402|,|345.00|,|305.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Mid Wing No Light Fiberglass 1990-1997
1990-1997 Mazda Miata Mid Wing No Light Fiberglass. Manufactured by Wings West, a pioneer in polyurethane bodykit manufacturing and design. Parts with part numbers that begin with the prefix 89 are made out of durable, flexible polyurethane. While parts with part numbers that begin with the prefix 59 or 49 are made out of multi-layer fiberglass. Wings West parts are made in USA. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description.
Intended fro OFF ROAD use only.
|,|"Freight Cost" "add(+$169.00)"|-||-|||-||MMRAD-MIA-90XR|,|19MAMIENPECO|,|MAZDA MIATA MISHIMOTO 18.0" X 27.8" SINGLE PASS 3-ROW RACE ALUMINUM RADIATOR 90-97|,|MMRAD-MIA-90XR|,|531.60|,|393.02|,||,||,||,||,||,||,|MAZDA MIATA MISHIMOTO 18.0" X 27.8" SINGLE PASS 3-ROW RACE ALUMINUM RADIATOR 90-97
Lightweight
100% aluminum construction
TIG-welded for increased durability
Premium radiator has 3-row core for improved strength and reliability.
18.0" high x 27.8" long
High density of rows for excellent cooling capacity.
More contact points for additional heat transfer.
3-row design creates more air turbulence, maximizing cooling efficiency.
Includes magnetic drain plug
Includes a 1.3 Bar High-Pressure Radiator Cap
Mishimoto Lifetime Warranty
DESCRIPTION:
Every Mishimoto race aluminum radiator is designed and engineered to maximize cooling efficiency, boost engine functions, and most importantly, protect your car from overheating on and off the track. Lightweight, made from 100% brazed aluminum, and cast end tanks TIG-welded for increased durability, Mishimoto race radiators will enhance the overall performance of your engine. Like every Mishimoto radiator, this extremely efficient aluminum radiator comes with the incredible Mishimoto Lifetime Warranty.
|,|||-||MIMIALRA19|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Mishimoto Aluminum Radiator 1990-1997|,|MMRAD-MIA-9097|,|390.07|,|293.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Mishimoto Aluminum Radiator 1990-1997
Whether you're a daily driver searching for a dependable quality upgrade from your current OEM radiator, or you’re a devoted racer who needs a lightweight, high-performance radiator, Mishimoto has just what you're looking for. Many drivers overlook the importance of having a high-quality aluminum radiator installed, yet it is one of the most important components in your vehicle's engine. Mishimoto radiators are designed to efficiently reduce the heat from vital areas. Made with 100% brazed aluminum for a clean OEM fit, our aluminum radiators ensure excellence and a lifetime of efficient cooling. Perfect for any turbocharged, supercharged, or nitrous-oxide engine. Check out our silicone hose kits, a perfect match with our aluminum radiators.
An ideal upgrade to the stock OEM radiator, the Mishimoto aluminum radiator will give your Miata a cooler, more efficient running engine.
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996 and 1997
|,|||-||MAMIMIPEALFA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Mazda Miata Mishimoto Performance Aluminum Fan Shroud w/Slim Electric Fans 1990-1997 |,|MMFS-MIA-90|,|313.06|,|215.90|,||,||,|0.000 |,||,||,||,|Mazda Miata Mishimoto Performance Aluminum Fan Shroud w/Slim Electric Fans 1990-1997
The Mishimoto 1990-1997 Mazda Miata fan shroud kit will considerably improve engine cooling functions and the overall performance of your vehicle. All Mishimoto fan shrouds are significantly lighter than standard fan shrouds, and are a direct OEM fit. A Mishimoto fan shroud will effectively drive out heat from the engine bay and deliver a significant amount of cooler air directly to the Miata aluminum radiator. At the same time the fan shroud serves another very important purpose; securing the fan blades. The fan shroud will keep the fan blades in place, which otherwise could potentially damage other essential components in your engine.
Includes:
Aluminum Shroud
(2) 12" Slim Electric Fans
Overall Size:
Height - 15.8"
Length - 25.2"
Width - 2.5" (including fans)
Mounting Hardware:
(8) M6X20 Screws
(2) M6X16 Screws
(8) M6 Nuts
(10) M6 Plain Cushions
(10) M6 Elastic Cushions
*Fans come pre-assembled with fans mounted
|,|||-||MAMIMIPEALFA1|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Mazda Miata Mishimoto Performance Aluminum Fan Shroud w/Slim Electric Fans 1999-2005|,|MMFS-MIA-99|,|325.00|,|215.90|,||,||,|0.000 |,||,||,||,|Mazda Miata Mishimoto Performance Aluminum Fan Shroud
The Mishimoto 1999-2005 Mazda Miata fan shroud kit will considerably improve engine cooling functions and the overall performance of your vehicle. All Mishimoto fan shrouds are significantly lighter than standard fan shrouds, and are a direct OEM fit. A Mishimoto fan shroud will effectively drive out heat from the engine bay and deliver a significant amount of cooler air directly to the Miata aluminum radiator. At the same time the fan shroud serves another very important purpose; securing the fan blades. The fan shroud will keep the fan blades in place, which otherwise could potentially damage other essential components in your engine.
Includes:
Aluminum Shroud
(2) 12" Slim Electric Fans
Overall Size:
Height - 15.8"
Length - 25.2"
Width - 2.5" (including fans)
Mounting Hardware:
(8) M6X20 Screws
(2) M6X16 Screws
(8) M6 Nuts
(10) M6 Plain Cushions
(10) M6 Elastic Cushions
*Fans come pre-assembled with fans mounted
|,|||-||MISMMRAD-MIA-06|,|NEW|,|Mazda Miata Mishimoto Performance Aluminum Radiator 2006-2015|,|misMMRAD-MIA-06|,|479.93|,|359.90|,||,||,||,||,||,||,|Mazda Miata Mishimoto Performance Aluminum Radiator 2006-2015
FITS: 2006-2015 Mazda NC Miata MX-5
PRODUCT FEATURES
-Direct fit for 2006-2015 Mazda NC Miata MX-5
-34mm core is 112% thicker than stock
-114% increase in core volume
-51% increase in fluid capacity
-92% increase in fin surface area
-All-aluminum construction with durable, TIG-welded end tanks
-Includes Mishimoto Magnetic Oil Drain Plug with high-quality dowty seal
-Mishimoto Lifetime Warranty
DESCRIPTION
Every generation of the MX-5 Miata is a step closer to Mazda's motto to "celebrate driving," and the 2006-2015 NC MX-5 Miata is no exception. With its lightweight chassis and naturally-aspirated 2.0L engine, the NC MX-5 Miata is a blast to drive on the street or the track. While Mazda built the NC Miata to keep up with the daily-driving enthusiast, power-adding mods or prolonged time on the track can start to show the Miata's weak points.
The front end of the NC may evoke the joy of driving, but it doesn't let a lot of airflow through the radiator. Even with a facelift in 2008, the larger grille still sits low on the front valence, limiting airflow. Without cuttings holes in your Miata's happy front bumper, the best solution is a more efficient radiator. That's why Mishimoto has developed this performance aluminum radiator for the 2006-2015 Mazda NC MX-5 Miata.
The Mishimoto NC Miata radiator ensures your Miata stays cool whether you're carving the canyons or setting lap records at the track with a 114% increase in core volume and 51% increase in coolant capacity. The Mishimoto radiator also boast a core that is 112% thicker than stock with a 92% increase in fin surface area to make the most of the air coming through the grille. Like all our Miata performance products, this 2006-2015 Mazda NC Miata MX-5 Performance Aluminum Radiator is backed by our Mishimoto Lifetime Warranty for a lifetime of cooling.
|,|||-||MIMAMISIHEHO2|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Mazda Miata Mishimoto Silicone Heater Hose Set 1994-1997|,|MMHOSE-MIA-94HHBK|,|130.00|,|106.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Mishimoto Silicone Heater Hose Set
Mazda Miata Mishimoto heater hoses are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all designed and engineered for a direct OEM fit.
For Mazda Miata Years: 1994, 1995, 1996, and 1997
|,|||-||MAMIMISIRAHO|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Mazda Miata Mishimoto Silicone Radiator Hose Kit 1990-1993 |,|MMHOSE-MIA-90BK|,|135.00|,|122.25|,||,||,|0.000 |,||,||,||,|Mazda Miata Mishimoto Silicone Radiator Hose Kit
Mishimoto silicone 1990-1993 Mazda Miata hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Mazda Miata.
Interior Material: Heat-Resistant Embedded Fibers
Exterior Material: Silicone
Max Temperature: 330 F
|,|"Select Color" "Black" "Blue" "Red"|-||-|||-||MAZDA-MIATA-MISHIMOTO-SILICONE-RADIATOR-HOSE-KIT-1994-1997|,|ENPE19|,|Mazda Miata Mishimoto Silicone Radiator Hose Kit 1994-1997|,|MMHOSE-MIA-94BK|,|183.11|,|107.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Mishimoto Silicone Radiator Hose Kit 1994-1997
Mishimoto silicone 1994-1997 Mazda Miata hose kits are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Mazda Miata.
Interior Material: Heat-Resistant Embedded Fibers
Exterior Material: Silicone
Max Temperature: 330 F
|,|"Select Color" "Black" "Blue" "Red"|-||-|||-||MAMIMISIRAHO2|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Mazda Miata Mishimoto Silicone Radiator Hose Kit 1999-2005|,|MMHOSE-MIA-99BK|,|145.00|,|122.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Mishimoto Silicone Radiator Hose Kit
Mishimoto silicone Miata radiator hose kits are made with a dual layer combining high-grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all with an OEM replacement fit! Perfect for your Mazda Miata.
Interior Material: Heat-Resistant Embedded Fibers
Exterior Material: Silicone
Max Temperature: 330 F
Inner Diameter
Hose 1: 1.18"
Hose 2: 1.18"
Outer Diameter
Hose 1: 1.54"
Hose 2: 1.54"
|,|"Select Color" "Black" "Blue" "Red"|-||-|||-||MAZDA-MIATA-MISHIMOTO-X-LINE-PERFORMANCE-ALUMINUM-RADIATOR-1990-1997|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Mishimoto X-Line Performance Aluminum Radiator 1990-1997|,|MMRAD-MIA-90X|,|490.26|,|367.90|,||,||,|5.000 |,||,||,||,|Mazda Miata Mishimoto X-Line Performance Aluminum Radiator 1990-1997
* Premium radiator has 3-row core for improved strength and reliability.
* 16% thinner-than-stock tubes allow for more surface contact, increasing cooling efficiency.
* Greater density of rows for higher cooling capacity.
* More contact points for additional heat transfer.
* 3-row design creates more air turbulence, maximizing cooling efficiency.
* Includes magnetic drain plug
* Includes a high-pressure 1.3 bar Mishimoto radiator cap
* Lifetime warranty
|,|||-||MAZDA-MIATA-ALUMINUM-FAN-SHROUD-KIT-1990-1997|,|ENPE19|,|Mazda Miata Mizu Aluminum Fan Shroud Kit 1990-1997|,|FS-MIA-90|,|267.00|,|185.50|,||,||,|0.000 |,||,||,||,|Mazda Miata Mizu Aluminum Fan Shroud Kit 1990-1997
The Mizu Aluminum fan shroud kit is the perfect upgrade to your existing fan shroud and helps cool your engine when used in conjunction with your Mizu aluminum radiator. Made from the highest grade of aluminum, all Mizu fan shroud kits are hand-welded and hand-made to create a perfect fan shroud with a direct OEM fitment without any cutting or modification needed. Mizu aluminum fan shroud kits enhance your cars performance by its light weight aluminum structure and its heat eliminating composition thus allowing your car to remain both cooler and lighter. All Mizu fan shroud kits come with an unparallel lifetime warranty.
Fan Measurements:
Height - 15.8"
Length - 25.2"
Width - 3.5"(Fan Included)
Chassis Codes:
NA6(8) C
Add'l Info:
Fits OEM and Mizu Radiators
|,|||-||MAZDA-MIATA-MIZU-SILICONE-HOSE-KIT-1989-1993|,|ENPE19|,|Mazda Miata Mizu Silicone Hose Kit 1989-1993|,|H-MIA-89BK|,|145.00|,|78.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Mizu Silicone Hose Kit 1989-1993
Mazda Miata Mizu Silicone hose kits are made by combining three layers of high grade silicone and heat-resistant embedded fibers eliminating the likelihood of cracking and tearing of your hose. The Mazda Miata Mizu Silicone hoses are engineered to provide increased heat reduction and pressure resistance. These Mazda Miata Mizu Silicone hoses are designed and engineered for a direct OEM fit no modification needed.
Mizu Silicone hoses are backed by Mizu's unparallel lifetime warranty.
|,|||-||MAZDA-MIATA-MIZU-SILICONE-HOSE-KIT-1994-1997|,|ENPE19|,|Mazda Miata Mizu Silicone Hose Kit 1994-1997|,|H-MIA-94BK|,|145.00|,|78.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Mizu Silicone Hose Kit 1994-1997
Mazda Miata Mizu Silicone hose kits are made by combining three layers of high grade silicone and heat-resistant embedded fibers eliminating the likelihood of cracking and tearing of your hose. These Mazda Miata Mizu Silicone hoses are engineered to provide increased heat reduction and pressure resistance. The Mazda Miata Mizu Silicone hoses are designed and engineered for a direct OEM fit no modification needed.
Mazda Miata Mizu Silicone hoses are backed by Mizu's unparallel lifetime warranty.
|,|||-||MAZDA-MIATA-MOTOR-MOUNT---ENGINE-MOUNT-1994-2000|,|19MAMIENPEVI|,|Mazda Miata Motor Mount / Engine Mount 1994-2000|,|AWR-5301-94|,|269.99|,|240.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Motor Mount / Engine Mount 1994-2000
Fabricated steel replacement motor mount with separate polyurethane bushing bracket that mounts in the factory location giving more secure engine support. These mounts are tig welded and powder coated silver.
Available in 3 durometers. 70 soft [multipurpose], 88 medium [ agressive ] and 95 hard [ for track use only ]
Weight: 12.00 LBS
|,|"Durometer Size" "Select Here" "70" "88" "95"|-||-|||-||MAZDA-MIATA-MOTOR-MOUNT--ENGINE-MOUNT-2001-2005|,|19MAMIENPEVI|,|Mazda Miata Motor Mount / Engine Mount 2001-2005 - Silver|,|AWR-5301-01|,|300.00|,|250.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Motor Mount / Engine Mount 2001-2005 - Silver
The Factory competition mounts are good, but not THIS good.
These Miata Engine Mounts are completely fabricated new mounts. Completely new, made from 3 1/16" steel, TIG welded and powder coated silver.
With all durometer bushings available. 70 [ soft ] 88 [ medium] and 95 [ hard ]. Extended to pick up rear of block as the original oem mount does.
Weight: 16.00 LBS
|,|"Durometer Size" "Select Here" "70" "88" "95"|-||-|||-||MAZDA-MIATA-MOTOR-MOUNT-SET-1-6-1990-1993|,|ENPE19|,|Mazda Miata Motor Mount / Engine Mount Set 1.6 - 1990-1993|,|AWR-5301-90|,|289.99|,|245.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Motor Mount / Engine Mount Set 1.6 - 1990-1993
Fabricated steel replace motor mount with separate polyurithane bushing that mounts in the factory location giving more secure engine support. These mounts are tig welded and powder coated silver.
Available in 3 durometers. 70 soft [multipurpose], 88 medium [agressive] and 95 hard [for trak use only].
Weight: 12.00 LBS
|,|"Durometer Size" "Select Here" "70" "88" "95"|-||-|||-||NA0-301997|,|NAFLOORING|,|Mazda Miata MX-5 7 Piece Quilted Interior Trim Set for 1990-1997|,|NA0-301997|,|799.00|,|649.00|,||,||,||,||,||,||,|Mazda Miata MX-5 7 Piece Quilted Interior Trim Set for 1990-1997
Made in Germany by I.L Motorsport,
The I.L.Motorsport team has been working hard to create a high quality set of interior trim parts, that can also be used as individual parts. Our focus was targeted on the diamond stitch look, that gives the parts an amazing vintage sixties look, a look that is absolute cult in the MX-5 scene.
All parts of this set are high quality and have a perfect fit, consisting of a fleece backing, foam centerpiece and grained synthetic leather top layer. The chosen materials are not ready made fabrics, but custom made for I.L.Motorsport. The interior parts are designed to utilize the OEM mounting points (clips and velcro) for easy, worry free installation.
The 4 piece set consists of the following parts:
•Sidestep trim right and left side
•Transmissiontunnel trim right and left
•Lower package tray trim
•Upper package tray trim & Beltline trim
***Seat Covers Pictured are not a part of this kit
|,|||-||AEM-21-786C|,|NEW|,|Mazda Miata MX-5 AEM Cold Air Intake 2016+|,|AEM-21-786C|,|557.89|,|478.02|,||,||,||,||,||,||,|Mazda Miata MX-5 AEM Cold Air Intake 2016+
The AEM-21-786C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle’s restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit select Mazda MX-5 Miata models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is located in the original air box space and is protected by a heat shield which is designed to reduce intake air temperature and increase horsepower. Attached to the heat shield is an aluminum coolant overflow reservoir that replaces the stock reservoir so that the air intake will fit properly. The air intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine’s factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is easy to install with commonly available tools. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-786C vehicle applications to determine the legal status for each vehicle.
AEM 21-786C Product Specifications:
Estimated Horsepower Gain 8 HP @ 6000 RPM
Replacement Filter 21-2157DK
Air Filter Color Red
Air Filter Material Non-woven Synthetic
Air Filter Outlet Shape Round
Clamps Included 3
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
Product Style AEM Cold Air Intake System
Intake Pipe Color / Finish Gunmetal Gray
Intake Pipe Material Aluminum
Street Legal In All US States No
TUV Approved (Europe) No
Weight 8 lb (3.6 kg)
Product Box Height 12.25 in (311 mm)
Product Box Length 20.25 in (514 mm)
Product Box Width 12.25 in (311 mm)
California Restricted Not legal for sale or use in California
Mounting Hardware Included Yes
Warranty Limited Lifetime
|,|||-||909-250|,|ENPE19|,|Mazda Miata MX-5 Aluminum Coolant Overflow Tank w/Cap by Moroso 1990-1997|,|909-250|,|288.99|,|204.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Aluminum Coolant Overflow Tank w/Cap by Moroso 1990-1997
Moroso aluminum tanks don't just look good, they have been engineered for performance! Aluminum is stronger and lighter weight than the factory plastic reservoirs. Performance features have been built into these tanks while retaining stock characteristics where necessary. All tanks can be polished for a high shine or anodized for a personal touch. Comes with a Moroso logo cap.
|,|||-||MR-ABE-MMX599|,|NEW|,|Mazda Miata MX-5 Axle Back Exhaust System 1999-2005|,|MR-ABE-MMX599|,|398.00|,|263.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Axle Back Exhaust System 1999-2005
Our Axle-Back Exhaust Systems for the Mazda Miata MX-5 replaces the typically quiet and restrictive factory muffler and exhaust components with a larger, free flowing straight-thru type muffler. Whereas OEM muffler constructions typically rely on multiple chambers to bounce and absorb sound frequencies. This results in the increase of backpressure as exhaust gasses are deflected back and forth robbing engine response and power. Megan Racing Axle-Back Exhausts system utilize straight-thru perforated glass-pack mufflers dramatically decreasing exhaust backpressure as the gasses are allowed a straight, unrestricted passage while sound frequencies are absorbed by the glass-pack fiber material providing a nice, mellow tone. Comprised of 100% T-304 stainless steel, Megan Racing exhaust components are designed to last the test of time and protected with a 1-year warranty against manufacturer defects. Off-Road Use Only.
Applications:
- Mazda Miata MX-5 1.8L 1999-2005
Specifications & Features:
- T-304 Stainless Steel
- Stainless Tip
- Piping Size: 60mm ID
- Tip Size: 102mm OD
- 1-Year Warranty Against Manufacturer Defects
- Off-Road Use Only
NOTE: All Megan Racing Exhaust and Suspension products are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.
All Megan Racing exhaust system components will alter and affect the vehicle's overall sound in pitch and volume. All to which is subjective in manner. Megan Racing will not claim responsibility and/or accept returns based on an individual's personal preference.
|,|"Shipping cost" "add(+$95)"|-||-|||-||BR-S550860|,|NEW|,|Mazda Miata MX-5 Beatrush Aluminum UnderPanel ND 2016+|,|BR-S550860|,|445.55|,|294.99|,||,||,||,||,||,||,|Mazda Miata MX-5 Beatrush Aluminum UnderPanel ND 2016+
Beatrush Under Panel enhances downside rectification at high speed and generates down force. It also restrain the air stream from getting caught in the engine room to inhibit the engine from over heating.
Application:
Mazda MX-5 Miata (2016, 2017, 2018)
Mazda MX-5 Miata RF (2016, 2017, 2018)
|,|"EMS Air Mail" "add(+$95)"|-||-|||-||BR-S85087-FTA|,|NEW|,|Mazda Miata MX-5 Beatrush Front Strut Bar 2016+|,|BR-S85087-FTA|,|314.55|,|296.45|,||,||,||,||,||,||,|Mazda Miata MX-5 Beatrush Front Strut Bar 2016+
Even the most powerful car can not perform well at a high level without sufficient body rigidity. The Beatrush Strut Brace enhances the body rigidity and inhibits warping, which makes the suspension movement smooth.
Application:
Mazda MX-5 Miata (2016, 2017, 2018)
Mazda MX-5 Miata RF (2016, 2017, 2018)
|,|||-||BEATRUSH-HARNESS|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Beatrush Harness Bar 1990-2015|,|beatrush-harness|,|369.99|,|284.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Beatrush Harness Bar 1990-2015
Product from Japan made by Beatrush. It is basically made for those who want to run a harness but don't have a roll bar OR their roll bar does not have harness holes. This product gives the car body greater rigidity and also offers a handsome finish. This can be mounted even with four-point seat belts for two-seaters.
• Looks great
• Easy to install
• Allows the use of racing harnesses
• High quality product from Japan
• Available for NA, NB & NC Miatas (1989-2015)
|,|"Select Year" "Select Here" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08) add(+$70)" "NCEC-2 (09-13) add(+$70)" "NCEC-3 (13-15) add(+$70)"|-||-|||-||BXSS-02905|,|19MAMISUANDS9|,|Mazda Miata MX-5 BLOX Racing STREET SERIES II COILOVERS 1990-2005|,|BXSS-02905|,|855.00|,|732.02|,||,||,||,||,||,||,|Mazda Miata MX-5 BLOX Racing STREET SERIES II COILOVERS 1990-2005
BLOX RACING STREET SERIES II COILOVERS
BLOX Racing is pleased to introduce its new Street Series II full-bodied coilover system.
The Street Series II Coilover system is undoubtedly the best price vs performance coilover available. It is designed to deliver maximum stance while still providing a comfortable ride. As with all BLOX Racing full-bodied coilover systems, the Street Series II system is proven to outperform other similar brands.
Each pre-assembled BLOX Racing coilover system is constructed for superior durability and are designed with specifically weighted spring rates and shock valving to offer enthusiasts unparalleled handling characteristics, while maintaining suitable ride comfort and quality. Each kit also includes new dust covers, bump stops, and spanner wrench set.
The springs used in the Street Series II Coilover system are CNC-wound SAE 9254 spring steel to ensure quality and performance. Each spring is then subjected to heat and shot peen treatment, protecting them against deformation and greatly increasing high fatigue endurance. All springs then undergo powder coating for durability and rust resistance. The high-grade materials protect against corrosion and are proven to last not only the lengthiest endurance races, season after season, but also harsh weather conditions.
STREET SERIES II COILOVER FEATURES:
-Twin-Tube Design with Fixed Shock Damping
-Adjustable Threaded Spring Perch for Ride Height Adjustments
-SAE 9254 Racing Springs (FF: 7kg/mm RR: 7kg/mm)
-Top Mounts Included
-Dyno and Cycle Tested for Performance and Reliability
-Greater High Speed Stability and Control
-Spanner Wrenches Included
VEHICLE APPLICATIONS:
-90-05 Miata
|,|"Shipping and Handling" "add(+$95)"|-||-|||-||CLUBNA-EUNOS-KEY-CHAIN|,|MIGIMOVIALL|,|Mazda Miata MX-5 Blue Leather Key Ring|,|KC1740-MIA-BLU|,|22.00|,|17.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Blue Leather Key Ring
Blue leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||MAZDA-MIATA-MX-5-BORLA-STAINLESS-STEEL-CAT-BACK-EXHAUST-2016|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Borla Rear Section Exhaust S-Type 2016+|,|11919|,|913.99|,|745.99|,||,||,|10.000 |,||,||,||,|Mazda Miata MX-5 Borla Rear Section Exhaust S-Type 2016+
New BORLA® Exhaust for the 2016 Mazda Miata (ND)!
Each BORLA® Exhaust System is built from premium 300-series austenitic stainless steel to give you the absolute best in performance and durability. We strive to provide you with the best quality products and stand behind our systems with a Million-Mile Warranty.
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAMIBOTSTSTC|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Borla Stainless Steel Cat-Back Exhaust 2006-2014|,|Borla-140169|,|1,113.99|,|877.99|,||,||,|10.000 |,||,||,||,|
Borla Stainless Steel Cat-Back Miata Exhaust 2006-2014
T-304 Stainless Steel Cat-Back™ System
BORLA Cat-Back™ exhausts feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium Aircraft-Quality T-304 Stainless Steel, an alloy superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit.
CLICK ON THE PHOTOS FOR A LARGER VIEW!
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAMIDBA40SEX|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Brake Rotor - DBA 4000 Series XS Premium Cross-Drilled & Slotted Brake Rotors|,|DBA-4530XS|,|227.39|,|195.95|,||,||,|0.000 |,||,||,||,|DBA's, Disc Brake Australia Mazda Miata rotor features Thermal Stability Profiling for improved heat handling and Thermo-Graphic paint markings for effective heat monitoring.
The XS premium cross-drilling and slotting design provides efficient braking performance on the street (for street use only).
Price is for one rotor, amd the sport rotors fit the 2004-2005 Mazdaspeed Miata.
As with every DBA rotor, the 4000 Series rotor bolts right onto the vehicle with no mechanical changes needed. DBA's enhanced-performance, slotted rotor features Thermal Stability Profiling (TSP) for improved heat handling and Thermo-Graphic paint markings for effective heat monitoring.
Thermo-Graphic markings are placed on the outer edge of each DBA 4000 series disc rotors and are used to monitor the core temperatures achieved during braking application. The markings change color as the rotor heats up to alert the driver to rotor temperatures that exceed optimum levels.
The ''Kangaroo Paw'' design features a series of 144 diamond- and tear drop-shaped pillars and columns individually spaced between the rotor faces. This system provides two key advantages. First, is the ability to cool the rotor faster than ever before. As the disc rotor rotates, aerodynamic turbulence around the individual pillars and columns is generated, increasing the force of hot air out from within the internal areas of the rotor. Second is increased dimensional stability across the disc rotor directly achieved by the individually spaced pillars and columns.
These advantages increase the disc rotor's efficiency by as much as 20% when compared to conventional rotor designs. A 20% increase in disc rotor efficiency directly translates to reduced brake operating temperatures, brake fade, disc rotor stresses, disc thickness variation, run-out and shudder. All 4000 series rotors also benefit from DBA's "Longlife Slotted" design. The rotors are manufactured to QS-9000 quality standards using premium grade materials with a high iron content and dense metal matrix resulting in long wear and safe, consistent stopping power.
Front
Rear
|,|"Select Location" "Select Here" "Front Left" "Front Right" "Rear Left" "Rear Right"|-||-|"Select Year" "Select Here" "1989-1993" "1994-2005 w/o sport Suspension" "2001-2005 w/Sport Suspension add(+$12)"|-||-|||-||MAMIDBASTGOS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Brake Rotor - DBA Street Gold Series Slotted and Cross-Drilled Brake Rotor|,|DBA-530X|,|130.83|,|89.45|,||,||,|0.000 |,||,||,||,|DBA's, Disc Brake Australia Mazda Miata street series GOLD slotted and cross-drilled rotors provide maximum cooling with an attractive, aggressive appearance.
They are the perfect replacement rotor for the performance conscious street motorist.
As with every DBA rotor, the Street Series rotor bolts right onto the vehicle with no mechanical changes needed.
Price is for one rotor. The 2001-2005 sport rotors fit the 2004-2005 Mazdaspeed Miata.
|,|"Select Location" "Select Here" "Front Left" "Front Right" "Rear Left" "Rear Right"|-||-|"Select Year" "Select Here" "1989-1993" "1994-2000 All, 01-02 W/Standard Brakes" "2001-2002 w/Sport Suspension, 2003-2005 All add(+$25)" "2006-2015 add(+$35)"|-||-|||-||MAMIDBASTSES|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Brake Rotor - DBA Street Series Slotted Brake Rotors|,|DBA-530SL|,|130.83|,|119.95|,||,||,|0.000 |,||,||,||,|DBA's, Disc Brake Australia Mazda Miata street series slotting improves pad bite and assists to reduce brake fade.
They are the perfect replacement rotor for the performance conscious street motorist.
As with every DBA rotor, the Street Series rotor bolts right onto the vehicle with no mechanical changes needed.
Price is per rotor. The 2001-2005 Sport rotors fit the 2004-2005 Mazdaspeed Miata.
|,|"Select Option" "Select Here" "1989-1993 Rear" "1989-1993 Front add(+$25)" " " "1994-2000 or 2001-2002 w/o Normal Suspension Rear add(+$25)" "1994-2000 or 2001-2002 w/o Normal Suspension Front add(+$25)" " " "2001-2002 w/Sport Suspension or 2003-2005
Rear" " " "2006-2015 Rear add(+$35)" "2006-2015 Front add(+$75)"|-||-|||-||238-700|,|20MIMIEXPA|,|Mazda Miata MX-5 Bras 2001-2005|,|238-700-MS|,|149.55|,|119.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Bras 2001-2005
NOTE: for cars without front spoiler/air dam, or factory fog lights
Our roads are littered with rocks, sand and other debris. If you drive your Miata a lot and want to keep the front end looking new, invest in one of our protective bras. Our hood bras are crafted with super quality vinyl that repels water yet still breathes to allow moisture to evaporate. The soft underside will not scratch and each bra is designed to allow hood opening without bra removal. We offer two different styles for you to choose from. Beautifully custom tailored. Will not fit vehicles fitted with aftermarket or OEM chin spoilers, front facias or body kits. Full 2-piece.
|,|||-||910-353|,|20MAMIINDA|,|Mazda Miata MX-5 Burnout Gauge Face by Revlimiter 1990-2015|,|910-353|,|159.99|,|129.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Burnout Gauge Face by Revlimiter 1990-2015
The Revlimiter Burnout Gauge Face Set for 2009-2015 Miatas blends modern design with unique styling that you'll love even more at night. These are crafted from Aerospace polymer, laser-cut and digitally screen printed, featuring an OEM textured finish, a 6 o'clock tach/speedometer zero position, and redline at 7000. There is no lighting tint baked into these gauge faces; they illuminate using the bulbs already installed in your cluster. Dummy lights below the tach (airbag, lights-up, hold) are eliminated.
Note: This kit is for Miatas with Manual transmissions only.
In the kit:
One set of genuine revlimiter gauge faces.
Pair of no-glue, push-through needle stoppers.
Pry tools to remove OEM gauge needles.
A dry dust cloth.
Pair of gloves.
One-sheet installation guidelines.
910-353, 910-358, 910-361, 910-364
|,|"Select Year" "1990-1997" "1999-2005" "2006-2008 Manual Transmission" "2009-2015 Manual Transmission"|-||-|||-||MAZDA-MIATA-TOUGERUN-CARBON-FIBER-REAR-SPOILER-1999-2005--LIMITED-EDITION-|,|NBBODYSTYLING|,|Mazda Miata MX-5 Carbon Creations Monster Wing - 3 Piece 1999-2005|,|113701|,|859.00|,|676.00|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Carbon Creations Monster Wing - 3 Piece 1999-2005
-2x2 twill weave carbon fiber
-Premium gloss, UV protectant finish
-Track-proven strength and performance
-Up to 70% lighter than OEM factory parts
-Weather-resistant aluminum mesh grille (where applicable)
|,|||-||50-66-1104|,|20MAMIEXBOST|,|Mazda Miata MX-5 Carbon Fiber Doors 2006-2014|,|50-66-1104|,|2,950.00|,|1,998.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Carbon Fiber Doors 2006-2014
These real carbon fiber doors give you superior weight savings for your track car. Beautifully finished on both the interior and exterior, these replacement doors can be painted or left as is. Use the stock hinges and your own latch. Includes both driver and passenger doors. Hardware NOT included.
These are ONE-PIECE Carbon Fiber Doors! Race part, NOT a cosmetic item, expect some work to finish and install and paint them to protect them from UV (like we did on our car in the pics here). Your factory doors are about 40 pounds each...and these weigh about nothing.
NOTE: These are hand made to order and can take up to 4 weeks to deliver.
|,|"Shipping & Handling" "add(+$349)"|-||-|||-||COLGAN-CUSTOM|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 CARBON FIBER Fabric Bra 1990-2018|,|CVC-COLGAN-CUSTOM|,|365.00|,|295.00|,||,||,||,||,||,||,|The Original Car Bra, Colgan is known for setting standards by which others are measured. Full front coverage protection for cars, trucks, vans and sport utilities. Available on early models or new models where a 2-piece would be impractical.
KEY FEATURES & BENEFITS
25 oz. Carbon Fiber Black Vinyl
Exclusive Memory Fit & UV Resistant top coat
Double stitch/double padding at critical areas strengthens & delivers a better body-hugging fit
Super soft flannel backing keeps paint scratch free
Vinyl coated hooks & padded tabs are double covered & reinforced & won't scratch
Easy installation no tools required & hooks are pre-bent
3-Year Warranty
|,|"Select Year" "Select Here" "1990-1997" "1999-2000" "1999-2000 w/Sport Package" "2001-2005 w/Sport Package" "2001-2005 w/o Sport Package" "2009-2012" "2016-2018"|-||-|||-||DG-NC2-FRONT-LIPCF|,|20MIMIEXPA|,|Mazda Miata MX-5 Carbon Fiber Front Splitter 2009-2012|,|DGM-50-66-7803|,|440.00|,|395.00|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Carbon Fiber Front Splitter 2009-2012
For the 2009-2012 Mazda Miata MX-5. This Front Splitter is give a Aggressive looks and functions!
This Front Splitter reduces the lift of the NC2 generation MX5 Miata at high speeds.
Carbon Fiber finish for very low weight with great strength. Designed for the factory standard nose...not the MazdaSpeed nose.
Can be attached in several ways...including 3M VHB tape.
|,|"Freight Shipping Cost" "add(+$95)"|-||-|||-||CM-GC1|,|NBFUELLIDS|,|Mazda Miata MX-5 Carbon Fiber Gas Lid Cover 1990|,|CM-GC1|,|119.00|,|99.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Carbon Fiber Gas Lid Cover 1990
DESCRIPTION
This lightweight carbon fiber gas lid cover sticks on your existing cover for a racing style. It has edges to really fit on the cover the best way possible.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
– Lightweight, only 20 grams
|,|"Select Year" "Select Here" "1990-1997" "1999-2005"|-||-|"Select Material" "Select Here" "Carbon Fiber" "Carbon Kevlar add(+$10)"|-||-|||-||RD2-NC-CD|,|NEW|,|Mazda Miata MX-5 Carbon Fiber GVN Style Rear Diffuser 2006-2015|,|rd2-nc-cd|,|675.95|,|569.55|,||,||,||,||,||,||,|Mazda Miata MX-5 Carbon Fiber GVN Style Rear Diffuser 2006-2015
This carbon fiber rear diffuser fits on top of the rear plastic valence on all NC2 and NC3. Made with high quality carbon fiber, it only weighs 1.4 kg.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fiber manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
|,|"Shipping and Handling" "add(+$125)"|-||-|||-||GS1-NA|,|NEW|,|Mazda Miata MX-5 Carbon Fiber Meter Hood 1990-1997|,|GS1-NA|,|310.95|,|285.05|,||,||,||,||,||,||,|Mazda Miata MX-5 Carbon Fiber Meter Hood 1990-1997
This carbon fiber gauge surround replaces the OEM panel. Gives an amazing touch to your interior. You won’t stop to look at it!!!
Please be aware that this piece is extremely complicated to manufacture. Some minor DIY could be needed to fit it properly.
|,|||-||MAZDA-MIATA-MX-5-CARBON-FIBER-RACING-HARDTOP-2006-2014|,|SHOP-BY-SALE|,|Mazda Miata MX-5 Carbon Fiber RACING Hardtop 2006-2015|,|DGM-50-66-8110|,|4,259.99|,|2,995.00|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Carbon Fiber Racing Hardtop 2006-2015
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
Yes, this is the REAL DEAL - a hard top for your MX-5 in carbon fiber! If you are building that extra lightweight track car, this is essential. MX-5 Fiberglass Racing Hardtop.
- Super light weight for racing (16-18 pounds)
- Rear non-glass shatterproof window
- Newly designed mounting brackets - lightweight aluminum, front, side and rear.
- High enough to fit large roll cages.
- Superior fit and finish
No window seals provided - this is a racing top
|,|"Side Window (L/R) and Rear Deck Seals for Hardtop" "Select Here" "No" "Yes add(+$245)"|-||-|"Freight Shipping Cost" "add(+$419)"|-||-|||-||50-66-8200|,|SHOP-BY-SALE|,|Mazda Miata MX-5 Carbon Fiber STREET Hardtop 2006-2015|,|DG-50-66-8200|,|4,250.00|,|2,995.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Carbon Fiber STREET Hardtop 2006-2015
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
This is a great hardtop top, nicely finished, and well priced, but please note that although this is a really nice hardtop, it is NOT a factory top, and does not provide quite the noise reduction that a 60 pound top with a glass window will.
NEWLY DESIGNED!! MX-5 Carbon Fiber Street Hardtop.
- Extra light weight! (18-18-20 pounds)
- Rear non-glass shatterproof window
- NEW! All new mounting brackets, lightweight aluminum. Front, side and rear.
- Molded rear non-glass window with black trim for great looks
- Side window and rear deck seals provided. These are not factory seals, but work fine to keep out the weather.
- Great fit and finish - comes with clear coat.
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||905-290|,|20MAMIINAC|,|Mazda Miata MX-5 Center Console Insert by IL Motorsport 2006-2008|,|905-290|,|145.55|,|129.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Center Console Insert by IL Motorsport 2006-2008
Since it's inception, owners of the NC MX-5 have yearned for more useable interior storage space. As with their redesigned center console for the NA Miatas, IL Motorsport has engineered a well thought out solution that creates a roomy storage compartment and removes those practically useless center cup holders. This insert is the perfect accessory to keep loose valuables from tossing about the cabin, plus it also features an integrated 12-Volt outlet for powering or charging your electronic devices. Comes complete with a dedicated wiring harness, an elongated replacement lid, and detailed instructions. Also available is a padded console cover, part number 905-293 that replaces the hard plastic lid that comes in the kit.
|,|"Select Color" "Select Here" "BLACK" "TAN"|-||-|||-||909-315|,|20MAMIINAC|,|Mazda Miata MX-5 Chrome Air Vent Surrounds by IL Motorsport - Set of 4 2006-2015|,|909-315|,|79.95|,|34.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Air Vent Surrounds by IL Motorsport - Set of 4 2006-2015
Chrome accents add elegance like no other modification. These are made from billet aluminum that is chrome plated for high luster and enduring bright finish. Most pieces install easily with 3M adhesive and include instructions where necessary.
|,|||-||916-130|,|20MAMIAUVIAN|,|Mazda Miata MX-5 Chrome Antenna Base Bezel 2006-2015|,|916-130|,|28.05|,|22.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Antenna Base Bezel 2006-2015
Great looking chrome accents add elegance and style to your Miata.Inserts attach with adhesive already supplied, antenna screws in factory location.
|,|||-||904-665|,|20MAMIINDA|,|Mazda Miata MX-5 Chrome Dash Trim Set by IL Motorsport - Set of 3 2006-2015|,|904-665|,|122.05|,|99.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Dash Trim Set by IL Motorsport - Set of 3 2006-2015
Whether you choose to continue the silver accent theme Mazda started with or change to a chrome custom look, these trim pieces won't disappoint. Machined from billet aluminum, each piece is carefully finished to exact standards. Installation is a snap with pre-applied 3M adhesive.
|,|||-||916-056|,|NAACCESSORIES|,|Mazda Miata MX-5 Chrome Door Handle Buckets by IL Motorsport 1990-2005|,|916-056|,|95.35|,|79.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Door Handle Buckets by IL Motorsport 1990-2005
Factory interior door buckets are given the royal treatment by coating them with a layer of brilliant chrome. Update your Miata in a matter of minutes with a pair of these jewels. Sold as a pair.
|,|"Select Year" "Select Here" "1990-1997" "1999-2005"|-||-|||-||902-510|,|20MAMIINDA|,|Mazda Miata MX-5 Chrome Door Pull Trim - Pair 2006-2008|,|MS-902-510|,|41.55|,|32.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Door Pull Trim - Pair 2006-2008
Chrome accents add elegance like no other modification. These are chrome plated for high luster and enduring bright finish. Most pieces install easily with 3M adhesive and include instructions where necessary.
|,|||-||909-225|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Chrome Door Speaker Ring - Pair 2006-2015|,|MS-909-225|,|69.19|,|59.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Door Speaker Ring - Pair 2006-2015
Chrome accents add elegance like no other modification. These are made from ABS plastic that is chrome plated for high luster and enduring bright finish. Most pieces install easily with 3M adhesive and include instructions where necessary.
|,|||-||MS-909-950|,|20MAMIINDA|,|Mazda Miata MX-5 Chrome Ignition Trim Ring by IL Motorsport 2006-2015|,|ms-909-950|,|44.05|,|34.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Ignition Trim Ring by IL Motorsport 2006-2015
Chrome accents add elegance like no other modification. These are made from ABS plastic that is chrome plated for high luster and enduring bright finish. Most pieces install easily with 3M adhesive and include instructions where necessary.
|,|||-||916-123|,|20MAMIINDA|,|Mazda Miata MX-5 Chrome Instrument Hood Trim by IL Motorsport 2006-2015|,|916-123|,|44.05|,|39.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Instrument Hood Trim by IL Motorsport 2006-2015
Chrome accents add elegance like no other modification. This is made from ABS plastic that is chrome plated for high luster and enduring bright finish. Most pieces install easily with 3M adhesive and include instructions where necessary.
|,|||-||909-220|,|20MAMIINDA|,|Mazda Miata MX-5 Chrome Steering Wheel Inserts by IL Motorsport 2006-2015|,|909-220|,|65.05|,|49.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Chrome Steering Wheel Inserts by IL Motorsport 2006-2015
Chrome accents add elegance like no other modification. These are made from ABS plastic that is chrome plated for high luster and enduring bright finish. Most pieces install easily with 3M adhesive and include instructions where necessary.
|,|||-||MASTMSCLOKEY|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Clear Crystals Purse Shape Key Chain|,|KC9120-MIA|,|23.99|,|18.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Clear Crystals Purse Shape Key Chain
This uniquely-designed key chain features clear rhinestones to enhance its look. Spring loaded mechanism to easily attach or detach keys.
Laser engraved car logo will never fade.
Size: 1-3/4"x1-3/4". Silver-matte finished.
Brand new high-quality licensed product.
|,|||-||COBALT-NC-ENDLINKS|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Cobalt FRONT Sway Bar End Links 1990-2022+|,|CBT-909-852|,|95.00|,|69.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Cobalt Front Sway Bar End Links 2006-2022+
These end links are heim-jointed steel with Teflon lining, and help set your car up for more neutral handling by increasing chassis deflection. Each set includes two heim-joint end links and all necessary spacers. Sold in sets of two, one set of each required for the whole car.
This is for Front Pair Only
|,|"Select Year" "Selet Here" "1990-1997 add(+$15)" "1999-2005" "2006-2015" "2016-2022+ add(+$15)"|-||-|||-||MAZDA-MIATA-MX-5-COBALT-REAR-SWAY-BAR-END-LINKS-2006-2015|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Cobalt REAR Sway Bar End Links 1990-2022|,|CBT-909-853|,|95.00|,|69.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Cobalt REAR Sway Bar End Links 1990-2022+
These Cobalt end links are heim-jointed steel with Teflon lining, and help set your car up for more neutral handling by increasing chassis deflection. Each set includes two heim-joint end links and all necessary spacers. Sold in sets of two, one set of each required for the whole car.
This is Rear Pair Only
|,|"Select Year" "Select Here" "1990-1997 add(+$15)" "1999-2005" "2006-2015"|-||-|||-||910-390|,|NEW|,|Mazda Miata MX-5 Coil & Ignitor 1999-2000|,|910-390|,|199.05|,|149.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Coil & Ignitor 1999-2000
Give your Miata the benefit of a brand new ignition coil and ignitor pack for 99-00 1.8 liter models. Switch the old and faulty coils with this I.L. Motorsports quality replacement part. Such timely restorative efforts go a long way in the upkeep of your sports car. Durable and premium quality part. Sold individually.
|,|||-||910-387|,|NEW|,|Mazda Miata MX-5 Coolant Expansion Tank 2006-2015|,|910-387|,|285.09|,|239.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Coolant Expansion Tank 2006-2015
Give your Miata the benefit of a brand new coolant tank. Switch the faulty plastic tanks prone to leakage and cracks with the durable aluminum coolant expansion tank. Highly beneficial for your NC's pressurized cooling system, this sturdy tank offers great value for money. Upgrading your coolant tank with this I.L. Motorsports replacement, makes for a very welcome addition under the hood, and adds a spiffy look to your engine bay!
The tank can be easily mounted on the OEM mounting points for very easy installation, and the hose connections can also be placed on the OEM positions. Such timely restorative efforts go a long way in the upkeep of your sports car. Sold individually.
|,|||-||MAMIMXCOFLSH|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata MX-5 CoverCraft Flex Shade™ SunScreen 1990-1997|,|CVC-UR10246|,|64.95|,|49.45|,||,||,|0.000 |,||,||,||,|High-performance radiant barrier material uses laminate construction with insulating foam and a clear mylar film on the inside. The side that faces the outside uses a metalized polyester laminate finish to reflect up to 97% of the sun's damaging UV rays.
Easy to use - just roll the shield into place and lower the sun visors. Lightweight material is easy to handle.
|,|||-||MAMIMXCOUVHE1|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata MX-5 CoverCraft UVS100™ Heat Shield 1990-2019+|,|CVC-UV10688|,|75.95|,|62.45|,||,||,|0.000 |,||,||,||,|This premium quality, custom patterned, folding heat shield has a silver reflective fabric on the outer side, soft felt on the inside. Both fabrics are laminated to a foam-core board which acts as an insulator. The silver outside facing fabric helps reflect damaging UV rays that not only heat the inside of your vehicle but also damage the interior. Your steering wheel and seats will be cooler with the use of a Heat Shield!
Easy to use - just unfold and position across the windshield surface, then fold the sun visors down to hold the shield in place.
|,|"Select Year" "Select Here" "1990-1997 (UV10246)" "1999-2005 (UV10688)" "2006-2015 (UV10968)" "2016-2019+ (UV11423)"|-||-|"Select Color" "Select Here" "Silver" "Blue Metallic (BL)" "Gold (GD)" "Green Ice (GN)" "Rose (RO)"|-||-|||-||901-7101|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Cquence Slotted & Cross Drilled Brake Rotors 1990-2022|,|901-710|,|129.99|,|98.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Cquence Slotted & Cross Drilled Brake Rotors 1990-2022
Cquence brand offers brake parts for over 2500 vehicle applications including Mazda Miatas. Moss is proud to offer this brand as a lower-cost alternative in our performance brake parts line. Machined in the USA, rotors are made from high quality G300 cast iron. Slotted rotors decrease stopping distance and eliminate brake fade. OE fit and finish, includes all OE details and standards for excellence. One Year Manufacturer Warranty on warping or cracking.
|,|"Select Year" "Select Here" "1990-1993 Rear" "1990-1993 Front add(+$10)" "1994-2000 Rear add(+$10)" "1994-2000 Front add(+$40)" "2001-2002 Rear W/Standard Brakes add(+$10)" "2001-2002 Front W/Standard Brakes add(+$40)" "2001-2002 Rear W/Factory 'Hard S' Big Brakes add(+$30)" "2001-2002 Front W/Factory 'Hard S' Big Brakes add(+$85)" "2003-2005 Rear add(+$30)" "2003-2005 Front add(+$85)" "2006-2015 Rear add(+$30)" "2006-2015 Front add(+$70)" "2016-2024 FRONT W/Blembo Brakes add(+$70)" "2016-2023 FRONT W/O Blembo add(+$70)" "2016-2023 REAR add(+$50)"|-||-|||-||909-335|,|NAACCESSORIES|,|Mazda Miata MX-5 Cushioned Arm Rest by IL Motorsport 1990-1997|,|909-335|,|69.95|,|57.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Cushioned Arm Rest by IL Motorsport 1990-1997
**1990 -1993 & 1996-1997 Driver Side Only**
Those guys I.L. Motorsport Germany have designed a very comfortable arm rest pad for the driver side of 1990 -1993 & 1996-1997 Driver Side Only. The armrest lies a little bit higher then the OEM part
and is made from high quality foam. We think that once you install it,
you will not take it off again. Long drives will be more comfortable
because the arm now finally can rest in a perfect position. The arm is
positioned near the steering wheel so you can steer very relaxed while
your arm is "resting" on the pad. There are no tools needed for
installation, the arm rest pad snaps in the OEM arm rest. The armrest
can just as easily be removed if you want to
|,|||-||900-707|,|NBINDA|,|Mazda Miata Mx-5 Custom Dash Kits 1990-2005|,|900-707|,|129.99|,|114.98|,||,||,||,||,||,||,|Mazda Miata Mx-5 Custom Dash Kits 1990-2005
Whether you choose wood, real carbon fiber or aluminum, our beautiful dash kits add style to your Miata's cockpit. State of the art manufacturing techniques allow for the thinnest, most flexible dash kits available giving you a factory installed look. High quality adhesive and UV protection ensure that these kits are a durable and lasting addition.
|,|"Select Year" "Select Here" "1990-1993" "1994-1997" "1999-2005 add(+$50)"|-||-|"Select Finish" "Select Here" "Burl Wood" "Red Burl Wood" "Cherry Rose Wood" "Honey Burl Wood" "Classcis Green Camo" "Glossy Silver" "Brushed Metal" "Brushed Aluminum" "Real Black Carbon Fiber add(+$40)" "Black add(+$20)" "White add(+$20)" "Red add(+$20)" "Burgundy add(+$20)" "Yellow add(+$20)" "
Blue add(+$20)" "Pink add(+$20)"|-||-|||-||CS-AA598|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Door Bushings 1990-2023|,|CS-AA598|,|85.55|,|69.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Door Bushings 1990-2018+
We all love the Miata, but when it comes to rigidity the car has a lot working against it. It's a two-door convertible, so the middle section is supported in part by the doors and is under a lot of stress. The soft rubber door bushings are an obvious opportunity to improve the situation. These bushings will only take you a few minutes to install, and the results will be obvious the first time you close the door.
|,|||-||MAZDA-MIATA-2DR-MAGNUM-SPOILER-1999-2003|,|NBACCESSORIES|,|Mazda Miata MX-5 Duraflex Monster Wing - 3 Piece 1999-2005|,|113702|,|495.00|,|379.00|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Duraflex Monster Wing - 3 Piece 1999-2005
-Hand laid, high quality 6 oz. fiberglass
-Signature black finish
-High quality weather resistant aluminum mesh grille (where applicable)
-Proprietary polymer blend for maximum flexibility
-Increased durability and longer service life
-Reduced damage rate up to 75%
|,|||-||61-2094|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Dust Boots to Dynapro 4 Piston Brake Kit 2016-2019|,|61-2094|,|105.15|,|88.99|,||,||,||,||,||,||,|Mazda Miata MX-5 Dust Boots to Dynapro 4 Piston Brake Kit 2016-2019
This upgrade option changes a brake kit you are purchasing from us TODAY to the Dynapro 4 piston caliper versions with dust boot seals. Price covers two calipers or one "kit".
This is an upgrade option available ONLY on the Wilwood Dynapro 4 piston brake calipers. This is available for both the black and red versions of that caliper (price is the same for both). Sorry, this is not available for 6 piston, Dynalite 4 piston, or rear 4 piston calipers. If you buy this option with a kit that is not compatible we will refund this back to you.
This price is an upgrade cost ONLY. If you buy this without purchasing a compatible brake kit from us in the same order we will refund this back to you.
Why dust boots?
Factory brake calipers use dust boot seals to keep dirt, salt and other debris from getting into the gap between the caliper piston and the caliper body which can cause premature wear. We occasionally get a call from someone asking if our brake kits have dust boot seals because the factory calipers have them and so they assume this is a feature they need to be concerned about. To be frank - nearly all Wilwood brake calipers just like all racing brake calipers, do not use dust boots to seal the caliper pistons. This is intentional and done for several reasons, including the point that rubber dust boots can catch fire under extreme brake heat. The pistons fit tightly into the caliper so they seal without the need for rubber seals. In our decades of experience with thousands of Wilwood calipers this design has proven itself completely reliable both road and race track use. HOWEVER, if despite that vote of confidence you are convinced that this is a feature you want to have in your brake caliper AND if you do not have plans for race/track use (remember that bit about the boots not being suitable for high heat) then we have made this option available for you to get the dust boot version of the brake caliper for that added peace of mind.
|,|||-||61-0306ND|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 DynaPro 6 PISTON Caliper PAIR Retrofit kit 2016-2019 |,|61-0306ND|,|825.15|,|698.00|,||,||,||,||,||,||,|Mazda Miata MX-5 DynaPro SIX PISTON Caliper PAIR Retrofit kit 2016-2019
This pair of Calipers is for those of you who ALREADY OWN OUR 4 Piston ND BIG BRAKE KIT or 4 Piston ND Caliper Upgrade Kit and want to retrofit it with the larger 6 piston calipers!
***The front calipers in this kit use the 6712 pad shape. Type "6712" into the search box on the upper left of our site to see all our pad options for this caliper.***
DP6 calipers offer the performance advantages of a larger pad and a six piston differential bore configuration, with complete bolt-on interchange ability with existing Good-Win Racing ND Big Brake kits.
In addition to the sturdy, yet stylish body, the DP6 incorporates race proven technology and the latest Wilwood performance enhancements. Pad clamping force is generated by six heavy wall STAINLESS pistons configured in a leading to trailing edge differential bore pattern. The heavy wall pistons have been engineered to fully resist backside deflection at high pressures while maintaining balanced pad loading for even wear over the length of the pad. Stainless steel resists corrosion while inhibiting direct heat transfer from the pads to caliper body, seals, and fluid. Available in high gloss black or high gloss red.
|,|||-||MAZDA-MIATA-MX-5--EIBACH-ANTI-ROLL-KIT-2016-|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Eibach Anti Roll Kit - Performance Sway Bars 2016+|,|E40-55-019-01-11|,|309.00|,|254.95|,||,||,|5.000 |,||,||,||,|Mazda Miata MX-5 Eibach Anti Roll Kit - Performance Sway Bars 2016+
Every Eibach PRO-KIT | ANTI-ROLL-KIT | PRO-SPACER is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling without ever compromising safety or ride quality. While our PRO-KIT performance springs are regarded as the primary suspension enhancement components, the Eibach ANTI-ROLL-KIT allows critical fine-tuning of your MX-5’s handling characteristics. Featuring adjustable front and rear sway bars, the MX-5 ANTI-ROLL-KIT was developed around the near perfect balance of the new Mazda chassis and allows drivers the option to fine tune the handling characteristics to their preference. Complete the system with our PRO-SPACER wheel spacers for the sleek, flush look with the benefit of added track width for higher stability in the corners—and ultimately, the most comprehensive suspension system available for the new MX-5.
ANTI-ROLL-KIT | Performance Sway Bars
* Adjustable Front and Rear Sway Bars for Improved Handling and Reduced Body Roll
* Balanced for Optimum Neutral-Steering Handling and Precise Turn-In Response
* Precision Engineered and Calibrated for the PRO-KIT Performance Spring Kit
* Million-Mile Warranty
Front: eibE40-55-019-01-10
Rear: eibE40-55-019-01-01
Both: eibE40-55-019-01-11
|,|"Select Option" "Rear Only" "Front Only add(+$45)" "Front and Rear add(+$298)"|-||-|||-||MAZDA-MIATA-MX-5-EIBACH-PRO-KIT-PERFORMANCE-SPRINGS-2016-|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Eibach PRO-KIT Performance Springs 2016+|,|E10-55-019-01-22|,|453.60|,|304.99|,||,||,||,||,||,||,|Mazda Miata MX-5 Eibach PRO-KIT Performance Springs 2016+
Every Eibach PRO-KIT | ANTI-ROLL-KIT | PRO-SPACER is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling without ever compromising safety or ride quality. While our PRO-KIT performance springs are regarded as the primary suspension enhancement components, the Eibach ANTI-ROLL-KIT allows critical fine-tuning of your MX-5’s handling characteristics. Featuring adjustable front and rear sway bars, the MX-5 ANTI-ROLL-KIT was developed around the near perfect balance of the new Mazda chassis and allows drivers the option to fine tune the handling characteristics to their preference. Complete the system with our PRO-SPACER wheel spacers for the sleek, flush look with the benefit of added track width for higher stability in the corners—and ultimately, the most comprehensive suspension system available for the new MX-5.
PRO-KIT | Performance Springs
* Lower Center of Gravity — Lowers MX-5, 0.8" Front - 0.8" Rear
* Proprietary Spring Design Developed for Excellent Ride Quality
* High Performance Handling and Aggressive Good Looks
* Million-Mile Warranty
|,|||-||MAZDA-MIATA-MX-5-ENERGY-SUSPENSION-HYPER-FLEX-SYSTEM-2016-|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Energy Suspension Hyper-Flex System 2016+|,|11-18105R|,|450.10|,|329.01|,||,||,||,||,||,||,|Mazda Miata MX-5 Energy Suspension Hyper-Flex System 2016+
Worn out or mushy factory bushings contribute to less than stellar handling. These problems are easily remedied with a Hyper-Flex polyurethane master bushing kit by Energy Suspension, whose bushings outperform and outlive standard rubber bushings. Energy Suspension, world-renowned for its innovative polyurethane suspension parts, provides enthusiasts with performance solutions engineered to last.
* Replaces old, worn out bushings or serves as an upgrade
* Come in a variety of colors
* Made of polyurethane compound that far outperforms rubber bushings
* Features an impressive lifetime warranty
* Exceeds factory standards
Highlights
* Location: Front And Rear
* Material: Polyurethane
* Color/Finish: Red
* Product Fit: Direct Fit
* Quantity Sold: Kit
* Anticipated Ship Out Time: 1-3 Business Days
* Warranty: 2-year Energy Suspension Limited Warranty
|,|||-||908-155|,|ENPE19|,|Mazda Miata MX-5 Expansion Tank 1990-2005|,|908-155|,|240.55|,|219.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Expansion Tank 1990-2005
Replace the original plastic tank with this durable aluminum expansion tank. Resilient to the effects of heat and usual wear and tear, this expansion tank fabricated from laser-cut, CNC folded aluminum sheet will last a long time and clean up the look of your engine bay! Available in the signature satin-texture black, it is totally compatible with your NA Miata and can be easily installed on factory mounting points. It utilizes the original hose. Mounting hardware included.
Features:
Full TIG welded construction
Large diameter filler neck with high quality black anodized cap
Glass sight gauge to check coolant level
|,|"Select Year" "Select Here" "1990-1997 add(+$20)" "1990-2005"|-||-|||-||MAMIFRLIPSP|,|NEW|,|MAZDA MIATA MX-5 FACTORY STYLE POLY URETHANE FRONT BUMPER LIP SPOILER 1990-1997 - Sale!|,|FRONT-LIP-001|,|299.99|,|165.55|,||,||,|5.000 |,||,||,||,|MAZDA MIATA MX-5 FACTORY STYLE POLY URETHANE FRONT BUMPER LIP SPOILER 1990-1997 - Sale!
Put a popular and sporty look on your Miata without fearing driveways! Our lip spoiler is made from strong and durable polyurethane, unlike others that are made from fragile fiberglass. Comes ready to paint or leave black as an accent.
- Durable Polyurethane
- Prefect Fitment
- Including Installation Hardware
|,|||-||ALI-175|,|NEW|,|Mazda Miata MX-5 Fiber Glass Rear Trunk Wing Spoiler 1990-1997|,|Ali-175|,|319.95|,|225.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Fiber Glass Style Rear Trunk Wing Spoiler 1990-1997
FEATURE:
FRP Fiber Glass
High Quality Fiber Glass by Vacuum Infusion
Light Weight
Perfect Fitment
Aerodynamic
|,|||-||MAZDA-MIATA-MX-5-FRONT-SPLITTER-2009-2012|,|20MIMIEXPA|,|Mazda Miata MX-5 Fiberglass Front Splitter 2009-2012|,|DGM-50-66-7703|,|399.99|,|295.00|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Fiberglass Front Splitter 2009-2012
For the 2009-2012 Mazda Miata MX-5. This Front Splitter is give a Aggressive looks and functions!
This Front Splitter reduces the lift of the NC2 generation MX5 Miata at high speeds.
Shipped with matte black finish in fiberglass for very low weight with great strength. Designed for the factory standard nose...not the MazdaSpeed nose.
This piece should be sanded, primed, and painted prior to installation. Can be attached in several ways...including 3M VHB tape.
|,|"Freight Shipping Cost" "add(+$95)"|-||-|||-||DGM-HARDTOP-NC|,|SHOP-BY-SALE|,|Mazda Miata MX-5 Fiberglass RACING Hardtop 2006-2015|,|DGM-50-66-7110|,|2,899.99|,|2,140.00|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Fiberglass Racing Hardtop 2006-2015
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
This is probably the nicest lightweight racing top you will find.
- Super light weight for racing (about 18 pounds)
- Rear non-glass shatterproof window
- Newly designed mounting brackets - lightweight aluminum, front, side and rear.
- High enough to fit large roll cages.
- Superior fit and finish
No window seals provided - this is a racing top
|,|"Side Window (L/R) and Rear Deck Seals for Hardtop" "Select Here" "No" "Yes add(+$245)"|-||-|"Freight Shipping Cost" "add(+$419)"|-||-|||-||50-66-7200|,|SHOP-BY-SALE|,|Mazda Miata MX-5 Fiberglass STREET Hardtop VERSION 3.0 2006-2015|,|DG-50-66-7200|,|2,950.00|,|2,140.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Fiberglass STREET Hardtop VERSION 3.0 2006-2015
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
MX-5 Fiberglass Street Hardtop VERSION 3.0
- Extra light weight! (18-20 pounds)
- NEW FULL SIZE REAR WINDOW (non-glass).
- Includes mounting brackets in lightweight aluminum. Front, side and rear.
- Molded rear non-glass window with black trim for great looks
- Side window and rear deck seals provided. These are not factory seals, but work fine to keep out the weather.
- Great fit and finish.
This hardtop ships via freight carrier.
This is a great hardtop top, nicely finished, and well priced, but please note that although this is a really nice hardtop, it is NOT a factory top, and does not provide quite the noise reduction that a 60 pound top with a glass window will. Also, you WILL want to paint this - it comes in a black gelcoat finish, and should be sent to a body shop for prep and paint. If you like, you can simply have it shot in a glossy clear coat, but we recommend a professional paint job to match your color scheme.
This is a great hardtop top, nicely finished, and well priced, but please note that although this is a really nice hardtop, it is NOT a factory top, and does not provide quite the noise reduction that a 60 pound top with a glass window will. Also, you WILL want to paint this - it comes in a black gelcoat finish, and should be sent to a body shop for prep and paint. If you like, you can simply have it shot in a glossy clear coat, but we recommend a professional paint job to match your color scheme.
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||MAZDA-MIATA-MX-5-FLOOR-MATS-2006-2015-BLACK|,|20MAMIINVIAL|,|Mazda Miata MX-5 Floor Mats 2006-2015 (Black)|,|NC0-5338|,|109.99|,|89.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Floor Mats 2006-2015 (Black)
Our Miata floor mats are designed to be year specific so they trace the foot rest and floor pan area correctly; this gives your 2006-2015 Miata perfect fitment like the original factory mats.
These plush premium quality floor mats are available in factory black with logo and feature a special non slip padding on the back to help prevent movement. You will be truly impressed with our quality and value.
|,|||-||AF-FOG0105|,|NBVIEWALL|,|Mazda Miata MX-5 Fog Lights, Foglamp Driving Light 2001-2006|,|AF-FOG0105|,|198.95|,|98.45|,||,||,||,||,||,||,|Mazda Miata MX-5 Fog Lights, Foglamp Driving Light 2001-2003
Fog Light Specifications:
Fits both LH (Driver Side) & RH (Passenger Side)
Bumper mounted
Replaces dealer part numbers: N066-51-680A, N06651680A
DOT (Department of Transportation) & SAE (Society of Automotive Engineers) approved
Direct replacement fog lights
Fog lights do not include bulbs or wiring
This fog driving lamp set is a great replacement and has good cost savings over a fog light set from the dealer.
Direct Fit Replacement
Direct fit replacement for OEM assembly
Trouble-free Installation
Uses same wiring as original assembly. No cutting or splicing required.
If you need both sides, please change the qty. to 2 during your check out.
|,|"Select Year" "Select Here" "2001-2003" "2004-2006 Driver's Side" "2004-2006 Passenger's Side"|-||-|||-||910-241|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Front 27mm Sway Bar by Eibach 2016-2020|,|910-241|,|340.00|,|298.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Front 27mm Sway Bar by Eibach 2016-2020
You love driving your Miata through canyons, twisty mountain back roads, or autocross competitions - make it handle even better with Anti-Roll Sway Bars from Eibach! The bars reduce body roll in corners and excessive nose-dive under braking. YouËÇÖll experience a more precise turn-in response, improved handling, and enhanced cornering grip. A great upgrade to EibachËÇÖs Pro-Kit Springs.
Features:
Front Bar: 27mm 2-way Adj, Solid. Rear Bar: 16mm 2-way Adj, Solid. Performance Tuned for Improved Handling and Reduced Body Roll Precise Turn-In Response, Improved Handling, Enhanced Cornering Grip Greasable Urethane Bushings for Increased Responsiveness Adjustable to Fine Tune to Your Driving Style Manufactured from Hi-Tensile Steel, Cold-Formed, Tempered and Shot-Peened then Powdercoated Comes Complete with Mounting Hardware and Instructions Million-Mile Warranty
|,|||-||905-325|,|NBBODYSTYLING|,|Mazda Miata MX-5 Front Fenders 1990-2005|,|905-325|,|265.95|,|239.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Front Fenders 1990-2005
Replace old rusted or dented fenders with our brand new front fenders for U.S. market Miatas. These sheet-metal stamped front-panels are crafted in Taiwan employing high grade steel and modern manufacturing processes. These are identical to the OE in form and function, and fit your vehicle perfectly.
Safeguarding the coat of your MX-5 from the chipping and scratching that happens as you kick up debris while driving, fenders house the wheels besides adding protection to the braking system and other parts located near the wheel. These aftermarket replacement body-panels can be bought individually.
|,|"Select Year" "Select Here" "1990-1997" "1999-2005 add(+$40)"|-||-|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|"Shipping & Handling" "add(+$115)"|-||-|||-||AGENCY-POWER-FRONT-LOWER-SUBFRAME-X-BRACE-MAZDA-MIATA-2006-2014|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Front Lower Brace by IL Motorsport 2006-2015|,|907-349|,|210.00|,|189.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Front Lower Brace by IL Motorsport 2006-2015
Further improves steering response.
|,|||-||99-FACTORY-STYLE-FRONT-SPORT-PACKAGE-LIP-SPOILER-FOR-MAZDA-MIATA-MX-5-2001-2005|,|NBBODYSTYLING|,|Mazda Miata MX-5 Front Sport Package Lip Spoiler 2001-2005|,|NB2-40405|,|295.00|,|229.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Front Sport Package Lip Spoiler 2001-2005
These spoilers are one of a kind. Made from Durable PU (polyurethane) and designed to look like 2001 - 2005 Sport Package Spoilers.
Fits Mazda MX-5 Miata Years: 2001, 2002, 2003, 2004, and 2005.
Not applicable for Mazdaspeed Miatas.
|,|||-||907-345|,|20MAMISUANDS1|,|Mazda Miata MX-5 Front Strut Tower Brace by IL Motorsport 2006-2015|,|907-345|,|375.95|,|319.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Front Strut Tower Brace by IL Motorsport 2006-2015
When your performance driving habits require the ultimate in chassis strengthening, look now further than the solutions from IL Motorsport. All pieces are made from lightweight aluminum to keep performance to a maximum (rear PPF bar is steel). Four pieces go under your Miata, one in the engine bay, and one in the trunk. Keeping the convertible's chassis stiff helps the rest of your performance suspension perform at it's best.
|,|||-||MAZDA-MIATA-MX5-1990-1997-FRONT-UPPER-STRUT-BAR|,|19MAMISUANDS1|,|Mazda Miata MX-5 Front Upper Strut Bar 1990-1997 SALE! |,|SB-MMX590FU|,|99.99|,|64.99|,||,||,||,||,||,||,|Mazda Miata MX-5 Front Upper Strut Bar 1990-1997 SALE!
Would you like to make your Miata feel much tighter through the turns? How about improved steering response and feel? This brace will do all that, plus get rid of that annoying cowl shake when you go over rail road tracks and drive on rough roads.
Our lightweight cast aluminum shock tower brace attaches easily in about 10 minutes using your existing shock tower bolts. No drilling is necessary! It provides substantially more rigidity while cornering. This shock tower brace will greatly improve the tightness in the front of your Miata while also making steering response feel much more crisp. We could not believe how much tighter our car felt after we installed one of these. You will love it!
NOTE: Not compatible with Racing Beat Intake, will not fit cars with the larger windshield washer container, or Abs brake system. Current model does not have the 8 holes as pictured.
|,|"Shipping Cost" "add(+$25)"|-||-|||-||MAZDA-MIATA-MX-5-FUEL-FILTER-1990-1997|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata MX-5 Fuel Filter 1990-1997|,|733289|,|48.95|,|24.05|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Fuel Filter 1990-1997
Don't ignore this important maintenance item! A clean fuel filter is important to get proper fuel delivery to your Miata's engine. You should replace your fuel filter every 30,000 miles.
|,|||-||NC10-60-960|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata MX-5 Fuel Gauge Sending Unit 1999-2005|,|NC10-60-960|,|227.95|,|158.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Fuel Gauge Sending Unit 1999-2005
|,|||-||UNDER-FLAP|,|20MAMIEXBOST|,|Mazda Miata MX-5 Garage Vary Front Under Flap 2013-2015|,|under-flap|,|459.99|,|349.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Garage Vary Front Under Flap 2013-2015
Front Diffuser (Underflap) made by Garage Vary for the NC3 (2013-2015) MX-5 Miata. It’s a flat FRP piece that fits under the OEM Front Bumper to make the look of the car flatter and improve aerodynamics.
Please allow 4-5 Weeks for production of these Garage Vary Front Under Flap 2013-2015.
|,|"Freight Shipping Cost" "add(+$175)"|-||-|||-||GAVAFRLIPSPM|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Garage Vary Glide Air Dam 2009-2012|,|NCEC-1|,|899.99|,|785.00|,||,||,|5.000 |,||,||,||,|Mazda Miata MX-5 Garage Vary Glide Air Dam 2009-2012
Front Lip made by Garage Vary to improve aerodynamics of the NC2 at the best possibe level. It comes with an integrated canard to give the most downforce possible to the vehicle.
FRP Finish
|,|"Oversized Shipping & handling fee" "add(+$275)"|-||-|||-||GARAGE-VARY-MAZDA-MIATA-MX-5-FRONT-LIP-SPOILER-NC-2008-2012|,|20MIMIEXPA|,|Mazda Miata MX-5 Garage Vary NC3 Front Spoiler 2013-2015|,|NCEC-2|,|699.99|,|575.05|,||,||,|5.000 |,||,||,||,|Mazda Miata MX-5 Garage Vary NC3 Front Spoiler 2013-2015
Front lip made by Garage Vary for the NC3 (2013-2015) MX-5 Miata to improve looks and make the bumper look lower. It flows very well with the lines of the vehicle and gives a nice and bold front look. It’s also available with an optional front splitter. Urethane Finish
|,|"Optional Splitter" "Select Here" "FRP add(+$350)" "Carbon Fiber add(+$650)" "None"|-||-|"Shipping & Handling" "add(+$175)"|-||-|||-||GV-TYPE-1-STYLE|,|NAEXVIALL|,|Mazda Miata MX-5 GV Style Front Bumper Lip Spoiler 1990-1997|,|Gv-Type-1-Style|,|175.95|,|149.95|,||,||,||,||,||,||,|Mazda Miata MX-5 GV Style Front Bumper Lip Spoiler 1990-1997
Put a popular and sporty look on your Miata without fearing driveways! Our lip spoiler is made from strong and durable polyurethane, unlike others that are made from fragile fiberglass. Comes ready to paint or leave black as an accent.
- Replica of Garage Vary Type 2 Style
- Durable Polyurethane
- Prefect Fitment
- Including Installation Hardware
|,|"Drop shipping fee" "add(+$9.00)"|-||-|||-||61-1954|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR Front 12.88" Rotor Upgrade 2016-2019 |,|61-1954|,|1,099.00|,|838.95|,||,||,||,||,||,||,|Mazda Miata MX-5 GWR Front 12.88" Rotor Upgrade 2016-2019
This is an upgrade kit for those who ALREADY have our Goodwin Racing 4 piston or 6 piston caliper kits. This adds the rotors and upgrades you to our FULL 12.88" big brake kit. This will NOT work on your car if you do not already have the caliper portion.
Replaces the stock 11" rotors with big 12.88" 2-piece rotors. Includes new brackets to place the Wilwood calipers over these larger rotors.
*** Product images may differ from actual product appearance ***
|,|"Shipping & Handling" "add(+$79)"|-||-|||-||61-1725|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR ND 12.88" Front Big Brake Kit 2016-2019|,|61-1725|,|1,729.05|,|1,598.00|,||,||,||,||,||,||,|Mazda Miata MX-5 GWR ND 12.88" Front Big Brake Kit 2016-2019
MAXIMUM brake performance - better braking response, more thermal capacity, unsurpassed longevity, lower weight, cheaper replacement costs, better looks and MORE FUN.
RIGID and ultra light 4-piston caliper for improved braking response over the standard single piston OEM brake calipers, reduced unsprung mass, wider pad selection, better looks and MORE FUN.
BIG 12.88" rotors with lightweight aluminum hats that fill the 17" wheel beatifully. Despite almost 2" larger than factory rotors these come at lower weight!
YES, we know Wilwood has their own 12.88" kit for the ND. That kit is similar to some of our early prototypes we tested while developing our own kit, and we quickly discovered problems with some of the parts used there, so we do NOT sell that kit and we do not recommend it. The Goodwin Racing 12.88" kit addresses these issues and more and is the highest quality and highest performance kit on the market for the ND.
Balance
Not all fancy red calipers are the same, our caliper piston sizing was chosen with great care to retain the superb braking balance.
Weight
Big rotors need not add massive weight! Thanks to the carefully designed scalloped aluminum rotor hats used here, these 12.88" rotors come in a half pound LIGHTER than the stock rotors per side. Combined with the weight savings from the light aluminum calipers, this adds up to this kit shedding a total of 9.3 lbs for the 4 piston kit or 6.3 lbs for the 6 piston kit.
Rotors
Our BBK uses large, slotted 12.88" Wilwood rotors for improved braking torque and TONS of thermal capacity. These rotors feature curved internal vanes and premium grade carbon iron for the highest cooling capacity and longevity possible. The lightweight aluminum hats have 12 mounting points for very even force distribution. The icing on this cake is that this rotor and hat assembly weighs in lighter than the factory 11" rotors!
GWR Exclusive
Our kit uses our own brackets designed in-house, CNC machined from the highest grade aluminum with steel thread inserts. These brackets are designed for superior strength and rigidity and feature our signature hard anodizing.
Our stainless steel braided lines are included as standard and they are the most durable and heavy duty lines on the market, custom made for us and featuring DOT fittings. Made to fit (too many competitors use general purpose lines to save cost and include lots of extra connectors to 'make it work' with the unnecessary risk of fluid leaks).
Pads
Upgrading your ND with to our Big Brake Kit gives you access to the wide and familiar selection of performance brake pads that we have decades of experience with! Replacement pad costs for these calipers are also far more affordable than for the factory calipers. Kit includes BP20 pads which are great for street/light performance use and match very well with factory pads in the rear. If you would like to swap to a different pad for more aggressive use, just shoot us an email!
Comprehensive kit includes:
* DynaPro 4 or 6 piston calipers
* BBK Mounting Brackets
* Stainless Steel brake lines
* All mounting hardware
*12.88" Slotted rotors and hats
* BP20 Street Performance Brake pads
* Wilwood high-temp brake fluid
Fitment Notes
YES, Fits under the factory 17" wheels!
Also fits all aftermarket 17" wheels that we sell here. Pictures below show SIX Piston Version.
BRIAN'S APPLICATION NOTES: Had a three day event at Mazda Raceway Laguna Seca and fried the stock size rotors on the first day (had our caliper upgrade and our two-piece rotors in stock size for first day). Fortunately we had this setup on display, changed to this 12.88 setup and ran it hard for the rest of the weekend and loved the upgrade over stock size setup. This is the setup for ultimate confidence lap after lap after lap, allowing me to pass deep in the brake zones knowing I could stomp the brakes late in turn 2 and still neatly exit the turn. Braking confidence deep in the brake zones is a luxury, and an unfair advantage, and worth the cost!
Dust Boots
We occasionally get a call from someone asking if these calipers have dust boot seals because the factory calipers have them and so they assume this is a feature they need to be concerned about. Wilwood brake calipers, just like all racing brake calipers, do not use dust boots to seal the caliper pistons. This is intentional and done for several reasons, including the point that rubber dust boots can catch fire under extreme brake heat. The pistons fit tightly into the caliper so they seal without the need for rubber seals. In our decades of experience with thousands of Wilwood calipers this design has proven itself completely reliable. These calipers are suitable for road use in all climates and conditions as well as on the race track.
|,|"Select Caliper" "Select Here" "4 Piston" "6 Piston add(+250)"|-||-|"Select Caliper Color" "Select Here" "Black" "Red"|-||-|"Shipping & Handling" "add(+$109)"|-||-|||-||61-1723|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR ND Front Premium 6 Piston Caliper Upgrade 2016-2019 |,|61-1723|,|1,125.05|,|974.99|,||,||,||,||,||,||,|Mazda Miata MX-5 GWR ND Front Premium 6 Piston Caliper Upgrade 2016-2019
SIX pistons vs. the Club Model's Brembo 4 pistons, PLUS a lower price tag, even lower weight for better ride quality, and better replacement costs! Fits over your factory 11" front rotors! Better wheel clearance than factory AND Brembo calipers.
MAXIMUM rigidity and larger pad area from this 6-piston caliper for improved braking response over the standard single piston OEM brake calipers, reduced unsprung mass, wider pad selection, better looks and MORE FUN.
Balance
Not all fancy red calipers are the same, piston size, pad size, and more all affect performance and longevity. Our caliper choice was made with great care to retain the superb braking balance.
Weight
Utilizes a Wilwood 6 piston caliper that is 3 lbs lighter than the factory caliper per corner (including brake pads). Despite more pistons this is still lighter than the factory Brembo caliper.
GWR Exclusive
Our kit uses our own brackets designed in-house, CNC machined from the highest grade aluminum with steel thread inserts. These brackets are designed for superior strength and rigidity and feature our signature hard anodizing.
Our stainless steel braided lines are included as standard and they are the most durable and heavy duty lines on the market, custom made for us and featuring DOT fittings. Too many competitors use general purpose lines to save cost and include lots of extra connectors to 'make it work' with the unnecessary risk of fluid leaks.
Pads
Upgrading your ND with our caliper package gives you access to the wide and familiar selection of performance brake pads that we have decades of experience with! Replacement pad costs for these calipers are also far more affordable than for the factory calipers. Kit includes BP20 pads which are great for street/light performance use and match very well with factory pads in the rear. If you would like to swap to a different pad for more aggressive use, just shoot us an email!
Comprehensive kit includes:
* Dynapro 6 piston calipers IN BLACK COLOR
* Mounting Brackets
* Stainless Steel brake lines
* All mounting hardware
* BP20 Street Performance Brake pads
* Wilwood high-temp brake fluid
Fitment Notes
Better wheel clearance than the factory Brembos! YES you can fit a 15" wheel at the FRONT over this kit (which you cannot do with stock brakes). Fits all aftermarket 16" and 17" wheels that we sell here. Fits factory 17" BBS wheels with no spacer (those are made to clear multi piston optional Brembo calipers) and fits standard factory 17x7 wheels with slim 3mm spacer we include in the kit.
BRIAN's APPLICATION NOTES: From the picture below you can quickly see that Mazda believes that a caliper upgrade on this platform includes BIGGER pads with the optional Brembo pad at 8.1 square inches versus the standard front OEM at 6.2 inch area pads. We agree with Mazda that size does matter here, which is why we go bigger than stock with both our four and six piston choices! Our four piston choice is 6.4 square inches vs 6.2 for stock pads, and our Six Piston upgrade with 7.3 square inches is nearly 20% more area than stock pads and the best aftermarket analogy for what Mazda does with the Brembo option. More performance comes with bigger pads and pad life is also dependent on pad size. We include the tiny Powerlite Caliper pad at the top of the picture below because we are aware a competitor offers that little caliper as their 'upgrade' and we think you should see up front how that caliper's pad size is nearly 20% smaller than even standard factory ND front pads, and dwarfed by the pad size Mazda offers in the Brembo Calipers. So if you want the best aftermarket four piston conversion, it is our kit. And if you want to best match what the factory offers with the BIG BREMBO option see our SIX PISTON Caliper conversions.
Dust Boots
We occasionally get a call from someone asking if these calipers have dust boot seals because the factory calipers have them and so they assume this is a feature they need to be concerned about. Wilwood brake calipers, just like all racing brake calipers, do not use dust boots to seal the caliper pistons. This is intentional and done for several reasons, including the point that rubber dust boots can catch fire under extreme brake heat. The pistons fit tightly into the caliper so they seal without the need for rubber seals. In our decades of experience with thousands of Wilwood calipers this design has proven itself completely reliable. These calipers are suitable for road use in all climates and conditions as well as on the race track
|,|"Select Caliper Color" "Select Here" "Black" "Red"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||61-1721|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR ND Ultralight Front 4 Piston Caliper Upgrade 2016-2019 |,|61-1721|,|995.05|,|774.95|,||,||,||,||,||,||,|Mazda Miata MX-5 GWR ND Ultralight Front 4 Piston Caliper Upgrade 2016-2019
Get Four Piston High Tech Aluminum Caliper performance on your ND Gen Miata with a MUCH lower price tag, even lower weight for better ride quality, and better replacement costs! Fits over your factory 11" front rotors! Better wheel clearance than factory AND Brembo calipers.
RIGID and ultra light 4-piston caliper for improved braking response over the standard single piston OEM brake calipers, reduced unsprung mass, wider pad selection, better looks and MORE FUN.
Balance
Not all fancy red calipers are the same, piston size, pad size, and more all affect performance and longevity. Our caliper choice was made with great care to retain the superb braking balance.
Weight
Utilizes a Wilwood 4 piston caliper that is 4.7 lbs lighter than the factory caliper per corner (including brake pads). Additionally, our kit is more than 3 pounds lighter than the factory Brembo calipers. Combine this kit with our 2-piece drop-in replacement rotors and save over 8 lbs per corner for a massive improvement in ride quality (particularly nice benefit for those upgrading to stiffer suspensions for better handling).
GWR Exclusive
Our kit uses our own brackets designed in-house, CNC machined from the highest grade aluminum with steel thread inserts. These brackets are designed for superior strength and rigidity and feature our signature hard anodizing.
Our stainless steel braided lines are included as standard and they are the most durable and heavy duty lines on the market, custom made for us and featuring DOT fittings. Made to fit (too many competitors use general purpose lines to save cost and include lots of extra connectors to 'make it work' with the unnecessary risk of fluid leaks).
Pads
Upgrading your ND with our caliper package gives you access to the wide and familiar selection of performance brake pads that we have decades of experience with! Replacement pad costs for these calipers are also far more affordable than for the factory calipers. Kit includes BP20 pads which are great for street/light performance use and match very well with factory pads in the rear. If you would like to swap to a different pad for more aggressive use, just shoot us an email!
Comprehensive kit includes:
* Dynapro 4 piston calipers
* Mounting Brackets
* Stainless Steel brake lines
* All mounting hardware
* BP20 Street Performance Brake pads
* Wilwood high-temp brake fluid
Fitment Notes
YES you can fit a 15" wheel at the FRONT over this kit (which you cannot do with stock brakes). Fits all aftermarket 16" and 17" wheels that we sell here. Fits factory 17" BBS wheels with no spacer (those are made to clear multi piston optional Brembo calipers) and fits standard factory 17x7 wheels with slim 3mm spacer we include in the kit.
BRIAN's APPLICATION NOTES: From the picture below you can quickly see that Mazda believes that a caliper upgrade on this platform includes BIGGER pads with the optional Brembo pad at 8.1 square inches versus the standard front OEM at 6.2 inch area pads. We agree with Mazda that size does matter here, which is why we go bigger than stock with both our four and six piston choices! Our four piston choice is 6.4 square inches vs 6.2 for stock pads, and our Six Piston upgrade with 7.3 square inches is nearly 20% more area than stock pads and the best aftermarket analogy for what Mazda does with the Brembo option. More performance comes with bigger pads and pad life is also dependent on pad size. We include the tiny Powerlite Caliper pad at the top of the picture below because we are aware a competitor offers that little caliper as their 'upgrade' and we think you should see up front how that caliper's pad size is nearly 20% smaller than even standard factory ND front pads, and dwarfed by the pad size Mazda offers in the Brembo Calipers. So if you want the best aftermarket four piston conversion, it is our kit. And if you want to best match what the factory offers with the BIG BREMBO option see our SIX PISTON Caliper conversions.
Dust Boots
We occasionally get a call from someone asking if these calipers have dust boot seals because the factory calipers have them and so they assume this is a feature they need to be concerned about. Wilwood brake calipers, just like all racing brake calipers, do not use dust boots to seal the caliper pistons. This is intentional and done for several reasons, including the point that rubber dust boots can catch fire under extreme brake heat. The pistons fit tightly into the caliper so they seal without the need for rubber seals. In our decades of experience with thousands of Wilwood calipers this design has proven itself completely reliable. These calipers are suitable for road use in all climates and conditions as well as on the race track.
|,|"Select Caliper Color" "Select Here" "Black" "Red""|-||-|"Do you want a Spacer?" "Select Here" "Yes add(+$15)"|-||-|"Shipping & Handling Fee" "add(+$89)"|-||-|||-||61-1968|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR ND Ultralight Rear 4 Piston Caliper Upgrade 2016-2019|,|61-1968|,|915.02|,|798.98|,||,||,||,||,||,||,|Mazda Miata MX-5 GWR ND Ultralight Rear 4 Piston Caliper Upgrade 2016-2019
Upgrade your rear brakes to lightweight and rigid 4-Piston calipers, AND keep your parking brake! Great match to the Brembo front brakes or any of our own front caliper upgrades or big brake kits. Fits right over your factory rotors, no need to change rotors to run this kit (photo shows installed with our rear Superlight wave rotors, available separately on this site).
RIGID and ultra light 4-piston caliper for improved braking response over the standard single piston OEM brake calipers, reduced unsprung mass, wider pad selection, better looks and MORE FUN.
Comprehensive kit includes:
* Powerlite 4 piston calipers with parking brake
* CNC Aluminum Mounting Brackets
* Stainless Steel brake lines
* All mounting hardware
* BP20 Street Performance Brake pads
* Wilwood high-temp brake fluid
Weight
This caliper kit is 4 lbs lighter per side than the factory caliper. Combine this kit with our scalloped 2-piece drop-in replacement rotors shown in the photo above and save over 12 lbs of unsprung weight in the rear!
BRIAN'S APPLICATION NOTES: I love the combo of our front and rear caliper conversions, braking from speed is much improved, looks are improved, even ride quality is much better because unsprung weight is reduced a lot. But there is one compromise in using this style of caliper in the rear, the parking brake function is not near as effective as stock parking brake. I learned to always curb the wheels when I first learned to drive but that becomes double important here because the parking brake is not as effective as stock parking brake. So, the other way to go is some folks do front and rear light two-piece rotors, front caliper conversion, and use our RED caliper paint to make the rear stock caliper RED so it better matches the front new calipers while still keeping full stock parking brake function.
Dust Boots
We occasionally get a call from someone asking if these calipers have dust boot seals because the factory calipers have them and so they assume this is a feature they need to be concerned about. Wilwood brake calipers, just like all racing brake calipers, do not use dust boots to seal the caliper pistons. This is intentional and done for several reasons, including the point that rubber dust boots can catch fire under extreme brake heat. The pistons fit tightly into the caliper so they seal without the need for rubber seals. In our decades of experience with thousands of Wilwood calipers this design has proven itself completely reliable. These calipers are suitable for road use in all climates and conditions as well as on the race track.
*** Product images may differ from actual product appearance ***
|,|"Select Caliper Color" "Black" "Red"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||61-1811|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR Race 11" 2-Piece FRONT Rotors - Slotted 2016-2019 |,|61-1811|,|595.05|,|549.02|,||,||,||,||,||,||,|Mazda Miata MX-5 GWR Race 11" 2-Piece FRONT Rotors - Slotted 2016-2019
Saves 3 lbs PER SIDE! This full assembly is 10.1 lbs compared to the factory 13.1 lbs front rotor.
These "Motorsport" 2-piece rotors include custom lightweight aluminum hats built for us by Wilwood combined with a premium grade rotor with high vane count for the greatest cooling and longest life under severe track use.
2-piece front rotor upgrade in the same size as the factory 11" rotor for a "drop in" fit for 2016 MX5s. These rotors work with the factory front calipers AND our own 4-piston and 6-piston high performance caliper kits.
NOTE for Club model Brembo calipers: These rotors are designed first and foremost to fit the standard factory caliper and our own caliper kits. These rotors WILL fit with the Brembo caliper but may need a bit of grinding on the caliper and/or the brake pad's backing plate so they clear this rotor's center hat. We ask that you ONLY attempt to fit these rotors with the Brembo caliper if you're comfortable with adjusting clearances slightly with a grinding tool.
ROTOR TYPE: Slotted
Uses a premium 72-vane friction ring compared to the factory's 50 vane standard rotor for superior performance in competition and track use:
* Greater cooling
* Less Distortion/warping
* Longest life
* Greater consistency
Price is for TWO rotor/hat assemblies
*** Product images may differ from actual product appearance ***
|,|"Shipping & Handling" "add(+$69)"|-||-|||-||61-2050|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR Replacement 12.88" Rotor Rings 2016-2019|,|61-2050|,|275.15|,|229.00|,||,||,||,||,||,||,|Mazda Miata MX-5 GWR Replacement 12.88" Rotor Rings 2016-2019
Price is for ONE rotor. Shipped in matching Left and Right pairs when you order two, unless you request otherwise. These are replacement rings ONLY for the 12.88" Big Brake Kit. Do not buy these if you do not already have a BBK.
These are Goodwin Racing spec rotors, as included in our 12.88" BBK. Premium quality iron, curved internal vane design, heat treated for longevity under hard use, with slotted face.
Yes, these friction rings fit both our GWR 12.88" BBK, and they also fit the Wilwood brand 12.88" BBK for a higher quality (and lower cost) alternative to Wilwood's rotors.
*** Product images may differ from actual product appearance ***
|,|||-||61-1801|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR Superlight 11" 2-Piece FRONT Rotors 2016-2019|,|61-1801|,|525.02|,|499.95|,||,||,||,||,||,||,|GWR Superlight 11" 2-Piece FRONT Rotors 2016-2019
Saves 4.4 lbs PER SIDE! This full assembly is 8.7 lbs compared to the factory 13.1 lbs front rotor.
2-piece front rotor upgrade in the same size as the factory 11" rotor for a "drop in" fit for 2016 MX5s. These rotors work with the factory front calipers AND our own 4-piston and 6-piston high performance caliper kits.
NOTE for Club model Brembo calipers: These rotors are designed first and foremost to fit the standard factory caliper and our own caliper kits. These rotors WILL fit with the Brembo caliper but may need a bit of grinding on the caliper and/or the brake pad's backing plate so they clear this rotor's center hat. We ask that you ONLY attempt to fit these rotors with the Brembo caliper if you're comfortable with adjusting clearances slightly with a grinding tool.
ROTOR TYPE: Plain face
Uses an ultralight 30-vane friction ring with a plain face for maximum weight saving.
ROTOR STYLE: Slotted
Uses an ultralight 30-vane friction ring with a slotted face for maximum weight saving.
This kit is centered around custom aluminum hats built for us by Wilwood to utilize lightweight rotors with affordable replacement costs. Hardware included.
* Reduced rotational mass
* Affordable rotor replacements
* 2-piece design resists warp/flex and brake drag under high heat much better than solid 1-piece rotors
Price is for TWO rotor/hat assemblies.
*** Product images may differ from actual product appearance ***
|,|"Select Rotor Style" "Plain Face" "Slotted"|-||-|"Shipping & Handling" "add(+$59)"|-||-|||-||61-1808|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 GWR Superlight 11" 2-Piece REAR Rotors 2016-2019|,|61-1808|,|595.00|,|539.00|,||,||,||,||,||,||,|Mazda Miata MX-5 GWR Superlight 11" 2-Piece REAR Rotors 2016-2019
Weight in the wheels and brakes is where it matters most, this is where every pound saved makes a difference. Improve both ride quality and performance all at once with our lightweight rotors! 2-piece rear rotor upgrade in the same size as the 11" factory rear rotor for a "drop in" fit. These rotors work with the factory rear calipers.
Plain and slotted rotor styles saves 1 lb per side compared to the stock rear rotor. Wave rotor style saves 2.5 lbs per side! Wave rotors are commonly found on motorcycles where weight savings is paramount. Our wave rotors function like stock but weigh much less!
This kit is centered around lightweight aluminum hats built for us by Wilwood. Uses a premium grade iron friction ring. Hardware included.
* Reduced rotational mass
* Affordable rotor replacements
* More thermally stable 2-piece design resists warp/flex and brake drag under high heat much better than solid 1-piece rotors
Price is for TWO rotor/hat assemblies.
These friction rings are MADE TO ORDER - allow 2-3 weeks from time of order.
INSTALL NOTES: Minor grinding of the factory brake caliper's bracket is needed for clearance between the bolt heads on the back of this rotor and the caliper bracket.
*** Product images may differ from actual product appearance ***
|,|"Select Rotor Style" "Plain Face" "Slotted add(+$55)" "Wave add(+$170)"|-||-|"Shipping & Handling" "add(+$69)"|-||-|||-||MAMIMXHAXEHI|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata MX-5 Halo Headlight Conversion Kit (Pair) - 1990-1997 - Sale!|,|PSL-6024|,|149.99|,|129.02|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Halo Headlight Conversion Kit (Pair) - 1990-1997
The Mazda Miata MX-5 Halo Headlight Conversion Kit features:
* Two 7" Round Diamond cut sealed beam conversion housings with Halo's
* Two H4 bulbs rated at 65/55 Watts, with an output of 90/100 Watts (Will not harm your cars factory wiring)
* Two rubber covers (to keep the housings dry)
* Plug and play no rewiring is necessary
* Halo's can easily be wired to your parking lights, turn signals, or to a seperate switch
This kit really lights up the road better than traditional halogen sealed beams.
You'll notice a significant increase in lighting. Your Miata will light up the road like it never has before! Now you can have your Miata project a clean bright white light with a bluish glow just like the newer luxury cars
|,|"Select Color" "Select Here" "Blue" "White"|-||-|||-||NC0-0024C|,|20MAMIINKN|,|Mazda Miata MX-5 Handbrake Handle I.L.Motorsport NC 2006-2015|,|910-425|,|85.95|,|75.85|,||,||,||,||,||,||,|Mazda Miata MX-5 Handbrake Handle I.L.Motorsport NC 2006-2015
Made in Germany by I.L Motorsport, these brake handles feature a classic Chrome finish or Anodized Silver finish that is both sporty and luxurious. A quick and easy mod for your hot rod!
|,|"Select Color" "Select Here" "Chrome" "Silver"|-||-|||-||CYBUL-HARNESS-|,|NEW|,|Mazda Miata MX-5 Harness Bar 1990-2005|,|909-0803|,|298.00|,|229.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Harness Bar 1990-2005
This product allows the mounting of the shoulder part of 4-point safety belts. It comes with an alloy sleeve required for proper mounting.
100% bolt-on solution – no welding, cutting, and drilling is required.
Powder-coated black. When purchased with roll bar, we’ll powder coat it for you in the same color as a roll bar.
|,|||-||HWKHB898Z-572|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Hawk Performance Ceramic Brake Pads - Front 2016-2021|,|HWKHB898Z-572|,|169.95|,|129.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Hawk Performance Ceramic Brake Pads - Front 2016-2021
Hawk Performance Ceramic
Hawk understands the needs of today's ceramic brake pad users and has specifically formulated our composite material to meet - and beat - the stringent low noise, ultra-low dust performance standards they have set. Engineered to reduce brake NVH (Noise, Vibration and Harshness),Hawk PC (Performance Ceramic) is a premium disc brake pad that delivers excellent performance mile after mile. Providing a linear friction profile that allows your vehicle's ABS system to operate most effectively, the unique compound has the advantage of never sacrificing power to achieve traditional ceramic pad attributes. With Hawk's PC, you can expect reduced brake pad wear, longer rotor life, and our quietest ride ever.
Expert Opinion
The Hawk PC (Performance Ceramic) is a great compound when your top priority is to minimize brake dust. This compound is a very popular replacement for OEM Brembo packages supplied on performance vehicles such as Corvettes, Mustangs, Challengers, Chargers, Subaru STI, and many others. If you are not looking to have increased brake performance over the stock level and want to virtually eliminate brake dust, the Hawk Performance Ceramic is what you are looking for.
Hawk Performance Ceramic Compound Characteristics:
Extremely Quite
Ultra-low Dust
Improved Stopping Power
Gentle on rotors
Stable Friction Output
100-650 Deg F Operating Temperature Range
100-450 Deg F Optimal Temperature Range
|,|||-||HWKHB898W-572|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Hawk Performance DTC-30 Brake Pads - Front 2016-2021|,|HWKHB898W-572|,|198.02|,|157.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Hawk Performance DTC-30 Brake Pads - Front 2016-2021
Hawk Performance DTC-30
DTC-30 is a controllable torque, multi-purpose compound, proven effective in a range of series. It delivers superior release characteristics and smooth pedal feel and initial bite for dirt and circle tracks, NASCAR modified, drag racing, trophy trucks, pro buggies, and more.
Expert Opinion
In addition to the applications mentioned above, the DTC-30 compound is often used on the rear axle of smaller race vehicles. Competitive racers of the Miata or S2000 will often choose DTC-30 for the rear axle paired with DTC-60 on the front. DTC-30 will also find itself on both axles of street driven vehicles when braking performance is top priority and owner is willing to sacrifice cleanliness and lack of brake noise.
Hawk Performance DTC-30 Race Compound Characteristics:
Consistent, Smooth Braking
Effective when Cold
100-1200 Deg F Operating Temperature Range
100-800 Deg F Optimal Temperature Range
|,|"Select Option" "Select Here" "Front without Brembo add(+$10)" "Front without Brembo add(+$110)" "Rear with/without Brembo"|-||-|||-||HWKHB898G-572|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Hawk Performance DTC-60 Brake Pads - Front 2016-2021|,|HWKHB898G-572|,|269.99|,|163.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Hawk Performance DTC-60 Brake Pads - Front 2016-2021
Hawk Performance DTC-60
Running with extremely high deceleration rates and increased downforce poses different challenges, so Hawk designed DTC-60 race compound. Recommended with DTC-70 when split friction between axles is desired, it has excellent modulation and release characteristics.
Expert Opinion
DTC-60 has the same temperature range as DTC-70, but produces less brake torque. Many racers of lighter, smaller cars such as the Miata and S2000 will run DTC-60 Front and DTC-30 Rear. On larger, heavier, cars such as Corvettes, Mustangs, Porsches, BMWs and other specialty race cars, the DTC-60 is run on the rear with DTC-70 up front. This is not an entry level race compound and should not be driven on the street. Use when you are a serious racer with track experience and have had issues with less aggressive compounds overheating or not providing enough bite.
Hawk Performance DTC-60 Race Compound Characteristics:
Superior Release and Torque Control
Very Low Pad and Rotor Wear
High Torque
Excellent Modulation and Release Characteristics
Applicable to NASCAR, NASCAR modified, ARCA, Super Late models, pavement circle track, Pro 2, Pro 4 Off Road Trucks, Pro Lite, Sports Car, GT, GS, Open Wheel, Formula, Monster Trucks
Stable Friction Output
400-1600 Deg F Operating Temperature Range
600-1200 Deg F Optimal Temperature Range
|,|"Select Option" "Select Here" "Front without Brembo add($50)" "Front with Brembo add($160)" "Rear with/without Brembo"|-||-|||-||HWKHB898B-572|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Hawk Performance HPS 5.0 Brake Pads 2016-2021|,|hwkhb898b-572|,|169.95|,|131.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Hawk Performance HPS 5.0 Brake Pads - Front 2016-2021
Hawk Performance HPS 5.0
For years, engine builders have been pushing motors to the limits of their ability, and at Hawk Performance, we're closer than ever to pushing the ABS Rev Limiter to its limits. The Hawk HPS 5.0 (High Performance Street 5.0) brake pad compound gives your vehicle the greatest possible stopping power and pedal feel without compromising ABS. HPS 5.0 is a Ferro-Carbon compound that provides advanced braking characteristics to enhance the driving experience. This compound combines the safety and quality of aerospace design with the braking technology of motorsports. The results are shorter stopping distances, improved performance under heavy braking conditions, and street car friendly characteristics.
Expert Opinion
The Hawk HPS 5.0 is a good choice if you are looking to increase your street performance to the maximum level possible without suffering the adverse side effects of noise and large amounts of brake dust commonly associated with higher performance pads. The HPS 5.0 will provide increased brake torque and operating temperature when compared to the Hawk HPS compound. The HPS 5.0 compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS 5.0 compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. The HPS 5.0 Compound will be cleaner than most OEM Pads, but produce more brake dust than the Hawk Ceramic and Hawk HPS.
Hawk HPS 5.0 Compound Characteristics:
Aggressive Torque
Great Rotor and Pad Wear
Smooth, Predictable Control
High Rates of Deceleration
Consistent Release Characteristics
100-750 Deg F Operating Temperature Range
100-550 Deg F Optimal Temperature Range
|,|"Select Option" "Select Here" "Front without Blembo" "Front with Blembo add(+$90)" "Rear with/without Blembo"|-||-|||-||HWKHB548F-590|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Hawk Performance HPS Brake Pads 2016-2021|,|HWKHB548F-590|,|169.99|,|134.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Hawk Performance HPS Brake Pads 2016-2021
Hawk Performance HPS
Hawk HPS (High Performance Street) brake pads are world renowned for increasing stopping power on your street driven vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance's HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology. The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you'll have a highly durable brake pad with less brake dust.
Expert Opinion
The Hawk HPS compound, in most cases, will provide increased brake torque and operating temperature when compared to OEM pads. There will also be a decrease in brake dust. With an upper end operating temperature of 800-900 Deg F, the HPS compound can withstand light track use as long as you are aware of the signs of over-heating and allow proper cool off time when the pads approach their upper temperature. The Hawk HPS compound is not a race compound and it can not withstand prolonged race sessions at high temperatures. Concerning brake dust, the HPS will be cleaner than your OEM Pads, but create more dust than the Hawk Ceramic compound. The performance improvement over Hawk Ceramic comes at the cost of increased dust production.
Hawk HPS Compound Characteristics:
Smooth braking Feel
Excellent for Spirited Driving
Gentle on Pads and Rotors
Consistent Release Characteristics
Increased Stopping Power
100-700 Deg F Operating Temperature Range
100-500 Deg F Optimal Temperature Range
|,|"Select Option" "Select Here" "Front with Brembo add(+$70)" "Rear with Brembo"|-||-|||-||904-663|,|20MAMIINDA|,|Mazda Miata MX-5 Hazard Switch Covers by IL Motorsport 2006-2015|,|904-663|,|34.55|,|28.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Hazard Switch Covers by IL Motorsport 2006-2015
Whether you choose to continue the silver accent theme Mazda started with or change to a chrome custom look, these trim pieces won't disappoint. Machined from billet aluminum, each piece is carefully finished to exact standards. Installation is a snap with pre-applied 3M adhesive.
|,|"Select Color" "Select Here" "Silver" "Chrome"|-||-|||-||MIHECO90|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata MX-5 Heater Core 1990-1993|,|OEM-NA01-61-A10|,|602.75|,|474.02|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Heater Core 1990-1993
|,|||-||MAZDA-MIATA-MX-5-INVIDIA-Q300-EXHAUST-2015-2017|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Invidia Q300 Exhaust 2015-2020|,|invHS15MX5GT1GT|,|795.00|,|619.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Invidia Q300 Exhaust 2015-2020
Product Information
Invidia produces high performance parts for today's hottest tuner cars. Invidia knows that automotive enthusiasts are constantly looking for ways to extract more power from their engines and improve the driving experience. Using only the highest quality materials Invidia manufactures components that improve performance while remaining stylish. Invidia manufactures their exhaust systems specifically for each application to guarantee precise fitment and power gains. Invidia has applied their knowledge of automotive performance to a myriad of makes and models constantly refining and improving their product and design process. Invidia offers several exhaust system product lines to meet the expectations of nearly any automotive enthusiast.
Invidia catback exhaust systems are designed specifically to improve performance, they achieve this by reducing bends in the exhaust system, using larger diameter piping. The reduced restriction also gives your vehicle a more aggressive tone for the sport enthusiast to enjoy. This improves throttle response, torque, horsepower and the overall driving experience. Catback exhausts are one of the most popular mods amongst casual and hardcore automotive enthusiasts alike. Their affordability, increase in performance, improved sound, and ease of installation make catback exhaust systems a perfect modification for nearly any vehicle.
For a good balance of price and performance, Invidia offers their N1 catback exhaust systems. Invidia N1 exhaust systems are constructed with high-quality SUS304 stainless steel, CNC-machined flanges, and manufactured with a polished finish. Each system features mandrel-bent stainless steel piping for maximum exhaust flow and reduced back pressure. These exhausts are engineered to produce strong mid to top-end power gains, as well as provide an increase in horsepower and torque. Aside from the increase in power and torque, a N1 catback exhaust will deliver a more aggressive tone for the driving enthusiast to enjoy. N1 catback exhaust systems are also available with a variety of tips to suit your individual taste.
Features:
* Pipe Diameter: 60mm
* Tip Diameter: 101mm
* More aggressive tone than stock system
* SUS304 stainless steel construction
* Provides additional horsepower and torque over stock
system
* CNC machined flanges
Fitment: Mazda MX-5 Miata 2015-2017
Notes: Pictures used for marketing purposes only, actual product may vary
|,|"Shipping Cost" "add(+$89)"|-||-|||-||CS-AB144-M|,|NEW|,|Mazda Miata MX-5 Jam Handle 1990-2018+|,|CS-AB144-M|,|29.99|,|24.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Jam Handle 1990-2018+
With the Jam Handle, you can keep this calamity a thing of the past. Using an automotive grade 3M adhesive backing, it simply sticks to the flat spot on your door jamb, just above the door latch. This allows you to close the door without the need to touch the outside surface, avoiding any fingerprints on your freshly cleaned ride. The Jam Handle is made in USA and comes in a 2-Hole configuration that fits prefectly on the ND Miata (and probably any other Miata). Putting adhesive tape on your paint sounds scary right? Don't worry, the adhesive is designed specifically for automotive use, and can be easily removed leaving zero evidence that it was ever there.
|,|||-||CAR-ID-KRAFTWERKS|,|20MAMIENPESU|,|Mazda Miata MX-5 Kraftwerks Supercharger Complete System 2006-2015|,|car-id-kraftwerks|,|5,450.00|,|4,850.00|,||,||,||,||,||,||,|Mazda Miata Kraftwerks® - Supercharger Complete System 2006-2015
Supercharger Complete System by Kraftwerks®. Large, Front-Mount Intercooler to help ensure low intake air temperatures for optimal performance; All necessary Aluminum Tubing, Silicone Couplers, and Clamps for easy installation, Optional Fuel and Engine Tuning. The Supercharger Kit by Kraftwerks will provide your engine with highly efficient and reliable supercharging as it is based on traction drive technology, which ensure top safety, reliability and best performance. The kit include all needed components to ensure safe and reliable operation.
Features:
Rotrex C30-84 Supercharger Unit:
Ultra high efficiency;
Silent operation;
Low operating temperatures;
Self contained lubrication and cooling system;
High reliability.
Optional Fuel and Engine Tuning:
Optional EcuTek Tuning package;
Base Maps Developed in Collaboration with Moto-East;
550 cc/min Grams Performance Fuel injectors;
265 lph Grams Performance Fuel Pump;
Independent Drive System;
Does not share belt with engine accessories for greater reliability;
If the drive belt breaks, you won’t be left stranded;
Allows for more flexible offset supercharger placement;
Toothed Belt System:
Zero slip under the heaviest loads and hardest accelerations.
Offset Supercharger Placement:
Allows for greater clearance around belts, thus reducing chances for rubbing;
Allows for simple and more efficient tubing layout;
No poorly designed, inefficient and goof-looking custom hoses/tubing into the throttle body.
Improved Water pump Belt Routing:
Improved support on custom nose pulley for water pump;
Increased traction and efficiency of water pump.
Optimized Tubing and Intercooler Layout:
2.5” mandrel bent aluminum hot side tubing into intercooler made possible because of newly designed washer bottle (included);
3.0” mandrel bent aluminum cold side tubing into throttle body made possible because of independent drive and offset supercharger
configuration;
8 Row, 3.5" thick Intercooler;
Intercooler good up to 460whp.
Ease of Installation and Tuning:
Simple bolt-on installation. No cutting, drilling, or welding;
4.5 hours installation time (approximate);
Kits sold with or without tuning.
Want to ensure 100% reliable supercharging, the Supercharger Kit is just what you need. Based on Rotrex supercharging technology and include all needed components for the complete installation. The standard kit comes complete with front-mount intercooler that ensures low temperature of the intake air and provides high performance at the same time. Top grade aluminum tubing, clamps and silicone couplers provide easy installation and to ensure the appropriate ratio of air and fuel the system is provided with DeatschWerks 255 lph fuel pump, boost dependent fuel pressure control and Grams Performance 310cc/min. fuel injectors. The fuel injector adapters ensure no problems with connection making it easy and convenient. Each Kraftwerks supercharger system ensures quick throttle response, reduce in cylinder pressure, high reliability and compact design to fit multiple applications.
All Rotrex superchargers are based on revolutionary traction drive technology, which provides ordinary gear transmissions with many advantages such as torque-on-demand, up to 250.000 rpm speed, up to 98% efficiency, compact design, affordable cost, etc. The power is provided through friction between the specific rolling bodies resulting in numerous advantages. Traction technology requires the precise fitment of every component while ensuring the transient response and emissions reduce as well. Rotrex superchargers use elastic annulus with a small pre-span, which ensure save contact between the sun shaft and the roller planet with appropriate force. The specific traction fluid ensures an increase in performance and the patented “ramp effect” provides more efficiency and durability in the transmission.
Kraftwerks Performance Group® is proud to bring you the most advanced supercharger system available. At the core of each Kraftwerks supercharger kit is the revolutionary and patented Rotrex, traction-drive supercharger. The proprietary design allows for reduced weight; smaller, quieter, cooler operation; and shaft speeds in excess of 200,000 rpm. No other forced induction method can compare to Rotrex’s superior efficiency, unmatched performance, reduced emissions, and transient response. Each Kraftwerks supercharger kit is designed in-house at our state-of-the-art, Norco, Calif., facility with applications available for a variety of vehicles.
|,|"Do you want EcuTek Tuning Package?" "Select Here" "No" "Yes add(+$900)"|-||-|"Select Drive Housing" "Select Here" "Silver" "Black add(+$100)"|-||-|"Shipping and Handling" "add(+$199)"|-||-|||-||MAMIMXCOMMSE1|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 LEBRA Custom Front End Cover Bra 1990-2012|,|CVC-LEBRA|,|189.95|,|136.02|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 LEBRA Custom Front End Cover Bra 1990-2012
NOTE: for cars without front spoiler/air dam, or factory fog lights
When you need custom protection that fits great, looks awesome and is very affordable...look no further than LeBra! Each LeBra is specifically designed to your exact vehicle model. If your model has fog lights, special air-intakes or even pop-up headlights, there is a LeBra for you. There's nothing uglier than chipped paint from rocks and road debris damage. A LeBra Custom Front-End Cover is the easiest way to protect your vehicle from unexpected road damage. Its stylish protection makes your vehicle look great!
|,|"Select Year" "Select Here" "1990-1997" "1999-2000" "1999-2000 w/Sport Package" "2001-2005 w/o Appearance Package" "2009-2012 w/o Appearance Package"|-||-|||-||910-308|,|NEW|,|Mazda Miata MX-5 Lightweight Pulley Kit by Cravenspeed 2016-2023|,|910-308|,|339.05|,|319.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Lightweight Pulley Kit by Cravenspeed 2016-2023
Crank, Alternator, Water Pump Pulley Set for 2.0L Engine
This 3pc lightweight pulley set is designed to shave weight, and free up power that would otherwise be used to spin heavy factory pulleys. The pulleys included in this set will replace the stock crank, water pump, and alternator pulleys. They are stock diameter so factory belts can be installed. Total weight savings vs stock: 3.425lbs. Made in the USA.
|,|||-||MAZDA-MIATA-MX-5-1990-1997-NA-LOWERING-SPRINGS|,|19MAMISUANDS|,|Mazda Miata MX-5 Lowering Springs 1990-1997 NA |,|LS-SKM64|,|135.99|,|104.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Lowering Springs 1990-1997 NA
Approx Drop: 1.1" (27.94mm) Front / 0.9" (22.86mm) Rear
Spring Rate: 235lbs (4.19kg) Front / 168lbs (3kg) Rear
|,|"Shipping cost" "Add(+$30)"|-||-|||-||GENUINE-MAZDASPEED-OEM-BLACK-LICENSE-PLATE-2016|,|MIGIMOVIALL|,|Mazda Miata MX-5 MazdaSpeed Black License Plate|,|BLMS|,|49.95|,|37.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 MazdaSpeed Black License Plate
These high quality stainless steel License Plate Frames are now available with highly detailed laser etched graphics. Universal fit and easy mounting application include complementing hardware hider caps to complete the look of the vehicle. Select Frames are available in black powder coat finish.
|,|||-||MIRROR-BRA---BLACK-CRUSH-FABRIC|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Mirror Bra - BLACK CRUSH, CARBON FIBER Fabric 1990-2019 *SALE* |,|CVC-Mirror-Bra|,|116.99|,|96.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Mirror Bra 1990-2019
Black Crush Vinyl protects side-view mirrors from chips, dings and scratches. Constructed from 25 oz. UV-resistant vinyl with a soft flannel backing. No drilling or tools required. Sold in pairs.
- A unique way to accessorize your vehicle with sporty mirror covers!
- Double stitch/double padding at critical areas strengthens & delivers a better body-hugging fit
- Super soft flannel backing keeps paint scratch free
- Vinyl coated hooks & padded tabs are double covered & reinforced & won't scratch
- Easy installation no tools required & hooks are pre-bent
|,|"Select Material" "Select Here" "BLACK CRUSH Fabric" "CARBON FIBER Fabric add(+$15)"|-||-|"Select Year" "Select Here" "1990 Base" "1991-1993 Base" "1991-1993 LE" "1994-1997 Base" "1994-1997 M Edition" " " "1999-2000 Base" "1999 10th Anniversary" "2001-2003 Base" "2001-2003 LS" "2001-2003 SE" "2004 Base" "2004 Mazdaspeed" " " "2016-2019 Club" "2016-2019 Grand Touring" "2016-2019 Sport" "2016-2019 RF Club" "2016-2019 RF Grand Touring"|-||-|||-||909-984|,|NBINFL|,|Mazda Miata MX-5 Molded Carpet Kits 1999-2005|,|909-984|,|719.99|,|625.99|,||,||,||,||,||,||,|Mazda Miata MX-5 Molded Carpet Kits 1999-2005
When considering new carpet for your Miata, you'll be thinking about cost, ease of installation, and overall product quality. This molded carpet kit from the UK makes installation easier than a non-molded kit, is high quality, and costs slightly more than other kits because it is molded. The kit comes in three molded pieces: one for each tunnel and a third for the rear parcel shelf. All pieces are cut in the necessary shapes and even include the necessary holes to fit perfectly to your floor panel. Because the same kit fits both 90-97 and 99-05 Miatas but their seatbelts are in slightly different spots, the carpet is marked for each car and you must make those small cuts to fit your Miata. The instructions are even done in a way that you don't need to remove your dash to install the kit. The fit of this kit is perfect and you can do the installation, saving you in labor fees!
The underfelt kit is highly recommended. It makes the carpet feel even plusher, and helps with sound deadening. Most 1990-97 NA Miatas are of an age where the original might tear upon removal, or have suffered water damage. Like the carpet, this kit is fully cut exactly for your Miata and is easy to install.
Don't leave your trunk carpet dirty and old - we have a kit either with or without a spare tire cover, and these kits are molded as well. Same quality build as the carpet kits, exactly trimmed to fit. Take care of your Miata's entire carpet needs at one time!
|,|"Select Option" "Select Here" "Cut Pile Molded" "Loop Molded add(+$70)"|-||-|"Select Color" "Select Here" "Black" "Tan"|-||-|"Shipping & Handling" "add(+$105)"|-||-|||-||61-1628-61-1472ST|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Mazda Miata MX-5 NC SIDE & FRONT Hardtop Brackets 2006-2015|,|61-1628-61-1472st|,|189.55|,|159.95|,||,||,||,||,||,||,|Mazda Miata MX-5 NC SIDE & FRONT Hardtop Brackets 2006-2015
Waterjet cut and powder coated in ultra durable textured black to match with the factory hard top's interior. They are cut to nest in the factory hard top's cavity perfectly. Made from lightweight .125" thick STEEL. These are side brackets, front brackets are available separately.
|,|||-||GENUINE-MAZDA-MIATA-OEM-FRONT-NON--PAINTED-AIR-DAM|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Mazda Miata MX-5 OE Style Front Air Dam 2009-2013|,|OESTYLE-NH52-V4-900A|,|278.95|,|245.02|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 OE Style Front Air Dam 2009-2013
|,|"Year" "2009" "2010" "2011" "2012" "2013"|-||-|||-||N243-43-7B0A|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM ABS Control Unit Yaw Sensor 2016+|,|N243-43-7B0A|,|507.13|,|405.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM ABS Control Unit Yaw Sensor 2016+
#5 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|||-||NA23-43-73XE|,|19MAMIBRRORE1|,|Mazda Miata MX-5 OEM ABS Sensor 1990-2000|,|NA23-43-73XE-70XE|,|241.54|,|179.95|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM ABS Sensor 1990-2000
#12 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||57K00|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 OEM AIR BAG 2009-2013|,|AIR-BAG|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM AIR BAG 2009-2013
Please shop by the number on the diagram
|,|"MODULE, AIR BAG W/AUTO CRUISE CONT - 57K00" "Select Here" "Yes add(+$589)"|-||-|"MODULE, AIR BAG W/O AUTO CRUISE CONT - 57K00" "Select Here" "Yes add(+629)"|-||-|"SENSOR, AIR BAG - 57K1X" "Select Here" "Yes add(+$179)"|-||-|"UNIT, SAS - 57K30" "Select Here" "Yes add(+$434)"|-||-|"MODULE, AIR BAG PASSENGER - 57K50" "Select Here" "Yes add(+$809)"|-||-|"MODULE RIGHT (R) - A/B, SIDE W/SIDE AIR BAG SISTEM - 57KA0" "Select Here" "Yes add(+$445)"|-||-|"MODULE LEFT (L) - A/B, SIDE W/SIDE AIR BAG SISTEM - 57KB0" "Select Here" "Yes add(+$445)"|-||-|"SENSOR SIDE RIGHT (R) - A/B, IMPACT W/SIDE AIR BAG SISTEM - 57KC0A" "Select Here" "Yes add(+$188)"|-||-|"BRACKET, AIR BAG MODULE - 57KX5" "Select Here" "Yes add(+$12.95)"|-||-|"PAD, FLOOR MAT W/O SIDE AIR BAG SISTEM - 686L1" "Select Here" "Yes add(+$4.80)"|-||-|"CAP - 57997" "Select Here" "Yes add(+$11.05)"|-||-|"NUT, FLANGE - 90906" "Select Here" "Yes add(+$3.80)"|-||-|"BOLT - 99601" "Select Here" "Yes add(+$4.15)"|-||-|||-||NA1J-V9-09X|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Alloy Clutch / Brake Pedals 2016+|,|Mazda-NA1J-V9-09X|,|109.95|,|96.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Alloy Clutch / Brake Pedals 2016+
|,|||-||43028|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 OEM AUTOMATIC TRANSMISSION BRAKE PEDAL 2009-2013 |,|AUTOMATIC-TRANSMISSION-BRAKE-PEDAL|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM AUTOMATIC TRANSMISSION BRAKE PEDAL 2009-2013
Please shop by the number on the diagram
|,|"PAD, PEDAL PEDAL SET;STD - 43028" "Select Here" "Yes add(+$12.05)"|-||-|"PAD, PEDAL PEDAL SET;ALLUMI - 43028" "Select Here" "Yes add(+$36.95)"|-||-|"PEDAL, BRAKE PEDAL SET;ALLUMI - 43030" "Select Here" "Yes add(+$129.05)"|-||-|"PEDAL, BRAKE PEDAL SET;STD - 43030" "Select Here" "Yes add(+$129.05)"|-||-|"REST, FOOT PEDAL SET;STD - 43041" "Select Here" "Yes add(+$29.85)"|-||-|"REST, FOOT PEDAL SET;ALLUMI - 43041" "Select Here" "Yes add(+$109.05)"|-||-|"PLATE - 43090" "Select Here" "Yes add(+$13.05)"|-||-|"PIN, SNAP - 43152" "Select Here" "Yes add(+$4.45)"|-||-|"BOLT & WASHER, FLNG - 90794" "Select Here" "Yes add(+$5.75)"|-||-|"NUT - 90901" "Select Here" "Yes add(+$7.55)"|-||-|"NUT, FLANGE - 90906" "Select Here" "Yes add(+$4.50)"|-||-|"PIN, JOINT - 99230" "Select Here" "Yes add(+$6.55)"|-||-|||-||NAYJ-43-7A0E|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Brake ABS Control Unit 2016+|,|NAYJ-43-7A0E|,|853.54|,|695.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Brake ABS Control Unit 2016+
#1 IN ILLUSTRATION
Fits 2016 and Up MX-5 With tire pressure monitor.
Manufacturer: Genuine Mazda Original Parts
|,|||-||NEY1-61-450|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 OEM COMPRESSOR ASSEMBLY 2006-2015|,|ney1-61-450|,|504.95|,|386.05|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM COMPRESSOR ASSEMBLY 2006-2015
|,|||-||NE51-R1-3A0D|,|SOFTTOPNC|,|Mazda Miata MX-5 OEM Convertible Top Latch - FRONT 2006-2015|,|NE51-R1-3A0D|,|138.02|,|115.95|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Convertible Top Latch - FRONT 2006-2015
REFERENCE #12 IN ILLUSTRATION
FITS Soft Top, Hard Top
|,|||-||NE51-R1-344A|,|SOFTTOPNC|,|Mazda Miata MX-5 OEM Convertible Top Striker Hook 2006-2015|,|NE51-R1-344A|,|17.97|,|16.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Convertible Top Striker Hook 2006-2015
REFERENCE #13 IN ILLUSTRATION
|,|||-||NE51-R1-364B|,|SOFTTOPNC|,|Mazda Miata MX-5 OEM Convertible Top Wedge 2006-2015|,|NE51-R1-364B|,|70.49|,|58.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Convertible Top Wedge 2006-2015
REFERENCE #14 IN ILLUSTRATION
|,|||-||PEFB-15-025|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Cooling Fan Assembly 2016+|,|PEFB-15-025|,|588.95|,|462.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Cooling Fan Assembly 2016+
Notes: Includes Fan, Motor And Shroud.
PEFB-15-025: Auto Transmission
P51N-15-025: Manual Transmission
Manufacturer: Genuine Mazda Original Parts
|,|"Select Transmission" "Select Here" "Auto Transmission" "Manual Transmission"|-||-|||-||PEFB-15-15Y|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Cooling Fan Control Module 2016+|,|PEFB-15-15Y|,|182.44|,|149.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Cooling Fan Control Module 2016+
#8 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Transmission" "Select Here" "Auto Transmission" "Manual Transmission"|-||-|||-||PEFB-15-150|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Cooling Fan Motor 2016+|,|PEFB-15-150|,|291.02|,|218.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Cooling Fan Motor 2016+
#3 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Transmission" "Select Here" "Auto Transmission add(+$25)" "Manual Transmission"|-||-|||-||D10F-66-960|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Door Replacement Speaker 2016+|,|D10F-66-960|,|137.63|,|115.20|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Door Replacement Speaker 2016+
Fits 2016 and Up with 9 Speaker Audio
Manufacturer: Genuine Mazda Original Parts
|,|||-||NC72-68-420F-21|,|NBINSEDO|,|Mazda Miata MX-5 OEM Door Trim Panel 2001-2005|,|NC72-68-420F-21|,|674.61|,|569.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Door Trim Panel 2001-2005
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|"Select Option" "Select Here" "Power windows, 2 speakers" "Power windows, 4 speakers without bose"|-||-|"Shipping & Handling" "add(+$105)"|-||-|||-||N243-59-760H-|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Door Weather-Strip 2016+|,|N243-59-760H|,|76.03|,|65.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Door Weather-Strip 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side add(+$10)" "Both Side add(+$75.02)"|-||-|||-||N243-50-650E|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Door-Belt Molding 2016+|,|N243-50-650E|,|83.98|,|70.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Door-Belt Molding 2016+
Driver's Side - N243-50-650E
Passenger's Side - N243-50-640E
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$70.02)"|-||-|||-||NC11-68-450G-02|,|NBINSEDO|,|Mazda Miata MX-5 OEM Driver Side Door Trim Panel 1999-2000|,|nc11-68-450g-02|,|596.15|,|519.95|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Driver Side Door Trim Panel 1999-2000
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "Power windows, 2 speakers" "Manual windows, 2 speakers" "Power windows, 4 speakers"|-||-|"Shipping & Handling" "add(+$105)"|-||-|||-||N243-52-211A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM FENDER 2016+|,|N243-52-211A|,|262.53|,|214.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM FENDER 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|"Shipping and Handling fee" "add(+$85)"|-||-|||-||N243-56-130A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM FENDER LINER 2016+|,|N243-56-130A|,|99.24|,|85.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM FENDER LINER 2016+
#7 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|||-||N243-51-741|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM FRONT Mascot Emblem 2016+|,|N243-51-741|,|33.28|,|27.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Mascot Front Emblem 2016+
#5 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|||-||NA01-33-031A|,|19MAMISUANDS5|,|Mazda Miata MX-5 OEM Front Upper Control Arm, Ball Joint 1990-1997|,|NA01-34-200A|,|413.47|,|342.00|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Front Upper Control Arm, Ball Joint 1990-1997
Part can be found as reference #3 in illustration
SKU#:
NA01-34-200A w/o abs,
NA23-34-200A with abs R,
NA23-34-250A with abs L
|,|"Select Abs Type" "Select Here" "Without ABS" "With ABS"|-||-|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$342)"|-||-|||-||NF28-R1-861C|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Mazda Miata MX-5 OEM Hard Top Rear Deck Latch 2006-2008|,|NF28-R1-861C|,|83.92|,|69.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Hard Top Rear Deck Latch 2006-2008
NF28-R1-861C - Passenger
NF28-R1-871C - Driver
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||NF28-R1-851C|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Mazda Miata MX-5 OEM Hard Top Striker Plate 2006-2008|,|NF28-R1-851C|,|183.95|,|159.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Hard Top Striker Plate 2006-2008
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||NF28-R1-314A|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Mazda Miata MX-5 OEM Hard Top Wedge Male 2006-2015|,|NF28-R1-314A|,|65.21|,|58.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Hard Top Wedge 2006-2008
#10 IN ILLUSTRATION
Other Names: Wedge Male-Top
RETRACTABLE HARD TOP: NE52-R1-314B, DETACHABLE HARD TOP: NF28-R1-314A
Manufacturer: Genuine Mazda Original Parts
|,|"Select Hard Top Type" "Select Here:" "Detchable Hard Top" "Retractable Hard Top add(+$29)"|-||-|"Select Side" "Select Here: " "Driver Side" "Passenger Side"|-||-|||-||NE51-R1-374B|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Mazda Miata MX-5 OEM Hard Top Wedge Male COVER 2007-2015|,|NE52-R1-315|,|75.68|,|61.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Hard Top Wedge Male COVER 2007-2015
#17 IN ILLUSTRATION
Other Names: Wedge Male-Top COVER
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side" "Both Side add(+$61.02)"|-||-|||-||99351069991|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 OEM Hoses 2006-2013|,|OEM-Hoses-2006-2013|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Hoses 2006-2013
Please see OEM Part# when you shop 2006-2013 Hoses.
|,|"HOSE - 9935106999" "Select Here" "Yes add(+$29)"|-||-|"HOSE, BYPASS - LFE215260A" "Select Here" "Yes add(+$29)"|-||-|"HOSE, SUB TANK - LFG115381B" "Select Here" "Yes add(+$35)"|-||-|"HOSE, WATER - LFE313680A" "Select Here" "Yes add(+$19.05)"|-||-|"HOSE, WATER - LFE215536B" "Select Here" "Yes add(+$22.05)"|-||-|"HOSE, WATER - LFG115183C" "Select Here" "Yes add(+$29.05)"|-||-|"HOSE, WATER - LFE213690A" "Select Here" "Yes add(+$29.05)"|-||-|"HOSE, WATER - LFG115184A" "Select Here" "Yes add(+$33.05)"|-||-|"HOSE, WATER - LFG81518YD" "Select Here" "Yes add(+$85.05)"|-||-|"HOSE, WATER - LFG11518XC" "Select Here" "Yes add(+$98.05)"|-||-|"HOSE, WATER - OIL COOLER - LFE31554YB" "Select Here" "Yes add(+$52.05)"|-||-|"HOSE, WATER SUB TANK - LFG115380" "Select Here" "Yes add(+$44.05)"|-||-|||-||LFH1-15-940A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 OEM IDLER PULLEY 2011-2015|,|lfh1-15-940a|,|65.95|,|55.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM IDLER PULLEY 2011-2015
|,|||-||L315-40-581|,|20MAMIEXGAAN|,|Mazda Miata MX-5 OEM Manifold Lower Seal 2006-2015|,|L315-40-581|,|48.21|,|36.10|,||,||,||,||,||,||,|Mazda Miata MX-5 Manifold Lower Seal 2006-2015
MX-5 Swivel Gasket 2006-2010
#8 on the diagram
|,|||-||LFG218861B9U|,||,|Mazda Miata MX-5 OEM Oxygen (O2) Sensors 2006-2013|,|LFG218861B9U|,|195.05|,|180.85|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Oxygen (O2) Sensors 2006-2013
|,|||-||P51N-15-200|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Radiator 2016+|,|P51N-15-200|,|399.33|,|318.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Radiator 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Transmission" "Select Here" "Auto Transmission" "Manual Transmission"|-||-|||-||PEET-15-186|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Radiator Hoses 2016+|,|PEET-15-186|,|92.88|,|69.95|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Radiator Hoses 2016+
Included 2 hoses - Upper and Lower Hose
#1 and #4 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|||-||NA1P-51-721|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM REAR MX5 Nameplate 2016+|,|NA1P-51-721|,|34.32|,|28.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM MX5 Nameplate 2016+
Manufacturer: Genuine Mazda Original Parts
|,|||-||N243|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Rocker Molding - Side Step 2016-2022+|,|N243|,|652.59|,|549.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Rocker Molding - Side Step 2016-2022+
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$549.02)"|-||-|"Select Option" "Select Here" "Without rear deflector" "With rear deflector"|-||-|"Select Color" "Select Here" "CRYSTAL WHITE" "ARCTIC WHITE" "MACHINE GRAY" "CERAMIC" "BLUE RELEX" "JET BLACK" "RED CRYSTAL" "ETERNAL BLUE"|-||-|||-||N243-51-P40D|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Rocker Molding 2016-2021|,|N243-51-P40D-XX|,|652.59|,|518.20|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Rocker Molding 2016-2021
PART CAN BE FOUND AS REFERENCE #1 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|"Select Color" "Select Here" "Ceramic add(+$10)" "Arctic White" "Jet Black" "Soul Red" "Blue Relex" "Crystal White" "Machine Gray"|-||-|"Select Option" "Select Here" "With Rear Deflector" "Without Rear Deflector"|-||-|||-||NA82-57-630E-00|,|NASEATSDOOR|,|Mazda Miata MX-5 OEM Seat Belt & Retractor 1990-1997|,|NA01-57-690C-00|,|2,697.43|,|243.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Seat Belt & Retractor 1990-1997
Manufacturer: Genuine Mazda Original Parts
#1 IN ILLUSTRATION
|,|"Select Year & Side" "Select Here" "1990-1993 Driver's Side add(+$65)" "1990-1993 Passenger's Side" "1994-1997 Driver's Side" "1994-1997 Passenger's Side add(+$75)"|-||-|||-||LD4769671|,|MAZDA-MX-5-MIATA-OEM-WHEEL-ACCESSORIES-2006-2015|,|Mazda Miata MX-5 OEM SERVICE TOOLS 2006-2015|,|SERVICE-TOOLS|,|48.45|,|35.72|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM SERVICE TOOLS 2006-2015
Please see the part# on the diagram when you select items.
Included - Wheel Lug Wrench, Lifting Lever Jack, Tool Bag
|,|||-||NA1J-51-5E0B|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM SIDE Turn Lamp 2016+|,|NA1J-51-5E0B-NA1J-51-5F0B|,|79.53|,|62.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM SIDE Turn Lamp 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||N243-51-771|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM SKYACTIV Ornament 2016+|,|N243-51-771|,|52.70|,|42.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM SKYACTIV Ornament 2016+
Manufacturer: Genuine Mazda Original Parts
|,|||-||NE55-41-92XA4|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MIATA MX-5 OEM SLAVE CYLINDER 2006-2015|,|Mazda-ne55-41-92xa|,|55.95|,|45.95|,||,||,||,||,||,||,|MAZDA MIATA MX-5 OEM SLAVE CYLINDER 2006-2015
|,|||-||66-4M0AC|,|20MAMIINSTWH|,|Mazda Miata MX-5 OEM Steering Wheel Engagement Switch 2006-2013|,|66-4m0ac|,|363.70|,|295.99|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Steering Wheel Engagement Switch 2006-2013
#2 in illustration
Audio control, Without bluetooth, With shift paddles or Without shift paddles
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "Without AUTO SHIFT PADDLES" "With AUTO SHIFT PADDLES add(+$50)"|-||-|||-||NE51-R1-3B0C|,|SOFTTOPNC|,|Mazda Miata MX-5 OEM Striker Plate 2006-2015|,|NE51-R1-3B0C|,|67.20|,|54.45|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Striker Plate 2006-2015
#22 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "With 4 SPEAKERS" "With 7 SPEAKERS add(+$28)"|-||-|||-||NA1P-61-1J0B|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Touch Screen Display Unit 2016+|,|NA1P-61-1J0B|,|1,098.40|,|925.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Display Unit 2016+
Description: Miata mx5. Touch screen.
Manufacturer: Genuine Mazda Original Parts
|,|||-||N243-56-951A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Trunk Weatherstrip 2016+|,|N243-56-951A|,|68.54|,|55.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Trunk Weatherstrip 2016+
Fits 2016 and Up MX-5 Without hard top.
#4 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|||-||N243-51-730|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM TRUNK(Rear) Mascot Emblem & Clip 2016+|,|N243-51-730|,|33.19|,|26.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM TRUNK Mascot Emblem 2016+
Part comes with Emblem Clip - LA01-51-958
Manufacturer: Genuine Mazda Original Parts
|,|||-||P51B-15-010B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Water Pump Assembly 2016+|,|P51B-15-010B|,|196.13|,|165.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Water Pump Assembly 2016+
Includes Gasket (P51B-15-116) and Water Pump
Manufacturer: Genuine Mazda Original Parts
|,|||-||N243-59-58X|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Window Motor 2016+|,|N243-59-58X|,|159.90|,|128.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Window Motor 2016+
#18 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side add(+$15)" "Passenger's Side" "Both Side add(+$143.02)"|-||-|||-||N243-59-590B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Window Regulator 2016+|,|N243-59-590B|,|122.42|,|104.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Window Regulator 2016+
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$98.55)"|-||-|||-||NA1J-67-321|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 OEM Wiper Arm 2016+ |,|na1j-67-321-BJS7-67-395|,|66.95|,|51.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM Wiper Arm 2016+
Wiper Arm Cap Included - BJS7-67-395
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$51.02)"|-||-|||-||NE52-67-330B|,|20MAMIEXAC|,|Mazda Miata MX-5 OEM WIPER BLADE 2006-2015|,|NE52-67-330B|,|24.91|,|17.02|,||,||,||,||,||,||,|Mazda Miata MX-5 OEM WIPER BLADE 2006-2015
|,|"Select Side" "Select Here" "Driver Side add(+$4)" "Passenger Side" "Both Side add(+$21.02)"|-||-|||-||GENUINE-MAZDA-OIL-FILTER-WRENCH|,|19MAMIMAVEAL|,|Mazda Miata MX-5 Oil Filter Wrench|,|AKS-A255|,|23.00|,|17.02|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Oil Filter Wrench
Mazda Oil Filter Wrench
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1998" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||ORC-ENGINE-BAY-LED|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 ORACLE ENGINE BAY LED LIGHTING KIT |,|ORC-BAY-LED|,|92.95|,|79.90|,||,||,||,||,||,||,|Mazda Miata MX-5 ORACLE ENGINE BAY LED LIGHTING KIT
Light up your engine bay with this specially designed kit from ORACLE Lighting.
ORACLE Flex LED Strips Feature High-Quality USA Made Bridgelux SMD Chips for maximum quality, brightness, and longevity. Not only are the SMDs excellent quality but there are more LEDs per section than our competition. The LED strips are sealed with high grade silicone rather than epoxy so that the strips do not yellow or fade due to engine bay heat.
The ColorSHIFT upgrade option includes ColorSHIFT 2.0 control unit (a $99.50 value!)
Package includes:
- (1) 48" Strip (Rear engine bay)
- (1) 48" Strip (Front engine bay)
- (2) 36" Strips (Engine bay sides)
|,|"Select Color" "Select Here" "White" "Blue" "Red" "Green" "Amber" "Yellow" "Pink" "Purple add(+$5)" "Color SHIFT add(+$149)"|-||-|"Upgrade 48 Strips to 60" "No" "Yes add(+$10)"|-||-|||-||MAZDA-MIATA-MX-5-OXYGEN-SENSOR-MIATA-1994-1997-1-8-FRONT-PRE-CAT-DIRECT-FIT|,|19MAMIEXGAAN|,|Mazda Miata MX-5 Oxygen Sensor Miata 1994 - 1997 1.8 Front Pre Cat - Direct Fit Replaces BPE8-18-861A-9U|,|NAB-7250|,|212.46|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Oxygen Sensor Miata 1994 - 1997 1.8 Front Pre Cat - Direct Fit Replaces BPE8-18-861A-9U
Oxygen Sensor for 1994-1997 1.8L Mazda Miata MX-5. Bank 1: replaces Mazda BPE8-18-861A-9U the first o2 which is located at exhaust manifold.
The oxygen sensor is a critical component of the automotive fuel injection system; it constantly measures the oxygen content in the exhaust gas and helps the ECU (Vehicle Computer) ensure optimal engine operation at an industry standard of14.7.1.
Most importantly, too much oxygen in air/fuel ratio means the engine is running lean which is less than optimal causing reduced engine performance and damaging detonation. Oppositely, if there is too little oxygen in the ratio it means the engine is running rich and wasting excessive fuel and creating excess emission. Both conditions may shorten the lifespan of a vehicle's engine and catalytic converter.
Rspeed Oxygen Sensors are the result of rigorous testing on and off track to produce Oxygen Sensors that operate consistently at OE specifications; as such they increase vehicle's engine performance, lower vehicle emissions, and improve vehicle's fuel economy. To ensure longer sensor lifecycles and vehicle safety, every R Speed sensors is produced with premium materials that protect the sensor against the harsh environment inside of the exhaust pipe, which cause premature sensor failure in common in mass produced units. In addition, all R Speed 02s are tested against the sensor's function parameters to guarantee the highest quality and stability for even the most discerning Miata owners.
Unlike troublesome universal units, ours does not require any cutting or splicing as all our Miata o2 Sensors feature original style plug and play harnesses. Additionally, we build all RSpeed o2 Sensors in the Rounded hole, frontal tube, OS5 Japanese type just like the OEM units that where factory equipped with you Mazda Miata MX-5.
|,|||-||905-293|,|20MAMIINAC|,|Mazda Miata MX-5 Padded Console Cover by IL Motorsport 2006-2008|,|905-293|,|115.99|,|99.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Padded Console Cover by IL Motorsport 2006-2008
A new accessory for your much loved center console insert from IL Motorsport. This piece replaces the hard top lid that comes with the 905-290 or 905-292 (it doesn't replace the lid that came from the factory). This hinged padded armrest will make cruising even more comfortable! Hinged on the back, the top swings up toward the rear between the seats for access to everything stored in your console.
|,|||-||MIPEPRBO|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Performance Projects|,|100-101|,|56.99|,|48.95|,||,||,|0.000 |,||,|asdga|,||,|Mazda Miata MX-5 Performance Projects
We highly recommend this excellent book for every Miata owner. It will walk you step-by-step through nearly 40 maintenance jobs and performance upgrades on your Miata. It tells you exactly what tools you'll need to do the job, and estimates the time it will take. Excellent book for beginners and experts alike.
Teaches you step by step how to:
- Change the Oil
- Replace the Shifter Boots
- Set the Timing
- Prepare your Miata for the Track
- Replace Spark Plugs & Wires
- Fix Noisy Hydraulic Lifters
- Change Drive Belts
- Replace Timing Belt
- Intall a New Clutch or Flywheel
- Change the Exhaust System
- Install a Header
- Install Shocks and Sway Bars
- Replace the Convertible Top
- Install a Roll Bar
- Stripe a Miata
...and much more!
AUTHORS: Scott Croughwell, Keith Tanner
|,|||-||910-411|,|20MAMISUANDS5|,|Mazda Miata MX-5 Polyurethane Control Arm Bushings by Energy Suspension - FRONT 2006-2015|,|910-411|,|135.00|,|110.40|,||,||,||,||,||,||,|Mazda Miata MX-5 Polyurethane Control Arm Bushings by Energy Suspension - FRONT 2006-2015
OEM rubber bushings break down with age, which makes your suspension feel sloppy. Switching to polyurethane bushings will not only get rid of that sloppiness but offer a more precision and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane will not only make your Miata handle better but you will never have to replace these bushings again as Energy Suspension's Hyper-Flex polyurethane will not break down like rubber bushings. Energy Suspension's Hyper-Flex polyurethane formulation is unique and so highly advanced that it has been awarded nine U.S Patents. Comes with installation instructions.
|,|||-||910-412|,|20MAMISUANDS5|,|Mazda Miata MX-5 Polyurethane Control Arm Bushings by Energy Suspension - REAR 2006-2015|,|910-412|,|169.95|,|134.20|,||,||,||,||,||,||,|Mazda Miata MX-5 Polyurethane Control Arm Bushings by Energy Suspension - REAR 2006-2015
OEM rubber bushings break down with age, which makes your suspension feel sloppy. Switching to polyurethane bushings will not only get rid of that sloppiness but offer a more precision and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane will not only make your Miata handle better but you will never have to replace these bushings again as Energy Suspension's Hyper-Flex polyurethane will not break down like rubber bushings. Energy Suspension's Hyper-Flex polyurethane formulation is unique and so highly advanced that it has been awarded nine U.S Patents. Comes with installation instructions.
|,|||-||910-416|,|20MAMISUANDS5|,|Mazda Miata MX-5 Polyurethane Rack and Pinion Bushing Set 2006-2015|,|910-416|,|39.99|,|30.50|,||,||,||,||,||,||,|Mazda Miata MX-5 Polyurethane Rack and Pinion Bushing Set 2006-2015
OEM rubber bushings break down with age, which makes your suspension feel sloppy. Switching to polyurethane bushings will not only get rid of that sloppiness but offer a more precision and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane will not only make your Miata handle better but you will never have to replace these bushings again as Energy Suspension's Hyper-Flex polyurethane will not break down like rubber bushings. Energy Suspension's Hyper-Flex polyurethane formulation is unique and so highly advanced that it has been awarded nine U.S Patents. Comes with installation instructions.
|,|||-||909-456|,|SHOP-BY-SALE|,|Mazda Miata MX-5 Premium Leatherette Seat Covers 1990-2019+ - SALE |,|909-456|,|329.05|,|259.99|,||,||,||,||,||,||,|Mazda Miata MX-5 Premium Leatherette Seat Covers 1990-2019+
These seat covers are truly amazing - we actually had a hard time believing they aren't leather! In fact, we think they are better than leather: Better wear resistance, better abrasion resistance, the color won't fade thanks to UV protection in the material, easier to maintain (just wipe clean with a damp cloth) - all at a fraction of the cost of real leather. These covers are specially tailored to the Miata's seats so the fitment is perfect, and you can easily install them yourself, further saving you money on an expensive upholstery shop job! A terrific animal-free alternative too. Light tan color mimics the light tan code NB06 found on 99-05 Miatas. Sold as a pair.
We recommend you remove your seats before installing the covers. Please refer to a shop manual for more information.
|,|"Select Year" "Select Here" "1990-1995" "1996-1997" "1999-2000" "2001-2005" "2006-2015 BLACK W/Seat Mount Air Bag" "2006-2015 BLACK W/O Seat Mount Air Bag" "2016-2023"|-||-|"Select Color" "Select Here" "BLACK" "LIGHT TAN"|-||-|"Direct Shipping & Handling" "add(+$79)"|-||-|||-||MT-CRK-18|,|19MAMIENPEOI1|,|Mazda Miata MX-5 QMAX Coolant Reroute Kit 1990-2005|,|SP-MQMX|,|389.00|,|329.99|,||,||,||,||,||,||,|Mazda Miata MX-5 QMAX Coolant Reroute Kit 1990-2005
Why reroute?
The B series engine in the Miata was designed for a fwd car. As with all inline 4 cyl engines, coolant entered one one end of the head and exited the other end in the fwd application. This simple path is the most efficient way to extract heat from the head. Mazda turned the engine 90° and tucked it up against the firewall in the Miata. This meant moving the coolant exit to the front, the same end of the head as the inlet. This poor flow path is the primary cause for overheating which is so common in the 90-05 MX5. Our reroute has a carefully engineered low profile adapter for the back of the head to retain the original front to back coolant path. Just this one modification will significantly reduce coolant temps. Even a bone stock Miata will run a bit hot, and the stock ECU will reduce ignition timing which hurts power and fuel economy.
The Qmax Reroute Features
Internally machined to maximize coolant velocity which is key to improving cooling efficiency.
Retain the use of your EGR pipe for emissions or CEL.
The OEM coolant temp sensor location is retained so the wiring harness does not need to be modified.
Spare 1/8 NPT ports are provided for aftermarket coolant temp or coolant pressure sensors.
All important hardware is stainless steel to increase service life.
High flow Stant Superstat is utilized to increase coolant velocity.
Simple sealed adapter housing elminates gaskets and finicky, leak prone threaded fittings.
Convenient bleed port allows system bleeding with car level if you have COPS ignition.
No remote thermostat housing for easy fitment and improved reliability.
Contents of QMAX Reroute kit
1x Reroute housing, Supermiata, 7075 T-6
1x Thermostat cover, Supermiata, 7075 T-6
1x Head coolant port block off plate, Supermiata, 7075 T-6
1x Coolant neck block off plate, Supermiata, 7075 T-6
3x M6 x 1 x 25mm BHCS, black oxide
1x 1- 11/16 inch retaining ring, HO-168SS
3x 1/8 NPT plugs, SS
1x Bleed screw assy Wilwood 220-0627
1x Worm drive hose clamp, 5/8" Breeze 9416, liner SS
2x Worm drive hose clamp 1.25", Breeze 9424, liner SS
1x 3/8" NPT - 5/8" hose barb, brass
1x M16 x 1.5 drain plug, zinc
1x 1.25" reinforced silicone hose, 44"
1x Thermostat, 45849 Stant Superstat, SS
1x Sealant, Permatex 22071
|,|||-||MAZDA-MIATA-MX-5-RACING-HARD-TOP-MOUNTING-KIT-2006-2014|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Mazda Miata MX-5 Racing Hard Top - Mounting Kit 2006-2014|,|DGM-50-66-7120|,|199.99|,|169.00|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Racing Hard Top - Mounting Kit 2006-2014
This kit includes the FRONT AND SIDE hard-mount brackets and hardware for the MX-5 hardtop. You can use these brackets to hard-mount your hardtop for racing.
- Powder coated steel
- Mounting hardware included!
|,|||-||MS-908-153|,|NAEXVIALL|,|Mazda Miata MX-5 Radiator Cooling Panel by DaveFab 1990-2005|,|ms-908-153|,|85.55|,|74.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Radiator Cooling Panel by DaveFab 1990-2005
Get the optimal cooling performance during track or spirited driving with our radiator cooling panels! Maximizing airflow through the radiator, our cooling panel forces the air through the radiator, preventing it from escaping up and into the engine bay, thereby reducing engine temperatures.
These lightweight, aluminum panels sport a precision laser-cut profile, and bolt onto factory mounting points using stainless-steel fasteners for a perfect fit. Finished in a stealthy, satin textured, black powder-coat, these sleek panels look cool, and greatly improve the look of your Miata's engine bay.
|,|"Select Year" "Select Here" "1990-1993 add(+$5)" "1994-1997 add(+$5)" "1999-2005"|-||-|||-||CM-SP1-NA|,|NEW|,|Mazda Miata MX-5 Radiator Cowl Covers by Tourist Trophy 1990-2005|,|MS-902-497|,|85.00|,|47.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Radiator Cowl Covers by Tourist Trophy 1990-2005
DESCRIPTION
Precision cut from polished stainless steel, this radiator cowl cover really dresses up your engine bay. It also closes off an area where some air can escape over the top of your radiator, instead of going straight through. Adds a bit of cooling efficiency and a great look!
|,|"Select Year" "Select Here" "1990-1997" "1999-2005"|-||-|||-||901-360|,|NBACCESSORIES|,|Mazda Miata MX-5 Raydyot Retro Racing Mirrors 1993-2005|,|901-360-901-361|,|149.95|,|129.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Raydyot Retro Racing Mirrors 1993-2005
Raydyot mirrors were popular in the 1950's and 60's for their aluminum construction that is lightweight and vibration-free - and they look great. Moss has been reproducing the Raydyot mirrors for our classic British sports cars for many years. Recently we added a convex mirror for better visibility in a modern car and risers to fit the NA 1990-97 Miatas and NB 1999-2005 Miatas.
Sold as a pair.
|,|"Select Year" "Select Here" "1993-1997" "1999-2005"|-||-|||-||910-242|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Rear 16mm Sway Bar by Eibach 2016-2020|,|eibE40-55-019-01-01|,|309.00|,|254.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Rear 16mm Sway Bar by Eibach 2016-2020
You love driving your Miata through canyons, twisty mountain back roads, or autocross competitions - make it handle even better with Anti-Roll Sway Bars from Eibach! The bars reduce body roll in corners and excessive nose-dive under braking. YouËÇÖll experience a more precise turn-in response, improved handling, and enhanced cornering grip. A great upgrade to EibachËÇÖs Pro-Kit Springs.
Features:
Front Bar: 27mm 2-way Adj, Solid. Rear Bar: 16mm 2-way Adj, Solid. Performance Tuned for Improved Handling and Reduced Body Roll Precise Turn-In Response, Improved Handling, Enhanced Cornering Grip Greasable Urethane Bushings for Increased Responsiveness Adjustable to Fine Tune to Your Driving Style Manufactured from Hi-Tensile Steel, Cold-Formed, Tempered and Shot-Peened then Powdercoated Comes Complete with Mounting Hardware and Instructions Million-Mile Warranty
|,|||-||REAR-CANARDS|,|NBACCESSORIES|,|Mazda Miata MX-5 Rear Canards 1999-2005|,|872018|,|195.00|,|139.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Rear Canards 1999-2005
These lightweight carbon fiber canards will finish your rear bumper perfectly by optimizing the airflow. Front canards also available in our shop!
250 grams/set
Perfect fitment on OEM bumper
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum BAG
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
|,|"Select Material" "Select Here" "Fiber Glass" "Carbon Fiber add(+$80)"|-||-|"Handling fee" "add(+15)"|-||-|||-||CM-RP2-NA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata MX-5 Rear Carbon Fiber Finish Panel 1990-1997|,|CM-RP2-NA|,|585.00|,|399.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Rear Carbon Fiber Finish Panel 1990-1997
DESCRIPTION
This carbon fiber rear finish panel gives a good effect to the rear of your Miata Mx-5. You can retrofit the OEM license plate lights with it. This item only weight 500 Grams – 1.2 Pounds.
Specifications:
– 3K Carbon Fiber 1×1 twill (Made in Japan)
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
|,|"EMS Shipping & Handing" "add(+$119)"|-||-|||-||907-348|,|20MAMISUANDS1|,|Mazda Miata MX-5 REAR Lower Brace by IL Motorsport 2006-2015|,|907-348|,|289.05|,|249.98|,||,||,||,||,||,||,|Mazda Miata MX-5 REAR Lower Brace by IL Motorsport 2006-2015
Keeps the rear end from twisting under acceleration and hard cornering.
|,|||-||907-347|,|20MAMISUANDS1|,|Mazda Miata MX-5 REAR P.P.F Stabilizer by IL Motorsport 2006-2015|,|907-347|,|250.05|,|229.98|,||,||,||,||,||,||,|Mazda Miata MX-5 REAR P.P.F Stabilizer by IL Motorsport 2006-2015
Factory Power Plant Frame (PPF) is weak and susceptible to flexing, this strong piece helps the horsepower get to the wheels.
|,|||-||910-490|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Rear Shock Tower Brace by IL Motorsport 2016-2020|,|910-490|,|249.95|,|219.90|,||,||,||,||,||,||,|Mazda Miata MX-5 Rear Shock Tower Brace by IL Motorsport 2016-2020
Rear strut tower brace by IL Motorsport is light weight and improves your fourth generation "ND" MX-5 Miata's cornering behavior by triangulating the chassis at the shock towers. Comes complete with installation instructions.
|,|||-||AGENCY-POWER-REAR-3-POINT-LINK-BARS-MAZDA-MIATA-2006-2014|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Rear Strut Tower Brace by IL Motorsport 2006-2015|,|909-420|,|210.00|,|198.98|,||,||,||,||,||,||,|Mazda Miata MX-5 Rear Strut Tower Brace by IL Motorsport 2006-2015
When your performance driving habits require the ultimate in chassis strengthening, look now further than the solutions from IL Motorsport. All pieces are made from lightweight aluminum to keep performance to a maximum (rear PPF bar is steel). Four pieces go under your Miata, one in the engine bay, and one in the trunk. Keeping the convertible's chassis stiff helps the rest of your performance suspension perform at it's best.
|,|||-||NC0-0016|,|20MAMIINAC|,|Mazda Miata MX-5 Rear View Mirror Cover Chrome 2006 - 2015|,|nc0-0016|,|49.95|,|35.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Rear View Mirror Cover Chrome 2006 - 2015
These rear few mirror cap fits all MX-5 Mazda Miatas 2006-2015 rearview mirrors. The mirrors are installed with 3M double-sided tape to allow for quick and easy installation.
|,|||-||61-2169|,|NEW|,|Mazda Miata MX-5 RoadsterSport MaxMidpipe 2016-2020|,|61-2169|,|799.00|,|708.00|,||,||,||,||,||,||,|Mazda Miata MX-5 RoadsterSport MaxMidpipe 2016-2020
The Ultimate Miata Midpipe!
The ONLY full 5 inch diameter body ultra highflow 200 CPI Spun Metallic Converter ND Midpipe on the market.... combined with 2.5 inch stainless piping and Monster Magnaflow high density non-fiberglass resonator. Resonator will not pack out, will not burn out, no fiberglass packing in this midpipe (unlike EVERY other midpipe on the market). Made to last in all stainless steel. Simply the best high performance and longest life ND Midpipe available.
Mazda gave us a serious challenge with the ND midpipe design but we got it figured out, and now we introduce this second generation ND Midpipe with the best of everything included! Instead of the small ball/socket outlet of the stock midpipe we convert to a flat flange so we can carry more flow all the way out through any of our RoadsterSport mufflers. That means this midpipe ONLY works with our RoadsterSport brand mufflers (the only way to have smooth 2.5 inches of flow all the way). To replace the function of the ball/socket connection but allow for greater flow we use a stainless flex joint. The stainless flex joint adds significant costs but was the best way to max flow and performance all the way out (most other brands pinch the flow to keep the stock flange connection to muffler).
We also stuff the largest and highest density packing stainless resonator that can fit neatly up under the Miata so that even with greater diameter and flow the sound is mellow and fun, not harsh and abrasive.
All Mandrel bent tube with no tight bends to slow flow, see the picture and notice how smooth and flowing the bends are!
Designed as a bolt-on replacement for the factory midpipe to carry higher flow from larger pipe size all the way out any of our RoadsterSport mufflers.
INCLUDES O2 SENSOR CONNECTION AFTER CONVERTER which means you are ready to add a performance header (relocating the factory second O2 sensor after the converter in this midpipe to help avoid codes.).
Uses high quality SPUN catalytic converter with metal core. Despite presence of converter this unit is not CARB approved...which makes it legal in California only for off-road/race track use). Uses monster size resonator because when you uncork this ND MX5 Miata motor it wants to get loud unless you use a resonator this large (by comparison stock resonator is much smaller).
Despite very large resonator, this midpipe will raise the final sound level because of the much higher flow.
Weight: 20.75 lbs
SORRY, NOT CARB APPROVED FOR CALIFORNIA RESIDENTS, WE CANNOT SHIP TO A CALIFORNIA ADDRESS.
INSTRUCTIONS....see installation instructions in our forum in the Instructions Section, RoadsterSport Midpipe install page 4 and beyond...and note this unit is plug and play on Manual Transmission cars, we have NOT fit it to Automatic cars.
All install hardware is included.
STR LEGAL under Class Rules Update 2012. Pursuant to SCCA 14.10.E: our cat fits entirely in the space that the factory cat occupied pursuant to SCCA 14.10.E....and maker certifies the core for use in any application up to 6.2L and 6000 pounds. Core has 25,000 mile manufacturing defect warranty (no core warranty for boosted or track cars), and the rest (including housings) are stainless and include a lifetime warranty.
BRIAN'S APPLICATION NOTES: I love the sound of this midpipe in combination with our RoadsterSport Helmholtz mufflers, adds burble and throatiness when you push toward redline and helps control the off throttle resonance these motors will otherwise make. We could have done a cheaper midpipe, but we decided to do the best for those of you who demand the best. This is the midpipe we run on both our Turbo ND and our Supercharged ND for max power! On our Turbo ND we use this with our RoadsterSport Race Muffler, on my wife's Supercharged RF we use this with our SuperQ, usually SuperQ header version.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||CS-AA148|,|NEW|,|Mazda Miata MX-5 Shift Knob 2005-2022+|,|CS-AA148|,|145.95|,|119.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Shift Knob 1990-2022+
This Mazda shift knob is a three piece design. Most of the knob is stainless steel and it is Heavy (11oz). Most weighted knobs are all steel, the trouble with that they get hot and cold. If you have accidentally touched the steel belt buckle on a hot day you know what I mean. The knob is mostly black, so it still gets warm, but nothing like that belt buckle.
You probably already enjoy your manual transmission. Why would you drive a car like this any other way? Switch out the knob and I promise you will begin to love shifting even more. The weight of this knob will not go unnoticed. Momentum will power you through every shift. Its hard to describe, so try it for yourself! Our shipping and returns are both free, installing it is easy, so order one up and return it if you are not happy with it. 6-speed pattern
|,|"Select Year" "Select Here" "2005-2015" "2016-2022+"|-||-|"Select Color" "Select Here" "RED" "BLACK"|-||-|||-||CS-AB1351|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Shift Well Cover 2016-2022+|,|cs-ab135|,|199.00|,|144.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Shift Well Cover 2016-2022+
The cover itself is machined from 6061 aluminum and powdercoated black. Stainless hardware secures the cover to the powdercoated steel frame, which bolts to the center console using OEM hardware. Rounding out the kit is a laser cut ABS cover plate and a few bits of hardware to keep the cover plate pressed up against the cover. Install takes about 30 minutes, with only basic tools required. No permanent modifications are required.
|,|||-||MAZDA-MIATA-MX5-1990-1997-SHORT-THROW-SHIFTER1|,|MISHSH|,|Mazda Miata MX-5 Short Throw Shifter 1990-1997 |,|SS-MMX5|,|99.99|,|69.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Short Throw Shifter 1990-1997
Precision machined short throw shifter
Direct bolt on installation, replaces original shifte
Reduces shift throw by at least 20%
Made from T6-6061 lightweight billet aluminum
Chrome polished finish
|,|||-||CS-AA100|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Short Throw Shifter 2016-2022+|,|CS-AA100|,|399.00|,|349.55|,||,||,||,||,||,||,|Mazda Miata MX-5 Short Throw Shifter 2016-2022+
You already love the manual transmission in your Miata. Ripping through the gears up every single on-ramp is a blast. With the CravenSpeed short shifter, you can squeeze a bit more enjoyment out of your car. The shifter reduces throw by over 30% and features a weighted shift knob with a stainless steel core and acetal body. Not only is the throw shortened, but the weighted knob makes shifting that much easier.
From your hand, to the shift linkage inside the transmission, every piece of this shifter is precision machined from the highest quality materials. Everything you need is included: a little extra white lithium grease, a bit of thread locker, and even a tube of silicon gasket material to seal the shifter housing spacer.
Stainless. Lots of it. The main shifter assembly, the shift knob core, and the hardware are all stainless steel. The upper pivot cup, reverse lockout plate, shift housing spacer, and shift knob cap are aluminum. The cap is engraved with a the Six speed shift pattern, although custom engravings are available on request. Fully assembled the shifter is only 1/8" shorter than the stock setup, while still achieving a 30% reduction in throw. The shifter maintains all reverse lockout functionality, simply push down to shift into reverse.
Installing the shifter can be done at home with basic tools. All of the work can be completed from inside the car, with all four wheels on the ground. Since the shifter runs directly into the transmission, there's no messing with shifter cables or wonky linkages. The install takes between 1 and 2 hours, and is very straightforward.
|,|||-||SK412-10-1900|,|20MAMIEXHECO|,|Mazda Miata MX-5 Skunk2 NC Alpha Series Header 2006-2013|,|sk412-10-1900|,|499.00|,|465.95|,||,||,||,||,||,||,|Mazda Miata MX-5 NC Alpha Series Header 2006-2013
Skunk2 is proud to announce its all-new Alpha Header. Patterned after our already popular and dyno-proven MegaPower Headers, which have been used by leading, competitive race teams for years, Skunk2’s Alpha Header employs many of the same design characteristics and technology. Our decision to produce the Alpha Header was driven by our desire to make our race-proven design more affordable and accessible to everyday enthusiasts. New manufacturing techniques allow us to do so at a lower overall cost, making race-winning header technology available to everyone. Skunk2’s Alpha Header offers Skunk2 performance, industry-leading customer service, and a full warranty policy, all at a price comparable to lesser budget-minded headers. Unlike the budget-minded headers, though, only Skunk2 Alpha Headers ensure precise fitment and the peace of mind of knowing that a Skunk2 representative is just a phone call or email away.
All Skunk2 headers are designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. The unique design is the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. Each Skunk2 Alpha Header features equal-length, sequentially paired, stepped primaries and a 4-2-1 tri-Y design that terminates into a collector with a 2.5-inch outlet. These features, paired with Skunk2’s unique design specs, provide an extremely broad powerband that’s applicable to a wide range of engine sizes and configurations. Alpha Headers also feature the smallest possible primary tubes required to achieve optimum overall and peak power. By minimizing the primary tubes’ diameter, Skunk2 is able to maintain the highest possible exhaust gas speed throughout the header, which improves mid-range power and throttle response significantly. Skunk2’s Alpha Header provides the perfect combination of top-end power without sacrificing mid-range performance or throttle response.
*FEATURES:*
* Equal-Length, Tri-Y Design
* T-304 Stainless Steel Construction
* Unique Cylinder Pairing
* Specially Designed Steps
* Thin-Wall, Cast Collector
|,|"Shipping Cost" "add(+$79)"|-||-|||-||SK412-10-2000|,|NEW|,|Mazda Miata MX-5 Skunk2 ND Alpha Series Header 2016-2020|,|sk412-10-2000|,|699.05|,|595.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Skunk2 ND Alpha Series Header 2016-2020
Skunk2 Racing Alpha Series Header for the ’16 through current ND Miata closely follows the design of our already popular and dyno-proven Race Headers, which have been used by leading, competitive race teams for years. The Skunk2’s Alpha Series Header employs many of the same design characteristics and technology characteristics found in our Race headers, however, made more affordable for everyday enthusiasts.
Skunk2’s Alpha Series Header for the ND Miata was engineered from the beginning to increase both horsepower and torque throughout the powerband. The maximized exhaust flow is accomplished through specifically tuned header tubes formed into a 4-1 design that terminates into a True Merged collector with a 2.5-inch outlet. This refined design was the result of more than a decade of racing experience coupled with computerized modeling and extensive dyno testing. These features, paired with Skunk2’s unique design specs, provide an extremely broad powerband that applies to a wide range of engine sizes and configurations. Alpha Series Headers also feature bung provisions for OEM sensors. Each header is constructed from stainless steel with mandrel-bent tubing for added strength, corrosion resistance, and durability.
FEATURES:
Proven Race Design
10+ HP
Tuned Header Tubes
4 into 1 design
True Merged collector with a 2.5-inch outlet
T-304 Stainless Steel construction
NOT AVAILABLE FOR PURCHASE IN CALIFORNIA
|,|"Shipping Cost" "add(+$89)"|-||-|||-||LHP-MX501G-TM|,|NBLIGHTING|,|Mazda Miata MX-5 Smoke Lens Dual Halo Projector Headlights w/ LED DRL & H1 Bulbs 2001-2005|,|LHP-MX501G-TM|,|467.95|,|339.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Smoke Lens Dual Halo Projector Headlights w/ LED DRL & H1 Bulbs 2001-2005
Includes 1 pair of glossy black housing, smoke lens projector headlights with dual halo and LED DRL. Equipped with H1 high beam & low beam bulbs. Bulbs not included for corner lights - Please use stock bulbs, sockets, or wiring for installation. All wiring for headlights are pre-assembled for essential plug and play application
Made by an ISO certified manufacturer using materials that meet strict OEM requirements
Professional installation is highly recommended
|,|||-||SPA015R98TU|,|20MAMIINSTWH|,|Mazda Miata MX-5 SPARCO Tuning Quick Release Black|,|spa-015R98TU|,|442.00|,|369.95|,||,||,||,||,||,||,|Mazda Miata MX-5 SPARCO Tuning Quick Release Black
DESCRIPTION:
Sparco quick releases are made from high quality aluminum and are CNC milled to provide a "zero play" connection.
Available in:
Tuning - Bolts between a Sparco steering hub and a 6-bolt Sparco steering wheel.
TECHNOLOGY:
CNC milled for "zero play"
|,|||-||SPORT-BRA---CARBON-FIBER-FABRIC|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Sport Bra - BLACK CRUSH, CARBON FIBER Fabric 1990-2019|,|CVC-Sport-Bra-Carbon-Fiber|,|185.95|,|128.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Sport Bra - Carbon Fiber Fabric 1990-2019
Carbon Fiber vinyl hood-piece only bra for cars, trucks, vans and SUV's. Hood opens with bra in place. Manufactured from 25 oz. flannel-backed vinyl with double stitching for added strength and body-hugging fit. No tools or drilling required.
- 25 oz. Flannel backed vinyl with exclusive Memory Fit & UV Resistant top coat
- Double stitch/double padding at critical areas strengthens & delivers a better body-hugging fit
- Super soft flannel backing keeps paint scratch free
- Vinyl coated hooks & padded tabs are double covered & reinforced & won't scratch
- Easy installation no tools required & hooks are pre-bent
|,|"Select Material" "Select Here" "BLACK CRUSH Fabric" "CARBON FIBER Fabric add(+$20)"|-||-|"Select Year" "Select Here" "1990-1997 " "1999-2003" "2004 Mazdaspeed" "2016-2019"|-||-|||-||MAZDA-MIATA-MX-5-1990-1993-NA-STAINLESS-STEEL-AXLEBACK-EXHAUST-SYSTEM|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata MX-5 Stainless Steel Axleback Exhaust System 1990-1993 NA|,|TP-CBS-MA589|,|449.99|,|398.99|,||,||,||,||,||,||,|Mazda Miata MX-5 Stainless Steel Axleback Exhaust System 1990-1993 NA
NOTE: ITEM REQUIRES REMOVAL OF THE REAR SUBFRAME BRACE FOR INSTALLATION.
Piping Size: 2.25"
O2 Sensor Ports: 0
Exhaust Tip: 4"
NOTE: THIS ITEM IS PACKAGED IN A LARGE BOX
|,|"Shipping Cost" "add(+$89)"|-||-|||-||909-962|,|19MAMIEXSYMU1|,|Mazda Miata MX-5 Stainless Steel Midpipe by Cobalt - CARB Approved 2001-2005|,|MS-909-962|,|1,099.95|,|998.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Stainless Steel Midpipe by Cobalt - CARB Approved 2001-2005, Not Mazdaspeed
When you want the best performance mid-pipe, choose Cobalt. Designed by our in-house Engineering and R&D team with consulting from our California neighbor, Magnaflow. Full stainless steel 2.5" pipes and welded-in catalytic converter, this bolts to factory or Cobalt headers and mufflers. Factory location O2 connection. Great for supercharged, turbo, or naturally-aspirated Miatas. When you have Moss, Cobalt and Magnaflow working together, you get the best product. CARB legal.
Full stainless steel, 2.5" pipe construction
Welded in Magnaflow CARB legal catalytic converter
Factory location O2 connection
Bolts to factory and Cobalt headers and mufflers
Designed by Moss Engineering and R&D
Consulting by Magnaflow
Great for NA, turbo or superchargers
|,|"Shipping Cost" "add(+$95)"|-||-|||-||909-960|,|19MAMIEXHECO|,|Mazda Miata MX-5 Stainless Steel Stainless Steel Midpipe by Cobalt 1999-2005|,|909-960|,|559.95|,|549.90|,||,||,||,||,||,||,|Mazda Miata MX-5 Stainless Steel Stainless Steel Midpipe by Cobalt 1999-2005
When you want the best performance mid-pipe, choose Cobalt. Designed by our in-house Engineering and R&D team with consulting from our neighbor, Magnaflow. Full stainless steel 2.5" pipes and welded-in 48-state catalytic converter, this bolts to factory or Cobalt headers and mufflers. Factory location O2 connection. Great for supercharged, turbo, or naturally-aspirated Miatas. Will NOT fit Mazdaspeed. When you have Moss, Cobalt and Magnaflow working together, you get the best product. Not CARB approved and cannot ship to an address in the state of California.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||901-734|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata MX-5 Starter for 1990-1997|,|901-734|,|256.95|,|199.00|,||,||,||,||,||,||,|Mazda Miata MX-5 Starter for 1990-1997
New replacement starter for your 1990-1997 Miata.
|,|||-||900-910|,|19MAMIBRRORO1|,|Mazda Miata MX-5 Stock Replacement Brake Rotors by Brembo 1990-2000|,|900-910|,|71.29|,|56.02|,||,||,||,||,||,||,|Mazda Miata MX-5 Stock Replacement Brake Rotors by Brembo 1990-2000
Get stopped Now! Brembo replacement rotors are perfect for when you want a brand name product and nothing too fancy like slotted and drilled rotors. Sold individually.
|,|"Select Year" "Select Here" "1990-1993" "1994-2000 With Standard Brakes add(+$18)"|-||-|"Select Location" "Select Here" "Front Left" "Front Right" "Rear Left" "Rear Right"|-||-|||-||910-351|,|20MAMIINDA|,|Mazda Miata MX-5 Sunstorm Gauge Face by Revlimiter 1990-2015|,|910-351|,|155.95|,|129.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Sunstorm Gauge Face by Revlimiter 1990-2015
The Revlimiter Sunstorm Gauge Face Set for 2009-2015 Miatas, because yellow tachometers aren't just for Italian cars. These are crafted from Aerospace polymer, laser-cut, and digitally screen printed; featuring a 6 o'clock tach/speedometer zero position, and redline at 7200. These gauge faces illuminate using the bulbs already installed in your cluster. Dummy lights below the tach (airbag, lights-up, hold) are eliminated.
Note: This kit is for Miatas with Manual transmissions only.
In the kit:
One set of genuine revlimiter gauge faces.
Pair of no-glue, push-through needle stoppers.
Pry tools to remove OEM gauge needles.
A dry dust cloth.
Pair of gloves.
One-sheet installation guidelines.
910-351, 910-356, 910-360, 910-363
|,|"Select Year" "1990-1997" "1999-2005" "2006-2008 Manual Transmission" "2009-2015 Manual Transmission"|-||-|||-||TDR-HS-ND|,|NEW|,|Mazda Miata MX-5 TDR - Insulated Heat Shield 2016+|,|TDR-HS-ND|,|159.95|,|139.00|,||,||,||,||,||,||,|Mazda Miata MX-5 TDR - Insulated Heat Shield 2016+
MX-5 Miata Track Dog Racing - Insulated Heat Shield
The Track Dog Racing™ exclusive heat shield was designed to help keep your under hood temperatures in check. Manufactured using a triple layer of high-temperature materials. Available for use with factory manifolds and aftermarket headers. Available for all model years of the Miata. A must for supercharger applications.
|,|||-||GENUINE-MAZDA-MIATA-TUNE-UP-KIT|,|19MAMIMAVEAL|,|Mazda Miata MX-5 Tune Up Kit|,|18110-23603-13470|,|92.40|,|64.02|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Tune Up Kit
Mazda Miata Tune Up Kit. This Miata tune-up kit includes Genuine Mazda four (4) spark plugs, Genuine Mazda air filter, and fuel filter.
|,|"Year" "1990" "1991" "1992" "1993" "1994" "1995" "1996" "1997" "1999" "2000" "2001" "2002" "2003" "2004" "2005"|-||-|||-||MIULHOLIKITB|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 Ultimate Hood Lift Kit 2006-2021+|,|CBT-900-239|,|79.99|,|64.98|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5 Ultimate Hood Lift Kit 2006-2021+
* Easy Engine Access – Struts mount near cowl so engine is accessible from the sides without needing to reach around the strut as on other kits.
* Progressive Struts – Once hood is opened 8” the struts gently lift it to the fully open position. Other kits use inexpensive linear struts that are either too strong or to weak that cause the hood to raise so fast it comes to a shuddering stop at the top stressing all components or requires you to lift the hood all the way open yourself.
Color: Black
|,|"Select Year" "Select Here" "2006-2015" "2016-2021+ add(+$30)"|-||-|||-||CS-AA259|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5 Vent Gauge Pod 2016-2018+|,|CS-AA259|,|109.50|,|98.85|,||,||,||,||,||,||,|Mazda Miata MX-5 Vent Gauge Pod 2016-2018+
Gauges are always a fun addition to any sports car. Especially when driving aggressively, keeping an eye on your oil temp, oil pressure, or water temp is a good way to ensure that your engine is running healthily. The problem is, mounting these gauges tends to be tricky. You either end up with a d.i.y. solution that looks good from afar and far from good, or you end up looking like you're auditioning for a spot on the Quick and Angry crew.
When it came to installing a gauge in our Miata, we wanted to maintain the factory appeal of the interior. Our gauge mount attaches to an aluminum spacer ring that simply installs between your A/C vent and the dash. Once installed, your Miata buddies will be wondering why they didn't get that option from the dealer.
|,|||-||908-162|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata MX-5 Vintage Oil filler Cap 1990-2005|,|908-162|,|159.95|,|149.98|,||,||,||,||,||,||,| Mazda Miata MX-5 Vintage Oil filler Cap 1990-2005
Stylish and practical, this chrome finished, vintage oil-filler cap gives a classic finish to your engine bay. With a functional push to open mechanism, it works both as a vented or a sealed typed cap making it stand apart from its competitors in the market. What's more, it allows you to set the mounting orientation any way you like
|,|||-||MAMIWETOKHAC|,|CLEARANCE|,|Mazda Miata MX-5 Wet Okole Seat Covers 1990-2019+ - SALE |,|405-450|,|399.99|,|339.02|,||,||,|0.000 |,||,||,||,|Wet Okole Miata Seat Covers 1990-2019+ - SALE!!!
The Difference is Important with Wet Okole!
Our custom neoprene backed MX-5 Miata car seat covers are designed to fit your Mazda MX-5 Miata. They do not get hot in the summer or cold in the winter. They are completely waterproof and fit your seats like a glove. We manufacture our seat covers in the USA using the finest materials. We offer color combinations to match most car interiors. These seat covers are easy to install and use high quality quick connect fasteners and Velcro.
Standard and Half Piping comes with Black Out side Color.
For Half Piping, piping color and Inside color comes same color.
Only the Full piping comes in one tone
Our neoprene has nylon bonded to both sides for easier installation, better fit and ultimate protection.
We use only the best quality CR 100% neoprene. Others use SBR imitation neoprene.
Here is the difference:
SBR has Poor UV Protection, Poor OZONE Protection and is Flammable.
CR has Good UV Protection, Good OZONE Protection and is NOT Flammable.
(Click swatches for larger image)
All of our MX-5 Miata Seat Covers - Front come with 1/2" foam on the seat and seat back for extra padding and seat protection.
MX-5 Miata Seat Covers - Front are side impact air bag compatible and tested at an airbag lab for compliance.
Our MX-5 Miata Seat Covers - Front completely cover your seats and look like custom Miata upholstery.
Wet Okole is the only Seat Cover that has been tested to meet the Department Of Transportation Rule 302 on flammability.
Our MX-5 Miata Seat Covers - Front - boxing (side panels) neoprene is laminated with nylon on both sides, making it twice as strong.
No rubber touches your seat material which is especially important with leather or vinyl seats.
Wet Okole seat covers are used by more Police, Fire and Lifeguard agencies than any other seat cover.
These Custom Wet Okole Hawaii Seat Covers are Priced for the PAIR!
Have more questions? Give us a call toll free at 1-619-466-4282 for CUSTOMER SERVICE.
|,|"Select Year" "Please Select Here" "1990-1997 Standard Bucket Built in H.R." "1990-1997 Sport Bucket Built in H.R." " " "1999-2001 Bucket Built in H.R." "2002-2005 Sport Highback" " " "2006-2015 Sport Highback Air Bag" "2006-2015 Sport Highback No Air Bag" " " "2016-2019+ Sport Highback Air Bag"|-||-|
"Select Style" "Please Select Here" "Inside Standard" "Half Piping add(+$55)" "Full Piping add(+$85)"|-||-|"Select STANDARD Color" "Please Select Here" "None" "Baby Blue - 04" "Tan - 17" "Mocha - 235" "Taupe - 100" "Dark Brown - 26" "Charcoal - 11" "Light Gray - 21" "School Bus Yellow - 218" "Neon Yellow - 16" "Solar Yellow - 320" "Neon Green - 14"
"Turquoise - 10" "DK Kelly Green - 28" "Teal - 25" "Black - 12" "Cobalt - 23" "Royal - 19" "Navy Blue - 24" "Red - 15" "Wine - 20" "Purple - 22" "Pink - 69" "Neon Pink - 29"
"Neon Orange - 18" "Burnt Orange - 91" "Copper - 307" "Pink Aloha - 46" "Purplr Aloha - 42" "Green Aloha - 44" "Sand Camo - 30" "Ocean Camo - 32" "Green Camo - 31" "Green Hibiscus - 38"
"Red Hibiscus - 33" "Blue Hibiscus - 34" "Black Hibiscus - 35" "Grey Hibiscus - 215" "Island Blue - 50" "Island Mocha - 57" "Leopard - 411" "Carbon Fiber - 121" "Digital Gray - AC2" "RealTree Hardwoods - 259"
"Green Hardwoods - 516" "ReadTree MAX-5 - 505" "RealTree X-Tra - 527" "RealTree AP Pink"|-||-|"Select HALF Piping Color" "Please Select Here" "Baby Blue - 04" "Tan - 17" "Mocha - 235" "Taupe - 100" "Dark Brown - 26" "Charcoal - 11" "Light Gray - 21" "School Bus Yellow - 218" "Neon Yellow - 16" "Solar Yellow - 320" "Neon Green - 14"
"Turquoise - 10" "DK Kelly Green - 28" "Teal - 25" "Black - 12" "Cobalt - 23" "Royal - 19" "Navy Blue - 24" "Red - 15" "Wine - 20" "Purple - 22" "Pink - 69" "Neon Pink - 29"
"Neon Orange - 18" "Burnt Orange - 91" "Copper - 307" "Pink Aloha - 46" "Purplr Aloha - 42" "Green Aloha - 44" "Sand Camo - 30" "Ocean Camo - 32" "Green Camo - 31" "Green Hibiscus - 38"
"Red Hibiscus - 33" "Blue Hibiscus - 34" "Black Hibiscus - 35" "Grey Hibiscus - 215" "Island Blue - 50" "Island Mocha - 57" "Leopard - 411" "Carbon Fiber - 121" "Digital Gray - AC2" "RealTree Hardwoods - 259"
"Green Hardwoods - 516" "ReadTree MAX-5 - 505" "RealTree X-Tra - 527" "RealTree AP Pink"|-||-|"Select FULL Piping Color" "Please Select Here" "Baby Blue - 04" "Tan - 17" "Mocha - 235" "Taupe - 100" "Dark Brown - 26" "Charcoal - 11" "Light Gray - 21" "School Bus Yellow - 218" "Neon Yellow - 16" "Solar Yellow - 320" "Neon Green - 14"
"Turquoise - 10" "DK Kelly Green - 28" "Teal - 25" "Black - 12" "Cobalt - 23" "Royal - 19" "Navy Blue - 24" "Red - 15" "Wine - 20" "Purple - 22" "Pink - 69" "Neon Pink - 29"
"Neon Orange - 18" "Burnt Orange - 91" "Copper - 307" "Pink Aloha - 46" "Purplr Aloha - 42" "Green Aloha - 44" "Sand Camo - 30" "Ocean Camo - 32" "Green Camo - 31" "Green Hibiscus - 38"
"Red Hibiscus - 33" "Blue Hibiscus - 34" "Black Hibiscus - 35" "Grey Hibiscus - 215" "Island Blue - 50" "Island Mocha - 57" "Leopard - 411" "Carbon Fiber - 121" "Digital Gray - AC2" "RealTree Hardwoods - 259"
"Green Hardwoods - 516" "ReadTree MAX-5 - 505" "RealTree X-Tra - 527" "RealTree AP Pink"|-||-|"Question for MX-5 Miata Years 2006-2015 Only:
Do You have Seat Belt Brackets?" "Select Here" "I do not have a Miata years 2006-2015" "YES, I have Seat Belt Bracket for my Miata 2006-2015" "NO, I have Seat Belt Bracket for my Miata 2006-2015"|-||-|"Do you want Wallet/Cell Phone Pocket on the front of your Seat?" "Please Select Here" "No" "Yes, just the Driver side add(+$22)" "Yes, just the Passenger side add(+$22)" "Yes, to both Seats add(+$44)"|-||-|"Do you want Map Pockets for the back of your Seats?" "Please Select Here" "No" "Yes, just the Driver side add(+$22)" "Yes, just the Passenger side add(+$22)" "Yes to both Seats add(+$44)"|-||-|"Do you want Front Seat Lumbar Pump?"
"Please Select Here" "No" "Both Seat Backs add(+$120)" "Driver Seat Back add(+$60)" "Passenger Seat Back add(+$60)"|-||-|"Do you want Seat-Heater?"
"Please Select Here" "No" "Both Seat Backs(Requires 2 power outlets) add(+$290)" "Driver Seat Back add(+$145)" "Passenger Seat Back add(+$145)"|-||-|"Do you have Built-in Thigh Extender?"
"Please Select Here" "No Thigh Extender" "Built-in Thigh Extender"|-||-|||-||WL-FOG9920|,|NBLIGHTING|,|Mazda Miata MX-5 White Halo Fog Lamps Driving Lights Kit 1999-2005|,|WL-Fog9920|,|199.48|,|149.05|,||,||,||,||,||,||,|Mazda Miata MX-5 White Halo Fog Lamps Driving Lights Kit 1999-2005
Price for Pair
Experience the future of driving via an astonishing daylight-like visibility thanks to BlingLights BL-5000K proprietary light technology. Featuring a fog and driving, light-on-road pattern fused with Ultra-Bright White Halo Rings®, BL-5000K halo lamps can be easily seen in virtually any light including direct sunlight. You can also adjust the light for a unique experience.
The Light of Choice
Designed to imitate the appearance of ordinary dealership fog lamps, BL-5000K lamps light like original fog lamps and is compatible with the factory wiring and or light controls. In addition to increased visibility, BL-5000K includes everything needed to install, BlingLights’ BL-5000K fog and driving lamp kit includes a 3-function factory style toggle switch that blends cleanly into any flat surface within reach or out of sight.
BL-5000K Lamp Kit Specs:
- (2x) 55 Watt 5000K Xenon Lamps
- Built-in Ultra-Bright White LED Halo Rings
- Photometrically Designed Hardened Glass Lenses
- Thick Aluminum Metal Housings & Adjustable Mounting Brackets
- 3 Function Switch (I) Fog Lights (0) Off (II) Daytime Running Lights
- Complete Wiring Harness With Relay & Fuse
- Photo Installation Directions Plus Lifetime No-Fault Warranty
- Satisfaction Guaranteed or Your Money Back
This listing includes a complete fog & driving lamp kit for use on the model listed on both sides without the factory fog lamps or as a replacement for existing factory fog lamps. This listing includes everything needed to install and requires no other parts or extensive modification even if you don't already have the optional factory fog lamps.
Many of our customers are able to install our fog light kit in a period of approximately 45 minutes to 2 hours. More involved installations may require drilling to position the lights where you want them. This kit includes mounting brackets that mount independently of the factory mounting points. If you have plastic inserts currently covering your fog light holes then you will have to remove those to install this kit, which is required of any fog light kit installation. The end result will be a clean look if done with care. For those uncomfortable with the install, have the kit professionally installed at a local car stereo shop.
This kit has conducted extensive research and have sold hundreds of kits to customers with your same vehicle, with no fitment issues. Lamps are intended for installation within the factory fog lamp openings for vehicles without optional fog lights or as a direct upgrade replacement for the factory fog lights. The lights are meant to mount behind the factory pre-cut fog light holes from the inside of the bumper and kit includes everything needed to install for vehicles with or without factory fog lights.
The kit includes 2 lamp enclosures for left and right side, powerful H3-55 watt 5000K bulbs, 1999 2000 Mazda MX-5 White Halo Fog Lamps Driving Lights Miata NB Kit
|,|"Select Year" "Select Here" "1999-2000" "2001-2005"|-||-|||-||AGENCY-POWER-MID-LOWER-X-BRACE-MAZDA-MIATA-2006-2014|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata MX-5 X Brace by IL Motorsport 2006-2015|,|907-346|,|180.00|,|164.98|,||,||,||,||,||,||,|Mazda Miata MX-5 X Brace by IL Motorsport 2006-2015
When your performance driving habits require the ultimate in chassis strengthening, look now further than the solutions from IL Motorsport. All pieces are made from lightweight aluminum to keep performance to a maximum (rear PPF bar is steel). Four pieces go under your Miata, one in the engine bay, and one in the trunk. Keeping the convertible's chassis stiff helps the rest of your performance suspension perform at it's best
|,|||-||MAMIMXFIITFI|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX-5: Find It. Fix It. Trick It.|,|100-106|,|69.99|,|49.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX-5: Find It. Fix It. Trick It.
With its arrival in the United States in 1990, the Mazda Miata inspired the return of the open roadster. Though other makes and models followed, the Miata remains the convertible sports car of choice for budget-conscious enthusiasts, as popular in autocross and amateur racing circles as it is among pleasure drivers.This book shows readers how to make the most of any Miata: what to look for in a used model and how to perform common maintenance and repairs, as well as over 15 projects to improve performance and appearance. Focusing on the engine, wheels and tires, suspension, body kits, interior, and more, the projects include full details on required parts, cost, time, tools, and skill necessary for completion. With easy-to-follow directions and clear illustrations, this handy guide is a virtual road map for taking the Miata the full distance.
Author: Keith Tanner
Format: Softbound
Pages: 160
Length: 8.25w x 10.625h
|,|||-||MASTTELOKEYC|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX5 Black Carbon Fiber Texture Leather Key Chain|,|KC1550-MIA|,|21.99|,|16.95|,||,||,|0.000 |,||,||,||,|Mazda Miata MX5 Black Carbon Fiber Texture Leather Key Chain
Black Carbon Fiber Texture Leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||ALI-CARBON-FIBER-REAR-VIEW-ROOM-MIRROR-COVER|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata MX5 Carbon Fiber Side Mirror Cover 2016+|,|ali-sidemirror-cover|,|205.00|,|174.02|,||,||,||,||,||,||,|Mazda Miata MX5 Carbon Fiber Side Mirror Cover 2016+
PRODUCT DESCRIPTION
These cover fit on the side mirrors of your ND. Looks great with our other carbon fiber bits!
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
|,|"Drop ship fee" "add(+$9.95)"|-||-|||-||B61P-18-881A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata MX5 MT ECU ECM PCM Engine Computer Module 1990-1997|,|B61P-18-881A-B|,|389.95|,|299.02|,||,||,||,||,||,||,|Mazda Miata MX5 MT ECU ECM PCM Engine Computer Module 1990-1997
#1 IN ILLUSTRATION
Description: Miata mx5. Manual trans, Remanufactured Item
Manufacturer: Genuine Mazda Original Parts
|,|"Select Year" "Select Here" "1990-1993" "1994-1995" "1996-1997"|-||-|||-||909-085|,|NEW|,|Mazda Miata MX5 ND Garage Vary Style Carbon Fiber Ducktail Rear Spoiler 2016+|,|909-085|,|299.95|,|269.00|,||,||,||,||,||,||,|Mazda Miata MX5 ND Garage Vary Style Carbon Fiber Ducktail Rear Spoiler 2016+
-Material Type:Carbon fiber
-Item Dimension - Length:90inch x Width:10inch x eight:5inch
|,|||-||MAZDA-MIATA-NA-KW-COILOVER-KIT-V1-1990-1997|,|19MAMISUANDS|,|Mazda Miata NA KW Coilover Kit V1 1990-1997|,|10275001|,|1,429.99|,|1,299.99|,||,||,|0.000 |,||,||,||,|Mazda Miata NA KW Coilover Kit V1 1990-1997
KW Variant 1: Sporty - Balanced. With KW factory pre-set dampening.
The ideal system for customers who like to choose the customer lowering of their vehicles while counting on the extensive driving tests of our experienced engineers who have preset the dampers for the ultimate balance between sporty driving, comfort and safety.
KW Coilover Kit V1 Mazda Miata NA
|,|"Shipping Cost" "add(+$95)"|-||-|||-||CM-DP1-NA-A|,|NASEATSDOOR|,|Mazda Miata Naked Acrylic Door Panels 1990-2005|,|MS-908-240|,|149.99|,|129.95|,||,||,||,||,||,||,|Mazda Miata Naked Acrylic Door Panels 1990-1997
Offer your NA or NB Miata the gift of these high-quality handmade door panels. Made of extremely durable and weather-proof ABS plastic, the panels are the correct factory thickness. Compared to the flimsy cardboard panels supplied by the factory, they do not get warped or misshapen due to wet weather.
The panels feature an attractive textured side and a smooth side that has all the options from the NA half-cut into the back. These option markings do not go all the way through, so if you do not need them, you will not have unwanted holes in your panel. You can use a flat-head screwdriver to pop the sections out, or simply trace these cut-outs with a knife. The door panels come with instructions, and a sticker packaged in a poly bag.
The NB panels are completely custom and can bolt on to the factory NA upper panels converting your NB to a flat NA style. The door panels come with instructions, stainless mounting hardware and a sticker packaged in a poly bag.
Door Panels for the NA and NB are sold as a matched pair for the right and left. Application specific.
Here are some options for you to customize the panels to your liking:
arm rest/door pull 3-hole style
door pull, banana 2-hole style
manual window hole
special edition LE speaker grille mounting holes
90/93 2-piece panel cut out for speaker surround
94/95 4-tab speaker grilles
95/97 bolt-on speaker grilles
97 upper panel cutouts for shoulder support
Note:
The speaker hole on the NB door panel is the 8" Bose-style. Any aftermarket 8" grille (not included) will cover these fine.
You will need to use your factory uppers, and the factory plastic attachment clips. The uppers screw to the new panels just like the factory panels, and the clips simply slide into the provided holes, just like the factory panels.
|,|"Select Year" "Select Here" "1990-1997" "1999-2005"|-||-|||-||NAWOPABRHA|,||,|Mazda Miata Nardi Wood Parking Brake Handle|,|907-428|,|249.99|,|199.95|,||,||,|0.000 |,||,|rfger|,||,|These Mazda Miata Nardi Wood Parking Brake Handle are for years 1990-1997.
Note: Mazda has discontinitued the 1999-2003 Nardi Wood Parking Brake Handle. See below for other hand brakes.
|,|||-||MAZDA-MIATA-NB-KW-COILOVER-KIT-V1-1999-2003|,|19MAMISUANDS6|,|Mazda Miata NB KW Coilover Kit V1 1999-2005|,|10275002|,|1,429.99|,|1,299.99|,||,||,|0.000 |,||,||,||,|Mazda Miata NB KW Coilover Kit V1 1999-2005
KW Variant 1: Sporty - Balanced. With KW factory pre-set dampening.
The ideal system for customers who like to choose the customer lowering of their vehicles while counting on the extensive driving tests of our experienced engineers who have preset the dampers for the ultimate balance between sporty driving, comfort and safety.
KW Coilover Kit V1 Mazda Miata NB
|,|"Application" "Mazda Miata 1999-2005"|-||-|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MIATA-NC1-KW-COILOVER-KIT-V1-2006-2014|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata NC1 KW Coilover Kit V1 2006-2014|,|10275009|,|1,779.99|,|1,519.00|,||,||,|0.000 |,||,||,||,|Mazda Miata NC1 KW Coilover Kit V1 2006-2014
KW Variant 1: Sporty - Balanced. With KW factory pre-set dampening.
The ideal system for customers who like to choose the customer lowering of their vehicles while counting on the extensive driving tests of our experienced engineers who have preset the dampers for the ultimate balance between sporty driving, comfort and safety.
KW Coilover Kit V1 Mazda Miata NC1
|,|"Application" "Mazda Miata NC1 2006-2014"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||MAZDA-MIATA-NC1-KW-COILOVER-KIT-V3-2006-2014|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata NC1 KW Coilover Kit V3 2006-2014|,|35275009|,|2,669.99|,|2,289.00|,||,||,|0.000 |,||,||,||,|Mazda Miata NC1 KW Coilover Kit V3 2006-2014
KW Variant 3: Race technology for the road, with adjustable compression and rebound dampening.
State of the art motorsport technology enables better performance on the streets. The independently adjustable compression and rebound dampening allows for cutom driving setups.
The exclusive KW patented system has dual level valves that allow for adjustment of the rebound dampening for your road comfort and the compression dampening that controls the driving dynamics.
KW Coilover Kit V3 Mazda Miata NC1
|,|"Application" "Mazda Miata NC1 2006-2014"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||MAZDA-MIATA-ND---RF-WIND-DEFLECTOR-2016-|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata ND Wind Deflector 2016+|,|mazda-miata-nd---rf-wind-deflector-2016-|,|339.95|,|289.00|,||,||,||,||,||,||,|Mazda Miata ND Wind Deflector 2016+
This new accessory for the Mazda Miata and Fiat spider is a one-of-a-kind product.
It is the only fully personalized convertible wind deflection device of its kind.
Our design is constructed from stainless steel and has an elegant powder coated finish that looks like it belongs on the rear panel. We’ve developed a system that will allow you to snap the wind deflector into place using the same holes as the factory wind blocker uses. This makes for a very simple installation process. Over the last 10 years we’ve developed a very durable PMMA Blended Glass material that is an incredible 3/8” thick so you will not have to worry about vibrations or movement of the screen once installed. Our engineering process and design quality is what has set us apart as leaders in the convertible wind blocking industry today. Beyond that though, we stand behind our products 100% with a full lifetime warranty and after-sales support. We are available through live chat 24/7 on our website as well as offer phone support during business hours. We also enjoy meeting our customers here at our production facility and show room in Dallas Texas.
There are standard graphics available or you can choose to add your own personalized designs. Our patented products include a very rare ambient lighting effect that will have people turning their heads at every stoplight and car show. None of the super bright neon lights, our products have more of an ambient subtle glow to them. You can add on the color changing system with built in intensity control when you place your order. This is a must-have for all car club members that want to represent their club. Are you a business owner? You can have your business logo and information put on the deflector to help get your brand exposed. These roadsters deserve nothing but the best so do not settle for one of the cheap imitations that has Velcro straps and cheap plastic that will turn yellow over the years. We are the only dedicated convertible wind deflector manufacturer in North America with a team of professionals and a state-of-the-art facility.
We do offer two versions, a large and a small. The large version will block more wind than the factory wind blocker and there is more room for graphics if that is what you are after. The smaller version has the cut out in the center just like the OEM version so that folks with a manual top can reach over and grab their top while they are still sitting in the driver's seat. So if reaching your top while you are still in the driver's seat is important to you you may want to go with the small version which also looks really cool. Both versions will block more back draft than the OEM plastic deflector because it is solid and does not have holes in it. The extra turbulence that it will reduce will allow you to hear your stereo better and carry on a conversation better even at high speeds.
Our product comes with a lifetime warranty and we will stand behind it 100%. It is guaranteed to never crack, fade or turn yellow like some of the cheaper models that are on the market. Stop by our website today and check out some of our testimonials so that you can see firsthand what customers hours saying about our rare and innovative products. Have questions? Feel free to call us and talk to one of our professionals. 972-487-5987. We also have an installation tech line if you need any installation assistance whatsoever. Our trained professionals can walk customers through anything that comes up with our products.
Power for the illumination system can be picked up from a wire that is behind a panel directly behind your seat. We send step-by-step instructions along with photos in every order so that you can follow along. No splicing or stripping of wires is necessary we send vampire tap clamps so that the power is easily picked up. When finished with the installation there will be no wires exposed at all in your vehicle. Being convertible owners ourselves we know that quality is important with accessories and that is why we spend extra time on our engineering process.
|,|"Select Option" "Select Here" "Clear" "Clear Illuminated add(+$35)" "Etched Only add(+$35)" "Etched & Illuminated add(+$65)"|-||-|"Select Deflector Style" "Select Here" "Factory/OEM Shape" "Larger Shape" "Retractable Fastback Larger Shape"|-||-|"Select an Etching Design" "Miata" "MX-5" "Roadster"|-||-|"Select Illumination Color" "Select Here" "Red" "Blue" "White" "Green" "Orange" "Color Changing Illumination with Remote add(+$105)"|-||-|"Handling fee" "add(+$9.99)"|-||-|||-||901-305|,|NEW|,|Mazda Miata New & Improved Cat-Back Performance Exhaust by Cobalt 1990-1997|,|901-305|,|545.95|,|524.95|,||,||,||,||,||,||,|Mazda Miata New & Improved Cat-Back Performance Exhaust by Cobalt 1990-1997
Treat your Miata to one of the finest sport exhausts! The NA Single Tip exhaust is the best blend of practicality and looks. Along with an extensive host of features normally found in more expensive exhaust systems, this cat-back exhaust also adds a classy appeal to your sports car and shows off laser-etched Cobalt script-logo on its polished stainless-steel body that shines like chrome. With a sporty exhaust note, Cobalt's NA Single Tip Exhaust is the perfect piece of eye candy for your favorite Roadster. Replace your exhaust system with this one of a kind performance system at a truly affordable price!
Note: If you have a 1990-1995 (OBD 1) car, you must buy a Bung Plug for O2 Sensor, part # 051-012.
Features:
- 1.2 mm thick polished Stainless Steel used for muffler shell, tips, and piping
- 2-1/4'' Pipe Diameter
- CNC cut Stainless steel flanges
- Beautifully shaped oval Muffler
- Stainless Steel for inner core and perforated tubing
- Entire muffler completely polished to a mirror shine
- All welds on muffler are ground smooth and polished
- Sporty 3-1/2" slash cut insulated and polished muffler tip
- Muffler packing is a combination of stainless steel wool and fiberglass for a perfect sports car sound that is never intrusive
- 5 Year Warranty*
Warranty: *This muffler is warranted to the original purchaser of record and for the original vehicle on which the product was installed, against defects in materials and workmanship for 5 years. Moss' sole obligation under this warranty shall be limited to repair or replacement at Moss' option, provided that the muffler discloses a manufacturing defect. Warranty is void if any defects are caused by a physical impact of any kind.
|,|"Bung Plug for O2 Sensor" "Select Here" "Yes add(+$8.98)"|-||-|"Shipping cost" "add(+$95)"|-||-|||-||MAZDA-MIATA-NOS-EFI-NITROUS-SYSTEM-1990-2005|,|19MAMIENPEVI|,|Mazda Miata NOS EFI Nitrous System 1990-2005|,|090127487471|,|905.95|,|810.02|,||,||,||,||,||,||,|Mazda Miata NOS EFI Nitrous System 1990-2005
UPC: 090127487471
Delivery Style: Air intake tube
Nitrous System Style: Dry
Nitrous System Intended Fuel Type: Gasoline
Maximum Advertised Horsepower Increase: 75
Activation: Microswitch
Jet Sizes Included (hp): 40, 75
Dual Stage: No
Bottle Included: Yes
Nitrous Bottle Capacity: 10 lbs.
Bottle Material: Aluminum
Bottle Color: Blue
Bottle Brackets Included: Yes
Bottle Bracket Material: Steel
Quantity: Sold as a kit.
There's no reason why you can't give your sport compact a major power boost using the same sort of technology that the V-8 crowd has been for years. NOS has taken care of that with their Sport Compact nitrous-oxide systems. They can turn your mild-mannered ride into a fire-breather with a quick shot of 40-75 extra horsepower, with a dry system, or an even wilder 50-150 extra ponies with a wet system. The latter types are especially helpful to supercharged and turbocharged engines, which generate heavy doses of unwanted heat in the intake system. Kits come complete with the mounting brackets, nozzle, stainless-braided hose, fittings, jets, wiring, switches, and mounting hardware.
|,|"Shipping and Handling" "add(+$85)"|-||-|||-||CARB-A591NRG|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata NRG Carbon Fiber Spoiler Wing|,|CARB-A591NRG|,|879.99|,|745.99|,||,||,||,||,||,||,|Mazda Miata NRG Carbon Fiber Spoiler Wing
Carbon Fiber Spoiler is made with high lightweight carbon fiber glass in chopped carbon layout. The wing is designed to reinforce strength and exterior appearance of the vehicles. Aerodynamic includes fuel efficiancy and reduces of drag.
- Special NRG aggressive side mounts
- Wing 59" length
- Wing 11" width
- Stand LxWxH: 3.5""x 7" x 14.75"
- Largest distance between the two stands 29"
Comes with all components and bolts. Professional installation is highly recommended.
|,|"Shipping & Handling" "add(+$119)"|-||-|||-||MR-CBS-MMX590|,|NEW|,|Mazda Miata OE-RS Sports Muffler 1990-1997|,|MR-CBS-MMX590|,|599.00|,|418.00|,||,||,||,||,||,||,|Mazda Miata OE-RS Sports Muffler 1990-1997
Megan Racing OE-RS series cat backs are based on factory style, with bigger piping, OEM style polished mufflers and quiet sound. The cat back system is made stainless steel. All piping are mandrel bent with a high polished finish. Exhaust system comes with all the necessary hardware needed for a direct bolt on installation. Improves HP with minimal noise.
SPECIFICATIONS & FEATURES:
- Application: 1990-1997 Mazda Miata MX-5
- Includes one o2 sensor bung shortly after the catalytic converter for 94/95 and up models. 1.8L applications will need to remove some undercarriage bracing.
- T304 Stainless Steel with mandrel bends to clear all diff carriers, 1.6L and 1.8L alike.
- 2 3/8" piping to maximize power in higher RPM range while still producing improved mid-range power (tested with timing advanced to 13-14 degrees)
- 3.5" muffler tip; silencer included
- Direct bolt-on application, gaskets and hardware are included.
Our Megan Racing exhaust system can be used on 90-97 vehicles as it includes an extra o2 bung post-catalytic converter.
|,|"Shipping cost" "add(+$85)"|-||-|||-||N243-V4-990|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Mazda Miata OEM Air Deflector For Front Air Dam 2016+|,|N243-V4-990|,|29.91|,|24.02|,||,||,||,||,||,||,|Mazda Miata OEM Air Deflector For Front Air Dam 2016+
This Air Deflector For Front Air Dam is a genuine OEM Mazda part #N243-V4-990 and carries a factory warranty. We offer the best online prices with fast shipping on any order placed with us.
|,|||-||BPE8-13-331B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata OEM AIR DUCT 1994-1997|,|BPE8-13-331B|,|231.18|,|187.02|,||,||,||,||,||,||,|Mazda Miata OEM AIR DUCT 1994-1997
Other Names: Pipe Air Intake
#11 on the Diagram
|,|||-||BPE8-13-200|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata OEM AIR INLET DUCT1994-1997|,|bpe8-13-200|,|93.66|,|73.02|,||,||,||,||,||,||,|Mazda Miata OEM AIR INLET DUCT1994-1997
Other Names: Duct Fresh Air
#8 on the Diagram
|,|||-||NC11-61-140A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata OEM BLOWER ASSEMBLY 1994-2005|,|nc11-61-140a|,|513.25|,|409.95|,||,||,||,||,||,||,|Mazda Miata OEM BLOWER ASSEMBLY 1994-2005
Other Names: Blower Unit
Description: Without ac.
|,|||-||0000-8K-D33|,|MIATA-OEM-INTERIOR-PARTS-2016-|,|Mazda Miata OEM Cargo Net 2016|,|OEM-0000-8K-D33|,|69.95|,|54.02|,||,||,||,||,||,||,|Mazda Miata OEM Cargo Net 2016
Manufacturer: Mazda
Part Number: 0000-8K-D33
Part: CARGO NET
|,|||-||0000-8B-D31A|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata OEM Cargo Tray All Weather 2016+|,|0000-8B-D31A|,|95.99|,|79.02|,||,||,||,||,||,||,|Mazda Miata OEM Cargo Tray All Weather 2016+
Genuine Mazda Original Parts
Cargo Tray All Weather 2016
|,|||-||BPS1-18-221|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata OEM CRANKSHAFT POSITION SENSOR 1996-2005|,|BPS1-18-221|,|137.95|,|113.02|,||,||,||,||,||,||,|Mazda Miata OEM CRANKSHAFT POSITION SENSOR 1996-2005
1996-1997: BPS1-18-221
1999-2005: BP4W-18-221B
|,|"Select Year" "Select Here" "1996-1997" "1999-2005 add(+$20)"|-||-|||-||NA75-61-190C|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata OEM DASH CONTROL UNIT 1994-1997|,|na75-61-190c|,|332.55|,|239.30|,||,||,||,||,||,||,|Mazda Miata OEM DASH CONTROL UNIT 1994-1997
Other Names: Control Heater
|,|||-||B6BF-20-300-9U|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata OEM EGR VALVE 1994-1997|,|B6BF-20-300-9U|,|346.87|,|272.02|,||,||,||,||,||,||,|Mazda Miata OEM EGR VALVE 1994-1997
PRODUCT DETAILS
Positions: Front
Other Names: Front Wiper Switch, Drive Shaft, 1ST-2ND Gear Hub & Sleeve, Alternator
Description: Miata mx5. 4 cylinder. Auto trans. Without tilt wheel.
Manufacturer: Genuine Mazda Original Parts
|,|||-||NC10-50-0K0B|,|NBBODYSTYLING|,|Mazda Miata OEM Front Bumper Retainer 1999-2000|,|NC10-50-0K0B|,|188.45|,|152.02|,||,||,||,||,||,||,|Mazda Miata OEM Front Bumper Retainer 1999-2000
PART CAN BE FOUND AS REFERENCE #22 IN ILLUSTRATION
|,|||-||B61P13ZE1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata OEM FUEL PUMP FILTER 1990-1997|,|B61P-13-ZE1|,|49.78|,|39.98|,||,||,||,||,||,||,|Mazda Miata OEM FUEL PUMP FILTER 1990-1997
1990-1997 Mazda Miata Fuel Screen, Fuel Pump Strainer
|,|||-||NC-OEM-CIG-CUPHOLDER|,|20MAMIINAC|,|Mazda Miata OEM Genuine Mazda Ash Tray Cup Holder 2006-2015|,|OEM-N121-V0-881F|,|29.95|,|25.51|,||,||,|0.000 |,||,||,||,|Mazda Miata OEM Genuine Mazda Ash Tray Cup Holder 2006-2015
Add convenience to your MX-5 with this removable Ashtray. Fits door pocket cup holder.
If you are looking for a great Miata MX-5 Miata Ashtray, look no further than this Genuine Mazda Ashtray! It takes the place of your door pocket cupholder.
Don't settle for cheap imitations, this is the genuine article and fits perfectly!
Only fits MX-5 Miata years 2006-2015
|,|||-||NA01-64-030E-00|,|NADASHBOARD|,|Mazda Miata OEM Glove Box 1990-1993|,|NA01-64-030E-00|,|168.52|,|136.02|,||,||,||,||,||,||,|Mazda Miata OEM Glove Box 1990-1993
#6 IN ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|||-||NA01-51-SBX|,|NAEXLI|,|Mazda Miata OEM Headlamp Motor Assembly 1990-1997|,|NA01-51-SBX|,|388.56|,|329.02|,||,||,||,||,||,||,|Mazda Miata OEM Headlamp Motor Assembly 1990-1997
PART CAN BE FOUND AS REFERENCE #16 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver's Side (NA01-51-SBX)" "Passenger's Side (NA01-51-SAX)" "Both Driver's and Passenger's Side add(+$329.02)"|-||-|||-||NH18-79-EGX|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Mazda Miata OEM In-Dash 6-Disc CD/MP3 Changer 2012-2015|,|NH18-79-EGX|,|545.99|,|455.88|,||,||,||,||,||,||,|Mazda Miata OEM In-Dash 6-Disc CD/MP3 Changer 2012-2015
Also Known As:
MP3 CD Changer Non-Bose
Manufacturer:
Genuine Mazda Original Parts
This Part Also Fits
Mazda MX-5 Miata 2015 25th Anniversary Edition, Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2014 Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2013 Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2012 Grand Touring, Special Edition, Sport, Touring 2.0L L4 - Gas
|,|||-||C9FA-V6-029|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Mazda Miata OEM Ipod Integration 2009-2015|,|BBM2-79-CFZA|,|175.95|,|142.70|,||,||,||,||,||,||,|Mazda Miata OEM Ipod Integration 2012-2015
Also Known As:
Ipod Harness W O Sat
This Part Also Fits
Mazda MX-5 Miata 2015 25th Anniversary Edition, Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2014 Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2013 Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2012 Grand Touring, Special Edition, Sport, Touring 2.0L L4 - Gas
|,|||-||QNDB-56-3A1|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata OEM Lower Arm Bar 2016-2019+|,|QNDB-56-3A1|,|585.95|,|269.90|,||,||,||,||,||,||,|Mazda Miata OEM Lower Arm Bar 2016+-2019+
Our high strength steel Lower Arm Bar suppresses unwanted vehicle contortions, which results in
improved handling and increased traction for your MX-5.
|,|||-||B6BF-13-215|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata OEM MASS AIR FLOW SENSOR 1993-1997|,|B6BF-13-215|,|989.15|,|769.95|,||,||,||,||,||,||,|Mazda Miata OEM MASS AIR FLOW SENSOR 1993-1997
Other Names: Air Mass Sensor, Sensor Air Flow
#12 on the Diagram
|,|||-||0000-8M-D10|,||,|Mazda Miata OEM Oil Filler Cap 2016-2019+|,|OEM-0000-8M-D10|,|79.95|,|79.95|,||,||,||,||,||,||,|Mazda Miata OEM Oil Filler Cap 2016-2019+
Fill up on style and make a bold statement with Mazda's Oil Filler Cap.
Genuine Mazda Original Parts
|,|||-||N124-V8-190F|,|MIATA-OEM-INTERIOR-PARTS-2006-2015|,|Mazda Miata OEM Parking Brake Handle 2012-2015|,|N124-V8-190F|,|149.95|,|128.05|,||,||,||,||,||,||,|Mazda Miata OEM Parking Brake Handle 2012-2015
Your MX-5's parking brake will look great with one of these accenting grips. Aluminum and Leather
|,|||-||19901997|,|GENUINEMAZDA1|,|MAZDA MIATA OEM PARTS (1990-1993)|,||,||,||,||,||,||,||,||,||,||,|||-||19992005|,|GENUINEMAZDA1|,|MAZDA MIATA OEM PARTS (1994-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||20062009|,|GENUINEMAZDA1|,|MAZDA MIATA OEM PARTS (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||NC10-50-071A|,|NBBODYSTYLING|,|Mazda Miata OEM Reinforcement Bumper 1999-2000|,|NC10-50-071A|,|213.73|,|165.98|,||,||,||,||,||,||,|Mazda Miata OEM Reinforcement Bumper 1999-2000
PART CAN BE FOUND AS REFERENCE #18 IN ILLUSTRATION
|,|||-||NA01-61-B15|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata OEM RESISTOR 1990-2005|,|na01-61-b15|,|58.57|,|47.02|,||,||,||,||,||,||,|Mazda Miata OEM RESISTOR 1990-2005
Other Names: Resistor Blower
Description: Miata mx5.
#5 on the Diagram
|,|||-||MAZDA-MIATA-OEM-STYLE-CARBON-FIBER-HARD-TOP-1990-2005|,|SHOP-BY-SALE|,|Mazda Miata OEM Style Carbon Fiber Hard Top 1990-2005 - Sale!|,|90MZMX52DOE-030C|,|3,499.99|,|2,945.00|,||,||,|0.000 |,||,||,||,|Mazda Miata OEM Style Carbon Fiber Hard Top 1990-2005
Go Miata is an authorized dealer of VIS. This is an authentic VIS carbon fiber hard top. Mazda Miata OEM Style Vis Carbon Fiber Hard Top provides spectacular enhancement for your car, simply let your car become the center of attraction.
◾Grade A, brand new carbon fiber hard top made from finest carbon fiber available
◾Ultra-light weight
◾New extra one piece plastic fiber under skeleton, stronger design
◾Special ultra U.V protection coating, hold its high gloss show-quality finish, will not fade
◾Extra clear coat provides "shining wet look"
◾Single sheet tight carbon fiber weave
◾Smooth rolled carbon edges
◾Can be painted or partially painted
◾Come with real authenticity badge attached on the hard top
◾Professional and double packaging to minimize delivery damage
|,|"With Window & Hardware Kit" "Select Here" "No" "Yes, add(+$685)"|-||-|"Freight Cost" "add(+$425)"|-||-|||-||MAZDA-MIATA-2D-OEM-STYLE-CARBON-FIBER-HOOD-1999-2005|,|NBACCESSORIES|,|Mazda Miata OEM Style Carbon Fiber Hood 1999-2005|,|99MZMX52DOE-010C|,|1,855.00|,|1,609.00|,||,||,|0.000 |,||,||,||,|Mazda Miata 2D Oem Style Carbon Fiber Hood 1999-2005
1999-2005 Mazda Miata 2D Oem Style Carbon Fiber Hood. VIS Carbon Fiber Hoods and Trunks are made from the finest carbon fiber material available. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer utilizes a 100% ISO certified, Grade A carbon fiber material. The carbon fiber material is bonded to the hood using a high grade epoxy resin , and then finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating to ensure a high gloss finish. Marrying aesthetics and functions, we pioneered the use of one-piece, smooth underside shell which complements the fine finish on top, and at the same time strengthens the product’s structural integrity. The edges of each hood or trunk are meticulously smoothed by hands to insure high-quality finish all around. The result is a carbon product that is unparalleled and excels above all else in quality, durability, and aesthetics. All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|,|"Freight Cost" "add(+$349)"|-||-|||-||MAZDA-MIATA-OEM-STYLE-CARBON-FIBER-TRUNK--1990-1997|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Mazda Miata OEM Style Carbon Fiber Trunk 1990-1997|,|90MZMX52DOE-020C|,|1,055.00|,|920.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Oem Style Carbon Fiber Trunk 1990-1997
1990-1998 Mazda Miata Oem Style Carbon Fiber Trunk . VIS Carbon Fiber Hoods and Trunks are made from the finest carbon fiber material available. All VIS Carbon Fiber Hoods and Trunks are manufactured using a two-part construction design. The top layer utilizes a 100% ISO certified, Grade A carbon fiber material. The carbon fiber material is bonded to the hood using a high grade epoxy resin , and then finished with an ultra-clear (Poly Shield), UV-protective polyurethane coating to ensure a high gloss finish. Marrying aesthetics and functions, we pioneered the use of one-piece, smooth underside shell which complements the fine finish on top, and at the same time strengthens the product’s structural integrity. The edges of each hood or trunk are meticulously smoothed by hands to insure high-quality finish all around. The result is a carbon product that is unparalleled and excels above all else in quality, durability, and aesthetics. All VIS Carbon Fiber Hoods and Trunks come with a VIS badge of authenticity. Please be sure to look for the badge when purchasing. Due to the unknown nature of the intended uses of these products, hood pins are required. These products are intended for off-road use only, unless your local and state laws state otherwise.
|,|"Freight Cost" "add(+$225.00)"|-||-|||-||909-350|,|NAEXAC|,|Mazda Miata OEM Style Factory Design Replacement Mirrors by IL Motorsport 1990-1997|,|909-350|,|209.99|,|178.95|,||,||,||,||,||,||,|Mazda Miata OEM Style Factory Design Replacement Mirrors by IL Motorsport 1990-1997
With age our Miata side mirrors get tired, or perhaps they're frozen in place - or maybe they've even been damaged. These factory look replacement mirror from ILM have their internals completely redone in stainless steel parts. And now you can have the option of having a set that's ready to paint to match your car. This Part is Unpainted!
|,|||-||MAZDA-MIATA-OEM-STYLE-FIBERGLASS-HARD-TOP-1990-2005|,|SHOP-BY-SALE|,|Mazda Miata OEM Style Fiberglass Hard Top 1990-2005 - Sale!|,|90MZMX52DOE-030|,|2,799.99|,|2,145.00|,||,||,|0.000 |,||,||,||,|Mazda Miata OEM Style Fiberglass Hard Top 1990-2005
Go Miata is proud to provide you this brand new, high quality Miata fiberglass hard top. It offers strong manufacture construction and uniform thickness. Go Miata has strict quality control on factory and part provider which ensure you will receive excellent fitment products. This Mazda Miata Oem Style Fiberglass Hard Top definitely can make your car look extraordinary.
* High quality multi-layer material.
* Made by high quality and smooth layered fiberglass.
* Brand New, Grade A quality - Best Fit
* Direct replacement to factory hardtop
* Does not expand or shrink with temperature change
* Does not absorb water / moisture
* Reduce overall weight
* Smooth gel coat finish
* Optional hardware kits include window, front and side brackets, plastic weather seals and gaskets.
* Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified.
* Pieces do not come painted
|,|"With Window & Hardware Kit" "Select Here" "No" "Yes, add(+$685)"|-||-|"Freight Cost" "add(+$425)"|-||-|||-||MIOEMSECAHO1|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Mazda Miata OEM Style Seibon Carbon Hood 1990-1997|,|SD-SB-HD-MIA90OE|,|1,490.00|,|1,292.00|,||,||,|100.000 |,||,||,||,|Mazda Miata OEM Style Seibon Carbon Hood 1990-1997
Why buy a carbon fiber hood?
Carbon fiber hoods give cars a fantastic custom race look that is very popular. Carbon fiber hoods come with a clear gelcoat that allows you to see the clean weave of the carbon fiber and that makes it so you don't have to paint your hood. Additionally, carbon fiber hoods are almost always lighter than factory hoods, so they can help you improve performance. Vented carbon hoods are a great option because they relieve your engine of trapped heat, are lighter weight than factory hoods, and give your car a race car appearance.
Will I have to paint my carbon fiber hood when I receive it? No. In fact, for a lot of people the whole reason for buying a carbon hood is to get that new-age cutting edge race look. The hood has a clear-coat finish and can literally be installed on your car out of the box. Because carbon hoods are made to be installed without painting, they are often a more affordable option than fiberglass or steel hoods after you account for the paint cost. (For anyone who really wants to paint a carbon hood, it is indeed possible since the clear coat finish responds well to primer.)
Are there different "grades" or qualities of carbon fiber hoods? Yes. The terms carbon is used loosely. Some companies make the entire hood (skin and skeleton) out of carbon. This is rare since carbon is an expensive material. Some manufacturers make the hood skin out of carbon, and make the skeleton out of fiberglass. Some companies make their hoods out of fiberglass, and paint it to look like carbon fiber, but call them carbon fiber hoods (but of course, they are just a carbon look, not actual carbon fiber). To know what "grade" a carbon hood is made of, look for details in the product description or manufacturer description.
How do you install a carbon fiber hood?
Carbon fiber hoods are usually OEM fit and finish which means un-bolting your factory hood and replacing it with the new lightweight carbon hood. Little to no modification is needed to get these to fit properly, and they often come with OEM metal latches for an easy installation. Nevertheless, hood pins are recommended for use with all carbon fiber hoods.
Do you have to buy hood pins if you buy a carbon fiber hood? Hood pins are not necessary when buying a carbon fiber hood if it comes with an OEM metal latch, but we do recommend them as a safety precaution. They are sold separately on our website. If the carbon fiber hood does not come with a latch, hood pins are mandatory to be able to close your hood. We always suggest buying hood pins when purchasing any light-weight hood for peace of mind; you don't want any chance of your hood flying into your windshield while you're cruising along on the highway!
|,|"Freight Cost" "add(+$349)"|-||-|||-||MIOEMVISCAHO|,|MIATA-OEM-EXTERIOR-PARTS-1990-1997|,|Mazda Miata OEM Style VIS Carbon Hood 1990-1997|,|SD-VIS-HD-MIA90OE|,|799.99|,|639.95|,||,||,|200.000 |,||,||,||,|Mazda Miata OEM Style VIS Carbon Hood 1990-1997
Why buy a carbon fiber hood?
Carbon fiber hoods give cars a fantastic custom race look that is very popular. Carbon fiber hoods come with a clear gelcoat that allows you to see the clean weave of the carbon fiber and that makes it so you don't have to paint your hood. Additionally, carbon fiber hoods are almost always lighter than factory hoods, so they can help you improve performance. Vented carbon hoods are a great option because they relieve your engine of trapped heat, are lighter weight than factory hoods, and give your car a race car appearance.
Will I have to paint my carbon fiber hood when I receive it? No. In fact, for a lot of people the whole reason for buying a carbon hood is to get that new-age cutting edge race look. The hood has a clear-coat finish and can literally be installed on your car out of the box. Because carbon hoods are made to be installed without painting, they are often a more affordable option than fiberglass or steel hoods after you account for the paint cost. (For anyone who really wants to paint a carbon hood, it is indeed possible since the clear coat finish responds well to primer.)
Are there different "grades" or qualities of carbon fiber hoods? Yes. The terms carbon is used loosely. Some companies make the entire hood (skin and skeleton) out of carbon. This is rare since carbon is an expensive material. Some manufacturers make the hood skin out of carbon, and make the skeleton out of fiberglass. Some companies make their hoods out of fiberglass, and paint it to look like carbon fiber, but call them carbon fiber hoods (but of course, they are just a carbon look, not actual carbon fiber). To know what "grade" a carbon hood is made of, look for details in the product description or manufacturer description.
How do you install a carbon fiber hood?
Carbon fiber hoods are usually OEM fit and finish which means un-bolting your factory hood and replacing it with the new lightweight carbon hood. Little to no modification is needed to get these to fit properly, and they often come with OEM metal latches for an easy installation. Nevertheless, hood pins are recommended for use with all carbon fiber hoods.
Do you have to buy hood pins if you buy a carbon fiber hood?
Hood pins are not necessary when buying a carbon fiber hood if it comes with an OEM metal latch, but we do recommend them as a safety precaution. They are sold separately on our website. If the carbon fiber hood does not come with a latch, hood pins are mandatory to be able to close your hood. We always suggest buying hood pins when purchasing any light-weight hood for peace of mind; you don't want any chance of your hood flying into your windshield while you're cruising along on the highway!
|,|||-||B6BF13655|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata OEM Throttle Body Gasket 1990-2005|,|B6BF13655|,|7.79|,|6.70|,||,||,||,||,||,||,|Mazda Miata OEM Throttle Body Gasket 1994-2005
|,|"Select Year" "Select Here" "1990-1993 (B6S713655 )" "1994-2005 (B6BF13655)"|-||-|||-||CM-BT1-ND|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Mazda Miata OEM Trunk ND 2016|,|CM-BT1-ND|,|512.05|,|374.00|,||,||,||,||,||,||,|Mazda Miata OEM Trunk ND 2016
This trunk replaces the Miata OEM aluminum trunk. Made with high quality carbon fiber, it only weighs 3.3 KG (7 Pounds). It replicates the ND trunk exactly including the inner structure.
Specifications (for the carbon fiber version):
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
*Availability: 8-10 Weeks production time
|,|"Select Option" "Fiberglass" "Carbon Fiber add(+$165)" "Carbon Kevlar add(+$182)"|-||-|"Shipping Cost" "add(+$130.00)|-||-|||-||QNDA-56-3A1|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata OEM Tunnel Under Bars 2016-2017|,|QNDA-56-3A1|,|1,352.09|,|1,125.95|,||,||,||,||,||,||,|Mazda Miata OEM Tunnel Under Bars 2016--2017
Our Tunnel Under Bars are designed to integrate perfectly with your standard MX-5 crossbar
to suppress unwanted body flex and twisting caused by cornering. This gives you
more traction and improved handling performance, allowing you to keep momentum through turns.
If vehicle is an Automatic Transmission, need to order 2 pcs of service part 9YA42-0809A (2 bolt pieces)
|,|"Shipping & Handling" "add(+$145)"|-||-|||-||MAOEMWHAC|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|Mazda Miata OEM Wheel Accessories|,||,||,||,||,||,||,||,||,||,||,|||-||WHEEL-LOCKS---MAZDA--0000-88-BLK-BP-|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Mazda Miata OEM Wheel Locks 2014-2019|,|Mazda-OEM-0000-88-BLK-BP|,|68.95|,|52.02|,||,||,||,||,||,||,|Mazda Miata OEM Wheel Locks 2014-2019
Manufacturer:
Genuine Mazda Original Parts
|,|||-||KD51-37-190|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata OEM Wheels Center Cap 2013-2015|,|KD51-37-190|,|11.91|,|9.02|,||,||,||,||,||,||,|Mazda Miata OEM Wheels Center Cap 2014-2016
Also Known As:
Cap Center
This Part Also Fits:
Mazda MX-5 Miata 2015 25th Anniversary Edition, Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2014 Club, Grand Touring, Sport 2.0L L4 - Gas
Mazda MX-5 Miata 2013 Club, Grand Touring, Sport 2.0L L4 - Gas
|,|||-||0000-8M-D11A|,||,|Mazda Miata OEM Windshield Sunscreen 2016|,|0000-8M-D11A|,|59.95|,|49.95|,||,||,||,||,||,||,|Mazda Miata OEM Windshield Sunscreen 2016
Genuine Mazda Original Parts Windshield Sunscreen
|,|||-||MAZDA-MIATA-OIL-COOLER---FILTER-RELOCATION-KIT-1990-2005|,|19MAMIENPEVI|,|Mazda Miata Oil Cooler & Filter Relocation Kit 1990-2005|,|CBT-902-120|,|399.99|,|387.99|,||,||,||,||,||,||,|Mazda Miata Oil Cooler & Filter Relocation Kit 1990-2005
Change your oil in minutes and get better performance and reliability with the Cobalt oil cooler and filter relocation kit.
While most people consider this oil cooler kit an added insurance policy for their car, it actually can help improve performance. By increasing oil capacity and cooling the oil that flows through your engine, your car will run cooler and last longer.
The kit includes a remote oil filter mount for easier access. Allows you to change your oil in minutes.
For those of you who drive in cold weather, add the shroud that snaps on over the oil cooler to maintain minimum required oil temperatures.
Competition proven by SCCA, NASA, and Miata Club racers. Usable for street or racing.
|,|"Need Oil Cooler Shroud?" "Select Here" "No Thanks" "Yes, I need the Oil Cooler Shroud add(+$21.99)"|-||-|"Need Spacers Kit (for ABS Cars)?" "Select Here" "No Thanks" "Yes, I need the Spacers Kit (for ABS Cars) add(+$19.95)"|-||-|||-||MAMIORFLMOHA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata ORACLE Flush Mount Halo Kit 1990-1997 |,|ORC-FMHALO|,|219.00|,|189.00|,||,||,|0.000 |,||,||,||,|Mazda Miata ORACLE Flush Mount Halo Kit
ORACLE Halos are the best Demon Eye Kits produced for any vehicle thus far! This kit utilizes Cold Cathode technology which, unlike the other LED and Fiber Optic Kits, can be seen vividly... even in Direct Sunlight! These rings are rated at 50,000 hours of continuous use, that's more than twice the lifespan of the competition... these halos should outlive your car! Do not mistake this product for some "Do it yourself" LED knock off Demon Eye Kit, this is a High Quality Product produced by the new leaders of the industry!
What kind of "look" can I expect?
These Demon Eyes use CCFL (cold cathode fluorescent lighting) core technology. CCFL produces a very bright light from the gas charged tubes. The look is very "high tech" and matches HID equipped
lights exceedingly well. Additionally, this technology provides for very bright output from the halo rings so they're visible day or night.
What does the kit include?
Kit includes the following:
- (4) CCFL Halo Rings
- (2) Demon Eye Ballasts
- Miata Specific Wiring
- Installation Instructions
- Install DIY Video
****Only works with ORACLE FLUSH MOUNT KIT****
|,|||-||MAMIORHAKIT2|,|NBBODYSTYLING|,|Mazda Miata ORACLE Halo Kit 2001-2005 (Pair)|,|ACC-OHK|,|299.99|,|189.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ORACLE Halo Kit 2001-2005
ORACLE Halo Kits are the single most "head-turning" modification you can do for such a small investment. Each ORACLE Halo utilizes the latest lighting technology and the highest quality materials available on the market.
Whether CCFL, SMD, or Plasma, each halo can be seen vividly even in Direct Sunlight! Regardless of what you drive we have a Halo solution for you.
Kit includes the following:
- (2) ORACLE Halos of Your Choice
- (2) ORACLE Ballasts(CCFL) or ORACLE Drivers(SMD/PLASMA/ColorSHIFT)
- Vehicle Specific Wiring
- Installation Instructions
|,|"Select Color" "Select Here" "White" "Blue add($10)" "Red add($10)" "Green add($10)" "Amber add($10)" "Yellow add($10)" "UV/Purple add($15)"|-||-|||-||ORACLE-SEALED-BEAM-HALO-|,|NEW|,|MAZDA MIATA ORACLE PRE-INSTALLED 7" SEALED BEAM HALO 1990-1997|,|ORACLE-6905-001-333|,|169.99|,|126.95|,||,||,||,||,||,||,|MAZDA MIATA ORACLE PRE-INSTALLED 7" SEALED BEAM HALO 1990-1997
The ORACLE 7" Sealed Beam Unit comes with a pre-installed ORACLE LED Halo. Available in a variety of colors to fit you project needs. The headlight requires an H4 Bulb (not included).
Includes Pre-Installed ORACLE SMD Halo:
- Quality Glass Lens Sealed Beam Complete Headlight
- Composite Reflector Housing
- Accepts H4 Bulb (Sold Separately)
- 1 Year Full Replacement Warranty
- Fits Classic Cars, Trucks And Motorcycles
- Amber Halos Can Be Used As Turn Signals
- Blue, Green, Red, UV/Purple Intended For Show Only
- Easy Installation, Wire Directly To 12V Source
*ColorSHIFT option requires the use of a ColorSHIFT controller to properly operate (not included). Watch our informational video below on the different controller models.
Box Contents: 1 x ORACLE 7" Sealed Beam with ORACLE SMD Halo
|,|"Select Color" "Select Here:" "White" "Blue add(+$11)" "Red add(+$11)" "Green add(+$11)" "Amber add(+$11)" "UV/Purple add(+$17)" "ColorSHIFT add(+$59)"|-||-|||-||PATRCO90|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata Package Tray Cover 1990-2005|,|MC-PTC|,|500.00|,|425.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Package Tray Cover 1990-2005
Finally, a high quality cover for the upper package shelf. Build from aluminum, this laser cut package shelf cover covers all of the holes to the trunk required by the GCR, and makes the interior fit and finish on your SpecMiata look spectacular. The package shelf cover consists of 9 pieces.
|,|||-||N0Z7-33-98Z|,|19MAMIBRRORO1|,|Mazda Miata Passenger Side Front Caliper with Sport Suspension 1999-2005|,|N0Z7-33-98Z|,|280.49|,|158.02|,||,||,||,||,||,||,|Mazda Miata Passenger Side Front Caliper with Sport Suspension 1999-2005
|,|||-||MAZDA-MIATA-PERFECT-STOP-BRAKE-PADS-FRONT-SET|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata Perfect Stop Brake Pads - Front Set 1990-1993|,|PS525M|,|69.14|,|59.95|,||,||,||,||,||,||,|Mazda Miata Perfect Stop Brake Pads - Front Set 1990-1993
Perfect Stop™ Brakes Pads
Perfect Stop™ comprehensive friction solution with Exact Spec™ multilayer shim and hardware for 99% of vehicles in operation restores every vehicle to its optimal braking performance and ensures the quietest braking operation.
Perfect Stop™ is proudly manufactured by Robert Bosch who is recognized globally as the #1 automotive parts manufacturer in the world, so you know PerfectStop brake pads are the best brake pads in the aftermarket and at the most competitive price in the premium segment.
|,|||-||MAZDA-MIATA-PERFECT-STOP-BRAKE-PADS---REARSET|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata Perfect Stop Brake Pads - Rear Set 1990-1993|,|PS458C|,|59.71|,|49.95|,||,||,||,||,||,||,|Mazda Miata Perfect Stop Brake Pads - Rear Set 1990-1993
Perfect Stop™ Brakes Pads
Perfect Stop™ comprehensive friction solution with Exact Spec™ multilayer shim and hardware for 99% of vehicles in operation restores every vehicle to its optimal braking performance and ensures the quietest braking operation.
Perfect Stop™ is proudly manufactured by Robert Bosch who is recognized globally as the #1 automotive parts manufacturer in the world, so you know PerfectStop brake pads are the best brake pads in the aftermarket and at the most competitive price in the premium segment.
|,|||-||910-645|,|19MAMIEXHECO|,|Mazda Miata Performance Stainless Steel Header by Cobalt 1999-2005|,|910-645-MS|,|699.00|,|559.90|,||,||,||,||,||,||,|Mazda Miata Performance Stainless Steel Header by Cobalt 1999-2005
Power and beauty for your Miata! Our Performance Stainless Steel Header by Cobalt is the finest, more durable Stainless Steel Header available. The Cobalt header is custom made for the 99-05 Miata using the highest quality materials and workmanship.
Note: 99-00 California cars will require Item# 56003 or the check engine light will come on. Item# 56003 kit includes a weld in O2 bung which should be placed behind the rear cat.
Check out this set of features:
-Header is manufactured from 304 stainless steel
-Primary tubing diameter: 1-5/8"
-Secondary tubing diameter: 1-7/8"
-Collector diameter: 2-3/8"
-99-00 Miatas require EGR tube 903-131
-Fits both the stock mid-pipe or Cobalt 2.5" mid-pipes 909-960 & 909-962
-NOT CARB LEGAL
-5 Year Warranty
|,|"Shipping Cost" "add(+$85)"|-||-|||-||MAZDA-MIATA-PLANTED-DRIVER-SEAT-BRACKET-1999-2005|,|STATUS-RACING-SEAT-2|,|Mazda Miata Planted Driver Seat Bracket 1999-2005|,|SB255DR|,|185.00|,|159.00|,||,||,||,||,||,||,|Mazda Miata Planted Driver Seat Bracket 1999-2005
The Planted seat brackets are made with 3/16" thick steel for superior strength. Extra material is provided for direct seat or side mount applications where eliminating sliders is preferred.
Finished with a black powder coat, many applications are available for most cars. If you dont see your car listed in the applications section please contact Status Racing.
3/16" Steel, Black powder coating
Fits Planted Ring and Ring GT seats only
Extra material provided to eliminate seat slider
Seat Sliders NOT included
Works with Planted Sliders and Side Mounts only
|,|"Shipping and handing" "add(+$25)"|-||-|||-||MAZDA-MIATA-PLANTED-PASSENGER-SEAT-BRACKET-1999-2005|,|STATUS-RACING-SEAT-2|,|Mazda Miata Planted Passenger Seat Bracket 1999-2005|,|SB255PA|,|185.00|,|159.00|,||,||,||,||,||,||,|Mazda Miata Planted Passenger Seat Bracket 1999-2005
The Planted seat brackets are made with 3/16" thick steel for superior strength. Extra material is provided for direct seat or side mount applications where eliminating sliders is preferred.
Finished with a black powder coat, many applications are available for most cars. If you dont see your car listed in the applications section please contact Status Racing.
3/16" Steel, Black powder coating
Fits Planted Ring and Ring GT seats only
Extra material provided to eliminate seat slider
Seat Sliders NOT included
Works with Planted Sliders and Side Mounts only
|,|"Shipping and handing" "add(+$25)"|-||-|||-||CRAVEN-SPEED-PLATYPUS-PLATE-NC|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Platypus PRO-SERIES License Plate Mount 2009-2023|,|CS-CRHA-1072|,|129.00|,|99.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Platypus Tow Hook Front License Plate Mount 2009-2023
*Mount your license plate without drilling your bumper
*Specifically designed to fit the Mazda Miata (NC) 2006+
*Made from sturdy, lightweight aircraft aluminum
*Powder coat and anodized finished parts
*Avoid "Fix it" tickets in states that require a front plate
|,|"Select Year" "Select Here" "2009 - 2015" "2016 - 2023"|-||-|||-||DELRIN-REAR-DIFFERENTIAL-BUSHING|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Polyurethane Bushings by Prothane - Differential Mount 1990-1997|,|MS-908-105|,|99.90|,|74.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Polyurethane Bushings by Prothane - Differential Mount 1990-1997
With age OEM rubber bushings break down which makes your suspension feel sloppy. Prothane's polyurethane bushings are different than rubber and offer the most precise and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane bushings in your Miata will make a noticeable difference in it's handling for the better. Prothane supplies grease for installation and a lifetime guarantee.
Moss offeres Several options: Full kit, For all 1990-2005 Mazda Miata, except the sway bar bushings are for the 1990-97 end links (not later 1999-05). Front sway bar bushings fit a 19mm front bar (not the 20mm R package bar). Rear sway bar bushings fit the 12mm rear bar (94-97 have 11mm rear sway bar, included 12.4mm bushings work but not as tight). Diff mounts for 90-97 only.
|,|||-||908-100|,|19MAMISUANDS11|,|Mazda Miata Polyurethane Bushings by Prothane - Front Control Arm Kit 1990-2005|,|MS-908-100|,|145.95|,|84.99|,||,||,||,||,||,||,|Mazda Miata Polyurethane Bushings by Prothane - Front Control Arm Kit 1990-2005
With age OEM rubber bushings break down which makes your suspension feel sloppy. Prothane's polyurethane bushings are different than rubber and offer the most precise and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane bushings in your Miata will make a noticeable difference in it's handling for the better. Prothane supplies grease for installation and a lifetime guarantee.
Full kit: For all 1990-2005 Mazda Miata, except the sway bar bushings are for the 1990-97 end links (not later 1999-05). The front sway bar bushings fit a 19mm front bar (not the 20mm R package bar). The rear sway bar bushings fit the 12mm rear bar (94-97 have 11mm rear sway bar, included 12.4mm bushings work but not as tight). Diff mounts 90-97 only.
|,|||-||908-111|,|19MAMISUANDS5|,|Mazda Miata Polyurethane Bushings by Prothane - Front Sway Bar Kit 1990-1997|,|MS-908-111|,|45.95|,|25.99|,||,||,||,||,||,||,|Mazda Miata Polyurethane Bushings by Prothane - Front Sway Bar Kit 1990-1997
With age OEM rubber bushings break down which makes your suspension feel sloppy. Prothane's polyurethane bushings are different than rubber and offer the most precise and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane bushings in your Miata will make a noticeable difference in it's handling for the better. Prothane supplies grease for installation and a lifetime guarantee.
Full kit: For all 1990-2005 Mazda Miata, except the sway bar bushings are for the 1990-97 end links (not later 1999-05). The front sway bar bushings fit a 19mm front bar (not the 20mm R package bar). The rear sway bar bushings fit the 12mm rear bar (94-97 have 11mm rear sway bar, included 12.4mm bushings work but not as tight). Diff mounts 90-97 only.
|,|||-||908-110|,|19MAMISUANDS5|,|Mazda Miata Polyurethane Bushings by Prothane - Rear Sway Bar Kit 1990-1997|,|MS-908-110|,|36.95|,|14.99|,||,||,||,||,||,||,|Mazda Miata Polyurethane Bushings by Prothane - Rear Sway Bar Kit 1990-1997
With age OEM rubber bushings break down which makes your suspension feel sloppy. Prothane's polyurethane bushings are different than rubber and offer the most precise and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane bushings in your Miata will make a noticeable difference in it's handling for the better. Prothane supplies grease for installation and a lifetime guarantee.
Full kit: For all 1990-2005 Mazda Miata, except the sway bar bushings are for the 1990-97 end links (not later 1999-05). The front sway bar bushings fit a 19mm front bar (not the 20mm R package bar). The rear sway bar bushings fit the 12mm rear bar (94-97 have 11mm rear sway bar, included 12.4mm bushings work but not as tight). Diff mounts 90-97 only.
|,|||-||908-120|,|19MAMISUANDS5|,|Mazda Miata Polyurethane Bushings by Prothane Complete Kit 1990-2005|,|908-120|,|499.05|,|399.95|,||,||,||,||,||,||,|Mazda Miata Polyurethane Bushings by Prothane Complete Kit 1990-2005
With age OEM rubber bushings break down which makes your suspension feel sloppy. Prothane's polyurethane bushings are different than rubber and offer the most precise and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane bushings in your Miata will make a noticeable difference in it's handling for the better. Prothane supplies grease for installation and a lifetime guarantee.
Full kit: For all 1990-2005 Mazda Miata, except the sway bar bushings are for the 1990-97 end links (not later 1999-05). The front sway bar bushings fit a 19mm front bar (not the 20mm R package bar). The rear sway bar bushings fit the 12mm rear bar (94-97 have 11mm rear sway bar, included 12.4mm bushings work but not as tight). Diff mounts 90-97 only.
|,|||-||908-115|,|19MAMISUANDS5|,|Mazda Miata Polyurethane Bushings by Prothane Rear Control Arm Kit 1990-2005|,|908-115|,|210.55|,|199.85|,||,||,||,||,||,||,|Mazda Miata Polyurethane Bushings by Prothane Rear Control Arm Kit 1990-2005
With age OEM rubber bushings break down which makes your suspension feel sloppy. Prothane's polyurethane bushings are different than rubber and offer the most precise and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane bushings in your Miata will make a noticeable difference in it's handling for the better. Prothane supplies grease for installation and a lifetime guarantee.
Full kit: For all 1990-2005 Mazda Miata, except the sway bar bushings are for the 1990-97 end links (not later 1999-05). The front sway bar bushings fit a 19mm front bar (not the 20mm R package bar). The rear sway bar bushings fit the 12mm rear bar (94-97 have 11mm rear sway bar, included 12.4mm bushings work but not as tight). Diff mounts 90-97 only.
|,|||-||56463|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Power Pulse Race Muffler 99-05 |,|56463|,|480.00|,|377.00|,||,||,||,||,||,||,|Mazda Miata Power Pulse Race Muffler 99-05
Racing Beat Race Muffler
1999-2005 Miata - Manual transmission only
Produced in Racing Beat's California manufacturing facility, the Miata Race Muffler features a lightweight 304-stainless steel muffler canister, inlet and outlet tubing, single-wall tip (with etched Racing Beat logo), attachment hangers, and connecting flange. The muffler canister utilized features a straight-through design for optimum exhaust gas flow and includes a combination of stainless steel and high-temperature ceramic wool packing material for sound absorption.
In keeping with the emphasis on the lightweight aspect, Racing Beat adopted a unique approach to the development of the extensive hanger assemblies that were required for this muffler; we used lighter 5/16” OD rod material for the lengthy hanger assemblies, and designed a unique ½” OD forged end hanger, which we then mated to the outlet end of each hanger assembly. The result was a muffler that weighs only 13.50 lb.
Racing Beat Final Notes
This is an aggressive lightweight Miata exhaust system developed exclusively for the weight conscious racer. This is not a "touring exhaust" and may not appeal to more conservative drivers and/or passengers. Suited perfectly for those that enjoy a more aggressive exhaust note, but without any harsh, raspy or obnoxious off-sounds to lessen your driving experience. We've tried it and liked it....we think you will too!
|,|"Shipping Cost" "add(+$89)"|-||-|||-||N002-32-600R-0G|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Power Steering Pump 1990-2005|,|N002-32-600R-0G|,|464.95|,|419.02|,||,||,||,||,||,||,|Mazda Miata Power Steering Pump 1990-2005
Used one, P/S Pump
|,|"Select Year" "Select Here" "1990-1997" "1999-2005|-||-|||-||MAMICUCACOSE|,||,|Mazda Miata Premium Custom Caramel Carpet "COMPLETE SET" 1990-1993 - FREE SHIPPING!!!|,|ACC-BB1|,|799.99|,|479.95|,||,||,|0.000 |,||,||,||,|
For Mazda Miata Years 1990-1993
With "Super Plush" Upgrade Option in "Caramel"
Premium "Mass Rubber Backing Upgrade!"
INCLUDES a Custom Fit Matching Carpet "Super Plush Floor Mats" (2 Piece)
Go Miata is proud to offer the highest quality custom fit Mazda Miata carpet available. Our replacement Mazda Miata carpet kits are made from OEM Quality materials and are custom made using the original Mazda Miata floor pan, providing the best quality and fit. For those items that are molded, the mildew resistant jute padding is heat bonded to the backside of the new carpet kit and a heel pad is welded to the correct location on the driver's side.
This set includes passenger areas, curtain, shelf, and donut.
• Made in USA, with Top Quality materials.
• Heat and pressure molded to the original floor pan, just like OEM Carpet
• Mildew resistant jute padding is heat bonded to the backside
• Heel pad is welded to the correct location
• Mazda Miata Carpet is Guaranteed against Defects
• Will fit the following years: 1990-1993
Mazda Miata carpet is manufactured with Mass Rubber Upgrade backing:
Mass Rubber Upgrade Backing: This is a dense rubber mat that is attached to the back of the carpet. Actually molded with the carpet. You can identify this on your existing carpet by inspecting for a 1/8" thick black rubber on the backside of your carpet. Many late model vehicles have this backing as standard equipment from factory. It is used to replace the old type sound barrier/heat insulation for sound deadening and heat shielding. This backing also provides a water proof barrier between carpet and the floor pan resulting in less rust out problems. This product will more than double the weight of the standard carpet with standard backing. Adding this backing to your carpet will make the carpet more like a shell, holding its shape better than the standard more flexible backing resulting in a better fit and look. Please note that carpets with mass backing will also include the standard felt padding. This backing can be added as an upgrade to most of our molded carpets.
|,|"Select Year" "1990-1993"|-||-|"Super Plush Upgrade Option" "Caramel"|-||-|"Mass Rubber Backing Upgrade Option" "Yes, Mass Rubber"|-||-|"Custom Fit Matching Carpet Floor Mats" "2 Piece Super Plush"|-||-|||-||900-665|,|NBINFL|,|Mazda Miata Premium Cut Pile Carpet Sets 1990-2005|,|900-665|,|425.99|,|355.95|,||,||,||,||,||,||,|Mazda Miata Premium Cut Pile Carpet Sets 1990-2005
If your carpet is looking like a weathered doormat, our Premium Cut Pile Carpet Kits will revitalize your interior. Our Miata cut pile carpet kit is precision machine cut from material that is made in the USA, by specialists in our Moss Upholstery shop in the USA! Our Upholstery shop has been making superb kits for our British restoration business for decades and these kits get the same know-how and finesse. The cut pile isn't an OEM style but we feel it is superior. The kit includes padding, as well as front and rear floors, tunnel and rear deck carpet pieces - and full instructions! There are also rubber wear mats in the driver's side footwell. Add a set of leather seat covers and make your interior new again.
|,|"Select Color" "Select Here:" "Black" "Red add(+$40)" "Honey Tan (Camel Tan) add(+$40)" "Grey add(+$40)" "Autumn Leaf add(+$40)" "Blue add(+$40)"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||CARBON-MAZDASPEED-STYLE-SIDE-SKIRT-NA|,|NAEXVIALL|,|Mazda Miata Pro Garage Side Skirts Splitters - 2 Piece 1990-1997|,|115452-114345|,|299.99|,|227.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Pro Garage Side Skirts Splitters - 2 Piece 1990-1997
* Fiberglass Spec:
-Signature black finish
-High quality weather resistant aluminum mesh grille (where applicable)
-Proprietary polymer blend for maximum flexibility
-Increased durability and longer service life
-Modified Aerodynamics
-Reduced damage rate up to 75%
-Limited warranty and satisfaction guarantee
* Carbon Fiber Spec:
-2x2 twill weave carbon fiber
-Premium gloss, UV protectant finish
-Modified Aerodynamics
-Track-proven strength and performance
-Up to 70% lighter than OEM factory parts
-Weather-resistant aluminum mesh grille (where applicable)
-1 year limited warranty
-Modified Aerodynamics
|,|"Material" "Select Here" "Fiberglass" "Carbon Fiber add(+$460)"|-||-|"Shipping & Handling Cost" "add(+$145)"|-||-|||-||-PRO-PLUS-SUSPENION-KIT-BY-EIBACH-1990-1993|,|19MAMISUANDS|,|Mazda Miata Pro-Plus Suspenion Kit by Eibach 1990-1993|,|pro-plus-suspenion-kit-by-eibach-1990-1993|,|879.99|,|699.98|,||,||,||,||,||,||,|Mazda Miata Pro-Plus Suspenion Kit by Eibach 1990-1993
You love driving your Miata through canyons, twisty mountain back roads, or autocross competitions - make it handle even better with the Pro-Plus Suspension Kit from Eibach! This kit is a combination of springs and roll bars that are matched and work with factory or aftermarket shocks. This kit lowers your Miata's center of gravity and reduces squat during acceleration, body roll in corners and excessive nose-dive under braking. You'll experience a more precise turn-in response, improved handling, and enhanced cornering grip. The progressive spring rates lower your Miata 1" for a better look, too.
Features:
Front & Rear Lowering 1.0"
Front Sway Bar: 24mm Solid, 2-Way Adj
Rear Sway Bar: 15mm Solid, 3-Way Adj
Springs & Bars Matched for Performance
Progressive Spring Rate for Excellent Ride Quality
Million-Mile Warranty
|,|||-||PRO-PLUS-SUSPENION-KIT-BY-EIBACH-1994-1997|,|19MAMISUANDS8|,|Mazda Miata Pro-Plus Suspenion Kit by Eibach 1999-2005|,|eib5535-880|,|980.00|,|875.99|,||,||,||,||,||,||,|Mazda Miata Pro-Plus Suspenion Kit by Eibach 1999-2005
The Eibach Pro-System-Plus is a perfect step on the way to total suspension dominance. Pro-Plus kits are designed by our team of suspension engineers and ride control experts to offer the best-possible street performance. The Pro-Plus Kit is a precisely balanced combination of sport springs, bump-stops (secondary springs) and anti-roll bars designed and tuned to operate as a performance suspension system.
Pro-Plus Kit improves turn-in response, increases cornering speed and reduces body roll. Pro-Plus Kit is the ultimate performance suspension system—a must for any true driving enthusiast.
*Also available as a Sport-Plus-Kit, which includes Sportline lowering––for the lowest possible drop and over the top handling.
Features
* Pro-Kit & Anti-Roll-Kit
* Super-Street Performance– With Total Control
* Precision Engineered Suspension System
* No Guesswork: Install, Set Alignment and Carve
* Maximum Performance–Maximum Comfort
* Million Mile Warranty
|,|||-||PRO-PLUS-SUSPENION-KIT-BY-EIBACH|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Pro-Plus Suspenion Kit by Eibach 2006-2015|,|910-253|,|749.99|,|698.98|,||,||,||,||,||,||,|Mazda Miata Pro-Plus Suspenion Kit by Eibach 2006-2015
You love driving your Miata through canyons, twisty mountain back roads, or autocross competitions - make it handle even better with the Pro-Plus Suspension Kit from Eibach! This kit is a combination of springs and roll bars that are matched and work with factory or aftermarket shocks. This kit lowers your Miata's center of gravity and reduces squat during acceleration, body roll in corners and excessive nose-dive under braking. You'll experience a more precise turn-in response, improved handling, and enhanced cornering grip. The progressive spring rates lower your Miata 1.5" front and 1.3" rear for a better look, too.
Features:
Lowering: 1.5" Front, 1.3" Rear
Front Sway Bar: 25mm Tubular, Non-Adj
Rear Sway Bar: 16mm Tubular, 2-Way Adj
Springs & Bars Matched for Performance
Progressive Spring Rate for Excellent Ride Quality
Million-Mile Warranty
|,|||-||TGF190|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Pro-Tech SPORT SPRINGS 2016-2021|,|prg40-1134|,|380.99|,|260.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Pro-Tech SPORT SPRINGS 2016-2021
Our engineering staff has decades of experience in the design and tuning of performance suspension systems, including CART/Indy Cars, IMSA, SCCA, NASA, and SCORE competitors. These spring designs reflect our ability to develop a successful blend of appearance, handling capability, and ride quality. These springs feature increased spring rates for upgraded handling capabilities as well as progressively wound springs for superior ride quality. These springs are designed to work with OEM shocks but will benefit from using high performance shocks such as Tokico or Bilstein. Progress specifies only certified high-tensile SAE spring wire materials. Our springs are cold-wound on modern CNC coiling machines, then stress relieved, pre-set, and shot-peened for maximum durability.
Front rate: 180 lbs/in --- Rear rate: 115 lbs/in
Front drop: 1.3" --- Rear drop: 1.3"
All spring kits are powdercoated metallic gray.
Drop amount varies by 0.25" depending on shocks used.
|,|||-||GARAGE-STAR-PULLEY-KIT|,|19MAMIENPECA1|,|Mazda Miata Pulley Kit 1990-2005|,|GS-PK-V2|,|165.00|,|154.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Pulley Kit 1990-2005
Alternator and Water Pump Pulley Set
Two Types Available:
Power Steering and Non-Power Steering
These pulleys are machined from solid billet aluminum.
Below are the three models that we carry and information on the pulleys
1990-1993 Miata info
Garage Star 1.6 alternator pulley 3.4 ounces
Stock 1.6 alternator pulley 7.5 ounces
Garage 1.6 Star water pump pulley 9.8 ounces
Stock 1.6 water pump pulley 11.0 ounces
55% 1.6 alternator weight difference from stock
32% 1.6 water pump weight difference from stock
1994-1997 Miata info
Garage Star 1.8NA alternator pulley 2.2 ounces
Stock 1.8NA alternator pulley 5.25 ounces
Garage 1.8NA Star water pump pulley 8.0 ounces
Stock 1.8NA water pump pulley 12.05 ounces
69% 1.8NA alternator weight difference from stock
11% 1.8NA water pump weight difference from stock
1999-2005 Miata info
Garage Star 1.8NB alternator pulley 1.9 ounces
Stock 1.8NB alternator pulley 5.25 ounces
Garage 1.8NB Star water pump pulley 8.0 ounces
Stock 1.8NB water pump pulley 12.05 ounces
64% 1.8NB alternator weight difference from stock
11% 1.8NB water pump weight difference from stock
|,|"Choose an option" "Select Here" "1990-1993 - 1.6 NA Miata Water Pump & Alternator Pulleys" "1994-1997 - 1.8 NA Miata Water Pump & Alternator Pulleys" "1999-2005 - 1.8 NB Miata Water Pump & Alternator Pulleys"|-||-|"Type of Steering" "Select Here" "Power Steering" "Non-Power Steering"|-||-|||-||RABEMAMIHEGA|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata Racing Beat Header Gasket 1994-1997|,|56308-BP05-13-460|,|25.95|,|19.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Racing Beat Header Gasket 1994-1997
|,|||-||RACBEATIN|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Mazda Miata Racing Beat Performance High Flow Air Intake Kit 1990-1993 1.6L - Sale! |,|56500|,|370.00|,|329.00|,||,||,|0.000 |,||,|agagag|,||,|Mazda Miata Racing Beat Performance High Flow Air Intake Kit 1990-1993 1.6L - Sale!
Racing Beat's 50-State legal intake provides a nice horsepower gain through a unique design that positions the intake away from the exhaust header to draw in more cool air.
The result is more power & torque and a great sound. Get this for your Miata and you won't be able to get the smile off your face!
The editors of Miata Magazine reviewed this intake and stated, "Around 3500 rpm a new pull develops that increases with the RPM. Around 5,000 the power gain is easily noticed over the factory system. The Racing Beat intake will look good under any hood with its curvy aluminum elbow, but under its good looks is a performer."
This intake was also reviewed by Sport Compact Car Magazine in the “The Great Intake Shootout” which read, "This intake was the puzzler of the test. Despite its higher intake temperatures, it remains the power king of the temperature-corrected dyno tests. Due to that fact, it's our favorite. Its hard to argue with the most power, the best sound and the best price in one intake. Plus it takes minutes to install and looks pretty cool.”
Racing Beat dyno tests have shown a 6 HP increase over the stock air filter assembly when tested on a stock '95 Miata upgraded with the Racing Beat High Flow Intake.
Cruise Control Note: The '94-'97 version comes with the hardware necessary to reposition the cruise control unit. This is an option on the 90-93 kits.
Not compatible with most aftermarket strut tower braces.
|,|||-||56468|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Racing Beat Power Pulse Miata Muffler - Auto Trans 99-03 |,|56468|,|495.00|,|414.00|,||,||,|11.000 |,||,||,||,|Mazda Miata Racing Beat Power Pulse Miata Muffler - Auto Trans 99-03
The heart of our Racing Beat Power Pulse muffler for the 1999-2003 Miata (auto transmission) is our polished 304-stainless steel canister. The inlet and outlet tubes also feature mandrel-bent 304-stainless steel for excellent durability and appearance. For maximum performance potential, our muffler features the same 2.375" OD Straight-Flow internal design configuration as our RX-7 Turbo II exhaust systems. Finished with a 3.5" OD polished 304-stainless steel tip, this large diameter muffler will handle applications from stock to race.
Designed entirely by Racing Beat, this muffler features stainless steel wool and ceramic sound-deadening packing insulation to provide the optimum exhaust note for your Miata. The Power Pulse Muffler offers a deep, throaty exhaust note without any harsh, buzzy or droning tones. All Racing Beat's exhaust are tuned in-house by our engineering staff to produce a modest exhaust tone at low speeds, and a bit more "attitude" under full throttle acceleration.
On an otherwise stock 1999 Miata (baseline hp - 110.6) our dyno tests have shown a 2.4 hp gain (max hp - 113.0) with the addition of this muffler. Combine this muffler with a Racing Beat air intake for gains of up to 8.5 hp! Don't be swayed by exaggerated performance claims made by other aftermarket suppliers - big HP gains from an aftermarket rear muffler simply don't exist. If they did, why would Mazda leave this untapped horsepower behind???
Each Power Pulse muffler is supplied with a replacement OEM donut style gasket. Installation can be completed using basic hand tools; simply unbolt the two retaining nuts, slip the original muffler off the rubber hanger grommets, and then reverse the process for installation of the new Power Pulse muffler. The Power Pulse muffler is 50-state emissions legal and meets all California sound level requirements.
Muffler Fitment on Auto Transmission Models
Due to ongoing discrepancies with regards to the mounting flange bolt-hole spacing on automatic transmission cars, we are suggesting that you measure the flange bolt-hole spacing prior to placing an order. (Why Mazda decided to use a different flange on the AT version has left us baffled! Sorry for the extra work required to determine the correct exhaust for your application, but we'd rather have you order the correct muffler and avoid the hassles and expense of returning the wrong part.) If you have any questions about these measurements, please give us a call for assistance.
We request that you measure the flange bolt-hole spacing on your car to confirm that you will be obtaining the correct muffler for your application. The measurement of concern is the spacing of the bolt holes on the flange between the muffler and the connecting pipe section.
Note your measurements as follows:
Automatic Transmission - 3.46" (88mm) center-to-center
Manual Transmission - 4.33" (110mm) center-to-center
If your measurements match the specifications for "Auto Transmission", then you have selected the correct product listing.
If your measurements match the specifications for "Manual Transmission", then you will order Power Pulse Exhaust Part No. 56461.
|,|"Shipping Cost" "add(+$98)"|-||-|||-||56453|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda Miata Racing Beat Power Pulse Race Muffler 90-97 |,|56453|,|420.00|,|359.00|,||,||,||,||,||,||,|Mazda Miata Racing Beat Power Pulse Race Muffler 90-97
Produced in Racing Beat's California manufacturing facility, the Miata Race Muffler features a light weight 304-stainless steel muffler canister, inlet and outlet tubing, single-wall tip (with etched Racing Beat logo), attachment hangers, and connecting flange. The muffler canister utilized features a straight-through design for optimum exhaust gas flow and includes a combination of stainless steel and high-temperature ceramic wool packing material for sound absorption. The result was a muffler section that weighs only 11.25 lb (connecting pipe weight not included).
Connecting Pipe (Required)
Each Power Pulse Muffler requires the use of a Racing Beat connecting pipe section. We offer two (2) versions of this pipe: the Power Pulse Connecting Pipe, or the Sport Connecting Pipe.
The Power Pulse Connecting Pipe (Select your model year: 1990-95 or 1996-97) incorporates a presilencer to moderate the sound level to deep, throaty tone. Both the muffler canister and the presilencer are manufactured using a stainless steel perforated tube core, wrapped with stainless steel wool, and packed to capacity with a high temperature ceramic wool. This design technique allows for a low restriction, straight through design, combined with superior sound dampening characteristics.
The Power Pulse Sport Connecting Pipe (Select your model year: 1990-95 or 1996-97) is produced without the presilencer section, and offers a louder, and more robust exhaust note. While not obnoxious or buzzy, this pipe will allow the exhaust note to rise more moderately under acceleration.
|,|"Shipping cost" "add(+$89)"|-||-|||-||RACING-BEAT-HEADER-O2|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Racing Beat Race Header O2 Sensor Kit 1999-2000|,|56003|,|165.00|,|115.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Racing Beat Race Header O2 Sensor Kit 1999-2000
This Racing Beat Race Header Kit is intended for the installation of a 1999-2000 Miata Racing Beat header into a California Emissions Equipped Model (CEEM). Several states now sell California emissions equipped models, to determine if your car is equipped with California emission control devices, refer to the emissions decal on the underside of the hood.
Installation of a header on a CEEM requires the removal of the primary catalytic converter. Once a header is installed on a CEEM, the vehicle is no longer considered emissions legal and cannot legally be used upon a public highway. If the header is to be used on for a race application, this Race Header Kit can be used to retain the use of emissions control system. The objective of this kit is to relocate the secondary oxygen sensor to a new position in the exhaust system directly behind the remaining catalytic converter. In order to accomplish this task, the factory connecting pipe must be removed from the vehicle and an oxygen sensor nut position must be drilled and a retaining fitting welded in place.
This kit includes two (2) wiring harness extensions that are equipped with factory OEM style connector plugs, which eliminate the need to "cut and splice" the factory wiring harness. High temperature-coated 18-gauge wire is utilized to provide superior heat protection. Also supplied is an oxygen sensor mounting fitting and detailed instructions. PLEASE NOTE: it is possible that the wire harness extensions may be delivered with white external insulation rather than black external insulation depending on availability of bulk wire from our suppliers. The black insulation displayed in the photos is for illustration purposes only.
* Legal in California only for racing vehicles, which may never be used upon a highway.
|,|||-||902-497|,|NAEXVIALL|,|Mazda Miata Radiator Cowl Covers 1990-2005|,|902-497|,|79.95|,|55.99|,||,||,||,||,||,||,|Mazda Miata Radiator Cowl Covers 1990-2005
Precision cut from polished stainless steel, this radiator cowl cover really dresses up your engine bay. It also closes off an area where some air can escape over the top of your radiator, instead of going straight through. Adds a bit of cooling efficiency and a great look!
|,|"Select Year" "Select Here" "1990-1997" "1999-2005"|-||-|||-||RADIO-CONSOLE-NA-94-97|,|INSETE|,|Mazda Miata Radio Console NA 94-97|,|CMC-RC1-NA|,|349.00|,|295.00|,||,||,|0.000 |,||,||,||,|Radio Console NA 94-97
This carbon fiber radio console replaces the center radio console on LHD Miata NA8 MX-5 1994-1997. The back has all the holes and plastic bits to fit perfectly. Gives a racing style to your interior.
Specifications:
- 3K Carbon Fiber 1x1 twill (Made in Japan)
- 240g+450g Carbon Fiber manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in Carbon Fiber (CF).
|,|"Material" "Carbon Fiber"|-||-|"EMS Shipping Cost" "add (+$79)"|-||-|||-||DDM-05-003-SS|,|MAZDA-MX-5-MIATA-AUDIO-VIDEO-PARTS-1990-1997|,|MAZDA MIATA RADIO SURROUNDS BY DDMWORKS 1990-1997|,|DDM-05-003-ss|,|149.99|,|109.00|,||,||,||,||,||,||,|MAZDA MIATA RADIO SURROUNDS BY DDMWORKS 1990-1997
This radio surround fits in the non-standard radio hole in the 1990-1995 Miata's. Made of 304 stainless steel it is as strong as it is beautiful. Holes fit most standard 2 " gauges and a spot to securely hold your radio in place. Add a little style and function to your Miata! Fits all 90-95 Miatas and 96-97 Miata's with the factory upgraded radio.
Fits: non-standard radio hole in the 1990-1995 Miata's
DDM-05-003-SS
DDM-06-008-SS
DDM-07-003-SS
DDM-05-003-BLK
DDM-06-008-BLK
DDM-07-003-BLK
|,|"Select Gauge" "Select Here" "2 Gauge" "3 Gauge Upside Down" "Blank (No Gauge)"|-||-|"Select Finish" "Select Here" "Black Matte"|-||-|||-||RAINRAIL|,|SOFT-TOP|,|Mazda Miata Rain Rail 1990-2005- SALE!!!|,|240-245|,|194.00|,|136.49|,||,||,|0.000 |,||,|sdfgdsfg|,||,|Mazda Miata Rain Rail 1990-2005 - SALE!!!
This is the plastic "rain gutter" type piece that every Miata already has. It is located behind the top (you can't see it until you remove the top) and funnels the water that runs down between the top and the body of the car to drainage holes. If this piece is cracked or brittle, serious water damage can occur in your Miata.
|,|||-||MAMIRARZPEPU|,|19MAMIENPECA|,|Mazda Miata Ralco RZ Performance Pulley 1994-1997|,|RRZ-0914992|,|199.99|,|149.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Ralco RZ Performance Pulley 1994-1997
Ralco RZ Pulleys are designed with a unique blend of performance and reliability. These pulleys are made from the highest quality 6061 Aluminum billet. Ralco RZ pulley conversions are proven to produce maximum power gains with the performance benefits of weight reduction, that you wouldn’t receive from factory parts. Throttle response, horsepower and torque are all increased with this great product.
Pulley Set Includes Crank & Alt.
Pulleys (Polished Color)
|,|||-||MAMIRARZPESH|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata Ralco RZ Performance Short Throw Shifter 1990-1997|,|RRZ-0914834|,|109.99|,|79.95|,||,||,|0.000 |,||,||,||,|
Mazda Miata Ralco RZ Performance Short Throw Shifter 1990-1997
There so many short throw shifters on the market, however, only Ralcorz has a shifter available that stands out amongst all others. These shifters are made from the highest quality aluminum and hardened steel. Every Ralcorz Short Shift kit is precision-made for each application.
A premium sport shifter engineered for the enthusiast. This Sport Shifter has all of the features you need.
Key Features:
* Accepts stock knob
* Direct bolt on installation
* Up to 40% throw reduced for quicker shifts
|,|||-||RALLYBACKER-FRONT-DIFFUSERS|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Rallybacker Front Diffusers 2016+|,|rallybacker-front-diffusers|,|515.05|,|449.95|,||,||,||,||,||,||,|Mazda Miata Rallybacker Front Diffusers 2016+
Product Description:
Front diffusers with end lip made by Rallybacker for the 2016+ ND MX-5 Miata. It follows the shape of the car nicely and replace the factory front diffusers with some wider ones that also have an end lip to make the car look wider and bolder.
-Made of FRP
-Easy bolt on installation
-Wide and low look without a large lip
-Perfect fitment
-Only available for the ND (2016+) Miata
|,|"Shipping & handling" "add(+$105)"|-||-|||-||MAZDA-MIATA-REAR-BRACE-TAB-KIT-1990-1993|,|19MAMISUANDS5|,|Mazda Miata Rear Brace Tab Kit - 1990-1993|,|AWR-5999|,|135.00|,|109.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Rear Brace Tab Kit - 1990-1993
Product Description
Fits 1990-1993 Miata. These brace tabs, once welded to the rear subframe, will allow the factory subframe to floor brace from 1994 and later Miatas to be installed on the 1990-1993 Miatas.
The earlier cars did not have a mounting point for the braces. Welding these pieces to the subframe and the floor provides the mounting points.
Legal for Spec Miata. Can also be used on any 1990-1993 Miata for street use or any race class that allows it.
Also order part number NA75-56-3AY from Mazda, which is the Brace Kit. Description on the brace kit is incorrect and shows 'L' Floor Reinf. This kit is actually all three tubular bars that make up a "U" shaped brace. In addition, 6 bolts will bee needed. You can source these yourself, or order the Mazda part number 9979-61-225 (QTY 6)
Weight: 4.00 Lbs
NOTE: For use on early Miata's with out mounting points
|,|||-||11-3106|,|19MAMISUANDS5|,|Mazda Miata Rear Control Arm Bushing Kit 1990-2005|,|11-3106R-G|,|295.05|,|194.95|,||,||,||,||,||,||,|Mazda Miata Rear Control Arm Bushing Kit 1990-2005
Do you feel like your Miata isn't taking corners as well as it used too? Maybe you've heard some clunking or you've been having problems with your Miata's alignment? All of these and more could be symptoms of a failed OE control arm bushing. The OE rear control arm bushings installed on your Miata are made of soft rubber so that they absorb most of the vibrations you pick up from the road. The drawback to this softness is that the bushings are prone to stretching, cracking, and eventually rotting away. Luckily for you, DST has what you need!
Say hello to Energy Suspension's 11.3106, a HyperFlex polyurethane set of rear control arm bushings designed specifically for the Mazda Miata 1990-2005. Offering increased responsiveness and a better feel for the road the 11.3106 not only gets rid of your clunking and loose steering but it's also designed to hold up under stress for much longer than the OE. Since the 11.3106 is crafted using Energy Suspension's Hyperflex polyurethane your NVH might increase slightly, but the dramatic increase of durability and longevity are well worth it. In fact, if you plan on racing the NVH can even be helpful, giving you an even clearer feel for what your roadster can handle.
The 11.3106 was also designed with ease of installation in mind. Energy Suspension eliminated the need for a press by forming these bushings as two half-bushings with a metal sleeve. Just insert each half bushing on each side of the control arm, then slip the sleeve through and, using your OE bolts, finish the install. Energy Suspension designed the sleeves to match your OE bolt size, allowing you to re-use the bolts to save you even more money! If you also need to replace your front control arm bushings check out Energy Suspension's 11.3105! Both the 11.3105 and >11.3106 kits are stocked regularly in our Stephenville warehouse, ready to ship the day you order them!
|,|"Select Color" "Select Here" "RED" "BLACK add(+$10)"|-||-|||-||STILLEN-MAZDA-MIATA-REAR-CROSS-DRILLED-1-PIECE-SPORT-ROTORS-1994-2005|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata Rear Cross Drilled 1-Piece Sport Rotors 1994-2005|,|MAZ2101|,|147.42|,|132.68|,||,||,||,||,||,||,|Mazda Miata Rear Cross Drilled 1-Piece Sport Rotors 1994-2005
One-piece Sport Rotors are a great choice for performance, durability and style when staying with OE factory calipers. These high-performance upgrades directly replace those plain OE factory rotors with no modification required. Applications for cars are finished with a tough clear zinc plating for exceptional corrosion resistance and to avoid the pad contamination and environmental issues with cadmium plating. Most truck and SUV applications have a tough, black e-coat to keep the elements at bay.
|,|"Application" "Mazda Miata 1994-2005"|-||-|"Special Handling fee" "add(+$10)"|-||-|||-||MAZDA-MIATA-FIBERGLASS-REAR-DIFFUSER-1999-2005|,|20MAMIEXBOST|,|Mazda Miata Rear Diffuser 1999-2014|,|50-66-1040|,|349.99|,|295.00|,||,||,||,||,||,||,|Mazda Miata Fiberglass Rear Diffuser 2006-2014
Improve your Miata's aerodynamics along with its looks! This lightweight diffuser attaches easily and gives your 2006-2014 Miata that racing look even if you don't hit the track.
This fiberglass version comes finished in black gel coat. Also available in real carbon fiber.
Picture shown in Carbon Fiber
|,|"Select Year" "Select Here" "1999-2005 Fiberglass" "2006-2014 Fiberglass" "2006-2014 Carbon Fiber add(+$159)"|-||-|"Shipping Cost" "add(+$145)"|-||-|||-||905-377-8|,|NAEXBOST|,|Mazda Miata Rear Fender 1990-1997|,|905-377-8|,|139.95|,|119.98|,||,||,||,||,||,||,|Mazda Miata Rear Fender 1990-1997
These are aftermarket, weld-in, replacement body panels.
|,|"Select Side" "Select Here:" "Passenger Side" "Driver Side"|-||-|"Shipping & Handling" "add(+$109)"|-||-|||-||MAG-REAR-CAT-COVERTER-NB-CA|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Rear High Flow Catalytic Converter by MagnaFlow 1999-2000 CALIFORNIA|,|MAG-441771|,|885.00|,|740.00|,||,||,|0.000 |,||,||,||,|Mazda Miata High Flow Catalytic Converter by MagnaFlow 1999-2000 CALIFORNIA
*California CARB approved.
**Not direct bolt-in, one end requires welding.
MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding, cutting or bending, limited applications may require additional welding for optimal installation.
|,|||-||MAZDA-MIATA-REAR-SHOCK-TOWER-BRACE-1990-2005|,|19MAMISUANDS8|,|Mazda Miata Rear Shock Tower Brace 1990-2005|,|909-860|,|139.99|,|119.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Rear Shock Tower Brace 1990-2005
Engineered to work with and match Cobalt's 3-Point Front Shock Brace, this Cobalt Rear Brace is strong and beautiful. Using strong oval section stainless steel tubing this bar ties the tops of the shock towers together for better chassis rigidity. The welds are artfully done and the Cobalt logo is prominent yet understated. This design goes up then over to the shock towers instead of other designs that come forward into the truck space, keeping all of your trunk storage open and available. Comes complete with instructions and all necessary hardware.
|,|||-||DGM-TRUNK-SPOILER-NC|,|20MIMIEXPA|,|Mazda Miata Rear Trunk Spoiler 2006-2015|,|Wing-Deck|,|349.00|,|229.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Rear Trunk Spoiler 2006-2015
Material - ABS
Attachment Type - Screw-On
|,|||-||GENUINE-MAZDA-REBUILT-WATERPUMP-KIT-MIATA-90-93|,|19MAMIMAVEAL|,|Mazda Miata Rebuilt Waterpump Kit 1990-1993|,|B66015010E-15116-15165-15287|,|246.70|,|172.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Rebuilt Waterpump Kit 1990-1993
Mazda Miata water pump.
Is your Mazda Miata have a leaking water pump? This kit is all you need to replace it.
Also needs to be replaced when you replace the timing belt (while you're there...).
Does not include Gaskets or O Ring for Water Pump.
|,|"Select Year" "Select Here" "1990" "1991" "1992" "1993"|-||-|"Do You Need Two Gaskets and a O Ring for your Water Pump" "No" "Yes, add(+$23)"|-||-|||-||MASPKEYFOB|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Red Valet Key Fob Authentic Logo Key Chain Key Ring Keytag Lanyard|,|KC3718-MIA-RED|,|19.99|,|16.95|,||,||,|0.000 |,||,||,||,|Mazda Burgundy Spinner Key Chain Car Gift Fob
KEY CHAINS: Striking in appearance and crafted from superior materials, these key chains are unique, durable and backed by a lifetime warranty against flaws in materials & workmanship. Packaged in an attractive gift box.
|,|||-||MAZDA-MIATA-REINFORCED-SWAY-BAR-BRACKETS-1990-2005|,|19MAMISUANDS6|,|Mazda Miata Reinforced Sway Bar Brackets 1990-2005|,|AWR-5102|,|209.99|,|189.05|,||,||,|0.000 |,||,||,||,|Mazda Miata Reinforced Sway Bar Brackets 1990-2005
Product Description
*LIFETIME WARRANTY*
Now the redesigned sway bar bracket for the 1st gen Miata is now the same part for 2nd gen Miata's. A slight revision in the bolting dimensions allows for the use of more aftermarket sway bar clamps.
This also fits cars with and without power steering. Open ended reinforced sway bar brackets allow the option of putting power steering hoses through the bracket.
In racing and autocross use, especially when using larger sway bars and driving aggressively, the stock sway bar brackets can flex to the point of breaking. These reinforced brackets replace the stock ones to eliminate this problem.
Laser cut and folded and tig welded steel units that are then powder coated black. These revised units will accept OEM sway bar clamps, Racing Beat aluminum sway bar clamps or Energy suspension sway bar kits!
NOTE * Spot welds attaching the stock mounts to frame must be drilled out.
Weight: 10.00 LBS
Customer Feedback
I installed the brackets on Sunday and got the car running on Monday and I cannot thank you enough for designing such a great product like this, It seriously, gave the lost driving characteristics back, no more unexpected oversteer, no more floating sway bar, no more mysterious clunks going over speed bumps thank you, and I will highly recommend these brackets to all the fellow miata drivers that don't know about these yet or are contemplating buying and installing them. Definitely going on my next miata regardless if the stock brackets are good still.
|,|||-||GENUINE-MAZDA-MIATA-OEM-MAZDA-MIATA-FACTORY-REMANUFACTURED-ALTERNATOR-1990-1991-1992-1993-AUTOMATIC-|,|MAPA19|,|Mazda Miata Reman Alternator 1990-1993 |,|OEM-B64J-18-300R-00|,|315.56|,|198.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Reman Alternator 1990-1993
Alternator Fits: 1990-1993 Miata w/Automatic Transmission and Manual Transmission
These Alternator replacement of OEM SKU below
B61P-18-300R-00 - Manual Transmission
B64J-18-300R-00 - Automatic Transmission
|,|"Select Transmission" "Select Here" "Manual Transmission" "Automatic Transmission"|-||-|||-||MAZDA-MIATA-REMOTE-OIL-FILTER-KIT-1990-2005|,|19MAMIENPEVI|,|Mazda Miata Remote Oil Filter Kit 1990-2005|,|CBT-902-115|,|239.99|,|199.98|,||,||,||,||,||,||,|Mazda Miata Remote Oil Filter Kit 1990-2005
This Mazda Miata Remote Oil Filter Kit makes oil changes a snap. The factory oil filter is buried under the intake manifold, making it difficult to reach.
The remote mount relocates the filter to the firewall area. Allows you to change your oil in minutes.
|,|"Need Spacers Kit (for ABS Cars)?" "Select Here" "No Thanks" "Yes, I need the Spacers Kit (for ABS Cars) add(+$17.99)"|-||-|||-||902-141|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Mazda Miata Remote Oil Filter Relocation Spacers Kit 1990-2005 with ABS|,|902-141|,|19.45|,|17.99|,||,||,||,||,||,||,|Mazda Miata Remote Oil Filter Relocation Spacers Kit 1990-2005 with ABS
These clever spacers allow you to install a Oil Filter Relocation Kit or Oil Cooler Kit on your Miata equipped with Anti Lock Brakes.
|,|||-||GORELURA|,|NBBODYSTYLING|,|Mazda Miata Removable Luggage Rack 1990-2005 - Sale!|,|505-101|,|399.99|,|249.05|,||,||,|5.000 |,|Usually ships the same business day|,|fasdfd|,||,|Mazda Miata Removable Luggage Rack 1990-2005 - Sale!
We all know its difficult to find enough space in your Miata's trunk for all that luggage. Well now, with Go Miata's Removable Luggage Rack, you can take it all with you - with style!
-Create more space for luggage, golf clubs, and hauling other items
-Fully removable!
-Made from heavy duty stainless steel
-Electro-polished finish for an everlasting shine
-Fully assembled
-Install Kit Included!
-Padded feet completely protect the trunk of the vehicle
-Weight capacity of 40lbs
-All 5 Brackets that attach to the trunk also have soft plastic coating on the inside to protect your paint surface.
Approx: 32.5" x 20.5" and hovers about 2" off the trunk lid
|,|"Shipping & Handling fee" "add(+$85)"|-||-|||-||GOMIRELURA20|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Removable Luggage Rack 2006-2016|,|505-102|,|393.59|,|249.05|,||,||,|5.000 |,||,||,||,|Mazda Miata Removable Luggage Rack 2006-2015
We all know its difficult to find enough space in your Miata's trunk for all that luggage. Well now, with Go Miata's Removable Luggage Rack, you can take it all with you - with style!
-Create more space for luggage, golf clubs, and hauling other items
-Fully removable!
-Made from heavy duty stainless steel
-Electro-polished finish for an everlasting shine
-Fully assembled
-Install Kit Included!
-Padded feet completely protect the trunk of the vehicle
-Weight capacity of 40lbs
-All 5 Brackets that attach to the trunk also have soft plastic coating on the inside to protect your paint surface.
Approx: 32.5" x 20.5" and hovers about 2" off the trunk lid
|,|"Select Year" "Select Here" "2006-2015 (DR1007)" "2016+ (DR1009)"|-||-|"Shipping Cost" "add(+$85)"|-||-|||-||910-995|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Removable Luggage Rack for Soft Top 2016-2020 |,|910-995|,|289.95|,|249.98|,||,||,||,||,||,||,|Mazda Miata Removable Luggage Rack for Soft Top 2016-2020
Add some functionality to your ND for those overnight trips with our removable luggage rack. Classic in appearance, it has many modern features, most notably the electro-polished stainless steel construction that will never rust. Installs in minutes with no permanent modification required and comes completely assembled (50 lbs. max. weight).
Available in brushed or black option for your Mazda Miata ND.
|,|"Select Finish" "Select Here" "Brushed" "Black"|-||-|||-||902-650|,|19MAMIEXVEAL1|,|Mazda Miata Replacement Oxygen (O2) Sensor 1990-1993|,|MS-902-650|,|69.99|,|58.98|,||,||,||,||,||,||,|Mazda Miata Replacement Oxygen (O2) Sensor 1990-1993
A faulty O2 sensor can rob your car of performance, or worse yet, fail an emissions test. Replace it now with a high quality replacement O2 sensor. Sensors use crimp connectors to attach to factory wires.
|,|||-||902-651|,|19MAMIEXVEAL1|,|Mazda Miata Replacement Oxygen (O2) Sensor 1994-2005|,|902-651|,|79.99|,|64.98|,||,||,||,||,||,||,|Mazda Miata Replacement Oxygen (O2) Sensor 1994-2005
A faulty O2 sensor can rob your car of performance, or worse yet, fail an emissions test. Replace it now with a high quality replacement O2 sensor. Sensors use crimp connectors to attach to factory wires.
|,|||-||MAZDA-MIATA-REPLACEMENT-WINDOW-BUSHING-GUIDE-KIT-1990-2005-TWO-SIDES|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Replacement Window Bushing Guide Kit 1990 - 2005 Two sides|,|NAB-7134|,|36.95|,|27.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Replacement Window Bushing Guide Kit 1990 - 2005 Two sides
These Window Bushings are made from specially formulated Delrin POM to withstand the elements and sustain use inside the doors for years to come.
The guide bushings fits all NA (1990-1997) and NB (1999-2005) Mazda Miata's.
|,|||-||RK-DESIGN-REAR-SPOILER|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata RK Design Rear Spoiler 2016+|,|rk-design-rear-spoiler|,|315.80|,|242.99|,||,||,||,||,||,||,|Mazda Miata RK Design Rear Spoiler 2016+
Short lip spoiler for the ND (2016+) Miata from RK Design. A subtle spoiler that complements their other aero parts, as seen on their Tokyo Auto Salon show car.
This spoiler installs on the trunk and has a short lip on it for a subtle yet sporty appearance.
-Made of FRP
-Looks great
-Perfect fitment
-Requires removal of Mazda emblem
-Only available for the ND (2016+) Miata
|,|||-||PABAINFORROM|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata RoadsterSport Baffle Insert for Muffler|,|GWR-601324|,|55.00|,|49.00|,||,||,|0.000 |,||,||,||,|Mazda Miata RoadsterSport Baffle Insert for Muffler
Glass Packed baffle insert for RoadsterSport 3 Mufflers only! RoadsterSport mufflers ship with removable baffles but for those that want even more we offer these glass packed baffles. Each unit is about 7 inches long and acts like a small additional muffler that slides into the tip of your RoadsterSport. All stainless steel construction for years of driving pleasure. This is for folks that want to bring the sound DOWN for longer trips, etc. Uses same retaining screw as stock baffles. Sorry, does NOT fit older RoadsterSport 1 or II, RACE, or any other muffler.
|,|"Drop-ship fee" "add (+$9)"|-||-|||-||MAZDA-MIATA-ROADSTERSPORT-CARB-CERTIFIED-MIDPIPE-WITH-CATALYTIC-CONVERTER-AND-RESONATOR-1999-2000|,|19MAMIEXSYMU1|,|Mazda Miata Roadstersport CARB CERTIFIED Midpipe WITH Catalytic Converter AND Resonator 1999-2000|,|61-1221|,|1,199.00|,|981.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Roadstersport CARB CERTIFIED Midpipe WITH Catalytic Converter AND Resonator 1999-2000
CARB CERTIFIED using 441004-core is CARB certified for use in California for the 1999 to 2000 Miata.
The factory converter for the 1999 to 2005 Miata is a welded in part of the midpipe (California 99-00 Miatas also have second converter in the header assembly). Complete your highflow exhaust system with this midpipe...this is the best BOLT IN midpipe available for second generation Miatas and includes a highflow converter and built in resonator! Full 2.5 inches from tip to tip in all stainless steel and CARB LEGAL. ALL the mufflers we sell for 99-05 include only the muffler and not a midpipe (unlike the 90-97 choices). So if you want the flow to connect your new high flow header to your new high flow muffler here it is...for normally aspirated to supercharger or turbo (BUT does NOT fit MAZDASPEED). All stainless steel parts means years of quality performance and all the stainless parts have a lifetime warranty (300-cell ceramic catalytic converter used on all units sold in 2012 or later includes a 5 yr/50,000 mile manufacturing defect warranty on its housing and 25,000 mile manufacturing defect warranty on the internals). CARB approved and legal in California. Not for use with Racing Beat's lower rear chassis brace.
INSTALLATION: See Forum Installation Section! The slip joint in the middle of this item is your friend, lube it up and adjust length and clocking position as needed (if you ignored this note and shoved both parts fully together you made it all too short and that will cause contact with the differential which you can cure with just adding some length at the slip joint).
INSTALL NOTES and CAUTION! Is your Ignition Coil weak or failing? The most common reason people buy this midpipe is that their Miata midpipe converter has failed after 50,000 or more miles. The owners too often assume the failure is simple old age, when in fact something else is failing. Failing items such as coils, fuel pressure regulators, spark plugs, valves, plug and ignition wires, and improper ECU calibrations, can cause the engine to misfire and dump raw fuel into the catalytic converter, which will cause over heating and a meltdown in the converter, and is not a manufacturing defect in the converter. If you simply replace the midpipe and don't fix the failing car then you can expect to quickly kill any replacement converter and that replacement will NOT be a warranty replacement. Therefore, please have your car professionally inspected and repaired BEFORE you install your new midpipe.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MAZDA-MIATA-ROADSTERSPORT-CARB-CERTIFIED-MIDPIPE-WITH-CATALYTIC-CONVERTER-AND-RESONATOR-2001-2004|,|19MAMIEXSYMU1|,|Mazda Miata Roadstersport CARB CERTIFIED Midpipe WITH Catalytic Converter AND Resonator 2001-2005|,|61-1222|,|1,899.00|,|1,448.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Roadstersport CARB CERTIFIED Midpipe WITH Catalytic Converter AND Resonator 2001-2005
This is our famous midpipe but using 446005 CARB certified catalytic converter legal for use in California for the 2001 to 2004 Miata.
The factory converter for the 1999 to 2005 Miata is a welded in part of the midpipe (California 99-00 Miatas also have second converter in the header assembly). Complete your highflow exhaust system with this midpipe...this is the best BOLT IN midpipe available for second generation Miatas and includes a highflow converter and built in resonator! Full 2.5 inches from tip to tip in all stainless steel and CARB LEGAL. ALL the mufflers we sell for 99-05 include only the muffler and not a midpipe (unlike the 90-97 choices). So if you want the flow to connect your new high flow header to your new high flow muffler here it is...for normally aspirated to supercharger or turbo (BUT does NOT fit MAZDASPEED). All stainless steel parts means years of quality performance and all the stainless parts have a lifetime warranty (300-cell ceramic catalytic converter used on all units sold in 2012 or later includes a 5 yr/50,000 mile manufacturing defect warranty on its housing and 25,000 mile manufacturing defect warranty on the internals). CARB approved and legal in California. Not for use with Racing Beat's lower rear chassis brace.
INSTALLATION: See Forum Installation Section! The slip joint in the middle of this item is your friend, lube it up and adjust length and clocking position as needed (if you ignored this note and shoved both parts fully together you made it all too short and that will cause contact with the differential which you can cure with just adding some length at the slip joint).
INSTALL NOTES and CAUTION! Is your Ignition Coil weak or failing? The most common reason people buy this midpipe is that their Miata midpipe converter has failed after 50,000 or more miles. The owners too often assume the failure is simple old age, when in fact something else is failing. Failing items such as coils, fuel pressure regulators, spark plugs, valves, plug and ignition wires, and improper ECU calibrations, can cause the engine to misfire and dump raw fuel into the catalytic converter, which will cause over heating and a meltdown in the converter, and is not a manufacturing defect in the converter. If you simply replace the midpipe and don't fix the failing car then you can expect to quickly kill any replacement converter and that replacement will NOT be a warranty replacement. Therefore, please have your car professionally inspected and repaired BEFORE you install your new midpipe.
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MIATA-ROADSTERSPORT-CARB-CERTIFIED-MIDPIPE-WITH-CATALYTIC-CONVERTER-AND-RESONATOR-2005|,|19MAMIEXSYMU1|,|Mazda Miata Roadstersport CARB CERTIFIED Midpipe WITH Catalytic Converter AND Resonator 2005|,|61-1220a|,|1,899.00|,|1,698.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Roadstersport CARB CERTIFIED Midpipe WITH Catalytic Converter AND Resonator 2005
This is our famous midpipe but using 446705 CARB certified catalytic converter legal for use in California for the 2005 Miata.
The factory converter for the 1999 to 2005 Miata is a welded in part of the midpipe (California 99-00 Miatas also have second converter in the header assembly). Complete your highflow exhaust system with this midpipe...this is the best BOLT IN midpipe available for second generation Miatas and includes a highflow converter and built in resonator! Full 2.5 inches from tip to tip in all stainless steel and CARB LEGAL for all 2005 Miata. ALL the mufflers we sell for 99-05 include only the muffler and not a midpipe (unlike the 90-97 choices). So if you want the flow to connect your new high flow header to your new high flow muffler here it is...for normally aspirated to supercharger or turbo (BUT does NOT fit MAZDASPEED). All stainless steel parts means years of quality performance and all the stainless parts have a lifetime warranty. The 300-cell ceramic catalytic converter used on all units sold in 2012 or later includes a 5 yr/50,000 mile warranty on its housing and 25,000 warranty on the internals. Note the warranty covers MANUFACTURING DEFECTS, not road damage, damage from installation errors, or damage from misfires or other tuning errors that dump fuel into the converter, etc.. CARB approved and legal in California. Not for use with Racing Beat's lower rear chassis brace.
INSTALLATION: See Forum Installation Section! The slip joint in the middle of this item is your friend, lube it up and adjust length and clocking position as needed (if you ignored this note and shoved both parts fully together you made it all too short and that will cause contact with the differential which you can cure with just adding some length at the slip joint).
INSTALL NOTES and CAUTION! Is your Ignition Coil weak or failing? The most common reason people buy this midpipe is that their Miata midpipe converter has failed after 50,000 or more miles. The owners too often assume the failure is simple old age, when in fact something else is failing. Failing items such as coils, fuel pressure regulators, spark plugs, valves, plug and ignition wires, and improper ECU calibrations, can cause the engine to misfire and dump raw fuel into the catalytic converter, which will cause over heating and a meltdown in the converter, and is not a manufacturing defect in the converter. If you simply replace the midpipe and don't fix the failing car then you can expect to quickly kill any replacement converter and that replacement will NOT be a warranty replacement. Therefore, please have your car professionally inspected and repaired BEFORE you install your new midpipe.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||61-0080COMBONC2|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata RoadsterSport MAX POWER MX5 COMPLETE EXHAUST COMBO for APPEARANCE PACKAGE. 2006-2015 |,|61-0080COMBONC2|,|2,215.00|,|1,978.00|,||,||,||,||,||,||,|Mazda Miata RoadsterSport MAX POWER MX5 COMPLETE EXHAUST COMBO for APPEARANCE PACKAGE. 2006-2015
Our COMPLETE Plug and Play MX5 Exhaust Combo!
This version is for the cars with Appearance package, can also be used on 2013 Club version (see PICTURES below). Simple Bolt on for MANUAL TRANSMISSION ONLY, can be installed on Automatic but see page four of our forum header install thread for details of what is required. Appearance package brings the tip out from that 2 inch submerged look you see with the factory exhaust when car has appearance package. Pictures below of new ROLLED TIP APPEARANCE PACKAGE VERSION on TRUE RED MX5 with APPEARANCE PACKAGE (notice dividing line between upper red section of bumper and lower RED section of added appearance package). Nice flush fit for cars with appearance package!
Includes our Made In America All Stainless Steel Lifetime Warranty
*Roadstersport Header
*RoadsterSport Midpipe
*RoadsterSport Super-Q exhaust
*Both Plug and Play O2 Extension cables- needed to relocate both factory O2 sensors to the Midpipe.
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links, just short summaries below.
RoadsterSport Header! Gorgeous all T304 polished stainless steel max flow MX5 Miata header. Lifetime warranty. We have included a number of features into our MX5 Miata header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
We also put incredible effort into making the exit at the collector as smooth and perfect as we can get it because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible. Note we use the factory collector gasket....so our fit is as factory-like as possible. Note that we have no O2 sensor connection in our header....in part to keep flow as clean as we can get it but also because we could see no purpose in locating them in the header since doing so will throw a code because pulling the factory header includes removal of the first catalytic converter (code is avoided by using our included extension cables shown in the picture to locate sensors to before and after our midpipe converter). .
RoadsterSport Stainless Steel Midpipe. All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is slightly larger diameter than stock at 2.5 inches all the way through. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved). Uses monster 18 inch resonator because when you uncork this NC MX5 Miata motor it wants to get loud unless you use a resonator this large (by comparison stock resonator is about a foot long). Stock midpipe is 20 pounds, our midpipe is 16.5 pounds for total savings of 3.5 pounds. Despite very large resonator, this midpipe will raise the final sound level just sightly because of the higher flow larger diameter tubing. Our midpipe is designed to take both O2 sensors...and includes two O2 sensor connections...one before the midpipe's converter and one after the midpipe's converter to help avoid a code by simulating the factory installation before.
CARB NOTICE: Installing a header in the new 2006 through 2013 Miata means removing the first catalytic converter which means there can NEVER be a street legal header for this vehicle. Thus, the header is legal for offroad race use only, and can NEVER be CARB approved.
RoadsterSport "SUPER-Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust for Appearance Package. This attenuation chamber design unit is the most mild and mellow on an otherwise stock Miata...about 10 to 15% louder than stock...with a deep burble. This unit was designed for both improved flow performance AND the best sound absorbing ability possible. This premium MX5 muffler is an ideal choice for those who plan such additional mods as a supercharger or header change (which unleashes a massive amount of additional sound). This attenuation design is also a premium "NO-DRONE" choice for those with the AUTOMATIC transmission which tends to keep the RPMS in the lower ranges. By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....ALL THE FLOW, without the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.
INSTALL NOTES
Read full installation hints and notes in our forum Installation Instruction Section! The secret is LUBE your hangers well with dishsoap so you can get flanges aligned properly, and torque the supplied hardware to NO MORE THAN 25-30 ft/lbs (using more torque will actually result in LESS seal because you will pucker the flange out at the middle).
DYNO from our own Project 2006. Red line is best STOCK result. Blue line is best result with this RoadsterSport Max Power Header, RoadsterSport Midpipe and RoadsterSport exhaust...plus our MotoEast tune to raise the redline (intake is still STOCK). Notice lots MORE power from idle to Redline, lots more TORQUE from idle to redline, making the car much faster and more fun to drive!
|,|"Shipping cost" "add(+$169)"|-||-|||-||RC-SL0078|,|19MAMISUANDS6|,|Mazda Miata Rocar 99-05 Rear Stabilizer Links DS+PS|,|RC-SL0078|,|65.90|,|50.95|,||,||,||,||,||,||,|Mazda Miata MX-5 Rocar 99-05 Rear Stabilizer Links DS+PS
Mazda Miata 99-05 Rear Stabilizer Links Driver side + Passenger side 2pc/set
|,|||-||HARNESS-BELT-ROLL-BAR-GUIDE-COLLARS|,|NAEXVIALL|,|Mazda Miata Roll Bar Harness Collars 1990-2005|,|HBRBGC-V1|,|85.00|,|49.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Roll Bar Harness Collars 1990-2005
Roll Bar Harness Collars
Designed to fit all CMS bolt-in roll bars and harness bars
Perfectly sized to fit all CMS roll bars with 1.50" harness cross-bars. Precision-machined roll bar harness collars help keep your harness shoulder straps in exactly the right place on your roll bar. Easy to install double-split collars with high-strength Allen bolt hardware, they are available in satin black steel or lightweight aluminum -- 60% lighter! -- in brushed silver or satin black finish.
FEATURES:
Available individually.
Clamp tight to hold your shoulder straps firmly in position
Keep harness shoulder straps located properly and precisely.
Satin black powder-coated steel, lightweight brushed aluminum
The collars are sold as a pair (2).
|,|"Select Option" "Select Here" "Saint Black Steel 1.50" "Brushed Aluminum 1.50 add(+$7)"|-||-|||-||RS-097C|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata RothSport Quick Release - Clear Anodized Finish|,|RS-097C|,|499.00|,|449.05|,||,||,||,||,||,||,|Mazda Miata RothSport Quick Release
Rothsport's quick release is CNC machined from 7075 anodized aircraft alloy. It is very light and solid, with zero play and is removed and installed with one hand. The Engagement is elliptical without splines which guarantees the wheel will clock properly every time. The adapter bolts directly between a Momo, OMP, or Rothsport hub and the steering wheel, positioning the wheel 2-3/8 inches closer to the driver. This product is designed for racing use.
|,|||-||RS-097|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata RothSport Quick Release - Gold Anodized Finish|,|RS-097G|,|499.00|,|449.05|,||,||,||,||,||,||,|Mazda Miata RothSport Quick Release
Rothsport's quick release is CNC machined from 7075 anodized aircraft alloy. It is very light and solid, with zero play and is removed and installed with one hand. The Engagement is elliptical without splines which guarantees the wheel will clock properly every time. The adapter bolts directly between a Momo, OMP, or Rothsport hub and the steering wheel, positioning the wheel 2-3/8 inches closer to the driver. This product is designed for racing use.
|,|||-||RS-097R|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata RothSport Quick Release - Red Anodized Finish|,|RS-097R|,|499.00|,|449.05|,||,||,||,||,||,||,|Mazda Miata RothSport Quick Release
Rothsport's quick release is CNC machined from 7075 anodized aircraft alloy. It is very light and solid, with zero play and is removed and installed with one hand. The Engagement is elliptical without splines which guarantees the wheel will clock properly every time. The adapter bolts directly between a Momo, OMP, or Rothsport hub and the steering wheel, positioning the wheel 2-3/8 inches closer to the driver. This product is designed for racing use.
|,|||-||RS-R-LOWERING-SPRINGS|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata RS-R Lowering Springs 2016+|,|rs-r-lowering-springs|,|379.85|,|320.99|,||,||,||,||,||,||,|Mazda Miata RS-R Lowering Springs 2016+
Lowering spring kit for the ND (2016+) MX-5 made by RS*R. Made of a metal blend proprietary to RSR, these springs are very strong and will lower approximately 35~30mm front and rear.
-3 years / 50 000km warranty from RS*R
-Give your Miata a lower, more aggressive stance
-Great first step in suspension tuning
-Automatic (AT) Spring Rate : 2.86KG/mm Front / 1.53KG/mm Rear
-Manual (MT) Spring Rate : 2.85KG/mm Front / 1.48KG/mm Rear
-Only available for the ND (2016+) Miata
|,|"Select Transmission" "Automatic (AT) add(+$25.00)" "Manual (MT)"|-||-|||-||MAMIRS2COSYB|,|20MAMISUANDS2|,|Mazda Miata RS2 Coilover System by B&G (2006-2009)|,|BG-RS-50002|,|1,790.00|,|1,432.00|,||,||,|0.000 |,||,||,||,| Front and Rear Drop: 1.2-3.0" | 1.2-3.0". Fits the 2006, 2007, 2008, and 2009 Mazda MX-5 Miata.
B&G Coilovers are designed and produced exclusively by world class technicians. Each application combines race proven technology with the vehicles unique design characteristics for the ultimate in ride, handling, and comfort.
RS2 Coilovers put you in complete control with 18 levels of external dampening control (combination of Rebound and compression). Featuring monotube gas charge dampers for quick response and steering control, and a low bleed system to maintain ride quality during normal driving conditions. RS2 incorporates separate adjustments for damper length and spring perch height to allow extreme lowering with full shock travel. For street driving to occasional track use, RS2 Coilovers allow you to dial in the optimal ride height and dampening force for any driving environment.
* Adjusts height from 1.2-3 inches.
* 18 way adjustable dampening (combination of rebound and compression).
* Monotube gas charge dampers.
* High strength anodized aluminum alloy and powder coated steel components.
* Full length height adjustment with separate settings for damper force and spring pre-tension.
* Limited Lifetime Warranty.
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||MAMIS2SPSPBY|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Mazda Miata S2 Sport Springs by B&G (1990-1997)|,|BG-501017|,|289.00|,|231.20|,||,||,|0.000 |,||,||,||,|Front and Rear Drop: 1.6" | 1.6". Fits the Mazda MX-5 Miata 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997.
With over 50 years of spring design and manufacturing expertise, our S2 Sport Lowering Springs are engineered to improve handling while maintaining safety and ride quality.
B&G lowering springs are wound from high tensile Chromium-Silicone wire purchased from Europe’s premium mines. The lowering springs are cold wound on CNC coilers; heat treated and shot peened for longevity; and finished with phosphate treatment and a baked on resin powder coating for a hard corrosion resistant shell.
By redesigning the O.E. Spring and the lowering the center of gravity from 0.5-2.5 inches (depending on vehicle and application) our Technicians dramatically improve your vehicles performance and appearance. Incorporating a progressive rate design allow B&G lowering Springs to offer higher rates for improved road hold, while maintaining a comfortable ride.
* Progressive Spring rate design to maintain ride quality while improving road feel and handling
* Cold wound from high tensile chromium silicone wire and individually super blocked and computer tested against tight tolerances.
* ISO9001, QS1400, and TUV Certified
* Limited Lifetime Warranty
|,|||-||MAMIS2SPSPBY1|,|19MAMISUANDS8|,|Mazda Miata S2 Sport Springs by B&G (1999-2004)|,|BG-501029|,|289.00|,|231.20|,||,||,|0.000 |,||,||,||,|Front and Rear Drop: 1.6" | 1.6". Fits the Mazda MX-5 Miata 1999, 2000, 2001, 2002, 2003, and 2004.
With over 50 years of spring design and manufacturing expertise, our S2 Sport Lowering Springs are engineered to improve handling while maintaining safety and ride quality.
B&G lowering springs are wound from high tensile Chromium-Silicone wire purchased from Europe’s premium mines. The lowering springs are cold wound on CNC coilers; heat treated and shot peened for longevity; and finished with phosphate treatment and a baked on resin powder coating for a hard corrosion resistant shell.
By redesigning the O.E. Spring and the lowering the center of gravity from 0.5-2.5 inches (depending on vehicle and application) our Technicians dramatically improve your vehicles performance and appearance. Incorporating a progressive rate design allow B&G lowering Springs to offer higher rates for improved road hold, while maintaining a comfortable ride.
* Progressive Spring rate design to maintain ride quality while improving road feel and handling
* Cold wound from high tensile chromium silicone wire and individually super blocked and computer tested against tight tolerances.
* ISO9001, QS1400, and TUV Certified
* Limited Lifetime Warranty
|,|||-||MAMIS2SPSPBY2|,|20MAMISUANDS2|,|Mazda Miata S2 Sport Springs by B&G (2005-2009)|,|BG-501031|,|289.00|,|231.20|,||,||,|0.000 |,||,||,||,|Front and Rear Drop: 1.3" | 0.9". Fits the Mazda MX-5 Miata 2005, 2006, 2007, 2008, and 2009.
With over 50 years of spring design and manufacturing expertise, our S2 Sport Lowering Springs are engineered to improve handling while maintaining safety and ride quality.
B&G lowering springs are wound from high tensile Chromium-Silicone wire purchased from Europe’s premium mines. The lowering springs are cold wound on CNC coilers; heat treated and shot peened for longevity; and finished with phosphate treatment and a baked on resin powder coating for a hard corrosion resistant shell.
By redesigning the O.E. Spring and the lowering the center of gravity from 0.5-2.5 inches (depending on vehicle and application) our Technicians dramatically improve your vehicles performance and appearance. Incorporating a progressive rate design allow B&G lowering Springs to offer higher rates for improved road hold, while maintaining a comfortable ride.
* Progressive Spring rate design to maintain ride quality while improving road feel and handling
* Cold wound from high tensile chromium silicone wire and individually super blocked and computer tested against tight tolerances.
* ISO9001, QS1400, and TUV Certified
* Limited Lifetime Warranty
|,|||-||IL-MOTORSPORT-S2000-STARTER-NA|,|INSETE|,|Mazda Miata S2000 Starter Button 1990-1997|,|35881-S2A-911|,|199.00|,|109.95|,||,||,|0.000 |,||,||,||,|Mazda Miata S2000 Starter Button 1990-1997
This is a complete Starter Button (35881-S2A-911) from Honda, normally used in a Honda S2000.
|,|||-||SAMCO-RADIATOR-HOSES|,|19MAMIENPEVI|,|Mazda Miata Samco Performance Silicone Radiator Hoses 1990-2005|,|samco-radiator-hoses|,|166.24|,|139.00|,||,||,||,||,||,||,|Mazda Miata Samco Radiator Hoses 1990-2005
Samco Sport Hose Kits provide a unique opportunity to upgrade your engine hoses to a product that is simply unrivalled in the world today for performance and looks. The Samco Sport Hose Kits are designed to replace original equipment hoses. Superb integrity and superior performance reduce the risk of component failure and that enables higher temperatures and pressures to be maintained with complete confidence. Available in many different kits so you can upgrade exactly which hoses you want on your Miata.
|,|"Select Year" "Select Here" "1990-1993" "1994-1997" "1999-2005"|-||-|"Select color" "Select Here" "Blue" "Black" "Red"|-||-|||-||B61P-10-544|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Seal Plate Gasket 1997-2005|,|B61P-10-544|,|9.64|,|6.48|,||,||,||,||,||,||,|Mazda Miata Seal Plate Gasket 1997-2005
|,|||-||MAMISETITO|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Mazda Miata Seasonal Tire Tote (Set of 2)|,|TR-STT|,|50.00|,|27.90|,||,||,|0.000 |,||,||,||,|Mazda Miata Seasonal Tire Tote
Easily transport extra tires and keep the garage organized.
Seasonal Tire Totes are a tire carrying and storage system that takes the hassle out of changing from winter tires to summer tires. Their compact, clean styling makes them the perfect choice for the organized garage and for transporting race tires in the trunk or on the back seat of a car.
A heavy-duty shell with an easy-to-carry handle slips over the tire to protect clothing and a vehicle's interior from tire and brake residue. In their totes, tires stay neatly covered and stacked until the next season rolls around again.
• Sold in pairs
• One size fits tires 22" to 31" in overall diameter and up to 295mm section width
• Extra strong handle for easy transport
• Holds over 80 lbs.
• Hook and loop closure for easy insertion and snug fit
• Machine washable
• Rugged polyester/nylon materials and construction for years of use
• Black with silver accents
|,|||-||SECOND-STAGE-AIR-DUCT-COVER|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Second Stage Air Duct Cover 2016-2019+|,|REV-909|,|145.05|,|129.02|,||,||,||,||,||,||,|Mazda Miata Second Stage Air Duct Cover 2016+
Air duct covers made by Second Stage. Second Stage designed these interior accent pieces to have a sporty and mature feel to them. Not only that, but they also install with ease using included 3M double sided tape. The kit includes three covers, one for each air vent.
-Easy installation
-Double sided tape included
-Made in Japan
-It is an ABS piece with a Carbon Fiber pattern overlay
-Only available for the ND (2016+) Miata
-Production lead time of 30 days
|,|"Select Finish" "Black Carbon Weave" "Red Carbon Weave" "White Carbon Weave"|-||-|||-||SHORT-CONSOLE-BY-JASS-PERFORMANCE|,|NADASHBOARD|,|Mazda Miata Short Console by Jass Performance 1990-1997|,|903-845|,|259.55|,|229.02|,||,||,||,||,||,||,|Mazda Miata Short Console by Jass Performance 1990-1997
Replacing your OEM center console with one of these short consoles will radically change the look of your Miata's interior, reminiscent of interiors seen in vintage race cars. Simple, clean, nothing more than absolutely necessary. Jass consoles and boots are genuine leather, with black or contrasting red stitching, with or without vintage toggle power window switches. Shifter bezel is polished stainless steel. Installation brackets and hardware included.
|,|"Select Style" "Select Here" "Without Switches" "With Switched add(+$55)"|-||-|"Select Color" "Select Here" "Black/Black" "Black/Red"|-||-|||-||994-060|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Short Shifter Kit by Cobalt 2006-2024|,|994-060|,|224.99|,|184.02|,||,||,||,||,||,||,|Mazda Miata Short Shifter Kit by Cobalt 2006-2024
2006-2024 6-Speed Manual Trans.
The Miata has a great gearbox, but Cobalt has succeeded in making it even sportier! This Short Shift Kit reduces shift throw by 25%. Shifting is even easier with a simple flick of the wrist. To ensure OEM quality and performance factory Mazda parts are reused with this Short Shifter. Complete with instructions and ready to install. Shift knobs sold separately, or reuse your stock knob.
|,|"Select Year" "Select Here" "2006-2015" "2016-2024"|-||-|||-||GARAGE-STAR-SHORTY-CONSOLE|,|INSETE|,|Mazda Miata Shorty Console 1990-1997|,|GS-ShortyConsole-V1|,|120.00|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Shorty Console 1990-1997
The Mazda Miata shorty console adds an elegant, minimalist look to the interior of your Roadster. Crafted from fiberglass, and available in carbon fiber, the console neatly cleans up the center console area. The console is compatible with factory both power window buttons and manual windows. For added flair, a classic shift boot trim ring will be included in the console.
Also available for purchase is a cover for the gas/trunk release levers. Available in fiberglass and carbon fiber.
Note: If not in stock product can take up to 1 week to ship
|,|"Choose a Option" "Select Here" "Fiberglass Shortly Console" "Fiberglass Shortly Console W/Trunk Lever Cover add(+$70)" "Fiberglass Shortly Console W/Power Window add(+$10)" "Fiberglass Shortly Console W/Power Window W/Trunk Lever Cover add(+$80)" "Carbon fiber Shortly Console add(+$70)" "Carbon fiber Shortly Console W/Trunk Lever Cover add(+$160)" "Carbon fiber Shortly Console W/Power Window add(+$80)" "Carbon fiber Shortly Console W/Power Window W/Trunk Lever Cover add(+$170)"|-||-|||-||CM-MC1-ND|,||,|Mazda Miata Side Mirrors Covers ND 2016+|,|CM-MC1-ND|,|259.05|,|132.00|,||,||,||,||,||,||,|Mazda Miata Side Mirrors Covers ND 2016+
These cover fit on the side mirrors of your ND. Looks great with our other carbon fiber bits!
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
High grade 3M double side adhesive will be supplied with every piece for easy and reliable installation.
Available in Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
*Availability: 6-8 weeks production time
|,|"Select Option" "Carbon Fiber" "Carbon Kevlar add(+$10.00)"|-||-|||-||CM-SK1-ND|,||,|Mazda Miata Side Skirts 2016+|,|CM-SK1-ND|,|336.05|,|308.00|,||,||,||,||,||,||,|Mazda Miata Side Skirts 2016+
These side skirts are perfect to finish the sills nicely and make the car looks lower and more aggressive.
Specifications for the carbon fiber version:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
Easy to install: perfect fitment on the OEM sills. You can drill through the skirts or you can use some polyurethane adhesive sealant to bond the skirts to the sills. 3M double side adhesive supplied for the top part of the sills.
*Availability: 30 - 40 days production time
|,|"Select Option" "Select Here" "Fiberglass" "Carbon Fiber add(+$229)" "Carbon Kevlar add(+$240)"|-||-|"Shipping Cost" "add(+$69.99)|-||-|||-||MAZDA-MIATA-SIDE-WINDOW-SEALS-FOR-RACING-HARDTOP-1990-2005|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1990-1997|,|Mazda Miata Side Window (L/R) and Rear Deck Seals 1990-2005|,|50-67-7124|,|268.45|,|245.00|,||,||,||,||,||,||,|Mazda Miata Side Window (L/R) and Rear Deck Seals 1990-2005
This is the complete set of weather-proofing seals for the NA/NB (1990-2005) fiberglass hardtop. They consist of the side windows (L/R) and the rear deck area. They are simple to install with the self-adhesive.
If you order these with the hardtop, they will be shipped in the same box. Shipping only applies when ordered separately.
|,|||-||50-66-7122|,|MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|Mazda Miata Side Window (L/R) and Rear Deck Seals 2006-2015|,|50-66-7124|,|289.45|,|245.00|,||,||,||,||,||,||,|Mazda Miata Side Window (L/R) and Rear Deck Seals 2006-2015
This is the complete set of weather-proofing seals for the MX-5 NC (2006-2014) fiberglass hardtop. They consist of the side windows (L/R) and the rear deck area. They are simple to install with the self-adhesive.
If you order these with the hardtop, they will be shipped in the same box. Shipping only applies when ordered separately.
|,|||-||MAMICHS15GU1|,|CHWH|,|Mazda Miata SILVER Chaparral Wheel Vintage Look 15x7 Chaparral +38 Offset|,|400-000|,|199.99|,|179.95|,||,||,|5.000 |,||,||,||,|
The Venerable Chaparral: Perhaps the Best selling replacement wheel for the Miata.
It is time to give that Miata in your driveway the Vintage stance the both of you have been yearning for! The Chaparral S 15's timeless 8-Spoke appearance together with its sporty character is the wheel truly befits the Miata's classic styling cues. But do not let the Chaparral's old school looks and warm charm deceive you; they are produced in state-of-the-art production facilities, using the latest CAD/CAM Manufacturing methods. All Chaparral wheels are crafted by a low-pressure casting process and specially heat-treated for enhanced strength and durability. With Miata specific, 54.1 Hub Center Bore, proper offset and quality that surpasses OEM standards, the Chaparral line offers stunning looks at an affordable price. The Chaparral is one of the best selling replacement wheels for the Mazda Miata. Order a set today!
Click on the photo for a larger view
|,|"Shipping Cost" "add(+$49.99)"|-||-|||-||SKUNK2-THROTTLE-BODY-NA|,|19MAMIENPEAI|,|Mazda Miata Skunk2 Pro Series 64mm Throttle Body 1994-1997|,|SK2-309-10-0100|,|360.00|,|340.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Skunk2 Pro Series 64mm Throttle Body 1994-1997
Skunk2 is proud to introduce its 64mm Pro Series Throttle Body for the ’94-’97 NA, and ’99-‘05 NB Mazda Miata in its exclusive, hard anodized finish. Skunk2’s 64mm Pro Series Throttle Body is designed to be used with the OEM intake manifold for bolt-on horsepower and torque gains by maximizing engine airflow.
Skunk2 throttle bodies undergo an extensive design and testing process to produce a throttle body that doesn't just provide more flow but retains smooth drivability and OEM throttle characteristics. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, which results in a unit that exceeds industry standards. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2’s signature finish. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and ultra-strong, upgraded shafts for ultimate durability. All necessary hardware and a new throttle body gasket are included for trouble-free installation.
A larger throttle body is key to producing additional power throughout the powerband on modified engines with increased airflow demands. Skunk2’s Pro Series Throttle Bodies for Miatas feature a large, 64mm bore, which results in significant horsepower gains throughout the powerband on heavily modified, naturally aspirated applications and even more on forced induction ones.
|,|||-||MAZDA-MIATA-SMALL-RUBBER-SHIFT-BOOT-1990-2005|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Small Rubber Shift Boot 1990-2005 - Sale!|,|NAB-7300|,|49.99|,|28.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Small Rubber Shift Boot 1990-2005
This Shifter Dust Boot its all Mazda Miata MX-5 Fits 1990-2005
Small shift boot at base of shift lever otherwise known as the shifter turret. The factory shift boots are usually become torn with 60,000 miles and leak oil on the transmission and then the floor until the turret became dry up; with the use of newer specially formulated rubbers these turret seals should last well beyond to protect you shifter mechanism.
Its a good idea to change this component at clutch intervals.
Note: This component is designed to fit all years 1990 - 2005 Replaces both Mazda Part Number M513-17-480A and M514-17-480A
|,|||-||MAMISMRETA19|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata Smoked Rear Taillights 1990-1997 - Sale!|,|509-337|,|329.99|,|189.95|,||,||,|0.000 |,||,||,||,|
These Mazda Miata Smoked Rear Taillights will give your Miata a great look that will truly set it apart. The car in the photo is our company Miata, and we get compliments on these lights all the time.
Try a set on your Miata and you won't be dissapointed. These are the real deal with incredible craftsmanship. Don't settle for cheap imitations.
DOT Approved
Price is for the pair. Easy installation in less than 30 minutes. At this time, they are only available for the 90-97 Miata.
Click on the photo for a larger view
|,|||-||162-889|,|NEW|,|Mazda Miata Smoked Side Marker Lamp Set by I.L. Motorsport 1990-2005|,|162-889|,|99.05|,|89.98|,||,||,||,||,||,||,|Mazda Miata Smoked Side Marker Lamp Set by I.L. Motorsport 1990-2005
Designed for your NAs and NBs, the stylish and practical smoked side-marker lamps by I.L. Motorsport fit both the front and rear corners perfectly. Easy to put together, this replacement-kit includes 4 side-markers, 4 gaskets, 4 bulbs, 8 screws and the wiring.
Note:
- The bulbs in this kit are clear, so if desired, feel free to re-use the original front side marker amber bulbs.
- Just like the original side reflectors, all four have an opening for the bulb.
|,|||-||CM-LC1-ND|,||,|Mazda Miata Soft Top Latch Cover 2015+|,|CM-LC1-ND|,|109.50|,|98.50|,||,||,||,||,||,||,|Mazda Miata Soft Top Latch Cover 2015+
This carbon fiber cover replaces the OEM plastic one on top of the soft top latch of the ND.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
– 3M double side adhesive supplied with each piece
|,|"Select Option" "Carbon Fiber" "Carbon Kevlar Add(+$10)"|-||-|||-||SPNMIFRLIP|,|NAEXBOST|,|Mazda Miata SPN Front Lip 1990-1997|,|CAD-2FL|,|175.00|,|149.00|,||,||,|50.000 |,||,||,||,|Mazda Miata SPN Front Lip
Quality Fiberglass
Out of Stock, please click on "You May Also Like" for similar parts
|,|||-||MAMISPCLDIBY|,||,|Mazda Miata Sport/Race Clutch Disc by Racing Beat (1990-1993)|,|152-523|,|200.00|,|189.00|,||,||,|0.000 |,||,||,||,|Sport/Race Clutch Disc 1990-93 Miata
The Sport/Race Clutch Disc is manufactured using a sprung-hub riveted to a steel disc on which six sintered copper pads are bonded. This low-inertia disc is primarily intended for race use, but can be used for high performance street applications.
|,|||-||SPDYSMEX|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Springfield Dyno SM Exhaust 1990-2005|,|MC-SDE|,|499.99|,|395.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Springfield Dyno SM Exhaust
Lightweight, mandrel bent exhaust for your SpecMiata. The system weighs only 15.5lbs, roughly 4 lbs lighter than the MazdaComp system.
Straighter than most on the market, it allows for improved flow, resulting in over 4hp and 4lb feet of torque more than the MazdaComp system. This is what the front runners throughout the country are running.
Available for 1.6L or 1.8L cars.
Not CARB approved and never will be in CA, Legal for Offroad Race Vehicles Only.
|,|"Select Year" "Select Here" "1990-1993 1.6L" "1994-1997 1.8L" "1999-2005 1.8L"|-||-|"Shipping Cost" "add(+$89)"|-||-|||-||SRPMACALPED|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata SRP Machined Aluminum Pedals 1990-2005 - SALE|,|401-101|,|129.99|,|79.95|,||,||,|0.000 |,||,|ghhs|,||,|Mazda Miata SRP Machined Aluminum Pedals 1990-2005
These are a fantastic upgrade to any Miata. Aside from the excellent grip these pedals provide, they will be one of the first things people notice and compliment when they look at your car.
Pictures cannot do these pedals justice..you just have to see how incredible they will make your cockpit look.
Complete 4 Piece Set with all hardware and detailed instruction included. Not compatible with automatic Miatas.
*New* Matte Finish Look!
(Matte on the left - Original Polished on right)
Only the standard pedals (no engraving) are available.
|,|"Select Year & Finish" "1990-1997 Polished" "1990-1997 Matte" "1999-2005 Polished" "1999-2005 Matte add(+$20)"|-||-|||-||20SRPALPE|,|20MAMIINPE|,|Mazda Miata SRP Racing Aluminum Pedals 2006-2021|,|401-306|,|129.99|,|78.95|,||,||,|0.000 |,||,||,||,|Mazda Miata SRP Racing Aluminum Pedals 2006-2021
These are a fantastic upgrade to any Miata. Aside from the excellent grip these pedals provide, they will be one of the first things people notice and compliment when they look at your car.
Pictures cannot do these pedals justice..you just have to see how incredible they will make your cockpit look.
Complete 4 Piece Set with all hardware and detailed instruction included. Not compatible with automatic Miatas.
|,|"Please select" "Matte Finish (pictured)" "Polished Finish"|-||-|||-||MAZDA-MIATA-I-L--MOTORSPORT-STAINLESS-GRILL-JAWS-LOOK-1999--2000|,|NBGRILLANDBRA|,|Mazda Miata Stainless Grill Jaws Look 1990-2005|,|NB0-41801|,|129.99|,|109.95|,||,||,||,||,||,||,|Mazda Miata Stainless Grill Jaws Look 1990-2000
The are the coolest Grills we have seen yet for the Miata that offers a combination of retro and aggressiveness. Nicknames by proud owners, Jaws look grill is offers both protection and attitude.
Features: Stainless Steel Construction
|,|"Select Year" "Select Here" "1990-1997 add(+$10)" "1999-2000" "2001-2005, Not MazdaSpeed"|-||-|||-||900-482|,|19MAMIEXVEAL|,|Mazda Miata Stainless Steel Cat-Back Exhaust with Dual Tip Muffler by Cobalt 1990-1997|,|900-482|,|689.95|,|569.98|,||,||,||,||,||,||,|Mazda Miata Stainless Steel Cat-Back Exhaust with Dual Tip Muffler by Cobalt 1990-1997
Treat your Miata to one of the finest Sport Exhausts available - Now with Dual Tips! Cobalt's beautiful polished stainless muffler is full of features normally found in more expensive exhaust systems. Wanting only the best, this cat-back exhaust has an extensive set of features that make it the best:
1.2 mm thick polished Stainless Steel used for muffler shell, tips, and piping
Muffler packing is a combination of stainless steel wool and fiberglass for a perfect sport scar sound that is never intrusive
CNC cut Stainless steel flanges
Stainless Steel for inner core and perforated tubing
2-1/4'' Pipe Diameter
Beautifully shaped oval Muffler
All welds on muffler are ground smooth and polished
Entire muffler completely polished to a mirror shine
Sporty 3-1/2" slash cut insulated and polished muffler tip
5 Year Warranty*
Note: If you have a 1990-1995(OBD 1) car, you must buy an O-2 sensor bung plug, Part # 051-012.
With a sporty exhaust note and a mirror polish that shines like chrome, Cobalt's Miata Sport Exhaust is the perfect piece of eye candy for your favorite Roadster. Moss' huge buying power brings this one of a kind muffler to the market at a truly affordable price.
*This muffler is warranted to the original purchaser of record and for the original vehicle on which the product was installed, against defects in materials and workmanship for 5 years. Moss' sole obligation under this warranty shall be limited to repair or replacement at Moss' option, provided that the muffler discloses a manufacturing defect. Warranty is void if any defects are caused by a physical impact of any kind
|,|"Bung Plug for O2 Sensor" "Yes add(+$7.98)"|-||-|"Shipping cost" "add(+$95)"|-||-|||-||MS-910-327|,|NBINDA|,|Mazda Miata Stainless Steel Gauge Cluster Bezel by Jass 1999-2005|,|ms-910-327|,|59.55|,|49.65|,||,||,||,||,||,||,|Mazda Miata Stainless Steel Gauge Cluster Bezel by Jass 1999-2005
Brushed stainless steel instrument cluster surround for Miata. These bezels match the Jass stainless steel design of the instrument and HVAC backplate. Comes with stainless plates for the Tachometer and Speedometer dials, to bring the most out of the stock black classic gauge faces.
|,|||-||244-015|,|NBLURAEX|,|Mazda Miata Stainless Steel Luggage Rack 1990-2005|,|244-015|,|299.45|,|279.90|,||,||,||,||,||,||,|Mazda Miata Stainless Steel Luggage Rack 1990-2005
Luggage racks are an extremely useful accessory, particularly when touring, providing invaluable extra luggage space. These clip-on boot racks, available in stainless steel, are ideal for occasional use. They are supplied with fittings; including rubber feet, strap clamps and a third support bracket which can be used at the front of the trunk lid to help reduce stress on the side brackets, or kept as a spare.
|,|"Oversize Fee" "add(+$15.00)"|-||-|||-||MAZDA-MIATA-STAINLESS-STEEL-WIRE-MESH-GRILLE-1990-1997|,|NAEXGRBRA|,|Mazda Miata Stainless Steel Wire Mesh Grille 1990-1997|,|CC-P1068M|,|109.99|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Stainless Steel Wire Mesh Grille 1990-1997
Enhance your Miata's good looks and keep out unwanted debris with a Wire Mesh Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Mesh Grilles are made of stainless steel. The black ones additionally have a durable powdercoated - not painted - finish. Installation is easy. This should have been a factory part; no Miata should be without one.
Choose from bright stainless steel or black powdercoated stainless steel.
Requires removing tow hooks and easily installs under factory bolts.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||MAZDA-MIATA-GRILLE--WIRE-MESH-STAINLESS-STEEL-1999-2000|,|NBGRILLANDBRA|,|Mazda Miata Stainless Steel Wire Mesh Grille 1999-2000|,|CC-P1113M|,|109.99|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Stainless Steel Wire Mesh Grille 1999-2000
Enhance your Miata's good looks and keep out unwanted debris with a Wire Mesh Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Mesh Grilles are made of stainless steel. The black ones additionally have a durable powdercoated - not painted - finish. Installation is easy. This should have been a factory part; no Miata should be without one.
Choose from bright stainless steel or black powdercoated stainless steel.
Requires removing tow hooks and easily installs under factory bolts.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||MAZDA-MIATA-STAINLESS-STEEL-WIRE-MESH-GRILLE-2001-2005|,|NBGRILLANDBRA|,|Mazda Miata Stainless Steel Wire Mesh Grille 2001-2005|,|CC-P1130M|,|109.99|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Stainless Steel Wire Mesh Grille 2001-2005
Enhance your Miata's good looks and keep out unwanted debris with a Wire Mesh Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Mesh Grilles are made of stainless steel. The black ones additionally have a durable powdercoated - not painted - finish. Installation is easy. This should have been a factory part; no Miata should be without one.
Choose from bright stainless steel or black powdercoated stainless steel.
Requires removing tow hooks and easily installs under factory bolts.
Note: Does not fit MazdaSpeed version
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||P1068P|,|NAEXGRBRA|,|Mazda Miata Standard Protective Grille 1990-1997|,|p1068p|,|45.99|,|34.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Standard Protective Grille 1990-1997
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Protective Grilles are made of steel, and have a durable powdercoated - not painted - finish of silver or black. They visually stand out more than the High-Flow Grilles but let plenty of air through, having 58% open area.
Installation is easy. This should have been a factory part; no Miata should be without one.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat"|-||-|||-||P1113P|,|NBGRILLANDBRA|,|Mazda Miata Standard Protective Grille 1999-2000|,|p1113p|,|45.99|,|34.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Standard Protective Grille 1999-2000
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Protective Grilles are made of steel, and have a durable powdercoated - not painted - finish of silver or black. They visually stand out more than the High-Flow Grilles but let plenty of air through, having 58% open area.
Installation is easy. This should have been a factory part; no Miata should be without one.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat"|-||-|||-||P1130P|,|NBGRILLANDBRA|,|Mazda Miata Standard Protective Grille 2001-2005|,|p1130p|,|45.99|,|34.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Standard Protective Grille 2001-2005
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Protective Grilles are made of steel, and have a durable powdercoated - not painted - finish of silver or black. They visually stand out more than the High-Flow Grilles but let plenty of air through, having 58% open area.
Installation is easy. This should have been a factory part; no Miata should be without one.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat"|-||-|||-||P1167P|,||,|Mazda Miata Standard Protective Grille 2004-+ MazdaSpeed|,|p1167p|,|55.95|,|48.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Standard Protective Grille 2004-+ MazdaSpeed
Enhance your Miata's good looks and keep out unwanted debris with this Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Protective Grilles are made of steel, and have a durable powdercoated - not painted - finish of silver or black. They visually stand out more than the High-Flow Grilles but let plenty of air through, having 58% open area.
Installation is easy. This should have been a factory part; no Miata should be without one.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||MAZDA-MIATA-STEERING-SHAFT-ADAPTOR1|,|NBINVIALL|,|Mazda Miata Steering Shaft Adaptor |,|steering-shaft-adaptor|,|179.99|,|159.00|,||,||,||,||,||,||,|Mazda Miata Steering Shaft Adaptor
Finally a high quality billet Aluminum steering shaft adaptor that utilizes the stock Mazda steering shaft splines and stock nut. No welding!
Once you remove your stock steering wheel, simply slide the steering shaft adaptor over the steering shaft and the put the stock nut back on and you are done. This steering shaft adaptor has female splines on the inside that index the male splines from the stock steering shaft and uses the stock taper on the steering shaft so it works just like the Mazda factory steering wheel setup.
Once the steering shaft adaptor is in place you have the 6 bolt steering wheel pattern used by most steering wheel (Sparco, Momo, OMO) and quick disconnect manufacturers. You can install an steering wheel directly to it without a quick disconnect, or you can bolt in a quick disconnect in between the adaptor an the steering wheel.
This setup is completely modular, so from there you can add (optional parts) steering spacers in 1/2” or 2.5” increments to put the steering wheel exactly where you want it.
This part is a race car part and not a street car part on a race car. Take a look at the last image in the gallery to see what happens to street car parts that get put on race cars. The part in question has a cheap cast splined section and the stand offs that push the steering wheel closer to the driver were not designed to withstand the forces and abuse we put them through in a race environment.
Quick Disconnect is NOT included in this price.
Choose from the drop down list to add a quick disconnect.
Quick Disconnect Options:
Option 1 - DPI Splined Quick Disconnect. This is the same QD we use on our thread/weld on Splined Steering Shaft Adaptor product. This QD is very nice and economical. it has 3 index points where most only have 2 points which eliminates slop and gives a nice solid feel. The only downside to this QD is that it splined and the steering wheel could be put on and not be straight if not aligned properly when putting it on. A simple paint line on the top of the QD and the Male portion of the QD will give you an indicator for straight. This QD can be removed with 1 hand. Made in the USA.
Option 2 - NRG Quick Disconnect. This is a very popular quick disconnect and is reasonable for the money. It will only go on one way, so you are guaranteed to have the steering wheel in the proper position when installing it. It is my opinion that this is a "Fast and Furious" street car piece and is way too big and bulky for a race car. This QD requires 2 hands to remove it with an un modified part. Made in China.
Option 3 - Sbox Engineering Porsche style Quick Disconnect. This piece is amazing. Super light weight and has ZERO slop. It only allows the wheel to go on one way making sure it it always in the proper position. This QD can be removed with 1 hand. Made in the USA.
Option 4 - You can add your own Quick Disconnect that utilizes the Momo/Sparco/OMP 6 bolt european bolt pattern.
Choose from the drop down list to add a quick disconnect.
|,|"Quick Disconnect Options" "None" "DPI Bolt on Splined Quick Disconnect add(+$100)"
"NRG Quick Disconnect add(+$150)" "Sbox - Porsche Style Quick Disconnect add(+$375)"|-||-|"Options" "None" "Steering Shaft Spacer - 1/2' add(+$45)"
"Steering Shaft Spacer - 2.5' add(+$100)"|-||-|||-||SBH-MZ01B-GD|,|NBINVIALL|,|Mazda Miata STEERING WHEEL HUB ADAPTER (55MM) 1990-2015|,|SBH-MZ01B-GD|,|189.90|,|149.90|,||,||,||,||,||,||,|Mazda Miata STEERING WHEEL HUB ADAPTER (55MM) 1990-2015
Circuit Sports one piece solid CNC machined billet aluminum, 55MM steering wheel hub is designed specifically to ensure durability, strength, and safety. Utilizing a universal 12 bolt multi-pattern design, users can secure their favorite aftermarket steering wheel with optional quick releases. Designed with OEM quality in mind, installation is effortless with precision fitment. The hub has been anodized gloss black for a nice and clean finish.
Will work with Nardi and MOMO bolt patterns
|,|"Select Year" "Select Here" "1990-1997" "1999-2005" "2006-2015 add(+$25)"|-||-|||-||STILLEN-MAZDA-MIATA-FRONT-CROSS-DRILLED-1-PIECE-SPORT-ROTORS-1990-1993|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata Stillen Front Cross Drilled 1-Piece Sport Rotors 1990-1993|,|MAZ2000|,|151.35|,|136.22|,||,||,||,||,||,||,|Stillen Mazda Miata Front Cross Drilled 1-Piece Sport Rotors
STILLEN One-piece Sport Rotors are a great choice for performance, durability and style when staying with OE factory calipers. These high-performance upgrades directly replace those plain OE factory rotors with no modification required. Applications for cars are finished with a tough clear zinc plating for exceptional corrosion resistance and to avoid the pad contamination and environmental issues with cadmium plating. Most truck and SUV applications have a tough, black e-coat to keep the elements at bay.
Why cross-drilled or slotted (or both)?
Cross-drilled rotors are a quick and simple way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder when it's time to stop NOW! Tests have shown (and drivers can feel) the immediate improvement. The holes also provide better cooling under hard use. Pad wear may be accelerated slightly (depending on driving technique), so only high quality brake pads should be considered. Cross-drilled rotors are not recommended for serious track duty - choose Slotted or Hook Slot rotors (when available) instead for elevated temperature use.
But I've read that cross-drilled rotors are prone to...
While there is often some strand of truth in the various tales circulating around the Internet, we have found that many issues related to premature cracking or irregular pad wear are due to rotors made of inferior materials, substandard manufacturing techniques, poor pattern design or improper use. With over two decades of experience in high-performance brake upgrades, STILLEN has proven that high-quality, well-made cross-drilled rotors are a worthy upgrade for high-performance driving duty short of serious track days.
What makes STILLEN Sport Rotors different?
High-quality, 1-piece blanks are sourced from the world's best foundries. Each application is carefully scrutinized for the optimum face pattern, whether cross-drilled, slotted, cross-drilled and Slotted or Hook Slot. The latest CAD (Computer-Aided Design) tools are used to optimize the face pattern for full pad sweep to reduce hot spots and grooving.
All cross-drilled holes are radius-chamfered with special tooling to minimize stress-raisers for maximum resistance to heat and longer rotor life compared to lower-priced offerings. Slots are ramped to reduce pad dust retention and noise. STILLEN Sport Rotors arrive finished, machine-balanced and ready to install!
I spent a lot on custom wheels. What will these rotors look like months from now?
Sport Rotors for most car applications are zinc plated for corrosion resistance, which keeps them looking good and rust-free in most environments. Truck/SUV applications are typically black E-coated for a tough, rust-resistant appearance.
OK, I'm ready to upgrade. What next?
Enhance a new set of Sport Rotors with STILLEN Metal Matrix brake pads or choose from other performance pad options. For the complete package, choose stainless steel braided brake lines and fresh AP Racing brake fluid for a more positive brake pedal feel and resistance to fluid boiling. Remember, car manufacturers recommend a brake system flush at no longer than 24 month intervals, shorter for hard brake use. If it has been too long, upgrading brake lines at the same time will save time and labor.
|,|"Special Handling fee" add((+$10)"|-||-|||-||STILLEN-MAZDA-MIATA-FRONT-CROSS-DRILLED-1-PIECE-SPORT-ROTORS-1994-2005|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata Stillen Front Cross Drilled 1-Piece Sport Rotors 1994-2005|,|MAZ2100|,|170.58|,|153.52|,||,||,||,||,||,||,|Stillen Mazda Miata Front Cross Drilled 1-Piece Sport Rotors 1994-2005
STILLEN One-piece Sport Rotors are a great choice for performance, durability and style when staying with OE factory calipers. These high-performance upgrades directly replace those plain OE factory rotors with no modification required. Applications for cars are finished with a tough clear zinc plating for exceptional corrosion resistance and to avoid the pad contamination and environmental issues with cadmium plating. Most truck and SUV applications have a tough, black e-coat to keep the elements at bay.
Why cross-drilled or slotted (or both)?
Cross-drilled rotors are a quick and simple way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder when it's time to stop NOW! Tests have shown (and drivers can feel) the immediate improvement. The holes also provide better cooling under hard use. Pad wear may be accelerated slightly (depending on driving technique), so only high quality brake pads should be considered. Cross-drilled rotors are not recommended for serious track duty - choose Slotted or Hook Slot rotors (when available) instead for elevated temperature use.
But I've read that cross-drilled rotors are prone to...
While there is often some strand of truth in the various tales circulating around the Internet, we have found that many issues related to premature cracking or irregular pad wear are due to rotors made of inferior materials, substandard manufacturing techniques, poor pattern design or improper use. With over two decades of experience in high-performance brake upgrades, STILLEN has proven that high-quality, well-made cross-drilled rotors are a worthy upgrade for high-performance driving duty short of serious track days.
What makes STILLEN Sport Rotors different?
High-quality, 1-piece blanks are sourced from the world's best foundries. Each application is carefully scrutinized for the optimum face pattern, whether cross-drilled, slotted, cross-drilled and Slotted or Hook Slot. The latest CAD (Computer-Aided Design) tools are used to optimize the face pattern for full pad sweep to reduce hot spots and grooving.
All cross-drilled holes are radius-chamfered with special tooling to minimize stress-raisers for maximum resistance to heat and longer rotor life compared to lower-priced offerings. Slots are ramped to reduce pad dust retention and noise. STILLEN Sport Rotors arrive finished, machine-balanced and ready to install!
I spent a lot on custom wheels. What will these rotors look like months from now?
Sport Rotors for most car applications are zinc plated for corrosion resistance, which keeps them looking good and rust-free in most environments. Truck/SUV applications are typically black E-coated for a tough, rust-resistant appearance.
OK, I'm ready to upgrade. What next?
Enhance a new set of Sport Rotors with STILLEN Metal Matrix brake pads or choose from other performance pad options. For the complete package, choose stainless steel braided brake lines and fresh AP Racing brake fluid for a more positive brake pedal feel and resistance to fluid boiling. Remember, car manufacturers recommend a brake system flush at no longer than 24 month intervals, shorter for hard brake use. If it has been too long, upgrading brake lines at the same time will save time and labor.
|,|"Application" "Mazda Miata 1994-2005"|-||-|"Special Handling fee" add((+$10)"|-||-|||-||STILLEN-MAZDA-MIATA-FRONT-CROSS-DRILLED-1-PIECE-SPORT-ROTORS-2006-2007|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Stillen Front Cross Drilled 1-Piece Sport Rotors 2006-2007|,|MAZ2300|,|249.44|,|192.20|,||,||,||,||,||,||,|Stillen Mazda Miata Front Cross Drilled 1-Piece Sport Rotors 2006-2007
STILLEN One-piece Sport Rotors are a great choice for performance, durability and style when staying with OE factory calipers. These high-performance upgrades directly replace those plain OE factory rotors with no modification required. Applications for cars are finished with a tough clear zinc plating for exceptional corrosion resistance and to avoid the pad contamination and environmental issues with cadmium plating. Most truck and SUV applications have a tough, black e-coat to keep the elements at bay.
WHY CROSS-DRILLED OR SLOTTED (OR BOTH)?
Cross-drilled rotors are a quick and simple way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder when it's time to stop NOW! Tests have shown (and drivers can feel) the immediate improvement. The holes also provide better cooling under hard use. Pad wear may be accelerated slightly (depending on driving technique), so only high quality brake pads should be considered. Cross-drilled rotors are not recommended for serious track duty - choose Slotted or Hook Slot rotors (when available) instead for elevated temperature use.
BUT I'VE READ THAT CROSS-DRILLED ROTORS ARE PRONE TO...
While there is often some strand of truth in the various tales circulating around the Internet, we have found that many issues related to premature cracking or irregular pad wear are due to rotors made of inferior materials, substandard manufacturing techniques, poor pattern design or improper use. With over two decades of experience in high-performance brake upgrades, STILLEN has proven that high-quality, well-made cross-drilled rotors are a worthy upgrade for high-performance driving duty short of serious track days.
WHAT MAKES STILLEN SPORT ROTORS DIFFERENT?
High-quality, 1-piece blanks are sourced from the world's best foundries. Each application is carefully scrutinized for the optimum face pattern, whether cross-drilled, slotted, cross-drilled and Slotted or Hook Slot. The latest CAD (Computer-Aided Design) tools are used to optimize the face pattern for full pad sweep to reduce hot spots and grooving.
All cross-drilled holes are radius-chamfered with special tooling to minimize stress-raisers for maximum resistance to heat and longer rotor life compared to lower-priced offerings. Slots are ramped to reduce pad dust retention and noise. STILLEN Sport Rotors arrive finished, machine-balanced and ready to install!
I SPENT A LOT ON CUSTOM WHEELS. WHAT WILL THESE ROTORS LOOK LIKE MONTHS FROM NOW?
Sport Rotors for most car applications are zinc plated for corrosion resistance, which keeps them looking good and rust-free in most environments. Truck/SUV applications are typically black E-coated for a tough, rust-resistant appearance.
OK, I'M READY TO UPGRADE. WHAT NEXT?
Enhance a new set of Sport Rotors with STILLEN Metal Matrix brake pads or choose from other performance pad options. For the complete package, choose stainless steel braided brake lines and fresh AP Racing brake fluid for a more positive brake pedal feel and resistance to fluid boiling. Remember, car manufacturers recommend a brake system flush at no longer than 24 month intervals, shorter for hard brake use. If it has been too long, upgrading brake lines at the same time will save time and labor.
|,|"Application" "Mazda Miata 2006-2007"|-||-|"Special Handling fee" "add(+$15)"|-||-|||-||STILLEN-MAZDA-MIATA-FRONT-SLOTTED-1-PIECE-SPORT-ROTORS-1994-2005|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Stillen Front Slotted 1-Piece Sport Rotors 1994-2005|,|MAZ2100S|,|182.58|,|164.32|,||,||,||,||,||,||,|Stillen Mazda Miata Front Slotted 1-Piece Sport Rotors 1994-2005
Slotted brake rotors are a great upgrade for any car and will improve your vehicles braking performance immensely. The slotted rotors allow a channel for the brake pad gases to escape and allow the rotor to have a more direct friction surface to the brake pad. Many people prefer slotted rotors as they are more durable and resilient than other performance rotor solutions.
As with all STILLEN brake rotors, you can be rest assured that these slotted rotors are a direct replacement for your factory rotors and will fit perfectly with your factory brake calipers!
Slotted rotors provide much of the increased pad bite that cross-drilled rotors do, but can handle the heat of more aggressive use. The slots act as a wiper, cleaning the pad face as they go by to reduce pad glazing, keeping the pads fresh for optimal performance.
Since slotted rotors do not have holes piercing all the way through the brake rotor, they are much stronger than a cross drilled rotor or a cross drilled and slotted rotor. With performance driving, the demand on your brake rotors increases substantially from everyday driving. Slotted rotors can typically take more abuse than cross drilled rotors. When pushed to the limit, slotted rotors are able to expand and contract with temperature change evenly around the entire rotor. Drive with confidence knowing you have one of the best slotted brake rotors on the market today!
Features of STILLEN Slotted Rotors:
- Increased pad bite, without fear of stress-risers possible with cross-drilled rotors under aggressive driving with elevated temperature use.
- Slotted rotors act as a wiper, cleaning the pad face as they go by which can reduce pad glazing, keeping the pads fresh for optimal performance.
- Great choice for track days or where spirited driving is the norm.
- Less chance of cracking over a cross drilled rotor
- Manufactured with the latest CNC equipment.
- Slotted rotors arrive finished, machine-balanced and ready to install!
Slotted Rotor Corrosion Protection
At STILLEN, we finish the slotted rotors with durable clear zinc plating. This barrier prevents corrosion on non-friction surface areas and keeps the slotted rotors looking great and guaranteeing a long service life! Most of our truck applications are finished with a great looking black e-coat finish. This really stands out and the slotted rotors look VERY cool inside any wheel.
STILLEN only offers high quality brake components for your vehicle. Along with our high performance slotted rotors, STILLEN provides big brake kits, steel brake lines, and performance brake pads.
|,|"Application" "Mazda Miata 1994-2005"|-||-|||-||STILLEN-MAZDA-MIATA-REAR-CROSS-DRILLED---SLOTTED-1-PIECE-SPORT-ROTORS-1994-2005|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Stillen Rear Cross Drilled & Slotted 1-Piece Sport Rotors 1994-2005|,|MAZ2101XS|,|227.46|,|212.90|,||,||,||,||,||,||,|Stillen Mazda Miata Rear Cross Drilled & Slotted 1-Piece Sport Rotors 1994-2005
Cross drilled and slotted rotors combine the best features of a slotted rotor and a cross drilled rotor. Fewer holes mean longer brake pad life with no penalty in the way of initial brake pad bite. The improved bite and cooling from the cross drilled pattern combined with the ventilation and pad out gassing offered by the slots offers the best of both worlds.
When you look through the wheel of a vehicle and you see the aggressive cross drilled slotted pattern, you know that driver is serious about performance! STILLEN's cross drilled and slotted rotors are engineered to bolt directly to your factory braking system and require no modifications. The average driver will not notice any excess wear or decrease in durability over a cross drilled or slotted rotor.
Features of STILLEN Cross Drilled & Slotted Rotors:
- Combines the benefits of cross-drilling and slotting for the best of both worlds.
- Fewer holes mean longer pad life with little penalty in the way of initial pad bite.
- Additional leading edges offer improved brake pad grip.
- Under hard use, cross drilled holes provide better cooling.
- Holes are radius-chamfered with special tooling, minimizing stress-risers for maximum resistance to heat and longer rotor life compared to lower-priced cross drilled and slotted rotor offerings.
- CAD software is used to design and test the optimum face pattern for full pad sweep, reduced hot spots and minimal grooving.
- Rotors arrive finished, machine-balanced and ready to install!
- If you're into high performance driving or push your vehicle's limits on the track, then a cross drilled and slotted rotor is for you. If you drive in a mountainous environment where hard braking is the norm, a cross drilled and slotted rotor is for you as well. The everyday driver who is serious about the styling of their vehicle and enjoys maximum braking performance will be more than satisfied with a cross drilled and slotted rotor.
For optimum braking performance, we recommend pairing your new Cross Drilled and Slotted Rotors with a set of high performance brake pads and steel brake lines.
|,|"Application" "Mazda Miata 1994-2005"|-||-|"Special Handling fee" "add(+$10)"|-||-|||-||STILLEN-MAZDA-MIATA-REAR-CROSS-DRILLED-SLOTTED-1-PIECE-SPORT-ROTORS-2006-2007|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Stillen Rear Cross Drilled & Slotted 1-Piece Sport Rotors 2006-2007|,|MAZ3401XS|,|236.15|,|199.05|,||,||,||,||,||,||,|Stillen Mazda Miata Rear Cross Drilled & Slotted 1-Piece Sport Rotors 2006-2007
Cross drilled and slotted rotors combine the best features of a slotted rotor and a cross drilled rotor. Fewer holes mean longer brake pad life with no penalty in the way of initial brake pad bite. The improved bite and cooling from the cross drilled pattern combined with the ventilation and pad out gassing offered by the slots offers the best of both worlds.
When you look through the wheel of a vehicle and you see the aggressive cross drilled slotted pattern, you know that driver is serious about performance! STILLEN's cross drilled and slotted rotors are engineered to bolt directly to your factory braking system and require no modifications. The average driver will not notice any excess wear or decrease in durability over a cross drilled or slotted rotor.
Features of STILLEN Cross Drilled & Slotted Rotors:
- Combines the benefits of cross-drilling and slotting for the best of both worlds.
- Fewer holes mean longer pad life with little penalty in the way of initial pad bite.
- Additional leading edges offer improved brake pad grip.
- Under hard use, cross drilled holes provide better cooling.
- Holes are radius-chamfered with special tooling, minimizing stress-risers for maximum resistance to heat and longer rotor life compared to lower-priced cross drilled and slotted rotor offerings.
- CAD software is used to design and test the optimum face pattern for full pad sweep, reduced hot spots and minimal grooving.
- Rotors arrive finished, machine-balanced and ready to install!
- If you're into high performance driving or push your vehicle's limits on the track, then a cross drilled and slotted rotor is for you. If you drive in a mountainous environment where hard braking is the norm, a cross drilled and slotted rotor is for you as well. The everyday driver who is serious about the styling of their vehicle and enjoys maximum braking performance will be more than satisfied with a cross drilled and slotted rotor.
For optimum braking performance, we recommend pairing your new Cross Drilled and Slotted Rotors with a set of high performance brake pads and steel brake lines.
|,|"Application" "Mazda Miata 2006-2007|-||-|"Special Handling fee" "add(+$15)"|-||-|||-||STILLEN-MAZDA-MIATA-REAR-CROSS-DRILLED-1-PIECE-SPORT-ROTORS-1990-1993|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda Miata Stillen Rear Cross Drilled 1-Piece Sport Rotors 1990-1993|,|MAZ2001|,|144.39|,|129.95|,||,||,||,||,||,||,|Stillen Mazda Miata Rear Cross Drilled 1-Piece Sport Rotors 1990-1993
STILLEN One-piece Sport Rotors are a great choice for performance, durability and style when staying with OE factory calipers. These high-performance upgrades directly replace those plain OE factory rotors with no modification required. Applications for cars are finished with a tough clear zinc plating for exceptional corrosion resistance and to avoid the pad contamination and environmental issues with cadmium plating. Most truck and SUV applications have a tough, black e-coat to keep the elements at bay.
Why cross-drilled or slotted (or both)?
Cross-drilled rotors are a quick and simple way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder when it's time to stop NOW! Tests have shown (and drivers can feel) the immediate improvement. The holes also provide better cooling under hard use. Pad wear may be accelerated slightly (depending on driving technique), so only high quality brake pads should be considered. Cross-drilled rotors are not recommended for serious track duty - choose Slotted or Hook Slot rotors (when available) instead for elevated temperature use.
But I've read that cross-drilled rotors are prone to...
While there is often some strand of truth in the various tales circulating around the Internet, we have found that many issues related to premature cracking or irregular pad wear are due to rotors made of inferior materials, substandard manufacturing techniques, poor pattern design or improper use. With over two decades of experience in high-performance brake upgrades, STILLEN has proven that high-quality, well-made cross-drilled rotors are a worthy upgrade for high-performance driving duty short of serious track days.
What makes STILLEN Sport Rotors different?
High-quality, 1-piece blanks are sourced from the world's best foundries. Each application is carefully scrutinized for the optimum face pattern, whether cross-drilled, slotted, cross-drilled and Slotted or Hook Slot. The latest CAD (Computer-Aided Design) tools are used to optimize the face pattern for full pad sweep to reduce hot spots and grooving.
All cross-drilled holes are radius-chamfered with special tooling to minimize stress-raisers for maximum resistance to heat and longer rotor life compared to lower-priced offerings. Slots are ramped to reduce pad dust retention and noise. STILLEN Sport Rotors arrive finished, machine-balanced and ready to install!
I spent a lot on custom wheels. What will these rotors look like months from now?
Sport Rotors for most car applications are zinc plated for corrosion resistance, which keeps them looking good and rust-free in most environments. Truck/SUV applications are typically black E-coated for a tough, rust-resistant appearance.
OK, I'm ready to upgrade. What next?
Enhance a new set of Sport Rotors with STILLEN Metal Matrix brake pads or choose from other performance pad options. For the complete package, choose stainless steel braided brake lines and fresh AP Racing brake fluid for a more positive brake pedal feel and resistance to fluid boiling. Remember, car manufacturers recommend a brake system flush at no longer than 24 month intervals, shorter for hard brake use. If it has been too long, upgrading brake lines at the same time will save time and labor.
|,|"Special Handling fee" add((+$10)"|-||-|||-||STILLEN-MAZDA-MIATA-REAR-CROSS-DRILLED-1-PIECE-SPORT-ROTORS-2001-2005|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Stillen Rear Cross Drilled 1-Piece Sport Rotors 2001-2005|,|MAZ2201|,|188.40|,|169.56|,||,||,||,||,||,||,|Stillen Mazda Miata Rear Cross Drilled 1-Piece Sport Rotors 2001-2005
STILLEN One-piece Sport Rotors are a great choice for performance, durability and style when staying with OE factory calipers. These high-performance upgrades directly replace those plain OE factory rotors with no modification required. Applications for cars are finished with a tough clear zinc plating for exceptional corrosion resistance and to avoid the pad contamination and environmental issues with cadmium plating. Most truck and SUV applications have a tough, black e-coat to keep the elements at bay.
WHY CROSS-DRILLED OR SLOTTED (OR BOTH)?
Cross-drilled rotors are a quick and simple way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder when it's time to stop NOW! Tests have shown (and drivers can feel) the immediate improvement. The holes also provide better cooling under hard use. Pad wear may be accelerated slightly (depending on driving technique), so only high quality brake pads should be considered. Cross-drilled rotors are not recommended for serious track duty - choose Slotted or Hook Slot rotors (when available) instead for elevated temperature use.
BUT I'VE READ THAT CROSS-DRILLED ROTORS ARE PRONE TO...
While there is often some strand of truth in the various tales circulating around the Internet, we have found that many issues related to premature cracking or irregular pad wear are due to rotors made of inferior materials, substandard manufacturing techniques, poor pattern design or improper use. With over two decades of experience in high-performance brake upgrades, STILLEN has proven that high-quality, well-made cross-drilled rotors are a worthy upgrade for high-performance driving duty short of serious track days.
WHAT MAKES STILLEN SPORT ROTORS DIFFERENT?
High-quality, 1-piece blanks are sourced from the world's best foundries. Each application is carefully scrutinized for the optimum face pattern, whether cross-drilled, slotted, cross-drilled and Slotted or Hook Slot. The latest CAD (Computer-Aided Design) tools are used to optimize the face pattern for full pad sweep to reduce hot spots and grooving.
All cross-drilled holes are radius-chamfered with special tooling to minimize stress-raisers for maximum resistance to heat and longer rotor life compared to lower-priced offerings. Slots are ramped to reduce pad dust retention and noise. STILLEN Sport Rotors arrive finished, machine-balanced and ready to install!
I SPENT A LOT ON CUSTOM WHEELS. WHAT WILL THESE ROTORS LOOK LIKE MONTHS FROM NOW?
Sport Rotors for most car applications are zinc plated for corrosion resistance, which keeps them looking good and rust-free in most environments. Truck/SUV applications are typically black E-coated for a tough, rust-resistant appearance.
OK, I'M READY TO UPGRADE. WHAT NEXT?
Enhance a new set of Sport Rotors with STILLEN Metal Matrix brake pads or choose from other performance pad options. For the complete package, choose stainless steel braided brake lines and fresh AP Racing brake fluid for a more positive brake pedal feel and resistance to fluid boiling. Remember, car manufacturers recommend a brake system flush at no longer than 24 month intervals, shorter for hard brake use. If it has been too long, upgrading brake lines at the same time will save time and labor.
|,|"Application" "Mazda Miata 2001-2005"|-||-|||-||STILLEN-MAZDA-MIATA-REAR-CROSS-DRILLED-1-PIECE-SPORT-ROTORS-2006-2007|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Stillen Rear Cross Drilled 1-Piece Sport Rotors 2006-2007|,|MAZ3401|,|185.75|,|159.18|,||,||,||,||,||,||,|Stillen Mazda Miata Rear Cross Drilled 1-Piece Sport Rotors 2006-2007
STILLEN One-piece Sport Rotors are a great choice for performance, durability and style when staying with OE factory calipers. These high-performance upgrades directly replace those plain OE factory rotors with no modification required. Applications for cars are finished with a tough clear zinc plating for exceptional corrosion resistance and to avoid the pad contamination and environmental issues with cadmium plating. Most truck and SUV applications have a tough, black e-coat to keep the elements at bay.
WHY CROSS-DRILLED OR SLOTTED (OR BOTH)?
Cross-drilled rotors are a quick and simple way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder when it's time to stop NOW! Tests have shown (and drivers can feel) the immediate improvement. The holes also provide better cooling under hard use. Pad wear may be accelerated slightly (depending on driving technique), so only high quality brake pads should be considered. Cross-drilled rotors are not recommended for serious track duty - choose Slotted or Hook Slot rotors (when available) instead for elevated temperature use.
BUT I'VE READ THAT CROSS-DRILLED ROTORS ARE PRONE TO...
While there is often some strand of truth in the various tales circulating around the Internet, we have found that many issues related to premature cracking or irregular pad wear are due to rotors made of inferior materials, substandard manufacturing techniques, poor pattern design or improper use. With over two decades of experience in high-performance brake upgrades, STILLEN has proven that high-quality, well-made cross-drilled rotors are a worthy upgrade for high-performance driving duty short of serious track days.
WHAT MAKES STILLEN SPORT ROTORS DIFFERENT?
High-quality, 1-piece blanks are sourced from the world's best foundries. Each application is carefully scrutinized for the optimum face pattern, whether cross-drilled, slotted, cross-drilled and Slotted or Hook Slot. The latest CAD (Computer-Aided Design) tools are used to optimize the face pattern for full pad sweep to reduce hot spots and grooving.
All cross-drilled holes are radius-chamfered with special tooling to minimize stress-raisers for maximum resistance to heat and longer rotor life compared to lower-priced offerings. Slots are ramped to reduce pad dust retention and noise. STILLEN Sport Rotors arrive finished, machine-balanced and ready to install!
I SPENT A LOT ON CUSTOM WHEELS. WHAT WILL THESE ROTORS LOOK LIKE MONTHS FROM NOW?
Sport Rotors for most car applications are zinc plated for corrosion resistance, which keeps them looking good and rust-free in most environments. Truck/SUV applications are typically black E-coated for a tough, rust-resistant appearance.
OK, I'M READY TO UPGRADE. WHAT NEXT?
Enhance a new set of Sport Rotors with STILLEN Metal Matrix brake pads or choose from other performance pad options. For the complete package, choose stainless steel braided brake lines and fresh AP Racing brake fluid for a more positive brake pedal feel and resistance to fluid boiling. Remember, car manufacturers recommend a brake system flush at no longer than 24 month intervals, shorter for hard brake use. If it has been too long, upgrading brake lines at the same time will save time and labor.
|,|"Application" "Mazda Miata 2006-2007"|-||-|"Special Handling fee" "add(+$15)"|-||-|||-||STILLEN-MAZDA-MIATA-REAR-SLOTTED-1-PIECE-SPORT-ROTORS-2006-2007|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata Stillen Rear Slotted 1-Piece Sport Rotors 2006-2007|,|MAZ3401S|,|188.35|,|169.05|,||,||,||,||,||,||,|Stillen Mazda Miata Rear Slotted 1-Piece Sport Rotors 2006-2007
Slotted brake rotors are a great upgrade for any car and will improve your vehicles braking performance immensely. The slotted rotors allow a channel for the brake pad gases to escape and allow the rotor to have a more direct friction surface to the brake pad. Many people prefer slotted rotors as they are more durable and resilient than other performance rotor solutions.
As with all STILLEN brake rotors, you can be rest assured that these slotted rotors are a direct replacement for your factory rotors and will fit perfectly with your factory brake calipers!
Slotted rotors provide much of the increased pad bite that cross-drilled rotors do, but can handle the heat of more aggressive use. The slots act as a wiper, cleaning the pad face as they go by to reduce pad glazing, keeping the pads fresh for optimal performance.
Since slotted rotors do not have holes piercing all the way through the brake rotor, they are much stronger than a cross drilled rotor or a cross drilled and slotted rotor. With performance driving, the demand on your brake rotors increases substantially from everyday driving. Slotted rotors can typically take more abuse than cross drilled rotors. When pushed to the limit, slotted rotors are able to expand and contract with temperature change evenly around the entire rotor. Drive with confidence knowing you have one of the best slotted brake rotors on the market today!
Features of STILLEN Slotted Rotors:
- Increased pad bite, without fear of stress-risers possible with cross-drilled rotors under aggressive driving with elevated temperature use.
- Slotted rotors act as a wiper, cleaning the pad face as they go by which can reduce pad glazing, keeping the pads fresh for optimal performance.
- Great choice for track days or where spirited driving is the norm.
- Less chance of cracking over a cross drilled rotor
- Manufactured with the latest CNC equipment.
- Slotted rotors arrive finished, machine-balanced and ready to install!
Slotted Rotor Corrosion Protection
At STILLEN, we finish the slotted rotors with durable clear zinc plating. This barrier prevents corrosion on non-friction surface areas and keeps the slotted rotors looking great and guaranteeing a long service life! Most of our truck applications are finished with a great looking black e-coat finish. This really stands out and the slotted rotors look VERY cool inside any wheel.
STILLEN only offers high quality brake components for your vehicle. Along with our high performance slotted rotors, STILLEN provides big brake kits, steel brake lines, and performance brake pads.
|,|"Application" "Mazda Miata 2006-2007"|-||-|"Special Handling fee" "add(+$15)"|-||-|||-||STREET-ADVANCE-Z-COILOVER-KIT-BY-TEIN|,|19MAMISUANDS|,|Mazda Miata Street Advance-Z Coilover Kit by Tein 1990-2005|,|teinGSM64-9USS2|,|1,045.00|,|826.02|,||,||,||,||,||,||,|Mazda Miata Street Advance-Z Coilover Kit by Tein - Set of 4 (1990-2005)
Tein's coilover family of products offers you a variety of options in both adjustability and pricing. The Street Advance coilovers are great for daily and spirited driving, and are designed to provide a sporty ride feel and aggressive stance along with damping force adjustment. The shortened shell case provides optimum damper stroke at lower than standard ride height.
Features:
Steel construction
Twin tube internal construction
Ride height adjustable via spring seat
16-way damping adjustment
Advance-Z struts are not rebuildable
Kit Includes:
4 x Shock absorbers
4 x Springs (Rates: Front 392 lbs/in, Rear 336 lbs/in)
4 x Seat locks, 4 x Spring seats, 4 x thrust washers
4 x Bump rubbers and 4 x Dust covers
2 x Hook spanners and an Instruction manual
|,|"Shipping cost" "add(+$95)"|-||-|||-||GSM64-8USS2|,|SHOP-BY-SALE|,|Mazda Miata Street Basis Z Coilover Kit by Tein 1990-2005|,|GSM64-8USS2|,|849.00|,|730.02|,||,||,||,||,||,||,|Mazda Miata Street Basis Z Coilover Kit by Tein 1990-2005
TEIN Street Basis Z Coilovers Mazda Miata NA/NB (1990-2005) GSM64-8USS2
Spring Rates: 392 lb front / 336 lb rear - Requires re-use of OEM upper mounts
1990-1998 Miata - Max Lowering: 3" Front - 2.8" Rear
1999-2005 Miata - Max Lowering: 3.9" Front - 3.7" Rear
TEIN Street Basis Z coilovers are the latest in the TEIN coilover lineup. TEIN has simplified their manufacturing process and were able to signficantly reduce prices on their popular coilovers without sacrificing quality and craftsmanship.
STREET BASIS Z is strictly a ride height adjustable kit. This makes it a perfect setup for the daily driver looking for an increase in handling performance without compromising comfort for everyday use. For many of you considering a lowering spring + performance shock absorber combination, the STREET BASIS Z makes even more sense as we select appropriate spring rates and valve our dampers to match. No guesswork on the end-users part in trying to match one brand of springs to another brand of shock absorbers. The added height adjustment feature allows the end-user the ability to adjust ride height to their preference, something that lowering springs lack. Being that most vehicles are slightly unbalanced from left to right sides, that means you can easily adjust the ride height so that each corner is even from their opposing sides.
TEIN coilovers are built from TEIN's direct knowledge of suspension products due to their extensive racing history. TEIN Street Basis Z Coilovers are TEIN's entry level coilover that gives you all of the benefits of a high quality height adjustable coilover at an entry level price.
The TEIN Street Basis Z coilover is designed to provide the feeling of a sports suspension with an aggressive stance. Developed to have a shortened shell case that provides optimum damper stroke at a low vehicle height allowing your car to have a good ride even when low. Ride height is adjutable via the TEIN ZT coated threaded sleeve.
Made in Japan.
Steel Construction
No Sag Springs
Twin Tube Internal Design
Powder Coated Damper Body
Non-welded ZT coated Adjustment Tube
Full Length Dust Boots (some models re-use OEM dust boots)
1-piece Aluminum Spring Seat with Delrin Thrust Washer
Your purchase includes:
4 TEIN Coilover Shocks
4 TEIN Coilover Springs (no sag version)
4 Rubber Bump Stops
2 Hook Spanners
4 Spring Seats
4 Spring Locks
4 Dust Covers (some kits reuse stock dust covers)
4 Delrin Thrust Washers
1 TEIN Sticker Sheet
1 Instruction Manual
|,|"Shipping cost" "add(+$95)"|-||-|||-||MAMISTBABYCO|,|NBINSTBA|,|Mazda Miata Style Bar 1990-2005 - Sale!|,|CBT-903-305|,|209.99|,|179.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Style Bar 1990-2005
This new Style Bar by Cobalt is manufactured so that no cutting of your interior body panels is required! Additionally, seat travel and recline are not impeded in any way. Available in your choice of Chrome or Black Powdercoat. Easily installs in about 30 minutes with simple hand tools. Instructions included.
*NOTE: These Style Bars are decorative items only and not intended for roll over protection. Do not work with 99-05 factory wind blocker. On 94-97 Miatas the factory seat tower brace must be removed
|,|"Select Color" "Select Here" "Black Powdercoat" "Chrome add(+$10)"|-||-|"Do You Want The Wind Blocker for Style Bar?" "Select Here" "Yes add(+$88.95)"|-||-|||-||MAZDA-MIATA-SUPER-STYLE-WING-NO-LIGHT-FIBERGLASS-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata Super Style Wing No Light Fiberglass 1990-1997|,|591401|,|535.00|,|393.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Super Style Wing No Light Fiberglass 1990-1997
1990-1997 Mazda Miata Super Style Wing No Light Fiberglass. Manufactured by Wings West, a pioneer in polyurethane bodykit manufacturing and design. Parts with part numbers that begin with the prefix 89 are made out of durable, flexible polyurethane. While parts with part numbers that begin with the prefix 59 or 49 are made out of multi-layer fiberglass. Wings West parts are made in USA. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description.
Intended fro OFF ROAD use only.
|,|"Freight Cost" "add(+$195)"|-||-|||-||MAMISUWHPL90|,|NAEXLI|,|Mazda Miata Super White Platinum 9005 twin pack by PIAA|,|PIAA-19605|,|89.00|,|64.00|,||,||,|0.000 |,||,||,||,|Miata Piaa Extreme White 9005 Headlight Bulbs. When it comes to high-quality halogen light bulbs, there is no one close to Piaa corporation. For nearly a half-century, quality has begun with the design and finished with the highest-grade materials available. Piaa scientifically engineers bulbs to exacting specifications, utilizing the latest in integrated computer aided technology. Each Piaa replacement light bulb is 100% tested at each step in the manufacturing process.
Sold as a pair.
• High quality heat resistant glass tube
• Welded focus ring that assures proper positioning
• Provides brighter light from less amps
• A one piece filament support allows proper support and
positioning
• A metal bond holds the glass tube securely, preventing cracks and leaks
This Product Carries a FULL Manufacturers Warranty
|,|||-||113780-113782|,|SHOP-BY-SALE|,|Mazda Miata Super20 Carbon Creations Fender Flares 2006-2015|,|113780-113782|,|995.00|,|795.00|,||,||,||,||,||,||,|Mazda Miata Super20 Carbon Creations Fender Flares 2006-2015
2x2 twill weave carbon fiber
Premium gloss, UV protectant finish
Track-proven strength and performance
Up to 70% lighter than OEM factory parts
Weather-resistant aluminum mesh grille (where applicable)
**Material : Carbon Fiber
**Brand : Carbon Creations
|,|||-||MAZDA-MIATA-SUPERTECH-SPRING---RETAINER-KIT-1990-1993S|,|19MAMISUANDS|,|Mazda Miata Supertech Spring / Retainer Kit 1990-1993|,|mazda-miata-supertech-spring-retainer-kit-1990-1993|,|586.30|,|469.04|,||,||,||,||,||,||,|Mazda Miata Supertech Spring / Retainer Kit 1990-1993
Length: 9 inches
Width: 7 inches
Height: 3 inches
Weight: 2.6 lbs
Seat Pressure: 70lbs @ 33.50mm
|,|||-||20MAMISUANDS3|,||,|MAZDA MIATA SUSPENSION AND STEERING SHOCKS, SPRINGS, COIL OVERS, AND CAMBER KITS 2006-2015|,||,||,||,||,||,||,||,||,||,|
|,|||-||61-1795|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Sway Bar Endlinks - Front/Rear 2006-2019|,|61-1795-1795ND|,|65.99|,|47.99|,||,||,||,||,||,||,|Mazda Miata Sway Bar Endlinks - Front/Rear 2006-2019
Stronger endlinks are a MUST when you change to a stiffer sway bar and when you lower your MX5 you want adjustable endlinks for correct geometry (bar ends level). Good-Win Racing Sway Bar End Links include TWO center studs so that this one endlink has the widest range of adjustment of any endlink on the market. These can be adjusted from the same length as stock down to much shorter for lowered cars. This also means that this same endlink works for both the front and rear sway bars. The ball-joint style link end is housed in a CNC-machined aluminum housing, offering silent, smooth operation combined with excellent durability and performance.
Sold INDIVIDUALLY. You want TWO of these per sway bar so be sure to order two if you want two!
Stock endlink length (Front): 100mm
Stock endlink length (Rear): 84mm
GWR endlink adjustable range: 115mm (max. length with long stud) to 78mm (min. length with short stud)
* 78mm length is 5mm shorter than even the Racing Beat rear endlinks.
- Fits 2006-2015 MX-5 and 2004-2012 RX-8.
- Direct replacements for the stock end links.
- Can be used on both standard height and lowered vehicles.
- Can be easily installed using only simple hand tools.
- Comes complete with securing hardware.
INSTALLATION:
Endlinks ship un-assembled so that you can assemble using the correct center stud length for your needs. Jam nuts on the center stud take a 14mm wrench.
To tighten the lock nuts on the studs on both ball joint ends you insert a 5mm allen key in to the end of the stud to hold it in place and then use a 17mm open-ended wrench to tighten the lock nut down while holding the stud stationary with the allen key.
Sold INDIVIDUALLY
|,|"Select Year" "Select Here" "2006-2015" "2016-2019 Front"|-||-|||-||EIB5515-320|,|19MAMISUANDS2|,|Mazda Miata Sway Bar Kit by Eibach 1994-1997|,|eib5515-320|,|630.95|,|525.00|,||,||,||,||,||,||,|Mazda Miata Sway Bar Kit by Eibach 1994-1997
Complete your suspension upgrade with an Eibach Anti-Roll-Kit. While our Pro-Kit and Sportline spring sets are regarded as the primary suspension enhancement components, the Eibach Anti-Roll-Kit allows critical fine-tuning of your car´s handling characteristics.
Our Anti-Roll-Kit reduce body roll through increased design stiffness over stock bars. The result: increased handling and cornering grip in any performance-driving situation.
Manufactured from cold-formed, high-strength aircraft-grade steel for precision performance, and finished with a long-lasting red powder coat finish, the Anti-Roll-Kit comes complete with all necessary mounting hardware and instructions for easy installation.
*Features*
* Performance Tuned Handling
* Further Reduce Body Roll
* Precision Engineered for Pro-Kit & Sportline
* Part of the Eibach Pro-System-Plus & Sport-System-Plus
* Million Mile Warranty
|,|||-||MXMITRDOGRA11|,|19MAMIENPESU|,|Mazda Miata TDR Intercooler System for 94-97 Miata with the JRSC M45 Supercharger|,|TDR-94M45|,|1,400.00|,|1,149.00|,||,||,|0.000 |,||,||,||,|Mazda Miata TDR Intercooler System for 94-97 Miata with the JRSC M45 Supercharger
Mazda Miata TDR Intercooler System for 94-97 Miata with the JRSC M45 Supercharger Includes FMIC, pipes mounting hardware and detailed instructions.
The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our dual hood struts at 25% Off the retail price at the time of purchase!
*Please Note: The Koyo radiators on the 90-97 models are 3/4" taller than the stock radiator causing clearance issues with the intake pipe. There are no clearance issues with the stock radiator and PWR radiator.
|,|"Add Hood Lift Kit" "No" "Yes add(+$99)"|-||-|"Shipping and Handling" "add(+$119)"|-||-|||-||MAZDA-MIATA-TEIN-S-TECH-SPRINGS-1990-1997|,|19MAMISUANDS|,|Mazda Miata Tein S-Tech Springs 1990-1997|,|TEIN-SKM64-AUB00|,|350.00|,|249.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Tein S-Tech Springs 1990-1997
TEIN STech Mazda Miata Lowering Springs (1990-1997) SKM64-AUB00
Notes: STech Springs
Manufacturer: TEIN
Ride Height (R): -0.7in (-19mm)
Ride Height (F): -1.1in (-29mm)
Spring Rate (R): 168lbs/in (3kgf/mm)
Spring Rate (F): 235lbs/in (4.2kgf/mm)
This drop is carefully calculated by TEIN to ensure the TEIN STech's lower your car so the car maintains about the same wheel gap front and rear.
TEIN STech Lowering Springs are designed to lower your car to an aggressive stance that is not too low but clears most of the wheel gap. The TEIN STech is also designed to retain comfort and give you a smooth ride for daily driving duties. TEIN STech Lowering Springs feature a progressive spring rate, and on certain models comes with a special silencer to get rid of any spring creak.
1 Year warranty from TEIN on manufacture defects. Unlike other springs, TEIN's warranty also covers sag more than 5mm, so you can be sure that the car won't "settle" like with other springs.
Comes with 4 springs for each corner, and TEIN stickers.
These are Genuine Tein Springs, not fakes or copies like sold on some other sites.
|,|||-||MAZDA-MIATA-TEIN-S-TECH-SPRINGS-1999-2005|,|19MAMISUANDS6|,|Mazda Miata Tein S-Tech Springs 1999-2005|,|TEIN-SKM44-AUB00|,|325.00|,|209.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Tein S-Tech Springs 1999-2005
Mazda Miata Tein S-Tech Springs 1999-2005 SKM44-AUB00
Notes: STech Springs
Manufacturer: TEIN
Ride Height (F): -0.9in (-22mm)
Ride Height (R): -1.2in (-30mm)
Spring Rate (R): 173lbs/in (3.1kgf/mm)
Spring Rate (F): 235lbs/in (4.2kgf/mm)
This drop is carefully calculated by TEIN to ensure the TEIN STech's lower your car so the car maintains about the same wheel gap front and rear.
TEIN STech Lowering Springs are designed to lower your car to an aggressive stance that is not too low but clears most of the wheel gap. The TEIN STech is also designed to retain comfort and give you a smooth ride for daily driving duties. TEIN STech Lowering Springs feature a progressive spring rate, and on certain models comes with a special silencer to get rid of any spring creak.
1 Year warranty from TEIN on manufacture defects. Unlike other springs, TEIN's warranty also covers sag more than 5mm, so you can be sure that the car won't "settle" like with other springs.
Comes with 4 springs for each corner, and TEIN stickers.
These are Genuine Tein Springs, not fakes or copies like sold on some other sites.
|,|||-||MAZDA-MIATA-TEIN-S-TECH-SPRINGS-2006-2014|,|TEIN-HIGH-PERFORMANCE-SUSPENSION|,|Mazda Miata Tein S-Tech Springs 2006-2014|,|TEIN-SKM74-AUB00|,|320.00|,|243.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Tein S-Tech Springs 2006-2014
FEATURES
* Get aggressive handling and style with TEIN S.Tech Lowering Springs
* Custom tuned for your specific year, make and model street machine
* Drops your ride by 1.5 sporty inches (depends on vehicle)
* Lower center of gravity improves vehicle handling
* Progressive spring rate maintains top-notch ride quality
* Crafted from chrome vanadium spring steel
* Designed to be used with OEM or aftermarket shocks and dampers
* Extensive road testing ensures the proper balance between performance and comfort
* Includes 4 coil springs
* Fitted with silencer rubber (depends on model)
* Finished with a rust-resistant racy green dual-stage powder coat
* Your TEIN S.Tech Lowering Springs are backed by a 1-year warranty
DESCRIPTION
Stop, drop and roll—the show, your ride and your style that is—with a set of TEIN S.Tech Lowering Springs on all four corners. Custom tuned for your specific year, make and model vehicle, these lowering springs deliver around a 1.5" drop for enhanced road hugging action and a race-ready look.
TEIN Springs are designed to lower your vehicle's center of gravity, greatly reducing acceleration squat, cornering body roll and braking nose dive. Once installed, your street machine's suspension instantly goes from a mushy mess to a corner-hugging race set up.
Since the “S" in S.Tech stands for Style, TEIN coats these lowering coil springs with a racy green finish. On top of stylish, the patented dual-stage powder coating system delivers maximum rust resistance for years of use. And, for an even drop on both the front and rear, your kit includes a set of 4 springs. What's more, TEIN backs your S.Tech Lowering Springs with a 1-year limited warranty.
|,|||-||MAZDA-MIATA-TEIN-STREET-ADVANCE-COILOVER-1990-2005|,|19MAMISUANDS|,|Mazda Miata Tein Street Advance Coilover 1990-2005|,|TEIN-GSM64-9USS2|,|1,040.00|,|826.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Tein Street Advance Coilover 1990-2005
The Street Advance damper is the evolution of the popular Super Street coilover. Developed to provide a sporty ride feeling and aggressive stance, along with wide-range damping force adjustment using our new Advance Needle technology, giving the driver a much more noticeable feel in damping force change. The shortened shell case design provides optimum damper stroke at lower than standard vehicle ride height. Vehicle ride height is adjustable via the ZT coated threaded sleeve. Updated internal components and external coatings increase durability and product life. Street Advance dampers are great for daily driving and spirited driving for all types of drivers.
Made in Japan under strict quality control standards and developed by highly trained suspension engineers.
Additional Features
Steel Construction
Twin Tube internal construction
Larger piston diameter for strut type front and rear (22mm)
16-way Damping adjustment with over 200% increase in damping force change.*
Ride Height adjustable via spring seat
Powder coated damper body
Non-welded ZT coated Adjustment Tube
Full-Length Dust Boots
1-piece Aluminum Spring Seat with Delrin Thrust Washer
Available for Overhaul
1-year Manufacturers Defect Warranty *over comparable Super Street damper, based on damping dyno graph data. Increase in damping force over comparable Super Street damper may vary for specific vehicle applications.
Additional Features
* Steel Construction
* Twin Tube internal construction
* Larger piston diameter for strut type front and rear (22mm)
* 16-way Damping adjustment with over 200% increase in damping force change.+
* Ride Height adjustable via spring seat
* Powder coated damper body
* Non-welded ZT coated Adjustment Tube
* Full-Length Dust Boots
* 1-piece Aluminum Spring Seat with Delrin Thrust Washer
* Available for Overhaul
* 1-year Manufacturers Defect Warranty
+ Over comparable Super Street damper, based on damping dyno graph data. Increase in damping force over comparable Super Street damper may vary for specific vehicle applications.
|,|"Shipping cost" "add(+$95)"|-||-|||-||MAZDA-MIATA-TEIN-STREET-BASIS-COILOVER-1990-2005|,|19MAMISUANDS|,|Mazda Miata Tein Street Basis Coilover 1990-2005|,|TEIN-GSM64-1USS2|,|820.00|,|719.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Tein Street Basis Coilover 1990-2005
The Street Basis damper is the evolution of the popular BASIC coilover. Developed to provide a sporty ride feeling and aggressive stance. The shortened shell case design provides optimum damper stroke at lower than standard vehicle ride height. Vehicle ride height is adjustable via the ZT coated threaded sleeve. Updated internal components and external coatings increase durability and product life. Street Basis dampers are great for daily driving and spirited driving for all types of drivers.
Made in Japan under strict quality control standards and developed by highly trained suspension engineers.
FEATURES:
* Steel Construction
* Twin Tube internal construction
* Ride height adjustable via springs seats
* Powder coated brackets with teflon coated shock body for heavy duty rust prevention
* 1 year manufactures defect warranty
* Rebuildable
|,|"Shipping cost" "add(+$95)"|-||-|||-||MAZDA-MIATA-TEIN-STREET-FLEX-COILOVER-1990-2005|,|19MAMISUANDS|,|Mazda Miata Tein Street Flex Coilover 1990-2005|,|TEIN-GSM40-51SS1|,|1,750.00|,|1,549.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Tein Street Flex Coilover 1990-2005
These coilovers are full length adjustable. You can keep your preload settings the same at any height. Also you can adjust the stiffness and softness of the shock. This is perfect for someone who is more interested in the performance of their car. Adjustability lets you go from street to race driving in seconds. You can add a EDFC System and electronically control your shock's settings inside the cabin. Active EDFC can change your car's specs ON THE FLY AS YOU DRIVE AUTOMATICALLY! This is almost cheating! Add the GPS unit and you have your suspension tune itself as you drive.
Tein Description:
The Street Flex damper is the evolution of our popular Type Flex coilover. Developed to provide the ultimate balance of comfort and performance for both street driving and circuit use, along with wide-range damping force adjustment using our new Advance Needle technology and new damper valving specs, giving the driver a much more noticeable feel in damping force change and controllability. The shortened shell case design provides optimum damper stroke at lower than standard vehicle ride height. Full-length adjustability offers separate spring preload and ride height adjustment. Updated internal components and external coatings increase durability and product life. Includes Pillowball Upper Mounts (camber adjustable for strut type applications) and is compatible with the EDFC and EDFC Active systems.
• Steel Construction
• Twin Tube Internal Construction
• Full-Length Adjustable via Threaded Body and Spring Seat/Seat Locks
• 16-Way Damping Adjustable (simultaneous compression and rebound)
• New Damper Valving Specifications for Improved Street Comfort
• Incorporated Advance Needle Design (nearly 200% improvement over predecessor)
• Pillowball Upper Mounts for increased steering feedback
• Camber Adjustable for Strut Type Front Suspensions
• Larger Piston Diameter (22mm O.D.) for Strut Type
• EDFC (Electronic Damping Force Controller)/EDFC Active Compatible
• Powdercoated Brackets and ZT Coated Shellcase for Outstanding Rust Prevention
• One Year Warranty Against Manufacturer's Defects
Contents of damper kit
4x Adjustable shock absorber
4x Steel / bearing upper mounts
4x Main spring
4x Lower spring seat
12x Spring Seat lock
4x Bump rubber
4x Dust cover, boot
2x Hook spanner
Instruction manual
|,|"Shipping cost" "add(+$95)"|-||-|||-||TEINVSM74-C1SS3|,|NEW|,|Mazda Miata Tein Street Flex Coilover 2006-2021|,|teinVSM74-C1SS3|,|1,450.00|,|1,050.95|,||,||,||,||,||,||,|Mazda Miata Tein Street Flex Coilover 2006-2019+
Part Number: 2006-2015 teinVSM74-C1SS3
2016-2018 teinVSMD0-CUSS3
*Incredibly Low Price & Made in Yokohama!*
FLEX Z inherits all the features and quality of STREET FLEX but the adoption of new platform allows its price to be set at amazingly low range ($800 to $1,050). FLEX Z, of course, maintains the long-favored "Made in Yokohama" quality. Ride height adjustable shock absorber, fully loaded with TEIN's comprehensive technology, is now more affordable prices than ever. Sealed Structure
Sealed Structure
*New Approach to Achieve Amazingly Low Prices*
After careful consideration, we came to the conclusion that we need to establish new manufacturing systems and to develop a new product platform, in order to achieve low prices the customers demand. Until now, all TEIN dampers can be disassembled for overhaul; Now, we introduce our new "Sealed Structure" for the FLEX Z. Below is a brief description of this new production process for our FLEX Z at TEIN HQ Factory in Yokohama, Japan.
Top end of shell pipe is drawn, oil & gas are injected then the opening is completely sealed by crimping process. This "Sealed Structure" process also reduces the production time, compared to the production of existing disassembable dampers.
In addition, pursuit of efficient production system, such as use of seam welding, allows us to drastically reduce the production cost.
*Twin-Tube System for Comfortable Ride on Streets!*
Considering the use of larger tires/wheels and the lowered ride height, FLEX Z uses twin-tube system, in pursuit of ride comfort on streets.
In order to maintain the ride quality on streets with rough spots here and there, a shock absorber has to have sufficient stroke, be low-frictional and move smoothly.
As an oil chamber and a gas chamber are not arranged serially in a twin-tube system, it is easy to secure enough stroke. Also, low gas pressure keeps friction low.
Its smooth stroke movement makes it possible to follow rough and bumpy road surfaces quite well, offering supple ride at low speed and stable ride at high speed.
*Full-Length System for Ride Height Adjustment w/ Minimal Change in Ride!*
Full-length ride height adjustment system, used for FLEX Z, enables adjustment of ride height by adjusting the case length, without changing the damper stroke length and/or spring pre-load. This has the advantage that the change in ride quality is kept minimal when the height is adjusted.
This system not only makes it possible to maintain good balance between the low-down appearance and ride comfort, but also provides more setting choices for sport driving as well.
*Damping Force Adjustable to Change Ride to Desired Settings!*
FLEX Z has ever-popular 16-level damping force adjustment (comp./rebound together) feature with the use of needle valve. By turning the adjustment knob, damping force (stiffness) is adjusted linearly step by step, to change the ride and handling of the car to suit driver's needs/preferences.
Use of well-reputed "ADVANCE Needle" at the needle valve for oil flow control secures sufficient damping force adjustable range.
Whether it's for the handling characteristics of sport driving or for the ride quality according to numbers of passengers, finding the most desirable setting is easier than ever.
*Compatible with EDFC Series to enable In-Car Damping Force Adjustment!*
With EDFC (Electronic Damping Force Controller) series installed, damping force can be controlled from the cockpit with ease. Stepping motors attached in place of adjustment knobs control the damping force quickly and accurately.
Use of EDFC turns 16-level adjustment into finer 32-level or 64-level adjustment mode (64-level only available with EDFC ACTIVE / EDFC ACTIVE PRO), to provide the optimum performance by fully utilizing the damping force adjustable range drastically widened by the use of "ADVANCE Needle".
With EDFC ACTIVE / EDFC ACTIVE PRO, damping force can be controlled automatically according to changes in G-force and/or vehicle speed, to offer very smooth and slick ride like never before. (Some models are NOT compatible with EDFC series.)
*Upper Mounts Included for Easy Installation!*
FLEX Z kit includes upper mounts exclusively designed for each vehicle model; either reinforced rubber mounts or pillow ball mounts.
Pillow ball upper mounts for front strut suspensions have camber adjustment feature. (Some vehicle models use OE mounts.)
*Highly Durable & Reliable!*
After many years of research and study, TEIN has developed optimally-shaped dust boot made of most suitable material. Elastic & highly-durable dust boot effectively prevents damages to the piston rod and foreign substances from getting inside the shock absorber. (Some vehicle models use OE dust boots.)
Final assembly of shock absorbers is done in the clean room, which is almost equivalent to operating room. Room pressure is kept under control to shut out dust & dirt and all workers entering the room must take air shower, to make sure all the assembly work is done in completely clean air, in order to maintain higher level of accuracy and reliability.
*Thoroughgoing Rust-Proofing!*
Upper mounts and lower brackets are coated with rich TEIN green powder paint. This powder paint has high coating film strength, is highly durable yet is low-pollution due to non-use of harmful solvent. After the shot blasting pre-treatment, the patented "2-layer/1-bake" treatment using anti-rust powder paint is applied for superior durability and high corrosion resistance. (Patent No. 4347712)
On shell case, TEIN's self-developed one-of-a-kind "ZT Coating" is applied, for tougher protection against chipping, often caused by bounced pebbles, and rust. With zero claim rate, against adhesion, out of 500,000dampers sold, we are confident that people living in snowfall area or near seashores would even be very satisfied.
*Highly Durable & Reliable!*
For strut suspensions, sufficiently-thick ribbed plate is used for knuckle bracket to maintain high rigidity. Flange shape edge of the bracket provides larger contact area with the bracket lock, which is fastened with the conical washer inserted in between, to effectively prevent loosening of the bracket lock most commonly occurs on front strut suspensions.
Brackets for brake hoses and ABS sensor harnesses etc are exclusively designed for each vehicle model for hassle-free installation.
Shell case is made of high-strength steel STKM13C and solidly-constructed for firm handling and stable ride.
*Smooth Ride Height Adjustment & One-of-A-Kind Adjusting Wrench!*
FLEX Z has adopted the new wrought aluminum spring seats and low-friction hard-resin thrust washers. These effectively reduces the friction with springs, caused during ride height adjustment, and makes it easier to adjust the ride height with pre-load on the springs.
Shell cases are treated with "ZT Coating", a superlow-friction fluorine resin coating, which is tightly baked onto the surface in-house. This special coating provides superior protection against rust and high lubricity, for keeping a smooth adjustment for a long period.
FLEX Z kit includes one-of-a-kind user-friendly ride height adjusting wrench. It has a 12.7mm (1/2in) sq. hole for attaching spinner handle and/or torque wrench for tightening at high torque.
*No-Sag Springs!*
Included springs are made of high-tensile steel SAE9254 (tensile strength 200kgf/mm2 or over) and cold formed for excellent resistance to sagging and for superior quality stability.
Surface is powder coated for superb protection against chipping & peeling, for high durability and for superior anti-corrosion performance.
High-quality spring can be used under various conditions without any worry.
The most suitable shape of spring (straight or barrel-shaped) is determined for each vehicle model, to provide wide ride height adjustable range and to secure sufficient stroke without compromising ride comfort.
*High-Spec Damper Oil*
Specially-formulated high-spec oil exhibits stable viscosity characteristics at any temperature; from low to high, to allow shock absorbers to stroke smoothly and to generate damping force stably under various conditions. The oil has superior anti-foaming characteristics hence the bubble cavitation and/or thermal degradation hardly occurs, making it even suitable for tough sport driving. The oil also does not deteriorate much with age, making it possible to maintain and deliver superior performance for the long term.
*Replacement Service to Bring Used Shock Absorbers Back to Life!*
TEIN makes NO compromise on after-sales service of FLEX Z. Replacement Service is available for FLEX Z, in the place of overhaul/revalving service, as its "Sealed Structure" components cannot be disassembled.
Description: Flex Z Coilover Kit; Rigid Front Upper Mount; Rigid Rear Upper Mount; Front/Rear Dampening Force Adjustment; EDFC Compatible, Requires Motor Kit EDK05-12120
Spring ID (F) 65mm
Spring ID (R) 70 - 90mm
Spring Length (F) 200mm
Spring Length (R) 175mm
Spring Rate (F) 392lbs/in (7kgf/mm)
Spring Rate (R) 280lbs/in (5kgf/mm)
|,|"Select Year" "Select Here" "2006-2015" "2016-2021+"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||MAZDA-MIATA-TITANIUM-SHIFT-KNOB-1990-1997|,||,|Mazda Miata Titanium Shift Knob 1990-2012|,|TI-SK-9079-MIATA|,|169.00|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Titanium Shift Knob 1990-2012
- Material: Titanium
- Ball style
- Direct fitment with no modification
- 10x1.25 thread adapter for Mazda Miata
|,|||-||MAZDA-MIATA-TOE-STICK|,|20MAMISUANDS|,|Mazda Miata Toe Stick|,|mazda-miata-toe-stick|,|119.99|,|90.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Toe Stick
This tool is specifically designed to be used with the ICM SpecMiata alignment system. This tool dramatically reduces the amount of time required to perform an alignment. Constructed from 1/4" aluminum for durability. No longer is it necessary to repeatedly measure each side of the wheel to determine the toe. Simply hold this tool up against the edge of the rim and it is very apparent if the wheel is toed in our out. This tool is NOT adjustable and will only work on 15" rims with the ICM String System. This tool will work with other string systems as long as the clearance from the wheel to the string is less than 2.5" and the wheel diameter is 15".
|,|||-||TOHPSHAB90|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Mazda Miata Tokico HP Front Shock Absorber 1990-1997|,|304-655|,|114.99|,|90.95|,||,||,|5.000 |,||,||,||,|Mazda Miata Tokico HP Shock Absorber
Manufactured by Tokico, this high performance gas shock will improve your Miata's performance and ride and provide longer life than the factory unit it replaces. Price per shock.
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997
|,|||-||GM-0803|,|ROMISOTO20|,|Mazda Miata Top Boots 1990-2005|,|GM-0803|,|499.95|,|399.02|,||,||,||,||,||,||,|Mazda Miata Top Boots 1990-2005
Factory top boots are prone to fill with air, or even worse, come off in the back and flap in the breeze. We've been there. This is the highest quality top boot on the market. You get a show-quality boot that stays put and doesn't lift up or flap in the wind. We have applications for tops with both plastic and glass windows. Installation takes minutes.
|,|"Select Year" "Select Here" "1990-1997 With Plastic Rear Window" "1990-1997 With Glass Rear Window" "1999-2005 With Glass Rear Window"|-||-|"Select Color" "Select Here" "Black" "Tan"|-||-|"Select Material" "Select Here" "Vinyl" "Stayfast Canvas add(+$190)"|-||-|||-||MAZDA-MIATA-TOUGH-GUY-EYE-LID-LOOK-1999-2000|,|NBBODYSTYLING|,|Mazda Miata Tough Guy Eye Lid Look 1999-2000 - Sale!|,|NB0-0520M|,|99.99|,|62.89|,||,||,|0.000 |,||,||,||,|Mazda Miata Tough Guy Eye Lid Look 1999-2000
It is made in ABS plastic and fits like a second skin on the top of your headlight.
It fits all Mazda® MX-5 TYP NB up to chassi number 200.000 or 1998 - 2000.
So it is not made for the NB Facelift Headlights.
The Headlight lids come unpainted (ready to paint) in a pair of 2, left and right.
|,|"Miata Year" "1999-2000"|-||-|||-||MAZDA-MIATA-TOW-HOOKS-1990-1997|,|19MAMISUANDS|,|Mazda Miata Tow Hooks 1990-1997|,|AWR-04-5998|,|75.00|,|50.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Tow Hooks 1990-1997
Product Description
SCCA Legal tow hooks for 1990-1997 Mazda Miata. Perfect for Spec Miata Class. Same as sold through MAZDASPEED Motorsports.
Weight: 3.00 Lbs
|,|||-||TRDOGRABADIF|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Track Dog Racing - Backing Disk For Spoiler Support|,|TDR-BD|,|25.00|,|18.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Backing Disk For Spoiler Support DISCONTINUED
|,|||-||TRDOGRACUANG|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Track Dog Racing - Custom Angled Gauge Panel 1999-2005|,|TDR-PANEL-M2|,|65.00|,|49.98|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Custom Angled Gauge Panel 1999-2005
This DIN size gauge metal panel has each gauge angled independently towards the driver. Mounts securely using the factory DIN slot.
|,|||-||TRDOGRAFRBRH|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Track Dog Racing - Front Brake Hardware (Springs and clips) 1990-2005|,|TDR-BSPR-F|,|35.00|,|29.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Front Brake Hardware (Springs and clips) 1990-2005
Have you lost some of the springs and retainer clips for your Miata brakes over the years. Well we've got the complete replacement hardware for the front and rear brakes.
Front brake hardware for 1990-2005 Miata. Kit comes with 4 U-Springs and 8 brake pad retainers.
|,|"Select Year" "Select Here" "F90: 1990-1993 Front" "F94: 1994-2003 Front (non-Sport)" "F01: 2001-2005 Front (Sport)"|-||-|||-||TRDOGRAINHES|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Mazda Miata Track Dog Racing - Insulated Heat Shield|,|TDR-HS-NANBNC|,|159.99|,|139.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Insulated Heat Shield
The Track Dog Racing™ exclusive heat shield was designed to help keep your under hood temperatures in check. Manufactured using a triple layer of high-temperature materials. Available for use with factory manifolds and aftermarket headers. Available for all model years of the Miata. A must for supercharger applications.
Click on the Installation Tab for Instructions for more details
|,|||-||MXMITRDOGRAO1|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Mazda Miata Track Dog Racing - Oil Catch Can 1990-2005|,|TDR-CCAN-KIT|,|135.00|,|119.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Oil Catch Can 1990-2005
Our TDR oil catch can helps prevent oil from entering the intercooler under increased crank pressure and therefore reducing efficiency. We recommend a catch can on high boost applications over 10 PSI or aggressive driving where high RPM is common. Comes with SS bracket for mounting to the brake booster and heavy duty cloth covered rubber hose.
|,|||-||MXMITRDOGRAO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Track Dog Racing - Oil Pressure Kit 1995-2005|,|TDR-OP-SEN|,|129.00|,|104.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Track Dog Racing - Oil Pressure Kit 1995-2005
In 1995 Mazda changed the oil pressure gauge into a go/no-go gauge indicator. By replacing the sender to a voltage signal you can have real oil pressure readings. The Oil Pressure Kit requires adjusting the pointer on the factory gauge. Kit comes complete with detailed instructions and includes the oil pressure sender, threaded coupling and lead wire.
|,|||-||MXMITRDOGRAR1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata Track Dog Racing - Radio Removal Tool|,|TDR-RRT|,|18.95|,|14.99|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Radio Removal Tool
Used this to get your old stock radio out of the center console with ease!
|,|"Shipping cost" "add(+$9.99)"|-||-|||-||TRDOGRAREBRH|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Track Dog Racing - Rear Brake Hardware (Springs and clips) 1990-2005|,|TDR-BSPR-R|,|45.00|,|28.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Rear Brake Hardware (Springs and clips) 1990-2005
Have you lost some of the springs and retainer clips for your Miata brakes over the years. Well we've got the complete replacement hardware for the front and rear brakes.
Rear brake hardware for 1990-2005 Miata. Kit comes with 4 W-Springs and 8 brake pad retainers.
NOTE: Only for NON Sport Suspension. For use with Standard Suspension only.
|,|||-||TRDOGRASPTU|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Track Dog Racing - Spoiler Turnbuckle|,|TDR-TBS-8-9|,|75.00|,|59.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Spoiler Turnbuckle
Mostly aluminum construction for strength and lightness. One side is reverse threaded making it easy to adjust the length. Includes mounting hardware as shown.
Center section is anodized black aluminum with "Track Dog Racing" logo laser etched in the center. Adjustable length range for the 8" turn-buckle is 10 1/2" - 12". Adjustable length for the 9" turn-buckle is 11 1/2" - 13"
NOTE: Starting in September 2013 the TDR-04M125 and TDR-90RB125 switched to a 9" turnbuckle. If you are replacing a turn-buckle on one of these Radical splitters, measure the length of the black support rod to determine length before ordering. If you have an earlier version of TDR-04M125 or TDR-90RB125, you can either replace both turn-buckles with a 9" or keep the current 8". The 9" are a better fit but the 8" are still functional.
|,|"Select Size" "8 inches" "9 inches add(+$10)"|-||-|||-||MXMITRDOGRAS|,|20MAMIBRRORE|,|Mazda Miata Track Dog Racing - Stainless Steel Brake Line Kit 1990-2015|,|TDR-BRAK-LIN1-LIN2|,|170.00|,|159.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Track Dog Racing - Stainless Steel Brake Line Kit 1990-2015
Our high performance stainless braided brake lines eliminate the mushy pedal feel you get when your OEM rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tube, this 4-line comes with a clear protective cover and is DOT-approved. They work perfectly on street or track driven Miatas. Each kit includes all new banjo bolts, copper washers and brass distribution block*. Fits all 1990-2015 Miata MX-5 including the Mazdaspeed.
|,|"Select Year" "Select Here" "1990-2005" "2006-2015"|-||-|||-||TRDOGRA19AIR|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata Track Dog Racing Air Splitter for Racing Beat Type II Fiberglass Bumper 1990-1997|,|TDR-90RB122|,|149.00|,|129.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Track Dog Racing Air Splitter for Racing Beat Type II Fiberglass Bumper 1990-1997
Designed to protect the Racing Beat Type II fiberglass bumper. Extends extends 1.75" at the outer edges and 1" below the radiator opening. Includes all mounting hardware.
At speed the Track Dog Racing Air Splitter increases the down force on the front of your Miata lowering the center of gravity and giving the front tires more grip. As oncoming air hits the front of your Miata it creates a high pressure zone. The air splitter sends the majority of this high pressure air over and around your Miata to give it down force. The air that does go under your Miata has to increase in velocity which creates a low pressure area to further increase the down force. The air splitter also defends your Miata’s front end against scraping and dings. Made from 1/16” think, high-impact ABS plastic and built to take a surprising amount of abuse. Splitter extends 1.75” at the out edges and 1” below the radiator opening. Includes all mounting hardware. Recommend painting the splitter for best appearance.
For use with the Racing Beat Type II Fiberglass Bumper only.
|,|||-||TRDOGRA19EXA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda Miata Track Dog Racing EXTREME Air Splitter for factory R Spoiler 1990-1997|,|TDR-90M122|,|149.00|,|129.00|,||,||,|5.000 |,||,||,||,|MX-5 Miata Track Dog Racing EXTREME Air Splitter for factory R Spoiler 1990-1997
Extends extends 1.75" at the outer edges and 1" below the radiator opening. Includes all mounting hardware.
At speed the Track Dog Racing Air Splitter increases the down force on the front of your Miata lowering the center of gravity and giving the front tires more grip. As oncoming air hits the front of your Miata it creates a high pressure zone. The air splitter sends the majority of this high pressure air over and around your Miata to give it down force. The air that does go under your Miata has to increase in velocity which creates a low pressure area to further increase the down force. The air splitter also defends your Miata’s front end against scraping and dings. Made from 1/16” think, high-impact ABS plastic and built to take a surprising amount of abuse. Splitter extends 1.75” at the out edges and 1” below the radiator opening. Includes all mounting hardware. Recommend painting the splitter for best appearance.
For use with the factory R front lower spoiler only.
|,|||-||TDR-INTAKE-06|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|Mazda Miata Track Dog Racing High Flow Intake 2006-2015|,|TDR-CAI-NC|,|359.00|,|239.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Track Dog Racing High Flow Intake 2006-2015
The stock MX-5 air box is restrictive and uses an inexpensive flat paper filter. The TDR intake has much better breathing by using an open-element K&N air-filter placed directly in the flow of cool air in the front grill of the Miata.
Most after intakes require the removal of the front bumper every time you need to service your air-filter element. Once the TDR intake kit is installed you will be able to service the K&N air-filter without removing the bumper cover.
NOTE: The aluminum housing that the Mass Air Flow Sensor bolts into may be raw aluminum or blue anodized aluminum depending on what we have on hand. Both are exactly the same with the color being the only exception. Sorry but we can't offer a choice in color.
|,|||-||TRDOGRA19RAA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Track Dog Racing Radical Air Splitter 1999-2000|,|TDR-99M125|,|249.00|,|219.00|,||,||,|5.000 |,||,||,||,|MX-5 Miata Track Dog Racing Radical Air Splitter 1999-2000
The Radical is the Track Dog Racing track model for maximum down force for the 1999-2000 model Miata using the factory air dam. The air splitter extends 2.5' from the front and includes adjustable turnbuckles for added strength and adjustability.
At speed the Track Dog Racing Air Splitter increases the down force on the front of your Miata lowering the center of gravity and giving the front tires more grip. As oncoming air hits the front of your Miata it creates a high pressure zone. The air splitter sends the majority of this high pressure air over and around your Miata to give it down force. The air that does go under your Miata has to increase in velocity which creates a low pressure area to further increase the down force. The air splitter also defends your Miata’s front end against scraping and dings. Made from 1/16” think, high-impact ABS plastic and built to take a surprising amount of abuse. Splitter extends 1.75” at the out edges and 1” below the radiator opening. Includes all mounting hardware. Recommend painting the splitter for best appearance. For use with the factory front lower spoiler only.
Click Here For Close Up Image
|,|||-||MAZDA-MIATA-TRACK-DOG-RACING-RADICAL-SPLITTER-FOR-THE-1990-1997-R-PACKAGE-LIP|,|NAEXVIALL|,|Mazda Miata Track Dog Racing Radical Splitter for the 1990-1997 R-Package lip|,|TDR-90M125|,|249.99|,|219.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Track Dog Racing Radical Splitter for the 1990-1997 R-Package lip
The Radical is the Track Dog Racing track model for maximum downforce for the 1990-1997 model Mazda Miata using the factory R-Package lip. The air splitter extends 2.5' from the front and includes adjustable turnbuckles for added strength and adjustability. Includes all mounting hardware; requires factory R-Package lip.
|,|||-||MAZDA-MIATA-TRACK-DOG-RACING-RADICAL-SPLITTER-FOR-THE-2004-2005-MAZDASPEED1|,|NAEXVIALL|,|Mazda Miata Track Dog Racing Radical Splitter for the 2004-2005 MazdaSpeed|,|TDR-04M125|,|249.99|,|219.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Track Dog Racing Radical Splitter for the 2004-2005 MazdaSpeed
The Radical is the Track Dog Racing track model for maximum downforce for the '04-05 MAZDASPEED Miata using the factory air dam. The air splitter extends 2.5' from the front and includes adjustable turnbuckles for added strength and adjustability. Includes all mounting hardware; requires factory air dam.
|,|||-||MAZDA-MIATA-TUCKIN99-BLUE-REAR-VIEW-MIRROR-1989-2005|,|20MAMIINVIAL|,|Mazda Miata TUCKIN99 Blue Rear View Mirror 1989-2015|,|mazda-miata-tuckin99-blue-rear-view-mirror-1989-2005|,|109.99|,|79.99|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Blue Rear View Mirror 1989-2015
Anti-glare rear view mirror made for the NA (flat lens) and NB (curved lense) to improve rear view at night. It’s a great way to keep the lights from high vehicles to bling sight during driving.
• Installs using 3M double-sided tape
• Improves safety while driving
• Only available for NA & NB Miatas (1989-2005)
|,|"Application" "Select Application" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NC1 (2006-2008) add(+$10)" "NC2 (2009-2012) add(+$10)" "NC3 (2013-2015) add(+$10)"|-||-|||-||TUCKIN99-BRAKE-DUCT-NC|,|20MIMIEXPA|,|Mazda Miata TUCKIN99 Brake Duct 2006-2008|,|TUCKIN99-BRAKEDUCT-NC|,|420.00|,|365.00|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Brake Duct 2006-2008
*Availability: Ships in 5-10 business days
Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Functional and makes the bumper more aggressive.
• Perfect fit
• Flows really well with the lines of the car
• Stylish and durable
• Gives a more aggressive look to the NC
• PRICE IS FOR THE PAIR
• Available in FRP or CF
• Only available for NC Miata (2006-08)
|,|"Material" "FRP" "Carbon Fiber add(+$150)"|-||-|||-||TUCKIN99-ENGINE-TORQUE-DAMPER|,|19MAMIENPEVI|,|Mazda Miata TUCKIN99 Engine Torque Damper 1990-2005|,|tuckin99-engine-torque-damper|,|360.00|,|279.95|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Engine Torque Damper 1990-2005
*Availability: Ships in 5-10 business days
Product made by TUCKIN99 to help shift faster. Cannot be used with front strut tower bar.
• Reduce the movement of the engine in the bay
• Easier shifting
• Easy installation
• Only available for NA Miata (1989-1997)
|,|"Year" "1990-1993" "1994-1997" "1999-2000 add(+$99)" "2001-2005 add(+$99)"|-||-|||-||TUCKIN99-EYE-LIDS-NC|,|20MAMIEXLI|,|Mazda Miata TUCKIN99 Eye Lids 2006-2008|,|tuckin99-eye-lids-nc|,|240.00|,|165.00|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Eye Lids 2006-2008
*Availability: Ships in 5-10 business days
Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Makes the headlight look more aggressive.
• Perfect fit
• Flows really well with the lines of the car
• Stylish and durable
• Gives a more aggressive look to the NC
• PRICE IS FOR THE PAIR
• Available in FRP or CF
• Only available for NC Miata (2006-2008)
|,|"Material" "FRP" "Carbon Fiber add(+$100)"|-||-|||-||TUCKIN99-FRONT-BUMPER-GRILLE-NC|,|20MIMIEXPA|,|Mazda Miata TUCKIN99 Front Bumper Grille 2006-2008|,|tuckin99-front-bumper-grille-nc|,|680.00|,|425.00|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Front Bumper Grille 2006-2008
*Availability: Ships in 5-10 business days
*It is bolt-on, no modification needed.
Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Makes the bumper look more aggressive.
• Perfect fit
• Flows really well with the lines of the car
• Stylish and durable
• Gives a more aggressive look to the NC
• Available in high quality FRP
• Only available for NC Miata (2006-2008)
|,|"EMS Shipping Cost" "add(+$65)"|-||-|||-||TUCKIN99-FRONT-LIP-NC|,|20MIMIEXPA|,|Mazda Miata TUCKIN99 Front Lip 2006-2008|,|tuckin99-front-lip-nc|,|960.00|,|699.00|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Front Lip 2006-2008
*Availability: Ships in 5-10 business days
Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Functional and makes the bumper more aggressive.
• Perfect fit
• Flows really well with the lines of the car
• Stylish and durable
• Gives a more aggressive look to the NC
• Available in FRP
• Only available for NC Miata (2006-08)
|,|"EMS Shipping Cost" "add(+$275)"|-||-|||-||MAZDA-MIATA-TUCKIN99-LICENSE-PLATE-HOLDER-2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata TUCKIN99 License Plate Holder 2016+|,|mazda-miata-tuckin99-license-plate-holder-2016|,|104.99|,|89.90|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 License Plate Holder 2016+
Front license plate relocation kit made by Tuckin99 for the 2016+ ND Miata. This kit relocates the number plate to the side of the Miata for both a stylish look, and increased cooling capabilities by not having the license plate impede airflow to the radiator. It installs using front tow hook hole and will not require any cutting or drilling.
Please note that you need to drill 2 additional holes to fit US plates.
-Looks cool
-Does not interfere with fog lamps
-Does not require any cutting or drilling into the bumper
-Only available for the ND (2016+) Miata
|,|"Application" "ND (16+)"|-||-|"Socket Wrench" "SELECT OPTION" "No" "Yes(Recommended) add(+$15)"|-||-|||-||TUCKIN99-N2-FENDER-FLARES-NA|,|NAEXVIALL|,|Mazda Miata TUCKIN99 N2 Fender Flares 1990-1997|,|tuckin99-n2-fender-flares-na|,|1,250.00|,|849.95|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 N2 Fender Flares 1990-1997
*Availability: Ships in 5-10 business days
Product from JAPAN made from high quality FRP. Replica of the well known Mazdaspeed N2 Flares. This item is made by TUCKIN99. It gives the capacity to run wider wheels with lower offset and larger tires on your roadster without compromising the look of it!
• Makes the body of the car wider
• Capable of running wide wheels/tires
• Lightweight
• Gives a really aggressive look to the car!
• 100% perfect fitting part
• Only available for NA Miata (1990-1997)
|,|"Year" "1990-1993" "1994-1997"|-||-|"EMS Shipping Cost" "add(+$150)"|-||-|||-||MAZDA-MIATA-TUCKIN99-OHLINS-BTO-COILOVERS-2016|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata TUCKIN99 Ohlins BTO Coilovers 2016+|,|mazda-miata-tuckin99-ohlins-bto-coilovers-2016|,|2,999.99|,|2,799.95|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Ohlins BTO Coilovers 2016
The Ohlins BTO (Build-to-order) is based in their highly praised DFV, but with an higher quality standard. This is a special edition for ND (2016+) MX-5 in collaboration with TUCKIN99.
This coilover system is based on racing data from TUCKIN99 to improve the regular DFV system.
Normally, suspension systems are mass produced, while this can keep prices lower, quality can sometimes take a hit. The Ohlins BTO program from Japan aims to solve this by building the kits as orders arrive, and taking extra time to test them in the lab in order to ensure the highest standards are met and exceeded.
-Standard spring rate: F:9kgf/mm R: 4kgf/mm
-Upper mount: Rubber mounts
-Damping adjustability: 20-way adjustable
It is possible to change spring rate for a different one, but this is the recommended one by TUCKIN99.
Check out our installation instructions for coilover suspension!
-Highly lauded suspension by Ohlins
-Aluminum cylinder shock with full travel length
-Rare opportunity for such a fantastic suspension
-Assembled & Tested in Japan
-Only available for the ND (2016+) Miata
|,|"Application" "ND (16+)"|-||-|"Shipping Cost" "add(+$139)"|-||-|||-||TUCKIN99-REAR-BUMPER-SKIRTS-NC|,|20MIMIEXPA|,|Mazda Miata TUCKIN99 Rear Bumper Skirts 2006-2008|,|tuckin99-rear-bumper-skirts-nc|,|600.00|,|499.95|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Rear Bumper Skirts 2006-2008
*Availability: Ships in 5-10 business days
Product from JAPAN made by TUCKIN99. Subtle and stylish touch to the exterior. Makes the bumper look more aggressive and lower.
• Perfect fit
• Flows really well with the lines of the car
• Stylish and durable
• Gives a more aggressive look to the NC
• PRICE IS FOR THE PAIR
• Available in high quality FRP
• Only available for NC Miata (2006-2008)
|,|"EMS Shipping Cost" "add(+$49)"|-||-|||-||TUCKIN99-REAR-LIP|,|NEW|,|Mazda Miata TUCKIN99 Rear Lip 2016+|,|tuckin99-rear-lip|,|799.00|,|549.95|,||,||,||,||,||,||,|Mazda Miata TUCKIN99 Rear Lip 2016+
Rear bottom skirt from TUCKIN99 in collaboration with Chargespeed for the 2016+ ND MX-5. It has a very near look and will totally compliment the rear bumper of the fourth generation Miata. Please note that the Carbon Fiber finish is not UV coated and it is recommended to have it coated locally if you park the car under the sun most of the time.
• Easy installation
• Looks great
• Made of FRP or Carbon Fiber
• Only available for ND (2016+) MX-5 Miata
|,|"Select Material" "Select Here" "FRP" "Carbon Fiber add(+$200)"|-||-|||-||MAZDA-MIATA-TUCKIN99-REAR-STRUT-BAR-2016|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata TUCKIN99 Rear Strut Bar 2016+|,|mazda-miata-tuckin99-rear-strut-bar-2016|,|294.45|,|254.98|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Rear Strut Bar 2016+
Rear strut bar made by Tuckin99 of Japan for the 2016+ ND MX-5. Widely used in automotive tuning, a strut tower bar will connect the left and right sides of the vehicle together to stiff-en the car up and improve handling. This bar is for the rear.
Please note that during installation trimming of the OEM trunk liner is required for install.
-Aluminum shaft with steel mounts
-Beautiful polished finish
-Easy bolt-on installation
-Only available for the ND (2016+) Miata
|,|"Application" "ND (2016-2019)"|-||-|"Shipping Cost from Japan" "add(+$59)"|-||-|||-||MAZDA-MIATA-TUCKIN99-SHORT-ANTENNA-VER1-2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata TUCKIN99 Short Antenna Ver1 2016+|,|mazda-miata-tuckin99-short-antenna-ver1-2016|,|99.99|,|79.99|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Short Antenna Ver1 2016
Short antenna made by TUCKIN'99 to improve the look of the exterior of the ND MX-5 (2016+). It's a direct replacement to the OEM antenna
|,|"Application" "ND (2016+)"|-||-|||-||TUCKIN99-SMALL-FENDER-FLARES-NA|,|NAEXBOST|,|Mazda Miata TUCKIN99 Small Fender Flares 1990-1997|,|tuckin99-small-fender-flares-na|,|910.00|,|754.02|,||,||,|0.000 |,||,||,||,|Mazda Miata TUCKIN99 Small Fender Flares 1990-1997
*Availability: Ships in 5-10 business days
• Makes the body of the car wider
• Capacity to run bigger tires
• Lightweight
• Gives a really aggressive look to the car!
• Only available for NA Miata (1990-1997)
|,|"Year" "1990-1993" "1994-1997"|-||-|"EMS Shipping Cost" "add(+$110)"|-||-|||-||GEMAMITUSIWI|,|NAEXLI|,|Mazda Miata Turn Signal Socket 1990-1997|,|NA01-51-064|,|79.99|,|59.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Turn Signal Socket 1990-1997
|,|||-||P1154M1|,|NAEXGRBRA|,|Mazda Miata Ultra-Heavy Mesh Grille for 1990-1997 |,|P1154M1|,|122.99|,|103.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Ultra-Heavy Mesh Grille for 1990-1997
Enhance your Miata's good looks and keep out unwanted debris with a Wire Mesh Grille!
Adding a Grille is the single most dramatic improvement you can make to your Miata's appearance! It will also protect both your engine radiator and your air conditioner radiator from damage due to stones and other road debris.
These Mesh Grilles are made of stainless steel. This should have been a factory part; no Miata should be without one.
This grille is made from unbelievably heavy stainless steel mesh. It's the top one in the comparison photograph. We have made a limited quantity, and when they are gone they are gone.
The large wire size makes them very visible.
|,|"Select Color" "Select Here" "Silver" "Black Powdercoat add(+$5)"|-||-|||-||DBA4538S-NB-FRONT-ROTOR|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Uni-Directional Slotted Front Brake Rotor 1994-2005|,|DBA-DBA4538S|,|150.00|,|134.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Front Brake Rotor 1994-2005
T-Slot Uni-Directional Slotted Brake Rotor
*For non-sport models only
|,|"Special Handling fee" add((+$10)"|-||-|||-||MAZDA-MIATA-DURAFLEX-BOMBER-REAR-ADD-ON-BUMPER-EXTENSIONS-2-PIECE-1999-2005|,|NBACCESSORIES|,|Mazda Miata Universal Duraflex Bomber Wing Trunk Lid Spoiler - 1 Piece 1999-2015 - Sale! |,|102208|,|319.99|,|270.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Universal Duraflex Bomber Wing Trunk Lid Spoiler - 1 Piece 1999-2015
Product Description:
Universal Duraflex Bomber Wing Trunk Lid Spoiler - 1 Piece
Note: this wing is 60" wide from tip to tip and 41" wide from pillar to pillar. will fit most applications. please measure the length of your trunk and decide if this wing will fit your vehicle appropriately.
Fits the following models: Fits All Models
* Hand laid, high quality 6 oz. fiberglass
* Signature black finish
* High quality weather resistant aluminum mesh grille (where applicable)
* Proprietary polymer blend for maximum flexibility
* Increased durability and longer service life
* Reduced damage rate up to 75%
* Limited warranty and satisfaction guarantee
|,|"Shipping Cost" "add(+$169)"|-||-|||-||MAZDA-MIATA-RAKED-SHORTY-ANTENNA|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Universal Raked Shorty Antenna|,|906-185|,|69.99|,|59.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Universal Raked Shorty Antenna
Our Miatas are small and the antenna should be too! Update your Miata's look with a shorty raked antenna. At just 7" long, the black mast sits at a raked angle, and is easily unscrewed for removal if you have a car cover without a hole.
This antenna is delivered to you as a generic kit, with many wires included for cars that aren't "plumbed" with wiring for an antenna. We all know Miatas already have antennas! All the wiring you need is most probably already in your trunk. Installation is simply plug-and-play in your trunk area, you can toss the extra wires in the kit or use them for other projects.
|,|||-||UPPER-SHOCK-MOUNTS-2-0-INCH|,|19MAMISUANDS6|,|Mazda Miata Upper Shock Mounts 1.5 or 2.0 inch tall Front or Rear Coilover Top Hats 1990-2005|,|EB-UpperShock2|,|349.05|,|285.95|,||,||,||,||,||,||,|Mazda Miata Upper Shock Mounts 1.5 or 2.0 inch tall Front or Rear Coilover Top Hats 1990-2005
Diftech Upper Shock Mounts 2.0 inch tall Front or Rear Coilover Top Hats for Mazda MX5 Miata NA NB
These extended front top hats for NA and NB Miatas are designed to convert to a true coaxial setup and will add additional compression stroke to the shock. This kit is a 2" extension for Penske shocks, or other dampers that use a similar shaft-extension type design. For most other dampers, use these hats. The top hat design allows the shock shaft to be tucked higher into the body of the car allowing additional room for the shock body to move more than normal. This results in more shock travel before bottoming out and increased suspension compliance and traction. The spherical bearing upper mount also eliminates bushing compliance of stock mounts and gives greater control to dampers under high racing loads.
Non-coaxial upper mounts, while very economical for production and fine for street use, leave a lot of available suspension performance on the table. This can be vastly improved by going to a true coaxial setup that separates the upper mount and spring perch. Non-coaxial upper spring location induces bind in the shock shaft increasing friction on the shock piston and also forcing the spring to have nonlinear compression rate. Increased bind leads to higher shock oil temperature, additional wear in pistons and seals, and greatly reduces traction at the wheel. This kit will convert the non-coaxial top hats that come with most coilover suspension kits to a true coaxial set-up.
Not designed for use with stock or stock-type springs. DIFtech install kit required to adapt to a linear race spring.
Made in the USA from 6061 billet aluminum. All Diftech upper mounts use high strength FK wide-series bearings with Teflon liners for maintenance free, quiet operation. On-the-shelf install kits are available for most popular suspensions on the market and are required for installation. Customers can email us for custom install kits for specific racing applications.
|,|"Choose an option" "Select Here" "1.5 Inch" "2.0 Inch"|-||-|||-||NA-UPPER-STEERING-COVER|,|INSETE|,|Mazda Miata Upper Steering Column Cover 1990-1997|,|OEM-NA01-60-220-00|,|29.27|,|24.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Upper Steering Column Cover 1990-1997
#8 on Diagram Shown
-Black Plastic
|,|||-||MAZDA-MIATA-V-SPECIAL-NOSE-BADGE|,|NAEXBAGR|,|Mazda Miata V-Special Nose Badge|,|V-SPECIAL-NOSE-BADGE|,|69.99|,|59.99|,||,||,|0.000 |,||,||,||,|Mazda Miata V-Special Nose Badge
Product Description:
• Same as original V-Special Nose Badge
• END OF PRODUCTION, LIMITED QUANTITIES
• High quality product from Japan
• Available for NA Miata (1989-1997)
Product from Japan - 49mm diameter.
|,|||-||MS-910-330|,|NBINDA|,|Mazda Miata VIEW LARGER Black Brushed Gauge Cluster Bezel by Jass 1999-2005|,|ms-910-330|,|79.55|,|64.65|,||,||,||,||,||,||,|Mazda Miata VIEW LARGER Black Brushed Gauge Cluster Bezel by Jass 1999-2005
Black brushed and engraved stainless steel instrument cluster surround for Mazda Miatas.These bezels match the new Black Brushed Stainless Steel interior styling upgrades from Jass. This set includes engraved stainless plates for the Tachometer and Speedometer dials, to bring the most out of your Miatas stock black classic gauge faces.
|,|||-||MAZDA-MIATA-VINTAGE-CHROME-MIRRORS-1993-1997--PAIR-|,|NBACCESSORIES|,|Mazda Miata Vintage Chrome Mirrors 1993-2005 (Pair)|,|901-365|,|149.99|,|129.95|,||,||,||,||,||,||,|Mazda Miata Vintage Chrome Mirrors 1993-2005 (Pair)
Add a vintage look to your Miata with these chrome mirrors we borrowed from our British sports car parts division, swapped in convex mirrors for the modern car, and added Miata-specific mounting plates. The mirrors are reproductions of the Lucas style mirrors popular on British sports cars in the fifties and sixties. Will fit earlier cars if center mirror hole on door is widened. Sold as a pair.
These Vintage Chrome Mirrors are stunning on Miatas.
These Mazda Miata Vintage Chrome Mirrors are made in the USA.
Note: Will fit earlier Miata's if center mirror hole on door is widened.
Sold as a Pair.
|,|"Select Year" "Select Here" "1993-1997" "1999-2005"|-||-|||-||VINTAGE-LOGO-DOOR-PULLS-BY-JASS-PERFORMANCE---BLANKING-KIT--EACH|,|NAACCESSORIES|,|Mazda Miata Vintage Logo Door Pulls by Jass Performance - Blanking Kit, Each 1990-1997|,|903-667|,|39.99|,|31.98|,||,||,||,||,||,||,|Mazda Miata Vintage Logo Door Pulls by Jass Performance - Blanking Kit, Each 1990-1997
These door pulls by Jass Performance bring race-inspired parts to your Miata's interior and vintage ""M"" logo style. The door pulls are offered in black or silver and have genuine leather pulls, kits are two pulls per kit, one kit does one car. Blanking plates compliment the pulls and cover the armrest mounting holes, and are sold each. Stock armrests must be removed in order to install these parts. Jass aluminum pieces and leather straps are very high quality.
Ordering Notes:
Blanking kits are sold each. 1990-93 and 1996-97 doors will need 2 per door, 4 total per car. 1994-95 cars will only need 1 per door, 2 total per car.
|,|||-||VINTAGE-LOGO-DOOR-PULLS-BY-JASS-PERFORMANCE|,|NAACCESSORIES|,|Mazda Miata Vintage Logo Door Pulls by Jass Performance 1990-1997|,|903-665-6|,|109.99|,|89.95|,||,||,||,||,||,||,|Mazda Miata Vintage Logo Door Pulls by Jass Performance 1990-1997
These door pulls by Jass Performance bring race-inspired parts to your Miata's interior and vintage ""M"" logo style. The door pulls are offered in black or silver and have genuine leather pulls, kits are two pulls per kit, one kit does one car. Blanking plates compliment the pulls and cover the armrest mounting holes, and are sold each. Stock armrests must be removed in order to install these parts. Jass aluminum pieces and leather straps are very high quality.
Ordering Notes:
This product are kits with two pulls per kit. Purchase 1 per car.
|,|"Select Color" "Select Here" "Black" "Silver"|-||-|||-||MAZDA-MIATA-VINTAGE-WINDOW-SWITCHES|,|NBINVIALL|,|Mazda Miata Vintage Window Switches 1999-2005|,|903-85X|,|169.99|,|154.98|,||,||,||,||,||,||,|Mazda Miata Vintage Window Switches 1999-2005
Add an aircraft or race car inspired look to your Miata’s interior with Vintage Toggle Window Switches and surrounds from Jass Performance. Window switches are completely plug-n-play with the factory harness. Surrounds and faceplate are made from brushed stainless steel to match the shift knobs and handbrake handle from Jass Performance. Switch labels are laser engraved.
|,|"Select Year and Color" "Select Here" "1999-2000 Silver" "1999-2000 Black" "2001-2005 Silver" "2001-2005 Black"|-||-|||-||903-5921|,|NADASHBOARD|,|Mazda Miata Vintage Window Switches by Jass Performance 1990-1997|,|903-592|,|119.99|,|106.98|,||,||,||,||,||,||,|Mazda Miata Vintage Window Switches by Jass Performance 1990-1997 with OEM Center Console
Add an aircraft or race car inspired look to your Miata's interior with Vintage Toggle Window Switches and surrounds from Jass Performance. Window switches are completely plug-n-play with the factory harness. Surrounds and faceplate are made from brushed stainless steel to match the shift knobs and handbrake handle from Jass Performance. Switch labels are laser engraved.
This part is working with 1990-1997 OEM Center Console.
|,|"Select Style" "Select Here" "Ashtray Surround add(+$15)" "Cupholder Surround add(+$15)" "Switches Only"|-||-|"Select Color" "Silver" "Black"|-||-|||-||VOODOO-KNOB--MAGNUM--DELRIN--POLISHED--BLACK|,|NBINVIALL|,|Mazda Miata Voodoo Magnum Knob (Delrin Polished Black)|,|VK-DB|,|99.99|,|79.95|,||,||,||,||,||,||,|Mazda Miata Voodoo Magnum Knob (Delrin Polished Black)
Our latest Voodoo knob designed specifically for harsh environments (Hot or Cold). This newest Voodoo knob is identical to our other Voodoo knobs in producing instant shortened-throw shifting but with the added benefit of insulating against either heat or cold conditions. This is achieved by the material it is made from. The entire knob is made from Delrin (acetal polythermoplastic), and polished.
It is however, 1/2 the weight of our other (aluminum) Voodoo knobs at 3 oz. (84 grams). So if you want a heavy knob this one is not for you. On the other hand if you want a Voodoo knob, but are concerned about the knob absorbing heat or cold, this IS your Voodoo knob.
|,|||-||VOODOO-KNOB--MIATA--PISTOL-GRIP--BLACK-PEARL|,|NBINVIALL|,|Mazda Miata Voodoo Pistol Grip Knob (Black Pearl)|,|VK-117|,|89.99|,|59.95|,||,||,||,||,||,||,|Mazda Miata Voodoo Pistol Grip Knob (Black Pearl)
|,|||-||VOODOO-KNOB--MIATA--PISTOL-GRIP--POLISHED-DELRIN|,|NBINVIALL|,|Mazda Miata Voodoo Pistol Grip Knob (Polished Delrin)|,|VK-14D|,|69.99|,|59.95|,||,||,||,||,||,||,|Mazda Miata Voodoo Pistol Grip Knob (Polished Delrin)
Our latest Pistol Grip Voodoo knob designed specifically for harsh environments (Hot or Cold). This newest Voodoo knob is identical to our other Pistol Grip Voodoo knobs in producing instant shortened-throw shifting but with the added benefit of insulating against either heat or cold conditions. This is achieved by the material it is made from.
The entire knob is made from Delrin (acetal polythermoplastic), and polished. It is however, 1/2 the weight of our other (aluminum) Pistol Grip Voodoo knobs at 2.3 oz. (66 grams). So if you want a heavy knob this one is not for you. On the other hand if you want a Voodoo knob, but are concerned about the knob absorbing heat or cold, this IS your Voodoo knob.
|,|||-||VOODOO-KNOB--MIATA--PISTOL-GRIP--POLISHED|,|NBINVIALL|,|Mazda Miata Voodoo Pistol Grip Knob (Polished)|,|VK-12|,|89.99|,|59.95|,||,||,||,||,||,||,|Mazda Miata Voodoo Pistol Grip Knob (Polished)
The "Pistol Grip" Voodoo knob is a classic Voodoo shape revived for a limited time. It is 1 3/8" diameter at it's widest (near the top), tapering to about 7/8" diameter at it's base. The knob measures 3" tall, but the thread is recessed 1" so it meets perfectly with the top of the boot, and still reduces the throw between gears.
|,|||-||VOODOO-KNOB-MIATA-PISTOL-GRIP-SPUN|,|NBINVIALL|,|Mazda Miata Voodoo Pistol Grip knob (Spun)|,|VK-11|,|89.99|,|59.95|,||,||,||,||,||,||,|Mazda Miata Voodoo Pistol Grip knob (Spun)
The "Pistol Grip" Voodoo knob is a classic Voodoo shape revived for a limited time. It is 1 3/8" diameter at it's widest (near the top), tapering to about 7/8" diameter at it's base. The knob measures 3" tall, but the thread is recessed 1" so it meets perfectly with the top of the boot, and still reduces the throw between gears.
|,|||-||VOODOO-KNOB--MIATA--PISTOL-GRIP--TEXTURED|,|NBINVIALL|,|Mazda Miata Voodoo Pistol Grip Knob (Textured)|,|VK-13|,|85.99|,|59.95|,||,||,||,||,||,||,|Mazda Miata Voodoo Pistol Grip Knob (Textured)
The "Pistol Grip" Voodoo knob is a classic Voodoo shape revived for a limited time. It is 1 3/8" diameter at it's widest (near the top), tapering to about 7/8" diameter at it's base. The knob measures 3" tall, but the thread is recessed 1" so it meets perfectly with the top of the boot, and still reduces the throw between gears.
|,|||-||VOODOO-KNOB--MIATA--PISTOL-GRIP--PIANO-BLACK|,|NBINVIALL|,|Mazda Miata Voodoo Pistol Grip Kob (Piano Black)|,|VK-14|,|85.99|,|59.95|,||,||,||,||,||,||,|Mazda Miata Voodoo Pistol Grip Kob (Piano Black)
The "Pistol Grip" Voodoo knob is a classic Voodoo shape revived for a limited time. It is 1 3/8" diameter at it's widest (near the top), tapering to about 7/8" diameter at it's base. The knob measures 3" tall, but the thread is recessed 1" so it meets perfectly with the top of the boot, and still reduces the throw between gears.
|,|||-||1990-1997-MAZDA-MIATA-W-TYP-REAR-LIP-FIBERGLASS2|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata W-Typ Rear Lip Fiberglass 1990-1997|,|490010|,|325.00|,|292.94|,||,||,|0.000 |,||,||,||,|Mazda Miata W-Typ Rear Lip Fiberglass 1990-1997
Parts are made out of a high quailty material and come with wire mesh if applicable.
-Professional installation required
|,|"Freight Cost" "add(+$159.00)"|-||-|||-||MAZDA-MIATA-WALBRO-HP-FUEL-PUMP-1999-2005|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Walbro HP Fuel Pump 1994-2005|,|GSS342|,|185.57|,|98.02|,||,||,||,||,||,||,|Mazda Miata Walbro HP Fuel Pump 1994-2005
Whether you're upping the boost or stroking your block - more fuel is a MUST!
Walbro Fuel Pumps are the industry standard for high performance fuel pumps regardless of make or model.
Walbro Fuel Pumps provide unmatched performance, longevity and reliability - not to mention fuel delivery. From 190LPH to 470LPH Walbro will make sure your best is fed!
Trust only Walbro Fuel Pumps when it comes to your vehicle.
Fuel Pump: GSS342
The Walbro high output in-tank electric fuel pumps are available in flow ratings of 255 liters of fuel per hour. These particular pumps flow significantly more fuel at higher pressure than standard-pressure versions. For example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At that same 80 PSI the equivalent HP (high pressure) fuel pump will flow over 210 liters (50 gallons) per hour.
Walbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification. Coverage includes most popular Acura and Honda, and many other Import applications.
|,|"Select Year" "Select Here" "1994-1997" "1999-2005"|-||-|||-||MAMICHS15CH1|,|CHWH|,|Mazda Miata Wheel Chaparral Special Edition Celestial Black 15x7|,|400-007|,|1,299.00|,|1,099.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Wheel Chaparral Special Edition Celestial Black 15x7
Miata Wheel Chaparral Special Edition Celestial Black 15x7 Limited Quantities.
The Venerable Chaparral: Perhaps the Best selling replacement wheel for the Miata.
It is time to give that Miata in your driveway the Vintage stance the both of you have been yearning for! The Chaparral S 15's timeless 8-Spoke appearance together with its sporty character is the wheel truly befits the Miata's classic styling cues. But do not let the Chaparral's old school looks and warm charm deceive you; they are produced in state-of-the-art production facilities, using the latest CAD/CAM Manufacturing methods. All Chaparral wheels are crafted by a low-pressure casting process and specially heat-treated for enhanced strength and durability. With Miata specific, 54.1 Hub Center Bore, proper offset and quality that surpasses OEM standards, the Chaparral line offers stunning looks at an affordable price. The Chaparral is one of the best selling replacement wheels for the Mazda Miata. Order a set today!
Click on the photo for a larger view
|,|"Shipping Cost" "add(+$149)"|-||-|||-||WHSPSETOF4|,|20MAMISUANDS4|,|Mazda Miata Wheel Spacers, Set of 4 in Black|,|MC-WPF|,|149.99|,|119.02|,||,||,|0.000 |,||,||,||,| Miata Wheel Spacers, Set of 4
Wheel Spacers - Our light weight Aluminum (6061 T6)wheel spacers are designed to fit snug on the hub and with a little space around the wheel studs to work with the stock studs or upgraded 7/16" wheel studs. Scalloped design to make them as light as possible, yet still giving the wheel a solid surface to sit on between the wheel and the hub.
All wheel spacers are delivered anadized in black or red in 1/4", 1/2", 3/8", and now 1" width. Other colors may be available.
Price is for a quantity of 4.
* It is highly reccommended to use new longer length wheel studs with wheel spacers thicker than 1/4" to ensure proper torque ratings are achieved.
Based on the new 2009 Wheel Spacer rule in the GCR you can run different sizes on the front and the rear as long as they are the same from side to side. 13mm =.512 which is just a tiny bit over a 1/2".
These Mazda Miata Wheel Spacers are no longer available in Red. These come now only in Black.
|,|Color "Black"|-||-|Size "5mm" "1/4 inch" "3/8 inch add(+$30)" "1/2 inch add(+$60)"|-||-|||-||DG-WIDE-BODY-NB|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Wide Body 1999-2005|,|DGM-50-63-5220|,|1,525.00|,|1,295.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Wide Body 1999-2005
This wide body kit consists of four flares and four flare extensions that bond to the original bumpers, or aftermarket bumpers similar to the stock ones. The extensions start from approximately halfway through the side marker lights. The rear pieces are add-on flares, but the front pieces are new fenders. This kit is thick enough for daily use. You can run big rubber or simply give your car the stance to back up a supercharged engine. This kit consists of two complete front fenders, two partial rear fenders, two front and two rear bumper extensions. Instructions are included and are also available to download. Manufactured here at DG Motorsports. Finish is gel coat fiberglass, ready to prep and paint.
Make/Model/Years this part fits - Mazda Miata/MX-5, 1999-2005
Material - Hand Laid Fiberglass
|,|"Freight Cost" "add(+$495)"|-||-|||-||CM-FF1-NC|,||,|Mazda Miata Wide Overfenders Kit 2006-2015|,|CM-FF1-NC|,|695.50|,|595.90|,||,||,||,||,||,||,|Mazda Miata Wide Overfenders Kit 2006-2015
These rear and front overfenders fits perfectly on your existing fenders. Made with high quality fiberglass or carbon fiber/carbon kevlar, they are perfect for people willing to run wider wheels (+45MM in the rear, + 35MM in the front).
They also give a unique style to your Roadster: Wider, meaner, more agressive.
Specifications:
– Fits on existing fenders – 8 pieces kit with full structure
– Can be riveted on for a raw racing look
– Allow you to run 9J or even 10J wheels (17×9 ET28/17 Work Emotion Kiwami wheels pictured)
– Made on our NC2 so the front pieces that fit on the front bumper might need some work if fitted on a NC1 or NC3
|,|"Select Option" "Carbon Fiber add(+$800)" "Carbon Kevlar add(+$900)" "Fiberglass"|-||-|"Shipping Cost" "add (+$140)|-||-|||-||MAMIWI11ULHP|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Wilwood 11" Ultralite HP 30 Vane Replacement Rotor|,|WWB-160-5840|,|189.95|,|129.02|,||,||,|0.000 |,||,||,||,|Ultra-Light ULHP straight vane rotors provide high value performance and rugged durability for a wide range of competition, high performance, and sport driving applications. Do not confuse these rotors with bargain priced off-brand named parts. Wilwoods modern manufacturing capability, combined with large scale economics, make it possible to offer this level of quality and performance at such an affordable price.
Every Wilwood rotor is cast from premium grade, long grain carbon iron. This material exhibits long wear, high thermal stability, and excellent resistance to distortion in high heat. Modern foundry and machining techniques hold close tolerances on face and vane thickness. Combining the correct face thickness with a 30 vane casting provides superior heat management and long service life with low rotating and unsprung weight. The straight vane design also makes it possible to use the same rotor on left or right hand mounting locations.
ULHP series rotors provide the additional performance and smoother operation of precision machined faces with less than .001" variation in flatness, parallelism, and run-out.
Compatible only with the Mazda Miata Wilwood Big Brake Kit*
|,|||-||140-14316|,|NEW|,|Mazda Miata Wilwood Forged Dynalite Big Brake Front Brake Kit - RACE 1990-2005|,|WWB-140-14316|,|1,574.60|,|1,239.95|,||,||,||,||,||,||,|Mazda Miata Wilwood Front Forged Dynalite Big Brake Front Brake Kit - RACE 1990-2005
*NOTE: Brake Line Kit 220-11751 is included in this Brake Kit.
Forged Dynalite Big Brake Front Brake Kit (Race)
The components in this kit have been selected to deliver consistent start to finish performance on vehicles built for dedicated road course competition. No detail has been overlooked. Forged aluminum Dynalite-ST calipers, fortified with Thermlock® pistons and internal knock-back damping springs, provide high efficiency clamping force, unsurpassed heat management, and the piston retraction control that all contribute to a firm and consistent pedal through any event. Oversized 11" diameter Spec37 alloy GT series 72 vane two-piece rotor assemblies mount to the OE hub with aluminum hats adding overall system brake leverage, cooling capacity, and thermal stability in this compact yet sturdy weight saving configuration. The performance package is capped with high friction, high temperature, and long wearing Wilwood PolyMatrix H compound race pads. All premium grade fastener kits include rotor bolts and caliper to mount bracket bolts that are pre-drilled for safety lock wire.
*This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.
Wilwood Forged Dynalite Big Brake Front Brake Kit (Race) - Type III Ano Caliper - GT Slotted Rotor
|,|"Wilwood stainless steel brake line kit" "Select Here" "Yes add(+$89)"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||140-13380|,|NEW|,|Mazda Miata Wilwood Forged Dynapro 6 Big Brake Front Brake Kit - HAT 1990-2005|,|WWB-140-13380|,|1,375.95|,|1,019.95|,||,||,||,||,||,||,|Mazda Miata Wilwood Forged Dynapro 6 Big Brake Front Brake Kit - HAT 1990-2005
Forged Dynapro 6 Big Brake Front Brake Kit (Hat)
Forged Billet Dynapro 6 calipers, oversized GT Spec-37 rotors, and high performance Wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts. These kits are the perfect complement to wheel, tire, and suspension upgrades. Options for caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines. Each kit is engineered specific for each vehicle. They are fully compatible with OE master cylinder output while retaining the full factory ABS functions.
|,|"Do you want a Brake Line Kit" "Yes add(+$89)" "No"|-||-|"Select Calipers Color" " Select Here" "Black Calipers" "Red Calipers"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||MAMIWIBIGBRK|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Wilwood Front Big Brake Kit WITH Wilwood Stainless Steel Brake Lines 1990-2005 - SALE |,|WWB-140-11704|,|1,079.99|,|819.02|,||,||,|5.000 |,||,||,||,|Mazda Miata Wilwood Front Big Brake Kit WITH Wilwood Stainless Steel Brake Lines 1990-2005
Kit Features:
• Specifically designed for the 1995-2005 Mazda Miata with or without ABS brakes
• Billet Forged 4-piston Dynalite calipers available in Wilwood’s exclusive Platinum-E, black or red powder coat finish
• 11.00” diameter HP plain face or SRP drilled and slotted
rotors
• CNC machined aluminum rotor hats
• BP-10 compound brake pads
Forged Billet Dynalite Calipers
The Big Brake Kit for the Miata features race proven Billet Dynalite four piston calipers. These calipers provide big clamping power in a truly lightweight, ridig and reliable design. Four stainless steel pistons provide additional corrosion resistance and the lowest heat transfer of any one-piece piston design. Forged billet Dynalite calipers, oversized rotors, and high performance Wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts. These kits are the perfect compliment to wheel, tire, and suspension upgrades. Options for caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines. Each kit is engineered specific for each vehicle. They are fully compatible with OE master cylinder output while retaining the full factory ABS functions.
Rotor Characteristics
Braking power is radically improved again with the larger 11.00" diameter disc rotors. Compared to the stock rotors, brake leverage is increased by as much as 10% with the larger O.D. The .81" thick, vented fin design is the perfect balance between weight and cooling area for outstanding reliability and fade free performance in the toughest conditions.
HP Series Plain Face Performance Rotors
HP Series rotors provide high performance and rugged durability for a wide range of competition, performance, and sport driving applications. Every Wilwood rotor is cast from premium grade, long grain carbon iron. This material exhibits long wear, high thermal stability, and excellent resistance to distortion in high heat. Modern foundry and machining techniques hold close tolerances on face and vane thickness. The 30 vane casting design provides superior heat management and long service life with low rotating and
unsprung weight.
SRP Series Drilled Performance Rotors
SRP series cross-drilled and face-slotted for improved brake feel and pad performance over the full range of light to severe braking. Along with an additional reduction in rotating and unsprung suspension weight, the venting action of holes and the cleaning action of the slots will reduce pad glazing as well as surface heat and minimize uneven pad compound build-up on the rotor faces. After machining, each rotor gets an e-coat bath to prevent corrosion and preserve the stylish look inside the wheel.
BP-10 Brake Pads
BP-10 Brake Pads for the front calipers provide fast response with high resistance to fade, long wear, and the low rotor abrasion that BP-10 material is so well known for its formula. Developed for improved stopping power, ultra-quiet engagement, and the lowest possible dusting available from a performance compound pad. BP-10 provides quiet, consistent stops over a wide temperature without
all the annoying dust on the wheels. BP-10 materials have an easy break-in period and are easily bedded on new cast iron rotors.
Plumbing and Hardware
Installation is simple. The kit is a complete bolt-on without the need to modify any of the stock brake or suspension components. Billet aluminum mounting brackets, aluminum hats and premium grade hardware are supplied with detailed instructions in every kit.
*Kit includes Wilwood Stainless Steel Brake line kit.
|,|"Select Kit" "Select Here"
"Black Powder Coat/Undrilled"
"Black Powder Coat/Drilled & Slotted add(+$130)"
"Red Powder Coat/Undrilled"
"Red Powder Coat/Drilled & Slotted add(+$130)"|-||-|"Wilwood stainless steel brake line kit" "Select Here" "Yes add(+$89)"|-||-|"Shipping Cost" "add(+$105)"|-||-|||-||WW-150-8850K|,|19MAMIBRROBR1|,|Mazda Miata Wilwood Front Big Brake Kit - Brake Pads 1990-2005|,|WW-150-8850k|,|72.95|,|59.94|,||,||,||,||,||,||,|Mazda Miata Wilwood Front Big Brake Kit - Street Performance / Racing Pads 1990-2005
- Street Performance / Racing Pads I (150-8850K) - Peak Temperture Rating: 800 to 900 F, Peak Friction Rating: 0.46
- Street Performance / Racing Pads II (150-9413K) - Peak Temperture Rating: 1100 F, Peak Friction Rating: 0.55
- High-Temperature Racing Pads I (150-14771K) - Peak Temperture Rating: 1300+ F.
- High-Temperature Racing Pads II (150-12243K) - Peak Temperture Rating: 1300+ F.
Temperature range and overall friction value are the primary considerations for pad selection. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. Then, overall wear rate must be considered. For most asphalt and road race applications, compounds in the high temperature ranges over 1000°F range are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges, and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. If pad fade (friction loss) due to overheating occurs, then improved cooling, a heavier rotor, or a higher temperature range pad may all become necessary.
|,|"Select Option" "Select Here" "Street Performance / Racing Pads I" "Street Performance / Racing Pads II add(+$15)" "High-Temperature Racing Pads I add(+$70)" "High-Temperature Racing Pads II add(+$80)"|-||-|||-||MAMIWISTSTBR|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Wilwood Stainless Steel Brake Line Kit|,|WWB-220-11751|,|79.99|,|69.95|,||,||,|0.000 |,||,||,||,|Wilwood’s stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.
*Only works with Wilwood Big Brake Kits
|,|||-||MIWISTBYCO1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata Wind Stop (1990-2005)|,|CBT-904-151|,|279.99|,|239.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Wind Stop (1990-2005)
Driving your Mazda Miata doesn’t need to be a hair raising event.
The Mazda Miata wind stop helps eliminate the wind buffeting that takes the fun out of going topless. Now you can have conversations instead of shouting matches.
There is no need to remove the wind stop to put the convertible top up or down, it is hinged to effortlessly fold up and down.
Quality manufactured using an aluminum frame with a mesh insert, this unit installs in minutes.
|,|||-||GARAGE-STAR-WIPER-COWL|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata Windshield Wiper Cowl 1990-2005|,|MS-909-945|,|139.45|,|114.98|,||,||,|0.000 |,||,||,||,|Mazda Miata Windshield Wiper Cowl 1990-2005
Add a clean look to your engine compartment and keep engine smells out of your passenger compartment with this stainless steel windshield cowl cover. Engine heat will remain in the bay and not heat your interior. Vents in the panel allow for cool, fresh air to flow into the passenger compartment, while the panel keeps engine smells out. Another smart design from Jass Performance!
|,|||-||906-110-906-120|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata Wood Gearshift Knob for Manual Transmission 1990-2018+|,|906-110|,|35.95|,|29.98|,||,||,||,||,||,||,|Mazda Miata Wood Gearshift Knob for Manual Transmission 1990-2018+
Add classic style to your Miata with a wood shift knob. Made from rosewood just like our steering wheels and e-brake handle, the variation in tone and grain in this natural product means there will be a difference in the appearance.
|,|||-||906-120|,|NBINKN|,|Mazda Miata Wood Parking Brake Handle 1990-2005|,|906-120|,|35.75|,|29.98|,||,||,||,||,||,||,|Mazda Miata Wood Parking Brake Handle 1990-2005
Add classic style to your Miata with a wooden e-brake handle. Made from rosewood just like our steering wheels and shift knobs, the variation in tone and grain in this natural product means there will be a difference in the appearance.
|,|||-||WORKS-BELL-BOSS-STEERING-WHEEL-HUB|,|NBINSTWH|,|Mazda Miata Works Bell Boss Steering Wheel Hub 1990-2014 |,|works-bell-boss-steering-wheel-hub|,|295.99|,|209.55|,||,||,||,||,||,||,|Mazda Miata Works Bell Boss Steering Wheel Hub 1990-2014
Description:
This standard length hub is 75mm. This is the most famous original boss hub company from Japan. Works Bell has an awesome history of great quality as well as price. These hub boss kits will let you install an aftermarket wheel on your car without major modification or permanent damage to your car.Its fully reversible, and even comes with the air bag defeat.
Application:
Mazda Miata 89-97 (NA), Mazda Miata 99-05 (NB), Mazda Miata 06-14(NC) (AIRBAG EQUIPPED VEHICLES FROM FACTORY)
-Best quality hub made for Miata (FULL CNC ALUMINUM, NO WELDS)
***OVER TORQUE DURING INSTALLATION MAY CAUSE PERMANENT DAMAGE TO THIS HUB
-Looks great
-Perfect fit
-Easy to install!
-Plug and play version with Airbag defeat(cancels srs light)
-Reversible
-Includes horn ring(optional use)
-Includes hardware and tool
=======================================
Product information
Universal Hub Kit is the product to pass Japanese automobile safety inspection. Now in the automobile parts industry, it occurs to loosen the automobile discipline and advance free. But it needs for customer to choice the correct products. For example, it is obliged that the automobile safety is under management for customer. It is no easy
that choose goods correctly among huge market. So it advances free, in WORKS BELL we willingly decided our goods to pass Japanese automobile safety inspection. We review what boss should be using data about know-how, strength and safety we save, to guarantee the quality of our products. For example, the accuracy and shape of boss to fix steering wheel surely, the possibility of secondary damage by the cause a driver crash against a steering wheel in an accident and the material to extend its life through attention of corrosion and fatigue, etc. We don’t change its design again, but develop its traditional design as self regulations. Our products have high quality and design so that it could relieve you. This is a Universal Hub Kit produced by WORKS BELL to pass Japanese automobile safety inspection.
Airbag BOSS
You can detach airbag that rises a rate of attachment in recent years, and attach a steering wheel as you like. In use of dummy resistance that attaches Universal Hub Kit for airbag, you can turn off the airbag indicator.
※Some car can’t turn off the airbag indicator
**REMOVAL OR SRS EQUIPMENT SUCH AS AIRBAG MAY BE ILLEGAL IN YOUR AREA, PLEASE VERIFY THIS FOR STREET USE, THIS IS FOR OFFROAD USE.
|,|"Select Year" "Select Here" "1990-1997 Mazda Miata NA w/ Airbag" "1999-2005 Mazda Miata NB w/ Airbag" "2006-2014 Mazda MX-5 NC w/ Airbag"|-||-|"Drop ship fee" "add(+$9)"|-||-|||-||MAZDA-MIATA-WW-STYLE-WING-W-CORNER-TRUNK-PEDESTALS-1990-1997|,|SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|Mazda Miata WW Style Wing W/Corner Trunk Pedestals 1990-1997|,|49620|,|265.00|,|239.00|,||,||,|0.000 |,||,||,||,|Mazda Miata WW Style Wing W/Corner Trunk Pedestals 1990-1997
1990-1997 Mazda Miata WW Style Wing W/Corner Trunk Pedestals. Manufactured by Wings West, a pioneer in polyurethane bodykit manufacturing and design. Parts with part numbers that begin with the prefix 89 are made out of durable, flexible polyurethane. While parts with part numbers that begin with the prefix 59 or 49 are made out of multi-layer fiberglass. Wings West parts are made in USA. Professional installation required. Picture shown is for illustration purpose only. Actual product may vary due to product enhancement. Modification of part is required to ensure proper fitment. Test fit all parts before any modification or painting. Accessories like fog lights, driving lights, splitter, canards, add-on lip, intake scoops, or other enhancement products are not included unless specified in the product description.
Intended fro OFF ROAD use only.
|,|"Freight Cost" "add(+$129.00)"|-||-|||-||MAMIXTWHMUBY|,|NAEXLI|,|Mazda Miata XTREME WHITE MULTIMARKER by PIAA|,|PIAA-19105|,|75.00|,|65.00|,||,||,|0.000 |,||,||,||,| Mazda Miata PIAA lights
Xtreme white bulbs. 4150K rating. Encased housing with PIAA extreme bulbs. City light. Sold in pairs. Can be mounted in bumpers, under dashes, in grills, glove boxes, center consoles, amp and speaker boxes, you name it!
|,|||-||XXR-WHEELS-FASTENERS|,||,|Mazda Miata XXR Wheels Fasteners|,|xxr-wheels-fasteners|,|36.95|,|28.99|,||,||,||,||,||,||,|Mazda Miata XXR Wheels Fasteners
Colors available: Blue, Red, and Black Aluminum Tips. All with white logo as pictured.
Sizes available: 12mm x 1.25 and 12mm x 1.50
Including 20 fasteners, 1 key
|,|"Select Sizes" "12mm x 1.25" "12mm x 1.50"|-||-|"Select Color" "Blue" "Red" "Black Aluminum"|-||-|||-||MAZDA-MIATA-ZOOM-BACK-LAMP-KIT|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Miata Zoom Back Lamp Kit|,|mazda-miata-zoom-back-lamp-kit|,|144.99|,|119.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Back Lamp Kit
Product from JAPAN made by ZOOM ENGINEERING. Nice addition for those running a center or left exit exhaust.
• No cutting to the body needed
• Retro looking
• Red version can also be used as a fog lamp
• Only available for NA Miata (1989-1997) and NB Miata (1999-2005)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)"|-||-|"Options" "Round Clear" "Round Red" "Square Clear"|-||-|||-||MAZDA-MIATA-ZOOM-DOOR-STORAGE-POCKETS|,|NASEATSDOOR|,|Mazda Miata ZOOM Door Storage Pockets|,|mazda-miata-zoom-door-storage-pockets|,|179.99|,|159.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Door Storage Pockets
Product from JAPAN made by ZOOM. Excellent for having quick access to maps and CDs while on the go or just to have a safe place for a cell phone.
• Easy installation
• High quality construction
• Matches interior leather color
• Fits NA (1989-1997)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Leather Color" "SELECT COLOR" "Black" "Red (NA 1993 Limited)" "Tan (NA)"|-||-|||-||MAZDA-MIATA-ZOOM-ELAN-TAIL-LIGHTS|,|NAEXVIALL|,|Mazda Miata Zoom Elan Tail Lights 1990-1997|,|mazda-miata-zoom-elan-tail-lights|,|899.00|,|789.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Elan Tail Lights 1990-1997
Product from JAPAN made by ZOOM ENGINEERING. Nice addition for those looking for a retro exterior. The item is made from high quality FRP.
• No cutting to the body needed
• Retro looking
• Made of FRP
• Original backup lamp is missing, so new back lamp is
included in the kit
• Only available for NA Miata (1989-1997)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)"|-||-|||-||MAZDA-MIATA-ZOOM-FRONT-GRILL|,|NAEXGRBRA|,|Mazda Miata ZOOM Front Grill 1990-1997|,|mazda-miata-zoom-front-grill|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Front Grill 1990-1997
Product made by ZOOM. Looks great from afar and protects any huge debris from hitting your radiator/condenser.
• Subtle and stylish
• Made from aluminum
• Pops into place using existing bolts.
• Available for NA Miata (1990-1997)
|,|"Application" "SELECT APPLICATION" "NA6CE (90-93)" "NA8C (94-97)"|-||-|||-||MAZDA-MIATA-ZOOM-FRONT-GRILL1|,|NBGRILLANDBRA|,|Mazda Miata ZOOM Front Grill 1990-2005|,|mazda-miata-zoom-front-grill1|,|165.00|,|119.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Front Gril 1990-2005
Product made by ZOOM. Looks great from afar and protects any huge debris from hitting your radiator/condenser.
• Subtle and stylish
• Made from aluminum
• Pops into place using existing bolts.
• Available for NA, NB Miata (1990-2005)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (99-00)" "NB8C-2 (01-05)"|-||-|||-||MAZDA-MIATA-ZOOM-HANDBRAKE-BOOT|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata ZOOM Handbrake Boot|,|mazda-miata-zoom-handbrake-boot|,|109.99|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Handbrake Boot
Product made by Zoom. Subtle and stylish touch to the interior
• Looks great
• Easy installation
• Available for NA Miata (1989-1997), NB Miata (1999-2005) & NC Miata (2006+)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)"|-||-|"Material" "SELECT MATERIAL" "Real Leather add(+$25)" "Synthetic Leather|-||-|"Leather Color" "SELECT COLOR" "Black (Real or Synthetic)" "Blue (Synthetic)" "Red (Real or Synthetic)" "Tan (Real or Synthetic)" "White (Synthetic)" "Yellow (Synthetic)"|-||-|"Stitching Color" "SELECT COLOR" "Black" "Blue" "Red" "White" "Yellow"|-||-|||-||MAZDA-MIATA-ZOOM-HEADLIGHT-AIR-INTAKE-LID|,|NAEXVIALL|,|Mazda Miata ZOOM Headlight Air Intake Lid|,|mazda-miata-zoom-headlight-air-intake-lid|,|224.90|,|189.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Headlight Air Intake Lid
Product made by ZOOM to help engine cooling.
• Made of FRP
• Helps bring more air to the engine bay
• Only available for NA Miata (1989-1997)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Headlight side" "SELECT SIDE" "Driver side (US)" "Passenger side (US)"|-||-|||-||MAZDA-MIATA-ZOOM-HEADLIGHT-AIR-INTAKE-LIDS|,|NAEXVIALL|,|Mazda Miata ZOOM Headlight Air Intake Lids (Pair)|,|mazda-miata-zoom-headlight-air-intake-lids|,|389.00|,|339.00|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Headlight Air Intake Lids
Product made by ZOOM to help engine cooling. Open box (save $50 over regular price) and never used! Will work on NA (1989-1997) Miatas!
• Made of FRP
• Helps bring more air to the engine bay
• Only available for NA Miata (1989-1997)
• Price is for the PAIR
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)"|-||-|||-||MAZDA-MIATA-ZOOM-LED-SIDE-MARKERS|,|20MAMIEXLI|,|Mazda Miata Zoom LED Side Markers|,|mazda-miata-zoom-led-side-markers|,|189.99|,|159.95|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom LED Side Markers
Product from JAPAN made by ZOOM ENGINEERING. Nice addition for those looking for a retro exterior
• Some drilling to the body is required
• Wiring is included
• Lightweight
• Classic and retro with a touch of modern LED
• Only available for NA Miata (1990-1997), NB Miata (1999-2005) and NC Miata (2006-2014)
|,|"Application" "SELECT APPLICATION" "NA6CE (90-93)" "NA8C (94-97)" "NB8C-1 (99-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)"|-||-|"Lense" "SELECT LENSE" "Amber" "Clear"|-||-|||-||ZOOM-MONACO-240-REAR-VIEW-MIRROR|,|NBINVIALL|,|Mazda Miata ZOOM Monaco 240 Rear View Mirror 1990-2016+|,|zoom-monaco-240-rear-view-mirror|,|280.95|,|249.00|,||,||,||,||,||,||,|Mazda Miata ZOOM Monaco 240 Rear View Mirror 1990-2016
The Monaco 240 rear view (room) mirror made by ZOOM Engineering will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 240mm wide, 80mm vertical and 96mm deep. It offers a wider view than OEM mirror for better safety. It also will help reduce glare from cars behind your vehicle.
-Better view than OEM mirror
-Measures 240mm x 80mm x 96mm
-Reduces glare from cars behind
-Includes rear view mirror & mounting arm
-Unique shape
-Fits ALL YEARS Mazda Miata
|,|"Selet Year" "NA6CE (90-93)" "NA8C (94-97)" "NB8C-1 (99-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)" "ND (16+) - With Sensor" "ND (16+) - Without Sensor"|-||-|"Select Finish" "Black" "Black Carbon Fiber add(+$40.00)" "Kevlar Carbon Fiber add(+$40.00)" "Metallic Blue add(+$10.00)" "Metallic Dark Grey add(+$10.00)" "Metallic Silver add(+$10.00)" "Red" "Silver Carbon Fiber add(+$40.00)" "White" "Yellow"|-||-|||-||MAZDA-MIATA-ZOOM-ORIGINAL-METER-HOOD|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Mazda Miata ZOOM Original Meter Hood 1990-1993|,|mazda-miata-zoom-original-meter-hood|,|349.00|,|299.00|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Original Meter Hood
Gauge Hood made by ZOOM to give the NA interior a more 60’s look! It’s only available for right hand drive (RHD) NA6CE vehicles.
• Direct replacement from OEM Gauge Hood
• Looks awesome
• Only available for NA6CE Miata (1989-1993)
|,|"Select Finish" "SELECT FINISH:" "Flat Black" "Black Leather with Black Stitching add(+$200)" "Black Leather with Red Stitching add(+$200)" "Red Leather with Red Stitching add(+$200)" "Tan Leather with Tan Stitching add(+$200)"|-||-|||-||MAZDA-MIATA-ZOOM-OVAL-AERO-REAR-VIEW-MIRROR|,|20MAMIINAC|,|Mazda Miata ZOOM Oval Aero Rear View Mirror|,|mazda-miata-zoom-oval-aero-rear-view-mirror|,|254.99|,|219.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Oval Aero Rear View Mirror
The Oval Aero Rear View (room) mirror made by ZOOM Engineering will fit NA (89-97), NB (98-05), NC (06-15) & ND (2016+) Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 205mm wide, 62mm vertical and 60mm deep. It offers a wider view than OEM mirror for better safety. It also will help reduce glare from cars behind your vehicle using a slightly tinted blue mirror.
-Better view than OEM mirror
-Measures 205mm x 62mm x 60mm
-Reduces glare from cars behind and offers a wider view
-Includes rear view mirror & mounting arm
-Asymmetrical shape
-Fits ALL YEARS Mazda Miata
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)" "ND (16+)"|-||-|"Finish" "SELECT FINISH" "Polished (Chrome)" "White" "Black Carbon Fiber add(+$110)" "Silver Carbon Fiber add(+$110)"|-||-|||-||MAZDA-MIATA-ZOOM-OVAL-COMPACT-REAR-VIEW-MIRROR-1989-1997|,|INSETE|,|Mazda Miata ZOOM Oval Compact Rear View Mirror 1990-2016+|,|mazda-miata-zoom-oval-compact-rear-view-mirror-1989-1997|,|199.99|,|159.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Oval Compact Rear View Mirror 1990-2016+
Product from Japan made by ZOOM. The mirrors use a blue wide angle lens to reduce glare from vehicles headlights.
• Nice change from the OEM plastic rear view mirror
• Stylish
• High quality product from Japan
• Only available for NA Miata (1990-1997)
|,|"Application" "SELECT APPLICATION" "NA6CE (90-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)" "ND (16+) - With Sensor (See Description)" "
ND (16+) - Without Sensor (See Description)"|-||-|"Color" "SELECT COLOR" "Black Carbon Fiber add(+$60.00)" "Polished (Chrome)" "Silver Carbon Fiber add(+$60.00)" "White"|-||-|||-||MAZDA-MIATA-ZOOM-RETRO-FUEL-LID-1989-2005|,|NBFUELLIDS|,|Mazda Miata Zoom Retro Fuel Lid 1990-2005|,|mazda-miata-zoom-retro-fuel-lid-1989-2005|,|285.00|,|259.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Retro Fuel Lid 1990-2005
Add a touch of retro to your exterior with this fuel lid designed by Zoom Engineering of Japan. Made of polished aluminum, it can be installed in 10 minutes using the tools in the kit and requires no cutting to the body. It comes with both brackets, as well as all original screws and hardware. Only available for NA Miata (1989-1997) and NB Miata (1998-2005) models.
• No cutting to the body needed
• Retro looking
• Made of aluminum
• Only available for NA Miata (1990-1997) and NB Miata (1998-2005)
|,|"Application" "SELECT APPLICATION" "NA6CE (90-93)" "NA8C (94-97)" "NB8C-1 (99-00)" "NB8C-2 (01-05)"|-||-|||-||MAZDA-MIATA-ZOOM-SHIFT-BOOT|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda Miata ZOOM Shift Boot|,|mazda-miata-zoom-shift-boot|,|149.95|,|119.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Shift Boot
Product made by Zoom. Subtle and stylish touch to the interior.
• Looks great
• Easy installation
• Available for NA Miata (1989-1997), NB Miata (1999-2005) & NC Miata (2006-2014)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-14)"|-||-|"Material" "SELECT MATERIAL" "Real Leather add(+$25)" "Synthetic Leather"|-||-|"Leather Color" "SELECT COLOR" "Black (Real or Synthetic)" "Red (Real or Synthetic)" "Tan (Real or Synthetic)" "Blue (Synthetic)" "White (Synthetic)" "Yellow (Synthetic)"|-||-|||-||MAZDA-MIATA-ZOOM-SHIFT-KNOB-TYPE-1|,|20MAMIINKN|,|Mazda Miata ZOOM Shift Knob Type-1|,|mazda-miata-zoom-shift-knob-type-1|,|139.99|,|109.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Shift Knob Type-1
Round (ball shape) shift knob made for the Mazda Miata (all years). It has the same size as Ferrari Shift Knob (42.5mm diameter) and is available in many different finishes (polished or anodized).
-Made of stainless steel
-Weights 97g (except for 288g stainless steel version)
-M10x1.25
-Fits ALL YEARS Mazda Miatas
|,|"Finish" "SELECT FINISH" "Black" "Blue" "Polished" "Red"|-||-|||-||MAZDA-MIATA-ZOOM-SIDE-MARKERS|,|20MAMIEXLI|,|Mazda Miata Zoom Side Markers|,|mazda-miata-zoom-side-markers|,|165.00|,|149.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Side Markers
Product from JAPAN made by ZOOM ENGINEERING. Nice addition for those looking for a retro exterior.
• Some drilling to the body is required
• Wiring is included
• Lightweight
• Classic and retro
• Only available for NA Miata (1989-1997), NB Miata (1998-2005) and NC Miata (2006+)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-14)"|-||-|"Lense" "SELECT LENSE" "Amber" "Clear|-||-|||-||MAZDA-MIATA-ZOOM-TYPE-1-CENTER-CONSOLE-1989-1997|,|INSETE|,|Mazda Miata Zoom Type 1 Center Console 1989-1997|,|mazda-miata-zoom-type-1-center-console-1989-1997|,|649.00|,|524.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Type 1 Center Console 1989-1997
Go on your journeys with ease and comfort with a superior quality center console for NA Miata (1989-1997) models. Created for both automatic and manual transmissions, each console has a stylish boots leather color and stitching color for the gear stick and hand break to match your car’s upholstery. Take your pick from black or silver center finish, and rectangular or round shifter hole for manual transmissions.
• Looks great
• Gives a retro look to the interior
• Clean and subtle
• High quality product from Japan
• Only available for NA Miata (1989-1997)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)"|-||-|"Transmission" "SELECT TRANSMISSION" "Automatic" "Manual"|-||-|"Center Finish" "SELECT FINISH" "Black" "Silver"|-||-|"Power Windows Cutout" "SELECT HERE" "No" "Yes"|-||-|"Shifter Hole (Only for Manual Transmission)" "SELECT SHIFTER HOLE" "Rectangular" "Round"|-||-|"Boots Leather Color" "SELECT COLOR" "Black" "Red" "Tan"|-||-|"Boots Stitching Color" "SELECT COLOR" "Black" "Red" "Tan" "White"|-||-|||-||MAZDA-MIATA-ZOOM-TYPE-1-RADIO-CONSOLE-1989-1993|,|INSETE|,|Mazda Miata Zoom Type 1 Radio Console 1989-1993|,|mazda-miata-zoom-type-1-radio-console-1989-1993|,|599.95|,|519.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Type 1 Radio Console 1989-1993
Give your dashboard a retro yet sporty feel with a radio console designed by Zoom Japan for NA6 Miata (1989 to 1993) models (will also fit Right Hand Drive NA8 (1994-1997)). With an excellent fit and high-quality finish, you can enhance and reshape your interior like a pro. Choose from silver or black center finish or 2-gauge and 3-gauge holes. Attach a Zoom Ventilation Cup Holder to make your interior even more striking.
• Looks great
• Gives a retro look to the interior
• Clean and sporty
• High quality product from Japan
• Only available for NA Miata (1989-1993)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)"|-||-|"Center Finish" "SELECT FINISH" "Black" "Silver"|-||-|"Top Gauge Holes" "SELECT HOLES" "2" "3"|-||-|||-||MAZDA-MIATA-ZOOM-PUSH-STARTER-BUTTON-1989-1997|,|INSETE|,|Mazda Miata ZOOM Type-2 Push Start Button 1990-1997|,|mazda-miata-zoom-push-starter-button-1989-1997|,|179.99|,|149.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Type-2 Push Start Button 1990-1997
Start your NA (1989-1997) MX-5 Miata with a push of a button with the starter button from Zoom Japan. Very unique and easy to install, it’s an upgraded version of their original Push Start Button. Choose from 3 buttons colors. It is a plug and play item that installs in only a matter of minutes.
• Subtle and stylish
• No drilling required
• Installs in OEM buttons accessory location
• High quality parts from Japan
• Only available for NA (1989-1997) Miatas
|,|"Application" "Select Here" "NA6CE (90-93)" "NA8C (94-97)"|-||-|"Button Color" "Select Here" "Blue" "Red" "Grey"|-||-|||-||MAZDA-MIATA-ZOOM-TYPE-2-SHIFT-KNOB|,|20MAMIINKN|,|Mazda Miata ZOOM Type-2 Shift Knob|,|mazda-miata-zoom-type-2-shift-knob|,|139.99|,|129.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Type-2 Shift Knob
Round shift knob with bottom neck made for the Mazda Miata (all years). It has the same size as Ferrari Shift Knob (42.5mm diameter and height of 49.5mm) and is available in many different finishes (polished or anodized). Made of aluminum and weights about 100g.
-Made of stainless steel
-M10x1.25
-Fits ALL YEARS Mazda Miatas
|,|"Finish" "Select Finish" "Black" "Blue" "Polished" "Red"|-||-|||-||MAZDA-MIATA-ZOOM-TYPE1-PEDAL-KIT-1989-2005|,|NBINPE|,|Mazda Miata Zoom Type1 Pedal Kit 1989-2005|,|mazda-miata-zoom-type1-pedal-kit-1989-2005|,|274.99|,|224.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Type1 Pedal Kit 1989-2005
Neat pedal kit made by ZOOM. It comes with a dead pedal and 3 pedals (gas, brake & clutch). It provides better grip than OEM pedals and also looks much better.
• Made of aluminum
• High quality product from Japan
• Provides good grip
• Available for NA (1989-1997) & NB (1998-2005) Miata
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)"|-||-|"Transmission" "Manual"|-||-|||-||MAZDA-MIATA-ZOOM-TYPE2-RADIO-CONSOLE-1989-1993|,|INSETE|,|Mazda Miata Zoom Type2 Radio Console 1989-1993|,|mazda-miata-zoom-type2-radio-console-1989-1993|,|649.99|,|529.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Type2 Radio Console 1989-1993
The Zoom Type-2 Radio Console is the same as Zoom Type 1 Radio Console, but leather covered. It’s available in Black, Red or Tan color. Many customization are available.
• Looks great
• Gives a retro look to the interior
• Clean and sporty
• High quality product from Japan
• Only available for NA Miata (1989-1993)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)"|-||-|"Leather Color" "SELECT COLOR" "Black" "Red" "Tan"|-||-|"Center Finish" "SELECT FINISH" "Black" "Silver"|-||-|"Top Gauge Holes" "SELECT HOLES" "0" "2" "3"|-||-|||-||MAZDA-MIATA-ZOOM-VENTILATION-CUP-HOLDER|,|20MAMIINAC|,|Mazda Miata Zoom Ventilation Cup Holder|,|mazda-miata-zoom-ventilation-cup-holder|,|99.99|,|84.99|,||,||,|0.000 |,||,||,||,|Mazda Miata Zoom Ventilation Cup Holder
Drive your Miata MX5 in style with a modern and futuristic vent cup holder from Zoom Engineering. Attach them easily to your vent slat and fins and keep your favorite drink cold and steady while driving. They come in handy especially for cars with no built-in cup holders. Stylish, subtle and easily removable, these cup holders come in 6 colors to match your car interior and personality. Only available for Miata models from all years.
• Looks great
• Very useful for cars without cup holders
• Clean and subtle
• Can be easily removed
• High quality product from Japan
• Only available for ALL YEARS Miatas
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)" "ND (16+)"|-||-|"Color" "SELECT COLOR" "Black" "Blue" "Gunmetal" "Polished" "Red" "Silver" "Titanium"|-||-|||-||MAZDA-MIATA-ZOOM-WIDE-BLUE-MIRRORS-2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda Miata ZOOM Wide Blue Mirrors ND 2016+|,|mazda-miata-zoom-wide-blue-mirrors-2016|,|229.00|,|189.02|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Wide Blue Mirrors ND 2016+
Wide Angle Side View Mirrors made by ZOOM in Japan for the 2016+ ND Miata! It’ll remove the dead angles caused by the soft top roof and improve safety while driving as well as reduce glare from following cars.
-Easy to install
-Wide angle for a better view
-Anti-glare mirror
-Price is for a pair of (2) mirrors
-Made for ND (2016+) Miata
|,|"Application" "Select Here" "ND (2016+)"|-||-|"Blind Spot Monitoring Equipped Vehicle" "Select Here" "Yes add(+$25)" "No"|-||-|||-||MAZDA-MIATA-ZOOM-WIDE-BLUE-REAR-VIEW-MIRROR-1989-2005|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Mazda Miata ZOOM Wide Blue Rear View Mirror 1989-2005|,|mazda-miata-zoom-wide-blue-rear-view-mirror-1989-2005|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|Mazda Miata ZOOM Wide Blue Rear View Mirror 1989-2005
Wide Rear View Mirror made by ZOOM Engineering for the NA or NB MX-5 (1989-2005). It’s made to reduce glare from vehicles from the behind but also give a better view angle from the driver. It makes the vehicle much safer and convenient to drive.
-Easy to install
-Improves safety
-Only available for NA, NB (1989-2005)
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)"|-||-|||-||MAZDA-MX-5-MIATA-AXLE-BACK-EXHAUST-SYSTEM|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX 5 Miata Axle Back Exhaust System 2015+|,|MR-ABE-MMX515|,|499.99|,|413.95|,||,||,|10.000 |,||,||,||,|Mazda MX 5 Miata Axle Back Exhaust System 2015+
Designed as a direct bolt-on to replace the stock piece, this axle-back system works in conjunction with the OEM Mid-Pipe and is easy to install within minutes.
Constructed of T-304 Stainless Steel and polished to a mirror finish, this Axle-Back system offers free-flowing performance over your OEM restrictive exhaust system. Being constructed of Stainless-Steel, this exhaust piece is much more lighter than your OEM system and offers increased Power:Weight ratio that plays an important role in your cars handling and performance.
- 2.5" Piping
- Single 3" Stainless Roll Tip Design
NOTE: All These Racing Exhaust System is deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MX-5-MIATA--TRUNK-COVER-2006-2014|,||,|Mazda MX 5 Miata Custom Trunk Cover 2006-2014|,|LD-TC1-NC|,|199.99|,|138.95|,||,||,|0.000 |,||,||,||,|Mazda MX 5 Miata Custom Trunk Cover 2006-2014
Availability: 6-8 weeks production time
This Mazda MX-5 Miata trunk cover fits inside the trunk of your MX-5 Miata years 2006-2014. It will give a nice look to your interior but also reduce the noise getting in the passenger compartment.
- High quality material
- Waterproof
- Washable very easily
- Scratch resistant
|,|"Color" "Please Select" "Classic Black" "Classic Black and Red" "Saddle Brown" "Saddle Brown Rice" "Sweet Rice" "The Sun Orange"|-||-|"Shipping Cost" "add(+$49)"|-||-|||-||MAZDA-MX-5-MIATA-CUSTOM-TRUNK-COVER-2015|,||,|Mazda MX 5 Miata Custom Trunk Cover 2015+|,|LD-TC1-ND|,|199.99|,|138.95|,||,||,||,||,||,||,|Mazda MX 5 Miata Custom Trunk Cover 2015+
Availability: 6-8 weeks production time
This Mazda MX-5 Miata trunk cover fits inside the trunk of your MX-5 Miata years 2015+. It will give a nice look to your interior but also reduce the noise getting in the passenger compartment.
- High quality material
- Waterproof
- Washable very easily
- Scratch resistant
|,|"Color" "Please Select" "Classic Black" "Classic Black and Red" "Saddle Brown" "Saddle Brown Rice" "Sweet Rice" "The Sun Orange"|-||-|"Shipping Cost" "add(+$45)"|-||-|||-||MAZDA-MX-5-MIATA-DUCKTAIL-TRUNK-SPOILER-2016|,||,|Mazda MX 5 Miata Ducktail Trunk Spoiler 2016+|,|CM-TS2-ND-X|,|299.99|,|224.99|,||,||,||,||,||,||,|Mazda MX 5 Miata Ducktail Trunk Spoiler 2016+
This carbon fiber ducktail spoiler has a unique design matching the Miata Mx-5 line and gives the back of your car a very aggressive touch.
The carbon fiber version is pictured in those shots.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
*Availability: 30 - 40 days production time
|,|"Material" "Please Select" "Fiberglass" "Carbon Fiber add(+$130)" "Kevlar add(+$140)"|-||-|"Shipping Cost" "add(+$55)"|-||-|||-||MAZDA-MX-5-MIATA-EXTREME-TRUNK-SPOILER-FOR-PRHT-NC|,||,|Mazda MX 5 Miata Extreme Trunk Spoiler for PRHT 2006-2014|,|CM-TS3-NC|,|279.99|,||,||,||,|0.000 |,||,||,||,|Mazda MX 5 Miata Extreme Trunk Spoiler for PRHT 2006-2014
This spoiler only fits the NC WITH PRHT.
This extreme carbon fiber trunk spoiler has been designed to make the rear of the car much more aggressive. The 2 "legs" follow the license plate recess nicely.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
- High grade 3M double side adhesive supplied with each spoiler
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
This item is considered as bulky by the express companies so it can take more time to be delivered to you.
|,|"Material" "Please Select" "Fiberglass" "Carbon Fiber add(+$130.00)" "Kevlar add(+$160.00)"|-||-|"Shipping Cost" "add(+$69.00)"|-||-|||-||MAZDA-MX-5-MIATA-FRONT-BRAKE-COOLING-DUCT-KIT-2006-2008|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX 5 Miata Front Brake Cooling Duct Kit 2006-2015|,|M5606-KT|,|519.99|,|470.00|,||,||,|0.000 |,||,||,||,|Mazda MX 5 Miata Front Brake Cooling Duct Kit 2006-2009
Product Description
Brake cooling duct kit includes 1 each left and right steel powder coated brake ducts for the hub, 2 sections of 2. 5 inch silicone -neoprene hose, 4 hose clamps, 2 front nose ducts and installation instructions.
Weight: 5.00 Lbs
|,|"Select Year" "Select Here" "2006-2008" "2009-2012" "2013-2015 add(+$40)"|-||-|||-||MAZDA-MX-5-MIATA-OEM-WHEEL-ACCESSORIES-2006-2015|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2006-2012|,|Mazda MX--5 Miata OEM Wheel Accessories 2006-2015|,||,||,||,||,||,||,||,||,||,||,|||-||ROLL-BAR-COVERS|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Carbon Fiber Roll Bar Covers (Rear) 2006-2015|,|CMC-BC1-NC|,|699.00|,|525.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Roll Bar Covers (Rear) 2006-2015
Those carbon fiber roll bar covers replace the plastic ones on all NC models.
This listing is for the rear covers only. Front covers will be added to the website shortly. You can fit the plastic front covers with the rear carbon fiber without any problem.
Price is for a pair.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fiber using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
|,|"Material" "Carbon Fiber"|-||-|"EMS Shipping Cost" "add (+$75.00)"|-||-|||-||ALI-ROLLBAR|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Carbon Fiber Roll Bar Covers (Rear) 2016-ON|,|Carbon-906-422|,|419.00|,|299.00|,||,||,||,||,||,||,|Mazda MX-5 Carbon Fiber Roll Bar Covers (Rear) 2016-ON
Those carbon fiber roll bar covers replace the plastic ones on all ND models.
This listing is for the rear and front covers.
Price is for a pair.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
PRICE FOR FAIR
|,|||-||904-515|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Chrome Roll Bar Covers (Rear) 2006-2023|,|904-515|,|135.05|,|89.95|,||,||,||,||,||,||,|Mazda MX-5 Chrome Roll Bar Covers (Rear) 2006-2021
Make the statement that you are serious about style with these chrome seatback bar covers.
PRICE FOR PAIR
|,|"Select Year" "Select Here" "2006-2015 add(+$20)" "2016-2023 Silver"|-||-|||-||DP21775|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 EBC GreenStuff 2000 Series Green Sport & Street Brake Pads 2016+ |,|DP21775|,|129.05|,|86.09|,||,||,||,||,||,||,|Mazda MX-5 EBC GreenStuff 2000 Series Green Sport & Street Brake Pads 2016+
GreenStuff ™ 2000 series for sport compact and hot hatches
Upgrade pad for sport compact improves brake effect 10-20%.
Medium dusting factor makes these cleaner pads than stock.
Capable of repeated heavy brake use without brake “Fall-Off”.
Very minimal disc/rotor damage characteristics.
Suitable for all sport compact in highway use.
Superb brake control and pedal response full grade better than stock.
Minimal dusting features makes this a clean pad compound.
Features red ‘brake in’ surface coating for instant safe braking after install.
EBC Greenstuff™ has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a no dust pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars we strongly recommend RedStuff which does offer much less dust.
DP22263 w/o Brembo F
DP21775 w/o Brembo R
DP22286 with Brembo F
DP21775 with Brembo R
|,|"Select Location" "Select Here" "Front add(+$20)" "Rear"|-||-|"Select Submodel" "Select Here" "W/O Brembo Brake" "With Brembo Brake add(+$59)"|-||-|||-||DP31775C|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 EBC RedStuff 3000 Series Ceramic Sport Red Race Brake Pads 2016+|,|DP31775C|,|152.05|,|113.05|,||,||,||,||,||,||,|Mazda MX-5 EBC RedStuff 3000 Series Ceramic Sport Red Race Brake Pads 2016+
RedStuff™ 3000 series ceramic sport and race
RedStuff ceramic brake pads, passenger car/saloon car pad NOT made for Truck or SUV fitments.
EBC lowest dust fast street pad with 15% brake improvement.
Capable of repeated heavy brake use without brake “Fall-Off”.
Very minimal disc/rotor damage characteristics.
Superb material for Prestige imports/European and Asian cars.
ECE R 90 type approved for most cars.
Features red ‘brake in’ surface coating for instant safe braking after install.
As EBC’s flagship street brake pad material for prestige and faster cars, EBC RedStuff ceramic Brake pads sets new standards in brake performance. RedStuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad “Pick up” or disc scoring and reduced dust even further.
Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early RedStuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
|,|"Select Location" "Select Here" "Front add(+$35)" "Rear"|-||-|"Select Submodel" "Select Here" "W/O Brembo Brake" "With Brembo Brake add(+$69)"|-||-|||-||UD1180|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 EBC Ultimax2 Premium General Replacement Brake Pads 2016+ |,|UD1180|,|107.63|,|89.02|,||,||,||,||,||,||,|Mazda MX-5 EBC Ultimax2 Premium General Replacement Brake Pads 2016+
Ultimax™ Brake Pads
Superb daily driver R90 type approved pad.
New 100% ECO friendly material with zero sulphides.
No shims for noise reduction needed.
More bite from cold.
Works in hot and dry climates as well as in cold.
Fully R 90 approved as was the original Ultimax grade.
Features red “brake in’ surface coating for instant safe braking after install.
The Ultimax2™ brake pad will replace the original Ultimax predecessor material on a stock rotation basis.
If you simply need a quality OEM replacement pad, look no further than the Ultimax2™ brake pad. Made in the UK Bristol EBC Brakes manufacturing plant the Ultimax2™ brake pad is a beautifully engineered brake compound that lasts well, produces minimal dust and is the perfect choice for the urban or daily driver. Why spend more if all you need is a quality replacement pad?
The Ultimax2™ brake pad is a total NON METALLIC pad containing ZERO steel fibre making this a cleaner pad far less aggressive to cast iron brake rotors.
Ultimax2™ has also been graded Code “N” by the USA brake ratings system meaning this receives the TOP award for its environmentally friendly status and has also achieved the much coveted GG friction rating, almost unheard of in the automotive brake Industry.
This equates to a clean pad, that lasts longer, extends disc life and emits ZERO toxicity and is a true pad for the future. The brake effect with the GG ratting is truly amazing and delivers powerful braking at first brake application. Ultimax2™ has also been widely tested in cold and damp conditions in Northern Europe and Scandinavia and in the Caribbean hot and humid temperatures where brake noise was zero.
|,|"Select Location" "Select Here" "Front add(+$15)" "Rear"|-||-|"Select Submodel" "Select Here" "W/O Brembo Brake" "With Brembo Brake add(+$39)"|-||-|||-||DP41775R|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 EBC YellowStuff 4000 Series Street - Race Track Brake Pad Set 2016+ |,|EBC-DP41775R|,|165.75|,|98.99|,||,||,||,||,||,||,|Mazda MX-5 EBC YellowStuff 4000 Series Street - Race Track Brake Pad Set 2016+
YellowStuff™ 4000 series fastest street, race & drift racing
High friction formula improves brake effect 30%.
Zero brake fade makes this material perfect for fastest driving.
Capable of repeated heavy brake use without brake “Fall-Off”.
Very minimal disc/rotor damage characteristics.
Suitable for shorter track events and race use.
Medium hardness material feels good at pedal.
ECE R 90 type approved for most cars.
Features red ‘brake in’ surface coating for instant safe braking after install.
EBC Yellowstuff 1793 compound is a true winner all round, it has high friction from cold, not requiring warm up for street use yet when loaded up and really hot the brakes just get better. Even up to truck weights these pads grip and do not heat fade.
EBC yellows are ECE Brake safety tested which means they must work perfectly from cold at least as good or better than stock pads.
When Yellowstuff see some heat (which is not tested for in the ECE R 90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.
High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade.
Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on high speed Police Vehicle brakes alike.
Rear w/o brembo - DP42263R
|,|"Select Location" "Select Here" "Front add(+$30)" "Rear"|-||-|"Select Submodel" "Select Here" "W/O Brembo Brake" "With Brembo Brake add(+$30)"|-||-|||-||CM-EC1-NC|,|20MIMIEXPA|,|Mazda MX-5 Engine Cover 2006-2014|,|CM-EC1-NC|,|195.00|,|225.00|,||,||,|0.000 |,||,||,||,|Engine Cover
This carbon fiber engine cover replaces the Miata OEM plastic one. Made with high quality carbon fiber, it gives a nice and clean look to your engine bay.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in matte and glossy Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Material" "Glossy Carbon Fiber" "Glossy Carbon Kevlar (+$30)" "Matte Carbon Kevlar (+$30)" "Matte Carbon Fiber"|-||-|"Shipping Cost" "add (+$40.00)|-||-|||-||GT-LIP-ADD-ONS|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 GT Lip add ons|,|CMC-GT1-NC|,|185.00|,|159.00|,||,||,|0.000 |,||,||,||,|GT Lip add ons
These carbon fiber add-ons replace the OEM plastic ones and give a great look to the front of your car. Fitment is very easy.
- Made with high quality carbon fiber for maximum strength.
- Mounts easily over existing bumper.
- Fit on original factory bumper
- Enhance the appearance of your car.
- Super light weight.
Fit NC3 only.
|,|"Material" "Carbon Fiber" "Carbon Kevlar (+$15)"|-||-|"Drop-Shipping fee" "add (+$25)"|-||-|||-||INJSP6010P|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Injen 2.0L 4Cyl Polished Short Ram Intake 2016-2017|,|injSP6010P|,|379.95|,|335.02|,||,||,||,||,||,||,|Mazda MX-5 Injen 2.0L 4Cyl Polished Short Ram Intake 2016-2017
The Injen SP Series Intake systems Feature the Patent Pending MR Technology Process for Optimal Gains and a safe A/F ratio. The Injen SP Series Intake is The Worlds First Tuned Intake System
Description: MAZDA SHORT RAM AIR INTAKE SYSTEM
|,|||-||910-460|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Mesh Wind Blocker 2016-2019|,|910-460|,|177.95|,|159.98|,||,||,||,||,||,||,|Mazda MX-5 Mesh Wind Blocker 2016-2019
This mesh wind blocker is slightly larger than the OEM version, without being large enough to get in that way of putting your top up or down. Steel frame and high-quality, UV resistant nylon-polyester mesh material. Easily installs quickly with velcro.
|,|||-||MAMXMI1ENWOM1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata 1.6: Enthusiast Workshop Manual|,|100-107|,|109.99|,|95.95|,||,||,|0.000 |,||,||,||,|BACK IN STOCK!!! Order now for supplies are limited.
Mazda MX-5 Miata 1.6: Enthusiast Workshop Manual is for 1.6-liter Miatas from years 1989-1994.
The super-manual for Miata owners. The author has personally dismantled and reassembled a Miata, taking step-by-step pictures of all procedures. This, combined with his personal interest in the Miata and his years of writing and editing Haynes manuals, provides the background necessary to write the best Miata shop manual available.
Coverage includes maintenance, repairs, modifications and improvements on all 1.6-liter Miatas from 1989-1994.
|,|||-||MAMXMI1ENWOM|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata 1.8: Enthusiast Workshop Manual|,|100-108|,|109.99|,|95.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata 1.8: Enthusiast's Workshop Manual
The super-manual for Miata owners. The author has personally dismantled and reassembled a Miata, taking step-by-step pictures of all procedures. This, combined with his personal interest in the Miata and his years of writing and editing Haynes manuals, makes him uniquely qualified to write the best Miata 1.8-liter shop manual available to date.
Coverage includes maintenance, repairs, modifications and improvements to all 1.8-liter Miatas from 1994-1999.
|,|||-||MAZDA-MX-5-MIATA-3-POINT-SHOCK-TOWER-BRACE-BY-COBALT|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata 3-Point Shock Tower Brace by Cobalt 2006-2015|,|904-675|,|289.99|,|259.99|,||,||,|5.000 |,||,||,||,|Mazda MX-5 Miata 3-Point Shock Tower Brace by Cobalt 2006-2015
Don’t bother looking for a strut brace that compares with this one. Oval section stainless steel tubing is mated to beautifully crafted tower supports. The welds on this brace are a work of art! Aside from the best craftsmanship available, this brace actually works. Patterned after Le Mans style chassis bracing, this piece mounts in three places including a special bracket that secures it to the firewall. This ensures rigidity that cannot be duplicated by lesser quality braces that simply mount from shock tower to shock tower. Comes complete with instructions and all necessary hardware. Two year warranty.
|,|||-||CARBON-3D-FRONT-CANARDS-NA|,|NAEXVIALL|,|Mazda MX-5 Miata 3D Front Canards 1990-1997|,|CMCF15|,|209.99|,|169.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Front Canards 1999-2005
*Carbon Fiber Pictured
*Availability: 25 - 35 days production time
Those lightweight 3D carbon fiber canards will direct the airflow above the wheels and give you a better aero.
250 grams/set
Perfect fitment on OEM bumper
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Material" "Select Here" "Carbon Fiber" "Carbon Kevlar add(+$100)"|-||-|"Shipping Cost" "add(+$45)"|-||-|||-||5ZPRZZEX20MA|,|20MAMIEXREPA|,|Mazda MX-5 Miata 5Zigen ProRacer ZZ Full Cat-Back NC Exhaust 2006-2015|,|T5Z-PZMA-010|,|930.00|,|785.00|,||,||,|10.000 |,||,||,||,|
Mazda MX-5 Miata 5Zigen ProRacer ZZ Full Cat-Back NC Exhaust 2006-2015
Each exhaust designed to fit each vehicle type.
By improving exhaust pipe layout, we have emphasized the most power outcome and also JASMA clearance for street legality in Japan. Under 94dB
Main Pipe: SUS436（1.2mm）All Stainless
Tailend: SUS304 with rear main Silencer already matched per vehicle
Features
*Layout designed to increase mid-range torque
*Exhaust tone tuned by race engineers
*JASMA certified
|,|"Shipping Cost from Japan" "add (+$169)"|-||-|||-||MAZDA-MIATA-7-INCH-CLASSIC-BLACK-SERIES-PROJECTOR-KIT|,|NEW|,|Mazda MX-5 Miata 7" Black Classic V1 1990-1997|,|CPB6024BB|,|469.99|,|349.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata 7" Black Classic V1 1990-1997
Description:
Halogen headlights in classic cars struggle with dim and scattered light beams. The Dapper Lighting headlight kits embody the classic look while substantially upgrading the quality and spread of light. The unique hi-low switch design keeps the costs low while providing a clean and safe light cutoff design, eliminating the issue of "headlight dazing" on the roads. You get 7" round waterproof headlights and specially-designed 42mm Bi-Xenon projector (high and low beams) with adjustable light focus and flat light distribution to prevent blinding of oncoming traffic.
Specifications:
* 7" Round Waterproof Headlights
* Glass Housing and Projector Lenses
* Specially Designed 42mm Bi-Xenon H1 Projector (High and Low Beams)
* Heavy Duty Halogen Wiring Harness
* 55W Halogen H1 Bulbs
* Parking/Daytime Running Light (T10)
* Flat light distribution to prevent blinding of oncoming traffic
* ISO9001, E4, SAE Compliance
Upgrade to HIDs Later:
* Includes Heavy Duty HID Wiring Harness w/Relays for Future Upgrades
* Compatible with any Aftermarket Ballasts and H1 Bulbs.
Dimensions:
Height: 177.8mm (7 inches)
Width: 177.8mm (7 inches)
Length: 111.8mm (4.4 inches)
Weight: 8lbs
|,|"Select Bulb" "Select Here" "Halogen" "35W HID Kit (5000K) add(+$125)" "35W HID Kit (6000K) add(+$125)"|-||-|"Projector Kit Relay Harnesses (V1/V2)" "add(+$29)"|-||-|"Optional Protection Cover" "Select Here" "Clear add(+$45)" "Smoke add(+$55)" "Red add(+$55)" "Blue add(+$55)" "Yellow add(+$55)" "Amber add(+$55)" "Green add(+$55)" "Pink add(+$55)"|-||-|||-||MAZDA-MX-5-MIATA-7-CLASSIC-BLACK-PROJECTOR-KIT-WITH-HIDS-1990-1997|,|NEW|,|Mazda MX-5 Miata 7" Black Classic V2 1990-1997|,|CPB6024|,|499.99|,|399.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata 7" Black Classic V2 1990-1997
Description:
Halogen headlights in classic cars struggle with dim and scattered light beams. The Dapper Lighting headlight kits embody the classic look while substantially upgrading the quality and spread of light. The unique hi-low switch design keeps the costs low while providing a clean and safe light cutoff design, eliminating the issue of "headlight dazing" on the roads. You get 7" round waterproof headlights and specially-designed 42mm Bi-Xenon projector (high and low beams) with adjustable light focus and flat light distribution to prevent blinding of oncoming traffic.
Specifications:
* 7" Round Waterproof Headlights
* Glass Housing and Projector Lenses
* Specially Designed 42mm Bi-Xenon H1 Projector (High and Low Beams)
* Heavy Duty HID Wiring Harness w/ Relays Included
* Parking/Daytime Running Light (T10)
* Flat light distribution to prevent blinding of oncoming traffic
* ISO9001, E4, SAE Compliance
* 35W Canbus HID Kit w/6000K H1 Bulbs (5 Year Warranty)
Dimensions:
Height: 177.8mm (7 inches)
Width: 177.8mm (7 inches)
Length: 111.8mm (4.4 inches)
Weight: 8lbs
|,|"Select Bulb" "Select Here" "Halogen" "35W HID Kit (5000K) add(+$125)" "35W HID Kit (6000K) add(+$125)"|-||-|"Projector Kit Relay Harnesses (V1/V2)" "add(+$29)"|-||-|||-||MAZDA-MX-5-MIATA-7--BLACK-CLASSIC-V2-WITH-HIDS-1990-1997|,|NEW|,|Mazda MX-5 Miata 7" Carbon V2 1990-1997|,|carbon-v2|,|499.99|,|399.55|,||,||,||,||,||,||,|Mazda MX-5 Miata 7" Carbon V2 1990-1997
Description:
Halogen headlights in classic cars struggle with dim and scattered light beams. The Dapper Lighting headlight kits embody the classic look while substantially upgrading the quality and spread of light. The unique hi-low switch design keeps the costs low while providing a clean and safe light cutoff design, eliminating the issue of "headlight dazing" on the roads. You get 7" round waterproof headlights and specially-designed 42mm Bi-Xenon projector (high and low beams) with adjustable light focus and flat light distribution to prevent blinding of oncoming traffic.
Specifications:
* 7" Round Waterproof Headlights
* Glass Housing and Projector Lenses
* Specially Designed 42mm Bi-Xenon H1 Projector (High and Low Beams)
* Heavy Duty HID Wiring Harness w/ Relays Included
* Parking/Daytime Running Light (T10)
* Flat light distribution to prevent blinding of oncoming traffic
* ISO9001, E4, SAE Compliance
* 35W Canbus HID Kit w/6000K H1 Bulbs (5 Year Warranty)
Dimensions:
Height: 177.8mm (7 inches)
Width: 177.8mm (7 inches)
Length: 111.8mm (4.4 inches)
Weight: 8lbs
|,|"Select Bulb" "Select Here" "Halogen" "35W HID Kit (5000K) add(+$125)" "35W HID Kit (6000K) add(+$125)"|-||-|"Projector Kit Relay Harnesses (V1/V2)" "add(+$29)"|-||-|||-||MAZDA-MX-5-MIATA-7--CLASSIC-PROJECTOR-KIT-WITH-HALOGEN-BULBS|,|NEW|,|Mazda MX-5 Miata 7" Chrome Classic V1 1990-1997|,|CP6024BB|,|469.99|,|339.05|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata 7" Chrome Classic V1 1990-1997
Description:
Halogen headlights in classic cars struggle with dim and scattered light beams. The Dapper Lighting headlight kits embody the classic look while substantially upgrading the quality and spread of light. The unique hi-low switch design keeps the costs low while providing a clean and safe light cutoff design, eliminating the issue of "headlight dazing" on the roads. You get 7" round waterproof headlights and specially-designed 42mm Bi-Xenon projector (high and low beams) with adjustable light focus and flat light distribution to prevent blinding of oncoming traffic.
Specifications:
* 7" Round Waterproof Headlights
* Glass Housing and Projector Lenses
* Specially Designed 42mm Bi-Xenon H1 Projector (High and Low Beams)
* Heavy Duty Halogen Wiring Harness
* 55W Halogen H1 Bulbs
* Parking/Daytime Running Light (T10)
* Flat light distribution to prevent blinding of oncoming traffic
* ISO9001, E4, SAE Compliance
Upgrade to HIDs Later:
* Includes Heavy Duty HID Wiring Harness w/Relays for Future Upgrades
* Compatible with any Aftermarket Ballasts and H1 Bulbs.
Dimensions:
Height: 177.8mm (7 inches)
Width: 177.8mm (7 inches)
Length: 111.8mm (4.4 inches)
Weight: 8lbs
|,|"Select Bulb" "Select Here" "Halogen" "35W HID Kit (5000K) add(+$130)" "35W HID Kit (6000K) add(+$130)"|-||-|"Projector Kit Relay Harnesses (V1/V2)" "add(+$29)"|-||-|"Optional Protection Cover" "Select Here" "Clear add(+$45)" "Smoke add(+$55)" "Red add(+$55)" "Blue add(+$55)" "Yellow add(+$55)" "Amber add(+$55)" "Green add(+$55)" "Pink add(+$55)"|-||-|||-||MAZDA-MX-5-MIATA-DAPPER-LIGHTING-CLASS-7-PROJECTOR-HEADLIGHT-KIT|,|NEW|,|Mazda MX-5 Miata 7" Classic V2 1990-1997|,|CP6024LHD|,|499.99|,|399.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata 7" Classic V2 1990-1997
Description:
Halogen headlights in classic cars struggle with dim and scattered light beams. The Dapper Lighting headlight kits embody the classic look while substantially upgrading the quality and spread of light. The unique hi-low switch design keeps the costs low while providing a clean and safe light cutoff design, eliminating the issue of "headlight dazing" on the roads. You get 7" round waterproof headlights and specially-designed 42mm Bi-Xenon projector (high and low beams) with adjustable light focus and flat light distribution to prevent blinding of oncoming traffic.
Specifications:
* 7" Round Waterproof Headlights
* Glass Housing and Projector Lenses
* Specially Designed 42mm Bi-Xenon H1 Projector (High and Low Beams)
* Heavy Duty HID Wiring Harness w/ Relays Included
* Parking/Daytime Running Light (T10)
* Flat light distribution to prevent blinding of oncoming traffic
* ISO9001, E4, SAE Compliance
* 35W Canbus HID Kit w/6000K H1 Bulbs (5 Year Warranty)
Dimensions:
Height: 177.8mm (7 inches)
Width: 177.8mm (7 inches)
Length: 111.8mm (4.4 inches)
Weight: 8lbs
|,|"Select Bulb" "Select Here" "Halogen" "35W HID Kit (5000K) add(+$125)" "35W HID Kit (6000K) add(+$125)"|-||-|"Projector Kit Relay Harnesses (V1/V2)" "add(+$29)"|-||-|||-||LED-SEVEN|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda MX-5 Miata 7" LED SEVEN 1990-1997|,|LED-SEVEN|,|559.00|,|449.00|,||,||,||,||,||,||,|Mazda MX-5 Miata 7" LED SEVEN 1990-1997
Our ultimate goal was to do the unthinkable: Integrate the latest projector lighting technology into the slimmest headlamp design on the market. Seven's bring peace of mind for those with minimal space to work with under the hood. Not only are they the slimmest 7" projector light ever created, the SEVEN'S also pack of punch. Designed with our own thermo-regulated LED optical module, you get a massive increase of light at less than half the draw of power. Step into the modern era with SEVEN's while maintaining the classic timeless look your ride deserves.
Designed to be a replacement for stock sealed beams, these lights fit into most classic car headlight buckets without any modification. The wiring plugs right into your OEM socket and there's no need to modify your existing wiring. With the low amperage draw of LED's long gone is the world of ballasts and relay harnesses.
The optimal task in designing the unit was to find the balance of brightness, heat dispersion, and reliability all in one. Sevens come equipped with a specially designed variant of ThermoCool LED that has accumulated countless hours of testing and design. What you get is a high performance LED optical unit with virtually silent performance and lifespan designed to exceed 10,000 hours. The Integrated 10,000RPM cooling system keeps your bulb temperatures low preserving the integrity of your SEVENS and surrounding components. With light output over 3x stock headlights, you'll get a boatload of crisp white light while saving more than 60% amperage draw compared to OEM sealed beams.
To deliver that classic look, our unique partial Fresnel lenses utilize a special clear center to ensure your output is crisp and clean. The glass lens has a standard sealed beam curvature to retain the bubbled look. We not only believe in change, but change for the better.
Powered by the latest technology, most of our headlights can be paired with our optional switchback halos. These halo rings feature a crisp white day time running-light, which then 'switches' to a deep amber light when activated by your vehicle's turn signal switch. Want the brightest? Add a set of our HDR halos for the most bright and advanced halos on the market.
|,|"Housing Color" "Select Here" "Chrome" "Black"|-||-|"Lens Type" "Select Here" "Clear Lens" "OE Lens add(+$85)"|-||-|"Halo Choice (Sevens)" "Select Here" "Modern White add(+$70)" "Classic Switchback White & Amber add(+$70)" "HDR Switchback White & Amber add(+$170)" "HDR Switchback Multi-Color add(+$170)"|-||-|"Optional Protection Cover" "Select Here" "Clear add(+$45)" "Smoke add(+$55)" "Red add(+$55)" "Blue add(+$55)" "Yellow add(+$55)" "Amber add(+$55)" "Green add(+$55)" "Pink add(+$55)"|-||-|||-||OE7|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Mazda MX-5 Miata 7" OE SEVEN 1990-1997|,|OE7|,|449.99|,|349.00|,||,||,||,||,||,||,|Mazda MX-5 Miata 7" OE SEVEN 1990-1997
For years we have strived to create headlights that integrate modern technology that retain the stock looks your classic vehicles deserve. Well, we’ve finally achieved our goal. At the core of the OE7 is our featured LED projector technology with the appearance of a classic H4 headlight. The OE7 delivers up to 3X more light than a traditional H4 conversion, 65% less draw than a sealed beam and 100% more confidence in your night driving.
Inside you’ll find a plug and play adaptive power unit to stabilize voltage to high power Korean Semiconductor LEDs lighting up the road ahead of you. With only a 2.1 amp draw, you’ll have less strain on your alternator and more power to bump your tunes. Power surges and dips? No problem. The onboard control unit will adapt to your vehicle and keep you safe.
The OE7 features Progressive Low/High output to help aid your eyes when driving at night. As you turn your high beams on, your low beams will dim so your eyes can adjust to seeing light further down the road. Studies show that foreground light should be decreased to increase distance visibility.
To deliver that classic look, our unique partial fresnel lenses utilize a special clear center to ensure your output is clean and crisp. The glass lens has a standard sealed beam curvature to retain the bubbled look. We not only believe in change, but change for the better. If you are looking for stock replacements, you can’t go wrong with an OE7.
|,|"Lens Type" "Select Here" "Clear Lens" "OE Lens add(+$80)"|-||-|"Daytime Running Light" "Select Here" "Halogen" "Philips LED (White) add(+$23)" "Philips LED (Amber) add(+$23)"|-||-|||-||MAPEIN20NE|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata AEM MazdaSpeed Cold Air Intake System for 2006-2015|,|21-729C|,|599.55|,|478.02|,||,||,|0.000 |,||,||,||,|AEM MazdaSpeed MX-5 Miata Performance Intake for 2006-2015
Brand new is the AEM performance cold air intake for the 2006-2015 Mazda MX-5 Miata! Also sold by Mazda as the MazdaSpeed intake if you want to pay more for the exact same intake!
The stock Mazda MX-5 Miata airbox is restrictive by its design to allow use of an inexpensive and flat paper filter. The AEM intake achieves better breathing by using a much higher flowing velocity stack conical filter placed directly in the flow of cool air in the "mouth" of the Miata. Not only will this intake give your Miata much freer breathing and quicker acceleration, but also provide a nice deep growl at high revs. This is the same intake that MAZDA requires for the new Pro Spec racing series in the new MX-5 Miata.
SKU:
2010-2015 Gray: aem21-729C
2010-2015 Polished: aem21-729P
2006-2009 Gray: aem21-640C
2006-2009 Polished: aem21-640P
Note: Photo is only a representation, actual intake photo coming soon.
|,|"Select Year" "Select Here" "2006-2009" "2010-2015 add(+$40)"|-||-|"Select Finish" "Select Here" "Gunmetal Gray Finish" "Polished Finish add(+$40)"|-||-|||-||SOFT-TOP|,||,|Mazda MX-5 Miata All Soft Tops |,||,||,||,||,||,||,||,||,||,||,|||-||SOFTTOPNC|,||,|Mazda MX-5 Miata All Soft Tops - NC|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-ALLEY-GATOR-TEETH-GRILLE-INSERT|,|NBGRILLANDBRA|,|Mazda MX-5 Miata Alley Gator Teeth Grille Insert|,|Miata-Alley-Gator-Teeth-Grille-Insert|,|92.99|,|79.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Alley Gator Teeth Grille Insert
Reptiles are In!
We're talking some ancient, nasty reptiles here which continue to strike fear in man. Maybe it's because they haven't heard that WE are supposed to be at the top of the food chain.
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
See Installation Tab for more details
* Alley Gator NOT included *
|,|||-||MAZDA-MX-5-MIATA-OIL-CAP-2016|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Mazda MX-5 Miata Autoexe Oil Filler Cap 1990-2020 - Sale! |,|rev-Autoexe|,|119.95|,|94.05|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Autoexe Oil Filler Cap 1990-2020
Product Description
Handsome oil filler cap made by Autoexe for your NA, NB, NC, and ND Miata. This cap is made of durable aluminum and is anodized in a deep red color. A great accessory for your engine bay!
|,|"Select Year" "Select Here" "2016-2020+" "2006-2015" "2001-2005 add(+$10)" "1999-2000 add(+$10)" "1994-1997 add(+$10)" "1990-1993 add(+$10)"|-||-|||-||MAMXMIBLPAON|,|MIGIMOVIALL|,|Mazda MX-5 Miata Black Parking Only Sign 1990-1997|,|AU-MK1-BLACK|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Black Parking Only Sign 1990-1997
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|||-||MAMXMIBLPAON2|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata Black Parking Only Sign 1999-2005|,|AU-MK2-BLACK|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Black Parking Only Sign 1999-2005
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|||-||MAMXMIBLPAON4|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Black Parking Only Sign 2006-2015|,|AU-MK3-BLACK|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Black Parking Only Sign 2006-2008
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|"Select Year" "Select Here" "2006-2008" "2013-2015"|-||-|||-||MAMXMIBLPAON1|,|MIGIMOVIALL|,|Mazda MX-5 Miata Blue Parking Only Sign 1990-1997|,|AU-MK1-BLUE|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Blue Parking Only Sign 1990-1997
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|||-||MAMXMIBLPAON3|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata Blue Parking Only Sign 1999-2005|,|AU-MK2-BLUE|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Black Parking Only Sign 1999-2005
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|||-||MAZDA-MX-5-MIATA-BRAKE-CALIPERS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata Brake Calipers 1994-2000 ALL & 2001-2002 With Standard Brakes|,|907-23X|,|129.99|,|109.98|,||,||,||,||,||,||,|Mazda MX-5 Miata Brake Calipers 1994-2000 ALL & 2001-2002 With Standard Brakes
These are brand NEW aftermarket brake calipers, for less money than OEM Mazda rebuilt calipers!
Sold each, but we advise you replace in pairs per axle.
|,|"Select Brake Caliper Side" "Select Here" "Front Left" "Front Right" "Rear Left add(+$20.00)" "Rear Right add(+$20.00)"|-||-|||-||MAZDA-MX-5-MIATA-BUBBA-TEETH-GRILLE-INSERT|,|NBGRILLANDBRA|,|Mazda MX-5 Miata Bubba Teeth Grille Insert|,|Miata-Bubba-Teeth-Grille-Insert|,|92.99|,|82.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Bubba Teeth Grille Insert
Embrace Your Red Neck Roots
Adorably red neck, the Bubba car shouts independence and self confidence. Looks great on a car 'in progress.'
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
See Installation Tab for more details
|,|||-||MAZDA-MX-5-MIATA-BUDDY-CLUB-E-THROTTLE-BOOSTER|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Buddy Club e-Throttle Booster 2006-2019|,|BC04-ETB-C108B|,|449.99|,|375.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Buddy Club e-Throttle Booster 2006-2019
Details
The advent of electronic throttle (or “drive-by-wire”) systems in late model cars presents a unique tuning opportunity. On these cars, the throttle plate is modulated by an electronic signal that is connected to the accelerator pedal. Because this system is based upon voltage readings from a sensor, it can be easily modified with an electronic controller. Controlling the ratio of pedal-to-throttle opening allows the driver to dial in precisely the feeling needed, whether its quick blips of the throttle for heel-toe driving technique or de-sensitizing the pedal for economy mode driving. Now, the driver has this under his control with the Buddy Club e-Throttle Booster.
FEATURES
Utilizing the latest microprocessor technology, the e-Throttle Booster modifies the signal between accelerator pedal, ECU, and throttle body to boost or cut the angle of the throttle plate in relation to its stock settings. The e-Throttle Booster allows for 12-steps of adjustment and 31 levels of total adjustment throughout the range of the throttle position sensor, allowing for precision changes according to driver preference. At low ranges, it reduces the perceived effect of “throttle lag” – the amount of time that occurs between when the accelerator is pressed and when the engine responds. At the upper RPM ranges, the increased sensitivity makes it easier to perform racing techniques like the heel-toe shift. Each unit comes with an application specific wiring harness for quick installation.
BENEFITS
Since it is adjustable, the driver can change preferences “on the fly” or leave them set up for track or off-road preference. E-Throttle Booster also utilizes an “Economy” Mode that allows the driver to de-tune throttle response for the most fuel economy with the least amount of driver effort. This new idea is now being implemented as optional equipment on late model vehicles, and may soon be an available feature on all new electronic throttle cars. The increase in fuel savings will more than pay for the unit itself in a short amount of time. Conversely, dual-purpose vehicles that see highway time in addition to serving weekend warrior duty can now implement an additional level of automatic control and fine-tuning that’s never been available before. A quick flick of the knob is all it takes to maximize your throttle effort. Like the short throw shifters that came before them, the e-Throttle Booster incorporates technology and an revised driving experience that will have you hooked once you try it. You may never have to “push the pedal to the metal” to achieve the wide-open throttle response that you need during spirited driving maneuvers.
TECHNICAL
Electronic throttle or drive-by-wire throttle systems utilize a sensor incorporated into the vehicle’s main Engine Control Unit (ECU) to translate your mechanical pedal effort into electronically modulated opening and closing of the throttle plate in the throttle body. From the factory, the ratio of pedal movement to throttle plate opening is governed by the ECU and is meant to provide the most reasonable compromise between pedal sensitivity and throttle plate movement. The e-Throttle Booster acts as a modifier of that signal, allowing you to increase or decrease the ratio at will, fine tuning the pedal actuation experience to the driving task at hand. With its fast microprocessors, the e-Throttle Booster can virtually eliminate the perceived lag between pedal and throttle plate; it also has the capability to modify the total angle opening of the throttle plate in real time, allowing more air (and therefore, more power production ability) into the engine intake tract Because of the method used to intercept and modify the signal, as well as the point in the ECU system where the signal is modified, the e-Throttle Booster will not be detected by the car’s OBDII system; therefore, the factory ECU cannot “override” your settings, nor will the e-Throttle Booster cause Diagnostic Trouble Codes.
|,|||-||MAZDA-MX-5-MIATA-CAGE-ROLL-CAGE-2016-|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Cage Roll Cage 2016+ - Sale! |,|mazda-mx-5-miata-cage-roll-cage-2016-|,|2,900.00|,|2,399.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Cage Roll Cage 2016+
Fully coped ready to weld in roll cage kit for your 2016+ Mazda Miata. Legal for SCCA/Nasa/World Challenge and other sanctioning bodies.
Go Miata is now offering a roll cage kit for the 2016 ND Mazda MX5 Miata. Designed just like our 1990-2015 kits it offers the most room possible in the car while protecting the occupants.
This kit however if FULLY coped and ready for install. Minimal fitting required and comes with 2 templates that bolt to the car for proper placement of the main hoop. Once the main hoop is placed properly then all other tubes will fit into their proper position.
Kit comes will all plates laser cut and formed needed for the installation.
There are no S-bends in this kit for hte door bars. Unlike other designs we avoided those S style bends in the door bars which giving you the most strength possible.
Features:
* Lightweight weld in kit.
* Laser cut and formed landing plates (10). Weld into place with no modifications.
* 1” tube gussets and landing plates and center Taco gusset all included.
* Main Hoop locator bracket - This is a bolt in bracket to align the main hoop in the car for the proper position since all other tubes key off of the main hoop.
* Fully notched kit. All tubes are fully notched/coped and ready for installation.
* Having the kit fully notched reduces the installation time by over 10 hours.
* In house Computer controlled bending ensuring accurate bends every time.
* Every piece is marked with a part # that corresponds to 4 separate full page schematics.
* Rear down tubes land next to shock mounts.
* When installed properly less than 1/4 inch of clearance to roof allowing for more head room for taller drivers.
* Includes Nascar door bars on both drivers and passenger sides installed at an angle that provide the driver with added safety in the event of a side impact.
* Allows for stock passenger seat to be reinstalled once complete.
* Kill Switch Plate for passenger side main hoop area.
Please allow 3-4 Weeks for production of these Custom made Miata Cage Roll Cage 2016+
|,|"Freight Cost" "add(+$490)"|-||-|||-||CARBING-FRONT-STRUT-BAR-TYPE-2|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata Carbing Front Strut Bar Type 2 1999-2021+|,|carbing-front-strut-bar-type-2|,|729.99|,|595.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Carbing Front Strut Bar Type 2
Product from JAPAN. Aluminum 3 point front strut tower bar made by CARBING for maximum chassis rigidity. You cannot get a better strut bar than this.
• Makes the engine bay look great
• Stiffens the body more than the average strut bar
• Lightweight
|,|"Select Year" "Select Here" "1999-2000" "2001-2005" "2006-2008" "2016-2019 (1.5L Engine)" "2016-2019 (2.0L Engine)"|-||-|"EMS Shipping Cost from Japan" "add(+$179)"|-||-|||-||MAZDA-MX-5-MIATA-CARBON-CREATIONS-CIRCUIT-FRONT-LIP-2016-2017---1-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Carbon Creations Circuit Front Lip 2016-2019 - (1 Piece)|,|113049|,|599.99|,|399.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Carbon Creations Circuit Front Lip 2016-2019 - (1 Piece)
NOTE: Front Lip Must be USED WITH Circuit front bumper, this will NOT fit the OEM Front bumper
Part Description
2x2 twill weave carbon fiber
Premium gloss, UV protectant finish
Track-proven strength and performance
Up to 70% lighter than OEM factory parts
Weather-resistant aluminum mesh grille (where applicable)
1 year limited warranty
|,|"Freight Cost" "add(+$149)"|-||-|||-||MAZDA-MX-5-MIATA-CARBON-CREATIONS-CIRCUIT-HOOD-2016-2017-1-PIECE1|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Carbon Creations Circuit Hood 2016-2019 - (1 Piece)|,|113047|,|2,299.99|,|1,770.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Carbon Creations Circuit Hood 2016-2019 - (1 Piece)
Part Description
* 2x2 twill weave carbon fiber
* Premium gloss, UV protectant finish
* Track-proven strength and performance
* Up to 70% lighter than OEM factory parts
* Weather-resistant aluminum mesh grille (where applicable)
* 1 year limited warranty
|,|"Freight Cost" "add(+$229)"|-||-|||-||MAZDA-MX-5-MIATA-CARBON-CREATIONS-CIRCUIT-REAR-DIFFUSER-2016-2017---1-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Carbon Creations Circuit Rear Diffuser 2016-2019 - (1 Piece)|,|113048|,|899.99|,|589.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Carbon Creations Circuit Rear Diffuser 2016-2019 - (1 Piece)
Part Description
* 2x2 twill weave carbon fiber
* Premium gloss, UV protectant finish
* Track-proven strength and performance
* Up to 70% lighter than OEM factory parts
* Weather-resistant aluminum mesh grille (where applicable)
* 1 year limited warranty
|,|"Freight Cost" "add(+$179)"|-||-|||-||MAZDA-MX-5-MIATA-CARBON-FIBER-DOOR-HANDLES-2009-2015|,||,|Mazda MX-5 Miata Carbon Fiber Door Handles 2009-2014|,|CM-DH1-NC|,|199.99|,|159.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Carbon Fiber Door Handles 2009-2014
Those carbon fiber door handles replace the existing ones on NC2 and NC3.
4 screws and 2 minutes time to replace them.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in Carbon Fiber (CF) and Carbon Kevlar (CK).
|,|"Material" "Please Select" "Carbon Fiber" "Kevlar add(+$15.00)"|-||-|||-||MAZDA-MX-5-MIATA-CARBON-FIBER-HARDTOP-2016|,|SHOP-BY-SALE|,|Mazda MX-5 Miata Carbon Fiber Hardtop 2016+|,|50-65-9100|,|3,999.99|,|2,995.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Carbon Fiber Hardtop 2016+
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
BRAND NEW FOR THE 2016 MX-5! We are now taking orders for the CARBON FIBER STREET VERSION of this hardtop.
- REAL carbon fiber, light weight hardtop.
- Rear non-glass molded shatterproof window
- Mounting brackets included - front, side and rear.
- Superior fit and finish
- Approximately 20 pounds
- Fully sealed, weatherproof.
- Mounts without removing soft top.
- GORGEOUS!
NOTE: This model is called a "street" model because it comes with weatherproofing seals and a molded rear window. It is not, however, a factory hardtop. First of all, it weighs less than half of a factory top - this makes it super easy to put on and take off, but does not keep out the road noise quite as well as one twice its weight. The mounting brackets are custom made for the top, and the window seals, although effective, are not molded to the window like those in a factory top. The molded rear window looks great and is weather-proof, however it is not glass, and does not have a defrosting option. Bottom line - this is a very nice top, easy to install, and looks great - but it is not a factory top, and will not provide exactly the same the comfort/noise reduction that a factory top will.
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||MAZDA-MX-5-MIATA-CHROME-3RD-BRAKE-LIGHT-COVER-2006-2015|,|20MAMIEXLI|,|Mazda MX-5 Miata Chrome 3rd Brake Light Cover 2006-2015 (Soft Top)|,|ILM-907-077|,|69.99|,|55.98|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome 3rd Brake Light Cover 2006-2015 (Soft Top)
Dramatically enhance the look of your Miata with chrome accents. They offer a smooth and brilliant shine to otherwise dull areas. Crafted from automotive-grade ABS with durable chrome plating, all pieces are able to take all the abuse they get thrown at them: tossed rocks, pounding weather and exploded bugs. And, the bright chrome plating will never yellow like a steel cover.
Application:Soft Top Only - NOT FOR PRHT
|,|||-||MAZDA-MX-5-MIATA-CHROME-3RD-BRAKE-LIGHT-COVER-PRHT-ONLY-2006-2015|,|20MAMIEXLI|,|Mazda MX-5 Miata Chrome 3rd Brake Light Cover PRHT only 2006-2015|,|ILM-907-078|,|84.99|,|59.98|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome 3rd Brake Light Cover PRHT only 2006-2015
Dramatically enhance the look of your Miata with chrome accents. They offer a smooth and brilliant shine to otherwise dull areas. Crafted from automotive-grade ABS with durable chrome plating, all pieces are able to take all the abuse they get thrown at them: tossed rocks, pounding weather and exploded bugs. And, the bright chrome plating will never yellow like a steel cover.
Application: 2006-2015 PRHT (Hard Top) Only.
|,|||-||916-120|,|20MAMIINDA|,|Mazda MX-5 Miata Chrome Climate Control Caps by IL Motorsport 2006-2008|,|916-120|,|42.45|,|32.90|,||,||,||,||,||,||,|Mazda MX-5 Miata Chrome Climate Control Caps by IL Motorsport 2006-2008
Chrome accents add elegance like no other modification. These caps from IL Motorsport are made from ABS plastic that is chrome plated for high luster and enduring bright finish. These caps just pop on your existing knobs, no double-sided tape or adhesive is needed. Most pieces include instructions where necessary.
|,|||-||MAZDA-MX-5-MIATA-CHROME-DOOR-HANDLE-ACCENTS-2006-2015|,|20MIMIEXPA|,|Mazda MX-5 Miata Chrome Door Handle Accents 2006-2015|,|ILM-904-569|,|69.99|,|56.98|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome Door Handle Accents 2006-2015
Great looking exterior accents add elegance and style to your Miata. Chrome accents attach with adhesive already supplied. Kit includes pieces for either keyless entry or standard door locks.
Price is for the PAIR
|,|||-||MAZDA-MX-5-MIATA-CHROME-MIRROR-FRAMES-2006-2015|,|20MIMIEXPA|,|Mazda MX-5 Miata Chrome Mirror Frames 2006-2015|,|ILM-907-076|,|79.99|,|64.98|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome Mirror Frames 2006-2015
Dramatically enhance the look of your Miata with chrome accents. They offer a smooth and brilliant shine to otherwise dull areas. Crafted from automotive-grade ABS with durable chrome plating, all pieces are able to take all the abuse they get thrown at them: tossed rocks, pounding weather and exploded bugs. And, the bright chrome plating will never yellow like a steel cover.
|,|||-||MAZDA-MX-5-MIATA-CHROME-MOLDED-MIRROR-CAPS-2006-2015|,|20MIMIEXPA|,|Mazda MX-5 Miata Chrome Molded Mirror Caps 2006-2015|,|ILM-907-075|,|79.99|,|69.98|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome Molded Mirror Caps 2006-2015
Dramatically enhance the look of your Miata with chrome accents. They offer a smooth and brilliant shine to otherwise dull areas. Crafted from automotive-grade ABS with durable chrome plating, all pieces are able to take all the abuse they get thrown at them: tossed rocks, pounding weather and exploded bugs. And, the bright chrome plating will never yellow like a steel cover.
|,|||-||MAZDA-MX-5-MIATA-CHROME-SHIFTER-RING-2009-2013|,|20MAMIINVIAL|,|Mazda MX-5 Miata Chrome Shifter Ring 2009-2013|,|NC2-50010|,|59.99|,|45.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome Shifter Ring 2009-2013
Mazda MX-5 Miata Chrome Shifter Ring 2009-2013. This is not a universal part, but it is very exclusive and only fits Mazda MX-5 Miata Face Lift models from 2009 and up. The ring will fit the console like it is an OEM piece and has a very nice chrome finish. On the back there is 3M tape mounted for an easy installation.
Note! this ring will not fit the 2005-2008 Mazda MX-5 Miata models because they have a very differently designed console. Installs in minutes!
Features: High quality chrome finish.
|,|||-||MAZDA-MX-5-MIATA-CHROME-TAILLIGHT-FRAMES-2006-2008|,|20MIMIEXPA|,|Mazda MX-5 Miata Chrome Taillight Frames 2006-2008|,|ILM-916-132|,|89.99|,|74.98|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome Taillight Frames 2006-2008M
Great looking chrome accents add elegance and style to your Miata. Beautiful chrome over strong ABS plastic, this piece adds a brilliant sparkle to an otherwise dull area.
|,|||-||MAZDA-MX-5-MIATA-CHROME-TAILLIGHT-FRAMES-2009-2015|,|20MIMIEXPA|,|Mazda MX-5 Miata Chrome Taillight Frames 2009-2015|,|ILM-909-620|,|99.99|,|79.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome Taillight Frames 2009-2015
Great looking chrome accents add elegance and style to your Miata. Beautiful chrome over strong ABS plastic, this piece adds a brilliant sparkle to an otherwise dull area.
|,|||-||MAZDA-MX-5-MIATA-CHROME-TRUNK-LOCK-BEZEL-2006-2015|,|NBACCESSORIES|,|Mazda MX-5 Miata Chrome Trunk Lock Bezel 2006-2015|,|ILM-916-117|,|35.99|,|27.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome Trunk Lock Bezel 2006-2015
Chrome accents add elegance like no other modification. Most pieces install easily with 3M adhesive and includes instructions where necessary. Made from a chrome ABS plastic.
|,|||-||MIATA-CLEAR-SIDE-MARKER-LIGHTS|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Clear Side Marker Lights by IL Motorsports 2016-2019|,|910-270|,|49.99|,|39.97|,||,||,||,||,||,||,|Mazda MX-5 Miata Clear Side Marker Lights by IL Motorsports 2016-2019
The IL Motorsport replacement side indicator lights are a great functional upgrade to your ND. The factory indicator is a one-piece design so when it fails you have to buy a whole new light assembly not just a bulb. The IL Motorsports lights are two pieces so you can replace just the bulb. Comes in two styles clear, like the factory, or smoked and is a simple plug and play install.
Color: Clear
|,|||-||MAZDA-MX-5-MIATA-COBALT-3-POINT-SHOCK-TOWER-BRACE-20161|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Cobalt 3-Point Shock Tower Brace 2016+|,|910-890|,|399.99|,|359.90|,||,||,||,||,||,||,|Mazda MX-5 Miata Cobalt 3-Point Shock Tower Brace 2016+
Our widely popular Cobalt brand is now expanded with the addition of this 3-Point Shock Tower Brace for the newest fourth generation "ND" MX-5 Miata. As soon as our 2016 car was delivered from Mazda our team went to work, and after crucial design time and many testing hours we are proud to bring this bar to market.
Don’t bother looking for a strut brace that compares with this one. Oval section stainless steel tubing is mated to beautifully crafted tower supports. The welds on this brace are a work of art! Aside from the best craftsmanship available, this brace actually works. Patterned after Le Mans style chassis bracing, this piece mounts in three places tying the front shocks to the firewall. This ensures rigidity that cannot be duplicated by lesser quality braces that simply mount from shock tower to shock tower. Comes complete with instructions and all necessary hardware.
NOTE: If Your MX-5 MIata did NOT come with a OEM Shock Brace, you will need to get the "Cowl Reinforcement Plate (N244-56-35X)" with this order.
|,|"Does Your Miata Have a OEM Shock Brace?" "Select Here" "Yes, I have a OEM Shock Brace" "No, I need a Cowl Reinforcement Plate add(+$72.05)"|-||-|||-||MAMXMICOVAHO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Color Vacuum Hose Kit 2006-2010|,|MOS-904-24|,|59.95|,|55.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Color Vacuum Hose Kit 2006-2010
Its easy to create a whole new look for your Miata by simply replacing your cars OEM hoses with these brilliantly colored silicone hose kits. Besides enhancing appearance, replacing the hoses under your hood can actually cure mysterious problems created from vacuum leaks. Cover your prop rod to match. Made specifically for the Miata, these kits include complete instructions and cutting tools.
Lifetime warranty.
|,|"Select Color" "Super Red" "Super Blue" "Flo Black"|-||-|||-||MAZDA-MX-5-MIATA-COMPLETE-RACING-EDITION-1-62-INCH-PRIMARY-PPE-LONG-TUBE-HEADER-AND-MIDPIPE---STAINL|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Complete Racing Edition 1.62 Inch Primary PPE LONG tube Stainless Steel Header and Midpipe 2006-2015|,|61-1078|,|2,450.00|,|2,199.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Complete Racing Edition 1.62 Inch Primary PPE LONG tube Stainless Steel Header and Midpipe 2006-2015
Ultimate 2.0 Long Tube MX5 Header!
These headers are now full stainless steel construction
The original PPE Long tubes were developed for our STR class racers using 1.5 inch pipe and other vendors jumped on the bandwagon and pushed that version as the header for everything....but our continued testing resolved that the ideal version for 2.0 liter customers needed to move to bigger 1.62 inch tube size. Our testing found the 1.5 inch pipe version cut the top end a bit too much, 1.75 inch cut low range torque, and 1.62 is just right. Thus we bring you the exclusive Good-Win Racing version of the PPE header in the MUCH IMPROVED 1.62 primary size for better top end in addition to smooth broad torque curves. This is the best size for 2.0 customers, also works very well for customers who might go to 2.5 liter motors as our testing of this size on 2.5 liter motors has proven (199 ft/lbs torque in our testing on stock 2.5 motor!).
INCLUDES special midpipe shown here AND our both our O2 extensions necessary to make install plug and play (beware other vendors selling smaller primary version of this header AND without these extensions as they expect you to hack your harness as part of the install)
Fits both Manual Transmission and Automatic Left Hand Drive only. Designed for STR class racers but available to all seeking to maximize their results.
Due to the SCCA STR class rule changes not requiring a cat in the header for 2012, our friends at PPE developed a new race header that makes more midrange power than the previous PPE header with converter.
The header features equal length runners and a specially designed collector. Our early version of this header was mild steel but now we've updated these to full stainless steel construction.
The integrated midpipe is made of 304 stainless steel and has a 200 cell per inch magnaflow 5" round catalytic converter in it. The header and midpipe combo will bolt to your stock or aftermarket muffler.
An aftermarket muffler is required for optimal performance. The Dyno Testing shown in our forum was done using our Good-Win Racing RoadsterSport Race muffler.
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MX-5-MIATA-CONSOLE-BRACKET-2009-2015|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Console Bracket 2009-2015|,|NH5264516C|,|49.99|,|42.01|,||,||,||,||,||,||,|Mazda MX-5 Miata Console Bracket 2009-2015
#16 in the diagram.
|,|||-||GAMICOTOPRAR|,|SOFT-TOP|,|Mazda MX-5 Miata Convertible Top Rain Rail 1990-2005|,|910-391|,|142.00|,|118.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Convertible Top Rain Rail 1990-2005
Switch the cracked rain rail of your convertible with the original I.L. Motorsport replacement suitable for all NA and NB models. Located at the rear lower part of the top, the seal is subject to extreme wear, especially in older vehicles. A rain rail is a great way to channel excess water to the drain holes in the top instead of letting water flow into your Miata and ruin its interior. Shield your Miata with this brand new, high quality rain rail. Includes necessary rivets.
|,|||-||MAMXMICOBRSC1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Cool Breeze Scoop 2006-2018|,|CBS-904-511|,|49.99|,|44.98|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Cool Breeze Scoop 2006-2018
Do you find yourself hot and uncomfortable even though the top is down? Are you constantly trying to scoop in air with your hand from above the windshield or through the window?
The Cool Breeze Scoop forces fresh air in over the console and into the foot wells. The Cool Breeze Scoop is an easy-on/easy-off accessory that takes less then 10 seconds to install and fits easily in your glove box when not in use.
The Cool Breeze Scoop is molded from an automotive ABS/Polycarbonate composite plastic. It is non-reflective black with a textured finish. It can be primed and painted in a color of your choice with flexible bumper paint, but looks great the way it is delivered.
|,|||-||MAZDA-MX-5-MIATA-CUSTOM-ARMREST-LEATHER-UPHOLSTERY-COVER-2016-|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Custom Armrest Leather Upholstery Cover by RedLineGoods 2016+|,|custom-armrest-leather-upholstery-cover-2016-|,|109.99|,|79.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Custom Armrest Leather Upholstery Cover 2016+
A great addition to any interior. Upgrade your factory armrest with custom leather cover.
Padding available for more comfort. Makes interior overhaul complete with matching shift.
Hand crafted from genuine Italian leather.
Perfect fitment. Easy installation - no modifications required.
PLEASE NOTE: Contains the Armrest covers ONLY - plastic frame, shift knob, handbrake handle etc. are not included. The photos are for display purposes only.
|,|"Select Color" "Select Here" "Black / Silver" "Black / Red" "Black / Black" "Black / Blue thread" "Black / Tan" "Black perforated / Black" "Black perforated / Red" "Black perforated / Silver" "Black perforated / Tan" "Black suede (Alcantara) / Blue thread" "Black suede (Alcantara) / Red thread" "Black suede (Alcantara) / Silver thread" "Gray / Black thread" "Latte / Black thread" "Red / Black thread" "Tan / Black thread"|-||-|||-||MAZDA-MX-5-MIATA-CUSTOM-FIT-DASHTEX-DASH-COVER-2016|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Custom Fit Black Dashtex Dash Cover 2016+|,|2247-0|,|69.99|,|49.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Custom Fit Black Dashtex Dash Cover 2016+
Protect your Miata's dash from UV damage with a great fitting dash mat. The material is a modern, woven material that is an upgrade from the old "velour" of the 1990s, with a cushioned backing for protection against scratches. Each mat is specifically tailored to each model Miata.
Color: Black
Mazda MX-5 Miata Year: 2016
|,|"Color" "Black"|-||-|||-||MAZDA-MX-5-MIATA-CUSTOM-EBRAKE-BOOT-2016|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Custom Leather EBrake Boot 2016+|,|mazda-mx-5-miata-custom-ebrake-boot-2016|,|109.99|,|79.98|,||,||,||,||,||,||,|Mazda MX-5 Miata Custom Leather EBrake Boot 2016+
A perfect compliment to a custom leather shift boot. Fits like OEM.
Hand crafted from finest Italian leather.
Perfect replacement to cheap factory vinyl.
Very easy to install - no modifications required.
|,|"Select Color" "Select Here" "Black / Silver" "Black / Red" "Black / Black" "Black / Blue thread" "Black / Tan" "Black perforated / Black" "Black perforated / Red" "Black perforated / Silver" "Black perforated / Tan" "Black suede (Alcantara) / Blue thread" "Black suede (Alcantara) / Red thread" "Black suede (Alcantara) / Silver thread" "Gray / Black thread" "Latte / Black thread" "Red / Black thread" "Tan / Black thread"|-||-|||-||MAZDA-MX-5-MIATA-CUSTOM-QUILTED-FLOOR-MATS-2015|,||,|Mazda MX-5 Miata Custom Quilted Floor Mats 2015+|,|LD-FM1-ND|,|299.99|,|188.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Custom Quilted Floor Mats 2015+
Availability: 6-8 weeks production time
These quilted floor mats fit on top of the interior carpet of your ND. They will give a nice look to your interior but also reduce the noise getting in the passenger compartment.
- Leather/rubber combination
- high quality material
- waterproof
- washable very easily
- Scratch resistant
Please check the pictures attached for the choice of material colors available
|,|"Color" "Please Select" "Classic Black" "Classic Black and Red" "Saddle Brown" "Saddle Brown Rice" "Sweet Rice" "The Sun Orange"|-||-|"Shipping Cost" "add(+$59.99)"|-||-|||-||MAZDA-MIATA-DAIKEI-HUB-ADAPTER-PLUG---PLAY-2015-|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata Daikei Boss Hub Adapter Plug & Play 2015+|,|mazda-miata-daikei-hub-adapter-plug-play-2015|,|199.99|,|169.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Daikei Boss Hub Adapter Plug & Play 2015+
Product Description:
High quality steering wheel adapter from Japan made by DAIKEI for the 2015+ ND Miata. It fits Nardi, MOMO, Mazdaspeed, Sparco every other compatible steering wheels with Nardi and MOMO.
|,|||-||MAZDA-MX-5-MIATA-DAPPER-LIGHTING-MATSUSHITA-GEN-III-BALLASTS-WITH-MOUNTING-BRACKETS|,|NAEXLI|,|Mazda MX-5 Miata Dapper Lighting Matsushita Gen III Ballasts With Mounting Brackets|,|MATSUG3AMP-35T|,|150.00|,|130.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Dapper Lighting Matsushita Gen III Ballasts With Mounting Brackets
We are now carrying DOT approved Matsushita Gen 3 Ballasts.
These are the very same ballasts that are used on Nissan and Infiniti vehicles.
Projectors: All models (low beam or bi-xenons)
Bulbs: Any after market AMP bulb (35w)
OEM Applications: many Nissan, Infiniti, and Subaru vehicles
Input: DC 12V
Output: AC85V 35w
Rated Lifetime: 2000 hours (approx 7-10 years under normal use)
Part number: NZMNS111LBNA
Dimensions: Max Width:(4.0") Max Length:(4.25")
Thickness: (1.23")
Warning: These are not 100% waterproof. You must seal them properly if they will be exposed to extreme weather.
|,|||-||MAZDA-MX-5-MIATA-DIABLO-TEETH-GRILLE-INSERT|,|NBBODYSTYLING|,|Mazda MX-5 Miata Diablo Teeth Grille Insert|,|mazda-mx-5-miata-diablo-teeth-grille-insert|,|92.99|,|82.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Diablo Teeth Grille Insert
Fangs Galore: You wanted more fangs. You got 'em! By customer request, we have added canines big time. Call 'em
wolves, leopards, panthers, or even the werewolf, they're the biggest, baddest canines your car will ever see.
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
|,|||-||MAZDA-MX-5-MIATA-DIGITALFIT-FLOORLINER-LASER-MEASURED-FOR-A-PERFECT-FIT-TAN|,|20MAMIINVIAL|,|Mazda MX-5 Miata DigitalFit FloorLiner - Laser measured for a Perfect Fit (2006-2015 Tan)|,|WT452621|,|159.95|,|127.05|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata DigitalFit FloorLiner - Laser measured for a Perfect Fit (Tan)
FloorLiner™ DigitalFit®
In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech® have worked tirelessly to develop the most advanced DigitalFit® floor protection available today!
The WeatherTech® FloorLiner™ DigitalFit® accurately and completely lines the interior carpet giving "absolute interior protection™"! The WeatherTech® FloorLiner™ DigitalFit® lines the interior carpet up the front, back and even up the sides of the vehicle’s footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit!
A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech® FloorLiner™ DigitalFit® over the door sill. No muss-no fuss!
WeatherTech®, where Technology and All Weather Protection meet!
Rear FloorLiner™ DigitalFit®
Rear FloorLiner™ DigitalFit® incorporates many of the same design features as the front FloorLiner™ DigitalFit®. Rear FloorLiner™ DigitalFit® (where offered) is manufactured from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under extreme temperatures. Rear FloorLiner™ DigitalFit® is either one piece or two piece depending on the vehicle application.
Helps Protect Resale Value
Rear FloorLiner™ DigitalFit® protects resale value too! Simply put, the cost of owning a vehicle is the difference between what you pay for it and what you sell it for. There are many factors that influence resale value; miles, exterior condition, maintenance history and of course interior condition. FloorLiner™ DigitalFit® is proudly designed, engineered and manufactured with American made tooling in the USA.
FloorLiner™ DigitalFit® is designed for vehicles with factory carpet installed when manufactured. They will not fit vehicles with vinyl floors unless otherwise specified. Please take your old floor mats out before installing your new WeatherTech® FloorLiner™ DigitalFit®.
Please note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
|,|"Application" "Mazda MX-5 Miata 2006-2015"|-||-|||-||MAZDA-MX-5-MIATA-DIGITALFIT--FLOORLINER----LASER-MEASURED-FOR-A-PERFECT-FIT-2016|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata DigitalFit® FloorLiner™ - Laser Measured for a Perfect Fit 2016-2019|,|WT448471|,|147.99|,|126.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata DigitalFit® FloorLiner™ - Laser Measured for a Perfect Fit 2016-2019
FloorLiner™ DigitalFit®
In the quest for the most advanced concept in floor protection, the talented designers and engineers at WeatherTech® have worked tirelessly to develop the most advanced DigitalFit® floor protection available today!
The WeatherTech® FloorLiner™ DigitalFit® accurately and completely lines the interior carpet giving "absolute interior protection™"! The WeatherTech® FloorLiner™ DigitalFit® lines the interior carpet up the front, back and even up the sides of the vehicle’s footwell. Digital laser measurements of interior surfaces offer a consistently perfect fit!
A patent pending High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! Once fluids become trapped in the reservoir, away from shoes and clothing, they are easily removed from the WeatherTech® FloorLiner™ DigitalFit® over the door sill. No muss-no fuss!
WeatherTech®, where Technology and All Weather Protection meet!
Rear FloorLiner™ DigitalFit®
Rear FloorLiner™ DigitalFit® incorporates many of the same design features as the front FloorLiner™ DigitalFit®. Rear FloorLiner™ DigitalFit® (where offered) is manufactured from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under extreme temperatures. Rear FloorLiner™ DigitalFit® is either one piece or two piece depending on the vehicle application.
Helps Protect Resale Value
Rear FloorLiner™ DigitalFit® protects resale value too! Simply put, the cost of owning a vehicle is the difference between what you pay for it and what you sell it for. There are many factors that influence resale value; miles, exterior condition, maintenance history and of course interior condition. FloorLiner™ DigitalFit® is proudly designed, engineered and manufactured with American made tooling in the USA.
FloorLiner™ DigitalFit® is designed for vehicles with factory carpet installed when manufactured. They will not fit vehicles with vinyl floors unless otherwise specified. Please take your old floor mats out before installing your new WeatherTech® FloorLiner™ DigitalFit®.
Please note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
|,|"Application" "Mazda MX-5 Miata 2016-2019"|-||-|"Color" "Black"|-||-|||-||MAZDA-MIATA-DURAFLEX-50MM-CIRCUIT-REAR-FENDER-FLARES-2016-2017-2-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Duraflex 50mm Circuit Rear Fender Flares 2016-2017 - (2 Piece)|,|113030|,|799.99|,|389.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Duraflex 50mm Circuit Rear Fender Flares 2016-2017 - (2 Piece)
Part Description
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$149)"|-||-|||-||MAZDA-MIATA-DURAFLEX-CIRCUIT-BODY-KIT-2016-2017---5-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Duraflex Circuit Body Kit 2016-2019 (5 Piece)|,|113306|,|2,449.96|,|1,742.12|,||,||,||,||,||,||,|Mazda MX-5 Miata Duraflex Circuit Body Kit 2016-2019 (5 Piece)
Includes:
Circuit Front Bumper (113027)
Circuit Side Skirts (113030)
Circuit Rear Diffuser (113033)
Circuit Front Lip (113046)
Part Description
* Hand laid, high quality 6 oz. fiberglass
* Signature black finish
* High quality weather resistant aluminum mesh grille (where applicable)
* Proprietary polymer blend for maximum flexibility
* Increased durability and longer service life
* Reduced damage rate up to 75%
* Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$249)"|-||-|||-||MAZDA-MIATA-DURAFLEX-CIRCUIT-FRONT-BUMPER-2016-2017---1-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Duraflex Circuit Front Bumper 2016-2019 - (1 Piece)|,|113027|,|949.00|,|789.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Duraflex Circuit Front Bumper 2016-2019 - (1 Piece)
Part Description
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$299)"|-||-|||-||MAZDA-MX-5-MIATA-DURAFLEX-CIRCUIT-HOOD-2016-2017-1-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Duraflex Circuit Hood 2016-2019 - (1 Piece)|,|113031|,|1,099.99|,|876.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Duraflex Circuit Hood 2016-2019 - (1 Piece)
Part Description
* Hand laid, high quality 6 oz. fiberglass
* Signature black finish
* High quality weather resistant aluminum mesh grille (where applicable)
* Proprietary polymer blend for maximum flexibility
* Increased durability and longer service life
* Reduced damage rate up to 75%
* Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$219)"|-||-|||-||MAZDA-MX-5-MIATA-DURAFLEX-CIRCUIT-SIDE-SKIRTS-2016-2017-2-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Duraflex Circuit Side Skirts 2016-2019 - (2 Piece)|,|113028|,|649.99|,|535.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Duraflex Circuit Side Skirts 2016-2019 - (2 Piece)
Part Description
Hand laid, high quality 6 oz. fiberglass
Signature black finish
High quality weather resistant aluminum mesh grille (where applicable)
Proprietary polymer blend for maximum flexibility
Increased durability and longer service life
Reduced damage rate up to 75%
Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$159)"|-||-|||-||MAZDA-MX-5-MIATA-DURAFLEX-CIRCUIT-WIDE-BODY-KIT-2016-2017-9-PIECE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Duraflex Circuit Wide Body Kit 2016-2019 - (9 Piece)|,|113308|,|3,849.94|,|3,098.18|,||,||,||,||,||,||,|Mazda MX-5 Miata Duraflex Circuit Wide Body Kit 2016-2019 - (9 Piece)
Includes:
Circuit Front Bumper (113027)
Circuit Side Skirts (113028)
Circuit Front Fender Flares (113029)
Circuit Rear Fender Flares (113030)
Circuit Rear Diffuser (113033)
Circuit Front Lip (113046)
NOTE: Fender Flares are 50mm wider than stock
Part Description
* Hand laid, high quality 6 oz. fiberglass
* Signature black finish
* High quality weather resistant aluminum mesh grille (where applicable)
* Proprietary polymer blend for maximum flexibility
* Increased durability and longer service life
* Reduced damage rate up to 75%
* Limited warranty and satisfaction guarantee
|,|"Freight Cost" "add(+$279)"|-||-|||-||MAZDA-MX-5-MIATA-EBC-3GD-SERIES-FRONT-SPORT-ROTORS-GD7392|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata EBC 3GD Series Front Sport Rotors GD7392 - 2006-2015|,|GD7392|,|380.97|,|305.95|,||,||,||,||,||,||,|Mazda MX-5 Miata EBC 3GD Series Front Sport Rotors GD7392 - 2006-2015
EBC manufacture 90% of its rotor range in ISO and TÜV approved facilities in the UK or in Italy, all rotors including GD Sport Rotors are machined and finished in the UK and in the USA. Where castings or finished rotors have been bought in to complement the range, the strictest quality controls you can imagine ensure the safety and quality of the parts we sell. EBC adds value to its products by strictest quality controls and specifications and a 100% run out and dimensional check, plus all USA sport rotors are slotted at the Las Vegas facility of the USA operation. We employ 14 people in our USA rotor machining facility alone and have a bank of 8 HAAS and Feeler CNC machines using the latest CNC controls and tooling for superb accuracy.
|,|"Special Handling fee" "add(+$10)"|-||-|||-||MAZDA-MX-5-MIATA-EBC-3GD-SERIES-SPORT-ROTORS-GD1197---2006-2015|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata EBC 3GD Series Rear Sport Rotors GD1197 - 2006-2015|,|GD1197|,|289.09|,|229.05|,||,||,||,||,||,||,|Mazda MX-5 Miata EBC 3GD Series Rear Sport Rotors GD1197 - 2006-2015
EBC manufacture 90% of its rotor range in ISO and TÜV approved facilities in the UK or in Italy, all rotors including GD Sport Rotors are machined and finished in the UK and in the USA. Where castings or finished rotors have been bought in to complement the range, the strictest quality controls you can imagine ensure the safety and quality of the parts we sell. EBC adds value to its products by strictest quality controls and specifications and a 100% run out and dimensional check, plus all USA sport rotors are slotted at the Las Vegas facility of the USA operation. We employ 14 people in our USA rotor machining facility alone and have a bank of 8 HAAS and Feeler CNC machines using the latest CNC controls and tooling for superb accuracy.
|,|"Special Handling fee" "add(+$10)"|-||-|||-||MAZDA-MX-5-MIATA-EBC-BRAKES-USR7392|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata EBC Front Brake Rotors USR7392 - 2006-2015|,|USR7392|,|293.22|,|269.05|,||,||,||,||,||,||,|Mazda MX-5 Miata EBC Front Brake Rotors USR7392 - 2006-2015
EBC Ultimax Rotors are slotted brake rotors featuring the new EBC Dash design which helps cool brakes and de-gas brakes under load and speed. Coated with Black Geomet coating.
|,|"Special Handling fee" "add(+$10)"|-||-|||-||MAZDA-MX-5-MIATA-EBC-REAR-BRAKE-ROTORS-USR7392---2006-2015|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata EBC Rear Brake Rotors USR7392 - 2006-2015|,|USR1197|,|242.99|,|195.99|,||,||,||,||,||,||,|Mazda MX-5 Miata EBC Rear Brake Rotors USR7392 - 2006-2015
EBC Ultimax Rotors are slotted brake rotors featuring the new EBC Dash design which helps cool brakes and de-gas brakes under load and speed. Coated with Black Geomet coating.
|,|"Special Handling fee" "add(+$10)"|-||-|||-||MAZDA-MX-5-MIATA-EBC-RK-SERIES-PREMIUM-OE-STYLE-ROTORS-RK7392|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA EBC RK Series Premium OE-Style Front Rotors RK7392 - 2006-2015|,|RK7392|,|166.54|,|158.01|,||,||,||,||,||,||,|MAZDA MX-5 MIATA EBC RK Series Premium OE-Style Front Rotors RK7392 - 2006-2015
EBC adds value to its products by strictest quality controls and specifications and a 100% run out and dimensional check, including element analysis, surface finish and hardness tests on every batch and runout inspection . All sport rotors are slotted and grooved at the Las Vegas facility of the USA operation or at our new Northampton rotor facility employing 32 staff which has recently been enhanced to have its own QC department, machining and testing facilities and a new Nitrotherm anti corrosion coating plant.
We also do all we can to embrace US employment and in our US facilities we employ 14 people in our rotor machining facility alone.
All EBC Premium Brake Rotors or discs are cast to a material strength of 150 N/m2 with a tightly controlled surface hardness variation less than 20 HB and are precision CNC machined to a surface tolerance of less than 0.05 mm. That is two thousandths of an inch. For this reason EBC recommends a maximum runout of fitted rotors of 0.1 mm or .004 inches (4 thousandths) TIR which means total indicator reading on a dial gauge.
|,|"Special Handling fee" "add(+$10)"|-||-|||-||EBC-RK-SERIES-PREMIUM-OE-STYLE-REAR-ROTORS-RK1197|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata EBC RK Series Premium OE-Style Rear Rotors RK1197 - 2006-2015|,|RK1197|,|145.60|,|103.99|,||,||,||,||,||,||,|Mazda MX-5 Miata EBC RK Series Premium OE-Style Rear Rotors RK1197 - 2006-2015
EBC adds value to its products by strictest quality controls and specifications and a 100% run out and dimensional check, including element analysis, surface finish and hardness tests on every batch and runout inspection . All sport rotors are slotted and grooved at the Las Vegas facility of the USA operation or at our new Northampton rotor facility employing 32 staff which has recently been enhanced to have its own QC department, machining and testing facilities and a new Nitrotherm anti corrosion coating plant.
We also do all we can to embrace US employment and in our US facilities we employ 14 people in our rotor machining facility alone.
All EBC Premium Brake Rotors or discs are cast to a material strength of 150 N/m2 with a tightly controlled surface hardness variation less than 20 HB and are precision CNC machined to a surface tolerance of less than 0.05 mm. That is two thousandths of an inch. For this reason EBC recommends a maximum runout of fitted rotors of 0.1 mm or .004 inches (4 thousandths) TIR which means total indicator reading on a dial gauge.
|,|"Special Handling fee" "add(+$10)"|-||-|||-||MAZDA-MX-5-MIATA-ENGINE-BRACE-2006-2013-URETHANE|,|MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,|Mazda MX-5 Miata Engine Brace - 2006-2013 - Urethane|,|AWR-5600|,|250.99|,|204.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Engine Brace - 2006-2013 - Urethane
Product Description
Engine Brace for 2006-up Mazda MX-5. It mounts on the passenger side of the car. It attaches to the right front shock tower and to the right front side of the head. Polyurethane mount for street cars . Also available for MX-5 Cup cars and true auto-cross and track cars with solid mount bushings instead of polyurethane mounting. adjustable. Powder coated black. nickel plated adjusters.
Weight: 5.00 Lbs
|,|||-||MAZDA-MX-5-MIATA-ENGINE-MOUNT-KIT-2006-2013|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Engine Mount Kit 2006-2013|,|AWR-5601|,|250.00|,|220.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Engine Mount Kit 2006-2013
Product Description
Priced per pair. There is no substitute for the AWR engine mount with stiff urethane bushings. Completely new fabricated heavy duty replacement engine mounts are manufactured. Available in soft 70 durometer, medium 88 durometer or stiffer 95 durometer urethane bushings, and encased in silver powder brackets.
Helps stop drivetrain lash (rocking) when transitioning from gas on to gas off. Help keep that engine stable inside that engine compartment, putting the power to the ground instead of rocking the engine. Provides a more direct throttle response.
|,|"Select Durometer" "Click Here" "70" "88" "95"|-||-|||-||CARBON-EYE-LIDS-NB|,||,|Mazda MX-5 Miata Eye Lids 1999-2000|,|CMCF73|,|140.00|,|99.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Eye Lids 1999-2000
*Carbon Fiber Pictured
These subtle eyelids fit on the 98-00 NB headlights. Made with high quality carbon fiber, they are extremely light and add a subtle touch to the front of your car. We supply high grade 3M double side adhesive with each set.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Material" "Fiberglass" "Carbon Fiber add(+$60)" "Carbon Kevlar add(+$80)"|-||-|||-||ALI-EYE|,|20MAMIEXAC|,|Mazda MX-5 Miata Eyelids Eyebrows 2009-2015|,|ALI-EYE|,|154.00|,|119.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Eyelids Eyebrows 2009-2015
DESCRIPTION
These eyelids fit on the NC2/NC3 headlights (2009-2015). Made with high quality carbon fiber or fiberglass, they are extremely light and add a subtle touch to the front of your car. We supply high grade 3M double side adhesive with each set.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
|,|"Select Material" "Select Here" "Fiberglass" "Carbon Fiber add(+$65)"|-||-|||-||GEMAMIMXRELI|,|MIATA-OEM-EXTERIOR-PARTS-2006-2015|,|Mazda MX-5 Miata Factory Style Rear Lip Spoiler 2006-2015|,|910-395|,|272.95|,|159.95|,||,||,|15.000 |,||,||,||,|Mazda MX-5 Miata Factory Style Rear Lip Spoiler 2006-2015
SPOILER, REAR LIP (SOFT-TOP ONLY - NOT FOR PRHT)
Accent your sporty attitude with this race-inspired Rear Lip Spoiler and complete the sports car look. A sportier look is just a spoiler away. Precision molded from fiberglass for a clean fit and smooth finish. Spoiler is supplied ready for prep and paint.
|,|||-||MAMXMIFEPR|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Fender Protector|,|MOS-916-180|,|49.95|,|34.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Fender Protector good for all years!
• Non-slip material will not slide off slick surfaces
• Soft and cushioned for protection
• Tools will not slip off fender cover
• Completely washable
• 22" X 34" standard size
• Strong PVC product reinforced with nylon mesh
• Impervious to motor oil, coolant, lacquer thinner, brake fluid, etc.
• Will not harm your paint
|,|||-||MAZDA-MX-5-MIATA-2016-FIBERGLASS-HARDTOP-|,|SHOP-BY-SALE|,|Mazda MX-5 Miata Fiberglass Hardtop 2016+|,|50-65-7100|,|2,995.99|,|2,140.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Fiberglass Hardtop 2016+
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
BRAND NEW FOR THE 2016 MX-5! We are now taking orders for the STREET VERSION of this hardtop. If you want the RACING version (designed for roll cages), please see 50-65-8100.
- Fiberglass, light weight hardtop. Black gelcoat finish.
- Rear non-glass molded shatterproof window
- Mounting brackets included - front, side and rear.
- Superior fit and finish
- Approximately 20 pounds
- Mounts without removing soft top.
- Fully sealed, weatherproof.
NOTE: Fiberglass Color is Black. This model is called a "street" model because it comes with weatherproofing seals and a molded rear window. It is not, however, a factory hardtop. First of all, it weighs less than half of a factory top - this makes it super easy to put on and take off, but does not keep out the road noise quite as well as one twice its weight. The mounting brackets are custom made for the top, and the window seals, although effective, are not molded to the window like those in a factory top. The molded rear window looks great and is weather-proof, however it is not glass, and does not have a defrosting option. Bottom line - this is a very nice top, easy to install, and looks great - but it is not a factory top, and will not provide exactly the same the comfort/noise reduction that a factory top will.
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||MAZDA-MX-5-MIATA-FIBERGLASS-RACE-HARDTOP-2016-|,|SHOP-BY-SALE|,|Mazda MX-5 Miata Fiberglass RACE Hardtop 2016+|,|50-65-8100|,|2,995.99|,|2,140.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Fiberglass RACE Hardtop 2016+
*Special Order, Please allow 2-3 weeks for production of these Custom made Miata Hardtop.
FOR THE 2016 MX-5 Miata! This is the RACING version of the hardtop. If you want the fully sealed STREET version, please see 50-65-7100 (fiberglass) or 50-65-9100 (carbon fiber).
- Fiberglass, extra light weight hardtop. Black gelcoat finish.
- 3-4 inches extra head room over soft top (you can comfortably wear a helmet)
- Rear non-glass shatterproof window
- Mounting brackets included - front and side.
- Designed to fit comfortably over a full roll cage
- Superior fit and finish
- Approximately 20 pounds
- Window seals NOT included
|,|"Freight Shipping Cost" "add(+$419)"|-||-|||-||MAZDA-MX-5-MIATA-FRONT-BRAKE-COOLING-DUCT-PLATE-2006-2012|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Front Brake Cooling Duct Plate 2006-2012|,|RCI-BD|,|240.00|,|160.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Front Brake Cooling Duct Plate 2006-2012
Product Description
Brake cooling duct plate includes 1 each left and right steel powder coated brake ducts for the hub. Connect your own 2.5" hose and intakes. Fits all 2006-2012 MX-5.
Weight: 5.00 Lbs
|,|||-||MAZDA-MX-5-MIATA-GARAGE-VARY-CARBON-REAR-GARNISH-2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Garage Vary Carbon Rear Garnish 2016+|,|mazda-mx-5-miata-garage-vary-carbon-rear-garnish-2016|,|359.99|,|314.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Garage Vary Carbon Rear Garnish 2016+
Rear Garnish for the 2016+ ND Miata made by Garage Vary out of Carbon Fiber. Adds aerodynamics to the rear end of the vehicle as well as give a more aggressive look. It's also a great way to hide tire sticking out of fender when running bigger or wider wheels/tires.
Overview
• Made from high quality Carbon Fiber
• Looks great
• Perfect fit
• Only available ND (2016+) MX-5 Miata
|,|||-||MAZDA-MX-5-MIATA-GARAGE-VARY-EMBLEM-INTAKE-2016-|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Garage Vary Emblem Intake 2016+|,|mazda-mx-5-miata-garage-vary-emblem-intake-2016-|,|399.99|,|349.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Garage Vary Emblem Intake 2016+
Emblem Ram Air Intake made by Garage Vary for the 2016+ ND MX-5 Miata. It’s made to provide extra airflow to the intake and a small power gain at the same time by directing cold air directly to the intake.
Ships in 5-10 business days
Overveiw
- Improves power by ~3hp on 1.5L (probably higher on 2.0L) engine
- Subtle look
- Requires cutting into the bumper
- Only available for ND (2016+) MX-5 Miata
|,|"Application" "2016+"|-||-|||-||MAZDA-MX-5-MIATA-GARAGE-VARY-RACE-GT-WING|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Garage Vary Race GT Wing 2016-2020|,|mazda-mx-5-miata-garage-vary-race-gt-wing|,|999.99|,|799.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Garage Vary Race GT Wing 2016-2020+
GT Wing designed by Garage Vary for the 2016+ ND MX-5 to improve lap times during Japan’s Roadster Cup (N-Zero Class) which only allows aerodynamics and suspension modification (no engine upgrades allowed). This GT Wing mounts on the trunk but also overlaps on the quarter panel because it’s more rigid than the flimsy OEM aluminum trunk. The position of the mounts also allows the use of trunk without any problem. It has been tested a lot at Fuji Speedway with constant improvements when using the trunk versus not using it.
Ships in 5-10 business days
Over View
- Requires drilling onto the trunk
- Track Tested
- Made of FRP & Carbon Fiber
- Only available for ND (2016+) MX-5 Miata with Soft Top (non-RF)
|,|"MX-5 Miata Year" "2016+|-||-|"Mount Type" "Select Here" "High Type (270mm)" "Low Type (210mm)" "Super High (300mm)"|-||-|"Shipping Cost" "add(+$145)"|-||-|||-||MAZDA-MX-5-MIATA-GARAGE-VARY-REAR-SPOILER-2016-|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Garage Vary Rear Spoiler 2016+|,|mazda-mx-5-miata-garage-vary-rear-spoiler-2016-|,|499.99|,|399.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Garage Vary Rear Spoiler 2016+
Rear trunk spoiler made by Garage Vary for the ND (2016+) MX-5 Miata. It’s available in both FRP and Carbon Fiber (plain & twill) and will improve the look of the car! It’s installed using 3M double-sided tape and does not require drilling to the trunk.
Ships in 5-10 business days
|,|"Finish" "Select Here" "FRP" "Carbon Fiber add(+$370)"|-||-|||-||GARAGE-VARY-SIDE-SKIRT|,|20MIMIEXPA|,|Mazda MX-5 Miata Garage Vary Side Skirt 2006-2015|,|garage-vary-side-skirt|,|1,099.99|,|759.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Garage Vary Side Skirt 2006-2015
Side Skirt made by Garage Vary for second and third generation NC Mazda MX-5 Miata years 2009-2015. It’s a nice addition that will add an aggressive touch to the side of the vehicle and improve aerodynamics at the same time.
Please contact us if your country is not listed in the shipping destinations.
• Made of high quality FRP
• No cutting to the body needed
• Flows really well with the lines of the car
• Lightweight
• Only available for NCEC-1 (06-08), NCEC-2 (09-12) & NCEC-3 (13-15)
Ships in 5-10 business days
|,|"Select Year" "Select Here" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)"|-||-|"Shipping Cost" "add(+$275)"|-||-|||-||ACCESSORYITEMS|,||,|MAZDA MX-5 MIATA GIFTS & MORE ACCESSORY|,||,||,||,||,||,||,||,||,||,|
|,|||-||APPAREL|,||,|MAZDA MX-5 MIATA GIFTS & MORE APPAREL|,||,||,||,||,||,||,||,||,||,|
|,|||-||BOOKS|,||,|MAZDA MX-5 MIATA GIFTS & MORE BOOKS|,||,||,||,||,||,||,||,||,||,|
|,|||-||GICE|,||,|MAZDA MX-5 MIATA GIFTS & MORE GIFT CERTIFICATES|,||,||,||,||,||,||,||,||,||,|
|,|||-||LIFRANDPL|,||,|MAZDA MX-5 MIATA GIFTS & MORE LICENSE FRAMES AND PLATES|,||,||,||,||,||,||,||,||,||,|
|,|||-||MIGIMOVIALL|,||,|MAZDA MX-5 MIATA GIFTS & MORE VIEW ALL|,||,||,||,||,||,||,||,||,||,|
|,|||-||MAZDA-MX-5-MIATA-GREAT-WHITE-TEETH-GRILLE-INSERT|,|NBGRILLANDBRA|,|Mazda MX-5 Miata Great White Teeth Grille Insert|,|Miata-Great-White-Teeth-Grille-Insert|,|92.99|,|79.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Great White Teeth Grille Insert
Bigger is Better
The quintessential marine killer, this eating machine knows no bounds. When it's kill or be killed, it's good to know which side you're on. The large, triangular profile is hard to miss, making for a 'striking' performance.
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
See Installation Tab for more details
* Shark NOT included *
|,|||-||MAZDA-MX-5-MIATA-GREDDY-EXHAUST-SUPREME-SP---2016-207-|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata GReddy Exhaust Supreme SP 2016-2020|,|10148207|,|899.99|,|719.00|,||,||,||,||,||,||,|Mazda MX-5 Miata GReddy Exhaust Supreme SP 2016-2020
The Legacy of the SP lives on with our best street performance system yet, the Supreme SP!
Chassis: ND
Engine: 2.0l Skyactiv-G
Type: Rear Section only
Number of pieces: 1pc
Piping: 63.5 mm (2.5")
NOTE:
Tip(s): 2x. 82mm (3.25")
Gasket(s): reuse OEM
Resonator: 1x
Weight: TBA lbs (Stock weight TBA lbs)
Sound level: 80 dB(a)
HP: +TBA hp
TRQ: +TBA ft-lbs
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MX-5-MIATA-GREDDY-GRACER-FRONT-LIP-2016|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata GReddy GRacer Front Lip 2016+|,|17040141|,|399.99|,|287.95|,||,||,||,||,||,||,|Mazda MX-5 Miata GReddy GRacer Front Lip 2016+
Front Spoilers are the first point to receive airflow resistance; the design of the front spoiler determines the final handling of the vehicle. The GRACER front spoilers are designed to reduce airflow going beneath the vehicle and also direct air to critical areas such as the radiator and intercooler.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MAMXMIGRPAON|,|MIGIMOVIALL|,|Mazda MX-5 Miata Green Parking Only Sign 1990-1997|,|AU-MK1-GREEN|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Green Parking Only Sign 1990-1997
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|||-||MAMXMIGRPAON1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata Green Parking Only Sign 1999-2005|,|AU-MK2-GREEN|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Green Parking Only Sign 1999-2005
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|||-||MAMXMIDABLPA|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Grey Parking Only Sign 2006-2015|,|AU-MK3-DKBLUE|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Grey Parking Only Sign 2006-2008
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|"Select Year" "Select Here" "2006-2008" "2013-2015"|-||-|||-||MAZDA-MX-5-MIATA-HAPPY-CAR-TEETH-GRILLE-INSERT|,|NBGRILLANDBRA|,|Mazda MX-5 Miata Happy Car Teeth Grille Insert|,|Miata-Happy-Car-Teeth-Grille-Insert|,|92.99|,|82.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Happy Car Teeth Grille Insert
Smiles All Around
You'll be measuring your smile performance in SPG (smiles per gallon) from fellow drivers and pedestrians. Spread the fun around.
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
See Installation Tab for more details
|,|||-||MIHADOGACEBA|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata Hard Dog Ace Bar 1990-2005|,|HDG-ACE|,|639.99|,|499.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata Hard Dog Ace Bar 1990-2005
The Ace, Hard Dog's response to popular demand for a traditional roll bar designed with more rearward placement for better head clearance that doesn't interfere with the stock seat belts.
The flexibility of this design allows us to offer this exciting new bar in many configurations to include: one or two diagonals, harness bar and side or top main hoop rear bracing. The diagonals and / or harness bar can be located in the main hoop or between the rearward braces. Or if you prefer, no diagonal or harness bar at all.
Fits all Miatas through 2005, compatible with hard tops and plastic rear window soft tops, aftermarket or OEM glass rear window convertible tops.* The Ace integrates with the unibody framework inside the rear wheel wells and seat belt towers creating a structure stronger than the individual component parts using much the same mounting system as our Deuce model.
Features include:
* Allows full seat travel and tilt
* Complete use of hard and soft top
* Compatible with 1990 - 2005 Miatas with original equipment or most after market plastic or glass rear windows*
* Durable black powdercoat finish
* Constructed of highest quality 1.75 X .120 inch 1026 alloy drawn over mandrel tubing
* 8 structural attachment points w/ laser cut 3/16" mounting and backup plates
* Complete hardware kit w/ grade 8 bolts
* Not compatible with factory windblocker
|,|"Select Configuration" "Select Here" "Side Braced No Diagonal No Harness Bar" "Side Braced Main Hoop Single Diagonal add(+$70)" "Side Braced Main Hoop Double Diagonal add(+$150)" "Side Braced Double Diagonals to the Rear Brace - Not compatible with glass rear window add(+$175)"|-||-|"Select Harness Bar" "Select Here" "No thanks" "Harness Bar w/rearward braces add(+$80)" "Harness Bar in main hoop add(+$90)" "Rearward Braces to top of main hoop add(+$90)"|-||-|"Select Cover Option" "Select Here" "No Cover" "W/ Padded Black Vinyl Cover add(+$155)" "W/ Padded Blk Leather Cover add(+$199)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||MAMXHADOGM3H|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata Hard Dog M3 Hard Bar 2006-2015 (Retractable Hard Top) - Sale! |,|HRD-M3|,|599.95|,|474.99|,||,||,|30.000 |,||,||,||,|Mazda MX-5 Miata Hard Dog M3 Hard Bar 2006 and newer 3rd Generation MX-5
Hard Dog is proud to introduce our new line of Roll Bars for the 2006 and newer 3rd Generation MX-5. Built from heavy wall 1.75" diameter tubing bolted to the 6 factory hoop anchor points these bars are a serious upgrades from the stock NC equipment. The factory cross brace is reused, no complications with remounting OEM accessories. Plastic interior panels are easily reinstalled and no alterations to the stock seat belts are required.
Feel like you need even more? Take a look at the M3 Sport Bar.
Two main hoop diagonal braces and / or harness bar and / or removable forward bracing may be added.
M3 Hard Bar Features:
Allows full seat travel and tilt
Full interior height - soft top version is 3-1/4" Taller than the factory metal hoops
Complete use of soft top, removable hard top and retractable hard top
Available with a durable black powdercoat finish or polished stainless steel
Constructed of highest quality tubing 1.75" diam x .120" wall
3/16" mounting and backup plates
Complete hardware kit w/ grade 8 bolts and self locking nuts
|,|"Select Bar" "Select Here" "Black Powdercoat" "Black Powdercoat w/ Double Diagonal add(+$125)"|-||-|"Select Harness Bar" "No" "Yes add(+$199)"|-||-|"Speaker Bracket for Harness Bar" "No" "Yes add(+$75)"|-||-|"Black Powdercoat Removable Forward Brace" "No" "Yes add(+$305)"|-||-|"Hard Top Compatibility" "No" "Yes, Retractable Hard Top Compatibility" "Yes, Removable Hard Top Compatibility"|-||-|"Select Cover Option" "No Cover" "W/ Padded Black Vinyl Cover add(+$155)" "W/ Padded Blk Leather Cover add(+$199)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||MAMXHADOGM3S|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata Hard Dog M3 Sport Bar 2006-2015 - Sale! |,|HRD-M3S|,|749.95|,|604.99|,||,||,|30.000 |,||,||,||,|Mazda MX-5 Hard Dog M3 Sport Bar 2006 and newer 3rd Generation MX-5
Hard Dog is proud to introduce our new line of Roll Bars for the 2006 and newer 3rd Generation MX-5. Built from heavy wall 1.75" diameter tubing these bars are a serious upgrades from the stock NC equipment. The factory cross brace is reused, no complications with remounting OEM accessories. Plastic interior panels are easily reinstalled and no alterations to the stock seat belts are required.
The M3 Sport shares the same main hoop as the M3 Hard Bar and the attachments to the 6 factory hoop mounting points. Additional support is provided by 2 rearward braces w/ large 3/16" mounting and back-up reinforcement plates anchored with grade 8 bolts and self locking nuts.
*Because of the rearward braces the M3 Sport is NOT compatible with the retractable hard top.*
Two main hoop diagonal braces and / or harness bar and / or removable forward bracing may be added.
M3 Sport Features:
Allows full seat travel and tilt
Full interior height - 3-1/4" Taller than the factory metal hoops
Complete use of soft top and removable hard top
Available with a durable black powdercoat finish or polished stainless steel
Constructed of highest quality tubing 1.75" diam x .120" wall
2 rearward braces w/ 3/16" mounting and backup plates
Complete hardware kit w/ grade 8 bolts and self locking nuts
|,|"Select Bar" "Black Powdercoat" "Black Powdercoat w/ Double Diagonal add(+$165)"|-||-|"Select Cover Option" "No Cover" "W/ Padded Black Vinyl Cover add(+$155)" "W/ Padded Blk Leather Cover add(+$199)"|-||-|"Select Harness Bar" "No" "Yes add(+$215)"|-||-|"Speaker Bracket for Harness Bar" "No" "Yes add(+$75)"|-||-|"Black Powdercoat Removable Forward Brace" "No" "Yes add(+$305)"|-||-|"Removable Hard Top Version" "Select Here" "No" "Yes"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||M4S|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Hard Dog M4 Sport Bar 2016-2019 - Sale! |,|M4S|,|899.00|,|734.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Hard Dog M4 Sport Bar 2016-2019
Hard Dog is proud to introduce our new Roll Bar for the 2016 4th Generation MX-5. Built from heavy wall 1.75" diameter tubing these bars are a serious upgrades from the stock ND equipment. The aluminum factory cross brace and hoops are removed and replaced. A harness bar with an integral top latch bracket is included as standard equipment. The stock seat belts are retained without alteration.
The M4 Sport main hoop shares the same structural attachments as the factory hoop. Additional support is provided by 2 rearward braces w/ large 3/16" mounting and back-up reinforcement plates anchored with grade 8 bolts and self locking nuts.
Supplied with double diagonal main hoop braces or no diagonals.
M4 Sport Features:
* Allows full seat travel and tilt
* Complete use of soft top
* Available with a durable black powdercoat finish or polished stainless steel
* Constructed of highest quality tubing 1.75" diam x .120" wall
* 2 rearward braces w/ 3/16" mounting and backup plates
* Complete hardware kit w/ grade 8 bolts and self locking nuts
|,|"Select Bar" "Select Here" "Black Powdercoat" "Black Powdercoat w/ Double Diagonal - M4S2D add(+$155)"|-||-|"Select Cover Option" "Select Here" "Black Vinyl add(+$155)" "Black Leather add(+$199)"|-||-|"Select Custom Formed High Density Padding" "No" "Yes add(+$85)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||MAZDA-MX-5-MIATA-HARD-DOG-SPEC-MIATA-CAGE-1990-2005|,|BLACKFRIDAYSALE|,|Mazda Mx-5 Miata Hard Dog Spec Miata Cage 1990-2005|,|HD-CG20SM|,|1,899.99|,|1,650.00|,||,||,|0.000 |,||,||,||,|Mazda Mx-5 Miata Hard Dog Spec Miata Cage 1990-2005
The Hard Dog Cages are designed for use in SCCA Spec Miata and Showroom Stock classes, made with materials and hardware that exceed minimal guidelines.
Custom street configurations and weld together roll cage kits available.
Contact Us for consultation about your specific needs and pricing information
Features include:
• Main hoop designed for full interior height and width
• Allows full use of hard top and soft tops
• Black powdercoat finish
• 1.5" o.d. x .120" wall 1026 dom carbon steel tubing
• Diagonal Brace in the main hoop plane
• Seat back bar
• Spec Miata Version w/ two door bars per side w/ two connector reinforcements for 1990 - 2005 w/ gutted doors or 1990 - 1997 w/ stock door panels
• Complete hardware kit w/ grade 8 bolts, self locking huts and 3/16" back-up plates
|,|"Additional Door Bars" "Select Here" "No" "Yes, add(+$149)"|-||-|"Additional Door Bar Connectors" "Select Here" "No" "Yes, add(+$85)"|-||-|"Petty Bar - Forward Main Hoop Brace" "Select Here" "No" "Yes, add(+$199)"|-||-|"Rearward X Brace Diagonals" "Select Here" "No" "Yes, add(+$235)"|-||-|"Freight Cost" "add(+$450)"|-||-|||-||MAZDA-MX-5-MIATA-HARD-DOG-STREET-MIATA-CAGE-1990-1997|,|BLACKFRIDAYSALE|,|Mazda Mx-5 Miata Hard Dog Street Miata Cage 1990-1997|,|HD-M1-CG20|,|1,599.99|,|1,250.00|,||,||,|0.000 |,||,||,||,|Mazda Mx-5 Miata Hard Dog Street Miata Cage 1990-1997
The Hard Dog Cages are designed for use in SCCA Spec Miata and Showroom Stock classes, made with materials and hardware that exceed minimal guidelines.
Custom street configurations and weld together roll cage kits available.
Contact Us for consultation about your specific needs and pricing information
Features include:
• Main hoop designed for full interior height and width
• Allows full use of hard top and soft tops
• Black powdercoat finish
• 1.5" o.d. x .120" wall 1026 dom carbon steel tubing
• Diagonal Brace in the main hoop plane
• Seat back bar
• Street Miata Version - 1 Door Bar per side 1990 - 1997
• Complete hardware kit w/ grade 8 bolts, self locking huts and 3/16" back-up plates
|,|"Additional Door Bars" "Select Here" "No" "Yes, add(+$99)"|-||-|"Additional Door Bar Connectors" "Select Here" "No" "Yes, add(+$50)"|-||-|"Petty Bar - Forward Main Hoop Brace" "Select Here" "No" "Yes, add(+$169)"|-||-|"Rearward X Brace Diagonals" "Select Here" "No" "Yes, add(+$195)"|-||-|"Freight Cost" "add(+$420)"|-||-|||-||MAZDA-MX-5-MIATA-HARD-DOG-STREET-MIATA-CAGE-1999-2005|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda Mx-5 Miata Hard Dog Street Miata Cage 1999-2005|,|HD-M2-CG20|,|1,899.99|,|1,485.00|,||,||,|0.000 |,||,||,||,|Mazda Mx-5 Miata Hard Dog Street Miata Cage 1999-2005
The Hard Dog Cages are designed for use in SCCA Spec Miata and Showroom Stock classes, made with materials and hardware that exceed minimal guidelines.
Custom street configurations and weld together roll cage kits available.
Contact Us for consultation about your specific needs and pricing information
Features include:
• Main hoop designed for full interior height and width
• Allows full use of hard top and soft tops
• Black powdercoat finish
• 1.5" o.d. x .120" wall 1026 dom carbon steel tubing
• Diagonal Brace in the main hoop plane
• Seat back bar
• Street Miata Version - 1 Door Bar per side 1999 - 2005
• Complete hardware kit w/ grade 8 bolts, self locking huts and 3/16" back-up plates
|,|"Additional Door Bars" "No" "Yes, add(+$120)"|-||-|"Additional Door Bar Connectors" "No" "Yes, add(+$70)"|-||-|"Petty Bar - Forward Main Hoop Brace" "No" "Yes, add(+$209)"|-||-|"Rearward X Brace Diagonals" "No" "Yes, add(+$225)"|-||-|"Freight Cost" "add(+$449)"|-||-|||-||MAZDA-MX-5-MIATA-HARD-TOP-STORAGE-BAG|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1990-1997|,|Mazda MX-5 Miata Hard Top Storage Bag|,|916-245|,|269.99|,|224.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Hard Top Storage Bag
Most damage to hard tops is done while they are off the car, and "safely" stored away. Upgrade your hard top storage solution to this hard top storage bag. The heavy weight nylon bag is velvet lined and padded to protect your hard top from any unforeseen hazards. Zippers on both sides make enclosing your hard top convenient and the sturdy "D" rings allow you to hang it on the wall out of the way. The bag is specially shaped to support the hardtop safely for extended periods with no risk of damage or distortion.
Applications: Fits All Years of Mazda MX-5 Miata.
|,|||-||HARDDOGDEUCE|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata HardDog Deuce 1990-2005 - Sale! |,|HDG-D2|,|789.99|,|614.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata HardDog Deuce 1990-2005
The Deuce, Hard Dog's double hoop roll bar, has styling reminiscent of the AC Cobra and other vintage marques from the golden era of sports car racing. Secured with rearward bracing, the Deuce mounts to the unibody framework inside the rear wheel wells using our crash tested frontal and backup plate design. The mounting system combined with the highest quality heavy wall tubing and single bend hoops with multiple stress-critical attachments creates an unparalleled structural support for this type roll bar. The Hard Dog Deuce is available with center mounted rear braces on the main hoops for a retro Cobraesque appearance, or side mounted rear braces for a cleaner double hoop appearance.
Features include:
* Allows full seat travel and tilt
* Complete use of hard and soft top
* Compatible with 1990 - 2005 Miatas with original equipment or after market plastic or glass rear windows*
* Available with a durable powdercoat finish or polished stainless steel
* Constructed of highest quality 1.75 X .120 inch 1026 alloy drawn over mandrel or T-304 stainless steel tubing
* 10 structural attachment points w/ laser cut 3/16" mounting and backup plates
* Complete hardware kit w/ grade 8 bolts and instructions
* All stainless bars are made to order and take 8 to 10 weeks to complete.
|,|"Select Finish" "Select Here" "Black Powdercoat"|-||-|"Select Bracing" "Select Here" "Side Bracing" "Center Bracing"|-||-|"Select Harness Tab Option" "Select Here" "No Harness Tabs" "With Harness Tabs add(+$65)"|-||-|"Select Padded Cover" "Select Here" "No thanks" "Black Vinyl w/ custom formed padding add(+235)" "Black Leather w/ custom formed padding add(+$285)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||NONAME4|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata HardDog Hard Bar 1990-2005 - Sale! |,|HDG-HB|,|499.99|,|329.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata HardDog Hard Bar 1990-2005
The HARD BAR is a Street / Solo II roll bar designed for ease of installation with the least amount of interference to normal use of the car.
Features of the HARD BAR:
Allows full seat travel and tilt.
Complete use of hardtop, soft top and all glass rear windows.
Full interior height and width.
Constructed of the highest quality tubing 1.5" diameter X .120" wall with 3/16" mounting plates.
Complete hardward kit with grade 8 bolts and instructions included.
Easily installed in all years/models.
Comes standard with a durable powdercoat finish. Padded stitched vinyl or leather cover, or polished stainless steel versions also available. Please select your version below.
|,|"Bar Finish" "Select Here" "Black Powdercoat"|-||-|"Select Cover Option" "Select Here" "No Cover" "W/ Padded Black Vinyl Cover add(+$130)" "W/ Padded Blk Leather Cover add(+$185)"|-||-|"Freight Cost" "add(+$195)"|-||-|||-||HARDBARSPORT|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata HardDog Hard Bar M1 Sport 1990-1997 - Sale! |,|HDG-HS|,|639.99|,|594.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata HardDog Hard Bar M1 Sport 1990-1997
The HARD BAR SPORT uses the same main hoop as the HARD BAR but with the addition of larger bolt-in main hoop mounting plates and rear braces that mount to the structural framework inside the rear wheel wells.
One or two main hoop diagonal braces and / or a harness bar may be added.
This bar is for plastic rear window convertible tops ONLY. Not compatible with the second generation (1999 - 2005) convertible top or aftermarket glass rear window convertible tops.
Features include:
* Allows full seat travel and tilt
* Full interior height and width; farther to the rear than the hard core allowing better head clearance
* Complete use of hard top and soft top
* Available with a durable powdercoat finish or polished stainless steel
* Constructed of highest quality tubing 1.5" diam x .120" wall
* Laser cut 3/16" mounting plates
* Complete hardware kit w/ grade 8 bolts and instructions
|,|"Please Select" "Select Here" "Black Powdercoat Standard" "Black Single Diagonal add(+$105)" "Black Double Diagonal add(+$160)" "Black Powdercoat w/ X Brace Diagonal add(+$390)"|-||-|"Select Harness Bar" "Select Here" "No Thanks" "Blk Powdercoat w/ Harness Bar add(+$80)" "Stainless Harness Bar add(+$360)"|-||-|"Select Optional Covering for Powdercoat Bars Only" "Select Here" "No Cover" "Padded Black Vinyl Cover add(+$155)" "Padded Black Leather Cover add(+$199)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||M2SPORTBAR|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata HardDog Hard Bar M2 Sport 1990-2005 - Sale! |,|HDG-9S|,|695.95|,|484.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata HardDog Hard Bar M2 Sport 1990-2005
The M2 Sport Bar uses the same main hoop mounting system as the original Hard Bar Sport. The redesigned rear braces allow room for the '99 - '05 Mazda glass rear window.
The M2 Sport will also fit the '90-'97 1st generation Miata and is compatible with most after market glass rear window convertible tops. Special diagonal verisons are available* for aftermarket glass rear windows that are larger than the original equipment on the '99 - '05.
One or two main hoop diagonal braces and/or harness attachment tabs may be added.
Features:
* Allows full seat travel and tilt**
* Full interior height and width; farther to the rear than the Standard Hard Core allowing better head clearance
* Complete use of hard top and soft top
* Available with a durable black powdercoat finish or polished stainless steel
* Constructed of highest quality tubing 1.5" diam x .120" wall
* Laser cut 3/16" mounting and backup plates
* Complete hardware kit w/ grade 8 bolts, washers and self locking nuts
|,|"Select Style" "Select Here" "Black Powdercoat Standard" "Black Single Diagonal add(+$70)" "Black Double Diagonal add(+$130)"|-||-|"Select Harness" "Select Here" "No Harness Tab" "Harness Tabs add(+$80)"|-||-|"Select Padding and Cover Option" "Select Here" "No Padding or Cover" "W/ Padded Black Vinyl Cover add(+$155)" "W/ Padded Blk Leather Cover add(+$199)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||HARDCOREBAR|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata HardDog Hard Core M1 Bar 1990-1997 - Sale! |,|HDG-AB1|,|759.99|,|644.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata HardDog Hard Core M1 Bar 1990-1997
The Hard Core bar is designed for the serious SCCA Solo I competitor that wants to maintain a dual purpose car for street and racing use.
Single main hoop diagonal brace and integral harness bar standard - a second main hoop diagonal brace may be added for extra strength and better rear vision. Or get our NEW X Brace Diagonals for the ultimate in strength *
Designed for first generation (1990-1997) plastic rear window convertible tops. Not compatible with the second generation (1999 - 2005) or aftermarket glass rear window convertible tops.
Features:
* Full interior width
* Complete use of plastic rear window soft tops
* Single main hoop diagonal brace and harness bar standard
* Second main hoop diagonal brace may be added for extra strength and better rear vision
* X Brace version for the strongest bar available *
* Durable black powdercoat finish
* Constructed of highest quality 1.75" diam x .120" wall 1026 alloy drawn over mandrel tubing
* Laser cut 3/16" mounting and back-up plates
* Complete hardware kit w/ grade 8 bolts
|,|"Select Configuration & Finish" "Select Here" "Black Single Diagonal" "Black Double Diagonal add(+$135)" "Black X BRACE add(+$195)"|-||-|"Select Cover Option" "Select Here" "No Cover" "W/ Padded Black Vinyl Cover add(+$155)" "W/ Padded Blk Leather Cover add(+$205)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||HARCORHAR|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata HardDog M1 Hard Core Hardtop 1990-1997 - Sale! |,|HDG-TB1|,|769.99|,|654.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata HardDog M1 Hard Core Hardtop 1990-1997
The Hardtop version of the Hard Core Bar is designed for the serious SCCA Solo I competitor that wants to maintain a dual purpose car for street and racing use, but doesn't want to give up the hard top.
Single main hoop diagonal brace and integral harness bar standard - a second main hoop diagonal brace may be added for extra strength and better rear vision. Or get our NEW X Brace Diagonals for the ultimate in strength *
Designed for first generation (1990-1997) plastic rear window convertible tops. Not compatible with the second generation (1999 - 2005) or aftermarket glass rear window convertible tops.
Features include:
* Allows full seat travel and tilt
* Full interior width; farther to the rear than the standard Hard Core allowing better head clearance
* Complete use of hard top and soft top
* Durable black powdercoat finish
* Single main hoop diagonal brace and harness bar standard
* Second main hoop diagonal brace may be added for extra strength and better rear vision
* X Brace version for the strongest bar available *
* Constructed of highest quality 1.75" diam x .120" wall 1026 alloy drawn over mandrel tubing
* Laser cut 3/16" mounting and back-up plates
* Complete hardware kit w/ grade 8 bolts
|,|"Select Configuration" "Select Here" "Black Powdercoat Single Diagonal" "Black Powdercoat Double Diagonals add(+$70)" "Black Powdercoat X BRACE add(+$150)"|-||-|"Select Padding and Cover Option" "Select Here" "No Padding or Cover" "W/ Padded Black Vinyl Cover add(+$155)" "W/ Padded Blk Leather Cover add(+$199)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||M2HACOHA9905|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata HardDog M2 Hard Core Hardtop 1990-2005 - Sale! |,|HDG-NB1|,|769.99|,|654.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata HardDog M2 Hard Core Hardtop 1990-2005
The M2 Hardtop version of the Hard Core Bar is designed for the serious SCCA Solo 1 competitor that wants to maintain a dual purpose car for street and racing use, but doesn't want to give up the hard top or glass rear window convertible top.
Single main hoop diagonal brace and harness tabs standard - a second main hoop diagonal brace may be added for extra strength and better rear vision.
Compatible with the M2 (Second generation 1999-2005) factory glass rear window convertible top and First Generation 1990-1997 with factory size glass rear window.
Features include:
* Full interior width; farther to the rear than the standard Hard Core allowing better head clearance
* Complete use of hard top and 1999-2005 factory glass rear window convertible top
* Durable black powdercoat finish
* Constructed of highest quality 1.75" diam x .120" wall 1026 alloy drawn over mandrel tubing
* Laser cut 3/16" mounting and back-up plates
* Complete hardware kit w/ grade 8 bolts
|,|"Select Configuration" "Select Here" "Black Powdercoat Single Diagonal" "Black Powerdcoat Double Diagonal add(+$70)"|-||-|"Select Padding and Cover Option" "Select Here" "No Padding or Cover" "W/ Padded Black Vinyl Cover add(+$155)" "W/ Padded Blk Leather Cover add(+$199)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||HARDDOGEXTREME|,|BLACKFRIDAYSALE|,|Mazda MX-5 Miata HardDog Xtreme 1990-2005 - Sale! |,|HDG-X2|,|699.99|,|584.99|,||,||,|35.000 |,||,||,||,|Mazda MX-5 Miata HardDog Extreme 1990-2005
A different twist utilizing our proven mounting system. Installation is quite similar to the sport models. Fits 1990 - 2005 year models.
Features include:
* Allows full seat travel and tilt*
* Full interior height and width
* Complete use of hard top, soft top and glass rear window
* Available with a durable powdercoat finish or polished stainless steel
* Constructed of highest quality tubing 1.75" diam x .120" wall
* Laser cut 3/16" mounting plates
|,|"Select Configuration" "Select Here" "Black Powdercoat"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||MAZDA-MX-5-MIATA----HAWK-HPS-PERFORMANCE-STREET-FRONT-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda MX-5 Miata HAWK HPS Performance Street Front Brake Pads 1994-2005|,|HB149F-505|,|116.34|,|92.05|,||,||,||,||,||,||,|Mazda MX-5 Miata HAWK HPS Performance Street Front Brake Pads 1994-2005
Hawk Performance HPS Ferro-Carbon compound brake pads provide advanced braking characteristics to enhance the driving experience that motorists are looking for. This unique compound combines the safety and quality of aerospace braking technology that is used in motorsports. Hawk Performance HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most Original Equipment or standard replacement pads. This makes them more responsive and durable than most standard original brake pads.
|,|||-||MAZDA-MX-5-MIATA-HAWK-HPS-PERFORMANCE-STREET-FRONT-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Mazda MX-5 Miata HAWK HPS Performance Street Front Brake Pads for SPORT SUSPENSION 1994-2005|,|HB431F-606|,|122.80|,|102.52|,||,||,||,||,||,||,|Mazda MX-5 Miata HAWK HPS Performance Street Front Brake Pads SPORT SUSPENSION 1994-2005
Hawk Performance HPS Ferro-Carbon compound brake pads provide advanced braking characteristics to enhance the driving experience that motorists are looking for. This unique compound combines the safety and quality of aerospace braking technology that is used in motorsports. Hawk Performance HPS pads offer 20-40% more stopping power and higher resistance to brake fade than most Original Equipment or standard replacement pads. This makes them more responsive and durable than most standard original brake pads.
|,|||-||MAZDA-MX-5-MIATA-HAWK-PERFORMANCE-STREET-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata HAWK Performance Street Front Brake Pads 1994-2005|,|HB149R-505|,|133.01|,|115.45|,||,||,||,||,||,||,|Mazda MX-5 Miata HAWK Performance Street Front Brake Pads 1994-2005
“THE MASTER OF FASTER” The racers never ending goal for greatness, the art of perfection is now complemented by the latest in technology. Racing technology continues to find its way to the street, and at Hawk Performance we have found a way to make you get closer to that goal!
This was the motivation behind the development of the new Hawk High Performance Street/Race compound. We built for you to go racing on it. Dive into the next tight corner, brake later and edge past your competition, but don't put it on a trailer after you lapped the field, take your helmet off and drive to you celebratory dinner. The new Street/Race compound from Hawk Performance truly gives you that ability.
|,|||-||MAZDA-MX-5-MIATA----HAWK-PERFORMANCE-STREET-REAR-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata HAWK Performance Street Rear Brake Pads 1994-2005|,|HB159R-492|,|104.83|,|95.45|,||,||,||,||,||,||,|Mazda MX-5 Miata HAWK Performance Street Rear Brake Pads 1994-2005
“THE MASTER OF FASTER” The racers never ending goal for greatness, the art of perfection is now complemented by the latest in technology. Racing technology continues to find its way to the street, and at Hawk Performance we have found a way to make you get closer to that goal!
This was the motivation behind the development of the new Hawk High Performance Street/Race compound. We built for you to go racing on it. Dive into the next tight corner, brake later and edge past your competition, but don't put it on a trailer after you lapped the field, take your helmet off and drive to you celebratory dinner. The new Street/Race compound from Hawk Performance truly gives you that ability.
|,|||-||HAMIREMA|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Haynes Repair Manual 1990-2014|,|Hayes-Manual-978-1-62092-182-1|,|42.99|,|37.98|,||,||,|0.000 |,||,||,||,|This book is a "must have" for every Miata owner who likes to repair or tinker with their baby. Includes essential information based on a complete teardown and rebuild.
The Mazda MX-5 Miata Repair Manual 1990-2014 by Haynes covers models indicated.
WHAT YOU CAN LEARN:
With a Haynes manual, you can do it yourself…from simple maintenance to basic repairs. Haynes writes every book based on a complete teardown of the vehicle. We learn the best ways to do a job and that makes it quicker, easier and cheaper for you. Our books have clear instructions and hundreds of photographs that show each step. Whether you’re a beginner or a pro, you can save big with Haynes!
--Step-by-step procedures
--Easy-to-follow photos
--Complete troubleshooting section
--Valuable short cuts
--Color spark plug diagnosis
SUMMARY
Complete coverage for your Mazda MX-5 Miata models for 1990 thru 2014 (Does not include information specific to turbocharged models):
--Routine Maintenance
--Tune-up procedures
--Engine repair
--Cooling and heating
--Air Conditioning
--Fuel and exhaust
--Emissions control
--Ignition
--Brakes
--Suspension and steering
--Electrical systems
--Wiring diagrams
TABLE of CONTENTS:
INTRODUCTION
Chapter 1: Tune-up and routine maintenance
Chapter 2: Part A: Engine
Chapter 2: Part B: General engine overhaul procedures
Chapter 3: Cooling, heating and air conditioning systems
Chapter 4: Fuel and exhaust systems
Chapter 5: Engine electrical systems
Chapter 6: Emissions and engine control systems
Chapter 7: Part A: Manual transmission
Chapter 7: Part B: Automatic transmission
Chapter 8: Clutch and driveline
Chapter 9: Brakes
Chapter 10: Suspension and steering systems
Chapter 11: Body
Chapter 12: Chassis electrical system
Wiring Diagrams
The Mazda MX-5 Miata Repair Manual 1990-2014 by Haynes can save you money on maintenance and repair bills. Step-by-step procedures and illustrations guide you through every job, from basic maintenance and troubleshooting, to complete teardown & rebuild. Mazda Mx-5 Miata 1990 Thru 2014: Does Not Include Information Specific To Turbocharged models.
|,|||-||MAZDA-MX-5-MIATA-HIGH-PERFORMANCE-STREET-BRAKE-KIT-2006-2015|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata High Performance Street Brake Kit 2006-2015|,|61-2418|,|1,221.60|,|979.55|,||,||,|5.000 |,||,||,||,|Mazda MX-5 Miata High Performance Street Brake Kit 2006-2015
STOPTECH ROTORS AND PORTERFIELD PADS! COMBO SAVES BIG!
Our best street MX5 Miata stock size brake package. High Performance StopTech rotors and Porterfield R4S pads for street and autocross. Stainless lines for all four corners of your MX5 help eliminate a spongy brake pedal and provide a confidence inspiring feel.
The Porterfield R4S is our favorite pad for performance street and autocross use. It does dust a little, but less than Hawk pads and its carbon kevlar construction is gentler on rotors.
StopTech Sport Rotors feature a durable black e-coating on the non-swept areas of the rotor to prevent corrosion. These StopTech Sport rotors are slotted, not cross drilled! Why? Cross drilled rotors are notorious for cracking. We recommend slotted rotors, never cross drilled for ALL high performance uses and that is what we run ourselves.
Brian's MX5 Application Notes: this is a great aggressive use street and autocross brake setup...but look to our big brake kits for hardcore track work!
Brian's Miata Application Notes: this is a great aggressive use street and autocross MX5 Miata brake setup...but look to our BIG brake kits for hardcore MX5 track work! Fits with stock calipers on all 06-15.
*** Product images may differ from actual product appearance ***
|,|"Shipping and Handling" "add(+$79)"|-||-|||-||MAZDA-MX-5-MIATA-GREDDY-CAT-BACK-EXHAUST-SUPREME-SP-2016-2017|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata HKS LEGAMAX Premium ROADSTER ND5RC 2016-2020|,|hks32018-AZ010|,|899.99|,|680.00|,||,||,||,||,||,||,|Mazda MX-5 Miata HKS LEGAMAX Premium ROADSTER ND5RC 2016-2020
HKS LEGAMAX Premium ROADSTER ND5RC
Part #: hks32018-AZ010
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAMXMIHYMAXE|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|Mazda MX-5 Miata Hypertech Max Energy Sport Programmer (2008-2010)|,|MES-62003|,|571.99|,|449.95|,||,||,|0.000 |,||,||,||,|Hypertech 62003 Max Energy Sport Power Programmer
Fits 2008, 2009 and 2010, Mazda MX-5 Miata
The 62003 Max Energy Sport power programmer will enable you to extract every bit of horsepower and torque possible from every molecule of fuel. The result is more power at full throttle and better mileage at part throttle. Hypertech's engineers have made literally hundreds of dyno runs to find the optimum spark and air/fuel curves over the entire rpm range. They followed that up with extensive on track testing to make sure you get real world performance gains. The payoff that you get is maximum power, quick acceleration, smoother shifting, and better driveablility.
Mazda's factory program includes a wide-open-throttle restriction to help control wheelspin. The 62003 Max Energy Sport programmer enables you to remove this restriction so you get immediate throttle response for better 60 foot times at the drag strip and quicker ET's. Also if you have installed tires with a different speed rating from the factory tires, the 62003 Max Energy Sport will enable you to re-set your Mazda's top speed limiter to take full advantage of those new tires.
Once you've installed the 62003 Max Energy Sport, you can always restore your stock program whenever you have to take your Mazda in for dealer service. In addition, should you sell your vehicle, you should restore the factory settings so your Max Energy Sport can be used on the next Mazda you purchase. The Max Energy Sport programmer can only be used on one vehicle at a time.
Hypertech 62003
• Gets the most from the energy in the fuel you burn resulting in improved economy
• Delivers more power at wide open throttle
• Raise top speed and rev limits
• Adjust transmission shift points and firmness
• Re-calibrate speedometer for tire size or gear ratio changes
• On-line updateable with included USB cable and your own PC
• Display and clear diagnostic trouble codes
• Easy to install, plug and play, easy to use
• 50 state smog legal
Premium Octane
+ 7 Hp
+ 11 Tq
|,|||-||MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES|,||,|MAZDA MX-5 MIATA INTERIOR PARTS AND ACCESSORIES|,||,||,||,|MAZDA MX-5 MIATA INTERIOR PARTS AND ACCESSORIES|,||,||,||,||,||,|
|,|||-||MAZDA-MX-5-MIATA-INVIDIA-Q300-CATBACK-EXHAUST-ROLLED-STAINLESS-STEEL-TIP-2015-2017|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Invidia Q300 Catback Exhaust Rolled Stainless Steel Tip 2015-2020|,|invHS15MX5Q32RS|,|1,095.00|,|849.02|,||,||,||,||,||,||,|Mazda MX-5 Miata Invidia Q300 Catback Exhaust Rolled Stainless Steel Tip 2015-2020
Product Information
Invidia produces high performance parts for today's hottest tuner cars. Invidia knows that automotive enthusiasts are constantly looking for ways to extract more power from their engines and improve the driving experience. Using only the highest quality materials Invidia manufactures components that improve performance while remaining stylish. Invidia manufactures their exhaust systems specifically for each application to guarantee precise fitment and power gains. Invidia has applied their knowledge of automotive performance to a myriad of makes and models constantly refining and improving their product and design process. Invidia offers several exhaust system product lines to meet the expectations of nearly any automotive enthusiast.
Invidia catback exhaust systems are designed specifically to improve performance, they achieve this by reducing bends in the exhaust system, using larger diameter piping. The reduced restriction also gives your vehicle a more aggressive tone for the sport enthusiast to enjoy. This improves throttle response, torque, horsepower and the overall driving experience. Catback exhausts are one of the most popular mods amongst casual and hardcore automotive enthusiasts alike. Their affordability, increase in performance, improved sound, and ease of installation make catback exhaust systems a perfect modification for nearly any vehicle.
Invidia's Q300 exhaust systems feature a flat bottom muffler. The flat bottom shaped muffler design results in improved high speed aerodynamic performance. The muffler inside contains continuous piping design and use of Advantex material that results in an excellent free-flow exhaust with optimized back pressure, giving greater horsepower, torque gains and a rich deep sporty sound. The use of SUS304 polished stainless steel piping, Mandrel bent to shape, state of the art CNC machine made flange, Robot TIG welding and double wall polished stainless steel or Titanium tips, provides outstanding durability and appearance.
Features:
* Pipe Diameter: 60mm
* Tip Diameter: 110mm
* More aggressive tone than stock system
* SUS304 stainless steel construction
* Provides additional horsepower and torque over stock system
* CNC machined flanges
Fitment: Mazda Miata 2015-2017
Notes: Pictures used for marketing purposes only, actual product may vary
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MX-5-MIATA-JACK-O-LANTERN-TEETH-GRILLE-INSERT|,|NBBODYSTYLING|,|Mazda MX-5 Miata Jack O Lantern Teeth Grille Insert|,|mazda-mx-5-miata-jack-o-lantern-teeth-grille-insert|,|92.99|,|82.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Jack O Lantern Teeth Grille Insert
Ghosts and Ghouls Beware: Inspired by the quintessential Halloween symbol, this style is dramatic and bold with large features that make these teeth visible from far and wide. The headlights make perfect eyes turning the front of your car into an unmistakable face. Guaranteed to get smiles.
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
|,|||-||JET-STREAM-FRONT-LIP---DIFFUSER|,||,|Mazda MX-5 Miata Jet Stream Front Lip & Diffuser 2013-2014|,|jet-stream-front-lip---diffuser|,|510.99|,|499.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Jet Stream Front Lip & Diffuser 2013-2014
Front Lip made by Jet Stream that is used on their NC3 demo car (track tested) to improve looks & aerodynamics. It comes with an integrated underflap (diffuser) and has optional side flaps for even better aerodynamics.
* Improves aerodynamics
* Comes with front diffuser
* Makes the car look lower
* Only available for NC3 MX5s (2013-2014)
* Material: Fiberglass
|,|"Side Flaps" "No" "Yes add(+$150)"|-||-|"Shipping cost" "add(+$195)"|-||-|||-||JET-STREAM-N-ZERO-FRONT-LIP|,||,|Mazda MX-5 Miata Jet Stream N-Zero Front Lip 2009-2012|,|jet-stream-n-zero-front-lip|,|710.99|,|648.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Jet Stream N-Zero Front Lip 2009-2012
Front Lip made by Jet Stream for 2009-2012 NC MX-5s that is very aggressive looking. It was developed for Japan Roadster Cup and ran by Fuji race champion. The front lip has side canards and under-diffusers that help generate more downforce!
Please contact us if your country is not listed in the shipping destinations.
• Made of high quality FRP
• No cutting to the body needed
• Flows really well with the lines of the car
• Lightweight
• Only available for NCEC-2 MX-5 (2009-2012)
|,|"shipping cost" "add(+$185)"|-||-|||-||JET-STREAM-TAIL-LIGHTS-COVER|,|20MAMIEXLI|,|Mazda MX-5 Miata Jet Stream Tail Lights Cover 2006-2014|,|jet-stream-tail-lights-cover|,|310.99|,|275.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Jet Stream Tail Lights Cover 2006-2014
Tail lights cover made by Jet Stream from high quality FRP. Sticks onto your stock tail lights with double sided tape. Makes the rear end of the vehicle look much sleeker.
• Easy installation
• Looks great
• Made of FRP
• Available for NCEC-2 & NCEC-3 MX5s (2009-2014)
|,|"Select Year" "Select Here" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-14)"|-||-|"Select Finish" "Select Here" "FRP Unfinished" "Painted add(+$145)" "Polished Black Gel Coat add(+$75)"|-||-|"EMS Express Air Mail Shipping & Handling" "add(+$79)"|-||-|||-||MAZDA-MX-5-MIATA-LICENSE-PLATE-RELOCATION-2006-20014|,|20MAMIEXBOST|,|Mazda MX-5 Miata License Plate Relocation 2006-2018|,|CSP-903-275|,|119.99|,|98.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata License Plate Relocation 2006-2014
If you don't like how your front license plate dominates the look of your MX-5 Miata, you can relocate it with this product! This license plate mount uses the tow hook eye that's hidden behind the front bumper cover.
It's very easy to install using the existing tow hook mount on your MX-5 Miata, so there's no drilling needed! Moving your MX-5 Miata license plate away from the center of your grille also allows more air to flow into the radiator.
Black powdercoated stainless steel will last a long time. Made in the USA!
|,|||-||MAZDA-MX-5-MIATA-MAGEN-RACING-REAR-TOE-CONTROL-ARMS-2006-2015|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Magen Racing Rear Toe Control Arms 2006-2015|,|MRS-MZ-1470|,|210.00|,||,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Magen Racing Rear Toe Control Arms 2006-2015
Car alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under steer, over steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under steer and for optimum tire wear at stock height; under steer is often undesired from a performance standpoint and almost all performance driven applications are lowered.
It is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in road race, autocross and drift events to assure quality and performance.
These Toe-Control arms allow for fine-tuned adjustments to the rear toe in/out setting of the vehicle. Toe is crucial for the straight line stability and behavior of a car and is said to have more of an effect than the front toe.
Application:
Mazda MX-5 Miata NC 2006-2015
|,|||-||MAZDA-MX-5-MIATA-MAGNAFLOW-STAINLESS-CAT-BACK-SYSTEM-PERFORMANCE-EXHAUST-2015-2016|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata MagnaFlow Stainless Cat-Back System PERFORMANCE EXHAUST 2015-2016|,|MAG-19132|,|1,100.06|,|879.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata MagnaFlow Stainless Cat-Back System PERFORMANCE EXHAUST 2015-2016
SYSTEM: TYPECAT-BACK
SERIES: STREET
EXIT STYLE: C
OUTLET QTY: DUAL
TUBING DIA: 2.5 IN
TIP FINISH: POLISHED
MATERIAL: STAINLESS
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
• Made in the U.S.A.
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MAZDA-MX-5-MIATA-MAGNAFLOW-STREET-SERIES-CAT-BACK-EXHAUST-SYSTEM-2016|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Magnaflow Street Series Cat-Back Exhaust System 2016+|,|19132|,|1,190.07|,|975.00|,||,||,|10.000 |,||,||,||,|Mazda MX-5 Miata Magnaflow Street Series Cat-Back Exhaust System 2016+
* 2016+ Mazda Miata/MX-5 2.0L L4
* 2.5" Stainless Steel Tubing
* 3" Polished Stainless Steel Tip
* Dual Straight Passenger Side Rear Exit
* 4 x 4 x 14" Muffler
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MAZDA-MX-5-MIATA-MAKO-TEETH-GRILLE-INSERT|,|NBGRILLANDBRA|,|Mazda MX-5 Miata Mako Teeth Grille Insert|,|mazda-mx-5-miata-mako-teeth-grille-insert|,|92.99|,|82.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Mako Teeth Grille Insert
Time for a Shark Attack
A car with these teeth gets attention. The shark has survived millenia as an efficient carnivore, striking fear into lesser creatures. Nothing symbolizes power quite like the shark's gaping maw or razor sharp teeth, and you'll probably get a little more room on the road by sporting them yourself.
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
See Installation Tab for more details
* Lights NOT included *
|,|||-||CARBON-MAZDASPEED-REAR-LIP-NB|,||,|Mazda MX-5 Miata Mazdaspeed Rear Lip 1999-2005|,|CM-CMCF76|,|260.00|,|179.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Mazdaspeed Rear Lip 1999-2005
*Carbon Fiber Pictured
*Please allow 6-8 weeks for production
This carbon fiber lip is the replica of the famous Mazdaspeed lip and is part of the MSM bodykit. Made with high quality carbon fiber, it only weighs 1.2 KG.
There is no exhaust cutout as most people run custom exhaust. You will have to make the cutout yourself or with the help of a professional.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Material" "Fiberglass" "Carbon Fiber add(+$115)" "Carbon Kevlar add(+$140)"|-||-|"EMS Shipping Cost" "add(+$130)"|-||-|||-||MAZDA-MX-5-MIATA-MEGAN-RACING-EZII-SERIES-COILOVER-SYSTEM-2016|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Megan Racing EZII Series Coilover System 2016+|,|MR-CDK-MMX516-EZII|,|999.00|,|899.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Megan Racing EZII Series Coilover System 2016+
Megan Racing EZII Series coilover system is aimed towards the more budget oriented enthusiast to offer the most basic essentials from an after-market coil-over setup, yet makes no compromises for quality and performance.
SPECIFICATIONS & FEATURES:
- 15 Levels of Adjustable Damper Strength
- Rubber Dust Covers
- Adjustable Ride Height
- Conservative Spring Rates
- Single-Cylinder Design
- All coilover damper kits come with 1 year manufacture-defect warranty.
- All Hardware is Included
|,|"Shipping & handling fee" "add(+$95)"|-||-|||-||MAZDA-MX-5-MIATA-MEGAN-RACING-FRONT-SWAY-BAR-2015|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Megan Racing Front Sway Bar 2015+|,|MRS-MZ-1890|,|229.00|,|199.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Megan Racing Front Sway Bar 2015+
Megan Racing sway bars improve dynamic balance and behavior characteristics by reducing overall body roll and increasing steering response. With adjustable sway bar end-link mounting points, fine tuning of the effect and intensity of vehicle dynamics may be achieved.
Specifications:
Diameter 25.4mm
Features:
-Heat treated hollow bar
-2-way adjustable
-Thermopastic Vulcanized (TPV) sway bar bushings included
-Increase handling response through body roll reduction
-Correction of understeer or oversteer behavioral characteristics.
|,|"Application" "Mazda MX-5 Miata 15+"|-||-|||-||MAZDA-MX-5-MIATA-REAR-SWAY-BAR-2015|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Megan Racing Rear Sway Bar 2015+|,|MRS-MZ-1891|,|169.00|,|149.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Megan Racing Rear Sway Bar 2015+
Megan Racing sway bars improve dynamic balance and behavior characteristics by reducing overall body roll and increasing steering response. With adjustable sway bar end-link mounting points, fine tuning of the effect and intensity of vehicle dynamics may be achieved.
Specifications: Diameter 15mm
Features:
-Heat treated hollow bar
-2-way adjustable
-Thermopastic Vulcanized (TPV) sway bar bushings included
-Increase handling response through body roll reduction
-Correction of understeer or oversteer behavioral characteristics.
|,|"Application" "Mazda MX-5 Miata 15+"|-||-|||-||MAZDA-MX-5-MIATA-MEGAN-RACING-REAR-UPPER-RACE-SPEC-STRUT-TOWER-BAR-1990-2005|,|19MAMISUANDS1|,|Mazda MX-5 Miata Megan Racing Rear Upper Race-Spec Strut Tower Bar 1990-2005|,|MR-SB-MMX590RU-1P|,|119.95|,|99.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Megan Racing Rear Upper Race-Spec Strut Tower Bar 1990-2005
One-Piece Race Spec Strut Tower Bar constructed of strong Aluminum to extremely tight tolerances and then polished to perfection. Designed to tie the chassis from left to right at critical stress points (Between the shock/strut towers).
As you drive and maneuver, your car undergoes many different forces that the chassis of the car absorbs; the brace helps to absorb the energy and directs these forces into your suspension components so that they can better do their job and serve their purpose more effectively.
A must for any track-driven, and a great addition to any street or show car, this bar truly lives up to the Megan Racing name.
|,|"Application" "Mazda MX-5 Miata 1990-2005"|-||-|||-||MAZDA-MX-5-MIATA-MIDDLE-SECTION-PIPES-2015-|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Middle Section Pipes 2015+|,|MIDPIPE-MMX515|,|549.99|,|402.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Middle Section Pipes 2015
Designed as an OEM replacement Mid-Pipe that can be used in conjunction with the OEM Axle-Back section or any aftermarket Axle-Back system. These Racing mid-pipe is constructed of durable T-304 Stainless Steel that is lighter than the OEM piping and has smoother mandrel bends.
The Perforated Core resonator is perfect for reducing noise and interior resonance without sacrificing performance while the larger 2.5" piping increases performance through-out the Mid-to-Upper end of the powerband.
- 2.5" Piping
NOTE: These Mazda MX-5 Miata Middle Section Pipes 2015+ product are deemed for "off-road use only"-- please check local laws regarding the modification of the exhaust systems by checking the vehicle code for your state. Many states are more stringent on exhaust modification laws and to pass SMOG. Please check your local laws.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MAZDA-MX-5-MIATA-THERMOSTATIC-OIL-COOLER-KIT-2016|,|MIATA-MAINTENANCE-2016-|,|Mazda MX-5 Miata Mishimoto Thermostatic Oil Cooler Kit - Black 2016+|,|MMOC-MIA-16TBK|,|795.00|,|684.90|,||,||,||,||,||,||,|Mazda MX-5 Miata Mishimoto Thermostatic Oil Cooler Kit Black 2016+
* Direct-fit for the 2016+ Mazda MX-5 Miata
* Increase in Oil Capacity: 0.75 quarts / Temperature Difference: 57°F / Pressure Drop: 3-5 psi
* Application-specific mounting brackets mount the oil cooler in the front bumper
* Thermostatic and non-thermostatic options available
* Color: Black
* Mishimoto Lifetime Warranty
|,|||-||MAZDA-MX-5-MIATA-MISHIMOTO-THERMOSTATIC-OIL-COOLER-KIT-SILVER-2016|,|MIATA-MAINTENANCE-2016-|,|Mazda MX-5 Miata Mishimoto Thermostatic Oil Cooler Kit - Silver 2016+|,|MMOC-MIA-16T|,|795.00|,|684.90|,||,||,||,||,||,||,|Mazda MX-5 Miata Mishimoto Thermostatic Oil Cooler Kit Silver 2016+
* Direct-fit for the 2016+ Mazda MX-5 Miata
* Increase in Oil Capacity: 0.75 quarts / Temperature Difference: 57°F / Pressure Drop: 3-5 psi
* Application-specific mounting brackets mount the oil cooler in the front bumper
* Thermostatic and non-thermostatic options available
* Color: Silver
* Mishimoto Lifetime Warranty
|,|||-||MS-215-433|,|MIGIMOVIALL|,|Mazda MX-5 Miata NEW Design Parking Only Sign 1990-2005|,|ms-215-433|,|24.95|,|20.99|,||,||,||,||,||,||,|Mazda MX-5 Miata NEW Design Black Parking Only Sign 1990-2005
All of our parking signs for four generations of Miata have:
-Sturdy Design
-Easy to read text
-Indoor and outdoor use
-Durable and very detailed finish
-Holes drilled at top and bottom for easy mounting
|,|"Select Year" "Select Here" "1990-1997" "1999-2005"|-||-|"Select Color" "Select Here" "Black" "Blue" "Green" "Red"|-||-|||-||NOPRO-COOLING-HOOD|,|20MIMIEXPA|,|Mazda MX-5 Miata NOPRO Cooling Hood 2006-2014|,|nopro-cooling-hood|,|1,950.99|,|1,399.05|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata NOPRO Cooling Hood 2006-2014
The NOPRO Cooling Hood has vents on the left and right side of the hood to vent the heat outside the engine bay and stabilize water temperature and oil temperature. It is made for racing, but also improves the look of the NC MX-5!
Please contact us if your country is not listed in the shipping destinations.
• Easy installation
• Made of high quality FRP or Carbon Fiber
• Includes rain guard
• Fits NC MX-5 (2006-2014)
|,|"Select Year" "Select Here" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-14)"|-||-|"Select Finish" "Select Here" "Carbon Fiber - add(+$450)" "FRP (Black Gel Coat)"|-||-|"Shipping cost" "add(+$659)"|-||-|||-||MAZDA-MX-5-MIATA-O2-OXYGEN-SENSOR-REAR-2001-2005-1-8L|,|19MAMIEXVEAL1|,|Mazda MX-5 Miata O2 Oxygen Sensor Rear 2001-2005 1.8L Replaces Mazda BP6F-18-861B-9U|,|NAB-7258|,|203.45|,|91.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata O2 Oxygen Sensor Rear 2001-2005 1.8L Replaces Mazda BP6F-18-861B-9U
Replacement Oxygen Sensor for 2001-2005 Mazda MX-5 Miatas. This Oxygen Sensor is located aft of the manifold. Replaces Mazda BP6F-18-861B-9U
Rear, 4 Wire, OEM connector Plug and Play With Insulation Grommet.
|,|||-||MAMIO2SE1919|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Mazda MX-5 Miata O2 Sensor 1996 - 1997 1.8 Rear After Cat Direct Fit Replaces BPS1-18-86ZB-9U|,|NAB-7251|,|222.90|,|89.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata O2 Sensor 1996 - 1997 1.8 Rear After Cat Direct Fit Replaces BPS1-18-86ZB-9U
Replacement Rear Oxygen Sensor Bank 2 for 1996 & 1997 Mazda MX-5 Miatas After Converter. The oxygen sensor is a critical component of the automotive fuel injection system; it constantly measures the oxygen content in the exhaust gas and helps the ECU (Vehicle Computer) ensure optimal engine operation at an industry standard of 14.7.1.
Most importantly, too much oxygen in air/fuel ratio means the engine is running lean which is less than optimal causing reduced engine performance and damaging detonation.
Oppositely, if there is too little oxygen in the ratio it means the engine is running rich and wasting excessive fuel and creating excess emission. Both conditions may shorten the lifespan of a vehicle's engine and catalytic converter.
These Oxygen Sensors are the result of rigorous testing on and off track to produce Oxygen Sensors that operate consistently at OE specifications; as such they increase vehicle's engine performance, lower vehicle emissions, and improve vehicle's fuel economy. To ensure longer sensor lifecycles and vehicle safety, this sensor is produced with premium materials that protect the sensor against the harsh environment inside of the exhaust pipe, which cause premature sensor failure in common in mass produced units. In addition, these sensors are tested against the sensor's function parameters to guarantee the highest quality and stability for even the most discerning Miata owners.
Unlike troublesome universal units, ours does not require any cutting or splicing as all our Miata o2 Sensors feature original style plug and play harnesses. Additionally, these sensors are in the Rounded hole, frontal tube, OS5 Japanese type just like the OEM units that where factory equipped with you Mazda Miata.
This Oxygen Sensor fits the Mazda Miata MX-5 1996-1997 1.8L Bank 2 after Catalytic Converter located on the exhaust system mid pipe. Replaces Mazda BPS1-18-86ZB-9U . Unlike other replacement o2 sensors for the Miata, ours features an insulating body grommet like the original factory unit to keep out noise and debris.
|,|||-||MAZDA-MX-5-MIATA-O2-SENSOR-1999-2000-REAR-AFTER-CAT|,|19MAMIEXVEAL1|,|Mazda MX-5 Miata O2 Sensor 1999 & 2000 Rear After Cat Direct Fit Replaces Mazda BP3B-18-86Z-9U|,|NAB-7255|,|222.90|,|88.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata O2 Sensor 1999 & 2000 Rear After Cat Direct Fit Replaces Mazda BP3B-18-86Z-9U
The oxygen sensor is a critical component of the automotive fuel injection system; it constantly measures the oxygen content in the exhaust gas and helps the ECU (Vehicle Computer) ensure optimal engine operation at an industry standard of 14.7.1.
Most importantly, too much oxygen in air/fuel ratio means the engine is running lean which is less than optimal causing reduced engine performance and damaging detonation. Oppositely, if there is too little oxygen in the ratio it means the engine is running rich and wasting excessive fuel and creating excess emission. Both conditions may shorten the lifespan of a vehicle's engine and catalytic converter.
This Oxygen Sensors are the result of rigorous testing on and off track to produce Oxygen Sensors that operate consistently at OE specifications; as such they increase vehicle's engine performance, lower vehicle emissions, and improve vehicle's fuel economy. To ensure longer sensor lifecycles and vehicle safety, every sensors is produced with premium materials that protect the sensor against the harsh environment inside of the exhaust pipe, which cause premature sensor failure in common in mass produced units. In addition, all 02s are tested against the sensor's function parameters to guarantee the highest quality and stability for even the most discerning Miata owners.
Unlike troublesome universal units, ours does not require any cutting or splicing as all our Miata o2 Sensors feature original style plug and play harnesses. Additionally, we build all O2 Sensors in the Rounded hole, frontal tube, OS5 Japanese type just like the OEM units that where factory equipped with you Mazda Miata.
This Oxygen Sensor fits the Mazda Miata MX-5 1999 & 2000 1.8L Bank 2 after Catalytic Converter located on the exhaust system mid pipe. Replaces Mazda BP3B-18-86Z-9U . Unlike other replacement o2 sensors for the Miata, ours features an insulating body grommet like the original factory unit to keep out noise and debris.
|,|||-||MAZDA-MX-5-MIATA-O2-SENSOR-1999-2000-1-8-FRONT-PRE-CAT|,|19MAMIEXVEAL1|,|Mazda MX-5 Miata O2 Sensor 1999 - 2000 1.8 Front Pre Cat - Direct Fit Replaces Mazda BP4X-18-861A-9U|,|NAB-7254|,|212.46|,|87.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata O2 Sensor 1999 - 2000 1.8 Front Pre Cat - Direct Fit Replaces Mazda BP4X-18-861A-9U
This Oxygen Sensor for is 1999-2000 1.8L Mazda Miata MX-5. Bank 1: replaces Mazda BP4X-18-861A-9U the first o2 which is located at exhaust manifold.
The oxygen sensor is a critical component of the automotive fuel injection system; it constantly measures the oxygen content in the exhaust gas and helps the ECU (Vehicle Computer) ensure optimal engine operation at an industry standard of14.7.1.
Most importantly, too much oxygen in air/fuel ratio means the engine is running lean which is less than optimal causing reduced engine performance and damaging detonation. Oppositely, if there is too little oxygen in the ratio it means the engine is running rich and wasting excessive fuel and creating excess emission. Both conditions may shorten the lifespan of a vehicle's engine and catalytic converter.
This Oxygen Sensors are the result of rigorous testing on and off track to produce Oxygen Sensors that operate consistently at OE specifications; as such they increase vehicle's engine performance, lower vehicle emissions, and improve vehicle's fuel economy. To ensure longer sensor lifecycles and vehicle safety, these O2 sensors is produced with premium materials that protect the sensor against the harsh environment inside of the exhaust pipe, which cause premature sensor failure in common in mass produced units. In addition, all 02s are tested against the sensor's function parameters to guarantee the highest quality and stability for even the most discerning Miata owners.
Unlike troublesome universal units, ours does not require any cutting or splicing as all our Miata o2 Sensors feature original style plug and play harnesses. Additionally, we build all o2 Sensors in the Rounded hole, frontal tube, OS5 Japanese type just like the OEM units that where factory equipped with you Mazda MX-5 Miata .
|,|||-||MAZDA-MX-5-MIATA-O2-SENSOR-FOR-MIATA-2001-2005-1-8-FRONT-PRE-CAT|,|19MAMIEXVEAL1|,|Mazda MX-5 Miata O2 Sensor for Miata 2001-2005 1.8 Front Pre Cat - Direct Fit BP6F-18-861B-9U8|,|NAB-7259|,|212.46|,|87.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata O2 Sensor for Miata 2001-2005 1.8 Front Pre Cat - Direct Fit BP6F-18-861B-9U8
Oxygen Sensor for 2001-2005 1.8L Mazda MX-5 Miata. Bank 1: replaces Mazda BP6F-18-861B-9U the first O2 which is located at exhaust manifold.
The oxygen sensor is a critical component of the automotive fuel injection system; it constantly measures the oxygen content in the exhaust gas and helps the ECU (Vehicle Computer) ensure optimal engine operation at an industry standard of 14.7.1.
Most importantly, too much oxygen in air/fuel ratio means the engine is running lean which is less than optimal causing reduced engine performance and damaging detonation. Oppositely, if there is too little oxygen in the ratio it means the engine is running rich and wasting excessive fuel and creating excess emission. Both conditions may shorten the lifespan of a vehicle's engine and catalytic converter.
This Oxygen Sensors are the result of rigorous testing on and off track to produce Oxygen Sensors that operate consistently at OE specifications; as such they increase vehicle's engine performance, lower vehicle emissions, and improve vehicle's fuel economy. To ensure longer sensor lifecycles and vehicle safety, every O2 sensors is produced with premium materials that protect the sensor against the harsh environment inside of the exhaust pipe, which cause premature sensor failure in common in mass produced units. In addition, all of our 02s are tested against the sensor's function parameters to guarantee the highest quality and stability for even the most discerning Mazda MX-5 Miata owners.
Unlike troublesome universal units, ours does not require any cutting or splicing as all our Mazda Miata O2 Sensors feature original style plug and play harnesses. Additionally, we build all O2 Sensors in the Rounded hole, frontal tube, OS5 Japanese type just like the OEM units that where factory equipped with your Mazda Miata MX-5.
|,|||-||AC-TUBE|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM AC Tube 2006-2015|,|ac-tube|,|0.01|,|0.01|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM AC Tube 2006-2015
|,|"4. AC Tube CONDENSER - NE51-61-464A" "Select Here" "Yes add(+$64.02)"|-||-|"5. AC Tube HIGH PRESSURE - NE51-61-46XA" "Select Here" "Yes add(+$129.02)"|-||-|"6. AC Tube LOW PRESSURE - NE51-61-466C" "Select Here" "Yes add(+$119.02)"|-||-|||-||PEES-13-3A0|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Air Filter 2016+|,|PEES-13-3A0|,|20.14|,|17.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Air Filter 2016+
#4 in the diagram
|,|||-||P301-15-909C|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Alternator Belt 2016+|,|P301-15-909C|,|40.92|,|32.95|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Serpentine Belt 2016+
REFERENCE #5 IN ILLUSTRATION
|,|||-||MA04-25-60XB|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM AXLE ASSEMBLY 2006-2015|,|ma04-25-60xb|,|406.57|,|332.04|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM AXLE ASSEMBLY 2006-2015
#1 on the Diagram
|,|"Select Side" "Select Here" "Driver's Side - MA04-25-60XB" "Passenger's Side - MA04-25-50XB add($175)"|-||-|||-||NH18-50-1T1B|,|20MIMIEXPA|,|MAZDA MX-5 MIATA OEM BAR TYPE GRILLE & COMPONENTS 2009-2015|,|NH18-50-1T1B|,|155.59|,|124.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM GRILLE & COMPONENTS 2009-2015
PRODUCT DETAILS
Description: 2009-12, bar type.
Manufacturer: Genuine Mazda Original Parts
#1 on the diagram
|,|"Do you want Low Note Horn Bolt - 9947-90-620?" "Select Here" "Yes add(+$1.25)"|-||-|||-||NE51-61-B10|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM BLOWER ASSEMBLY 2006-2015|,|ne51-61-b10|,|197.49|,|169.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM BLOWER ASSEMBLY 2006-2015
Other Names: Blower Motor, Motor Fan-Blower Unit
Description: Miata mx5.
Notes: Included With Evaporator Assembly.
Manufacturer: Genuine Mazda Original Parts
|,|||-||HYDRAULIC-SYSTEM-PART|,||,|Mazda MX-5 Miata OEM BRAKES/HYDRAULIC SYSTEM 2016+|,|hydraulic-system-part|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM BRAKES/HYDRAULIC SYSTEM 2016+
Please shop by the numbers on the diagram
|,|"1. Master Cylinder AUTO TRANS - NAYL-43-40Z" "Select Here" "Yes add(+$210.95)"|-||-|"1. Master Cylinder MANUAL TRANS - NAYJ-43-40ZA" "Select Here" "Yes add(+$210.95)"|-||-|"2. Reservoir Cap - KD33-43-55YD" "Select Here" "Yes add(+$3.77)"|-||-|"3. Mount Bracket - NA1R-43-741A" "Select Here" "Yes add(+$6.67)"|-||-|"5. Power Booster - NAYJ-43-80Z" "Select Here" "Yes add(+$142.95)"|-||-|"8. Harness - N243-43-754" "Select Here" "Yes add(+$11.50)"|-||-|"10. Vacuum Pump - N243-43-7H0A" "Select Here" "Yes add(+$238.05)"|-||-|||-||STABILITY-CONTROL-PART|,||,|Mazda MX-5 Miata OEM BRAKES/STABILITY CONTROL 2016+|,|stability-control-part|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM BRAKES/STABILITY CONTROL 2016+
Please ship by the numbers on the diagram
|,|"1. Modulator Valve ABS Control Unit - NAYJ-43-7A0E" "Select Here" "Yes add(+$568.95)"|-||-|"2. ABS Control Unit Grommet - D10G-43-7A6" "Select Here" "Yes add(+$4.99)"|-||-|"3. ABS Control Unit Bracket - NA1J-43-310" "Select Here" "Yes add(+$9.59)"|-||-|"5. Yaw Sensor Control Unit - N243-43-7B0A" "Select Here" "Yes add(+$333.85)"|-||-|"7. Bracket - N244-43-740" "Select Here" "Yes add(+$4.33)"|-||-|||-||NE55-39-710|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM CENTER BAR 2006-2015|,|ne55-39-710|,|605.85|,|499.05|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM CENTER BAR 2006-2015
#8 on the Diagram
Other Names: Power Plant Frame
|,|"Center Bar Nut - 9YB0-4A-401" "Select Here" "Yes add(+$7.95)"|-||-|||-||PE32-16-460|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM Clutch Disc 2016+|,|pe32-16-460|,|191.62|,|152.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Disc 2016+
Other Names: Clutch Disc
Manufacturer: Genuine Mazda Original Parts
NOTE: Picture shown is for illustration purpose only. Actual product may vary.
|,|"Select Year" "Select Here" "2016-2019 add(+$85)" "2020-2022"|-||-|||-||N251-41-380|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM Clutch Flex Hose 2016+|,|N251-41-380|,|33.68|,|28.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Clutch Flex Hose 2016+
Other Names: Hose Flexible
Description: Miata mx5.
Manufacturer: Genuine Mazda Original Parts
|,|||-||N243-41-421|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM Clutch Hydraulic Lines 2016+|,|n243-41-421|,|44.50|,|37.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Clutch Hydraulic Lines 2016+
Other Names: Hose Reserve
Description: Miata mx5. Flex hose to slave cyl.
Manufacturer: Genuine Mazda Original Parts
|,|||-||NA1J-45-510|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM Clutch Hydraulic Lines 2016+|,|na1j-45-510|,|29.67|,|26.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Clutch Hydraulic Lines 2016+
Other Names: Pipe Clutch
Description: Miata mx5. Master cyl to flex hose.
Manufacturer: Genuine Mazda Original Parts
|,|||-||YF09-11-303|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM CLUTCH PILOT BEARING 2012-2015|,|yf09-11-303|,|15.60|,|11.70|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM CLUTCH PILOT BEARING 2012-2015
Other Names: Bearing Pilot
|,|||-||LF01-16-510|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM Clutch Release Bearing 2016-2023|,|LF01-16-510|,|68.32|,|56.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Clutch Release Bearing 2016-2023
#4 in ILLUSTRATION
Manufacturer: Genuine Mazda Original Parts
|,|||-||G607-16-520A|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM CLUTCH RELEASE FORK 2006-2015|,|G607-16-520A|,|32.75|,|25.95|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM CLUTCH RELEASE FORK 2006-2015
Other Names: Fork Release
|,|||-||P501-16-520|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM Clutch Release Fork 2016+|,|p501-16-520|,|34.94|,|28.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Clutch Release Fork 2016+
Other Names: Fork Clutch Release
Manufacturer: Genuine Mazda Original Parts
|,|||-||NA9B-34-011|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Coil Spring 2016-2019+|,|NA9B-34-011|,|79.78|,|63.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Coil Spring 2016-2019+
#4 IN ILLUSTRATION
|,|"Select Transmission" "Select Here" "Manual" "Automatic"|-||-|||-||MA02-27-120A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM COMPANION FLANGE 2006-2016|,|ma02-27-120a|,|156.91|,|106.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM COMPANION FLANGE 2006-2016
#12 on the Diagram
Other Names: Flange Companion
|,|"Select Option" "Select Here" "Auto trans. Without limited slip - MA02-27-120A" "Manual trans. Without limited slip - MA03-27-120B add(+$45)" "With limited slip - MA04-27-120A add(+$35)"|-||-|||-||NE51-61-480C|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM CONDENSER 2006-2015|,|ne51-61-480c|,|575.20|,|480.05|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM CONDENSER 2006-2015
|,|"Do you want Dehydrator - NE51-61-501?" "Select Here" "Yes add(+$50.95)"|-||-|||-||LF94-11-400|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM CRANKSHAFT PULLEY 2006-2015|,|lf94-11-400|,|189.76|,|137.15|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM CRANKSHAFT PULLEY 2006-2015
|,|"Crankshaft Pulley Bolt (LF01-11-406)" "Select Here" "Yes add(+$18.95)"|-||-|||-||P507-11-400|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Crankshaft Pulley 2016+|,|P507-11-400|,|170.02|,|139.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Crankshaft Pulley 2016+
|,|||-||CRUISE-CONTROL-PART|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM CRUISE CONTROL 2016+|,|cruise-control-part|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM CRUISE CONTROL 2016+
Please see the numbers on the diagram to make an order.
|,|"1. Steering Wheel W/O LEATHER - N243-32-982-02" "Select Here" "Yes add(+$112)"|-||-|"1. Steering Wheel with LEATHER - N244-32-982-02" "Select Here" "Yes add(+$689)"|-||-|"2. Steering Wheel Nut - 9994-81-200" "Select Here" "Yes add(+$5.21)"|-||-|"3. Rear Cover W/SHIFT PADDLES - N245-32-049-02" "Select Here" "Yes add(+$25.02)"|-||-|"3. Rear Cover W/O SHIFT PADDLES - N243-32-049-02" "Select Here" "Yes add(+$25.02)"|-||-|"4. Front Cover W/O LEATHER - N243-32-983" "Select Here" "Yes add(+$59.02)"|-||-|"4. Front Cover W/LEATHER - N244-32-983" "Select Here" "Yes add(+$59.02)"|-||-|"5. Shift Paddle - N243-66-3P0" "Select Here" "Yes add(+$59.02)"|-||-|"7. Control Switch W/O LEATHER - N243-66-4M0" "Select Here" "Yes add(+$89.02)"|-||-|"7. Control Switch W/LEATHER, W/SHIFT PADDLES - NA8W-66-4M0A" "Select Here" "Yes add(+$152.02)"|-||-|"7. Control Switch W/LEATHER, W/O SHIFT PADDLES - NA1L-66-4M0A" "Select Here" "Yes add(+$152.02)"|-||-|||-||MA29-27-150B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM DIFFERENTIAL CARRIER HOUSING 2006-2015|,|ma29-27-150b|,|234.67|,|182.02|,||,||,||,||,||,||,| Mazda MX-5 Miata OEM DIFFERENTIAL CARRIER HOUSING 2006-2015
#4 on the Diagram
|,|||-||MA31-27-200|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM DIFFERENTIAL CASE 2006-2015|,|ma31-27-200|,|485.46|,|407.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM DIFFERENTIAL CASE 2006-2015
#5 on the Diagram
Other Names: Differential
Notes: Includes Pinion Shaft, Pinion And Side Gears.
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "Without limited slip" "With limited slip - MS03-27-200B add(+$415)"|-||-|||-||MA29-27-320|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM DIFFERENTIAL COVER 2006-2015|,|ma29-27-320|,|115.60|,|93.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM DIFFERENTIAL COVER 2006-2015
#9 on the Diagram
Other Names: Axle Cover, Cover Rear
|,|||-||LFE2-10-450D|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM DIPSTICK 2006-2015|,|LFE2-10-450D|,|19.04|,|16.98|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM DIPSTICK 2006-2015
PRODUCT DETAILS
#23 on the Diagram
Other Names: Gauge Oil Level
Manufacturer: Genuine Mazda Original Parts
|,|||-||P301-10-450|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Dipstick 2016+|,|P301-10-450|,|16.63|,|14.22|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Dipstick 2016+
REFERENCE #11 IN DIAGRAM
|,|||-||EGR-SYSTEM-PART|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM EMISSION SYSTEM/EGR SYSTEM 2006-2014|,|egr-system-part|,|0.01|,|0.01|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM EMISSION SYSTEM/EGR SYSTEM 2006-2014
|,|"1. Egr Valve - LFE2-20-300C" "Select Here" "Yes add(+$258.01)"|-||-|"2. Egr Valve Gasket - LF01-20-305" "Select Here" "Yes add(+$12.95)"|-||-|"3. Egr Pipe - LFE2-20-310B" "Select Here" "Yes add(+$54.02)"|-||-|"8. Separator - LF50-13-570A" "Select Here" "Yes add(+$54.05)"|-||-|"9. Separator Gasket - LF01-10-2C8" "Select Here" "Yes add(+$17.95)"|-||-|||-||N243-34-80XE|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Engine Cradle Cross-member 2016-2019+|,|N243-34-80XE|,|1,113.76|,|922.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Engine Cradle Cross-member 2016-2019+
#14 IN ILLUSTRATION
|,|"Freight cost" "add(+$305)"|-||-|||-||NE51-61-J10|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM EVAPORATOR CORE 2006-2015|,|ne51-61-j10|,|313.41|,|269.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM EVAPORATOR CORE 2006-2015
|,|||-||EXHAUST-MANIFOLD-PART|,|20MAMIEXHECO|,|MAZDA MX-5 MIATA OEM EXHAUST MANIFOLD 2008-2015|,|LFZJ-20-50XB|,|739.95|,|609.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM EXHAUST MANIFOLD 2008-2015
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Manual Transmission" "Auto Transmission add(+$195)"|-||-|"Shipping cost" "add(+$95)"|-||-|||-||L5A8-10-250|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Filler Cap 2016+|,|L5A8-10-250|,|6.95|,|4.95|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Filler Cap 2016+
|,|||-||NA1J-42-210|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Filler Pipe 2016+|,|NA1J-42-210|,|125.55|,|98.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Filler Pipe 2016+
|,|||-||OEM-NAYF-33-28Z|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM FRONT Brake Pads 2016+|,|OEM-NAYF-33-28Z|,|195.99|,|149.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM FRONT Brake Pads 2016+
Manufacturer: Genuine Mazda Original Parts
NOTE: Picture shown is for illustration purpose only. Actual product may vary.
|,|"Select Brake Option" "Select Here" "Without Brembo Brakes" "With Brembo Brakes add(+$155)"|-||-|"Do you want Brake Insulator Kit?" "Select Here" "No" "Yes add(+$35)"|-||-|||-||BRAKES-PART|,||,|Mazda MX-5 Miata OEM FRONT BRAKE PARTS I 2016+|,|brakes-part|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM BRAKE PARTS 2016+
Please shop by the numbers on the diagram.
|,|"1. Rotor, W/O BREMBO BRAKES - N251-33-251" "Select Here" "Yes add(+$78.01)"|-||-|"5. Caliper Assembly, LEFT W/O BREMBO BRAKES - NAYJ-33-99ZB" "Select Here" "Yes add(+$215.05)"|-||-|"5. Caliper Assembly, RIGHT W/O BREMBO BRAKES - NAYJ-33-98ZB" "Select Here" "Yes add(+$215.05)"|-||-|"6. aliper Bleeder Screw W/O BREMBO BRAKES - GHP9-33-691" "Select Here" "Yes add(+$3.05)"|-||-|"9. Front Brake Pads W/O BREMBO BRAKES - NAYJ-33-28ZA" "Select Here" "Yes add(+$105.95)"|-||-|"10. Insulator Kit W/O BREMBO BRAKES - N2Y3-33-29ZC" "Select Here" "Yes add(+$21.95)"|-||-|"11. Front ABS Sensor, RIGHT - N243-43-70XB" "Select Here" "Yes add(+85.95)"|-||-|"12. Brake Hose, LEFT W/O BREMBO BRAKES - N243-43-990" "Select Here" "Yes add(+$55.95)"|-||-|"12. Brake Hose, RIGHT W/O BREMBO BRAKES - N243-43-980" "Select Here" "Yes add(+$55.95)"|-||-|"14. Brake Hose Bolt, RIGHT W/O BREMBO BRAKES" "Select Here" "Yes add(+$4.55)"|-||-|||-||BRAKE-PARTS-III|,||,|Mazda MX-5 Miata OEM FRONT BRAKE PARTS II 2016+|,|brake-parts-iii|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM BRAKE PARTS III 2016+
Please Shop by the numbers on the diagram
|,|"2. Hub Assembly W/BREMBO BRAKES - N243-33-04X" "Select Here" "Yes add(+$170.95)"|-||-|"3. Wheel Stud W/BREMBO BRAKES - D10A-33-062" "Select Here" Yes add(+$3.04)"|-||-|"4. Splash Shield, RIGHT W/BREMBO BRAKES - N243-33-261" "Select Here" "Yes add(+$6.75)"|-||-|"4. Splash Shield, LEFT W/BREMBO BRAKES - N243-33-271" "Select Here" "Yes add(+$6.75)"|-||-|"5. Caliper Assembly, LEFT W/BREMBO BRAKES - NAYF-33-99Z" "Select Here" "Yes add(+$524.05)"|-||-|"5. Caliper Assembly, RIGHT W/BREMBO BRAKES - NAYF-33-98Z" "Select Here" "Yes add(+$524.05)"|-||-|"6. Caliper Assembly Bleeder Screw - NA5F-33-691" "Select Here" "Yes add(+$11.01)"|-||-|"7. Caliper Assembly Cap - NA5F-33-693" "Select Here" "Yes add(+$7.88)"|-||-|"8. Caliper Assembly Pin - NA5F-33-696" "Select Here" "Yes add(+$22.85)"|-||-|"9. Caliper Assembly Retainer Clip W/BREMBO BRAKES - NA5F-33-231" "Select Here" "Yes add(+$23.05)"|-||-|"10. Brake Pads W/BREMBO BRAKES - NAYF-33-28Z" "Select Here" "Yes add(+$208.95)"|-||-|"11. Insulator Kit W/BREMBO BRAKES - NAYF-33-29Z" "Select Here" "Yes add(+$22.85)"|-||-|"12. ABS Sensor - N243-43-73XB" "Select Here" "Yes add(+$79.25)"|-||-|"15. Hose Bolt W/BREMBO BRAKES - B001-43-694A" "Select Here" "Yes add(+$4.55)"|-||-|||-||BP6F-18-861B-9U|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata OEM FRONT O2 OXYGEN SENSOR 2001-2005|,|BP6F-18-861B-9U|,|282.09|,|229.05|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM FRONT O2 OXYGEN SENSOR 2001-2005
Positions: Front, Without turbo
|,|||-||N251-33-251|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM FRONT Rotor 2016+|,|N251-33-251|,|109.95|,|96.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM FRONT Rotor 2016+
Positions: Left, Right Other
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "Without BREMBO BRAKES" "With BREMBO BRAKES add(+$109)"|-||-|||-||SUSPENSION-COMPONENTS-PART|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Mazda MX-5 Miata OEM FRONT Seal Plate 2016-2019+|,|N243-34-653A|,|9.30|,|7.95|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM FRONT Plate 2016-2019+
#13 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|"Do You Want Seal Plate Retainer Clip?" "Select Here" "Yes add(+$2.50)"|-||-|||-||NA8W-34-700B|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Front Strut 2016-2019+|,|NA8W-34-700B|,|285.02|,|129.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Front Strut 2016-2019+
#3 IN ILLUSTRATION
|,|"Select Transmission" "Select Here" "Automatic" "Manual add(+$105)"|-||-|||-||PE01-13-ZE1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Fuel Filter 2016+|,|PE01-13-ZE1|,|31.02|,|26.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Fuel Filter 2016+
|,|||-||PE03-13-350|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Fuel Pump 2016+|,|PE03-13-350|,|385.24|,|292.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Fuel Pump 2016+
|,|||-||P59W-13-35XA|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Fuel Pump Assembly 2016+|,|p59w-13-35xa|,|338.79|,|262.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Fuel Pump Assembly 2016+
|,|||-||NA1J-42-110|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Fuel Tank 2016+|,|NA1J-42-110|,|565.02|,|462.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Fuel Tank 2016+
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||NH19-51-0L0E|,|20MAMIEXLI|,|MAZDA MX-5 MIATA OEM HALOGEN Headlamp, Headlight Assembly 2009-2012|,|NH19-51-0L0E|,|858.66|,|643.00|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Headlamp, Headlight Assembly 2009-2012
Manufacturer: Genuine Mazda Original Parts
NH19-51-0L0E - LEFT, HALOGEN, W/ RETRACT HARD TOP
NH18-51-0L0E - LEFT, HALOGEN, W/ O RETRACT HARD TOP
NH18-51-0K0F - RIGHT, HALOGEN, W/ O RETRACT HARD TOP
NH19-51-0K0G - RIGHT, HALOGEN, W/ RETRACT HARD TOP
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$643)"|-||-|"Select Your Top Style" "Select Here" "RETRACT HARD TOP" "No RETRACT HARD TOP"|-||-|"Special Protection & Handling" "add (+$15)"|-||-|||-||NE59-51-031B|,|NEW|,|MAZDA MX-5 MIATA OEM Headlamp, Headlight Assembly 2006-2008|,|NE59-51-031B|,|740.84|,|622.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM HID Headlamp, Headlight Assembly 2006-2008
OEM SKU:
Driver's side HID: NE59-51-041B
Passenger's side HID: NE59-51-031B
Driver's side HALOGEN: NE55-51-0L0B
Passenger's side HALOGEN: NE55-51-0K0B
|,|"Select Lamp Type" "Select Here" "HALOGEN" "HID add(+$265)"|-||-|"Select Side" "Select Here" "Driver's Side" "Passenger's Side"|-||-|"Special Protection & Handling Fee" "add (+$25)"|-||-|||-||NE51-61-A10|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM HEATER CORE 2006-2015|,|ne51-61-a10|,|276.98|,|225.99|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM HEATER CORE 2006-2015
Other Names: Core Heater Unit
Description: Miata mx5.
Notes: Included With Evaporator Assembly.
Manufacturer: Genuine Mazda Original Parts
|,|||-||NH21-51-031G|,|20MAMIEXLI|,|MAZDA MX-5 MIATA OEM HID Headlamp, Headlight Assembly 2009-2012|,|NH21-51-031G|,|950.32|,|792.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM HID Headlamp, Headlight Assembly 2009-2012
Manufacturer: Genuine Mazda Original Parts
NH21-51-041E - LEFT, HID, W/ RETRACT HARD TOP
NH20-51-041E - LEFT, HID, W/ O RETRACT HARD TOP
NH20-51-031F - RIGHT, HID, W/ O RETRACT HARD TOP
NH21-51-031G - RIGHT, HID, W/ RETRACT HARD TOP
|,|"Select Side" "Select Here" "Driver's Side" "Passenger's Side" "Both Side add(+$792.02)"|-||-|"Select Your Top Style" "Select Here" "RETRACT HARD TOP" "No RETRACT HARD TOP"|-||-|"Special Protection & Handling" "add (+$15)"|-||-|||-||N243-33-04X|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Hub Assembly Front Hub & Bearing 2016-2019+|,|N243-33-04X|,|278.95|,|229.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Hub Assembly Front Hub & Bearing 2016-2019+
#1 IN ILLUSTRATION
|,|||-||N243-26-15X|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Hub Assembly REAR Hub & Bearing 2016-2020+|,|N243-26-15X|,|259.45|,|206.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Hub Assembly REAR Hub & Bearing 2016-2020+
#3 IN ILLUSTRATION
|,|||-||NP32-45-510A|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM HYDRAULIC LINES 2009-2015|,|np32-45-510a|,|15.23|,|11.42|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM HYDRAULIC LINES 2009-2015
PRODUCT DETAILS
Other Names: Pipe Clutch
Description: Miata mx5. Master cyl to flex hose.
Manufacturer: Genuine Mazda Original Parts
|,|||-||NH44-41-360|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM HYDRAULIC LINES 2009-2015|,|nh44-41-360|,|15.45|,|11.58|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM HYDRAULIC HYDRAULIC LINES 2009-2015
PRODUCT DETAILS
Other Names: Pipe Clutch
Description: From 4/1/06. Miata mx5. Flex hose to slave cyl.
Manufacturer: Genuine Mazda Original Parts
|,|||-||F151-41-380B|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM HYDRAULIC SYSTEM FLEX HOSE 2006-2015|,|f151-41-380b|,|44.25|,|32.85|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM HYDRAULIC SYSTEM FLEX HOSE 2006-2015
PRODUCT DETAILS
Other Names: Hose Flexible
Description: From 4/1/06. Miata mx5
|,|||-||PEES-13-20Z|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Intake Connector 2016+|,|PEES-13-20Z|,|55.12|,|42.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Intake Connector 2016+
REFERENCE #12 IN ILLUSTRATION
|,|||-||OEM-LF9L-13-220A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM INTAKE DUCT 2009-2015|,|oem-lf9l-13-220a|,|103.54|,|86.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM INTAKE DUCT 2009-2015
PRODUCT DETAILS
#10 on the Diagram
Genuine Mazda Original Parts
|,|||-||P51N-13-200|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Intake Duct 2016+|,|P51N-13-200|,|32.55|,|26.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Intake Duct 2016+
REFERENCE #8 IN ILLUSTRATION
|,|||-||PEES-13-100--PE01-13-111|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Intake Manifold & Gasket 2016+|,|PEES-13-100|,|627.51|,|482.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Intake Manifold & Gasket 2016+
|,|||-||N243-33-020|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Knuckle 2016-2019+|,|N243-33-020|,|303.95|,|242.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Knuckle 2016-2019+
#2 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||N243-34-300C|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Lower Control Arm 2016-2019+|,|N243-34-300C|,|457.66|,|379.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Lower Control Arm 2016-2019+
#9 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||AUTOMATIC-TRANSMISSION-PART|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM MAINTENANCE & LUBRICATION/AUTOMATIC TRANSMISSION 2016+|,|automatic-transmission-part|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM MAINTENANCE & LUBRICATION/AUTOMATIC TRANSMISSION 2016+
Please Shop by the Number on the Diagram
|,|"1. Trans Pan AUTO TRANS - SJ12-19-830" "Select Here" "Yes add(+$115)"|-||-|"2. Trans Pan Plug AUTO TRANS, DRAIN - SJ01-19-253" "Select Here" "Yes add(+$13.02)"|-||-|"3. Plug AUTO TRANS, LEVEL CHECK - SJ01-19-232" "Select Here" "Yes add(+$14.02)"|-||-|"5. Trans Pan Plug Gasket - SJ01-19-253" "Select Here" "Yes add(+$14.02)"|-||-|"7. Filter - SJ01-21-500" "Select Here" "Yes add(+$59.02)"|-||-|||-||L321-13-215|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM MASS AIR FLOW SENSOR 2012-2015|,|l321-13-215|,|311.08|,|262.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM MASS AIR FLOW SENSOR 2012-2015
PRODUCT DETAILS
#26 on the Diagram
Other Names: Air Mass Sensor, Sensor Air Flow
|,|"AIR MASS SENSOR O-RING (ZL01-13-214)" "Select Here" "Yes add(+$9.75)"|-||-|||-||PE01-13-215|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Mass Air Flow Sensor 2016+|,|PE01-13-215|,|198.75|,|162.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Mass Air Flow Sensor 2016+
REFERENCE #20 IN ILLUSTRATION
|,|||-||MASTER-CYLINDER---COMPONENTS-ON-DASH-PANEL-PART|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM MASTER CYLINDER - COMPONENTS ON DASH PANEL 2006-2015|,|master-cylinder---components-on-dash-panel-part|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM MASTER CYLINDER - COMPONENTS ON DASH PANEL 2006-2015
Please shop by the numbers on the diagram.
|,|"1. Master Cylinder MANUAL TRANS; W/ STABILITY CONTROL with core charge - NE55-43-40ZA" "Select Here" "Yes add(+$278)"|-||-|"1. Master Cylinder AUTO TRANS; W/ STABILITY CONTROL with core charge - NF59-43-40ZA" "Select Here" "Yes add(+$248)"|-||-|"1. Master Cylinder AUTO TRANS; W/ O STABILITY CONTROL with core charge - NE61-43-40ZA" "Select Here" "Yes add(+$268)"|-||-|"1. Master Cylinder MANUAL TRANS; W/ O STABILITY CONTROL with core charge - NF47-43-40ZA" "Select Here" "Yes add(+$268)"|-||-|"2. Master Cylinder Reservoir AUTO TRANS - NE61-43-55ZB" "Select Here" "Yes add(+$44.02)"|-||-|"2. Master Cylinder Reservoir MANUAL TRANS - NG90-43-55Z" "Select Here" "Yes add(+$48.02)"|-||-|"3. Reservoir Cap - BN8F-43-55YC" "Select Here" "Yes add(+$9.95)"|-||-|"4. Brake Booster - NFY7-43-80ZA" "Select Here" "Yes add(+$134.05)"|-||-|"5. Fork - 1524-43-141" "Select Here" "Yes add(+$4.04)"|-||-|"6. Power Booster Gasket - H001-43-443" "Select Here" "Yes add(+$4.18)"|-||-|"7. Vacuum Hose - NF47-43-640C" "Select Here" "Yes add(+$44.02)"|-||-|"8. Vacuum Hose Clamp - 9928-31-500" "Select Here" "Yes add(+$3.68)"|-||-|||-||GRILLE---COMPONENTS-PART|,|20MIMIEXPA|,|MAZDA MX-5 MIATA OEM MESH TYPE GRILLE & COMPONENTS 2009-2012|,|NH19-50-1T1C|,|153.09|,|126.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM MESH TYPE GRILLE & COMPONENTS 2009-2012
#1 - Grille on the diagram
#2 - Grille Cap Left or Right
#3 - Grille Cover
|,|"Grill Cap, LEFT#2 - NH53-50-M42" "Select Here" "Yes add(+$9.80)"|-||-|"Grill Cap, RIGHT#2 - NH53-50-M32" "Select Here" "Yes add(+$9.80)"|-||-|"Grille Cover #3 - NH53-50-1T2A" "Select Here" "Yes add(+$175)"|-||-|||-||NE61-39-050F|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM MOTOR MOUNT 2006-2015|,|ne61-39-050f|,|93.74|,|82.55|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM MOTOR MOUNT 2006-2015
#1 on the Diagram
|,|"Select Option" "Select Here" "AUTO TRANS LEFT - NE61-39-050F" "AUTO TRANS RIGHT - NE61-39-040F" "MANUAL TRANS LEFT - NE55-39-050D" "MANUAL TRANS RIGHT - NE55-39-040D"|-||-|||-||NE55-39-021C|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM MOUNT BRACKET 2006-2015|,|ne55-39-021c|,|114.95|,|94.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM MOUNT BRACKET 2006-2015
#5 on the Diagram
|,|"Select Option" "Select Here" "Driver's Side - NE55-39-030A add(+$10)" "Passender's Side - NE55-39-021C"|-||-|"Mount Bracket Bolt" "Select Here" "Yes add(+$3.50)"|-||-|||-||LFN1-18-8G1A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM O2 OXYGEN SENSOR 2009-2015|,|LFN1-18-8G1A|,|553.39|,|432.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM O2 OXYGEN SENSOR 2009-2015
#13 on the Diagram
Positions: Front, Rear
Other Names: Rear Oxygen Sensor, Sensor Air Fuel Ratio
Description: Miata mx5. Front.
Manufacturer: Genuine Mazda Original Parts
Replaces: LFN1-18-8G1
|,|||-||LFE2-10-400D|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM OIL PAN 2006-2015|,|LFE2-10-400D|,|495.81|,|425.00|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM OIL PAN 2006-2015
Other Names: Pan Oil
Description: Miata mx5.
Applications: 2.0L.
#8 on the Diagram
Includes Drain Plug - LFE5-10-404, and Drain Plug Gasket - 9956-41-400
|,|||-||PEES-10-400|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Oil Pan 2016+|,|PEES-10-400|,|139.55|,|109.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Oil Pan 2016+
Reference #5 in Diagram.
|,|||-||L310-14-100|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM OIL PUMP 2009-2015|,|l310-14-100|,|323.97|,|269.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM OIL PUMP 2009-2015
PRODUCT DETAILS
Other Names: Fuel Pump, Pump Oil
Applications: 2.0L. 2.3L. 2.0L W/O SKYACTIV-G.
#13 LFE2-14-240A Oil Pump Pick-Up
#14 L309-14-248 Oil Tube Gasket
Manufacturer: Genuine Mazda Original Parts
|,|"Select Oil Pump Pick-Up & Gasket" "Select Here" "Yes add(+$55)"|-||-|||-||PARKING-BRAKE-PART|,||,|Mazda MX-5 Miata OEM PARKING BRAKE 2016+|,|parking-brake-part|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM PARKING BRAKE 2016+
Please shop by the numbers on the diagram
|,|"Rear Cable RIGHT - N243-44-410" "Select Here" "Yes add(+$34.05)"|-||-|"Rear Cable LEFT - N243-44-420B" "Select Here" "Yes add(+$37.05)"|-||-|"Front Cable - N243-44-150" "Select Here" "Yes add(+$12.95)"|-||-|"Parking Brake Control W/LEATHER - N244-44-010A" "Select Here" "Yes add(+$66.83)"|-||-|||-||L325-13-890A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM PCV VALVE 2008-2015|,|L325-13-890A|,|17.87|,|14.96|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM PCV VALVE 2008-2015
#5 IN ILLUSTRATION
|,|"PCV VALVE O-RING (L341-13-203)" "Select Here" "Yes add(+$5.95)"|-||-|"PCV HOSE (LF15-13-895)" "Select Here" "Yes add(+$15.02)"|-||-|||-||PRESSURE-HOSE|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM Pressure Hose 2006-2015|,|pressure-hose|,|172.06|,|98.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Pressure Hose 2006-2015
9. Pressure Hose LOW - NE51-61-4T0C
10. Pressure Hose HIGH - NE51-61-461C
|,|"Pressure Hose LOW" "Select Here" "Yes add(+$59)"|-||-|"Pressure Hose HIGH" "Select Here" "Yes"|-||-|||-||PE31-16-410|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM Pressure Plate 2016+|,|pe31-16-410|,|191.80|,|143.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Pressure Plate 2016+
Other Names: Clutch Cover
Manufacturer: Genuine Mazda Original Parts
NOTE: Picture shown is for illustration purpose only. Actual product may vary.
|,|"Select Year" "Select Here" "2016-2019 add(+$15)" "2020-2022"|-||-|||-||RADIATOR-ASSEMBLY|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM RADIATOR & COOLING FAN 2006-2015|,|radiator-assembly|,|0.01|,|0.01|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM RADIATOR & COMPONENTS 2006-2015
Please Shop by the numbers on the diagram.
|,|"1. Radiator Assembly MANUAL TRANS - LFG2-15-200E" "Select Here" "Yes add(+$298)"|-||-|"1. Radiator Assembly AUTO TRANS - LFG1-15-200E" "Select Here" "Yes add(+$289)"|-||-|"4. Thermostat Housing FROM 9/ 1/ 06 - LF70-15-170" "Select Here" "Yes add(+$62.02)"|-||-|"5. Water Outlet - LFE2-15-17Z" "Select Here" "Yes add(+$72.02)"|-||-|"6. Reservoir Assembly - LFG1-15-350C" "Select Here" "Yes add(+$72.02)"|-||-|"7. Reservoir Cap - AJA4-15-205" "Select Here" "Yes add(+$22.02)"|-||-|"10. Fan Assembly - LFG1-15-025F" "Select Here" "Yes add(+$315)"|-||-|"11. Fan Shroud - LFG1-15-210E" "Select Here" "Yes add(+$95.05)"|-||-|"12. Fan Blade - LFG1-15-140" "Select Here" "Yes add(+$52.02)"|-||-|"13. Fan Motor - LFG1-15-150A" "Select Here" "Yes add(+$187.02)"|-||-|||-||BRAKE-PARTS-II|,||,|Mazda MX-5 Miata OEM REAR BRAKE PARTS 2016+|,|brake-parts-ii|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM BRAKE PARTS II 2016+
Please shop by the numbers on the diagram
|,|"1. Rotor - N251-26-251" "Select Here" "Yes add(+$72.05)"|-||-|"2. Axle Nut - D651-33-042A" "Select Here" "Yes add(+$6.25)"|-||-|"3. Hub Assembly - N243-26-15X" "Select Here" "Yes add(+$178.85)"|-||-|"4. Wheel Stud - D10A-33-062" "Select Here" "Yes add(+$3.04)"|-||-|"5. Splash Shield - N243-26-261" "Select Here" "Yes add(+$9.40)"|-||-|"6. Caliper Assembly, RIGHT W/O BREMBO BRAKES - NAYJ-26-98ZB" "Select Here" "Yes add(+$355.95)"|-||-|"6. Caliper Assembly, LEFT W/O BREMBO BRAKES - NAYJ-26-99ZB" "Select Here" "Yes add(+$235.95)"|-||-|"6. Caliper Assembly, LEFT W/BREMBO BRAKES - NAYF-26-99ZB" "Select Here" "Yes add(+$399.95)"|-||-|"6. Caliper Assembly, RIGHT W/BREMBO BRAKES - NAYF-26-98ZB" "Select Here" "Yes add(+$399.95)"|-||-|"10. Brake Pads Mount Kit - N2Y3-26-48ZA" "Select Here" "Yes add(+$85.95)"|-||-|"12. ABS Sensor, LEFT - N243-43-72YB" "Select Here" "Yes add(+$98.95)"|-||-|"12. ABS Sensor, RIGHT - N243-43-71YB" "Select Here" "Yes add(+$85.78)"|-||-|"13. Brake Hose - N243-43-810" "Select Here" "Yes add(+$12.10)"|-||-|||-||N243-26-11XB|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM REAR Knuckle Assembly 2016-2022 |,|N243-26-11XB-12XB|,|576.56|,|469.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM REAR Knuckle Assembly 2016-2022
|,|"Select Side" "Select Here" "Driver Side (N243-26-12XB)" "Passenger Side (N243-26-11XB)" "Both Side add(+$469.02)"|-||-|||-||BP6G-18-861C-9U|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata OEM REAR O2 OXYGEN SENSOR 2001-2005|,|BP6G-18-861C-9U|,|283.77|,|232.05|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM REAR O2 OXYGEN SENSOR 2001-2005
Positions: Rear, Without turbo
|,|||-||LFG2-18-861B-9U|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM Rear O2 OXYGEN SENSOR 2006-2015|,|LFG2-18-861B-9U|,|278.18|,|229.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Rear O2 OXYGEN SENSOR 2006-2015
#12 on the Diagram
Positions: Rear
Other Names: Ft Oxygen Sensor
Description: Miata mx5. Rear.
Replaces: LFG2-18-861, LFG2-18-861A-9U, LFG2-18-861A, LFG2-18-861B
Manufacturer: Genuine Mazda Original Parts
|,|||-||N251-26-251|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM REAR Rotor 2016+|,|N251-26-251|,|99.95|,|86.02|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM REAR Rotor 2016+
Manufacturer: Genuine Mazda Original Parts
|,|||-||STABILIZER-BAR---COMPONENTS-PART1|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Mazda MX-5 Miata OEM REAR Stabilizer Bar 2016-2019+|,|N243-28-15X|,|113.14|,|92.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM REAR Stabilizer Bar 2016-2019+
#1 IN ILLUSTRATION
|,|"Stabilizer Bar Bracket (#3)" "Select Here" "Yes add(+$5.15)"|-||-|"Stabilizer Link Right (#5)" "Select Here" "Yes add(+$39.95)"|-||-|"Stabilizer Link Left (#5)" "Select Here" "Yes add(+$24.05)"|-||-|||-||REAR-SUSPENSION-PART|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Mazda MX-5 Miata OEM REAR SUSPENSION PARTS 2016-2019+|,|rear-suspension-part|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM REAR SUSPENSION PARTS 2016-2019+
SHOP by the number on the diagram
|,|"1. Strut MANUAL TRANS; W/O RETRACTABLE HARD TOP - NA8W-28-70XB" "Select Here" "Yes add(+$230.02)"|-||-|"1. Strut AUTO TRANS; W/RETRACTABLE HARD TOP - NC9H-28-70XB" "Select Here" "Yes add(+$125.02)"|-||-|"1. Strut AUTO TRANS; W/O RETRACTABLE HARD TOP - NA1J-28-70XA" "Select Here" "Yes add(+$125.02)"|-||-|"2. Coil Spring AUTO TRANS; W/O RETRACTABLE HARD TOP - NC2W-28-011" "Select Here" "Yes add(+$109.02)"|-||-|"2. Coil Spring MANUAL TRANS; W/RETRACTABLE HARD TOP - NC9J-28-011" "Select Here" "Yes add(+$62.02)"|-||-|"2. Coil Spring AUTO TRANS; W/RETRACTABLE HARD TOP - NA5J-28-011" "Select Here" "Yes add(+$62.02)"|-||-|"3. Spring Seat Dust Shield - N243-28-012B" "Select Here" "Yes add(+$20.02)"|-||-|"4. Strut Bumper W/RETRACTABLE ROOF - NC9J-28-1A1" "Select Here" "Yes add(+$21.02)"|-||-|"4. Strut Bumper W/O RETRACTABLE ROOF - N243-28-1A1" "Select Here" "Yes add(+$22.02)"|-||-|"5. Mount Plate - N243-28-340A" "Select Here" "Yes add(+$102.02)"|-||-|"7. Hub Assembly - N243-26-15X" "Select Here" "Yes add(+$205.02)"|-||-|"8. Ft Lateral Arm RIGHT - N243-28-500" "Select Here" "Yes add(+$85.02)"|-||-|"8. Ft Lateral Arm LEFT - N243-28-550" "Select Here" "Yes add(+$85.02)"|-||-|"9. Link Rod Lower Link - N243-28-45X" "Select Here" "Yes add(+$85.02)"|-||-|"10. Trailing Arm - N243-28-200" "Select Here" "Yes add(+$45.02)"|-||-|"11. Link LOWER; W/RETRACTABLE ROOF - NA2E-28-61X" "Select Here" "Yes add(+$49.02)"|-||-|"11. Link Arm LOWER; W/O RETRACTABLE ROOF - N243-28-61X" "Select Here" "Yes add(+$49.02)"|-||-|"11. Rear Lateral Arm UPPER - N243-28-20X" "Select Here" "Yes add(+$59.02)"|-||-|"12. Stabilizer Bar - N243-28-15X" "Select Here" "Yes add(+$96.02)"|-||-|"14. Stabilizer Bar Bracket - N243-28-155" "Select Here" "Yes add(+$5.02)"|-||-|"15. Stabilizer Link RIGHT - N243-28-170" "Select Here" "Yes add(+$42.02)"|-||-|"15. Stabilizer Link LEFT - N243-28-190" "Select Here" "Yes add(+$39.02)"|-||-|"16. Cross-Member - N243-28-800C" "Select Here" "Yes add(+$692.02)"|-||-|||-||AXLE---DIFFERENTIAL-PART|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Mazda MX-5 Miata OEM REAR SUSPENSION/AXLE & DIFFERENTIAL 2016+|,|MA53-27-100C|,|0.01|,|0.01|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM REAR SUSPENSION/AXLE & DIFFERENTIAL 2016+
Please shop by the number on the diagram
|,|"Differential Assembly (#1)" "Select Here" "AUTO TRANS (MA53-27-100C) add(+$1105.95)" "MANUAL TRANS (MS14-27-100H) add(+$1395.95)"|-||-|"Axle Assembly - Manual (#2)" "Select Here" "Driver Side add(+$545.30)" "Passenger Side add(+$545.30)"|-||-|"Inner Joint Assembly (#4)" "Select Here" "Yes add(+$285.05)"|-||-|"Boot Kit (#6)" "Select Here" "INNER - RTC3-22-540 add(+$45.95)" "OUTER - RTC3-22-530 Yes add(+$79.05)"|-||-|"Drive Shaft Assembly (#7)" "Select Here" "AUTO TRANS - PA48-25-100 Yes add(+$425.95)" "MANUAL TRANS - PA47-25-100 Yes add(+$429.95)"|-||-|||-||LF9J-15-909A-9U|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM SERPENTINE BELT 2009-2015|,|lf9j-15-909a-9u|,|76.45|,|52.85|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM SERPENTINE BELT 2009-2015
PRODUCT DETAILS
Other Names: Belt V
Description: Miata mx5.
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "5. SERPENTINE BELT with A/C"
"5. SERPENTINE BELT Without A/C (LF9M-15-909A) add(+$3.20)"|-||-|||-||FB01-49-460|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM SLAVE CYLINDER REPAIR KIT 2007-2015|,|OEM-FB01-49-460|,|27.28|,|20.45|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM SLAVE CYLINDER REPAIR KIT 2007-2015
Other Names: Master Cylinder Repair Kit, Inner Parts Kit
|,|||-||FRONT-SUSPENSION-PART|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Mazda MX-5 Miata OEM Spring Insulator & Bumper 2016-2019+|,|N243-34-012|,|37.25|,|29.95|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Spring Insulator 2016-2019+
#5, #6 IN ILLUSTRATION
|,|||-||NA1J-34-15X|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Stabilizer Bar 2016-2019+|,|NA1J-34-15X|,|141.97|,|112.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Stabilizer Bar 2016-2019+
#1 IN ILLUSTRATION
|,|"Do You Want Stabilizer Bar Bracket? " "Select Here" "Yes add(+$5.50)"|-||-|||-||N243-34-150|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Stabilizer Link 2016-2019+|,|N243-34-150|,|29.87|,|23.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Stabilizer Link 2016-2019+
#11 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Passenger Side" "Driver Side add(+$18)"|-||-|||-||MAZDA-MX-5-MIATA-OEM-STYLE-CARBON-FIBER-HOOD-2016|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Mazda MX-5 Miata OEM Style Carbon Fiber Hood 2016+|,|CM-HD2-ND-XX|,|1,099.99|,|754.00|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Style Carbon Fiber Hood 2016+
This hood replaces the OEM aluminium hood on all Mazda Miata ND. Made with high quality carbon fiber, the CFRP (carbon fiber outer layer with fiberglass structure) hood weighs around 9 KG (19.5 Pounds) which is around the same weight as the OEM one. The structure is made with fiberglass for maximum strength.
If you are serious about saving weight, the full carbon fiber hood is for you: it weighs only 6 kg!
Specs: 3K weaving. CF + UV resistant varnish, gloss clear coat paint (made using vacuum bag process)
Easy to install: perfect fitment using factory mounts. You can reuse the 4 OEM screws and the front latch.
*Availability: 10 Weeks production time
|,|"Select Material" "Select Here" "Carbon Fiber With Fiberglass Structure" "FULL Carbon Fiber add(+$815)"|-||-|"Shipping Cost" "add(+$499)"|-||-|||-||MAZDA-MX-5-MIATA-OEM-STYLE-HOOD-2016|,|MIATA-OEM-EXTERIOR-PARTS-2016-|,|Mazda MX-5 Miata OEM Style Fiberglass Hood 2016+|,|CM-HD2-ND-F|,|799.99|,|550.00|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Style Fiberglass Hood 2016+
This OEM Style hood replaces the OEM aluminium hood on all Mazda Miata ND. Made with high quality Fiberglass. The structure is made with fiberglass for maximum strength.
Easy to install: perfect fitment using factory mounts. You can reuse the 4 OEM screws and the front latch.
*Availability: 10 Weeks production time
|,|"Shipping Cost" "add(+$499)"|-||-|||-||LF17-15-980E|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM TENSIONER 2006-2015|,|lf17-15-980e|,|187.76|,|142.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM TENSIONER 2006-2015
PRODUCT DETAILS
Other Names: Tensioner
Description: Miata mx5.
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "3. Manual Trans" "3. Auto Trans (LFN3-15-980A) add(+$55)"|-||-|||-||PE03-15-980B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Tensioner 2016+|,|PE03-15-980B|,|182.95|,|145.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Tensioner 2016+
REFERENCE #1 IN ILLUSTRATION
|,|||-||9YA0-2A-818|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Tensioner Bolt & Nut 2016+|,|9YA0-2A-818|,|9.95|,|7.95|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Tensioner Bolt & Nut 2016+
#2 & #3 in Diagram
|,|||-||LFE2-10-500B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM TIMING COVER 2010-2015|,|lfe2-10-500b|,|180.72|,|152.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM TIMING COVER 2010-2015
PRODUCT DETAILS
Positions: Front
Other Names: Front Cover, Cover Timing Chain
Description: Miata mx5.
Applications: 2.0L.
Manufacturer: Genuine Mazda Original Parts
|,|"Timing Cover Front Seal (L3G6-10-602)" "Select Here" "Yes add(+$10.02)"|-||-|||-||PEES-10-500|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Timing Cover 2016+|,|PEES-10-500|,|211.55|,|169.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Timing Cover 2016+
|,|||-||NF53-56-E00B|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM TRANS CROSS-MEMBER 2006-2015|,|nf53-56-e00b|,|168.74|,|138.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM TRANS CROSS-MEMBER 2006-2015
#13 on the Diagram
Other Names: Member Cross
Description: Manual trans.
|,|"Mount Bracket Bolt - 9946-30-820" "Select Here" "Yes add(+$2.50)"|-||-|||-||NF79-56-930C|,|20MIMIEXPA|,|Mazda MX-5 Miata OEM Trunk Lift Cylinder 2006-2015|,|nf79-56-930c|,|40.45|,|29.85|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Trunk Lift Cylinder Without retractable hard top 2006-2015
PRODUCT DETAILS
#13 on the Diagram.
Positions: Left, Right
Other Names: Strut, Damper Stay-Trunk Lid
Description: Miata mx5. Without retractable hard top.
Manufacturer: Genuine Mazda Original Parts
|,|"Select Option" "Select Here" "W/ O RETRACTABLE HARD TOP" "W/ RETRACTABLE HARD TOP - NE52-56-930 add(+$4.00)"|-||-|||-||N243-56-930A|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Trunk Lift Cylinder 2016+|,|N243-56-930A|,|28.78|,|24.77|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Trunk Lift Cylinder 2016+
Fits 2016 and Up Miata MX5 without retractable hard top.
Manufacturer: Genuine Mazda Original Parts
|,|||-||NA1J-56-820|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA OEM Trunk Lock 2016+|,|NA1J-56-820|,|84.95|,|74.85|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM Trunk Lock 2016+
Fit 2016 and Up MX-5 Without hard top.
Manufacturer: Genuine Mazda Original Part
|,|||-||SUSPENSION-MOUNTING-PART|,|MIATA-OEM-ALL-OTHER-PARTS-2016-|,|Mazda MX-5 Miata OEM Under Cover 2016-2019+|,|N247-34-H80B|,|65.60|,|56.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Under Cover 2016-2022+
#10 IN ILLUSTRATION
|,|||-||N243-34-200|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Upper Control Arm 2016-2019+|,|N243-34-200|,|398.53|,|319.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Upper Control Arm 2016-2019+
#8 IN ILLUSTRATION
|,|"Select Side" "Select Here" "Driver Side" "Passenger Side"|-||-|||-||N243-34-340|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Upper Mount Strut Mount 2016-2019+|,|N243-34-340|,|19.55|,|17.95|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Upper Mount Strut Mount 2016-2019+
#7 IN ILLUSTRATION
|,|||-||PEES-10-210D--PEES-10-235|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Valve Cover & Valve Cover Gasket 2016+|,|PEES-10-210D-PEES-10-235|,|379.95|,|289.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Valve Cover & Valve Cover Gasket 2016+
Reference #9 in Diagram
|,|||-||LFE2-10-210C|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM VALVE COVER With Gasket 2006-2019|,|LFE2-10-210C|,|445.20|,|362.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM VALVE COVER 2006-2019
|,|"Select Year" "Select Here" "2006-2015" "2016-2019+"|-||-|||-||L3P5-13-970|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata OEM VAPOR CANISTER 2006-2015|,|l3p5-13-970|,|179.66|,|143.55|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM VAPOR CANISTER 2006-2015
#10 on the Diagram
|,|||-||WATER-PUMP-PART|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA MX-5 MIATA OEM WATER PUMP 2011-2015|,|water-pump-part|,|0.01|,|0.01|,||,||,||,||,||,||,|MAZDA MX-5 MIATA OEM WATER PUMP 2011-2015
Please shop by the numbers on the diagram
|,|"1. Water Pump - LF94-15-100A" "Select Here" "Yes add(+$121)"|-||-|"2. Water Pump Assembly Gasket - LF01-15-116A" "Select Here" "Yes add(+$4.15)"|-||-|"4. Pulley - L327-15-131" "Select Here" "Yes add(+$13.02)"|-||-|||-||PEES-15-908|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OEM Water Pump Belt 2016+|,|PEES-15-908|,|31.19|,|26.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM Water Pump Belt 2016+
REFERENCE #4 IN ILLUSTRATION
|,|||-||MAZDAOEMWHEELS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|Mazda MX-5 Miata OEM Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-OEM-WHEELS-2006-2015|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2006-2012|,|Mazda MX-5 Miata OEM Wheels 2006-2015|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-OEM-WHEELS-2016-|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Mazda MX-5 Miata OEM Wheels 2016+|,||,||,||,||,||,||,||,||,||,||,|||-||NE52-67-321A|,|20MIMIEXPA|,|Mazda MX-5 Miata OEM WIPER ARM 2006-2015|,|ne52-67-321a|,|67.71|,|55.02|,||,||,||,||,||,||,|Mazda MX-5 Miata OEM WIPER ARM 2006-2015
#1 - WIPER ARM
#3 - Wiper Arm Cover
Other Names: Arm Wiper
Manufacturer: Genuine Mazda Original Parts
|,|"Select Side" "Select Here" "Wiper Arm, RIGHT" "Wiper Arm, LEFT - NE51-67-321" "Both Side add(+$55.02)"|-||-|"Wiper Arm Cover - D350-67-395" "Select Here" "Yes add(+$4.25)"|-||-|||-||OPENFLASH-CENTER-EXIT-EXHAUST-W-DIFFUSER|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata OpenFlash Center Exit Exhaust with Diffuser 2016-2020|,|61-2113|,|1,215.85|,|999.85|,||,||,||,||,||,||,|Mazda MX-5 Miata OpenFlash Center Exit Exhaust with Diffuser 2016-2020
Mazda MX-5 ND Center Exit Exhaust with Diffuser
At last An affordable high quality center-exit exhaust system for your ND! Coupled with a center-exit diffuser (included), this upgrade will dramatically improve the look of your car while providing a sporty, deep exhaust note. The large proprietary muffler eliminates drone and other fatiguing sound artifacts.
Fits 2016-and-up (ND) Mazda MX5.
Features:
Sporty sound with no drone
Polished 304SS dual tips (3 inch)
Polished 304SS (stainless steel) mandrel bent tubing (2.25 inch)
1/2 inch think steel flanges
Connects to the factory (or any factory replacement) mid-pipe
One Year Warranty
Sean's Application Notes:
This is a great muffler choice for those wanting to keep things quiet. The muffler on it's own without a header or midpipe is VERY mellow with a deep tone. This will also help keep your exhaust quiet should you want to swap out the factory header for our RoadsterSport unit.
*** Product images may differ from actual product appearance ***
|,|"Shipping Cost" "add(+$159)"|-||-|||-||MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES|,||,|MAZDA MX-5 MIATA PERFORMANCE PARTS AND ACCESSORIES|,||,||,||,|MAZDA MX-5 MIATA PERFORMANCE PARTS AND ACCESSORIES|,||,||,||,||,||,|
|,|||-||MAZDA-MX-5-MIATA-PROACT-ULTRA-PREMIUM-CERAMIC-BRAKE-PADS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata ProAct Ultra Premium Ceramic Brake Pads - Front Set 2006-2010|,|ACT1179|,|126.20|,|79.99|,||,||,||,||,||,||,|Mazda MX-5 Miata ProAct Ultra Premium Ceramic Brake Pads - Front Set 2006-2010
Akebono Ceramic Technology (ACT) helps to reduce the brake noise (squealing and grinding), vibration and harshness (NVH) problems associated with some aftermarket brake products. Ceramic technology also produces ultra-low dusting for cleaner wheels and tires and fosters minimal wear on the brake rotor.
Other advantages of ProACT ceramic brake pads include:
* Unrivaled "initial effectiveness" with no required break-in period
* Ultra-quiet, positive and smooth braking performance
* High resistance to fade with fast recovery
* More consistent pedal feel for driver confidence
NVH control is further optimized by the fact that ProACT Ceramic Disc Pads are designed for specific models, as well as powder-coat finished and harmonically damped.
All Akebono ceramic disc pad formulations are also asbestos-free.
|,|||-||MAZDA-MX-5-MIATA-PROACT-ULTRA-PREMIUM-CERAMIC-BRAKE-PADS---REAR-SET-2006-2010|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata ProAct Ultra Premium Ceramic Brake Pads - Rear Set 2006-2010|,|ACT1180|,|110.65|,|69.99|,||,||,||,||,||,||,|Mazda MX-5 Miata ProAct Ultra Premium Ceramic Brake Pads - Rear Set 2006-2010
Akebono Ceramic Technology (ACT) helps to reduce the brake noise (squealing and grinding), vibration and harshness (NVH) problems associated with some aftermarket brake products. Ceramic technology also produces ultra-low dusting for cleaner wheels and tires and fosters minimal wear on the brake rotor.
Other advantages of ProACT ceramic brake pads include:
* Unrivaled "initial effectiveness" with no required break-in period
* Ultra-quiet, positive and smooth braking performance
* High resistance to fade with fast recovery
* More consistent pedal feel for driver confidence
NVH control is further optimized by the fact that ProACT Ceramic Disc Pads are designed for specific models, as well as powder-coat finished and harmonically damped.
All Akebono ceramic disc pad formulations are also asbestos-free.
|,|||-||RALLYBACKER-REAR-FENDER-FLARES|,|20MIMIEXPA|,|Mazda MX-5 Miata Rallybacker Rear Fender Flares 2006-2014|,|rallybacker-rear-fender-flares|,|610.99|,|549.90|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Rallybacker Rear Fender Flares
The Rally Backer Rear Fender Flares for NC (2006-2014) Miata will give an extra 30mm clearance on both sides of the vehicle to run bigger tires and/or wider + lower offset wheels. It’s a very unique look that will sure improve the look of NC running wide wheels.
• Great look
• Requires cutting and drilling into the fenders
• Made of FRP
• Only available for NC (2006-2014) Miata
|,|"Select Year" "Select Here" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-14)"|-||-|"Shipping Cost" "add(+$85)"|-||-|||-||BMXMIREDPAON|,|MIGIMOVIALL|,|Mazda MX-5 Miata Red Parking Only Sign 1990-1997|,|AU-MK1-RED|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Red Parking Only Sign 1990-1997
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|||-||MAMXMIREDPAO|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX-5 Miata Red Parking Only Sign 1999-2005|,|AU-MK2-RED|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Red Parking Only Sign 1999-2005
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|||-||MAMXMIREDPAO1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Red Parking Only Sign 2006-2015|,|AU-MK3-RED|,|24.99|,|20.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Red Parking Only Sign 2006-2008
MX-5 Miata territory must be posted! Hang these signs at your garage, home or at the office, wherever you park your Miata.
These Miata Parking Only Signs are available in all years and most colors.
Parking Only Signs – 9” x 12” .032 Gauge Aluminum
|,|"Select Year" "Select Here" "2006-2008" "2013-2015"|-||-|||-||MAZDA-MX-5-MIATA-REPLACEMENT-BATTERY-1999-2005|,|MAZDA-MX-5-MIATA-BATTERY-1999-2005|,|Mazda MX-5 Miata Replacement Battery Tray 1999-2005|,|902-868|,|49.99|,|38.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Replacement Battery Tray 1999-2005
Fits and looks exactly like the factory part.
|,|||-||REPLACEMENT-ROADSTERSPORT-GASKET---HEADER-TO-MIDPIPE|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Replacement RoadsterSport gasket - Header to Midpipe 2016-2019|,|21-1007b|,|16.99|,|14.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Replacement RoadsterSport gasket - Header to Midpipe 2016-2019
Replacement gasket that is included with our ND RoadsterSport Max Power standard-length header for connection from header to RoadsterSport midpipe.
NOTE: Does not work with the factory header.
*** Product images may differ from actual product appearance ***
|,|||-||REPLACEMENT-ROADSTERSPORT-GASKET---MIDPIPE-TO-MUFFLER|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Replacement RoadsterSport gasket - Midpipe to Muffler 2016-2019|,|61-1971|,|16.99|,|14.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Replacement RoadsterSport gasket - Midpipe to Muffler 2016-2019
Replacement gasket that is included with our ND RoadsterSport Midpipe for connection from midpipe to our RoadsterSport mufflers.
*** Product images may differ from actual product appearance ***
|,|||-||MAZDA-MX-5-MIATA-WINDSHIELD-COWL-GRILLE-1990-2005-REPLACES-OEM-PART-NA01-50-790E|,|NBBODYSTYLING|,|Mazda MX-5 Miata Replacement Wiper Cowl 1990-2005 - Replaces OEM Part - NA01-50-790E|,|909-865|,|249.95|,|178.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Windshield Cowl Grille 1990-2005 - Replaces OEM Part - NA01-50-790E
Go Miata is pleased to bring to the market the first affordable, windshield cowl grille for the 1990-2005 Mazda Miata MX-5. Made from ultra-durable ABS plastic, this OEM quality cowl readily replaces your Miataʼs broken, cracked, or just age brittle panel. When compared to the stock finish panel, our panel demonstrates to have enhanced durability and sturdiness. The installation is quick and easy with all new supplied hardware. Feel free to contact your Miata specialists at Go Miata with any questions or on how to order.
Replaces OEM part: NA01-50-790E
|,|||-||MAZDA-MX-5-MIATA-RETRO-LUGGAGE-RACK-1990-2015|,|19MAMIEXLURA|,|Mazda MX-5 Miata Retro Luggage Rack 1990-2015|,|244-010|,|369.99|,|299.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Retro Luggage Rack 1990-2015
Add a truly classic look to your Miata with this Retro style luggage rack. It’s a lower profile to our other racks.
Must be permanently attached to your trunk lid. Some assembly required.
Note:
Dimensions: 32'' wide by 16'' deep
Application:
1990-2015 With Out Satellite Antenna on trunk.
Not compatible with spoilers.
|,|"Oversize Fee" "add(+$15.00)"|-||-|||-||1TR3CDMZ001|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|MAZDA MX-5 MIATA REVEL Touring Sport Damper Coilover 1990-2019|,|1TR3CDMZ001|,|1,669.00|,|1,350.00|,||,||,||,||,||,||,|MAZDA MX-5 MIATA REVEL Touring Sport Damper Coilover 1990-2019
The Touring Sports Damper offers you a sporty yet compliant ride that will enhance your driving experience to new heights. A full case length threaded monotube damper give you greater ride height range and 32 levels of dampening adjustment allows for fine tuning of the ride characteristics. Pillowball upper mounts are included when available as well as Teflon thrust washers to reduce spring binding during suspension movement.
Front: Aluminum Upper Mount (With Rubber Bushing)
Rear: Aluminum Upper Mount (With Rubber Bushing)
|,|"Select Year" "Select Here" "1990-1997" "1999-2005" "2016-2019 (1TR3CDMZ002)"|-||-|"Shipping and Handling fee" "add(+$95)"|-||-|||-||MAMXMIRO|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Roadster|,|100-105|,|154.95|,|109.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Roadster
The fascinating development story of the worlds favorite roadster written by the actual people who brought the car to life, the cars engineers and designers. A unique, behind the scenes look at how the MX-5 Miata was born. Over 400,000 first generation cars were sold. The book follows the progress of the model from original concept through to 1998.
Hardcover - 10" x 8 " - 176 pp - 240 color, 20 b/w
|,|||-||MIROLOSIPL2|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Roadster Logo Sill Plates (2006-2015)|,|MS-971-470|,|79.99|,|59.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Roadster Logo Sill Plates
Dress up your factory plastic door sills with our stainless steel insert.
Engraved Roadster logo adds an air of exclusivity to your Miata.
For MX-5 Miata Years: 2006 - 2015
|,|||-||MAZDA-MX-5-MIATA-ROADSTERSPORT-SUPER-STREET-2016|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata RoadsterSport SUPER STREET 2016-2020|,|61-1787|,|845.99|,|598.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata RoadsterSport SUPER STREET 2016-2020
Stainless Steel PREMIUM ADJUSTABLE MX5 Miata Exhaust
Helmholtz Chamber Design Means All the FUN, without the DRONE
Under 14 pounds!
WHY: Because You want to have fun!
HOW: Helmholtz Technology in a Miata Muffler for the First Time!
WHAT: A 2016+ Miata Muffler that you can control, throaty burble fun when you want it with wide open the throttle, and super mild when you want to just cruise.
This is a heavily modified version of our all helmholtz Race muffler that adds an ultra efficient high density resonator before the tip to lower the volume significantly while keeping the fun burble and playful character of our Race muffler. We also dress it up with a unique ultra light version of our 3.5 inch RoadsterSport rolled tip pictured below to finish the look for our street customers wanting something more luxuriously finished than the aggressively lightweight Race muffler:
Result is a 13.9 pound wonder of a street muffler, you get the great look of the RoadsterSport 3.5 rolled tip, the clean flow of 2.5 inches of pipe from start to finish with smooth mandrel bends on the shortest possible path from the midpipe to the exhaust cutout to max your horsepower gains...and minimal weight with these features.
How did we do it? We outfitted our 2016 with a computer and sound analyzer and microphones and drove it under varying conditions and loads with and without muffler. We then use that data and some special software to calculate the particulars of the Helmholtz chamber to precisely knock down the frequencies we do not want to hear in the car while allowing the good throaty burble fun sounds to pass through. In brief, FUN when you want it, and super mild when just cruising. All this in a muffler under 14 pounds, a nice savings over the 20.5 pound factory muffler.
SHIPPING NOTE...ships factory direct to you. All POLISHED stainless steel construction. Uses stock hangers and connects to either our RoadsterSport midpipe or the stock midpipe.
The SOUND level is Adjustable by YOU, includes removeable cone baffle insert in the tip that helps YOU select final sound level, baffle in for reduced sound level, and baffle out for more sound...and just one bolt under the tip to make the easy change. Optional packed baffle cuts the sound even more if you want...but most won't!
Proudly made in the USA...with a LIFETIME WARRANY!
APPLICATION NOTES:
Mild when cruising on otherwise stock ND, delivering a classic sports car BARK and THROATY RUMBLE when you wind it out to redline, lots of fun burble when just playing with the throttle around town. Result is TONS of fun, will make many of you laugh out loud. You also get the best performance from the straightest and cleanest flow out the exhaust cutout you can get, and much lower weight. Nonetheless, this choice is NOT for the faint of heart!!! The most common question we will get on this one is: "will it be too loud" and we cannot answer that one for you because the "right" sound level is a matter of entirely subjective personal preference. However, if our RoadsterSport SuperQ is 10 to 15% more sound than stock (depending on use of removable baffle), and our ND RACE is a full 50 to 55% more sound than stock when on throttle, and this ND STREET is the middle choice at about 35% over stock sound level when on throttle hard, though perhaps just 15% over stock when cruising home in high gear and low rpms.
INSTALL NOTES:
Installation of this Miata exhaust is SUPER EASY...just two 14mm bolts to loosen! When you open the big box you will find separate foam wrap on the exhaust tip, leave that foam around the tip during your install to protect the polished tips and your car's soft plastic in the exhaust cutout. Use gloves. Note the 'bolts' from the factory are actually studs with springs and nuts and the factory usually jams the nuts on so hard that unbolting it will bring the stud out too. If that does not happen then use 13mm long socket to unscrew the studs (or use jam nut technique where both nuts are put on one stud against each other and then wrench used on the inner of the two to back out the stud). Then lube up the stock exhaust hangers with dish soap and yank stock muffler back and forth to work the soap into the rubber hangers and then the muffler will slide off those rubber hangers easily. Then hang the new muffler on the wet and soapy rubber hangers and torque 'bolts' with the springs back in place to 30ft/lbs. Now you can remove foam tip wrap. Option to remove the baffle too, to do so loosen bolt that holds it from under the exhaust tip and use it as handle to shake the baffle loose and then unscrew bolt the rest of the way and pull the baffle (pulling baffle raises the sound slightly). Note the muffler to midpipe joint is a ball socket connection for the first time on a Miata, it is designed to move a lot, so please do not add sealants that will gum up that dry ball socket joint.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MAZDA-MX-5-RS-R-SPORTS-I-COILOVERS-2016-|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata RS-R Sports I Coilovers 2016+|,|XSPIM032M|,|2,499.99|,|1,998.00|,||,||,||,||,||,||,|Mazda MX-5 Miata RS-R Sports I Coilovers 2016+
Spirited weekend track drives do not have to sacrifice daily driving comfort or performance. Designed for the performance enthusiast in mind, the RS-R Sports-I coilover system provides a comfortable ride for everyday use, yet is sufficient enough for those effervescent track days.
Compatibility: 2016+ Mazda MX-5
Chassis code: ND
Preset Approximate Height From RS-R:
Front -25mm to -30mm (-1.0in to -1.2in)
Rear -20mm to -25mm (-0.8in to -1.0in)
Maximum Adjustment Ranges:
Front +10mm to -95mm (+0.4in to -3.8in)
Rear +5mm to -110mm (+0.2in to -4.3in)
Recommended Adjustments for Optimal Ride-ability:
Front -5mm to -55mm (-0.2in to -2.2in)
Rear -5mm to -45mm (-0.2in to -1.8in)
Spring Rates:
Front 6.0kg/mm
Rear 3.0kg/mm
Quality and Detail
The RS-R coilovers are all Monotube hand assembled systems specifically designed to improve ride quality, performance, and comfort. Utilizing components such as; laser cut upper mounts, hand welded lower brackets, vehicle specific valving, are all assembled by hand to ensure quality and detail.
Urethane Bushing Technology
Utilizing Urethane bushing instead of bearing to reduce excessive vibrations from every day driving, as well as minimizing noises from suspension movements.
The Silent Roller Bearings
On MacPherson type suspension, as the suspension rotates along with the steering wheel, the coil springs may be prone to twisting. RS-R suspension utilizes roller bearings to eliminate spring twist noise.
Comfort and Adjustment
Rubber padding is utilized to help eliminate potential noise from suspension movements. Damper adjustment dials are up to 36 way adjustable to tune the shocks compression and rebound to each individuals needs for almost any driving condition.
Damping Adjustment
Damper adjustment dials are up to 36 way adjustable to tune the shocks compression and rebound to each individuals needs for almost any driving condition.
Refined Camber Tuning
If desired, the upper mounts on select vehicles can add 1.5 degree of camber from the preset setting by unbolting the upper mount and rotating the plate 180 degrees. (for more precise control of camber, adjustable camber plates are available for select models)
|,|"Shipping Cost" "add(+$95)"|-||-|||-||MAZDA-MIATA-SATIN-CLIMATE-CONTROL-CAPS-BY-IL-MOTORSPORT-2006-2008|,|20MAMIINDA|,|Mazda MX-5 Miata Satin Climate Control Caps by IL Motorsport 2006-2008|,|909-375|,|79.99|,|69.98|,||,||,||,||,||,||,|Mazda MX-5 Miata Satin Climate Control Caps by IL Motorsport 2006-2008
Bright silver accents add elegance like no other modification. These caps from IL Motorsport are made from billet aluminum with a brushed silver finish for a great look. These caps just pop on your existing knobs, no double-sided tape or adhesive is needed.
|,|||-||MAZDA-MX-5-MIATA-SILVER-SHIELD-SUNSCREEN-2006-2014|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Silver Shield Sunscreen 2006-2014|,|SH174-0|,|59.99|,|39.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Silver Shield Sunscreen 2006-2014
SILVER SHIELD™ - THE CUSTOM SOLAR SHIELD FOR PROTECTION BY REFLECTION
The SILVER SHIELD™ is constructed from a durable, 3-ply, reflective laminate material with an inner foam core; which reduces interior heat build-up by as much as 45°F! It installs easily in seconds and stores just as quickly with our handy sewn-in Velcro strap.
RETURN TO COOLER MORE COMFORTABLE VEHICLE.
SILVER SHIELD™ is the best way to keep your car cool when parked. Not only does it reduce interior heat build up by as much as 45°, it also helps prevent costly dashboard cracking, while protecting your seats and other interior fabrics.
Rolls up easily for quick storage ...
LIFETIME Warranty.
Enjoy returning to a cooler more comfortable vehicle!
|,|||-||MIATA-SMOKED-SIDE-MARKER-LIGHTS-BY-IL-MOTORSPORTS|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Smoked Side Marker Lights by IL Motorsports 2016-2019|,|910-271|,|59.99|,|44.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Smoked Side Marker Lights by IL Motorsports 2016-2019
The IL Motorsport replacement side indicator lights are a great functional upgrade to your ND. The factory indicator is a one-piece design so when it fails you have to buy a whole new light assembly not just a bulb. The IL Motorsports lights are two pieces so you can replace just the bulb. Comes in two styles clear, like the factory, or smoked and is a simple plug and play install.
Color: Smoked
|,|||-||SOFTTOPPARTS|,|MAZDA-MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-2016|,|MAZDA MX-5 MIATA SOFT TOPS PARTS|,||,||,||,||,||,||,||,||,||,||,|||-||GEMAMISPBE20|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 Miata Speaker Bezels 2006-2008|,|MS-909-225-1|,|85.99|,|77.58|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Chrome Speaker Bezels 2006-2008
Match your speaker trim rings to your other sporty look interior. Comes in Chrome Finish.
|,|||-||MAZDA-MX-5-MIATA-STAINLESS-STEEL-DUAL-TIP-MUFFLER-BY-COBALT-2006-2014|,|19MAMIEXSYMU1|,|Mazda MX-5 Miata Stainless Steel Dual Tip Muffler by Cobalt 1999-2015|,|909-680|,|449.99|,|399.95|,||,||,|15.000 |,||,||,||,|Mazda MX-5 Miata Stainless Steel Dual Tip Muffler by Cobalt 2006-2015
A popular dual tip design is now available from the Cobalt brand! These new mufflers feature a laser-etched Cobalt logo on the tips and carry over all the same great features and sound from their other designs:
* 1.2 mm thick polished Stainless Steel used for muffler shell, tips, and piping
* Muffler packing is a combination of stainless steel wool and fiberglass for a perfect sports car sound that is never intrusive, raspy or drones on the highway
* Stainless Steel used for inner core and perforated tubing
* 2-3/8" Pipe Diameter
* Entire muffler completely polished to a mirror shine
* Sporty 3-1/2" insulated and polished muffler tips
* Easy bolt-on design
* CA emissions legal
* 5-Year Warranty
|,|"Select Year" "Select Here" "1999-2005 (909-680) add(+$30)" "2006-2015 w/o Appearance Package (909-695)"|-||-|"Shipping Cost" "add(+$95)"|-||-|||-||STO934-45006|,|20MAMIBRROBR|,|Mazda MX-5 Miata StopTech Street Axle Brake Kit 2006-2015|,|sto934-45006|,|874.11|,|704.02|,||,||,||,||,||,||,|Mazda MX-5 Miata StopTech Street Axle Brake Kit 2006-2015
StopTech Axle Packs are pre-matched, direct-fit brake pad and rotor pairings designed to simplify brake service and brake system upgrades for virtually any car or truck on the road. They are the easiest way for drivers to replace their existing rotors and pads with high quality, premium feature, high performance components from the championship-winning team at StopTech.
Available as front axle, rear axle or 4-wheel kits, Axle Packs simplify the upgrade process by providing application-specific, pre-matched systems, that take the guesswork out of mixing and matching individual components. The rotors and pads are carefully matched to provide optimal performance for a variety of specific vehicle and driver needs.
StopTech Axle Packs deliver the high performance and high quality that StopTech and Centric Parts are known for, and are available for most import and domestic vehicle applications, from basic daily driver replacement components to high performance sports car and truck upgrades.
*Contents:* Drilled and/or slotted high performance StopTech Sport Rotors and Posi Quiet Premium Pads
*Application:* For drivers who want improved braking performance and enhanced looks, with low dust and low noise
Description: Street Axle Pack, Slotted, 4 Wheel
1 x sto126.45064SL StopTech Power Slot Mazda Mazda6 Slotted Left Rear Rotor
1 x sto126.45064SR StopTech Power Slot Mazda Mazda6 Slotted Right Rear Rotor
1 x sto126.45075SL StopTech Mazda Miata NC Slotted Left Front Sport Brake Rotor
1 x sto126.45075SR StopTech Mazda Miata NC Slotted Right Front Sport Brake Rotor
1 x sto308.11790 StopTech Street Touring 06-08 Mazda Miata MX-5 Front Brake Pads
1 x sto308.11800 StopTech Street Touring Brake Pads
Description: Street Axle Pack, Drilled & Slotted, 4 Wheel
1 x sto127.45064R StopTech Mazda Mazda6 Slotted & Drilled Right Rear Rotor
1 x sto127.45064L StopTech Mazda Mazda6 Slotted & Drilled Left Rear Rotor
1 x sto127.45075L StopTech 06-10 Mazda Miata MX-5 Drilled & Slotted Front Left Rotor
1 x sto127.45075R StopTech 06-10 Mazda Miata MX-5 Drilled & Slotted Front Right Rotor
1 x sto308.11790 StopTech Street Touring 06-08 Mazda Miata MX-5 Front Brake Pads
1 x sto308.11800 StopTech Street Touring Brake Pads
|,|"Select Option" "Select Here" "Slotted" "Slotted & Drilled add(+$120)"|-||-|"Shipping & Handling" "add(+$85)"|-||-|||-||CARBON-TRUNK-SPOILER-NA|,||,|Mazda MX-5 Miata Trunk Spoiler 1990-1997|,|CMCF3|,|259.00|,|168.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Trunk Spoiler 1990-1997
*Carbon Fiber Pictured
*Availability: 25 - 35 days production time
This carbon fiber trunk spoiler has a unique design matching the Miata Mx-5 line and gives the back of your car a sporty touch. Fits perfectly with the carbon rear panel.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in ABS plastic, Fiberglass (FRP), Carbon Fiber. You can select the material to see the price.
|,|"Select Material" "Select Here" "ABS plastic" "Fiberglass" "Carbon Fiber add(+$110)"|-||-|"EMS Shipping Cost" "add(+$55)"|-||-|||-||MAZDA-MX-5-MIATA-TRUNK-SPOILER-2016-|,||,|Mazda MX-5 Miata Trunk Spoiler 2016+|,|CM-TS1-ND|,|249.99|,|184.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Trunk Spoiler 2016+
This carbon fiber trunk spoiler has a unique design matching the Miata Mx-5 line and gives the back of your car a sporty touch.
The carbon kevlar is pictured in those shots.
Specifications:
– 3K Carbon Fibre 1×1 twill (Made in Japan)
– 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag process
– 45 degree weaving
– Anti-UV gloss clear coating for a long lasting shine and protection
*Availability: 6-8 weeks production time
|,|"Material" "Please Select" "Fiberglass" "Carbon Fiber add(+$100)" "Kevlar add(+$120)"|-||-|"Shipping Cost" "add(+$55)"|-||-|||-||MAZDA-MX-5-MIATA-VAMPIRE-TEETH-GRILLE-INSERT|,|NBGRILLANDBRA|,|Mazda MX-5 Miata Vampire Teeth Grille Insert|,|Miata-Vampire-Teeth-Grille-Insert|,|92.99|,|79.99|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Vampire Teeth Grille Insert
You Can 'Count' on This One
Rule the night and day with fangs fit for a Count. Put the strength, power, and romance of the vampire into your car. Not just for after dark, these work great for Halloween dress-up and to add a little mystery to your steed.
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
|,|||-||MAZDA-MX-5-MIATA-VENT-RINGS-BY-IL-MOTORSPORT-2016-2017|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Vent Rings by IL Motorsport 2016-2017|,|910-635-6|,|49.99|,|39.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Vent Rings by IL Motorsport 2016-2017
Add a touch of brightness to your interior by dressing up your air vents. This set of three covers by IL Motorsport uses strong, double-sided, 3M tape to attach to your stock vents, so they are very easy to install.
|,|"Select Type" "Select Here" "Chrome" "Silver"|-||-|||-||CARBON-VINTAGE-LED-TAIL-LIGHTS-NB|,||,|Mazda MX-5 Miata Vintage LED Dual Tail Lights 1999-2005|,|CMCF83|,|499.99|,|402.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Vintage LED Dual Tail Lights 1999-2005
*Please allow 6-8 weeks for production
New release is our vintage style tail light kit, giving the rear a more refined appearance with vintage cues and modern flare. The whole assembly is done in full led with the brake, driving, reverse and signals all in led.
Included in the kit are:
- 4 LED tail lights with tail/stop/direction/reverse functions
- 2 lights surrounds available in three different finishes: fiberglass, carbon fiber and carbon kevlar
- Kit includes the panels, tail lamp assemblies, harness with built in resistors. Fully plug and play.
|,|"Material" "Select Here" "Fiberglass" "Carbon Fiber add(+$100)" "Carbon Kevlar add(+$130)"|-||-|"EMS Shipping Cost" "add(+$55)"|-||-|||-||908-168|,|SOFTTOPNC|,|Mazda MX-5 MIATA Vinyl Convertible Top by Xtreme 2006-2015 *SALE* |,|908-168|,|676.00|,|594.02|,||,||,||,||,||,||,|Mazda MX-5 MIATA Vinyl Convertible Top by Xtreme 2006-2015
Xtreme brand replacement convertible tops offer high-quality construction with Cab grain acoustic vinyl material for a great price! These tops are perfect for the Miata owners who usually leave their top down, or are saving for other upgrades.
Xtreme auto tops are constructed as one-piece design, with original-style top deck seams. The material, Cab grain vinyl is a 2-ply composite with a heavy duty PVC outer layer and a 100% Polyester laminated backing. Get great craftsmanship and high quality build at a lower price!
Features:
One-piece design is better than OEM
Heated glass rear window
3 Year Warranty
Please Note:
Xtreme tops do not come pre-drilled for rain rail installation, and will require some modifications.
These tops DO NOT include hardware such as rivets, which will have to be purchased separately.
Xtreme Tops' Warranty is partially dependent on the top being professionally installed. No Zipper Defroster Glass, Streamline
|,|||-||ROMISOTO20|,|MAZDA-MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-2016|,|MAZDA MX-5 MIATA VINYL TOPS 1990-2005|,||,||,||,||,||,||,||,||,||,|
|,|||-||GAMISOTO20|,|MAZDA-MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-2016|,|MAZDA MX-5 MIATA VINYL TOPS 2006-2015|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-WABBIT-TEETH-GRILLE-INSERT|,|NBBODYSTYLING|,|Mazda MX-5 Miata Wabbit Teeth Grille Insert |,|mazda-mx-5-miata-wabbit-teeth-grille-insert|,|92.99|,|82.55|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Wabbit Teeth Grille Insert
Just Plain Fun: You just can't have more fun with an auto accessory. Think of it as a bunny, beaver, mouse,
or your favorite cartoon character. Such a small
change, such a unique look for your car.
Product Information:
Our decorative grille inserts are made from an exterior grade acrylic/PVC alloy chosen
for its durability. The material is called Kydex 100, and it is used extensively in the
transportation industry. For more information and technical specifications, click the
link below.
All suppliers, cutters, and finishers are US companies. Yes, the teeth ultimately will be
mounted on a foreign car, but that cannot be helped.
The cut teeth are hand finished to remove all cutting residue, packaged to keep them
clean, and then shipped to your location directly from our warehouse.
Miata Teeth Mounting
The Mazda Miata mounting system uses existing holes in the grille, and we furnish all the mounting hardware you will need. No drilling or professional installation is needed.
You'll be on your way to smiles and waves in about 1/2 hour.
Installation has been verified in the following Miata model years: 1990-1997, 1999-2001. Many customers report they have installed the teeth in newer models,
but we have not verified these installations personally. If you're bit of a tinkerer, you'll be up to the challenge.
|,|||-||MAZDA-MX-5-MIATA-WEATHERTECH-CARGO-TRUNK-LINER-2016|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata WeatherTech Cargo/Trunk Liner 2016+|,|WT40826|,|135.95|,|107.05|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata WeatherTech Cargo/Trunk Liner 2016+
Cargo Liners
WeatherTech® Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicle’s interior, protecting your investment from normal wear and tear.
Made from a proprietary custom blended TPE that is not only wear resistant, but also remains flexible under temperature extremes. WeatherTech® Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet.
WeatherTech® Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.
Cargo Liners Offer:
Interior protection from all types of wear and tear
Custom molded specifically for your vehicle
Easy installation
High outside lip that helps contain spills
Quick and easy cleanup
A skid-resistant surface
Protects and preserves the cargo area and trunk carpet
Toughness and durability
WeatherTech® Bumper Protector
The WeatherTech® Bumper Protector is a great addition to your Cargo Liner to help protect the surface of your vehicle’s bumper from dings and scratches when loading or unloading personal items or pets. The Bumper Protector is made from highly durable vinyl fabric that easily snaps onto your Cargo Liner by stainless, rust resistant snaps. The WeatherTech® Bumper Protector comes in two sizes: 30" x 30" and 30" x 40". Bumper Protectors are vehicle specific so the correct size option will be shown for your vehicle.
To protect your bumper, simply snap on the Bumper Protector to your Cargo Liner, unravel the Bumper Protector so that it covers your vehicle’s bumper, and when not in use, easily roll up and secure with sewn in Hook and Loop straps to hold the Bumper Protector in place. Item is easily removable for cleaning.
**The WeatherTech® Bumper Protector is only available in Black for select vehicles.
Please note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
|,|"Application" "Mazda MX-5 Miata 2016"|-||-|||-||140-15034|,|NEW|,|Mazda MX-5 Miata Wilwood Dynapro Radial-MC4 REAR Parking Brake Kit 2006-2015|,|140-15034|,|2,190.14|,|1,950.00|,||,||,||,||,||,||,|Mazda MX-5 Miata Wilwood Dynapro Radial-MC4 REAR Parking Brake Kit 2006-2015
*NOTE: Brake Line Kit 220-15043 is included in this Brake Kit.
*This Brake Kit may fit 17-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.
Dynapro Radial-MC4 Rear Parking Brake Kit
Dynapro 4 Radial-MC4 Rear Axle Kits replace the factory disc brakes and use the MC4 parking brake assembly as a compliment to front big brake upgrades on late model high performance vehicles. High capacity braking from the Dynapro Radial calipers, BP-10 compound pads, and oversized 12.88" rotors are matched to the OE master cylinder output, ABS function, and individual vehicle bias requirements. Enhanced brake performance, increased durability, and high-tech style compliment big wheel, tire, and suspension upgrades on customized vehicles and all others with increased brake requirements.
|,|"Options" "Slotted Rotor Black Calipers" "Drilled & Slotted Rotor Black Calipers add(+$140)" "Slotted Rotor Red Calipers" "Drilled & Slotted Rotor Red Calipers add(+$140)"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||61-1966|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Wilwood Forged Dynalite Front 12.19" Big Brake Brake Kit 2016-2020|,|140-14233|,|1,025.95|,|890.99|,||,||,||,||,||,||,|Mazda MX-5 Miata Wilwood Forged Dynalite Front 12.19" Big Brake Brake Kit 2016-2020
Forged Dynalite Big Brake Front Brake Kit (Hat)
Forged Billet Dynalite calipers, oversized rotors, and high performance Wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts. These kits are the perfect complement to wheel, tire, and suspension upgrades. Options for caliper finish and rotor design make it simple to match the brake response and style preferences on all types of daily drivers, race vehicles, and ultra-styled show machines. Each kit is engineered specific for each vehicle. They are fully compatible with OE master cylinder output while retaining the full factory ABS functions.
Direct from Wilwood, a basic big brake kit for the MX5 with 12.19" rotors and 4 piston calipers. This is Wilwood's own kit, do not confuse this with our Goodwin Racing kits which use SOME Wilwood parts!
Great bargain choice for street and light performance use that fills out 17" wheels more than the factory 11" brakes. Uses an economy rotor with low vane count to keep the cost down. These kits are suitable for light duty use, NOT the same as our 12.88" kits. For high performance use, look to our Goodwin Racing 12.88" Big Brake Kits, which are designed for exceptional performance and longevity under hard use.
Details:
- Dynalite 4-piston caliper
- BP-10 street brake pads
- 12.19" Light duty straight-vane rotors
- Stainless steel brake lines
- Caliper brackets
- Hardware included
- Saves 8 lbs over the factory brakes
|,|"Select Caliper Color" "Select Here" "Black" "Red (140-14233-R)"|-||-|"Select Rotors" "Select Here" "Plain" "Drilled & Slotted (140-14233-D, 140-14233-DR) add(+$140)"|-||-|"Add Brake Line Kit (220-12948)" "Select Here" "Yes add(+$89)"|-||-|"Shipping & Handling fee" "add(+$105)"|-||-|||-||140-14234-|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata Wilwood Forged Dynapro 6 Front 12.88" Big Brake Brake Kit 2016-2020|,|wilwood-140-14234|,|1,635.55|,|1,375.04|,||,||,||,||,||,||,|Mazda MX-5 Miata Wilwood Forged Dynapro 6 Front 12.88" Big Brake Brake Kit 2016-2020
Forged Dynapro 6 Big Brake Front Brake Kit (Hat)
The enhanced brake capacity and pad performance of the DynaPro 6 forged billet six-piston caliper is combined with 12.88” diameter rotors for this group of front wheel drive sport compact kits. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.
|,|"Select Caliper Color" "Select Here" "Black" "Red (140-14234-R)"|-||-|"Select Rotors" "Select Here" "Plain" "Drilled & Slotted (140-14234-D, 140-14234-DR) add(+$140)"|-||-|"Wilwood stainless steel brake line kit" "Select Here" "add(+$89)"|-||-|"Shipping cost" "add(+$105)"|-||-|||-||WILWOOD-NC-BBK|,|20MAMIBRROBR|,|Mazda MX-5 Miata Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kit - Hat 2006-2015|,|WWB-140-12907|,|2,117.34|,|1,980.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata Wilwood Front Big Brake Kit 12.88" 2006-2015
*NOTE: Brake Line Kit 220-12948 is included in this Brake Kit.
*This Brake Kit may fit 17-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.
* 12.88" Diameter Rotors
Trust the Wilwood name to get your high-performance Miata to stop on a dime! These kits have everything you need and all the options you’ve dreamed of: big 12.88" rotors, huge 6-piston calipers in red or black powdercoat and your choice of slotted or cross-drilled/slotted rotors. These are designed by Wilwood specifically for the 2006-2014 Miatas, with simplified installation and completely compatible with your OEM master cylinder and ABS. These kits are complete with everything you need. For front brakes only.
Features:
Kit specifically designed for 2006-2015 Miatas
Billet 6-piston calipers using stainless steel pistons for corrosion resistance and low heat transfer
Large 12.88" diameter rotors
Rotors cast from iron with vanes for heat management and lowered rotating mass and unspring weight
Upgrade rotors to slotted/cross-drilled for further weight and heat loss – e-coating prevents corrosion
Wilwood’s BP-10 pad material designed for improved yet quiet stopping power with low dusting
Absolutely everything you need is in the kit
No modifications needed to your Miata, this kit even works with the OEM master cylinder
Full instructions included
The 12.88" rotor kit includes a wheel spacer for stock 17" wheel fitment.
|,|"Options" "Slotted Rotor Black Calipers" "Drilled & Slotted Rotor Black Calipers add(+$140)" "Slotted Rotor Red Calipers" "Drilled & Slotted Rotor Red Calipers add(+$140)"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||140-12911|,|NEW|,|Mazda MX-5 Miata Wilwood Forged Narrow Superlite 6R Big Brake Front Brake Kit 14" - Hat 2006-2015|,|140-12911|,|2,325.31|,|2,070.95|,||,||,||,||,||,||,|Mazda MX-5 Miata Wilwood Front Forged Narrow Superlite 6R Big Brake Front Brake Kit 14" - Hat 2006-2015
*NOTE: Brake Line Kit 220-12948 is included in this Brake Kit.
*This Brake Kit may fit 18-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel.
* 14" Diameter Rotors
Trust the Wilwood name to get your high-performance Miata to stop on a dime! These kits have everything you need and all the options you’ve dreamed of: big 14" rotors, huge 6-piston calipers in red or black powdercoat and your choice of slotted or cross-drilled/slotted rotors. These are designed by Wilwood specifically for the 2006-2014 Miatas, with simplified installation and completely compatible with your OEM master cylinder and ABS. These kits are complete with everything you need. For front brakes only.
Features:
Kit specifically designed for 2006-2015 Miatas
Billet 6-piston calipers using stainless steel pistons for corrosion resistance and low heat transfer
Large 14" diameter rotors
Rotors cast from iron with vanes for heat management and lowered rotating mass and unspring weight
Upgrade rotors to slotted/cross-drilled for further weight and heat loss – e-coating prevents corrosion
Wilwood’s BP-10 pad material designed for improved yet quiet stopping power with low dusting
Absolutely everything you need is in the kit
No modifications needed to your Miata, this kit even works with the OEM master cylinder
Full instructions included
The 14" rotor kit includes a wheel spacer for stock 18" wheel fitment.
|,|"Options" "Slotted Rotor Black Calipers" "Drilled & Slotted Rotor Black Calipers add(+$130)" "Slotted Rotor Red Calipers" "Drilled & Slotted Rotor Red Calipers add(+$130)"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||MAZDA-MX-5-MIATA-WINDRESTRICTOR---CLEAR--NO-LOGO--NO-LIGHTS-2006-2013|,|20MAMIINAC|,|Mazda MX-5 Miata WindRestrictor - Clear, No Logo, No Lights 2006-2015 |,|windrestrictor-clear-no-logo-no-lights|,|199.99|,|168.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata WindRestrictor - Clear, No Logo, No Lights 2006-2015
Block the noisy and tiresome wind and add style to your MX-5 Miata with a WindRestrictor! This well-engineered, durable product blocks wind turbulence, helps retain top-down cabin temperature, mounts solidly and inconspicuously, and remains in place with the top up. Made from double-sided abrasion-resistant polycarbonate, this WindRestrictor will remain clear and scratch-free for a long time.
|,|"Select Glass" "Select Here" "Clear" "Smoke Tinted add(+$29)"|-||-|"Handling Fee" "add(+$9.99)"|-||-|||-||MAZDA-MX-5-MIATA-WINDRESTRICTOR-ROADSTER-ENGRAVED--LIGHTED-2006-2013|,|20MAMIINAC|,|Mazda MX-5 Miata WindRestrictor - Engraved, Lighted 2006-2015|,|windrestrictor-engraved--lighted|,|339.99|,|285.05|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata WindRestrictor - Engraved, Lighted 2006-2015
Block the noisy and tiresome wind and add style to your MX-5 Miata with a WindRestrictor! This well-engineered, durable product blocks wind turbulence, helps retain top-down cabin temperature, mounts solidly and inconspicuously, and remains in place with the top up.
Made from double-sided abrasion-resistant polycarbonate, this WindRestrictor will remain clear and scratch-free for a long time. Add the laser-etched Roadster logo which is perfect on the MX-5 or go for the ultimate statement and add LED lighting! The logo and edges will light up, you can wire the lights to the brakes or any 12-volt wire.
There is no drilling for installation although the lighted version will need electrical work, full instructions are included! Add the dimmer switch pack to custom-tine your lighting, it also adds a Remote Control feature.
WindRestrictor Dimmer and Remote
An add-on accessory to the Lighted WindRestrictors, this box allows you to turn the light on or off, or dim to your desired brightness. Also includes a remote so you can operate the lighted function while you are outside your Miata.
Add the "Dimmer and Remote" by checking the "add" on the additional accessories section on the right.
|,|"Select An Etching Design" "Select Etching Here" "Miata" "Roadster" "MX-5"|-||-|"Select An Illumination Color" "Select Color Here" "Red" "Purple" "Blue" "White" "Amber" "Green" "Pink"|-||-|"Handling fee" "add(+$12)"|-||-|||-||MAZDA-MX-5-MIATA-WINDRESTRICTOR---ENGRAVED--NO-LIGHTS-2006-2013|,|20MAMIINAC|,|Mazda MX-5 Miata WindRestrictor - Engraved, No Lights 2006-2015|,|windrestrictor--engraved-no-lights|,|229.99|,|205.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata WindRestrictor - Engraved, No Lights 2006-2015
Block the noisy and tiresome wind and add style to your MX-5 Miata with a WindRestrictor! This well-engineered, durable product blocks wind turbulence, helps retain top-down cabin temperature, mounts solidly and inconspicuously, and remains in place with the top up. Made from double-sided abrasion-resistant polycarbonate, this WindRestrictor will remain clear and scratch-free for a long time. Add the laser-etched logo which is perfect on the MX-5.
There is no drilling for installation although the lighted version will need electrical work, full instructions are included!
|,|"Select An Etching Design" " Select Here" "Miata" "Roadster" "MX-5"|-||-|"Select Glass" "Select Here" "Clear" "Smoke Tinted add(+$39)"|-||-|"Handling fee" "add(+$9.99)"|-||-|||-||MAZDA-MX-5-MIATA-WINDRESTRICTOR-DIMMER-AND-REMOTE|,|20MAMIINAC|,|Mazda MX-5 Miata WindRestrictor Dimmer and Remote|,|windrestrictor-dimmer-and-remote|,|49.99|,|39.95|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata WindRestrictor Dimmer and Remote
An add-on accessory to the Lighted WindRestrictors, this box allows you to turn the light on or off, or dim to your desired brightness. Also includes a remote so you can operate the lighted function while you are outside your Miata.
NOTE: This is ONLY the "WindRestritor Dimmer and Remote", it does NOT come with the WindRestrictor. WindRestrictor is Sold Separately.
|,|||-||MAZDA-MX-5-MIATA-WINDSHIELD-WASHER-RESERVOIR-TANK--2016-|,|MIATA-MAINTENANCE-2016-|,|Mazda MX-5 Miata Windshield Washer Reservoir Tank, 2016+|,|MMRT-MIA-16T|,|215.00|,|170.05|,||,||,||,||,||,||,|Mazda MX-5 Miata Windshield Washer Reservoir Tank, 2016+
Features
* Direct-fit for the 2016+ Mazda Miata
* Durable, lightweight, fully tig-welded aluminum
* Aluminum construction is more resistant to discoloration and cracking than stock plastic tank
* Reduces washer fluid capacity by 0.75 gallons, therefore reducing total filled weight
* Filled reservoir is 6 lbs lighter than filled stock tank
* Special ventilation system ensures no fluid leaks
* Includes black Mishimoto fill cap
* Available in polished or black powder coat
* Installs in under 30 minutes
* Mishimoto Lifetime Warranty
|,|"Options" "Select Here" "Polished" "Black"|-||-|||-||ZEROMOTIVE-CONSOLE-COVER|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Mazda MX-5 MIata Zeromotive Console Cover 2006-2014|,|zeromotive-console-cover|,|139.99|,|125.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 MIata Zeromotive Console Cover 2006-2014
Center Console Cover made by Zeromotive in Japan. It’s made of beautiful brushed stainless steel (0.3MM). It’ll add a classic and luxury look to the interior of the vehicle.
• Made of SUS304
• Easy to install using 3M double-sided tape
• Looks awesome
• Only available for NC MX-5 (2006-2014)
|,|"Select Year" "Select Here" "NC1 (2006-2008)" "NC2 (2008-2012)" "NC3 (2013-2014)"|-||-|||-||MAZDA-MIATA-ZOOM-MONACO-240-REAR-VIEW-MIRROR|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 Miata ZOOM Monaco 240 Rear View Mirror|,|mazda-miata-zoom-monaco-240-rear-view-mirror|,|289.99|,|249.00|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata ZOOM Monaco 240 Rear View Mirror
The Monaco 240 rear view (room) mirror made by ZOOM Engineering will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 240mm wide, 80mm vertical and 96mm deep. It offers a wider view than OEM mirror for better safety. It also will help reduce glare from cars behind your vehicle.
Please note that the shape is made for Right Hand Drive but can also be used on Left Hand Drive, however, you might see a part of your body in the mirror view.
-Better view than OEM mirror
-Measures 240mm x 80mm x 96mm
-Reduces glare from cars behind
-Includes rear view mirror & mounting arm
-Unique shape
-Fits ALL YEARS Mazda Miata
|,|"Application" "SELECT APPLICATION" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)" "ND (16+)"|-||-|"Finish" "SELECT FINISH" "Black" "Black Carbon Fiber add(+$40)" "Kevlar Carbon Fiber add(+$40)" "Metallic Blue add(+$10)" "Metallic Dark Grey add(+$10)" "Metallic Silver add(+$10)" "Red" "Silver Carbon Fiber add(+$40)" "White" "Yellow"|-||-|||-||61-1733|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 RoadsterSport RACE 2016-2023|,|61-1733|,|485.25|,|418.00|,||,||,||,||,||,||,|Mazda MX-5 RoadsterSport RACE 2016-2023
Most FUN Miata race muffler right here, yet not for everyone!
Call it Dual Personality, Call it Jekyll and Hyde, this is the Rebel in our exhaust lineup and the sound level result depends on what you are doing with the gas pedal and the gear selection. Slam the gas to the floor and run for redline and you get a wonderfully throaty throbbing exotic racing rumble with lots of burble that sounds BETTER than an MX5 Cup Car. BUT when you close throttle you do NOT get the drone and cabin resonance of those pure race cars, instead it gets mild on decel, downright quiet when just cruising in top gear on the freeway. What we have here is the first Miata Race muffler sane folks can really live with every day without pissing off the wife or the neighbors (unless they WANT to).
Continuing with the dual personality, with the top DOWN it makes lots of fun sound as you work the gears, yet with the top up and cruising just a mild purr on mild acceleration and no drone when you close the throttle or engine brake or run light throttle up hill.
The secret to getting all this fun without the pain of drone on decel is the exclusive Helmholtz chamber included in this design. In fact, this design is ALL Helmholtz and no traditional sound absorbing materials unless you get the optional race baffle.
How did we do it? We outfitted our 2016 with a computer and sound spectrum analyzer and microphones and drove it under varying conditions and loads with and without muffler. We then use that data and some special software to calculate the particulars of the Helmholtz chamber to precisely knock down the frequencies we do not want to hear in the car while allowing the good throaty burble fun sounds to pass through. In brief, FUN when you want it, and mild when just cruising.
All this in an 11 pound design, which is about half the weight of the 20.5 pound factory muffler. Includes a straight through high flow design from the midpipe out the polished pipe tip for max power.
SHIPPING NOTE...ships factory direct to you. All POLISHED stainless steel construction and LIFETIME warranty. Uses stock hangers and connects to either our midpipe or the stock midpipe.
Takes our optional Race Baffle that slides in and lowers sound level for the extra long drives or between racing weekends (baffle sold separate on this website).
Proudly made in the USA.
BRIAN'S APPLICATION NOTES: Mild when cruising on otherwise stock ND, delivering a classic sports car BARK and THROATY RUMBLE when you wind it out to redline, lots of fun burble when just playing with the throttle around town. Result is TONS of fun, will make many of you laugh out loud. You also get the best performance from the straightest and cleanest flow out the exhaust cutout you can get, and much lower weight. Nonetheless, this choice is NOT for the faint of heart!!! The most common question we will get on this one is: "will it be too loud" and we cannot answer that one for you because the "right" sound level is a matter of entirely subjective personal preference. However, if our RoadsterSport SuperQ is 10 to 15% more sound than stock (depending on use of removable baffle), this RACE is a full 50 to 55% more sound than stock when on throttle, though perhaps just 20% over stock when cruising home in high gear and low rpms. Works well with factory midpipe and our RoadsterSport midpipe, NOT recommended for customers changing header (see our RoadsterSport SuperQ for Header.)
Slant cut to dress it up just a bit and drop weight to even 11.0 pounds!
|,|"Shipping cost" "add(+$89)"|-||-|||-||MAZDA-MX-5-RS-R-SPORTS-I-COILOVERS-W-PILLOWBALL-UPPER-MOUNT-2016-|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Mazda MX-5 RS-R Sports I Coilovers with Pillowball Upper Mount 2016+|,|XSPIM032MP|,|2,799.99|,|2,398.00|,||,||,||,||,||,||,|Mazda MX-5 RS-R Sports I Coilovers with Pillowball Upper Mount 2016+
Spirited weekend track drives do not have to sacrifice daily driving comfort or performance. Designed for the performance enthusiast in mind, the RS-R Sports-I coilover system provides a comfortable ride for everyday use, yet is sufficient enough for those effervescent track days.
Compatibility: 2016+ Mazda MX-5
Chassis code: ND
Preset Approximate Height From RS-R:
Front -25mm to -30mm (-1.0in to -1.2in)
Rear -20mm to -25mm (-0.8in to -1.0in)
Maximum Adjustment Ranges:
Front +10mm to -95mm (+0.4in to -3.8in)
Rear +5mm to -110mm (+0.2in to -4.3in)
Recommended Adjustments for Optimal Ride-ability:
Front -5mm to -55mm (-0.2in to -2.2in)
Rear -5mm to -45mm (-0.2in to -1.8in)
Spring Rates:
Front 6.0kg/mm
Rear 3.0kg/mm
Quality and Detail
The RS-R coilovers are all Monotube hand assembled systems specifically designed to improve ride quality, performance, and comfort. Utilizing components such as; laser cut upper mounts, hand welded lower brackets, vehicle specific valving, are all assembled by hand to ensure quality and detail.
Urethane Bushing Technology
Utilizing Urethane bushing instead of bearing to reduce excessive vibrations from every day driving, as well as minimizing noises from suspension movements.
The Silent Roller Bearings
On MacPherson type suspension, as the suspension rotates along with the steering wheel, the coil springs may be prone to twisting. RS-R suspension utilizes roller bearings to eliminate spring twist noise.
Comfort and Adjustment
Rubber padding is utilized to help eliminate potential noise from suspension movements. Damper adjustment dials are up to 36 way adjustable to tune the shocks compression and rebound to each individuals needs for almost any driving condition.
Damping Adjustment
Damper adjustment dials are up to 36 way adjustable to tune the shocks compression and rebound to each individuals needs for almost any driving condition.
Refined Camber Tuning
If desired, the upper mounts on select vehicles can add 1.5 degree of camber from the preset setting by unbolting the upper mount and rotating the plate 180 degrees. (for more precise control of camber, adjustable camber plates are available for select models)
|,|"Shipping Cost" "add(+$95)"|-||-|||-||LHP-MX501-TM|,|NBLIGHTING|,|Mazda MX5 Dual Halo LED Projector Headlights (Chrome Housing/Clear Lens) 2001-2005|,|LHP-MX501-TM|,|479.99|,|335.95|,||,||,||,||,||,||,|Mazda MX5 Dual Halo LED Projector Headlights (Chrome Housing/Clear Lens) 2001-2005
Comes with chrome housing clear lens projector headlights with dual halo + LED lights. Made by an ISO certified manufacturer using materials that meet strict OEM requirements. Headlights comes equipped with H1 high beam & H1 low beam bulbs
Bulbs not included for corner lights - Please use stock bulbs, sockets or wiring for installation.
Professional installation is highly recommended
|,|||-||MAZDA-MIATA-BLACK-HALO-PROJECTOR-HEADLIGHTS-WITH-LEDS-PAIR-2001-2005|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Mazda MX5 Dual Halo LED Projector Headlights (Matte Black Housing/Clear Lens) 2001-2005|,|LHP-MX501JM-TM|,|467.50|,|349.95|,||,||,|0.000 |,||,||,||,|Mazda MX5 Dual Halo LED Projector Headlights (Matte Black Housing/Clear Lens) 2001-2005)
Mazda Miata MX-5 2001-2005, Black Halo Projector Headlights with LEDs by Spec-D®, 1 Pair. While providing the modernized look, Halo Projector Headlights with LED produce crisper light with a stronger beam. Their more focused light illuminates the road better than any OEM lights at the same time it does not blind the oncoming drivers. "Angel Eyes" design is a trendy upgrade to the style.
BLACK HOUSING
DUAL HALO PROJECTOR DESIGN WITH LEDS
SOME WIRING REQUIRED FOR HALOS AND LEDS
SAE/DOT HEADLIGHTS MADE BY CERTIFIED AND APPROVED MANUFACTURERS TO ENSURE QUALITY & FITMENT
|,|||-||CF-RC|,|NAEXVIALL|,|Mazda MX5 Miata Carbon Fiber Radiator Cooling Slam Panel Cover Trim 1990-1997|,|CF-RC|,|349.00|,|235.05|,||,||,||,||,||,||,|Mazda MX5 Miata Carbon Fiber Radiator Cooling Slam Panel Cover Trim 1990-1997
Description:
Carbon Fiber Radiator Cooling Slam Panel Cover
Fitment:
Only Fit To Mazda MX5 NA MK1 Miata
Professional Body Work Shop Install Recommended.
Due to handcrafted product please accept minor adjustment while fitting
|,|||-||MIHA2HIDCOKI|,|NBACCESSORIES|,|Mazda MX5 Miata HID Xenon Conversion Kit 1999-2000|,|HO-XCH4-W|,|159.00|,|139.95|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata years 1999 and 2000.
Xentec
Lumens (Light Flux): 5800
Color Temperature: 3000K 5000K 6000K 8000K 10000K 15000K 30000K Green
Beam Type: Fog Lights, High Beam, Low Beam
Number of Bulbs: 2
Wattage: 35W
Voltage: 9V - 16V
Ballast Included: Yes
Type: HID Kit
Single beam Option: Fits Low Beam High Beam , Fog Lights
Color Options: Green Yellow OEM White Blue Dark Blue Purple Pink
|,|"Select Bulb Size" "Select Here" "Headlight Low Beam" "Headlight High/Halogen Low/HID" "Bi-Xenon Hi/Low HID"|-||-|"Select Color Output" "Select Here" "Golden Yellow - 3000K" "Hyper White - 5000K" "Diamond White - 6000K" "Light Blue - 8000K" "Dark Blue - 10000K" "Blue/Violet - 12000K" "Deep Blue - 15000K" "Pink - 30000K" "Green"|-||-|||-||MIHA2HIDCOKI2|,|NBACCESSORIES|,|Mazda MX5 Miata HID Xenon Conversion Kit 2001-2005|,|HO-XC9005-W|,|119.00|,|79.95|,||,||,|0.000 |,||,||,||,|Mazda MX5 Miata HID Xenon Conversion Kit 2001-2005
Xentec
Lumens (Light Flux): 5800
Color Temperature: 3000K 5000K 6000K 8000K 10000K 15000K 30000K Green
Beam Type: Fog Lights, High Beam, Low Beam
Number of Bulbs: 2
Wattage: 35W
Voltage: 9V - 16V
Ballast Included: Yes
Type: HID Kit
Single beam Option: Fits Low Beam High Beam , Fog Lights
Color Options: Green Yellow OEM White Blue Dark Blue Purple Pink
|,|"Select Bulb Size" "Select Here" "Headlight Low Beam" "Headlight High Beam" "Fog Lights"|-||-|"Select Color Output" "Select Here" "Golden Yellow - 3000K" "Hyper White - 5000K" "Diamond White - 6000K" "Light Blue - 8000K" "Dark Blue - 10000K" "Blue/Violet - 12000K" "Deep Blue - 15000K" "Pink - 30000K" "Green"|-||-|||-||MALEANDBRMXL|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Red Tear Drop Key Chain Key Chain|,|AG-KCRED-MAZ|,|21.95|,|14.95|,||,||,|0.000 |,||,||,||,|Mazda Red Tear Drop Key Chain Key Chain
Measures approximately 1.25” x 3.5".
|,|||-||MASTANDBLTEL|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Stainless and Black Teardrop Logo Key Chain|,|AGI-KCKMAZ|,|19.99|,|12.95|,||,||,|0.000 |,||,||,||,|Mazda Stainless Teardrop Logo Key Chain
KEY CHAINS:
Striking in appearance and crafted from superior materials, these key chains are unique, durable
and backed by a lifetime warranty against flaws in materials & workmanship. Packaged in an
attractive gift box.
|,|||-||MASTTEKEYCH|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Mazda Stainless Teardrop Logo Key Chain|,|AGI-KC3MAZ|,|19.99|,|12.95|,||,||,|0.000 |,||,||,||,|Mazda Stainless Teardrop Logo Key Chain
KEY CHAINS: Striking in appearance and crafted from superior materials, these key chains are unique, durable and backed by a lifetime warranty against flaws in materials & workmanship. Packaged in an attractive gift box.
|,|||-||ZOOM-ZOOM-KEY-CHAIN-RED|,|MIGIMOVIALL|,|Mazda Zoom Zoom Red Leather Key Ring|,|AGI-KC1740-ZOO-RED|,|21.95|,|17.95|,||,||,|0.000 |,||,||,||,|Mazda Zoom Zoom Red Leather Key Ring
Genuine red leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||MAMISPMU|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Mazdaspeed Miata OE-RS Sports Muffler 2004-2005|,|907-900|,|459.99|,|409.00|,||,||,|5.000 |,||,||,||,|Mazda Miata Sports Muffler
Available Years: 2004-2005
OE-RS series cat backs are based on factory style, with bigger piping, OEM style polished mufflers and quiet sound. The cat back system is made stainless steel. All piping are mandrel bent with a high polished finish. Exhaust system comes with all the necessary hardware needed for a direct bolt on installation. Improves HP with minimal noise.
SPECIFICATIONS & FEATURES:
- Mazdaspeed Miata 2004-2005
- T-304 Stainless Steel
- Direct bolt-on application
- 2.5" pipe
|,|"Shipping Cost" "add(+$95)"|-||-|||-||AL-SPEED|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Mazdaspeed Neck Pillow Foam Cushion Pad Head Support|,|AL-Speed|,|106.95|,|94.02|,||,||,||,||,||,||,|Mazdaspeed Neck Pillow Foam Cushion Pad Head Support
2Pcs Great High Quality MS MazdaSpeed Black Carbon Fiber Circular Neck Cushion Pillows Headrest Seats Circular Vip Headrests
|,|"Select Color" "Select Here:" "White" "Red"|-||-|||-||MEGANRACING|,|SHOP-BY-TOP-MIATA-BRANDS|,|Megan Racing|,||,||,||,||,||,||,||,||,||,||,|||-||MEGAN-RACING-MIATA-LOWERSP|,|19MAMISUANDS|,|Megan Racing Mazda Miata Lowering Springs 1990-1997|,|MR-LS-MX590|,|169.00|,|144.95|,||,||,|0.000 |,||,||,||,|Megan Racing Mazda Miata Lowering Springs 1990-1997
Megan Racing Performance Lowering Springs are constructed of SAE 9254 Cold Wounded Steel, one of the strongest materials available. The high tensile strength and phosphate powder coating delivers outstanding spring rates that are extremely durable and resist premature “sagging”.
The result is a spring that specifically offers racecar handling, yet maintains smooth and comfortable ride characteristics. Carefully matched springs rates provide exceptional handling, response, control and balance. These springs offer a generous drop to your car while remaining very “streetable” by having enough clearance to avoid bottoming-out; and the lowered center of gravity improves performance and increases stability, as well as enhancing the appearance of the vehicle. (Note: Spring rates and drop amount vary by different vehicle application and chassis load.)
- 250 lbs/in FR // 175 lbs/in RR
- 1.75"F & 1.5"R
|,|||-||MERAMIEZSTSE|,|19MAMISUANDS8|,|Megan Racing Miata EZ II Street Series Full Coilover 1990-2005 - Sale!|,|MR-CDK-MMX590-EZII|,|899.99|,|879.95|,||,||,|5.000 |,||,||,||,|Megan Racing Miata EZ II Street Series Full Coilover 1990-2005
Megan Racing EZ II Series coilover system is aimed towards the more budget oriented enthusiast to offer the most basic essentials from an after-market coil-over setup, yet makes no compromises for quality and performance.
SPECIFICATIONS & FEATURES:
APPLICATION:
Mazda Miata MX-5 1990-2005 NA6/NA8/NB1/NB2
SPRING RATES:
F: 8 kg/mm
R: 6 kg/mm
- 15 Levels of Adjustable Damper Strength
- Aluminum Brackets paired with rubber inserts
- Rubber Dust Covers
- Adjustable Ride Height
- Conservative Spring Rates
- Single-Cylinder Design - monotube
- All coil-over damper kits come with 1 year manufacturer-defect warranty.
- All Hardware is Included
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MEGAN-RACING-MIATA-EZ-II-STREET-SERIES-FULL-COILOVER-2006-2015|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Megan Racing Miata EZ II Street Series Full Coilover 2006-2015|,|MR-CDK-MMX506-EZII|,|899.99|,|797.95|,||,||,|5.000 |,||,||,||,|Megan Racing Miata EZ II Street Series Full Coilover 2006-2015
Megan Racing EZII Series coilover system is aimed towards the more budget oriented enthusiast to offer the most basic essentials from an after-market coil-over setup, yet makes no compromises for quality and performance.
SPECIFICATIONS & FEATURES:
APPLICATION:
Mazda NC Miata MX-5 2006-15
SPRING RATES:
F: 7 kg/mm
R: 5 kg/mm
- 15 Levels of Adjustable Damper Strength
- Aluminum Brackets paired with rubber inserts
- Rubber Dust Covers
- Adjustable Ride Height
- Conservative Spring Rates
- Single-Cylinder Design - monotube
- All coilover damper kits come with 1 year manufacture-defect warranty.
- All Hardware is Included
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||MERAMIFRUPAR|,|19MAMISUANDS11|,|Megan Racing Miata Front Upper Arm Bushings 1990-2005|,|MRS-MZ-0701|,|147.00|,|89.01|,||,||,|0.000 |,||,||,||,|Megan Racing Miata Front Upper Arm Bushings 1990-2005
Factory Miata bushings are made from a rubber compound, which deteriorates over the years. The Miata bushings become softer, therefore becoming less capable of resisting the forces being placed on them.
The Meganracing bushings on the other hand are 20%-30% stiffer and do not deteriorate in performance over time. The benefit of the increased stiffness will have more control of the suspension components making the driver feel more compfortable.
- 150% Harder that stock bushings
- Made with high-strength and anti-craking rubber material
- Rubber viscosity is around 2000KGS
- 4pcs/set
|,|||-||MERAMIPERA19|,|19MAMIENPEVI|,|Megan Racing Miata Performance Radiator 1999-2005|,|MGN-MR-RT-MM9816|,|345.00|,|269.00|,||,||,|0.000 |,||,||,||,|Megan Racing Miata Performance Radiator 1999-2005
We are proud to introduce the new Megan Racing high performance aluminum radiator. Anytime an individual introduces their car to a racing/drifting environment, the temperature of the vehicles engine will skyrocket. One common and effective method of reducing engine temperature is to employ an aluminum radiator.
This is a cost effective upgrade which can ultimately save an engine during competition or spirited driving. Often times, a temperature drop of twenty degrees or more will be noticed when using an aluminum radiator. Also included is a 1.1 BAR radiator cap.
ATTN: Please FLUSH the radiator before installation and properly take all the air pockets out. If its not properly installed, might cause the motor to over heat due to low coolant or air pockets in the cooling system.
- 3 rows
-Note: Since this is a 3 row radiator might require trimming to properly fit in to a stock location.
-Note: Will require modification for the mounting brackets.
|,|||-||MERAMIRELOAR|,|19MAMISUANDS11|,|Megan Racing Miata Rear Lower Arm Bushings 1990-2005|,|MRS-MZ-0721|,|255.00|,|144.02|,||,||,|0.000 |,||,||,||,|Megan Racing Miata Rear Lower Arm Bushings 1990-2005
Factory Miata bushings are made from a rubber compound, which deteriorates over the years. The Miata bushings become softer, therefore becoming less capable of resisting the forces being placed on them.
The Meganracing bushings on the other hand are 20%-30% stiffer and do not deteriorate in performance over time. The benefit of the increased stiffness will have more control of the suspension components making the driver feel more compfortable.
- 8pcs/set
- 150% Harder that stock bushings
- Made with high-strength and anti-craking rubber material
- Rubber viscosity is around 2000KGS
|,|||-||MERAMI90REUP|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Megan Racing Miata Rear Up Adjustable Arms 1990-1997|,|MGN-MRS-MZ-0722|,|360.00|,|319.02|,||,||,|0.000 |,||,||,||,|Megan Racing Miata Rear Up Adjustable Arms 1990-1997
These rear upper control arms available for the Miata chassis are an excellent upgrade. With it s adjustability you are able to carefully tune the vehicle s Rear-Camber to your specifications. The stock rubber bushings on the chassis are repalced with Re-inforced Rubber bushings and offers you a more direct and predictable feel that you require in competition.
With proper adjustment will allow the adjustment of proper camber which can greatly effect tire wear and performance. The adjustability and feel is also backed with the comfort that your stock thin tension rods are now replaced with thick steel contstructed arms that can withstand the stresses of competition.
- Will fit 90-97 Mazda Miata
- Adjustable lengths to tune Rear-Camber
- 150% Harder that stock bushings
- Made with high-strength and anti-craking rubber material
- Rubber viscosity is around 2000KGS
- Durable Steel construction to withstand high-stresses of competition.
- Powdercoated with brilliant blue finish for years of performance.
* Price is for the PAIR *
|,|||-||MERAMIREUPAR|,|19MAMISUANDS11|,|Megan Racing Miata Rear Upper Arm Bushings 1990-2005|,|MRS-MZ-0720|,|189.00|,|96.02|,||,||,|0.000 |,||,||,||,|Megan Racing Miata Rear Upper Arm Bushings 1990-2005
Factory Miata bushings are made from a rubber compound, which deteriorates over the years. The Miata bushings become softer, therefore becoming less capable of resisting the forces being placed on them.
The Meganracing bushings on the other hand are 20%-30% stiffer and do not deteriorate in performance over time. The benefit of the increased stiffness will have more control of the suspension components making the driver feel more compfortable.
- Package comes with Knuckle Bush total 6pc/set
- 150% Harder that stock bushings
- Made with high-strength and anti-craking rubber material
- Rubber viscosity is around 2000KGS
|,|||-||MERAMIREENMO|,|19MAMIENPEVI|,|Megan Racing Miata Reinforced Engine Mounts 1990-2005|,|MRS-MZ-0740|,|149.50|,|115.45|,||,||,|0.000 |,||,||,||,|Megan Racing Miata Reinforced Engine Mounts 1990-2005
The MX-5 Miata is a small roadster with minimal necessary weight and mechanical complexity. The MX-5 was designed with a traditional front-engine, rear-wheel-drive layout and four-wheel independent double wishbone suspension. It has a longitudinally-mounted four cylinder engine which made the car very spirited.
The body is a conventional, but very light, unibody shell or "monocoque", with a (detachable) rear subframe. The MX-5 also incorporates a unique trusswork whih minimized flex and created a tight, responsive feel. Many MX-5s feature limited slip differentials and anti-lock braking system.
With an approximate 50:50 front/rear weight balance, the car has very neutral handling, which makes it easy to drive for the beginner, and fun for the advanced driver. Inducing oversteer is easy and very controllable, thus making the MX-5 a popular choice.
Although the Miata had tons of potential, it is refined and well mannered, comfortable to drive in and stylish with a bit of aggression in it s curves. Although the initial design was sporty and aggressive it was still designed as a street car and comfort was a priority with soft rubber bushings all around to absorb vibration.
Through the years the soft rubber bushings deteriorate after constant flexing and vibration as well as being punished through weathering; this can cause them to tear and may seriously damage your engine and transmission. Megan Racing has developed a Hard-Rubber/Polyurethane motor mounts for the MX-5 Chassis that will fit both the 1.6L and 1.8L powerplants. These reinforced mounts are perfect for the enthusiast who is looking to get the most from their Miata as they will allow more energy to be transfered to the wheels instead of absorbing the energy into the soft rubber.
Sold as a set.
|,|||-||MEGAN-RACING-MIATA-TRACK-SERIES-FULL-COILOVER-1990-2005|,|19MAMISUANDS|,|Megan Racing Miata Track Series Full Coilover 1990-2005|,|MGN-MR-CDK-MMX590-TS|,|1,299.99|,|1,098.95|,||,||,|0.000 |,||,||,||,|Megan Racing Miata Track Series Full Coilover 1990-2005
Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.
Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.
Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.
The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.
SPECIFICATIONS & FEATURES:
APPLICATION:
-Mazda Miata MX-5 NA6/NA8/NB1/NB2 1989-2005
SPRING RATES:
F: 10 kg/mm
R: 8 kg/mm
- 32 Levels of Damper Force Adjustment
- Rubber Dust Boots
- Adjustable Ride Height
- Aggressive Spring Rates
- Single-Cylinder Design
- Aluminum Brackets
32 Levels of Adjustment:
1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.
- All coil-over damper kits come with 1-year manufacturer-defect warranty.
- All Hardware is Included
|,|"Shipping & Handling Cost" "add(+$99)"|-||-|||-||MERAMISTSE20|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Megan Racing MX-5 Miata Street Series Full Coilover 2006-2015|,|MGN-MR-CDK-MMX506|,|1,499.99|,|1,150.00|,||,||,|5.000 |,||,||,||,|Megan Racing MX-5 Miata Street Series Full Coilover 2006-2015
Megan Racing Coil-Over Dampers are the ultimate upgrade to your track or street car. Featuring 32 levels of damper force adjustment, separate spring perch height and shock length adjustment allowing you to retain full suspension stroke and to fine tune your suspension characteristics. These damper kits are then perfectly matched with front and rear Pillow Ball upper mounts, including camber plates integrated with the upper Pillow Ball mounts on strut-type suspension applications.
Compression and rebound settings are easily adjusted through a single damper adjustment knob which is built-in at the top of the damper mount for easy access. Adjustments are simple to tune according to your style of driving and desired comfort level whether you are a professional certified mechanic or an automotive enthusiast with amateur mechanical skills. All of our dampers are capable of handling a +2kg/mm or -2kg/mm change in spring rates to further tune your suspension to your desired handling characteristics.
Height adjustments are made with separate CNC-Machined locking spring perches for accuracy and smooth adjustment with separate damper shock length adjustment to retain full-stroke and allows for precision suspension tuning. The wide range of allowable ride-height adjustment allows you to retain the factory ride-height for OEM appearance with performance handling, drop your car all the way down for an aggressive stance, or fine tune your suspension for the race-track to lowering your center of gravity to gain full potential of your vehicle's handling capabilities.
On applications utilizing strut-type suspension designs, the Megan Racing Damper Kits come with fully adjustable Pillow-Ball upper mount camber plates to easily tune and adjust your camber, giving you a competitive edge over other suspension setups. This allows you to tune your car for any ride height and still adjust camber to improve handling, vehicle predictability and tire wear, which is a great benefit both on the race-track and on the street.
The quality and durability of the Megan Racing Damper kits are unmatched. Made of extremely durable Steel and featuring springs that are constructed of SAE-9254 Cold-Wound Steel which are then tested over 500,000 times by compression inspection. With deformation less than 5% and high strength sophisticated surface coating, we stand by our product with our strong warranty.
Features:
- Fits 2006+ Mazda MX-5 Miata
- Spring Rates: 7 kg/mm Front and 5 kg/mm Rear
- 32 Levels of Damper Force Adjustment
- Pillow Ball Upper Mounts
- Rubber Dust Boots
- Adjustable Ride Height
- Aggressive Spring Rates
- Single-Cylinder Design
- Aluminum Brackets
32 Levels of Adjustment:
1-8: Suggested for track use.
9-16: Suggested for mountain/aggressive use.
17-32: Suggested for common street use.
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||KALELO|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Meguiar's Gold Class Rich Leather Gel|,|Leather-lotion|,|24.99|,|14.95|,||,||,|0.000 |,||,||,||,| Meguiar's G17914 Gold Class Rich Leather Gel, 13.5 oz
All-in-one leather Treatment: gel formula cleans, conditions and protects for complete leather care in one easy step
Gentle formula: gentle cleaners effectively remove dirt and grime
No residue: non-greasy formula leaves no white residue or artificial Gloss, making it perfect for all leather surfaces and especially ideal for any that are perforated, cracked or have stitching
Restore softness: premium conditioners and aloe nourish leather for a soft, supple look and feel
Uv protection: Protection from UV exposure helps prevent premature aging, drying and fading
Take care of your Premium Italian Leather Miata Seats and they will take care of you.
|,|||-||TOWSTICKERS|,|NBACCESSORIES|,|Miata "Tow" Stickers |,|MC-SICKT|,|39.99|,|25.00|,||,||,|0.000 |,||,||,||,|Miata "Tow" Stickers
Designed specifically for the Miata, these tow stickers make it easy for e-crew to locate the required tow hook on your car.
Stickers come in a set of 2, and are orange with a white outline so they will stand out on any color car. 5 1/8" wide, 2 1/4" tall.
Made from 3M Contro Tac conformable vinyl, which has air release adhesive making them extremely user friendly and easy to install.
|,|||-||MI9IN2PANEKI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata 12" Inch 2 Pack Neon Kit|,|PSL-BLUE9INCH2PCNEONKIT|,|69.99|,|36.05|,||,||,|0.000 |,||,||,||,|Miata 12" Inch 2 Pack Neon Kit
Brand new BLUE neon interior 2pc KIT!!! LOOK NO FURTHER THIS IS THE BEST KIT ON THE INTERNET. THIS IS THE PERFECT KIT TO INSTALL UNDER YOUR DASH, SEATS, OR JUST ABOUT ANYWHERE IN YOUR VEHICLE. THIS IS THE BRIGHTEST AND MOST DURABLE KIT AND INCLUDES THE FOLLOWING: two 12" NEON TUBES.
1/2" TUBES MAKE THEM EASY TO HIDE TRANSFORMER. NEON TUBES ARE ENCLOSED IN A WATER RESISTANT HIGH IMPACT ACRYLIC TUBE. COMES WITH CIGARETTE LIGHTER ADAPTER (CAN ALSO BE HARD WIRED). THESE WILL WORK ON ANY FOREIGN OR DOMESTIC VEHICLE.
This is the uprgaded 2007 model, that stands out from all others. This is the kit that won all the awards at the National Import Auto Show in San Diego. FULL LIFETIME WARRANTY.
|,|||-||MI12NELI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata 12" Neon Light|,|PST-18INCHBLUESTICK|,|39.99|,|29.95|,||,||,|0.000 |,||,||,||,|Miata 12" Neon Light.
12" Straight Neon Light, easy to install. 12 Volt two wire hookup. Comes in Blue, Green, or Red.
Blue neon
Green Neon
Red Neon
|,|"Select Color" Blue Green Red|-||-|||-||MI8NELI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata 12" Neon Light|,|PSL-10INCHBLUENEON|,|28.99|,|19.95|,||,||,|0.000 |,||,||,||,|Miata 12" Neon Light.
12" Straight Neon Light. Easy to install. 12 Volt 2 wire hookup. Comes in blue, green, or red.
Blue neon
Green Neon
Red Neon
|,|"Select Color" Blue Green Red|-||-|||-||4BIGBRKIT90|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata 4-Wheel Big Brake Kit 1990-2005|,|GWR-444|,|1,699.99|,|1,597.95|,||,||,|25.000 |,||,||,||,|This is the New Rotor version of the best Miata brake setup available anywhere on the market. These 11" brakes will fit under almost any 15" wheel including the factory ones. This 4-wheel upgrade will give you well balanced braking, giving you maximum stopping power with no fade. The larger diameter rotors that are included will provide more breaking for any given pedal pressure and easier modulation. On top of it all, they're lighter than stock brakes!
This latest version is a result of years of feedback from customers and includes slotted rotors front and rear that are pre-assembled to the hats to make installation easy. This kit is designed and shipped by Goodwin Racing.
The Front end includes Wilwood Dynalite Forged 4 Piston Billet Aluminum Calipers mounted in a custom T6 bracket. Not only is caliper significantly lighter than stock, but it makes pad changes extremely easy...just one pin for pad changes! Perfect for running track pads all day, and then swapping them for street pads for the ride home. The calipers are matched with Stainless steel lines for a firm pedal. The standard Wilwood Q pads supplied with this kit for the front are ceramic compound for low dust and low noise yet have a temperature range up to 800 degrees!
The calipers are wrapped around a 2-piece rotor specifically designed for this application, made to very high standards which has a black coating on the non-friction surfaces to keep it looking good for years. (The two-piece rotors are 1.3 lbs. lighter per wheel than a single piece of similar size.)
The Rear end retains the stock calipers but they are relocated with T6 aluminum brackets to work the new larger two-piece 10.75" rotors. This relocation of the stock caliper retains the factory parking brake and keeps the costs down while adding significant additional thermal capacity without a weight gain. High-performance Porterfield R4S pads and stainless steel lines round out this package nicely. The rear rotors are non-ventilated versions of the fronts.
With four aluminum hats and four rotors (11" inch front & 10.75" Rear) fully assembled from Racing Brake, this kit has enough thermal capacity for any track Miata or street Miata! Kit includes a litre of high-quality DOT 4 brake fluid.
|,|"Please Select:" "90-93" "94-02 w/o Sport Package" "01-05 w/ Sport Package & MazdaSpeed"|-||-|"Shipping Cost" "add(+$49)"|-||-|||-||MI4PC7COMOLE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata 4pc 7 Color LED Kit with Remote Control|,|PSL-7COLORMOTOLED|,|159.99|,|79.95|,||,||,|0.000 |,||,||,||,| 4pc 7 Color LED Kit with Remote Control
Brand new 7 Color LED interior kit4PC KIT!!! LOOK NO FURTHER THIS IS THE BEST KIT ONTHIS IS THE PERFECT KIT TO INSTALL UNDER YOUR DASH, SEATS, OR JUST ABOUT ANYWHERE IN YOUR VEHICLE!!
THIS IS THE BRIGHTEST AND MOST DURABLE KIT ON THE INTERNET IT INCLUDES THE FOLLOWING:
* 7 COLOR CONTROL BOX, THAT DISPLAYS THE COLOR SHOWN, AS WELL AS AN OPTIONAL POWER SWITCH
* 64 PATTERNABILITY TO SHOW 1 COLOR AT A TIME
* 15 LEDs PER TUBE FOR A TOTAL OF 60 EXTRA BRIGHT LEDs
* Remote control
MADE TO FIT IN TIGHT SPACES EACH TUBE MEASURES 7" AND IS ONLY 1/2" THICK IN DIAMETER. ALL 4 TUBES ARE WATERPROOF, AND MADE OF A VERY DURABLE LEXAN THAT WILL NOT SHATTER. WIRELESS REMOTE CONTROL WITH 100' RANGE THAT WILL POWER ON AND CHANGE PATTERNS AS WELL AS COLORS ($39 VALUE).INSTALL KIT, SCREWS, WIRES, WARRANTY, ALL INCLUDED.
7 COLOR KIT FULL LIFETIME WARRANTY
|,|||-||RC-SM0037|,|19MAMISUANDS|,|Miata 90-97 Front, Rear Strut Mounting DS+PS fit both NA and NB|,|13-57915|,|86.50|,|69.95|,||,||,||,||,||,||,|Miata 90-97 Front, Rear Strut Mounting DS+PS fit both NA and NB
- Make:MAZDA
- Model:Miata MX-5
- Year:1990-1997
This is priced per Shock Mount.
If you need all 4, please change the qty. to 4 during your check out.
|,|||-||MI90SEINWH2B|,|NBACCESSORIES|,|Miata 9000 SERIES INTENSE WHITE BULBS (2001-2005) by PIAA|,|PIAA-10915|,|39.95|,|29.95|,||,||,|0.000 |,||,||,||,| Fits the 2001-2005 Mazda Miata MX-5
The Name Says it All! PIAA’s Intense White bulbs produce a more radiant white beam without any hint of blue. This bulb has been completely re-engineered from the ground up. What you’ll see in the 9005 (high beam) and 9006 (low beam) bulbs is a larger glass tube with a white top coat. The larger glass tube increases output (28% whiter color than STAR WHITE) and allows the bulb to burn at much cooler temperatures. PIAA’s new Intense White Bulbs provide the best possible balance between performance and bulb life.
Specs
* Bulb Type 9005
* Wattage 60w = 120w, 4100K
* Technology Intense White
* Bulb Type 9006
* Wattage 51w = 115w, 4100K
* Technology Intense White
For fog lights, use our PIAA H1 bulbs for years 2001-2003, and H11 bulbs for year 2004.
|,|"Select Quantity" "Single Pack" "Twin Pack add(+$25.00)|-||-|||-||23-10195|,|NBVIEWALL|,|Miata 9005 (HB3) Xtreme White Hybrid Twin Pack Halogen Bulbs (2001-2005) by PIAA|,|PIAA-23-10195|,|49.95|,|43.75|,||,||,||,||,||,||,|Miata 9005 (HB3) Xtreme White Hybrid Twin Pack Halogen Bulbs (2001-2005) by PIAA
Whiter and Brighter than stock bulbs. DOT compliance for worry free street legal operation. Up to 3900K color for increased depth perception and contrast. Best balance between performance and bulb life.
3900K-12V 60W
For fog lights, use our PIAA H1 bulbs for years 2001-2003, and H11 bulbs for year 2004.
|,|||-||MI90SESUPLGT|,|NBACCESSORIES|,|Miata 9005 / 9006 HB Solar Yellow Twin Pack Halogen Bulbs (2001-2005) by PIAA|,|PIAA-22-13495|,|59.95|,|48.29|,||,||,|0.000 |,||,||,||,|Miata 9005 / 9006 HB Solar Yellow Twin Pack Halogen Bulbs (2001-2004) by PIAA
Highest quality quartz glass and alloy filament for better performance and durability. Vivid-Coat Technology has far less light loss than standard coated bulbs. Cutting edge yellow output improves visibility in inclement weather. 2500K Yellow Color has significantly less glare than white light
Improves visibility in inclement weather
Specs
* 9005 / 9006 HB Solar Yellow Twin Pack Halogen Bulbs
* 2500K - 12V 55W
* Technology Super Plasma GT-X
For fog lights, use our PIAA H1 bulbs for years 2001-2003, and H11 bulbs for year 2004.
|,|||-||MI90SEXTWHPL|,|NBACCESSORIES|,|Miata 9005 XTreme White Plus (2001-2005) by PIAA|,|PIAA-19615|,|50.95|,|41.64|,||,||,|0.000 |,||,||,||,|Miata 9005 XTreme White Plus (2001-2005) by PIAA
The blue top coat on these bulbs add a slight blue tint to the lamp while still providing outstanding performance. PIAA offers the 9000 Series Xtreme White Plus in four distinct types – 9004, 9005, 9006 and 9007. Manufactured to SAE recommended specifications and DOT compliant. Only the 9005 (high beam) and 9006 (low beam) bulbs fit the Miata.
Specs:
* Bulb Type 9005 (HB3)
* Wattage 60w = 120w, 4000K
* Technology Xtreme White Plus with XTRA Technology
* Bulb Type 9006 (HB4)
* Wattage 51w = 115w, 4000K
* Technology Xtreme White Plus with XTRA Technology
For fog lights, use our PIAA H1 bulbs for years 2001-2003, and H11 bulbs for year 2004.
|,|"Select Quantity" "Select Here" "Single Pack (19015)" "Twin Pack add(+$27.95)"|-||-|||-||MICOACNEWWIC|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Miata AC Compressor 1990-1993|,|MAC-904-940|,|799.99|,|594.26|,||,||,|0.000 |,||,||,||,|Miata Compressor AC 1990-1993
Item number 2 in the picture
Note: Brand - After Market
|,|||-||MICOACNEWWIC1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Miata AC Compressor 1994-2004|,|MAC-904-941|,|799.99|,|594.26|,||,||,|0.000 |,||,||,||,|Miata Compressor AC 1994-2004
Item number 2 in the picture
Note: Brand - After Market
|,|||-||MIACDR193|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|Miata AC Drier 1999-2004|,|MAC-904-947|,|99.99|,|89.95|,||,||,|0.000 |,||,||,||,|Miata AC Drier 1999-2004
Item number 1 from the picture
Note: Brand - After Market
|,|||-||MIACHALEGRVI1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata ACME Hampton Leather Grain Vinyl Complete Door Panels 1990-1993|,|ACM-DPM1-HPT6508|,|689.99|,|448.02|,||,||,|0.000 |,||,||,||,|Miata ACME Hampton Leather Grain Vinyl Complete Door Panels 1990-1993
Whether you've already purchased our ACME seats or are planning on doing so, our new ACME door panels provide a beautiful finishing touch!
Available in all colors for the 1990-1993, these door panels are a vinyl and leather combination for ease on installation. They are solid without any cut outs, so you simply do the cutting for your speakers and door handles yourself, or simply have an auto upholstery shop install them.
The Miata ACME Hampton Leather Grain Vinyl Complete Door Panels includes fasteners and instructions.
Price is for the PAIR!
|,|"Select Top Rail Color" "Select Here" "HPT - 6508 Ebony Vinyl, All one color" "5197 Camel (Matches OEM Tan), All one color"|-||-|"Select Panel Color" "Select Here" "5197 Camel (Matches OEM Tan), All one color" "HPT - 6508 Ebony Vinyl, All one color"|-||-|||-||MIACHALEGRVI2|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata ACME Hampton Leather Grain Vinyl Complete Door Panels 1994-1995|,|ACM-DPM2-HPT6508|,|689.99|,|538.02|,||,||,|0.000 |,||,||,||,|Miata ACME Hampton Leather Grain Vinyl Complete Door Panels 1994-1995
Whether you've already purchased our ACME seats or are planning on doing so, our new ACME door panels provide a beautiful finishing touch!
Available in all colors for the 1994-1995, these door panels are a vinyl and leather combination for ease on installation. They are solid without any cut outs, so you simply do the cutting for your speakers and door handles yourself, or simply have an auto upholstery shop install them.
The Miata ACME Hampton Leather Grain Vinyl Complete Door Panels includes fasteners and instructions.
Price is for the PAIR!
|,|"Select Top Rail Color" "Select Here" "HPT - 6508 Ebony Vinyl, All one color" "5197 Camel (Matches OEM Tan), All one color"|-||-|"Select Panel Color" "Select Here" "5197 Camel (Matches OEM Tan), All one color" "HPT - 6508 Ebony Vinyl, All one color"|-||-|||-||MIACHALEGRVI3|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata ACME Hampton Leather Grain Vinyl Complete Door Panels 1996-1997|,|ACM-DPM3-HPT6508|,|749.99|,|598.02|,||,||,|0.000 |,||,||,||,|Miata ACME Hampton Leather Grain Vinyl Complete Door Panels 1996-1997
Whether you've already purchased our ACME seats or are planning on doing so, our new ACME door panels provide a beautiful finishing touch!
Available in all colors for the 1996, 1997. These door panels are a vinyl and leather combination for ease on installation. They are solid without any cut outs, so you simply do the cutting for your speakers and door handles yourself, or simply have an auto upholstery shop install them.
The Miata ACME Hampton Leather Grain Vinyl Complete Door Panels includes fasteners and instructions.
Price is for the PAIR!
|,|"Select Top Rail Color" "Select Here" "HPT - 6508 Ebony Vinyl, All one color" "5197 Camel (Matches OEM Tan), All one color"|-||-|"Select Panel Color" "Select Here" "5197 Camel (Matches OEM Tan), All one color" "HPT - 6508 Ebony Vinyl, All one color"|-||-|||-||MIACHE19|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata ACME Headliner 1990-1997|,|ACM-ACH-60|,|399.99|,|199.95|,||,||,|0.000 |,||,||,||,|
Miata MX-5 Miata headliner for years 1990, 1991, 1992, 1993, 1994, 1995, 1996, and 1997.
This is a retro-fit, non-original headliner.
|,|"Select Color" "7769V BLACK" "P775E SANDSTONE" "9816V DK GREY" "8770N-1 SAPPHIRE" "N997 MAROON"|-||-|||-||MIACHE191|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Miata ACME Headliner 1999-2002|,|ACM-ACH-61|,|399.99|,|199.95|,||,||,|0.000 |,||,||,||,|
Miata MX-5 Miata headliner for years 1999, 2000, 2001 and 2002.
This is a retro-fit, non-original headliner.
|,|"Select Color" "7769V BLACK" "P775E SANDSTONE" "9816V DK GREY" "8770N-1 SAPPHIRE" "N997 MAROON"|-||-|||-||MIACLESEUP191|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 1990-1992 Front Buckets with Headrest Speakers - SALE! |,|ACM-U901PL|,|999.99|,|809.02|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Leather Seat Upholstery 1990-1992 Front Buckets with Headrest Speakers
Front Leather Seats for the Mazda MX-5 Miata years 1990, 1992, and 1992.
Front Buckets - For Model with speakers in head rests - Leather. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|"Perforated Inserts?" "Select Here" "No" "Yes add(+$115)"|-||-|||-||MIACLESEUP19|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 1990-1992 Front Buckets WITHOUT Headrest Speakers - SALE! |,|ACM-U901L|,|999.99|,|804.01|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Leather Seat Upholstery 1990-1992 Front Buckets With Out Headrest Speakers
Front Leather Seats for the Mazda MX-5 Miata years 1990, 1992, and 1992.
Front Buckets - For Model without speakers in head rests - Leather. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|"Perforated Inserts?" "Select Here" "No" "Yes add(+$115)"|-||-|||-||MIACLESEUP193|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 1993-1995 Front Buckets with Headrest Speakers Perforated - SALE! |,|ACM-U902PL|,|999.99|,|806.01|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Leather Seat Upholstery 1993-1995 Front Buckets with Headrest Speakers Perforated
Front Leather Seats for the Mazda MX-5 Miata years 1993, 1994, and 1995.
Front Buckets - For Model with speakers in head rests - Leather. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|"Perforated Inserts?" "Select Here" "No" "Yes add(+$115)"|-||-|||-||MIACLESEUP192|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 1993-1995 Front Buckets WITHOUT Headrest Speakers - SALE! |,|ACM-U902L|,|999.99|,|796.01|,||,||,|5.000 |,||,||,||,|MIATA ACME Leather Seat Upholstery 1993-1995 Front Buckets With Out Headrest Speakers
Front Leather Seats for the Mazda MX-5 Miata years 1993, 1994, and 1995.
Front Buckets - For Model without speakers in head rests - Leather. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|"Perforated Inserts?" "Select Here" "No" "Yes add(+$115)"|-||-|||-||MIACLESEUP195|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 1996-1997 Front Buckets with Headrest Speakers Perforated - SALE! |,|ACM-U903PL|,|999.99|,|815.01|,||,||,|5.000 |,||,||,||,|MIATA ACME Leather Seat Upholstery 1996-1997 Front Buckets with Headrest Speakers Perforated
Front Leather Seats for the Mazda MX-5 Miata years 1996 and 1997.
Front Buckets - For Model with speakers in head rests - Leather. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|"Perforated Inserts?" "Select Here" "No" "Yes add(+$115)"|-||-|"Shipping and Handling Fee" "add(+$79.95)|-||-|||-||MIACLESEUP194|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 1996-1997 Front Buckets WITHOUT Headrest Speakers - SALE! |,|ACM-U903L|,|999.99|,|815.01|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Leather Seat Upholstery 1996-1997 Front Buckets w/o Headrest Speakers
Front Leather Seats for the Mazda MX-5 Miata years 1996 and 1997.
Front Buckets - For Model without speakers in head rests - Leather. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|"Perforated Inserts?" "Select Here" "No" "Yes add(+$115)"|-||-|"Shipping and Handling Fee" "add(+$79.95)|-||-|||-||MIACLESEUP196|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 1999-2000 Front Buckets with Headrest Speakers Perforated - SALE! |,|ACM-U904PL|,|999.99|,|818.01|,||,||,|5.000 |,||,||,||,|MIATA ACME Leather Seat Upholstery 1999-2000 Front Buckets with Headrest Speakers Perforated - SALE!
Front Leather Seats for the Mazda MX-5 Miata years 1999 and 2000.
Front Buckets - For Model with speakers in head rests - Leather. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|
"Perforated Inserts?" "Select Here" "No" "Yes add(+$115)"|-||-|||-||MIACLESEUP197|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 1999-2000 Front Buckets WITHOUT Headrest Speakers - SALE! |,|ACM-U904L|,|999.99|,|818.01|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Leather Seat Upholstery 1999-2000 Front Buckets With Out Headrest Speakers
Front Leather Seats for the Mazda MX-5 Miata years 1999 and 2000.
Front Buckets - For Model without speakers in head rests - Leather. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|"Perforated Inserts?" "Select Here" "No" "Yes add(+$115)"|-||-|||-||MIACLESEUP20|,|SHOP-BY-SALE|,|MIATA ACME Leather Seat Upholstery 2001-2005 Front Buckets with Preforated Inserts - SALE! |,|ACM-U905L|,|1,099.99|,|818.01|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Leather Seat Upholstery 2001-2005 Front Buckets
Front Leather Seats for the Mazda MX-5 Miata years 2001, 2002, 2003, 2004 and 2005.
Front Buckets - includes perforated inserts like the original. Leather Seating Area with Matching Vinyl Sides and Back.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Charcoal (AC842)" "Beechwood (DUM716)" "Black (F2006)" "Dark Red (RE1086)" "Smoke (RE630)"|-||-|||-||MIACRARASA|,|SOFT-TOP|,|Miata Acme Rain Rail 1990-2005 |,|ACM-C-700R|,|232.00|,|149.95|,||,||,|0.000 |,||,||,||,|This is the plastic "rain gutter" type piece that every Miata already has. It is located behind the top (you can't see it until you remove the top) and funnels the water that runs down between the top and the body of the car to drainage holes. If this piece is cracked or brittle, serious water damage can occur in your Miata.
|,|||-||MIACSEUP19FR|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery 1990-1992 Front Buckets WITHOUT Headrest Speakers - SALE! |,|ACM-U901-HPT6508|,|599.99|,|418.02|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Seat Upholstery 1990-1992 Front Buckets With Out Headrest Speakers
For the Mazda MX-5 Miata seats for years 1990, 1991, and 1992.
Front Buckets - For Model without speakers in head rests.
Hampton Leather Grain Vinyl Or Sierra Grain Vinyl - No Seat Belt Cut Outs.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HPT-6508)" "Saddle (HPT-6962)" "Med Opal (HPT-6687)" "Camel (Matches OEM Tan - 5197)" " " "Black Encore Velour Insert (P667)" "Sandstone Encore Velour Insert (P775E)" "Charcoal Encore Velour Insert (X161)"|-||-|||-||MIACVISEUP193|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery 1993-1995 Front Buckets with Headrest Speakers Perforated - SALE! |,|ACM-U902P-HAP6508|,|599.99|,|424.02|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Vinyl Seat Upholstery 1993-1995 Front Buckets with Headrest Speakers Perforated
For the Mazda MX-5 Miata seats for years 1993, 1994, and 1995.
Front Buckets - For Model with speakers in head rests. Hampton Leather Grain Vinyl- with Seat Belt Cut Outs.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HPT6508)" "Saddle (HPT6962)" "Medium Opal (HPT6687)"|-||-|||-||MIACVISEUP197|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery 1996-1997 Front Buckets with Headrest Speakers Perforated - SALE! |,|ACM-U903P-HPT6508|,|599.99|,|424.02|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Vinyl Seat Upholstery 1996-1997 Front Buckets with Headrest Speakers Perforated
For the mazda mx-5 miata seats for years 1996 and 1997.
Front buckets - for model with speakers in head rests. Hampton leather grain vinyl or sierra leather grain vinyl.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HPT6508)" "Saddle (HPT6962)" "Medium Opal (HPT6687)"|-||-|||-||MIACVISEUP195|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery 1996-1997 Front Buckets WITHOUT Headrest Speakers - SALE! |,|ACM-U903-HPT6508|,|599.99|,|424.02|,||,||,|5.000 |,||,||,||,|MIATA ACME Vinyl Seat Upholstery 1996-1997 Front Buckets With Out Headrest Speakers
For the Mazda MX-5 Miata seats for years 1996, and 1997.
Front Buckets - For Model without speakers in head rests.
Hampton Leather Grain Vinyl Or Sierra Grain Vinyl.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HPT-6508)" "Saddle (HPT-6962)" "Med Opal (HPT-6687)" "Camel (Matches OEM Tan - 5197)" " " "Black Encore Velour Insert (P667)" "Sandstone Encore Velour Insert (P775E)" "Charcoal Encore Velour Insert (X161)"|-||-|||-||MIACVISEUP198|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery 1999-2000 Front Buckets with Headrest Speakers Perforated - SALE! |,|ACM-U904P-HPT6508|,|599.99|,|428.01|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Vinyl Seat Upholstery 1999-2000 Front Buckets with Headrest Speakers Perforated
For the Mazda MX-5 Miata seats for years 1999 and 2000.
Front buckets - for model with speakers in head rests. Hampton leather grain vinyl or sierra leather grain vinyl.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HPT6508)" "Saddle (HPT6962)" "Med Opal (HPT6687)"|-||-|||-||MIACVISEUP199|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery 1999-2000 Front Buckets WITHOUT Headrest Speakers - SALE! |,|ACM-U904-HPT6508|,|599.99|,|428.01|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Vinyl Seat Upholstery 1999-2000 Front Buckets With Out Headrest Speakers
For the Mazda MX-5 Miata seats for years 1999 and 2000.
Front Buckets - For Model without speakers in head rests.
Hampton Leather Grain Vinyl Or Sierra Grain Vinyl.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HPT-6508)" "Saddle (HPT-6962)" "Med Opal (HPT-6687)" "Camel (Matches OEM Tan - 5197)" " " "Black Encore Velour Insert (P667)" "Sandstone Encore Velour Insert (P775E)" "Charcoal Encore Velour Insert (X161)"|-||-|||-||MIACVISEUP20|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery 2001-2005 Front Buckets with Preforated Inserts - SALE! |,|ACM-U905-HAP6508|,|599.99|,|498.02|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Vinyl Seat Upholstery 2001-2005 Front Buckets with Preforated Inserts
For the Mazda MX-5 Miata seats for years 2001, 2002, 2003, 2004, and 2005.
Front Buckets - Perf insert with same color non-perf on the outside. Hampton Leather Grain Vinyl Or Sierra Grain Vinyl.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HAP6508)" "Saddle (HAP6962)" "Med Opal (HAP6687)"|-||-|||-||MIACVISEUP19|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery, 1990-1992 Front Buckets with Headrest Speakers Perforated - SALE! |,|ACM-U901P-HPT6508|,|599.99|,|418.02|,||,||,|5.000 |,||,||,||,|Mazda Miata ACME Vinyl Seat Upholstery, 1990-1992 Front Buckets with Headrest Speakers Perforated
For the Mazda MX-5 Miata seats for years 1990, 1991, and 1992.
Front Buckets - For Model with speakers in head rests. Hampton Leather Grain Vinyl- No Seat Belt Cut Outs.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HPT6508)" "Saddle (HPT6962)" "Med Opal (HPT6687)"|-||-|||-||MIACVISEUP192|,|SHOP-BY-SALE|,|MIATA ACME Vinyl Seat Upholstery, 1993-1995 Front Buckets WITHOUT Headrest Speakers - SALE! |,|ACM-U902-HPT6508|,|599.99|,|424.01|,||,||,|5.000 |,||,||,||,|MIATA ACME Vinyl Seat Upholstery, 1993-1995 Front Buckets With Out Headrest Speakers
For the Mazda MX-5 Miata seats for years 1993, 1994, and 1995.
Front Buckets - For Model without speakers in head rests. Hampton Leather Grain Vinyl - with Seat Belt Cut Outs.
These Custom Made to Order ACME Vinyl Seat Upholstery are Priced for the PAIR!
|,|"Select Color" "Select Here" "Black (HPT-6508)" "Saddle (HPT-6962)" "Med Opal (HPT-6687)" "Camel (Matches OEM Tan - 5197)" " " "Black Encore Velour Insert (P667)" "Sandstone Encore Velour Insert (P775E)" "Charcoal Encore Velour Insert (X161)"|-||-|||-||MIARPADFORIC|,|NADASHBOARD|,|Miata Armrest Pad for I.L. Center Console 1990-1997|,|RS-NA0060126X|,|84.99|,|69.98|,||,||,|0.000 |,||,||,||,|Miata Armrest Pad for I.L. Center Console 1990-1997
The armrest should be mounted to our new Miata I.L. Motorsport Center Console NA (1990-1997).
The rubber assures a comfortable ride in your car. This soft inlay is specially designed for the center console.
|,|||-||MAZDA-MX-5-MIATA-AUDIO-VIDEO-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA AUDIO & VIDEO|,||,||,||,|MAZDA MX-5 MIATA AUDIO, VIDEO PARTS AND ACCESSORIES
|,||,||,||,||,|19mamiauvivi 19mamiauvisp 19mamiauvina 19mamiauviac 19mamiauvian 19mamiauvida
|,||,|||-||MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA AUDIO & VIDEO|,||,||,||,|MAZDA MX-5 MIATA AUDIO, VIDEO PARTS AND ACCESSORIES|,||,||,||,||,|19mamxmiauvi 19mamiauvisp1 19mamiauvina1 19mamiauviac1 19mamiauvian1 19mamiauvida1
|,|
|,|||-||MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA AUDIO & VIDEO|,||,||,||,|MAZDA MX-5 MIATA AUDIO, VIDEO PARTS AND ACCESSORIES
|,||,||,||,||,|20mamxmiauvi 20mamiauvisp 20mamiauvina 20mamiauviac 20mamiauvian 20mamiauvida
|,||,|||-||MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA AUDIO & VIDEO|,||,||,||,|MAZDA MX-5 MIATA AUDIO, VIDEO PARTS AND ACCESSORIES
|,||,||,||,||,|20mamxmiauvi 20mamiauvisp 20mamiauvina 20mamiauviac 20mamiauvian 20mamiauvida
|,||,|||-||MAZDA-MX-5-MIATA-BATTERY-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA BATTERY|,||,||,||,|MAZDA MX-5 MIATA BATTERY, PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-BATTERY-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA BATTERY|,||,||,||,|MAZDA MX-5 MIATA BATTERY, PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-BATTERY-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA BATTERY|,||,||,||,|MAZDA MX-5 MIATA BATTERY, PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|MAZDA MX-5 MIATA BATTERY, PARTS AND ACCESSORIES|-||-|||-||MAZDA-MX-5-MIATA-BATTERY-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA BATTERY |,||,||,||,|MAZDA MX-5 MIATA BATTERY, PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||BEFRSTTOBR|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Miata BeatRush Front Strut Tower Brace 2006-2015|,|GG-S85084-FTA|,|419.99|,|389.98|,||,||,|0.000 |,||,||,||,|Miata BeatRush Front Strut Tower Brace
Detailed Description:
This product unites the strut towers and creates a balance between the shocks; preventing the shocks from independently moving and causing small changes in suspension geometry. Overall better handling will be felt during cornering.
Even the most powerful car can not perform well at a high level without sufficient body rigidity. The Beatrush Strut Brace enhances the body rigidity and inhibits warping, which makes the suspension movement smooth.
• Fits all 06+ Mazda Miata MX-5 (NCEC).
• Light Weight, Strong, and Rigid
• Made of Aluminum
• Improves front struts by giving the chassis more rigidity, resulting in better handling
• Best fitment with smaller aftermarket battery
• Track tested for functionality
For Mazda Miata Years: 2006-2015
|,|"Select Year" "Select Here" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)"|-||-|||-||BEPEBAR19|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Beatrush Performance Bar 1999-2005|,|GG-S85083PPF|,|229.99|,|198.05|,||,||,|0.000 |,||,||,||,|Miata Beatrush Performance Bar
Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush PerformanceBar restrains suspension links and other installation points to enhance rigidity, which make the suspension movement smooth and enhances steering response as well as traction.
For Mazda Miata Years: 1999, 2000, 2001, 2002, 2003, 2004, and 2005
|,|||-||BEREPPEBAR20|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Miata BeatRush Rear P.P.F. Performance Bar 2006-2008|,|GG-S85084PPF|,|299.99|,|249.05|,||,||,|0.000 |,||,||,||,|Detailed Description:
For 2006-2008 Mazda Miata
Even the most powerful car can not perform at a high level without sufficient body rigidity. The Beatrush PerformanceBar restrains suspension links and other installation points to enhance rigidity, which make the suspension movement smooth and enhances steering response as well as traction.
|,|||-||MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA BRAKES & ROTORS|,||,||,||,|MAZDA MX-5 MIATA BRAKES, ROTORS, PADS, AND HOSES
|,||,||,||,||,|19mamibrrovi1 19mamibrropa1 19mamibrroro1 19mamibrrobr1 19mamibrroac1 19mamibrrore1
|,||,|||-||MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA BRAKES & ROTORS|,||,||,||,|MAZDA MX-5 MIATA BRAKES, ROTORS, PADS, AND HOSES
|,||,||,||,||,|19mamibrrovi 19mamibrropa 19mamibrroro 19mamibrrobr 19mamibrroac 19mamibrrore
|,||,|||-||MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA BRAKES & ROTORS|,||,||,||,|MAZDA MX-5 MIATA BRAKES, ROTORS, PADS, AND HOSES
|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA BRAKES & ROTORS|,||,||,||,|MAZDA MX-5 MIATA BRAKES, ROTORS, PADS, AND HOSES
|,||,||,||,||,|20mamibrrovi 20mamibrropa 20mamibrroro 20mamibrrobr 20mamibrroac 20mamibrrore
|,||,|||-||PARTS---PERFORMANCE-BRAKES---ROTORS-1990-1993|,|PARTS---PERFORMANCE-BRAKES---ROTORS|,|MIATA BRAKES & ROTORS (1990-1993)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-BRAKES---ROTORS-1994-2005|,|PARTS---PERFORMANCE-BRAKES---ROTORS|,|MIATA BRAKES & ROTORS (1994-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-BRAKES---ROTORS-2006-2009|,|PARTS---PERFORMANCE-BRAKES---ROTORS|,|MIATA BRAKES & ROTORS (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||BRRO19|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|MIATA BRAKES & ROTORS 1990-1993|,||,||,||,||,||,||,||,||,||,||,|||-||BRRO191|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|MIATA BRAKES & ROTORS 1994-1997|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-CAR-COVER-CARE-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA CAR COVER & CARE|,||,||,||,|MAZDA MX-5 MIATA COVER, CAR CARE PARTS AND ACCESSORIES
|,||,||,||,||,|micarcashvia accessories books1 carcovers carcare battery
|,||,|||-||MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA CAR COVER & CARE|,||,||,||,|MAZDA MX-5 MIATA COVER, CAR CARE PARTS AND ACCESSORIES
|,||,||,||,||,|20mamicarcas 20mamicarcas1 20mamicarcas2 20mamicarcas3 20mamicarcas4 20mamicarcas5
|,||,|||-||MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA CAR COVER & CARE|,||,||,||,|MAZDA MX-5 MIATA COVER, CAR CARE PARTS AND ACCESSORIES
|,||,||,||,||,|20mamicarcas 20mamicarcas1 20mamicarcas2 20mamicarcas3 20mamicarcas4 20mamicarcas5
|,||,|||-||MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA CAR COVER & CARE|,||,||,||,|MAZDA MX-5 MIATA COVER, CAR CARE PARTS AND ACCESSORIES
|,||,||,||,||,|19mamicarcas 19mamicarcas1 19mamicarcas2 19mamicarcas3 19mamicarcac 19mamicarcas4
|,||,|||-||MICARCOCOCUF1|,|20MAMICARCAS|,|Miata Car Cover Covercraft Custom Fit Cockpit 2006-2024|,|CVR-IC2024PD|,|135.99|,|89.95|,||,||,|0.000 |,||,||,||,|Miata Car Cover Covercraft Custom Fit Cockpit 2006-2020
Easy to use protection for your Miata when the top is down.
Cockpit covers protect the windshield and interior from ultraviolet sun rays, airborne pollutants and droppings from trees and birds. This material is also water resistant to protect against dew and light rain.
Easy to install!
Fits all years except MazdaSpeed Miata. Also, does not fit with roll bars, soft top up, or hard top on.
(Picture is of a NB Miata)
|,|"Select Year" "Select Here" "2006-2015" "2016-2024"|-||-|||-||COVERCRAFT-POLY|,|CLEARANCE|,|Miata Car Cover Covercraft Custom Fit POLYCOTTON *FREE SHIPPING*|,|covercraft-poly|,|249.90|,|188.02|,||,||,||,||,||,||,|Miata Car Cover Covercraft Custom Fit POLYCOTTON
Lightweight sun protection. Durable, woven polycotton blend offers good basic vehicle protection. Polyester is sun and water resistant, while cotton gives a soft touch to the vehicle's finish.
- Good basic indoor protection
- Drill weave polycotton blend
- Resists tears and punctures
- Treated to resist rot and mildew
|,|"Select Years" "Select Here" "1990-1997 w/o Spoiler" "1990-1997 with Spoiler add(+$35)" "1999-2005 add(+$25)" "2006-2015 with Softtop add(+$25)" "2006-2015 with Hardtop add(+$25)" "2016-2017 w/ Antenna Pocket add(+$45)" "2017-2021 RF 2dr w/ Antenna Pocket add(+$45)"|-||-|||-||COVERCRAFT-REFLECTECT|,|CLEARANCE|,|Miata Car Cover Covercraft Custom Fit REFLECTECT *FREE SHIPPING*|,|Covercraft-Reflectect|,|279.95|,|198.02|,||,||,||,||,||,||,|Miata Car Cover Covercraft Custom Fit REFLECTECT
Reflect damaging UV rays away while keeping your vehicle cooler. All-weather protection with a compact design.
Custom-Fit Reflectect® Car Covers provide great all-weather protection but are ideal for sunny climates. The reflective nature helps protect your vehicles finish from harmful UV rays while also keeping your vehicle cooler.
The Reflectect® Vehicle Covers are made from a silver urethane coated polyester fabric with a UV-reflective silver-colored finish. Not only will these custom car covers keep your vehicle cooler, but they are water-resistant and designed to repel dust and dirt to keep your vehicle clean. The light-weight design allows for easy installation and compact trunk storage.
Covercraft Reflectect® Car Covers are going to be custom-fit to your exact car, truck, SUV, or van. Each custom car cover will have built-in urethane elastic that is sewn into the front and rear hems for easy installation. At the bottom of the cover, there will be reinforced non-scratch grommets to protect your paint. Since 1965 Covercraft has been the leader in Vehicle Covers. If you don't see a custom pattern available or you modified your vehicle give us a call we can cover any vehicle with wheels!
|,|"Select Years" "Select Here" "1990-1997 w/o Spoiler" "1990-1997 with Spoiler add(+$45)" "1999-2005 add(+$25)" "2006-2015 with Softtop add(+$25)" "2006-2015 with Hardtop add(+$25)" "2016-2017 w/ Antenna Pocket add(+$55)" "2017-2021 RF 2dr w/ Antenna Pocket add(+$55)"|-||-|||-||COVERCRAFT-SUNBRELLA|,|CLEARANCE|,|Miata Car Cover Covercraft Custom Fit SUNBRELLA *FREE SHIPPING* |,|covercraft-sunbrella|,|478.00|,|398.02|,||,||,||,||,||,||,|Miata Car Cover Covercraft Custom Fit Sunbrella
Thanks to its unique construction process, a Sunbrella® car cover provides protection and years of service in intense sun climates like Arizona and other areas of the Sunbelt, where UV rays can rapidly degrade the paint and interior. Because of the use of acrylic fibers, which are naturally UV resistant, Sunbrella® has long been the recognized leader in long-wearing marine fabrics for bimini tops, sail covers and deck enclosures. Eco Conservation Friendly - We protect your vehicle and your selection of this fabric helps to protect our environment! Sunbrella® uses a superior fade resistant solution-dye production process that SAVES 1,000 gallons of water for every 1,000 yards of fabric produced.
- Best for sun environments
- Exceptionally strong
- Rot and mildew resistant
- Outdoor or Indoor Use
- Choose from 3 colors
- High performance woven fabric
- Fade resistant
|,|"Select Years" "Select Here" "1990-1997 w/o Spoiler" "1990-1997 with Spoiler add(+$45)" "1999-2005 add(+$25)" "2006-2015 with Softtop add(+$25)" "2006-2015 with Hardtop add(+$25)" "2016-2017 w/ Antenna Pocket add(+$55)" "2017-2021 RF 2dr w/ Antenna Pocket add(+$55)"|-||-|
"Select Color" "Select Here" "Gray-D4" "Toast-D6" "Pacific Blue-D1"|-||-|||-||COVERCRAFT-ULTRA|,|CLEARANCE|,|Miata Car Cover Covercraft Custom Fit ULTRATECT *FREE SHIPPING* |,|covercraft-ultra|,|345.95|,|262.02|,||,||,||,||,||,||,|Miata Car Cover Covercraft Custom Fit ULTRATECT
Durable Outdoor Protection - A high-performance fabric at a moderate price - easy to use, easy to clean, great UV resistance, good breathability, fade resistant. Ultra'tect is made from a solution-dye WeatherMax®SL fabric. A reasonably priced cover that will retain its color and strength in extended outdoor exposure, while providing a high degree of water resistance and UV protection. Developed in partnership with Safety Components Fabric Technologies (SCFTI), a U.S. textile firm and leader in woven fabric technology with roots going back over 100 years. Eco Conservation Friendly - We protect your vehicle and your selection of this fabric helps to protect our environment! Ultra'tect® uses a superior fade resistant solution-dye production process that SAVES 1,000 gallons of water for every 1,000 yards of fabric produced.
- Superior shape retention
- Outdoor or Indoor Use
- Choose from 4 colors
- High performance woven fabric
- Face resistant: each fiber is a solid color, NOT surface dyed
- Strong fabric: double 150 denier yarns woven in both the machine and cross direction
- Luxurious soft finish glides over the vehicle finish
- HydroMax finish on both sides of the fabric helps protect against rain, bird droppings and dust, while maintaining the fabric's breathability
- Excellent UV protection: ideal for use in areas subject to prolonged sun exposure
|,|"Select Years" "Select Here" "1990-1997 w/o Spoiler" "1990-1997 with Spoiler add(+$35)" "1999-2005 add(+$25)" "2006-2015 with Softtop add(+$25)" "2006-2015 with Hardtop add(+$25)" "2016-2017 w/ Antenna Pocket add(+$45)" "2017-2021 RF 2dr w/ Antenna Pocket add(+$45)"|-||-|"Select Color" "Select Here" "Gray-UG" "Blue-UL" "Black-UB" "Tan-UT"|-||-|||-||COVERCRAFT-WEATHER2|,|CLEARANCE|,|Miata Car Cover Covercraft Custom Fit WeatherShield HD - Gray *FREE SHIPPING*|,|covercraft-HD|,|495.95|,|412.02|,||,||,||,||,||,||,|Miata Car Cover Covercraft Custom Fit WeatherShield HD - Gray
Developed primarily for intense sun environments and long-term storage, WeatherShield® HD uses heavier denier thread for maximum UV opacity. Approximately 40% heavier than WeatherShield® HP, the 300 denier fiber construction results in almost double the tear and tensile strength, finished with the same great EPIC® by Nextec encapsulation process.
Who should use WeatherShield® HD? People who live in intense sun climates and along the coast will benefit most from this extreme-performance fabric, as well as RV owners seeking the best cover for long-term storage.
WeatherShield® HD is not as compact as WeatherShield® HP and the heavier fibers aren't as silky-smooth but, for maximum performance in harsh environments, you can't beat WeatherShield® HD.
WeatherShield® HD uses a superior fade resistant solution-dye production process that SAVES 1,000 gallons of water for every 1,000 yards of fabric produced
|,|"Select Years" "Select Here" "1990-1997 w/o Spoiler" "1990-1997 with Spoiler add(+$45)" "1999-2005 add(+$25)" "2006-2015 with Softtop add(+$25)" "2006-2015 with Hardtop add(+$25)" "2016-2017 w/ Antenna Pocket add(+$45)" "2017-2021 RF 2dr w/ Antenna Pocket add(+$45)"|-||-|||-||COVWEATCARCO|,|CLEARANCE|,|Miata Car Cover Covercraft Custom Fit WeatherShield HP - BEST! *FREE SHIPPING*|,|808-104|,|448.95|,|349.58|,||,||,|0.000 |,||,|afa|,||,|Miata Car Cover Covercraft Custom Fit WeatherShield HP - BEST!
If you want the Ultimate in Protection for your Miata, the WeatherShield is the way to go.
This ULTRATHIN cover provides your Miata with fantastic protection against rain, snow, dust, UV rays AND folds up into a very small package! Also, this is the only cover that can be washed in a home washer and dryer...no dry cleaning needed.
Truly, the best of both worlds.
Why WeatherShield HP?
Over 25 years ago Covercraft partnered with Nextec Applications, Inc., a technology leader that pioneered a new process for creating performance fabrics used primarily in the outdoor clothing industry.
By using precise polymer placement and special chemistries, they were able to place protective finishes inside the fabric, encapsulating the actual woven fibers to transform ordinary fabric into extra-ordinary! The encapsulation processes, methods and equipment are protected by more than 51 patents issued or pending in the U.S. and internationally.
Working with Nextec's extensive R&D resources Covercraft created what is considered the perfect fabric for outdoor or indoor vehicle protection. EPIC® by Nextec's encapsulation process delivers all weather protection, compact packability, easy care, and a soft-to-paint touch without sacrificing breathability.
|,|"Select Years" "Select Here" "1990-1997 w/o Spoiler" "1990-1997 with Spoiler add(+$45)" "1999-2005 add(+$25)" "2006-2015 with Softtop add(+$25)" "2006-2015 with Hardtop add(+$25)" "2016-2017 w/ Antenna Pocket add(+$55)" "2017-2021 RF 2dr w/ Antenna Pocket add(+$55)"|-||-|"Select Color" "Select Here" "Gray-PG" "Taupe-PT" "Black-PB add(+$32)" "Bright Blue-PA add(+$35)" "Red-PR add(+$32)"|-||-|||-||COVER-FORM-FIT|,|CLEARANCE|,|Miata Car Cover Covercraft Custom FORM-FIT *FREE SHIPPING* |,|cover-form-fit|,|499.95|,|329.02|,||,||,||,||,||,||,|Miata Car Cover Covercraft Custom Form-Fit
Our Most LUXURIOUS Indoor Cover...Fits like a glove and the sheared cotton fleece on the inside is the softest finish you can put on a vehicle for indoor storage. Designed for cars that are not daily drivers, Covercraft's Form-Fit® car covers provide a body-hugging fit and a super soft inside to pamper fine paint finishes. We start with an outer shell of woven knit polyester that has Lycra/Spandex® added to the yarns to provide stretch and memory – the stretch provides the body-hugging fit and the memory assures the cover will retain its shape over an extended period of time.
- A Covercraft Exclusive that is the most luxurious indoor cover available
- Polyester knit with spandex added to the yarns
- Special Stretch Fabric Follows Vehicle Contours
- Inside is 100% Cotton Sheared to a Fleece Finish
- Available in 6 colors
- High performance indoor fabric
- Super soft fabric pampers the paint, the chrome, anything the fabric touches!
- Highly breathable fabric prevents vapor and heat from becoming trapped under the cover
- Ding and dent protection: Fabric construction helps provide protection from minor garage "accidents"
- Machine washable - the best car cover is a clean cover, and this cover is easy maintain in most front load washer/dryers
|,|"Select Years" "Select Here" "1990-1997 w/o Spoiler" "1990-1997 with Spoiler add(+$55)" "1999-2005 add(+$25)" "2006-2015 with Softtop add(+$25)" "2006-2015 with Hardtop add(+$25)" "2016-2017 w/ Antenna Pocket add(+$75)" "2017-2021 RF 2dr w/ Antenna Pocket add(+$75)"|-||-|"Select Color" "Select Here" "Black-FB" "Charcoal Gray-FC" "Metallic Dark Blue-FD" "Silver Gray-FG" "Hunter Green-FN" "Bright Red-FR"|-||-|||-||MICHSHSU19PL|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata Chrome Shifter surround 1990-1998 plate w/ boot|,|916-200|,|149.99|,|124.90|,||,||,|0.000 |,||,||,||,|This is a special shifter plate with leatherbag for all Mazda Miata MX-5 type NA from 1989 up to 1998. No drilling required, it is easy to install for everyone. The leather bag is matches the shifterplate perfectly, and is only available in black. But you can use any other shiftbags on this system. Comes complete with all you need for an easy installation.
|,|||-||MICLFL2|,||,|MIATA CLUTCHES & FLYWHEELS|,||,||,||,||,||,||,||,||,||,||,|||-||MICLFL1|,||,|MIATA CLUTCHES & FLYWHEELS|,||,||,||,||,||,||,||,||,||,||,|||-||MICOSTSTMU1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Cobalt Stainless Steel Muffler (1999-2005)|,|CBT-900-566|,|379.99|,|349.02|,||,||,|10.000 |,||,||,||,|Miata Cobalt Stainless Steel Muffler (1999-2005)
Now offering your Mazda Miata one of the finest Sport Mufflers in the market today! Custom built for the 1999-2005 NB models, Cobalt's beautiful polished stainless muffler boasts an extensive set of features along with a redesigned inlet pipe to give smoother air flow. This high quality muffler gives off a sporty exhaust note and has a mirror polish that shines like chrome. A great addition to your car, get this perfect piece of eye candy for your favorite Roadster at a truly affordable price!
Features:
- 304 Stainless steel construction
- Muffler packing is a combination of stainless steel wool and fiberglass for a perfect sports car sound that is never intrusive
- CNC cut Stainless steel flanges
- 2.5" Pipe diameter
- Beautifully shaped oval Muffler
- All welds on muffler are ground smooth and polished
- Entire muffler completely polished to a mirror shine
- Sporty 3.5" insulated polished muffler tip
- Gasket included
- 5 Year Warranty*
Warranty: *This muffler is warranted to the original purchaser of record and for the original vehicle on which the product was installed, against defects in materials and workmanship for 5 years. Moss' sole obligation under this warranty shall be limited to repair or replacement at Moss' option, provided that the muffler discloses a manufacturing defect. Warranty is void if any defects are caused by a physical impact of any kind.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MICOALSYWI2R|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2016|,|Miata Code Alarm System with 2 Remotes|,|PSL-CODEALARMCA100|,|129.95|,|79.95|,||,||,|0.000 |,||,||,||,|Miata Code Alarm CA100 Alarm System with 2 Remotes.
Compatible with All Years of Mazda Miata MX-5
* Two Button Labeled Function remote Control Transmitter.
* Red Transmitter & Dashboard Mounted LED Lights.
* Impact Sensor
* Door Unlock / Lock
* Trunk Release
* Starter Interrupt
* 125db Siren
* Anti Car Jacking
* Valet Mode
* Car Locator / Panic
* Auto Arm funcion
* Park Lights flash
* 300 foot remote range
Professional Iinstallation Recommended
|,|||-||MICOSY19|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Miata Cooling System 1990-1993|,||,||,||,||,||,||,||,||,||,|
|,|||-||GOMSAD|,|20MAMICARCAS|,|Miata Custom Trunk Lid Pocket Pods |,|TO1022CH|,|183.95|,|159.02|,||,||,|0.000 |,||,|hjk|,||,|Miata Custom Trunk Lid Pocket Pods
Handy storage for vehicle odds & ends....
• Additional storage for smaller loose items like: manuals - wax, polish, detailing products - tire pressure gauges - emergency tools - warning devices, etc.
• Each "pocket" has a lid with closure latch
• Formed pockets made with a material similar to trunk carpet
• Rigid shaped back panel (depending on model)
• No drilling (for easy installation)
• An easy way to add storage space to your vehicle
• Custom patterned & engineered - Made in USA
Latex backed carpet is heat-formed based on pattern-specific design molds and mounted to a rigid HDPE or vacuum-formed ABS backing. Depending on the application and space available for mounting, the Pocket Pods™ design can include one, two or three storage pockets. If trunk mounted, the design always allows easy access to the inside trunk safety release handle.
|,|"Select Year" "2006-2015 Soft Top Only (TO1015CH)"|-||-|||-||MICUPOPO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Custom Trunk Lid Pocket Pods 2006-2015|,|T01015CH|,|183.95|,|129.95|,||,||,|0.000 |,||,||,||,|Miata Custom Trunk Lid Pocket Pods for 2006-2015
Handy storage for vehicle odds & ends....
• Additional storage for smaller loose items like: manuals - wax, polish, detailing products - tire pressure gauges - emergency tools - warning devices, etc.
• Each "pocket" has a lid with closure latch
• Formed pockets made with a material similar to trunk carpet
• Rigid shaped back panel (depending on model)
• No drilling (for easy installation)
• An easy way to add storage space to your vehicle
• Custom patterned & engineered - Made in USA
• 2006-2015 Soft Top Only
Latex backed carpet is heat-formed based on pattern-specific design molds and mounted to a rigid HDPE or vacuum-formed ABS backing. Depending on the application and space available for mounting, the Pocket Pods™ design can include one, two or three storage pockets. If trunk mounted, the design always allows easy access to the inside trunk safety release handle.
|,|||-||MID2SUPXEHID|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata D2S UPGRADE XENON HID BULBS 8000K 2006-2015 (Low Beam)|,|PSL-D2S8000KBULBS|,|129.95|,|58.95|,||,||,|0.000 |,||,||,||,|Miata D2S UPGRADE XENON HID BULBS 8000K, Low Beam
UPGRADE HID Replacement bulbs Brand new pair (2 bulbs), 8000K (Brilliant Crystal Blue light!!). Bulbs only. Will fit D2S Xenon applications. Service life over 3000 Hours. 1 Year warranty. These bulbs are direct replacements for any factory equipped HID D2S vehicle, which include certain 2006-2008 year Miatas, such as the Special edition (check owners manual). If one of your bulbs has burnt out, or you simply want to get a different color/temperature, then these are it for you. These are great for people looking for a more exotic look to their vehicle, or just looking for better light output.
Stock 4300K HID Xenon lights produce a white light that looks almost yellowish compared to a new 8000K bulb. No other modification will be required to your vehicle, simply replace the bulbs go! For certain Mazda Miata years 2006-2015, and for only certain editions.
|,|||-||MIDI2|,||,|MIATA DIFFERENTIALS|,||,||,||,||,||,||,||,||,||,||,|||-||MIDI1|,||,|MIATA DIFFERENTIALS|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA DRIVETRAIN & CLUTCH|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,|19mamidrvial1 19mamidrclfl 19mamidrdi 19mamidrin 19mamidrshsh 19mamidrrepa
|,||,|||-||MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA DRIVETRAIN & CLUTCH|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA DRIVETRAIN & CLUTCH|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,|20mamidrvial 20mamidrclfl 20mamidrdi 20mamidrin 20mamidrshsh 20mamidrrepa
|,||,|||-||MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA DRIVETRAIN & CLUTCH|,||,||,||,|MAZDA MX-5 MIATA DRIVETRAIN PARTS AND ACCESSORIES
|,||,||,||,||,|19mamidrvial miclfl midi miataintake mishsh mirepa
|,||,|||-||MIDUSTAIRFI|,|JACKSONRACING|,|Miata Dual Stage Air Filter |,|JRG-901-975|,|39.99|,|32.98|,||,||,|0.000 |,||,||,||,|This is a high-performance direct replacement for the stock air filter for your Miata MX-5. This filter is made of pre-oiled foam and provides superior filtration while adding up to 3 horsepower. It is easy to clean and carries a lifetime warranty. Jackson Racing Foam Filter Kit JRG-901-970 sold separately.
|,|"Select Year" "1990-1997" "1999-2005"|-||-|||-||NAB-7272|,|19MAMIEXVEAL1|,|Miata DYI Oxygen Sensor For 1994 - 2005 Front or Rear|,|NAB-7272|,|89.95|,|34.99|,||,||,||,||,||,||,|Miata DYI Oxygen Sensor For 1994 - 2005 Front or Rear
Our Oxygen Sensors are not the common universal parts store type, but instead are specifically calibrated to the Miata's factory Ohms requirements just like our popular plug and play units. An economic option to fix any faulty or worn out O2 Sensor on your Miata by cutting and splicing in your original O2 harness. These highest quality DYI 4 wire sensors can be used both front and rear on all 1994 through 2005 1.8L Miatas.
|,|||-||EBCGREENBRAK|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Miata EBC Green Stuff Brake Pads - Front Set 1990-1993|,|325-802|,|105.69|,|80.04|,||,||,|0.000 |,||,|sdfgsdfg|,||,|This pad features a high Kevlar content formulation resulting in an ultra high performance road pad which is extremely kind to discs. With a friction co-efficient of around 0.46µ and high resistance to brake fade (550º C) this pad is a superb upgrade for high performance street cars, high speed freeway use and consecutive heavy braking.
Green Stuff has won many awards from UK magazines, and was rated #1 fast road car brakes by UK's largest circulation motorsport magazine, Max Power, in 1999.
Features and Benefits of Green stuff:
Upgrades brake performance by 30-50%, friction co-efficient of 0.46µ
Excellent initial bite resulting in instant response - no warm-up needed
Class-leading fade resistance on the street - heat stable to a blistering 550ºC
Extremely low disc abrasion - due to high Kevlar content
low dust formula, great for alloys - due to zero carbon content
Low vibration - smooth operation
|,|||-||MIATA-EBC-GREEN-STUFF-BRAKE-PADS---FRONT-SET|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Miata EBC Green Stuff Brake Pads - Front Set 2006-2015|,|DP21774|,|115.45|,|99.95|,||,||,||,||,||,||,|Miata EBC Green Stuff Brake Pads - Front Set 2006-2015
EBC Greenstuff™ has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a no dust pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars we strongly recommend RedStuff which does offer much less dust.
|,|||-||EBCGREENBRAK1|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Miata EBC Green Stuff Brake Pads - Rear Set 1990-1993|,|325-828|,|105.69|,|80.04|,||,||,|0.000 |,||,|sdfgsdf|,||,|This pad features a high Kevlar content formulation resulting in an ultra high performance road pad which is extremely kind to discs. With a friction co-efficient of around 0.46µ and high resistance to brake fade (550º C) this pad is a superb upgrade for high performance street cars, high speed freeway use and consecutive heavy braking.
Green Stuff has won many awards from UK magazines, and was rated #1 fast road car brakes by UK's largest circulation motorsport magazine, Max Power, in 1999.
Features and Benefits of Greenstuff:
Upgrades brake performance by 30-50%, friction co-efficient of 0.46µ
Excellent initial bite resulting in instant response - no warm-up needed
Class-leading fade resistance on the street - heat stable to a blistering 550ºC
Extremely low disc abrasion - due to high Kevlar content
low dust formula, great for alloys - due to zero carbon content
Low vibration - smooth operation
|,|||-||MIATA-EBC-GREEN-STUFF-BRAKE-PADS---REAR-SET-2006-2013|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Miata EBC Green Stuff Brake Pads - Rear Set 2006-2015|,|EBC-DP21775|,|112.39|,|86.30|,||,||,||,||,||,||,|Miata EBC Green Stuff Brake Pads - Rear Set 2006-2015
EBC Greenstuff™ has a high initial brake effect and gives drivers confidence from first application of the brake pedal. There is no such thing as a no dust pad. The very nature of how a brake works requires that some dust be generated to avoid rotor vibration (shimmying). The EBC pad creates less dust and dust is more easily washed off than most. All pads create more dust as they are bedding in especially if rotors are worn. Nominal friction coefficient 0.55. For heavier faster cars we strongly recommend RedStuff which does offer much less dust.
|,|||-||EBCGREENBRAK2|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata EBC Greenstuff Brake Pads - Front Set 1994-2005|,|325-002|,|109.99|,|89.02|,||,||,|0.000 |,||,|sdfgsdfg|,||,|This pad features a high Kevlar content formulation resulting in an ultra high performance road pad which is extremely kind to discs. With a friction co-efficient of around 0.46µ and high resistance to brake fade (550º C) this pad is a superb upgrade for high performance street cars, high speed freeway use and consecutive heavy braking.
Greenstuff has won many awards from UK magazines, and was rated #1 fast road car brakes by UK's largest circulation motorsport magazine, Max Power, in 1999.
Features and Benefits of Greenstuff: Upgrades brake performance by 30-50%, friction co-efficient of 0.46µ
Excellent initial bite resulting in instant response - no warm-up needed
Class-leading fade resistance on the street - heat stable to a blistering 550ºC
Extremely low disc abrasion - due to high Kevlar content low dust formula, great for alloys - due to zero carbon content
Low vibration - smooth operation
|,|"Select Year" "1994-2000 & 2001-2005 Non-Sport Suspension" "2001-2005 Sport Suspension add(+$35)"|-||-|||-||EBCGREENBRAK3|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata EBC Greenstuff Brake Pads - Rear Set 1994-2005|,|325-003|,|109.99|,|89.02|,||,||,|0.000 |,||,|sdfgdsfg|,||,|This pad features a high Kevlar content formulation resulting in an ultra high performance road pad which is extremely kind to discs. With a friction co-efficient of around 0.46µ and high resistance to brake fade (550º C) this pad is a superb upgrade for high performance street cars, high speed freeway use and consecutive heavy braking.
Greenstuff has won many awards from UK magazines, and was rated #1 fast road car brakes by UK's largest circulation motorsport magazine, Max Power, in 1999.
Features and Benefits of Greenstuff: Upgrades brake performance by 30-50%, friction co-efficient of 0.46µ
Excellent initial bite resulting in instant response - no warm-up needed
Class-leading fade resistance on the street - heat stable to a blistering 550ºC
Extremely low disc abrasion - due to high Kevlar content low dust formula, great for alloys - due to zero carbon content
Low vibration - smooth operation
|,|"Select Year" "1994-2000 & 2001-2005 Non-Sport Suspension" "2001-2003 Sport Suspension add(+$35)" "2004-2005 Sport Suspension add(+$35)"|-||-|||-||MIEBCREBRPAF|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Miata EBC Red Stuff Brake Pads - Front Set 1990-1993 (Normal Suspension)|,|EBC-RED1|,|107.43|,|97.02|,||,||,|0.000 |,||,||,||,| Miata EBC Redstuff Brake Pads - Front Set 1990-1993 (Normal Suspension)
There are TWO reasons our customers love Red stuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a Kevlar® fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking, as well as high-speed spirited street driving.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction.
|,|||-||MIEBCREBRPAF1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata EBC Red Stuff Brake Pads - Front Set 1994-2005 |,|EBC-RED3|,|117.43|,|98.01|,||,||,|0.000 |,||,||,||,| Miata EBC Redstuff Brake Pads - Front Set 1994-2005 (Normal Suspension)
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a Kevlar® fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking, as well as high-speed spirited street driving.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction.
For Miata years 2001, 2002, 2003, 2004 and 2005, these pads work with the normal suspension Miata's.
|,|"Select Suspension" "Select Here" "Standard Suspension (DP31002C)" "Sport Suspension (DP31452C) add(+$22)"|-||-|||-||MIEBCREDSTBR|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Miata EBC Red Stuff Brake Pads - Front Set 2006-2015|,|DP31774C|,|186.45|,|149.30|,||,||,|0.000 |,||,||,||,|Miata EBC Redstuff Brake Pads - Front Set 2006-2015
As EBC’s flagship street brake pad material for prestige and faster cars, EBC RedStuff ceramic Brake pads sets new standards in brake performance. RedStuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad “Pick up” or disc scoring and reduced dust even further.
Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early RedStuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
|,|||-||MIEBCREBRPAR|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Miata EBC Red Stuff Brake Pads - Rear Set 1990-1993 (Normal Suspension)|,|EBC-RED2|,|103.82|,|89.01|,||,||,|0.000 |,||,||,||,| Miata EBC Redstuff Brake Pads - Rear Set 1990-1993
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a Kevlar® fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking, as well as high-speed spirited street driving.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction.
|,|||-||MIEBCREBRPAR1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata EBC Red Stuff Brake Pads - Rear Set 1994-2005 |,|EBC-RED4|,|104.95|,|89.02|,||,||,|0.000 |,||,||,||,|Miata EBC Redstuff Brake Pads - Rear Set 1994-2005 (Normal Suspension)
There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.
This material is a Kevlar® fibre based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer, it brakes better and is quieter.
Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking, as well as high-speed spirited street driving.
It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50% dust reduction.
For Miata years 2001, 2002, 2003, 2004 and 2005, these pads work with the normal suspension Miata's.
|,|"Select Suspension" "Select Here" "Standard Suspension (DP31003C)" "Sport Suspension (DP31685C) add(+$22)"|-||-|||-||MIEBCREDSTBR1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Miata EBC Red Stuff Brake Pads - Rear Set 2006-2015|,|EBC-DP31775C|,|176.37|,|113.70|,||,||,|0.000 |,||,||,||,|Miata EBC Redstuff Brake Pads - Rear Set 2006-2015
As EBC’s flagship street brake pad material for prestige and faster cars, EBC RedStuff ceramic Brake pads sets new standards in brake performance. RedStuff ceramic brake pads have always been known for its low dust ability but the latest blend has greatly reduced the phenomenon of pad “Pick up” or disc scoring and reduced dust even further.
Tested at the UK Motor Industries Research Association (MIRA) in witnessed tests early RedStuff reduced car stopping distance in tests by almost 50 feet from 100 MPH offering a staggering 30% brake improvement.
|,|||-||MIEBCYEBRPAF|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Miata EBC YellowStuff Brake Pads - Front Set 1990-1993 (Normal Suspension)|,|EBC-YEL1|,|118.99|,|97.60|,||,||,|0.000 |,||,||,||,| Miata EBC Yellow Stuff Brake Pads - Front Set 1990-1993
Ultra High Friction Pads for Race, Trackday and Street Use.
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.
|,|||-||MIEBCYEBRPAF1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata EBC YellowStuff Brake Pads - Front Set 1994-2005|,|EBC-YEL3|,|129.99|,|109.95|,||,||,|0.000 |,||,||,||,| Miata EBC Yellow Stuff Brake Pads - Front Set 1994-2005 (Normal Suspension)
Ultra High Friction Pads for Race, Trackday and Street Use.
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.
For Miata years 2001, 2002, 2003, 2004 and 2005, these pads work with the normal suspension Miata's.
|,|"Select Suspension" "Select Here" "Standard Suspension (DP41002R)" "Sport Suspension (DP41452R)"|-||-|||-||MIEBCYEBRPAF2|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Miata EBC YellowStuff Brake Pads - Front Set 2006-2015|,|DP41774R|,|162.31|,|151.02|,||,||,|0.000 |,||,||,||,| Miata EBC Yellow Stuff Brake Pads - Front Set 2006-2015
EBC Yellowstuff 1793 compound is a true winner all round, it has high friction from cold, not requiring warm up for street use yet when loaded up and really hot the brakes just get better. Even up to truck weights these pads grip and do not heat fade.
EBC yellows are ECE Brake safety tested which means they must work perfectly from cold at least as good or better than stock pads.
When Yellowstuff see some heat (which is not tested for in the ECE R 90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.
High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade.
Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on high speed Police Vehicle brakes alike.
|,|||-||MIEBCYEBRPAR|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Miata EBC YellowStuff Brake Pads - Rear Set 1990-1993 (Normal Suspension)|,|EBC-YEL2|,|108.99|,|97.01|,||,||,|0.000 |,||,||,||,|Miata EBC Yellow Stuff Brake Pads - Rear Set 1990-1993 (Normal Suspension)
Ultra High Friction Pads for Race, Trackday and Street Use.
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.
|,|||-||MIEBCYEBRPAR1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata EBC YellowStuff Brake Pads - Rear Set 1994-2005 |,|EBC-YEL4|,|109.99|,|97.01|,||,||,|0.000 |,||,||,||,| Miata EBC Yellow Stuff Brake Pads - Rear Set 1994-2005 (Normal Suspension)
Ultra High Friction Pads for Race, Trackday and Street Use.
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.
For Miata years 2001, 2002, 2003, 2004 and 2005, these pads work with the normal suspension Miata's.
|,|"Select Suspension" "Select Here" "Standard Suspension (DP41003R)" "Sport Suspension (DP41685R)"|-||-|||-||MIEBCYEBRPAR2|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Miata EBC YellowStuff Brake Pads - Rear Set 2006-2015|,|DP41775R|,|165.02|,|121.02|,||,||,|0.000 |,||,||,||,| Miata EBC Yellow Stuff Brake Pads - Rear Set 2006-2009
EBC Yellowstuff 1793 compound is a true winner all round, it has high friction from cold, not requiring warm up for street use yet when loaded up and really hot the brakes just get better. Even up to truck weights these pads grip and do not heat fade.
EBC yellows are ECE Brake safety tested which means they must work perfectly from cold at least as good or better than stock pads.
When Yellowstuff see some heat (which is not tested for in the ECE R 90 brake safety regulations) they really show their pedigree. On Japanese cars built with lower friction FF rated pads these deliver a full grade higher stopping and on German cars built with GG these are about the only aftermarket pads that will match or beat the pretty good German OE spec pads and that takes some doing.
High efficiency performance and race brakes for track & street use, fast to bed-in, great for street vehicle brake upgrade.
Not only a high friction pad but very resistant to heat and loads of heavy braking means that yellowstuff has been used with great success in race cars and on high speed Police Vehicle brakes alike.
|,|||-||MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA EXHAUST|,||,||,||,|MAZDA MIATA EXHAUST SYSTEMS, MUFFLERS, PIPES, AND TIPS
|,||,||,||,||,|20mamiexveal 20mamiexsymu 20mamiexrepa 20mamiexcaco 20mamiexheco 20mamiexgaan
|,||,|||-||MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA EXHAUST|,||,||,||,|MAZDA MIATA EXHAUST SYSTEMS, MUFFLERS, PIPES, AND TIPS
|,||,||,||,||,|19mamiexveal 19mamiexsymu 19mamiexrepa 19mamiexcaco 19mamiexhe 19mamiexgaan
|,||,|||-||MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA EXHAUST|,||,||,||,|MAZDA MIATA EXHAUST SYSTEMS, MUFFLERS, PIPES, AND TIPS
|,||,||,||,||,|19mamiexveal1 19mamiexsymu1 19mamiexrepa1 19mamiexcaco1 19mamiexheco 19mamiexgaan1
|,||,|||-||MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA EXHAUST|,||,||,||,||,||,||,||,||,||,||,|||-||EXAC|,||,|MIATA EXTERIOR PARTS|,|newitem166733459|,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA EXTERIOR PARTS 06-15|,||,||,||,|MAZDA MX-5 MIATA EXTERIOR PARTS AND ACCESSORIES
|,||,||,||,||,|20mimiexpa 20mamiexac 20mamiexbaan 20mamiexbost 20mamiexfuli 20mamiexgran 20mamiexli 19mamiexlura 20mamiexstba
|,||,|||-||MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA EXTERIOR PARTS 2016+|,||,||,||,|MAZDA MX-5 MIATA EXTERIOR PARTS AND ACCESSORIES
|,||,||,||,||,|20mimiexpa 20mamiexac 20mamiexbaan 20mamiexbost 20mamiexfuli 20mamiexgran 20mamiexli 19mamiexlura 20mamiexstba
|,||,|||-||MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA EXTERIOR PARTS 90-97|,||,||,||,|MAZDA MX-5 MIATA EXTERIOR PARTS AND ACCESSORIES
|,||,||,||,||,|EXTERIOR VIEW ALL: naexviall
EXTERIOR ACCESSORIES: naexac
BADGES & GRAPHICS: naexbagr
BODY STYLING: naexbost
FUEL LIDS: naexfuli
GRILL & BRA: naexgrbra
EXTERIOR LIGHTING: naexli
LUGGAGE RACK: naexlura
STYLE BARS: naexstba
|,||,|||-||MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA EXTERIOR PARTS 99-05|,||,||,||,|MAZDA MX-5 MIATA EXTERIOR PARTS AND ACCESSORIES
|,||,||,||,||,|nbviewall nbaccessories nbbaandgr nbbodystyling nbfuellids nbgrillandbra nblighting nbluraex nbstylebars
|,||,|||-||MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA GIFTS & MORE|,||,||,||,|MAZDA MX-5 MIATA GIFTS, PARTS, ACCESSORIES, AND MORE
|,||,||,||,||,|migimoviall gice accessoryitems apparel lifrandpl books
|,||,|||-||MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA GIFTS & MORE|,||,||,||,|MAZDA MX-5 MIATA GIFTS, PARTS, ACCESSORIES, AND MORE
|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA GIFTS & MORE|,||,||,||,|MAZDA MX-5 MIATA GIFTS, PARTS, ACCESSORIES, AND MORE
|,||,||,||,||,|migimoviall gice accessoryitems apparel lifrandpl books
|,||,|||-||MAZDA-MX-5-MIATA-MIATA-GIFTS-MORE-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA GIFTS & MORE|,||,||,||,|MAZDA MX-5 MIATA GIFTS, PARTS, ACCESSORIES, AND MORE
|,||,||,||,||,|migimoviall gice accessoryitems apparel lifrandpl books
|,||,|||-||GRILLECOVER|,|NAEXGRBRA|,|Miata Grille Cover|,|MC-GC|,|89.99|,|69.95|,||,||,|0.000 |,||,||,||,| Miata Grille Cover
Protect your expensive radiator! Stainless steel 1/4" mesh grille cover that fits in the stock Miata grille opening and will protect your radiator from on track debris.
Protect that radiator! Our 1/4" stainless steel mesh screed is designed to take a severe hit from just about any debris found on the track. Much better than galvanized or plastic, this stainless steel mesh grille is weaved together and is much stronger than any of the alternatives on the market. Its laser cut for a precise clean shape every time.
Easy to install with existing bolts on the car and 2 zip ties.
SCCA Rules now allow (Jan 2016) for a 1/8" opening between the mesh to be legal.
If you live in a state that it gets hot we highly recommend the 1/4" mesh as the 1/8" will reduce the amount of airflow coming in through the nose and can have an impact on cooling capability in hot and humid situations.
Choose your version from the drop down menu.
|,|"Model Year" "Select Here" "1990-1997" "1999-2000"|-||-|"Style" "Select Here" "1/4 Mesh" "1/8 Mesh"|-||-|||-||MIH1IONCR2BY|,|NBACCESSORIES|,|Miata H1 ION CRYSTAL FOG LIGHT BULBS (2001-2003) by PIAA|,|PIAA-13521|,|35.49|,|33.49|,||,||,|0.000 |,||,||,||,|Fits the 2001-2003 Mazda Miata Fog Lights
PIAA’s patented Ion Crystal technology is a great way to improve your visibility in inclement weather. Ion Crystal puts out an amber/yellow light that is less reflective than white light thus greatly reducing the amount of glare in extreme fog.
Specs
* Bulb Type H1
* Wattage 55w = 100w XTRA
* Technology Xtreme White Plus
For the low and high beams, check out our PIAA 9000 series below.
|,|"Select Quantity" "Single Pack" "Double Pack add(+$33.49)"|-||-|||-||MIH1XTWHPL2B|,|NBACCESSORIES|,|Miata H1 XTREME WHITE PLUS FOG LIGHT BULBS (2001-2003) by PIAA|,|PIAA-11155|,|46.90|,|42.65|,||,||,|0.000 |,||,||,||,|Fits the 2001-2003 Mazda Miata Fog Lights
Those with H1 style headlights can now benefit from PIAA’s Xtreme White technology. Rated at 4000K and providing 110watts of light from only 55watts these bulbs provide a brilliant Xtreme cool white light.
Specs
* Bulb Type H1
* Wattage 55w = 110w Xtra, 4000K
* Technology Xtreme White Plus
For the low and high beams, check out our PIAA 9000 series below.
|,|||-||MIH11PLYEBU2|,|NBACCESSORIES|,|Miata H11 PLASMA YELLOW FOG LIGHT BULBS (2004) by PIAA|,|PIAA-13531|,|74.99|,|59.90|,||,||,|0.000 |,||,||,||,|Fits the 2004 Mazda Miata Fog Lights
PIAA's patented Ion Crystal technology is a great way to improve your visibility in inclement weather. Ion Crystal puts out an amber/yellow light that is less reflective than white light thus greatly reducing the amount of glare in extreme fog.
Specs
* Bulb Type H11
* Wattage 55w = 110w XTRA
* Technology Ion Crystal with Yellow Top
For the low and high beams, check out our PIAA 9000 series below.
|,|"Select Quantity" "Single Pack" "Twin Pack add(+$39.50)"|-||-|||-||MIH11XTWHPL2|,|NBACCESSORIES|,|Miata H11 XTREME WHITE PLUS FOG LIGHT BULBS (2004) by PIAA|,|PIAA-15111|,|49.85|,|46.70|,||,||,|0.000 |,||,||,||,|Fits the 2004 Mazda Miata Fog Lights
PIAA’s Xtreme White Plus H-11 with a Kelvin rating of 4000K provides an intense white light and the superior performance of Xtra Technology. So lose those boring factory bulbs and upgrade to PIAA’s Xtreme White Plus H-11 and experience the difference.
Specs
* Bulb Type H11
* Wattage 55W = 110W XTRA, 4000K
* Technology Xtreme White Plus
For the low and high beams, check out our PIAA 9000 series below.
|,|"Select Quantity" "Single Pack" "Double Pack add(+$43.85)"|-||-|||-||23-10104|,|NBVIEWALL|,|Miata H4 (9003) Xtreme White Hybrid Twin Pack Halogen Bulbs (1999-2000) by PIAA|,|PIAA-23-10104|,|79.95|,|49.84|,||,||,||,||,||,||,|Miata H4 (9003) Xtreme White Hybrid Twin Pack Halogen Bulbs (1999-2000) by PIAA
Whiter and Brighter than stock bulbs. DOT compliance for worry free street legal operation. Up to 3900K color for increased depth perception and contrast. Best balance between performance and bulb life
|,|||-||MIH4SUPLGTBU|,|NBACCESSORIES|,|Miata H4 Night Tech 60/55W Single Bulb (1999-2000) by PIAA|,|PIAA-11704|,|43.98|,|34.95|,||,||,|0.000 |,||,||,||,|Miata H4 Night Tech 60/55W (1999-2000) by PIAA
PIAA's Xtra Technology produces more light with stock power draw.
Engineered to optimize output of stock or aftermarket lights. White 3600K color provides better color recognition, contrast, and depth perception
Longest life and DOT/SAE Compliant.
Specs
* Bulb Type H4
* Wattage 60/55w, 3600K
* H4 Night Tech 60/55W Single Bulb
The H4 produces a fog light on low beam. Bulbs for the low beam only.
|,|||-||MIH4PLYEXTTW|,|SHOP-BY-SALE|,|Miata H4 Solar Yellow Halogen Bulbs (1999-2000) by PIAA|,|PIAA-22-13404|,|49.95|,|39.86|,||,||,|0.000 |,||,||,||,|Miata H4 Solar Yellow Halogen Bulbs by PIAA
Highest quality quartz glass and alloy filament for better performance and durability. Vivid-Coat Technology has far less light loss than standard coated bulbs. Cutting edge yellow output improves visibility in inclement weather. 2500K Yellow Color has significantly less glare than white light.
Improves visibility in inclement weather
Specs
* Number of Bulbs: 2
* Bulb Type: Halogen
* Bulb Size: H4 (9003)
* Color Temperature: 2500K
* Country of Manufacture: Japan
* Wattage: 60 Watts High / 55 Watts Low
* Bulb Color: Yellow
|,|"Select Quantity" "Select Here" "Single (13514)" "Twin Pack add(+$12.00)"|-||-|||-||MIH4EXWHPLBU|,|NBACCESSORIES|,|Miata H4 XTreme White Plus Halogen Bulbs (1999-2000) by PIAA|,|PIAA-15224|,|77.99|,|59.99|,||,||,|0.000 |,||,||,||,| Low beam H4, produces a fog light on the low beam for the 1999-2000 Miata
The very popular Xtreme White Plus technology is now available in H4 style bulbs. Rated at 4000K and providing 110watts of light from only 55watts these bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.The Blue topcoat on these bulbs adds a slight blue tint to the lamp for enhanced curb appeal.
Specs
* Bulb Type H4
* Wattage 60/55w = 110/100ww, 4000K
* Technology Xtreme White Plus
* Twin Pack
|,|||-||MIH7XTWHPL2B|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata H7 XTREME WHITE PLUS BULBS (2008) by PIAA|,|PIAA-17155|,|48.48|,|46.48|,||,||,|0.000 |,||,||,||,| Fits the Low Beam of the 2008 Mazda Miata
The very popular Xtreme White Plus technology is now available in H7 style bulbs. Rated at 4000K and providing 110watts worth of light from only 55watts these bulbs will provide a brilliant Xtreme cool white light that will light up road hazards and street signs long before a normal halogen bulb.
Specs
* Bulb Type H7
* Wattage 55W = 110W XTRA, 4000K
* Technology Xtreme White Plus
Use our PIAA H11 bulbs for the fog lights.
|,|"Select Quantity" "Single Pack" "Twin Pack add(+$36.47)"|-||-|||-||MIH7STWH2BYP|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata H7 STAR WHITE BULBS (2008) By PIAA|,|PIAA-White|,|58.48|,|49.02|,||,||,|0.000 |,||,||,||,|Fits the 2008 Mazda Miata Low Beams.
PIAA's Xtreme White Hybrid line of bulbs feature the high output and reliability that today's drivers demand. The bulbs are designed to provide a brighter and whiter beam than stock bulbs. Striking a balance between performance and bulb life, the halogen bulbs offer more contrast and better down-road illumination for improved safety and comfort during any driving situation.
A 3900 Kelvin rating creates increased depth perception and contrast compared to standard bulbs. DOT-approved, PIAA White Hybrid Halogen Bulbs are street-legal in all 50 states and Canada.
Specs:
* Bulb Type H7
* Wattage 55w = 100w, 3900K
For the fog lights, use our PIAA H11 bulbs.
|,|"Select Quantity" "Single Pack" "Twin Pack add(+$49.02)"|-||-|||-||MIH7XEBU55W2|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata H7 Xenon bulbs 55W 2006-2008 (Low Beams)|,|PSL-H7XENONBULBS2|,|89.95|,|59.99|,||,||,|0.000 |,||,||,||,|Miata H7 Xenon bulbs 55W (Low Beam)
Give your Miata that expensive look, found on todays newer luxury cars, for a fraction of the cost!
These bulbs are the best out their! Made of a high quality high performance materials with a fiberglass base that will not burn out your wiring.
These bulbs are guaranteed to give off a bright white light with a blue tint. Don't be fooled by cheap imitations that can be found at your local auto parts stores. Those cheap quality bulbs don't compare to these. I've seen these bulbs retail for as much as $80 a set, so buy now!
These bulbs give off that true white light with a hint of blue, not that stock yellow. They are Xenon gas filled. Not ion filled that gives off that rainbow look. Besides looking cool, they dramatically improve your visibility at night! Price for Pair
For Miata year 2006-2008, non-HID (check owners manual).
|,|||-||MIHA2HIDCOKI3|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Halo 2 HID Conversion Kit for the Low Beam (2005-2012)|,|HO-XCH7-W|,|192.00|,|160.00|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata years 2005, 2006, 2007, 2008, 2009, 2010. 2011, and 2012
H7 6,000k HID Conversion Kit
True HID Xenon easy plug & play installation 6000K. Nice bright white light with a bluish glow! Ballast, Lights, and plugs included!
35W Xenon operation is 3 times brighter than stock halogen bulbs, and you will notice a 300% increase in lighting, making driving safer, while consuming 60% less power!
Designed for the 2005-2012 low beam. 9005 Halo 2 kit needed for the 2005 high beam.
|,|||-||MIHA90ICBLHI|,|NBACCESSORIES|,|Miata Halo 9005 Icis Blue, High Beam Bulbs (2001-2005)|,|HO-IB9005|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata high beam years 2001, 2002, 2003, 2004, and 2005.
9005 Icis Blue (12v 65w) Twin Pack. The Icis Blue bulbs series is rated at 4,500k. Get the look of blue. With these bulbs you will have both, the look and vision to see the road ahead before the others do!
For the low beams, use our Halo 9006 bulbs for 2001-2004, and our Halo H7 bulbs for 2005.
|,|||-||MIHA90PLWHHI|,|NBACCESSORIES|,|Miata Halo 9005 Platinum White, High Beam Bulbs (2001-2005)|,|HO-PL9005|,|59.99|,|49.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata high beam years 2001, 2002, 2003, 2004, and 2005.
9005 Platinum White (12v 65w) Twin Pack. Platinum White bulbs feature a patented iridesent coating. This color-shifting coating provides the closest look to HID ( High Intensity Discharge) from a halogen bulb!
For the low beams, use our Halo 9006 bulbs for 2001-2004, and our Halo H7 bulbs for 2005.
|,|||-||MIHA90PUWHHI|,|NBACCESSORIES|,|Miata Halo 9005 Purple White, High Beam Bulbs (2001-2005)|,|HO-PR9005|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata high beam years 2001, 2002, 2003, 2004, and 2005.
9005 Purple White (12v 65w) Twin Pack. Purple White bulbs radiate a unique balance of purple and blue light hues, making these bulbs a much admired choice among drivers.
For the low beams, use our Halo 9006 bulbs for 2001-2004, and our Halo H7 bulbs for 2005.
|,|||-||MIHA90SOYEHI|,|NBACCESSORIES|,|Miata Halo 9005 Solaris Yellow , High Beam Bulbs (2001-2005)|,|HO-SY9005|,|41.99|,|34.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata high beam years 2001, 2002, 2003, 2004, and 2005.
9005 Solaris Yellow (12v 65w) Twin Pack. Solaris Yellow contains a real gold coating (25%) designed to give maximum visibility. Cutting through rain, snow, and fog, its no wonder why these bulbs are the clear choice of rally car drivers!
For the low beams, use our Halo 9006 bulbs for 2001-2004, and our Halo H7 bulbs for year 2005.
|,|||-||MIHA90ICBLLO|,|NBACCESSORIES|,|Miata Halo 9006 Icis Blue, Low Beam Bulbs (2001-2004)|,|HO-IB9006|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata low beam years 2001, 2002, 2003, and 2004.
9006 Icis Blue (12v 55w) Twin Pack. The Icis Blue bulbs series is rated at 4,500k. Get the look of blue. With these bulbs you will have both, the look and vision to see the road ahead before the others do!
For the high beam, use our HALO 9005 bulbs.
|,|||-||MIHA90PLWHLO|,|NBACCESSORIES|,|Miata Halo 9006 Platinum White, Low Beam Bulbs (2001-2004)|,|HO-PL9006|,|59.99|,|49.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata low beam years 2001, 2002, 2003, and 2004.
9006 Platinum White (12v 55w) Twin Pack. Platinum White bulbs feature a patented iridesent coating. This color-shifting coating provides the closest look to HID ( High Intensity Discharge) from a halogen bulb!
For the high beam, use our HALO 9005 bulbs.
|,|||-||MIHA90PUWHLO|,|NBACCESSORIES|,|Miata Halo 9006 Purple White, Low Beam Bulbs (2001-2004)|,|HO-PR9006|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata low beam years 2001, 2002, 2003, and 2004.
9006 Purple White (12v 55w) Twin Pack. Purple White bulbs radiate a unique balance of purple and blue light hues, making these bulbs a much admired choice among drivers.
For the high beam, use our HALO 9005 bulbs.
|,|||-||MIHA90SOYELO|,|NBACCESSORIES|,|Miata Halo 9006 Solaris Yellow, Low Beam Bulbs (2001-2004)|,|HO-SY9006|,|41.99|,|34.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata low beam years 2001, 2002, 2003, and 2004.
9006 Solaris Yellow (12v 55w) Twin Pack. Solaris Yellow contains a real gold coating (25%) designed to give maximum visibility. Cutting through rain, snow, and fog, its no wonder why these bulbs are the clear choice of rally car drivers!
For the high beam, use our HALO 9005 bulbs.
|,|||-||MIHAH4ICBL1|,|NBACCESSORIES|,|Miata Halo H4 Icis Blue Bulbs (1999-2000)|,|HA-IBH4|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,| Fits the Mazda MX-5 Miata for years 1999 and 2000.
H4 Icis Blue (12v 60/55w) Twin Pack. The Icis Blue bulbs series is rated at 4,500k. Get the look of blue. With these bulbs you will have both, the look and vision to see the road ahead before the others do!
|,|||-||MIHAH4PLWH1|,|NBACCESSORIES|,|Miata Halo H4 Platinum White Bulbs (1999-2000)|,|HO-PLH4|,|59.99|,|49.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata years 1999 and 2000.
H4 Platinum White (12v 60/55w) Twin Pack. Platinum White bulbs feature a patented iridesent coating. This color-shifting coating provides the closest look to HID ( High Intensity Discharge) from a halogen bulb!
|,|||-||MIHAH4PUWHBU|,|NBACCESSORIES|,|Miata Halo H4 Purple White Bulbs (1999-2000)|,|HO-PRH4|,|45.99|,|39.95|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata for years 1999 and 2000.
H4 Purple White (12v 60/55w) Twin Pack. Purple White bulbs radiate a unique balance of purple and blue light hues, making these bulbs a much admired choice among drivers.
|,|||-||MIHAH4SOYEBU|,|NBACCESSORIES|,|Miata Halo H4 Solaris Yellow Bulbs (1999-2000)|,|HO-SYH4|,|41.99|,|34.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata years 1999 and 2000.
H4 Solaris Yellow (12v 60/55w) Twin Pack. Solaris Yellow contains a real gold coating (25%) designed to give maximum visibility. Cutting through rain, snow, and fog, its no wonder why these bulbs are the clear choice of rally car drivers!
|,|||-||MIHAH7ICBLLO|,|NBACCESSORIES|,|Miata Halo H7 Icis Blue Low Beam Bulbs (2005-2008)|,|HO-IBH7|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata low beams for 2005, 2006, 2007, and 2008.
H7 Icis Blue (12v 55w) Twin Pack. The Icis Blue bulbs series is rated at 4,500k. Get the look of blue. With these bulbs you will have both, the look and vision to see the road ahead before the others do!
For the high beams, try our Halo 9005 bulbs for 2005, and our Halo H9 bulbs for 2006-2008.
|,|||-||MIHAH7PLWHLO|,|NBACCESSORIES|,|Miata Halo H7 Platinum White Low Beam Bulbs (2005-2008)|,|HO-PLH7|,|59.99|,|49.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata low beams for 2005, 2006, 2007, and 2008.
H7 Platinum White (12v 55w) Twin Pack. Platinum White bulbs feature a patented iridesent coating. This color-shifting coating provides the closest look to HID ( High Intensity Discharge) from a halogen bulb!
For the high beams, try our Halo 9005 bulbs for the 2005, and H9 bulbs for the 2006-2008.
|,|||-||MIHAH7PUWHLO|,|NBACCESSORIES|,|Miata Halo H7 Purple White Low Beam Bulbs (2005-2008)|,|HO-PRH7|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,|Fits the Miata MX-5 Miata years 2005, 2006, 2007, and 2008
H7 Purple White (12v 55w) Twin Pack. Purple White bulbs radiate a unique balance of purple and blue light hues, making these bulbs a much admired choice among drivers.
For the high beams, try our Halo 9005 bulbs for 2005, and H9 bulbs for 2006-2008.
|,|||-||MIHAH7SOYELO|,|NBACCESSORIES|,|Miata Halo H7 Solaris Yellow Low Beam Bulbs (2005-2008)|,|HO-SYH7|,|41.99|,|34.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata low beams for years 2005, 2006, 2007, 2008,and 2009
H7 Solaris Yellow (12v 55w) Twin Pack. Solaris Yellow contains a real gold coating (25%) designed to give maximum visibility. Cutting through rain, snow, and fog, its no wonder why these bulbs are the clear choice of rally car drivers!
For the high beams, try our Halo 9005 bulbs for years 2005, and H9 bulbs for years 2006-2008.
|,|||-||MIHAH9HIBEBU|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Halo H9 Icis Blue High Beam Bulbs (2006-2008)|,|HO-IBH9|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata high beams for years 2006, 2007, and 2008.
H9 Icis Blue (12v 65w) Twin Pack. The Icis Blue bulbs series is rated at 4,500k. Get the look of blue. With these bulbs you will have both, the look and vision to see the road ahead before the others do!
For the low beams, check out our Halo H7 bulbs for 2005-2008 Miatas.
|,|||-||MIHAH9PLWHHI|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Halo H9 Plantinum White High Beam Bulbs (2006-2008)|,|HO-PLH9|,|59.99|,|49.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata high beams for years 2006, 2007, and 2008.
H9 Platinum White (12v 65w) Twin Pack. Platinum White bulbs feature a patented iridesent coating. This color-shifting coating provides the closest look to HID ( High Intensity Discharge) from a halogen bulb!
For the low beams, check out our Halo H7 bulbs for 2005-2008 Miatas.
|,|||-||MIHAH9PUWHHI|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Halo H9 Purple White High Beam Bulbs (2006-2008)|,|HO-PRH9|,|35.99|,|29.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata high beams for years 2006, 2007, and 2008.
H9 Purple White (12v 65w) Twin Pack. Purple White bulbs radiate a unique balance of purple and blue light hues, making these bulbs a much admired choice among drivers.
For the low beams, check out our Halo H7 bulbs for 2005-2008 Miatas.
|,|||-||MIHAH9SOYEHI|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Halo H9 Solaris Yellow High Beam Bulbs (2006-2008)|,|HO-SYH9|,|41.99|,|34.99|,||,||,|0.000 |,||,||,||,|Fits the Mazda MX-5 Miata high beams for years 2006, 2007, and 2008.
H9 Solaris Yellow (12v 65w) Twin Pack. Solaris Yellow contains a real gold coating (25%) designed to give maximum visibility. Cutting through rain, snow, and fog, its no wonder why these bulbs are the clear choice of rally car drivers!
For the low beams, check out our Halo H7 bulbs for 2005-2008 Miatas.
|,|||-||MIHADOGBOHAB|,|BLACKFRIDAYSALE|,|Miata Hard Dog Bolt-In Harness Bar 1990-2005 - Sale! |,|HDG-BHB|,|279.99|,|214.95|,||,||,|0.000 |,||,||,||,|Miata Hard Dog Bolt-In Harness Bar 1990-2005
The Bolt-In Harness Bar is designed for competition harness wrap-around shoulder strap attachment. Easily installed in all year model Miatas in conjunction with any version of The Hard Bar, Sport Bar or Hard Core Bar with the least amount of interference for normal use of the car.
Requires no drilling or panel alteration. Serves as a retrofit in situations where harness attachments were not ordered with a roll bar, or if you have an M2 bar with harness tabs and track event rules require individual shoulder strap attachments.
Features include:
* Complete use of hard top, soft top and all glass rear windows
* Durable Powdercoat Finish
* Constructed of highest quality laser cut plates and 1.5" OD X .120 wall DOM tubing
NOTE: This Miata Part is a "Bolt-In Harness Bar" Only. This part does not come with a Roll Bar or any other parts on this picture.
|,|"Shipping Cost" "add(+$85)"|-||-|||-||HARDDOGHITCH|,|BLACKFRIDAYSALE|,|Miata Hard Dog Horizontal Receiver Hitch 1990-1997|,|HDG-R1|,|319.95|,|214.95|,||,||,|5.000 |,||,||,||,|Hard Dog Miata / MX-5 receiver hitches are suitable for tire carriers, bike racks and small trailers.
Our superior mounting systems provide the strongest attachment point available.
Features include:
* Class 1 Standard 1-1/4" receiver
* Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than a Miata / MX-5 should haul)
* Black Powdercoat finish
* Hitch pin and required mounting hardware included
* Safety chain anchors
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||MIHADOGHOREH|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Hard Dog Horizontal Receiver Hitch 1999-2005 - Sale! |,|HDG-R2|,|299.95|,|214.95|,||,||,|0.000 |,||,||,||,|ard Dog Miata / MX-5 receiver hitches are suitable for tire carriers, bike racks and small trailers.
Our superior mounting systems provide the strongest attachment point available.
Features include:
* Class 1 Standard 1-1/4" receiver
* Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than a Miata / MX-5 should haul)
* Black Powdercoat finish
* Hitch pin and required mounting hardware included
* Safety chain anchors
|,|"Shipping & Handling" "add(+$109)"|-||-|||-||MIHADOGHOREH1|,|BLACKFRIDAYSALE|,|Miata Hard Dog Horizontal Receiver Hitch 2006-2010 - Sale! |,|HDG-R3|,|299.95|,|254.95|,||,||,|5.000 |,||,||,||,|Hard Dog Miata / MX-5 receiver hitches are suitable for tire carriers, bike racks and small trailers.
Our superior mounting systems provide the strongest attachment point available.
Features include:
* Class 1 Standard 1-1/4" receiver
* Class 1 weight rating: 200 lbs tongue wieght / 2000 lbs gross trailer weight. (More than a Miata / MX-5 should haul)
* Black Powdercoat finish
* Hitch pin and required mounting hardware included
* Safety chain anchors
|,|"Shipping cost" "add(+$109)"|-||-|||-||VILEPAROBARC|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Miata Hard Dog Padded Roll Bar Covers - Vinyl or Leather - Sale! |,|HDG-RBCOVERS|,|139.99|,|109.00|,||,||,|0.000 |,||,||,||,|These stitched vinyl or leather Hard Dog roll bar covers include the NEW custom formed high density padding made by BSCI. Finally, you can protect your roll bar and your head!
|,|"Select HardDog" "Select Here" "Hard Bar" "Any Hard Core " "M1 Sport Bar" "M2 Sport Bar" "Deuce Roll Bar add(+$80)"|-||-|"Select Diagonals" "Select Here" "No Diagonals" "Single Diagonal" "Double Diagonal"|-||-|"Select Padded Cover" "Select Here" "Black Vinyl" "Black Leather add (+$65)"|-||-|||-||M2HARDCOREBAR|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-1999-2005|,|Miata HardDog Hard Core M2 Bar 1999-2005 - Sale! |,|HDG-9B1|,|759.99|,|644.99|,||,||,|30.000 |,||,||,||,|Miata HardDog Hard Core M2 Bar 1999-2005
The M2 HARD CORE BAR is designed for the serious SCCA SOLO I competitor that wants to maintain a dual purpose car for street and racing use.
Compatible with the Mazda glass rear window only.
Single main hoop diagonal brace and harness tabs are standard - Double Diagonals are optional for added strength and better rear vision.
1.25" TALLER THAN THE SPORT BAR - MEETS THE 2" OVER-THE-TOP-OF-HELMET RULE FOR MOST DRIVERS (THIS OBVIOUSLY VARIES WIDELY BETWEEN INDIVIDUALS - A SEAT CHANGE MAY BE NECESSARY FOR TALLER DRIVERS)
|,|"Select Configuration" "Select Here" "Stndrd BLK Powdercoat sngl dgnl" "BLK powdercoat DBL dgnls add(+$70)"|-||-|"Select Padding and Cover Option" "Select Here" "No Padding or Cover" "W/ Padded Black Vinyl Cover add(+$155)" "W/ Padded Blk Leather Cover add(+$199)"|-||-|"Freight Cost" "add(+$215)"|-||-|||-||MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA HARDTOP|,||,||,||,|MAZDA MX-5 MIATA HARDTOP, PARTS AND ACCESSORIES 1999-2005|,||,||,||,||,||,|Mazda MX-5 Miata Hardtops 1990-2005:
|,|||-||MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-HARDTOP-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA HARDTOP|,||,||,||,|MAZDA MX-5 MIATA HARDTOPS, PARTS AND ACCESSORIES 2016+|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA HARDTOP|,||,||,||,|MAZDA MX-5 MIATA HARDTOPS, PARTS AND ACCESSORIES 1990-1997|,||,||,||,||,||,||,|||-||MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-06-12|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA HARDTOP|,||,||,||,|MAZDA MX-5 MIATA HARDTOPS, PARTS AND ACCESSORIES 2006-2013|,||,||,||,||,||,||,|||-||HAHPSBRPAFRS1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Hawk HPS Brake Pads - Front Set 1994-2005|,|HAW-HPS3|,|109.99|,|89.95|,||,||,|0.000 |,||,||,||,| HPS - High Performance Street Miata Pads 94-05, Normal Suspension
Superior Stopping Power
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.
|,|||-||HAHPSBRPAFRS2|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Hawk HPS Brake Pads - Front Set 2001-2005 Sport|,|HAW-HPS5|,|165.99|,|148.02|,||,||,|0.000 |,||,||,||,| HPS - High Performance Street Miata Pads Front Set 01-05, for Sport Suspension
Superior Stopping Power
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.
|,|||-||HAHPSBRPARES1|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Hawk HPS Brake Pads - Rear Set 1994-2005|,|HAW-HPS4|,|109.99|,|89.95|,||,||,|0.000 |,||,||,||,| HPS - High Performance Street Miata Pads Rear 94-05, Normal Suspension
Superior Stopping Power
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.
|,|||-||HAHPSBRPARES2|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Hawk HPS Brake Pads - Rear Set 2001-2005 Sport|,|HAW-HPS6|,|148.99|,|132.02|,||,||,|0.000 |,||,||,||,| HPS - High Performance Street Miata Pads Rear Set 01-05, for Sport Suspension
Superior Stopping Power
HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.
The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you’ll have a highly durable brake pad with less brake dust.
|,|Year "2001-2002" "2003-2005 add(+$10)"|-||-|||-||60EUXEHIDHEC|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|MIATA HEADLIGHT CONVERSION KIT 7" ROUND 1990-1997 - Sale! |,|PSL-6024EUROKIT|,|119.99|,|84.95|,||,||,|0.000 |,||,||,||,|MIATA HEADLIGHT CONVERSION KIT 7" ROUND 1990-1997
THE MIATA CONVERSION KIT 7" ROUND
This kit features:
* Two 7" Round Diamond cut sealed beam conversion housings
* Two H4 bulbs rated at 65/55 Watts, with an output of 90/100 Watts
* Two rubber covers (to keep the housings dry)
* Plug and play no rewiring is necessary
This kit really lights up the road better than traditional halogen sealed beams. You'll notice a significant increase in lighting. Your car will light up the road like it never has before!
Now you can have your car project a clean bright white light with a bluish glow just like the newer luxury cars.
For 1990-1997 Mazda Miatas only.
|,|||-||MIHIDKITTRXE|,|NBACCESSORIES|,|Miata HID Kit True Xenon Headlight Conversion |,|PSL-H4HIDKIT|,|679.95|,|139.95|,||,||,|0.000 |,||,||,||,|Miata Xenon HID conversion kit.
True HID Xenon easy installation 8000K. Nice bright white light with a bluish glow! Ballast, Lights, and plugs included!
Off road use only, check local laws.
35W Xenon operation is 3 times brighter than stock halogen bulbs, and you will notice a 300% increase in lighting, making driving safer, while consuming 60% less power!
For Mazda Miata Years 1999-2000.
|,|||-||MIIMOCECONA1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata I.L. Motorsport Center Console NA 1990-1997 |,|905-265-266|,|399.99|,|338.95|,||,||,|0.000 |,||,||,||,|Mazda Miata I.L. Motorsport Center Console NA 1990-1997 manual trans
The coolest console ever produced for your Mazda Miata! The OEM style quality and appearance make this an excellent addition for your Miata. You will enjoy the additional storage and other practical features of this console. Be sure to check out the available armrest and device holder as well.
Features
* Larger cargo box
* Longer arm rest
* Utilizes your OEM keylock and window switches from the original center console
* Slender storage slot on the driver's side for those quick accessible items like garage door openers or toll tokens
* Two cup holders for your drinks or universal cell phone/ipod holders.
Note: For 5-Speed Manual Trans Miata Only
|,|"Select Type" "Select Here" "With Cupholders" "Without Cupholders"|-||-|||-||MIIGWISETBYC|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata Ignition Wire Set by Cobalt (1990-2005)|,|CBT-971-108|,|49.99|,|29.98|,||,||,|0.000 |,||,||,||,|Cobalt Ignition Wire Sets are made precisely for your vehicle, and carry a Lifetime Warranty against defective materials or workmanship! Cobalt Wires feature:
* Compact Silicone Plug Boots provide extra clearance
* EPDM Layer provides more electrical insulation than silicone-over-silicone
* Conductive Polymer Coating protects the conductor and provides terminal contact
* Stainless Steel Conductor for maximum conductivity
* Aramid Fibers provide superior tensile strength
* Spiral Magnetic Core supresses RFI/EMI interference
* Fiberglass Braid provides superior tensile strength
* 8mm Silicone Jacket resists high temperatures, fuels and oils
* Locking Terminals stay connected under high vibration.
|,|"Select Year" "Select Here" "1990-2000 (971-108) add(+$10.00)" "2001-2005 (971-109)"|-||-|||-||MIATAINTAKE2|,||,|MIATA INTAKE|,||,||,||,||,||,||,||,||,||,||,|||-||MIATAINTAKE1|,||,|MIATA INTAKE|,||,||,||,||,||,||,||,||,||,||,|||-||MIINDAKI1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|Miata Interior Custom Dash Kits 1990-2019+|,|GM-MM146-BKC1|,|220.00|,|179.95|,||,||,|0.000 |,||,||,||,|
Miata Interior Custom Dash Kits
Mazda Miata MX-5, 2D Dash Kit by Sherwood®. Sherwood gives you total flexibility in customizing your vehicle interior with dash kits for a wide range of applications. Sherwood uses carefully tested proprietary materials, developed in house specifically for automotive interior trim components, and a finely honed manufacturing procedure to produce top quality components that match each other and factory installed panels perfectly. Their kits are characterized by ease of installation and perfection in fitments and finish.
|,|"Select Year" "Select Here" "1990-1993" "1994-1997" "1999-2000 add(+$20)" "2001-2005 add(+$20)" "2006-2008 add(+$40)" "2006-2008 add(+$40)" "2009-2015 add(+$40)" "2016-2019+ add(+$40)"|-||-|"Select Finish" "Select Here" "Burl Wood" "Red Burl Wood" "Cherry Rose Wood" "Honey Burl Wood" "Classcis Green Camo" "Glossy Silver" "Brushed Metal" "Brushed Aluminum" "Real Black Carbon Fiber add(+$40)" "Black add(+$20)" "White add(+$20)" "Red add(+$20)" "Burgundy add(+$20)" "Yellow add(+$20)" "
Blue add(+$20)" "Pink add(+$20)"|-||-|||-||MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES|,|MIATA INTERIOR PARTS 06-15|,||,||,||,|MAZDA MX-5 MIATA INTERIOR PARTS AND ACCESSORIES
|,||,||,||,||,|20mamiinvial 20mamiinac 20mamiinda 20mamiinstwh 20mamiinbo 20mamiinkn 20mamiinpe 20mamiinsedo 20mamiinau 20mamiinfl 20mamiinstba 20mamiinstba1
|,||,|||-||MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES|,|MIATA INTERIOR PARTS 2016+|,||,||,||,|MAZDA MX-5 MIATA INTERIOR PARTS AND ACCESSORIES
|,||,||,||,||,|20mamiinvial 20mamiinac 20mamiinda 20mamiinstwh 20mamiinbo 20mamiinkn 20mamiinpe 20mamiinsedo 20mamiinau 20mamiinfl 20mamiinstba 20mamiinstba1
|,||,|||-||MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES|,|MIATA INTERIOR PARTS 90-97|,||,||,||,|MAZDA MX-5 MIATA INTERIOR PARTS AND ACCESSORIES
|,||,||,||,||,|View All: insete
Accessories: naaccessories
Dashboard: nadashboard
Steering wheels: nastwh
Boots: naboots
Knobs: naknobs
Pedals: napedals
Seats & Doors: naseatsdoor
Audio: naaudio
Flooring: naflooring
Style Bars: nastylebars
Storage: nastorage
insete naaccessories nadashboard nastwh naboots naknobs napedals naseatsdoor naaudio naflooring nastylebars nastorage
|,||,|||-||MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES|,|MIATA INTERIOR PARTS 99-05|,||,||,||,|MAZDA MX-5 MIATA INTERIOR PARTS AND ACCESSORIES
|,||,||,||,||,|view all: nbinviall
accessories: nbinac1
dashboard: nbinda
steering wheels: nbinstwh
Boots: nbinbo
knobs: nbinkn
pedals: nbinpe
seats & doors: nbinsedo
audio: nbinau
flooring: nbinfl
style bars: nbinstba
storage & bags: nbinstba1
|,||,|||-||JAPOST|,|NBACCESSORIES|,|Miata Jack Point Stickers|,|MC-STICK|,|29.99|,|20.00|,||,||,|0.000 |,||,||,||,| Miata Jack Point Stickers
Identify the location that you can jack the car up with the driver in the car and have both wheels come of the ground and then mark it with these jack point stickers.
The words "jack" are seperate from the arrow, so you can only use the arrow if you don't want the words on the car.
Designed specifically to fit on the miata rocker panel. 6" wide with the letters, (3 1/4" Arrow Only) and 4" Tall.
Made from 3M Contro Tac conformable vinyl, which has air release adhesive making them extremely user friendly and easy to install.
|,|||-||MIJARASUAIRF|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata Jackson Racing Supercharger Air Filter Element (1990-2005)|,|JRG-999-030|,|34.99|,|29.98|,||,||,|0.000 |,||,||,||,|Air filter for the Jackson Racing Supercharger that fits the 1990-2005 Mazda Miata MX-5.
|,|||-||MIJARASUINEL|,|19MAMISUANDU|,|Miata Jackson Racing Supercharger Inlet Elbow (1990-2000)|,|JRG-051-920|,|149.99|,|129.95|,||,||,|0.000 |,||,||,||,|Miata Jackson Racing Supercharger Inlet Elbow (1990-2000)
Save weight and absorb less heat. This plastic rotomolded elbow replaces the aluminum castings previously supplied in all Jackson Racing or Sebring Supercharger Kits.
NOTE: Does NOT include fittings.
|,|||-||MIJARASUOUMA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata Jackson Racing Supercharger Outlet Manifold |,|JRG-999-500|,|129.99|,|99.95|,||,||,|0.000 |,||,||,||,|If your Outlet Manifold does not have a JR logo cast into the top, you have the old design. The new JR Outlet Manifold has been redesigned to provide better airflow and overall aesthetics. Additionally, a lip has been cast into outlet to provide better grip and keep the crossover tube from blowing off. A is 1990-1997, and 1999-2000 is B. For B, can be used on 90-97 for even better flow. On 90-97 some modification to the hood support bracing will be required.
** Sorry this item is no longer available through Jackson Racing **
|,|"Select Year" "1990-1997" "1999-2000"|-||-|||-||MIJARASUSPBE|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Miata Jackson Racing Supercharger Spare Belts (1990-1997)|,|JRG-999-012|,|19.99|,|14.99|,||,||,|0.000 |,||,||,||,|Jackson Racing Supercharger Belt for the Mazda Miata MX-5.
|,|"Select Year" "Select Here" "90-93 (1.6) - With PS With AC add(+$5)" "90-93 With PS, No AC add(+$6)" "90-93 (1.6) - No PS No AC" "94-97 With PS & AC add(+$8)" "94-97 (1.8) - No PS, No AC add(+$3)"|-||-|||-||MIJARASUTH|,|19MAMISUANDU|,|Miata Jackson Racing Supercharger Thermostat|,|JRG-999-022|,|9.99|,|5.95|,||,||,|0.000 |,||,||,||,|Thermostats for the Jackson Racing Supercharger, designed for the Mazda Miata MX-5.
|,|"Please Select" "160 degree" "180 degree add(+$4.00)"|-||-|||-||MAZDA-MX-5-MIATA-KG-WORKS-CLASSICAL-AIR-DUCT-FULL-MESH-TYPE-1A-1989-1997|,|NAEXVIALL|,|Miata KG Works Classical Air Duct Full Mesh Type 1A 1990-1997|,|NA0-47822|,|369.95|,|339.95|,||,||,|0.000 |,||,||,||,|Miata KG Works Classical Air Duct Full Mesh Type 1A 1990-1997
An icon from K.G. Works that has yet to be matched anywhere on the planet. Get cooler air to your engine compartment and look cool at the same time - especially at dusk with your parking lights on! Made with stainless steel mesh to help keep the bugs and other varmints out, these turn signal intakes are function with a whole lot of form mixed in.
The 1A Features a unique U frame that inserts into each opening with a built in (and water-tight) amber lamp. All you do is plug in the OEM Mazda connectors that come with the kit and you're set. K.G. Works does not play games when it comes to hardware - you only get the best. Requires no drilling or extra mods to your bumper.
NOTE: Not to be used with Day Time Running Lights.
Features:
Racy 60s style finish that uses stainless steel rims and stainless steel crimp mesh. The air duct is provided at the most effective position.
|,|||-||MILIPLREBYCO|,|NBBODYSTYLING|,|Miata License Plate Relocation by Cobalt 1990-2005|,|CBT-904-530|,|89.99|,|69.99|,||,||,|0.000 |,||,||,||,|Miata License Plate Relocation by Cobalt
If you have to run a front license plate then you need Cobalt’s license plate mounting kit.
By relocating the license plate you create a unique look and the grille is no longer covered, allowing maximum air flow to the radiator. The mounting kit has 3 height positions to choose from – low, medium and high.
For Mazda Miata Years: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, and 2005
|,|"Select Year" "1990-2005"|-||-|||-||MIMDOBAFORHA|,|BLACKFRIDAYSALE|,|Miata M1 Door Bars for Hard Dog Roll Bars 1990-1997|,|HDG-ADB|,|499.95|,|404.95|,||,||,|0.000 |,||,||,||,|The Bolt-In Door Bars are designed specifically to stiffen the chassis of your Miata. A torsionally stiff chassis will keep a more even load on all wheels to improve traction. The stiffer a chassis, the more likely the vehicle is to have even weight distribution on all tires which is favorable to cornering and superior handling.
The Bolt-In Door Bars are easily installed in all '90-2005 model Miatas in conjunction with any version Hard Dog Roll Bar or even if no roll bar has been installed with minimal interference to normal use of the car.
Additional rear back up plates are required if the door bars are to be used without a roll bar or with our Ace, Deuce or Hard Bar models.
Features include:
* Hardware included for installation with our Hard Core, Sport or Xtreme Roll Bars
* Durable Black Powdercoat finish
* Constructed of high quality 1.5" diam x .120" wall DOM tubing
*Rear Back-up Plates w/ mounting hardware as required to install door bars without a roll bar or in conjunction with Ace, Deuce or Hard Bar models
|,|"Select Rear Back-Up Plates" "No" "Yes add+($45)"|-||-|"Shipping Cost" "add(+$105)"|-||-|||-||MIM2DOBAFORH|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-1999-2005|,|Miata M2 Door Bars for Hard Dog Roll Bars 1999-2005 - Sale! |,|HDG-BDB|,|499.95|,|404.95|,||,||,|0.000 |,||,||,||,|The Bolt-In Door Bars are designed specifically to stiffen the chassis of your Miata. A torsionally stiff chassis will keep a more even load on all wheels to improve traction. The stiffer a chassis, the more likely the vehicle is to have even weight distribution on all tires which is favorable to cornering and superior handling.
The Bolt-In Door Bars are easily installed in all '90-2005 model Miatas in conjunction with any version Hard Dog Roll Bar or even if no roll bar has been installed with minimal interference to normal use of the car.
Additional rear back up plates are required if the door bars are to be used without a roll bar or with our Ace, Deuce or Hard Bar models.
Features include:
* Hardware included for installation with our Hard Core, Sport or Xtreme Roll Bars
* Durable Black Powdercoat finish
* Constructed of high quality 1.5" diam x .120" wall DOM tubing
*Rear Back-up Plates w/ mounting hardware as required to install door bars without a roll bar or in conjunction with Ace, Deuce or Hard Bar models
|,|"Select Rear Back-Up Plates" "No" "Yes add+($55)"|-||-|"Shipping cost" "add(+$115)"|-||-|||-||MA8PEPLWI|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata Magnecor KV85 Competition 8.5mm Performance Plug Wires 1990-2005|,|201-208|,|142.95|,|123.98|,||,||,|0.000 |,||,|adsgagd|,||,|Miata Magnecor 8.5mm Performance Plug Wires
Extremely high quality 8.5mm spark plug wires with stainless steel spiral wound core. These wires completely eliminate all EMI and RFI interference.
If you want to get the MOST power out of your Miata, these wires are a must. Made in USA.
|,|"Select Year" "Select Here" "1990-2000 add(+$10)" "2001-2005"|-||-|||-||MIATA-MAINTENANCE-2016-|,||,|MIATA MAINTENANCE 2016+|,||,||,||,|MAZDA MX-5 MIATA MAINTENANCE PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-MAINTENANCE-PARTS-1990-1993|,|PARTS---PERFORMANCE-MAINTENANCE-PARTS|,|MIATA MAINTENANCE PARTS (1990-1993)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-MAINTENANCE-PARTS-1994-2005|,|PARTS---PERFORMANCE-MAINTENANCE-PARTS|,|MIATA MAINTENANCE PARTS (1994-1997)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-MAINTENANCE-PARTS-1999-2005|,|PARTS---PERFORMANCE-MAINTENANCE-PARTS|,|MIATA MAINTENANCE PARTS (1999-2005)|,||,||,||,||,||,||,||,||,||,||,|||-||PARTS---PERFORMANCE-MAINTENANCE-PARTS-2006-2009|,|PARTS---PERFORMANCE-MAINTENANCE-PARTS|,|MIATA MAINTENANCE PARTS (2006-2009)|,||,||,||,||,||,||,||,||,||,||,|||-||MAPA19|,||,|MIATA MAINTENANCE PARTS 1990-1993|,||,||,||,||,||,||,||,||,||,|
|,|||-||MAPA191|,||,|MIATA MAINTENANCE PARTS 1994-1997|,||,||,||,||,||,||,||,||,||,|
|,|||-||MIMAHAHO19|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1999-2005|,|Miata Manual Hardtop Hoist|,|IMC-MMH03|,|119.99|,|109.95|,||,||,|0.000 |,||,||,||,|The Miata Manual Hardtop Hoist makes easy work of what used to be backbreaking labor, allowing one person to easily lift, lower and position the top in a matter of minutes.
The Miata harness is sewn from one inch nylon webbing. It was Designed in 1989 for Mazda of North America with help of their engineers in Irvine, CA. The harness utilizes the Mazda hardtop attachment hardware to be spread the width of the hardtop for maximum stability.
NOTE: Actual Hard Top not included
|,|"SELECT YEAR" "Select Here" "1990-2005"|-||-|||-||MIMIALRA191|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata Mishimoto Aluminum Radiator 1999-2005|,|MMRAD-MIA-9905|,|320.00|,|271.90|,||,||,|5.000 |,||,||,||,|Miata Mishimoto Aluminum Radiator 1999-2005
Whether you're a daily driver searching for a dependable quality upgrade from your current OEM radiator, or you’re a devoted racer who needs a lightweight, high-performance radiator, Mishimoto has just what you're looking for. Many drivers overlook the importance of having a high-quality aluminum radiator installed, yet it is one of the most important components in your vehicle's engine. Mishimoto radiators are designed to efficiently reduce the heat from vital areas. Made with 100% brazed aluminum for a clean OEM fit, our aluminum radiators ensure excellence and a lifetime of efficient cooling. Perfect for any turbocharged, supercharged, or nitrous-oxide engine. Check out our silicone hose kits, a perfect match with our aluminum radiators.
An ideal upgrade to the stock OEM radiator, the Mishimoto aluminum radiator will give your Miata a cooler, more efficient running engine.
For Mazda Miata Years: 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|||-||MIMPHIFLOUMA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata MP62 High Flow Outlet Manifold Upgrade for BRP Supercharger |,|JRG-999-821|,|169.99|,|149.95|,||,||,|0.000 |,||,||,||,|Miata MP62 High Flow Outlet Manifold Upgrade for BRP Supercharger
BRP Supercharger owners, want an extra 10 HP? Our new high flow outlet manifold underwent hours of design and flow testing. Our engineers needed to find the right balance of volume and air speed and as you can see by the dyno, they were successful. Comparing our Moss' manifold to the BR Performance manifold, our Miata gained 10 HP. Upgrade your BR Performance to our manifold today, it is a direct replacement. Fits the 1990-2005 Mazda Miata MX-5 w/BRP Supercharger.
|,|||-||GS-NC-SR-V1-XL|,|20MAMIINSEDO|,|Miata MX-5 Bucket Seat Mounts Rails 2006-2015|,|NC-SMR|,|349.99|,|294.02|,||,||,||,||,||,||,|Miata MX-5 Bucket Seat Mounts Rails 2006-2015
Low profile, universal bucket seat mount for Mazda MX-5 NC. For left or right side of the car.
Main benefits:
Low profile – allow installing bucket seat as low as possible
Fit with all the bucket seats with side mounting points
Big left-right adjustment – thanks to slotted holes used in the upper mounts
Big front-rear adjustment – left mount can be swapped with the right one resulting in the biggest adjustment range on the market
Equipped with mounting points for crotch part of racing harness
Key Features:
Made of E355, 3mm steel
Laser-cut, CNC bent
Powdercoated to metallic graphite
100% bolt-on solution
3D cad designed
100% made in the EU
In the package you get:
Two side mounts
Lower plate
Set of bolts and nuts
|,|||-||MINELIRECOKI|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Miata Neon Light Remote Control Kit|,|PSL-NEONREMOTECONTROL|,|24.95|,|19.95|,||,||,|0.000 |,||,||,||,|Miata Neon Light Remote Control Kit.
Neon Remote Control kit Easily wires into any neon kit. Can be used for other purposes. Easy 2 wire installation.
This is for neon kits Only, will not work with LEDs.
|,|||-||MIATA-OEM-OTHER-PARTS-1990-1997|,||,|MIATA OEM ALL OTHER PARTS 1990-1997|,||,||,||,|MIATA OEM ALL OTHER PARTS 1990-1997|,||,||,||,||,||,||,|||-||MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,||,|MIATA OEM ALL OTHER PARTS 1999-2005|,||,||,||,|MIATA OEM ALL OTHER PARTS 1999-2005|,||,||,||,||,||,||,|||-||MIATA-OEM-ALL-OTHER-PARTS-2006-2015|,||,|MIATA OEM ALL OTHER PARTS 2006-2015|,||,||,||,|MIATA OEM ALL OTHER PARTS 2006-2015|,||,||,||,||,||,||,|||-||MIATA-OEM-ALL-OTHER-PARTS-2016-|,||,|MIATA OEM ALL OTHER PARTS 2016+|,||,||,||,|MIATA OEM ALL OTHER PARTS 2016+|,||,||,||,||,||,||,|||-||MIATA-OEM-EXTERIOR-PARTS-1990-1997|,||,|MIATA OEM EXTERIOR PARTS 1990-1997|,||,||,||,|MIATA OEM EXTERIOR PARTS 1990-1997|,||,||,||,||,||,||,|||-||MIATA-OEM-EXTERIOR-PARTS-1999-2005|,||,|MIATA OEM EXTERIOR PARTS 1999-2005|,||,||,||,|MIATA OEM EXTERIOR PARTS 1999-2005|,||,||,||,||,||,||,|||-||MIATA-OEM-EXTERIOR-PARTS-2006-2015|,||,|MIATA OEM EXTERIOR PARTS 2006-2015|,||,||,||,|MIATA OEM EXTERIOR PARTS 2006-2015|,||,||,||,||,||,||,|||-||MIATA-OEM-EXTERIOR-PARTS-2016-|,||,|MIATA OEM EXTERIOR PARTS 2016+|,||,||,||,|MIATA OEM EXTERIOR PARTS 2016+|,||,||,||,||,||,||,|||-||MIATA-OEM-INTERIOR-PARTS-1990-1997|,||,|MIATA OEM INTERIOR PARTS 1990-1997|,||,||,||,|MIATA OEM INTERIOR PARTS 1990-1997|,||,||,||,||,||,||,|||-||MIATA-OEM-INTERIOR-PARTS-1999-2005|,||,|MIATA OEM INTERIOR PARTS 1999-2005|,||,||,||,|MIATA OEM INTERIOR PARTS 1999-2005|,||,||,||,||,||,||,|||-||MIATA-OEM-INTERIOR-PARTS-2006-2015|,||,|MIATA OEM INTERIOR PARTS 2006-2015|,||,||,||,|MIATA OEM INTERIOR PARTS 2006-2015|,||,||,||,||,||,||,|||-||MIATA-OEM-INTERIOR-PARTS-2016-|,||,|MIATA OEM INTERIOR PARTS 2016+|,||,||,||,|MIATA OEM INTERIOR PARTS 2016+|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|MIATA OEM MAINTENANCE PARTS 06-15|,||,||,||,|MAZDA MX-5 MIATA MAINTENANCE PARTS AND ACCESSORIES 2006-2015|,||,||,||,||,||,|
|,|||-||MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2016|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|MIATA OEM MAINTENANCE PARTS 16-23+|,||,||,||,|MAZDA MX-5 MIATA MAINTENANCE PARTS AND ACCESSORIES 2016|,||,||,||,||,||,|
|,|||-||MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|MIATA OEM MAINTENANCE PARTS 90-97|,||,||,||,|MAZDA MX-5 MIATA MAINTENANCE PARTS AND ACCESSORIES|,||,||,||,||,|19mamimaveal mapa19 mapa191
|,||,|||-||MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|GENUINE-MAZDA-MX5-MIATA-OEM-PARTS-NA-NB-NC-ND|,|MIATA OEM MAINTENANCE PARTS 99-05|,||,||,||,|MAZDA MX-5 MIATA MAINTENANCE PARTS AND ACCESSORIES 1999-2005|,||,||,||,||,||,|
|,|||-||OWNERS-SHOWCASE|,|DONTMISS|,|MIATA OWNER SHOWCASE|,||,||,||,||,||,||,||,||,||,||,|||-||MIATA-OXYGEN-SENSOR-RACE-HEADER-EXTENSION-KIT-1999-2005|,|19MAMIEXVEAL1|,|Miata Oxygen Sensor Race Header Extension Kit 1999-2005|,|NAB-7262|,|222.90|,|88.95|,||,||,|0.000 |,||,||,||,|Miata Oxygen Sensor Race Header Extension Kit 1999-2005
These handy wiring kits are useful for both 2001-2005 manifold conversion for 1999-2000 Mazda MX-5 Miata's, as well as race header installations for all years.
Features OEM Connectors, Include optional o2 sensor weld on bong.
|,|||-||MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES|,|MIATA PERFORMANCE 06-15|,||,||,||,|MAZDA MX-5 MIATA PERFORMANCE PARTS AND ACCESSORIES
|,||,||,||,||,|20mamienpevi1 20mamienpepa 20mamienpeai1 20mamienpeco 20mamienpeig 20mamienpesu 20mamipeclfl 20mamienpeoi 20mamienpeca
|,||,|||-||MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES|,|MIATA PERFORMANCE 2016+|,||,||,||,|MAZDA MX-5 MIATA PERFORMANCE PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES|,|MIATA PERFORMANCE 90-97|,||,||,||,|MAZDA MX-5 MIATA PERFORMANCE PARTS AND ACCESSORIES
|,||,||,||,||,|enpe19 enpe191 19mamienpeai 19mamienpeco 19mamienpeig 19mamienpesu 19mamipeclfl 19mamienpeoi 19mamienpeca
|,||,|||-||MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES|,|MIATA PERFORMANCE 99-05|,||,||,||,|MAZDA MX-5 MIATA PERFORMANCE PARTS AND ACCESSORIES
|,||,||,||,||,|19mamienpevi 19mamiairfia 19mamipepa 19mamirahobe 19mamiplwico 19mamisuandu 19mamiclandf 19mamienpeoi1 19mamienpeca1
|,||,|||-||POLSSBRAKLIG|,|NBBODYSTYLING|,|Miata Polished SS Brake Light Bezel 1999+|,|501-201|,|69.99|,|42.95|,||,||,|0.000 |,||,||,||,|
Add a beautiful accent to your Miata with this polished stainless steel third Brake Light bezel.
The Miata Polished SS Brake Light Bezel fits model years 1990-2005
|,|"Please Select Year" "99+"|-||-|||-||MIATAQUOTES|,||,|MIATA QUOTES|,||,||,||,||,||,||,||,|sfgasdgas|,||,|
"Fresh from its 2006 remake, the two-seat MX-5 Miata roadster continues to capture the hearts of driving enthusiasts and open-air aficionados everywhere. The lightweight roadster may not be big on horsepower, but its 50/50 front-to-rear weight distribution, dynamic suspension and lightening-quick steering make it a blast to drive, while its excellent fuel economy makes it the perfect commuter car. Despite its small proportions, the MX-5 is easy to live with. The top, for example, can be operated from inside the car with just one arm and, when retracted, collapses into a small well behind the seats, as does the new available power-operated hardtop. As a result, the MX-5's small trunk is unaffected by the top's position, a claim cars such as the Pontiac Solstice can't make." - KBB.com
"The third-generation car continues the trend. It still changes direction like a go-kart, communicates clearly to the driver and accelerates with an inspiring inline-4 growl. If you're in the market for an affordable car that provides plenty of top-down, open-road thrills, we highly recommend putting a new or used Mazda Miata on your list." - Edmonds.com
"Overall: ***** The rare five-star vehicle." - Jalopnik Reviews: 2007 Mazda MX-5 Miata Power Retractable Hardtop
"Technophiles will have lots of fun driving the 2006 Mazda MX-5 Miata on weekends but may get bored due to the average audio quality and the lack of electronics integration during daily drives." - CNet.com
"The 2006 Mazda MX-5 Miata exhibits great handling and power. The six-speed manual gearbox gives the driver lots of options, and its low price makes it a great value." - CNet.com
"If brutal winters make owning a soft-top car a nightmare, the MX-5's new retractable hardtop is a dream come true. The MX-5's excellent fuel economy makes it a viable commuter car for those looking to leave their gas-thirsty SUVs at home. Driving enthusiasts and SCCA members love its wonderful handling and overall nimble performance." - KBB.com
"Think it through and you should realize what Miata owners knew all along: this car is invincible in terms of fun-for-the-buck, especially over time." - Automotive.com
"Few automobiles remain as perfect after a dozen years and only two generations, and few so closely to their original design and engineering briefs. - Automobile Magazine 2/02
"Why mess with success? The Miata's concept and brilliant execution as an attainable, approachable, and utterly fantastic sports car are as relevant in 2002 as they were in 1989."
- Automobile Magazine 2/02
"Indeed, cars that give their drivers such joyful sensations are perhaps more important now than ever." - Automobile Magazine 2/02
The essence of the Miata has remained the same lo these many years: a lightweight, rigid, rear-wheel-drive chassis; quick steering and athletic reflexes; a finely calibrated manual transmission; and a modest yet refined four-cylinder engine. Throw in a couple of bucket seats and an exposed sky, and you have a stellar sports car, one that's immensely rewarding to drivers of any skill level." - Automobile Magazine 2/02
"No competitor had equaled the Miata's pureness of spirit, at least not at this price."
- Automobile Magazine 2/02
"The Miata is still the best formula for a roadster that puts driving pleasure before all else, with reliability, practicality, and beauty in the bargain." - Automobile Magazine 2/02
"The Miata has been an Automobile Magazine All-Star for twelve years" 1990 - 2002. Note, not consecutive as there was no 1998 model. Also note that the Miata was the only vehicle to ever win the "All-Star" twelve times.
"Most Fun" - Convertibles $25,000 & Below - Motor Trend 8/01
"Emphasizing the driving experience." - Road & Track 11/00
"One of the Five Best Convertibles under $25,000" - Road & Track 7/01
Note: "One of" because the MR2 Spyder was the other.
"We all concur that Mazda has done a fantastic job of staying honest to the original concept, yet improving the car along the way." - Road & Track 7/01
"After all these years, the Miata has maintained its fun, agile and tossable personality, and has stayed honest to the original concept...it's still a blast to drive." - Road & Track 7/01
"Still, the 2001 Miata is a great bang-for-the-buck, a blast to drive, with one-make that two-of the best-shifting manual transmissions in the business." - AutoWeek 8/3/01
"...excellent handling and a low, thrilling ride that's ideal for enjoying low-speed twisty roads on sunny days. The Miata's handling feels well connected to the road in an almost go-kart-like fashion. - TheCarConnection.com 2001 Buyer's Guide
"We still can't get enough of this always fun-to-drive Japanese roadster" - Edmunds.com
"And when the car is totally redesigned for the third generation, maybe we'll just have to add another one to our long-term fleet. Gee, what a bummer that would be." - Edmunds.com
"People need to make the Miata their fun car, if for nothing more than a stress-reliever." - Edmunds.com
"It's still the number one roadster in our book." - Automobile Magazine Buying and Leasing 2001
"The 2002 Miata is an Automobile Magazine All-Star." Note: 12th time, the only vehicle to be bestowed this title as much.
"There is no other sports car that offers the same combination of engaging personality, practicality, affordability, and sheer driving pleasure." - Automobile Magazine 2/01
"...the Miata is the best all-around package." - Automobile Magazine 2/01
"a shining testament to Mazda's new 'Dynamic DNA' philosophy, which states that all Mazda vehicles be fun to drive and 'share oneness between car and driver." - Road & Track 11/00 (note: was plural as this statement was made for both the Millenia and Miata).
"The extraordinary feedback and dartability you get from the Miata are still alive and well, steering reactions are as sharp as ever, and, in this superbly balanced sportster, a big-smile tail slide is only a decent corner away." - Automobile Magazine 11/00
"The Miata exhibits body stiffness that's truly remarkable for a roadster."
- Road & Track 11/00
"The Miata remains rock-solid stable through all types of turns, with its double-wishbone suspension (with firmer shocks) providing minimal body roll and flawless balance." - Road & Track 11/00
"Its inherent simplicity makes it stand out all the more." - Automobile Magazine 5/00
"Break down the idea of the sports car into its essential elements, and you see the Miata has them all." - Automobile Magazine 5/00
"The Miata provides everything you need in a sports car and nothing you don't." - Automobile Magazine 5/00
"The Miata's sports car purity has kept it a fixture on our All-Stars list year after year." - Automobile Magazine 5/00
"This is a car you can push to its handling limits again and again, all
while improving your driving skills and having a hoot." -Automobile
Magazine Buying and Leasing 2000
"For a little over $20,000 the base Miata offers all the fun you could want while costing so little that it might just be a rational purchase." - Automobile Magazine Buying and Leasing 2000
"Today, more than 500,000 Miatas around the world have made it something of a classic in its own right." - Road & Track 6/00
"With a perfect 50/50 weight distribution, a hassle-free convertible top equipped
with a glass rear window with defroster, and razor-sharp handling, the Miata is the most fun roadster you can buy for less than 30 grand." - Edmunds.com
"When the Mazda MX-5 Miata roadster debuted in 1989, this snazzy little convertible was an instant hit. Marking a revival of the affordable roadster format that was once dominated by British automakers, the Mazda Miata introduced a modern approach to reliability and engineering. Buyers lined up outside Mazda dealerships and gladly paid sticker price-plus-some for the fetching new Miata." - Edmunds.com
www.GoMiata.com
|,|||-||HARDTOPCARRIER|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-HARDTOP-2016|,|Miata Removable Hardtop Carrier|,|AZ-hardtop|,|299.99|,|169.95|,||,||,|5.000 |,||,||,||,|This rolling cart is great for storing and moving your removeable hardtop.
These Hardtop Stands allow convenient vertical storage of your precious convertible hardtop. Our latest design includes a securing harness, which provides stability whilst maneuvering the hardtop on its storage cart. Supplied with double-wheel, lockable castors and support padding, these carts work exceptionally well with heavy hardtops, and are an ideal storage solution.
|,|"Shipping & Handling" "add(+$59)"|-||-|||-||MIREPA2|,||,|MIATA REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,||,|||-||MIREPA1|,||,|MIATA REPLACEMENT PARTS|,||,||,||,||,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-ROLL-BARS-SAFETY-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA ROLL BARS & SAFETY|,||,||,||,|MAZDA MX-5 MIATA ROLL BARS, SAFETY PARTS AND ACCESSORIES
|,||,||,||,||,|19mamirobasa parts---performance-roll-bars---safety-boss-frog parts---performance-roll-bars---safety-hard-dog safety 19mamirobasa1 19mamirobasa2
|,||,|||-||MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA ROLL BARS & SAFETY|,||,||,||,|MAZDA MX-5 MIATA ROLL BARS, SAFETY PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA ROLL BARS & SAFETY|,||,||,||,|MAZDA MX-5 MIATA ROLL BARS, SAFETY PARTS AND ACCESSORIES
|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA ROLL BARS & SAFETY|,||,||,||,|MAZDA MX-5 MIATA ROLL BARS, SAFETY PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||MICHPL19|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata Scuff Plates 1990-1997|,|401-400|,|199.99|,|154.02|,||,||,|0.000 |,||,||,||,|Miata Scuff Plates 1990-1997. Durable, stylish aluminum plates help protect the doorsills from scuffing. They are brushed top finish with a matte recessed area. These Miata Scuff Plates are easy to installion.
|,|||-||MICHPL191|,|NBINAC1|,|Miata Scuff Plates 1999-2005|,|401-401|,|199.99|,|139.95|,||,||,|0.000 |,||,||,||,|Miata Scuff Plates 1999-2005. Durable, stylish aluminum plates help protect the doorsills from scuffing. They are brushed top finish with a matte recessed area. These Miata Scuff Plates are easy to installion.
|,|||-||MISECORETAN1|,||,|Miata Seat Covers Regal Tan 1990-1997|,|BARMSC001|,|199.99|,|99.95|,||,||,|0.000 |,||,||,||,|Whether you want to protect new seats or cover older ones, our Miata Seat Covers will guard against wear and tear while keeping your Miata seats cooler in summer and warmer in winter!
These are not your standard "One-Size Fits All" seat covers. These are made especially for us, patterned after the miata seats and made to fit very well. Precision patterns and the finest materials are used to ensure a premium look. All materials also feature a durable foam backing.
Available in 5 different Styles! Price is for the Pair.
*Plush Regal- Soft velour with a distinctive OEM pin-dot pattern. Looks & feels like factory seats. Classic finish for an upscale look.
Heavy Duty Tweed (Pictured above)- Durable, sturdy fabric. Outstanding fit and finish.
Neo Supreme- Water resistant fabric. Bright vibrant colors. Soft comfort.
Popular Prints - Wild animal and other popular patterns. Soft stain resistant fabrics.
New Plush Regal
Heavy Duty Tweed
Neo Supreme
Popular Prints
* This item is final sale. No Returns or exchanges for this item. *
|,|||-||MISECOTWBL191|,||,|Miata Seat Covers Tweed Black 1999-2005|,|BARMSC003|,|199.99|,|99.95|,||,||,|0.000 |,||,||,||,|Whether you want to protect new seats or cover older ones, our Miata Seat Covers will guard against wear and tear while keeping your Miata seats cooler in summer and warmer in winter!
These are not your standard "One-Size Fits All" seat covers. These are made especially for us, patterned after the miata seats and made to fit very well. Precision patterns and the finest materials are used to ensure a premium look. All materials also feature a durable foam backing.
Available in 5 different Styles! Price is for the Pair.
*Plush Regal- Soft velour with a distinctive OEM pin-dot pattern. Looks & feels like factory seats. Classic finish for an upscale look.
Heavy Duty Tweed (Pictured above)- Durable, sturdy fabric. Outstanding fit and finish.
Neo Supreme- Water resistant fabric. Bright vibrant colors. Soft comfort.
Popular Prints - Wild animal and other popular patterns. Soft stain resistant fabrics.
New Plush Regal
Heavy Duty Tweed
Neo Supreme
Popular Prints
* This item is final sale. No Returns or exchanges for this item. *
|,|||-||MISHSHBYCO2|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2016|,|Miata Short Shifter by Cobalt 2006-2023|,|CBT-994-060|,|199.99|,|184.98|,||,||,|0.000 |,||,||,||,|Miata Short Shifter by Cobalt 2006-2023
The Miata has a great gearbox, but we have succeeded in making it even sportier!
Our Sport Shift Kit reduces shift throw by 25%. Shifting is even easier with a simple flick of the wrist. To ensure OEM quality and performance we re-use the factory Mazda parts with our Sport Shifter.
Complete with instructions and ready to install. Shift knobs sold separately, or reuse your stock knob.
|,|"Select Year" "Select Here" "2006-2015 6-Speed Manual Trans" "2016-2023 6-Speed Manual Trans"|-||-|||-||MISHSHKITBYC|,|19MAMIDRCLFL|,|Miata Short Shifter Kit by Cobalt (1990-2005)|,|CBT-994-000|,|189.99|,|158.98|,||,||,|0.000 |,||,||,||,|Miata Short Shifter Kit by Cobalt (1990-2005)
The Miata has a great gearbox, Cobalt has succeeded in making it even sportier! Cobalt’s zinc-plated billet steel sport shift kit reduces shift throw by 25% and can take the constant yanking and jerking unlike billet aluminum shifters that have been known to break.
Shifting is even easier with a simple flick of the wrist. To ensure OEM quality and performance they supply a new dust boot, bushing and washers with their sport shifter. Complete with instructions and ready to install.
Knob sold separately, or reinstall your stock knob. Fits 90-01 all,
02-05 5 speed only.
|,|||-||MISHSH2|,||,|MIATA SHORT SHIFTERS|,||,||,||,||,||,||,||,||,||,||,|||-||MISHSH1|,||,|MIATA SHORT SHIFTERS|,||,||,||,||,||,||,||,||,||,||,|||-||MISIWIBLRE18|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Silicone Wiper Blade Refill 18" (450Mm) Refill (1990-2007) by PIAA|,|PIAA-94045|,|18.99|,|12.99|,||,||,|0.000 |,||,||,||,|Refill for the PIAA silcon wipers. Price if for one wiper. Upgrade your factory wipers. PIAA wiper refills will also fit some original equipment and other manufacturers' wiper blades. Check with your PIAA Wiper Blade dealer for details.
|,|||-||MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA SOFT TOPS|,||,||,||,|MAZDA MX-5 MIATA SOFT TOPS 1990-2015|,||,||,||,||,|gahhsofttops
accessories-tops--tonneaus---boots-soft-top
rosoto
accessories-tops--tonneaus---boots-hard-top
|,|
|,|||-||MAZDA-MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA SOFT TOPS|,||,||,||,|MAZDA MX-5 MIATA SOFT TOPS 1990-2005|,||,||,||,||,|gahhsofttops
accessories-tops--tonneaus---boots-soft-top
rosoto
accessories-tops--tonneaus---boots-hard-top
|,|
|,|||-||MAZDA-MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA SOFT TOPS|,||,||,||,|MAZDA MX-5 MIATA SOFT TOPS 1990-2015|,||,||,||,||,||,|
|,|||-||MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA SOFT TOPS|,||,||,||,|MAZDA MX-5 MIATA SOFT TOPS 1990-2015|,||,||,||,||,|gahhsofttops
accessories-tops--tonneaus---boots-soft-top
rosoto
accessories-tops--tonneaus---boots-hard-top
|,|
|,|||-||MISPPLWIBYJA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata Spark Plug Wires by Jackson Racing (1990-2000)|,|JRG-971-510|,|69.99|,|59.95|,||,||,|0.000 |,||,||,||,|Made exclusively for Jackson Racing and using only the highest quality, state of the art materials. Check out the extensive list of features:
* Outer sheath made from 8mm silicone which resists high temperatures and chemical
* Fiberglass Braid provides superior pull strength
EPDM layer provides superior insulation to 'silicone to silicone' wires
* Polymer Conductive coating protects conductor for better contact
* Monel Conductor for maximum conductivity
* Ferrite impregnated core for superior EMI suppression
* Aramid fibers for superior tensile strength
|,|||-||SPDYALRARA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Miata Springfield Dyno Aluminum Race Radiator|,|MC-SDAR|,|699.99|,|575.00|,||,||,|10.000 |,||,||,||,| Miata Springfield Dyno Aluminum Race Radiator
This is a true cross-flow radiator which channels the water from side to side multiple times ensuring a substantially longer cooling time in the radiator and pulling even more heat out of the cooling system.
Three main attributes for this radiator are:
* Reduced cooling system operating temperature. We have consistently seen 20-30 degrees cooler temperatures running this new radiator vs a 54mm Koyo radiator.
*Reduced intake system air temperatures. During controlled dyno tests, we have seen 15-20 degree drops on intake air temps.
* Reduced weight off the nose of the car. Compared to the Koyo, this new radiator weighs approx. 2.5lbs less when fully filled.
* Lower water and intake temperatures. The simple facts are that if you keep the coolant temps below 190 degrees, you are going to make more power. Also, if the intake air temp is cooler, you will also make more power.
This is the biggest, baddest radiator you can stuff in a Miata! This is really one of the must haves if you want to make power for a whole National race distance, even tucked up in a tight draft. Make sure if you spend the money to get this radiator, you add one of our Stainless Steel grille cover to protect that investment.
|,|"Select Year" "Select Here" "1990-1993 1.6L" "1994-1997 1.8L" "1999-2005 1.8L"|-||-|"Shipping cost" "add(+$69)"|-||-|||-||MISTSTENSHBY|,|NBBODYSTYLING|,|Miata Stainless Steel Engine Shield 1990-2005|,|CBT-907-305|,|209.99|,|159.95|,||,||,|0.000 |,||,||,||,|Miata Stainless Steel Engine Shield 1990-2005
The Miata comes with a flimsy plastic engine undershield that is prone to deterioration and cracking. Once this factory piece is compromised dirt, debris and excessive amounts of water can get on your engine and belts leading to increased maintenance.
The other function of an engine undershield is to direct air through your radiator and condenser and not let it escape under them.
Cobalt engineers have developed a replacement shield to protect your engine, radiator, oil sump and all other vital engine parts from damage.
Using stainless steel construction to ensure it is a rock solid addition to your Miata, the Cobalt engine shield will perform the same functions as your original undershield - only better.
The Cobalt shield reuses your factory bolts and screws. Upgrade to the bright kit to really finish off the beautiful look. Kit includes zinc-coated metric hardware to replace those grungy OEM bolts.
|,|"Need New Bolts and Screws?" "No thanks, I will used by old ones" "Yes, I like Bright Bolts and Screws add(+$8.99)" "Hardware Kit - 1999-2000 with AC add(+$33.99)"|-||-|||-||MISTSTENSHBY1|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Stainless Steel Engine Shield by Cobalt 2006-2015|,|CBT-907-303|,|209.99|,|179.95|,||,||,||,||,||,||,|Miata Stainless Steel Engine Shield by Cobalt 2006-2015
The Miata comes with a flimsy plastic engine undershield that is prone to deterioration and cracking. Once this factory piece is compromised dirt, debris and excessive amounts of water can get on your engine and belts leading to increased maintenance. The other function of an engine undershield is to direct air through your radiator and condenser and not let it escape under them.
Cobalt engineers have developed a replacement shield to protect your engine, radiator, oil sump and all other vital engine parts from damage. Using stainless steel construction to ensure it is a rock solid addition to your Miata, the Cobalt engine shield will perform the same functions as your original undershield - only better.
|,|||-||STAINSTEELSI|,|FRSHCFORDE|,|Miata Stainless Steel Side Light Bezels- FREE SHIPPING|,|501-208|,|94.99|,|85.95|,||,||,|0.000 |,||,||,||,|
Add a custom look to your Miata with these stainless steel corner lights bezels. This set comes complete with all 4 bezels and 8 polished stainless steel screws.
The Miata Stainless Steel Side Light Bezels fits model years 1990-2005
|,|||-||MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA SUSPENSION|,||,||,||,|MAZDA MX-5 MIATA SUSPENSION PARTS AND ACCESSORIES
|,||,||,||,||,|20mamisuands 20mamisuands1 20mamisuands2 20mamisuands3 20mamisuands4 20mamisuands5
|,||,|||-||MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA SUSPENSION|,||,||,||,|MAZDA MX-5 MIATA SUSPENSION PARTS AND ACCESSORIES
|,||,||,||,||,|19mamisuands 19mamisuands1 19mamisuands2 19mamisuands3 19mamisuands4 19mamisuands5
|,||,|||-||MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA SUSPENSION|,||,||,||,|MAZDA MX-5 MIATA SUSPENSION PARTS AND ACCESSORIES
|,||,||,||,||,|19mamisuands6 19mamisuands7 19mamisuands8 19mamisuands9 19mamisuands10 19mamisuands11
|,||,|||-||MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA SUSPENSION |,||,||,||,|MAZDA MX-5 MIATA SUSPENSION PARTS AND ACCESSORIES 2016|,||,||,||,||,||,||,|||-||MITEUPBE|,|19MAMISUANDU|,|Miata Tensioner Upgrade Belt |,|JRG-999-822|,|19.99|,|17.98|,||,||,|0.000 |,||,||,||,|Tensioner Belt Only
This belt is to be used for the JR Supercharger Tensioner.
|,|"Select Type" "Select Here" "90-93 w/PS & AC, stock boost" "90-93 w/PS, No AC, stock boost" "90-93 w/PS, No AC, Stock boost" "94-97 w/PS & AC, big boost add(+$2)" "94-97 w/PS & AC, big boost" "99-05 w/PS & AC, stock boost add(+$2)"|-||-|||-||TOWHOOKS9097|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Miata Tow Hooks 1990-1997|,|MC-TH1|,|69.99|,|54.45|,||,||,|0.000 |,||,||,||,| Miata Tow Hooks 90-97
Required by SCCA, NASA and other sanctioning bodies. Fits 1990-1997 Mazda Miata's.
(March 2018 New Design) MiataCage designed and manufactured NA Miata tow hook.
These tow hooks were designed to properly fit the NA Miata. The old version we uses to see was just a tow hook that was straight down and only pickup up 2 of the orignial 4 factory mounting locations and those 2 poitns are in the same plane.
We designed a rear tow hook that has been improved in many ways:
- It is shorter and curves backwards to fit right underneath the bumper to make it easier to see and use.
- It utilizes 3 of the factory tow hook bolt in points in 2 separate plains.
- It has a provision to tie the car down in the trailer. (Coming Soon)
- One of the issues with the old style tow hook was that if you tried to tow the car down in the trailer with it, the hooks would bend.
- We have added more material around the perimeter of the large hole for better strength and longevity.
- Powdercoated bright Red for visibility.
|,|"Add Tow Stickers" "Select Here" "No" "Yes add(+$15.00)"|-||-|||-||TOWHOOKS9905|,|19MAMISUANDS6|,|Miata Tow Hooks 1999-2005|,|MC-TH2|,|79.99|,|54.45|,||,||,|0.000 |,||,||,||,| Miata Tow Hooks 1999-2005
Bolt on Tow Hooks for your 1999-2005 Miata.
Laser cut from .1875" thick steel, these Red powder coated tow hooks bolt on to the car replacing one of front and rear existing factory tow hooks.
Minor drilling required for 1999-2005 model cars.
|,|||-||TRDOGRA20MIW|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Track Dog Racing Air Splitter 2001-2005 with Factory Air Dam|,|TDR-01M121|,|109.00|,|99.00|,||,||,|5.000 |,||,||,||,|Miata Track Dog Racing Air Splitter 2001-2005 with Factory Air Dam
Extends 1.25" around the two corners of the factory air dam. Includes all mounting hardware; requires factory air dam.
At speed the Track Dog Racing Air Splitter increases the down force on the front of your Miata lowering the center of gravity and giving the front tires more grip. As oncoming air hits the front of your Miata it creates a high pressure zone. The air splitter sends the majority of this high pressure air over and around your Miata to give it down force. The air that does go under your Miata has to increase in velocity which creates a low pressure area to further increase the down force. The air splitter also defends your Miata’s front end against scraping and dings. Made from 1/16” think, high-impact ABS plastic and built to take a surprising amount of abuse. Splitter extends 1.75” at the out edges and 1” below the radiator opening. Includes all mounting hardware. Recommend painting the splitter for best appearance. For use with the factory front lower spoiler only.
|,|||-||TURSIGINKIT|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Miata Turn Signal Induction Kit 1990-1997|,|903-201-903-202|,|169.99|,|129.98|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Mazda Miata Turn Signal Induction Kit 1990-1997
BACK IN STOCK!! Limited quantities, order now!
If you want a great look and improved performance from your Miata, take a look at this TSI kit. We have these installed on our company Miata and they truly make a huge difference in cooling down intake and underhood temperatures.
These work especially well with performance intakes not to mention supercharged and turbo Miatas.
This kit comes unpainted. Price is for the pair.
Will not work on Canadian cars with day time running lights.
|,|"Select Style" "Select Here" "Turn Signal Induction with LED Lights add(+$60)" "Turn Signal Induction with Incandescent Lights"|-||-|||-||MI2PC12PINEI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata Two Piece 18" Pink Neon Interior Kit|,|PSL-2PCPINKNEONKIT|,|54.95|,|34.05|,||,||,|0.000 |,||,||,||,|Miata 2 Piece 18" Pink Neon Interior kit
Brand new PINK neon interior kit 2pc Miata KIT !!! LOOK NO FURTHER, THIS IS THE BEST KIT ON THE MARKET. THIS IS THE PERFECT KIT TO INSTALL UNDER YOUR DASH, SEATS, OR JUST ABOUT ANYWHERE IN YOUR VEHICLE!! THIS IS THE BRIGHTEST AND MOST DURABLE KIT AND INCLUDES THE FOLLOWING: two 18" PINK NEON TUBES! 3/4"
TUBES MAKE THEM EASY TO HIDE THE TRANSFORMER BUILT INTO EACH TUBE. NEON TUBES ARE ENCLOSED IN A WATER RESISTANT HIGH IMPACT ACRYLIC TUBE. CIGARETTE LIGHTER ADAPTER (CAN ALSO BE HARD WIRED). THESE WILL WORK ON ANY FOREIGN OR DOMESTIC VEHICLE. BRAND NEW IN THEIR ORIGINAL PACKAGING.
This is the uprgaded 2007 model, that stands out from all others, and this is the kit that won all the awards at the National Import Auto Show in San Diego, and it can be yours today!!! FULL LIFETIME WARRANTY.
|,|||-||ULSTREETIGWI|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata Ultra Street Ignition Wires 1990-2000|,|51003|,|120.99|,|110.00|,||,||,|0.000 |,|Usually ships the next business day|,||,||,|Miata Ultra Street Ignition Wires
These Ultra Street Ignition wires were tested by Miata Magazine which stated, "The preferred choice for performance was the Racing Beat wires. On a dyno, the wires actually provided 1.5 horsepower. In addition, the acceleration and engine response was crisper than the other wires."
If you are truly looking for the ultimate performance wires for your Miata, look no further than ULTRA.
For Miata Years 1990-1993 and 1994-2000. Please make sure you select the correct year of your Miata.
|,|"For Years" 90-93 94-00|-||-|||-||ULSTREETIGWI1|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Miata Ultra Street Ignition Wires 2001-2005|,|151-007|,|119.00|,|103.90|,||,||,|0.000 |,||,||,||,|These Miata Ultra Street Ignition wires were tested by Miata Magazine which stated, "The preferred choice for performance was the Racing Beat wires. On a dyno, the wires actually provided 1.5 horsepower. In addition, the acceleration and engine response was crisper than the other wires."
If you are truly looking for the ultimate performance wires, look no further than ULTRA.
Photo courtesy of Racing Beat.
|,|||-||2BIGBRKIT90F|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Miata Version 5 Big Brake Kit - FRONT ONLY|,|61-2060|,|1,099.00|,|998.00|,||,||,|15.000 |,||,||,||,|Miata Version 5 Big Brake Kit - FRONT ONLY
Front only of our best version 5 Miata Big Brake Kit. Includes 11.75 inch rotors - your choice between standard Wilwood rotors for low replacement costs or AP Racing for maximum racetrack longevity, front heavy duty stainless steel lines, Wilwood Dynapro calipers with BP-20 pads, mounting brackets, everything you need to complete installation of the front big brake kit.
*** The front calipers in this kit use the 7812 pad shape. Type "7812" into the search box on the upper left of our site to see all our pad options for this caliper.***
Our Version 5 Miata Big Brake Kit has evolved to an 11.75" rotor - the largest that can be fit under most track day wheels - and now features the option for you of either the most affordable rotor replacements available anywhere, OR the highest quality AP Racing rotors for exceptional longevity.
Wilwood 32 vane Ultralight rotor - straight vane design, great for the average street user that wants BIG stopping power but doesn't need the massive heat resistance of our AP Racing rotors. As a bonus, these cost less than $40 per rotor to replace!
AP Racing J-Hook rotor - directional cooling vanes and the highest quality motorsport grade iron composition. The directional internal vanes work on the same principal as an air-impeller, designed to extract hot air. As the disc rotor rotates, it pumps air from the center outwards. The AP Racing rotors also use the highest quality iron and manufacturing processes. The bottom line is that these rotors usually last our track users four or more times longer than the Wilwood rotors (thus, the greater entry cost is paid back in rotor replacement savings with many of our track customers reporting YEARS of track use on one set of these rotors.).
Both rotors share the same scalloped aluminum hats provide the greatest resistance to distortion for uniform disc expansion and added thermal protection for your bearings. Hats are anodized so they will look great for years to come.
Brian's Application Notes: You get what you pay for...and EVERYTHING in our version 5 kit is much more stout than in our discount $599 Wilwood kit. The hats are far superior with more connection points to the rotor using better fasteners. The brackets are several times stronger, the AP rotors are MUCH higher density that will last several times longer than the Wilwood rotors, the rotors cool MUCH more effectively, and finally, the lines are custom made for a direct fit and don't need the numerous adapter fittings used by the Wilwood kit (skipping adapters means less chance for brake fluid leaks!).
|,|"Select Rotor" "Select Here" "AP Racing J Hook add(+$199)" "Wilwood 32 Vane Ultralight"|-||-|"Shipping Cost" "add(+$49)"|-||-|||-||MIVICHDOTO|,|NBACCESSORIES|,|Miata Vintage Chrome - Door Topper|,|503-345|,|34.99|,|27.95|,||,||,|0.000 |,||,||,||,|Miata Vintage Chrome - Door Topper
These peices create an elegant chrome look on the tops of your doors.
Frequently Asked Questions
Q: What year Miatas will these kits fit?
A: Miata Vintage Chrome vinyl molding kits fit all Miatas.
Q: Are these kits easy to install?
A: Extremely easy! Most can literally be installed in a few minutes.
Q: Are there any special tools required to install these kits?
A: Since a few kits are intentionally made longer than needed, and require trimming for an exact fit, the only tool you may need is an anvil type garden pruner. These have a cutting blade on one side, and a flat 'anvil' on the other. Always cut molding from the chrome side down. Trimming tips are included with each kit.
Q: I'm not a real "do-it-yourselfer", how detailed are the instructions?
A: Each kit comes with detailed installation instructions which include photos, along with installation and surface-prep tips. You'll be surprised that something that makes your car look this good, installs so easily.
Q: What kind of material are the chrome kits made from?
A: They are made from a flexible, automotive grade, 1/4-1/2 round, vinyl molding that has a chrome finish. The material has a high quality 3M adhesive on the back side, so no drilling is required for installation.
The Miata Vintage Chrome - Door Topper fits model years 1990-2005
|,|||-||MIVICHTASU|,|NBACCESSORIES|,|Miata Vintage Chrome - Taillight Surround|,|503-351|,|29.99|,|24.95|,||,||,|0.000 |,||,||,||,|Miata Vintage Chrome - Taillight Surround
Thanks to the ultra flexible nature of this high quality molding, this kit molds perfectly to the difficult compound curves of the taillight lens. This 2-piece kit will do both tail lights.
Frequently Asked Questions
Q: What year Miatas will these kits fit?
A: Miata Vintage Chrome vinyl molding kits fit all Miatas.
Q: Are these kits easy to install?
A: Extremely easy! Most can literally be installed in a few minutes.
Q: Are there any special tools required to install these kits?
A: Since a few kits are intentionally made longer than needed, and require trimming for an exact fit, the only tool you may need is an anvil type garden pruner. These have a cutting blade on one side, and a flat 'anvil' on the other. Always cut molding from the chrome side down. Trimming tips are included with each kit.
Q: I'm not a real "do-it-yourselfer", how detailed are the instructions?
A: Each kit comes with detailed installation instructions which include photos, along with installation and surface-prep tips. You'll be surprised that something that makes your car look this good, installs so easily.
Q: What kind of material are the chrome kits made from?
A: They are made from a flexible, automotive grade, 1/4-1/2 round, vinyl molding that has a chrome finish. The material has a high quality 3M adhesive on the back side, so no drilling is required for installation.
The Miata Vintage Chrome - Taillight Surround fits model years 1990-2005
|,|||-||MIVICHVEWIKI|,|NBACCESSORIES|,|Miata Vintage Chrome - Vent Window Kit|,|503-315|,|29.99|,|24.95|,||,||,|0.000 |,||,||,||,|Miata Vintage Chrome - Vent Window Kit
This 4-piece kit will do both vertical posts of both vent windows. They look good alone, or with the Cockpit Wrap, or Door Topper kits which will complete the bottom part of the triangular window.
Frequently Asked Questions
Q: What year Miatas will these kits fit?
A: Miata Vintage Chrome vinyl molding kits fit all Miatas.
Q: Are these kits easy to install?
A: Extremely easy! Most can literally be installed in a few minutes.
Q: Are there any special tools required to install these kits?
A: Since a few kits are intentionally made longer than needed, and require trimming for an exact fit, the only tool you may need is an anvil type garden pruner. These have a cutting blade on one side, and a flat 'anvil' on the other. Always cut molding from the chrome side down. Trimming tips are included with each kit.
Q: I'm not a real "do-it-yourselfer", how detailed are the instructions?
A: Each kit comes with detailed installation instructions which include photos, along with installation and surface-prep tips. You'll be surprised that something that makes your car look this good, installs so easily.
Q: What kind of material are the chrome kits made from?
A: They are made from a flexible, automotive grade, 1/4-1/2 round, vinyl molding that has a chrome finish. The material has a high quality 3M adhesive on the back side, so no drilling is required for installation.
The Miata Vintage Chrome - Vent Window Kit fits model years 1990-2005
|,|||-||MIVICHWITR|,|NBACCESSORIES|,|Miata Vintage Chrome - Windshield Trim|,|503-325|,|39.99|,|37.95|,||,||,|0.000 |,||,||,||,|Miata Vintage Chrome - Windshield Trim
This 1-piece kit will be the finishing touch for those of you going for the true vintage sports car look.
Frequently Asked Questions
Q: What year Miatas will these kits fit?
A: Miata Vintage Chrome vinyl molding kits fit all Miatas.
Q: Are these kits easy to install?
A: Extremely easy! Most can literally be installed in a few minutes.
Q: Are there any special tools required to install these kits?
A: Since a few kits are intentionally made longer than needed, and require trimming for an exact fit, the only tool you may need is an anvil type garden pruner. These have a cutting blade on one side, and a flat 'anvil' on the other. Always cut molding from the chrome side down. Trimming tips are included with each kit.
Q: I'm not a real "do-it-yourselfer", how detailed are the instructions?
A: Each kit comes with detailed installation instructions which include photos, along with installation and surface-prep tips. You'll be surprised that something that makes your car look this good, installs so easily.
Q: What kind of material are the chrome kits made from?
A: They are made from a flexible, automotive grade, 1/4-1/2 round, vinyl molding that has a chrome finish. The material has a high quality 3M adhesive on the back side, so no drilling is required for installation.
The Miata Vintage Chrome - Windshield Trim fits model years 1990-2005
|,|||-||MIATA-VIPER-SECURITY-SYSTEM|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Miata Viper Security System|,|miata-viper-security-system|,|259.00|,|179.95|,||,||,||,||,||,||,|Miata Viper Security System
This entry level Viper security system will wrap your vehicle in protection, with the most sophisticated electronic technologies available today, including the Stinger® DoubleGuard® shock sensor, Revenger® six-tone siren and Failsafe® Starter Kill – Now featuring 4-button remotes, Control Center and XR+ receiver. This state-of-the-art system also offers in-demand convenience feature like keyless entry. 2 4-button 1-Way. Up to 1/4 Mile Range
Features:
* 2 Stage Shock Sensor
* Door, Bonnet & Boot Protection
* Engine Immobilisation
* Parking Light Flash (Arm, Disarm & Trigger)
* Keyless Entry
* Status Reporting LED
* Diagnostics & Event Reporting
* Six Tone Standard Siren
* Two auxilliary outputs
Installation
Professional installation is strongly recommended for this product.
|,|||-||VISBLANPLAT|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Miata Visor Blanking Plates|,|402-100|,|24.99|,|14.95|,||,||,|0.000 |,||,|afgadfga|,||,|If the visors in your Miata are more of an obstruction than anything else...But you haven't removed them because of the unsightly holes left behind, these visor blanking plates are the perfect solution.
They screw right into place in seconds and provide a clean finished look to your Miata...not to mention a great unobstructed view of the road!
Price is for the pair.
|,|"Please Select Finish" "Black" "Silver add(+$1.00)"|-||-|||-||WHSPSETOF2|,|20MAMISUANDS4|,|Miata Wheel Spacers - Set of Two in Black|,|MC-WPT|,|109.99|,|69.02|,||,||,|0.000 |,||,||,||,|Mazda Miata Wheel Spacers, Set of 2
Wheel Spacers - Our light weight Aluminum (6061 T6)wheel spacers are designed to fit snug on the hub and with a little space around the wheel studs to work with the stock studs or upgraded 7/16" wheel studs. Scalloped design to make them as light as possible, yet still giving the wheel a solid surface to sit on between the wheel and the hub.
All wheel spacers are delivered anadized in black or red in 1/4", 1/2", 3/8", and now 1" width. Special order colors are available. Please call for details.
Price is for a Quantity of Two.
* It is highly reccommended to use new longer length wheel studs with wheel spacers thicker than 1/4" to ensure proper torque ratings are achieved.
Based on the new 2009 Wheel Spacer rule in the GCR you can run different sizes on the front and the rear as long as they are the same from side to side. 13mm =.512 which is just a tiny bit over a 1/2".
These Mazda Miata Wheel Spacers are no longer available in Red. These come now only in Black.
|,|"Select Color" "Black"|-||-|Size "5mm" "1/4 inch" "3/8 inch add(+$15)" "1/2 inch add(+$30)" "1 inch add(+$95)"|-||-|||-||MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1990-1997|,|MX-5-MIATA-PARTS-1990-1997|,|MIATA WHEELS & TIRES|,||,||,||,|MAZDA MX-5 MIATA WHEELS, TIRES, PARTS AND ACCESSORIES|,||,||,||,||,|mamitiandwhf mamitifor19 19mamitiandw mamiwhfor19 19mamitiandw1 19mamitiandw2
|,|
|,|||-||MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|MX-5-MIATA-PARTS-1999-2005|,|MIATA WHEELS & TIRES|,||,||,||,|MAZDA MX-5 MIATA WHEELS, TIRES, PARTS AND ACCESSORIES|,||,||,||,||,|mamitiandwhf mamitifor19 19mamitiandw mamiwhfor19 19mamitiandw1 19mamitiandw2
|,|
|,|||-||MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|MAZDA-MX-5-MIATA-PARTS-2016|,|MIATA WHEELS & TIRES |,||,||,||,|MAZDA MX-5 MIATA WHEELS, TIRES, PARTS AND ACCESSORIES|,||,||,||,||,||,|
|,|||-||MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2006-2012|,|MX-5-MIATA-PARTS-2006-2012|,|MIATA WHEELS & TIRES |,||,||,||,|MAZDA MX-5 MIATA WHEELS, TIRES, PARTS AND ACCESSORIES|,||,||,||,||,||,|
|,|||-||MIWIBLBLNEWS|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Miata Wiper Blade Black New Silicone Single 18", 450mm (1990-2007) by PIAA|,|PIAA-95045|,|39.95|,|29.02|,||,||,|0.000 |,||,||,||,|For the 1990-2007 Mazda Miata MX-5
PIAA Super Silicone Wiper Blades boost your driving clarity, improve safety, and last longer. Active silicone coating treats your windshield, helping water bead on the surface and be wicked away with ease. PIAA Super Silicone Wiper Blades feature high-quality silicone-rubber compound blades—streak-free, squeak-free, chatter-free!
Super Silicone Wipers install easily—just pop out the old wipers and pop on your new PIAA blades. Includes windshield treatment wipe that boosts beading performance.
Your PIAA Super Silicone Wiper Blades are covered by PIAA's warranty against defect.
All PIAA frames are aerodynamically designed to help keep the rubber on the glass at highway speeds. To protect against corrosion, the frames are first zinc-plated and then powder coated. The wiper frame is properly balanced to provide equal pressure on the windshield, prlonging blade life and giving you clearer, noise-free operation.
Price is for one blade, and fit either passenger or driver side.
|,|||-||MIXEHEBU6055|,|NBACCESSORIES|,|Miata Xenon Headlight bulb 60 / 55 Watts = 90/100W, 1999-2000|,|PSL-H4XENONBULBS|,|79.95|,|29.95|,||,||,|0.000 |,||,||,||,|Miata H4 Xenon bulb 9003 60 / 55 Watts = 90/100W
Give your Miata that expensive look, found on todays newer luxury cars, for a fraction of the cost!
This bulb is the best out their! Made of a high quality high performance materials with a fiberglass base that will not burn out your wiring 55/66W=90/100W!!!
This bulb is guaranteed to give off a bright white light with a blue tint. Don't be fooled by cheap imitations that can be found at your local auto parts stores. Those cheap quality bulb doesn't compare to these.
This bulb gives off that true white light with a hint of blue, not that stock yellow. They are Xenon gas filled. Not ion filled that gives off that rainbow look. Besides looking cool, they dramatically improve your visibility at night! Price is per bulb.
For Mazda Miata years 1999-2000
|,|||-||MIXEHEREHIDB|,|NBACCESSORIES|,|Miata Xenon Headlight High Replacement HID bulbs 2001-2005|,|PSL-9005XENONBULBS|,|59.95|,|29.95|,||,||,|0.000 |,||,||,||,|Miata 9005 Xenon Replacement HID bulbs (high beam)
Give your Miata that expensive look, found on todays newer luxury cars, for a fraction of the cost!
These bulbs are the best out their! Made of a high quality high performance materials with a fiberglass base that will not burn out your wiring. These bulbs are guaranteed to give off a bright white light with a blue tint.
Don't be fooled by cheap imitations that can be found at your local auto parts stores. Those cheap quality bulbs don't compare to these. I've seen these bulbs retail for as much as $80 a set, so buy now!!
These bulbs give off that true white light with a hint of blue, not that stock yellow. They are Xenon gas filled. Not ion filled that gives off that rainbow look. Besides looking cool, they dramatically improve your visibility at night!
For Mazda Miata years 2001-2005.
|,|||-||MIHA2HIDCOKI1|,|NBACCESSORIES|,|Miata Xenon HID Conversion Kit 2001-2004|,|HO-XC9006-W|,|192.00|,|159.95|,||,||,|0.000 |,||,||,||,|Miata Xenon HID Conversion Kit 2001-2004
Xenon HID conversion kit
* Easy plug & play installation
* 6000K Color Temperature
* Crystal white light!
* Ballast, Lights, and plugs included!
35W Xenon operation is 3 times brighter than stock halogen bulbs, you will notice a 300% Increase in lighting! Making driving safer, while consuming 60% less power!
|,|||-||MIXELOWHEBU5|,|NBACCESSORIES|,|Miata Xenon Low Headlight Bulbs 55W 2005|,|PSL-H7XENONBULBS|,|79.95|,|29.95|,||,||,|0.000 |,||,||,||,|Miata H7 Xenon bulbs 55W (Low Beam)
Give your Miata that expensive look, found on todays newer luxury cars, for a fraction of the cost!
These bulbs are the best out their! Made of a high quality high performance materials with a fiberglass base that will not burn out your wiring.
These bulbs are guaranteed to give off a bright white light with a blue tint. Don't be fooled by cheap imitations that can be found at your local auto parts stores. Those cheap quality bulbs don't compare to these. I've seen these bulbs retail for as much as $80 a set, so buy now!
These bulbs give off that true white light with a hint of blue, not that stock yellow. They are Xenon gas filled. Not ion filled that gives off that rainbow look. Besides looking cool, they dramatically improve your visibility at night!
For Miata year 2005.
|,|||-||MI90XEREHEHI|,|NBACCESSORIES|,|Miata Xenon Replacement Low Headlight HID bulbs 2001-2004|,|PSL-9006XENONBULBS|,|59.95|,|29.95|,||,||,|0.000 |,||,||,||,|Miata 9006 Xenon Replacement HID bulbs (low beam)
Give your Miata that expensive look, found on todays newer luxury cars, for a fraction of the cost! These bulbs are the best! Made of high quality high performance materials with a fiberglass base that will not burn out your wiring.
These bulbs are guaranteed to give off a bright white light with a blue tint. Don't be fooled by cheap imitations that can be found at your local auto parts stores. Those cheap quality bulbs don't compare to these.
I've seen these bulbs retail for as much as $80 a set. These bulbs give off that true white light with a hint of blue, not that stock yellow. They are Xenon gas filled. Not ion filled that gives off that rainbow look. Besides looking cool, they dramatically improve your visibility at night!
For Mazda Miata years 2001-2004.
|,|||-||MIFRCA|,|OWNERS-SHOWCASE|,|Michel & France
Quebec, Canada|,|newitem109996239|,||,||,||,||,||,||,||,||,|I have my Miata since a year and I have to add an aluminium dashboard kit and the genuine Miata crash bars, then from Go Miata, the lateral sills kit with the rear mudguard, the front air-dam and the rear spoiler.
Thank you so much to Go Miata for the excellent support and their dedication to customer service, with their help I got the parts pre-painted with the good color code from Mazda and the installation was done very easily.
Thank-you again Go Miata.
Michel & France
Quebec, Canada
|,|||-||MIMASAUPTO65|,||,|MIDNIGHT MADNESS SALE!!! UP to 65% OFF!!! |,||,||,||,||,||,||,||,||,||,||,|||-||MISHIMOTO1|,|SHOP-BY-TOP-MIATA-BRANDS|,|Mishimoto|,||,||,||,||,||,||,||,||,||,|
|,|||-||MOCOHY1BO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Mishimoto Liquid Chill Synthetic Engine Coolant, Full Strength - 1 Gallon|,|MMRA-LC-FULLF|,|89.99|,|74.90|,||,||,|0.000 |,||,||,||,|Mishimoto Liquid Chill Synthetic Engine Coolant, Full Strength - 1 Gallon
Do you hear that? That little sigh that's coming from your engine bay? That's your radiator asking for Mishimoto Liquid Chill® Synthetic Engine Coolant / Antifreeze. Formulated to operate flawlessly under extreme conditions and with both gasoline and diesel, Liquid Chill® antifreeze and engine coolant will help your engine warm up quickly and maintain ideal operating temperatures.
Liquid Chill® Synthetic Engine Coolant technology combines an inherently nontoxic propylene glycol antifreeze base with unique poly organic additives (POAT) to allow a service life that can exceed 7+ years or 750,000 miles in Heavy Duty (diesel) applications and over 2+ years or 250,000 miles in Light Duty (gasoline) applications, although Mishimoto engineers recommend consulting your service manual for application-specific coolant and antifreeze guidelines. Liquid Chill® Synthetic Engine Coolant is designed to meet or exceed all stock specifications and exceeds the specs needed to pass ASTM D6210 and ASTM D3306 coolant / antifreeze tests. This antifreeze coolant is safe for all water-cooled engines, protecting against boilover to 265°F and freezing to -26°F (with 15 psi cap)**.
The proprietary formula doesn't contain any nasty nitrates, amines, high-fructose corn syrup, phosphates, silicates, borates, and all those other "ates" that will clog up thermostats and radiators, and cause excessive wear on water pumps. However, Mishimoto engineers strongly recommend that you and your children do NOT consume this antifreeze coolant. Seriously, don't drink it, and keep it on a high shelf so kids and pets can't get to it.
|,|"Handling fee" "add(+$12)"|-||-|||-||MIMAMISIHEHO|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Mishimoto Mazda Miata Silicone Heater Hose Set 1990-1991 |,|MMHOSE-MIA-90HHBK|,|130.00|,|106.95|,||,||,|0.000 |,||,||,||,|Mishimoto Mazda Miata Silicone Heater Hose Set
Mishimoto Mazda Miata heater hoses are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all designed and engineered for a direct OEM fit.
|,|||-||MIMAMISIHEHO1|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1990-1997|,|Mishimoto Mazda Miata Silicone Heater Hose Set 1992-1993|,|MMHOSE-MIA-92HHBK|,|130.00|,|106.95|,||,||,|0.000 |,||,||,||,|Mishimoto Mazda Miata Silicone Heater Hose Set
Mishimoto Mazda Miata heater hoses are made with a dual layer combining high grade silicone and heat-resistant embedded fibers to provide efficient heat reduction and increased pressure tolerance, all designed and engineered for a direct OEM fit.
|,|||-||MISHIMOTO-MMAI-MIA-16P-PERFORMANCE-COLD-AIR-INTAKE-2016-POLISHED|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|Mishimoto MMAI-MIA-16P Performance Cold-Air Intake 2016+ (Silver Polished)|,|MMAI-MIA-16P|,|475.00|,|403.90|,||,||,|0.000 |,||,||,||,|Mishimoto MMAI-MIA-16P Performance Cold-Air Intake 2016+ (Polished)
Performance Silver Polished Aluminum Cold-Air Intake (MMAI-MIA-16P) by Mishimoto®. Provide maximum, unrestricted airflow with the Mishimoto Performance Race Intake. Mishimoto pulled out all of the stops with this intake, featuring a 3" short-ram intake pipe, designed with large turbochargers and maximum airflow in mind.
Features:
Installs in under 30 minutes
Larger diameter intake pipe for large turbochargers and more aggressive engine tunes
Optional airbox retains stock-like appearance and use of the stock air intake snorkel
Provides highly aggressive intake tone under acceleration
CNC-machined air diverter helps maintain reliable and consistent MAF readings
Works with stock or aftermarket induction hoses
Fits with front-mount intercooler kits
Mishimoto Lifetime Warranty
Designed to fit on either your stock or Mishimoto turbo inlet tube, this race intake is also compatible with most aftermarket front-mount intercooler kits. Due to the size of the intake pipe, a re-tune of your vehicle's ECU is necessary to keep your engine running safe and extracting the most horsepower from the added airflow. The intake pipe also features a CNC-machined air diverter to provide consistent airflow readings to the MAF sensor, making re-tuning quick and easy. The intake pipe is available in a polished or wrinkle black finish. A 3" diameter Mishimoto high-flow air filter is also included which features a built-in velocity stack for maximum flow.
Mishimoto Automotive is the leading manufacturer of aftermarket performance cooling products. The company was established in 2003 with the goal of providing customers with superior cooling system upgrades suited for track cars and daily drivers alike. The staff of automotive enthusiasts works hard to consistently produce the highest-quality products and provide exceptional customer service.
|,|"Application" "Mazda MX-5 Miata 2016-2020"|-||-|"Color" "Silver Polished"|-||-|||-||MISHIMOTO-MMAI-MIA-16WBK-PERFORMANCE-ALUMINUM-COLD-AIR-INTAKE-2016-WRINKLE-BLACK|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|Mishimoto MMAI-MIA-16WBK Performance Aluminum Cold-Air Intake 2016+ (Wrinkle Black)|,|MMAI-MIA-16WBK|,|475.00|,|403.90|,||,||,|0.000 |,||,||,||,|Mishimoto MMAI-MIA-16WBK Performance Aluminum Cold-Air Intake 2016+ (Wrinkle Black)
Performance Black Wrinkle Aluminum Cold-Air Intake (MMAI-MIA-16WBK) by Mishimoto®. Provide maximum, unrestricted airflow with the Mishimoto Performance Race Intake. Mishimoto pulled out all of the stops with this intake, featuring a 3" short-ram intake pipe, designed with large turbochargers and maximum airflow in mind.
Features:
Installs in under 30 minutes
Larger diameter intake pipe for large turbochargers and more aggressive engine tunes
Optional airbox retains stock-like appearance and use of the stock air intake snorkel
Provides highly aggressive intake tone under acceleration
CNC-machined air diverter helps maintain reliable and consistent MAF readings
Works with stock or aftermarket induction hoses
Fits with front-mount intercooler kits
Mishimoto Lifetime Warranty
Designed to fit on either your stock or Mishimoto turbo inlet tube, this race intake is also compatible with most aftermarket front-mount intercooler kits. Due to the size of the intake pipe, a re-tune of your vehicle's ECU is necessary to keep your engine running safe and extracting the most horsepower from the added airflow. The intake pipe also features a CNC-machined air diverter to provide consistent airflow readings to the MAF sensor, making re-tuning quick and easy. The intake pipe is available in a polished or wrinkle black finish. A 3" diameter Mishimoto high-flow air filter is also included which features a built-in velocity stack for maximum flow.
Mishimoto Automotive is the leading manufacturer of aftermarket performance cooling products. The company was established in 2003 with the goal of providing customers with superior cooling system upgrades suited for track cars and daily drivers alike. The staff of automotive enthusiasts works hard to consistently produce the highest-quality products and provide exceptional customer service.
|,|"Application" "Mazda MX-5 Miata 2016-2020"|-||-|"Color" "Wrinkle Black"|-||-|||-||MISHIMOTO-MMAI-MIA-16WRD-PERFORMANCE-ALUMINUM-COLD-AIR-INTAKE-2016-WRINKLE-RED1|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|Mishimoto MMAI-MIA-16WRD Performance Aluminum Cold-Air Intake 2016+ (Wrinkle Red)|,|MMAI-MIA-16WRD|,|475.00|,|403.90|,||,||,|0.000 |,||,||,||,|Mishimoto MMAI-MIA-16WRD Performance Aluminum Cold-Air Intake 2016+ (Wrinkle Red)
Performance Wrinkle Red Aluminum Cold-Air Intake (MMAI-MIA-16WRD) by Mishimoto®. Provide maximum, unrestricted airflow with the Mishimoto Performance Race Intake. Mishimoto pulled out all of the stops with this intake, featuring a 3" short-ram intake pipe, designed with large turbochargers and maximum airflow in mind.
Features:
Installs in under 30 minutes
Larger diameter intake pipe for large turbochargers and more aggressive engine tunes
Optional airbox retains stock-like appearance and use of the stock air intake snorkel
Provides highly aggressive intake tone under acceleration
CNC-machined air diverter helps maintain reliable and consistent MAF readings
Works with stock or aftermarket induction hoses
Fits with front-mount intercooler kits
Mishimoto Lifetime Warranty
Designed to fit on either your stock or Mishimoto turbo inlet tube, this race intake is also compatible with most aftermarket front-mount intercooler kits. Due to the size of the intake pipe, a re-tune of your vehicle's ECU is necessary to keep your engine running safe and extracting the most horsepower from the added airflow. The intake pipe also features a CNC-machined air diverter to provide consistent airflow readings to the MAF sensor, making re-tuning quick and easy. The intake pipe is available in a polished or wrinkle black finish. A 3" diameter Mishimoto high-flow air filter is also included which features a built-in velocity stack for maximum flow.
Mishimoto Automotive is the leading manufacturer of aftermarket performance cooling products. The company was established in 2003 with the goal of providing customers with superior cooling system upgrades suited for track cars and daily drivers alike. The staff of automotive enthusiasts works hard to consistently produce the highest-quality products and provide exceptional customer service.
|,|"Application" "Mazda MX-5 Miata 2016-2020"|-||-|"Color" "Wrinkle Red"|-||-|||-||MISHIMOTO-UNIVERSAL-TRANSMISSION-COOLER-AND-POWER-STEERING-COOLER-|,|19MAMIENPEVI|,|Mishimoto Universal Transmission Cooler and Power Steering Cooler|,|MMTC-U|,|110.00|,|98.90|,||,||,|0.000 |,||,||,||,|Mishimoto Universal Transmission Cooler and Power Steering Cooler
The Mishimoto Universal Transmission Cooler and Power Steering Cooler Kit is used to cool automatic transmissions and power steering units. Some Mishimoto radiators are available only for manual transmission applications. By using the universal transmission cooler, automatic transmission users have the ability to use our all-aluminum radiators with their automatic applications. Transmission coolers can also be installed as supplemental cooling units for trucks which undergo a high amount of stress due to towing. Many transmission cooler kits use standard 3/8" push on fittings, although you should check your service manual for your specific application.
Purchase Includes:
Transmission cooler Hose
(4) Plastic Ties
(4) Plastic tie connectors
(4) foam pads
(4) O-ring clamps
(1) drain cock connector
Note: Custom work may be required for fitment and function
|,|||-||MIXING-BAFFLE-FOR-ROADSTERSPORT-SUPERSTREET-TWIN-TIP-MUFFLERS|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Mixing Baffle for RoadsterSport SuperStreet Twin Tip Mufflers 2016-2020|,|61-2105|,|39.99|,|35.00|,||,||,||,||,||,||,|Mixing Baffle for RoadsterSport SuperStreet Twin Tip Mufflers 2016-2020
This Mixing Baffle allows the owner of SuperStreet Twin Tip to mix the ratio of bass to treble and very effectively tune the mix to what they want to hear. Deepest install is least bass, and pulling it back to outer connection positions progressively adds back the bass notes.
*** Product images may differ from actual product appearance ***
|,|"Drop-ship fee" "add (+$9)"|-||-|||-||MOMDBRSA16|,|MODAWHEELS|,|Moda MD10 Bright Satin 16x7.5|,|TR-MODAMD10BRTSTN16x7-5|,|202.99|,|169.95|,||,||,|5.000 |,||,||,||,|Moda MD10 Bright Satin 16x7.5
Front and Rear
* Size: 16x7.5
* Offset: 38mm
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Finish: Bright Satin
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$45)"|-||-|||-||MD23|,|MODAWHEELS|,|Moda MD23 Machined w/Anthracite Accent 16x7.5|,|MD23|,|179.05|,|149.99|,||,||,||,||,||,||,|Moda MD23 Machined w/Anthracite Accent 16x7.5
Front and Rear
-Size:16x7.5
-Offset:48mm
-Backspacing:5.79"
-Bolt Pattern:5-100
-Rec. Tire Size:225/60-16
-Weight:20.1 lbs.
-Finish:Machined w/Anthracite Accent
-Construction:1pc. Gravity Cast
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$45)"|-||-|||-||MODAWHEELS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|Moda Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||MOMRACSTEERW|,|NBINVIALL|,|MOMO "RACE" STEERING WHEEL |,|MOM-RCE35BK1B|,|310.00|,|258.90|,||,||,|0.000 |,||,||,||,|MOMO "RACE" STEERING WHEEL
Momo's Italian "RACE" Performance Accessories are made from the utmost quality materials to bring your MX-5 Miata maximum style and class. Add some of your personal style to your interior with Momo's Race Steering Wheel. Each wheel has the Momo name on it to guarantee its authenticity. Wheel diameter measures 13.8" and is made of genuine black leather and aluminum.
This steering wheel features soft leather and encourages a "correct" hand placement on the wheel.
This will truly make your Miata stand out.
Click on the photo for a larger view
|,|"Select Size" "Select Here" "320mm" "350mm"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOST20COBL1|,|NBINAC1|,|MOMO 2012 Start Black Race Seat - New FIA Homologation|,|MOMO-1070BLK|,|599.99|,|484.95|,||,||,|25.000 |,||,||,||,|Click Here For Price Match Guarantee
MOMO 2012 Start Black Race Seat - New FIA Homologation
Hans® compatible fiberglass seat. New design seat back stitching.
COLOR: BLACK
Frame Material: Fiberglass
Weight: 19.6 lbs (8.9 kg)
5 seat belt openings.
4 side fixing points.
FIA approved 8855-1999
Hans® compatible
|,|"Shipping cost " "add(+$195)"|-||-|||-||MOSUCUPCORAS|,|NBINAC1|,|MOMO 2012 Super Cup Black Racing Seat - New FIA Homologation|,|1071BLK|,|699.99|,|659.95|,||,||,|25.000 |,||,||,||,|Click Here For Price Match Guarantee
MOMO 2012 Super Cup Black Racing Seat - New FIA Homologation
Hans® compatible fiberglass seat. Seat shell visible on the rear, front portion upholstered in black fabric.
The exclusive Airnet® technical material covers the central area on the back, and Kinder Point on the seating area provides the best possible grip.
Removable double leg cushion to optimize support.
5 seat belt openings.
Side mount.
Color: black
Weight: standard version 8.7 kgs XL version 10.2 kgs
FIA approved 8855-1999
Hans® compatible
|,|"Shipping cost" "add(+$195)"|-||-|||-||LAMLEDDRL30F-1|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|MOMO 30-LED DAYTIME RUNNING LIGHTS (5000K) - P/N: LAMLEDDRL30F |,|LAMLEDDRL30F|,|165.99|,|119.95|,||,||,||,||,||,||,|MOMO 30-LED DAYTIME RUNNING LIGHTS (5000K) - P/N: LAMLEDDRL30F
Seeing well is important, but being visible is equally so. Even in broad daylight, driving conditions can be such that sudden changes in ambient light levels render your vehicle less visible to oncoming traffic or pedestrians: for example, on heavily shaded roads or a tunnel entry following a curve. For this reason, MOMO is introducing a complete range of daytime driving lights, based on LED technology.
MOMO's LED technology guarantees maximum daytime visibility without having to use headlights, thereby prolonging their effective life and reducing the vehicle's energy usage.
Ultra white light for maximum visibility.
5000K - Extremely durable
Lights turn on automatically at start up. (Control unit not included.)
Adjustable brackets.
Universal mounting kit.
Easy installation.
100% water proof
SAE Compliant
|,|||-||MOMANLEAT|,|20MAMIINKN|,|MOMO ANATOMIC LEATHER - SHORT SHIFT KNOB |,|MOMO-ASBK1|,|85.00|,|79.90|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Real Genuine Momo Anatomic Black Leather Universal Shift Knob
Available in Short or Tall versions
Made of Strong, Light-weight Aluminum and Real Italian Stitched Black Leather
Provides better anatomic grip with a sports car feel
Features a very sporty anatomic shape
Add a Very Stylish, Trick, Race look and feel to your interior!
These are universal and fit most all Manual Transmission vehicles
Extremely easy to install on most applications
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOANTA|,|20MAMIINKN|,|MOMO ANATOMIC LEATHER - TALL SHIFT KNOB |,|MOMO-ALBK1|,|105.00|,|79.95|,||,||,|0.000 |,||,||,||,|MOMO ANATOMIC LEATHER - TALL SHIFT KNOB
Available in Short or Tall versions
Made of Strong, Light-weight Aluminum and Real Italian Stitched Black Leather
Provides better anatomic grip with a sports car feel
Features a very sporty anatomic shape
Add a Very Stylish, Trick, Race look and feel to your interior!
These are universal and fit most all Manual Transmission vehicles
Extremely easy to install on most applications
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a Tight Fit Adapter add (+$44.95)"|-||-|||-||MOMOAUTOMATIC|,|20MAMIINKN|,|MOMO AUTOMATIC BLACK LEATHER SHIFT KNOB (AUTOMATIC)|,|MOM-AUTOBK1|,|135.00|,|119.95|,||,||,|0.000 |,||,||,||,|MOMO AUTOMATICO BLACK LEATHER SHIFT KNOB (AUTOMATIC).
MOMO AUTOMATIC TRANSMISSION SHIFT KNOB.
The MOMO Automatico shift knob is specifically designed for cars equipped with automatic transmissions. This MOMO Automatico comes with black leather finish with chrome accent rings, top button and bottom collar.
MOMO Shift Knobs are simply the finest shift knobs available in the world. Painstakingly designed and hand crafted of only the highest grades of leather, wood and aluminum, these shift knobs look great and feel even better. MOMO Shift Knobs can actually make the car more enjoyable to drive by putting a comfortable, easy-to-grip knob in your hands.
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|||-||MOAUCHAL|,|20MAMIINKN|,|MOMO AUTOMATIC CHROMED ALUMINUM SHIFT KNOB (AUTOMATIC)|,|MOM-AUTOALU|,|135.00|,|119.95|,||,||,|0.000 |,||,||,||,|MOMO AUTOMATIC CHROMED ALUMINUM SHIFT KNOB (AUTOMATIC)
MOMO's Automatic Aluminum Shift Knob (Automatico)is specifically designed for cars equipped with automatic transmissions. MOMO's Automatico series offers the same "European flair" as their manual transmission counterparts.
It comes in either a satin aluminum or black leather finish with chrome accent rings, top button and bottom collar that will complement any interior.
MOMO shift knobs are precision crafted in Italy using only the finest materials. MOMO knobs are designed to last the life of your vehicle and offer a perfectly weighted feel for precise shifting. Each MOMO knob is engineered and tested to provide a comfortable grip for any size hand. Set screws and rubber washers are included for easy installation.
Available in Black Leather / Polished Aluminum Accents or Satin Aluminum / Polished Aluminum Accents. Designed for cars equipped with automatic transmissions and a button on the shift knob that must be pushed to move the lever into gear. The MOMO Automatic shift knob is 4-1/4" tall, 1-5/8" in diameter and weighs 7 ounces.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|||-||MOMO-CARBON-PLATE|,|SPMIDRCOTR|,|MOMO CARBON PLATE |,|CARBONPLATE|,|154.95|,|139.95|,||,||,|0.000 |,||,||,||,|MOMO CARBON PLATE
arbon fiber, Thickness 2.5 mm for use op to 4 buttons (not included) 6 drill points standards hub attachment
|,|||-||MOMOCOBRA|,|20MAMIINKN|,|MOMO COBRA ALUMINUM / CARBON SHIFT KNOB|,|MOM-COCBN|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO COBRA ALUMINUM / CARBON SHIFT KNOB
Aluminium with carbon or the black leather look inserts on each side gives this gear knob its aggressive look.
Precision crafted in Italy using only the finest materials, MOMO gear knobs are designed to last and offer a perfectly weighted feel for precise shifting. Each MOMO gear knob is engineered and tested to provide a comfortable grip for any size hand.
Installation is straight forward. Simply remove your old gear knob and using the provided set screws and rubber washers you install your new MOMO gear knob.
MOMO gear knobs are designed to work on manual transmission cars.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|||-||MOCOALLE|,|20MAMIINKN|,|MOMO COBRA ALUMINUM / LEATHER SHIFT KNOB|,|MOM-COBK1|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO COBRA ALUMINUM / LEATHER SHIFT KNOB
Aluminium with carbon or the black leather look inserts on each side gives this gear knob its aggressive look.
Precision crafted in Italy using only the finest materials, MOMO gear knobs are designed to last and offer a perfectly weighted feel for precise shifting. Each MOMO gear knob is engineered and tested to provide a comfortable grip for any size hand.
Installation is straight forward. Simply remove your old gear knob and using the provided set screws and rubber washers you install your new MOMO gear knob.
MOMO gear knobs are designed to work on manual transmission cars.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOCOEVOBLCHS|,|20MAMIINKN|,|MOMO COMBAT EVO BLACK / CHROME SILVER STITCH SHIFT KNOB |,|MOM-CTECHR|,|165.00|,|119.95|,||,||,|0.000 |,||,||,||,|MOMO COMBAT EVO BLACK / CHROME SILVER STITCH SHIFT KNOB
The MOMO Combat EVO stands 3.75" tall. The head measures 2.25" x 1.9" and it weighs 5.5 ounces. Click on an image at left for a close up look (may take a while to load depending on your connection speed).
Like all MOMO shift knobs, this is a universal fit and will fit all manual transmission equipped vehicles with shift shafts up to 14 mm in diameter. It is not recommended for use on cars with reverse lock outs.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOCOEVOBLBL|,|20MAMIINKN|,|MOMO COMBAT EVO BLUE / BLACK SHIFT KNOB |,|MOM-CTEBLU|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO COMBAT EVO BLUE / BLACK SHIFT KNOB
The MOMO Combat EVO stands 3.75" tall. The head measures 2.25" x 1.9" and it weighs 5.5 ounces. Click on an image at left for a close up look (may take a while to load depending on your connection speed).
Like all MOMO shift knobs, this is a universal fit and will fit all manual transmission equipped vehicles with shift shafts up to 14 mm in diameter. It is not recommended for use on cars with reverse lock outs.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOCOEVOCABL|,|SHOP-BY-TOP-MIATA-BRANDS-MOMO-SHIFT-KNOBS|,|MOMO COMBAT EVO CARBON / BLACK SHIFT KNOB |,|MOM-CTECBN|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO COMBAT EVO CARBON / BLACK SHIFT KNOB
The MOMO Combat EVO features a black leather covered body with prominent hand stitching up the sides.
The MOMO Combat EVO stands 3.75" tall. The head measures 2.25" x 1.9" and it weighs 5.5 ounces. Click on an image at left for a close up look (may take a while to load depending on your connection speed).
Like all MOMO shift knobs, this is a universal fit and will fit all manual transmission equipped vehicles with shift shafts up to 14 mm in diameter. It is not recommended for use on cars with reverse lock outs.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOCOEVOREDBL|,|20MAMIINKN|,|MOMO COMBAT EVO RED / BLACK SHIFT KNOB |,|MOM-CTERED|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO COMBAT EVO RED / BLACK SHIFT KNOB
The MOMO Combat EVO stands 3.75" tall. The head measures 2.25" x 1.9" and it weighs 5.5 ounces. Click on an image at left for a close up look (may take a while to load depending on your connection speed).
Like all MOMO shift knobs, this is a universal fit and will fit all manual transmission equipped vehicles with shift shafts up to 14 mm in diameter. It is not recommended for use on cars with reverse lock outs.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOCOEVOSIBL|,|20MAMIINKN|,|MOMO COMBAT EVO SILVER / BLACK SHIFT KNOB |,|MOM-CTESIL|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO COMBAT EVO SILVER / BLACK SHIFT KNOB
The MOMO Combat EVO stands 3.75" tall. The head measures 2.25" x 1.9" and it weighs 5.5 ounces. Click on an image at left for a close up look (may take a while to load depending on your connection speed).
Like all MOMO shift knobs, this is a universal fit and will fit all manual transmission equipped vehicles with shift shafts up to 14 mm in diameter. It is not recommended for use on cars with reverse lock outs.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOCOSTWH|,|NBINVIALL|,|MOMO COMPETITION STEERING WHEEL |,|MOM-COM35BK0B|,|295.00|,|242.95|,||,||,|0.000 |,||,||,||,|MOMO COMPETITION STEERING WHEEL
A sport wheel with a little touch of flair, the MOMO Competition has a bold hub, and comfortable grip. Perfect for the driver who wants a sporty, yet subtle look.
A Momo Competition steering wheel is pure luxury in your hands. Each handcrafted steering wheel is made from the finest leather and metal available. Starting with a precision aluminum stamping, Momo adds comfortable padding with hand-sewn top-grade leather or rich wood is fitted and smoothed to perfection. Even the hand painting of the horn button screams quality throughout production. All Momo steering wheels meet their exact manufacturing standards, and attention to every detail. For mounting, the Momo safety hub adapter is available for your Miata, perfectly fits your Miata, while elminating the usual horn and directional signal problems.
Quick look at the MOMO Competition Steering Wheel:
Rim Color: Black perforated leather.
Color: Black
Size: 350mm
Spoke: Black
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MODUAL|,|20MAMIINKN|,|MOMO DUKE ALUMINUM SHIFT KNOB |,|MOM-DUKALU|,|165.00|,|139.95|,||,||,|0.000 |,||,||,||,|MOMO DUKE ALUMINUM SHIFT KNOB
The Duke Shift Knob from MOMO expands on the classic round-knob theme with this elegant design.
The aluminum upper half incorporates the MOMO logo with a subtle laser-etched solution. The bottom half is high quality black leather.
With the MOMO logo as a major design element of the shift knob it will be more difficult for others to copy.
The bottom half is the high quality black leather that MOMO is famous for.
These are universal and fit most all Manual Transmission vehicles
Extremely easy to install on most applications
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOMO-EAGLE-STWH|,|20MAMIINSTWH|,|MOMO EAGLE STEERING WHEEL|,|EAG35BK0S|,|389.95|,|308.02|,||,||,|0.000 |,||,||,||,|MOMO EAGLE STEERING WHEEL
-350mm
PRODUCT DESCRIPTION Top Grain black leather and Airleather insert. Anthracite spokes and button.
Color Black Material leather Stitch Black Spoke Finish Anthracite Horn Black Ring n/a Screw n/a Diameter 13.78 in (350 mm) Grip thicknes 1.02 in (26 mm) Weight 3.45 lbs (1.56 kgs) for 280 mm version Dish n/a
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMOGOTHAM|,|20MAMIINKN|,|MOMO GOTHAM SHIFT KNOB |,|MOM-GOTBK1|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO Gotham Shift Knob
Product Description:
Top Grain black leather, dark chrome and rubberized MOMO logo insert, Gotham logo emblem and dark chrome collar.
Also available for reverse lock-out.
Additional Information
Color: Black
Material: Leather
Height: 2.83 in (72 mm)
Diameter: 2.09 in (53 mm)
Insert: 2.36 in (60 mm)
Weight: 7.3 oz (207 g)
|,|||-||MOGOSTWH|,|NBINVIALL|,|MOMO GOTHAM STEERING WHEEL|,|MOM-GOT35BK0B|,|305.00|,|259.95|,||,||,|0.000 |,||,||,||,|MOMO GOTHAM STEERING WHEEL
Gotham consists of a 350mm leather steering wheel with an aggressive 90mm dish, a round shift knob in leather with black chrome and “soft touch” accents and a machined aluminum, manual pedal set with black accents and the MOMO logo in white.
A Momo Gotham steering wheel is pure luxury in your hands. Each handcrafted steering wheel is made from the finest leather, wood, and metal available. Starting with a precision aluminum stamping, Momo adds comfortable padding with hand-sewn top-grade leather or rich wood is fitted and smoothed to perfection. Even the hand painting of the horn button screams quality throughout production. All Momo steering wheels meet their exact manufacturing standards, and attention to every detail. For mounting, the Momo safety hub adapter is available for most applications, perfectly fits your vehicle, while elminating the usual horn and directional signal problems.
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOGOSTWHSHKN|,|SHOP-BY-TOP-MIATA-BRANDS-MOMO-SUPER-PACKAGE-DEALS|,|MOMO GOTHAM STEERING WHEEL AND SHIFT KNOB SET|,|MOM-GOTHAMSET|,|435.00|,|379.95|,||,||,|0.000 |,||,||,||,|MOMO GOTHAM STEERING WHEELand SHIFT KNOB SET
The Gotham kit from MOMO provides enthusiasts with products that are designed to give a cohesive look to your vehicle’s interior for the ultimate in customization.
Gotham consists of a 350mm leather steering wheel with an aggressive 90mm dish, a round shift knob in leather with black chrome and “soft touch” accents.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|||-||MOMO-GRAND-PRIX|,|NASTWH|,|MOMO GRAND PRIX STEERING WHEEL|,|momo-grand-prix|,|399.99|,|347.02|,||,||,||,||,||,||,|MOMO GRAND PRIX STEERING WHEEL
Diameter 350mm – grip 27 x 26 mm – dish 37 mm
Mahogany wood walnut matte finishing with back finger grooves
Silver spoke
|,|"Select Spoke" "Select Here" "Silver Finish Spoke" "Chrome Finish Spoke (SUPER GRAND PRIX)"|-||-|||-||MOMO-GTR2-STWH|,|NBINVIALL|,|MOMO GT2 STEERING WHEEL |,|GTR35BK0S|,|399.95|,|339.95|,||,||,|0.000 |,||,||,||,|MOMO GT2 STEERING WHEEL
-350mm
Top Grain leather with Alcantara insert and chrome accents.
Color Black Material leather Stitch n/a Spoke Finish Silver Horn Leather Ring Chrome Screw Black Diameter 13.78 in (350 mm) Grip thicknes 1.1 x 1.26 in (28 x 32 mm) Weight 3.65 lbs Dish No
|,|||-||MOGTRCO|,|20MAMIINKN|,|MOMO GTR COMPETITION SHIFT KNOB|,|MOM-ALUCOGTR|,|95.00|,|84.95|,||,||,|0.000 |,||,||,||,|MOMO GTR COMPETITION SHIFT KNOB
Aluminum with GTR on top
The GTR Sport and the GTR Competition shift knobs are now in inventory.
These evolutions for the popular Sport and Competition shift knobs now prominently feature the GTR logo on the top of each shift knob.
The logo is surrounded by 6 gold Allen bolts for a sporty contrast.
These are universal and fit most all Manual Transmission vehicles
Extremely easy to install on most applications
Made in Italy
MOMO Shift Knobs are simply the finest shift knobs available in the world. Painstakingly designed and hand crafted of only the highest grades of leather, wood and aluminum, these shift knobs look great and feel even better. MOMO Shift Knobs can actually make the car more enjoyable to drive by putting a comfortable, easy-to-grip knob in your hands.
The knobs are now available in limited availability.
Place your orders now for this exciting MOMO GTR Competition shift knob!
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|||-||MOMOGTRSPORT|,|20MAMIINKN|,|MOMO GTR SPORT SHIFT KNOB|,|MOM-ALUSPGTR|,|145.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO GTR SPORT SHIFT KNOB
Aluminum Sport - GTR
The GTR Sport and the GTR Competition shift knobs are now in inventory.
These evolutions for the popular Sport and Competition shift knobs now prominently feature the GTR logo on the top of each shift knob.
The logo is surrounded by 6 gold Allen bolts for a sporty contrast.
These are universal and fit most all Manual Transmission vehicles
Extremely easy to install on most applications
Made in Italy
The knobs are now available in limited availability.
Place your orders now for this exciting MOMO GTR Competition shift knob!
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOMOGTR2|,|20MAMIINKN|,|MOMO GTR2 SHIFT KNOB |,|MOM-GTRBK1|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO GTR2 SHIFT KNOB
Product Description:
Top Grain black leather with chrome and rubberized momo logo insert.
GTR2 emblem.
Chrome collar.
Also available for reverse lock-out.
Additional Information
Color: Black
Material: Leather
Height: 2.83 in (72 mm)
Diameter: 2.09 in (53 mm)
Insert: 2.36 in (60 mm)
|,|||-||MOGTSTWH|,|NBINVIALL|,|MOMO GTR2 STEERING WHEEL|,|MOM-GTR35BK0S|,|385.00|,|334.95|,||,||,|0.000 |,||,||,||,|MOMO GTR2 STEERING WHEEL
MOMO GTR2 Steering Wheel consists of a 350mm leather and suede steering wheel with a chrome and leather center pad for an upscale finish, a round shift knob in leather with chrome and “soft touch” accents and a machined aluminum
A Momo GTR2 steering wheel is pure luxury in your hands. Each handcrafted steering wheel is made from the finest leather, wood, and metal available. Starting with a precision aluminum stamping, Momo adds comfortable padding with hand-sewn top-grade leather or rich wood is fitted and smoothed to perfection. Even the hand painting of the horn button screams quality throughout production. All Momo steering wheels meet their exact manufacturing standards, and attention to every detail. For mounting, the Momo safety hub adapter is available for most applications, perfectly fits your vehicle, while elminating the usual horn and directional signal problems.
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOGTSTWHSHKN|,|SHOP-BY-TOP-MIATA-BRANDS-MOMO-SUPER-PACKAGE-DEALS|,|MOMO GTR2 STEERING WHEEL AND SHIFT KNOB|,|MOM-GTR2SET|,|615.00|,|484.90|,||,||,|0.000 |,||,||,||,|MOMO GTR2 STEERING WHEEL AND SHIFT KNOB
The GTR2 kit from MOMO provides enthusiasts with products that are designed to give a cohesive look to your vehicle’s interior for the ultimate in customization.
GTR2 consists of a 350mm leather and suede steering wheel with a chrome and leather center pad for an upscale finish, a round shift knob in leather with chrome and “soft touch” accents.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-HAND-BRAKES|,|NBINKN|,|MOMO HAND BRAKES|,||,||,||,||,||,||,||,||,||,||,|||-||MOHABO|,|SHOP-BY-TOP-MIATA-BRANDS-MOMO|,|MOMO HANDBRAKE BOOTS|,||,||,||,||,||,||,||,||,||,||,|||-||HERITAGE-CALIFORNIA-WOOD|,|20MAMIINSTWH|,|MOMO HERITAGE CALIFORNIA WOOD STEERING WHEEL|,|heritage-california-wood|,|442.00|,|367.02|,||,||,||,||,||,||,|MOMO HERITAGE CALIFORNIA WOOD STEERING WHEEL
The Heritage California wood steering wheel features elements reminiscent of MOMO’s early Ferrari and Porsche designs. Featuring the iconic “stacked” MOMO logo, this steering wheel incorporates a mahogany wood grip with back finger grooves and signature polished spokes.
Mahogany wood with circular contrast silk screen.
Matt gloss with back finger grooves.
Signature polished spokes.
Grip diameter 360mm
Grip 24 x 26, 50 mm
Dish 34.5 mm
|,|||-||MOMO-INDY-STWH|,|20MAMIINSTWH|,|MOMO Heritage INDY STEERING WHEEL|,|IND35MAOP|,|429.95|,|358.02|,||,||,|0.000 |,||,||,||,|MOMO Heritage INDY STEERING WHEEL
-350mm
-Wood Finish
|,|||-||MOHOBUGR|,|20MAMIINSTWH|,|MOMO HORN BUTTON - GRAY|,|MOM-HORN-LG-GREY|,|40.00|,|29.95|,||,||,|0.000 |,||,||,||,|
MOMO HORN BUTTON in Grey color.
Call Customer Service for other colors or MOMO special orders
|,|"Select Size" "Large" "Small 2.125 dia"|-||-|||-||MOJETPLSTWH|,|20MAMIINSTWH|,|MOMO JET PLATINUM STEERING WHEEL|,|MOM-JET35BK0S|,|345.00|,|296.02|,||,||,|0.000 |,||,||,||,|MOMO JET PLATINUM STEERING WHEEL
MOMO's new series of Jet steering wheels add new colors and vibrant designs to the line.
The Cobalt, Gold and Platinum finishes match similar colors MOMO has recently released in the Airleather shift boots and Shadow shift knobs.
The Cobalt wheel has color-shift inserts at the thumbs and horn ring.
The Gold has wood inserts and the Platinum has silver-brushed finish thumb inserts and horn ring.
All of the MOMO Jet wheels are manufactured using Top Grain leather with Airleather™ inserts and anatomic grips.
The centers are aluminum with non-corroding finish and machined MOMO logo.
CLICK ON THE PHOTO FOR A LARGER VIEW!
Quick look at the MOMO Jet Steering Wheel:
Rim Color: Black perforated leather and carbon fiber inserts.
Color: Platinum
Spoke: Black
Size: 350mm
Made in Italy
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOJETSTWH|,|NBINVIALL|,|MOMO JET STEERING WHEEL|,|MOM-JET35BK0B|,|380.00|,|296.95|,||,||,|0.000 |,||,||,||,|MOMO JET STEERING WHEEL
MOMO's new series of Jet steering wheels add new colors and vibrant designs to the line.
The Cobalt, Gold and Platinum finishes match similar colors MOMO has recently released in the Airleather shift boots and Shadow shift knobs.
The Cobalt wheel has color-shift inserts at the thumbs and horn ring.
The Gold has wood inserts and the Platinum has silver-brushed finish thumb inserts and horn ring.
All of the MOMO Jet wheels are manufactured using Top Grain leather with Airleather™ inserts and anatomic grips.
The centers are aluminum with non-corroding finish and machined MOMO logo.
CLICK ON THE PHOTO FOR A LARGER VIEW!
The MOMO Jet wheels are now available.
Place your orders now!
|,|"Select Size" "Select Here" "320mm" "350mm"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOLEDDADRLI|,|SHOP-BY-TOP-MIATA-BRANDS-MOMO|,|MOMO LED Daytime Driving Lights|,||,||,||,||,||,||,||,||,||,||,|||-||MOMISTWH|,|NBINVIALL|,|MOMO MILLENIUM STEERING WHEEL |,|MOM-MIL35BK1P|,|390.00|,|299.95|,||,||,|0.000 |,||,||,||,|MOMO MILLENIUM STEERING WHEEL
Momo's Italian Millenium Performance Accessories are made from the
utmost quality materials to bring your vehicle maximum style and class. Add some of your personal style to your interior with Momo's Millenium Steering Wheel. Each wheel has the Momo name on it to guarantee its authenticity. Wheel diameter measures 13.8" and is made of genuine black leather and aluminum.
Rim Color : Perforated leather and chrome inserts.
Color: Black
Size: 350mm
Spoke: Polish
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-MOD-101-STWH|,|NBINVIALL|,|MOMO MOD 27 CUT STEERING WHEEL|,|R1925C-27S|,|252.95|,|229.95|,||,||,|0.000 |,||,||,||,|MOMO MOD 27 CUT STEERING WHEEL
-270mm
Styled after the popular Momo Mod 27 steering wheel, the Model 27-C features a cut-away top section for easy mounting of a dash or gauges. The D-shaped wheel allows for optimum leg clearance in formula racers, while the ovalized 35x25mm grip allows for excellent ergonomics and grip.
Note: This wheel is NOT pre-drilled. Drilling required for installation! Designed to fit all 3-hold Quick-Release adapters with a maximum mounting diameter of 60mm.
Diameter: 270 mm (195 mm height)
Dish: None
Fabric: Black Suede Leather
Spokes: 3 - Black
Mounting: Not drilled, Max 60mm diameter hub
Part Number: MOMOD27C 270MM
Manufacturer: R1925C/27S
|,|||-||MOMO-MOD-30-STWH|,|20MAMIINSTWH|,|MOMO MOD 30 STEERING WHEEL |,|R196032S|,|362.95|,|268.02|,||,||,|0.000 |,||,||,||,|MOMO MOD 30 STEERING WHEEL - FREE SHIPPING
PRODUCT DESCRIPTION
-320mm
- 12,64” (321 mm) - Anatomic grip rim section - Can be used with MOMO hub - Black Suede
Additional Information
Style: GT - Touring Color: Black Material: Suede Spoke Finish: Black
Diameter:12,64” (321 mm) Rim diameter:1,32” x 0,98” (33,5 mm x 25 mm) Dish:1,54” (39 mm) Weight: 1,98 lbs (0,9 Kg)
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-MOD-31-STWH|,|20MAMIINSTWH|,|MOMO MOD 31 STEERING WHEEL |,|R193032S|,|322.95|,|248.02|,||,||,|0.000 |,||,||,||,|MOMO MOD 31 STEERING WHEEL - FREE SHIPPING
PRODUCT DESCRIPTION
-320MM or 340MM
-Round wheel section -Center punched on back of the wheel -Suede
MOMO wheels that are not pre-drilled will not fit MOMO hubs. They are designed to fit 3-hole quick-release adaptors with a maximum diameter of 60mm.
|,|"Select Size" "Select Here" "320MM" "340MM"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-MOD-69-STWH|,|20MAMIINSTWH|,|MOMO MOD 69 STEERING WHEEL |,|R191335S|,|362.95|,|258.02|,||,||,|0.000 |,||,||,||,|MOMO MOD 69 STEERING WHEEL - FREE SHIPPING!!!
Product Description
-350mm
Round wheel section -Finger grooves on rear half of wheel -Can be used with MOMO hub -Includes horn button -Suede. A MOMO hub is required for installation.
Additional Information Style: GT - Touring Color: Black Material: Suede Spoke Finish: Black Horn: Matte Black, MOMO Diameter: 13.78 in (350 mm) Rim Diameter: 1.1 in (28 mm) Dish: 1.46 in (37 mm) Weight: 2.90 lbs
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOD78RAWH|,|NBINVIALL|,|MOMO MOD 78 RALLY STEERING WHEEL|,|MOM-R1909_33L|,|370.00|,|258.02|,||,||,|0.000 |,||,||,||,|MOMO MOD 78 RALLY STEERING WHEEL
MOMO competition steering wheels are specifically designed and manufactured for rally, Touring and GT motorsport requirements. Anticorodal aluminum structure. Covering in leather or suede, glued and not sewn. Various diameters and depths available for individual requirements.
|,|"Select Size" "350mm" "330mm"|-||-|"Select Finish" "Suede" "Leather"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-MOD-80-EVO-STWH|,|20MAMIINSTWH|,|MOMO MOD 80 EVO STEERING WHEEL - SUEDE |,|MOM-R1980-35S|,|381.95|,|287.02|,||,||,|0.000 |,||,||,||,|MOMO MOD 80 EVO STEERING WHEEL
Product Description
-350mm
Anatomic grip rim section Thumb buttons for horn Top Grain Leather or Suede Can be used with MOMO hub
Additional Information Style: GT - Touring Color: Black Material: Suede Spoke finish: Black Horn: Small Red, Thumb (2) Diameter: 13.78 in (350 mm) Rim Diameter: 1.1 in (28 mm) Dish: 1.38 in (35 mm) Weight: 3.15 lbs (1.429 kg) lbs (1.429 kg
|,|||-||MOMO-MOD-80-STWH|,|20MAMIINSTWH|,|MOMO MOD 80 STEERING WHEEL |,|R198035L|,|361.95|,|282.02|,||,||,|0.000 |,||,||,||,|MOMO MOD 80 STEERING WHEEL - FREE SHIPPING
PRODUCT DESCRIPTION
-350MM
13.8 inches -Anatomic grip rim section -Thumb buttons for horn / accessories -Can be used with MOMO hub -Top Grain Leather
|,|"Select Options" "Select Here" "LEATHER" "SUEDE"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-MOD-88-STWH|,|20MAMIINSTWH|,|MOMO MOD 88 STEERING WHEEL |,|R198832S|,|362.95|,|268.02|,||,||,|0.000 |,||,||,||,|MOMO MOD 88 STEERING WHEEL - FREE SHIPPING
Product Description
The MOD 88 takes all of the attributes of the best selling MOD 78, the anatomic grips, comfortable oval rim, hub adaptable,and adds a flat bottom for extra leg clearance. Available in black suede and includes a MOMO horn button. A MOMO hub is required for installation.
Additional Information Style: GT - Touring Color: Black Material: Suede Spoke Finish: Black Horn: Matte Black, MOMO Diameter: 12.6 in (320 mm) ; 13.78 in (350 mm) Rim Diameter: 1.02 x 1.3 in (26 x 33 mm) Dish: 1.46 in (37 mm) Weight: 2.65 lbs (1.202 kg) for 320mm Versions; 2.9 lbs (1.315 kg) for 350mm Versions
|,|"Select Size" "Select Here" "320MM" "350MM"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-MOD-DRIFT-STWH|,|20MAMIINSTWH|,|MOMO MOD DRIFT STEERING WHEEL|,|R190733S|,|382.95|,|258.02|,||,||,|0.000 |,||,||,||,|MOMO MOD DRIFT STEERING WHEEL
-330mm
-Black Suede
Product Description The MOD Drift provides the perfect interface for driver to car. The deep dish and 330 mm diameter place the wheel in an optimal position for the quick steering adjustments required in Drifting. The generous round grip maintain comfort while the dual yellow markers provide quick reference guides. A MOMO hub is required for installation.
Additional Information Style: GT - Touring Color: Black Material: Suede Spoke Finish: Black, Silver Horn: Matte Black, MOMO Diameter: 12.99 in (330 mm) Rim Diameter: 1.1 in (28 mm) Dish: 3.54 in (90 mm) Weight: 2.55 lbs
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMOD7STWHFR|,|NASTWH|,|MOMO MOD.07 Black 350 MM Leather Steering Wheel |,|MOMO-R1905-35L|,|369.00|,|267.02|,||,||,|0.000 |,||,||,||,| 
MOMO MOD.07 Black 350 MM Leather Steering Wheel - FREE SHIPPING!!!
• 350MM / 13.8 inches
• Round section rim
• 70MM dish
• Can be used with MOMO Hub
• Includes horn button
• Top Grain Leather
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMOSTWH|,|20MAMIINSTWH|,|MOMO MOD.07 Black 350 MM Suede Steering Wheel |,|R1905-35S|,|320.00|,|248.02|,||,||,|0.000 |,||,||,||,|MOMO MOD.07 Black 350 MM Suede Steering Wheel
350mm (13.8") Black Suede Momo steering wheel. This wheel is deep dish design wheel, so it will bring the wheel rougly 1.2" closer to you than a flat Momo steering wheel like a model 78.
3 Spoke, Black Suede design, with imbedded yellow top center stripe.
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-MOD-08|,|20MAMIINSTWH|,|MOMO MOD.08 Black 350 MM Leather|,|R1908-35L-R1908-35B|,|368.00|,|258.02|,||,||,|0.000 |,||,||,||,|MOMO MOD.08 BLACK 350 MM LEATHER
-350MM / 13.8 inches
-Round section rim
-90MM dish
-Can be used with MOMO Hub
-Includes horn button
-Black or Blue Spoke
-Top Grain Leather or Suede
Spoke Finish-Blue or Black
Diameter-13.78 in (350 mm)
Grip thicknes-1.18 in (30 mm)
Weight-2.65 lbs (1.202 kg)
Dish-85 mm
|,|"Select Material" "Select Here" "Black Leather, Black Spoke" "Black Leather, Blue Spoke add(+$75)"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-MOD-08-BLK-SP-SUEDE-350-MM|,|20MAMIINSTWH|,|MOMO MOD.08 Black 350 MM Suede|,|R1908-35S-R1908-35SB|,|360.00|,|258.02|,||,||,|0.000 |,||,||,||,|MOMO MOD.08 Black 350MM Suede
-350MM / 13.8 inches
-Round section rim
-90MM dish
-Can be used with MOMO Hub
-Includes horn button
-Black or Blue Spoke
-Top Grain Leather or Suede
Spoke Finish-Blue or Black
Diameter-13.78 in (350 mm)
Grip thicknes-1.18 in (30 mm)
Weight-2.65 lbs (1.202 kg)
Dish-85 mm
|,|"Color" "Black"|-||-|"Material" "Black Suede, Black Spoke" "Black Suede, Blue Spoke"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO78STWH|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MOMO MOD.78 Black 350 MM Suede Steering Wheel |,|R1909-35S|,|240.00|,|229.95|,||,||,|0.000 |,||,||,||,|MOMO MOD.78 Black 350 MM Suede Steering Wheel
Momo model 78 350mm steering wheel. This is the perfect size for the Miata. It is about 1" smaller in diameter than the stock steering wheel.
MOMO competition steering wheels are specifically designed and manufactured for Touring, GT motorsport, and Spec Miata and features: anticorodal aluminum structure, covering in leather or suede that is glued and not sewn for a seamless finish Various diameters available for individual requirements
|,|||-||MOMOCA32STWH|,|NBINVIALL|,|MOMO MONTE CARLO 320MM STEERING WHEEL |,|MOM-MCL32BK1B|,|385.00|,|248.99|,||,||,|0.000 |,||,||,||,|MOMO MONTE CARLO 320MM STEERING WHEEL
A Momo steering wheel is pure luxury in your hands. Each handcrafted steering wheel is made from the finest leather, wood, and metal available. Starting with a precision aluminum stamping, Momo adds comfortable padding with hand-sewn top-grade leather or rich wood is fitted and smoothed to perfection. Even the hand painting of the horn button screams quality throughout production.
All Momo steering wheels meet their exact manufacturing standards, and attention to every detail. For mounting, the Momo safety hub adapter is available for most applications, perfectly fits your Miata, while eliminating the usual horn and directional signal problems.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Stitching & Horn Button" "Select Here" "Black" "Red (MCL32BK3B) add(+$35)"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMOCASTWH|,|NBINVIALL|,|MOMO MONTE CARLO 350MM STEERING WHEEL |,|MOM-MCL35BK1B|,|285.00|,|249.98|,||,||,|0.000 |,||,||,||,|MOMO MONTE CARLO 350MM STEERING WHEEL
A Momo steering wheel is pure luxury in your hands. Each handcrafted steering wheel is made from the finest leather, wood, and metal available. Starting with a precision aluminum stamping, Momo adds comfortable padding with hand-sewn top-grade leather or rich wood is fitted and smoothed to perfection. Even the hand painting of the horn button screams quality throughout production.
All Momo steering wheels meet their exact manufacturing standards, and attention to every detail. For mounting, the Momo safety hub adapter is available for most applications, perfectly fits your Miata, while eliminating the usual horn and directional signal problems.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Stitching & Horn Button" "Select Here" "Black" "Red (MCL35BK3B) add(+$35)"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MCL35AL1B|,|20MAMIINSTWH|,|MOMO MONTE CARLO Steering Wheel Black Alcantara|,|MCL35AL1B|,|369.45|,|279.90|,||,||,||,||,||,||,|MOMO Monte Carlo Steering Wheel Black Alcantara
Since the 60's the Momo steering wheel has made the Italian brand famous all over the world. The design of each Momo steering wheel is the result of accurate ergonomic studies, the scent of fine leather, the harmony of every detail and the choice of the best materials. The Monte Carlo steering wheel was created with top gain black leather and a generous anatomic grip. It showcases a black spoke and red horn button.
Features:
Color: Black
Material: Coating Material
Spoke Finish: Black
Stitch: Black
Horn: Small Black
Diameter: 320 or 350 mm
Dish: 40mm
Grip Section: 32 x 28mm
A MOMO hub is required for installation
|,|"Select Size" "Select Here" "320 mm" "350 mm add(+$20)"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||AIRBAG-RESISTOR|,|20MAMIINSTWH|,|MOMO Nardi-Personal NRG Steering Wheel Airbag Resistor Kit |,|airbag-resistor|,|39.99|,|23.02|,||,||,||,||,||,||,|MOMO Nardi-Personal NRG Steering Wheel Airbag Resistor Kit
|,|"Select Steering Wheel Brand" "Select Here" "Momo" "Nardi-Personal" "NRG add(+$5)"|-||-|||-||MOMONERO|,|20MAMIINKN|,|MOMO NERO SHIFT KNOB |,|MOM-NERBK1|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO Nero Shift Knob
Product Description:
Top Grain Black leather with black enamel insert and rubberized momo logo top, Yellow MOMO emblem and black collar.
Also available for reverse lock-out.
Additional Information:
Color: Black
Material: Leather
Height: 2.83 in (72 mm)
Diameter: 2.09 in (53 mm)
Insert: 2.36 in (60 mm)
Weight: 7.3 oz (207 g)
|,|||-||MONESTWH|,|NBINVIALL|,|MOMO NERO STEERING WHEEL |,|MOM-NER35BK0B|,|330.00|,|284.95|,||,||,|0.000 |,||,||,||,|MOMO NERO STEERING WHEEL
A Momo Nero steering wheel is pure luxury in your hands. Each handcrafted steering wheel is made from the finest leather, wood, and metal available. Starting with a precision aluminum stamping, Momo adds comfortable padding with hand-sewn top-grade leather or rich wood is fitted and smoothed to perfection. Even the hand painting of the horn button screams quality throughout production. All Momo steering wheels meet their exact manufacturing standards, and attention to every detail. For mounting, the Momo safety hub adapter is available for most applications, perfectly fits your vehicle, while elminating the usual horn and directional signal problems.
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MONESTWHSHKN|,|SHOP-BY-TOP-MIATA-BRANDS-MOMO-SUPER-PACKAGE-DEALS|,|MOMO NERO STEERING WHEEL AND SHIFT KNOB|,|MOM-NEROSET|,|460.00|,|398.90|,||,||,|0.000 |,||,||,||,|MOMO NERO STEERING WHEEL AND SHIFT KNOB
The NERO kit from MOMO provides enthusiasts with products that are designed to give a cohesive look to your vehicle’s interior for the ultimate in customization.
NERO consists of a 350mm leather and suede steering wheel with a gloss and matte black center pad for a stealthy look, a round shift knob in leather, enamel and “soft touch” accents.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO|,|SHOP-BY-TOP-MIATA-BRANDS|,|MOMO PRODUCTS|,||,||,||,||,||,||,||,||,||,||,|||-||MOPRSISTWH|,|NBINVIALL|,|MOMO PROTOTIPO SILVER STEERING WHEEL |,|MOM-PRO35BK0S|,|395.00|,|268.99|,||,||,|0.000 |,||,||,||,|MOMO PROTOTIPO SILVER STEERING WHEEL
Tradition is back! The legendary PROTOTIPO steering wheel, one of the greatest best seller products in MOMO history, is now again available.
In 350 mm diameter, with black leather crown and spokes in silver or black colour tone, MOMO PROTOTIPO steering wheel is the most significant example of the vintage style. It's elegant and stylish design with lightened aluminium spokes makes it a great classic of MOMO sports tradition.
Color: Black
Size: 350mm
Spoke: Silver
Made in: Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOPRSTWH|,|NBINVIALL|,|MOMO PROTOTIPO STEERING WHEEL |,|MOM-PRO35BK2B|,|395.00|,|268.95|,||,||,|0.000 |,||,||,||,|MOMO PROTOTIPO STEERING WHEEL
Tradition is back! The legendary PROTOTIPO steering wheel, one of the greatest best seller products in MOMO history, is now again available.
In 350 mm diameter, with black leather crown and spokes in silver or black colour tone, MOMO PROTOTIPO steering wheel is the most significant example of the vintage style. It's elegant and stylish design with lightened aluminium spokes makes it a great classic of MOMO sports tradition.
Color: Black
Size: 350mm
Spoke: Black
Made in: Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|"Select Color" "Select Here" "Black" "Heritage Silver add(+$65)"|-||-|||-||MOQUSTWHBLFR|,|NBINVIALL|,|MOMO QUARK BLACK STEERING WHEEL|,|MOM-QRK35BK0B|,|240.00|,|198.02|,||,||,|0.000 |,||,||,||,|MOMO QUARK BLACK STEERING WHEEL
Black urethane with colored Top Grain leather inserts.
Additional Information
* Style-Tuning
* Color-Black
* Material-Urethane
* Spoke Finish-Black
* Horn-Black
* Diameter-13.78 in (350 mm)
* Rim Diameter-1.1 x 1.26 in (28 x 32 mm)
* Anatomic Grip Diameter-1.77 x 1.5 in (45 x 38 mm)
* Weight-7.17 lbs (3.25 kgs)
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOQUSTWHREFR|,|NBINVIALL|,|MOMO QUARK RED STEERING WHEEL |,|MOM-QRK35BK0R|,|240.00|,|198.02|,||,||,|0.000 |,||,||,||,|MOMO QUARK RED STEERING WHEEL
Black urethane with colored Top Grain leather inserts.
Additional Information
* Style-Tuning
* Color-Black
* Material-Urethane
* Spoke Finish-Black
* Horn-Black
* Diameter-13.78 in (350 mm)
* Rim Diameter-1.1 x 1.26 in (28 x 32 mm)
* Anatomic Grip Diameter-1.77 x 1.5 in (45 x 38 mm)
* Weight-7.17 lbs (3.25 kgs)
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOQUSHKNBLFR|,|20MAMIINKN|,|MOMO QUARK SHIFT KNOB BLACK |,|MOM-QRKBK1|,|105.00|,|95.99|,||,||,|0.000 |,||,||,||,|MOMO QUARK SHIFT KNOB BLACK
Fits Fits most 4/5/6 speed manual shift vehicles with a 16 mm or less shaft diameter.
* Color-Finish Black Urethane
* Black Airleather Insert
Warranty: We are a true authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||MOMRACAIRAL|,|20MAMIINKN|,|MOMO RACE AIRLEATHER ALUMINUM SHIFT KNOB|,|MOM-ALUAIR|,|145.00|,|109.00|,||,||,|0.000 |,||,||,||,|MOMO RACE AIRLEATHER ALUMINUM SHIFT KNOB
MOMO's Race Airleather shift knob has a classic styling and design. Its round shift knob offers a perfect comfortable grip. Each knob is made of perforated leather and aluminum, and has the Momo logo on it. The MOMO Race Airleather is 2.75" tall 2" diameter and weighs 5 ounces. Like most MOMO shift knobs, this is a universal fit and will fit all manual transmission equipped vehicles with shift shafts up to 15mm in diameter.
All MOMO shift knobs are precision crafted in Italy using only the finest materials. MOMO knobs are designed to last the life of your vehicle and offer a perfectly weighted feel for precise shifting. Each MOMO knob is engineered and tested to provide a comfortable grip for any size hand. Set screws and rubber washers are included for easy installation. MOMO shift knobs are designed to work on manual transmission cars and trucks only.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||MOMRACAIR|,|20MAMIINKN|,|MOMO RACE AIRLEATHER SHIFT KNOB|,|MOM-RACAIR|,|135.00|,|109.00|,||,||,|0.000 |,||,||,||,|MOMO RACE AIRLEATHER BLACK SHIFT KNOB
Made of Strong, Light-weight Aluminum and Real Italian Stitched, perforated Black Leather
Provides the ultimate sports car feel
Add a Very Stylish, Trick, Race look and feel to your interior!
These are universal and fit most all Manual Transmission vehicles
Extremely easy to install on most applications
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-RACING-PRODUCTS|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|MOMO RACING PRODUCTS|,||,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-RACING-SEATS|,|NBINSEDO|,|MOMO RACING SEATS|,||,||,||,||,||,||,||,||,||,||,|||-||MORESTWH|,|NBINVIALL|,|MOMO RETRO STEERING WHEEL |,|MOM-RET36BK2S|,|380.00|,|269.90|,||,||,|0.000 |,||,||,||,|MOMO RETRO STEERING WHEEL
Here is one for the classic car enthusiast! MOMO announces the new Retro steering wheel.
Available in a larger 360mm diameter and with clean design touches such as: hidden screws, smooth Top Grain leather, contrast white stitching and silver spokes. A 28mm grip and finger grooves on the back of the wheel provide a comfortable grip.
MOMO USA will be receiving a limited number of this exciting new product. Order Today!
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOSHCA|,|20MAMIINKN|,|MOMO SHADOW CARBON SHIFT KNOB|,|MOM-SUBKCA|,|125.00|,|109.95|,||,||,|0.000 |,||,||,||,|MOMO SHADOW CARBON SHIFT KNOB
MOMO Shadow Shift Knob with it’s black leather base and carbon-look top, is anything but understated. The Shadow's black color and carbon fiber head gives it a powerful performance look, yet the shift knob doesn't stand out - instead blending into the background of your interior.
The Shadow is one of MOMO's best-sellers, and for good reason too! The shadow is 4" tall, the head is approximately 2" x 1.75" and it weighs 3.3 ounces.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a tight fit adapter add (+$44.95)"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-SHIFT-BOOTS|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MOMO SHIFT BOOTS:|,||,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-SHIFT-KNOBS|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MOMO SHIFT KNOBS|,||,||,||,||,||,||,||,||,||,||,|||-||MOMO-SK50-SHIFT-KNOB|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MOMO SK50 Shift Knob|,|POSK50SILVER|,|104.95|,|89.90|,||,||,|0.000 |,||,||,||,|MOMO SK50 Shift Knob
Product Description:
SK50, the ultimate racing essence of Momo style, derived from our motorsport experience. Full aluminum body machined shift knob with anodized glossy silver finish. The top pad printed Momo logo, together with its essential design, provides a true racing look to your car.
Additional Information
Color:Silver
Material: Aluminium
Height: 2.95 in (75 mm)
Diameter: 1.57 in (40 mm)
Weight: 8.1 oz (226 g)
|,|||-||MOMOSPACER|,|20MAMIINSTWH|,|MOMO SPACER|,|SPACER|,|49.99|,|44.95|,||,||,|0.000 |,||,||,||,|
MOMO 1/2 Inch Spacer for Mazda Miata.
Call Customer Service for other colors or MOMO special orders
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-STEERING-WHEELS|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MOMO STEERING WHEELS|,||,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-STICKERS|,|SHOP-BY-TOP-MIATA-BRANDS-MOMO|,|MOMO STICKERS|,||,||,||,||,||,||,||,||,||,||,|||-||MOMO-SUEDE-BRUSH|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|MOMO SUEDE BRUSH|,|SUEDEBRUSH|,|19.95|,|14.50|,||,||,|0.000 |,||,||,||,|MOMO SUEDE BRUSH
Keep your suede steering wheel clean with the Momo Steering wheel brush. Brass brush helps remove stubborn dirt from the suede leather, while the rubber back helps maintain the soft feel.
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-SUPER-PACKAGE-DEALS|,|20MAMIINKN|,|MOMO SUPER PACKAGE DEALS|,||,||,||,||,||,||,||,||,||,||,|||-||MOTESTWH|,|NBINVIALL|,|MOMO TEAM 280MM STEERING WHEEL |,|MOM-TEA28BK0B|,|370.00|,|259.99|,||,||,|0.000 |,||,||,||,|MOMO TEAM 280MM STEERING WHEEL
MOMO's Team scaled down size provides lightning quick turning response modeled after serious race cars. MOMO steering wheels are precision crafted in Italy using only the finest materials and are designed to last the life of your vehicle. Give your ride that race car look and feel with a MOMO steering wheel.
Installing a MOMO steering wheel requires the removal of your factory steering wheel. A hub adapter is required for installation (sold separately and available for most vehicles, including the Mazda Miata). MOMO steering wheels are intended for show, race, or off-road use vehicles ONLY! Go Miata does Not assumes any responsibility for damages or injuries resulting from the removal or tampering of the factory airbag restraint system.
For vehicles equipped with airbags, professional installation is recommended. Changing your factory OEM steering wheel to the MOMO steering wheel will disable your vehicle's air bag and may lose horn and/or cruise control function.
Rim Color: Black perforated leather.
Color: Black
Size: 280mm
Spoke: Black
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOTE30STWH|,|NBINVIALL|,|MOMO TEAM 300MM STEERING WHEEL |,|MOM-TEA30BK0B|,|370.00|,|248.95|,||,||,|0.000 |,||,||,||,|MOMO TEAM 300MM STEERING WHEEL
MOMO's Team scaled down size provides lightning quick turning response modeled after serious race cars. MOMO steering wheels are precision crafted in Italy using only the finest materials and are designed to last the life of your vehicle. Give your ride that race car look and feel with a MOMO steering wheel.
Installing a MOMO steering wheel requires the removal of your factory steering wheel. A hub adapter is required for installation (sold separately and available for most vehicles, including the Mazda Miata). MOMO steering wheels are intended for show, race, or off-road use vehicles ONLY! Go Miata does Not assumes any responsibility for damages or injuries resulting from the removal or tampering of the factory airbag restraint system.
For vehicles equipped with airbags, professional installation is recommended. Changing your factory OEM steering wheel to the MOMO steering wheel will disable your vehicle's air bag and may lose horn and/or cruise control function.
Color: Black
Size: 300mm
Spoke: Black
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOMO-TOM-CAT-STWH|,|NBINVIALL|,|MOMO TOMCAT STEERING WHEEL|,|TOM35BK0S|,|289.95|,|259.95|,||,||,|0.000 |,||,||,||,|MOMO TOMCAT STEERING WHEEL
-350mm
PRODUCT DESCRIPTION
Top Grain black leather and leather insert. Anthracite spokes and black button. Silver spoke with horn trim ring.
Color Black Material leather Stitch Black Spoke Finish Anthracite Horn Black Ring Silver Screw Stainless Diameter 13.78 in (350 mm) Grip thickness 1.02 x 1.22 in (26 x 31 mm) Weight 3.45 lbs (1.56 kgs) for 280mm version Dish n/a
|,|||-||MOTRRSTWH|,|NBINVIALL|,|MOMO TREK - R STEERING WHEEL |,|MOM-TRK-R35BK0B|,|390.00|,|304.02|,||,||,|0.000 |,||,||,||,|MOMO TREK - R STEERING WHEEL
The MOMO Trek R steering wheel comes 350mm (13.8") diamter and is wrapped in black leather with silver anodized side spokes and a chrome lower spoke. The horn button is a bright metalic finish and the leather on the grip area on the sides is perforated.
MOMO TREK - R STEERING WHEEL
Rim Color: Brilliant matt finish.
Color: Black
Size: 350mm
Spoke: Chrome
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOTRGRSTWH|,|NBINVIALL|,|MOMO TREK GRAY STEERING WHEEL|,|MOM-TRK35BK0G|,|385.00|,|292.02|,||,||,|0.000 |,||,||,||,|MOMO TREK GRAY STEERING WHEEL
Momo's Italian Performance Accessories are made from the utmost quality materials to bring your vehicle maximum style and class. Add some of your personal style to your interior with Momo's Trek Series Steering Wheels. Each wheel has the Momo name on it to guarantee its authenticity. Wheel diameter measures 13.8" and is made of Black Perforated Leather and Aluminum with matching color alcantara top ring and yellow MOMO stitching.
Rim Color: Black perforated leather.
Size: 350mm
Spoke: Gray
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOTRREDSTWH|,|NBINVIALL|,|MOMO TREK RED STEERING WHEEL |,|MOM-TRK35BK0R|,|385.00|,|298.02|,||,||,|0.000 |,||,||,||,|MOMO TREK RED STEERING WHEEL
Momo's Italian Performance Accessories are made from the utmost quality materials to bring your vehicle maximum style and class. Add some of your personal style to your interior with Momo's Trek Series Steering Wheels. Each wheel has the Momo name on it to guarantee its authenticity. Wheel diameter measures 13.8" and is made of Black Perforated Leather and Aluminum with matching color alcantara top ring and yellow MOMO stitching.
Rim Color: Black perforated leather.
Size: 350mm
Spoke: Red
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOTRSTWH|,|NBINVIALL|,|MOMO TREK STEERING WHEEL|,|MOM-TRK35BK0B|,|385.00|,|298.02|,||,||,|0.000 |,||,||,||,|MOMO TREK STEERING WHEEL
Momo's Italian Performance Accessories are made from the utmost quality materials to bring your vehicle maximum style and class. Add some of your personal style to your interior with Momo's Trek Series Steering Wheels. Each wheel has the Momo name on it to guarantee its authenticity. Wheel diameter measures 13.8" and is made of Black Perforated Leather and Aluminum with matching color alcantara top ring and yellow MOMO stitching.
Rim Color: Black perforated leather.
Size: 350mm
Spoke: Black
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOTUSISTWH|,|NBINVIALL|,|MOMO TUNER SILVER STEERING WHEEL|,|MOM-TUN35BK0S|,|345.00|,|238.02|,||,||,|0.000 |,|Usually ships the same business day|,||,||,|MOMO TUNER SILVER STEERING WHEEL
The MOMO Tuner steering wheel comes in your choice of black or metallic gray anodized aluminum spokes. Both feature a smooth black leather wrapped rim. The black spoked wheel comes with red stitching and a black horn button. The gray spoked wheel comes with black stitching and a silver horn button.
Quick look at the MOMO Tuner Steering Wheel:
Color: Black (red stitch)
Size: 350mm
Spoke: Anthracite
Made in Italy
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Size" "350mm Stadard"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||MOTUSTWH|,|NBINVIALL|,|MOMO TUNER STEERING WHEEL|,|MOM-TUN35BK0B|,|395.00|,|254.02|,||,||,|0.000 |,||,||,||,|MOMO TUNER STEERING WHEEL
The MOMO Tuner steering wheel comes in your choice of black or metallic gray anodized aluminum spokes. Both feature a smooth black leather wrapped rim. The black spoked wheel comes with red stitching and a black horn button. The gray spoked wheel comes with black stitching and a silver horn button.
CLICK ON THE PHOTO FOR A LARGER VIEW!
|,|"Select Size" "Select Here" "320mm" "350mm"|-||-|"Select Hub Kit" "No Hub Kit" "With Miata Hub Kit #5702 add (+$103)"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-MOMO-WHEELS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|MOMO WHEELS|,||,||,||,||,||,||,||,||,||,||,|||-||XTREME-PRO|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|MOMO XTREME PRO GLOVE |,|xtreme-pro|,|165.90|,|149.90|,||,||,||,||,||,||,|MOMO XTREME PRO GLOVE
Professional pre-curved glove made in soft, stretch fire resistant nomex. Xtreme Pro is studied to offer a perfect fit, thanks to its ergonomic shape. The silicone coated palm guarantees optimum performance thanks to the grip provided by the newest generation of materials. The new stitching path on the thumb is designed for the most comfortable grip, even in endurance races. Colors: Black, red, blue and grey.Professional pre-curved glove made in soft, stretch fire resistant nomex. Xtreme Pro is studied to offer a perfect fit, thanks to its ergonomic shape. The silicone coated palm guarantees optimum performance thanks to the grip provided by the newest generation of materials. The new stitching path on the thumb is designed for the most comfortable grip, even in endurance races.
Colors: Black, red, blue and grey.
|,|"Select Color" "Select Here" "Black" "Red" "Blue" "Grey"|-||-|||-||MOCO99|,|19MAMIAIRFIA|,|MonsterFlow CoolBox Polished 1999-2005|,|GWR-641|,|109.99|,|98.95|,||,||,|0.000 |,||,||,||,|MonsterFlow CoolBox Polished 1999-2005
This CoolBox, designed exclusively for the MonsterFlow Intake, isolates the intake filter from engine heat and lowers the air temperature entering the engine, thus producting more power. Available in Black, or Polished stainless steel finish.
See Don't Miss section for Black.
Polished finish is shown.
|,|||-||MOINPFI99|,|19MAMIAIRFIA|,|MonsterFlow Polished Intake 1999-2005|,|GWR-625|,|229.99|,|189.00|,||,||,|0.000 |,||,||,||,|Polished version of the Monsterflow intake, looks great and runs great. Shown here in picture with the optional Polished CoolBox. This original intake designed for the second generation Miata helps increase HP and gives a much snappier throttle response.
CARB legal! This is a fantasitc intake for 1999-2005 Miatas. You'll love the performance increase in your Miata!
** Not Available at this time by the manufacture, come back soon for availability **
|,|||-||MOTUL|,|SHOP-BY-TOP-MIATA-BRANDS|,|Motul|,||,||,||,||,||,||,||,||,||,||,|||-||MOGE30075SYB|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 300 75w90 100% Synthetic Gear Oil 1-Liter Bottle|,|MTL-105777|,|42.90|,|29.02|,||,||,|0.000 |,||,||,||,|Motul 300 75w90 Gear Oil 1-Liter Bottle
100% Synthetic – Ester based
TYPE OF USE
Specially designed for racing vehicle gearboxes : speed way, rally, raid… All mechanical transmission, synchronised or not synchronised gearboxes, gearbox/differential, transfer gearboxes and hypoïd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.
PERFORMANCE
STANDARDS API GL4 and GL5 / MIL-L-2105D
100% synthetic extreme pressure lubricant for an efficient anti wear protection, a better resistance at high temperature and a longer life time.
0% shear loss : Unshearable oil film in extreme conditions.
Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard. Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears. Suitable for any type of seal and yellow material used in gearboxes design. Anti-corrosion, Anti-foam.
RECOMMENDATIONS
Oil change: According to manufacturers’ requirements and adjust according to your own use.
PROPERTIES
Viscosity grade SAE J306 75W-90
Density at 15°C (59°F) ASTM D1298 0.900
Viscosity at 40°C (104°F) ASTM D445 72.6 mm²/s
Viscosity at 100°C (212°F) ASTM D445 15.2 mm²/s
Viscosity index VIE ASTM D2270 222
Flash point ASTM D92 200°C / 392°F
Pour point ASTM D97 -60°C / -76°F
*Quantity One 1-liter bottle*
|,|"Shipping & Handling" "add(+$10)"|-||-|||-||MO300V0W10SY|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 300 V 0w20 100% Synthetic-Ester Racing Oil "High RPM" 2-Liter Can|,|MTL-824521|,|44.99|,|39.95|,||,||,|0.000 |,||,||,||,|Motul 300 V 0w20 100% Synthetic-Ester Racing Oil "High RPM" 2-Liter Can
Racing lubricant for racing cars
100% Synthetic – Double Ester Technology
TYPE OF USE
Racing cars with atmospheric or turbocharged engines, race or qualifying engines, requiring maximum
power output and fastest rev raisings : Qualifying sessions, drag racing, race on tracks, single brand
races, uphill races… Engine designed to run low viscosity lubricants and to minimise fuel dilution in the oil. Check with engine tuner before use. Other applications : Gasoline or diesel engines, turbocharged, direct injection and catalytic converters.
PERFORMANCE STANDARDS
Above existing standards.
Reference team Toyota Racing Development, Japan GT – Graff Racing, Formula Renault (open wheel cars, single brand race) Double Ester technology : maximum oil film resistance, balanced polarity, resistance at very high temperature. Friction Modifier : maximum power output, decrease operating temperature.
0% shear loss : Stable oil pressure whatever using conditions. Maximum anti-wear resistance.
Perfect engine cleanliness. Low viscosity grade 0W-20 reduces oil hydrodynamic friction, provides maximum power output mostly when oil is cold. Allows excellent oil flow into the engine, fastest oil pressure set up, faster revving and better engine warming.
RECOMMENDATIONS
Oil change : according to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Viscosity grade SAE J 300 0W-20
Density at 15°C (59°F) ASTM D1298 0.857
Viscosity at 100°C (212°F) ASTM D445 8.0 mm²/s
Viscosity at 40°C (104°F) ASTM D445 40.1 mm²/s
Viscosity index ASTM D2270 177
HTHS viscosity at 150°C (302°F) ASTM D4741 2.68 mPa.s
Pour point ASTM D97 -39°C / -38°F
Flash point ASTM D92 220°C / 428°F
TBN ASTM D 2896 11.3 mg KOH
*Quantity One 2-Liter Can*
|,|"Shipping & Handling" "add(+$10)"|-||-|||-||MO300V5W10SY|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 300 V 5w30 100% Synthetic-Ester Racing Oil "Power Racing" 2-Liter Can|,|MTL-825521|,|54.99|,|45.85|,||,||,|0.000 |,||,||,||,|Motul 300 V 5w30 100% Synthetic-Ester Racing Oil "Power Racing" 2-Liter Can
Racing lubricant for racing cars
100% Synthetic – Double Ester Technology
TYPE OF USE
Racing cars with atmospheric or turbocharged engines, race or qualifying engines, requiring maximum
power output and fastest rev raisings : Qualifying sessions, drag racing, race on tracks, Nascar, single
brand races, uphill races, rallyes…
Engine designed to run low viscosity lubricants and to minimise fuel dilution in the oil.
Other applications : Gasoline or diesel engines, turbocharged, direct injection and catalytic converters.
PERFORMANCE STANDARDS
Above existing standards.
Reference team NISMO NISSAN, Japan GT – Coloni Motorsport, Formula 3 (open wheel cars)
Double Ester technology : maximum oil film resistance, balanced polarity, resistance at very high temperature.
Friction Modifier : maximum power output, decrease operating temperature.
0% shear loss : Stable oil pressure whatever using conditions. Maximum anti-wear resistance.
Perfect engine cleanliness. Low viscosity grade 5W-30 allows excellent oil flow into the engine, fastest oil pressure set up, faster revving and engine response.
RECOMMENDATIONS
Oil change : according to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Viscosity grade SAE J 300 5W-30
Density at 15°C (59°F) ASTM D1298 0.871
Viscosity at 100°C (212°F) ASTM D445 11 mm²/s
Viscosity at 40°C (104°F) ASTM D445 65 mm²/s
Viscosity index ASTM D2270 162
HTHS viscosity at150°C (302°F) ASTM D4741 3.61 mPa.s
Pour point ASTM D97 -36°C / -33°F
Flash point ASTM D92 218°C / 424°F
TBN ASTM D 2896 11.3 mg KOH/g
*Quantity One 2-Liter Can*
|,|"Shipping and handing" "add(+$10)"|-||-|||-||MO300V5W10SY1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 300 V 5w40 100% Synthetic-Ester Racing Oil "Power" 2-Liter Can|,|MTL-825621|,|69.99|,|42.02|,||,||,|0.000 |,||,||,||,|Motul 300 V 5w40 100% Synthetic-Ester Racing Oil "Power" 2-Liter Can
Racing lubricant for racing cars
100% Synthetic – Double Ester Technology
TYPE OF USE
Racing cars with atmospheric or turbocharged engines, race engines operating in a wide range of rpm
and temperatures : race on tracks, single brand races, rallyes, uphill races…
Engine producing medium fuel dilution in the oil. Other applications : Gasoline or diesel engines, turbocharged, direct injection and catalytic converters.
PERFORMANCE STANDARDS
Above existing standards.
Reference team SUBARU WRT, World Rally championship –
Graff Racing, Formula Renault (open wheel cars, single brand race)
Double Ester technology : maximum oil film resistance, balanced polarity, resistance at very high
temperature. Friction Modifier : maximum power output, decrease operating temperature.
0% shear loss : Stable oil pressure whatever using conditions. Maximum anti-wear resistance.
Perfect engine cleanliness. 5W-40 grade allows excellent oil flow into the engine, fastest oil pressure set up, faster rev raisings and at the same time high oil pressure at high rpm and high temperatures.
RECOMMENDATIONS
Oil change : according to your own use.
Can be mixed with synthetic or mineral lubricants.
PROPERTIES
Viscosity grade SAE J 300 5W-40
Density at 15°C (59°F) ASTM D1298 0.905
Viscosity at100°C (212°F) ASTM D445 13.8 mm²/s
Viscosity at 40°C (104°F) ASTM D445 80.8 mm²/s
Viscosity Index ASTM D2270 176
HTHS viscosity at150°C (302°F) ASTM D4741 4.51 mPa.s
Pour point ASTM D97 -36°C / -33°F
Flash point ASTM D92 216°C / 420°F
TBN ASTM D 2896 10.9 mg KOH/g
*Quantity One 2-Liter Bottle*
|,|"Shipping" "add(+$10)"|-||-|||-||MO75TE11LBO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 75w90 Technosynthese(R) MotylGear Oil 1-Liter Bottle|,|MTL-317011|,|32.99|,|19.02|,||,||,|0.000 |,||,||,||,|Motul 75w90 Technosynthese(R) MotylGear Oil 1-Liter Bottle
TYPE OF USE
Specially recommended for gearboxes hard to shift and/or noisy gearboxes. All mechanical transmission, synchronised or not synchronised gearboxes, gearbox/differential, transfer gearbox and hypoïd differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.
PERFORMANCE
STANDARDS API GL4 and GL5 / MIL-L-2105D. Extreme pressure lubricant for an efficient anti wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time. Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard. Very high lubricating power which decreases friction and wear. 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears. Suitable for any type of seal and yellow material used in gearboxes design. Anti-corrosion, Anti-foam.
RECOMMENDATIONS
Oil change: According to manufacturers’ requirements and adjust according to your own use.
PROPERTIES
Viscosity grade SAE J306 75W-90
Density at 15°C (59°F) ASTM D1298 0.868
Viscosity at 40°C (104°F) ASTM D445 107.8 mm²/s
Viscosity at 100°C (212°F) ASTM D445 16.7 mm²/s
Viscosity index VIE ASTM D2270 171
Flash point ASTM D92 200°C / 392°F
Pour point ASTM D97 -45°C / -49°F
*Quantity is ONE 1-Liter Bottle*
|,|"Shipping" "add(+$10)"|-||-|||-||MO815WEC1BO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 8100 5w30 100% Synthetic Oil Eco-nergy 1-Liter Bottle|,|MTL-812311|,|19.99|,|14.95|,||,||,|0.000 |,||,||,||,|Motul 8100 5w30 Eco-nergy 1-Liter Bottles
Fuel Economy Gasoline and Diesel lubricant 100% Synthetic
TYPE OF USE
Fuel Economy Engine Oil especially designed for recent engines, powered by turbo Diesel direct
injection or gasoline engines, designed to use low friction and low HTHS (High Temperature High
Shear) viscosity oil. Suitable for new technology engines powered with turbo Diesel or gasoline engines and catalytic converters, requiring fuel economy lubricants (ACEA A1/B1 or A5/B5 standards).
These oils may be unsuitable for use in some engines. Refer to the owner manual or handbook if in
doubt.
PERFORMANCE STANDARDS
ACEA A5 / B5
APPROVALS API SL / CF
This 100% synthetic engine oil has been formulated, developed and tested according to the most recent technical requirements of petrol and diesel engines. The new performance ACEA A5/B5 requests fuel economy and low emission performance for powerful engines : MOTUL 8100 Eco-nergy 5W-30 has synthetic base stocks and specific friction modifier molecules that provide an outstanding oil film resistance, reducing friction in the engine,
maintaining the oil pressure, and generally decreasing the operating temperature. MOTUL 8100 Eco-nergy 5W-30 provides outstanding lubricating properties such as wear and high temperature resistance and controlled oil consumption. Anti-oxydation, Anti-wear, Anti-corrosion, Anti-foam properties.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
MOTUL 8100 Eco-nergy 5W-30 can be mixed with synthetic or mineral oils.
PROPERTIES
Viscosity grade SAE J 300 5W-30
Density at 15°C (59°F) ASTM D1298 0,852
Viscosity at 100°C (212°F) ASTM D445 10 mm²/s
Viscosity at 40°C (104°F) ASTM D445 57 mm²/s
Viscosity index ASTM D2270 163
Pour point ASTM D97 -36°C / -33°F
Flash point ASTM D92 226°C / 439°F
TBN ASTM D 2896 10,3 mg KOH/g
*Quantity One 1-liter bottle*
|,|"Drop Shipping & Handling" "add(+$10)"|-||-|||-||MO815WEC5BO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 8100 5w30 100% Synthetic Oil Eco-nergy 5-Liter Bottle|,|MTL-812351|,|69.89|,|44.93|,||,||,|5.000 |,||,||,||,|Motul 8100 5w30 Eco-nergy 5-Liter Bottle
Fuel Economy Gasoline and Diesel lubricant 100% Synthetic
TYPE OF USE
Fuel Economy Engine Oil especially designed for recent engines, powered by turbo Diesel direct
injection or gasoline engines, designed to use low friction and low HTHS (High Temperature High
Shear) viscosity oil. Suitable for new technology engines powered with turbo Diesel or gasoline engines and catalytic converters, requiring fuel economy lubricants (ACEA A1/B1 or A5/B5 standards).
These oils may be unsuitable for use in some engines. Refer to the owner manual or handbook if in
doubt.
PERFORMANCES STANDARDS
ACEA A5 / B5
APPROVALS API SL / CF
This 100% synthetic engine oil has been formulated, developed and tested according to the most recent technical requirements of petrol and diesel engines. The new performance ACEA A5/B5 requests fuel economy and low emission performance for powerful engines : MOTUL 8100 Eco-nergy 5W-30 has synthetic base stocks and specific friction modifier molecules that provide an outstanding oil film resistance, reducing friction in the engine,
maintaining the oil pressure, and generally decreasing the operating temperature. MOTUL 8100 Eco-nergy 5W-30 provides outstanding lubricating properties such as wear and high temperature resistance and controlled oil consumption. Anti-oxydation, Anti-wear, Anti-corrosion, Anti-foam properties.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
MOTUL 8100 Eco-nergy 5W-30 can be mixed with synthetic or mineral oils.
PROPERTIES
Viscosity grade SAE J 300 5W-30
Density at 15°C (59°F) ASTM D1298 0,852
Viscosity at 100°C (212°F) ASTM D445 10 mm²/s
Viscosity at 40°C (104°F) ASTM D445 57 mm²/s
Viscosity index ASTM D2270 163
Pour point ASTM D97 -36°C / -33°F
Flash point ASTM D92 226°C / 439°F
TBN ASTM D 2896 10,3 mg KOH/g
*Quantity One 5-liter bottle*
|,|||-||MO815WX1BO1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 8100 5w30 100% Synthetic Oil X-max 1-Liter Bottle|,|MTL-841411|,|44.99|,|28.02|,||,||,|0.000 |,||,||,||,|Motul 8100 5w30 X-max 1-Liter Bottle
High Power Gasoline and Diesel Engines
100% Synthetic - Ester based
TYPE OF USE
Lubricant especially designed for flexible drain intervals for BMW gasoline and diesel engines when a BMW Long Life-01 approved oil is required or Mercedes-Benz gasoline and diesel engines type 646, 647, 648 et 271…when MB calls for MB 229.5 engines oils. Also suitable for Volkswagen engines calling for VW502 00 or 505 00 engine oils.
PERFORMANCE STANDARDS
API SL/CF – ACEA A3/B4
APPROVALS
BMW Long Life-01
Mercedes-Benz page 229.3 and 229.5
Volkswagen VW 502 00 – 505 00
Lubricant specially designed for BMW Valvetronic engines, V8, 6 and 4 cylinders in line engines, and also for recent Mercedes-Benz engines or Volkswagen. Lubricant allowing extended and flexible drain intervals, low volatility, high efficiency, friction reduction, high resistance at high temperature met in modern engines. Anti-oxidation, Anti-wear, Anti-corrosion, Anti-foam properties. Formulation is perfect balance between outstanding lubrication (high HTHS > 3.5 mPa.s) and fuel economy linked to viscosity grade. Environmentally friendly.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations to be tuned to your own use. Can be mixed with synthetic and mineral oils.
PROPERTIES
Viscosity grade SAE J 300 5W-30
Density at 20°C (68°F) ASTM D1298 0.848
Viscosity at 100°C (212°F) ASTM D445 12.0 mm²/s
Viscosity at 40°C (104°F) ASTM D445 70.8 mm²/s
Viscosity index ASTM D2270 167
Pour point ASTM D97 -36°C / -32.8°F
Flash point ASTM D92 232°C / 449°F
TBN ASTM D2896 9.1 mg KOH/g
*Quantity One 1-Liter Bottle*
|,|||-||MO815WX1BO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 8100 5w40 100% Synthetic Oil X-cess 1-Liter Bottle|,|MTL-368211|,|24.99|,|14.02|,||,||,|0.000 |,||,||,||,|Motul 8100 5w40 X-cess 1-Liter Bottle
Gasoline and Diesel Engine Oil 100% Synthetic
TYPE OF USE
Specifically designed for powerful and recent cars fitted with high displacement engines, gasoline, Direct injection turbo Diesel and catalytic converters. Numerous car maker approvals make this product multipurpose especially recommended when the car is under warranty. Suitable for leaded or unleaded gasoline, Diesel fuels and LPG.
PERFORMANCE STANDARDS
API SL / CF
VW 502 00 / 505 00
BMW ‘Long Life’
PORSCHE
Mercedes Benz 229.3
* The OPEL/GM Diesel LL B-025 standard requires two main properties to the lubricant : high HTHS and very low volatility to drastically decrease oil consumption. Motul 8100 X-cess 5W-40 is especially recommended for OPEL 2.0 and 2.2 DTI engines (extended drain interval : computer on board).
* The ACEA B4 performance requires an outstanding detergent/dispersent power and a better viscosity increase resistance due to soot produced by Direct Injection Diesel engines (excep VW unit injector engines that require MOTUL Specific 505.01 5W-40)
* The MB 229.3 standard is more stringent than 229.1 in terms of ageing resistance (extended drain interval : computer on board ), detergent/dispersent power (ACEA B4) and requests fuel economy performance : 1.2% fuel economy improvement versus a 15W-40 reference.
RECOMMENDATION
Drain interval : refer to manufacturers’ recommendations and tune to your own use. MOTUL 8100 X-cess 5W-40 can be mixed with synthetic or mineral oils.
PROPERTIES
Viscosity grade SAE J 300 5W-40
Density at 15°C (59°F) ASTM D1298 0.853
Viscosity at 100°C (212°F) ASTM D445 14.6 mm²/s
Viscosity at 40°C (104°F) ASTM D445 92 mm²/s
Viscosity index ASTM D2270 165
Pour point ASTM D97 -33°C / -27°F
Flash point ASTM D92 230°C / 446°F
TBN ASTM D 2896 10.3 mg KOH/g
*Quantity One 1-liter bottle*
|,|"Shipping & Handling" "add(+$10)"|-||-|||-||MO815WX5BO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 8100 5w40 100% Synthetic Oil X-cess 5-Liter Bottle|,|MTL-368251|,|72.99|,|49.38|,||,||,|5.000 |,||,||,||,|Motul 8100 5w40 X-cess 5-Liter Bottle
Gasoline and Diesel engine oil
100% Synthetic
TYPE OF USE
Specifically designed for powerful and recent cars fitted with high displacement engines, gasoline, Direct injection turbo Diesel and catalytic converters. Numerous car maker approvals make this product multipurpose especially recommended when the car is under warranty. Suitable for leaded or unleaded gasoline, Diesel fuels and LPG.
PERFORMANCE STANDARDS
ACEA A3 / B3 / B4
APPROVALS
API SL / CF
VW 502 00 / 505 00
BMW ‘Long Life’ - PORSCHE
Mercedes Benz 229.3
* The OPEL/GM Diesel LL B-025 standard requires two main properties to the lubricant : high HTHS and very low volatility to drastically decrease oil consumption. Motul 8100 X-cess 5W-40 is especially recommended for OPEL 2.0 and 2.2 DTI engines (extended drain interval : computer on board).
* The ACEA B4 performance requires an outstanding detergent/dispersent power and a better viscosity increase resistance due to soot produced by Direct Injection Diesel engines (excep VW unit injector engines that require MOTUL Specific 505.01 5W-40)
* The MB 229.3 standard is more stringent than 229.1 in terms of ageing resistance (extended drain interval : computer on board ), detergent/dispersent power (ACEA B4) and requests fuel economy performance : 1.2% fuel economy improvement versus a 15W-40 reference.
RECOMMENDATION
Drain interval : refer to manufacturers’ recommendations and tune to your own use. MOTUL 8100 X-cess 5W-40 can be mixed with synthetic or mineral oils.
PROPERTIES
Viscosity grade SAE J 300 5W-40
Density at 15°C (59°F) ASTM D1298 0.853
Viscosity at 100°C (212°F) ASTM D445 14.6 mm²/s
Viscosity at 40°C (104°F) ASTM D445 92 mm²/s
Viscosity index ASTM D2270 165
Pour point ASTM D97 -33°C / -27°F
Flash point ASTM D92 230°C / 446°F
TBN ASTM D 2896 10.3 mg KOH/g
*Quantity One 5-liter bottle*
|,|||-||815WXB5LBO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 8100 5w40 100% Synthetic Oil X-Max 5-Liter Bottle|,|MOT102870|,|65.99|,|43.96|,||,||,|5.000 |,||,||,||,|Motul 8100 5w40 100% Synthetic Oil X-Max 5-Liter Bottle
PERFORMANCE
Motul lubricant allows extended and flexible drain intervals, low volatility, high efficiency, friction reduction, high resistance at high temperature met in modern engines. Anti-oxidation, Anti-wear, Anti-corrosion, Anti-foam properties. Formulation is perfect balance between outstanding lubrication (high HTHS > 3.5 mPa.s) and fuel economy linked to viscosity grade.
Environement friendly.
RECOMMENDATIONS
Drain interval : according to manufacturers’ recommendations to be tuned to your own use.
Can be mixed with synthetic and mineral oils.
PROPERTIES
Viscosity grade SAE J 300 5W-40
Density at 20°C (68°F) ASTM D1298 0.847
Viscosity at 100°C (212°F) ASTM D445 14.1 mm²/s
Viscosity at 40°C (104°F) ASTM D445 85.3 mm²/s
Viscosity index ASTM D2270 171
Pour point ASTM D97 -36°C / -32.8°F
Flash point ASTM D92 232°C / 449.6°F
TBN ASTM D2896 9.2 mg KOH/g
*Quantity One 5-liter bottle*
|,|||-||MO90LISLDIOI|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul 90PA - Limited Slip Differential Oil 2-Liter Bottle|,|MTL-318121|,|43.95|,|29.02|,||,||,|0.000 |,||,||,||,|Motul 90PA - Limited Slip Differential Oil 2-Liter Bottle
TYPE OF USE
Specially formulated for limited-slip differentials : Racing cars, 4WD, Passenger cars, forester and construction vehicles. All types of hypoïd differential with or without limited-slip system operating under shocks, heavy loads and low revolution speed or moderate load and high revolution speed. For BMW rear axles with limited-slip differential, use MOTUL HYPO SYNT LS.
PERFORMANCE STANDARDS
API GL4 and GL5 / MIL-L-2105D
Extreme pressure lubricant for an efficient anti wear protection.
Avoid noisy and grabbing limited slip differentials.
Very high lubricating properties to reduce friction.
Suitable for any type of seal
Anti-corrosion, Anti-foam.
RECOMMENDATIONS
Oil change: According to manufacturers’ requirements and adjust according to your own use.
PROPERTIES
Viscosity grade SAE J 306 90
Density at 15°C (59°F) ASTM D1298 0.898
Viscosity at 40°C (104°F) ASTM D445 140 mm²/s
Viscosity at 100°C (212°F) ASTM D445 14.5 mm²/s
Viscosity index ASTM D2270 102
Flash point ASTM D92 212°C / 414°F
Pour point ASTM D97 -24°C / -11°F
*Quantity One 2-liter bottle*
|,|"Shipping & Handling" "add(+$10)"|-||-|||-||MOMORAAD1BO|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Motul MoCool Radiator Additive 1/2-Liter Bottle|,|MTL-847405|,|36.99|,|19.02|,||,||,|0.000 |,||,||,||,|Motul MoCool Radiator Additive 1/2-Liter Bottle
Top engine cooling additive
Reduce engine temperature by 15°C (30°F)
Outstanding thermal exchange
Concentrated cooling fluid
TYPE OF USE
Any cooling system of bikes, cars, ATVs… when overheating is observed or in racing conditions to decrease engine operating temperature.
PERFORMANCE
Engines run cooler by 15°C (30°F) : Improves thermal exchange and engine cooling system efficiency.
Cooling system optimal protection against corrosion. Recommended for magnesium, aluminium alloys cases, cast iron, copper, brass and bronze systems. Water pump protection, avoid cavitation. Anti-corrosion properties that remain while high temperature and ageing. Low corrosion inhibitors consumption. Seals, rubber pipes, and plastics parts friendly.
RECOMMENDATIONS
MOTUL MoCool is a concentrated cooling fluid that may be mixed with distillated water for immediate use as a coolant.
Mix with water at 5% (20:1). Do not use pure product. Can be mixed with most coolants monoethyleneglycol based.
PROPERTIES
Color Visual Purple
Density at 20°C/68°F ASTM D1122 1.058
PH ASTM D1187 9.4
ATTENTION:
Some racing regulation do not allow anything else than pure water, if any doubt, check with race official organisation before using MoCool. Motul company cannot be involved in case of race disqualification while using MoCool inappropriately. MoCool does not provide any antifreeze protection.
*Quantity One 1/2-Liter Bottle*
|,|"Drop ship & Handling" "add(+$10)"|-||-|||-||MORBRADO10SY|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Motul RBF600 DOT4 100% Synthetic Brake Fluid 1/2L Bottle|,|MTL-8068HL|,|51.00|,|24.02|,||,||,|0.000 |,||,||,||,|Motul RBF600 DOT4 100% Synthetic Brake Fluid 1/2L Bottle
100% Synthetic Fluid – DOT 4
For hydraulic actuated brake and clutch systems
Very high boiling point : 312°C / 594°F
TYPE OF USE
All types of hydraulic actuated brake and clutch systems requiring a non-silicone synthetic fluid. Specially designed to resist to high temperature of racing actuated brake (steel or carbon) and clutch systems. Exceeds DOT 5.1 and DOT 3 standards also, except for viscosity at -40°C (-40°F).
PERFORMANCE
STANDARDS : FMVSS 116 DOT 4 / SAE J 1703 / ISO 4925 Extreme thermal resistance and stability : The very high boiling point (312°C / 594°F), superior to conventional DOT 5.1 non silicone base / DOT 5 silicone base fluids (260°C / 500°F mini) and DOT 4 (230°C / 446°F mini) enables an effective brake even under extreme conditions. Efficient when rainy : The very high wet boiling point (205°C / 401°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini) enables to keep an efficient brake system when rainy. Indeed, DOT 3, DOT 4 and DOT 5.1 brake fluids have the property to absorb humidity in the air, which reduces their boiling points and increases the risk to get to “vapor lock” phenomena.The wet boiling point is measured by humidifying the product with about 3.5 % of water.
RECOMMENDATIONS
Avoid mixing with polyglycols based brake fluid with lower performances. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent absorption of moisture. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.
PROPERTIES
100% synthetic fluid, polyglycol bases.
Color Amber
Dry boiling point 312 °C / 594 °F
Wet boiling point 205 °C / 401 °F
Viscosity at -40°C (-40°F) 1750 mm²/s
Viscosity at 100°C (212°F) 2.5 mm²/s
*Quantity One 1/2-liter bottle*
|,|||-||MORBD10SYBRF|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2006-2012|,|Motul RBF660 DOT4 100% Synthetic Racing Brake Fluid 1/2-Liter Bottle|,|MTL-847205|,|54.99|,|34.45|,||,||,|0.000 |,||,||,||,|Motul RBF660 "DOT4" 100% Synthetic Racing Brake Fluid 1/2-Liter Bottle
100% Synthetic Racing Fluid – DOT 4
Very high boiling point : 325°C / 617°F
For hydraulic actuated brake and clutch systems
TYPE OF USE
All types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist to extreme temperature generated by racing carbon and ceramic brakes allowing minimizing air entrance for brake cooling. Can be also used with conventional steel discs and clutch systems actuators. Widely exceeds DOT 3, DOT 4 and DOT 5.1 standards (except for DOT 5.1 viscosity at - 40°C).
PERFORMANCE STANDARDS
FMVSS 116 DOT 4 / SAE J1703 Extreme thermal resistance and stability : Very high boiling point (325°C / 617°F), superior to conventional DOT 5.1 non silicone base / DOT 5 silicone base fluids (260°C / 500°F mini) and DOT 4 (230°C / 446°F mini) Enables effective brake even in extreme conditions. Better aerodynamic performance by reducing air entrance for brake cooling on cars. Efficient when rainy : Very high wet boiling point (205°C / 401°F) superior to conventional DOT 5.1 non-silicone base fluid (180°C / 356°F mini) and DOT 4 (155°C / 311°F mini) enables to keep efficient braking while rainy. Brake fluids tend to absorb humidity from the air, which reduce boiling point and increase the risk to get to “vapor lock” phenomena. The wet boiling point is measured by humidifying the product with about 3.5 % of water.
RECOMMENDATIONS
Avoid mixing with polyglycols based brake fluid. Do not mix with silicone (DOT 5 silicone base) or mineral base fluids (LHM). Store brake fluid in its original container, tightly closed to prevent moisture absorption. Aggressive chemical product if contact with hands, paint or varnish. If skin contact, rinse thoroughly with water.
PROPERTIES
100% synthetic fluid, polyglycol bases.
Color Amber
Dry boiling point 325 °C / 617 °F
Wet boiling point 205 °C / 401 °F
Viscosity at -40 °C (-40 °F) 1698 mm²/s
Viscosity at 100 °C (212 °F) 2.59 mm²/s
*Quantity One 1/2-Liter Bottle*
|,|"Drop-shipping & Handling" "add(+$10)"|-||-|||-||MAZDA-MIATA-MOUNTING-BRACKETS-AND-HARDWARE-KIT-FOR-MIATA-HARDTOP-1990-2005|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1990-1997|,|Mounting Brackets and Hardware Kit for Mazda Miata Hardtop (NA/NB, 1990-2005)|,|50-67-7120|,|249.99|,|189.00|,||,||,||,||,||,||,|Mounting Brackets and Hardware Kit for Mazda Miata Hardtop (NA/NB, 1990-2005)
This is the complete set of mounting brackets and hardware for the NA/NB hardtop - racing or street.
Kit consists of 2 front, 2 side and 2 rear brackets and all mounting hardware.
|,|||-||MS-METAL-WHEEL-VALVES-CAPS|,|NEW|,|MS Logo Metal Wheel Valves Caps |,|ms-valve|,|29.95|,|16.99|,||,||,||,||,||,||,|MS Logo Metal Wheel Valves Caps
Easy to install, simple screw onto the air valve.
Fits for all car, motorcycle, etc.
Protect your air valve from leakage, dirt and other outer damage.
Specification:
Quantity: 1set/4 pcs
Item: Car Tire Valve Caps
Material: Metal
Color: Silver Black
|,|"Select Color" "Select Here" "Silver" "Black"|-||-|||-||386-290|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|MUS 4.3 Battery Test & Charge by CTEK|,|386-290|,|154.00|,|134.98|,||,||,||,||,||,||,|MUS 4.3 Battery Test & Charge by CTEK
Technical Data:
-Voltage: 14.4/14.7/15.8V
-Charging current Max: 4.3A
-Charger type: 8 step, fully automatic charging cycle 3 voltage test programs
-Battery type: 12V lead-acid and gel cell batteries
-Battery capacity: 1.2-110Ah, maintenance charging up to 160Ah
-Insulation: IP65 (splash and dust proof)
-Warranty: 5 Year Limited Manufacturer Warranty
|,|||-||MX-5-HEADER-25--WIRE-EXTENSION-FOR-FIRST-O2-SENSOR--ONLY-FOR-PPE-LONG-TUBE-HEADER-2006-2015-|,|20MAMIEXVEAL|,|MX-5 HEADER 25" WIRE EXTENSION for first O2 sensor, ONLY FOR PPE LONG TUBE HEADER 2006-2015 |,|61-1078-B|,|105.99|,|79.00|,||,||,||,||,||,||,|MX-5 HEADER 25" WIRE EXTENSION for first O2 sensor, ONLY FOR PPE LONG TUBE HEADER 2006-2015
This is an option for our LONG TUBE PPE HEADER CUSTOMERS ONLY! Allows relocation of your FIRST factory O2 sensor to the collector with just PLUG and PLAY extension. In addition to this extension for the first factory sensor, you will ALSO want our LONG extension (part 61-0098RD), so you can locate the second sensor downstream after the converter in the midpipe.
*** Product images may differ from actual product appearance ***
|,|||-||MXMICOAIRINB|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|MX-5 Miata Cold Air Induction by Cobalt - Sale!|,|CBT-904-377|,|109.99|,|99.95|,||,||,|0.000 |,||,||,||,|MX-5 Miata Cold Air Induction by Cobalt
The first cold air intake for the MX-5 Miata that doesn't require you to disassemble your bumper every time you need to clean or replace the filter.
Our Cobalt intake uses a precisely placed scoop, just behind the grille, to direct pressurized air into the engine. The incoming cool air is pushed through the intake to the engine, increasing HP and TQ output. The intake has been stragically placed so if you have to run a front license plate, the scoop is below and behind it so air flow will not be affected. The scoop was designed with a weep hole to allow any water to drain safely out.
For even more power output, replace the stock paper air filter with a high flow K&N cotton gauze filter. The K&N filter is a direct replacement and is backed by K&N's million mile warranty. The Coblat Cold Air Intake is Not CARB approved. The K&N panel filter is CARB approved.
For MX-5 Miata years 2006, 2007, 2008, and 2009
|,|"Drop-Shipping fee" "add(+$15)"|-||-|||-||CUSTOMDASHKIT|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MX-5 Miata Custom Dash Kit - SALE!|,|409-300|,|299.99|,|199.95|,||,||,|0.000 |,||,|asdg|,||,|If you are looking to give your Mazda MX-5 Miata's interior a great new look, nothing will hit the mark quite like a New Dash Kit.
Our Miata dash kits are very easy to install with peel and stick backing and your choice of many different materials including REAL WOOD, REAL CARBON FIBER and REAL BRUSHED ALUMINUM.
The company that produces our dash kits is top notch and the quality and fit is excellent. Our dash kits are all GENUINE WOOD and REAL COMPOSITE AND CARBON FIBER - NOT CARBON FIBER LOOK!
Total Thickness : With coating about 1/8 of an inch ( All Coatings Except RBA & RC )
Total Thickness : Without coating about 1/16 of an inch ( ONLY RBA & RC )
Please Note: If your current faceplate, also known as a radio bezel, is broken, you will need to replace it before being able to fit this kit. These kits are special order, custom cut and are not returnable.
Please allow 2-3 weeks for production of your dash kit.
|,|"Select Year" "Click Here to Select Your Miata Year" "90-93 Deluxe 10 Piece Kit" "94-98 16 Piece Kit Add (+$25)" "99-00 19 Piece Kit Add (+$30)" "01-05 W/O Door Panel 19 Piece Add(+$30)" "01-05 W/ Door Panels 21 Piece Add(+$50)" "06-08 Basic Kit, 20 Piece Add(+$50)" "06-08 Full Kit, 44 Piece Add(+$145)" "09-15 Full Kit, 56 piece Add(+$209)"|-||-|"Select Material for 1990-1993" "None" "Ash Burl-DA" "Birds Eye-AT" "Brushed Aluminum-MET" "Brushed Metal-CI" "Charcoal Cherry-AS" "Cherry Rosewood-BI" "Glossy Silver-AD" "Honey Burl-CS" "Lavishwood-CN" "Majestic Burl-AJ" "Real Carbon Fiber-CF" "Real Rosewood-R" "Real Walnut Burl-N50" "Real Silver Carbon Fiber-BE" "Red Burl-AV" "Satin Nickel-EN" "Villa Burl-AZ"|-||-|"Select Material for 1994-2014" "None" "Real Dark Mahogany-RWMW add(+$135)" "Real Japanese Cherry-RJCW add(+$135)" "Real Medium Burl-RMBW add(+$135)" "Real Platinum Burl-RPW add(+$135)" "Real Rosewood-RRW add(+$155)" "Real Walnut Burl-RWBW add(+$135)" "Real Carbon Fiber-RCF add(+$135)" "Real Blue Carbon Fiber-RBCF add(+$135)" "Real Light Blue Carbon Fiber-RLBCF add(+$135)" "Real Red Carbon Fiber-RRCF add(+$135)" "Real Silver Wire Carbon Fiber-RSWCF add(+$135)" "Real Yellow Carbon Fiber-RYCF add(+$135)" "African Zebra-SAZW add(+$135)" "Bird's Eye-SBEW add(+$135)" "Dark Zebra-SDZW add(+$135)" "Ebony Zebra-SEZW add(+$135)" "Honey Burl-SHBW add(+$135)" "Newport Burl-SNBW add(+$135)" "Titanium Burl-STBW add(+$135)" "Blue-SBlue add(+$135)" "Black-SBlack add(+$135)" "Orange-SOrange add(+$135)" "Real Chrome-RC add(+$135)" "Real Brushed Aluminum-RBA add(+$135)" "Red-SRed add(+$135)" "Titanium Burl-STBW add(+$135)" "Walnut Burl-SWBU add(+$135)" "White-SWhite add(+$135)" "Yellow-SYellow add(+$135)"|-||-|"Overhead Kit for Hard Top Options for 2006-2014" "Select Here" "No, thanks" "Yes, Overhead Kit for Hard Top Add(+$45)"|-||-|"Door Stills Kit Options for 2006-2014" "Select Here" "No, thanks" "Yes, Door Stills Kit Add(+$55)"|-||-|||-||KEEAUTOTOP|,|MAZDA-MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-2016|,|MX-5 MIATA KEE SOFT TOPS 1990-2005|,||,||,||,|KEE: MAZDA MX-5 MIATA SOFT TOPS 1990-2005|,||,||,||,||,||,|
|,|||-||KEE-AUTO-TOP-2006-2015|,|MAZDA-MX-5-MIATA-SOFT-TOP-CONVERTIBLE-TOP-2016|,|MX-5 MIATA KEE SOFT TOPS 2006-2015|,||,||,||,||,||,||,||,||,||,|
|,|||-||MXMIKEYCHRED|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|MX-5 Miata Key Chain Red|,|AGI-KC1542-MIA|,|21.95|,|16.95|,||,||,|0.000 |,||,||,||,|MX-5 Miata Key Chain Red
Genuine red leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||ACCESSORIES-TOPS--TONNEAUS---BOOTS-SOFT-TOP|,||,|MX-5 MIATA ORIGINAL STYLE SOFT TOPS 1990-2005|,||,||,||,|MX-5 MIATA ORIGINAL STYLE SOFT TOPS 1990-2005|,||,||,||,||,|http://lib.store.yahoo.net/lib/gomiata/robbinswarranty.htm
|,||,|||-||GAHHSOFTTOPS|,|SHOP-BY-TOP-MIATA-BRANDS|,|MX-5 MIATA PANORAMA STYLE TOPS 1990-2005 |,||,||,||,|PANORAMA STYLE TOPS 1990-2005|,|
|,||,||,||,|http://lib.store.yahoo.net/lib/gomiata/samedayshipping.jpg
http://www.gomiata.com/shippinginfo.html
|,| 
|,|||-||MX-5-MIATA-ROADSTERSPORT-HELMHOLTZ-MIDPIPE-WITH-CONVERTER-2006-2015|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5 Miata RoadsterSport HELMHOLTZ Midpipe with Converter 2006-2015|,|61-1738|,|1,099.99|,|848.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata RoadsterSport HELMHOLTZ Midpipe with Converter 2006-2015
A revolution in exhaust technology finally in a Miata application, this midpipe features an exclusive Helmholtz Resonator that massively reduces the standing wave 'boominess' inside the exhaust system BEFORE it gets to your muffler of choice! Cuts the 'booming' frequencies of 120-130hz by 48+db inside a top up Miata cabin which is a common source of complaints with aftermarket exhausts on the MX5. Bottom line: makes ANY exhaust system sound MUCH better!
Now with option for ultra flow FIVE inch converter. Standard 4 inch converter is great for 2.0 motors normally aspirated, the big 5 inch is for boosted cars and 2.5 conversions. Five inch fits manual transmission only.
We outfitted our Project 2012 PRHT Miata with a computer and sound spectrum analyzer and microphones and drove it under varying conditions and loads with mufflers and without any muffler to measure the frequencies coming out the midpipe. We then use that data and some special software to calculate the particulars of the Helmholtz chamber needed to precisely knock down the frequencies we do not want to hear while allowing the good throaty burble fun sounds to pass through. The result is all the fun, an almost exotic burble throaty result, without the drone! Note it is very dual personality because the effect of the Helmholtz is very frequency specific such that under decel it is mild and quiet, yet when you push hard toward redline it sounds exotic and racy. With the top down lots of fun throaty burble, but dramatically more tame when the top is up. In brief, FUN when you want it, and mild when just cruising.
Designed as a bolt-on replacement for the factory midpipe to carry higher flow all the way out any of our mufflers. Works with ANY of our muffler choices and customers report great results with everything from our RoadsterSport line to the original MazdaSpeed Mufflers. Simple Bolt on.
INCLUDES TWO O2 SENSOR bungs which gives YOU the option to later add our RoadsterSport headers and avoid engine codes (by using our O2 plug and play extension cords to relocate the factory O2 sensors to before and after the converter in this midpipe).
All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is larger diameter than stock for superior flow, particularly when matched to our headers. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved...which makes it legal in California only for off-road/race track use).
This midpipe will raise the final sound level because of the higher flow larger diameter tubing and because the Helmholtz is frequency specific in operation.
SORRY, NOT CARB APPROVED, NOT LEGAL ON CALIFORNIA HIGHWAYS. Sorry, we will not ship these to residents of California.
Read full installation hints and notes in our forum Installation Instruction Section! (Click "Forum" at the top of our site, go to installation instruction section, and look for NC/ND Midpipe install thread).
STR LEGAL under Class Rules Update 2012. Pursuant to SCCA 14.10.E: our cat fits entirely in the space that the factory cat occupied pursuant to SCCA 14.10.E....and Magnaflow certifies the core for use in any application andlt;6.2L and 6000 pounds. Core has 25,000 mile manufacturing defect warranty (no core warranty for boosted or track cars), and the rest (including housings) are stainless and include a lifetime warranty.
BRIAN'S APPLICATION NOTES: This is the ultimate Miata Midpipe and it's a serious revolution in Miata exhaust tech, the secret sauce to making a great sounding Miata exhaust system. I never seriously considered less than our RoadsterSport SuperQ as appropriate for the NC Generation Miata using any performance header upgrade but this midpipe makes ALL our choices MUCH more fun. The nature of this style of resonator is that the targeted frequencies are much LOWER volume and other frequencies not targeted are LOUDER than with our standard midpipe. This dual nature of the performance means when you are hard on the throttle it is LOUDER than with our standard midpipe, but on decel or running in the low rpm ranges where these cars tend to drone this setup is much quieter than our standard midpipe. You get all the racy fun, without the drone.
A little on the science, we targeted 120-130 hertz range which is where most folks report uncomfortable 'drone' or 'boominess' and got a total of 48 decibel max drop right at the 125 hertz level...which is a MASSIVE reduction. Nonetheless, looking at broader range we get an average 20 decibel drop from 115 to 138 hertz with reasonable 8 decibel drop in the ranges of 95 to 115 and 138 to 180 hertz. When used with our RoadsterSport Street header and SuperQ the result to my ears was so calm and collected that I think many would not realize the car was modified. When used with our RoadsterSport Max Power header and SuperQ the sound is certainly still louder than stock and almost exotic when on throttle, fun running through the gears and yet when you back off the throttle and just cruise down the freeway very controlled (no issues listening to music or your passenger, etc).
|,|"Select Converter Size" "Select Here" "4 Inch Standard" "5 Inch Ultra Flow add(+$30)"|-||-|"Shipping Cost" "add(+$89)"|-||-|||-||MX5-MIATA-ROADSTERSPORT-MAX-POWER-STAINLESS-STEEL-HEADER-2006-2013|,|20MAMIEXHECO|,|MX-5 Miata RoadsterSport MAX Power MX5 Miata Stainless Steel Header 2006-2015|,|61-1979|,|929.99|,|629.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata RoadsterSport MAX Power MX5 Miata Stainless Steel Header 2006-2015
Gorgeous! Nothing comes close to our famous RoadsterSport MAX Power Header! Look at those smooth curves! Sexy all T304 polished stainless steel is formed into equal length primaries for max power...with a lifetime warranty!
We have included a number of features into our MX5 Miata header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
We also put incredible effort into making the exit at the collector as smooth and perfect as we can get it because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible. Note we use the factory collector gasket....so our fit is as factory-like as possible.
Our collector outlet is 2.5 inches. Curiously, the factory outlet is ALSO 2.5 inches and then the factory exhaust chokes down after that point. For best performance customers should match our header with our midpipe and exhaust so they are running 2.5 inches of flow all the way...but our header will bolt in place of the factory header and connect perfectly to the factory midpipe. Note that we have no O2 sensor connection in our header....in part to keep flow as clean as we can get it but also because we could see no purpose in locating them in the header since doing so will throw a code because pulling the factory header includes removal of the first catalytic converter.
TWO choices on what to do with the O2 sensors with our header. Choice ONE is buy our midpipe which is designed to take both O2 sensors...and includes two O2 sensor connections...one before the midpipe's converter and one after the midpipe's converter to help avoid a code by simulating the factory installation before. Second choice is to have an O2 bung welded by your local muffler shop before and after the factory second converter in the factory midpipe to replicate the setup we are doing with our midpipe. Both choices require extension of the O2 wires and WE NOW HAVE THE OPTIONAL SHORT and LONG O2 EXTENSION CABLES ON THIS WEBSITE to make the install plug and play!
CARB NOTICE: Installing this header in the 2006 through 2013 MX5 Miata means removing the first catalytic converter which means this header will NEVER be a California street legal header, never be CARB approved (and therefore legal in California for off road use only).
BRIAN'S APPLICATION NOTES: This is THE header for peak power on the NC. Our normally aspirated customers making the most power, and our supercharger customers making the most power, are all using this header. The first converter is also a pretty good resonator so understand that installation of any header will raise the exhaust sound level about 20%. Therefore, we strongly recommend the RoadsterSport Q muffler with any header change because it was designed to handle the sound level of the header. YES, fits Manual and Auto trans, both LHD and RHD. Those with AUTOMATIC transmission should read our instructions on install first.
INSTRUCTIONS....see complete installation instructions in our forum in the Instructions Section. YES, fits both manual and automatic.
PICTURE OF FACTORY HEADER BELOW, Note the pinch point circled in red, which chokes the power this motor can otherwise make.
Compare the short and uneven length factory header primaries above to the equal LENGTH, LONG and SMOOTHLY curved primaries of the RoadsterSport MAX Power Header.
|,|"Select Size" "Select Here" "1.8 Inch" "2.0 Inch (61-3215) add(+$100)"|-||-|"Do you want Oxygen Sensor Extension Wires" "No" "One O2 Wire Extension add(+$50)" "Two O2 Wire Extension add(+$100)"|-||-|"Shipping Cost" "add(+$85)"|-||-|||-||MX5-MIATA-ROADSTERSPORT-STREET-HEADER--LIMITED-EDITION-CERAMIC-COATED-2006-2013|,|20MAMIEXHECO|,|MX-5 Miata RoadsterSport MAX Power XL 2.0 Inch NC Stainless Steel Header - Ceramic Coated 2006-2015|,|61-3307|,|1,089.99|,|929.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata RoadsterSport MAX Power XL 2.0 Inch NC Stainless Steel Header - Ceramic Coated 2006-2015
Our famous RoadsterSport MAX Power Header, now with MONSTER 2 inch primaries, AND BRIGHT SILVER ceramic coating!
Beatifully TIG welded, polished stainless steel finish. Comes with a fresh donut gasket for the connection to the midpipe included. Compatible with our standard engine mounts and also our engine drop brackets that lower the motor a half inch.
This is for folks seeking over 250 horsepower at the wheels, either by supercharger or very high compression naturally aspirated built motor. Not a new concept - 10 years ago when we built the NC Light, that car made made the most power (270whp naturally aspirated) on 2 inch primaries. But for many years nobody else was building motors that extreme. Finally now we've reached a point where there are enough folks out there who are building cars that can use it that it makes sense for us to offer this as a regular production part.
Look at those smooth curves! Notice you don't see 6 welded sections for each primary like so many lesser headers that are made from cut pieces of standard radius pipe and straights. Instead, where possible ultra SMOOTH all mandrel bent tube is used here to keep flow as clean as possible. Sexy all T304 polished stainless steel is formed into massive 2 inch primaries for max power.
We put incredible effort into making the exit at the collector as smooth and perfect as we can get it because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible. Note we use the factory collector gasket....so our fit is as factory-like as possible.
Our collector outlet is 2.5 inches. For best high rpm performance customers should match our header with our midpipe and exhaust so they are running 2.5 inches of flow all the way... but our header will bolt in place of the factory header and connect perfectly to the factory midpipe.
GASKETS:
Header comes with new "donut" gasket for the header to midpipe connection. Does NOT come with a gasket for header to engine connection - you reuse your factory gasket there - that gasket is a metal gasket usually good for the lifetime of the car unless you damage yours.
OXYGEN SENSORS:
Several options on what to do with the O2 sensors with our header. Read below for options A, B and C. Optional oxygen sensor wire extension cables are available as an add-on option with this header. Adding ONE wire extension gets you one long wire extension to move the secondary oxygen sensor to the midpipe as described in option B below. Adding TWO wire extensions gets you one long and one short wire extension for moving both primary and secondary oxygen sensors down to the midpipe as described in option A below.
A) Buy our midpipe and our two wiring extensions available here for simple plug and play install. Our midpipes are designed to take both O2 sensors, and includes two O2 sensor connections for that - one before the midpipe's converter and one after the midpipe's converter to help avoid a code. Buy BOTH of our extensions for that option.
B) Second choice and most common choice is first sensor in the header and second sensor in our midpipe after the converter, which will also avoid a code. For install in the midpipe of both sensors you need both O2 extension cords, but if you put the first sensor in the header you only need an extension for the second sensor. The first sensor will reach header connection but you may have to follow the wires back to the harness and use a razor blade to clear some sheath which has them gathered shorter than they actually are.
C) Third choice is to put BOTH sensors in the header, which will cause a code unless your tuner turns off the code caused by having the second sensor in the header. You don't need any wiring extensions for that option (sensors will reach header connection but you may have to follow their wires back to the harness and use a razor blade to clear some sheath which has them gathered shorter than they actually are).
OXYGEN SENSOR BUNGS:
There are TWO oxygen sensor bungs provided by the outlet flange on this header. The header ships with plugs loosely pre-installed in both bungs. Remove a plug to install an o2 sensor where you need it according to the sensor configuration you're running on your particular car (various options A/B/C described above), and where you are not installing a sensor be sure to TIGHTEN the plug there before install.
NOTES ON CERAMIC COATING. Frankly, it is usually only the mild steel headers that are ceramic coated and I had always suspected that the main reason was to slow down the inevitable rust that a mild steel header will suffer over time. Since this header is already made in ALL STAINLESS STEEL, it does not need ceramic coating for rust prevention. That left the pure question of whether or not we could really find additional torque with the ceramic coating to justify the costs. After lots of testing the answer turned out to be YES, our BRIGHT ceramic coating was consistently ~3% stronger across all points on the curve.
CARB NOTICE: Installing this header in the 2006 through 2015 MX5 Miata means removing the first catalytic converter which means this header will NEVER be a California street legal header, never be CARB approved (and therefore legal in California for off road use only). Note that there are states in addition to California that now follow the California model and require CARB compliance, please check the rules of your state before ordering, in some states this setup is legal only for race cars and may never be used on public highway. Sorry, we will not ship these to residents of California.
The first converter is also a pretty good resonator so understand that installation of any header will raise the exhaust sound level a good 20%. Therefore, we strongly recommend the RoadsterSport Q muffler with any header change because it was designed to handle the sound level of the header, and our RoadsterSport Helmholtz midpipe tunes the final sound result for drone free fun.fun.
|,|"Shipping Cost" "add(+$85)"|-||-|||-||MX-5-MIATA-ROADSTERSPORT-STREET-HEADER-2006-2013|,|20MAMIEXHECO|,|MX-5 Miata RoadsterSport STREET Header 2006-2015|,|61-1155|,|849.00|,|798.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata RoadsterSport STREET Header 2006-2015
The most torque you can buy in a catted MX5 Miata header! We are now shipping the new All Stainless Steel MX5 ROADSTERSPORT STREET HEADER! See our forum MX5 PRHT Project and Dyno thread for many more details on development history, pictures of prototypes, and dyno work. A great choice for street customers looking for a Plug And Play MX5 Miata header with converter that is 49 state legal!
MX5 Miata Street Header features:
-Longer, equal length runners
-High-flow 5" round, 200cpi Ceramic Core Catalytic Converter
-49 state legal cat (EPA and OBD2 compliant, but NOT CARB APPROVED for California, the Carsound 99659HM core is an EPA certified converter covering up-to 6.2L/6375 lbs so it easily handles the flow of our performance header while still delivering clean tailpipe emissions)
-Bolt-in design for MANUAL TRANSMISSION (see our forum header install thread for details of installation on automatic transmission).
-Bolts to RoadsterSport MX5 Midpipe...or stock MX5 midpipe. Also saves weight, factory header assembly is 15.2 pounds and this RoadsterSport MX5 Street Header with converter is just 11 pounds! Converter has two year manufacturing defect warranty (normally aspirated cars only, NOT recommended for supercharged cars), the rest is all stainless steel and has a LIFETIME warranty, even the flanges!
Currently for Manual Transmission only (a professional can install on the automatic but it requires re-engineering the cooling line layout and modification to the bell housing). Also, sorry to our Australian customers but this fits Left Hand Drive only.
We have included a number of extra features into our MX5 Miata Street Header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
Our collector outlet is 2.5 inches. Curiously, the factory outlet is ALSO 2.5 inches and then the factory exhaust chokes down after that point. For best HIGH RPM performance customers should match our header with our midpipe and exhaust so they are running 2.5 inches of flow all the way...but our header will bolt in place of the factory header and connect perfectly to the factory midpipe for better performance from idle to redline.
PICTURE OF FACTORY MX5 HEADER BELOW, Note the pinch point the factory header suffers, circled in red below, which chokes the power this Miata 2.0 motor can otherwise make. Our Roadstersport Street MX5 Header eliminates that pinch point, extends the primary length to max torque gains, while retaining a high efficiency converter.
|,|"Shipping Cost" "add(+$85)"|-||-|||-||ROSOTO|,|SHOP-BY-TOP-MIATA-BRANDS|,|MX-5 MIATA STREAMLINE STYLE TOPS 1990-2005|,||,||,||,|SIERRA: MAZDA MX-5 MIATA SOFT TOPS 1990-2005|,||,||,||,||,|
|,|
|,|||-||SIERRATOPS|,||,|MX-5 MIATA STREAMLINE STYLE TOPS 2006-2015|,||,||,||,||,||,||,||,||,||,|
|,|||-||MXMITRDOGRA1|,|19MAMIENPESU|,|MX-5 Miata Track Dog Racing - 1990-1993 Intercooler Kit for the JRSC M45 Supercharger|,|TDR-90M45|,|1,200.00|,|1,095.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - 1990-1993 Intercooler Kit for the JRSC M45 Supercharger
Track Dog Racing intercooler system for the JR M45 Supercharger. Includes FMIC, pipes mounting hardware and detailed instructions.
The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our dual hood struts at 25% Off the retail price at the time of purchase!
*Please Note: The Koyo radiators on the 90-97 models are 3/4" taller than the stock radiator causing clearance issues with the intake pipe. There are no clearance issues with the stock radiator and PWR radiator.
|,|"***The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our TDR Dual Hood Struts at 25% off the retail price at the time of purchase!***" "No" "Yes add(+$56.25)"|-||-|||-||MXMITRDOGRA16|,|19MAMIENPESU|,|MX-5 Miata Track Dog Racing - 1994-1997 Intercooler Kit for the MOSS MP62 Supercharger|,|TDR-94M62|,|1,450.00|,|1,190.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - 1994-1997 Intercooler Kit for the MOSS MP62 Supercharger
Track Dog Racing intercooler system for your 1994-1997 1.8 Miata with the MOSS MP62 Supercharger. Includes FMIC, pipes mounting hardware and detailed instructions.
The Track Dog Racing Air-to-Air Intercooler System is engineered to be the one of most efficient intercooler on the market and only uses components of the highest quality. This intercooler has been designed and tested specifically for the Mazda Miata using the MOSS MP62 Supercharger. Our intercooler systems are perfect for both low-boost and high-boost applications such as track events and heavy-duty street use. The TDR I/C requires removal of the stock hood prop. We recommend you add our optional dual hood lift kit at the time of purchase.
Please Note: Most aftermarket aluminum radiators on the 90-97 models are 3/4" taller than the stock radiator causing clearance issues with the intake pipe. There are no clearance issues with the stock radiator and TDR radiator.
FEATURES:
Highly efficient "Over the top" design to maximize boost
Beautiful seamless stainless steel pipes
Uses only the highest quality materials including stainless steel and aluminum construction
Custom radiator divertor panels to provide the most efficient cooling
Full instructions with photos for easy installation
Free support from Track Dog Racing
All hardware included
|,|"Add Hood Lift Kit?" "Yes add(+$99)"|-||-|||-||MXMITRDOGRA12|,|19MAMIENPESU|,|MX-5 Miata Track Dog Racing - 1994-1997 Intercooler Kit for the MP62 Supercharger|,|TDR-94MOSS-MP62|,|1,200.00|,|1,095.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - 1994-1997 Intercooler Kit for the MP62 Supercharger
Track Dog Racing intercooler system for the Jackson Racing M45 Supercharger. Includes FMIC, pipes mounting hardware and detailed instructions.
The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our dual hood struts at 25% Off the retail price at the time of purchase!
*Please Note: The Koyo radiators on the 90-97 models are 3/4" taller than the stock radiator causing clearance issues with the intake pipe. There are no clearance issues with the stock radiator and PWR radiator.
|,|"***The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our TDR Dual Hood Struts at 25% off the retail price at the time of purchase!***" "No" "Yes add(+$56.25)"|-||-|||-||MXMITRDOGRA15|,|19MAMISUANDU|,|MX-5 Miata Track Dog Racing - 1999-2005 Intercooler Kit for the BRP MP62 Supercharger|,|TDR-99MP62B|,|1,200.00|,|1,095.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - 1999-2004 Intercooler Kit for the BRP MP62 Supercharger
Track Dog Racing intercooler system for the Jackson Racing M45 Supercharger. Includes FMIC, pipes mounting hardware and detailed instructions.
The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our dual hood struts at 25% Off the retail price at the time of purchase!
*Please Note: The Koyo radiators on the 90-97 models are 3/4" taller than the stock radiator causing clearance issues with the intake pipe. There are no clearance issues with the stock radiator and PWR radiator.
|,|"***The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our TDR Dual Hood Struts at 25% off the retail price at the time of purchase!***" "No" "Yes add(+$56.25)"|-||-|||-||MXMITRDOGRA13|,|19MAMISUANDU|,|MX-5 Miata Track Dog Racing - 1999-2005 Intercooler Kit for the JRSC M45 Supercharger|,|TDR-99M45|,|1,200.00|,|1,095.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - 1999-2004 Intercooler Kit for the JRSC M45 Supercharger
Track Dog Racing intercooler system for the Jackson Racing M45 Supercharger. Includes FMIC, pipes mounting hardware and detailed instructions.
The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our dual hood struts at 25% Off the retail price at the time of purchase!
*Please Note: The Koyo radiators on the 90-97 models are 3/4" taller than the stock radiator causing clearance issues with the intake pipe. There are no clearance issues with the stock radiator and PWR radiator.
|,|"***The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our TDR Dual Hood Struts at 25% off the retail price at the time of purchase!***" "No" "Yes add(+$56.25)"|-||-|||-||MXMITRDOGRA14|,|19MAMISUANDU|,|MX-5 Miata Track Dog Racing - 1999-2005 Intercooler Kit for the MP62 Supercharger|,|TDR-99MOSS-MP62|,|1,200.00|,|1,095.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - 1999-2004 Intercooler Kit for the MP62 Supercharger
Track Dog Racing intercooler system for the Jackson Racing M45 Supercharger. Includes FMIC, pipes mounting hardware and detailed instructions.
The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our dual hood struts at 25% Off the retail price at the time of purchase!
*Please Note: The Koyo radiators on the 90-97 models are 3/4" taller than the stock radiator causing clearance issues with the intake pipe. There are no clearance issues with the stock radiator and PWR radiator.
|,|"***The TDR I/C requires removal of the stock hood prop. As a Bonus we will offer our TDR Dual Hood Struts at 25% off the retail price at the time of purchase!***" "No" "Yes add(+$56.25)"|-||-|||-||MXMITRDOGRAP1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5 Miata Track Dog Racing - Black Dual Hood Lift Kit 1990-2015|,|TDR-HD-LFT-NAB|,|129.99|,|114.02|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Black Dual Hood Lift Kit 1990-2015
Installing one of our intercooler kits? You'll need these lifts to hold your Miata's hood open. Even if you don't have an intercooler these beautiful black plated dual hood lifts give your delicate aluminum hood the benefit of two hydraulic lifts.
|,|"Select Years" "Select Year" "1990-2005" "2006-2015 add(+$15)"|-||-|||-||TRDOGRACUFLG|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MX-5 Miata Track Dog Racing - Custom Flat Gauge Panel 1990-1997|,|TDR-PANEL-M1|,|47.00|,|37.98|,||,||,|0.000 |,||,||,||,|MX-5 Track Dog Racing - Custom Flat Gauge Panel 1990-1997
This plastic panel holds three gauges and mounts securely into the factory DIN slot.
|,|||-||MXMITRDOGRAP|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|MX-5 Miata Track Dog Racing - Pulley Puller Kit|,|TDR-PULR|,|35.00|,|19.35|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Pulley Puller Kit
To remove the supercharger pulleys you need a pulley puller. The TDR unit is a simple 2-clamp 3" pulley puller that requires no additional tools for removing the SC pulley.
|,|||-||MXMITRDOGRAR|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|MX-5 Miata Track Dog Racing - Radiator Cowl Cover 1990-1997|,|TDR-RCC|,|108.00|,|82.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Radiator Cowl Cover
Increase your cooling efficiency and dress up your Miata. The TDR radiator cowl covers the area between the bumper and the radiator forces incoming air through your radiator instead of letting it escape through the top. All aluminum construction with a black crinkle powder-coated finish and accented with an engraved Track Dog Racing badge. Installation hardware and instruction are included. For 1990 - 1997 Miatas only. Requires moving the air bag sensor wiring on earlier models.
|,|"Drop Shipping fee" "add(+$10)"|-||-|||-||MXMITRDOGRAS2|,|19MAMIDRCLFL|,|MX-5 Miata Track Dog Racing - Stainless Braided Clutch Line 1990-2005|,|TDR-CLUT-LIN1|,|45.00|,|39.99|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Stainless Braided Clutch Line
Our high performance stainless braided clutch line offers superior performance, longer life and better pedal feel since OEM rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tubewith vinyl sleeve for abrasion protection.
|,|||-||TDR-CLUTCH-LINE-NC|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|MX-5 Miata Track Dog Racing - Stainless Braided Clutch Line 2006-2014|,|TDR-CLUT-LIN2|,|45.00|,|39.99|,||,||,|0.000 |,||,||,||,|MX-5 Miata Track Dog Racing - Stainless Braided Clutch Line 2006-2014
Our high performance stainless braided clutch line offers superior performance, longer life and better pedal feel since OEM rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tubewith vinyl sleeve for abrasion protection.
|,|||-||TRDOGRA20MIA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5 Miata Track Dog Racing Air Splitter 2001-2005|,|TDR-01M111|,|149.00|,|129.00|,||,||,|5.000 |,||,||,||,|MX-5 Miata Track Dog Racing Air Splitter 2001-2005
Extends 1" around the perimeter of the stock bumper. Mounts to factory bumper; includes all mounting hardware.
At speed the Track Dog Racing Air Splitter increases the down force on the front of your Miata lowering the center of gravity and giving the front tires more grip. As oncoming air hits the front of your Miata it creates a high pressure zone. The air splitter sends the majority of this high pressure air over and around your Miata to give it down force. The air that does go under your Miata has to increase in velocity which creates a low pressure area to further increase the down force. The air splitter also defends your Miata’s front end against scraping and dings. Made from 1/16” think, high-impact ABS plastic and built to take a surprising amount of abuse. Splitter extends 1.75” at the out edges and 1” below the radiator opening. Includes all mounting hardware. Recommend painting the splitter for best appearance. For use with the factory front lower spoiler only.
|,|||-||TRDOGRA19MIE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5 Miata Track Dog Racing EXTREME Air Splitter 1999-2000|,|TDR-99M122|,|149.00|,|129.00|,||,||,|5.000 |,||,||,||,|MX-5 Miata Track Dog Racing EXTREME Air Splitter 1999-2000
The Extreme air splitter extends 1.75" at the outer edges and 1" below the radiator opening. Includes all mounting hardware; requires factory air dam.
At speed the Track Dog Racing Air Splitter increases the down force on the front of your Miata lowering the center of gravity and giving the front tires more grip. As oncoming air hits the front of your Miata it creates a high pressure zone. The air splitter sends the majority of this high pressure air over and around your Miata to give it down force. The air that does go under your Miata has to increase in velocity which creates a low pressure area to further increase the down force. The air splitter also defends your Miata’s front end against scraping and dings. Made from 1/16” think, high-impact ABS plastic and built to take a surprising amount of abuse. Splitter extends 1.75” at the out edges and 1” below the radiator opening. Includes all mounting hardware. Recommend painting the splitter for best appearance. For use with the factory front lower spoiler only.
|,|||-||TRDOGRA20MAM|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5 Miata Track Dog Racing MAZDASPEED Air Splitter 2004-2005|,|TDR-04M122|,|169.00|,|139.00|,||,||,|5.000 |,||,||,||,|MX-5 Miata Track Dog Racing MAZDASPEED Air Splitter 2004-2005
Extends extends 1.75" at the outer edges and 1" below the radiator opening. Includes all mounting hardware.
At speed the Track Dog Racing Air Splitter increases the down force on the front of your Miata lowering the center of gravity and giving the front tires more grip. As oncoming air hits the front of your Miata it creates a high pressure zone. The air splitter sends the majority of this high pressure air over and around your Miata to give it down force. The air that does go under your Miata has to increase in velocity which creates a low pressure area to further increase the down force. The air splitter also defends your Miata’s front end against scraping and dings. Made from 1/16” think, high-impact ABS plastic and built to take a surprising amount of abuse. Splitter extends 1.75” at the out edges and 1” below the radiator opening. Includes all mounting hardware. Recommend painting the splitter for best appearance. For use with the factory front lower spoiler only.
|,|||-||TRDOGRA19MIA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|MX-5 Miata Track Dog Racing Miata Air Splitter 1999-2000|,|TDR-99M121|,|149.00|,|129.00|,||,||,|5.000 |,||,||,||,|MX-5 Miata Track Dog Racing Miata Air Splitter 1999-2000
Extends 1" beyond the air dam. Includes all mounting hardware; requires factory air dam.
At speed the Track Dog Racing Air Splitter increases the down force on the front of your Mazda Miata lowering the center of gravity and giving the front tires more grip. As oncoming air hits the front of your Miata it creates a high pressure zone. The air splitter sends the majority of this high pressure air over and around your Miata to give it down force. The air that does go under your Miata has to increase in velocity which creates a low pressure area to further increase the down force. The air splitter also defends your Mazda Miata’s front end against scraping and dings. Made from 1/16” think, high-impact ABS plastic and built to take a surprising amount of abuse. Splitter extends 1.75” at the out edges and 1” below the radiator opening. Includes all mounting hardware. Recommend painting the splitter for best appearance. For use with the factory front lower spoiler only.
|,|||-||WINDOWCLIPS|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MX-5 Miata Window Clips|,|MC-WC|,|49.99|,|39.95|,||,||,|0.000 |,||,||,||,|MX-5 Miata Window Clips
These window clips were designed to bolt into your Miata in existing holes to allow you to use your stock door glass even if you have gutted the window hardware to accommodate nascar style door bars in your car.
Made from .125 aluminum, they are extremely lightweight and bolt into existing holes in the upper portion of the door. These pieces are water cut for precision and consistency and don't look like your 8th grader made them in shop class.
The existing holes in the door are slotted which give you the ability to adjust the clip vertically to get the perfect fit for your door glass. The tops of the clips are rounded, so they also have the ability to adjust their angle forward and back to achieve the very best fit where the glass rests on the aluminum.
Once installed, they are out of sight and allow you to simply set the glass back into the rubber channel from above the door. Once the glass is aligned in the horizontal rubber channel and vertical rubber channel at the front of the window support, the door glass rests on top of the aluminum and acts as though the window was in the fully rolled up position.
This allows for you to keep the inclement weather out of your race car when transporting it or storing it overnight at the racetrack. Once the upper Black plastic door trim/pad is installed, you can not see the clips at all.
Price is for 4 black anodized window clips.
|,|||-||WINETMEST|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|MX-5 Miata Window Net - Mesh Style|,|MC-WNM|,|59.99|,|49.00|,||,||,|0.000 |,||,||,||,|MX-5 Miata Window Net - Mesh Style
17 x 21.5 mesh style window net.
|,|||-||MXSCSACHVAKE1|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|MX-5 Script Satin Chrome Valet Key Fob|,|KEY-KCV-MIA|,|19.99|,|16.95|,||,||,|0.000 |,||,||,||,|MX-5 Script Satin Chrome Valet Key Fob
KEY CHAINS: Striking in appearance and crafted from superior materials, these key chains are unique, durable and backed by a lifetime warranty against flaws in materials & workmanship. Packaged in an attractive gift box.
|,|||-||MXSCSACHVAKE|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|MX-5 Script Satin Chrome Valet Key Fob|,|KEY-KCC-MIA|,|19.99|,|16.95|,||,||,|0.000 |,||,||,||,|MX-5 Script Satin Chrome Valet Key Fob
KEY CHAINS: Striking in appearance and crafted from superior materials, these key chains are unique, durable and backed by a lifetime warranty against flaws in materials & workmanship. Packaged in an attractive gift box.
|,|||-||MX-5-MIATA-PARTS-2006-2012|,||,|MX5 MIATA PARTS 06-15|,||,||,||,|MAZDA MX-5 MIATA PARTS AND ACCESSORIES 2006-2015|,||,||,||,||,||,||,|||-||MAZDA-MX-5-MIATA-PARTS-2016|,||,|MX5 MIATA PARTS 2016+|,||,||,||,|MAZDA MX-5 MIATA PARTS AND ACCESSORIES 2016+|,||,||,||,||,||,||,|||-||MX-5-MIATA-PARTS-1990-1997|,||,|MX5 MIATA PARTS 90-97|,||,||,||,|MAZDA MX-5 MIATA PARTS AND ACCESSORIES 1990-1997|,||,||,||,||,||,||,|||-||MX-5-MIATA-PARTS-1999-2005|,||,|MX5 MIATA PARTS 99-05|,||,||,||,|MAZDA MX-5 MIATA PARTS AND ACCESSORIES 1999-2005|,||,||,||,||,||,||,|||-||386-296|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|MXS 5.0 Battery Charger by CTEK|,|386-296|,|119.05|,|97.98|,||,||,||,||,||,||,|MXS 5.0 Battery Charger by CTEK
Features & Technical Info:
-Input 110-120VAC, 50-60Hz, 0.6A max
-Output 14.4V/14.7V/15.8V, 4.3A max
-Start voltage 2.0V
-Back current drain* Corresponding to less than 1Ah/month
-Ambient temperature -20C to +50C
-Battery types: All types of lead-acid batteries, 12V, WET, MF, Ca/Ca, AGM, GEL
-Battery capacity 1.2-160Ah
-Insulation class IP65
-Built in charge voltage temperature compensation according to ambient temperature
-Fully automatic 'connect and forget' 8 step 12V charging
-Patented float/pulse maintenance for batteries up to 160Ah
-Warranty 5 years
|,|||-||NARDIPERSONAL|,|SHOP-BY-TOP-MIATA-BRANDS|,|Nardi - Personal|,||,||,||,||,||,||,||,||,||,||,|||-||NASTWHSPADKI|,|NARDIPERSONAL|,|Nardi - Personal Steering Wheel Spacer Adapter Kit - MOMO to Nardi - Black Aluminum|,|NARDI-4300-00-0007|,|69.69|,|59.99|,||,||,|0.000 |,||,||,||,|Nardi-Personal Steering Wheel Spacer Adapter Kit - MOMO to Nardi - Aluminum - Part # 4300.00.0007
• Brand new in factory box with all hardware.
• Made from the finest high grade aircraft quality aluminum.
• Installs between any MOMO, ISOTTA, Sparco, or NRG hub adapter & Nardi or Personal steering wheel.
• Fits MOMO, ISOTTA, Sparco, NRG and most other 6 hole hub adapters with a 2.75 inch inch bolt pattern.
• Fits Nardi, Personal and most other 6 hole steering wheels with a 2.875 inch bolt pattern.
• Dimensions:
Outside Diameter: 85 mm (3.35 inches)
Inside Diameter: 55 mm (2.17 inches)
Outside Thickness: 11 mm (0.43 inches)
Inside Thickness: 14 mm (0.55 inches)
Fits Fits most 6 hole hub adapters (2.75 inch bolt pattern) and most 6 hole steering wheels (2.875 inch bolt pattern).
Contact us to verify fit.
Quantity 1 Spacer Adapter Kit
Color - Finish Black Aluminum
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||6051-36-6901|,|20MAMIINSTWH|,|Nardi Classic - 365mm (14.37 inches) - Black Leather with Black Stitching - Satin Spokes|,|6051-36-6901|,|612.02|,|489.02|,||,||,||,||,||,||,|Nardi Classic - 365mm (14.37 inches) - Black Leather with Black Stitching - Satin Spokes
Nardi S.p.A. with its masterpieces worldwide appreciated coniugates the past to the future. And from the past comes the love for details and the particular ability which used to be applied in the manufacture of every steering wheel. Each steering wheel, today, is handmade before and after polishing and painting phases. To the present belongs the sophisticated machines and computerized control instruments. From the past comes the knowledge and the experience to choose and treat "ancient" materials, such as natural leathers, woods, and precious briarwoods. From the present come some components of the manufacturing process and the most sophisticated technique of employment.
Features:
- Wheel Diameter in mm: 360mm
- Wheel Diameter in Inches: 14.17"
Fitment:
Universal
Notes:
Pictures used for marketing purposes only, actual product may vary
|,|||-||NAEMHABREBOB|,|20MAMIINBO|,|Nardi Emergency Hand Brake (E-Brake) Boot - Black and Red Leather|,|NARDI-3900-11-0000|,|95.00|,|76.00|,||,||,|0.000 |,||,||,||,|Nardi Emergency Hand Brake (E-Brake) Boot - Black and Red Leather - Part # 3900.11.0000
• Brand new in factory box.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most vehicles. Contact us to verify fit.
Quantity 1 Emergency Hand Brake (E-Brake) Boot
Color - Finish Black and Red Leather
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASHKNAMREDP|,|20MAMIINKN|,|Nardi Gear Shift (Shifter) Knob - Ambition Reverse - Aluminum / Red Perforated Leather|,|NARDI-3547-00-1005|,|176.49|,|109.02|,||,||,|0.000 |,||,||,||,|Nardi Gear Shift (Shifter) Knob - Ambition Reverse - Aluminum / Red Perforated Leather - Part # 3547.00.1005
-Brand new in factory box. Installs with bushings and set screws included with the knob. All the instructions and hardware are included with this product.
-Nardi is widely known for its established reputation as a steering wheel & Shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
|,|||-||NAHUBAD|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Nardi Mazda Miata Steering Wheel Hub Adapter Kit 1990-2015|,|4325-00-2707|,|159.95|,|139.02|,||,||,|0.000 |,||,|csef|,||,|Nardi - Personal Steering Wheel Hub Adapter Kit - Mazda Miata (89>) - Part # 4325.00.2707
• Brand new in factory box with all hardware.
• Made in Italy from the finest high grade aircraft quality aluminum.
• This replaces your factory steering wheel, then you can install any 6 hole aftermarket steering wheel (with a 2.875 inch bolt pattern) in your vehicle.
• Fits Nardi, Personal and most other 6 hole steering wheels with a 2.875 inch bolt pattern.
Note: MOMO, ISOTTA, Sparco, and NRG Steering Wheels will work with this hub adapter with the use of an NRG spacer adapter (available in Black or Silver) sold separately
|,|"Select Option" "Select Here" "1990-1997 without airbag (4370.95.2707)" "1990-1997 with Airbag (4350.98.2705) add(+$25)" "1999-2015 with Airbag (4350.98.2707) add(+$25)"|-||-|||-||NASHBOBLLE|,|20MAMIINBO|,|Nardi Shift Boot - Black Leather|,|NARDI-3600-01-0000|,|125.00|,|103.95|,||,||,|0.000 |,||,||,||,|Nardi Shift Boot - Black Leather - Part # 3600.01.0000
• Brand new in factory box.
• Made in Italy.
• Universal fit. Fits most shift knobs and vehicles.
• This boot is about 216mm (8.50 inches) Tall.
Fits Fits most vehicles and most shift knobs. Contact us to verify fit.
Quantity 1 Leather Shifter Boot
Color - Finish Black Leather - Silver Thread
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASHKNAMINSI|,|20MAMIINKN|,|Nardi Shift Knob - Ambition - Inox Silver Leather - Aluminum Finish|,|NARDI-3547-00-0005|,|176.49|,|155.02|,||,||,|0.000 |,||,||,||,|Nardi Shift Knob - Ambition - Inox Silver Leather - Aluminum Finish - Part # 3547.00.0005
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Inox Silver Leather - Aluminum Finish
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASHKNCLAL|,|20MAMIINKN|,|Nardi Shift Knob - Classico - Aluminum|,|NARDI-3534-00-0000|,|193.79|,|158.95|,||,||,|0.000 |,||,||,||,|Nardi Shift Knob - Classico - Aluminum - Part # 3534.00.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Aluminum
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASHKNEVBLLE|,|20MAMIINKN|,|Nardi Shift Knob - Evolution - Black Leather|,|NARDI-3202-00-0100|,|145.00|,|129.95|,||,||,|0.000 |,||,||,||,|Nardi Shift Knob - Evolution - Black Leather - Part # 3202.00.0100
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Black Leather
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||3200-00-5006|,|20MAMIINKN|,|Nardi Shift Knob - Evolution - DARK Mahogany Wood|,|3200-00-5006|,|159.55|,|129.98|,||,||,||,||,||,||,|Nardi Shift Knob - Evolution - DARK Mahogany Wood
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Mahogany Wood
Condition Brand new and still in the factory box Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASHKNEVMAWO|,|20MAMIINKN|,|Nardi Shift Knob - Evolution - Mahogany Wood|,|NARDI-3200-00-5000|,|165.00|,|139.95|,||,||,|0.000 |,||,||,||,|Nardi Shift Knob - Evolution - Mahogany Wood - Part # 3200.00.5000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Mahogany Wood
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||ARSHKNORBLLE|,|20MAMIINKN|,|Nardi Shift Knob - Orbit - Black Leather - Aluminum Finish|,|NARDI-3574-01-0000|,|242.23|,|219.05|,||,||,|0.000 |,||,||,||,|Nardi Shift Knob - Orbit - Black Leather - Aluminum Finish - Part # 3574.01.0000
• Brand new in factory box with all hardware.
• Nardi 75th Anniversary Shift Knob.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Black Leather - Aluminum Finish
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASHKNPRBLLE|,|20MAMIINKN|,|Nardi Shift Knob - Prestige - Black Leather|,|NARDI-3222-01-0000|,|145.00|,|129.00|,||,||,|0.000 |,||,||,||,|Nardi Shift Knob - Prestige - Black Leather - Part # 3222.01.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Black Leather
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||3222-97-0000|,|20MAMIINKN|,|Nardi Shift Knob - Prestige - Brown Perforated Leather & Brown Smooth Leather with Brown Cross-Stitching|,|3222-97-0000|,|129.95|,|110.00|,||,||,||,||,||,||,|Nardi Shift Knob - Prestige - Brown Perforated Leather & Brown Smooth Leather with Brown Cross-Stitching
Nardi Gear Shift (Shifter) Knob - Prestige - Brown Perforated Leather & Brown Smooth Leather with Brown Cross-Stitching - Part # 3222.97.0000
Nardi is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
MADE IN ITALY from the finest Italian Leather
Universal Design for fitment on most vehicles with a 15mm or less shifter shaft diameter (does not fit models with lift-up reverse/reverse gear lock-out or models that require a button to change gear)
Installs with 3 set screws. Installation hardware and instructions are included.
Dimension:
105mm (4.13 inches) Tall
50mm (1.97 inches) wide at top [front to back]
43mm (1.69 inches) wide at top [side to side]
What's Included:
Shift Knob
Installation Instructions
Allen Wrench
(2) Rubber O-Rings
(3) Short Screws
(3) Long Screws
|,|||-||NASHKNPRMAWO|,|20MAMIINKN|,|Nardi Shift Knob - Prestige - Mahogany Wood|,|NARDI-3220-50-0000|,|169.00|,|139.95|,||,||,|0.000 |,||,||,||,|Nardi Shift Knob - Prestige - Mahogany Wood - Part # 3220.50.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Mahogany Wood
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||3222920000|,|20MAMIINKN|,|Nardi Shift Knob - Prestige Perforated/Smooth Black Leather with Red Stitching|,|3222920000|,|144.36|,|113.05|,||,||,||,||,||,||,|Nardi Shift Knob - Prestige Perforated/Smooth Black Leather with Red Stitching
Features:
Prestige Line Leather
Gear shift knob in black perforated leather & black smooth leather
Red cross stitching
Designed to suit your driving needs
Expertly crafted from the highest-grade materials
Perfect for your restoration jobs and needs
Nardi® with its masterpieces worldwide appreciated coniugates the past to the future. And from the past comes the love for details and the particular ability which used to be applied in the manufacture of every steering wheel. Each steering wheel, today, is handmade before and after polishing and painting phases. To the present belongs the sophisticated machines and computerized control instruments. From the past comes the knowledge and the experience to choose and treat "ancient" materials, such as natural leathers, woods, and precious briarwoods. From the present come some components of the manufacturing process and the most sophisticated technique of employment.
|,|||-||NASHKN|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NARDI SHIFT KNOBS|,||,||,||,||,||,||,||,||,||,||,|||-||NASTWHAN6038|,|NBINSTWH|,|Nardi Steering Wheel - Anni 60 - 380 mm (14.96 inch) - Wood - Glossy Spokes|,|NARDI-5012-39-3000|,|874.43|,|759.90|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Anni 60 - 380 mm (14.96 inch) - Wood - Glossy Spokes - Part # 5012.39.3000
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 380 mm (14.96 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood - Glossy Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHBIMAWO|,|NBINSTWH|,|Nardi Steering Wheel - Bisiluro - Mahogany Wood - Limited Edition|,|NARDI-5201-38-3700|,|6,300.00|,|3,744.00|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Bisiluro - Mahogany Wood - Limited Edition - Part # 5201.38.3700
It is the reproduction of the steering wheel mounted in the "Nardi Bisiluro" which participated at the Le Mans "24 Hours" in 1955. The Bisiluro or "Twin Torpedo" was a vehicle which housed the driver and fuel tank in the right fuselage, while in the left fuselage the engine and transmission were mounted. Up front, in the middle there was the radiator. The steering weel is manufactured according to the original drawings and using the original molds.
• Mahogany wood, glossy aluminium spokes with E. Nardi signature.
• Comes with a 410 mm x 410 mm x 100 mm (16.14 x 16.14 x 3.94 inch) wooden box.
• Each steering wheel is numbered. Limited Edition
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 390 mm x 300 mm (15.35 x 11.81 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Mahogany Wood
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCH350M|,|NBINSTWH|,|Nardi Steering Wheel - Challenge - 350 mm (13.78 inch) - Black Leather|,|NARDI-6089-35-2071|,|485.34|,|442.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Challenge - 350 mm (13.78 inch) - Black Leather - Part # 6089.35.2071
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Perforated Leather insert - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL330M|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 330 mm (12.99 inch) - Black Leather - Black Spokes or White Spokes|,|NARDI-6061-33-2001-1001|,|465.08|,|405.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 330 mm (12.99 inch) - Black Leather - Black Spokes - Part # 6061.33.2001 or White Spokes - Part# 6061.33.1001
• 92mm (3.62 inch) Grip
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|"Select Spokes Color" "Select Here" "Black" "Brushed Aluminum add(+$35)"|-||-|||-||NASTWHCL330M1|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 330 mm (12.99 inch) - Wood - Polished Spokes|,|NARDI-5061-33-3000|,|526.58|,|445.00|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 330 mm (12.99 inch) - Wood - Polished Spokes - Part # 5061.33.3000
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood - Polished Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL360M1|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Black Leather - Black Spokes|,|NARDI-6061-36-2001|,|487.78|,|435.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Black Leather - Black Spokes - Part # 6061.36.2001
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 360 mm (14.17 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||6061-36-3001|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Black Leather - Polished Spokes|,|6061-36-3001|,|578.95|,|442.02|,||,||,||,||,||,||,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Black Leather - Polished Spokes
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 360 mm (14.17 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Silver Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL360M5|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Black Leather - Silver Spokes|,|NARDI-6061-36-1001|,|477.78|,|414.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Black Leather - Silver Spokes - Part # 6061.36.1001
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 360 mm (14.17 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Silver Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL360M|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Black Perforated Leather - Black Spokes|,|NARDI-6062-36-2092|,|499.05|,|435.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Black Perforated Leather - Black Spokes - Part # 6062.36.2092
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 360 mm (14.17 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Perforated Leather - Black Spokes - Red Stitching
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL360M2|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Wood - Polished Spokes|,|NARDI-5061-36-3000|,|597.85|,|502.95|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Wood - Polished Spokes - Part # 5061.36.3000
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 360 mm (14.17 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood - Polished Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL360M4|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Wood - Polished Spokes with Round Holes|,|NARDI-5061-36-3100|,|818.60|,|694.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Wood - Polished Spokes with Round Holes - Part # 5061.36.3100
New to the Nardi Line, this steering wheel features polished aluminium spokes (slightly dished) as the Nardi Classic Steering Wheels, but it has round holes in the spokes instead of the standard slots.
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 360 mm (14.17 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood - Polished Spokes with Round Holes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL360M3|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Wood - Satin Spokes - Sale!|,|NARDI-5051-36-6300|,|664.79|,|585.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Wood - Satin Spokes - Part # 5051.36.6300
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 360 mm (14.17 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood - Satin Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL360M6|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Wood - Satin Spokes with Holes|,|NARDI-5061-36-6300|,|802.33|,|689.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 360 mm (14.17 inch) - Wood - Satin Spokes with Holes - Part # 5061.36.6300
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
• Flat satin spokes with round holes, complete with an Anni '60 horn button.
Fits Fits most vehicles. 360 mm (14.17 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood - Satin Spokes with holes and Anni '60 horn button.
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHCL390M|,|NBINSTWH|,|Nardi Steering Wheel - Classic - 390 mm (15.35 inch) - Wood - Polished Spokes|,|NARDI-5061-39-3000|,|591.24|,|495.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Classic - 390 mm (15.35 inch) - Wood - Polished Spokes - Part # 5061.39.3000
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 390 mm (15.35 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood - Polished Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service
|,|||-||NASTWHDECO33|,|NBINSTWH|,|Nardi Steering Wheel - Deep Corn - 330 mm (12.99 inch) - Black Perforated Leather|,|NARDI-6069-33-2093|,|489.43|,|425.00|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Deep Corn - 330 mm (12.99 inch) - Black Perforated Leather - Part # 6069.33.2093
• 53 mm (2.09 inch) Deep Dish
• 92mm (3.62 inch) Grip
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Perforated Leather - Red Stitching - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHDECO331|,|NBINSTWH|,|Nardi Steering Wheel - Deep Corn - 330 mm (12.99 inch) - Black Suede Leather|,|NARDI-6069-33-2094|,|391.43|,|362.05|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Deep Corn - 330 mm (12.99 inch) - Black Suede Leather - Part # 6069.33.2094
• 53 mm (2.09 inch) Deep Dish
• 92mm (3.62 inch) Grip
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Suede Leather - Red Stitching - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHDECO35|,|NBINSTWH|,|Nardi Steering Wheel - Deep Corn - 350 mm (13.78 inch) - Black Perforated Leather|,|NARDI-6069-35-2093|,|471.43|,|424.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Deep Corn - 350 mm (13.78 inch) - Black Perforated Leather - Part # 6069.35.2093
• 80 mm (3.15 inch) Deep Dish
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Perforated Leather - Red Stitching - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHDECO351|,|NBINSTWH|,|Nardi Steering Wheel - Deep Corn - 350 mm (13.78 inch) - Black Suede Leather|,|NARDI-6069-35-2094|,|471.43|,|354.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Deep Corn - 350 mm (13.78 inch) - Black Suede Leather - Part # 6069.35.2094
• 80 mm (3.15 inch) Deep Dish
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Suede Leather - Red Stitching - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHGA44WW|,|NBINSTWH|,|Nardi Steering Wheel - Gara 4-4 W-W - 365 mm (14.37 inch) - Wood|,|NARDI-5039-36-2500|,|626.11|,|525.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Gara 4-4 W-W - 365 mm (14.37 inch) - Wood - Part # 5039.36.2500
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 365 mm (14.37 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHKA350M1|,|NBINSTWH|,|Nardi Steering Wheel - Kallista - 350 mm (13.78 inch) - Black Leather - Glossy Spokes|,|NARDI-6314-35-3071|,|448.24|,|372.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Kallista - 350 mm (13.78 inch) - Black Leather - Glossy Spokes - Part # 6314.35.3071
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Glossy Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHKA350M|,|NBINSTWH|,|Nardi Steering Wheel - Kallista - 350 mm (13.78 inch) - Wood and Black Perforated Leather|,|NARDI-5055-35-3000|,|1,074.05|,|895.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Kallista - 350 mm (13.78 inch) - Wood and Black Perforated Leather - Part # 5055.35.3000
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Wood and Black Perforated Leather - Glossy Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHLE350M|,|NBINSTWH|,|Nardi Steering Wheel - Leader - 350 mm (13.78 inch) - Black Leather - Blue Leather inserts|,|NARDI-6090-35-2003|,|488.98|,|349.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Leader - 350 mm (13.78 inch) - Black Leather - Blue Leather inserts - Part # 6090.35.2003
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Blue Leather inserts - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHND1BA3|,|NBINSTWH|,|Nardi Steering Wheel - ND1 Basic - 350 mm (13.78 inch) - Black Leather|,|NARDI-6311-35-1071|,|560.04|,|452.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - ND1 Basic - 350 mm (13.78 inch) - Black Leather - Part # 6311.35.1071
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Perforated Leather inserts - Silver Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHTWLI35|,|NBINSTWH|,|Nardi Steering Wheel - Twin Line - 350 mm (13.78 inch) - Black Leather|,|NARDI-6092-35-2071|,|435.34|,|339.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Twin Line - 350 mm (13.78 inch) - Black Leather - Part # 6092.35.2071
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Perforated Leather insert - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHTWLI351|,|NBINSTWH|,|Nardi Steering Wheel - Twin Line - 350 mm (13.78 inch) - Black Leather with Red Perforated Leather Insert|,|NARDI-6092-35-2011|,|385.34|,|349.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Twin Line - 350 mm (13.78 inch) - Black Leather with Red Perforated Leather Insert - Part # 6092.35.2011
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather with Red Perforated Leather Insert - Black Spokes and Horn Ring
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHTWOSP3|,|NBINSTWH|,|Nardi Steering Wheel - Two Spokes - 330 mm (12.99 inch) - Black Perforated Leather|,|NARDI-6001-33-3000|,|615.52|,|472.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel - Two Spokes - 330 mm (12.99 inch) - Black Perforated Leather - Part # 6001.33.3000
The Two Spokes represents a big revolution among the steering wheels for both concept and use: in fact the big crown disappears and the shape is totally new!
Thanks to this new design, the view of the cockpit is not hidden anymore and the internal space for the legs grows considerably.
The frame is made of two simple spokes (from which the name) which design reminds the shape of classical wooden steering wheels which have characterized Nardi's trademark history.
At the end of the spokes there are two handles, covered by soft leather, that remind the airplanes cloches.
The invention is based on the fact that this two handles are free to move and turn around on their own axle, as they are connected with the steering wheel with balls bearing.
The feeling with this product is immediate: if it is true that you can drive the car with a single hand, it is also true that this creation increases security both in a challenging and in a relaxed drive: the driver is, in fact, obliged to have both hands on the steering wheel and, last but not least, at the right position of 9:15!
Evolutions of this new wheel could be innumerable.
The curiosity increases... and a new way to taste the pleasure of driving rises, with Nardi's tradition, innovation and precision!
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Perforated Leather - White Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHGRFINA|,|20MAMIINSTWH|,|Nardi Steering Wheel Grommet - Fits Nardi Horn Trim Ring|,|NARDI-4041-18-0104|,|39.95|,|28.73|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel Grommet - Fits Nardi Horn Trim Ring - Part # 4041.18.0104
• Made in Italy
• Brand new and still in the factory box.
Fits Fits Nardi Horn Trim Ring. Contact us to verify fit.
Quantity 1 Grommet
Color - Finish Black
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHHOBUDO|,|NBINSTWH|,|Nardi Steering Wheel Horn Button - Double Contact|,|NARDI-4041-01-0202|,|160.00|,|129.00|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel Horn Button - Double Contact - Part # 4041.01.0202
• Made in Italy
• Brand new and still in the factory packaging.
Fits Fits Nardi Classic and Deep Corn Steering Wheels. Contact us to verify fit.
Quantity 1 Horn Button
Color - Finish Black - Chrome Trim
Condition Brand new and still in the factory packaging
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHHOBUDO1|,|NBINSTWH|,|Nardi Steering Wheel Horn Button - Double Contact - Blank (For use with 24 mm Emblems|,|NARDI-4041-01-0204|,|115.00|,|98.95|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel Horn Button - Double Contact - Blank (For use with 24 mm Emblems) - Part # 4041.01.0204
• Made in Italy
• Brand new and still in the factory packaging.
• For use with 24 mm Emblems
Fits Fits Nardi Classic and Deep Corn Steering Wheels. Contact us to verify fit.
Quantity 1 Horn Button
Color - Finish Black - Chrome Trim
Condition Brand new and still in the factory packaging
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHHOBUSI|,|NBINSTWH|,|Nardi Steering Wheel Horn Button - Single Contact - Blank (For use with 24 mm Emblems)|,|NARDI-4041-01-0203|,|115.00|,|98.95|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel Horn Button - Single Contact - Blank (For use with 24 mm Emblems) - Part # 4041.01.0203
• Made in Italy
• Brand new and still in the factory packaging.
• For use with 24 mm Emblems
Fits Fits Nardi Classic and Deep Corn Steering Wheels. Contact us to verify fit.
Quantity 1 Horn Button
Color - Finish Black - Chrome Trim
Condition Brand new and still in the factory packaging
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHHOBUSI1|,|NBINSTWH|,|Nardi Steering Wheel Horn Button - Single Contact - Mazda|,|NARDI-4041-03-2427|,|185.00|,|159.00|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel Horn Button - Single Contact - Mazda - Part # 4041.01.0203+4041.03.2427
• Made in Italy
• Brand new and still in the factory packaging.
Fits Fits Nardi Classic and Deep Corn Steering Wheels.
Contact us to verify fit.
Quantity 1 Horn Button
Color - Finish Black - Chrome Trim - Mazda Logo
Condition Brand new and still in the factory packaging
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWHHOBUTR|,|20MAMIINSTWH|,|Nardi Steering Wheel Horn Button Trim Ring - Polished Aluminum|,|NARDI-4041-18-0800|,|163.84|,|132.02|,||,||,|0.000 |,||,||,||,|Nardi Steering Wheel Horn Button Trim Ring - Polished Aluminum - Part # 4041.18.0800
• Made in Italy
• Brand new and still in the factory package.
Fits Fits most Nardi Classic Steering Wheels. Contact us to verify fit.
Quantity 1 Horn Trim Ring
Color - Finish Polished Aluminum
Condition Brand new and still in the factory package.
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||NASTWH1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NARDI STEERING WHEELS|,||,||,||,||,||,||,||,||,||,||,|||-||NEWOWNERS|,||,|NEW MIATA OWNERS|,||,||,||,||,||,||,||,|dfhadhdfa|,||,|
First of all, congratulations, and welcome to GoMiata.com, the #1 Source for Miata Parts and Accessories. Be sure to sign up for our free catalog! - Click Here.
As a new (or new to you) Miata owner you will see that as each day of ownership goes by, you will love your Miata more and more. We've created this guide to help make you much more knowledgeable about your Miata and all the great things you can do to improve it!
Okay, so how do I get started fixing up my Miata?
One of the most common questions we hear from new Miata owners is, “I want to start modifying and customizing my Miata, but I’m not sure how to start!”
So we have created this helpful guide to assist you in modifying your Miata and answering your questions!
How can I get more power out of my Miata?
The great thing about the Miata is that it responds very well to many modifications. If you want to squeeze out more horsepower from your Miata there are a few ways you can go.
We recommend starting with the MagnaFlow Miata Stainless Cat-Back System PERFORMANCE EXHAUST
and Racing Beat Intake. You can do one of these or both, but they work together synergistically and can give you a nice horsepower increase. By upgrading your intake and exhaust you are allowing the engine to breathe much easier. This helps the engine perform better, especially at higher RPM and thus provides you with more horsepower. Again, keep in mind, our exhaust systems ARE NOT LOUD RACER BOY EXHAUSTS.. They are nice, smooth and mellow. If you want to squeeze out even more power, consider adding a Racing Beat 4-1 Header to the items above.
If you haven’t changed your spark plug wires recently we highly recommend adding a set of Magnecor Performance Plug wires – we use these on all our company Miatas.
I want to improve my Miata’s exhaust system, but I don’t want a loud “racer boy” exhaust like those annoying Civics I can hear a block away. Do your exhausts sound like that?
Trust us, we can’t stand those load raspy exhausts, with the tips that look like coffee cans, either. Our RoadsterSport Exhaust Systems are MELLOW and just a little louder than stock. Not only do our free flowing exhaust systems improve performance by replacing your Miata’s restrictive exhaust system, but they will give your Miata a wonderful deep, mellow sporty sound. Never raspy or loud.
My Miata handles great, but I want it to handle EVEN BETTER! What’s the best way to improve my Miata’s handling?
Improving your Miata's handling does not have to come at the expense of a harsh ride. One of the best ways to improve the handling of your Miata is with a set of performance springs and shocks. The stock Miata shocks usually only last about 30,000 miles. It’s an often overlooked maintenance item, but worn out shocks will lead to poor handling and a bouncing effect with bumps or dips in the road. A new set of performance shocks will greatly improve the handling of your Miata and the damping adjustment makes it easy to “stiffen” or “soften” the shocks whenever you wish in order to meet your comfort level, driving style or performance needs. We especially like the KYB Shocks for their great performance and easy adjustability.
When you replace your shocks, you can also install a set of performance springs. We especially like the Eibach Performance Springs as they are an excellent balance between performance and smooth ride. Performance springs improve handling two ways. First of all, they usually lower your Miata about an inch. By doing so they not only get rid of that ugly wheel well gap but they also lower your Miata’s center of gravity. This allows the car to maneuver more quickly through turns by reducing body roll.
If you want to take your Miata’s handling to an even higher level, we recommend installing the Racing Beat Tubular Front Miata Sway Bar along with performance springs and shocks. Sway bars, or more correctly, anti-sway bars, work by helping your Miata minimize cornering lean and respond to steering inputs more quickly. Your Miata already comes with a set of sway bars. However, by installing stiffer, performance aftermarket bars, you can greatly improve your Miata’s handling. You Miata will corner much flatter and be very responsive through the turns.
Here are a few more important things you should know as a Miata owner that will allow you to get many years of trouble-free miles from your Miata.
1. It's very important to properly maintain your Miata. The Miata is a very-trouble free car, but like anything, you need to take care of it. It's very important to change your oil every 3,000 miles and your timing belt every 60,000. We recommend using genuine Mazda filters since they have an anti-drainback valve on them that allows more oil to stay in the pump, rather than all drain back to the pan, so at startup - when most wear occurs - the oil circulates into the engine much more quickly. Now some other filters also have this feature, like the Mobil 1 filter, but stay away from Fram and Purolator.
In terms of the timing belt, if it breaks it won't damage your engine, but it will leave you completely stranded. So BE SURE it is changed EVERY 60,000 miles. In order to make it easier, we've put together some great maintenance packages. Take a look under Genuine Mazda Parts to get more information.
2. If you plan on working on your Miata yourself, you NEED to have a Haynes Shop Manual (90-97) or a Factory Workshop Manual. We cannot recommend this strongly enough, and while you are at it, pick up the fantastic book, Miata Performance Projects which shows you not only how to install performance items, but how to do all types of maintenance on your car as well.
3. Most people would not necessarily describe a Miata as "powerful", but then again, even most Miata owners do not tap into the potential of the Miata. Why? Because the first thing you must do if you want more power out of your Miata is to shift at a much higher RPM. Most people never shift beyond 4,000-5,000 RPM. However, if this is where you are shifting your Miata, you are missing out on most of the cars power. Miatas make their peak horsepower around 6,500 RPM, so when you want power, you must shift at that point. You will be amazed at how much more power you feel. Not to mention that the next gear shift, you will be in more of a "sweet spot", and so on.
You may be asking, "isn't this bad for the car?" In a word... No. As long as the car is warmed up and in good condition, you can shift it at 6,500 RPM all day long with no damage whatsoever to the engine. It's made to rev that high!
4. Do not overinflate your tires. Since the Miata is a very light car, Mazda recommends 26-28 PSI in the tires. Don't beleive me? Check the sticker on your drivers side door jamb. Most people mistakenly inflate their tires to the maximum pressure on the tires sidewall, but this is not correct. Check your tire pressure and make sure it is between 26-28 PSI for an excellent safe ride.
There is one exception to the tire pressure. That is, if you are autocrossing or driving for performance, you can increase this pressure for less rolling resistance, however you do sacrifice some safety and ride comfort for this.
That's pretty much it! Just make sure to follow the recommend service schedule in your owners manual and you should be able to enjoy your Miata for many years to come.
Welcome to the Miata family! We look forward to serving you as our customer. Feel free to give us a call at 1-866-GO-MIATA if you have any questions!
|,|||-||NEW-PARTS|,||,|New Parts|,||,||,||,||,||,||,||,||,||,||,|||-||NEW|,|DONTMISS|,|NEW PARTS AT GO MIATA|,||,||,||,|MAZDA MX-5 MIATA NEW PARTS AND ACCESSORIES AT GO MIATA|,||,||,||,||,||,|
|,|||-||SPONSORLINK123456|,||,|No Name|,||,||,||,||,||,||,||,||,||,||,|||-||HK-700SL|,|NEW|,|NRG AC Style Hand Brake - Brushed Aluminum|,|HK-700SL|,|65.95|,|49.98|,||,||,||,||,||,||,|NRG AC Style Hand Brake - Brushed Aluminum
Handbrake Handle Cover : Brushed Aluminum
All necessary hardware included.
|,|||-||HK-700CG|,|NEW|,|NRG AC Style Hand Brake - Chrome Gold Dip|,|HK-700CG|,|65.95|,|54.98|,||,||,||,||,||,||,|NRG AC Style Hand Brake - Chrome Gold Dip
Handbrake Handle Cover : Chrome Gold Dip
All necessary hardware included.
|,|||-||HK-700MB|,|NEW|,|NRG AC Style Hand Brake - Matte Black|,|HK-700MB|,|65.95|,|54.98|,||,||,||,||,||,||,|NRG AC Style Hand Brake - Matte Black
Handbrake Handle Cover : Matte Black
All necessary hardware included.
|,|||-||HK-700MC|,|NEW|,|NRG AC Style Hand Brake - Neo Chrome Finish|,|HK-700MC|,|65.99|,|54.98|,||,||,||,||,||,||,|NRG AC Style Hand Brake - Neo Chrome Finish
Handbrake Handle Cover : Neo Chrome
All necessary hardware included.
|,|||-||NRG-BLACK-CARBON-FIBER-OVERLAY-HOOD-PINS-LOCK-WITH-KEY|,|NBBODYSTYLING|,|NRG Black Carbon Fiber Overlay Hood Pins Lock With Key|,|CHL-100|,|89.50|,|64.98|,||,||,|0.000 |,||,||,||,|NRG Black Carbon Fiber Overlay Hood Pins Lock With Key
NRG Black Carbon Fiber Overlay Hood Pins Lock provide the perfect complement to any hood, carbon fiber or not, by providing an extra level of safety and style. Carbon fiber locks allow a virtually seamless look to a carbon fiber hood which needs extra support due to its light weight nature.
Features
Steel construction for lock and sandwich type mounting points
Carbon fiber overlay to seamless look
Available in silver or black carbon fiber
Carbon Fiber Overlay Hood Lock With Key
Color: Black
|,|||-||ST-015MC-BSB|,|20MAMIINSTWH|,|NRG Classic Black Sparkled Color Wood Grain Steering Wheel Neochrome|,|ST-015MC-BSB|,|199.99|,|164.02|,||,||,||,||,||,||,|NRG Classic Black Sparkled Color Wood Grain Steering Wheel Neochrome
-350mm
Made from high quality materials with a sophisticated design to let you feel the smooth white colored luxurious wood and the aggressive 3 spoke center neochrome finish. A great addition to any car for added style and look.
|,|||-||NRG-CLASSIC-BLACK-NEO|,|20MAMIINSTWH|,|NRG Classic Black Wood Grain Steering Wheel Neochrome *SALE* |,|ST-015MC-BK|,|179.99|,|149.98|,||,||,|0.000 |,||,||,||,|NRG Classic Black Wood Grain Steering Wheel Neochrome
-350mm
Made from high quality materials with a sophisticated design to let you feel the smooth white colored luxurious wood and the aggressive 3 spoke center neochrome finish. A great addition to any car for added style and look.
|,|||-||NRG-CLASSIC-BLUE-NEO|,|20MAMIINSTWH|,|NRG Classic Blue Wood Grain Steering Wheel Neochrome *SALE* |,|ST-015MC-BL|,|179.99|,|149.98|,||,||,|0.000 |,||,||,||,|NRG Classic Blue Wood Grain Steering Wheel Neochrome
-350mm
Made from high quality materials with a sophisticated design to let you feel the smooth white colored luxurious wood and the aggressive 3 spoke center neochrome finish. A great addition to any car for added style and look.
|,|||-||NRG-CLASSIC-PURPLE-NEO|,|20MAMIINSTWH|,|NRG Classic Purple Wood Grain Steering Wheel Neochrome *SALE* |,|ST-015MC-PP|,|179.99|,|149.98|,||,||,|0.000 |,||,||,||,|NRG Classic Purple Wood Grain Steering Wheel Neochrome
-350mm
Made from high quality materials with a sophisticated design to let you feel the smooth white colored luxurious wood and the aggressive 3 spoke center neochrome finish. A great addition to any car for added style and look.
|,|||-||NRG-CLASSIC-RED-NEO|,|20MAMIINSTWH|,|NRG Classic Red Wood Grain Steering Wheel Neochrome *SALE* |,|ST-015MC-RD|,|179.99|,|149.98|,||,||,|0.000 |,||,||,||,|NRG Classic Red Wood Grain Steering Wheel Neochrome
-350mm
Made from high quality materials with a sophisticated design to let you feel the smooth white colored luxurious wood and the aggressive 3 spoke center neochrome finish. A great addition to any car for added style and look.
|,|||-||NRG-CLASSIC-NEO-CHROME|,|20MAMIINSTWH|,|NRG Classic White Wood Grain Steering Wheel Neochrome *SALE* |,|ST-015MC-WT|,|179.99|,|149.98|,||,||,|0.000 |,||,||,||,|NRG Classic White Wood Grain Steering Wheel Neochrome
-350mm
Introducing the ST-015MC-WT Series. Made from high quality materials with a sophisticated design to let you feel the smooth white colored luxurious wood and the aggressive 3 spoke center neochrome finish. A great addition to any car for added style and look.
|,|||-||ST-015MC-GL-BL-PP|,|NEW|,|NRG Classic White Wood Grain Steering Wheel Neochrome Glow - Neochrome Spokes|,|ST-015MC-GL-BL-PP|,|189.99|,|159.98|,||,||,||,||,||,||,|NRG Classic White Wood Grain Steering Wheel Neochrome Glow - Neochrome Spokes
-350mm
Made from high quality materials with a sophisticated design to let you feel the smooth white colored luxurious wood and the aggressive 3 spoke center neochrome finish. A great addition to any car for added style and look.
|,|"Select Color" "Select Here" "Green" "Blue" "Purple"|-||-|||-||HK-800SL|,|NEW|,|NRG GEN 3 Hand Brake - Brushed Aluminum|,|HK-800SL|,|65.99|,|54.98|,||,||,||,||,||,||,|NRG GEN 3 Hand Brake - Brushed Aluminum
Handbrake Handle Cover : Brushed Aluminum
All necessary hardware included.
|,|||-||HK-800CG|,|NEW|,|NRG GEN 3 Hand Brake - Chrome Gold Dip|,|HK-800CG|,|65.99|,|54.98|,||,||,||,||,||,||,|NRG GEN 3 Hand Brake - Chrome Gold Dip
Handbrake Handle Cover : Chrome Gold Dip
All necessary hardware included.
|,|||-||HK-800MB|,|NEW|,|NRG GEN 3 Hand Brake - Matte Black|,|HK-800MB|,|65.99|,|54.98|,||,||,||,||,||,||,|NRG GEN 3 Hand Brake - Matte Black
Handbrake Handle Cover : Matte Black
All necessary hardware included.
|,|||-||HK-800MC|,|NEW|,|NRG GEN 3 Hand Brake - Neo Chrome Finish|,|HK-800MC|,|65.99|,|54.98|,||,||,||,||,||,||,|NRG GEN 3 Hand Brake - Neo Chrome Finish
Handbrake Handle Cover : Neo Chrome Finish
All necessary hardware included.
|,|||-||HK-900BC|,|NEW|,|NRG Hand Brake - Black Carbon Fiber|,|HK-900BC|,|109.99|,|84.99|,||,||,||,||,||,||,|NRG Hand Brake - Black Carbon Fiber
Handbrake Handle Cover : Black Carbon Fiber
All necessary hardware included.
|,|||-||HK-900SL|,|NEW|,|NRG Hand Brake - Brush Aluminum|,|HK-900SL|,|65.99|,|54.99|,||,||,||,||,||,||,|NRG Hand Brake - Brush Aluminum
Handbrake Handle Cover : Brush Aluminum
All necessary hardware included.
|,|||-||HK-900TI|,|NEW|,|NRG Hand Brake - Titanium Aluminum|,|HK-900TI|,|65.99|,|49.98|,||,||,||,||,||,||,|NRG Hand Brake - Titanium Aluminum
Handbrake Handle Cover : Titanium Aluminum
All necessary hardware included.
|,|||-||HK-990SS|,|NEW|,|NRG Hand Brake - Weighted Brush Aluminum|,|HK-990SS|,|89.99|,|65.98|,||,||,||,||,||,||,|NRG Hand Brake - Weighted Brush Aluminum
Handbrake Handle Cover : Weighted Brush Aluminum
All necessary hardware included.
|,|||-||NRGINNOVATIONS|,|SHOP-BY-TOP-MIATA-BRANDS|,|NRG Innovations|,||,||,||,||,||,||,||,||,||,||,|||-||NRGINDEDIST3|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Deep Dish Style 350mm Steering Wheel *SALE* |,|NRG-ST-006S|,|169.99|,|139.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Deep Dish Style 350mm Steering Wheel
These units provide the best in both quality and styling. Many different sizes and designs available from classy smooth luxury leather with red stitch to 3 in. deep dish suede steering wheels for maximum control, NRG steering wheels are sure to give your vehicle that extra edge of control and styling.
|,|"Select Finish" "Suede" "Leather"|-||-|||-||NRGINDEDIST31|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Deep Dish Style 350mm Steering Wheel w/ Yellow Center Mark *SALE* |,|NRG-RST-006|,|175.55|,|145.95|,||,||,|0.000 |,||,||,||,|These units provide the best in both quality and styling. Many different sizes and designs available from classy smooth luxury leather with red stitch to 3 in. deep dish suede steering wheels for maximum control, NRG steering wheels are sure to give your vehicle that extra edge of control and styling.
|,|"Select Material" "Select Here" "Leather" "Premium Suede"|-||-|"Select Finish" "Select Here" "Black" "Gunmetal" "Blue" "Red" "Silver" "White" "Black - No Mark" "Gunmetal - No Mark" "Blue - No Mark" "Red - No Mark" "Silver - No Mark"|-||-|||-||NRGINDEDISTL|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Deep Dish Style Limited Edition 350mm Sport Steering Wheel w/ Double Center Marks *SALE* |,|NRG-RST-016|,|179.99|,|164.08|,||,||,|0.000 |,||,||,||,|The newest addition to our line of steering wheels is the ST-016R 3” deep dish. Available in an assortment of colors it will definitely add a touch of style to your interior. Wrapped in high quality leather or suede, the new wheels have a superb feel and look to them. Whether you’re braking late to steal your rivals’ apex or cruising around town make NRG Innovations your number one choice for steering wheels.
|,|"Select Material" "Select Here" " " "Leather" "Premium Suede"|-||-|"Select Finish" "Select Here" "New Blue w/Blue Center Marks" "Orange w/Orange Center Marks" "Purple w/Purple Center Marks - Suede Only" "Red w/Red Center Marks - Suede Only" "Black w/Blue Center Marks - Suede Only"|-||-|||-||NRGINVOST|,|MAZDA-MX-5-MIATA-BATTERY-1999-2005|,|NRG Innovations EPAC-200 Compact Size Voltage Stabilizer|,|NRG-EPAC-200|,|109.99|,|71.98|,||,||,|0.000 |,||,||,||,|Connected to battery terminals, this unit stabilizes power output to all electrical components drawing power from battery. Using an independent power source, this unit boosts batterypower when under high loads, thus regulating fluctuations coming from the battery that can result in loss of power or responsiveness from ignition system components. Can also improve interior lighting as well as stereo equipment performance.
Features:
Titanium color with Positive and Negative wires
*Universal fit
|,|"Select Color" "Select Here" "Black" "Blue" "Red" "Titanium"|-||-|||-||NRGINEVOST32|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Evo Style 350mm Steering Wheel *SALE* |,|NRG-ST-008R|,|179.99|,|139.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Evo Style 350mm Steering Wheel
The ST-008R "Evo" Sport Steering wheel is the perfect wheel for auto tuners who wants the feel of soft supple leather and elegant chrome finish highlighted with red stitches to complete that aggressive look inside the cockpit. These units provide the best style in both quality and durability. NRG steering wheels are sure to give your vehicle that extra edge of control and look to match your lifestyle.
|,|||-||NRGINFLBOST3|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Flat Bottom Style 320mm Steering Wheel *SALE* |,|NRG-ST-009S|,|159.99|,|139.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Flat Bottom Style 320mm Steering Wheel
These units provide the best in both quality and styling. Many different sizes and designs available from classy smooth luxury leather with red stitch to 3 in. deep dish suede steering wheels for maximum control, NRG steering wheels are sure to give your vehicle that extra edge of control and styling.
|,|"Select Finish" "Suede" "Leather|-||-|||-||NRGINGRWISY|,|MAZDA-MX-5-MIATA-BATTERY-1999-2005|,|NRG Innovations Ground Wire System |,|NRG-GK-100|,|79.99|,|59.98|,||,||,|0.000 |,||,||,||,|Installed on battery? negative terminal or onto chassis, this unit centralizes the grounding point of the electrical mechanisms of the vehicle. This causes less fluctuation for the electrical system and can improve overall performance and responsiveness of the engine end electrical components resulting from proper grounding. A must-have for any vehicle with engine swaps since grounding tends to be an issue with these types of performance modifications.
Features:
Copper center hub
High Quality 12 gauge low resistance wires with smoke titanium silicone wrap.
|,|"Select Color" "None" "Red" "Blue"|-||-|||-||NRGINMAMIDIP|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|NRG Innovations Mazda Miata Diversion Panel 1990-1997|,|NRG-DVP-2001|,|109.99|,|79.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Mazda Miata Diversion Panel 1990-1997
NRG Innovations has developed a new line of Radiator Diversion Panels. These units maximize the cooling capabilities of the radiator. Rather than letting air escape through structural gaps on the vehicle, it is redirected into the radiator. By increasing the amount of airflow passing through the radiator, the efficiency of the radiator is improved.
DVP-2001 : Diversion Panel
- Made from 1mm thick rigid stainless steel plate
- Precision laser cut brushed finish prevents overheating under extreme driving conditions
- Cooler temperatures are kept consistent under all driving conditions
- Easy to install using standard hand tools
- Motorsports functionality with show quality looks
Car Compatibility:
90-98 Mazda Miata (w/ Pop-Up Headlamps)
|,|||-||NRGINMAMIDIP1|,|NBBODYSTYLING|,|NRG Innovations Mazda Miata Diversion Panel 1999-2005|,|NRG-DVP-2002|,|119.99|,|98.04|,||,||,|0.000 |,||,||,||,|NRG Innovations Mazda Miata Diversion Panel 1999-2005
This well crafted aluminum diversion panel by NRG will divert air directly into your radiator, giving it greater cooling efficiency.
|,|||-||NRGINFURE|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|NRG Innovations Mazda Miata Fuel Regulator 1990-2005|,|NRG-FRG-100|,|139.99|,|109.98|,||,||,|0.000 |,||,||,||,|Installed onto the fuel rail or in-line with fuel lines, this units allows fine turning of fuel curve mechanically by increasing or decreasing fuel pressure to the fuel lines. Boost dictated to steady fuel pressure even under boost conditions resulting from forced induction.
Features:
Aluminum Construction
Mounting hardware included
|,|"Select Color" "Silver" "Black Chrome" "Titaninum"|-||-|||-||NRGINFURECO|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|NRG Innovations Mazda Miata Fuel Regulator Connection 1990-2005|,|NRG-FRG-TNMC|,|68.99|,|36.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Mazda Miata Fuel Regulator Connection 1990-2005
Vehicle specific fuel pressure regulator connectors which allow the use of NRG Innovations remote mounted fuel pressure regulators.
|,|||-||NRGINRACAP|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|NRG Innovations Mazda Miata Radiator Cap Cover 1990-2012|,|NRG-RDC-100|,|49.99|,|34.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Mazda Miata Radiator Cap Cover 1990-2012
|,|"Select Color" "Black" "Blue" "Red" "Rose Gold" "Matte Silver"|-||-|||-||NRGINOILCACA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-2006-2012|,|NRG Innovations Oil Catch Can|,|NRG-OCC-100|,|99.99|,|74.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Oil Catch Can
Installed connecting the PCV Valve or pressure release hose to the intake pipe, this unit captures and stores excess oil coming from valve cover. This results in clean air recirculating back into the intake unlike the factory system which puts the release tube directly back into the engine. Results a decrease in valve cover pressure prolonging engine life and increasing performance. Also a must in any competition car due to regulations concerning oil on the track.
Dimensions: 7 x 3 x 2 1/2 inches
|,|"Select Finish" "Chrome" "Matte Black" "White" "Chrome Gold"|-||-|||-||NRGINQUREKIT|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|NRG Innovations Quick Release Kit Gen 2.5 - Sale! |,|NRG-SRK-250BL|,|175.99|,|149.02|,||,||,|0.000 |,||,||,||,| Click Picture to see All Products
Picture 1
Picture 2
Another upgrade utilizing all the features of the Second Generation Systems with the added benefit of a flared ring. This allows much easier release for the steering wheel by providing added leverage and grip onto the pull ring. Perfect for race applications where the use of gloves are required.
|,|"Select Color" "Select Here" "Black" "Black/Chrome Gold add(+$15)" "Black/NeoChrome add(+$15)" "Black/Black Chrome add(+$15)" " " "Blue" "Carbon Fiber add(+$40)" "Gun Metal/Neochrome add(+$15)" "Green add(+$15)" "Green/NeoChrome add(+$15)" " " "New Blue add(+$15)" "New Blue/NeoChrome add(+$15)" "Orange add(+$15)" "Orange/NeoChrome add(+$15)" "Pink add(+$15)" "Pink/NeoChrome add(+$15)"
"Purple add(+$15)" "Purple/NeoChrome add(+$15)" " " "Red add(+$15)" "Red/NeoChrome add(+$15)" "Orange add(+$15)" "Orange/NeoChrome add(+$15)" "Silver" "Silver/NeoChrome add(+$15)"|-||-|||-||NRGINQUREKIT3|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|NRG Innovations Quick Release Kit Gen 3.0|,|NRG-SRK-650BK|,|189.99|,|179.00|,||,||,|0.000 |,||,||,||,|NRG Innovations Quick Release Kit Gen 3.0
Click Picture to see All Products
Introducing our new generation 3.0 Quick Release with its new sleek design offers style and functionality that surpasses all previous versions. With the addition of the two larger levers, steering wheel removal has never been easier. The generation 3.0 utilizes the same patented ball and lock mechanism found in the previous versions and is available in three new colors: Green, Orange, and New Blue.
|,|"Select Finish" "Select Here" "Black" "Black/ChromeGold" "Black/NeoChrome" "Blue" "Gun Metal" "Green" "Red" "New Blue" "Orange" "Pink" "Purple" "Red" "Rose Gold" "Silver"|-||-|||-||NRGINDUSPST3|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Race Style 320mm Steering Wheel *SALE* |,|NRG-ST-012R-BL|,|159.05|,|135.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Race Style 320mm Steering Wheel
These units provide the best in both quality and styling. Many different sizes and designs available from classy smooth luxury leather with red stitch to 3 in. deep dish suede steering wheels for maximum control, NRG steering wheels are sure to give your vehicle that extra edge of control and styling.
|,|"Select Finish" "Leather w/Red Stitching" "Leather w/Blue Stitching" "Suede w/Red Stitching"|-||-|||-||NRGINPISTSTW|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Sport Style 320mm Steering Wheel *SALE* |,|NRG-RST-001|,|179.99|,|145.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Sport Style 320mm Steering Wheel
These units provide the best in both quality and styling. Many different sizes and designs available from classy smooth luxury leather with red stitch to 3 in. deep dish suede steering wheels for maximum control, NRG steering wheels are sure to give your vehicle that extra edge of control and styling.
|,|"Select Trim" "Black" "Blue" "White" "Red" "Silver" "Carbon"|-||-|||-||NRGINSULOWDO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Super Low Down Shift Knob Black - Universal|,|NRG-SK-140BK|,|59.99|,|39.98|,||,||,|0.000 |,||,||,||,|
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
*Universal fit, tight fit adapter recommended*
|,|"Select Finish" "Black" "Silver"|-||-|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a Tight Fit Adapter add (+$19.95)"|-||-|||-||NRGINTWOBUST|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Two Button Style 320mm Steering Wheel *SALE* |,|NRG-ST-007S|,|149.99|,|129.98|,||,||,|0.000 |,||,||,||,|NRG Innovations Two Button Style 320mm Steering Wheel
These units provide the best in both quality and styling. Many different sizes and designs available from classy smooth luxury leather with red stitch to 3 in. deep dish suede steering wheels for maximum control, NRG steering wheels are sure to give your vehicle that extra edge of control and styling.
-center piece is black chrome
|,|"Select Finish" "Suede" "Leather"|-||-|||-||NRGINTYSTSHK|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Innovations Type-M Style Shift Knob - Universal Fit|,|NRG-SK-150SL|,|69.99|,|49.98|,||,||,|0.000 |,||,||,||,|
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
*Universal fit, tight fit adapter recommended*
|,|"Select Finish" "Select Here" "Silver" "Matte Black" "Carbon Fiber add(+$10)" "Multi Color add(+$10)|-||-|"Would you like a Tight Fit Adapter?" "No" "Yes, I like a Tight Fit Adapter add(+$19.95)"|-||-|||-||RST-018BR-BK|,|20MAMIINSTWH|,|NRG Reinforced Deep Dish Brown Wood Grip Steering Wheel|,|RST-018BR-XX|,|229.55|,|198.02|,||,||,||,||,||,||,|NRG Reinforced Deep Dish Brown Wood Grip Steering Wheel
- Premium Brown Colored Wood
- 350mm or 13.7" Width
- 5mm thickness with slits
- 3" Deep Dish
Constantly innovating and detail oriented, we address design flaws that our competitors overlook. In 2016, we've made a 25% increase in material thickness as well as 50% more welding on an alloyed halo that spans the entire steering wheel. Making these the strongest steering wheels in the market.
|,|"Select Finish" "Select Here" "Black Matte Spoke Finish" "Neochrome Spoke Finish"|-||-|||-||NRGINSECAFIW|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|NRG Universal Ball Style Shift Knob - Black Carbon Fiber|,|NRG-SK-300BC|,|79.99|,|49.98|,||,||,|0.000 |,||,||,||,|This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
*Universal fit, tight fit adapter recommended*
|,|||-||OPDOSIWICHLO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Optional Door Sills With Chrome Logo 2006-2014|,|409-MAMA06OA|,|69.99|,|59.02|,||,||,|0.000 |,||,||,||,|Mazda MX-5 Miata 2006-2014, Optional Door Sills With Chrome Logo, 10 Pcs.
This dash kit is available in a huge variety of materials. You can choose from synthetic woods, real wood veneers, real carbon fibers, as well as aluminums and flat colors. Polyurethane coating is applied to all the dash trim kits for a lifetime protection. Save hundreds of dollars over what the dealer would charge by installing it yourself.
These kits are special order, custom cut and are not returnable. Please allow 5-7 business days for production of your dash kit.
|,|"Select Material for 2006-2014" "None" "Real Dark Mahogany-RWMW" "Real Japanese Cherry-RJCW" "Real Medium Burl-RMBW" "Real Platinum Burl-RPW" "Real Rosewood-RRW" "Real Walnut Burl-RWBW" "Real Carbon Fiber-RCF" "Real Blue Carbon Fiber-RBCF" "Real Light Blue Carbon Fiber-RLBCF" "Real Blue and Black Carbon Fiber-RBBCF" "Real Green and Black Carbon Fiber-RGBCF" "Real Orange and Black Carbon Fiber-ROBCF" "Real Red and Black Carbon Fiber-RRBCF" "Real Red Carbon Fiber-RRCF" "Real Silver Wire Carbon Fiber-RSWCF" "Real Yellow and Black Carbon Fiber-RYBCF" "Real Yellow Carbon Fiber-RYCF" "African Zebra-SAZW" "Bird's Eye-SBEW" "Dark Zebra-SDZW" "Ebony Zebra-SEZW" "Honey Burl-SHBW" "Newport Burl-SNBW" "Titanium Burl-STBW" "Blue-SBlue" "Black-SBlack" "Orange-SOrange" "Real Chrome-RC" "Real Brushed Aluminum-RBA" "Red-SRed" "Titanium Burl-STBW" "White-SWhite" "Yellow-SYellow"|-||-|||-||SHIPPINGINFO|,||,|ORDER & SHIPPING INFORMATION|,||,||,||,||,||,||,||,|adfasfag|,||,|
PAYMENT
VISA, MasterCard, Discover, American Express, Paypal, certified checks, or money order (which may be held until cleared). If paying by charge card we will require charge card number, expiration date, complete billing address and the CVV2 code on the back of the card. Due to increasing fraud, some foreign orders may require additional documentation to process your order.
PRICES
All prices are subject to change without prior notice. Go Miata reserves the right to correct any typographical errors.
THERE ARE 2 WAYS TO ORDER:
1) For fastest order processing order online here on our 100% secure site. Go Miata web site is tested and certified daily to pass the “McAfee Secure” Security Scan. To help address concerns about possible hacker access to your confidential data, and the safety of visiting this site, the "live" McAfee Secure mark appears only when this site passes the daily McAfee Secure tests. In addition to McAfee Secure we also use Yahoo's state of the art 128 bit SSL Encryption to double protect all of your information.
You will have the opportunity to view your order total, including shipping charges on the first page of checkout, before submitting your order and credit card information.
2) If you prefer, call us at 1-840-218-1388. This line is for orders. Please be sure to jot down the product codes of the items you'd like to order and provide them to the order desk operator.
*For product questions or customer service, email us, or call, Monday through Friday, 9:00 AM to 5:00 PM PST at 1-840-218-1388*
SHIPPING POLICY & RATES
GoMiata.com prides itself on fast, reliable, low cost shipping. As soon as we ship your order, you will receive an email with your tracking number. (With the exception of Westco Battery orders which are shipped factory direct and usually in your hands within 2-3 days.)
GO MIATA has THE LOWEST SHIPPING COST in our industry. Go Miata values you as a customer and wants to ensure that you receive the best shipping price available. If you find a lower shipping price in the Miata Industry, and meet the terms and conditions, Go Miata will match the shipping price. Shipping price match must be approved before purchase and is not valid for prior purchases. Please allow up to two full business days for shipping price match approval.
Policy information is available by calling 1-840-218-1388. This policy is subject to change without notice, we also reserve the right to not match any shipping prices from any competitors at any given time.
Each shipment will reflect the appropriate shipping, handling and insurance charges, dependent upon the parts value in each shipment.
State Sales Tax: Orders shipped to California will be charged state sales tax. OUTSIDE OF CALIFORNIA? - YOU PAY NO SALES TAX!
Same Day Shipping: Domestic orders received Monday through Friday by 3:00 PM PST / 6:00 PM EST are normally shipped the same day. Parts must be from our inventory, offer does not apply to factory direct, special order and some oversized items that take special packing. Orders after 3:00 PM PST / 6:00 PM EST will be shipped next business day.
We stock almost all of our items in our warehouses ready to be shipped to you. Most orders ship the same day and your Miata goodies will usually be in your hands in 2-8 business days. Special order items such as leather seat skins, may take 5-7 days to ship. Roll bars may take 3-10 business days to ship. Genuine Mazda Miata OEM parts may take 2-7 business days to ship.
Our ground shipping charges are calculated based on the total cost of your order. In order to get your order to you as quickly as possible, we may send multiple item orders in separate shipments, you will never have to pay more for this benefit! Some larger or heavier items may have additional shipping charges that will be reflected in your total before you submit your credit card information.
Outside of California Customers - You get our low shipping rates and PAY NO SALES TAX!
Expedited shipping is available. Simply click the box for "Faster Shipping" after you check out and we will contact you with the different options and the costs.
BEST SHIPPING RATES IN THE MIATA INDUSTRY!!!
ORDER TAXABLE AMOUNT - GROUND SHIPPING RATES
00.00 to 20.00 Shipping Charge 8.98
20.01 to 50.00 Shipping Charge 14.55
50.01 to 75.00 Shipping Charge 19.55
75.01 to 100.00 Shipping Charge 20.55
100.01 to 150.00 Shipping Charge 26.55
150.01 to 200.00 Shipping Charge 32.98
200.01 to 300.00 Shipping Charge 38.95
300.01 to 400.00 Shipping Charge 45.98
400.01 to 500.00 Shipping Charge 52.55
500.01 to 600.00 Shipping Charge 59.55
600.01 to 700.00 Shipping Charge 65.95
Over $700.01+ FREE GROUND Shipping!*
* We offer free ground UPS, FedEx, or USPS shipping for orders of Seven Hundred dollars or more (before tax and shipping) in the contiguous 48 states. Free ground shipping does not include overweight and oversize packages or shipments to locations where ground shipping is obviously not possible such as Hawaii. On items and shipping locations that free ground shipping does not apply we will contact you with an additional shipping quote. Free ground shipping is at the point of purchase and cannot be added with other orders in the past or future. Nor does this apply with other coupons or promotions.
When Your Order Arrives: Delivery of merchandise in good condition is the responsibility of the carrier. Should your order arrive in damaged condition, immediately inform a Go Miata customer service representative at 1-840-218-1388. You must make claims for damage during shipping to Go Miata immediately. Keep original box and packing material. If your order was shipped truck freight, note damage on the bill of lading when signing the delivery receipt or open the freight and double check for damages before signing the delivery receipt. If there is any other question about your order, contact customer service the same day.
Installing Accessories: Accessories in general are test fit to a stock vehicle. It is impossible to say for sure that any product will fit a specific combination of accessories/modifications without test fitting them all together. Some vendors provide information about combinations that work or don't work together, but most do not. If you have modifications or other accessories relating to the same part of your vehicle as the accessory you’re about to install, it is recommended that you carefully test fit before final installation. In addition, check for adequate spacing around any moving parts.
Warranty: All products are warranted against defects in material and workmanship by the original equipment manufacturer or Go Miata, for 12 months from the date of shipment.
We will replace the product or refund your purchase price at our discretion.
The warranty does not cover labor, failure of a related component, failure resulting from faulty installation, nor would the liability of Go Miata exceed the cost of the original component.
INTERNATIONAL SHIPPING:
For international orders, customer is fully responsible for all tarrifs and Brokerage charges if applicable.
Free shipping promotions only apply to the contiguous 48 states in the United States Only. Free shipping promotion does not apply to International Customers.
For Immediate processing please post your payment through PAYPAL.
FEES SHOWN ON WEBSITE FOR INTERNATIONAL and out Side of 48 US States ORDERS ARE ESTIMATES ONLY AND CAN VARY GREATLY. If NEEDED, WE WILL CONTACT YOU WITH ACTUAL SHIPPING CHARGES.
Orders out side of the contiguous 48 states will be charged a $5.00 and up, surcharge depending on the size and weight of the order. (Delivery times not guaranteed.)
Web Site Pictures: The picture on our web site may or may not be the exact part you will be receiving. Please make sure you read the description of each part you order.
CANCELLATION / REFUSED SHIPMENTS / ORDERS
Orders cancelled at the customer’s request are subject to charges equal to the costs incurred by Go Miata at the time of cancellation. Shipments returned by a freight carrier as “undeliverable” – refused, non-payment, not in on three delivery attempts, etc. – will result in the customer’s account being “frozen” until all charges due to Go Miata are paid in full. Parts that are “Special Order” items – items not normally stocked by Go Miata require a 100% non-refundable deposit at the time the order is placed. If an order has been processed, there is a $9.99 charge for any request for change in order information.
RETURN / REFUND POLICY
Please fill out the Return authorization Form: Click Here for RA Form
At GoMiata.com we want you to be fully satisfied with your purchase. If for any reason you are not, please contact us when you receive your order. You may return the product for a 100% refund on Non Racing Beat, Non Magan Racing, Non Genuine Mazda Parts, Non Kee, Non Covercraft, Non NRG, Non Nardi, Non MagnaFlow, Non Hard Dog, Non VIS, Non Status and Non Dash Design of the purchase price. (Per Mazda, there is a 25% handling Charge on all GENUINE Mazda returned parts. Returns accepted only in original undamaged cartons. All cores must be returned within 12 days for credit. All exchanges and refund claims must done within 30 days.)
To expedite your returns, we reserve the right to request digital pictures for any return items.
In order to receive a full refund, the merchandise must be in new, resalable condition, and with in 30 days of purchase date. Parts that have been installed cannot be returned. Also, please call to get a return authorization number - No returns can be accepted without one. In most cases, return shipping is the responsibility of the customer. Special orders and custom orders are not returnable. Wheels, tires, and Hard Tops are not returnable.
For International returns and refunds, Go Miata will refund our international customers with the U.S. Dollar amount due to the customer. (Go Miata is Not responsible for currency changes.)
The bottom line: We want you to be happy with your purchase from us. If for whatever reason you are not, please call us and we will do our best to make you a happy and satisfied customer!
|,|||-||OSGIKEN|,|SHOP-BY-TOP-MIATA-BRANDS|,|OS Giken|,||,||,||,||,||,||,||,||,||,||,|||-||OSGIMAMITWCL|,|MIREPA|,|OS Giken Mazda Miata Aluminum Twin-Disc Clutch Kit 1990-2005|,|OSG-MZ061-BC3|,|1,900.00|,|1,629.00|,||,||,|0.000 |,||,||,||,|OS Giken Mazda Miata Aluminum Twin-Disc Clutch Kit 1990-2005
Includes:
* Aluminum cover
* Twin Plate
* Flywheel
* Release sleeve set
Through our research and development of high performance engines, we realized the need for the production of higher quality, more durable clutch systems to meet the rigorous demands of race and sport driving. Our OS multi-plate clutch is able to transmit engine revolutions and output to the drive train without loss. They are made of the highest quality materials and their durability is second to none. Our continual research and development has brought about many improvements since our multi-plate clutch line's original debut in 1983 and we are confident that our clutches can meet the demands of even the most heavily modified vehicles.
In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential.
TS2AD, TS2B, TS2CD and TS3CW are our new OS Racing Clutch series and their friction plates are made of heat treated metal. These materials are carefully selected and alloyed so that the plates match with the materials of the flywheel and center plate to improve durability and maximize performance.
The TS2A and the TS2B are our longest selling models and have established a bulletproof reputation for performance and durability on the racetrack time and again.
The R series are revised versions s of the TS2AS and TS2BD. They are specifically designed for large single turbo charged engines found in many of today's racing cars.
|,|"Soft Diagram Spring" "No" "Yes"|-||-|||-||OSGIMAMISTPL|,|MIREPA|,|OS Giken Mazda Miata Steel Plated Twin-Disc Clutch Kit 1990-2005|,|OSG-MZ061-BC1|,|1,880.00|,|1,659.00|,||,||,|0.000 |,||,||,||,|OS Giken Mazda Miata Steel Plated Twin-Disc Clutch Kit
Includes:
* Steel Plated cover
* Twin Plate
* Flywheel
* Release sleeve set
Through our research and development of high performance engines, we realized the need for the production of higher quality, more durable clutch systems to meet the rigorous demands of race and sport driving. Our OS multi-plate clutch is able to transmit engine revolutions and output to the drive train without loss. They are made of the highest quality materials and their durability is second to none. Our continual research and development has brought about many improvements since our multi-plate clutch line's original debut in 1983 and we are confident that our clutches can meet the demands of even the most heavily modified vehicles.
In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential.
TS2AD, TS2B, TS2CD and TS3CW are our new OS Racing Clutch series and their friction plates are made of heat treated metal. These materials are carefully selected and alloyed so that the plates match with the materials of the flywheel and center plate to improve durability and maximize performance.
The TS2A and the TS2B are our longest selling models and have established a bulletproof reputation for performance and durability on the racetrack time and again.
The R series are revised versions s of the TS2AS and TS2BD. They are specifically designed for large single turbo charged engines found in many of today's racing cars.
|,|"Soft Diagram Spring" "No" "Yes"|-||-|||-||OSGIMAMISUSI1|,|MIREPA|,|OS Giken Mazda Miata Super Single Clutch 1994-2005|,|OSG-MZ061-AB4|,|1,389.99|,|1,290.02|,||,||,|0.000 |,||,||,||,|OS Giken Mazda Miata Super Single Clutch
Our Super Single series make an ideal choice as a replacement to the original equipment clutch/flywheel and provide your vehicle with unparallel response and race performance. The Supersingle clutch design is a product of our cumulative knowledge and experience in developing and refining our Racing Multiplate Clutch line.
Includes:
* Aluminum Cover
* Single Plate w/damper
* Flywheel
* Release sleeve set
For Mazda Miata Years: 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|||-||OSGIMAMISUSI|,|MIREPA|,|OS Giken Mazda Miata Super Single Disc Clutch 1990-1993|,|OSG-MZ061-AB8|,|1,389.99|,|1,290.02|,||,||,|0.000 |,||,||,||,|OS Giken Mazda Miata Super Single Disc Clutch
Our Super Single series make an ideal choice as a replacement to the original equipment clutch/flywheel and provide your vehicle with unparallel response and race performance. The Supersingle clutch design is a product of our cumulative knowledge and experience in developing and refining our Racing Multiplate Clutch line.
Includes:
* Aluminum Cover
* Single Plate w/damper
* Flywheel
* Release sleeve set
For Mazda Miata Years: 1991, 1992 and 1993
|,|||-||OSGIMISULSD|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-1999-2005|,|OS Giken Mazda Miata SuperLock LSD 1994-2005|,|OSG-MZ072-HA|,|1,699.05|,|1,448.00|,||,||,|35.000 |,||,||,||,|OS Giken Mazda Miata SuperLock LSD
Four years of extensive research and development lead to a new and revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the OS Super Lock LSD was born. The increased number of plates directly has not only dramatically improved our LSD design’s locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability.
• A true 100% locking LSD: No movement of internal parts means less heat is generated while in operation and less wear of the friction disks. Less initial torque loss and incredible longevity and durability can be realized. Tested for 35,000km with no signs of wear.
• Straight line stability: During a drag race, our LSD will lock 100% and provide torque equally to each powered wheel. Stable and straight runs will result thus eliminating torque steer in FF applications and lower the chance of driveshaft breakage.
• Customizable: Lock timing can be adjusted by setting the spring inside the pressure ring. Tune the LSD to custom fit any specification and set-up of your desired vehicle and driving style/ skill level for optimum performance. (SPEC-X ONLY)
For Mazda Miata Years: 1994, 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and 2005
|,|||-||OSGMZ091-HA|,|20MAMIDRVIAL|,|OS Giken Mazda Miata SuperLock LSD 2006-2015|,|osgMZ091-HA|,|1,605.00|,|1,448.00|,||,||,|35.000 |,||,||,||,|OS Giken Mazda Miata SuperLock LSD 2006-2015
The OS Super Lock LSD is the culmination of over four years of extensive research and development that led to a revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total). Combined with our patented lock timing system, the Super Lock LSD is able to achieve complete lock in a progressive, smooth, and quiet manner, making it suitable for both street and racing performance.
*Superior Design*
* Miniaturized pressure ring and a superior spline-through-side-gear design allows for fitment of more friction plates (up to 2x as many as competitors versions), offering true 100% lock capability.
* Patented pressure ring design allows for smooth, progressive locking
* LSD case has a relief cut-out for the cone spring, resulting in minimal cone spring degradation and enhanced durability.
*Superior Construction*
* All components are chemically heat treated for maximum durability
* All components are constructed from a high-grade steel alloy
Gears are raw-forged for maximum strength
* Clutch disks are precision-machined simultaneously on both sides to extremely tight tolerances resulting in minimal warpage.
* LSD case is machined from a single billet piece to ensure uniformity.
*Superior Overall Performance*
* The OS LSD standard spec allows for low preload while still retaining a fully progressive 100% lock capability; basically, the vehicle will feel like driving on an open diff in slow turns / street driving, but can still transmit maximum power to the drive wheels under load.
* Operation is ultra quiet, and the progressive locking allows for smooth, predictable locking. Especially when replacing an open diff, equipping OS LSD will completely improve the driving experience while maintaining everyday drivability.
* Due to the precision manufacturing, high-grade materials, and unique design, a break-in period nor rebuild is required for OS Giken LSD’s. OS LSD is purposefully over-engineered to offer the best performing, most durable clutch-type LSD available.
* Aside from the performance advantage and stock-like feel at slow speeds, vehicles equipped with OS LSD are more stable in all road/weather conditions, allowing for a safer driving experience.
*Tunability*
* Initial torque can be adjusted by using thicker / thinner cone springs
* Lock progression timing can be adjusted by using stiffer / weaker pressure ring springs, allowing the progression of full lock to be fine-tuned to the vehicle/driver.
* Ramp angles can be customized by swapping the pressure ring and iron cross for even more tuning possibilities.
* TCD spec disks can be installed for increased oil cooling and even smoother operation.
*Super Lock LSD – Spec X*
For vehicles that are heavily modified or are particpating in specific forms of motorsports, we offer the Spec-X LSD. The custom order Spec-X is available in 1-way, 1.5-way, and 2-way configurations and can be made with custom cam angles, lock timing, and initial torque settings.
*Traction Control Differential (TCD)*
The innovative TCD system uses specialized oil channels and pathways to provide maximum oil flow and minimal noise, resulting in exceptionally smooth locking.
|,|||-||OSGIMAMISULS|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-1999-2005|,|OS Giken MazdaSpeed Miata SuperLock LSD 2004-2005|,|OSG-HA091-HA|,|1,599.95|,|1,448.00|,||,||,|35.000 |,||,||,||,|OS Giken MazdaSpeed Miata SuperLock LSD
Four years of extensive research and development lead to a new and revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the OS Super Lock LSD was born. The increased number of plates directly has not only dramatically improved our LSD design’s locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability.
• A true 100% locking LSD: No movement of internal parts means less heat is generated while in operation and less wear of the friction disks. Less initial torque loss and incredible longevity and durability can be realized. Tested for 35,000km with no signs of wear.
• Straight line stability: During a drag race, our LSD will lock 100% and provide torque equally to each powered wheel. Stable and straight runs will result thus eliminating torque steer in FF applications and lower the chance of driveshaft breakage.
• Customizable: Lock timing can be adjusted by setting the spring inside the pressure ring. Tune the LSD to custom fit any specification and set-up of your desired vehicle and driving style/ skill level for optimum performance. (SPEC-X ONLY)
For MazdaSpeed years only: 2004 and 2005
|,|||-||PABAINFORROR|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Packed Baffle Insert for RoadsterSport RACE only 2006-2015|,|GWR-601325|,|55.00|,|49.00|,||,||,|0.000 |,||,||,||,|Packed Baffle Insert for RoadsterSport RACE only 2006-2015
Glass Packed baffle insert for RoadsterSport RACE Muffler only! About 8 inches long and acts like a small additional muffler that slides into the tip of our 2006-2012 RoadsterSport RACE muffler. All stainless steel construction for years of driving pleasure. This is for folks that want to bring the sound DOWN for longer trips, etc. Uses simple retaining screw to hold in place and to enable easy replacement (remember to oil those threads every time you want to pull it out). Does NOT work on other mufflers.
|,|"Drop-ship fee" "add (+$9)"|-||-|||-||60-1325ND|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Packed Baffle Insert for RoadsterSport SINGLE TIPS. 2016-2020|,|60-1325ND|,|55.00|,|49.00|,||,||,||,||,||,||,|Packed Baffle Insert for RoadsterSport SINGLE TIPS. 2016-2020
Glass Packed baffle insert for RoadsterSport SINGLE TIP Mufflers. Intended for single tip SuperQ, the RoadsterSport Race, and the RoadsterSport StreetSport single tip.
About 6 inches long and acts like a small additional muffler that slides into the tip. All stainless steel construction for years of driving pleasure.
This is for folks that want to bring the sound DOWN for longer trips, etc. Uses simple retaining screw to hold in place and to enable easy replacement (remember to oil those threads every time you want to pull it out). Does NOT work on other mufflers.
|,|"Drop-ship fee" "add (+$9)"|-||-|||-||60-1325SSTT|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Packed Blocking Baffle Insert for RoadsterSport SuperStreet Twin Tip 2016-2020|,|60-1325SSTT|,|55.00|,|49.00|,||,||,||,||,||,||,|Packed Blocking Baffle Insert for RoadsterSport SuperStreet Twin Tip 2016-2020
|,|"Drop-ship fee" "add (+$9)"|-||-|||-||PAPE|,||,|Parts & Performance|,||,||,||,||,||,||,||,||,||,||,|||-||PARTSSQUAD|,|DONTMISS|,|PARTS SQUAD|,||,||,||,||,||,||,||,||,|http://lib.store.yahoo.net/lib/gomiata/PSBRAKESICON
http://lib.store.yahoo.net/lib/gomiata/PSgenuinepartslogo
http://lib.store.yahoo.net/lib/gomiata/Untitled18copy.jpg
http://lib.store.yahoo.net/lib/gomiata/PSEXTRABIGTESTINGcopy.jpg
|,|
 
Welcome to Parts Squad
Parts Squad has been formed out of the many request from our customers to find them Genuine OEM items that we do not currently offer on our website. Due to our extensive history working with Mazda we can work with them and find any item that is currently still in production. Once we find the item for our customer we add it to our website in order to help future Miata enthusiasts find the items they need to complete a project. So if you cannot find a Genuine Mazda OEM item on our website (or even anyone else’s) give us a call and we would be glad to track that item down for you.
Genuine Mazda Miata Parts Info
 Genuine Mazda Miata Brakes make sure you stop smoothly. Designed for specific Mazda models, we ensure that they're the highest quality brakes available.
Learn More
 Imitation is not always the best form of flattery, or the best for your Mazda. For unsurpassed quality, fit, finish, appearance, corrosion resistance, safety and warranty coverage, remember to order Genuine Mazda Parts whenever the need arises
|  |
Parts Squad Hours:
Monday-Friday
10am-4pm PST
Call:
1-619-466-4282 (Direct Line)
Or Email:
PartsSquad@GoMiata.com
|
|,|||-||CRPERFORMANCE|,|SHOP-BY-TOP-MIATA-BRANDS|,|PERFORMANCE MIATA|,||,||,||,|
|,||,||,||,||,||,|
|,|||-||PEPA94|,||,|Performance Package 94-97|,|pepa94|,||,||,||,||,||,||,|cvncvn|,||,|Have you been wondering about the best way to increase the performance of your Miata? Well, wonder no more! Thanks to the suggestions from customers like you, we have put together Packages that we feel work great together and save you money over buying each item seperately! We have done this in all of our categories, so look for the Black Miata with the "Package Deal" text!
Our GoMiata Performance Package comes in 3 Stages...from mild to wild!
See below for the packages available:
|,|||-||PEPA99|,||,|Performance Package 99+|,|pepa99|,||,||,||,||,||,||,|sdgas|,||,|Have you been wondering about the best way to increase the performance of your Miata? Well, wonder no more! Thanks to the suggestions from customers like you, we have put together Packages that we feel work great together and save you money over buying each item seperately! We have done this in all of our categories, so look for the Black Miata with the "Package Deal" text!
Our GoMiata Performance Package comes in 3 Stages...from mild to wild!
See below for the packages available:
|,|||-||PESHBOBLLE|,|20MAMIINBO|,|Personal Shift Boot - Black Leather|,|NARDI-3601-01-0000|,|125.00|,|103.05|,||,||,|0.000 |,||,||,||,|Personal Shift Boot - Black Leather - Part # 3601.01.0000
• Brand new in factory box.
• Made in Italy.
• Universal fit. Fits most shift knobs and vehicles.
• This boot is about 216mm (8.50 inches) Tall.
• Embossed "Personal" Logo
Fits Fits most vehicles and most shift knobs. Contact us to verify fit.
Quantity 1 Leather Shifter Boot
Color - Finish Black Leather - Silver Thread - Embossed "Personal" Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNANBLLE|,|20MAMIINKN|,|Personal Shift Knob - Anatomic - Black Leather - Red & Yellow Leather insert|,|PSL-3102-90-0000|,|135.00|,|109.05|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Anatomic - Black Leather - Red & Yellow Leather insert - Part # 3102.90.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Black Leather - Red & Yellow Leather insert
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNANPOMA|,|20MAMIINKN|,|Personal Shift Knob - Anatomic - Polished Mahogany Wood|,|PSL-3090-50-0000|,|135.00|,|119.95|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Anatomic - Polished Mahogany Wood - Part # 3090.50.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Polished Mahogany Wood
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNBABLLE|,|20MAMIINKN|,|Personal Shift Knob - Ball - Blue Leather|,|PSL-3192-03-0000|,|135.00|,|109.05|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Ball - Blue Leather - Part # 3192.03.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Blue Leather
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNBACAFI|,|20MAMIINKN|,|Personal Shift Knob - Ball - Carbon Fiber Look|,|PSL-3190-55-0000|,|145.00|,|109.95|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Ball - Carbon Fiber Look - Part # 3190.55.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Carbon Fiber Look
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNBAINSI|,|20MAMIINKN|,|Personal Shift Knob - Ball - Inox Silver Leather|,|PSL-3192-13-0000|,|125.00|,|104.05|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Ball - Inox Silver Leather - Part # 3192.13.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Inox Silver Leather
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNBAPOAL|,|20MAMIINKN|,|Personal Shift Knob - Ball - Polished Aluminum|,|PSL-3194-12-0000|,|125.00|,|97.95|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Ball - Polished Aluminum - Part # 3194.12.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Polished Aluminum
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNBAREDL|,|20MAMIINKN|,|Personal Shift Knob - Ball - Red Leather|,|PSL-3192-11-0000|,|125.00|,|104.05|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Ball - Red Leather - Part # 3192.11.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Red Leather
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNDRBLLE|,|20MAMIINKN|,|Personal Shift Knob - Drop - Black Leather|,|PSL-3182-01-0000|,|125.00|,|109.05|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Drop - Black Leather - Part # 3182.01.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Black Leather
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNDRCAFI|,|20MAMIINKN|,|Personal Shift Knob - Drop - Carbon Fiber Look|,|PSL-3180-55-0000|,|145.00|,|107.95|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Drop - Carbon Fiber Look - Part # 3180.55.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Carbon Fiber Look
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESHKNSHBBLL|,|20MAMIINKN|,|Personal Shift Knob - Short (BRIO) - Black Leather|,|PSL-3142-01-0000|,|125.00|,|109.05|,||,||,|0.000 |,||,||,||,|Personal Shift Knob - Short (BRIO) - Black Leather - Part # 3142.01.0000
• Brand new in factory box with all hardware.
• Installs with set screws for the most secure installation available. Set screws included. This knob also has different size bushings included, to insure a perfect fit on almost any vehicle!
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal, is widely known for its established reputation as a steering wheel & shift knob manufacturer of the highest quality. With a history that spans over 70 years, Nardi-Personal has been supplying their brand products not only to the world's leading automakers but also to racing enthusiasts worldwide. The company has made considerable investments in past and recent years to consolidate itself with a reputation second to none. Nardi-Personal designers and engineers collaborate using state-of-the-art technology, to ensure optimized ergonomics, comfort and reliability. Yet the level of craftsmanship involved in the manufacturing process is still, in fact, very much a traditional process where every steering wheel is assembled and finished by highly skilled artisans.
Fits Fits most 4, 5, or 6 speed manual shift vehicles, and automatic vehicles without factory button, with a 16 mm (0.63 inch) or less shaft diameter.. Contact us to verify fit.
Quantity 1 Shifter Knob
Color - Finish Black Leather
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHBL330M|,|NBINSTWH|,|Personal Steering Wheel - Blitz - 330 mm (12.99 inch) - Black Polyurethane|,|PSL-8474-32-2001|,|345.85|,|232.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Blitz - 330 mm (12.99 inch) - Black Polyurethane - Part # 8474.32.2001
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Polyurethane - Black Spokes - Yellow Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHBL350M|,|NBINSTWH|,|Personal Steering Wheel - Blitz - 350 mm (13.78 inch) - Black Polyurethane|,|PSL-8474-34-2001|,|345.85|,|254.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Blitz - 350 mm (13.78 inch) - Black Polyurethane - Part # 8474.34.2001
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Polyurethane - Black Spokes - Yellow Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHFIE335|,|NBINSTWH|,|Personal Steering Wheel - Fitti E3 - 350 mm (13.78 inch) - Black Leather|,|PSL-6408-35-2071|,|498.98|,|386.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Fitti E3 - 350 mm (13.78 inch) - Black Leather - Part # 6408.35.2071
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button (where applicable).
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Spokes - White Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHFORA27|,|NBINSTWH|,|Personal Steering Wheel - Formula Racing - 270 mm (10.63 inch) - Black Suede Leather - Undrilled|,|PSL-6417-27-2081|,|515.95|,|393.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Formula Racing - 270 mm (10.63 inch) - Black Suede Leather - Undrilled - Part #6417.27.2081
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
* For Racing use only
Fits Fits most vehicles. 270 mm (10.63 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Suede Leather - Black Spokes - Yellow Stitching
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHFORA29|,|NBINSTWH|,|Personal Steering Wheel - Formula Racing - 290 mm (11.42 inch) - Black Suede Leather - Undrilled|,|PSL-6417-29-2081|,|545.95|,|414.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Formula Racing - 290 mm (11.42 inch) - Black Suede Leather - Undrilled - Part # 6417.29.2081
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
* For Racing use only
Fits Fits most vehicles. 290 mm (11.42 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Suede Leather - Black Spokes - Yellow Stitching
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHFORA32|,|NBINSTWH|,|Personal Steering Wheel - Formula Racing - 320 mm (12.60 inch) - Black Suede Leather - Undrilled|,|PSL-6417-32-2081|,|515.95|,|384.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Formula Racing - 320 mm (12.60 inch) - Black Suede Leather- Undrilled - Part # 6417.32.2081
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
* For Racing use only
Fits Fits most vehicles. 320 mm (12.60 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Suede Leather - Black Spokes - Yellow Stitching
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHGR330M1|,|NBINSTWH|,|Personal Steering Wheel - Grinta - 330 mm (12.99 inch) - Black Leather - Red Stitching|,|PSL-6430-33-2096|,|475.95|,|404.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Grinta - 330 mm (12.99 inch) - Black Leather - Red Stitching - Part # 6430.33.2096
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Red Stitching - Red Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHGR330M2|,|NBINSTWH|,|Personal Steering Wheel - Grinta - 330 mm (12.99 inch) - Black Leather - Yellow Stitching|,|PSL-6430-33-2095|,|455.95|,|342.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Grinta - 330 mm (12.99 inch) - Black Leather - Yellow Stitching - Part # 6430.33.2095
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Yellow Stitching - Yellow Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHGR330M|,|NBINSTWH|,|Personal Steering Wheel - Grinta - 330 mm (12.99 inch) - Black Suede Leather - Yellow Stitching|,|PSL-6430-33-2092|,|405.95|,|340.99|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Grinta - 330 mm (12.99 inch) - Black Suede Leather - Yellow Stitching - Part # 6430.33.2092
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Suede Leather - Yellow Stitching - Black Spokes - Yellow Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHGR350M2|,|NBINSTWH|,|Personal Steering Wheel - Grinta - 350 mm (13.78 inch) - Black Leather - Red Stitching|,|PSL-6430-35-2096|,|529.71|,|414.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Grinta - 350 mm (13.78 inch) - Black Leather - Red Stitching - Part # 6430.35.2096
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Red Stitching - Black Spokes - Red Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHGR350M3|,|NBINSTWH|,|Personal Steering Wheel - Grinta - 350 mm (13.78 inch) - Black Leather - Yellow Stitching|,|PSL-6430-35-2095|,|465.95|,|342.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Grinta - 350 mm (13.78 inch) - Black Leather - Yellow Stitching - Part # 6430.35.2095
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Yellow Stitching
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHGR350M1|,|NBINSTWH|,|Personal Steering Wheel - Grinta - 350 mm (13.78 inch) - Black Polyurethane|,|PSL-8430-35-2001|,|385.85|,|355.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Grinta - 350 mm (13.78 inch) - Black Polyurethane - Part # 8430.35.2001
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Polyurethane - Black Spokes - Yellow Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHGR350M|,|NBINSTWH|,|Personal Steering Wheel - Grinta - 350 mm (13.78 inch) - Black Suede Leather - Yellow Stitching|,|PSL-6430-35-2092|,|365.95|,|340.99|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Grinta - 350 mm (13.78 inch) - Black Suede Leather - Yellow Stitching - Part # 6430.35.2092
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Suede Leather - Yellow Stitching - Black Spokes - Yellow Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHLE365M|,|NBINSTWH|,|Personal Steering Wheel - Lesmo - 365 mm (14.37 inch) - Carbon Look - Leather inserts|,|PSL-5467-36-3000|,|1,024.00|,|895.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Lesmo - 365 mm (14.37 inch) - Carbon Look - Leather inserts - Part # 5467.36.3000
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 365 mm (14.37 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Carbon Look - Perforated Leather inserts - Aluminum Tinted Center Pad
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHNEOAC3|,|NBINSTWH|,|Personal Steering Wheel - Neo Actis - 350 mm (13.78 inch) - Black Leather|,|PSL-6498-34-2090|,|443.83|,|323.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Neo Actis - 350 mm (13.78 inch) - Black Leather - Part # 6498.34.2090
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Spokes - Yellow Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHNEOEA3|,|NBINSTWH|,|Personal Steering Wheel - Neo Eagle - 350 mm (13.78 inch) - Black Leather|,|PSL-6499-34-2090|,|393.83|,|329.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Neo Eagle - 350 mm (13.78 inch) - Black Leather - Part # 6499.34.2090
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Spokes - Blue Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHNEOGR31|,|NBINSTWH|,|Personal Steering Wheel - Neo Grinta - 330 mm (12.99 inch) - Black Leather|,|PSL-6497-33-2090|,|443.83|,|329.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Neo Grinta - 330 mm (12.99 inch) - Black Leather - Part # 6497.33.2090
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 330 mm (12.99 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather with Black Spokes - Red Stitching and Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHNEOGR3|,|NBINSTWH|,|Personal Steering Wheel - Neo Grinta - 350 mm (13.78 inch) - Black Leather|,|PSL-6497-35-2090|,|453.83|,|339.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Neo Grinta - 350 mm (13.78 inch) - Black Leather - Part # 6497.35.2090
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Spokes - Red Logo
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHPOPO351|,||,|Personal Steering Wheel - Pole Position - 350 mm (13.78 inch) - Black Leather - Inox Silver Leather insert|,|newitem214607383|,||,||,||,||,||,||,||,||,||,|||-||PESTWHPOPO35|,|NBINSTWH|,|Personal Steering Wheel - Pole Position - 350 mm (13.78 inch) - Black Leather - Inox Silver Leather insert|,|PSL-6521-35-2013|,|441.36|,|334.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Pole Position - 350 mm (13.78 inch) - Black Leather - Inox Silver Leather insert - Part # 6521.35.2013
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Inox Silver Leather insert - Silver Logo - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHTH350M|,|NBINSTWH|,|Personal Steering Wheel - Thunder - 350 mm (13.78 inch) - Black Leather|,|PSL-6520-35-2071|,|498.40|,|372.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Thunder - 350 mm (13.78 inch) - Black Leather - Part # 6520.35.2071
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Perforated Leather inserts - Black Spokes
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|||-||PESTWHTR350M|,|NBINSTWH|,|Personal Steering Wheel - Trophy - 350 mm (13.78 inch) - Black |,|PSL-6518-35-2071|,|447.12|,|342.02|,||,||,|0.000 |,||,||,||,|Personal Steering Wheel - Trophy - 350 mm (13.78 inch) - Black Leather - Part # 6518.35.2071
• 52 mm (2.05 inch) Deep Dish
• Brand new in factory box with all hardware.
• Made in Italy from the finest Italian Leather and high grade aircraft quality aluminum.
• Installs with a Nardi-Personal steering wheel adapter [ hub ] which can be bought separately from our store. All the instructions and hardware are included with this product, including the horn button.
• Nardi-Personal was the first company in the world to understand the effective contribution steering wheel design could make to car control. While leading the way with their refined tasteful styling, they continue to innovate, delivering steering wheels that meet the highest of driver demands.
Fits Fits most vehicles. 350 mm (13.78 inches) in diameter. Contact us to verify fit.
Quantity 1 Steering Wheel
Color - Finish Black Leather - Black Spokes - Yellow Stripe
Condition Brand new and still in the factory box
Warranty We are an authorized dealer, so we can give you the full factory warranty and great customer service.
|,|"Select Material" "Select Here" "Black Suede Leather" "Black Leather add(+$55)"|-||-|||-||PIAA|,|SHOP-BY-TOP-MIATA-BRANDS|,|PIAA|,||,||,||,||,||,||,||,||,||,||,|||-||PLANTED-DRIVER-SEAT-BRACKET-MAZDA-MIATA-06-11-|,|STATUS-RACING-SEAT-3|,|Planted Driver Seat Bracket Mazda Miata 06-11 |,|SB110DR|,|285.00|,|225.00|,||,||,|0.000 |,||,||,||,|Planted Driver Seat Bracket Mazda Miata 06-11
The Planted seat brackets are made with 3/16" thick steel for superior strength. Extra material is provided for direct seat or side mount applications where eliminating sliders is preferred.
Finished with a black powder coat, many applications are available for most cars. If you dont see your car listed in the applications section please contact Status Racing.
3/16" Steel, Black powder coating
Fits Planted Ring and Ring GT seats only
Extra material provided to eliminate seat slider
Seat Sliders NOT included
Works with Planted Sliders and Side Mounts only
|,|||-||PLANTED-PASSENGER-SEAT-BRACKET-MAZDA-MIATA-06-11-|,|STATUS-RACING-SEAT-3|,|Planted Passenger Seat Bracket Mazda Miata 06-11 |,|SB110PA|,|285.00|,|225.00|,||,||,|0.000 |,||,||,||,|Planted Passenger Seat Bracket Mazda Miata 06-11
The Planted seat brackets are made with 3/16" thick steel for superior strength. Extra material is provided for direct seat or side mount applications where eliminating sliders is preferred.
Finished with a black powder coat, many applications are available for most cars. If you dont see your car listed in the applications section please contact Status Racing.
3/16" Steel, Black powder coating
Fits Planted Ring and Ring GT seats only
Extra material provided to eliminate seat slider
Seat Sliders NOT included
Works with Planted Sliders and Side Mounts only
|,|||-||POMICUBIGR201|,|NBBODYSTYLING|,|Polished Miata Curved Billet Grill 2001-2005|,|501-139|,|139.99|,|129.95|,||,||,|0.000 |,||,||,||,|
This polished billet aluminum grill provides a clean beautiful look to the front of your Miata. After removing tie-down hooks, this grill installs with a very simple 2 bolt installation, with no holes to drill.
This Billet Grill is also compatible with MAZDASPEED.
|,|||-||POMICUBIGR20|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Polished Miata Curved Billet Grill 2006-2008|,|501-140|,|139.99|,|109.95|,||,||,|0.000 |,||,||,||,|This polished billet aluminum grill provides a clean beautiful look to the front of your Miata. After removing tie-down hooks, this grill installs with a very simple 2 bolt installation, with no holes to drill.
|,|||-||910-415|,|20MAMISUANDS5|,|Polyurethane Rear Differential Carrier Bushing by Energy Suspension 2006-2015|,|910-415|,|65.99|,|48.05|,||,||,||,||,||,||,|Polyurethane Rear Differential Carrier Bushing by Energy Suspension 2006-2015
OEM rubber bushings break down with age, which makes your suspension feel sloppy. Switching to polyurethane bushings will not only get rid of that sloppiness but offer a more precision and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane will not only make your Miata handle better but you will never have to replace these bushings again as Energy Suspension's Hyper-Flex polyurethane will not break down like rubber bushings. Energy Suspension's Hyper-Flex polyurethane formulation is unique and so highly advanced that it has been awarded nine U.S Patents. Comes with installation instructions.
|,|||-||910-413|,|20MAMISUANDS5|,|Polyurethane Sway Bar Bushings by Energy Suspension - Front 2006-2015|,|910-413|,|29.95|,|19.10|,||,||,||,||,||,||,|Polyurethane Sway Bar Bushings by Energy Suspension - Front 2006-2015
OEM rubber bushings break down with age, which makes your suspension feel sloppy. Switching to polyurethane bushings will not only get rid of that sloppiness but offer a more precision and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane will not only make your Miata handle better but you will never have to replace these bushings again as Energy Suspension's Hyper-Flex polyurethane will not break down like rubber bushings. Energy Suspension's Hyper-Flex polyurethane formulation is unique and so highly advanced that it has been awarded nine U.S Patents. Comes with installation instructions.
|,|||-||910-414|,|20MAMISUANDS5|,|Polyurethane Sway Bar Bushings by Energy Suspension - Rear 2006-2015|,|910-414|,|29.95|,|19.10|,||,||,||,||,||,||,|Polyurethane Sway Bar Bushings by Energy Suspension - Rear 2006-2015
OEM rubber bushings break down with age, which makes your suspension feel sloppy. Switching to polyurethane bushings will not only get rid of that sloppiness but offer a more precision and consistent handling with less deflection and no pre-loading. Upgrading to polyurethane will not only make your Miata handle better but you will never have to replace these bushings again as Energy Suspension's Hyper-Flex polyurethane will not break down like rubber bushings. Energy Suspension's Hyper-Flex polyurethane formulation is unique and so highly advanced that it has been awarded nine U.S Patents. Comes with installation instructions.
|,|||-||7210|,||,|Pontiac Firebird Convertible Top with Heated Glass Window 1994-2002|,||,||,||,||,||,||,||,||,||,||,|||-||56477|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Power Pulse MX-5 Exhaust MX-5 - Brembo Equipped with Rear Diffuser 2016-2024|,|56477|,|599.05|,|554.00|,||,||,||,||,||,||,|Power Pulse MX-5 Exhaust MX-5 - Brembo Equipped with Rear Diffuser 2016-2024+
Racing Beat Power Pulse Exhaust - 2016-19 MX-5 ND
(Brembo/Appearance Package equipped models)
The Racing Beat Power Pulse Exhaust for the MX-5 ND offers an exciting opportunity to experience the joys of the classic open-air driving experience. For over 25 years Racing Beat has been developing sport-tuned exhaust systems for the Miata/MX-5 application. Racing Beat exhaust components have been recognized by the aftermarket community as high-quality, great sounding, and beautifully-crafted performance upgrades for the Miata. Many of Racing Beat's exhaust components have debuted on Mazda's SEMA Show vehicles, making a statement to Racing Beat's name as a provider of high-quality and proven products.
Revised Sound Tuning
As with many new applications, we'll continue to refine and tune our exhaust systems in an attempt improve both sound quality and performance.Our current version has been further tuned to produce improved sound quality through a revised muffler design - without sacrificing performance. After reading reviews of other aftermarket systems that featured unique external resonance chamber designs, we obtained and tested these systems and noted (per db meter testing) that they actually produced a noticeably louder exhaust tone as compared with stock, especially at high RPMs. Our revised muffler cannister design better moderates high RPM "boominess" and tone quality, providing an aggressive tone without introducing annoying exhaust drone or buzzy tones.
Produced in Racing Beat's California manufacturing facility, the Power Pulse Exhaust features a MX-5 designed crimped-edge 304-stainless steel muffler canister, stainless steel inlet and outlet tubing, dual single-wall stainless steel tips with etched Racing Beat logos, hangers, and connecting flange. The muffler canister features a dyno-tested internal chamber design that provides excellent exhaust gas flow and includes a combination of stainless steel and high-temperature ceramic wool packing material for sound absorption. Racing Beat incorporates a Mazda-OE mounting flange on the inlet end of the exhaust to securely capture, retain and seal the Mazda donut-shaped swivel gasket. The stock mounting studs and retaining springs are retained for use with Racing Beat exhaust.
Weight Comparison
Stock system = 20.5 lbs
Racing Beat Power Pulse Muffler = 19 lbs
Hanger Assemblies – Keeping it Light
In keeping with the emphasis on the lightweight aspect of the MX-5 ND design principles, Racing Beat adopted a unique approach to the development of the extensive hanger assemblies that were required for this muffler. The ½” OD hangers on the stock MX-5 muffler posed an interesting challenge, if we used ½” OD hanger rod material for the Racing Beat hangers, these hanger assemblies would prove to be unnecessarily heavy. As an alternative, we used lighter 1/4" and 5/16” OD rod material for the lengthy hanger assemblies, and designed a unique ½” OD forged end hanger, which we then mated to the outlet end of each hanger assembly. The design of this hanger end ensures a secure "no slip" attachment with the stock rubber muffler hangers to prevent lateral movement of the exhaust during hard cornering.
|,|"Shipping & Handling" "add(+$98)"|-||-|||-||POWERFLEX-HIGH-TEMP-POLYURETHANE-EXHAUST-HANGER|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|PowerFlex High Temp POLYURETHANE Exhaust Hanger 2016-2019|,|60-1095ND|,|24.99|,|19.95|,||,||,||,||,||,||,|PowerFlex High Temp POLYURETHANE Exhaust Hanger 2016-2019
Factory exhaust hangers are made from a rubber compound containing natural products, which deteriorates with age.
These PowerFlex EXH-005 Polyurethane bushings on the other hand are 25%-30% stiffer and do not deteriorate in performance over time. The benefit of the increased stiffness is superior control of the exhaust...preventing knocks that might otherwise occur with your stock hangers. Sold individually. Use a bit of lube on these to slide them on and keep some lube on them (unlike rubber these need some lube or you risk tearing them).
*** Product images may differ from actual product appearance ***
|,|||-||PRMIAL|,|MAZDA-MX-5-MIATA-AUDIO-AND-VIDEO-PARTS-AND-ACCESSORIES-2016|,|Prestige Miata Alarm|,|PSL-APS25CH|,|129.95|,|79.95|,||,||,|0.000 |,||,||,||,|Prestige Miata APS25CH Alarm
* Security system with shock sensor and starter disable.
* Two button code hopping transmitters.
* Starter disable relay.
* Six tone siren.
* Dual stage shock sensor.
* Parking light flash.
* Seven function red LED.
* Three channel receivers.
* Keyless entry and trunk release outputs.
* Dual vehicle operation.
|,|||-||PRIVACYPOLICY1|,||,|PRIVACY POLICY|,||,||,||,||,||,||,||,|asdgdsg|,||,|
At GoMiata, your privacy is of utmost importance. Therefore, our privacy policy is very simple:
We do not share ANY of your personal information with anyone.
Our Site Guarantee protects you while you shop at GoMiata.com, so that you never have to worry about credit card safety.
We guarantee that every transaction you make at GoMiata.com will be 100% safe. This means you pay nothing if unauthorized charges are made to your card as a result of shopping with us. We use secure server software (SSL), the industry standard and among the best software available today for secure commerce transactions. It encrypts all of your personal information, including credit card number, name, and address, so that it cannot be read as the information travels over the Internet. SSL works with Netscape Navigator (versions 2.0 and above), Microsoft Internet Explorer (version 3.0 and above), and AOL (AOL 3.0 and above).
Third-Party Web Beacons: We use third-party web beacons from Yahoo! to help analyze where visitors go and what they do while visiting our website. Yahoo! may also use anonymous information about your visits to this and other websites in order to improve its products and services and provide advertisements about goods and services of interest to you. If you would like more information about this practice and to know your choices about not having this information used by Yahoo!, click here.
|,|||-||MAZDA-MX-5-MIATA-PROJECT-G|,|SHOP-BY-TOP-MIATA-BRANDS|,|Project-G|,||,||,||,||,||,||,||,||,||,||,|||-||QUACSCRE|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Quixx Acrylic Scratch Remover - SALE!!!|,|818-601|,|24.99|,|14.95|,||,||,|0.000 |,||,||,||,|
Quixx Acrylic Scratch Remover
COMPLETELY REMOVES SMALL, BIG AND EVEN DEEP SCRATCHES FROM
ACRYLIC GLASS AND PLEXIGLAS ®
* Restores acrylic surfaces with professional results
* Certified, proven effectiveness
* Quick and simple to use
* Environmentally friendly - 0% VOC
Made in Germany
|,|||-||QUHIPO|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Quixx High-Performance Polish|,|818-602|,|29.99|,|19.95|,||,||,|0.000 |,||,||,||,|
3 IN 1 CARE SYSTEM: CLEANS, POLISHES AND PROTECTS IN A SINGLE PASS
* 3 in 1: cleans, polishes and protects
* Rust protection formula
* Suitable for all paint types and conditions
* Concentrated formula
* Smart Pump offers economical, precise dispensing
Removes minor swirl marks and other slight imperfections from car paint
* Restores beautiful luster to old, dull paint
Made in Germany
|,|||-||QUHIWAX|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Quixx High-Performance Wax|,|818-603|,|29.99|,|19.95|,||,||,|0.000 |,||,||,||,|
HIGH TECH FORMULA PROVIDES LONG TERM PAINT PROTECTION FROM RUST, UV RAYS, AND NATURE'S ELEMENTS
* Long-lasting protection
* Rust protection formula
* Reflective high gloss
* Concentrated formula uses less product per application
* Smart Pump offers economical, precise dispensing
Made in Germany
|,|||-||QUSCREKIT|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Quixx Scratch Remover Kit - On Sale!|,|818-600|,|29.99|,|19.95|,||,||,|0.000 |,||,||,||,|
GREAT NEWS! Quixx is finally available in the USA for the 1st Time.
Consumer Reports has just completed a test of scratch removers on the market today featured in the September 2007 issue of Consumer Reports magazine. QUIXX not only Won the category dramatically, but Consumer Reports went so far as to say that QUIXX was the Only scratch remover able to remove scratches deep enough to feel with your fingernail.
QUIXX Scratch Remover was rated EXCELLENT (a 90 Test score) with the next closest competitor rated a disappointing 76. Consumer Reports also mentioned that some of the competing brands caused the paint to haze.
Removes scratches and marks from ALL paint finishes on cars (including Mazda Miata's), motorcycles, caravans and boats. Unattractive scratches on paintwork of vehicles cars are unavoidable over time. QUIXX Scratch Remover removes scratches, small marks and scuffs quickly and reliably from all colors of paint and all types finishes including metallics...
NO POWER TOOLS ARE NEEDED
QUIXX Scratch Remover Kit's are now available in limited availability.
|,|||-||RACTYPPADADR|,||,|Race Type Padding - Additional Rolls|,|HDG-FPAD|,|7.50|,|5.00|,||,||,|0.000 |,||,||,||,||,|"Select Color" Black Red|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-RACING-BEAT|,|SHOP-BY-TOP-MIATA-BRANDS|,|RACING BEAT|,||,||,||,|MAZDA MX-5 MIATA RACING BEAT PARTS AND ACCESSORIES|,||,||,||,||,||,||,|||-||RABESPCOPI19|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Racing Beat Mazda Miata Sport Connecting Pipe 1990-1995|,|56435|,|249.99|,|185.00|,||,||,|10.000 |,||,||,||,|Mazda Miata Racing Beat Sport Connecting Pipe for years 1990-1995 Miatas
The Sport Connecting pipe was originally designed to accompany our older style, “reverse-flow” Sport Mufflers. We have since discontinued the line of Sport Mufflers, but many customers have requested the connecting pipe that was sold with these systems. For those of you that would like a “louder” and lighter exhaust system, the Sport Connecting Pipe can be used with our Power Pulse Muffler. Unlike the connecting pipe that that is intended to accompany the Power Pulse Muffler, the Sport Connecting Pipe is NOT equipped with a presilencer. Produced from 2.375" OD 304-stainless steel tubing and flanges, this connecting pipe will offer years of performance driving.
Many people ask just how much louder the Sport Pipe is as compared to the Power Pulse Pipe. For comparison purposes, we undertook a series of decibel readings to record the sound level outputs.
Test Parameter
We used our 1990 RB Miata (1.6 ltr) in this test. The car is equipped with a RB High Flow Intake, 4:1 Header, and Power Pulse muffler. The different connecting pipes were installed and the car was lowered to the ground prior to testing. Using a handheld decibel meter, a sound level measurement was taken at a 45 degree angle, approximately 18” away from the muffler tip, The measurements are as follows:
Power Pulse Pipe (with presilencer)
Idle: 74db
3000 RPM: 82 db
5000 RPM: 87 db
Sport Pipe (without presilencer)
Idle: 75db
3000 RPM: 89 db
5000 RPM: 92 db
(Legal limit for California is 95 db.)
Next, the Racing Beat sales staff drove the car to obtain subjective opinions on the sound quality of the Sport Pipe configured exhaust.
Evaluation:
We were quite surprised with the sound output of this Sport Pipe! Quite frankly we were expecting to hear a harsh, buzzy tone without a presilencer, but this was not the case. Although the sound seemed to increase sharply at 3000 RPM, it was NOT harsh or buzzy but retained the deep, throaty tone that was similar to the resonated connecting pipe. Even though it was louder, we all agreed that the sound was “streetable” and still retained the sound quality of the Power Pulse system.
Conclusion:
A lighter weight alternative to the resonated connecting pipe, the Sport Pipe offers a modest sound level increase over the Power Pulse Pipe, but in our opinion this pipe is adequate for street or track use.
Made in the USA
|,|"Shipping Cost" "add (+$79)"|-||-|||-||RABEMIACOILC|,||,|Racing Beat AC & Oil Cooler Screens Package Set|,|157-400|,|178.00|,|139.00|,||,||,|0.000 |,||,||,||,|Take advantage of this special website deal and order BOTH the air conditioning condenser and oil cooler protective screens at a reduced package price. Buy now and save 10% over the individual parts price.
Provide your RX-8 2004-2011 with maximum protection against road damage to these critical components with a set of Racing Beat protective screens. Produced from 304-grade stainless steel for exceptional durability and strength, these screens will provide vital protection to the cooling radiators on your RX-8. Typically, damage to these radiators are not covered by a new car warranty and may be classified as "road hazard" damage, which may result in a very costly repair bill!*
The package includes two (2) Oil Cooler Screens and one (1) Air Conditioner Condenser Screen. For a larger photo of this screen set, click here.
Installation of these units can be easily undertaken with the removal of the RX-8 nose piece. Although this sounds like a daunting task, the removal of the nose can be accomplished in just a few minutes using only simple hand tools. For to review an instruction sheet on the removal of the nose.
|,|||-||56442|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Racing Beat Competition Race Pipe MX-5 ND 2016-2024|,|56442|,|399.00|,|338.00|,||,||,||,||,||,||,|Racing Beat Competition Race Pipe MX-5 ND 2016-2024
The Racing Beat MX-5 ND Competition Race Pipe (2-piece) is intended to replace the stock mid-pipe on the MX-5, thereby eliminating the integrated secondary catalytic converter.
Manufactured using 16-gauge, 2.375-inch OD stainless steel tubing, this race connecting pipe features mandrel bends and OEM style connecting flanges. Designed as a bolt-on component, this connecting pipe is easy to install and utilizes all existing mounting brackets and hangers, and includes all required gaskets and assembly hardware.
This Race Pipe section will mate to the outlet of the stock exhaust manifold, and the inlet of the stock muffler or the Racing Beat Muffler. This complete, 2-piece race pipe assembly weighs 13.75 lbs.
Emissions Note
The stock mid-pipe includes a position for the secondary oxygen sensor before the catalytic converter. The Racing Beat Competition Race Pipe includes an oxygen sensor position in a similar position. Since a factory-placed catalytic converter is being removed by the installation of this component, this race pipe is NOT considered emissions legal for street use and can be installed ONLY for off-highway racing applications.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||MAMIALFLBYRA|,|MIREPA|,|Racing Beat Exedy Lightweight Steel Flywheel 94-05 Miata 1.8 1994-2005|,|51455|,|489.99|,|339.00|,||,||,|5.000 |,||,||,||,|Racing Beat Exedy Lightweight Steel Flywheel 94-05 Miata 1.8 1994-2005
This stunning Exedy Lightweight Steel Flywheel can be installed on all 1994-2005 Miata applications (including MazdaSpeed models) and is compatible with both Mazda OE and performance-upgrade aftermarket clutch discs. Exedy flywheels are SFI-approved for use in specific racing applications.
Applications
Designed to retain enough mass for comfortable standing starts, this Exedy Miata flywheel is ideal for street use yet it is lighter to afford an improvement in low speed acceleration and to make shifting much smoother. For street use this lightweight steel flywheel not only allows the engine to accelerate more rapidly but allows for quicker and more precise shifting.This flywheel (215mm OD disc) can be used on the earlier 1990-93 Miata 1.6 ltr (200mm OD disc) application ONLY if the 1994-2005 (1.8 ltr) pressure plate AND clutch disc are used.
Precision Machining
Precision CNC-machined from a solid one-piece billet chromoly steel forging, the Exedy Miata flywheel features a fully-machined integrated ring gear for seamless starter operation.
Weight Comparison
The weight of the stock Miata 1.8 ltr flywheel is 19 lbs as compared to 12 lbs for the Exedy Lightweight Miata Steel Flywheel.
Installation Hardware
Exedy Flywheel kits include the flywheel unit and the appropriate mounting hardware, which includes the appropriate tensile-strength hardware to attach the pressure plate to the flywheel. DO NOT use other aftermarket flywheel mounting kits with the Exedy flywheels.
We strongly recommend replacing the throwout bearing during any clutch work to ensure trouble free performance. Also, we recommend replacing the transmission front and rear seal kit when re-installing the transmission to reduce the possibility of leakage.
Actual product image not shown in photo.
|,|"Select Year" "1994-2005 1.8L"|-||-|||-||RACBEAT41HEA1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata 4-1 Header|,|56005|,|689.99|,|579.00|,||,||,|15.000 |,||,||,||,|Racing Beat Mazda Miata 4-1 Header
Extensive research and development, involving over 200 on-chassis dyno runs, has allowed Racing Beat to develop this new header to it’s true potential. Designed entirely in-house by Jim Mederer, Racing Beat co-founder and chief engineer, this header combines the mid-range performance benefits associated with a tri-y (4-2-1) header, and the top end performance associated with a 4 into 1 (4:1) header.
Manufactured entirely from 304-stainless steel for superior durability, this header will offer many years of enthusiastic performance driving. Our exclusive cast, stainless steel engine-to-header flange features specially designed exhaust ports that transition to mate with the primary tubing. Large diameter 1.625 OD tubing has been used for the primary tubing, and then collects into the 2.375” OD secondary. Exhaust gas exits the header through a specially designed stainless-steel rear flange which mates to the factory catalytic converter.
All emissions control devices are retained, and a CARB emissions exemption test is pending.
|,|"Select Years" "Select Here" "1990-1993 (56005)" "1994-1997 (56006)" "1999-2000 (56007)" "2001-2005 (56008)"|-||-|"Shipping Cost" "add(+$89)"|-||-|||-||CRUISCONRELK1|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-1990-1997|,|Racing Beat Mazda Miata Cruise Control Relocation Kit|,|56510|,|35.99|,|26.40|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Cruise Control Relocation Kit
This kit is designed to relocate the factory installed cruise control actuator for use with the Racing Beat High Flow Air Assembly when installed on a 1990-1993 Miata.
This kit will relocate the factory installed cruise control actuator in the open area located next to the brake master cylinder. (See photo) Our kit includes a bracket, vacuum hose extension, mounting hardware and detailed installation instructions. This relatively simply relocation procedure can be completed in a short time using only basic hand tools.
|,|||-||MISPCLDIBYRA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Racing Beat Mazda Miata Exedy Sport Race Clutch Disc 1990-2005 - including MazdaSpeed |,|52524|,|269.99|,|239.95|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda Miata Exedy Sport Race Clutch Disc 1990-2005 - including MazdaSpeed
The Exedy Sport/Race Miata Clutch Disc (ZD09T) for the 1994-05 Miata (1.8 ltr engine, including MazdaSpeed) is manufactured using a sprung-hub riveted to a steel disc on which six sintered copper pads are bonded. This low-inertia disc is primarily intended for race use, but can be used for high performance non-turbo street applications.
This Miata clutch disc is intended for use with the stock pressure plate, or comparable. This disc be used as a replacement disc with the Exedy Stage II Complete (Thick) kits - PN 10903.
|,|"Select Year" "1990-1993" "1994-2005 add(+$30.00)"|-||-|||-||MAMIFLFRPLBY|,|MIREPA|,|Racing Beat Mazda Miata Flywheel Friction Plate 1990-2005|,|51430|,|139.00|,|115.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Flywheel Friction Plate 1990-2005
This friction plate is an exact replacement for the 1990-93 (Part No. 51452) or 1994-2005 Racing Beat Aluminum Flywheel (Part No. 51453)
* Only plate included and not whole fly wheel. Made in the USA
|,|"Select Year" "1990-1993 1.6L" "1994-2005 1.8L (11431)"|-||-|||-||RACBEATFRONL|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Front Lower Control Arm Brace 1990-2005|,|54008|,|189.99|,|158.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Front Lower Control Arm Brace 1990-2005
Unlike the many "steel pipe crimped at both ends" braces available from others, the Racing Beat Front Lower Control Arm Brace is a thick, cast aluminum brace that is both lightweight and rugged. As quoted by Miata Magazine, "The Racing Beat subframe brace is the nicest one we’ve ever seen, including Mazda’s."
Our brace has been powder-coated to virtually eliminate corrosion and is quickly installed beneath the transmission bell housing, attaching at the lower control arm chassis mounts. This brace attaches with a total of four (4) mounting bolts and is supplied with supporting -backing-plates- for a secure and superior attachment.
This brace, when installed in the 1990-93 Miata, provides significant and additional chassis stiffness, most noticeably in extreme performance driving. The 1994-97 and the 1999+ Miata chassis are equipped with a factory brace; however, in these applications, the Racing Beat brace offers greater chassis stiffness than does the factory brace. The Racing Beat brace can be used in addition to, or to completely replace, the stock component.
This brace is shipped complete with all necessary hardware and tools, and can be installed in minutes using only basic mechanical skills.
For All Years 1990-2005
|,|||-||HEDUSWBARMOB|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Heavy Duty Sway Bar Mounting Bracket 1990-2000|,|54110|,|59.99|,|51.02|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Heavy Duty Sway Bar Mounting Bracket 1990-2000
Racing Beat has developed these Heavy Duty Sway Bar Mounting Brackets for use on with their solid front sway bars. Originally developed for use with the tubular sway bars, these upgraded mounts can be used on all Racing Beat solid front sway bars. By welding a reinforcing gusset onto the standard mount, this strengthening feature minimizes any fore/aft movement of the sway bar mount. Additionally, this improvement minimizes the possibility of fatigue at the contact point between the bolt head and the bracket. Powder-coated to improve corrosion resistance, these brackets are easily installed with only basic hand tools.
These brackets are ideal for both Autocross/Solo competition and everyday spirited driving, offering a very economical level of performance insurance.
Made in the USA
|,|||-||RABELCAENDLI|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Lower Control Arm End Link Bracket Reinforcement Flanges|,|54111|,|39.99|,|30.50|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Lower Control Arm End Link Bracket Reinforcement Flanges
With the 1999 Miata, Mazda has made a change to the end link attachment bracket on the front lower control arms. The 1990-97 Miata was produced with a U shaped end link attachment brackets. The 1999-03 Miata is produced with a single-sided L shaped end link attachment bracket. Our observations have led us to believe that this L shaped design may not be strong enough to handle the demands of a stronger aftermarket sway bar. We STRONGLY recommended the addition of these Lower Control Arm Reinforcement Flanges. This modification will convert the L shaped bracket into a U shaped bracket, and while this modification requires some minor welding, we believe this effort is worthwhile. After completion of this modification, the stock end links can no longer be used.
Note: If the Lower Control Arm Reinforcement Flanges are added to the lower control arm attachment bracket, then our Heavy Duty Sway Bar End Link Kit (Part No. 154-201) MUST be used.
For 1999-2005
|,|||-||RACBEATLOWSI|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Racing Beat Mazda Miata Lower Side Skirts 1990-1997|,|57107|,|789.99|,|689.00|,||,||,|15.000 |,||,|sdfgsdfg|,||,|Racing Beat Mazda Miata Lower Side Skirts 1990-1997
Our Lower Side Fairings carry the Racing Beat inspired styling theme form front to rear, integrating our nose and bumper components to provide a transition from the mild factory styling to the aggressive look seen here. These fairings incorporate styling cues from our front and rear bumpers to give your Miata a wider and more aggressive stance.
These fairings are crafted with hand-laid fiberglass mat and prepped for final fit and finishing, and are designed for ease-of-installation with stainless steel screws and high bond-strength automotive tape.
Note: The Lower Side Fairings cover the side of the Miata from the front wheel opening, under the door opening, and back to the rear wheel opening. The Rear Side Fairings we offer, cover only the portion behind the door in front of the rear wheel opening.
Price is for the complete set.
Due to the size of this item, additional shipping charges will be reflected in your total at checkout.
|,|"Shipping Cost" "add(+$129)"|-||-|||-||ADPHOTRACBEA|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Racing Beat Mazda Miata Performance High Flow Air Intake Kit 1994-1997 1.8L|,|56501|,|385.00|,|329.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Performance High Flow Air Intake Kit 1994-1997 1.8L
This Intake Kit now has 3-4 weeks lead time.
The Miata High Flow Air Inlet Assembly combines the advantages of a low restriction K&N air filter with a smoother air passage into the factory air meter assembly to improve throttle response and horsepower. Designed and engineered by Racing Beat, this handsome assembly, with its polished aluminum casting, positions the air filter cone away from the exhaust header to minimize the intake of heated air. This intake has proven extremely popular over the years with Miata owners worldwide.
Performance
As reviewed by Miata Magazine, "Around 3500 rpm a new pull develops that increases with the RPM. Around 5,000 the power gain is easily noticed over the factory system. The Racing Beat intake will look good under any hood with its curvy aluminum elbow, but under its good looks is a performer."
Sport Compact Car Magazine reviewed this intake in the “The Great Intake Shootout” in the July 2000 issue and stated the following: “This intake was the puzzler of the test. Despite its higher intake temperatures, it remains the power king of the temperature-corrected dyno tests. Due to that fact, it's our favorite. Its hard to argue with the most power, the best sound and the best price in one intake. Plus it takes minutes to install and looks pretty cool.” To review this article, click here.
Dyno Chart
Our dyno tests have shown a 6 HP increase over the stock air filter assembly. This dyno test was conducted on a stock 1995 Miata (1.8 ltr.) upgraded with our High Flow Air Intake.
Only minimal effort is required to complete the installation of this assembly, with all mounting hardware and fully detailed instructions included. Use of the K&N Filter Charger Kit is an inexpensive way to clean, protect and prolong the life of your air filter.
Cruise Control Note: This intake assembly comes supplied with mounting hardware to re-position the factory installed cruise control actuator.
The 1994-97 High Flow Air Intake has passed the California emissions testing test requirements. Each kit includes a CARB exemption decal that identifies the Executive Order number associated with this intake.
Note: We are often asked if this air intake assembly is compatible with a specific aftermarket shock tower brace. For detailed information on the use of a shock tower brace on the Miata, see the additional information tab. With the vast number of aftermarket braces available on the market, we are not certain of the compatibility of these units with our air intake. We suggest you contact the part manufacturer, dealer, club members, newsgroups, and on-line forums to determine the compatibility of various aftermarket part combinations.
Made in the U.S.A.
|,|||-||ADPHOTRACBEA1|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Racing Beat Mazda Miata Performance High Flow Air Intake Kit 1999-2005|,|56502|,|385.00|,|329.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Performance High Flow Air Intake Kit 1999-2005 (Non-turbo)
The Miata High Flow Air Inlet Assembly (larger photo) for the 1999-05 Miata combines the advantages of a low restriction, reusable K&N air filter with a smoother air passage into the factory air meter assembly to improve airflow. Designed and engineered by Racing Beat, this handsome assembly, with its polished aluminum casting, positions the genuine K&N air filter element in the area behind the headlamp.
For models equipped with the factory shock tower brace, we offer the optional Shock Tower Brace Mounting Bracket for 1999-00 Miatas (shown on the Blue car above) or 2001-05 Miatas (shown on the Red car above).
With the second generation Miata, it is apparent that Mazda engineers put some effort into directing fresh air into the engine compartment. The engineers have tried to route air through the wheel well area and up through the sheet metal body panels. The stock air-box snorkel is positioned over an opening in the engine compartment body panel to take advantage of the improved airflow.
The High Flow Air Inlet Assembly replaces the stock air box and positions the air filter over this body panel opening. Not only does this unit look great, but the sound of the air rushing through the inlet tube gives the Miata a decidedly more aggressive sound!
Performance & Dyno Charts
Our dyno tests of this air intake assembly showed gains of an additional 6 HP gain over the stock intake. This intake increased horsepower from 110 to 116 on our dyno runs, with a slight improvement in mid-range torque.
Emissions
Are you required to keep your car emissions legal? Is your car required to pass a tailpipe emissions test? The Racing Beat High Flow Intake Assembly has received an emissions exemption (E.O. D-450-6) from the California Air Resources Board (CARB) and is considered legal for street use.
This unit is very easy to install and is supplied with fully detailed installation instructions. (Allow approximately ½ hour for installation) Use of the K&N Filter Charger Kit is an inexpensive way to clean, protect and prolong the life of your air filter.
This intake is compatible with Miatas equipped with the anti-lock braking system (ABS). (The location of the ABS module required Mazda to relocate the windshield wiper fluid reservoir to the area behind the stock air intake box.)
Made in the U.S.A
|,|||-||MAMICOAIRDUB|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Racing Beat Mazda Miata Performance High Flow Intake Cold Air Duct 1999-2005 (Miata Non-turbo)|,|56499|,|449.00|,|383.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Performance High Flow Intake Cold Air Duct 1999-2005 (Miata Non-turbo)
Racing Beat offers a Cold Air Intake Duct for use with the Racing Beat High Flow Intake (1999-2005 Miata NT models) that is both functional and attractive! Intended to function with the Racing Beat High Flow Intake Assembly on all 1999-2005 non-turbo Miatas, the Cold Air Duct allows the intake to draw ONLY cooler ambient air into the intake duct.
When our engineering staff was modifying our High Flow Intake Kit to function on the revised second generation Miata (1999-05), they noted that Mazda had placed a sizable opening in the engine compartment just behind the driver's side headlamp. Much to our luck, the inlet end of our original High Flow Intake was positioned almost directly over this opening!
After modifying the High Flow Intake Kit to fit this revised application, we set our sights on developing a Cold Air Intake Duct to utilize this new found source of cooler intake air. After debating on whether to use plastic or fiberglass material, and consulting with several manufacturing shops, we reviewed many prototypes and finally arrived at a finished product.
Each duct is produced from hand-laid fiberglass mat and finished a high-gloss black gel-coat finish. The resulting product is a beautiful piece that is both strong and lightweight. Fitted to the exact contours of the engine compartment, and finished with an interlocking insulation trim, the precision fit of this intake virtually eliminates the introduction of hot engine compartment air into the intake.
Intake Temperatures
As with all Racing Beat parts, we undertook extensive testing during the development of this kit. Prior to testing, a hole was drilled into the end of the K&N filter and a temperature sensor probe was inserted, which led to a digital temperature gauge in the cockpit. During test runs at 55 MPH (79 degrees ambient air temperature), intake air temperatures were recorded up to 15 degrees cooler inside the air filter with the duct installed!
California Emissions Notice
This intake duct has received an emissions exemption from CARB (California Air Resource Board). Each intake duct is supplied with a compliance decal, which lists the applicable Executive Order number and the specific application. Simply install this decal under the hood of your car prior to your next tail pipe emissions test.
Price is for the cold air duct ONLY, the High Flow Kit is available separately.
|,|||-||POWPULCONPIP|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Racing Beat Mazda Miata Power Pulse Connecting Pipe 1990-1995|,|56437|,|289.99|,|229.00|,||,||,|10.000 |,||,||,||,|Racing Beat Mazda Miata Power Pulse Connecting Pipe 1990-1995
A Power Pulse Connecting Pipe is required with our Power Pulse muffler assemblies on all 1990-1995 Miatas for proper fitment. The Racing Beat Power Pulse Connecting Pipe is constructed with 2.375" OD (60mm), stainless steel tubing with and uses cast stainless-steel flanges for positive gas sealing. This connecting pipe incorporates a pre-silencer that has been tuned to provide our Power Pulse Mufflers with an aggressive, deep exhaust note. A gasket is supplied for the connection of the muffler to the connecting pipe.
If you prefer a slightly louder exhaust note for your Miata, you may want to consider the use of our Sport Connecting Pipe. The Sport Connecting Pipe does not include a presilencer.
|,|"Shipping Cost" "add(+$85)"|-||-|||-||POWPULCONPIP1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Racing Beat Mazda Miata Power Pulse Connecting Pipe 1996-1997|,|56438|,|299.99|,|229.00|,||,||,|10.000 |,||,||,||,|Racing Beat Mazda Miata Power Pulse Connecting Pipe 1996-1997
A Power Pulse Connecting Pipe is required with our Power Pulse muffler assemblies for proper fitment. The Racing Beat Power Pulse Connecting Pipe is constructed with 2.375-inch OD (60mm), stainless steel tubing with and uses cast stainless-steel flanges for positive gas sealing. This connecting pipe incorporates a pre-silencer that has been tuned to provide our Power Pulse Mufflers with an aggressive, deep exhaust note. A gasket is supplied for the connection of the muffler to the connecting pipe
The 1996-97 connecting pipe incorporates an emissions control OBD2 sensor position.
|,|"Miata Year" "1996-1997"|-||-|"Shipping Cost" "add(+$85)"|-||-|||-||RACBEATDUALT|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Racing Beat Mazda Miata Power Pulse Dual Outlet Muffler 1990-1997 - Sale! |,|56466|,|589.99|,|516.00|,||,||,|15.000 |,||,||,||,|Racing Beat Mazda Miata Power Pulse Dual Outlet Muffler 1990-1997
If you want an unmistakable look of performance from your Miata, the Racing Beat Dual Tip Exhaust is it.
Our Racing Beat Power Pulse Dual Tip Exhaust project was originally started after a request by Mazda USA for a prototype system for use on one of their project Miatas. Reaction was very positive and we soon included this exhaust system into our Racing Beat line-up.
The Racing Beat Dual Tip Muffler for the 1990-1997 Miata is produced entirely from 304-stainless steel for superior durability and appearance. The inlet tube features a thick, cast-stainless steel flange which provides excellent gas sealing capabilities. Each stainless steel outlet tube feeds into a double-walled tip for an aggressive and sporty look. The two 3.5" OD exhaust tips are manufactured using highly polished 304-stainless steel and are slightly oval in shape to provide a perfect balance and proportional fit with the Miata's rear bumper. Each tip features a etched Racing Beat logo to add the finishing touch!
Like all Racing Beat exhaust components, this system has been tuned to provide the Miata with a deep, throaty exhaust note - without any harsh, buzzy or "raspy" sounds. When combined with a Racing Beat Power Pulse Connecting Pipe, this dual tip exhaust system will add just the right amount of "attitude" to your Miata!
Each Power Pulse system comes complete with fully detailed instructions and mounting hardware, and can be easily installed by the weekend mechanic using only simple hand tools. A positioning template is provided to assist with cutting of the new opening for the additional outlet tip. The new opening can be cut through the soft urethane bumper material using only a small utility knife. A small sanding block is then required to smooth out the opening to the final shape.
The Dual Tip Muffler for the 1990-97 applications must be combined with a connecting pipe. See the correct Power Pulse Connecting Pipe for either the 1990-95 or 1996-97 (OBD-II cars) application. Two connecting pipe versions are available, select from either the Sport or Power Pulse version (year specific). This exhaust is "cat-back" emissions legal and meets California sound level requirements.
Assembled in the USA by Racing Beat, Inc.
|,|"Shipping Cost" "add(+$98)"|-||-|||-||RACBEATDUALT2|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Power Pulse Dual Outlet Muffler 1999-2005|,|56467|,|589.99|,|516.00|,||,||,|15.000 |,||,||,||,|Racing Beat Mazda Miata Power Pulse Dual Outlet Muffler 1999-2005
Racing Beat proudly introduces the latest performance muffler to our exhaust system line-up! This dual tip muffler is arguably one of the finest mufflers available for your Miata today.
Manufactured using pre-polished 304 stainless steel, these handcrafted mufflers are a pure work of automotive art. From the cast stainless-steel connecting flange, reinforcing gussets and hangers, and the highly polished stainless muffler tips, the attention to detail that has been undertaken is readily apparent.
The two 3.5-inch exhaust tips featured on this muffler are manufactured using highly polished 304-stainless steel and are slightly oval in shape to provide a perfect balance and proportion with the Miata’s rear bumper. Each tip features a subtle, bead-blasted Racing Beat logo to add the finishing touch!
Designed entirely by Racing Beat, this muffler features stainless steel and ceramic sound-deadening insulation to provide the optimum exhaust note for your Miata. The exhaust note will be slightly louder than stock, but retains the subtle and distinctive Miata exhaust tone.
You'll love this beautiful exhaust on your Miata!
Due to the size and weight of this item, additional shipping charges will be reflected in your total.
*Manual Transmission only
|,|"Shipping Cost" "add(+$104)"|-||-|||-||RACBEATPOWPU1|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Racing Beat Mazda Miata Power Pulse Muffler 1990-1997 - Sale! |,|56451|,|489.99|,|414.00|,||,||,|15.000 |,||,|sdfgdsfg|,||,|Racing Beat Mazda Miata Stainless Steel Power Pulse Muffler 1990-1997 Miata
Designed and manufactured by Racing Beat, our Power Pulse Muffler is intended for use on all 1990-1997 Miatas. The heart of our Power Pulse Exhaust System is our polished 304-stainless steel muffler canister. This polished canister is equipped with stainless steel inlet and outlet pipes for superior durability. For maximum performance the Power Pulse Muffler features the same 2.375" OD Straight-Flow internal design configuration as our RX-7 Turbo II exhaust systems. The 3.5" OD exhaust tip is manufactured using highly polished 304-stainless steel and is slightly oval in shape to provide a perfect balance and proportional look for the Miata's rear bumper. Each tip features a etched Racing Beat logo to add the finishing touch!
Designed entirely by Racing Beat, this muffler features a internal combination of stainless steel wool and ceramic sound-deadening packing insulation to provide the optimum exhaust note for your Miata. The Power Pulse Muffler offers a deep, throaty exhaust note, without any harsh, buzzy or "droning" tones. All Racing Beat's exhaust are tuned in-house by our engineering team to produce a modest exhaust tone at low speeds, and a bit more "attitude" under full throttle acceleration.
Performance
As reviewed in the November 1999 issue of Import Tuner, this Power Pulse exhaust system (muffler and connecting pipe) added 3.2 horsepower to the wheels of a 1990 Miata. Combine this exhaust with a Racing Beat High Flow Air Intake for gains of up to 9 hp!
Connecting Pipe
Each Power Pulse Muffler requires the use of a Racing Beat connecting pipe section. We offer two (2) versions of this pipe: the Power Pulse Connecting Pipe, or the Sport Connecting Pipe.
The Power Pulse Connecting Pipe (year specific) incorporates a presilencer to moderate the sound level to deep, throaty tone. Both the muffler canister and the presilencer are manufactured using a stainless steel perforated tube core, wrapped with stainless steel wool, and packed to capacity with a high temperature ceramic wool. This design technique allows for a low restriction, straight through design, combined with superior sound dampening characteristics.
The Sport Connecting Pipe (year specific) is produced without the presilencer section, and offers a louder, and more robust exhaust note. While not obnoxious or buzzy, this pipe will allow the exhaust note to rise more moderately under acceleration.
Easy-to-install, this system can be bolted to the car in minutes using the supplied hardware kit. The muffler is "cat-back" emissions legal and meets all California sound level requirements.
Note: This muffler must be used with a Connecting Pipe (select the year for your application) for correct fitment.
Assembled in the USA by Racing Beat, Inc.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||RACBEATPOWPU3|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Power Pulse Muffler 1999-2005|,|56461|,|489.99|,|414.00|,||,||,|15.000 |,||,||,||,|Racing Beat Mazda Miata Power Pulse Muffler 1999-2005
Application: 1999-2005 Miata - Except 1999-2003 Mazda Miata equipped with Auto Transmission - The heart of our Racing Beat Power Pulse muffler is our polished 304-stainless steel canister. The inlet and outlet tubes also feature mandrel-bent 304-stainless steel for excellent durability and appearance. For maximum performance potential, our muffler features the same 2.375" OD Straight-Flow internal design configuration as our RX-7 Turbo II exhaust systems. Finished with a 3.5" OD polished 304-stainless steel tip, this large diameter muffler will handle applications from stock to race.
Designed and manufactured entirely by Racing Beat, this muffler features stainless steel wool and ceramic sound-deadening packing insulation to provide the optimum exhaust note for your Mazda Miata. The Power Pulse Muffler offers a deep, throaty exhaust note without any harsh, buzzy or droning tones. All Racing Beat exhaust systems are tuned in-house by our engineering staff to produce a modest exhaust tone at low speeds, and a bit more "attitude" under full throttle acceleration.
Although this muffler can be installed on the Mazdaspeed models, we offer a Power Pulse Muffler specifically for the 2004-2005 Mazdaspeed Miata. This muffler version is dimensionally identical to the non-turbo unit, but the internal design has been changed to provide a slightly more aggressive exhaust tone for the turbo application.
On an otherwise stock 1999 Mazda Miata (baseline hp - 110.6) our dyno tests have shown a 2.4 hp gain (max hp - 113.0) with the addition of this muffler. Combine this muffler with a Racing Beat air intake for gains of up to 8.5 hp! Don't be swayed by exaggerated performance claims made by other aftermarket suppliers - big HP gains from an aftermarket rear muffler simply don't exist. If they did, why would Mazda leave this untapped horsepower behind???
Each Power Pulse muffler is supplied with a replacement OEM donut style gasket. Installation can be completed using basic hand tools; simply unbolt the two retaining nuts, slip the original muffler off the rubber hanger grommets, and then reverse the process for installation of the new Power Pulse muffler. The Power Pulse muffler is 50-state emissions legal and meets all California sound level requirements.
Connecting Pipe Section Replacement
For the 1999-2005 Miata, Mazda incorporated both a non-removable catalytic converter and a presilencer into the mid-chassis connecting pipe section. Since there is no flanged connection behind this catalytic converter, installing a traditional bolt-on, "cat-back" exhaust system on the Miata isn't possible. Another alternative is to replace the entire connecting pipe section with larger diameter connecting pipe section with an integrated "high flow" cat converter. However, emissions laws are changing rapidly across the US and the sale, distribution and use of these non-exempt performance catalytic converters are facing increasing restrictions. If you are considering this option consult your local emissions authorities before proceeding.
|,|"Select Transmission" "Select Here" "Manual 99-05" "Automatic 99-03"|-||-|"Shipping Cost" "add(+$98)"|-||-|||-||RABERACOPI19|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Race Connecting Pipe 1999-2005 NT|,|56439|,|389.99|,|325.00|,||,||,|10.000 |,||,||,||,|Racing Beat Mazda Miata Race Connecting Pipe 1999-2005 NT * (Excluding 2004-05 Mazdaspeed Turbo & 1999-2003 Automatic Transmission Equipped Cars)
This fully 304 stainless-steel high-flow connecting pipe replaces the factory middle pipe and integrated catalytic converter. Intended for 1999-05 Miatas, this connecting pipe will meet the demands of any high horsepower normally-aspirated or aftermarket turbo-charged engine. Note: This connecting pipe is not compatible with cars equipped with the factory mid-chassis brace that was introduced on the 2001 Miata.
Manufactured from 2.375-inch OD stainless steel tubing, this connecting pipe includes a large diameter presilencer for noise reduction. Designed as a bolt-on component, this connecting pipe is easy to install and utilizes all existing mounting brackets and hangers.
This pipe has no provision for a rear oxygen sensor mounting position, since the placement of the rear sensor in this pipe would trigger a "check engine" light. This product is intended for race vehicles, and it is assumed that all emissions control devices will be removed from the vehicle. If class rules require emission control devices be retained, we suggest relocating the rear oxygen sensor to an open area in the engine compartment. (See below for more details.)
We suggest the following options:
1. Federal emissions equipped cars:
The rear oxygen sensor must be removed from the stock connecting pipe prior to the installation of the race connecting pipe. This sensor can be: 1) left in a position under the Miata chassis (exposed to the elements), or 2) relocated to an open area in the engine compartment (protected from the elements). If the sensor is to be relocated to the engine compartment: 1) a Racing Beat 51" wiring extension, featuring OEM style plug-in connectors, can be ordered (Part No. 90022), or 2) a wiring extension can be fabricated by your shop, crew, etc.. (Note: The use of the Racing Beat harness allows for easy replacement of the stock connecting pipe.)
2. California emissions equipped cars (In addition to CA, these models were sold in several northeastern states - check the emissions decal under the hood of your car to verify the emissions status of your car.)
A. Cars NOT equipped with a header - Installation of this pipe does not require the repositioning of the rear oxygen sensor. This pipe can be used on a car NOT equipped with a header without any need to relocate the rear O2 sensor.
B. Cars that ARE equipped with a Racing Beat Header - The rear oxygen sensor must be removed from the "new" mounting position in the stock connecting pipe prior to the installation of the race connecting pipe. Using the wiring harness that was supplied with the header kit, the rear sensor can be relocated to an open area in the engine compartment.
* This component is legal only for racing vehicles, which may never be used upon a highway.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||RACING-BEAT-MAZDA-MIATA-RACE-PIPE-1990-1993|,|19MAMIEXHE|,|Racing Beat Mazda Miata Race Pipe 1990-1993|,|56433|,|139.99|,|115.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Race Pipe 1990-1993
Applications: 1990-1993 Mazda Miata. This fully 304 stainless-steel high-flow Mazda Miata race connecting pipe replaces the factory catalytic converter. Intended for 1990-1993 Miatas, this connecting pipe will meet the demands of any high horsepower normally-aspirated or aftermarket turbo-charged engine.
Manufactured from 2.375" OD stainless steel tubing, this connecting pipe includes 2 cast stainless steel Racing Beat flanges. Designed as a bolt-on component, this Miata race connecting pipe is a direct replacement for the factory catalytic converter.
* Legal in California only for racing vehicles, which may never be used upon a highway.
|,|||-||RACING-BEAT-MAZDA-MIATA-RACE-PIPE-1994-1997|,|19MAMIEXHE|,|Racing Beat Mazda Miata Race Pipe 1994-1997|,|56434|,|139.99|,|115.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Race Pipe 1994-1997
Applications: 1994-1997 Mazda Miata - This fully 304 stainless-steel high-flow Mazda Miata race connecting pipe replaces the factory catalytic converter. Intended for 1994-1997 Miatas, this connecting pipe will meet the demands of any high horsepower normally-aspirated or aftermarket turbo-charged engine.
Manufactured from 2.375" OD stainless steel tubing, this connecting pipe includes 2 cast stainless-steel Racing Beat flanges. Designed as a bolt-on component, this Mazda Miata race connecting pipe is a direct replacement for the factory catalytic converter.
* Legal in California only for racing vehicles, which may never be used upon a highway.
|,|||-||RACBEATREARB|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Racing Beat Mazda Miata Rear Bumper Kit 1990-1997|,|57109|,|759.99|,|676.00|,||,||,|150.000 |,||,||,||,|Racing Beat Mazda Miata Rear Bumper Kit 1990-1997
The Miata Rear Bumper Kit replaces the original rear bumper and offers the Miata enthusiast a substantial improvement in the appearance of the Miata as viewed from the rear and rear quarter angles. Manufactured with hand-laid fiberglass mat and easily prepped for final painting, the unit is simple to install with the stock mounting hardware and retains the stock sidelights and internal structural bumper subcomponents.
Due to the size and weight of this item additional shipping charges will be reflected in your total at checkout.
|,|"Shipping Cost" "add(+$249)"|-||-|||-||RABERESIFA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Racing Beat Mazda Miata Rear Fairing Kit 1990-1997|,|57108|,|399.99|,|343.00|,||,||,|15.000 |,||,|sdfgsdfg|,||,|Racing Beat Mazda Miata Rear Fairing Kit 1990-1997
The Rear Fairing Kit balances the beefed-up approach presented by our Rear Bumper Kit. These skirts are installed between the door opening and the rear wheel well. Utilizing the same top quality fiberglass construction techniques found in our other fiberglass components, the Rear Fairing Kit offers simple installation with just a few stainless steel metal screws. These fairings are crafted with hand-laid fiberglass mat and prepped for final fit and finishing.
Note: The Lower Side Fairings cover the side of the Miata from the front wheel opening, under the door opening, and back to the rear wheel opening. The Rear Side Fairings cover only the portion between the door and the front edge of the rear wheel opening.
Click on the photo for a larger image.
|,|||-||RACBEATREARL|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Rear Lower Control Arm Brace|,|54009|,|149.99|,|128.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Rear Lower Control Arm Brace
The Racing Beat-design Rear Lower Control Arm Brace is intended for 1990 through 1991 1/2 Miata chassis. This brace will also fit the 1999-2005 Miata chassis with no modifications. While it can be installed on other Miata chassis, substantial cutting effort, to facilitate clearance, is required to modify the attachment points used for the stock brace found on these chassis.
Our goal was to design a brace that "boxed- in" the rear control arm mounts and provide a complete "four-point" mounted brace. This design offers additional chassis stiffening over a simple -two-point- brace.
Racing Beat’s Lower Control Arm Brace is laser-cut from 14-gauge mild steel, machine-formed, and MIG-welded to produced an assembly that is both rugged and attractive. The brace is powder-coated to virtually eliminate corrosion and requires only basic hand tools to install.
|,|||-||RACBEATFRONS|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Racing Beat Mazda Miata Solid Front Sway Bar 1990-1997|,|54100|,|209.00|,|178.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda Miata Solid Front Sway Bar 1990-1997
Racing Beat has refined 30 years of racing experience and undisputed successes into the design of our Miata suspension components. No other Miata aftermarket manufacturer can make this claim. From the MotorTrend Magazine (June, 1993) all-time slalom record (73.6 MPH) to our recent Sport Compact Car skidpad record (1.1g), Racing Beat suspension components have proven themselves where it counts, on the track. Don’t fall for the “hype” when others say their bars are the “best", look for independent confirmation from the nation’s leading automotive publications.
Racing Beat-designed sway bars reduce chassis roll in turns and increase your car’s sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys, and precise heat-treating processes are combined to produce top performance components. All Racing Beat sway bars are finished with a distinctive, red powder coating, which provides a smooth, glossy protective layer. You can be assured of many years of superior handling performance with these proven bars!
The diameter of the front bar is 15/16", and weighs 10 lbs. (Stock – .3/4” diameter, 6 lbs.) Each sway bar is supplied with replacement urethane bushings, Prothane grease, and detailed installation instructions.
|,|"Select Years" "Select Here" "1990-1993(54100)" "1994-1997(54102)"|-||-|||-||RACBEATREARS|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Solid Rear Sway Bar 1990-2005|,|54101|,|179.99|,|152.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda Miata Solid Rear Sway Bar 1990-2005
The Racing Beat solid rear sway bar is ideally matched to perform with our wide selection of front sway bars. While the Racing Beat solid rear bar can be fitted on any 1990-2005 application, we do not recommend the use of this bar on the 2001-05 models. Our testing has shown that the 2001-05 Miata exhibits low-speed oversteer that can be corrected by the addition of only a larger front sway bar. For the 2001-05 application we recommend our 1.25" front tubular bar. We have found that the use of this larger front bar offers a more "balanced" handling characteristic for this particular chassis.
Racing Beat has refined 30 years of racing experience and undisputed successes into the design of our Miata suspension components. From a MotorTrend Magazine (RB 1990 Miata, June, 1993) all-time slalom record (73.6 MPH) to a Sport Compact Car (RB 1999 Miata ) skidpad record (1.1g), Racing Beat suspension components have proven themselves where it counts, on the track. Don't fall for the hype when others say their bars are the "best", look for independent confirmation from the nation's leading automotive publications.
Specifications
The diameter of the Racing Beat rear bar is 5/8" (16mm), and weighs 3.5 lbs. (Stock - 11 or 12 mm, diameter, 2.2 lbs.) and features two (2) endlink attachment holes. Each sway bar is supplied with replacement urethane bushings, lateral bar stopper bushings & clamps, Prothane grease, and detailed installation instructions.
Racing Applications
For racers in the SCCA E Stock class, the use of the RB solid front bar (and stock rear bar) is a popular combination. This bar can also be combined with the Brace Kit Hardware. (The brace itself is not legal in this class, but the supporting hardware can be used.)
Reference Guides
To view a complete chart of our Miata Sway Bar Application Guide (PDF), click here, or view a Miata Magazine reprint of a step-by step installation guide and tech article featuring Racing Beat's sway bars.>
When adding high performance suspension components to any vehicle, the result is an increased demand on the vehicle's stock components. We have designed these high performance sway bar components to complement and further enhance your vehicle's performance. We strongly recommend you consider your specific driving requirements when upgrading your vehicle's suspension and select components accordingly.
Suggested Optional Components
Combine this sway bar with the Racing Beat Sway Bar Brace Kit and Heavy Duty Sway Bar End Links to fully exploit the potential of your car's performance.
|,|||-||RABESPCOPI191|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-1990-1997|,|Racing Beat Mazda Miata Sport Connecting Pipe 1996-1997 (OBD-II equipped cars)|,|56436|,|249.99|,|185.00|,||,||,|10.000 |,||,||,||,|Racing Beat Mazda Miata Sport Connecting Pipe 1996-1997 (OBD-II equipped cars)
The Sport Connecting pipe was originally designed to accompany our older style, “reverse-flow” Sport Mufflers. We have since discontinued the line of Sport Mufflers, but many customers have requested the connecting pipe that was sold with these systems. For those of you that would like a “louder” and lighter exhaust system, the Sport Connecting Pipe can be used with our Power Pulse Muffler. Unlike the connecting pipe that that is intended to accompany the Power Pulse Muffler, the Sport Connecting Pipe is NOT equipped with a presilencer. Produced from 2.375" OD 304-stainless steel, this connecting pipe will offer years of performance driving. This connecting pipe is equipped with an oxygen sensor mounting position for the 1996-97 OBD-II equipped cars.
Many people ask just how much louder the Sport Pipe is as compared to the Power Pulse Pipe. For comparison purposes, we undertook a series of decibel readings to record the sound level outputs.
Test Parameter
We used our 1990 RB Miata (1.6 ltr) in this test. The car is equipped with a RB High Flow Intake, 4:1 Header, and Power Pulse muffler. The different connecting pipes were installed and the car was lowered to the ground prior to testing. Using a handheld decibel meter, a sound level measurement was taken at a 45 degree angle, approximately 18” away from the muffler tip, The measurements are as follows:
Power Pulse Pipe (with presilencer)
Idle: 74db
3000 RPM: 82 db
5000 RPM: 87 db
Sport Pipe (without presilencer)
Idle: 75db
3000 RPM: 89 db
5000 RPM: 92 db
(Legal limit for California is 95 db.)
Next, the Racing Beat sales staff drove the car to obtain subjective opinions on the sound quality of the Sport Pipe configured exhaust.
Evaluation:
We were quite surprised with the sound output of this Sport Pipe! Quite frankly we were expecting to hear a harsh, buzzy tone without a presilencer, but this was not the case. Although the sound seemed to increase sharply at 3000 RPM, it was NOT harsh or buzzy but retained the deep, throaty tone that was similar to the resonated connecting pipe. Even though it was louder, we all agreed that the sound was “streetable” and still retained the sound quality of the Power Pulse system.
Conclusion:
A lighter weight alternative to the resonated connecting pipe, the Sport Pipe offers a modest sound level increase over the Power Pulse Pipe, but in our opinion this pipe is adequate for street or track use.
Made in the USA
|,|"Miata Year" "1996-1997"|-||-|"Shipping Cost" "add(+$79)"|-||-|||-||RACBEATSTREE|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Suspension Spring Set 1990-2005|,|54080|,|289.99|,|236.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda Miata Suspension Spring Set 1990-2005
Racing Beat Street springs will provide your Miata with excellent handling and a very sleek lowered look.
These are linear rate springs with a spring rate of 203 lbs/in. which provides a rate increase of 30% over the stock springs. These springs will provide a modest drop of approx 1.25-inch in the front and 1-inch in the rear.
We recommend upgrading to performace shocks with these springs.
Price is for a complete set of 4 Springs!
|,|"For Years" "Select Here" "1990-1993" "1994-1997" "1999-2000" "2001-2005"|-||-|||-||SWAYBARBRACK|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Sway Bar Brace Kit 1990-2005 (Except Mazdaspeed)|,|54121|,|185.99|,|152.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Sway Bar Brace Kit 1990-2005 (Except Mazdaspeed)
Developed to stiffen any 1990-2005 Miata chassis, this assembly proves most beneficial when using any relatively strong aftermarket sway bar, including Racing Beat’s tubular bar. This kit both effectively minimizes chassis flex that reduces sway bar performance and eliminates possible cracking of the sway bar chassis mounts that results from repeated hard cornering.
NOTE: This brace kit will fit all Miatas, but is intended primarily for 1990-1995 Miatas equipped with POWER STEERING. The routing of the power steering lines required that we modify the brace support bar to provide adequate clearance for these lines on this application.
Several years ago Racing Beat developed a Front Sway Bar Reinforcement Brace for the 1993 RX-7 that suffered this same problem. We found that we could adapt this part for the Miata by designing a brace that would: 1) Tie both left and right sway bar chassis mounts together, and 2) add additional support to the sway bar chassis mount. Using the mounting bolts and retaining nuts supplied in the kit, a support bar is placed into position and tightened against the frame rail. (The support bar is indicated by the BLUE arrow in the above photo.) At the same time as the retaining nuts are being tightened against the support block, the sway bar mounting bolt is actually being forced outward against the sway bar chassis mount. (The above photo shows a close-up of the support bar in position.) This support provides a very simple and extremely effective way to load the mount and eliminate potential cracking and minimize movement.
Manufactured from hollow-core 1019 steel and utilizing laser-cut end flanges, this brace is finished with a rust-proof powdercoat finish. Installation is accomplished by simply removing the sway bar mounting bolts and inserting the brace and support bar. Step-by-step instructions with fully detailed photos are included for easy installation.
|,|||-||MAMISWBARBRK|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Sway Bar Brace Kit Hardware 1990-2005|,|54122|,|61.99|,|51.99|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Sway Bar Brace Kit Hardware 1990-2005
In various racing classes (Autocross - Stock and C-Street Prepared) the use of the actual sway bar brace component is not allowed. However, the use of the hardware components that add bracing to the stock sway bar mounts are allowed. (We suggest you refer to your specific class regulations for current rules.)
For 1990-05 Miata’s (Except 1990-95 w/Power Steering) we offer the aluminum supporting blocks and mounting bolts that are acceptable for racing use. These components offer critical reinforcement to the stock sway bar mounts and provide a "cheap" form of insurance against possible breakage of the stock sway bar mounts.
For 1990-95 Miata’s equipped with power steering we offer modified supporting blocks (As seen in the below photo, there is a channel in one of the blocks to allow clearance for the rigid power steering line.) and mounting bolts that have been specifically designed for this application. These components offer critical reinforcement to the stock sway bar mounts and provide a "cheap" form of insurance against possible breakage of the stock sway bar mounts.
Made in the USA by Racing Beat, Inc.
|,|"Select Model" "1990-2005 (except 90-95 w/power steering)" "1990-1995 w/power steering add(+$10)"|-||-|||-||FB01-28-155|,|20MAMISUANDS2|,|Racing Beat Mazda Miata Sway Bar Bracket - Mazda OE Rear 1990-2015|,|FB01-28-155|,|5.50|,|4.29|,||,||,||,||,||,||,|Racing Beat Mazda Miata Sway Bar Bracket - Mazda OE Rear 1990-2015
Mazda Sway Bar Bracket - (FB01-28-155) - Sold individually, two (2) required per bar. If you need to replace the rear sway bar brackets for your Miata, MX-5 we offer the genuine Mazda part. This simple bracket has been offered by Mazda for many years and has been included on several different applications for use on the rear sway bar.
This bracket can be used with the following genuine Mazda sway bar & Racing Beat Rear sway bars:
- 1990-15 Miata/MX-5 - Rear
- Part No. 54101 Miata - Rear
- Part No. 54109 MX-5 - Rear
(This bracket is applicable for use with the bushings supplied with the Racing Beat rear bars listed above.)
Remember, you must order TWO (2) clamps for each bar!
|,|||-||SWAYBARENDLI|,|SHOP-BY-TOP-MIATA-BRANDS-RACING-BEAT|,|Racing Beat Mazda Miata Sway Bar End Links 1990-1997 (fits F or R) / 1990-2005 (fits Rear Only)|,|54200|,|119.99|,|89.70|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Sway Bar End Links 1990-1997 (fits F or R) / 1990-2005 (fits Rear Only)
Racing Beat-designed Adjustable HD (Heavy Duty) Sway Bar Links are a direct swap with the 90-97 (front or rear) and 90-05 (rear only) Miata factory links and provide the performance enthusiast the ability to set either front or rear sway bars to a "neutral position" while the chassis is at ride height to avoid pre-loading of the bar. The experienced enthusiast may wish to purposely "pre-load" the bar to create a specific handling characteristic to induce either a mild understeer or over steer condition. The CNC-machined aluminum end housings are fitted with urethane bushings to further reduce flexing - as compared to stock rubber bushing links. These links have been designed for use on the stock bar and all Racing Beat anti-roll bars.
(Each set contains two (2) links to serve one (1) sway bar. If you are putting them on the Front & Rear of a 90-97 you will need to purchase 2 sets.)
|,|||-||RACING-BEAT-MAZDA-MIATA-SWAY-BAR-END-LINKS-1990-1997-FRONT---REAR|,||,|Racing Beat Mazda Miata Sway Bar End Links 1990-1997 - Front & Rear|,|154-200|,|119.99|,|89.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Sway Bar End Links 1990-1997 - Front & Rear
Application: 1990-1997 Miata Front - Our popular Racing Beat-designed Miata sway bar end links are a direct swap with the Miata factory links for all 1990-1997 Miatas (front and rear) and provide the performance enthusiast the ability to set either front or rear Miata sway bars to a "neutral position" while the chassis is at ride height to avoid pre-loading of the bar. The experienced enthusiast may wish to purposely "pre-load" the sway bar to create a specific handling characteristic to induce either a mild understeer or oversteer condition.
Although the stock end links were well suited for use with the original Miata sway bar, installation of a stronger, stiffer aftermarket Miata sway bar may accelerate the end link wear. This is particularly true if you're still using the tired, old factory installed units.
The Racing Beat sway bar end links feature CNC-machined aluminum end housings and are fitted with urethane bushings to further reduce flexing - as compared to softer stock rubber bushing links. The end link mounting sleeve is fabricated from 4130 chrome moly steel tubing, then heat-treated during the manufacturing process to ensure superior strength and longevity. We prefer the use of our design as compared to the commonly used Heim-joint design due to the slightly more forgiving nature of the urethane components used. The urethane bushing material absorbs road vibration and harshness as compared with more rigid and unforgiving Heim-joint ball style ends. If you use your car as a daily-driven vehicle, in the long run we believe you'll appreciate the Racing Beat end links.
Each set contains two (2) complete end links to serve one (1) sway bar. These end links have been designed for use on the Mazda stock bar, all Racing Beat sway bars, and comparable aftermarket bars.
|,|||-||RACBEATSWAYB|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Sway Bar End Links 1999-2005 - Front|,|54201|,|109.99|,|89.70|,||,||,|0.000 |,||,|sdfgsdfg|,||,|Racing Beat Mazda Miata Sway Bar End Links 1999-2005 - Front
These Racing Beat Heavy Duty Sway Bar Links are designed specifically for the 1999-05 Miata (Front only). These end links provide the performance enthusiast the ability to set either front or rear sway bars to a neutral position while the chassis is at ride height to avoid pre-loading of the bar. The experienced enthusiast may wish to purposely pre-load the bar to create a specific handling characteristic to induce either a mild understeer or over steer condition. The CNC-machined aluminum end housings are fitted with urethane bushings to further reduce flexing - as compared to stock rubber bushing links. This kit contains the extra hardware that is necessary to connect these links to the sway bar and control arm bracket. Each set contains two (2) links to serve one (1) sway bar. A design change to the front lower control arm sway bar attachment points on the 1999 Miata chassis results in significant flexing of the lower control arm sway bar end link attachment bracket under hard cornering, possibly leading to premature failure of the bracket. The 90-97 Miata was designed with a U shaped end link attachment bracket on the lower control arm (LCA). The 1999 Miata was designed with an L shaped LCA attachment bracket.
Unfortunately, we do not believe that this L shaped bracket design will be adequate to handle the demands of a stiffer aftermarket sway bar. To remedy this shortcoming of the stock LCA bracket assemblies, we strongly recommend installation of the Lower Control Arm Reinforcement Flange Kit (Part No. 54111). While a minor welding effort is involved to install these reinforcement flanges, the benefits are worth the effort. After installation of these flanges, the stock end links cannot be reused.
Sway Bar End Links (Options):
1. The stock end links may be used with the Racing Beat Tubular Sway Bar if no modifications are made to the lower control arm end link attachment bracket.
2. The Racing Beat Tubular Sway Bar (or any other aftermarket sway bar) can be used with our Heavy Duty Sway Bar End Link Kit (Part No. 54201) if the modifications to the lower control arm attachment bracket have not been made. We strongly recommend the addition of the Lower Control Arm Reinforcement Flange Kit (Part No. 54111).
3. If the Lower Control Arm Reinforcement Flanges are added to the LCA attachment bracket, then our Heavy Duty Sway Bar End Link Kit (Part No. 154-201) MUST be used.
|,|||-||RACING-BEAT-MAZDA-MIATA-SWAY-BAR-END-LINKS-2000-2010-FRONT|,|20MAMISUANDS2|,|Racing Beat Mazda Miata Sway Bar End Links 2006-2010 - Front|,|54202|,|139.99|,|115.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Sway Bar End Links 2006-2010 - Front
Racing Beat Sway Bar End Link Set for all 2006-2011MX-5 and 2004-2011 RX-8 FRONT sway bar applications. These sway bar end links are direct replacements for the stock RX-8 and MX-5 end links. The Racing Beat sway bar end link set can is fully adjustable and can be used on both standard height and lowered vehicles. The ball-joint style link end is housed in a CNC-machined aluminum housing, offering silent, smooth operation combined with excellent durability and performance. Can be easily installed using only simple hand tools.
Comes complete with securing hardware and mounting instructions. Sold as a FRONT pair.
|,|||-||RACING-BEAT-MAZDA-MIATA-SWAY-BAR-END-LINKS-2006-2010-REAR|,|20MAMISUANDS2|,|Racing Beat Mazda Miata Sway Bar End Links 2006-2010 - Rear|,|54203|,|139.99|,|121.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda Miata Sway Bar End Links 2006-2010 - Rear
Racing Beat Sway Bar End Link Set for all 2006-2011MX-5 and 2004-2011 RX-8 REAR sway bar applications. These sway bar end links are direct replacements for the stock RX-8 and MX-5 end links. The Racing Beat sway bar end link set can is fully adjustable and can be used on both standard height and lowered vehicles. The ball-joint style link end is housed in a CNC-machined aluminum housing, offering silent, smooth operation combined with excellent durability and performance. Can be easily installed using only simple hand tools.
Comes complete with securing hardware and mounting instructions. Sold as a REAR pair.
|,|||-||RACBEATTUB121|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Mazda Miata Tubular Front Sway Bar 1999-2005|,|54103|,|269.99|,|229.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda Miata Tubular Front Sway Bar 1999-2005
Our testing has shown that each model of 2001 Miata that we have driven has shown a tendency to power “oversteer” at low speeds. The models tested include a base model with a 5-speed transmission, a LS model equipped with the 6-speed transmission and Sport Suspension package, and the LS model equipped with replacement KONI shocks.
Each car exhibited a tendency to oversteer at low speeds (under 40MPH) upon acceleration. Inquires with Mazda have failed to identify any changes to the 2001 Miata chassis that would account for this handling trait.
Our research has led us to develop this larger front sway bar for the 2001-02 Miata. The use of this larger bar (and retaining the stock rear bar) has neutralized most of this oversteer condition at low speeds, and allowed the Miata to exhibit a small amount of understeer at higher speeds. The use of the Racing Beat rear sway bar would negate the benefits this larger bar, and is not recommended This bar is 1.25” OD (3/16” wall) as compared to the 1999-00 bar of 1.125” (3/16” wall). Each bar is supplied with a heavy-duty, cast aluminum bar clamp, replacement urethane bushings, Prothane bushing grease, and detailed installation instructions. Manufactured by Racing Beat, every bar is designed with two endlink mounting holes and is finished with a bright red, durable powder-coat finish..
While the smaller 1.125” tubular bar can be used on the 2001-02 application, we recommend the use of the larger bar.
1999-00 Miata
The larger 1.25” bar will fit on the 1999-00 Miata, but is only recommended for experienced individuals that are seeking to alter the handling characteristics to suit a specific usage.
Due to the strength of the Racing Beat Tubular 1.25” Bar we strongly recommend the use of ALL of the following components with this bar. Failure to use these components may result in the damage to your suspension.
Lower Control Arm (LCA) Attachment Flange Kit
Starting with the 1999 Miata, Mazda made a change to the end link attachment bracket on the lower control arm. The 1990-97 Miata was produced with a U shaped end link LCA attachment bracket. The 1999-01 Miata is produced with a single-sided L shaped end link LCA attachment bracket. Our observations have led us to believe that this L shaped design may not be strong enough to handle the demands of a stronger aftermarket sway bar. We strongly recommend the addition of our Control Arm Reinforcement Flanges. This modification will convert the single-sided L bracket into a double-sided U bracket, and while this modification requires some minor welding, we believe this effort is highly worthwhile. After completion of this modification, the stock end links can no longer be used.
|,|"Select Mazda Miata Year" "1999-2000 1.125 Bar" "2001-2005 1.25 Bar add(+$20)"|-||-|||-||RACBEATTUBFR|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Racing Beat Mazda Miata Tubular Front Sway Bar 1990-1997|,|54104|,|229.99|,|206.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda Miata Tubular Front Sway Bar 1990-1997
This 1-1/8-inch OD bar (1/8-inch ID wall) is designed to improve the handling characteristics of your Miata for use on the street and track.
Racing Beat has refined 30 years of racing experience and undisputed successes into the design of our Miata suspension components. No other Miata aftermarket manufacturer can make this claim. From the MotorTrend Magazine (June, 1993) all-time slalom record (73.6 MPH) to our recent Sport Compact Car skidpad record (1.1g), Racing Beat suspension components have proven themselves where it counts, on the track. Don’t fall for the “hype” when others say their bars are the “best", look for the independent confirmation from the nation’s leading automotive publications.
Typically, a tubular bar is larger in diameter than a solid bar of the same rigidity. Even though a tubular bar may be larger in diameter than a smaller solid bar, the rigidity of both bars can be the same, but the tubular bar has the benefit of weight savings. By design, the Racing Beat tubular bar is substantially more rigid than the stock 3/4-inch bar, but this bar weighs just 5.5 lbs ! (As compared to the stock bar – 6 lbs.) This bar has been designed to be 1.3 times stronger than our solid sway bar.
|,|"For Mazda Miata Years" "1990-1993" "1994-1997"|-||-|||-||RACING-BEAT-MAZDA-MX-5-MIATA-FRONT-TUBULAR-SWAY-BAR-2006-2012|,|20MAMISUANDS2|,|Racing Beat Mazda MX-5 Miata Front Tubular Sway Bar 2006-2012|,|54108|,|269.99|,|231.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Front Tubular Sway Bar 2006-2012
One of the first steps a Miata owner can take to improve handling performance, without significantly hampering ride quality, is installing a balanced, front and rear, performance sway bar set. Racing Beat's in-house engineered sway bar sets for the MX-5 reduce chassis roll in turns and increase your car's sensitivity to steering inputs thereby resulting in improved maximum cornering power. Substantial engineering effort, select steel alloys, and precision manufacturing processes are combined to produce our top quality, peak performance suspension components.
For the MX-5 owner that might be considering their first suspension upgrade, the installation of set of sway bars make an ideal place to start. Although upgrading the springs and/or shocks on your MX-5 will also noticeably improve handling, these components can also degrade the ride quality depending on their intended performance levels.
Sway bars have two functions: First, they reduce body roll when turning, and they do this without simply raising the "two wheel" spring rate - that is, they do increase the wheel rate for a "one wheel" bump such as a pothole, but they do not change the "two wheel" rate for things like pavement joints. Although this may not sound significant, in practice, trying to restrict chassis roll with spring rates causes harsher ride characteristics than the same roll restriction with sway bars. There are a variety of reasons to restrict body roll. For one, the steering response to a turning input on the steering wheel is much crisper and clearer if the body doesn't have to roll at the start of the turn. For another, the angles with the pavement that develop as the wheels move up and down are often not ideal. By restricting these angles, more cornering power is usually available.
The second value of sway bars is that, by adjusting the stiffness of the front bar versus the rear, it is possible to change the understeer/oversteer/neutral steer characteristics of a car, making it easier to control and generally increasing cornering performance.
Racing Beat Front Sway Bar Specifications
The Racing Beat Tubular MX-5 Front Sway Bar, weighing only 7.5 lbs, is manufactured using 1" OD (25mm) x 3/16-inch wall DOM tubular steel, as compared to the .82" OD (21mm) Mazda stock sway bar. As calcuated by Racing Beat, this bar is 2.67 times stiffer than the stock bar. The Racing Beat Tubular MX-5 Front Sway Bar is provided with three (3) endlink mounting positions and is finished with a distinctive, red powder coating, providing a smooth, glossy protective layer. This Racing Beat sway bar is supplied with two powder-coated bushing retaining clamps, urethane bushings, Prothane bushing grease, and detailed installation instructions.
These Racing Beat sway bars feature a pair of urethane Stopper Bushings, secured with band-clamp retainers, serving as a preventative device against lateral movement of the sway bar during hard cornering. This simple and effective Stopper Bushing method effectively replicates the method used by Mazda on the stock bar.
|,|||-||54125|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Racing Beat Mazda MX-5 Miata Front Tubular Sway Bar 2016-2019|,|54125|,|265.00|,|236.00|,||,||,||,||,||,||,|Racing Beat Mazda MX-5 Miata Front Tubular Sway Bar 2016-2019
MX-5 ND Front Sway Bar - Tubular
Racing Beat's sway bars for the MX-5 ND offers you the ability to further tune your suspension to match additional suspension upgrades or to suit your particular driving style. It's well noted that Mazda designed the MX-5 ND with a noticable amount of body roll in an effort to enchance driver feel, but this amount of roll isn't best suited for high performance driving. Take back control of your MX-5 by upgrading both front and rear sway bars and flatten the car during cornering, improve tranisition speed, and increase cornering power.
The addition of a set of matched-set front and rear sway bars is an ideal way to dramatically improve the handling of your Miata without sacrificing ride overall ride quality. If you use your Miata primarily as a daily driven car with occasional trips to the track or your favorite mountain road, the Racing Beat bar combination is well-suited for your needs.
Racing Beat has refined 45 years of racing experience and undisputed successes into the design of our Miata suspension components. From a MotorTrend Magazine (RB 1990 Miata, June, 1993) all-time slalom record (73.6 MPH) to a Sport Compact Car (RB 1999 Miata ) skidpad record (1.1g), Racing Beat suspension components have proven themselves where it counts, on the track.
Specifications
Designed and manufactured in-house by Racing Beat, our history with Mazda aftermarket sway bar applications extends over four decades! The Racing Beat 1.125" OD tubular sway bar (.188" wall) is designed to improve the handling characteristics of your MX-5 for use on the street and track. By design, the Racing Beat MX-5 ND tubular bar is 3.39 times stiffer than the stock 23mm (.896") bar. Offered with three (3) end link mounting hole positions, the Racing Beat MX-5 ND sway bar can be further fine-tuned as required to alter the handling characteristics of the MX-5.
All Racing Beat sway bars are finished wih our distinctive red powder coating paint, which provides a smooth, glossy protective layer. Each bar comes supplied with replacement urethane bushings and clamps, lateral stopper bushings, a pack of specially designed bushing lubricant, and installation instructions. Actual MX-5 ND front bar shown in photo.
Combine this sway bar with the Racing Beat HD Sway Bar End Links to fully exploit the potential of your car's performance.
When adding high performance suspension components to any vehicle, the result is an increased demand on the vehicle's stock components. We have designed these high performance sway bar components to complement and further enhance your vehicle's performance. We strongly recommend you consider your specific driving requirements when upgrading your vehicle's suspension and select components accordingly.
|,|||-||RACING-BEAT-MAZDA-MX-5-MIATA-HD-SWAY-BAR-MOUNTING-BRACKETS-|,|20MAMISUANDS2|,|Racing Beat Mazda MX-5 Miata HD Sway Bar Mounting Brackets|,|54116|,|65.99|,|51.02|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata HD Sway Bar Mounting Brackets
Racing Beat has developed these Heavy Duty Sway Bar Mounting Brackets for use on both the RX-8 or MX-5 Racing Beat front sway bars. By welding a a pair of reinforcing gussets onto our standard mounts, this strengthening feature minimizes fore/aft movement of the sway bar mount. Additionally, this improvement minimizes the possibility of fatigue at the contact point between the bolt head and the bracket. Powder-coated to improve corrosion resistance, these brackets are easily installed with only basic hand tools.
Replacement bushings are available if needed.
Brackets are sold as a pair.
|,|||-||RABEPOPUMU20|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|Racing Beat Mazda MX-5 Miata Power Pulse Muffler 2006-2008|,|56472|,|589.99|,|528.00|,||,||,|15.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Power Pulse Muffler 2006-2008
If you’re like most Mazda MX-5 Miata enthusiasts, one of the first upgrades that you're likely to consider for your car is an upgraded exhaust system. For the earlier 1990-2005 Miata we found that many of the available exhaust systems on the market produced a modest upgrade in exhaust tone and quality as compared with the stock system. If you simply replaced the exhaust system with a typical bolt-on muffler and connecting-pipe section, depending on the internal design configurations, these systems might produce a near stock like exhaust tone, or a rather noisy, brash, in-your-face exhaust note.
With the introduction of the Mazda MX-5 Miata in 2006, many aftermarket exhaust manufacturers quickly set-out to produce an exhaust system. What everyone quickly discovered was that the 2.0-liter engine in the MX-5 Miata produced an exhaust level that was much different than the tone on the earlier engines! Early attempts at using components that were originally designed for these earlier engines were simply not up to the task of taming the rather unruly and loud tone of the exhaust of this engine.
The MX-5 Miata exhaust tone displayed characteristics very much unlike what we had observed on earlier applications. Our findings during early prototype testing revealed the following:
1. Upon lifting the throttle after hard acceleration, the engine produced a significant amount of exhaust noise during deceleration.
2. Low speed, low-to-medium RPM driving in 1st or 2nd gear through a parking lot produced a very pronounced "off throttle" exhaust note.
After extensive experimentation with several different muffler prototype configurations we reached the following conclusion - Mazda’s engineering team went to great lengths to silence the exhaust tone that this engine produced! Change any of the exhaust components to less restrictive, more free-flowing aftermarket components and you risk unleashing an obnoxiously loud, raspy, ear-splitting exhaust tone.
So, the challenge was to design a series of exhaust components for the MX-5 Miata that improved exhaust gas flow, provided a comfortable and reasonable exhaust tone, improved performance, and looked great.
Racing Beat’s Mazda MX-5 Miata Muffler
A simple and reasonable upgrade to the MX-5 Miata exhaust system is the replacement of the muffler section with an aftermarket unit. Our testing has shown that Mazda’s engineers did a very good job with the performance tuning of their muffler unit and squeezing any significant power gains through the use of an aftermarket exhaust is difficult. The Racing Beat team developed several different straight-through mufflers, chambered mufflers, and baffled mufflers in an attempt to optimize power gains, while moderating the “boomy” tones that prevailed under deceleration. We are confident the final system that we now offer has met these objectives and delivers an outstanding combination of quality sound, appearance, and performance. We designed our muffler to appeal to MX-5 Miata owners that drive their cars on a daily-basis and prefer a more mature, modest exhaust tone… yet will provide an aggressive "attitude" when you jump on the throttle!
Easy-to-install, this 304-stainless steel system features dual 3.5" OD tips and can be bolted to the car in minutes using the supplied hardware. The muffler is “cat-back” emissions legal and meets all California sound level requirements. This Racing Beat component is backed by our 1-Year Limited Warranty.
For MX-5 Miatas equipped with the factory installed Appearance Package or optionally installed Rear Air Dam. On this application, the rear valance requires that the muffler tips be extended rearward an addition 2.5". If you attempt to install a "standard" aftermarket muffler on a car fitted with this rear air dam, you'll end up melting your expensive air dam! Don't make this mistake, order the Racing Beat Appearance Package Muffler for your MX-5 Miata!
|,|"Shipping Cost" "add(+$98)"|-||-|||-||RACING-BEAT-MAZDA-MX-5-MIATA-POWER-PULSE-MUFFLER-2009-2013|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Racing Beat Mazda MX-5 Miata Power Pulse Muffler 2009-2017|,|56474|,|599.99|,|528.00|,||,||,|15.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Power Pulse Muffler 2009-2017
Power Pulse MX-5 Exhaust - If you're like most Miata MX-5 enthusiasts, one of the first upgrades that you're likely to consider for your car is an upgraded exhaust system. For the earlier 1990-2005 Miata we found that many of the available exhaust systems on the market produced a modest upgrade in exhaust tone and quality as compared with the stock system. If you simply replaced the exhaust system with a typical bolt-on muffler and connecting-pipe section, depending on the internal design configurations, these systems might produce a near stock like exhaust tone, or a rather noisy, brash, in-your-face exhaust note.
With the introduction of the MX-5 in 2006, many aftermarket exhaust manufacturers quickly set-out to produce an exhaust system. What everyone quickly discovered was that the 2.0-liter engine in the MX-5 produced an exhaust level that was much different than the tone on the earlier engines! Early attempts at using components that were originally designed for these earlier engines were simply not up to the task of taming the rather unruly and loud tone of the exhaust of this engine.
The MX-5 exhaust tone displayed characteristics very much unlike what we had observed on earlier applications. Our findings during early prototype testing revealed the following:
1. Upon lifting the throttle after hard acceleration, the engine produced a significant amount of exhaust noise during deceleration.
2. Low speed, low-to-medium RPM driving in 1st or 2nd gear through a parking lot produced a very pronounced "off throttle" exhaust note.
After extensive experimentation with several different muffler prototype configurations we reached the following conclusion - Mazda's engineering team went to great lengths to silence the exhaust tone that this engine produced! Change any of the exhaust components to less restrictive, more free-flowing aftermarket components and you risk unleashing an obnoxiously loud, raspy, ear-splitting exhaust tone.
So, the challenge was to design a series of exhaust components for the MX-5 that improved exhaust gas flow, provided a comfortable and reasonable exhaust tone, improved performance, and looked great.
Racing Beat's MX-5 Exhaust
A simple and reasonable upgrade to the MX-5 exhaust system is the replacement of the muffler section with an aftermarket unit. Our testing has shown that Mazda's engineers did a very good job with the performance tuning of their muffler unit and squeezing any significant power gains through the use of an aftermarket exhaust is difficult. The Racing Beat team developed several different straight-through mufflers, chambered mufflers, and baffled mufflers in an attempt to optimize power gains, while moderating the "boomy" tones that prevailed under deceleration. We are confident the final system that we now offer has met these objectives and delivers an outstanding combination of quality sound, appearance, and performance. We designed our muffler to appeal to MX-5 owners that drive their cars on a daily-basis and prefer a more mature, modest exhaust tone? yet will provide an aggressive "attitude" when you jump on the throttle!
Easy-to-install, the Racing Beat Power Pulse 304-stainless steel exhaust features dual 3.5" OD tips and can be bolted to the car in minutes using the supplied hardware. The muffler is "cat-back" emissions legal and meets all California sound level requirements. The Racing Beat MX-5 exhaust is backed by our 1-Year Limited Warranty.
|,|"Select Year" "Select Here" "2009-2015 (56474)" "2016-2017 (56475) add(+$28)"|-||-|"Shipping Cost" "add(+$98)"|-||-|||-||RACING-BEAT-MAZDA-MX-5-MIATA-POWER-PULSE-MUFFLER-2016-|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Racing Beat Mazda MX-5 Miata Power Pulse Muffler 2016-2024|,|56475|,|659.99|,|554.00|,||,||,|15.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Power Pulse Muffler 2016-2024
Racing Beat Power Pulse Exhaust - 2016-2024 MX-5 ND
The Racing Beat Power Pulse Exhaust for the MX-5 ND offers an exciting opportunity to experience the joys of the classic open-air driving experience. For over 25 years Racing Beat has been developing sport-tuned exhaust systems for the Miata/MX-5 application. Racing Beat exhaust components have been recognized by the aftermarket community as high-quality, great sounding, and beautifully-crafted performance upgrades for the Miata. Many of Racing Beat's exhaust components have debuted on Mazda's SEMA Show vehicles, making a statement to Racing Beat's name as a provider of high-quality and proven products.
Produced in Racing Beat's California manufacturing facility, the Power Pulse Exhaust features a MX-5 designed crimped-edge 304-stainless steel muffler canister, stainless steel inlet and outlet tubing, dual single-wall stainless steel tips with etched Racing Beat logos, hangers, and connecting flange. The muffler canister utilized features a straight-through split-Y internal design for optimum exhaust gas flow and includes a combination of stainless steel and high-temperature ceramic wool packing material for sound absorption. Racing Beat incorporates a Mazda-OE mounting flange on the inlet end of the exhaust to securely capture, retain and seal the stock donut-shaped swivel gasket. The stock mounting studs and retaining springs are retained for use with Racing Beat exhaust.
Weight Comparison
Stock system = 20.5 lbs
Racing Beat Power Pulse Muffler = 19 lbs
Hanger Assemblies – Keeping it Light
In keeping with the emphasis on the lightweight aspect of the MX-5 ND design principles, Racing Beat adopted a unique approach to the development of the extensive hanger assemblies that were required for this muffler. The ½” OD hangers on the stock MX-5 muffler posed an interesting challenge, if we used ½” OD hanger rod material for the Racing Beat hangers, these hanger assemblies would prove to be unnecessarily heavy. As an alternative, we used lighter 1/4" and 5/16” OD rod material for the lengthy hanger assemblies, and designed a unique ½” OD forged end hanger, which we then mated to the outlet end of each hanger assembly. The design of this hanger end ensures a secure "no slip" attachment with the stock rubber muffler hangers to prevent lateral movement of the exhaust during hard cornering.
|,|"Shipping Cost" "add(+$98)"|-||-|||-||RACING-BEAT-MAZDA-MX-5-MIATA-FRONT-SUSPENSION-SWAY-BAR-2006-2012|,|20MAMISUANDS2|,|Racing Beat Mazda MX-5 Miata RACE Front Suspension Sway Bar 2006-2015|,|14108|,|299.99|,|261.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Front Suspension Sway Bar 2006-2015
Applications: 2006-2015 MX-5 Miata - Front Sway Bar - Racing Beat-designed sway bars reduce chassis roll during cornering and increases your car's sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys, and precise manufacturing processes are combined to produce top performance components. As presently manufactured, this MX-5 Miata Tubular design utilizes a one-hole attachment point on either end. All Racing Beat sway bars are finished with a distinctive, red powder coating that provides a smooth, glossy protective layer. You can be assured of many years of superior handling performance with these proven bars!
MX-5 Miata Application
Although originally designed for the RX-8 application, this front bar can be used on a MX-5 Miata when a BIG front bar is required. As compared with the stock 21mm bar, the Racing Beat 32mm (1.25") front sway bar is a substantial upgrade over the stock bar. Each bar is supplied with replacement urethane bushings, bar clamps, and Prothane grease.
|,|||-||RACING-BEAT-MAZDA-MIATA-RACE-HEADER-WIRING-KIT-2006-2013|,|20MAMIEXGAAN|,|Racing Beat Mazda MX-5 Miata Race Header Wiring Kit 2006-2015|,|56004|,|89.99|,|70.02|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Race Header Wiring Kit 2006-2015
Racing Beat Mazda MX-5 Miata Race Header Wiring Kit - Installation of a header on a MX-5 Miata requires the removal of the primary catalytic converter that is incorporated into the stock exhaust manifold assembly. This stock manifold assembly has been equipped with two (2) sensor positions, one sensor before the primary catalytic converter (this unit is an air/fuel ratio sensor), and the second (an oxygen sensor) behind it.
To accommodate the reinstallation of these sensors, the Racing Beat MX-5 Miata header has been provided with two (2) sensor position fittings in the header primary tube collector. Since the oxygen sensor will now be reading the same oxygen levels as the air/fuel ratio sensor, the information that the oxygen sensor is providing to the ECU will result in an error code being triggered in the OBD II system, and the "check engine light" will illuminate.
Although the MX-5 Miata will continue to operate normally with the light illuminated (and an error code triggered), driving with the light illuminated may prevent detection of another engine related problem that may occur during the race event.
The Racing Beat MX-5 Miata Race Header Wiring Kit allows for the repositioning of the secondary oxygen sensor to an area behind the catalytic converter located in the mid-pipe unit of the MX-5 Miata. Once repositioned, this configuration will prevent an error code from being triggered. Relocating the oxygen sensor behind the secondary catalytic converter requires that the mid-pipe be removed from the car, a sensor hole be drilled (1/2-inch diameter) and a sensor nut be welded to the connecting pipe.
The Racing Beat Mazda MX-5 Miata Race Header Wiring Kit includes a stainless steel oxygen sensor mounting bung, plug, wiring extension, and step-by-step installation instructions. The wiring harness extension that we supply utilizes OEM electrical connectors and custom-made, high temperature Teflon-coated wire. (Note: This wiring extension features OEM connectors that are ONLY compatible for use with the secondary sensor.) This plug-in wire extension is hand-assembled by Racing Beat and is 100% compatible with the MX-5 Miata factory oxygen sensor connectors.
|,|||-||MAMIRAPRSCBY|,|MAZDA-MX-5-MIATA-MAINTENANCE-PARTS-AND-ACCESSORIES-2006-2012|,|Racing Beat Mazda MX-5 Miata Radiator Protective Screen 2006-2012|,|51530|,|109.99|,|78.00|,||,||,|0.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Radiator Protective Screen 2006-2012
Originally developed for use on the RX-8, we have adapted the Racing Beat radiator protective screen for use on the 2006 and later Mazda MX-5. Although Mazda positioned the radiator in a strategic position to allow maximum airflow, this positioning also allows potential damage from road debris!!
If you look through the large opening in the mouth of your MX-5, you will notice a radiator positioned at an approximately 45-degree angle. The positioning of this radiator left us feeling that this unit was a bit too "exposed" and we decided to design a protective screen to offer vital protection to this critical component.
Racing Beat has addressed this issue with a protective screen kit for the MX-5 application. This 304-grade stainless steel screen can be easily installed using only basic hand tools. The fine mesh screen material (.041 wire diameter which allows 63.2% open area flow through) is finished with a stainless steel frame to offer additional support and stability.
Each kit is supplied with all required mounting hardware and a set of our fully detailed, step-by-step instructions.
|,|||-||RACING-BEAT-MAZDA-MX-5-MIATA-REAR-SUSPENSION-SWAY-BAR-2006-2012|,|20MAMISUANDS2|,|Racing Beat Mazda MX-5 Miata Rear Suspension Sway Bar 2006-2012|,|14109|,|229.99|,|202.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Rear Suspension Sway Bar 2006-2012
Applications: 2006-2012 MX-5 Miata - Rear Sway Bar - Racing Beat-designed sway bars reduce chassis roll during cornering and increases your car's sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys, and precise manufacturing processes are combined to produce top performance components. As presently manufactured, this MX-5 Miata Tubular design utilizes a one-hole attachment point on either end. All Racing Beat sway bars are finished with a distinctive, red powder coating that provides a smooth, glossy protective layer. You can be assured of many years of superior handling performance with these proven bars!
MX-5 Miata Application
Although originally designed for the RX-8 application, this rear bar can be used on a MX-5 when a large rear bar is needed to pair up with a front bar. Designed specifically as a matched component for our large 1.25" OD (32mm) front bar, each bar is supplied with replacement urethane bushings, bar clamps, and Prothane grease.
|,|||-||RACING-BEAT-MAZDA-MX-5-MIATA-REAR-TUBULAR-SWAY-BAR-2006-2012|,|20MAMISUANDS2|,|Racing Beat Mazda MX-5 Miata Rear Tubular Sway Bar 2006-2012|,|54109|,|229.99|,|191.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Rear Tubular Sway Bar 2006-2012
Designed by Racing Beat as the companion bar for our MX-5 Front Sway bar, this rear bar can be matched with our front bar for a variety of street or race uses.
Specifications
The Racing Beat Tubular MX-5 Rear Sway Bar, weighing only 5 lbs, is manufactured using .75" OD (19mm) x 3/32-inch wall, 4130 chrome-moly tubular steel, as compared to the .43" OD (11mm) Mazda stock sway bar (or 12mm Sport Suspension bar). As calcuated by Racing Beat, this bar is 6.2 times stiffer than the 11mm stock bar and 4.4 times as stiff as the 12mm bar. The Racing Beat Tubular MX-5 Rear Sway Bar is designed with two (2) endlink mounting positions and is finished with a distinctive, red powder coating, providing a smooth, glossy protective layer. Racing Beat sway bars are supplied with urethane bushings, Prothane bushing grease, and detailed installation instructions.
These Racing Beat sway bars feature a pair of urethane Stopper Bushings, secured with band clamp retainers, serving as a preventative device against lateral movement of the sway bar during hard cornering. This simple and effective Stopper Bushing method effectively replicates the method used by Mazda on the stock bar.
|,|||-||54126|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2016|,|Racing Beat Mazda MX-5 Miata Rear Tubular Sway Bar 2016-2019|,|54126|,|219.00|,|191.00|,||,||,||,||,||,||,|Racing Beat Mazda MX-5 Miata Rear Tubular Sway Bar 2016-2019
MX-5 ND Rear Sway Bar - Tubular
Racing Beat's tubular rear sway bar for the MX-5 ND has been designed as a matched-component for use with our ND front bar. Designed and manufactured by Racing Beat, the stiffness of this bar is 3.7 times greater than the stock .433" OD stock bar.
Specifications
The diameter of the Racing Beat tubular rear bar is 5/8" OD x .188" wall, weighs 2.6 lbs. (Stock comparison: 2.2 lbs.) and features three (3) end link attachment holes. Each sway bar is supplied with replacement urethane bushings and clamps, lateral bar stopper bushings, lubricating grease, and detailed installation instructions. Actual MX-5 ND rear bar shown in photo.
When adding high performance suspension components to any vehicle, the result is an increased demand on the vehicle's stock components. We have designed these high performance sway bar components to complement and further enhance your vehicle's performance. We strongly recommend you consider your specific driving requirements when upgrading your vehicle's suspension and select components accordingly.
Shipping Note:
When ordering a front and rear bar combination, we'll place BOTH bars in the same box. You'll only be charged shipping for ONE item.
|,|||-||RACING-BEAT-MAZDA-MX-5-MIATA-SPORT-RACE-MUFFLER-2016|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Racing Beat Mazda MX-5 Miata Sport/Race Muffler 2016-2024|,|56476|,|489.99|,|425.02|,||,||,|15.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Sport/Race Muffler 2016-2024
Racing Beat Sport/Race Exhaust - 2016-2024 MX-5 ND
The Racing Beat Sport/Race Exhaust for the MX-5 ND offers an equal-part combination of enthusiastic fun and rebellious spirit. For over 25 years Racing Beat has been developing and providing sport-tuned exhaust systems for the Miata/MX-5 application. Racing Beat exhaust components have been recognized by the aftermarket community as high-quality, great sounding, and beautifully-crafted performance upgrades for the Miata. Many of Racing Beat's exhaust components have debuted on Mazda's SEMA Show vehicles, making a statement to Racing Beat's name as a provider of high-quality and proven products.
Sport Tuned Simplicity
Inspired to encompass the true MX-5 driving experience, the Racing Beat Sport/Race Exhaust has been designed to provide an aggressive and exciting exhaust note throughout the entire RPM range. No mechanical gimmicks, valves, tip inserts, etc.. are needed to unleash or dampen the character of the Racing Beat Sport/Race Exhaust; this exhaust will appeal to the true MX-5 motoring enthusiast. True to the ideals of racing principles, we've stripped this exhaust down to only the most critical elements in an attempt to strip away unwanted excess weight.
Produced in Racing Beat's California manufacturing facility, the Sport/Race Exhaust features a MX-5-designed 304-stainless steel muffler canister, inlet and outlet tubing, single-wall tip (with etched Racing Beat logo), attachment hangers, and connecting flange. The muffler canister utilized features a straight-through design for optimum exhaust gas flow and includes a combination of stainless steel and high-temperature ceramic wool packing material for sound absorption. Racing Beat incorporated a Mazda-OE mounting flange on the inlet end of the exhaust to securely capture, retain and seal the stock donut-shaped swivel gasket. The stock mounting studs and retaining springs are retained for use with Racing Beat exhaust.
Weight Savings
Stock system = 20.5 lbs
Racing Beat Race Muffler = 13.75 lbs
This is a 33% reduction in weight over the stock system!
Hanger Assemblies – Keeping it Light
In keeping with the emphasis on the lightweight aspect of the MX-5 ND design principles, Racing Beat adopted a unique approach to the development of the extensive hanger assemblies that were required for this muffler. The ½” OD hangers on the stock MX-5 muffler posed an interesting challenge, if we used ½” OD hanger rod material for the Racing Beat hangers, these hanger assemblies would prove to be unnecessarily heavy. As an alternative, we used lighter 5/16” OD rod material for the lengthy hanger assemblies, and designed a unique ½” OD forged end hanger, which we then mated to the outlet end of each hanger assembly. The design of this hanger end ensures a secure "no slip" attachment with the stock rubber muffler hangers to prevent lateral movement of the exhaust during hard cornering.
|,|"Shipping Cost" "add(+$98)"|-||-|||-||RABESUSP|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-2006-2012|,|Racing Beat Mazda MX-5 Miata Suspension Spring Set 2006-2009|,|54086|,|289.99|,|249.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Suspension Spring Set 2006-2009 - Set of Four
Racing Beat has designed suspension coil springs for the MX-5 Miata that are suitable for street or track use. This complete set of front and rear suspension springs were designed specifically for the MX-5 Miata by Racing Beat’s engineering staff. Ideally suited for use with the stock Mazda shocks the Racing Beat springs will interchange exactly with the stock springs.
These springs have been designed with a rate increase of approximately 25% (front - 145 lb/in) and 25% (rear - 112 lb/in) with a modest drop of .5-inch (front & rear). (As compared to a Miata equipped with a manual transmission.)
Jim Mederer, Racing Beat’s chief engineer, shares his design philosophy with regards to the development of suspension springs as follows. "Springs are very much a matter of opinion, I adjust ride height and spring rate based more than on any other thing, my taste. We won't excessively lower a car to obtain a "look". First the car will hit the bump rubbers far too often and that makes the car unpredictable in its handling, also it makes it harsh and it is very hard on suspension components causing them to potentially fail. We therefore make relatively small changes in ride height, usually less than 1", depending on the application. We adjust that based in part on what we perceive the best way of adjusting for good handling."
"Our primary goal in lowering the car is handling, and from our point a view, improved appearance is a side benefit. We don’t lower the car for appearance, and then take what comes in handling. We are very cautious to not excessively lower the car such that it will cause perceived problems either in safety, excessive tire wear, or unreasonable changes in ride comfort."
|,|||-||RACING-BEAT-MAZDA-MX-5-MIATA-TUBULAR-SWAY-BAR-PACKAGE-2006-2012|,|20MAMISUANDS2|,|Racing Beat Mazda MX-5 Miata Tubular Sway Bar Package 2006-2012|,|SuspensionPackageMX5Sway|,|490.00|,|434.00|,||,||,|5.000 |,||,||,||,|Racing Beat Mazda MX-5 Miata Tubular Sway Bar Package 2006-2012
Sway bar set for 2006-2012 MX-5 - Racing Beat-designed tubular sway bars reduce chassis roll during cornering and increases your car's sensitivity to steering inputs, thereby improving maximum cornering power. Substantial engineering effort, select steel alloys, and precise manufacturing processes are combined to produce top performance components.
The Racing Beat Tubular MX-5 Front Sway Bar, weighing only 7.5 lbs, is manufactured using 1" OD (25mm) x 3/16-inch wall DOM tubular steel, as compared to the .82" OD (21mm) Mazda stock sway bar. As calcuated by Racing Beat, this bar is 2.67 times stiffer than the stock bar. The Racing Beat Tubular MX-5 Front Sway Bar is provided with three (3) endlink mounting positions.
The Racing Beat Tubular MX-5 Rear Sway Bar, weighing only 5 lbs, is manufactured using .75" OD (19mm) x 3/32-inch wall, 4130 chrome-moly tubular steel, as compared to the .43" OD (11mm) Mazda stock sway bar (or 12mm Sport Suspension bar). As calcuated by Racing Beat, this bar is 6.2 times stiffer than the 11mm stock bar and 4.4 times as stiff as the 12mm bar. The Racing Beat Tubular MX-5 Rear Sway Bar is designed with two (2) endlink mounting positions.
Racing Beat has incorporated 30 years of racing experience in the design of our suspension products. All of our suspension components are designed by Racing Beat exclusively for the Miata and will improve the handling of your car dramatically.
The Racing Beat Sway bar set includes:
Tubular Front Sway Bar
Tubular Rear Sway Bar
Racing Beat sway bars are supplied with urethane bushings, Prothane bushing grease, and detailed installation instructions.
Made in the USA Made in the USA by Racing Beat, Inc.
|,|||-||RABEMXMICOFO|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-2006-2012|,|Racing Beat MX-5 Miata Cold Force Intake Kit - Victory White 2006-2012|,|56509|,|485.00|,|433.39|,||,||,|0.000 |,||,||,||,|Racing Beat Cold Force MX-5 Intake Kit for years 2006-2012
Racing Beat introduces the Cold Force Intake for the MX-5 Miata. Designed to utilize the full benefit of a cold air ram effect, the Cold Force Intake System allows pressurized, cooler ambient air to enter the intake system. Each CF High Flow system includes: a machined-aluminum mass air follow sensor housing, power-coated intake tube, high density plastic ram air duct, a genuine, custom-engineered K&N air filter element, complete mounting hardware, and fully detailed installation instructions. Select this link for a larger photo.
The high-density ram air inlet duct is securely housed behind the front bumper and is positioned to draw forced-air through the MX-5’s main grill opening. Housed firmly inside the ram air inlet duct is a full-length K&N filter element, which attaches to the sturdy intake tube to direct air to the mass airflow senor. The passageway through which the intake tube enters the engine compartment is tightly sealed with a triple-wall neoprene foam gasket. The machined-aluminum MAF housing positions the critical MAF sensor precisely in the airflow path for accurate monitoring.
Like all Racing Beat intake systems, we include a genuine K&N air filter element with the Cold Force Intake System. We are often asked why we offer the K&N unit when other "cheaper" filters are available. While there are certainly other "cheaper" and less expensive filters available, our remarkable success with the K&N brand, combined with their strong brand awareness, customer support, and a reliable, high quality product, makes the selection of the K&N filter a very logical choice! All K&N filters can be cleaned and reused almost indefinitely with the K&N Filtercharger Kit, available separately.
Each kit comes complete with all required mounting hardware and can be installed by the week-end mechanic, using only simple hand tools. Fully detailed and illustrated installation instructions are included to guide you step-by-step through the installation process. If you need additional assistance with the installation, just give us a call and we will be happy to assist you!
The Racing Beat Cold Force Intake System is backed by our 1-Year Limited Warranty.
|,|||-||RACING-BEAT-MX-5-MIATA-EXHAUST-FLANGE-STAINLESS-STEEL-2-5-INCH-ID|,|20MAMIEXGAAN|,|Racing Beat MX-5 Miata Exhaust Flange - Stainless Steel 2.5 inch ID|,|16173|,|49.99|,|38.02|,||,||,|0.000 |,||,||,||,|Racing Beat MX-5 Miata Exhaust Flange - Stainless Steel 2.5 inch ID
We offer this cast-stainless steel 2.5" ID flange for use in many custom applications. This flange measures 12mm" thick (.5"), has 13.5mm" diameter mounting holes spaced 100mm (approx 3.93") apart (from center-to-center). Uses 2.5" ID gasket.
|,|||-||RABEMXRACOPI1|,|20MAMIEXHECO|,|Racing Beat MX-5 Miata Race Connecting Pipe 2006-2015|,|RCB-56440|,|339.95|,|274.00|,||,||,|0.000 |,||,||,||,|
Racing Beat MX-5 Miata Race Connecting Pipe 2006-2015
*Manual Transmission ONLY
The Racing Beat Race Connecting Pipe is intended to replace the stock mid-pipe on the MX-5 Miata, thereby eliminating the integrated secondary catalytic converter and presilencer unit.
Manufactured using 16-gauge, 2.375-inch OD stainless steel tubing, this connecting pipe features mandrel bends and OEM style connecting flanges. Designed as a bolt-on component, this connecting pipe is easy to install and utilizes all existing mounting brackets and hangers.
Emissions Note: The stock mid-pipe does not feature an oxygen sensor after the catalytic converter. (The oxygen sensors in the MX-5 Miata exhaust system are located before and after the primary catalytic converter, which is located under the stock exhaust manifold near the engine.) Therefore, installation of this race connecting pipe will not impact the OBD II system and installation of this race pipe will not cause a “check engine” light to occur. However, since a factory-placed catalytic converter is being removed by the install of this component, this race pipe is NOT considered emissions legal for street use.
*This component is legal only for racing vehicles, which may never be used upon a highway.
|,|"Shipping Cost" "add(+$85)"|-||-|||-||RABEMXRACOPI|,|20MAMIEXHECO|,|Racing Beat MX-5 Miata Race Connecting Pipe With Silencer 2006-2015|,|RCB-56441|,|485.00|,|375.00|,||,||,|0.000 |,||,||,||,|Racing Beat MX-5 Miata Race Connecting Pipe With Silencer 2006-2015
*Manual Transmission ONLY
The Racing Beat MX-5 Miata Race Connecting Pipe (with presilencer) is intended to replace the stock mid-pipe on the MX-5 Miata, thereby eliminating the integrated secondary catalytic converter and presilencer unit. The inclusion of the presilencer unit on the Racing Beat MX-5 Miata Race Connecting Pipe moderates the exhaust note to provide an aggressive exhaust tone, with a noticeable increase in sound over the stock exhaust system. If you prefer a much louder-than-stock exhaust tone, we also offer our Race Connecting Pipe without the presilencer unit. For dyno result information for the Racing Beat MX-5 Header and Race Connecting Pipe unit.
Manufactured using 16-gauge, 2.375-inch OD stainless steel tubing, this connecting pipe features mandrel bends and OEM style connecting flanges. Designed as a bolt-on component, this connecting pipe is easy to install and utilizes all existing mounting brackets and hangers. For a larger photo of this connecting pipe, follow this link.
Emissions Note: The stock mid-pipe does not feature an oxygen sensor after the catalytic converter. (The oxygen sensors in the MX-5 Miata exhaust system are located before and after the primary catalytic converter, which is located under the stock exhaust manifold near the engine.) Therefore, installation of this race connecting pipe will not impact the OBD II system and installation of this race pipe will not cause a “check engine” light to occur. However, since a factory-placed catalytic converter is being removed by the install of this component, this race pipe is NOT considered emissions legal for street use.
|,|"Shipping Cost" "add(+$85)"|-||-|||-||RABEMXRAHE20|,|20MAMIEXHECO|,|Racing Beat MX-5 Miata Race Header 2006-2015|,|56010|,|689.99|,|579.00|,||,||,|0.000 |,||,||,||,|Racing Beat MX-5 Miata Race Header 2006-2015
MX-5 Miata Racing Beat Race Header (Manual & Auto Trans Models) - Upgrading your exhaust system with a high efficiency MX-5 Miata exhaust header is a time-proven method to improve the gas flow from your engine. Although modern exhaust manifolds have improved dramatically over the years, and may in fact resemble a traditional header in shape, testing has proven that performance improvements can be obtained with continued refinement of the exhaust manifold design. While the automotive aftermarket might we focusing their efforts solely on performance improvements, the OE manufacturers must combine performance, emissions, sound level limitations, and extended durability factors in their designs. While these parameters are also of concern to the aftermarket, our primary focus directed to maximizing performance.
The Racing Beat MX-5 Miata exhaust header that we offer was initially developed by the request of Mazda's R&D team for inclusion on a early prototype MX-5 which was to be introduced prior to the general release of the vehicle. This showcase MX-5 Miata was displayed at car shows during the introduction phase of the then new 2006 MX-5 Miata at various shows and events around the US. (You may remember this MX-5 Miata with its distinctive "green and orange" 787B Le Mans color scheme.)
Manufactured entirely from 304-stainless steel to provide both outstanding durability and a stunning appearance, the Racing Beat 4-to-1 configured header is designed to offer the MX-5 Miata owner noticeable performance gains. Our exclusive, cast stainless-steel engine-to-header flange features specially designed exhaust ports that transition smoothly to the primary tubing. Large diameter 1.7" OD tubing has been used for the primary tubing, collecting into a specially configured collector assembly. Exhaust gas exits the header through an genuine Mazda OEM stainless-steel rear flange, mating to the factory connecting pipe section.
Development & Tuning
Developed in-house by Racing Beat, this MX-5 Miata header underwent several on-chassis dyno test tuning sessions to determine specific tubing lengths, collector configurations, and optimum tubing positions. For race applications, combine the Racing Beat header with a Race Connecting Pipe (with presilencer unit) for additional performance.
Emissions
The installation of a header on a federal or California emissions equipped MX-5 Miata requires the removal of the primary catalytic converter unit. However, the secondary catalytic converter incorporated into the mid-pipe section (aft of the header section) is retained. Since a factory-placed catalytic converter is being removed by the install of this component, this race header is NOT considered emissions legal for street use. Both primary and secondary oxygen sensors are retained and are relocated into the header outlet collector. (Although this configuration will not affect engine performance, it is possible that this configuration will trigger an error code with the OBDII system and illuminate the "check engine light" on the vehicle.) To avoid this from occurring, we offer an optional Race Header Wiring Kit that relocates the secondary oxygen sensor.
Installation
Each Racing Beat MX-5 Miata header kit comes complete with detailed installation instructions and a plug-in OEM style electrical extension wire for the repositioning of the primary oxygen sensor. The stock engine-to-header gasket can be reused if there are no visible signs of distress or wear. (Mazda utilizes a heavy-duty metal gasket, which we have found can be reused several times.)
|,|"Shipping Cost" "add(+$85)"|-||-|||-||RACING-BEAT-MX-5-MIATA-SWIVEL-GASKET-MULTI-APPLICATION-|,|20MAMIEXGAAN|,|Racing Beat MX-5 Miata Swivel Gasket 2006-2010 (Multi-Application)|,|16336|,|29.99|,|22.85|,||,||,|0.000 |,||,||,||,|Racing Beat MX-5 Miata Swivel Gasket 2006-2010 (Multi-Application)
Swivel Connection Ring Gasket - This replacement gasket is used on Mazda's OE style flanges that incorporate a swivel-style pipe exhaust pipe connection. These joints are typically found at the outlet end of the stock downpipe section, just behind the primary catalytic converter or front pipe section. These connections incorporate a series of mounting studs and retaining springs which allow the two pipe sections to pivot and flex with the movement of the engine or chassis.
This replacement gasket can be used in place of the stock Mazda gasket. While these gaskets sell for over $45.00 from your local dealer, we offer the exact same component at a much reduced price. While these gaskets should last many years, these gaskets may become difficult to remove during an exhaust upgrade project and damage to the brittle gasket material may occur.
|,|||-||RACING-BEAT-POWER-PULSE-DUAL-OUTLET-MIATA-MUFFLER-AUTO-TRANS-1999-2003|,|19MAMIEXSYMU1|,|Racing Beat Power Pulse Dual Outlet Miata Muffler - Auto Trans 1999-2003|,|56470|,|609.99|,|516.00|,||,||,|8.000 |,||,||,||,|Racing Beat Power Pulse Dual Outlet Miata Muffler - Auto Trans 1999-2003
Our Racing Beat Power Pulse Dual Outlet Exhaust project was originally started after a request by Mazda USA for a prototype system for use on one of their project Miatas. Reaction was very positive and we soon included this exhaust system into our Racing Beat line-up.
The Racing Beat Dual Outlet Muffler for the 1999-2003 Miata (automatic transmission) is produced entirely from 304-stainless steel for superior durability and appearance. The inlet tube features a thick, cast-stainless steel flange which provides excellent gas sealing capabilities. Each stainless steel outlet tube feeds into a double-walled tip for an aggressive and sporty look. The two 3.5" OD exhaust tips are manufactured using highly polished 304-stainless steel and are slightly oval in shape to provide a perfect balance and proportional fit with the Miata's rear bumper. Each tip features a etched Racing Beat logo to add the finishing touch! Like all Racing Beat exhaust components, this system has been tuned to provide the Miata with a deep, throaty exhaust note - without any harsh, buzzy or "raspy" sounds.
Each Power Pulse system comes complete with fully detailed instructions and mounting hardware, and can be easily installed by the weekend mechanic using only simple hand tools. A positioning template is provided to assist with cutting of the new opening for the additional outlet tip. The new opening can be cut through the soft urethane bumper material using only a small utility knife. A small sanding block is then required to smooth out the opening to the final shape.
This exhaust is "cat-back" emissions legal and meets California sound level requirements.
Muffler Fitment on Auto Transmission Models
Due to discrepancies with regards to the mounting flange bolt-hole spacing on automatic transmission cars, we are suggesting that you measure the flange bolt-hole spacing on your current muffler prior to placing an order. (Why Mazda decided to use a different flange on some AT versions has left us baffled! Sorry for the extra work required to determine the correct exhaust for your application, but we'd rather have you order the correct muffler and avoid the hassles and expense of returning the wrong part.) If you have any questions about these measurements, please give us a call for assistance.
We request that you measure the flange bolt-hole spacing on your car to confirm that you will be obtaining the correct muffler for your application. The measurement of concern is the spacing of the bolt holes on the flange between the muffler and the connecting pipe section.
Note your measurements as follows:
Automatic Transmission = 3.46" (88mm) center-to-center
Manual Transmission = 4.33" (110mm) center-to-center
- If your measurements match the specifications for "Auto Transmission", then you have selected the correct product listing.
- If your measurements match the specifications for "Manual Transmission", then you will order Power Pulse Dual Exhaust (Part number 56467).
Assembled in the USA by Racing Beat, Inc.
|,|"Shipping Cost" "add(+$104)"|-||-|||-||RABEPOPUMIMU|,|20MAMIEXREPA|,|Racing Beat Power Pulse Miata Muffler With Appearance Package 2006-2015 |,|56473|,|599.99|,|528.00|,||,||,|5.000 |,||,||,||,|Racing Beat Power Pulse Miata Muffler With Appearance Package 2006-2015
Mazda MX-5 Miata Stainless Steel Power Pulse Muffler (For cars equipped with the Mazda Factory Appearance Package or optional Dealer Accessory Rear Bumper Skirt) - This Mazda MX-5 Miata Power Pulse Muffler is designed specifically for Miatas equipped the factory installed Appearance Package or optionally installed Rear Bumper Skirt. On these applications, the rear valance design requires that the muffler tips be extended rearward an addition 2.5". If you attempt to install a "standard" aftermarket muffler on a car fitted with these Mazda components, you make risk damaging your bumper due to the heat from the exhaust! Don't make this mistake, order the Racing Beat Appearance Package Muffler for your MX-5 Miata!
If you're like most Mazda MX-5 Miata enthusiasts, one of the first upgrades that you're likely to consider for your car is an upgraded exhaust system. For the earlier 1990-2005 Miata we found that many of the available exhaust systems on the market produced a modest upgrade in exhaust tone and quality as compared with the stock system. If you simply replaced the exhaust system with a typical bolt-on muffler and connecting-pipe section, depending on the internal design configurations, these systems might produce a near stock like exhaust tone, or a rather noisy, brash, in-your-face exhaust note.
|,|"Shipping Cost" "add(+$98)"|-||-|||-||56478|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|Racing Beat Sport/Race MX-5 Exhaust MX-5 - Brembo Equipped with Rear Diffuser 2016-2024|,|56478|,|495.00|,|425.00|,||,||,||,||,||,||,|Racing Beat Sport/Race MX-5 Exhaust MX-5 - Brembo Equipped with Rear Diffuser 2016-2024
Racing Beat Sport/Race Exhaust - 2016-2024 MX-5 ND
(Brembo/Appearance Package equipped models)
The Racing Beat Sport/Race Exhaust for the MX-5 ND offers an equal-part combination of enthusiastic fun and rebellious spirit. For over 25 years Racing Beat has been developing and providing sport-tuned exhaust systems for the Miata/MX-5 application. Racing Beat exhaust components have been recognized by the aftermarket community as high-quality, great sounding, and beautifully-crafted performance upgrades for the Miata. Many of Racing Beat's exhaust components have debuted on Mazda's SEMA Show vehicles, making a statement to Racing Beat's name as a provider of high-quality and proven products.
Sport Tuned Simplicity
Inspired to encompass the true MX-5 driving experience, the Racing Beat Sport/Race Exhaust has been designed to provide an aggressive and exciting exhaust note throughout the entire RPM range. No mechanical gimmicks, valves, tip inserts, etc.. are needed to unleash or dampen the character of the Racing Beat Sport/Race Exhaust; this exhaust will appeal to the true MX-5 motoring enthusiast. True to the ideals of racing principles, we've stripped this exhaust down to only the most critical elements in an attempt to strip away unwanted excess weight.
Produced in Racing Beat's California manufacturing facility, the Sport/Race Exhaust features a MX-5-designed 304-stainless steel muffler canister, inlet and outlet tubing, single-wall tip (with etched Racing Beat logo), attachment hangers, and connecting flange. The muffler canister utilized features a straight-through design for optimum exhaust gas flow and includes a combination of stainless steel and high-temperature ceramic wool packing material for sound absorption. Racing Beat incorporated a Mazda-OE mounting flange on the inlet end of the exhaust to securely capture, retain and seal the stock donut-shaped swivel gasket. The stock mounting studs and retaining springs are retained for use with Racing Beat exhaust.
Weight Savings
Stock system = 20.5 lbs
Racing Beat Race Muffler = 13.75 lbs
This is a 33% reduction in weight over the stock system!
Hanger Assemblies – Keeping it Light
In keeping with the emphasis on the lightweight aspect of the MX-5 ND design principles, Racing Beat adopted a unique approach to the development of the extensive hanger assemblies that were required for this muffler. The ½” OD hangers on the stock MX-5 muffler posed an interesting challenge, if we used ½” OD hanger rod material for the Racing Beat hangers, these hanger assemblies would prove to be unnecessarily heavy. As an alternative, we used lighter 5/16” OD rod material for the lengthy hanger assemblies, and designed a unique ½” OD forged end hanger, which we then mated to the outlet end of each hanger assembly. The design of this hanger end ensures a secure "no slip" attachment with the stock rubber muffler hangers to prevent lateral movement of the exhaust during hard cornering.
|,|"Shipping Cost" "add(+$95)"|-||-|||-||RACBEATSTREA|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Racing Beat Streamline Mazda Miata Rear Deck Cover 1990-1997|,|57103|,|709.99|,|610.00|,||,||,|5.000 |,||,|sdfsdf|,||,|Racing Beat Streamline Mazda Miata Rear Deck Cover 1990-1997
The Streamline - 3 Piece Rear Deck Cover for the 1990-97 Miata, adds a clean, graceful touch and eliminates the saggy look stock vinyl cover, while reducing wind buffeting. The cover provides a “wind-blocker” benefit and reduces some of the wind buffeting that funnels down between the seats.
Our unique mounting design eliminates the need for any modifications to the chassis, thereby allowing quick installation or removal. Storm clouds appearing on the horizon? Not to worry! Simply pull to the side of the road and disassemble the top into (3) pieces for storage on the rear deck shelf (with the top in the upright position) of your Miata. We offer an optional storage bag that safely secures these separate pieces.
The cover can be stored off the car as an assembled unit. Taking a long weekend trip? Before raising the top for the night, the assembled cover can be placed inside the car for short-term storage.
Manufactured from hand-laid fiberglass mat and easily prepped for final painting. This cover will function without interfering with the Racing Beat Type I & II Style Bars or the Mazda factory mid-chassis brace. This cover is not functional with the Type V Style Bar or any roll bar with a rear diagonal brace.
Due to the size of this item additional shipping charges will be reflected in your total at checkout.
|,|"Shipping Cost" "add(+$139)"|-||-|||-||RACBEATSTREA1|,|NBACCESSORIES|,|Racing Beat Streamline Mazda Miata Rear Deck Cover 1999-2005|,|57131|,|719.99|,|624.00|,||,||,|5.000 |,||,|sdfsgsdfg|,||,|Racing Beat Streamline Mazda Miata Rear Deck Cover 1999-2005
Now available is the 3-Piece Streamline Deck Cover for the 1999-2005 Mazda Miata. This cover features slightly higher “humps” than the 1990-1997 Miata version.
This new design features two attractive “aero” humps to allow for the operation of the soft top. The deck cover adds a clean, graceful touch and eliminates the saggy look stock vinyl cover, while reducing wind buffeting. The cover provides a “wind-blocker” benefit and reduces some of the wind buffeting that funnels down between the seats.
Manufactured using hand-laid fiberglass, each cover is ready for final sanding and paint prep. The cover is securely held in place using the hard top securing bolts and tonneau cover attachment points. Our unique mounting design eliminates the need for any modifications to the chassis, thereby allowing quick installation or removal.
The cover can be stored off the car as an assembled unit. Taking a long weekend trip? Before raising the top for the night, the assembled cover can be placed inside the car for short-term storage. In a wet weather emergency, the cover can be disassembled and placed in the trunk. We offer an optional storage bag to protect your disassembled cover. (Note: The basic dimensions of our deck cover have been the same since it was introduced several years ago. With each new release of the Miata, Mazda has changed the inside dimensions and design of the trunk. What was a “comfortable” fit in the 1990-1997 Miata has become a “very tight” fit on the 1999-2005 Miata. As shown above, the disassembled cover has been placed inside a 2001 Miata trunk.(Storage bag shown in picture no longer available)
Manufactured from hand-laid fiberglass mat and easily prepped for final painting. This cover will function without interfering with the Racing Beat Type I & II Style Bars or the Mazda factory installed wind blocker unit. This cover is not functional with the Type V Style Bar or any roll bar with a rear diagonal brace.
|,|"Shipping Cost" "add(+$139)"|-||-|||-||RABERESWBARB|,|19MAMISUANDS|,|Racing Beat Sway Bar Bushing 7/8-inch ID Diameter|,|96008|,|9.99|,|8.45|,||,||,|0.000 |,||,||,||,|Racing Beat Sway Bar Bushing 7/8-inch ID Diameter
These urethane bushings can be used to replace a set of worn-out original units. These bushings are offered as direct replacements for the bushings that were originally supplied with your Racing Beat sway bar. Check the chart below for your specific application and part number.
All bushings are sold individually, Two (2) required per bar.
54100 - 1990-93 Miata Sway Bar (Solid) - Front
54102 - 1994-97 Miata Sway Bar (Solid) - Front
|,|||-||RACBEATTYPIN|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Racing Beat Type I Mazda Miata Nose Kit - 1990-1997|,|57100|,|559.99|,|443.00|,||,||,|0.000 |,||,|asdgfads|,||,|Racing Beat Type I Mazda Miata Nose Kit - 1990-1997
In addressing the need to beef-up the factory’s rather subdued styling lines of the Miata, reshaping of the front end easily offers the greatest impact. To this end, our TYPE I Nose Kit presents a stronger jaw line, a better-defined mouth, and functional brake scoops. All this is accomplished while maintaining the necessary appearance balance front-to-rear.
The TYPE I Kit is designed as a half-shell that fits over the existing nose to allow for easy installation. (This nose does not relace the existing nose.) The upper edge of this nose fits into the groove below the parking lights. Manufactured from hand-laid fiberglass and easily prepped for final painting, the nose will need to be fitted to your particular chassis.
|,|"Freight Cost" "add(+$275)"|-||-|||-||RACBEATREARW|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Racing Beat Type I Mazda Miata Rear Wing - 1990-1997|,|57101|,|529.99|,|462.00|,||,||,|5.000 |,||,|sdfgsdfg|,||,|Racing Beat Type I Mazda Miata Rear Wing - 1990-1997
The TYPE I Rear Wing provides a beautiful and functional touch to your Miata.
Racing Beat's Type I Rear Wing for the 1990-1997 Miata. Extremely popular over the years, the Type I Rear Wing provides the finishing touch to the bold theme we have created with our body pieces. Maintaining a low profile and sleek design, this modest wing provides a perfect balance of function and design. Manufactured from hand-laid fiberglass mat and easily prepped for final painting, the Type I Rear Wing is easily attached to the trunk lid with a simplified hardware kit.
|,|"Shipping Cost" "add(+$119)"|-||-|||-||RACBEATTYPII1|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Racing Beat Type II Mazda Miata Nose Kit - 1990-1997|,|57104|,|889.99|,|749.00|,||,||,|0.000 |,||,||,||,|Racing Beat Type II Mazda Miata Nose Kit - 1990-1997
Racing Beat's Type II Nose Kit for the 1990-97 Miata has proven to be one of the most popular replacement nose kits on the market. As stated by Sport Compact Car Magazine back in the April, 2000 issue, "Racing Beat's Miatas have set the standard in Miata aesthetics for the last ten years. Clean, uncluttered and purposeful, the cars retain Miata character, yet add some necessary attitude."
The Type II Miata Nose Kit presents an even stronger, more aggressive, statement in improving the factory lines of your Miata. The Type II Nose Kit replaces the stock nosepiece, and while it requires additional installation effort, as compared to the Type I Nose Kit, the results are well worth it! Utilizing the stock mounting points and hardware, this nose kit easily replaces the stock nose and incorporates functional openings for improved airflow. Manufactured from hand-laid fiberglass and easily prepped for final painting, the nose will need to be fitted to your particular chassis.
This has proven to be an extremely popular item over the years and offers a perfect replacement for a damaged factory nose.
Made in the USA
|,|"Freight and Handing Cost" "add(+$325)"|-||-|||-||RABETYIIMIRE|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Racing Beat Type II Mazda Miata Rear Wing - 1990-1997|,|57102|,|629.99|,|483.00|,||,||,|5.000 |,||,||,||,|Racing Beat Type II Mazda Miata Rear Wing - 1990-1997
The Type II Rear Wing adds an aggressive edge to the 1990-97 Miata. Originally designed for the second generation Miata, we have adapted this wing to fit on the earlier 1990-97 cars. Manufactured from hand-laid fiberglass mat and easily prepped for final painting, the Type II Rear Wing readily attaches to the trunk lid with a simplified hardware kit. Installs in minutes using the supplied drilling guides and mounting hardware. If you can work a drill, you can install this wing!!!
Styled to add a bit of "attitude" to the rear of the Miata, this great looking wing adds some "beef" to the rear of the car. Purposely proportioned to add some height and length to the rear deck, this wing adds a look that can't be matched by the simple design of the factory spoiler.
Made in the USA
|,|"Shipping Cost" "add(+$135)"|-||-|||-||RACBEATREARW1|,|NBACCESSORIES|,|Racing Beat Type II Mazda Miata Rear Wing - 1999-2005|,|57130|,|629.99|,|522.00|,||,||,|5.000 |,||,|sdfgsdfg|,||,|Racing Beat Type II Mazda Miata Rear Wing - 1999-2005
The TYPE II Rear Wing adds an aggressive edge to the Mazda’s latest Miata. Manufactured from hand-laid fiberglass mat and easily prepped for final painting, the TYPE II Rear Wing for the 1990-2005 Miata readily attaches to the trunk lid with a simplified hardware kit. Installs in minutes using the supplied drilling guides and mounting hardware. If you can work a drill, you can install this wing!!!
Styled to add a bit of "attitude" to the rear of the Miata, this great looking wing adds some "beef" to the rear of the car. Purposely proportioned to add some height and length to the rear deck, this wing adds a look that can't be matched by the simple design of the factory spoiler.
|,|"Shipping Cost" "add(+$129)"|-||-|||-||MIBUFA19|,|NBACCESSORIES|,|Racing Beat Type III Mazda Miata Bumper Rear Fairing Kit 1999-2005|,|57135|,|469.99|,|389.00|,||,||,|10.000 |,||,||,||,|Racing Beat Type III Mazda Miata Bumper Rear Fairing Kit 1999-2005
Instead of designing an entire bumper replacement, we opted to design a set of Bumper Fairings to "finish" the look of the Lower Side Skirt kit. A well-designed set of side skirts should integrate into the car to provide a sexy, "waist" or narrowing effect, without seeming intrusive or overly obvious. The Bumper Fairing Kit completes this effect by wrapping around the rear wheel to tailor the appearance back into the rear bumper.
Hand-crafted in the USA using hand-laid fiberglass, these Bumper Fairings are ready for final fitment and painting. Simple to install using only double-sided automotive tape, these fairings offer a subtle, but aggressive finish to your Miata.
Please call Go Miata Customer Service with questions regarding installation, painting, and shipping of our body components.
|,|||-||RABEMILOSISK|,|NBACCESSORIES|,|Racing Beat Type III Mazda Miata Lower Side Skirts (Pair) 1999-2005|,|57134|,|759.99|,|650.00|,||,||,|15.000 |,||,||,||,|Racing Beat Type III Mazda Miata Lower Side Skirts (Pair) 1999-2005
Our Lower Side Skirts carry the Racing Beat inspired styling theme from front to rear, integrating our nose and bumper components to provide a transition from the mild factory styling to a more aggressive look. These skirts incorporate styling cues from our front and rear bumpers to give the Miata a wider and more aggressive stance.
Review a list of Frequently Asked Questions regarding installation, painting, and shipping of our body components.
These skirts are hand-crafted in the USA using hand-laid fiberglass mat and prepped for final fit and finishing, and are designed for ease-of-installation with stainless steel screws and high bond-strength automotive tape.
|,|"Shipping Cost" "add(+$149)"|-||-|||-||RABETYIIIMIN|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Type III Mazda Miata Nose Kit 1999-2000|,|57132|,|858.99|,|738.00|,||,||,|150.000 |,||,||,||,|Racing Beat Type III Mazda Miata Nose Kit 1999-2000
The Type III Nose Kit for the 1999-00 Miata presents a stronger and more aggressive statement in upgrading the appearance of your Miata. The Type III Nose replaces the stock nosepiece while utilizing all of the OEM mounting positions and brackets. Handcrafted in the USA from hand-laid fiberglass and easily prepped for final painting, the nose only requires minor sanding and fitting to your particular chassis.
The Racing Beat Nose Kits for the Miata have proven to be an extremely popular item over the years and offers a perfect appearance upgrade, or as a replacement for a damaged factory nose. As stated by Sport Compact Car Magazine back in the April, 2000 issue, "Racing Beat's Miatas have set the standard in Miata aesthetics for the last ten years. Clean, uncluttered and purposeful, the cars retain Miata character, yet add some necessary attitude."
Note: This nose kit does not currently make provisions for mounting of any Mazda factory (or Mazda accessory kit) driving lights. We are currently developing a mounting kit that will allow the placement of these lights into the Racing Beat nose. Since Mazda offered at least two or three different light kits for this application, we will attempt to design a mounting kit that can be used to mount each of these different units. If you require a mounting kit for your nose kit, please contact us for more information and availability.
Shipping Note: Due to the size of this nose kit, this part cannot be shipped by UPS and must be sent via truck freight. Even though this part is relatively lightweight, this box is considered oversized. If you are considering purchasing any other large fiberglass components, i.e. side skirts, rear wing, deck cover, we can add these parts to the box and add no additional shipping expense. Contact Racing Beat for a shipping quote.
|,|"Freight Cost" "add(+$305)"|-||-|||-||RABETYIIIMIN1|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-1999-2005|,|Racing Beat Type III Miata Nose Kit 2001-2005|,|57133|,|949.99|,|807.00|,||,||,|110.000 |,||,||,||,|Racing Beat Type III Miata Nose Kit 2001-2005
The Racing Beat Nose Kits for the Miata have proven to be an extremely popular item over the years and offers a perfect replacement for a damaged factory nose. As stated by Sport Compact Car Magazine in the April, 2000 issue, "Racing Beat’s Miatas have set the standard in Miata aesthetics for the last ten years. Clean, uncluttered and purposeful, the cars retain Miata character, yet add some necessary attitude."
The Type III Miata Nose Kit presents a stronger and more aggressive statement in upgrading the appearance of your Miata. Designed for the 2001-05 Miata, this nose replaces the stock nosepiece while utilizing all of the OEM mounting positions and brackets. (The only differences between the 1999-2000 nose and the 2001-05 nose is the size and shape of the opening around the lower edge of the headlight.) Handcrafted in the USA from hand-laid fiberglass and easily prepped for final painting, the Type III nose only requires minor sanding and fitting to your particular chassis. Select this link for a larger photo of the Type III Nose.
Note: This nose kit does not currently make provisions for mounting of any Mazda factory (or Mazda accessory kit) driving lights. We are currently developing a mounting kit that will allow the placement of these lights into the Racing Beat nose. Since Mazda offered at least two or three different light kits for this application, we will attempt to design a mounting kit that can be used to mount each of these different units. More will be posted as development nears completion.
Please call Go Miata Customer Service for questions regarding installation, painting, and shipping of our body components.
Shipping Note: Due to the size of this nose kit, this part cannot be shipped by UPS and must be sent via truck freight. Even though this part is relatively lightweight, this box is considered oversized. If you are considering purchasing any other large fiberglass components, i.e. side skirts, rear wing, deck cover, we can add these parts to the box and add no additional shipping expense. Contact Go Miata Customer Service for a shipping quote.
|,|"Freight Cost" "add(+$315)"|-||-|||-||RACOTOPPLWIC|,|SOFTTOPNC|,|Raggtopp Convertible Top Plastic Window Cleaner and Protectant Kit|,|RGT-01162|,|39.99|,|31.90|,||,||,|0.000 |,||,||,||,|
Raggtopp Convertible Top Plastic Window Cleaner and Protectant Kit
Keep your Mazda MX-5 Miata convertible top window clean and clear with RaggTopp!
The RaggTopp Convertible Top Plastic Window Cleaner & Protectant Kit is your best defense against yellowing plastic windows. These two products maintain the clarity and like-new appearance of convertible top windows. And they’re easy to use! Boosted with Polycharger, RaggTopp Plastic Window Cleaner and Plastic Window Protectant are made to work hand in hand to keep your convertible top in pristine condition.
You’ve seen what a neglected convertible top window looks like – yellow, cracked, and cloudy. It’s not attractive or functional! The RaggTopp Convertible Top Plastic Window Cleaner & Protectant Kit was created to prevent the UV degradation that naturally occurs on convertible top windows.
This convertible top care kit includes:
4 oz. RaggTopp Convertible Top Plastic Window Cleaner
Step one is RaggTopp Convertible Top Plastic Window Cleaner. This environmentally friendly, non-toxic cleaner safely removes grime, water spots, and contamination from the soft plastic. The formula is biodegradable and safe on a variety of plastics. Use it on clear plastics, plastic windows, helmet visors, motorcycle windscreens, headlights, vinyl windows, Lexan and Lucite, and other plastic and vinyl window enclosures.
4 oz. RaggTopp Convertible Top Plastic Window Protectant
Step two is RaggTopp Convertible Top Plastic Window Protectant. This silicone-free sunscreen also blocks out moisture and dirt. The sophisticated formula contains Ciba Tinuvin UV blockers and it is boosted with Polycharger to provide a longer lasting protective barrier. Just like the cleaner, you can use RaggTopp Convertible Top Plastic Window Protectant on all automotive, marine, and commercial clear plastics.
Foam Applicator Pad, 4.25 in. x 3.5 in. x 1 in.
Use this pad to apply RaggTopp Convertible Top Plastic Window Cleaner. The texture of the foam will aid in cleaning the plastic surfaces.
Microfiber Applicator Pad, 5 in. x 3.5 in. x 1 in.
Use the microfiber pad to apply RaggTopp Convertible Top Plastic Window Protectant. The microfiber will ensure an even coat of protectant and the soft fabric will not scratch any surface.
Microfiber Towel, 15 in. x 15 in.
Buff away RaggTopp Convertible Top Plastic Window Protectant with this soft microfiber towel. The nonabrasive towel has looped fibers that will grab the protectant residue as it gently polishes the plastic to a shine.
Maintain your convertible top window with the RaggTopp Convertible Top Plastic Window Cleaner & Protectant Kit from the convertible top care experts!
|,|||-||RALCORZ|,|SHOP-BY-TOP-MIATA-BRANDS|,|Ralco RZ|,||,||,||,||,||,||,||,||,||,||,|||-||REMIEXMO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Rearview Mirror Extension Mounts|,|MC-RMEM|,|49.99|,|39.95|,||,||,|0.000 |,||,||,||,|Miata Rearview Mirror Extension Mounts
These mounts were designed to work in conjunction with the stock mount that comes with most all of the aftermarket convex mirrors. The stock mount when attached to the roll cage is closer to the driver than where the stock mirror mounted which is closer to the glass. These mounts bolt in between the stock mount and the mirror extending the mirror away from the driver closer to the front windshield, expanding the drivers field of vision.
|,|||-||RED1|,||,|Red|,|red1|,||,||,||,||,||,||,||,||,||,|||-||REDBLACCARFI|,||,|Red & Carbon Fiber|,|redblaccarfi|,||,||,||,||,||,||,||,||,||,|||-||REDLINEGOODS|,|SHOP-BY-TOP-MIATA-BRANDS|,|Red Line Goods|,||,||,||,||,||,||,||,||,||,||,|||-||REHESHTA|,|ENPE19|,|Reflective Heat Shield Tape|,|MC-RHS|,|29.99|,|19.95|,||,||,|0.000 |,||,||,||,|Miata Reflective Heat Shield Tape
Qty = One 2" x 10' roll.
This light weight thermal insulating tape reflects radiant heat away from wires, lines, cables, and more. This tape is an excellent way to insulate components without disassembly, or use it as a means to finish off other forms of thermal insulation to prevent fraying. This foil tape is very economical to other forms of heat protective tape cuts easily and has a self-adhesive backing. This reflective heat shield tape withstands 1000°F continuous of radiant heat and up to 400°F direct contact.
Great for the following areas:
- Transmission tunnel to keep heat out of the drivers compartment.
- Radiator, sides and top.
- Intake - Keep the intake from heating up by reflecting the heat that comes off the headers.
|,|||-||901-600|,|19MAMIEXLURA|,|Removable Luggage Rack - Modern Style 1990-2015|,|MS-901-600|,|309.95|,|244.95|,||,||,||,||,||,||,|Removable Luggage Rack - Modern Style 1990-2015
Contemporary looks in a non-permanent package. The style of the modern look rack is what will grab your eye. Fully functional and made from high quality stainless steel that will never rust. No permanent modification required (50 lbs. max. weight). Not suggested for use on PRHT
|,|"Oversize Fee" "add(+$15.00)"|-||-|||-||61-1812|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Replacement 11" RACE Front Rotor Ring - Slotted 2016-2019|,|61-1812|,|132.05|,|118.95|,||,||,||,||,||,||,|Replacement 11" RACE Front Rotor Ring - Slotted 2016-2019
Replacement rotor ring for our RACE 2-piece front brake rotors.
Rotor type: Slotted face
These race rotors use a premium grade iron with high 72-vane count for the greatest cooling and longest life under severe track use.
*** Product images may differ from actual product appearance ***
|,|||-||61-1809|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Replacement 11" REAR Rotor Ring - Plain Face 2016-2019|,|61-1809|,|135.05|,|119.95|,||,||,||,||,||,||,|Replacement 11" REAR Rotor Ring - Plain Face 2016-2019
Replacement rotor ring for our REAR 2-piece superlight brake rotors.
Rotor Type: Plain Face
(photo shows slotted rotor but this page is for a plain face rotor.
Price is for one rotor/hat. These friction rings are MADE TO ORDER - allow 2-3 weeks from time of order.
*** Product images may differ from actual product appearance ***
|,|||-||61-1810|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Replacement 11" REAR Rotor Ring - Slotted 2016-2019|,|61-1810|,|155.95|,|139.95|,||,||,||,||,||,||,|Replacement 11" REAR Rotor Ring - Slotted 2016-2019
Replacement rotor ring for our REAR 2-piece superlight brake rotors.
Rotor Type: Slotted
Price is for one rotor/hat. These friction rings are MADE TO ORDER - allow 2-3 weeks from time of order.
*** Product images may differ from actual product appearance ***
|,|||-||61-1806|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Replacement 11" Superlight FRONT Rotor Ring - Plain 2016-2019|,|61-1806|,|105.05|,|96.95|,||,||,||,||,||,||,|Replacement 11" Superlight FRONT Rotor Ring - Plain 2016-2019
Replacement rotor ring for our Ultralight 2-piece front brake rotors.
Rotor type: Plain face
*** Product images may differ from actual product appearance ***
|,|||-||61-1828WILF|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Replacement Brake Lines for FRONT ONLY Big Brake Kit 2016-2019|,|61-1828WILF|,|82.05|,|73.99|,||,||,||,||,||,||,|Replacement Brake Lines for FRONT ONLY Big Brake Kit 2016-2019
These are replacement brake lines for those who ALREADY have one of the ND front brake kits with Wilwood calipers. If you do not have Wilwood calipers, these will NOT fit your car. These are the lines we include in our front Big Brake kits.
Techna-Fit MX5 brake lines are made using teflon hose. The teflon hose has an extruded teflon core, with an outer stainless steel braided wire covering. The chrome or zinc plated steel fittings are then permanently crimped on each end.
All Techna-Fit hoses have a PVC cover, which gives added protection from flying debris; it also gives some abrasion protection from the line rubbing on suspension parts, in extreme braking conditions, with full compression (most movement of line). One advantage is that Techna-Fit MX5 brake lines reduce volumetric expansion. Over time and under continuous use, OEM MX5 rubber lines can swell and expand, exposing the driver to brake fade. The rubber cover is also vulnerable to attacks from the ozone layer (rubber deteriorates and causes failure).
In extreme applications (autocross, racing, hard driving) rubber Miata Brake line hoses might be susceptible to debris, thus causing failure. Stainless steel hoses provide some added protection from these issues. All Techna-Fit's factory assembled MX5 brake line kits are backed by their lifetime warranty. Sorry, don't yet know if these work with the Brembo calipers.
*** Product images may differ from actual product appearance ***
|,|||-||REPLACEMENT-BULB-FOR-COBALT-LOW-PROFILE-HEADLIGHT-KIT|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Replacement Bulb for Cobalt Low-Profile Headlight Kit|,|906-054|,|19.99|,|8.98|,||,||,||,||,||,||,|Replacement bulb for Low-Profile Headlamp System by Cobalt
|,|||-||11-10334|,|19MAMIEXCACO|,|Replacement Catalytic Converter, NON-CARB 1994-1997|,|11-10334|,|356.00|,|299.00|,||,||,||,||,||,||,|Replacement Catalytic Converter, NON-CARB 1994-1997
A quality replacement catalyst for your Miata at one third of the cost of the dealer. Not CARB Exempt for OBDII. NOTE this discount unit does NOT include mounting hardware and gaskets. This is the older 49 state unit...NOT for sale to residents of California. Note that 17 states are now "CARB" standard states, including New Jersey Connecticut Oregon Washington Rhode Island New York Maine Massachusetts Pennsylvania New Mexico Florida Colorado
|,|||-||50-66-7125|,|SHOP-BY-SALE|,|Replacement Rear Window for NC Hardtops (Molded) 2006-2014|,|50-66-7130|,|689.45|,|495.00|,||,||,||,||,||,||,|Replacement Rear Window for NC Hardtops (Molded) 2006-2014
This is a replacement molded window for 2006-2014 hardtops purchased beginning in May 2017. You can purchase this window to replace the flat one if you want a totally sealed rear window.
|,|"Shipping & Handling" "add(+$195)"|-||-|||-||50-65-7130|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-HARDTOP-2016|,|Replacement Rear Window for ND Hardtops (Molded) 2016+|,|50-65-7130|,|699.95|,|509.00|,||,||,||,||,||,||,|Replacement Rear Window for ND Hardtops (Molded) 2016+
*Special Order, Please allow 1-2 weeks for production of these Custom made Miata Hardtop
This is a replacement molded window for the ND (2016-17) MX-5 hardtop. You can replace any window that came with your ND hardtop, including the flat windows if you want a fully sealed rear window.
DG Motorsports Hardtop only
|,|"Shipping & Special Handling fee" "add(+$195)"|-||-|||-||RIVEOH|,|OWNERS-SHOWCASE|,|Richard Velardo
Medina, OH|,|riveoh|,||,||,||,||,||,||,|asdfad|,||,|Meet Baby, our '99 much modified Miata. Purchased new in February
of '99 it immediately became the subject of over 40 mods to date. One
of the latest mods was the addition of '90 seats that soon were covered
in Katzkins seat covers from GoMiata. Matching faux suede material was
used to cover the console lid (padded) and the door panels. Also in the
interior is a UK issue clock/bin, Japanese market bin, after market
radio, electroluminescent gauge faces, chrome trim rings and wood dash
kit. I made the matching wood shift and e-brake handles from a chunk of
Rock Maple. Aluminum pedals are in transit form GoMiata and will be
installed as soon as they arrive.
But the heart of this beast is a supercharged & inter-cooled
engine putting 187 hp to the rear wheels. This engine mod puts me into
the Street Modified / 2 seat class for autocross, where I've luckily
finished in third place for the NEOHIO region of the SCCA. Baby is much
faster than I am, but I'm having fun attempting to autocross. Other
engine mods include remote oil cooler of my design, painted pieces
parts and a custom air filter.
A veteran of two trips to the Gap, Baby and I will be back again
this year, part of the group representing The Northcoast Miata Club.
We've had a lot of fun together for the last five years, have managed
to stay out of trouble and have met hundreds of fantastic Miataphiles
in our travels. You can find me on Miata.net, in the NB forum or at
gomiata@zoominternet.net. The license plates? Oh, those are
coincidental, but cool.
Rich Velardo,
Medina, Ohio
|,|||-||RIGRFAMT|,|OWNERS-SHOWCASE|,|Rick Gregory
Great Falls, MT|,|rigrfamt|,||,||,||,||,||,||,|dsfdf|,||,|Here are some of the things I have done to my 1990 Mariner Blue Miata. I actually purchased this for a steal of a price last year on eBay - my first such purchase and I am happier than, well, just say very happy. The previous owner was in San Diego and I had relatives there that kept it for me and then met me in Nevada where we transferred it from one trailer to another so I could bring it home to Montana. It had very few problems short of needing an alignment, springs & shocks, tires, seats, and a lot of TLC. It still amazes me how badly some people can take care of what would otherwise be a very nice and highly coveted car. I sold my other roadster, a 1974 Triumph Spitfire just a few months after getting the Miata home. I never met a roadster I didn't like, but the Miata has to be one of my favorites of all time. Thanks much to you and Go Miata for helping me bring it back up to the standard where it belongs!
Things I've done or added since last year:
Trunk lift kit from Go Miata
Headlight Modification from Mid Tenn Miata
Carbon Alteeza tail lights
Black cloth seats from a 1997 Miata
After-market Spoiler
Late model wheels from a 1999 Miata
New set of Goodyear paw pads
Racing Beat Type II style bar from Go Miata
Trunk Lid Saddlebag from Go Miata
Miata floor mats with White lettering from Go Miata (white dyed blue to match the exterior)
Aluminum Scuff plates w/blue Miata lettering
Blue shifter boot
Front "twilights" & fog lamps
Tan replacement Top and boot
Mazda mudflaps
Blue LED lighted exhaust tip
Eibach Springs and KYB AGX Adjustable shocks from Go Miata
Electric door locks, alarm system, & trunk release (ready to be installed)
Rick Gregory
Great Falls, MT
|,|||-||RIMPRO-TEC-WHEEL-BANDS|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|RimPro-Tec Wheel Bands |,|rimpro-tec-wheel-bands|,|139.00|,|119.00|,||,||,||,||,||,||,|RimPro-Tec Wheel Bands
Nothing sends shivers up a driver's spine like the sound of an expensive aluminum wheel grinding against unforgiving concrete. So, kick those scraped rims to the curb with a set of RimPro-Tec Wheel Bands. Protecting your rims from the perils of parking, Rim Protect wheel bands deliver a double-dose of style and protection.
Crafted from a two-piece hard plastic and shock-absorbing acrylic foam backing, RimPro-Tec wheel bands take the abuse that the curb dishes out—not your wheels. And to go beyond simple protection, you can add custom style with your choice of colors that match, highlight or offset the look of your wheels.
Boasting an easy clean, peel and stick installation, your complete set of wheel bands goes on in around 30 minutes. The kit includes four Wheel Bands, four cleaning wipes and one application tool—everything you need. And, they fit almost any rim ranging from 10" to 22" in diameter.
Prevent curb rash with RimPro-Tec Wheel Bands
Protects expensive rims from curb dings, scratches and scrapes
Adds a custom flare to your custom or factory wheels
Features a two-piece, hard plastic design with shock-absorbing acrylic foam backing
Easily installs in around 30 minutes—just clean, peel and stick
Less cost and hassle than wheel refurbishing
Choose from a range of colors to match, highlight or offset your wheels
Fits wheel sizes ranging from 10" to 22"
Kit includes four Wheel Bands, four cleaning wipes and one application tool
Installation Video Link:
https://www.youtube.com/watch?v=NRc-iCWWMyE&feature=youtu.be
|,|"Insert Color" "Select Here" "Black" "Blue" "Orange" "Red" "Gray" "Sky Blue" "White" "Yellow"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-ROADSTER|,|SHOP-BY-TOP-MIATA-BRANDS|,|ROADSTERSPORT|,||,||,||,||,||,||,||,||,||,||,|||-||61-1933|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport "SUPER-Q" Header Version Stainless Steel PREMIUM ADJUSTABLE Sound MX5 Miata Exhaust 2016-2020|,|61-1933|,|1,155.99|,|923.00|,||,||,||,||,||,||,|RoadsterSport "SUPER-Q" Header Version Stainless Steel PREMIUM ADJUSTABLE Sound MX5 Miata Exhaust 2016-2020
Special version of SuperQ with added 3.5 inch diameter resonator on the inlet to kill the RASP that is added with adding a standard length highflow header to the ND. Otherwise similar to normal SuperQ, see our standard SuperQ product description for more. STRONGLY recommended for those getting a header!!
Brian's Application Notes: Not needed for those getting our Longtube header that has a massive resonator in the midpipe. That midpipe large resonator hangs down a bit under the car, will not be everyone's cup of tea. Thus, for those getting our standard length header, or already using standard length header from another company with our standard length midpipe, this is the cure for raspy sounds unleashed by that standard length performance header.
|,|"Shipping cost" "add(+$89)"|-||-|||-||NEWROQSTSTMX|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport "SUPER-Q" Stainless Steel PREMIUM ADJUSTABLE Sound MX5 Miata Exhaust - Appearance Package 2006-2015|,|GWR-61-1588|,|959.99|,|798.00|,||,||,|10.000 |,||,||,||,|RoadsterSport "Q" Stainless Steel MX-55 Miata Exhaust - APPEARANCE PACKAGE VERSION 2006-2015
This SPECIAL ORDER version is only for the cars with Appearance package...tips are extended 2.5 inches.
We make THREE exhaust choices for the 2006 and newer Mazda MX-5 Miata, including the RoadsterSport RACE, our best selling RoadsterSport II Duals, and now this duals unit we affectionately call the RoadsterSport Q.
This unit is the most mild...about 10 to 15% louder than stock on an otherwise stock NC...with a deep burble. This unit was designed with the sound absorbing ability to handle future mods including the massive sound gain caused by a header change (either our RoadsterSport header or our Racing Beat header).
Removing the factory header means removing the first catalytic converter which is also a very large resonator. The result of the header change is a massive amount of additional sound down the exhaust tubes. Developing a muffler that could both deliver all the flow of our other RoadsterSport designs yet swallow the sound unleashed by the header was a challenge. The factory muffler does an okay job with the sound from a header change but at the cost of flow and a giving back of much of the hard fought horsepower gains of the header change.
By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design.
Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....all the flow, without all the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||ROQSTSTMX5MI|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport "SUPER-Q" Stainless Steel PREMIUM ADJUSTABLE Sound MX5 Miata Exhaust 2006-2015 |,|GWR-60-13372|,|918.00|,|798.00|,||,||,|10.000 |,||,||,||,|RoadsterSport "Q" Stainless Steel MX-5 Miata Exhaust 2006-2015 NEW!
We now have THREE exhaust choices for the 2006 and newer MX-5 Miata, including the RoadsterSport RACE, our best selling RoadsterSport II Duals, and now this duals unit we affectionately call the RoadsterSport Q.
This unit is the most mild...about 10% louder than stock on otherwise stock NC...with a deep burble. This unit was designed to handle future mods including the massive sound gain caused by a header change (either our RoadsterSport header or our Racing Beat header). Removing the factory header means removing the first catalytic converter which is also a very large resonator. The result of the header change is a massive amount of additional sound down the exhaust tubes. Developing a muffler that could both deliver all the flow of our other RoadsterSport designs yet swallow the sound unleashed by the header was a challenge. The factory muffler does an okay job with the sound from a header change but at the cost of flow and a giving back of much of the hard fought horsepower gains of the header change. By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design.
Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....all the flow, without all the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||61-1732|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport "SUPER-Q" Stainless Steel PREMIUM ADJUSTABLE Sound MX5 Miata Exhaust 2016-2020|,|61-1732|,|985.15|,|792.00|,||,||,||,||,||,||,|RoadsterSport "SUPER-Q" Stainless Steel PREMIUM ADJUSTABLE Sound MX5 Miata Exhaust 2016-2020
Following the huge popularity of our NC application "Q" Muffler this Q for ND is once again "Q" for Quiet version. This attenuation design is a premium "NO-DRONE" choice, great for those who want a more throaty sound than stock but still mild. Smooth mandrel bent tubing redirects the flow for a side entrance to the muffler where we engineered a three chamber design. It would be much cheaper to just use a single big muffler with nothing but perforated pipe through the center surrounded by sound absorbing materials, but doing it right with the three chamber design allows us to tailor precisely the FUN sound you want when you push it toward redline, without the harsh drone on decel that the more simple designs make you suffer.
This triple attenuation chamber design muffler is the most mild of our choices and mellow on an otherwise stock MX5 Miata...about 15% louder than stock...with a deep sporty burble anytime you hit the go pedal but quiet when you are just cruising.
This triple chamber design features an exclusive 'Helmholtz Resonator' first chamber that massively reduces the standing wave inside the exhaust system, reducing the 'booming' tendency by over 50db inside a top up Miata cabin that is common on many aftermarket Miata exhausts. To create this Helmholtz chamber we outfitted our 2016 ND Gen Miata with a computer and sound analyzer and microphones and drove it under varying conditions and loads and without the stock muffler for the computer to carefully measure the sound spectrum coming out the stock midpipe. We then use that data and some special software to calculate the particulars of the Helmholtz chamber size and valve specs to precisely knock down the frequencies we do not want to hear in the new Miata while allowing the good throaty burble fun sounds to pass through. The result is deep throaty fun, without the drone!
The Helmholtz chamber gives this muffler a dual personality, under decel it is super mild and quiet, yet when you push hard toward redline it gets more fun and racy! With the top down lots of fun throaty burble, but dramatically more tame when the top is up. 22 pounds. In brief, FUN when you want it, and yet totally mild when just cruising top up.
Yes, simple BOLT ON install, just two bolts!
Includes our famous RoadsterSport Super Light 3.5 rolled tip originally developed for NC application. It took a big investment in new equipment to come up with a rolled tip that didn't add weight to our high flow performance designs...but it was worth it. This 3.5" OD outlet tip completes the look of the exhaust and provide a more aggressive and sporting appearance than the very tiny pair of of polished pipe outlets used on the factory muffler.
INCLUDES our exclusive baffle cone insert in the Tip which is REMOVEABLE and allows you to set the sound to sporty...or quiet. Also available is our optional packed baffle with which you can quiet it down even more. This system is 10% to 15% louder than the stock Miata muffler on an otherwise stock MX5 Miata exhaust system....and only 20% over stock sound level when used with our RoadsterSport midpipe. Works great with stock midpipe or RoadsterSport Midpipe. Customers planning a header are encouraged to wait for special Header version of this SuperQ that adds additional resonator on inlet side to better handle the raspy sounds unleashed by a header swap which will be released about the same time as our header. Baffle retained by small hex bolt inserted from well under each tip.
Proudly made in the USA with a LIFETIME WARRANTY. Fits all 2016 and newer Miatas with manual or automatic transmission, soft top or retractable hardtop.
This Miata exhaust is guaranteed for as long as you own your Miata.
|,|"Shipping cost" "add(+$89)"|-||-|||-||61-1958|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport "SUPER-Q" TWIN TIP Stainless Steel PREMIUM ADJUSTABLE Sound MX5 Miata Exhaust 2016-2020|,|61-1958|,|1,199.00|,|848.00|,||,||,||,||,||,||,|RoadsterSport "SUPER-Q" TWIN TIP Stainless Steel PREMIUM ADJUSTABLE Sound MX5 Miata Exhaust 2016-2020
Twin Tip version of our famous SuperQ.
Following the huge popularity of our NC application "Q" Muffler this Q for ND is once again "Q" for Quiet version. This attenuation design is a premium "NO-DRONE" choice, great for those who want a more throaty sound than stock but still mild. Smooth mandrel bent tubing redirects the flow for a side entrance to the muffler where we engineered a three chamber design. It would be much cheaper to just use a single big muffler with nothing but perforated pipe through the center surrounded by sound absorbing materials, but doing it right with the three chamber design allows us to tailor precisely the FUN sound you want when you push it toward redline, without the harsh drone on decel that the more simple designs make you suffer.
This triple attenuation chamber design muffler is the most mild twin tip of our choices and mellow on an otherwise stock MX5 Miata...about 20% louder than stock when on the gas...with a deep sporty burble anytime you hit the go pedal but nearly as quiet as stock when you just want to cruise.
This triple chamber design features an exclusive 'Helmholtz Resonator' first chamber that massively reduces the standing wave inside the exhaust system, reducing the 'booming' tendency by over 50db inside a top up Miata cabin that is common on many aftermarket Miata exhausts. To create this Helmholtz chamber we outfitted our 2016 ND Gen Miata with a computer and sound analyzer and microphones and drove it under varying conditions and loads and without the stock muffler for the computer to carefully measure the sound spectrum coming out the stock midpipe. We then use that data and some special software to calculate the particulars of the Helmholtz chamber size and valve specs to precisely knock down the frequencies we do not want to hear in the new Miata while allowing the good throaty burble fun sounds to pass through. The result is deep throaty fun, without the drone!
The Helmholtz chamber gives this muffler a dual personality, under decel it is super mild and quiet, yet when you push hard toward redline it gets more fun and racy! With the top down lots of fun throaty burble, but dramatically more tame when the top is up. 24 pounds. In brief, FUN when you want it, and yet totally mild when just cruising top up.
Yes, simple BOLT ON install, just two bolts!
INCLUDES our exclusive baffle cone insert in the Tips which is REMOVEABLE and allows you to set the sound to sporty...or quiet. Also available is our optional packed baffle with which you can quiet it down even more. This system is 10% to 15% louder than the stock Miata muffler on an otherwise stock MX5 Miata exhaust system....and only 20% over stock sound level when used with our RoadsterSport midpipe. Works great with stock midpipe or RoadsterSport Midpipe. Customers planning a header are encouraged to order special Header version of our SuperQ that adds additional resonator on inlet side to best cope with the raspy sounds unleashed by a header swap. Baffles retained by small hex bolt inserted from well under each tip.
Proudly made in the USA with a LIFETIME WARRANTY. Fits all 2016 and newer Miatas with manual or automatic transmission, soft top or retractable hardtop. This Miata exhaust is guaranteed for as long as you own your Miata.
BRIAN'S APPLICATION NOTES. Not just two tips on one pipe from the muffler, true twin exit from the muffler means a bit more sound than single tip version of SuperQ. And sound frequency balance is very different from each tip, the driver's side tip is essentially skipping final chamber in the muffler. That means you can have some fun mixing your own sound here using baffles in just one tip or the other. And, use of our exclusive baffles will have a big impact on sound reduction with this version, use of baffle in the driver's side tip will have the most reduction in sound level because that is the most direct route out. Result is many levels of sound, lots of control by the end user and ability to dial the result to your own preferences. My recommendation is remove the included baffles before install, my bet is that many never put them back because this muffler is quite mild on otherwise stock MX5.
BRIAN'S INSTALL NOTES:
Installation of this Miata exhaust is SUPER EASY...just two 14mm bolts to loosen! When you open the big box you will find separate foam wrap on the exhaust tip, leave that foam around the tip during your install to protect the polished tips and your car's soft plastic in the exhaust cutout. Use gloves. Note the 'bolts' from the factory are actually studs with springs and nuts and the factory usually jams the nuts on so hard that unbolting it will bring the stud out too. If that does not happen then use a 13mm long socket to pull the stud, or use jam nut technique where both nuts are put on one stud against each other and then wrench used on the inner of the two to back out the stud. Then lube up the stock exhaust hangers with dish soap and yank stock muffler back and forth to work the soap into the rubber hangers and then the muffler will slide off those rubber hangers easily. Then hang the new muffler on the wet and soapy rubber hangers and torque 'bolts' with the springs back in place to 30ft/lbs. Now you can remove foam tip wrap. Option to remove the baffle too, to do so loosen bolt that holds it from under the exhaust tip and use it as handle to shake the baffle loose and then unscrew bolt the rest of the way and pull the baffle (pulling baffle raises the sound slightly). Note the muffler to midpipe joint is a ball socket connection for the first time on a Miata, it is designed to move a lot, so please do not add sealants that will gum up that dry ball socket joint.
SUMMARY OF FEATURES
Lifetime Warranty.
All Stainless Steel
Dyno tested and proven to make power.
Performance gains in horsepower and torque.
Mild Deep Sound with NO Decel Drone.
Smooth Mandrel formed tube for max flow
User Adjustable sound level using included removeable baffle.
|,|"Shipping cost" "add(+$89)"|-||-|||-||RO3MU99|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|RoadsterSport 3 Miata Muffler 1999-2005|,|11-1004|,|799.00|,|498.00|,||,||,|5.000 |,||,||,||,|Our favorite exhaust choice for the Miata...and the ONLY one with an optional highflow midpipe with built in converter and resonator (sold separately).
Built in solid 304 stainless steel and completely polished to a mirror finish, this high quality muffler incorporates an insert for backpressure adjustibility which makes this exhaust a great addition to any future supercharger or turbo application. This new version has both baffle included and a double walled tip for years of lasting good looks while giving you control over the final sound level.
With an ear pleasing exhaust note, great price and easy installation this is a great beginning for performance modifications. Check out the optional midpipe here on the right.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||11-1004H|,|19MAMIEXSYMU1|,|RoadsterSport 4 Helmholtz Polished Stainless Steel Miata Exhaust Muffler 1999-2005|,|11-1004H|,|859.00|,|648.00|,||,||,||,||,||,||,|RoadsterSport 4 Helmholtz Polished Stainless Steel Miata Exhaust Muffler 1999-2005
FOURTH GENERATION UPDATE....The Helmholtz chamber revolution in exhaust technology finally available for all Miatas! Our new HELMHOLTZ exhaust system features an exclusive Helmholtz main chamber that massively reduces the standing wave 'boominess' or drone inside the exhaust system! Cuts the 'booming' frequencies of 120-130hz by over 35+db inside a top up Miata cabin which is a common source of complaints with aftermarket exhausts on the Miata. Result is all the FUN throaty sounds you want, without the drone other systems make that wears you out on long uphill and downhill sections of road.
Updated version of our favorite NB Muffler, now the ONLY choice on the market with Helmholtz chamber...AND adjustable sound level! YES, fits manual and automatic transmission. Built in solid 304 stainless steel and completely polished to a mirror finish, this high quality Miata exhaust is our only choice that incorporates a baffle insert that gives YOU some control over the final sound level (baffle in is only about 15% more sound than stock, baffle out is about 25% more sound than stock...so you always have a choice for those longer trips). Weight is lighter than factory.
For those that want even more sound add our highflow Miata midpipe for more flow and another 10% more sound.
This latest version of our best selling Miata exhaust has both baffle included and a double walled tip for years of lasting good looks while giving you control over the final sound level. And, you always have the option of our packed baffles which are sold here separately.
BRIAN'S APPLICATION NOTES: This is a LOUD exhaust. The helmholtz addition does not make it quiet, quite the opposite. The Helmholtz chamber knocks down what most of us perceive as drone by over 35 db but it lets all the fun other sounds right on through! That means by definition this muffler is aggressive, has a ton of attitude, and is NOT for everyone! Designed for the three pedal owners out there who love to zing these amazing sportscars to redline daily. Know who you are, if you are actually driving the car around at very low rpms our experience is that you will prefer the bigger mufflers such as our Racing Beat, in our experience this includes almost all owners of the optional automatic transmission.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||NEWROALLSTST|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport All Stainless Steel MX-5 Miata Header 2006-2015|,|GWR-610080|,|1,029.99|,|868.00|,||,||,|5.000 |,||,||,||,|RoadsterSport All Stainless Steel MX-5 Miata Header 2006-2015
Gorgeous all T304 polished stainless steel max flow MX-5 Miata header.
Lifetime warranty. We have included a number of features into our MX-5 Miata header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
We also put incredible effort into making the exit at the collector as smooth and perfect as we can get it... this has been the focus of the last few months... this has been the source of delay because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible.
Note we use the factory collector gasket.... so our fit is as factory-like as possible. Our collector outlet is 2.5 inches. Curiously, the factory outlet is ALSO 2.5 inches and then the factory exhaust chokes down after that point.
For best performance customers should match our header with our midpipe and exhaust so they are running 2.5 inches of flow all the way...but our header will bolt in place of the factory header and connect perfectly to the factory midpipe.
Note that we have no O2 sensor connection in our header....in part to keep flow as clean as we can get it but also because we could see no purpose in locating them in the header since doing so will throw a code because pulling the factory header includes removal of the first catalytic converter.
THREE choices on what to do with the O2 sensors with our header.
* Choice ONE is to simply open air mount them in the engine bay (or unplug and remove them) and they will throw the same codes in the same manner as if they were in the header.
* Second and better choice is buy our midpipe which is designed to take both O2 sensors...and includes two O2 sensor connections...one before the midpipe's converter and one after the midpipe's converter to help avoid a code by simulating the factory installation before.
* Third choice is to have an O2 bung welded by your local muffler shop before and after the factory second converter in the factory midpipe to replicate the setup we are doing with our midpipe.
Choices two and three require extension of the O2 wires and our friends at Racing beat are working on a "race kit" set of extension wires so customers with their header (or ours) can make choice two or three without splicing the wires.
CARB NOTICE: Installing a header in the new 2006 through 2012 Miata means removing the first catalytic converter which means there can NEVER be a street legal header for this vehicle. Thus, the header is legal for offroad race use only, and can NEVER be CARB approved.
SOUND NOTICE: The first converter is also a pretty good resonator so understand that installation of any header will raise the exhaust sound level about 15 to 20%.
|,|"Shipping Cost" "add(+$79)"|-||-|||-||61-1262|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport All Stainless Steel MX5 COMPLETE STREET EXHAUST COMBO. 2006-2015 |,|61-1262|,|2,817.00|,|2,298.00|,||,||,||,||,||,||,|RoadsterSport All Stainless Steel MX5 COMPLETE STREET EXHAUST COMBO. 2006-2015
The complete exhaust combo profiled on our own PRHT SS Forum Project MX5 Miata (just without the ceramic coating on the header)
Simple Bolt on for MANUAL TRANSMISSION ONLY, can be installed on Automatic but see our forum header install thread for details of what is required (cooling line re-route and modification of heat shield panel near midpipe install).
Includes our Made In America All Stainless Steel Lifetime Warranty
*Roadstersport STREET Header
*New RoadsterSport HELMHOLTZ Midpipe
*RoadsterSport-SuperQ exhaust
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links, just short summaries below.
RoadsterSport STREET Header! The most torque you can buy in a catted MX5 Miata header! See our forum MX5 PRHT Project and Dyno thread for many more details on development history, pictures of prototypes, and dyno work. A great choice for street customers looking for an MX5 Miata header with converter that is 49 state legal!
MX5 Miata Street Header features:
-Longer, equal length runners
-High-flow 5" round, 200cpi Ceramic Core Catalytic Converter
-49 state legal cat (EPA and OBD2 compliant, but NOT CARB APPROVED for California, the Carsound 99659HM core is an EPA certified converter covering up-to 6.2L/6375 lbs so it easily handles the flow of our performance header while still delivering clean tailpipe emissions)
-Bolt-in design for MANUAL TRANSMISSION
Also saves weight, factory header assembly is 15.2 pounds and this RoadsterSport MX5 Street Header with converter is just 11 pounds! Converter has two year warranty (normally aspirated cars only, not for a supercharged Miata!), the rest is all stainless steel and has a LIFETIME warranty, even the flanges!
Currently for Manual Transmission only (a professional can install on the automatic but it requires re-engineering the cooling line layout and modification to the bell housing). Also, sorry to our Australian customers but this fits Left Hand Drive only!
We have included a number of extra features into our MX5 Miata Street Header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc. INSTALL NOTE: We have not included the O2 extension cords because we find it pretty easy to release the O2 wires from the factory bracket to which they are attached (follow the O2 wires until you reach that bracket).
RoadsterSport Stainless Steel HELMHOLTZ Midpipe. Ultimate "BOOMINESS" prevention, the Helmholtz chamber is a revolution in Miata exhaust system design, computer designed to cut the 'boomy' drone frequencies we don't want reaching the muffler by 48 decibels. The result is the fun burble, not the decel drone of other brand systems! All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is slightly larger diameter than stock at 2.5 inches all the way through. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved). Stock midpipe is 20 pounds, our midpipe is 16.5 pounds for total savings of 3.5 pounds.
The header and midpipe are legal for offroad race use only in California, and not CARB approved at this time.
RoadsterSport "Super-Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust. Our Best! We make FIVE very different Miata exhaust choices for the 2006 and newer MX5 Miata, including the RoadsterSport RACE, RoadsterSport STREET Single, the RoadsterSport II Duals, the RoadsterSport Q, this super premium duals unit we affectionately call the RoadsterSport Super-Q. This attenuation chamber design unit is the most mild and mellow on an otherwise stock Miata...about 10 to 15% louder than stock...with a deep burble. This unit was designed for both improved flow performance AND the best sound absorbing ability possible. This premium MX5 muffler is the BEST choice for those who plan such additional mods as a supercharger or header change (which unleashes a massive amount of additional sound). By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....ALL THE FLOW, without the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.
INSTALL NOTES
Read full header and exhaust installation hints, and see PICTURES, and notes in our forum Installation Instruction Section! The first secret is LUBE your hangers well with dish soap so you can get flanges aligned properly, and torque the supplied hardware to NO MORE THAN 25-30 ft/lbs (using more torque will actually result in LESS seal because you will pucker the flange out at the middle).
A little on the science, we targeted 120-130 hertz range which is where most folks report uncomfortable 'drone' or 'boominess' and got a total of 48 decibel max drop right at the 125 hertz level...which is a MASSIVE reduction. Nonetheless, looking at broader range we get an average 20 decibel drop from 115 to 138 hertz with reasonable 8 decibel drop in the ranges of 95 to 115 and 138 to 180 hertz.
|,|"Shipping cost" "add(+$169)"|-||-|||-||61-1262C|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport All Stainless Steel MX5 COMPLETE STREET EXHAUST COMBO...with CERAMIC Upgrade and NEW HELMHOLTZ MIDPIPE 2006-2015 |,|61-1262C|,|2,917.00|,|2,418.00|,||,||,||,||,||,||,|RoadsterSport All Stainless Steel MX5 COMPLETE STREET EXHAUST COMBO...with CERAMIC Upgrade and NEW HELMHOLTZ MIDPIPE 2006-2015
The complete exhaust combo profiled on our own PRHT SS Forum Project MX5 Miata!
Simple Bolt on for MANUAL TRANSMISSION ONLY, can be installed on Automatic but see our forum header install thread for details of what is required (cooling line re-route and modification of heat shield panel near midpipe install).
Includes our Made In America All Stainless Steel Lifetime Warranty
*Roadstersport CERAMIC COATED STREET Header
*RoadsterSport Helmholtz Midpipe
*RoadsterSport-SuperQ exhaust
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links, just short summaries below.
RoadsterSport STREET Header! The most torque you can buy in a catted MX5 Miata header! See our forum MX5 PRHT Project and Dyno thread for many more details on development history, pictures of prototypes, and dyno work. A great choice for street customers looking for an MX5 Miata header with converter that is 49 state legal!
MX5 Miata Street Header features:
-Longer, equal length runners
-High-flow 5" round, 200cpi Ceramic Core Catalytic Converter
-49 state legal cat (EPA and OBD2 compliant, but NOT CARB APPROVED for California, the Carsound 99659HM core is an EPA certified converter covering up-to 6.2L/6375 lbs so it easily handles the flow of our performance header while still delivering clean tailpipe emissions)
-Bolt-in design for MANUAL TRANSMISSION
-Bolts to RoadsterSport MX5 Midpipe...or stock MX5 midpipe. Also saves weight, factory header assembly is 15.2 pounds and this RoadsterSport MX5 Street Header with converter is just 11 pounds! Converter has two year warranty (normally aspirated cars only, not for a supercharged Miata!), the rest is all stainless steel and has a LIFETIME warranty, even the flanges!
Currently for Manual Transmission only (a professional can install on the automatic but it requires re-engineering the cooling line layout and modification to the bell housing). Also, sorry to our Australian customers but this fits Left Hand Drive only!
We have included a number of extra features into our MX5 Miata Street Header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc. INSTALL NOTE: We have not included the O2 extension cords because we find it pretty easy to release the O2 wires from the factory bracket to which they are attached (follow the O2 wires until you reach that bracket).
RoadsterSport Stainless Steel HELMHOLTZ Midpipe. All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is slightly larger diameter than stock at 2.5 inches all the way through. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved). Uses new Helmholtz resonator midpipe which kills the 'boomy' drone other systems allow BEFORE it reaches your muffler.
The header and midpipe are legal for offroad race use only in California, and not CARB approved at this time.
RoadsterSport "Super-Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust. Our Best! We make FIVE very different Miata exhaust choices for the 2006 and newer MX5 Miata, including the RoadsterSport RACE, RoadsterSport STREET Single, the RoadsterSport II Duals, the RoadsterSport Q, this super premium duals unit we affectionately call the RoadsterSport Super-Q. This attenuation chamber design unit is the most mild and mellow on an otherwise stock Miata...about 10 to 15% louder than stock...with a deep burble. This unit was designed for both improved flow performance AND the best sound absorbing ability possible. This premium MX5 muffler is the BEST choice for those who plan such additional mods as a supercharger or header change (which unleashes a massive amount of additional sound). By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....ALL THE FLOW, without the noise! Weight is 24 pounds.
INSTALL NOTES
Read full header and exhaust installation hints, and see PICTURES, and notes in our forum Installation Instruction Section! The first secret is LUBE your hangers well with dish soap so you can get flanges aligned properly, and torque the supplied hardware to NO MORE THAN 25-30 ft/lbs (using more torque will actually result in LESS seal because you will pucker the flange out at the middle).
A little on the science, we targeted 120-130 hertz range which is where most folks report uncomfortable 'drone' or 'boominess' and got a total of 48 decibel max drop right at the 125 hertz level...which is a MASSIVE reduction. Nonetheless, looking at broader range we get an average 20 decibel drop from 115 to 138 hertz with reasonable 8 decibel drop in the ranges of 95 to 115 and 138 to 180 hertz.
|,|"Shipping cost" "add(+$169)"|-||-|||-||61-2084|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport Complete Street Exhaust Combo 2016-2020|,|61-2084|,|2,715.02|,|2,320.00|,||,||,||,||,||,||,|RoadsterSport Complete Street Exhaust Combo 2016-2020
The complete exhaust combo profiled on our own RF Project MX5 Miata!
Includes our Made In America All Stainless Steel Lifetime Warranty
*Roadstersport Max Torque Header
*RoadsterSport Midpipe
*RoadsterSport-SuperQ Header Version Exhaust
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links, just short summaries below.
RoadsterSport Max Torque Header! The most torque you can buy in a standard length MX5 Miata header! See Our forum ND thread for many more details on development history, pictures of prototypes, and dyno work. A great choice for street customers looking for complete system that has a mild purr while cruising to work during the week and throaty rumble when pushing hard on your favorite off-ramp or canyon road.
MX5 Miata Header features:
-Same 4-2-1 configuration as the factory header but with much longer and much bigger diameter primaries for more horsepower and maximum TORQUE curve in a standard length header.
We have included a number of extra features into our MX5 Miata Header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
RoadsterSport Stainless Steel Standard Midpipe. All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is larger diameter than stock at 2.5 inches all the way through for max performance. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved).
The header and midpipe are legal for offroad race use only in California, and not CARB approved at this time.
RoadsterSport "Super-Q" Header Version Stainless Steel Premium Adjustable Sound MX5 Miata Muffler. Smooth mandrel bent tubing redirects the flow for a side entrance to the muffler where we engineered a three chamber design. It would be much cheaper to just use a single big muffler with nothing but perforated pipe through the center surrounded by sound absorbing materials, but doing it right with the three chamber design allows us to tailor precisely the FUN sound you want when you push it toward redline, without the harsh drone on decel that the more simple designs make you suffer.
This triple chamber design features an exclusive 'Helmholtz Resonator' first chamber that massively reduces the standing wave inside the exhaust system, reducing the 'booming' tendency by over 50db inside a top up Miata cabin that is common on many aftermarket Miata exhausts. To create this Helmholtz chamber we outfitted our 2016 ND Gen Miata with a computer and sound analyzer and microphones and drove it under varying conditions and loads and without the stock muffler for the computer to carefully measure the sound spectrum coming out the stock midpipe. We then use that data and some special software to calculate the particulars of the Helmholtz chamber size and valve specs to precisely knock down the frequencies we do not want to hear in the new Miata while allowing the good throaty burble fun sounds to pass through. The result is deep throaty fun, without the drone!
The Helmholtz chamber gives this muffler a dual personality, under decel it is super mild and quiet, yet when you push hard toward redline it gets more fun and racy! With the top down lots of fun throaty burble, but dramatically more tame when the top is up. In brief, FUN when you want it, and yet totally mild when just cruising top up.
Includes our famous RoadsterSport Super Light 3.5 rolled tip.
|,|"Shipping cost" "add(+$149)"|-||-|||-||61-2085|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport Complete Street Exhaust Combo With Ceramic Coated Header 2016-2020|,|61-2085|,|2,755.00|,|2,380.00|,||,||,||,||,||,||,|RoadsterSport Complete Street Exhaust Combo With Ceramic Coated Header 2016-2020
Includes our Made In America All Stainless Steel Lifetime Warranty
*Roadstersport Max Torque Header, Ceramic Coated
*RoadsterSport Midpipe
*RoadsterSport-SuperQ Header Version Exhaust
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links, just short summaries below.
RoadsterSport Max Torque Header! The most torque you can buy in a standard length MX5 Miata header! See Our forum ND thread for many more details on development history, pictures of prototypes, and dyno work. A great choice for street customers looking for complete system that has a mild purr while cruising to work during the week and throaty rumble when pushing hard on your favorite off-ramp or canyon road.
MX5 Miata Header features:
-Same 4-2-1 configuration as the factory header but with much longer and much bigger diameter primaries for more horsepower and maximum TORQUE curve in a standard length header.
We have included a number of extra features into our MX5 Miata Header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
RoadsterSport Stainless Steel Standard Midpipe. All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is larger diameter than stock at 2.5 inches all the way through for max performance. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved).
The header and midpipe are legal for offroad race use only in California, and not CARB approved at this time.
RoadsterSport "Super-Q" Header Version Stainless Steel Premium Adjustable Sound MX5 Miata Muffler. Smooth mandrel bent tubing redirects the flow for a side entrance to the muffler where we engineered a three chamber design. It would be much cheaper to just use a single big muffler with nothing but perforated pipe through the center surrounded by sound absorbing materials, but doing it right with the three chamber design allows us to tailor precisely the FUN sound you want when you push it toward redline, without the harsh drone on decel that the more simple designs make you suffer.
This triple chamber design features an exclusive 'Helmholtz Resonator' first chamber that massively reduces the standing wave inside the exhaust system, reducing the 'booming' tendency by over 50db inside a top up Miata cabin that is common on many aftermarket Miata exhausts. To create this Helmholtz chamber we outfitted our 2016 ND Gen Miata with a computer and sound analyzer and microphones and drove it under varying conditions and loads and without the stock muffler for the computer to carefully measure the sound spectrum coming out the stock midpipe. We then use that data and some special software to calculate the particulars of the Helmholtz chamber size and valve specs to precisely knock down the frequencies we do not want to hear in the new Miata while allowing the good throaty burble fun sounds to pass through. The result is deep throaty fun, without the drone!
The Helmholtz chamber gives this muffler a dual personality, under decel it is super mild and quiet, yet when you push hard toward redline it gets more fun and racy! With the top down lots of fun throaty burble, but dramatically more tame when the top is up. In brief, FUN when you want it, and yet totally mild when just cruising top up.
Includes our famous RoadsterSport Super Light 3.5 rolled tip.
|,|"Shipping cost" "add(+$149)"|-||-|||-||11-1033BG|,|19MAMIEXCACO|,|RoadsterSport High Performance Miata Catalytic Converter-CALIFORNIA VERSION 1996-1997|,|11-1033BG|,|889.00|,|768.00|,||,||,||,||,||,||,|RoadsterSport High Performance Miata Catalytic Converter-CALIFORNIA VERSION 1996-1997
RoadsterSport High Performance replacement catalyst for your Miata.
YES...CARB Exempt for OBDII, (NEW CARB CORE 448005).
YES, includes gaskets and hardware!
Made in the USA, All Stainless Steel flanges mean years of quality performance and all the stainless parts have a lifetime warranty (300-cell ceramic catalytic converter used on all units sold in 2012 or later includes a 5 yr/50,000 mile manufacturing defect warranty on its housing and 25,000 mile manufacturing defect warranty on the internals).
APPLICATION NOTES FOR UK cars...UK MX5s with a 1996 P registration or later may require the use of a RoadsterSport or other aftermarket exhaust to use this catalytic converter. The factory cat on those Miats is longer (475mm instead of 440mm) and the exhaust system is not compatible with our cat.
|,|||-||MICACO19CAVE|,|19MAMIEXSYMU|,|RoadsterSport High Performance Miata Catalytic Converter-CALIFORNIA VERSION 1994-1995|,|11-1033B|,|1,250.99|,|978.00|,||,||,|0.000 |,||,||,||,|RoadsterSport High Performance Miata Catalytic Converter-CALIFORNIA VERSION 1994-1995
RoadsterSport CARB replacement catalyst for your Miata.
YES, CARB Exempt for OBDII (NEW CARB 332105).
YES, includes gaskets and hardware needed for installation in your Miata!
Made in the USA, All Stainless Steel flanges mean years of quality performance and all the stainless parts have a lifetime warranty (300-cell ceramic catalytic converter used on all units sold in 2012 or later includes a 5 yr/50,000 mile manufacturing defect warranty on its housing and 25,000 mile manufacturing defect warranty on the internals).
|,|||-||MICACO191|,|19MAMIEXSYMU|,|RoadsterSport High Performance Miata Catalytic Converter-FEDERAL Version 1994-1997|,|11-1033FED|,|459.99|,|334.00|,||,||,|5.000 |,||,||,||,|RoadsterSport High Performance Miata Catalytic Converter-FEDERAL Version 1994-1997
RoadsterSport High Performance replacement catalyst for your Miata at one third of the cost of the smaller diameter dealer units.
YES, EPA legal converter core (EPA 94106). FEDERAL VERSION, NOT FOR SALE TO CALIFORNIA RESIDENTS.
YES, includes gaskets and hardware needed for installation in your Miata!
Yes, 2.5 inch stainless pipe and laser cut flanges!
Yes, bolt holes are slotted so you can squeeze this 2.5 inch diameter unit into the factory space... but it has the flow for use with any of our performance Miata exhausts from RoadsterSport to Racing Beat, Borla, etc.
Made in the USA, All Stainless Steel flanges mean years of quality performance and all the stainless parts have a lifetime warranty (300-cell ceramic catalytic converter used on all units sold in 2012 or later includes a 5 yr/50,000 mile manufacturing defect warranty on its housing and 25,000 mile manufacturing defect warranty on the internals).
This is FEDERAL VERSION, NOT CARB LEGAL, not legal for street and/or highway driving in California.
|,|||-||20ROEX|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport II Stainless Steel Duals for MX-5 Miata 2006-2015|,|GWR-601218|,|959.99|,|748.00|,||,||,|10.000 |,||,||,||,|RoadsterSport II Stainless Steel Duals for MX-5 Miata 2006-2015
Our new NC RoadsterSport Mazda MX-5 Miata exhaust! This Miata exhaust delivers the zoom-zoom that the factory should have. Very mild at cruise at 3500 to 4500 rpms, it has a nice deep purr when you step on it.
This is an all polished stainless steel Miata exhaust for many years of Miata performance. The factory exhaust on the NC MX-5 Mazda Miata is one of the few places that Mazda wasted a good amount of weight. The thick mild steel stock Miata muffler canister on the NC Miata saves Mazda a lot of money but it alone is over 26 pounds!
This stainless steel Miata exhaust uses the factory spacing, factory cutouts, and factory layout but saves 7 pounds of weight and adds more of a classic sports car sound. Note that the Magneflow system is 45 pounds, which is why we worked hard to take weight off by using higher density packing and higher perforation rate cores to bring our weight below stock level. Adds about 8 horsepower.
Finished in three inch tips which INCLUDE our exclusive baffle cone inserts which are REMOVEABLE and allow you to set the sound to sporty...or extra sporty. With the baffle out the sound is about 30% more than stock. With the baffle in the sound is closer to 25% over stock. Baffles are retained by small hex bolts inserted from well under each tip.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||61-2028|,|20MAMIEXHECO|,|RoadsterSport MAX Power 1.8 Inch NC Header - Ceramic Coated 2006-2015|,|61-2028|,|1,249.00|,|993.00|,||,||,||,||,||,||,|RoadsterSport MAX Power 1.8 Inch NC Header - Ceramic Coated 2006-2015
DESCRIPTION
Power Made Here! Hand made here in the USA with lifetime warranty our BIG 1.875 inch primary NC header has become the standard for big power NC builds, particularly those with superchargers and 2.5 liter conversions. MONSTER 1.875 inch primaries AND BRIGHT SILVER ceramic coating! Also works great on 2.0 so well that we eliminated our older 1.6 inch primary header.
Look at those smooth curves! Notice you don't see 6 welded sections for each primary like so many lesser headers that are made from cut pieces of standard radius pipe and straights. Instead, where possible ultra SMOOTH all mandrel bent tube is used here to keep flow as clean as possible. Sexy all T304 polished stainless steel is formed into massive 1.8 inch primaries for max power...with a lifetime warranty!
We put incredible effort into making the exit at the collector as smooth and perfect as we can get it because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible. Note we use the factory collector gasket....so our fit is as factory-like as possible.
Our collector outlet is 2.5 inches. For best performance customers should match our header with our midpipe and exhaust so they are running 2.5 inches of flow all the way...but our header will bolt in place of the factory header and connect perfectly to the factory midpipe.
This header has become the most popular choice for enthusiasts doing 2.5 conversions for consistent big power and torque results. This header is our top recommendation for any customers considering 2.5 liter motors.
OXYGEN SENSORS:
Several options on what to do with the O2 sensors with our header. Read below for options A, B and C. Optional oxygen sensor wire extension cables are available as an add-on option with this header. Adding ONE wire extension gets you one long wire extension to move the secondary oxygen sensor to the midpipe as described in option B below. Adding TWO wire extensions gets you one long and one short wire extension for moving both primary and secondary oxygen sensors down to the midpipe as described in option A below.
A) Buy our midpipe and our two wiring extensions available here for simple plug and play install. Our midpipes are designed to take both O2 sensors, and includes two O2 sensor connections for that - one before the midpipe's converter and one after the midpipe's converter to help avoid a code. Buy BOTH of our extensions for that option.
B) Second choice and most common choice is first sensor in the header and second sensor in our midpipe after the converter, which will also avoid a code. For install in the midpipe of both sensors you need both O2 extension cords, but if you put the first sensor in the header you only need an extension for the second sensor. The first sensor will reach header connection but you may have to follow the wires back to the harness and use a razor blade to clear some sheath which has them gathered shorter than they actually are.
C) Third choice is to put BOTH sensors in the header, which will cause a code unless your tuner turns off the code caused by having the second sensor in the header. You don't need any wiring extensions for that option (sensors will reach header connection but you may have to follow their wires back to the harness and use a razor blade to clear some sheath which has them gathered shorter than they actually are).
NOTES ON CERAMIC COATING. Frankly, it is usually only the mild steel headers that are ceramic coated and I had always suspected that the main reason was to slow down the inevitable rust that a mild steel header will suffer over time. Since this header is already made in ALL STAINLESS STEEL, it does not need ceramic coating for rust prevention. That left the pure question of whether or not we could really find additional torque with the ceramic coating to justify the costs. After lots of testing the answer turned out to be YES, our BRIGHT ceramic coating was consistently ~3% stronger across all points on the curve.
CARB NOTICE: Installing this header in the 2006 through 2015 MX5 Miata means removing the first catalytic converter which means this header will NEVER be a California street legal header, never be CARB approved (and therefore legal in California for off road use only). Sorry, we will not ship these to residents of California. Note that there are states in addition to California that now follow the California model and require CARB compliance, please check the rules of your state before ordering, in some states this setup is legal only for race cars and may never be used on public highway.
BRIAN'S APPLICATION NOTES: This is THE header for peak power on the NC with 2.0 and supercharger or 2.5 liter conversion. For a long time we suspected it was a bit big for normal street driven 2.0 liter motors but customer dyno work has more recently shown that it beats our smaller 1.6 inch primary header at all points of the curve. This header is BIG, it will NOT fit with AWR lowering mounts, our lowering brackets, there is just no room remaining to lower the motor with this big pipe header. We usually use our RoadsterSport engine mounts with this header.
The first converter is also a pretty good resonator so understand that installation of any header will raise the exhaust sound level a good 20%. Therefore, we strongly recommend the RoadsterSport Q muffler with any header change because it was designed to handle the sound level of the header, and our RoadsterSport Helmholtz midpipe tunes the final sound result for drone free fun.
FITMENT NOTES:
YES this header fits with the automatic transmission with a bit of grinding. There is a minor clearance issue between the edge of the header's bottom flange and the auto transmission. Some grinding needs to be done to knock the corner of the flange down a hair and then everything will fit. This header is SO BIG that there is NO AVAILABLE SPACE TO LOWER THE MOTOR WITH OUR LOWERING BRACKETS OR LOWERING MOUNTS! We suggest our RoadsterSport MX-5 Competition Motor Mounts with all 2.5 conversions, item 61-1713 on our site. We assume Left Hand Drive fitment only, we have not installed this big header on cars other than USA/Canada versions.
|,|"Oxygen Sensor Extension Wires" "No" "One O2 Sensor Extension add(+$65)" "Two O2 Sensor Extension add(+$120)"|-||-|"Shipping Cost" "add(+$79)"|-||-|||-||61-0080CERAMIC|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport MAX POWER MX5 Complete Exhaust Combo WITH UPGRADE to Ceramic Coated Header 2006-2015 |,|61-0080Ceramic|,|2,885.00|,|2,378.00|,||,||,||,||,||,||,|RoadsterSport MAX POWER MX5 Complete Exhaust Combo WITH UPGRADE to Ceramic Coated Header 2006-2015
As the leader in ALL STAINLESS Miata exhausts we are proud to present our:
COMPLETE Plug and Play MX5 Miata Exhaust Combo!
Includes: Made In America All Stainless Steel Lifetime Warranty!
Includes:
*Roadstersport Max Power Header CERAMIC COATED VERSION
*RoadsterSport Midpipe
*RoadsterSport Super-Q exhaust
*Both Plug and Play O2 Extension cables- needed to relocate both factory O2 sensors to the Midpipe.
Simple Bolt on for MANUAL TRANSMISSION ONLY, can be installed on Automatic but see page four of our forum header install thread for details of what is required.
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links (sample video bottom of this page!), just short summaries below. Entire system saves 25 pounds over stock and adds torque from low rpms to redline that you can feel.
RoadsterSport Max Power Header! Gorgeous all T304 polished stainless steel max flow MX5 Miata header. Lifetime warranty. We have included a number of features into our MX5 Miata header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
We also put incredible effort into making the exit at the collector as smooth and perfect as we can get it because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible. Note we use the factory collector gasket....so our fit is as factory-like as possible. Note that we have no O2 sensor connection in our header....in part to keep flow as clean as we can get it, but also because we could see no purpose in locating them in the header since doing so will throw a code because pulling the factory header includes removal of the first catalytic converter (code is avoided by using our included extension cables shown in the picture to locate sensors to before and after our midpipe converter).
RoadsterSport Stainless Steel Midpipe. All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is slightly larger diameter than stock at 2.5 inches all the way through. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved). Uses monster 18 inch resonator because when you uncork this NC MX5 Miata motor it wants to get loud unless you use a resonator this large (by comparison stock resonator is about a foot long). Stock midpipe is 20 pounds, our midpipe is 16.5 pounds for total savings of 3.5 pounds. Despite very large resonator, this midpipe will raise the final sound level just sightly because of the higher flow larger diameter tubing. Our midpipe is designed to take both O2 sensors...and includes two O2 sensor connections...one before the midpipe's converter and one after the midpipe's converter to help avoid a code by simulating the factory installation before.
CARB NOTICE: Installing a header in the new 2006 through 2013 Miata means removing the first catalytic converter which means there can NEVER be a street legal header for this vehicle. Thus, the header is legal for offroad race use only, and can NEVER be CARB approved.
RoadsterSport "Super-Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust. Our Best! We make Five different Miata exhaust choices for the 2006 and newer MX5 Miata, including the RoadsterSport RACE, RoadsterSport STREET Single, the RoadsterSport II Duals, the RoadsterSport Q, and this premium duals unit we affectionately call the RoadsterSport Super-Q. This attenuation chamber design unit is the most mild and mellow on an otherwise stock Miata...about 10 to 15% louder than stock...with a deep burble. This unit was designed for both improved flow performance AND the best sound absorbing ability possible. This premium MX5 muffler is the BEST choice for those who plan such additional mods as a supercharger or header change (which unleashes a massive amount of additional sound). This attenuation design is also a premium "NO-DRONE" choice for those with the AUTOMATIC transmission which tends to keep the RPMS in the lower ranges. By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....ALL THE FLOW, without the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.
RoadsterSport MAX POWER MX5 Complete Exhaust Combo...WITH UPGRADE to Ceramic Coated Header
2006-2015
CERAMIC COATED STAINLESS STEEL Header, Midpipe, and Super-Q Exhaust!
Miata MX5 2006-2015 · Exhaust
Part Number: 61-0080Ceramic
Application: 2006-2015
Retail Price: $1,485.00
Dealer Sale Price: $1,231.65
Quantity:
RoadsterSport MAX POWER MX5 Complete Exhaust Combo...WITH UPGRADE to Ceramic Coated Header
Rate This Product Now
As the leader in ALL STAINLESS Miata exhausts we are proud to present our:
COMPLETE Plug and Play MX5 Miata Exhaust Combo!
Includes: Made In America All Stainless Steel Lifetime Warranty!
Includes:
*Roadstersport Max Power Header CERAMIC COATED VERSION
*RoadsterSport Midpipe
*RoadsterSport Super-Q exhaust
*Both Plug and Play O2 Extension cables- needed to relocate both factory O2 sensors to the Midpipe.
Simple Bolt on for MANUAL TRANSMISSION ONLY, can be installed on Automatic but see page four of our forum header install thread for details of what is required.
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links (sample video bottom of this page!), just short summaries below. Entire system saves 25 pounds over stock and adds torque from low rpms to redline that you can feel.
RoadsterSport Max Power Header! Gorgeous all T304 polished stainless steel max flow MX5 Miata header. Lifetime warranty. We have included a number of features into our MX5 Miata header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
We also put incredible effort into making the exit at the collector as smooth and perfect as we can get it because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible. Note we use the factory collector gasket....so our fit is as factory-like as possible. Note that we have no O2 sensor connection in our header....in part to keep flow as clean as we can get it, but also because we could see no purpose in locating them in the header since doing so will throw a code because pulling the factory header includes removal of the first catalytic converter (code is avoided by using our included extension cables shown in the picture to locate sensors to before and after our midpipe converter).
RoadsterSport Stainless Steel Midpipe. All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is slightly larger diameter than stock at 2.5 inches all the way through. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved). Uses monster 18 inch resonator because when you uncork this NC MX5 Miata motor it wants to get loud unless you use a resonator this large (by comparison stock resonator is about a foot long). Stock midpipe is 20 pounds, our midpipe is 16.5 pounds for total savings of 3.5 pounds. Despite very large resonator, this midpipe will raise the final sound level just sightly because of the higher flow larger diameter tubing. Our midpipe is designed to take both O2 sensors...and includes two O2 sensor connections...one before the midpipe's converter and one after the midpipe's converter to help avoid a code by simulating the factory installation before.
CARB NOTICE: Installing a header in the new 2006 through 2013 Miata means removing the first catalytic converter which means there can NEVER be a street legal header for this vehicle. Thus, the header is legal for offroad race use only, and can NEVER be CARB approved.
RoadsterSport "Super-Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust. Our Best! We make Five different Miata exhaust choices for the 2006 and newer MX5 Miata, including the RoadsterSport RACE, RoadsterSport STREET Single, the RoadsterSport II Duals, the RoadsterSport Q, and this premium duals unit we affectionately call the RoadsterSport Super-Q. This attenuation chamber design unit is the most mild and mellow on an otherwise stock Miata...about 10 to 15% louder than stock...with a deep burble. This unit was designed for both improved flow performance AND the best sound absorbing ability possible. This premium MX5 muffler is the BEST choice for those who plan such additional mods as a supercharger or header change (which unleashes a massive amount of additional sound). This attenuation design is also a premium "NO-DRONE" choice for those with the AUTOMATIC transmission which tends to keep the RPMS in the lower ranges. By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....ALL THE FLOW, without the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.
INSTRUCTIONS:
MUFFLER installation hints and notes in our forum Installation Instruction Section! --- CLICK HERE TO READ MORE.
MIDPIPE installation hints and notes in our forum Installation Instruction Section! --- CLICK HERE TO READ MORE.
HEADER installation hints and notes in our forum Installation Instruction Section! --- CLICK HERE TO READ MORE.
SOUND Files and DYNO at our Exhaust Blog---CLICK HERE TO LISTEN AND READ MORE.
.
MAY 2012 Update: New Tip Design! Had many requests for a new thicker rolled tip. The problem with the rolled tips that all our competitors use is that they are very heavy, which helps partially explain the ugly fact our competitors don't want to admit...which is that most our competition is HEAVIER than the stock muffler. As a famous racer once said, weight is the enemy, and making a muffler that is heavier than stock and calling it a 'performance' muffler is not our style here. So, it took a big investment in new equipment to come up with a rolled tip that didn't add weight to our best performance design. Yes, still works with, and includes, our unique removeable baffles that put YOU in control over final sound levels.
To maximize your results as we did here consider our MOTO-EAST ECU REFLASH
Take a ride in our 2006 with this full RoadsterSport Header, Midpipe and Exhaust.
INSTALL NOTES
Read full installation hints and notes in our forum Installation Instruction Section! The secret is LUBE your hangers well with dishsoap so you can get flanges aligned properly, and torque the supplied hardware to NO MORE THAN 25-30 ft/lbs (using more torque will actually result in LESS seal because you will pucker the flange out at the middle).
DYNO from our own Project 2006. Red line is best STOCK result. Blue line is best result with this RoadsterSport Max Power Header, RoadsterSport Midpipe and RoadsterSport exhaust...plus our MotoEast tune to raise the redline (intake is still STOCK). Notice lots MORE power from idle to Redline, lots more TORQUE from idle to redline, making the car much faster and more fun to drive!
|,|"Shipping cost" "add(+$169)"|-||-|||-||61-0080CERAMICHELM|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport MAX POWER MX5 COMPLETE EXHAUST COMBO WITH UPGRADE TO CERAMIC COATED HEADER and HELMHOLTZ Midpipe 2006-2015 |,|61-0080CeramicHelm|,|2,885.00|,|2,325.00|,||,||,||,||,||,||,|RoadsterSport MAX POWER MX5 COMPLETE EXHAUST COMBO WITH UPGRADE TO CERAMIC COATED HEADER and HELMHOLTZ Midpipe 2006-2015
CERAMIC COATED STAINLESS STEEL Header, Helmholtz Midpipe, and Super-Q Exhaust!
As the leader in Miata exhausts we are proud to present our:
COMPLETE PREMIUM STAINLESS Plug and Play MX5 Miata Exhaust Combo!
Includes: Made In America All Stainless Steel Lifetime Warranty!
Includes:
*Roadstersport Max Power Header CERAMIC COATED VERSION
*RoadsterSport HELMHOLTZ Midpipe
*RoadsterSport Super-Q exhaust
*Both Plug and Play O2 Extension cables- needed to relocate both factory O2 sensors to the Midpipe.
Simple Bolt on for MANUAL TRANSMISSION ONLY, can be installed on Automatic but see page four of our forum header install thread for details of what is required.
See Extensive additional information in the product listings for each of these items elsewhere on our MX5 exhaust page, including dyno and video links (sample video bottom of this page!), just short summaries below. Entire system saves 25 pounds over stock and adds torque from low rpms to redline that you can feel.
RoadsterSport Max Power Header! Gorgeous all T304 polished stainless steel max flow MX5 Miata header. Lifetime warranty. We have included a number of features into our MX5 Miata header which we believe customers will appreciate. We CNC machine the main flange to match the factory unit, including the bolt hole flange area thicknesses so that we are precisely replicating the factory fit to the head in terms of thread depth and space, etc.
We also put incredible effort into making the exit at the collector as smooth and perfect as we can get it because this collection point is the KEY to good header flow and we had to make sure this was done as perfect as possible. Note we use the factory collector gasket....so our fit is as factory-like as possible. Note that we have no O2 sensor connection in our header....in part to keep flow as clean as we can get it, but also because we could see no purpose in locating them in the header since doing so will throw a code because pulling the factory header includes removal of the first catalytic converter (code is avoided by using our included extension cables shown in the picture to locate sensors to before and after our midpipe converter).
RoadsterSport Stainless Steel HELMHOLTZ Midpipe. A revolution in exhaust technology finally in a Miata application, this midpipe features an exclusive Helmholtz Resonator that massively reduces the standing wave 'boominess' inside the exhaust system BEFORE it gets to your muffler of choice! Cuts the 'booming' frequencies of 120-130hz by 48+db inside a top up Miata cabin which is a common source of complaints with aftermarket exhausts on the MX5.
We outfitted our Project 2012 PRHT Miata with a computer and sound spectrum analyzer and microphones and drove it under varying conditions and loads with mufflers and without any muffler to measure the frequencies coming out the midpipe. We then use that data and some special software to calculate the particulars of the Helmholtz chamber needed to precisely knock down the frequencies we do not want to hear while allowing the good throaty burble fun sounds to pass through. The result is all the fun, an almost exotic burble throaty result, without the drone! Note it is very dual personality because the effect of the Helmholtz is very frequency specific such that under decel it is mild and quiet, yet when you push hard toward redline it sounds exotic and racy. With the top down lots of fun throaty burble, but dramatically more tame when the top is up. In brief, FUN when you want it, and mild when just cruising.
Our midpipe is designed to take both O2 sensors...and includes two O2 sensor connections...one before the midpipe's converter and one after the midpipe's converter to help avoid a code by simulating the factory installation before.
CARB NOTICE: Installing a header in the new 2006 through 2015 Miata means removing the first catalytic converter which means not CARB approved. Thus, the header is legal for offroad race use only, and can NEVER be CARB approved.
RoadsterSport "Super-Q" Stainless Steel Premium Adjustable Sound MX5 Miata Exhaust. Our Best! We make Five different Miata exhaust choices for the 2006 and newer MX5 Miata, including the RoadsterSport RACE, RoadsterSport STREET Single, the RoadsterSport II Duals, the RoadsterSport Q, and this premium duals unit we affectionately call the RoadsterSport Super-Q. This attenuation chamber design unit is the most mild and mellow on an otherwise stock Miata...about 10 to 15% louder than stock...with a deep burble. This unit was designed for both improved flow performance AND the best sound absorbing ability possible. This premium MX5 muffler is the BEST choice for those who plan such additional mods as a supercharger or header change (which unleashes a massive amount of additional sound). This attenuation design is also a premium "NO-DRONE" choice for those with the AUTOMATIC transmission which tends to keep the RPMS in the lower ranges. By using smooth mandrel bent 2.5 inch tubing to redirect the flow for a side entrance to the muffler we engineered a sound wave attenuation first chamber to knock down volume level dramatically while maintaining a flow-through design. Our latest and best dyno results for the header change which are in our forum were obtained with this muffler....ALL THE FLOW, without the noise! Yes, simple BOLT ON that bolts to our midpipe, or the factory midpipe, or our Racing Beat midpipes. Weight is 24 pounds.
INSTALL NOTES
Read full installation hints and notes in our forum Installation Instruction Section! The secret is LUBE your hangers well with dishsoap so you can get flanges aligned properly, and torque the supplied hardware to NO MORE THAN 25-30 ft/lbs (using more torque will actually result in LESS seal because you will pucker the flange out at the middle).
DYNO from our own Project 2006. Red line is best STOCK result. Blue line is best result with this RoadsterSport Max Power Header, RoadsterSport Midpipe and RoadsterSport exhaust...plus our MotoEast tune to raise the redline (intake is still STOCK). Notice lots MORE power from idle to Redline, lots more TORQUE from idle to redline, making the car much faster and more fun to drive!
|,|"Shipping cost" "add(+$165)"|-||-|||-||61-1824|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport MAX TORQUE Standard Length MX5 Miata Stainless Header 2016-2020|,|61-1824|,|799.00|,|628.00|,||,||,||,||,||,||,|RoadsterSport MAX TORQUE Standard Length MX5 Miata Stainless Header 2016-2020
Quality header construction starts with mandrel bent 304 stainless construction, making this the ONLY MX5 Miata header choice proudly made in the USA with LIFETIME warranty! Beware the choices that are just straight pipe and sharp 90 degree bends welded up in Taiwan and China, they won't last and they won't give max performance in return for the trouble of installing them.
Saves over 4 lbs compared to the factory header.
Stock header weight: 13.15 lbs
Max Torque header weight: 9.05 lbs!
HEAR it now from the tailpipe on the dyno! This full throttle with camera right at the tailpipe so this massively exaggerates the volume but gives you good feel for the character and tone at full throttle. You are hearing ALL THREE of the following here: RoadsterSport Max Power Header, plus the RoadsterSport Midpipe and RoadsterSport SuperQ Muffler. The midpipe and muffler obviously not included with the header, sold separate on this site. Fits both RHD and LHD, manual and automatic.
Now details on our header and why you want it. For the FIRST TIME Mazda went with 4-2-1 factory header layout to make that fat midrange that makes the ND so quick. Many magazines get 0-60 in stock form at about 6 seconds flat, which is obviously not about the mere 155 hp that the factory rates this motor at the crank. We tested ND headers in both 4-1 layout as we have done in the past on NC generation, and 4-2-1 layout and quickly understood the factory thinking...this motor is about TORQUE, and this motor wants a 4-2-1 layout to maximize what this Skyactiv motor is designed to do.
Thus, first thing to know about the Skyactiv 2.0 motor is that a highflow 4-2-1 makes the midrange as beefy as you can get it.
Sadly, most folks only think HP and do not understand torque, but it is the really wide TORQUE curve of ND that makes it so quick compared to prior Miatas, and our humble opinion is that it is best to play to that strong point, give the ND skyactiv motor what it wants!
The results of going 4-2-1 are clear in the dyno results at bottom of this page, meaty torque start to finish (note results include Orange Virus Tune).
We strongly recommend the RoadsterSport SuperQ Header version muffler with this header because it was designed to handle the sound level of the header and our standard midpipe, most other mufflers will be too loud for most folks with this header change.
Our outlet is 2.5 inches. For best performance customers should match our header with our RoadsterSport midpipe and RoadsterSport SuperQ exhaust (special header version STRONGLY recommended) so they are running 2.5 inches of flow all the way...but our header will bolt in place of the factory header and connect perfectly to the factory midpipe (however doing that would mean an engine code unless you move second sensor after midpipe converter like our RoadsterSport midpipe provides plug and play).
Factory first O2 sensor is in the OEM header and stays in our header without use of extension cords. Factory second sensor in the midpipe should be moved after the factory midpipe converter to avoid an engine code (our RoadsterSport midpipe provides bung in that location for this reason). That second sensor reaches its new location without use of extension cords. Bottom line is full plug and play install...but we strongly suggest our Orange Virus or MotoEast Tune to get max torque results.
CARB NOTICE: Installing this header in the MX5 Miata means removing the first catalytic converter which means this header will NEVER be a California street legal header, never be CARB approved (and therefore legal in California for off road use only). Sorry, we will not ship this to residents of California.
BRIAN'S APPLICATION NOTES:
INSTRUCTIONS....see our installation discussion in the Instructions Section. Complete factory service manual install page with torque specs is below. Note that NO gaskets or hardware included. We assume most customers will do it right and install our RoadsterSport midpipe at the same time for best torque results and because it avoids engine codes with O2 locations before and after the midpipe converter that you can reach without use of extension cords. Use again the factory ring gasket on the stock header which matches the factory midpipe flange. Stock gasket at the motor to header flange is stack of stainless plates, not crush gaskets, and can be used over and over without issue.
We are aware of competitors with 4-1 shorty headers but all their customers seem to report about 150-160 range at the wheels, if they will report at all. Even when some of those 4-1 headers cost double, it seems few want to admit they spent double the money for no additional benefit. In sum: year after year no dyno graphs posted anywhere of more gains before/after for shorty header than this unit in independent customer dyno tests!
Chart below of our ND on third party dyno shows comparison with baseline stock run. Notice 168 horsepower and BIG TORQUE, 171 FtLb at the wheels. If unfamiliar with reading DYNO graphs what you need to look for is before and after of same car, on same dyno, because what you want to see is the TOTAL GAINS. As you can see in graph below, this ND generation Miata totally stock did 139 hp at the wheels and 136 ft/lbs torque as a baseline from the factory. This Miata was relatively new, likely base number would have come up some without any changes with more break-in time, our other ND Miata with more miles did baseline of 142hp at the wheels. The factory hp rating is at the crank but you spend some of that number getting through the transmission and down to the other end of the car where the rubber actually meets the road. With this RoadsterSport Header, our RoadsterSport Midpipe and SuperQ Muffler we obtained 25+ ft/lbs over most of the rpms range. Result is SUPER meaty midrange where you actually drive the car, making freeway passing just a flick of the pedal, pulling away from stoplights is noticeably stronger than stock. We have used the same for more than a decade. This is a third party dyno, we do not own it. We do not run the dyno, we do not run the car on the dyno. We deliver the car to the dyno and ask the operator to run consistent practices every time. All the units sold to date have been sold with the graph below in this product description, and we hit that number over and over after MANY HOURS of tune work in the car same day by Mat of Orange Virus Tuning. Some customers have not replicated our numbers using other software packages, other brands of dynos, cheaper and lower octane gas, etc. We suspect software being used by all Tuners for ND Miata is still in crude early development stage and it may take a year or more for others to routinely reproduce our numbers here (same thing happened with NC development and our first header for that car a decade ago).
|,|"Shipping cost" "add(+$79)"|-||-|||-||61-1824S|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport MAX TORQUE Standard Length MX5 Miata Stainless Header BRIGHT SILVER CERAMIC FINISH Stainless Steel 2016-2020|,|61-1824S|,|965.90|,|808.00|,||,||,||,||,||,||,|RoadsterSport MAX TORQUE Standard Length MX5 Miata Stainless Header BRIGHT SILVER CERAMIC FINISH Stainless Steel 2016-2020
It was believed to be said originally by Enzo Ferrari, and repeated later by Carroll Shelby, that "Horsepower sells cars, torque wins races." The reason is quite simple, TORQUE is what helps you leap out of tight turns and pushes you away from stoplights, etc. In autocross and track events any advantage at the start of the slower sections is advantage you carry to the end of each section, and torque is what you actually feel pushing you back in the seat. With that in mind, our headers here use a 4-2-1 layout which puts less emphasis on peak hp at top of rpms that you rarely use, and more emphasis on max low and mid range TORQUE that you can use every day, and for victory on race weekends. With the new generation Miata the factory went 4-2-1 on header layout for the first time, this is a much higher flowing version of the same 4-2-1 layout to give you the biggest torque curve possible in a standard length header.
Limited Edition Ceramic Coated. Our regular version is polished stainless, which will bronze and blue in response to the heat of use. As a result, got some requests to do bright silver ceramic coating over the polished stainless, which improves long term appearance and performance (about 3% better dyno results with the ceramic coating). Fits both LHD and RHD.
HEAR it now from the tailpipe on the dyno! This full throttle with camera right at the tailpipe so this massively exaggerates the volume but gives you good feel for the character and tone at full throttle. You are hearing ALL THREE of the following here: RoadsterSport Max Power Header, plus the RoadsterSport Midpipe and RoadsterSport SuperQ Muffler. The midpipe and muffler obviously not included with the header, sold separate on this site.
Now details on our header and why you want it. For the FIRST TIME Mazda went with 4-2-1 factory header layout to make that fat midrange that makes the ND so quick. Many magazines get 0-60 in stock form at about 6 seconds flat, which is obviously not about the mere 155 hp that the factory rates this motor at the crank. We tested ND headers in 4-1 layout as we have done in the past on NC generation, and 4-2-1 layout and quickly understood the factory thinking...this motor is about TORQUE, and this motor wants a 4-2-1 layout to maximize what this Skyactiv motor is designed to do.
Thus, first thing to know about the Skyactiv 2.0 motor is that a highflow 4-2-1 makes the midrange as beefy as you can get it. Sadly, most folks only think HP and do not understand torque, but it is the really wide TORQUE curve of ND that makes it so quick compared to prior Miatas, and our humble opinion is that it is best to play to that strong point, give the ND skyactiv motor what it wants!
The ND will run okay with the header if you skip the tune but it is a VERY complex motor and tune and you do NOT get all the gains if you skip the tune!!
We strongly recommend the RoadsterSport SuperQ Header version muffler with this header because it was designed to handle the sound level of the header and our standard midpipe, most other mufflers will be too loud for most folks with this header change.
Quality header construction starts with mandrel bent 304 stainless construction, making this the ONLY MX5 Miata header choice proudly made in the USA with LIFETIME warranty on construction. Beware the choices that are just straight pipe and sharp 90 degree bends welded up in Taiwan and China, they won't last and they won't give max performance in return for the trouble of installing them.
Our outlet is 2.5 inches. For best performance customers should match our header with our RoadsterSport midpipe and RoadsterSport SuperQ exhaust (special header version STRONGLY recommended) so they are running 2.5 inches of flow all the way...but our header will bolt in place of the factory header and connect perfectly to the factory midpipe (however doing that would mean an engine code unless you move second sensor after midpipe converter like our RoadsterSport midpipe provides plug and play).
Factory first O2 sensor is in the OEM header and stays in our header without use of extension cords. Factory second sensor in the midpipe should be moved after the factory midpipe converter to avoid an engine code (our RoadsterSport midpipe provides bung in that location for this reason). That second sensor reaches its new location without use of extension cords. Bottom like is full plug and play install...but we strongly suggest our Orange Virus or MotoEast Tune as critical to getting maximum torque results in a safe manner.
CARB NOTICE: Installing this header in the MX5 Miata means removing the first catalytic converter which means this header will NEVER be a California street legal header, never be CARB approved (and therefore legal in California for off road use only).
|,|"Shipping cost" "add(+$79)|-||-|||-||61-1734|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport Premium 304 Polished Midpipe 2016-2020|,|61-2660|,|865.05|,|798.00|,||,||,||,||,||,||,|RoadsterSport Premium 304 Polished Midpipe 2016-2020
Includes our Made In America All Stainless Steel Lifetime Warranty
Roadstersport 304 stainless polished midpipe. Folks asked us to update our midpipe offerings to include ALL Polished 304 stainless, which we were previously missing, but now we have it! Carries over popular features from MaxMidpipe including big 5 inch body converter for max flow and longevity and extra large resonator for best rasp control.
We have the ONLY full 5 inch diameter body ultra highflow 200 CPI converter ND Midpipes on the market. Most other choices on the market are 4 inch body cats, this 5 inch body design flows massively better. The math tells you the big news here: area of a 4 inch circle is 12.6 square inches, area of a 5 inch circle is 19.63 square inches, which means our 5 inch body Converter flows nearly 60% better than a 4 inch design!
INCLUDES O2 SENSOR CONNECTION AFTER CONVERTER which means you are ready to add a performance header (relocating the factory second O2 sensor after the converter in this midpipe to help avoid codes.).
Despite very large resonator, this midpipe will raise the final sound level because of the much higher flow.
SORRY, NOT CARB APPROVED FOR CALIFORNIA RESIDENTS, WE CANNOT SHIP TO A CALIFORNIA ADDRESS.
INSTRUCTIONS....see installation instructions in our forum in the Instructions Section, RoadsterSport Midpipe install page 4 and beyond...and note this unit is plug and play on Manual Transmission cars, we have NOT fit it to Automatic cars.
All install hardware is included.
|,|"Shipping cost" "add(+$89)"|-||-|||-||RORAMU7PO|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport RACE Muffler 2006-2015 - Just 8 Pounds!|,|GWR-601326|,|329.99|,|298.00|,||,||,|5.000 |,||,||,||,|RoadsterSport RACE Muffler 2006-2015 - Just 8 Pounds!
This is for the autocross and track Mazda MX-5 Miata drivers and any other MX-5 Miata owner who wants a SIMPLE AND PROPER SINGLE SIDED MX-5 MIATA EXHAUST.
Let's face facts, dual exhausts on a straight four cylinder Miata is a ridiculous waste of weight. Mazda talks about gram strategy in the development of this new Miata but they wasted a lot of weight on duals that provide no performance benefit and lots of extra weight. Yes, this RACE exhaust is on the louder side of our choices but what the racers need to know is that max recorded db under SCCA guidelines at an SCCA autocross event by none other than four time national champ George Doganis was just 82 db....well within all track and autocross limits and low enough that many will run this miata exhaust on their daily driver and love it.
Just 7 pounds means this miata muffler is almost 20 pounds less than the stock miata muffler! How do we do it? By using a higher than normal perforation rate on the straight through super high density core to get maximum sound supression with absolutely minimal weight.
This seven pound MX-5 Miata exhaust compares with 19 pounds for our RoadsterSport MX-5 Miata Duals and over 26 pounds for the factory exhaust. Does NOT include baffle insert like the RoadsterSport Miata Duals, but we offer separate special optional baffle insert.
APPLICATION: 2006-2015
SHIPPING NOTE...ships factory direct to you, in stock now. All POLISHED stainless steel construction and LIFETIME warranty. Uses stock hangers and connects to either our midpipe or the stock midpipe.
Proudly made in the USA. Includes mounting gasket and hardware.
|,|"Shipping Cost" "add(+$85)"|-||-|||-||60-13282|,|20MAMIEXHECO|,|RoadsterSport Stainless Double Resonator MX5 Miata Midpipe 2006-2015|,|60-13282|,|795.99|,|592.00|,||,||,||,||,||,||,|RoadsterSport Stainless Double Resonator MX5 Miata Midpipe 2006-2015
Designed as a bolt-on replacement for the factory midpipe to carry the 2.5 inch outlet of the factory header, and our RoadsterSport and Racing Beat headers, all the way to your choice of any of our 2.5 inch inlet RoadsterSport mufflers. **Designed for race use only, not legal for street and/or highway driving in California.**
FITS MANUAL TRANSMISSION ONLY!
This version eliminates the converter in the midpipe in favor of two large resonators. Intended for track customers, particularly those with superchargers. Also bolts up to our Racing Beat exhaust, MazdaSpeed exhaust, stock header and Racing Beat header. Also works well with our RoadsterSport Street Header.
Still includes TWO O2 SENSOR CONNECTIONS. All stainless steel construction for years of driving pleasure. This MX5 Miata midpipe is slightly larger diameter than stock at 2.5 inches all the way through. Uses monster 18 inch resonator and additional 9 inch resonator because when you uncork this NC MX5 Miata motor it wants to get loud unless you use resonators this large (by comparison stock resonator is about a foot long).
Stock midpipe is 20 pounds, our midpipe is 17 pounds for total savings of 3 pounds.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||NESTMINOWSH2|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport Stainless MX-5 Miata Midpipe 2006-2015|,|60-1328|,|1,189.99|,|798.00|,||,||,|5.000 |,||,||,||,|RoadsterSport Stainless MX-5 Miata Midpipe 2006-2015
*Manual Transmission ONLY
Designed to work with our RoadsterSport Duals or RoadsterSport.
Race muffler as a simple bolt on (but will also bolt up to our Racing Beat exhaust, MazdaSpeed exhausts, etc.).
Our midpipe gains 5 to 8 Ft/Lbs of torque from 3500 rpms through 6000 rpms. All stainless steel construction for years of driving pleasure.
This MX-5 Miata midpipe is slightly larger diameter than stock at 2.5 inches all the way through. Uses high quality SPUN catalytic converter with metal core (despite presence of converter this unit is not CARB approved). Uses monster 18 inch resonator because when you uncork this NC MX-5 Miata motor it wants to get loud unless you use a resonator this large (by comparison stock resonator is about a foot long).
Stock midpipe is 20 pounds, our midpipe is 16.5 pounds for total savings of 3.5 pounds. Despite very large resonator, this midpipe will raise the final sound level just sightly because of the higher flow larger diameter tubing.
GO MIATA APPLICATION NOTES: We started with the much larger "two biscuit" cat we use in the 99-05 midpipe system but I didn't like the sound quality that resulted. This small single biscuit spun unit is actually more expensive than the big metal clamshell cat we use in the 1999-2005 system but we did some experimenting with cats of different sizes and the short chambered spun cat helps reduce that 3000 rpm DRONE/ BOOM that this motor really wants to make on decel when uncorked.
The short cat also saves another 1.5 pounds as compared with the bigger cat.
As for sound level...with the big cat the sound volume level was really unchanged as compared with the stock midpipe but we made the tradeoff decision to reduce decel drone but finish with slightly higher overall volume using the short chambered spun cat. I think most will appreciate this choice.
|,|"Select Converter Size" "Select Here" "Standard 4 Inch" "Big 5 Inch add(+$79)"|-||-|"Shipping Cost" "add(+$85)"|-||-|||-||ROMI99|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-1999-2005|,|RoadsterSport Stainless Steel Miata Midpipe with High Flow Catalytic Converter And Resonator 1999-2005|,|GWR-111001|,|1,099.99|,|798.00|,||,||,|5.000 |,||,||,||,|RoadsterSport Stainless Steel Miata Midpipe with High Flow Catalytic Converter And Resonator 1999-2005
The best midpipe available for second generation Miatas! Full 2.5 inches from tip to tip with ultra highflow catalytic converter and resonator. Note that 99-05 Miatas have a factory cat welded into the midpipe which is why ALL the mufflers we sell for 99-05 include only the muffler and not a midpipe (unlike the 90-97 choices). So if you want the flow to connect your new high flow header to your new high flow muffler here it is...for normally aspirated to supercharger or turbo. All stainless steel parts means years of quality performance.
The factory converter for the 1999 to 2005 Miata is a welded in part of the midpipe (California 99-00 Miatas also have second converter in the header assembly).
Complete your highflow exhaust system with this midpipe...this is the best BOLT IN midpipe available for second generation Miatas and includes a highflow converter and built in resonator! Full 2.5 inches from tip to tip in all stainless steel.
ALL the mufflers we sell for 99-05 include only the muffler and not a midpipe (unlike the 90-97 choices). So if you want the flow to connect your new high flow header to your new high flow muffler here it is...for normally aspirated to supercharger or turbo (BUT does NOT fit MAZDASPEED). All stainless steel parts means years of quality performance and all the stainless parts have a lifetime warranty (converter has one year warranty). Not CARB approved and legal in California for offroad vehicles only that may never be used on public roads. To prevent engine codes this midpipe has O2 connection for factory O2 sensor AFTER the converter (see forum instructions). Not for use with Racing Beat's lower rear chassis brace.
(This midpipe is a replacement for the stock midpipe: it fits any setup where the stock midpipe fits. Therefore, it fits all headers and mufflers that connect accurately to the stock midpipe...regardless of brand.)
INSTALL NOTES and CAUTION! Is your Ignition Coil weak or failing? The most common reason people buy this midpipe is that their 1999 or 2000 Miata midpipe converter has failed after 50,000 or more miles. The owners too often assume the failure is simple old age, when in fact the coils on the 1999 and 2000 are notorious for failure beyond 50,000 miles and when the coils get weak and start to fail the car will run too rich and destroy its catalytic converters! If you simply replace the midpipe and don't fix the failing coils then you can expect to quickly kill any replacement converter and that replacement will NOT be a warranty replacement. Therefore, please check your coils if your factory converters have failed and replace them BEFORE you install your new midpipe (we do sell the coils on this website). After the 2000 model year Mazda changed to a MUCH more reliable coil on plug setup.
NOTE: Not compatible with MazdaSpeed Miata
|,|"Shipping Cost" "add(+$89)"|-||-|||-||ROSTSI20JU10|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2006-2012|,|RoadsterSport STREET SINGLE MX-5 Miata Muffler 2006-2015 - Just 12 Pounds!|,|GWR-60-13262|,|749.99|,|498.00|,||,||,|5.000 |,||,||,||,|RoadsterSport STREET SINGLE MX-5 Miata Muffler 2006-2015 - Just 10 Pounds
When considering a performance muffler for your Mazda MX-5 Miata, high rate of flow and good looks are important – but how much does it weigh? We need to stay weight smart with our lower powered sports cars.
This RoadsterSport Single Street MX-5 Miata muffler weighs in at just 10 pounds which is incredible considering the stock muffler weighs a porky 26 pounds! Made completely from polished stainless steel, the 3 section baffles of this muffler has a lifetime warranty. Uses stock hangars and includes mounting gasket and all hardware needed for installation.
This Mazda MX-5 Miata Exhaust was designed for both RACING and STREET. The original RoadsterSport "RACE" is an amazing 7 pounds and designed for the autocross and track MX-5 Miata drivers who need to meet sound limits in the low 90 DB range with absolute minimal weight. Our 7 pound Race has also been a big seller with our younger MX-5 Miata owners seeking to make a statement and have some fun with their street use. However, many asked us to make another single more focused for the street users ... a fun single that is more subtle than our 7 pound Race wonder ... but almost as light. That turned into a tough challenge and after many prototypes you see the production version here. Why a single for street users? Let's face facts, dual exhausts on a straight four cylinder Miata is a ridiculous waste of weight for the serious sports car enthusiast (Mazda talks about gram strategy in the development of this MX-5 Miata but they wasted a lot of weight on duals that provide no performance benefit over singles YET lots of extra weight).
Just 10 pounds means this MX-5 miata muffler is about 16 pounds less than the stock Mazda MX-5 miata muffler! How do we do it? For this design we started with our 7 pound Race and added more diameter filled with sound suppression materials and we separated the sound suppression chamber into THREE internally baffled chambers for sound wave attenuation in what is still a highflow design. By using a higher than normal perforation rate on the super high density core, WITH three internally baffled sections, we get absolutely minimal weight and sound for a 10 pound single. This 10 pound Miata exhaust compares with 19 pounds for our RoadsterSport Miata Duals and over 26 pounds for the factory exhaust. Does NOT include baffle insert like the RoadsterSport Miata Duals, but we offer separate special optional baffle insert.
|,|"Shipping Cost" "add(+$89)"|-||-|||-||61-1934|,|MAZDA-MX-5-MIATA-EXHAUST-PARTS-AND-ACCESSORIES-2016|,|RoadsterSport SuperStreet TwinTip 2016-2020|,|61-1934|,|1,299.00|,|898.00|,||,||,||,||,||,||,|RoadsterSport SuperStreet TwinTip 2016-2020
This is a modified version of our all helmholtz Super Street muffler that adds small chamber dual tip muffler to add lots more user control, four different sound settings with the included MIXING BAFFLE, over TEN different sound level and tone variations if you mix in the optional packed baffles available on this site. Nonetheless, this is a VERY aggressive muffler by design with roots in our RACE muffler, with the included mixing baffle fully inserted left (Driver's) side to bypass the final chamber this muffler becomes precisely the same layout and sound as the RACE muffler. Progressively back out the included Mixing Baffle to lower the frequency balance of the result and overall DB level.
UPDATE May 2017, we now include a Mixing baffle that effectively converts this muffler to same sound as the Race muffler when fully inserted driver's side tip, adding back in the higher frequencies the chamber would otherwise convert lower (to cover the costs of adding that blocking baffle we are ending the RoadsterSport script on the tips and deleting the less effective pair of cone baffles). Result is more effective control over tone and the balance of treble vs bass than any other choice, max upper frequency fun is mixing baffle fully inserted driver's side tip, back it out to the other positions to progressively shift frequency balance lower.
Separately on the site is a fiber packed long baffle that effectively converts this unit to same frequency balance as the SuperStreet Single Tip. Thus, now essentially THREE mufflers in one here, the Race with included Mixing baffle, the SuperStreet Single tip if you add packed long baffle (item 60-1325SSTT), or skip the long baffles and use standard length baffles in one or both tips (item 60-1324T) to keep the bass heavy frequency balance but lower the volume. Result is a 17 pound street muffler with MORE flexibility than all other choices.
You get the great look of the RoadsterSport rolled and polished twin tips, the clean flow of the shortest possible path from the midpipe to the exhaust tips to max your horsepower gains, unprecedented level of user adjustment...and minimal weight with these features.
Driver's side tip pathway is essentially a straight through and adding Mixing Baffle to driver's side tip progressively cuts off the chamber and massively lowers the bass notes and raises the upper frequency response, etc.
SHIPPING NOTE...ships factory direct to you. All POLISHED stainless steel construction. Uses stock hangers and connects to either our RoadsterSport midpipe or the stock midpipe.
Just one bolt under each tip to make the baffle easy change.
Proudly made in the USA...with a LIFETIME WARRANTY, emissions legal in all 50 states!
NOTE we have report this does NOT clear our harddog hidden hitch or Velox rear diffusser!
BRIAN'S APPLICATION NOTES: Mild when cruising on otherwise stock ND, delivering a classic sports car BARK and THROATY RUMBLE when you wind it out to redline, lots of fun burble when just playing with the throttle around town. Easily UNDER our local SCCA sound limits on otherwise stock Miata (our SCCA limit here is 93 db at 50 feet and even in the rain our testing found it easily under our strictly enforced sound limits). Also easily under the most strict 92db days at Mazda Raceway Laguna Seca when used on otherwise stock ND. Result is TONS of fun, will make many of you laugh out loud. You also get the best performance from the straightest and cleanest flow out the exhaust cutout you can get, and much lower weight. Nonetheless, this choice is NOT for the faint of heart!!! The most common question we will get on this one is: "will it be too loud" and we cannot answer that one for you because the "right" sound level is a matter of entirely subjective personal preference.
Not designed for use on car with aftermarket header or aftermarket midpipe, designed for max fun on otherwise stock exhaust system. Adding header adds a massive amount of sound, thus we suggest customers considering adding a header should look to our SuperQ choices for best control of results with header change. The issue with using adjustable length midpipe with this ultra light three hanger design is that customers rarely get the adjustable length set correct and that can put too much stress on the connection between helmholtz chamber and straight pipe. So if you insist on adding midpipe with this design be careful to get length of midpipe accurate (hangers aligned nicely straight up and down for midpipe) and use thicker hanger from the rear to better support the bigger midpipe.
Proudly made in the USA...with a LIFETIME WARRANTY!
|,|"Shipping cost" "add(+$89)"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS-ROBBINS|,|SHOP-BY-TOP-MIATA-BRANDS|,|ROBBINS|,||,||,||,|ROBBINS MIATA SOFT TOPS|,||,||,||,||,||,||,|||-||ROAREBRCO|,|OWNERS-SHOWCASE|,|Robert A. Reimer
Victoria, British Columbia|,|newitem109929188|,||,||,||,||,||,||,||,||,|This is my 1990 Miata purchased last year with lots of miles. It is my E Stock "race car" autocrossed on weekends and driven daily.
I've installed a new top, Boss Frog rollbar, Koni yellow shocks and steel braided brake lines ..... and a cup holder.
Lots of fun, reasonably competitive, and very reliable. I'm looking for a matching purse.
Robert A. Reimer,
Victoria, British Columbia
|,|||-||ROWA|,|OWNERS-SHOWCASE|,|Robert Walton
Kansas|,|rowa|,||,||,||,||,||,||,|adsfaafg|,||,|I wanted a Miata for the last (5) years and thought someday I would get a used one. I found a business that has allowed me to get my Miata after 14 months of part time work. The Miata is a new 2003 Special Edition. The wheels I wanted come from Ireland. I live 40 miles north of Wichita, Kansas and today was the first day the temperature got into the 70's. The Miata and I went for a ride with the top down.
I am looking forward to more days like today...
Robert Walton
rwalton3@cox.net
|,|||-||ROCAKIT19|,|BLACKFRIDAYSALE|,|Roll Cage Kit 1990-1997|,|MC-RCK1|,|1,499.99|,|1,375.00|,||,||,|150.000 |,||,||,||,| Miata Roll Cage Kit 90-97
Features
* Lightweight weld in kit. Approximately 100lbs.
* Landing perches, 12 gussets and landing plates all included.
* Partially notched ? 11 of the tubes are pre notched.
* Computer controlled bending ensuring accurate bends every time.
*Comes complete with 29 page installation guide with over 55 pictures.
* Every piece is marked with a part # that corresponds to the installation guide and 3 seperate full page schematics within the guide.
* Front down tubes are located behind the dash.
* Main Hoop gets installed to perches on the floor that connect the rocker panel, floor and rear tub of the car not to the upper package tray.
* Rear down tubes land next to shock mounts.
* When installed properly less than ? inch of clearance to roof allowing for more head room for taller drivers.
* Includes Nascar door bars on both drivers and passenger sides installed at an angle that provide the driver with added safety in the event of a side impact.
* Allows for stock passenger seat to be reinstalled once complete.
* Includes concealed dash bar.
* After complete installation dash is still removable in one piece.
* Includes tubes and plates that connect front down tubes to the firewall.
* Additional tubes available ($30.00) to X brace rear down tubes.
* Nascar Bars available ($0.00 - Now included in kit) for Passenger side. SCCA ruled this is now legal effective 10/1/05. The additional weight of the Nascar Bars (as compared to straight bars) is roughly 3lbs and you can gut roughly 25lbs out of the door making this option a good weight reducer.
|,|"Freight Cost" "add(+$425)"|-||-|||-||RONLUENOK|,|OWNERS-SHOWCASE|,|Ron Lukenbaugh
Enid, Oklahoma|,|ronluenok|,||,||,||,||,||,||,|asdfasd|,||,|I bought this Miata MX-5 gold edition from a little old lady in Oklahoma City. 60k is all it has on it. Garaged most of its life. Now I have a new hobby ( driving ).
The modifications I have made is to the sound system. The factory cd/am/fm failed. Installed Alpine 9807 with new speakers. And of course I had to install an amp for the thumpers (in seat) so they could be powered also. The upgrades to the factory speakers included new headrest speakers and door speakers. They can hear me coming. Nothing better than the top down and some good music to drive to. The only problem is I have to work sometime.
Ron Lukenbaugh,
Enid, Oklahoma
|,|||-||CHWH|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|Rota & Chaparral Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||NAD-4363|,|CHWH|,|Rota RB 15x7 +35 Silver or Hyper Black SET Miata - Set of 4|,|NAD-4363|,|1,205.00|,|789.02|,||,||,||,||,||,||,|Rota RB 15x7 +35 Silver or Hyper Black SET Miata - Set of 4
The Rota RB's Vintage old school 8-Spoke style that truly befits the Miata's classic styling cues. Please be aware the RBs we sell are exclusively machined with 54.1 Miata center-bore just like the factory wheels so hub-centric rings are not necessary. All wheel are supplied with new valve stems and a set of heat treated lug nuts.
|,|"Select Color" "Select Here" "Hyper Black" "Silver"|-||-|"Shipping & Handling" "add(+$165)"|-||-|||-||SASPMISEBE|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|SafeCraft Spec Miata Seat Belts|,|MC-MSB|,|499.99|,|499.95|,||,||,|0.000 |,||,||,||,|SafeCraft Spec Miata Seat Belts
Hands down the best seat belt you can put in your Spec Miata. This belt was designed specifically to fit in the Miata and make it the most user friendly safest belt you can buy.
With most other belts, there are 2 adjusters on the belt. One that adjusts the length behind the seat where it connects to the car, and the other adjuster is the one that adjusts the belt around the driver.
These belts are a fixed length, so there is no adjustor for the length of the belt behind the seat. With some belts that 2nd adjustor ends up right up against the outside of the seat, and in a big impact the adjustor gets pinned up against the seat and allow the belt to loosen. The 2nd adjustor for adjusting the belt around the body is built into the tang that attaches to the camlock, so basically you always have the adjustors right in front of you as a driver and not down to the sides of your hips where it is hard to get leverage.
The lap belts are 2" wide, which in recent safety studies indicated it rode better on the hips than the traditional 3" ones. The shoulder harnesses come in either 3" for non Hans applications, or 2" upper portion, 3" lower portion for people using a Hans device.
Certified to SFI 16.5 spec, the belts are only good for 2 years, but SafeCraft will re-certify them the after the first 2 years for free.
There are loops sewn into each shoulder harness for attaching surgical tubing for those running enduros.
|,|||-||SALE|,|GALIWA|,|Sales|,||,||,||,||,||,||,||,||,||,||,|||-||SAMBRBEFL|,|OWNERS-SHOWCASE|,|Sam Bradford
Miami Beach, FL|,|sambrbefl|,||,||,||,||,||,||,|asfaf|,||,|I've lived abroad in the UK for nine years and have just returned to the USA
and will be moving to Miami Beach, Florida in the spring of 2004. Part of my
dream of living in SoFla has been to have a little roadster convertible to
zoom around in and enjoy the sunny benefits of living in Florida. There are
a lot of roadsters on the market now, but I picked the Miata because of it's
price and Consumer Reports rating. What really won me over to the Miata was
the color: black cherry mica -- a dark metallic purple. It almost looks
black until the sun is shining and reflecting the color at its true hue.
The car handles wonderfully and I'm very happy driving it and to be a Miata
owner. I just purchased it in February and will be adding some of the
Go Miata storage options to the car soon. The saddlebags will be the first
purchase! The Bose audio system has a built-in Sirius digital radio receiver
so I'm looking forward to adding the required tuner & antennae to get
digital radio without having to modify the car's dashboard at all.
Sam Bradford
Miami Beach, FL
|,|||-||386-245|,|MAZDA-MX-5-MIATA-BATTERY-2016|,|Schumacher On-Board Battery Charger |,|386-245|,|124.99|,|89.95|,||,||,||,||,||,||,|Schumacher On-Board Battery Charger
Attaches permanently to battery tray or fender well, mounting hardware included. The molded plastic sealed case is resistant to water, gasoline, oil, solvents and acids. The unit charges & maintains 12-volt batteries and is totally automatic, if the battery drops 1 volt, the charger switches on, when fully charged it switches itself off. Operates from any regular 110-volt outlet. Dimensions: 5 1/2" x 3 1/2" x 1 1/2".
|,|||-||SCLO|,||,|Scott Lomeriello|,|newitem2|,||,||,||,||,||,||,||,||,|Scott Lomeriello
|,|||-||SHOCTOWBRACM1|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Shock Tower Brace Mounting Bracket 1999-2000|,|156-511|,|85.00|,|64.00|,||,||,|0.000 |,||,||,||,|Custom Mounting Bracket for use with the High Flow Air Intake Assembly (Part No. 56502) on a 1999-00 Miata equipped with the factory shock tower brace.
(Bracket only - intake shown for display purposes)
This simple bracket allows the factory shock tower brace to be used with the Racing Beat High Flow Intake Assembly. Simply unbolt the stock mounting bracket and replace with this custom bracket before you install the High Flow Air Intake Assembly. This bracket is manufactured from heavy gauge steel and powder-coated with a durable black finish.
Each kit comes with mounting instructions. Installation time is approx. 10-15 minutes.
|,|||-||SHOCTOWBRACM|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Shock Tower Brace Mounting Bracket 2001-2005|,|156-512|,|85.00|,|64.00|,||,||,|0.000 |,||,||,||,|Custom Mounting Bracket for use with the High Flow Air Intake Assembly (Part No. 56502) on 2001-02 Miatas equipped with the factory shock tower brace.
(Bracket only - intake shown for display purposes)
This simple bracket allows the factory shock tower brace to be used with the Racing Beat High Flow Intake Assembly. Simply unbolt the stock mounting bracket and replace with this custom bracket before you install the High Flow Air Intake Assembly. This bracket is manufactured from heavy gauge steel and powder-coated with a durable black finish.
Each kit comes with mounting instructions.
|,|||-||SHOP-BY|,||,|SHOP BY|,||,||,||,||,||,||,||,||,||,||,|||-||61-0098|,|20MAMIEXVEAL|,|SHORT extension cord for primary/trim O2 Sensor - for use ONLY when installing RoadsterSport header 2006-2015|,|61-2919|,|109.00|,|54.00|,||,||,||,||,||,||,|SHORT extension cord for primary/trim O2 Sensor - for use ONLY when installing RoadsterSport header
2006-2015
This is a recommended option for the RoadsterSport Max Power Header. This is an extension cord for the FIRST O2 sensor which does provide fuel trim data to the factory ECU. With both O2 sensors out your NC will usually run default map which is overly rich. Better choice is this first extension cord which makes extending your first O2 sensor to our RoadsterSport midpipe's O2 bung easy PLUG AND PLAY. Yes....we also offer the LONGER extension cord for the second O2 sensor. Note that the plugs for each sensor are unique so that it is impossible to mix them. Extension cord uses thermal insulated wire and factory connectors and care should be take to make sure the connectors do not contact the hot header because while the wires are thermally protected the connectors can melt if left in contact with the header.
NOT CARB APPROVED, CANNOT SHIP TO RESIDENTS OF CALIFORNIA.
|,|||-||SIDEVIEW|,||,|Side View|,|sideview|,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-SIMPSON-DESIGN|,|SHOP-BY-TOP-MIATA-BRANDS|,|Simpson Design|,||,||,||,||,||,||,||,||,||,||,|||-||SDDSHTHSH|,|19MAMIDRCLFL|,|Simpson Design Mazda Miata 6 Speed Short Throw Shifter 1990-2000|,|407-105|,|244.99|,|195.02|,||,||,|0.000 |,||,||,||,|
Simpson Design Mazda Miata Short Throw Shifter 1990-2000
The classic Simpson Design short shifter replaces the factory shift lever on first and second generation Miatas with 5-speed gear or 6-speed boxes to provide a more positive feel and shorter throws.
A high quality part made from 316 stainless steel with a delron pivot ball, the Simpson short throw will not damage your transmission, unlike some other products on the market. The installation is very quick. You'll probably be able to do the work yourself or you can get it done inexpensively at your favorite shop.
Use it in with your factory knob or an aftermarket knob and experience a new joy in driving your Miata.
Fits 1990-2000 models only.
|,|"My current transmission is" "6-Speed"|-||-|||-||SDMIITASMA|,|SHOP-BY-TOP-MIATA-BRANDS-SIMPSON-DESIGN|,|Simpson Design Miata Italia Assembly Manual|,|525-302|,|50.00|,|24.95|,||,||,|0.000 |,||,||,||,|Simpson Design Miata Italia Assembly Manual Version 2.0
|,|||-||SDMIATITBODC|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Simpson Design Miata Italia Body Conversion Kit|,|525-301|,|15,999.95|,|12,400.00|,||,||,|300.000 |,||,|fgsdfg|,||,|If you have ever experienced the pulse-quickening excitement of standing near a Lotus, Alfa Romeo, Maserati, Cobra, Jaguar or Ferrari, then there’s no need to explain why the Italia was created. These incredible sports, racing and GT cars have been for years the ingredient of dreams -- affordable only to an affluent few. Designed by Jim Simpson of Simpson Design & Development, the Italia draws its inspiration from these wonderful cars.
Not a replica of any of them, the Italia captures the essence of their timeless styling with a re-styling package that compliments the Miata’s excellent quality and design.
The Italia is available as a kit shipped to your door. A call to GoMiata can help you determine if you want to have it professionally installed or do it yourself. The kit is made for a 90-97 Miata.
The Italia is a practical alternative to buying a new sports car from the ever-diminishing selection under $25,000. A conversion can be done for under $8,000 (including paint), depending on the owner’s technical skills.
This is a car for the owner who prefers to create a truly unique driving experience, who won’t settle for just an aero package, spoilers, bumper covers or a new paint job. You won’t find the Italia at your local speedshop or in the usual mail order catalog.
Remember the pleasure of driving your new Miata, the enjoyment of navigating a finely tuned sports car unlike anything else on the road? Let the Italia ignite the passion once again.
Simpson Design & Development & GoMiata take great pride and pleasure in creating each Italia to your specifications.
FOB Langley, Washington.
Please give us a call or email us to place order
|,|"Shipping" "Truck Lines add (+$600.00)"|-||-|"Shipping Crate" "Crate Charge add (+$350.00)"|-||-|"Shipping Express Trucking" "Home Delivery Charge add (+$200.00)"|-||-|||-||SK541-10-1200|,|NEW|,|Skunk2 Mazda Miata NC Pro-ST Coilovers 2006-2015|,|sk541-10-1200|,|1,349.99|,|1,050.95|,||,||,||,||,||,||,|Skunk2 Mazda Miata NC Pro-ST Coilovers 2006-2015
Skunk2 Pro-Series high performance coilovers are based on over a decade of racing and suspension tuning experience. The advanced technology used in numerous road racing and drag racing championships is now being applied to Skuns2's new line of Pro-Series coilover suspensions. Skunk2’s track and street tested valving offers the perfect balance for the daily drive or for spirited performance driving.
Pro-Series coilovers feature shortened shock bodies and shortened shaft strokes so suspension travel can be maintained on lowered vehicles for improved performance and comfort. With Skunk2 coilovers, enthusiasts can quickly and precisely set ride heights and corner weights to improve the vehicle’s handling response, cornering ability, stability, and balance.
Pro-Series Coilover suspension is offered in a nonadjustable dual-tube PRO-S design, or PRO-C adjustable mono-tube design. Skunk2 coilovers include hard anodized CNC-machined forged 6061-T6 spring perches and Skunk2 CNC-wound racing springs made from SAE9254V spring steel.
*Skunk2 PRO-C*
PRO-C full dampers offer the latest advanced shock technology featuring an adjustable race inspired mono-tube design for dramatically improved handling and cornering performance. The mono-tube design coupled with oversized shafts and pistons help make the PRO-C damper extremely responsive and durable. Each PRO-C kit features precise 12-way adjustable valving and come with CNC-machined
forged top mounts with spherical bearings or polyurethane bushings for maximum performance and feel; and have been tested extensively on the street and track. PRO-C dampers features shortened shock bodies and shafts to maintain proper suspension travel on lowered vehicles. Most PRO-C shock bodies are adjustable to allow additional height and preload adjustment and allow the driver to dial in all aspects of the vehicle balance and feel.
* Large Diameter Mono Tube Design
* 12-way Adjustable Precision Valving
* Shortened Shock Body and Stroke
* Adjustable Shock Length
* Adjustable Spring Preload
* Adjustable Ride Height
* SAE9254V Racing Springs
* Forged Upper Mounts
*Skunk2 PRO-S*
PRO-S dampers are the perfect basic high-performance full coilover suspension. PRO-S dampers are designed for drivers who are seeking an integrated coilover and shock set-up. PRO-S dampers feature pre-determined precision valving and carefully selected springs that are designed to dramatically improve handling performance by significantly increasing corner grip and reducing body roll, allowing the driver to feel greater control and stability at all speeds. Skunk2 springs are CNC-wound using the highest quality SAE9254V spring steel. Each spring is designed to optimize the balance between performance and comfort, and are custom matched to PRO-S dampers. PRO-S dampers provide an average drop from 1” to 3” for a sporty yet aggressive look. The PRO-S suspension offers dramatic improvements to handling while retaining an entry-level price.
* Dual Tube Design
* Non-Adjustable Precision Valving
* Shortened Shock Body and Stroke
* Adjustable Ride Height
* One-Piece Machined Bodies
* Uses Factory Upper Mount
* Some Kits include Forged Mounts
* SAE9254V Racing Springs
*Skunk2 PRO S II*
Skunk2’s completely redesigned, fully adjustable Pro-S II Coilovers have arrived. Similar to Skunk2’s industry-leading Pro-C Coilovers, Pro-S II Coilovers now feature double-adjustable ride height and a state-of-the-art mono-tube design. Thanks to threaded shock bodies, Pro-S II Coilovers now offer height adjustments independent of spring preload, which results in ride-height changes as low as three inches without sacrificing shock travel or ride comfort. Quick and precise ride-height adjustments can now be made for dialing in corner balancing as well as for improved handling, responsiveness, and overall balance. Skunk2’s track- and street-tested Pro-S II shock valving offers the perfect balance between daily driving and track performance and its all-new, shortened shock bodies and reduced shaft strokes help maintain adequate suspension travel on lowered vehicles for improved performance without sacrificing comfort.
Pro-S II Coilovers feature vehicle-specific valving dialed in by Skunk2’s suspension engineers, carefully selected springs designed to dramatically improve handling, and a race-inspired, mono-tube design for superior performance. Skunk2’s micro-polished, mono-tube design, combined with its precision-machined, oversized shafts and pistons, ensure that each Pro-S II Coilover is both responsive and durable. The results are unmatched cornering grip, reduced body roll, and a feel of vehicle control and stability like no other.
Like all Skunk2 Coilovers, its Pro-S II Coilovers feature hard-anodized, CNC-machined, forged 6061-T6 aluminum spring perches and CNC-wound racing springs manufactured from high-quality, SAE9254V spring steel. Each spring is designed to optimize the balance between comfort and performance and is custom-matched to their respective shocks. Pro-S II Coilovers offer ride-height adjustments as low as three inches for an aggressive and sporty appearance.
Just like the entire Pro Series lineup, Pro-S II Coilovers set the benchmark for suspension performance. Similar to how Skunk2’s Pro Series Camshafts and Valvetrain revolutionized Honda engine performance, its fully adjustable, Pro-S II Coilovers do just that for enthusiasts who are looking for high-performance suspension components at an affordable price. Based on more than 15 years of racing and suspension tuning experience, Pro-S II Coilovers feature the same technology Skunk2 uses on its own championship-winning road racing and drag racing cars.
Like all Skunk2 products, Pro-S II Coilovers feature a one-year warranty and are designed to provide years of enjoyment for the life of your vehicle. Never wait for a coilover rebuild again; Skunk2 stocks large quantities of replacement dampers that, in most cases, cost less than a typical coilover rebuild. Purchase your replacement dampers directly from Skunk2 to minimize downtime.
* Mono-Tube Construction
* Shortened Shock Body And Stroke
* Double-Adjustable Ride Height
* One-Piece, Forged Shock Body
* Factory-Set, Precision Valving
* Forged Upper Mounts (Some Applications)
* SAE9254V Racing Springs
* High-Quality Shock Oil
* Triple Upper And Lower Seals
* Oversized Pistons And Shafts
* Custom Spring Rates From 8-18kg/mm Available
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||SK541-10-1300|,|NEW|,|Skunk2 Pro-ST Coilovers 2016-2020|,|sk541-10-1300|,|1,449.00|,|1,319.00|,||,||,||,||,||,||,|Skunk2 Pro-ST Coilovers 2016-2020
Skunk2 Racing’s Pro-ST Coilovers are engineered as the best single adjustable suspension system on the market at a price point you can afford!
Serious club racers and discerning high performance street car owners agree that the Pro-ST's 12 way dampening, mono-tube design, threaded shock bodies with independent height/ spring pre-load adjustment, and billet radial bearing upper camber mounts give them all the control they need at the track without sacrificing ride quality on the street.
*FEATURES:*
* Mono-Tube Design
* 12-Way Adjustable Dampening
* One-Piece Forged Shock Body
* Micro-Polished Oversized Piston Shaft
* Independent Pre-Load/ Ride-Height Adjustments
* Reduced Shaft Stroke for Full Suspension Travel on Lowered Vehicles
* Billet Aluminum Spring Perches
* CNC Wound SAE9254V Racing Springs
|,|"Shipping & Handling" "add(+$95)"|-||-|||-||SLICKAUTO|,|SHOP-BY-TOP-MIATA-BRANDS|,|Slick Auto|,||,||,||,||,||,||,||,||,||,||,|||-||SM5-T4-MAZDA-MX-5-MIATA-CAGE-ROLL-CAGE-KIT---2006-2015|,|BLACKFRIDAYSALE|,|SM5/T4 Mazda MX-5 Miata Cage Roll Cage 2006-2015 - Sale! |,|2006-2015-SM5-roll-cage|,|2,500.00|,|1,900.00|,||,||,||,||,||,||,|SM5/T4 Mazda MX-5 Miata Cage Roll Cage 2006-2015
Go Miata is now offering a roll cage kit for the 2006 to 2015 Mazda MX5 Miata. Designed just like our 1990-2005 kits it offers the most room possible in the car while protecting the occupants.
This kit however if FULLY coped and ready for install. Minimal fitting required and comes with 2 templates that bolt to the car for proper placement of the main hoop. Once the main hoop is placed properly then all other tubes will fit into their proper position.
Since all tubes are fully coped the installation time is 10 to 12 hours less than having to notch all tubes and can easily be completed in 2 days by a skilled welder.
Features:
* Lightweight weld in kit.
* Laser cut and formed landing plates (10). Weld into place with no modifications.
* 1” tube gussets and landing plates all included.
* Main Hoop locator bracket - This is a bolt in bracket to align the main hoop in the car for the proper position since all other tubes key off of the main hoop.
* Fully notched kit. All tubes are fully notched/coped and ready for installation.
* Having the kit fully notched reduces the installation time by over 10 hours.
* Computer controlled bending ensuring accurate bends every time.
* Every piece is marked with a part # that corresponds to 4 separate full page schematics.
* Rear down tubes land next to shock mounts.
* When installed properly less than 1/4 inch of clearance to roof allowing for more head room for taller drivers.
* Includes Nascar door bars on both drivers and passenger sides installed at an angle that provide the driver with added safety in the event of a side impact.
* Allows for stock passenger seat to be reinstalled once complete.
* Kill Switch Plate for passenger side main hoop area.
MX5 Cup Kit also available.
|,|"Freight Cost" "add(+$499)"|-||-|||-||SMBLPLWICHMI|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Small Black Plate With Chrome Miata MX-5 Logo|,|MIA-N-CBN|,|45.99|,|37.95|,||,||,|0.000 |,||,||,||,|Raised Miata MX-5 Chrome logo mounted on a black powder-coated metal plate. Each plate includes vehicle specific hardware, theft deterrent snap caps and is backed by a lifetime warranty against flaws in materials and/or workmanship.
|,|||-||ORCADEKIT|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Soft Microfiber Car Duster Detail Kit|,|818-503|,|49.95|,|29.99|,||,||,|0.000 |,||,||,||,|Soft Microfiber Car Duster Detail Kit
Package includes:
One telescoping mircrofiber car duster
One small easy to carry car duster
One air vent brush
Features of Car Duster:
Brush Material:
Premium Microfiber Duster
Dense, fluffy duster for easy dust collection
Duster without metal
Handle Material:
High-grade PP plastic
EVA anti-slip handle
Ergonomic, Strong and tough
Premium Stainless Steel Telescoping Handle
Free extension length:
The minimum length is 27.95 inches and the maximum length is up to 33 inches. In this range, feel free to adjust to the length you want to meet your car cleaning needs
Easy Storage and Cleaning: Both dusters are equipped with handy storage cases.
|,|||-||SOFT-TOP-NA|,||,|Soft Top NA|,||,||,||,||,||,||,||,||,||,||,|||-||SOFT-TOP-NB|,||,|Soft Top NB|,||,||,||,||,||,||,||,||,||,||,|||-||SOFT-TOP-NC|,||,|Soft top NC|,||,||,||,||,||,||,||,||,||,||,|||-||SOFT-TOP-ND|,||,|Soft Top ND|,||,||,||,||,||,||,||,||,||,||,|||-||321200-755|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Sonax Upholstery and Carpet Cleaner - 16.9 fl. oz.|,|321200-755|,|15.99|,|10.99|,||,||,||,||,||,||,|Sonax Upholstery and Carpet Cleaner - 16.9 fl. oz.
Effectively cleans & removes stubborn dirt from fabrics, upholstery, door panels, carpets and ceilings. Foaming-action formula is rich in cleaning agents (surfactants) that bond to foreign contaminants deep within the fibers. Traps & eliminates odors with a clean, fresh scent
|,|||-||PODIO|,|SPARCOWHEELS|,|Sparco PODIO|,|PODIO|,|229.99|,|209.95|,||,||,||,||,||,||,|Sparco PODIO
Bolt Pattern: 5-112
The following wheel-specific hardware will be included with your order at no additional charge.
(20) Required lugbolt for vehicle
(4) Required centering ring
|,|"Select Color" "Select Here" "Gross Black" "Bronze" "Light Grey"|-||-|"Select Size" "Select Here" "18x8 48mm Offset"|-||-|"Center Cap - Set of 4" "No" "Yes add(+$29)"|-||-|"Shipping & Handling" "add(+$39)"|-||-|||-||PRO-CORSA|,||,|Sparco PRO CORSA|,|pro-corsa|,|189.99|,|167.95|,||,||,||,||,||,||,|Sparco PRO CORSA
Bolt Pattern:5-112
The following wheel-specific hardware will be included with your order at no additional charge.
(20) Required lugbolt for vehicle
(4) Required centering ring
|,|"Select Color" "Light Grey" "Matte Dark Titanium"|-||-|"Select Size" "17x7.5, 48mm Offset" "18x8, 48mm Offset add(+$28)"|-||-|"Center Cap - Set of 4" "No" "Yes add(+$24)"|-||-|"Shipping & Handling" "add (+$29.99)"|-||-|||-||SPARCOWHEELS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|Sparco Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||SPWHDRBL17|,|SPARCOWHEELS|,|Sparco Wheels ASSETTO GARA - Black Painted 17x7|,|TR-ASSETTOGARA|,|185.99|,|165.95|,||,||,|5.000 |,||,||,||,|Sparco Wheels ASSETTO GARA - Black Painted 17x7
Front and Rear
* Size: 17x7
* Offset: 45mm
* Backspacing: 5.71"
* Bolt Pattern: 5-114
* Rec. Tire Size: 215/55-17
* Weight: 17.5 lbs.
* Finish: Black Painted
* Construction: 1pc. Gravity Cast
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$35)"|-||-|||-||SPWHRALIGR15|,|SPARCOWHEELS|,|Sparco Wheels TERRA Light Grey Painted 15x7|,|TR-TERRA157|,|184.99|,|149.95|,||,||,|5.000 |,||,||,||,|Sparco Wheels TERRA Light Grey Painted 15x7
Front and Rear
* Size: 15x7
* Offset: 35mm
* Backspacing: 5.29"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/60-15
* Weight: 17.05 lbs
* Finish: Light Light Grey Painted
* Construction: 1pc. Gravity Cast
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$35)"|-||-|||-||HARDTOPMOUNTS|,|MAZDA-MX-5-MIATA-HARDTOP-CONVERTIBLE-TOP-PARTS-1999-2005|,|Spec Miata Black Hard Top Mounts|,|MC-MOUNTS|,|109.99|,|94.45|,||,||,|0.000 |,||,||,||,|Spec Miata Black Hard Top Mounts
These hard top mounts are made out of .125 Aluminum and are pre-bent to fit the exitsting mounting holes in the hard top and body of the car. Mount Kits consist of 2 front and 2 rear.
Comes in black color only.
(Sorry red color is no longer available)
|,|"Color" "Black"|-||-|||-||SPMIBO|,|SHOP-BY-SPEC-MIATA-PARTS|,|Spec Miata Body & Structure|,||,||,||,||,||,||,||,||,||,||,|||-||SPMIBR|,|SHOP-BY-SPEC-MIATA-PARTS|,|Spec Miata Brakes|,||,||,||,||,||,||,||,||,||,||,|||-||WINDOW-NET-MOUNTING-TUBE|,|19MAMIROBASA2|,|Spec Miata Center Window Net Mounting Tubes|,|MC-CENTER-WINDOW-NET-MOUNT|,|82.50|,|75.00|,||,||,|0.000 |,||,||,||,|Spec Miata Center Window Net Mounting Tubes
Laser cut and coped 1" tubes for securely mounting your center net.
Mounting your center net in the Miata can prove to be a little bit challenging and costly, so we have designed 2 options for mounting your center net. We now offer 2 different versions of a laser cut and coped 1" tube that welds to the stock (not the roll cage) steel dash bar. By installing one of these tubes to the stock dash bar it allows for the entire dash to still be removed and is plenty strong enough for the forces a center net could see.
A lot of cars we see have the center nets mounted way too low in the car. The intent of the center net is to keep the drivers head from moving to far towards the center of the car. You should default to the center net installation instructions for your specific center net but we like to see the center line of the net equal to the center line of the drivers helmet. Most install their nets lower than this due to the simplicity of running the net through one of the open gauge holes.
We offer 2 different tubes to fit your specific need.
Option 1 - Is a vertical tube which installs by drilling a 1" hole in the dash and sliding the vertical tube down through the dash to where it meets the stock steel dash bar. This tube comes coped for the 1.5" stock dash tube on one end and then has a threaded bung welded in the other end. We supply a 3/8" stud and nylock that you could then either use a bolt in style bracket on the end of the center net, or you could slip a female rod end over the stud and then thread in an eye bolt into the female rod end which would give you a place to hook the d-ring style clasp found on most center nets. I like this vertical tube setup the best simply because it keeps the angle of the center net in the proper place for the taller drivers.
Option 2 - Is a horizontal tube that goes through the hole where the hazard light switch on a 99-05 is located and indexes on a stock bracket that attaches the dash skin to the stock dash tube. Our Horizontal Center Net Mounting Tube is laser coped to index onto the bracket and then onto the stock dash bar. This horizontal option comes with a 1.5" threaded bung and eye bolt to connect your center net. The weld in bung for the 1" tube was machined to fit into the recessed hole left once the stock hazard switch has been removed. This is an extremely nice and clean installation as long as it is not to low for you or your driver.
The best time to install either one of these tubes is when the dash is out of the car during the build process. In this situation it is very easy to weld the tubes from the back side of the dash. If the dash is in the car you can still weld either tube by going through the radio hole and/or front vent holes.
The Vertical Tube comes with the following: Laser coped tube, welded in threaded bung, 3/8" stud and Nylock nut.
The Horizontal Tube comes with the following: Laser coped tube, threaded bung and eye bolt.
|,|"Select Style" "Select Here" "Horizontal Tube" "Vertical Tube"|-||-|||-||SPMICH|,|SHOP-BY-SPEC-MIATA-PARTS|,|Spec Miata Chassis|,||,||,||,||,||,||,||,||,||,||,|||-||SPMICOSY|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-1999-2005|,|Spec Miata Cooling System|,||,||,||,|Spec Miata Cooling System
A. Any radiator may be used, provided it is mounted in the original location, maintains the same plane as the original core and requires no body or structure modifications to install. Any openings created by fitting an alternate radiator shall be blocked to prevent air from entering the engine compartment. The stock cooling fan(s) must be maintained. At least one functional stock OEM cooling fan must be mounted in one of the stock locations.
B. Thermostats may be modified, removed, or replaced.
C. All cars may install the Upper Radiator Seal, p/n NA75-50OK7A
D. A radiator screen of one-fourth (1/4) inch minimum mesh may be added in front of the radiator and contained within the bodywork.
E. The factory air conditioning systems may be removed. Items that serve a dual purpose, such as the alternator/air conditioning compressor bracket, may not be substituted.
F. Engine coolant fluid, coolant/heater hoses and clamps may be substituted. Heater core may be bypassed. It may not be modified or removed. Heater water control valve(s) may be added or substituted. |,||,||,||,||,||,||,|||-||SPMICOSYIN|,|SPMICOSY|,|Spec Miata Cooling System Information|,||,||,||,||,||,||,||,||,||,|Spec Miata Cooling System
A. Any radiator may be used, provided it is mounted in the original location, maintains the same plane as the original core and requires no body or structure modifications to install. Any openings created by fitting an alternate radiator shall be blocked to prevent air from entering the engine compartment. The stock cooling fan(s) must be maintained. At least one functional stock OEM cooling fan must be mounted in one of the stock locations.
B. Thermostats may be modified, removed, or replaced.
C. All cars may install the Upper Radiator Seal, p/n NA75-50OK7A
D. A radiator screen of one-fourth (1/4) inch minimum mesh may be added in front of the radiator and contained within the bodywork.
E. The factory air conditioning systems may be removed. Items that serve a dual purpose, such as the alternator/air conditioning compressor bracket, may not be substituted.
F. Engine coolant fluid, coolant/heater hoses and clamps may be substituted. Heater core may be bypassed. It may not be modified or removed. Heater water control valve(s) may be added or substituted.
|,|||-||MAZDA-MIATA-DOOR-PULL|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Spec Miata Door Pulls 1990-2000|,|MC-DOOR-PULLS|,|138.00|,|125.00|,||,||,|0.000 |,||,||,||,|Spec Miata Door Pulls 1990-2000
Fire Proof Door Pulls for your 1990-2000 Miata.
We have designed an adjustable fire proof door pull for your SpecMiata. These door pulls install from the door release mechanism at the back of the door and go up to the front of the door so that they span the entire length of the door.
The purpose of this is so that the driver can simply swipe for door pull instead of tying to locate a specific door handle in the car. When trying to get out in a hurry when the car is upside down or on fire or in an emergency we have found that panic can set in and then the driver can’t quickly locate the release mechanism to open the door and potentially puts them at risk especially in the event of fire in the cockpit. By running the door pull from the front to the back, the driver simply has to swipe at it with either hand and they will quickly locate it and open the door.
These Kevlar pulls are lightweight, adjustable and visibly easy to locate. They are 1” wide with a bright Red cover sewn to the outside of the Kevlar. They will not burn and look much nicer than cable or wire inside the car. They are adjustable and will work with any cage and any type of door bars.
If you have on 01+ car the release mechanism is completely different and will not work without replacing the mechanisms with 99/00 ones. Most people just replace the 01+ mechanisms with the 99/00, as they bolt right into place and allow for the lighter horizontal release mechanism. You can add a set of 99/00 mechanisms from the drop down list below.
Some History......
We have an extrication exercises car that is on a rotisserie and is powered by an electric motor. This car allows us to put drivers in the car and simulate roll overs as well as other emergency situations. We use it to develop products that will help the drivers as much as possible in an impact as well as then extricate themselves as quickly as possible. Through the use of this car we found that most drivers could not extricate themselves from the car in less time than their race suits fire protection would keep them safe. From there we decided we need to improve on some things and the door pulls was one of the biggest things that slowed the driver down and put them in danger.
|,|"Additions to the package" "None" "99/00 Door Actuators add(+$75)"|-||-|||-||SPMIDRCOTR|,|SHOP-BY-SPEC-MIATA-PARTS|,|Spec Miata Driver/Passenger Compartment - Trunk|,||,||,||,||,||,||,||,||,||,||,|||-||SPMIENMO|,|SHOP-BY-SPEC-MIATA-PARTS|,|Spec Miata Engine Modifications|,||,||,||,||,||,||,||,||,||,||,|||-||SPMIENMOIN|,|SPMIENMO|,|Spec Miata Engine Modifications Information|,||,||,||,||,||,||,||,||,||,|A. Induction System
1. All air entering the intake tract shall pass through the fuel injection air inlet.
2. 1.6L cars may replace the stock air box with a cone style air filter assembly. The air filter element is unrestricted. No ducting or baffling of air to the air filter is permitted.
3. 1.6L cars may open and adjust, but not modify, the OEM airflow meter. For 1.6L cars, the position of the air flow meter may be moved provided it remains attached to the unmodified factory intake tube.
4. 1.8L cars must use the stock air box, but the air filter element is unrestricted.
5. 1.8L cars shall use an air restrictor. The throttle restrictor shall be placed between the throttle body and plenum. All intake air shall pass through the restrictor plate.
Restrictor plates must be the proper size as listed in the Specification Table, must be from Mazdaspeed Motorsports Development, and must not be modified.
B. Fluid hoses and clamps, oil filters, fuel filters, and belts (fan, alternator, etc.) may be substituted with others of equivalent OEM specifications.
C. Fuel System
1. Unleaded fuel filler trap door and restrictor plate in filler neck may be removed.
2. Refer to GCR Section 9.3.25 for permitted fuel specifications and for the required fuel sample acquisition port.
d. Ignition/Electrical System
1. Spark plugs and spark plug wires may be substituted.
2. Ignition timing is unrestricted within stock adjustment capability.
3. Batteries may be replaced with those of an alternate manufacturer, provided they are of similar amp-hour capacity, size, and weight and are fitted in the standard location.
Additional battery hold-down devices may be used, and are strongly recommended.
E. Exhaust System
1. The factory exhaust system beyond the OEM front down pipe may be replaced, provided:
a. Said replacement system retains the original configuration, e.g. single tube design, and the tubing diameter is a maximum of 2.25” outside diameter.
b. The pipe may end anywhere after the rear subframe. Forward of the rear subframe, the pipe must follow the original path of the OEM exhaust system.
c. No expansion chambers. A single muffler may be added.
d. The system meets all event specific sound requirements.
e. A cat replacement tube may be installed. The tube shall not exceed 17.5” in length and have an outside diameter no greater than 2.375”.
2. Original exhaust system heat shields may be removed.
F. Clutch System and Flywheel: All cars shall use either the stock OEM pressure plate appropriate model year or the ACT pressure plate (Mazdaspeed p/n: 0000-0205401-SS (1.6L cars) or 0000-0205404-AC (1.8L cars)). The unmodified pressure plate shall be bolted directly to the appropriate stock, unmodified flywheel. The 94 model year may utilize the flywheel from the 95-05 model years. Any clutch disk may be used. The minimum weight (including the pilot bearing) is 17.6 lbs for the 1.6L and 17.1 lbs for the 1.8L.
G. Lubricants may be substituted with any lubricant. Oil additives are unrestricted.
H. The engine block and/or cylinder head may be decked/milled to achieve the factory specified compression ratio for the correct model year as listed on the specification table.
I. Camshafts shall comply with the Official Camshaft Data as supplied by the SCCA Club Racing Tech Department.
J. Cast iron cylinder liners (sleeves) may be installed to restore damaged or worn cylinder bores to the original dimension.
|,|||-||SHOP-BY-SPEC-MIATA-PARTS|,|DONTMISS|,|SPEC MIATA PARTS|,||,||,||,|MAZDA MX-5 MIATA "SPEC MIATA" PARTS AND ACCESSORIES|,||,||,||,||,||,|The following items represent the only modifications and safety items permitted and/or required on Spec Miata automobiles other than safety items as required in Section 9. No permitted component/modification shall additionally perform a prohibited function. No updating or backdating of cars, models, specifications, and/or components thereof shall be permitted except as specifically authorized in these specifications.
A Shop Manual for the specific make, model, and year of automobile is required to be in the possession of each entrant. The manual is intended to aid Scrutineers in identifying parts and the configuration of the automobile. Overhaul procedures that in the slightest way would increase performance are not to be utilized; e.g., porting, etc. Blueprinting and balancing are inconsistent with the philosophy of this class and are not permitted.
All adjustments shall be at the manufacturer’s specification and/or within the manufacturer’s specified tolerances except as permitted within the SMCS.
Stock replacement parts may be obtained from sources other than the manufacturer provided they are the exact equivalent of the original parts. The intent of this rule is to allow the competitor to obtain replacement parts from standard industry outlets, e.g., auto-parts distributors, rather than from the manufacturer. It is not intended to allow parts that do not meet all dimensional and material specifications of new parts from the manufacturer.
The application and/or use of any painting, coating, plating, or impregnating substance (i.e. anti-friction, thermal barrier, oil shedding coatings, chrome, anodizing, etc.) to any internal engine surface, transmission, differential, internal or external surfaces of the exhaust manifold or down-tube, is prohibited.
|,|||-||SPMISA|,|MAZDA-MX-5-MIATA-ROLL-BARS-AND-SAFETY-PARTS-AND-ACCESSORIES-2016|,|Spec Miata Safety|,||,||,||,||,||,||,||,||,||,||,|||-||MIATA-SPLINED-BOLT-ON-QUICK-DISCONNECT|,|MAZDA-MX-5-MIATA-DRIVETRAIN-PARTS-AND-ACCESSORIES-1999-2005|,|Spec Miata Splined Bolt On Quick Disconnect 1990-2005|,|MC-SPLINED-BOLTON-QUICK|,|165.00|,|140.00|,||,||,|0.000 |,||,||,||,|Spec Miata Splined Bolt On Quick Disconnect 1990-2005
This is the bolt on version of our best selling splined quick disconnect that works with our bolt on Steering Shaft Adaptor. This splined disc connect has 3 index points making it extremely precise without any slop in the system. This quick disconnect can be operated with one hand and is lighter than most QD's on the market.
This version requires the bolt on version of our Steering Shaft Adaptor and is the most economical bolt on version of a quick disconnect that we sell.
|,|"Additions to the package" "None" "Steering Shaft Adapter - Bolt On Style add(+$150)"|-||-|||-||MAZDA-MIATA-STEERING-SHAFT-ADAPTER|,|SPMIDRCOTR|,|Spec Miata Steering Shaft Adapter 1990-2005|,|MC-STEERING-SHAFT-ADAPTER|,|165.00|,|150.00|,||,||,|0.000 |,||,||,||,|Spec Miata Steering Shaft Adapter 1990-2005
Finally a high quality steering shaft adaptor that utilizes the stock Mazda steering shaft splines and stock nut.
Once you remove your stock steering wheel, simply slide the steering shaft adaptor over the steering shaft and the put the stock nut back on and you are done. The MiataCage steering shaft adaptor has female splines on the inside that index the male splines from the stock steering shaft and uses the stock taper on the steering shaft so it works just like the Mazda factory steering wheel setup.
This setup is completely modular, so from there you can add steering spacers in 1/2” increments to put the steering wheel exactly where you want it. The steering shaft adaptor is infinitely adjustable since there are so many splines on the stock shaft. The adaptor is made from steel which is exactly the way the factory engineered it. If you look at the stock steering wheels from 90-05 you will see that Mazda made the portion that indexes the splines out of steel. There are some other products on the market that are cast aluminum chinese parts. We feel that Mazda engineered it to be steel on steel so that is the way we made it. Given the mechanical grip and abuse these cars go through in a race environment we feel is the only safe way to go.
This is a 2 piece solution that comes with our 3 bolt to 6 bolt Steering Wheel Adaptor to connect your Momo/Sparco/OMP steering wheel. From there you can directly connect a Momo/Sparco/OMP steering wheel or bolt on various styles of quick disconnects available on the market.
|,|"Options" "None" "1/2in Steering Shaft Spacer add(+$25)"|-||-|||-||SPMITRDR|,|SHOP-BY-SPEC-MIATA-PARTS|,|Spec Miata Transmission/Final Drive|,||,||,||,|Spec Miata Transmission/Final Drive
a. Transmission and final drive ratios must remain stock for the year of car. 1999-up cars shall only use the 5 speed transmission and the 4.3 differential ratio. All cars may use the stock br /> unmodified OEM open differential or one of the approved alternates listed below.
b. 1990 to 1993 Miatas may use the stock, unmodified viscous limited slip differential or the MAZDASPEED Motorsports Development limited slip differential, part number #QN10-64A00 (previously TOY1-27-200 & 0000-02- 5501).
c. 1994 and newer cars may use the stock Torsen limited slip differential.
d. The 90-93 Miatas may convert to the 99-05 differential housing and the 4.3 differential gear ratio from the 99-05 model years. This conversion includes the driveshaft and half-shafts. The original 90-93 model rear suspension uprights must be retained.|,||,||,||,||,||,||,|||-||SPMIWH|,|SHOP-BY-SPEC-MIATA-PARTS|,|Spec Miata Wheels and Tires|,||,||,||,||,||,||,||,||,||,||,|||-||WINETINKIT|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Spec Miata Window Net installation kit|,|MC-WNIK|,|79.99|,|59.00|,||,||,|0.000 |,||,||,||,| Spec Miata Window Net Installation Kit
Window Net installation kit. – Spring loaded (front to rear) installation kit drops down from the top. This kit DOES NOT have the annoying GM buckle set up that you have to crawl over when entering and exiting the car.
If you look closely in the picture below, you can see the mounting tabs are tucked up out of the way of the driver getting in and out of the vehicle.
This kit adheres to the recent SCCA GCR update on mounting of window nets.
|,|||-||SPECDTUNING|,|SHOP-BY-TOP-MIATA-BRANDS|,|SPEC-D TUNING|,||,||,||,||,||,||,||,||,||,||,|||-||PUPESHKNWI12|,|SPDARABUSE|,|SPEED DAWG RACING Dark Blue Shift Knob with 12 Volt Button Switch|,|SK508-ST-12|,|75.90|,|65.90|,||,||,|0.000 |,||,||,||,|SPEED DAWG RACING Dark Blue Shift Knob with 12 Volt Button Switch
BURNOUT SERIES. Premium 2-1/8" Diameter Purple Pearl Shift Knob with subsurface Speed Dawg logo and heavy duty 12 Volt Momentary Switch for Line Lock, Trans Brake or Nitrous applications. Manufactured from a high-impact polymer resin that is custom formulated for shift knobs. Each is equipped with 20 inches of 18 gauge wire and a 16mm brass master thread that is inserted to meet auto manufacturing specifications of 200 ft. lbs. pull and 20 ft. lbs. torque. Price includes an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHSHKNWLOAND|,|SPDARABUSE|,|SPEED DAWG RACING White Shift Knob w/ Line Lock and 12 Volt Button Switch|,|SK502SD-BK-12|,|75.90|,|65.90|,||,||,|0.000 |,||,||,||,|SPEED DAWG RACING White Shift Knob w/ Line Lock and 12 Volt Button Switch
BURNOUT SERIES. Premium 2-1/4" Diameter White Shift Knob with subsurface Speed Dawg logo and heavy duty 12 Volt Momentary Switch for Line Lock, Trans Brake or Nitrous applications. Manufactured from a high-impact polymer resin that is custom formulated for shift knobs. Each is equipped with 20 inches of 18 gauge wire and a 16mm brass master thread that is inserted to meet auto manufacturing specifications of 200 ft. lbs. pull and 20 ft. lbs. torque. Price includes an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SK508NL-RW|,|20MAMIINKN|,|SPEED DAWGŽ RACING DARK BLUE / WHITE RALLY STRIPE SHIFT KNOB|,|SK508NL-RW|,|74.95|,|64.95|,||,||,||,||,||,||,|SPEED DAWGŽ RACING DARK BLUE / WHITE RALLY STRIPE SHIFT
RALLY SERIES. Premium quality 2-1/8" diameter Dark Blue Shift Knob with White Rally Stripes and your choice of shift pattern. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.50 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Weight is 5 ounces. Made in the USA.
A FREE Speed Dawg Shift Knobs decal is included with every order!
Contact us if you need a shift pattern that is not listed in the pull-down menu. This knob may be ordered with side logo text. Custom lettering is also available. Factory Mustang shifters may require a Boot Retainer to complete the installation. Corvette thread sizes (9/16-18 & C6) may require up to 4 weeks for production and delivery If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty. California residents click here for Proposition 65 WARNING label. Made in the USA.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|"12 Volt Momentary Switch option" "-Select 12 Volt Momentary Switch Option-" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch - add(+$13.95)"|-||-|||-||SPEEDDAWG|,|SHOP-BY-TOP-MIATA-BRANDS|,|SPEED DAWG® RACING|,||,||,||,||,||,||,||,||,||,||,|||-||13BASHKN|,|SPDARATRSE|,|SPEED DAWG® RACING 13 Ball Shift Knob|,|SK013-TS|,|45.95|,|35.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING 13 Ball Shift Knob
TRADITIONAL SERIES. Authentic 13 Ball Orange Stripe pool ball tapped for shifter use. 2-1/4" diameter. A free adapter kit is included. Made in the USA.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLAQSPSHKNWL|,|SPDARAHOTROD|,|SPEED DAWG® RACING Black / Aqua Splash Shift Knob w/ logo|,|SK532-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Aqua Splash Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Black / Aqua Splash Shift Knob. Comprised of specially formulated high-impact polymer resin created specifically for performance automotive applications. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLGRBLRASTSH|,|SPDARARASE1|,|SPEED DAWG® RACING Black / Grabber Blue Rally Stripe Shift Knob|,|SK501NL-RB|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Grabber Blue Rally Stripe Shift Knob
Limited Edition. Premium quality 2-1/8" diameter Black Shift Knob with Grabber Blue Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|"12 Volt Momentary Switch option" "Select 12 Volt Momentary Switch Option-" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch add(+$25.95)"|-||-|||-||BLORRASTSHKN|,|SPDARARASE1|,|SPEED DAWG® RACING Black / Grabber Orange Rally Stripe Shift Knob|,|SK501NL-RGO|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Grabber Orange Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Black Shift Knob with Orange Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Lower Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPEGRRASTSH|,|SPDARARASE1|,|SPEED DAWG® RACING Black / Pearl Gray Rally Stripe Shift Knob|,|SK501NL-RG|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Pearl Gray Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Black Shift Knob with Pearl Gray Rally Stripes and your choice of shift pattern. Look closely and you can see the detail of the pearl effect in the dual stripes. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPEGRRASTSH1|,|SPDARARASE1|,|SPEED DAWG® RACING Black / Pearl Gray Rally Stripe Shift Knob w/ Side Logos|,|SK501-RG|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Pearl Gray Rally Stripe Shift Knob w/ Side Logos
Premium quality 2-1/8" diameter Black Shift Knob with Pearl Gray Rally Stripes and your choice of shift pattern. Look closely and you can see the detail of the pearl effect in the dual stripes. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Speed Dawg logo text is engraved on each side. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESPSHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Black / Pearl Splash Shift Knob|,|SK531-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Pearl Splash Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Black Pearl Splash Shift Knob. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Please note that each Splash style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESPSHKNWL|,|SPDARAHOTROD|,|SPEED DAWG® RACING Black / Pearl Splash Shift Knob w/ logo|,|SK531-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Pearl Splash Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Black / Pearl Splash Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESPSHKNWI|,|SPDARABUSE|,|SPEED DAWG® RACING Black / Pearl Splash Shift Knob with 12 Volt Button Switch|,|SK531-HR-12|,|75.90|,|65.90|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Pearl Splash Shift Knob with 12 Volt Button Switch
BURNOUT SERIES. Premium 2-1/8" Diameter Black / Pearl Splash Shift Knob with subsurface Speed Dawg logo and heavy duty 12 Volt Momentary Switch for Line Lock, Trans Brake or Nitrous applications. Manufactured from a high-impact polymer resin that is custom formulated for shift knobs. Each is equipped with 20 inches of 18 gauge wire and a 16mm brass master thread that is inserted to meet auto manufacturing specifications of 200 ft. lbs. pull and 20 ft. lbs. torque. Price includes an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLREDRASTSHK|,|SPDARARASE1|,|SPEED DAWG® RACING Black / Red Rally Stripe Shift Knob|,|SK501NL-RR|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Red Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Black Shift Knob with Red Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLWHRASTSHKN2|,|SPDARARASE1|,|SPEED DAWG® RACING Black / White Rally Stripe Shift Knob|,|SK501NL-RW|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / White Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Black Shift Knob with White Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Lower Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLYERASTSHKN|,|SPDARARASE1|,|SPEED DAWG® RACING Black / Yellow Rally Stripe Shift Knob|,|SK501NL-RY|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black / Yellow Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Black Shift Knob with Yellow Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||BL4SPSHKN|,|SPDARARESE|,|SPEED DAWG® RACING Black 4 Speed Shift Knob|,|SK501-RE-4RUL|,|45.95|,|35.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black 4 Speed Shift Knob
Black 1-7/8" diameter shift knob with engraved White 4 Speed shift pattern. Excellent reproduction of the original shift knob from back in the day. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Includes your choice of adapter size and jam nut. Comes with a 30 day money back guarantee. Made in USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||COUNTRYSPEEDDAWGSHIFT1|,|INSETE|,|SPEED DAWG® RACING Black County Prison 5 Speed Shift Konb|,|SK501-CPW-5RDR|,|50.00|,|39.95|,||,||,|0.000 |,||,||,||,|TRADITIONAL SERIES. Black 2-1/8" diameter shift knob with engraved White 5 Speed Reverse Lower Right shift pattern. COUNTY PRISON text replaces the 4 and 5 speed numerals. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.50 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA. Please allow up to 4 weeks for production of out of stock items. If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLFLSHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Black Flame Shift Knob|,|SK511-ST|,|69.95|,|59.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Flame Shift Knob
STEALTH SERIES. Premium 2-1/8" Diameter Black Flame Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a free adapter kit. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLFLSHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Black Flame Shift Knob w/ logo|,|SK511-HR|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Flame Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Black Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLFLSHKNWI12|,|SPDARABUSE|,|SPEED DAWG® RACING Black Flame Shift Knob with 12 Volt Button Switch|,|SK511-HR-12|,|99.95|,|89.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Flame Shift Knob with 12 Volt Button Switch
BURNOUT SERIES. Premium 2-1/8" Diameter Black Flame Shift Knob with subsurface Speed Dawg logo and heavy duty 12 Volt Momentary Switch for Line Lock, Trans Brake or Nitrous applications. Manufactured from a high-impact polymer resin that is custom formulated for shift knobs. Each is equipped with 20 inches of 18 gauge wire and a 16mm brass master thread that is inserted to meet auto manufacturing specifications of 200 ft. lbs. pull and 20 ft. lbs. torque. Price includes an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Black Pearl Shift Knob|,|SK521-ST|,|54.95|,|44.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Pearl Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Black Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Black Pearl Shift Knob w/ logo|,|SK521-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Pearl Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Black Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESKSHKN|,|SPDARATRSE|,|SPEED DAWG® RACING Black Pearl Skull Shift Knob|,|SK521-TS|,|45.95|,|44.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Pearl Skull Shift Knob
TRADITIONAL SERIES. Premium 2-1/8" diameter Black Pearl Shift Knob with 3-D pewter skull embedded subsurface. Comprised of specially formulated high-impact polymer resin. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded adapter in the size of your choice. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPISHKN|,|SPDARAPISE|,|SPEED DAWG® RACING Black Pinstripe Shift Knob|,|SK501-PS|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Pinstripe Shift Knob
PINSTRIPE SERIES. Premium 2-1/4" Diameter Black Shift Knob with old school lettering and pinstripe design created by world famous pinstriper Von Hot Rod. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLSHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Black Shift Knob w/ logo|,|SK501-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/4" Diameter Black Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLSHKNWI12VO|,|SPDARABUSE|,|SPEED DAWG® RACING Black Shift Knob with 12 Volt Button Switch|,|SK501-HR-12|,|75.90|,|65.90|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Shift Knob with 12 Volt Button Switch
BURNOUT SERIES. Premium 2-1/4" Diameter Black Shift Knob with subsurface Speed Dawg logo and heavy duty 12 Volt Momentary Switch for Line Lock, Trans Brake or Nitrous applications. Manufactured from a high-impact polymer resin that is custom formulated for shift knobs. Each is equipped with 20 inches of 18 gauge wire and a 16mm brass master thread that is inserted to meet auto manufacturing specifications of 200 ft. lbs. pull and 20 ft. lbs. torque. Price includes an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Reducer Kit" "10mm x 1.25"|-||-|||-||BLSHKNWIENSH|,|SPDARACLSE|,|SPEED DAWG® RACING Black Shift Knob with Engraved Shift Pattern|,|SK501-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/4" diameter Black Shift Knob with Shift Pattern engraved on top. Select from 4, 5 or 6 speed patterns. Call us if you need a pattern that is not listed in the Select Shift Pattern box. Speed Dawg logo text is engraved on each side. Engraved text and linework color is Silver. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left" "5 Speed- Reverse lower right" "6 Speed-Reverse upper right" "Automatic"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLSHKNWIENSI|,|SPDARACLSE|,|SPEED DAWG® RACING Black Shift Knob with Engraved Side Logo|,|SK501-CL|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Shift Knob with Engraved Side Logo
CLASSIC SERIES. Premium 2-1/4" diameter Black Shift Knob with Speed Dawg logo text engraved on each side. Logo text color is Silver. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLGRRASTSHKN|,|SPDARARASE1|,|SPEED DAWG® RACING Blue / Gray Rally Stripe Shift Knob|,|SK508NL-RG|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Blue / Gray Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Blue Shift Knob with Gray Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLWHRASTSHKN1|,|SPDARARASE|,|SPEED DAWG® RACING Blue / White Racing Stripe Shift Knob|,|SK508NL-MW|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Blue / White Racing Stripe Shift Knob
Premium quality 2-1/8" diameter Blue Shift Knob with 3 White Racing Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "Select Shift Pattern" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|"12 Volt Momentary Switch option" "Select 12 Volt Momentary Switch Option" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch add(+$25.95)"|-||-|||-||BLPESHKN1|,|SPDARASTSE|,|SPEED DAWG® RACING Blue Pearl Shift Knob|,|SK522-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Blue Pearl Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Blue Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESHKNWLO1|,|SPDARAHOTROD|,|SPEED DAWG® RACING Blue Pearl Shift Knob w/ logo|,|SK522-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Blue Pearl Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Blue Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESHKNWI12|,|SPDARABUSE|,|SPEED DAWG® RACING Blue Pearl Shift Knob with 12 Volt Button Switch|,|SK522-HR-12|,|75.90|,|65.90|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Blue Pearl Shift Knob with 12 Volt Button Switch
BURNOUT SERIES. Premium 2-1/8" Diameter Blue Pearl Shift Knob with subsurface Speed Dawg logo and heavy duty 12 Volt Momentary Switch for Line Lock, Trans Brake or Nitrous applications. Manufactured from a high-impact polymer resin that is custom formulated for shift knobs. Each is equipped with 20 inches of 18 gauge wire and a 16mm brass master thread that is inserted to meet auto manufacturing specifications of 200 ft. lbs. pull and 20 ft. lbs. torque. Price includes an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||BLPESHKNWIEN|,|SPDARACLSE|,|SPEED DAWG® RACING Blue Pearl Shift Knob with Engraved Shift Pattern|,|SK522-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Blue Pearl Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/8" diameter Blue Pearl Shift Knob with Shift Pattern engraved on top. Select from 4, 5 or 6 speed patterns. Speed Dawg logo text is engraved on each side. Engraved text and linework color is Gold. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left" "5 Speed- Reverse lower right" "
6 Speed-Reverse upper right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARABUSE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING BURNOUT SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||SPDARACAFIWI|,|SPEEDDAWG|,|SPEED DAWG® RACING Carbon Fiber with Skull airbrushed shift knob|,|SK501AB-CFS|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Carbon Fiber with Skull airbrushed shift knob
AIRBRUSHED SERIES. Premium 2-1/8" diameter shift knob with Carbon Fiber & Skull design. Each Airbrushed Series shift knob is individually painted by professional airbrush artist Andy Stapp. Graphics are subsurface and will not wear off. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.5 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARACLSE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING CLASSIC SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||ENBLSHKNWI12|,|SPDARABUSE|,|SPEED DAWG® RACING Engraved Black Shift Knob with 12 Volt Button Switch|,|SK501-CL-12|,|75.90|,|65.90|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Engraved Black Shift Knob with 12 Volt Button Switch
Black 2-1/4" diameter Shift Knob with Engraved Silver Speed Dawg logo text and 12 Volt Momentary Switch for line lock, trans brake or nitrous applications. Made in USA. A FREE reducer kit is included with purchase.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPEED-DAWG-RACING-STEALTH-SERIES-GLITTER-INJECTED-TRANSPARENT-BLUE-SHIFT-KNOB|,|20MAMIINKN|,|SPEED DAWG® RACING Glitter Injected Transparent Blue Shift Knob|,|SK548-ST|,|64.95|,|59.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Glitter Injected Transparent Blue Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Glitter Injected Transparent Blue Shift Knob. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.5 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||GLITTER-INJECTED-TRANSPARENT-PURPLE-SHIFT-KNOB|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING Glitter Injected Transparent Purple Shift Knob|,|SK533-ST|,|64.95|,|59.95|,||,||,|0.000 |,||,||,||,|Glitter Injected Transparent Purple Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Glitter Injected Transparent Purple Shift Knob. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.5 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
Factory Mustang shifters may require a Boot Retainer to complete the installation. Corvette thread sizes (9/16-18 & C6) may require up to 4 weeks for production and delivery
If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty.
|,|"Adapter Kit" "10mm x 1.25 (Mazda Miata)"|-||-|"12 Volt Momentary Switch option" "Select 12 Volt Momentary Switch Option" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch add(+$13.95)"|-||-|||-||SK549-ST|,|NAKNOBS|,|SPEED DAWG® RACING Glitter-Injected Transparent Black Shift Knob|,|SK549-ST|,|64.95|,|59.95|,||,||,||,||,||,||,|Glitter Injected Transparent Black Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Glitter Injected Transparent Purple Shift Knob. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.5 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
Factory Mustang shifters may require a Boot Retainer to complete the installation. Corvette thread sizes (9/16-18 & C6) may require up to 4 weeks for production and delivery
If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty.
|,|"Adapter Kit" "10mm x 1.25 (Mazda Miata)"|-||-|"12 Volt Momentary Switch option" "Select 12 Volt Momentary Switch Option" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch add(+$13.95)"|-||-|||-||GLTRREDSHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Glitter-Injected Transparent Red Shift Knob|,|SK542-ST|,|64.95|,|59.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Glitter-Injected Transparent Red Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Glitter-Injected Transparent Red Shift Knob. Comprised of specially formulated high-impact polymer resin. Torque and temperature rated to performance level standards. A free adapter kit is included. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||GLTRREDSHKNW|,|SPDARAHOTROD|,|SPEED DAWG® RACING Glitter-Injected Transparent Red Shift Knob|,|SK542-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Glitter-Injected Transparent Red Shift Knob
HOT ROD SERIES. Premium 2-1/8" Diameter Glitter-Injected Transparent Red Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||GRBLBLRASTSH|,|SPDARARASE1|,|SPEED DAWG® RACING Grabber Blue / Black Rally Stripe Shift Knob|,|SK513NL-RB|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Grabber Blue / Black Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Grabber Blue Shift Knob with Black Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|"12 Volt Momentary Switch option" "-Select 12 Volt Momentary Switch Option-" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch - add(+$13.95)"|-||-|||-||GRPISHKN|,|SPDARAPISE|,|SPEED DAWG® RACING Gray Pinstripe Shift Knob|,|SK505-PS|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Gray Pinstripe Shift Knob
PINSTRIPE SERIES. Premium 2-1/4" Diameter Gray Shift Knob with old school lettering and pinstripe design created by world famous pinstriper Von Hot Rod. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||LIGRBLRASTSH|,|SPDARARASE1|,|SPEED DAWG® RACING Green / Black Rally Stripe Shift Knob|,|SK506NL-RB|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Green / Black Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Lime Green Shift Knob with Black Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||GRPESHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Green Pearl Shift Knob|,|SK523-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Green Pearl Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Green Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||GRPESHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Green Pearl Shift Knob w/ logo|,|SK523-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Green Pearl Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Green Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||GRPESHKNWIEN|,|SPDARACLSE|,|SPEED DAWG® RACING Green Pearl Shift Knob with Engraved Shift Pattern|,|SK523-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Green Pearl Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/8" diameter Green Pearl Shift Knob with Shift Pattern engraved on top. Select from 4, 5 or 6 speed patterns. Speed Dawg logo text is engraved on each side. Engraved text and linework color is White. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left" "5 Speed- Reverse lower right" "6 Speed-Reverse upper right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARAHOTROD|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING HOT ROD SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||IV4SPSHKN|,|SPDARARESE|,|SPEED DAWG® RACING Ivory 4 Speed Shift Knob|,|SK503-RE-4RUL|,|45.95|,|35.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Ivory 4 Speed Shift Knob
Ivory 1-7/8" diameter shift knob with engraved Black 4 Speed shift pattern. Excellent reproduction of the original shift knob from back in the day. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Includes your choice of adapter size and jam nut. Comes with a 30 day money back guarantee. Made in USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||IVFLSHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Ivory Flame Shift Knob|,|SK512-ST|,|69.95|,|59.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Ivory Flame Shift Knob
STEALTH SERIES. Premium 2-1/8" Diameter Ivory Flame Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a free adapter kit. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||IVFLSHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Ivory Flame Shift Knob w/ logo|,|SK512-HR|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Ivory Flame Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Ivory Flame Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||IVFLSHKNWI12|,|SPDARABUSE|,|SPEED DAWG® RACING Ivory Flame Shift Knob with 12 Volt Button Switch|,|SK512-HR-12|,|99.95|,|89.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Ivory Flame Shift Knob with 12 Volt Button Switch
BURNOUT SERIES. Premium 2-1/8" Diameter Ivory Flame Shift Knob with subsurface Speed Dawg logo and heavy duty 12 Volt Momentary Switch for Line Lock, Trans Brake or Nitrous applications. Manufactured from a high-impact polymer resin that is custom formulated for shift knobs. Each is equipped with 20 inches of 18 gauge wire and a 16mm brass master thread that is inserted to meet auto manufacturing specifications of 200 ft. lbs. pull and 20 ft. lbs. torque. Price includes an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||IVSHKNWIENSH|,|SPDARACLSE|,|SPEED DAWG® RACING Ivory Shift Knob with Engraved Shift Pattern|,|SK503-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Ivory Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/4" diameter Ivory Shift Knob with Shift Pattern engraved on top. Select from 4, 5 or 6 speed patterns. Speed Dawg logo text is engraved on each side. Engraved text and linework color is Black. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left" "5 Speed- Reverse lower right" "
6 Speed-Reverse upper right" "Automatic"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||METHSHKNADKI|,|20MAMIINKN|,|SPEED DAWG® RACING Metric Thread Shift Knob Adapter Kit - 3 Sizes|,|SK500MET-3A|,|14.95|,|9.85|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Metric Thread Shift Knob Adapter Kit - 3 Sizes
This METRIC shift knob adapter kit contains 3 different sized adapters and the 3 corresponding jam nuts for use with shift knobs that have a 16mm x 1.50 I.D. thread size. The kit includes 1 each: 12 mm x 1.75 adapter & jam nut, 12 mm x 1.25 adapter & jam nut, 10 mm x 1.50 adapter & jam nut. Adapters made in USA.
|,|||-||METHSHKNADKI1|,|20MAMIINKN|,|SPEED DAWG® RACING Metric Thread Shift Knob Adapter Kit - 6 Sizes|,|SK500MET-6A|,|15.95|,|13.90|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Metric Thread Shift Knob Adapter Kit - 6 Sizes
This METRIC shift knob adapter kit contains 6 different sized adapters and the 6 corresponding jam nuts for use with shift knobs that have a 16mm x 1.50 I.D. thread size. The kit includes 1 each: 8mm x 1.25 adapter & jam nut, 10 mm x 1.25 adapter & jam nut, 10 mm x 1.50 adapter & jam nut, 12 mm x 1.25 adapter & jam nut, 12 mm x 1.50 adapter & jam nut, 12 mm x 1.75 adapter & jam nut. Adapters made in USA.
|,|||-||MIBLSHKNWIEN|,|SPDARACLSE|,|SPEED DAWG® RACING Midnight Blue Shift Knob with Engraved Shift Pattern|,|SK545-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Midnight Blue Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/8" Diameter Midnight Blue Shift Knob with Engraved Shift Pattern and side logo text. Select from 4, 5, 6 speed or Automatic shift patterns. Call if you need a pattern that is not listed in the drop box at right. Comprised of specially formulated high-impact polymer resin. This knob has a 16mm x 1.5 brass Master Insert and comes with a free adapter and jam nut. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left" "5 Speed- Reverse lower right" "6 Speed-Reverse upper right" "Automatic"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||NOSHADKIT|,|20MAMIINKN|,|SPEED DAWG® RACING Non-Threaded Shifter Adapter Kit|,|SK500-NT|,|38.95|,|32.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Non-Threaded Shifter Adapter Kit
This adapter kit enables you to put a threaded Speed Dawg shift knob on a non-threaded shifter. Polished aluminum finish with 3 set screws. Inside diameter is 5/8". Includes 3 nylon sleeves with inside diameters of 9/16", 1/2", and 3/8".
|,|||-||ORBLRASTSHKN|,|SPDARARASE1|,|SPEED DAWG® RACING Orange / Black Rally Stripe Shift Knob|,|SK507NL-RB|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Orange / Black Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Orange Shift Knob with Black Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||ORCLSPSHKNWL|,|SPDARAHOTROD|,|SPEED DAWG® RACING Orange / Clear Splash Shift Knob w/ logo|,|SK544-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Orange / Clear Splash Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Orange / Clear Splash Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund. Please note that each splash-style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||ORCLSPSHKNWI1|,|SPDARACLSE|,|SPEED DAWG® RACING Orange / Clear Splash Shift Knob with Engraved Shift Pattern|,|SK544-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Orange / Clear Splash Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/8" Diameter Orange / Clear Splash Shift Knob with engraved Shift Pattern and side logos. Select from 4, 5 or 6 speed shift patterns. Call if your pattern is not listed in the drop box at right. Comprised of specially formulated high-impact polymer resin. This knob has a 16mm x 1.5 brass Master Insert and comes with a free adapter kit. Please note that each splash-style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left""4 Speed -Reverse Lower Right" "5 Speed- Reverse lower right" "6 Speed-Reverse upper right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||PIPESHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Pink Pearl Shift Knob|,|SK525-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Pink Pearl Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Pink Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||PIPESHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Pink Pearl Shift Knob w/ logo|,|SK525-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Pink Pearl Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Pearl Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARAPISE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING PINSTRIPE SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||BLVONHOTRODS|,|SPDARAPISE|,|SPEED DAWG® RACING PINSTRIPED SPIDER WEB SHIFT KNOB BY VON HOT ROD|,|SK501VSW-PS|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Black Von Hot Rod Signature Pinstripe Shift Knob
Superior quality Black 2-1/4" diameter shift knob featuring pinstripe design and signature created by world famous pinstriper Von Hot Rod. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|"Select Color" "Select Here" "Green (SK539VSW-PS)" "Purple (SK535VSW-PS)" "Red (SK504VSW-PS)" "Black Metalflake (SK549VSW-PS)" "Blue Metalflake (SK548VSW-PS)" "Green Metalflake (SK556VSW-PS)" "Purple Metalflake (SK533VSW-PS)" "Red Metalflake (SK542VSW-PS)"|-||-|||-||PUPESHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Purple Pearl Shift Knob|,|SK524-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Purple Pearl Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Purple Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||PUPESHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Purple Pearl Shift Knob w/ logo|,|SK524-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Purple Pearl Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Purple Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARARASE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING RACING SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||SPDARARASE1|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING RALLY SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||SPDARAREFIBL|,|SPEEDDAWG|,|SPEED DAWG® RACING Real Fire - Blue airbrushed shift knob|,|SK501AB-RFB|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Real Fire - Blue airbrushed shift knob
AIRBRUSHED SERIES. Premium 2-1/8" diameter shift knob with Blue Real Flame design. Each Airbrushed Series shift knob is individually painted by professional airbrush artist Andy Stapp. Graphics are subsurface and will not wear off. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.5 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARAREFIOR|,|SPEEDDAWG|,|SPEED DAWG® RACING Real Fire - Orange airbrushed shift knob|,|SK501AB-RFO|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Real Fire - Orange airbrushed shift knob
AIRBRUSHED SERIES. Premium 2-1/8" diameter shift knob with Orange Real Flame design. Each Airbrushed Series shift knob is individually painted by professional airbrush artist Andy Stapp. Graphics are subsurface and will not wear off. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.5 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARAREDWHR|,|SPDARARASE|,|SPEED DAWG® RACING Red / White Racing Stripe Shift Knob|,|SK504NL-MW|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Red / White Racing Stripe Shift Knob
Premium quality 2-1/8" diameter Red Shift Knob with 3 White Racing Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "Select Shift Pattern" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|"12 Volt Momentary Switch option" "Select 12 Volt Momentary Switch Option" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch add(+$25.95)"|-||-|||-||REDWHRASTSHK|,|SPDARARASE1|,|SPEED DAWG® RACING Red / White Rally Stripe Shift Knob|,|SK504NL-RW|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Red / White Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Red Shift Knob with White Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPEED-DAWG-RED-PEARL-SHIFT-KNOB|,|SPDARASTSE|,|SPEED DAWG® RACING Red Pearl Shift Knob|,|SK526-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Red Pearl Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Red Pearl Shift Knob. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.5 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty. Please note that each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||REDPISHKN|,|SPDARAPISE|,|SPEED DAWG® RACING Red Pinstripe Shift Knob|,|SK504-PS|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Red Pinstripe Shift Knob
PINSTRIPE SERIES. Premium 2-1/4" Diameter Red Shift Knob with old school lettering and pinstripe design created by world famous pinstriper Von Hot Rod. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||REDSHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Red Shift Knob w/ logo|,|SK504-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Red Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Red Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert. A free adapter and jam nut is included. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||REDSHKNWI12V|,|SPDARABUSE|,|SPEED DAWG® RACING Red Shift Knob with 12 Volt Button Switch|,|SK504-HR-12|,|75.90|,|65.90|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Red Shift Knob with 12 Volt Button Switch
BURNOUT SERIES. Premium 2-1/8" Diameter Red Shift Knob with subsurface Speed Dawg logo and heavy duty 12 Volt Momentary Switch for Line Lock, Trans Brake or Nitrous applications. Manufactured from a high-impact polymer resin that is custom formulated for shift knobs. Each is equipped with 20 inches of 18 gauge wire and a 16mm brass master thread that is inserted to meet auto manufacturing specifications of 200 ft. lbs. pull and 20 ft. lbs. torque. Price includes an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Reducer Kit" "10mm x 1.25"|-||-|||-||SPEED-DAWG-RACING-RESTORATION-BLACK-SHIFT-KNOB-WITH-ENGRAVED-SHIFT-PATTERN|,|SPDARARESE|,|SPEED DAWG® RACING RESTORATION Black Shift Knob with Engraved Shift Pattern|,|SK501-RE-P|,|45.95|,|35.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING RESTORATION Black Shift Knob with Engraved Shift Pattern
RESTORATION SERIES. Black 2" diameter shift knob with engraved White shift pattern. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.50 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
If you are not completely satisfied with this item you may return it within 30 days for a full refund. A 1-year limited warranty is included.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARARESE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING RESTORATION SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||STTHSHKNADKI|,|20MAMIINKN|,|SPEED DAWG® RACING Standard Thread Shift Knob Adapter Kit - 4 Sizes|,|SK500STD-4A|,|17.95|,|9.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Standard Thread Shift Knob Adapter Kit - 4 Sizes
This STANDARD shift knob adapter kit contains 4 different sized adapters and the 4 corresponding jam nuts for use with shift knobs that have a 16mm x 1.50 I.D. thread size. The kit includes 1 each: 1/2 - 20 adapter & jam nut, 3/8 - 16 adapter & jam nut, 3/8 - 24 adapter & jam nut, 5/16 - 18 adapter & jam nut. Adapters made in USA.
|,|||-||STTHSHKNADKI1|,|20MAMIINKN|,|SPEED DAWG® RACING Standard Thread Shift Knob Adapter Kit - 6 Sizes|,|SK500STD-6A|,|35.55|,|25.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Standard Thread Shift Knob Adapter Kit - 6 Sizes
This STANDARD shift knob adapter kit contains 6 different sized Brass adapters and the 6 corresponding jam nuts for use with shift knobs that have a 16mm x 1.50 I.D. thread size. The kit includes 1 each: 5/16 - 18 adapter & jam nut, 3/8 - 16 adapter & jam nut, 3/8 - 24 adapter & jam nut, 7/16 - 20 adapter & jam nut, 1/2 - 13 adapter & jam nut, 1/2 - 20 adapter & jam nut. Adapters made in USA.
|,|||-||SPDARASTSE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING STEALTH SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||SPDARATRSE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|SPEED DAWG® RACING TRADITIONAL SERIES|,||,||,||,||,||,||,||,||,||,||,|||-||SPDARATRBLSH|,|SPDARASTSE|,|SPEED DAWG® RACING Transparent Blue Shift Knob|,|SK543-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Transparent Blue Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Transparent Blue Shift Knob. Comprised of specially formulated high-impact polymer resin. A free brass adapter & jam nut is included. Made in the USA. Comes with a 30 day money back guarantee
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||TRBLSHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Transparent Blue Shift Knob w/ logo|,|SK543-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Transparent Blue Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Transparent Blue Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||TRBLSHKNWIEN|,|SPDARACLSE|,|SPEED DAWG® RACING Transparent Blue Shift Knob with Engraved Shift Pattern|,|SK543-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Transparent Blue Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/8" Diameter Transparent Blue Shift Knob with Engraved Shift Pattern and side logo text. Select from 4, 5, 6 speed or Automatic shift patterns. Call if you need a pattern that is not listed in the drop box at right. Comprised of specially formulated high-impact polymer resin. This knob has a 16mm x 1.5 brass Master Insert and comes with a free adapter and jam nut. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left" "5 Speed- Reverse lower right" "6 Speed-Reverse upper right" "Automatic"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||TRREDSHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Transparent Red Shift Knob|,|SK541-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Transparent Red Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Transparent Red Shift Knob. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||TRREDSHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING Transparent Red Shift Knob w/ logo|,|SK541-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Transparent Red Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Transparent Red Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a free adapter kit. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||TRREDSHKNWIE|,|SPDARACLSE|,|SPEED DAWG® RACING Transparent Red Shift Knob with Engraved Shift Pattern|,|SK541-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Transparent Red Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/8" Diameter Transparent Red Shift Knob with Engraved Shift Pattern and side logo text. Select from 4, 5 or 6 speed patterns. Call if you need a pattern that is not listed in the drop box at right. Comprised of specially formulated high-impact polymer resin. This knob has a 16mm x 1.5 brass Master Insert and comes with a free adapter kit. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left" "5 Speed- Reverse lower right" "6 Speed-Reverse upper right" "Automatic"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHBLRASTSHKN|,|SPDARARASE|,|SPEED DAWG® RACING White / Black Racing Stripe Shift Knob|,|SK502NL-MBK|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White / Black Racing Stripe Shift Knob
Premium quality 2-1/8" diameter White Shift Knob with 3 Black Racing Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "Select Shift Pattern" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|"12 Volt Momentary Switch option" "Select 12 Volt Momentary Switch Option" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch add(+$25.95)"|-||-|||-||WHBLRASTSHKN1|,|SPDARARASE|,|SPEED DAWG® RACING White / Blue Racing Stripe Shift Knob|,|SK502NL-MBL|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White / Blue Racing Stripe Shift Knob
Premium quality 2-1/8" diameter White Shift Knob with 3 Blue Racing Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "Select Shift Pattern" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|"12 Volt Momentary Switch option" "Select Here" "No" "Yes (+$25.95)"|-||-|||-||WHBLRASTSHKN2|,|SPDARARASE1|,|SPEED DAWG® RACING White / Blue Rally Stripe Shift Knob|,|SK502NL-RB|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White / Blue Rally Stripe Shift Knob
Premium quality 2-1/8" diameter White Shift Knob with Blue Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHBLRASTSHKN3|,|SPDARARASE1|,|SPEED DAWG® RACING White / Blue Rally Stripe Shift Knob w/ Side Logos|,|SK502-RB|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White / Blue Rally Stripe Shift Knob w/ Side Logos
Premium quality 2-1/8" diameter White Shift Knob with Blue Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Speed Dawg logo text is engraved on each side. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHORRASTSHKN|,|SPDARARASE1|,|SPEED DAWG® RACING White / Orange Rally Stripe Shift Knob|,|SK502NL-RO|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White / Orange Rally Stripe Shift Knob
Premium quality 2-1/8" diameter White Shift Knob with Orange Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "5 Speed- Reverse Upper Left" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHPEGRRASTSH|,|SPDARARASE1|,|SPEED DAWG® RACING White / Pearl Gray Rally Stripe Shift Knob|,|SK502NL-RG|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White / Pearl Gray Rally Stripe Shift Knob
Premium quality 2-1/8" diameter White Shift Knob with Pearl Gray Rally Stripes and your choice of shift pattern. Look closely and you can see the detail of the pearl effect in the dual stripes. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHPEGRRASTSH1|,|SPDARARASE1|,|SPEED DAWG® RACING White / Pearl Gray Rally Stripe Shift Knob w/ Side Logos|,|SK502-RG|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White / Pearl Gray Rally Stripe Shift Knob w/ Side Logos
Premium quality 2-1/8" diameter White Shift Knob with Pearl Gray Rally Stripes and your choice of shift pattern. Look closely and you can see the detail of the pearl effect in the dual stripes. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Speed Dawg logo text is engraved on each side. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPDARAWHREDR|,|SPEEDDAWG|,|SPEED DAWG® RACING White / Red Rally Stripe Shift Knob|,|SK502NL-RR|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White / Red Rally Stripe Shift Knob
RALLY SERIES. Premium quality 2-1/8" diameter White Shift Knob with Red Rally Stripes and your choice of shift pattern. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Weight is 3.9 ounces. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.50 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
Contact us if you need a shift pattern that is not listed in the pull-down menu. This knob may be ordered with side logo text. Custom lettering is also available. If you are not completely satisfied with this item you may return it within 30 days for a full refund. A 1-year limited warranty is included.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "5 Speed- Reverse Upper Left" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||WH4SPSHKN|,|SPDARARESE|,|SPEED DAWG® RACING White 4 Speed Shift Knob|,|SK502-RE-4RUL|,|45.95|,|35.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White 4 Speed Shift Knob
White 1-7/8" diameter shift knob with engraved Black 4 Speed shift pattern. Excellent reproduction of the original shift knob from back in the day. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Includes your choice of adapter size and jam nut. Comes with a 30 day money back guarantee. Made in USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||COUNTRYSPEEDKNOBWHITE|,|SPDARATRSE|,|SPEED DAWG® RACING White County Prison 5 Speed Shift Konb|,|SK502-CPBK-5RDR|,|50.00|,|39.95|,||,||,|0.000 |,||,||,||,|TRADITIONAL SERIES. White 2-1/8" diameter shift knob with engraved Black 5 Speed Reverse Lower Right shift pattern. COUNTY PRISON text replaces the 4 and 5 speed numerals. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.50 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA. Please allow up to 4 weeks for production of out of stock items. If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHSHKNWLO|,|SPDARAHOTROD|,|SPEED DAWG® RACING White Shift Knob w/ logo|,|SK502-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/4" Diameter White Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. We can provide adapters to fit nearly any shifter.
Contact us toll free at (619) 466-4282 if you need a thread size that is not included in the Shift Knob Adapter Kit listed in the Online Store. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPEED-DAWG-RACING-RESTORATION-WHITE-SHIFT-KNOB-WITH-ENGRAVED-SHIFT-PATTERN|,|SPDARARESE|,|SPEED DAWG® RACING White Shift Knob with Engraved Shift Pattern|,|SK502-RE-P|,|45.95|,|35.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White Shift Knob with Engraved Shift Pattern
RESTORATION SERIES. White 2" diameter shift knob with engraved Black shift pattern. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.50 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
If you are not completely satisfied with this item you may return it within 30 days for a full refund. A 1-year limited warranty is included.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHSHKNWIENSH|,|SPDARACLSE|,|SPEED DAWG® RACING White Shift Knob with Engraved Shift Pattern|,|SK502-CL-P|,|52.95|,|42.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White Shift Knob with Engraved Shift Pattern
CLASSIC SERIES. Premium 2-1/4" diameter White Shift Knob with Shift Pattern engraved on top. Select from 4, 5 or 6 speed patterns. Call if you need a pattern that is not listed in the drop box at right. Speed Dawg logo text is engraved on each side. Engraved text and linework color is Black. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Shift Pattern" "-Select Shift Pattern-" "4 Speed -Reverse upper left" "5 Speed- Reverse lower right" "6 Speed-Reverse upper right" "Automatic"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||WHSHKNWIENSI|,|SPDARACLSE|,|SPEED DAWG® RACING White Shift Knob with Engraved Side Logo|,|SK502-CL|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING White Shift Knob with Engraved Side Logo
CLASSIC SERIES. Premium 2-1/4" diameter White Shift Knob with Speed Dawg logo text engraved on each side. Logo text color is Black. Comprised of specially formulated high-impact polymer resin. A free adapter kit is included. Made in the USA. Comes with a 30 day money back guarantee.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||YEBLRASTSHKN|,|SPDARARASE|,|SPEED DAWG® RACING Yellow / Black Racing Stripe Shift Knob|,|SK509NL-MB|,|79.95|,|69.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Yellow / Black Racing Stripe Shift Knob
Premium quality 2-1/8" diameter Yellow Shift Knob with 3 Black Racing Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "Select Shift Pattern" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right" "6 Speed-Reverse Upper Left"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|"12 Volt Momentary Switch option" "Select 12 Volt Momentary Switch Option" "Do not include 12 Volt Momentary Switch 12V" "Add a 12 Volt Momentary Switch add(+$25.95)"|-||-|||-||YEBLRASTSHKN1|,|SPDARARASE1|,|SPEED DAWG® RACING Yellow / Black Rally Stripe Shift Knob|,|SK509NL-RB|,|74.95|,|64.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Yellow / Black Rally Stripe Shift Knob
Premium quality 2-1/8" diameter Yellow Shift Knob with Black Rally Stripes and your choice of shift pattern. Contact us toll free at (619) 466-4282 if you need a shift pattern that is not listed in the pull-down menu. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a threaded Brass adapter kit in your choice of thread size. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund.
|,|"Shift Pattern" "-Select Shift Pattern-" "5 Speed- Reverse Lower Right" "6 Speed-Reverse Upper Right"|-||-|"Adapter Kit" "10mm x 1.25"|-||-|||-||YECLSPSHKNWL|,|SPDARAHOTROD|,|SPEED DAWG® RACING Yellow / Clear Splash Shift Knob w/ logo|,|SK545-HR|,|49.95|,|39.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Yellow / Clear Splash Shift Knob w/ logo
HOT ROD SERIES. Premium 2-1/8" Diameter Yellow / Clear Splash Shift Knob. Comprised of specially formulated high-impact polymer resin. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with an adapter kit in your choice of either Standard or Metric thread sizes. Made in the USA. If you are not completely satisfied with this item you may return it within 30 days for a full refund. Please note that each splash-style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||YECLSPSHKN|,|SPDARASTSE|,|SPEED DAWG® RACING Yellow Shift Knob|,|SK509-ST|,|44.95|,|34.95|,||,||,|0.000 |,||,||,||,|SPEED DAWG® RACING Yellow Shift Knob
STEALTH SERIES. Premium 2-1/8" diameter Yellow Shift Knob. Comprised of specially formulated high-impact polymer resin specifically designed to meet performance level torque and temperature requirements. This knob has a 16mm x 1.5 Brass master insert and comes with a threaded Brass adapter & jam nut in the size of your choice. Made in the USA.
Free Speed Dawg Shift Knobs decal included with every order!
Please allow up to 4 weeks for delivery of out of stock items. Factory Mustang shifters may require a Boot Retainer to complete the installation. Corvette thread sizes (9/16-18 & C6-C7) may require up to 4 weeks for production and delivery If you are not completely satisfied with this item you may return it within 30 days for a full refund. 1 year limited warranty. California residents click here for Proposition 65 WARNING label. Made in the USA.
|,|"Adapter Kit" "10mm x 1.25"|-||-|||-||SPEDSIA716|,|SPEDWH1|,|Sport Edition A12|,|TR-A12|,|189.99|,|139.04|,||,||,|5.000 |,||,||,||,|Sport Edition A12
Description
* Size: 15x6.5
* Offset: 38mm
* Backspacing: 5.24"
* Bolt Pattern: 5-114
* Rec. Tire Size: 195/50-15
* Weight: 16.05 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
* Size: 16x7.5
* Offset: 38mm
* Backspacing: 5.79"
* Bolt Pattern: 5-114
* Rec. Tire Size: 205/45-16
* Weight: 19.45 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
Features:
* Center cap shown included at no charge.
* The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(16) Required lugnut for vehicle (nickel plated)
* Price per rim. Order quantity 4 for full set.
|,|"Select Size" "15x6.5, 38mm Offset" "16x7.5, 38mm Offset add(+$20)"|-||-|"Select Finish" "Matte Titanium"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||SPEDSICD15|,|SPEDWH1|,|Sport Edition A13 Matte Titanium 16x7.5, 38mm Offset|,|TR-A13|,|189.05|,|139.05|,||,||,|5.000 |,||,||,||,|Sport Edition A13 Matte Titanium 16x7.5, 38mm Offset
Description
* Size: 16x7.5
* Offset: 38mm
* Backspacing: 5.79"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 20.35 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
Features:
* Center cap shown included at no charge.
* The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(16) Required lugnut for vehicle (nickel plated)
* Price per rim. Order quantity 4 for full set.
|,|"Shipping cost" "add(+$45)"|-||-|||-||SPEDSICD16|,|SPEDWH1|,|Sport Edition A8 Titanium Gunmetal 15x6.5, 38mm Offset|,|TR-A8|,|185.99|,|138.45|,||,||,|5.000 |,||,||,||,|Sport Edition A8 15x6.5, 38mm Offset
Description
* Size: 15x6.5
* Offset: 38mm
* Backspacing: 5.31"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 15.0 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
Features:
* Seven-spoke
* One-piece, cast
* Snap-in, exposed lugs
* Center cap shown included at no charge.
* The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(16) Required lugnut for vehicle (nickel plated)
* Price per rim. Order quantity 4 for full set.
|,|"Select Finish" "Titanium Gunmetal" "Bright Silver Paint"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||SPEDBRSAWLIP|,|SPEDWH1|,|Sport Edition CS1|,|TR-CS1|,|189.99|,|142.02|,||,||,|5.000 |,||,||,||,|Sport Edition CS1
Description
* Size: 15x6
* Offset: 43mm
* Backspacing: 5.20"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 15.0 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
* Size: 14x6
* Offset: 42mm
* Backspacing: 5.16"
* Bolt Pattern: 4-100
* Rec. Tire Size: 185/60-14
* Weight: 13.0 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
Features:
* Center cap shown included at no charge.
* The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring.
(1) Lug adapter
(16) Required lugnut for vehicle (nickel plated)
* Price per rim. Order quantity 4 for full set.
|,|"Select Size" "14x6, 42mm Offset" "15x6, 43mm Offset add(+$20)"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||SPEDBRSAWLIP2|,|SPEDWH1|,|Sport Edition P5 Anthracite Painted 16x7, 40mm Offset|,|TR-SPRTEDITBRTSTNCE17x7-5|,|169.99|,|149.25|,||,||,|5.000 |,||,||,||,|Sport Edition P5 16x7, 40mm Offset
Description
* Size: 16x7
* Offset: 40mm
* Backspacing: 5.629"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 17.25 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
Features:
* Center cap shown included at no charge.
* The following wheel-specific hardware will be included with your order at no additional charge.
Required centering ring
Sport Edition F5 center cap
Required lugnut for vehicle (nickel plated)
* Price per rim. Order quantity 4 for full set.
|,|"Shipping cost" "add(+$45)"|-||-|||-||SPEDSICE15|,|SPEDWH1|,|Sport Edition P5 Bright Silver Paint|,|TR-P5-2|,|189.99|,|142.02|,||,||,|5.000 |,||,||,||,|Sport Edition P5 Bright Silver Paint
Description
* Size: 15x6.5
* Offset: 40mm
* Backspacing: 5.393"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 15.8 lbs
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
* Size: 17x7.5
* Offset: 40mm
* Backspacing: 5.866"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 20.65 lbs.
* Construction: 1pc. Gravity Cast
* Finish Warranty: 1 Year
Features:
* Center cap shown included at no charge.
* The following wheel-specific hardware will be included with your order at no additional charge.
(4) Required centering ring
(1) Lug adapter
(4) Sport Edition F5 center cap
(16) Required lugnut for vehicle (nickel plated)
* Price per rim. Order quantity 4 for full set.
|,|"Select Size" "15x6.5, 40mm Offset" "17x7.5, 40mm Offset add(+$45)"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||SPEDSIA7161|,||,|Sport Edition Silver A7 16x7.5|,|TR-NCSEA7|,|115.95|,|105.95|,||,||,|10.000 |,||,||,||,|
Size: 16x7.5
Offset: +50mm
Backspacing: 6.25"
Bolt Pattern: 5-114
Rec. Tire Size: 205/50-16
Weight: 18.5lbs
Finish: Silver
Construction: 1 Pc. Gravity Cast
Finish Warranty: 1 Year
Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||SPEDSICE16|,||,|Sport Edition Silver CE 16x7.5|,|TR-SPRTEDITSLVCE16x7-5|,|99.99|,|89.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 16x7.5
* Offset: 40mm
* Backspacing: 5.86"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 17.0lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSICE17|,||,|Sport Edition Silver CE 17x7.5|,|TR-SPRTEDITSLVCE17x7-5|,|109.99|,|99.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 17x7.5
* Offset: 40mm
* Backspacing: 5.82"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 17.0lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSID514|,||,|Sport Edition Silver D5 14x6|,|TR-SPRTEDITSLVD514x6|,|86.99|,|76.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 14x6
* Offset: 38mm
* Backspacing: 5.04"
* Bolt Pattern: 4-100
* Rec. Tire Size: 185/60-14
* Weight: 13.2lbs
* Finish: Silver
* Construction: 1pc. Low Pressure Cast/Shot Peened
* Finish Warranty: 2 Years
* Manufactured in Thailand
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSID515|,||,|Sport Edition Silver D5 15x6.5|,|TR-SPRTEDITSLVD515x6-5|,|94.99|,|84.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 15x6.5
* Offset: 38mm
* Backspacing: 5.28"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 13.2lbs
* Finish: Silver
* Construction: 1pc. Low Pressure Cast/Shot Peened
* Finish Warranty: 2 Years
* Manufactured in Thailand
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF215|,||,|Sport Edition Silver F2 15x6.5|,|TR-SPRTEDITSLVF215x6-5|,|87.99|,|77.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 15x6.5
* Offset: 40mm
* Backspacing: 5.35"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 17.0lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF216|,||,|Sport Edition Silver F2 16x7|,|TR-SPRTEDITSLVF216x7|,|95.99|,|85.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 16x7
* Offset: 40mm
* Backspacing: 5.51"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 17.0lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF514|,||,|Sport Edition Silver F5 14x6|,|TR-SPRTEDITSLVF514x6|,|88.99|,|78.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 14x6
* Offset: 38mm
* Backspacing: 5.04"
* Bolt Pattern: 4x114.3
* Rec. Tire Size: 185/60-14
* Weight: 14.4lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF515|,||,|Sport Edition Silver F5 15x7|,|TR-SPRTEDITSLVF515x7|,|98.99|,|88.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 15x7
* Offset: 40mm
* Backspacing: 5.59"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 17lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF516|,||,|Sport Edition Silver F5 16x7.5|,|TR-SPRTEDITSLVF516x7-5|,|109.99|,|99.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 16x7.5
* Offset: 40mm
* Backspacing: 5.82"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 19.8lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF716|,||,|Sport Edition Silver F7 16x7|,|TR-SPRTEDITSLVF716x7|,|95.99|,|85.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 16x7
* Offset: 40mm
* Backspacing: 5.59"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 20.0lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF717|,||,|Sport Edition Silver F7 17x7.5|,|TR-SPRTEDITSLVF717x7-5|,|109.99|,|99.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 17x7.5
* Offset: 40mm
* Backspacing: 5.83"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Weight: 20.0lbs
* Finish: Silver
* Construction: 1pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF915|,||,|Sport Edition Silver F9 15x6.5|,|TR-SPRTEDITSLVF915x6-5|,|101.99|,|91.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 15x6.5
* Offset: +40mm
* Backspacing: 5.31"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 18.4lbs
* Finish: Bright Silver
* Construction: 1 Pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDSIF916|,||,|Sport Edition Silver F9 16x7.5|,|TR-SPRTEDITSLVF916x7-5|,|109.99|,|99.99|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 16x7.5
* Offset: +40mm
* Backspacing: 5.86"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 18.4lbs
* Finish: Bright Silver
* Construction: 1 Pc. Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||SPEDWH1|,||,|Sport Edition Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||SPEDWH|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Sport Edition Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||TR-SPORTTUNINGST1|,|SPTUWH1|,|Sport Tuning ST1 Machined w/Black Accent|,|tr-sporttuningst1|,|220.95|,|159.95|,||,||,||,||,||,||,|Sport Tuning ST1 Machined w/Black Accent
Size:16x7.5
Offset:38mm
Backspacing:5.787"
Bolt Pattern:5-100
Rec. Tire Size:205/55-16
Weight:19.35 lbs.
Finish:Machined w/Black Accent
Construction:1pc. Gravity Cast
Size:17x8
Offset:48mm
Backspacing:6.417"
Bolt Pattern:5-114
Rec. Tire Size:225/45-17
Weight:22.05 lbs.
Finish:Machined w/Black Accent
Construction:1pc. Gravity Cast
|,|"Select Size" "Select Here" "16 x 7.5" "17 x 8 add(+$15)"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||SPTUT10MAWAC|,|SPTUWH1|,|Sport Tuning T10 Machined w/Black Accent 15x6.5, 16x7.5|,|TS-STT10MCBLKACCNT15x6-5|,|209.99|,|169.95|,||,||,|5.000 |,||,||,||,|Front and Rear
* Size: 15x6.5
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Offset: +40mm
* Finish: Machined w/Black Accent
* Size: 16x7.5
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/55-16
* Offset: +35mm
* Finish: Machined w/Black Accent
*Price per rim. Order quantity 4 for full set*
|,|"Select Size" "Select Here" "15x6.5" "16x7.5"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||SPTUT10MAWAC3|,|SPTUWH|,|Sport Tuning T10 Machined w/Black Accent 17x7.5|,|TR-NCSTT1017x7-5|,|219.95|,|179.95|,||,||,|10.000 |,||,||,||,|
Front and Rear
* Size: 17x7.5
* Bolt Pattern: 5x114.3
* Rec. Tire Size: 205/40-17
* Finish: Machined w/Black Accent
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping cost" "add(+$45)"|-||-|||-||SPTUT6MAWAC1|,|SPTUWH1|,|Sport Tuning T6 Machined w/Black Accent 15x6.5|,|TS-STT6MCBLKACCNT15x6-5|,|189.99|,|145.95|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 15x6.5
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Finish: Machined w/Black Accent
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping cost" "add(+$45)"|-||-|||-||SPTUT6MAWAC13|,|SPTUWH|,|Sport Tuning T6 Machined w/Black Accent 17x7.5|,|TR-NCSTT617|,|209.95|,|159.95|,||,||,|10.000 |,||,||,||,|
Front and Rear
* Size: 17x7.5
* Bolt Pattern: 5-114.3
* Rec. Tire Size: 205/40-17
* Finish: Machined w/Black Accent
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping cost" "add(+$45)"|-||-|||-||SPTUT6MAWAC12|,|SPTUWH1|,|Sport Tuning T6 Machined w/Black Accent 17x8|,|TS-STT6MCBLKACCNT17x8|,|209.99|,|159.95|,||,||,|5.000 |,||,||,||,|
Front and Rear
* Size: 17x8
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/40-17
* Finish: Machined w/Black Accent
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping cost" "add(+$45)"|-||-|||-||SPTUWH1|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|Sport Tuning Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||SPTUWH|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|Sport Tuning Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||DVP-2001|,||,|Stainless Steel Air Diversion Panel 90-98 Mazda Miata (w/ Pop-up Headlamps)|,|DVP-2001|,|75.99|,|68.99|,||,||,|0.000 |,||,||,||,|Stainless Steel Air Diversion Panel 90-98 Mazda Miata (w/ Pop-up Headlamps)
|,|||-||STLEBCOSPFLA|,|OWNERS-SHOWCASE|,|Stan Lewis
Coral Springs, Fla|,|101-102|,||,||,||,||,||,||,||,||,|JUST LUV ALL YOUR PARTS.MY 04 TURBO
LOOKS AND RUNS HOT.....You should add the aem air kit for turbos to your inventory.
Stand Lewis
Coral Springs, FL
Check out his GoMiata mods to the right
|,|||-||STATUS-RACING-CARBON-FIBER-STEERING-WHEEL|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Status Racing Carbon Fiber Steering Wheel|,|SR-WHEEL-CF|,|350.00|,||,||,||,||,||,||,||,|Status Racing Carbon Fiber Steering Wheel
Status Racing’s all new ultra-light Carbon Fiber Steering wheel will separate your interior from the rest! Its 3-spoke design is made using 100% carbon fiber and is finished in high gloss for a sporty yet elegant look. Pair this steering wheel up with a set of Status Racing Carbon Fiber seats and Shift Knob for the perfect combination! The horn button features the Status Racing “S” logo with black oxide hardware and finishing ring. This steering wheel requires the use of an adapter hub specific to your vehicle for installation. This product is intended for off-road use.
Features:
- 100% Carbon Fiber
- 3-Spoke Design
- High Gloss Finish
- Wheel Diameter 342mm | 13.5”
Includes:
- Status Racing “S” Horn Button
- Black Center Ring
- 6x Black Oxide Alloy Steel Allen Hardware
|,|||-||STATUS-RACING-DRIFT-LEATHER-STEERING-WHEEL|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2006-2012|,|Status Racing Drift Leather Steering Wheel|,|SR-WHEEL-R|,|170.00|,||,||,||,||,||,||,||,|Status Racing Drift Leather Steering Wheel
Status Racing’s all new Leather Steering wheel will separate your interior from the rest! It stylish and sporty 3-spoke design features anodized red finish with matching center ring and Status Racing “S” horn button. The outer wheel has been wrapped in black leather and has been embroidered with the “STATUS” logo in red stitching for added style and refinement. Pair this steering wheel together with a set of Status Racing seats and shift knob for the ultimate interior upgrade. This steering wheel requires the use of an adapter hub specific to your vehicle for installation. This product is intended for off-road use
Features:
- Aluminum 3-Spoke Design
- Anodized Red Finish
- Black Leather with Red Embroidered “Status” Logo
- Red Visual Indicator
- Wheel Diameter 342mm | 13.5”
Includes:
- Status Racing “S” Horn Button
- Color Matched Red Center Ring
- 6x chrome Alloy Steel Allen Hardware
|,|||-||STATUS-RACING-SEAT-3|,|20MAMIINSEDO|,|Status Racing Seats|,||,||,||,||,||,||,||,||,||,||,|||-||STATUS-RACING-SEAT-2|,|NBINVIALL|,|Status Racing Seats|,||,||,||,||,||,||,||,||,||,||,|||-||GOINSTCO|,|DONTMISS|,|STAY CONNECTED|,||,||,||,|STAY CONNECTED: GO MIATA FACEBOOK AND TWITTER|,|tmcicongomiatalink.jpg|,||,||,||,|http://lib.store.yahoo.net/lib/gomiata/facebookicon.jpg
insidericon.jpg
http://twitter.com/GoMiata"target="_blank"><
|,|
|,|||-||STSHADSPWIQD|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Steering Shaft Adaptor - Splined with QD|,|MC-SSA|,|189.99|,|169.95|,||,||,|0.000 |,||,||,||,| Miata Steering Shaft Adaptor - Splined with QD
The steering shaft adaptor is a thread on piece with 2 set screws that threads on the existing steering shaft in 1990-2005 Mazda Miatas and 2006 + Mazda MX5's. The splined adaptor comes complete with quick release hub. The adaptor is roughly 4"in length extends the steering wheel rearward roughly 2" closer to the driver.
New Design - The QD now has 3 locations that index instead of 2 like all the others, so it makes for a slop free precise design.
Fit all Miatas including the 2006, as well as RX-8's.
If you measure from the dash where the interior light dimmer switch is located back to the center of the steering wheel, the Stock wheel since it is dished is 8" to the center of the wheel. The Momo style (non dished) flat style wheel with our adapter is 9.5" to the center of the wheel. If you need the wheel to be moved further back towards the driver, you can add one of our steering shaft spacers to add 1/2" of additional length per spacer.
The adaptor is now plated Black only.
|,|||-||STSHSP|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Steering Shaft Spacer|,|MC-SSS|,|79.99|,|59.99|,||,||,|0.000 |,||,||,||,| Miata Steering Shaft Spacer
Lightweight and just the right size, this steering shaft spacer is designed to work in conjunction with our steering shaft adaptor and our steering wheel adaptor to allow you to fine tune how close the steering wheel is to you in the car. The steering shaft spacer matches the exact interior design of our steering wheel adaptor for a secure fit and balance.
The steering shaft spacer is 1/2" thick and can be added to and placed in between the steering wheel adaptor and the steering shaft adaptor to move the steering wheel further back in the car, closer to you as the driver for that perfect steering wheel location.
You can add as many steering wheel spacers as you desire, you only need to change the bolt length to accomodate the # of 1/2" spacers you add.
|,|"Select Size" "Select Here" "1/2 Inch Steering Shaft Spacer" "2.5 Inch Steering Shaft Spacer"|-||-|||-||STWHADL|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Steering Wheel Adaptor (Lightweight)|,|MC-SWA|,|89.99|,|79.95|,||,||,|0.000 |,||,||,||,| Steering Wheel Adaptor (Lightweight), 5 Bolt or 6 Bolt
This is the lightest version of the steering wheel adaptor we can produce. This adaptor weighs roughly 1 lb and fits either Momo, Sparco, or OMP style 6 bolt steering wheels, or select Grant 5 bolt style option.
This product works with our Steering Shaft Adaptor and our Steering Shaft Spacer. You can add a Steering Shaft Spacer to the adaptor to bring the steering wheel closer to you in the car. The spacers are 1/2" in length and you can stack as many as you desire to gain the perfect steering wheel placement.
Spacer comes with 3 allen head bolts to attach to quick disconnects.
Available in Black or Red Anodize.
|,|Color "Black"|-||-|Style "Momo, Sparco, OMP - 6 Bolt" "Grant - 5 Bolt"|-||-|||-||STEP1PRODUCTS|,|SHOP-BY-TOP-MIATA-BRANDS-ZYMOL|,|Step 1 Products: WASHING|,||,||,||,||,||,||,||,||,||,||,|||-||ST2PRCL|,|SHOP-BY-TOP-MIATA-BRANDS-ZYMOL|,|Step 2 Products: CLEANING|,||,||,||,||,||,||,||,||,||,||,|||-||ST3PRFE|,|SHOP-BY-TOP-MIATA-BRANDS-ZYMOL|,|Step 3 Products: FEEDING|,||,||,||,||,||,||,||,||,||,||,|||-||STKOSC|,|OWNERS-SHOWCASE|,|Steve Koss
Lancaster, SC|,|stkosc|,||,||,||,||,||,||,|afdasfa|,||,|How it all started. In August of 1999 I needed a car to go back and forth the Charlotte NC that got good MPG. I researched and found out that Miatas not only get great gas MPG but are very reliable too. I then started my research. I wanted a 1994 or up as long as it fit in my budget I then found one from a reputable dealer with 68000 miles and that is where it all began.
I'm almost finished with it after 5 years in the making. The only thing left is for a turbo and NOS on it. I did everything else first and now to save 8000 to finish it for good. Ya Right. It will always be a work in progress. Please let me know what you think of my years of work.
Steve Koss
Lancaster, SC
|,|||-||STMIHOCA|,|OWNERS-SHOWCASE|,|Steve Mirkin
North Hollywood, CA|,|newitem109927537|,||,||,||,||,||,||,||,||,|As a customer of Go Miata, I thought you'd enjoy this photo of my 2001 Miata Special Edition model.
It is British Racing Green, tan leather interior and has the Nardi wood steering wheel and shift knob. Paint and interior were near new and the all the mechanical portions of the car worked beautiful.
I have had other Miata owners see my car and they are so surprised to see a fully optioned S.E. like this one. I am very lucky to own it and it is a pleasure to drive My wife and me call it, "happy, fun car"
The photo of the car was taken back in November of 2006 when we purchased the car. The lincese plate frame was made once we purchase the car. I always look at the XK8's on the road and think what my car is the little brother of those wonderful cars.
Steve Mirkin,
North Hollywood, CA
|,|||-||STILLEN-MAZDA-MIATA-SPORT-ROTORS-1-PIECE-1994-2005|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Stillen Mazda Miata Front Cross Drilled & Slotted 1-Piece Sport Rotors 1994-2005|,|MAZ2100XS|,|211.44|,|197.90|,||,||,||,||,||,||,|Stillen Mazda Miata Front Cross Drilled & Slotted 1-Piece Sport Rotors 1994-2005
STILLEN 1-piece Sport Rotors are a great choice for performance, durability and style when staying with OE factory calipers. These high-performance upgrades directly replace those plain OE factory rotors with no modification required. Applications for cars are finished with a clear zinc plating for exceptional corrosion resistance. Most truck and SUV applications have a tough, black e-coat to keep the elements at bay.
Why cross-drilled or slotted (or both)?
Cross-drilled rotors are a quick and simple way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder when it’s time to stop NOW! Tests have shown (and drivers can feel) the immediate improvement. The holes also provide better cooling under hard use. Pad wear may be accelerated slightly (depending on driving technique), so only high quality brake pads should be considered. Cross-drilled rotors are not recommended for track duty – choose slotted rotors instead.
Slotted rotors provide some of the increased pad bite that cross-drilled rotors do, but can handle the heat of more aggressive use. The slots act as a wiper, cleaning the pad face as they go by to reduce pad glazing, keeping the pads fresh for optimal performance. If taking the car often to track days or where very spirited driving is the norm, slotted rotors are the smart choice.
Cross-drilled and slotted rotors combine the best of both. Fewer holes mean longer pad life with little penalty in the way of initial pad bite. These are popular, aggressive-looking patterns that look great behind those custom wheels.
|,|"Application" "Mazda Miata 1994-2005"|-||-|"Special Handling fee" "add(+$10)"|-||-|||-||STOPTECH-BIG-BRAKE-KIT-FOR-MAZDA-MIATA---II|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|StopTech Big Brake Kit for Mazda Miata - NA/NB 1.8 NonSport BBK - Individual Parts|,|stoptech-big-brake-kit-for-mazda-miata---ii|,|88.63|,|79.95|,||,||,||,||,||,||,|Mazda Miata StopTech Big Brake Kit - NA/NB 1.8 NonSport BBK
Product Description:
Gomiata is so excited to share the news about Stoptech’s new big brake kit for the 1990-1997 NA Miata and 1999-2005 NB Miata! Garage Star will have the first set of Stoptech BBK’s on our shop NA and NB. Like all Stoptech products they went through rigorous testing to ensure they are making the highest quality kit on the market. Gomiata is an authorized dealer of all Centric & StopTech products for race and street!
Please read carefully before choosing your kit. We have full kits available and a la carte. If you already have some of the components we allow you to pick and choose what you need for your kit. For a la carte order use the drop down and click (add to cart). When you are finished adding what you need for your brake kit you can view cart and check out. For any questions feel free to call or email us.
The 1.8 BBK uses a 30mm-36mm piston bore combination to work with the 1.8 OE Master Cylinder.
The 1.8 Sport kits use a 36mm-38mm piston bore combination, due to the larger rear Sport brakes and Master cylinder.
Flagship kit: Stoptech offers the ability to go up to the 1.8 Sport kit from any 1.6 or 1.8. This CAN include a Sport Master Cylinder, rear sport calipers, rear sport rotor, front StopTech BBK and SS lines and pads on all four corners. This kit has the deepest capability of all the BBKs we offer for NA/NB Miatas.
- 1.8 Sport BBK (Rotor, Caliper, Lines, Bracket)
- 1.8 Sport Master Cylinder (1.6 and 1.8 guys need this)
- 1.8 Sport OE rear rotors (1.6 and 1.8 guys need this)
- 1.8 Sport OE rear calipers (1.6 and 1.8 guys need this)
- StopTech rear SS brake lines
- Choice of Street or Race pads
- For the 1.8 BBK we CAN include Rear OE calipers for a 1.6 to 1.8 BBK upgrade. This would not need a different Master cylinder. This kit maximizes stopping power on the 1.8 platform.
- 1.8 BBK (Rotor, Caliper, Lines, Bracket)
- Optional 1.8 OE Rear Calipers (1.6 guys need this)
- Optional 1.8 rear Rotors (1.6 guys need this)
- StopTech rear SS brake lines
- Choice of Street or Race pads
What rotor diameter?
– 280mm
-Caliper is StopTech’s ST42, so any pads made for this caliper can be purchased. However, StopTech will be recommending specific friction compounds based on application; street or race. The friction recommendations are based on test vehicle results and are designed to work with the piston sizing and master cylinder specified.
Race Pad compounds based on FMSI# DR22. SR33 compound front. 309 compound rear.
- INDIVIDUAL PART#:
Rear NonSport Street Pads (309.06360)
Rear NonSport Slotted Rotor (126.45035SR/126.45035SL)
Rear NonSport Race Pads (309.06360)
Rear SS Lines (950.45508)
http://www.stoptech.com/racing/racin…ing-brake-pads
Street performance/Sport Brake Pads – StopTech’s 309 compound for Sport is already available in the OE Miata pad shapes, covering the rear of the kits. It will also be offered in the DR22 pad shape, developed specifically for the front of the Miata BBK.
|,|"Select Item" "Select Here" "Rear NonSport Street Pads" "Rear NonSport Slotted Rotor add(+$80)" "Rear NonSport Race Pads add(+$50)" "Rear SS Lines add(+$40)"|-||-|||-||STOPTECH-BIG-BRAKE-KIT-FOR-MAZDA-MIATA---II-2|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|StopTech Big Brake Kit for Mazda Miata - NA/NB 1.8 NonSport BBK - Whole Kit|,|stoptech-big-brake-kit-for-mazda-miata---ii-2|,|4,799.80|,|4,199.95|,||,||,||,||,||,||,|Mazda Miata StopTech Big Brake Kit - NA/NB 1.8 NonSport BBK
Product Description:
Please read carefully before choosing your kit. We have full kits available and a la carte. If you already have some of the components we allow you to pick and choose what you need for your kit. For a la carte order use the drop down and click (add to cart). When you are finished adding what you need for your brake kit you can view cart and check out. For any questions feel free to call or email us.
The 1.8 BBK uses a 30mm-36mm piston bore combination to work with the 1.8 OE Master Cylinder.
The 1.8 Sport kits use a 36mm-38mm piston bore combination, due to the larger rear Sport brakes and Master cylinder.
Flagship kit: Stoptech offers the ability to go up to the 1.8 Sport kit from any 1.6 or 1.8. This CAN include a Sport Master Cylinder, rear sport calipers, rear sport rotor, front StopTech BBK and SS lines and pads on all four corners. This kit has the deepest capability of all the BBKs we offer for NA/NB Miatas.
- 1.8 Sport BBK (Rotor, Caliper, Lines, Bracket)
- 1.8 Sport Master Cylinder (1.6 and 1.8 guys need this)
- 1.8 Sport OE rear rotors (1.6 and 1.8 guys need this)
- 1.8 Sport OE rear calipers (1.6 and 1.8 guys need this)
- StopTech rear SS brake lines
- Choice of Street or Race pads
- For the 1.8 BBK we CAN include Rear OE calipers for a 1.6 to 1.8 BBK upgrade. This would not need a different Master cylinder. This kit maximizes stopping power on the 1.8 platform.
- 1.8 BBK (Rotor, Caliper, Lines, Bracket)
- Optional 1.8 OE Rear Calipers (1.6 guys need this)
- Optional 1.8 rear Rotors (1.6 guys need this)
- StopTech rear SS brake lines
- Choice of Street or Race pads
What rotor diameter?
– 280mm
-Caliper is StopTech’s ST42, so any pads made for this caliper can be purchased. However, StopTech will be recommending specific friction compounds based on application; street or race. The friction recommendations are based on test vehicle results and are designed to work with the piston sizing and master cylinder specified.
Race Pad compounds based on FMSI# DR22. SR33 compound front. 309 compound rear.
http://www.stoptech.com/racing/racin…ing-brake-pads
Street performance/Sport Brake Pads – StopTech’s 309 compound for Sport is already available in the OE Miata pad shapes, covering the rear of the kits. It will also be offered in the DR22 pad shape, developed specifically for the front of the Miata BBK.
|,|"Choose an Option" "Choose an Option" "Front NonSport NA/NB Big Brake Kit Only Street Pads (83.552.GY00.A1)" "Front NonSport NA/NB Big Brake Kit Only Race Pads (87.552.GV00.A1)" "Full NonSport NA/NB Big Brake Kit Race Pads"
"Full NonSport NA/NB Big Brake Kit Street Pads"|-||-|"Shipping & Handling fee" "add(+$95)"|-||-|||-||STOPTECH-BIG-BRAKE-KIT-FOR-MAZDA-MIATA|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|StopTech Big Brake Kit for Mazda Miata - NA/NB 1.8 Sport BBK - Individual Parts|,|stoptech-big-brake-kit-for-mazda-miata|,|159.00|,|129.95|,||,||,||,||,||,||,|Mazda Miata StopTech Big Brake Kit - NA/NB 1.8 Sport BBK
Product Description:
Gomiata is so excited to share the news about Stoptech’s new big brake kit for the 1990-1997 NA Miata and 1999-2005 NB Miata! Garage Star will have the first set of Stoptech BBK’s on our shop NA and NB. Like all Stoptech products they went through rigorous testing to ensure they are making the highest quality kit on the market. Gomiata is an authorized dealer of all Centric & StopTech products for race and street!
Please read carefully before choosing your kit. We have full kits available and a la carte. If you already have some of the components we allow you to pick and choose what you need for your kit. For a la carte order use the drop down and click (add to cart). When you are finished adding what you need for your brake kit you can view cart and check out. For any questions feel free to call or email us.
The 1.8 BBK uses a 30mm-36mm piston bore combination to work with the 1.8 OE Master Cylinder.
The 1.8 Sport kits use a 36mm-38mm piston bore combination, due to the larger rear Sport brakes and Master cylinder.
Flagship kit: Stoptech offers the ability to go up to the 1.8 Sport kit from any 1.6 or 1.8. This CAN include a Sport Master Cylinder, rear sport calipers, rear sport rotor, front StopTech BBK and SS lines and pads on all four corners. This kit has the deepest capability of all the BBKs we offer for NA/NB Miatas.
- 1.8 Sport BBK (Rotor, Caliper, Lines, Bracket)
- 1.8 Sport Master Cylinder (1.6 and 1.8 guys need this)
- 1.8 Sport OE rear rotors (1.6 and 1.8 guys need this)
- 1.8 Sport OE rear calipers (1.6 and 1.8 guys need this)
- StopTech rear SS brake lines
- Choice of Street or Race pads
- For the 1.8 BBK we CAN include Rear OE calipers for a 1.6 to 1.8 BBK upgrade. This would not need a different Master cylinder. This kit maximizes stopping power on the 1.8 platform.
- 1.8 BBK (Rotor, Caliper, Lines, Bracket)
- Optional 1.8 OE Rear Calipers (1.6 guys need this)
- Optional 1.8 rear Rotors (1.6 guys need this)
- StopTech rear SS brake lines
- Choice of Street or Race pads
What rotor diameter?
– 280mm
-Caliper is StopTech’s ST42, so any pads made for this caliper can be purchased. However, StopTech will be recommending specific friction compounds based on application; street or race. The friction recommendations are based on test vehicle results and are designed to work with the piston sizing and master cylinder specified.
Race Pad compounds based on FMSI# DR22. SR33 compound front. 309 compound rear.
-INDIVIDUAL PART#:
Rear SS Lines (950.45508)
Sport Master Cylinder W/ABS (130.45806)
Sport Master Cylinder No ABS (130.45805)
Rear Sport Calipers (141.45518/41.45517)
Rear Sport Slotted Rotor
Rear Sport Race Pads (309.08910)
Rear Sport Street Pads (309.08910)
http://www.stoptech.com/racing/racin…ing-brake-pads
Street performance/Sport Brake Pads – StopTech’s 309 compound for Sport is already available in the OE Miata pad shapes, covering the rear of the kits. It will also be offered in the DR22 pad shape, developed specifically for the front of the Miata BBK.
|,|"Select Item" "Select Here" "Rear SS Lines" "Sport Master Cylinder W/ABS add(+$38)" "Sport Master Cylinder No ABS add(+$32)" "Rear Sport Calipers add(+$189)" "Rear Sport Slotted Rotor add(+$135)" "Rear Sport Race Pads add(+$15)" "Rear Sport Street Pads add(+$15)"|-||-|||-||STOPTECH-BIG-BRAKE-KIT-FOR-MAZDA-MIATA-2|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|StopTech Big Brake Kit for Mazda Miata - NA/NB 1.8 Sport BBK - Whole Kit|,|stoptech-big-brake-kit-for-mazda-miata-2|,|4,799.80|,|4,199.95|,||,||,||,||,||,||,|Mazda Miata StopTech Big Brake Kit - NA/NB 1.8 Sport BBK
Product Description:
Please read carefully before choosing your kit. We have full kits available and a la carte. If you already have some of the components we allow you to pick and choose what you need for your kit. For a la carte order use the drop down and click (add to cart). When you are finished adding what you need for your brake kit you can view cart and check out. For any questions feel free to call or email us.
The 1.8 BBK uses a 30mm-36mm piston bore combination to work with the 1.8 OE Master Cylinder.
The 1.8 Sport kits use a 36mm-38mm piston bore combination, due to the larger rear Sport brakes and Master cylinder.
Flagship kit: Stoptech offers the ability to go up to the 1.8 Sport kit from any 1.6 or 1.8. This CAN include a Sport Master Cylinder, rear sport calipers, rear sport rotor, front StopTech BBK and SS lines and pads on all four corners. This kit has the deepest capability of all the BBKs we offer for NA/NB Miatas.
- 1.8 Sport BBK (Rotor, Caliper, Lines, Bracket)
- 1.8 Sport Master Cylinder (1.6 and 1.8 guys need this)
- 1.8 Sport OE rear rotors (1.6 and 1.8 guys need this)
- 1.8 Sport OE rear calipers (1.6 and 1.8 guys need this)
- StopTech rear SS brake lines
- Choice of Street or Race pads
- For the 1.8 BBK we CAN include Rear OE calipers for a 1.6 to 1.8 BBK upgrade. This would not need a different Master cylinder. This kit maximizes stopping power on the 1.8 platform.
- 1.8 BBK (Rotor, Caliper, Lines, Bracket)
- Optional 1.8 OE Rear Calipers (1.6 guys need this)
- Optional 1.8 rear Rotors (1.6 guys need this)
- StopTech rear SS brake lines
- Choice of Street or Race pads
What rotor diameter?
– 280mm
-Caliper is StopTech’s ST42, so any pads made for this caliper can be purchased. However, StopTech will be recommending specific friction compounds based on application; street or race. The friction recommendations are based on test vehicle results and are designed to work with the piston sizing and master cylinder specified.
Race Pad compounds based on FMSI# DR22. SR33 compound front. 309 compound rear.
http://www.stoptech.com/racing/racin…ing-brake-pads
Street performance/Sport Brake Pads – StopTech’s 309 compound for Sport is already available in the OE Miata pad shapes, covering the rear of the kits. It will also be offered in the DR22 pad shape, developed specifically for the front of the Miata BBK.
|,|"Choose an Option" "Choose an Option" "Full Sport NA/NB Big Brake Kit Race Pads" "Full Sport NA/NB Big Brake Kit Street Pads"
"Front Sport NA/NB Big Brake Kit Only Race Pads (87.557.GV00.A1)"
"Front Sport NA/NB Big Brake Kit Only Street Pads (83.557.GY00.A1)"|-||-|"Shipping & Handling fee" "add(+$95)"|-||-|||-||STOPTECH-FRONT-BBK-FOR-1-6-NA-MIATA|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|StopTech Front Big Brake Kit for Mazda Miata 1.6 NA |,|stoptech-front-bbk-for-1-6-na-miata|,|1,395.00|,|1,195.00|,||,||,||,||,||,||,|Mazda Miata StopTech Front BBK for 1.6 NA
Product Description
StopTech’s Big Brake Kit for the 1.6 NA Miata! StopTech Big Brake Kits are the ultimate high-performance brake upgrades, giving vehicles that supercar performance, look, and feel.
If your rear calipers are stock, be sure to pick up the matched StopTech Rear 1.6 NA Performance Brake Pads too.
|,|"Choose an Option" "Choose an Option" "Anodized Calipers (83.558.GY00.A1)" "Red Calipers (83.558.GY00.71) add(+$120)"|-||-|"Shipping & Handling fee" "add(+$85)"|-||-|||-||ST83-551-4300-71|,|20MAMIBRROBR|,|StopTech Mazda Miata NC Front BBK With Calipers Slotted 328x28mm Rotors Pads Lines 2006-2015|,|st83-551-4300-71|,|2,350.00|,|1,749.45|,||,||,||,||,||,||,|StopTech Mazda Miata NC Front BBK w/ Red Calipers Slotted 328x28mm Rotors Pads Lines 2006-2015
|,|"Select Calipers Color" "Select Here" "Red" "Blue (21)" "Silver (61)" "Yellow (81)" "Trophy (R1) add(+$800)"|-||-|"Shipping & Handling" "add(+$95)"|-||-|||-||ST332-802216-0|,|19MAMIBRROPA1|,|StopTech Race/Track Mazda Miata NA/NB Front Brake Pads for ST/R42 Caliper |,|st332-802216-0|,|229.45|,|189.02|,||,||,||,||,||,||,|StopTech Race/Track Mazda Miata NA/NB Front Brake Pads for ST/R42 Caliper
332.802216.0 - SR32, 333.8022.16.0 - SR33, & 334.8022.16.0 - SR34
|,|"Select Option" "Select Here" "SR32" "SR33" "SR34"|-||-|||-||STOPTECH-REAR-1-6-PADS|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|StopTech Rear for Mazda Miata 1.6 NA Pads|,|Stoptech-309-04580|,|85.83|,|79.02|,||,||,||,||,||,||,|Mazda Miata StopTech Rear 1.6 NA Pads
Product Description:
StopTech’s 1.6 NA 309 performance pads are a great way to balance the power of the StopTech 1.6 Big Brake Kit
|,|||-||ST309-80220|,|19MAMIBRROPA1|,|StopTech Street/Performance Mazda Miata NA/NB BBK Sport Front Brake Pads |,|st309-80220|,|94.96|,|79.02|,||,||,||,||,||,||,|StopTech Street/Performance Mazda Miata NA/NB BBK Sport Front Brake Pads
308.80220 - 308 Street & 309.80220 - 309 Performance
|,|"Select Option" "309 Performance pads"|-||-|||-||909-550|,|19MAMISUANDU|,|Supercharger 70 mm Pulley Upgrade for MP62 by Track Dog Racing 1994-2005|,|909-550|,|151.05|,|128.99|,||,||,||,||,||,||,|Supercharger 70 mm Pulley Upgrade for MP62 by Track Dog Racing 1994-2005
1994-2005 MP62 Supercharged
There is a myth that superchargers can't use Air-to-Air intercoolers since they can't offset pressure losses due to piping and intercooler volume. However, superchargers have the advantage of providing instant boost and increase boost as the RPM increases. Pressure drop is negligible and the substantial cooling benefit of an Air-to-Air intercooler offsets any losses in boost levels by allowing your supercharger to work more efficiently. With cooler, denser intake air, timing retarding is reduced, producing even more horsepower. Since forced induction by nature produces extra heat, efficient cooling is critical to ensure maximum performance.
Some features and benefits:
Highest Quality Components
All-Aluminum core - 16"" W x 8"" H x 3"" D
304 Stainless Steel Piping - Brushed Finish
Powder-Coated Aluminum Radiator Cover
Three-ply silicon hoses
Typical efficiency about 80-85%†
Designed for the least amount of pressure drop
Plastic panels that enlarge the radiator shroud area
Cooler air reduces chances of detonation
More timing (less retard) can be added, producing more horsepower
More boost can be safely added
No maintenance
Simple installation
† Efficiency based on (Air exiting the compressor minus air exiting the intercooler) divided by (Air exiting the compressor minus ambient air). Example of Air-to-Air: 300F - 115F / 300F - 80F = .84 = 84% efficiency. Example of W/A: 250F - 180F / 250F - 80F = .41 = 41% efficiency.
|,|||-||TDR-PUL4|,|19MAMIENPECA1|,|Supercharger Nose Pulleys with M45 or MP62 Supercharger 1990-2005|,|TDR-PUL4-6-XX|,|159.99|,|135.00|,||,||,||,||,||,||,|Supercharger Nose Pulleys with M45 or MP62 Supercharger 1990-2005
These pulleys are CNC machined aluminum and anodized black. These are replacements/upgrades for either the M45 and MP62 depending on which belt system your blower uses.
|,|"Select Option" "Select Here" "4-Rip 62.5mm" "4-Rip 65 mm" "6-Rip 58 mm" "6-Rip 62.5 mm" "6-Rip 65 mm"|-||-|||-||TE5ZARDRGL|,|TEAM5ZIGEN|,|Team 5Zigen ARD-270 Driving Gloves |,|T5Z-WAARD270|,|169.95|,|169.50|,||,||,|0.000 |,||,||,||,|
Racing gear built to win. We continued to strive in developing products of upmost comfort, durability, and protection in all our product line. All our products are tested officially as required by FIA regulations. Made in Japan quality and size assurance, made to fit each driver perfectly.
We are officially registered with FIA and have been certified with the newest regulation, FIA 8856-2000.
|,|"Select Size" "Small" "Medium" "Large"|-||-|"Select Color" "Black" "Blue" "Red" "White"|-||-|||-||TE5ZARRAGL|,|TEAM5ZIGEN|,|Team 5Zigen ARD-272 Racing Gloves |,|T5Z-WAARD272|,|179.95|,|179.50|,||,||,|0.000 |,||,||,||,|
Racing gear built to win. We continued to strive in developing products of upmost comfort, durability, and protection in all our product line. All our products are tested officially as required by FIA regulations. Made in Japan quality and size assurance, made to fit each driver perfectly.
We are officially registered with FIA and have been certified with the newest regulation, FIA 8856-2000.
|,|"Select Size" "Small" "Medium" "Large"|-||-|"Select Color" "Black" "Blue" "Red" "White"|-||-|||-||61-1828|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Techna-Fit MX5 Miata Stainless Steel Brake Lines 2016-2022|,|61-1828|,|155.15|,|139.55|,||,||,||,||,||,||,|Techna-Fit MX5 Miata Stainless Steel Brake Lines 2016-2022
Fits ALL factory calipers - both standard calipers and Club model Brembo calipers.
Our Techna-Fit MX5 brake line kits come complete with all of the fittings and bolts for easy assembly. Techna-Fit high performance stainless braided brake lines eliminate the mushy pedal feel you get when your OEM MX5 rubber lines expand. All of Techna-Fit's assemblies are assembled in-house, meeting D.O.T. Certification.
Techna-Fit MX5 brake lines are made using teflon hose. The teflon hose has an extruded teflon core, with an outer stainless steel braided wire covering. The chrome or zinc plated steel fittings are then permanently crimped on each end.
All Techna-Fit hoses have a PVC cover, which gives added protection from flying debris; it also gives some abrasion protection from the line rubbing on suspension parts, in extreme braking conditions, with full compression (most movement of line). One advantage is that Techna-Fit MX5 brake lines reduce volumetric expansion. Over time and under continuous use, OEM MX5 rubber lines can swell and expand, exposing the driver to brake fade. The rubber cover is also vulnerable to attacks from the ozone layer (rubber deteriorates and causes failure).
In extreme applications (auto x, racing, hard driving) rubber Miata Brake line hoses might be susceptible to debris, thus causing failure. Stainless steel hoses provide some added protection from these issues. All Techna-Fit's factory assembled MX5 brake line kits are backed by their lifetime warranty.
*** Product images may differ from actual product appearance ***
|,|||-||61-1871|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Techna-Fit MX5 Stainless Steel Brake Lines - Rear Only 2016-2019|,|61-1871|,|89.00|,|78.95|,||,||,||,||,||,||,|Techna-Fit MX5 Stainless Steel Brake Lines - Rear Only 2016-2019
This is the rear portion of our Technafit stainless steel brake line kit for the standard brake calipers.
Our Techna-Fit MX5 brake line kits come complete with all of the fittings and bolts for easy assembly. Techna-Fit high performance stainless braided brake lines eliminate the mushy pedal feel you get when your OEM MX5 rubber lines expand. All of Techna-Fit's assemblies are assembled in-house, meeting D.O.T. Certification.
Techna-Fit MX5 brake lines are made using teflon hose. The teflon hose has an extruded teflon core, with an outer stainless steel braided wire covering. The chrome or zinc plated steel fittings are then permanently crimped on each end.
All Techna-Fit hoses have a PVC cover, which gives added protection from flying debris; it also gives some abrasion protection from the line rubbing on suspension parts, in extreme braking conditions, with full compression (most movement of line). One advantage is that Techna-Fit MX5 brake lines reduce volumetric expansion. Over time and under continuous use, OEM MX5 rubber lines can swell and expand, exposing the driver to brake fade. The rubber cover is also vulnerable to attacks from the ozone layer (rubber deteriorates and causes failure).
In extreme applications (autocross, racing, hard driving) rubber Miata Brake line hoses might be susceptible to debris, thus causing failure. Stainless steel hoses provide some added protection from these issues. All Techna-Fit's factory assembled MX5 brake line kits are backed by their lifetime warranty. Sorry, don't yet know if these work with the Brembo calipers.
*** Product images may differ from actual product appearance ***
|,|||-||61-0480|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Techna-Fit NA/NB Miata Stainless Steel Brake Lines 1990-2005|,|61-0480|,|159.95|,|139.99|,||,||,||,||,||,||,|Techna-Fit NA/NB Miata Stainless Steel Brake Lines 1990-2005
Our Techna-Fit brake line kits come complete with all of the fittings and bolts for easy assembly. Techna-Fit high performance stainless braided brake lines eliminate the mushy pedal feel you get when your OEM rubber lines expand. All of Techna-Fit's assemblies are assembled in-house, meeting D.O.T. Certification. Techna-Fit brake lines are made using teflon hose. The teflon hose has an extruded teflon core, with an outer stainless steel braided wire covering. The chrome or zinc plated steel fittings are then permanently crimped on each end. All Techna-Fit hoses have a PVC cover, which gives added protection from flying debris; it also gives some abrasion protection from the line rubbing on suspension parts, in extreme braking conditions, with full compression (most movement of line). One advantage is that Techna-Fit lines reduce volumetric expansion. Over time and under continuous use, OEM rubber lines can swell and expand, exposing the driver to brake fade. The rubber cover is also vulnerable to attacks from the ozone layer (rubber deteriorates and causes failure). In extreme applications (auto x, racing, hard driving) rubber hoses might be susceptible to debris, thus causing failure. Stainless steel hoses provide some added protection from these issues. All Techna-Fit's factory assembled line kits are backed by their lifetime warranty.
NOTE: Newest version of these lines has just one mounting hole in the distribution block on the right rear line, instead of two. Still the correct part and fits and works perfectly. Just install the block on either one of the two factory studs.
|,|||-||TEIN-HIGH-PERFORMANCE-SUSPENSION|,|SHOP-BY-TOP-MIATA-BRANDS|,|TEIN High Performance Suspension|,||,||,||,||,||,||,||,||,||,||,|||-||TEKNIQ|,|SHOP-BY-TOP-MIATA-BRANDS|,|TEKNIQ|,||,||,||,||,||,||,||,||,||,||,|||-||TEST-ITEM2|,||,|Test Item 2|,|test3|,|6.00|,|4.00|,||,||,|0.000 |,||,||,||,||,|||-||TESTING|,||,|Test Section|,||,||,||,||,||,||,||,||,||,||,|||-||TESTIMONIALS|,||,|Testimonials|,||,||,||,||,||,||,||,|fghafdh|,||,|
“I received excellent customer service without any time spent "on hold". My order shipped same day and arrived as scheduled. I would recommend Go Miata to anyone wanting good old fashion service with modern convenience.”
- Tracy, Harahan LA
"I am nothing but impressed with the service I received from GoMiata.com. Delivery was right on time. I placed one call to the folks at GoMiata.com and the people I spoke with were friendly, respectful and extremely courteous.
I look forward to doing much more business with them."
- Hugh Smith, '99 Brilliant Black
"Thank you so much for all of the AWESOME customer service you have provided. I received the "Z" Robbins plastic window yesterday afternoon. I truly appreciate the extra effort you have taken to insure that I (first) ordered the correct plastic window and (second) that I did
indeed actually receive it! I was quite surprised to get both a phone call and an email from you. Again, thank you for your most excellent customer service! I will bookmark your website and use in for all my Miata purchases in
the future....my friends even asked if you sold other car accessories and parts - not just for Miata's!"
- Sonya Davis, '90 Classic Red
"Very fast and responsive. Nice customer focus."
-Andrew McPhate, '92 Brilliant Black
"Very helpful and super friendly. Two thumbs up in my book."
- Victor Sawko, '99 Classic Red
“All that anyone could want from an on-line merchant. The correct item at a good price, shipped quickly. Highly recommended.”
- Jeff, California City CA
"After making my order for seat covers I received a call from a "Go Miata" rep who wanted to verify my shipping address because it did not seem like the address I had entered matched the zip code I had entered. She was correct and thankfully corrected the address before trying to ship or go any further with the order. On top of that while were on the phone she clarified some terminology that I did not understand and because of this she made some changes to my order so that I would receive the seat covers in the style and colors I was expecting. She also added some enhancements that I had not ordered because I did not entirely understand the terminology. The seats arrived and are just as expected. I will most definitely be making additional purchases from this company."
- George, Lakehills, TX
"I just wanted to let you know that I received my first order from you. I was very pleased with your customer service. I look forward to shopping with you again."
- Richard Sanchez, '92 White
"They were helpful even when I had to cancel a larger order in favor of a smaller one; they went out of their way to find what I needed elsewhere, and arranged shipping, although they did not have the items I required. Delighted with their service."
- Cyril Penn, '93 Classic Red
"Go Miata treated me like a long-valued customer - even though I was a first timer. A few quick emails to verify my order - then the next thing I knew, the goods were on my doorstep! I will return to Go Miata."
- Robert Bloedon, '96 Classic Red
"Thank you so much to Go Miata for the excellent support and their dedication to customer service, with their help I got the parts pre-painted with the good color code from Mazda and the installation was done very easily. Thank-you again Go Miata."
- Michel & France, Quebec, Canada
"What a great experience! They have raised the bar when it comes to customer service. Go-Miata stayed in contact with me throughout the entire order process, I knew the status of my order at all times without having to follow-up. Made me feel like they genuinely cared about my satisfaction and were committed to delivering the best service possible. You can’t go-wrong with Go-Miata!"
- Michael Greenwood, '99 Brilliant Black
"Thank you, I received my parts quickly. Keep up the
good prices."
- Greg Gagne, '90 Classic Red
"Order came in on - time and as expected. Installation was easy and worked out fine. Thanks for the good service and follow-up. Have "bookmarked" your web-site into my favorites for future reference and access.”
- Dale Viens, '92 White
"What a pleasant surprise! Go Miata far exceeded my expectations and went way beyond what I expected from a supplier for service and follow up! Thanks Go Miata....Keep up the great work."
- Mark Forkey, '01 Midnight Blue Mica
"Everything really was better than I expected. I placed 2 separate orders, and both were handled in a very professional manner. Email confirmation of my orders were sent within hours, confirming my order, the price, and shipping tracking numbers when the orders were shipped. I will be ordering from GoMiata again."
- Russ Shulz, '92 White
"I've bought all accessories from Go Miata and have never had a single complaint. Keep it up!!!"
- A.J. DiBartolomeo, '94 Red
"Go Miata is the BEST anywhere! Best Service, Best Prices, Best Follow up!"
- Frank McKamey, '03 Garnet Red
"Tout tres bien (all its ok) merci beaucoup!"
- Rossi, Les-Pennes-Mirabeau, France
|,|||-||TESTING1|,||,|testing|,|newitem166931439|,||,||,||,||,||,||,||,||,||,|||-||THANK-YOU|,||,|Thank you!|,||,||,||,||,||,||,||,||,||,|We appreciate you contacting us. One of our colleagues will get back in touch with you soon! Have a great day!
|,|||-||ORCA12JEWABL1|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|The Original California 12" Jelly Water Blade - SALE!!!|,|818-511|,|29.99|,|24.95|,||,||,|0.000 |,||,||,||,|The Original California 12" Jelly Water Blade - NEW!
Includes one Jelly Blade in your choice of Colors with Instructions. An Original California Car Product.
We’ve engineered and designed a new and improved version of The Original California Jelly Blade® and added many key features and benefits. The “Extender” end allows the Jelly Blade to reach into tight areas, and the “Detailer” end is great for recessed surfaces like side-view mirrors. It’s clearly the world’s most efficient car drying tool and is proudly made in the USA!
The Original California Jelly Blade!© removes water quickly, cleanly, and efficiently. It will mold itself to almost any contour, and dries the surface in one pass.
The Original California Jelly Blade has many unique properties such as the Ultra Flexible Handle and 12-1/2" long blade that is made of medical grade silicone, one of the most gentle and smooth substances available.
The combination of the flexible handle, flexible silicone blade, and the patented V-Blade makes the Jelly Blade the ULTIMATE versatile and efficient drying device available. Virtually eliminates messy chamois and towels.
If you are wondering which water blade we sell is the best... this is it... the ultimate incarnation of the Original California Water Blade.
BENEFITS ...
* Will not scratch even the most delicate surfaces (including the paint on your vehicle) (including glass and tile).
* Ultra Flexible Handle that comes in your choice of Two Colors (Red or Clear).
* Contours to rounded surfaces like fenders... Contours to uneven surfaces like tiles, tub basins, and glass block.
* New V-Blade design whisks water away.
* 90% of your car can be dried quickly and perfectly without messy towels, or chamois.
* Large, comfortable ABS plastic handle with ergonomically-designed grip to minimize fatigue during use.
* Dries vehicles in 1/3 the time.
* One pass dries it.
* Hundreds of uses around the house too. Quickly dries showers, windows, mirrors, and household spills.
|,|"Select Color" "Red" "Clear"|-||-|||-||CALDASDUS|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|The Original California Dash Duster|,|818-502|,|19.95|,|11.55|,||,||,|0.000 |,||,||,||,|Since we drive Miatas, we know how dirty and dusty the dash can get. Especially if you leave the top down most of the time. But now we just keep one of these in the glove compartment, and in 10 seconds our dash is clean and dust free!
Now it's possible to take advantage of the technology that's revolutionized the way people take care of the exterior of their cars... The amazing California Dash-Duster® has specially wax-treated cotton strands that literally "lift" dust without scratching anything. This unique compact, wedge-shaped Duster easily accesses hard-to-reach areas. Forget about spray waxes, dust cloths, feather dusters and the like. The Original California Dash-Duster® performs superbly and reliably for years. In fact, the "dirtier" it gets…the better it works!
|,|||-||ORCAMICARWAM|,|SOFTTOPNC|,|The Original California Microfiber Car Wash Mitt|,|818-506|,|15.99|,|10.95|,||,||,|0.000 |,||,||,||,|CAR WASH MICRO MITT ...
Includes one Micro Mitt in original retail packaging.
An Original California Car Product.
The Original California MicroMitt features the advanced Micro Fiber cleaning technology. Ultra soft Micro Fiber technology makes other wash and cleaning mitts obsolete!
Micro Fiber is 100 times finer than human hair.
The tiny fibers have micro-grooves which absorb fluids, plus angled edges which pull in dust and dirt.
Soft Micro Fiber will not scratch even the most delicate surfaces yet is both durable and washable.
|,|||-||CALCARDUS|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|The Original Magic Car DusterTM|,|818-501|,|29.99|,|21.95|,||,||,|0.000 |,||,|http://www.gomiata.com|,||,|"The Original Magic Car Duster" literally works like "Magic." You really have to use it to believe it! We use this on our company and show Miatas and we can go weeks without washing them! This really works great to lift off dust and soot.
It utilizes the proven technology of "baking" a special wax on the fine 100% soft cotton strands to assure that dust is lifted and removed… not just pushed around.
Exceptional performance sets "The Original Magic Car Duster®" apart from similar devices. It's compact, lightweight and easy to use. Comes complete with handy vinyl carrying case. Used by thousands of custom and show car enthusiasts.
Keeps vehicles looking "just washed".
Saves time, energy and resources.
Baked-on wax "lifts" dust.
Won't scratch paint.
Reduces required car washing.
The "dirtier" it gets…the better it works!
|,|||-||WEREMEMBER|,||,|These Colors Don't Run
We Remember September 11, 2001|,|weremember|,||,||,||,||,||,||,||,||,|From all of us at GoMiata, may the anniversary of September 11 bring us all closer together as Americans...And may we never forget how lucky we are to live in a country where we are truly free.
Our greatest glory is not in never falling, but in rising every time we fall.
|,|||-||TEST-ITEM|,|TESTING|,|This is a test item|,|test123|,|15,000.00|,|12,000.00|,||,||,|0.000 |,||,||,||,|This is a test item - Wooo Hooo!
|,|Color black Red Green|-||-|"What year"
1992 1997 2001|-||-|"What year What year What year" 1992 1997 2001|-||-|"What year" 1992 1997 2001|-||-|"What year" 1992 1997 2001|-||-|"What year" 1992 1997 2001|-||-|"What year" 1992 1997 2001|-||-|"What year" 1992 1997 2001|-||-|"What year" 1992 1997 2001|-||-|||-||TIMDOBNEWJE|,|OWNERS-SHOWCASE|,|Tim Doyle
New Jersey|,|999-100|,||,||,||,||,||,||,||,||,|Well I just want to say that I LOVE my Miata! It all started when I almost bought a Mazdaspeed NB but the dealership couldnt work out any numbers. So I went to another dealer and after three days of paperwork, drove away in a new 07 MX5. I was in love with the car, and I didnt even know how to drive stick haha! Almost a year later, and now I cant drive automatics and the car has truely been redone and made to how I want it. My list of mods are below, but I just wanted to thank Gomiata for all there great products and support.
As far as power mods go, the whole intake is redone with Racingbeat and Roadster Sport II Muffler pieces, and I have an intake. I installed chrome on alot of the outside of the car, and just redid the interior with brushed aluminum trim. Iv replaced the radio and installed Infinity Kappa speakers and amped them. Most recently I installed the neon underbody kit, which this site sells and love it. Its great for all the cars shows which I plan on attending all summer long.
Tim Doyle
New Jersey
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-TOKICO|,|SHOP-BY-TOP-MIATA-BRANDS|,|TOKICO|,||,||,||,||,||,||,||,||,||,||,|||-||TOHPSHAB99|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-AND-ACCESSORIES-1999-2005|,|Tokico HP Shock Absorber 1999-2004|,|304-755|,|115.00|,|97.95|,||,||,|0.000 |,||,||,||,|Manufactured by Tokico, this high performance gas shock will improve your Miata's performance and ride and provide longer life than the factory unit it replaces.
|,|"Please Select" "1 Front Shock" "1 Rear Shock"|-||-|||-||TOKILPERFRON|,|MAZDA-MX-5-MIATA-SUSPENSION-PARTS-1990-1997|,|Tokico Illumina Performance Shock 1990-1997|,|304-686|,|179.99|,|141.95|,||,||,|5.000 |,||,|sdfgdsfg|,||,|Tokico Illumina Performance Shock 1990-1997
For the serious enthusiast, TOKICO offers 5-position adjustable shocks and struts called Illumina. The adjustment system provides you with the ability to set your car up for a variety of uses.
A simple click of a screwdriver allows you to change for ride or handling balance. So whether you are going to the track, or simply cruising, the Illumina range of adjustment can adapt to your needs.
Internally, the Illumina uses TOKICO’s sophisticated multi-stage variable-aperture piston and valve system combined with a 5-position bypass shutter-valve.
This adjustment system makes it possible to adjust both rebound and compression damping simultaneously.
A detent on the shutter-valve helps adjustment ease so that you can make quick changes and still know which setting you have chosen.
Price is per shock.
|,|"Select" "Front Shock" "Rear Shock"|-||-|||-||SHOP-BY-TOP-MIATA-BRANDS|,|DONTMISS|,|TOP MIATA BRANDS|,||,||,||,|TOP MAZDA MX-5 MIATA BRANDS|,||,||,||,||,||,|
|,|||-||TOPSITECA|,|SOFTTOPPARTS|,|Top Side Tension Cables 1990-1997|,|ROB-2900|,|74.00|,|54.70|,||,||,|0.000 |,||,|agasdg|,||,|Convertible Top Side Tension Cables 1990-1997
This is a pair of side tension cables that can be replaced when replacing your top.
Like most convertible tops, the Miata uses steel tension cables that are threaded into the pockets that run along the side windows.
You can check your existing cables easily. With the top up and windows open, run your fingers along the edge of the top until you feel the cable inside edge of the top. If it feels tight, then it can most likely be reused when you replace your old convertible top. If it is loose, then it still may just need to be retensioned during the installation of the new top or you may need a new set of spring loaded tension cables.
|,|||-||TOUGERUN|,|SHOP-BY-TOP-MIATA-BRANDS|,|TougeRun|,||,||,||,||,||,||,||,||,||,||,|||-||TRACKDOGRACING|,|SHOP-BY-TOP-MIATA-BRANDS|,|Track Dog Racing|,||,||,||,||,||,||,||,||,||,||,|||-||TRDOGRAFRBRL|,|19MAMIBRROVI1|,|Track Dog Racing Brake Line Kit 1990-2005 FRONT ONLY|,|TDR-BRAK-LIN-F|,|95.00|,|79.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Track Dog Racing - Stainless Steel Brake Line Kit 1990-2005 FRONT ONLY
Our high performance stainless braided brake lines eliminate the mushy pedal feel you get when your OEM rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tube, this 4-line set is DOT-approved and works perfectly on the track or on the street. Includes all necessary mounting hardware. Fits 1990-2005 Miatas including the Mazdaspeed.
|,|||-||TRDOGRABRLIK|,|19MAMIBRROVI1|,|Track Dog Racing Brake Line Kit 1990-2005 REAR ONLY|,|TDR-BRAK-LIN-R|,|95.00|,|84.00|,||,||,|0.000 |,||,||,||,|Mazda Miata Track Dog Racing - Stainless Steel Brake Line Kit 1990-2005 REAR ONLY
Our high performance stainless braided brake lines eliminate the mushy pedal feel you get when your OEM rubber lines expand. Utilizing Teflon tubing with a stainless steel outer tube, this 4-line set is DOT-approved and works perfectly on the track or on the street. Includes all necessary mounting hardware. Fits 1990-2005 Miatas including the Mazdaspeed.
|,|||-||TDR-STEEL-PULLEYS|,|19MAMIENPEVI|,|Tracking Dog Racing Flanged Steel Idler Pulleys|,|TDR-SIPF|,|75.00|,|54.00|,||,||,|0.000 |,||,||,||,|Tracking Dog Racing Flanged Steel Idler Pulleys
Are your stock idler pulleys grooved or squealing? Is your belt out of line and running up against the plastic rim? We have found that these replaceable sealed bearing, flanged steel idler pulleys are a big improvement to those plastic ones that came with your supercharger kit. They are also supperior to our standard steel idler pulleys that came on the TDR tensioner as they have replaceable bearings and are flanged to aid in belt alignment. These pulleys are virtually indestructible and will never get damaged from belt wear.
Sold individually. You will need to order two to replace your original pulleys.
|,|||-||TRD-STYLE-TRUNK-SPOILER-NB|,||,|TRD Style Trunk Spoiler Mazda Miata 1999-2005|,|CMCF92|,|229.99|,|189.00|,||,||,|0.000 |,||,||,||,|TRD Style Trunk Spoiler Mazda Miata 1999-2005
*Please allow 30-40 days for production
This carbon fiber trunk spoiler has been designed following the famous TRD spoilers and gives the back of your car a vintage sporty touch. Looks great with the LED tail lights!
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
Available in Fiberglass (FRP), Carbon Fiber (CF) and Carbon Kevlar (CK). You can select the material to see the price.
|,|"Material" "Fiberglass" "Carbon Fiber add(+$100)" "Carbon Kevlar add(+$130)"|-||-|"EMS Shipping Cost" "add(+$55)"|-||-|||-||TRD-STYLE-TRUNK-SPOILER-NC|,||,|TRD Style Trunk Spoiler Mazda Miata 2006-2014|,|CM-CMCF72|,|224.95|,|185.00|,||,||,|0.000 |,||,||,||,|TRD Style Trunk Spoiler Mazda Miata 2006-2014
*Please allow 25-35 days for production time
Our first NC product! This spoiler only fits the NC WITH SOFT TOP. We are working on one for the PRHT trunk.
This carbon fiber trunk spoiler has been designed following the famous TRD spoilers and gives the back of your car a vintage sporty touch.
Specifications:
- 3K Carbon Fibre 1x1 twill (Made in Japan)
- 240g+450g Carbon Fibre/Carbon Kevlar manufactured using vacuum bag
- 45 degree weaving
- Anti-UV gloss clear coating for a long lasting shine and protection
- High grade 3M double side adhesive supplied with each spoiler
Available in Fiberglass (FRP) and Carbon Fiber (CF). You can select the material to see the price.
|,|"Options" "Fiberglass" "Carbon Fiber add(+$120)" "Carbon Kevlar add(+$160)"|-||-|"EMS Shipping Cost" "add(+$45)"|-||-|||-||NAB-5301|,|NEW|,|Tri Beveled Polished Vent Rings diamond tooled 1990 - 2005|,|NAB-5301|,|59.95|,|39.00|,||,||,||,||,||,||,|Tri Beveled Polished Vent Rings diamond tooled 1990 - 2005
Our Diamond Tooled Tri-Beveled Vent Ring sets are CNC machined from T6061 billet. A diamond tip cuts ultra fine machining lines in 3 contoured angles on to the Chrome surface which produces subtle yet stunning, rainbow like effects when exposed to light, Our A/C vent rings are sold as a set of four and install quickly and easily via 3M double-sided tape.
|,|||-||TRC1LIGRPA15|,|TRWH|,|TRMotorsport C1 Light Grey Painted 15x7 |,|TR-TRMC1LTGRY15x7|,|189.99|,|139.99|,||,||,|5.000 |,||,||,||,|TRMotorsport C1 Light Grey Painted 15x7
Front and Rear
* Size: 15x7
* Offset: +42mm
* Backspacing: 5.70"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 12.8lbs
* Finish: Light Grey Painted
* Construction: 1 Pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$39.99)"|-||-|||-||TRC1LIGRPA16|,|TRWH|,|TRMotorsport C1 Light Grey Painted 16x7 |,|TR-TRMC1LTGRY16x7|,|209.99|,|179.99|,||,||,|5.000 |,||,||,||,|TRMotorsport C1 Light Grey Painted 16x7
Front and Rear
* Size: 16x7
* Offset: +42mm
* Backspacing: 5.66"
* Bolt Pattern: 4-100
* Rec. Tire Size: 205/45-16
* Weight: 12.8lbs
* Finish: Light Grey Painted
* Construction: 1 Pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufactured in China
|,|"Shipping Cost" "add(+$45)"|-||-|||-||TRC1MBLPA15|,|TRWH|,|TRMotorsport C1M Black 15x7 |,|TR-TRMC1MBK15x7|,|209.99|,|159.99|,||,||,|5.000 |,||,||,||,|TRMotorsport C1M Black 15x7
Front and Rear
* Size: 15x7
* Offset: +30mm
* Backspacing: 5.19"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 13.6lbs
* Finish: Black Painted
* Construction: 1 Pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||TRC1MBRSI15|,|TRWH|,|TRMotorsport C1M Bright Silver 15x7 |,|TR-TRMC1MBTSLV15x7|,|209.99|,|159.99|,||,||,|5.000 |,||,||,||,|TRMotorsport C1M Bright Silver 15x7
Front and Rear
* Size: 15x7
* Offset: 30mm
* Backspacing: 5.19"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 13.2lbs
* Finish: Bright Silver Paint
* Construction: 1 Pc. Gravity Cast
* Finish Warranty: 1 Year
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||TRC1MLIGR15|,|TRWH|,|TRMotorsport C1M Light Grey 15x7 |,|TR-TRMC1MLTGRY15x7|,|209.99|,|159.99|,||,||,|5.000 |,||,||,||,|TRMotorsport C1M Light Grey 15x7
Front and Rear
* Size: 15x7
* Offset: +30mm
* Backspacing: 5.19"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 13.0lbs
* Finish: Light Grey Painted
* Construction: 1 Pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$49)"|-||-|||-||TRC3MBRSI|,||,|TRMotorsport C3M Bright Silver|,|TRM-C3MBS|,|119.99|,|109.99|,||,||,|0.000 |,||,||,||,|TRMotorsport C3M Bright Silver
Front and Rear
* Size: 15x9
* Offset: +36mm
* Backspacing: 6.41"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 15.8lbs.
* Finish: Bright Silver Paint
* Construction: 1 Pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufactured in China
Price per wheel
|,|||-||TRC3MBRSI15|,|TRWH|,|TRMotorsport C3M Bright Silver 15x9|,|TR-TRMC3MBRTSLV15x9|,|205.99|,|169.05|,||,||,|5.000 |,||,||,||,|TRMotorsport C3M Bright Silver 15x9
Front and Rear
* Size: 15x9
* Offset: +36mm
* Backspacing: 6.41"
* Bolt Pattern: 4-100
* Rec. Tire Size: 195/50-15
* Weight: 15.8lbs
* Finish: Bright Silver Paint
* Construction: 1 Pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|"Shipping Cost" "add(+$45)"|-||-|||-||TRWH|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-1999-2005|,|TRMotorsport Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||TRC2LIGR18|,|TRWH1|,|TRMotorsports C2 Light Grey 18x8|,|TR-TRMC218x8|,|165.95|,|159.95|,||,||,|10.000 |,||,||,||,|
* Size: 18x8
* Offset: +48mm
* Backspacing: 6.41"
* Bolt Pattern: 5-114
* Rec. Tire Size: 215/40-18
* Weight: 20.0lbs
* Finish: Light Grey
* Construction: 1 Pc. Gravity Cast
* Finish Warranty: 1 Year
* Manufactured in China
*Price per rim. Order quantity 4 for full set*
|,|||-||TRWH1|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|TRMotorsports Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||FP-TRUE-ITEM-IDS|,||,|true item ids|,||,||,||,||,||,||,||,||,||,||,|||-||QUHIPEBUGRE|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Turtle Wax Bug and Tar Remover, 16oz|,|WM-T-520A|,|19.99|,|15.02|,||,||,|0.000 |,||,||,||,|Turtle Wax Bug and Tar Remover, 16oz
* So effective - no special bug sponge needed!
* Safe for all vehicle surfaces - paint, windows, plastic, and chrome
* Will not strip away car's protective wax layer
* Removes tree sap and other sticky substances
* Easy to use
|,|||-||TYMBOKITFLI|,|NB19992005|,|Type M Body Kit (Front Lip) |,|BKS-TMFL|,|299.99|,|214.95|,||,||,|100.000 |,||,||,||,|Front Lip Only.
For Mazda Miata Years: 1999-2005.
|,|||-||TYMBOKITF|,|NB19992005|,|Type M Body Kit (Full)|,|BKS-TMF|,|839.99|,|598.95|,|Type M Body Kit (Full) 1999-2005|,||,|200.000 |,||,||,||,|Includes Front Lip, Side Skirts, and Rear Lip.
For Mazda Miata Years: 1999-2005
|,|||-||TYMBOKITRLI1|,|NB19992005|,|Type M Body Kit (Rear Lip) |,|BKS-TMFLR|,|299.99|,|214.95|,||,||,|50.000 |,||,||,||,|Rear Lip Only.
For Mazda Miata Years: 1999-2005.
|,|||-||TYMBOKITSSK|,|NB19992005|,|Type M Body Kit (Side Skirts)|,|BKS-TMFS|,|279.99|,|198.95|,||,||,|10.000 |,||,||,||,|Side Skirts Only - 1 Left Side Skirt, 1 Right Side Skirt.
For Mazda Miata Years: 1999-2005.
|,|||-||ALI-CARSNOW|,|NEW|,|Universal Exterior Windshield Protection Snow Ice Protector Shields|,|ali-carsnow|,|45.95|,|29.98|,||,||,||,||,||,||,|Universal Exterior Windshield Protection Snow Ice Protector Shields
|,|||-||113277|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Universal VRX V1 Tall Wing Complete Kit - 9 Piece|,|113277|,|1,112.00|,|1,094.00|,||,||,||,||,||,||,|Universal VRX V1 Tall Wing Complete Kit - 9 Piece
Universal 74" Carbon Creations DriTech VRX V1 Tall Wing Complete Kit - 9 Piece - Includes VRX Air Foil Blade (113241) VRX Wing Stands (113243) VRX Wing V1 End Caps (113245)
VRX wings from Carbon Creations are now available in a wide range of aggressive fitments. Whether attacking the track or shutting down the street, there's a VRX wing for your car. Check out the full line for width, stand, and end cap options to perfectly match your vehicle's size and style.
All VRX Wings from Carbon Creations come with premium, high strength steel stands for optimum rigidity. VRX stands and mounts come powder coated in a unique gloss black finish to protect against corrosion. Made using Carbon Creations' exclusive DriTech manufacturing technology, VRX blades come in 62", 66", 70", and 74" widths. DriTech provides maximum weight reduction and superior strength, sacrificing nothing. With class-leading attention to detail, and the industry's best warranty, there simply is no equal.
|,|"Select Blades Width" "Select Here" "62 inches" "66 inches add(+$225)" "70 inches add(+$275)" "74 inches add(+$325)"|-||-|"Select Material" "Select Here" "FRP (Fiberglass Reinforced Plastics)" "Carbon Creations DriTech add(+$225)"|-||-|"Shipping cost" "add(+$185)"|-||-|||-||113279|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-AND-ACCESSORIES-2016|,|Universal VRX V2 Tall Wing Complete Kit - 9 Piece|,|113279|,|1,312.00|,|1,094.00|,||,||,||,||,||,||,|Universal 74" VRX V2 Wing Complete Kit - 9 Piece
DESCRIPTION
Universal 74" Carbon Creations DriTech VRX V2 Short Wing Complete Kit - 9 Piece - Includes VRX Air Foil Blade (113241) VRX Wing Stands (113243) VRX Wing V2 End Caps (113247)
VRX wings from Carbon Creations are now available in a wide range of aggressive fitments. Whether attacking the track or shutting down the street, there's a VRX wing for your car. Check out the full line for width, stand, and end cap options to perfectly match your vehicle's size and style.
All VRX Wings from Carbon Creations come with premium, high strength steel stands for optimum rigidity. VRX stands and mounts come powder coated in a unique gloss black finish to protect against corrosion. Made using Carbon Creations' exclusive DriTech manufacturing technology, VRX blades come in 62", 66", 70", and 74" widths. DriTech provides maximum weight reduction and superior strength, sacrificing nothing. With class-leading attention to detail, and the industry's best warranty, there simply is no equal.
|,|"Select Blades Width" "Select Here" "62 inches" "66 inches add(+$225)" "70 inches add(+$275)" "74 inches add(+$325)"|-||-|"Select Material" "Select Here" "FRP (Fiberglass Reinforced Plastics)" "Carbon Creations DriTech add(+$180)"|-||-|"Shipping cost" "add(+$165)"|-||-|||-||VAMIBOKIT19|,|MAZDA-MX-5-MIATA-EXTERIOR-PARTS-1990-1997|,|Varis Miata Body Kit 1990-1997|,|CAD-2BOD|,|775.00|,|689.00|,||,||,|200.000 |,||,||,||,| Varis Miata Body Kit 1990-1997
Includes front bumper, side skirts, and rear bumper.
|,|"Freight Cost" "add(+$345)"|-||-|||-||VFSTIIUPON|,|19MAMIPEPA|,|VF Stage II Upgrade Only|,|299-350|,|699.00|,|599.00|,||,||,|0.000 |,||,||,||,|This Upgrade is for 1999-2000 Existing VF Supercharger owners who wish to go to Stage II.
Not avalable for other years.
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-VIS-RACING|,|SHOP-BY-TOP-MIATA-BRANDS|,|VIS Racing Sports|,||,||,||,||,||,||,||,||,||,||,|||-||SHOP-BY-TOP-MIATA-BRANDS-VOODOO|,|SHOP-BY-TOP-MIATA-BRANDS|,|VOODOO|,||,||,||,||,||,||,||,||,||,||,|||-||ORVOBRGRBLTE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Brake Grip - Black Textured 1990-2005|,|VOD-VG-03|,|99.95|,|78.02|,||,||,|0.000 |,||,||,||,|Our popular replacement brake grip for all 1st & 2nd generation (NA & NB) Miatas, but in a new finish, Textured Black.
Designed to match the Textured Black Voodoo Competition shift knob.
Supplied with an Allen key wrench to tighten the set-screw.
|,|||-||VG-15|,|NAKNOBS|,|Voodoo Brake Grip - Pearl 1990-2005|,|VG-15|,|94.95|,|78.02|,||,||,||,||,||,||,|Voodoo Brake Grip - Pearl 1990-2005
Our popular replacement brake grip for all 1st & 2nd generation (NA & NB) Miatas, but in a new finish; Pearl. Designed to match the Pearl Voodoo Competition shift knob.
Does not fit NC or ND (2006+)
|,|||-||ORVOBRGRPIBL|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Brake Grip - Piano Black 1990-2005|,|VOD-VG-20|,|99.95|,|78.02|,||,||,|0.000 |,||,||,||,|Our popular replacement brake grip for all 1st & 2nd generation (NA & NB) Miatas, but in a new finish, Piano Black.
Designed to match the Piano Black Voodoo Competition shift knob.
Supplied with an Allen key wrench to tighten the set-screw.
|,|||-||MIVOGRPO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Brake Grip - Polished 1990-2005|,|VOD-VG-02|,|109.95|,|88.02|,||,||,|0.000 |,||,||,||,|Voodoo Brake Grip - Polished 1990-2005
Back by popular demand the original Voodoo Brake Grip. Machined from solid 6061 T6 aircraft grade aluminum, and polished to a bright finish. Supplied with an Allen key wrench to tighten the set-screw.
Fits all NA & NB Miatas (1990-2005)
NOTE: This part is Brake Grip Only, does NOT comes with Polished button, brake boot or any other part of the E-Brake.
|,|||-||VG-01|,|NAKNOBS|,|Voodoo Brake Grip - Spun 1990-2005|,|VG-01|,|95.95|,|78.02|,||,||,||,||,||,||,|Voodoo Grip, Miata, Spun
Our popular replacement brake grip for all 1st & 2nd generation (NA & NB) Miatas, but in a new finish; Spun. Designed to match the Spun Voodoo Competition shift knob.VG-01
Does not fit NC or ND (2006+)
|,|||-||VC058RS|,|MAZDA-MX-5-MIATA-BRAKES-ROTORS-PARTS-1990-1997|,|Voodoo Caliper Covers 1994-2000|,|VC058RS|,|269.85|,|220.01|,||,||,||,||,||,||,|Voodoo Caliper Covers 1997-2002
Set of 4 Voodoo Caliper Covers (front and back)
Red powder coated with Silver fill on engraving.
Fits first generation (NA) from 1994 thru 1997 with 15" wheels & 2nd gen (NB) Base Model Miatas (15" wheels) from 1999 thru 2002.
|,|"Select Color" "Select Here" "Red powder coat, Silver fill" "Red powder coat, Black fill" "Satin powder coat, Black fill" "Black powder coat, Silver fill"|-||-|||-||VC052RS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-1999-2005|,|Voodoo Caliper Covers 2001-2005|,|vc052rs|,|289.85|,|235.00|,||,||,||,||,||,||,|Voodoo Caliper Covers 2001-2005
Set of 4 Caliper Covers (front and back) for NB Miatas. Red powder coated with Silver fill on engraving.
Note: Must have 16 inch or larger wheels.
|,|"Select Color" "Select Here" "Red powder coat, Silver fill" "Red powder coat, Black fill" "Yellow powder coat, Black fill add(+$10)" "Satin powder coat, Black fill" "Black powder coat, Silver fill"|-||-|||-||VC057RS|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Voodoo Caliper Covers 2006-2021|,|vc057rs|,|299.85|,|239.05|,||,||,||,||,||,||,|Voodoo Caliper Covers 2006-2021
Set of 4 Voodoo Caliper Covers (front and back) for NC & ND Miatas. Red powder coated with Silver fill on engraving.
|,|"Select Color" " Select Here" "Yellow powder coat, Black fill add(+$49)" "Black powder coat, Silver fill" "Satin powder coat, Black fill" "Red powder coat, Black fill" "Red powder coat, Silver fill"|-||-|||-||VOKNMASPTIMI|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Knob, Magnum, Spun - Titanium, Miata|,|600-108|,|25,500.00|,|204.05|,||,||,|0.000 |,||,||,||,|All of our Voodoo competition shift knobs are machined from solid 6061-T6 Aluminum, EXCEPT this one. This Voodoo knob is machined from solid Titanium!
Almost twice the weight of the aluminum knob, and a slightly darker color, this Voodoo knob is designed for the individual who really wants to be different. Or who just enjoys the solid feel of a heavier shift knob.
Aluminum (on the left) @ 5.2 oz (175 grams)
Titanium (on the right) @ 9.3 oz (284 grams)
These are available in very limited quantities. Contact us for availability.
*Thread 10 x 1.25 mm
|,|||-||VOSHKNBLTE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Shift Knob - Black Textured|,|600-103|,|75.00|,|59.95|,||,||,|0.000 |,||,||,||,|
The magnum Voodoo knob is a 2 inch sphere of solid aluminum, with a black crinkle textured powder-coated finish It's specially drilled mounting hole provides a quick & easy short-shift conversion, and it feels great in your hand. Requires NO set screws for a tight and rattle-free fit! A must for every sportscar enthusiast!
*Thread 10 x 1.25 mm
|,|||-||VOSHKNPE|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Shift Knob - Pearl|,|600-105|,|86.00|,|59.95|,||,||,|0.000 |,||,||,||,|
The magnum Voodoo knob is a 2 inch sphere of solid aluminum, spun finished, then clear powdercoated to produce our pearl finish. It's specially drilled mounting hole provides a quick & easy short-shift conversion, and it feels great in your hand. Requires NO set screws for a tight and rattle-free fit! A must for every sportscar enthusiast!
*Thread 10 x 1.25 mm
|,|||-||VOSHKNPO|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Shift Knob - Polished|,|600-102|,|75.00|,|59.95|,||,||,|0.000 |,||,||,||,|
The magnum Voodoo knob is a 2 inch sphere of solid aluminum, polished to a high-brilliance. It's specially drilled mounting hole provides a quick & easy short-shift conversion, and feels great in your hand. Requires NO set screws for a tight rattle-free feel. A must for every sportscar enthusiast.
*Thread 10 x 1.25 mm
|,|||-||VOSHKNSMPIBL|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Shift Knob - Smooth Piano Black|,|600-104|,|75.00|,|59.95|,||,||,|0.000 |,||,||,||,|
The magnum Voodoo knob is a 2 inch sphere of solid aluminum, with a black smooth finish. It's specially drilled mounting hole provides a quick & easy short-shift conversion, and feels great in you hand. A must for every sports car enthusiast.
*Thread 10 x 1.25 mm
|,|||-||VOSHKNSP|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Voodoo Shift Knob - Spun|,|600-101|,|75.00|,|59.95|,||,||,|0.000 |,||,||,||,|
Now available, our popular Voodoo shift knobs in Spun finish. A great match with brushed aluminum dash panels. Magnum size (2" diameter with neck).
It's specially drilled mounting hole provides a quick & easy short-shift conversion, and feels great in your hand. Requires NO set screws for a tight rattle-free feel. A must for every sportscar enthusiast.
*Thread 10 x 1.25 mm
|,|||-||CUSTOMERSCARS|,||,|Welcome to the Owner's Showcase!|,||,||,||,||,||,||,||,|oijoij|,||,|
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-WET-OKOLE|,|SHOP-BY-TOP-MIATA-BRANDS|,|Wet Okole|,||,||,||,||,||,||,||,||,||,||,|||-||WETOKHAMI|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Wet Okole Hawaii Mirazyme|,|405-463|,|29.99|,|17.95|,||,||,|0.000 |,||,||,||,|MiraZyme Odor Eliminator
Mirazyme is a highly concentrated 100% natural and 100% biodegradable microbial odor eliminator. Mirazyme penetrates the thin layer of nylon on our seat covers and eliminates any odors that may have occurred while in use. Mirazyme along with wet suit shampoo and UV Protectant will increase the life expectancy of your seat covers.
|,|||-||WETOKSECOCAK|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Wet Okole Seat Cover Care Kit|,|405-460|,|58.97|,|47.02|,||,||,|0.000 |,||,||,||,|Wet Okole Hawaii Wet Suit Shampoo
Highly concentrated seat cover shampoo cleans and conditions all neoprene products. Regular cleaning leaves your seat covers free of organic residue and salt deposits. The conditioning agents help prevent premature aging and oxidation while maintaining your colors. Wet suit shampoo along with UV Protectant and Mirazyme will increase the life expectancy of your seat covers.
Wet Okole Hawaii Seat Cover UV Protectant
Conditions,seals and protects Wet Okole Hawaii seat covers. Reduces damage and fading from the sun. Replaces lost plasticizers, protects for easy cleaning with wet suit shampoo and improves appearance by enhancing color. UV Protectant along with wet suit shampoo and Mirazyme will increase the life expectancy of your seat covers.
MiraZyme Odor Eliminator
Mirazyme is a highly concentrated 100% natural and 100% biodegradable microbial odor eliminator. Mirazyme penetrates the thin layer of nylon on our seat covers and eliminates any odors that may have occurred while in use. Mirazyme along with wet suit shampoo and UV Protectant will increase the life expectancy of your seat covers.
|,|||-||WETOKSESH|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Wet Okole Seat Shampoo|,|405-461|,|20.99|,|17.95|,||,||,|0.000 |,||,||,||,|Wet Okole Hawaii Wet Suit Shampoo
Highly concentrated seat
cover shampoo cleans and conditions all neoprene products. Regular
cleaning leaves your Miata seat covers free of organic residue and
salt deposits. The conditioning agents help prevent premature
aging and oxidation while maintaining your colors. Wet suit
shampoo along with UV Protectant and Mirazyme will increase
the life expectancy of your seat covers.
|,|||-||ORWETOKSW|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-1990-1997|,|Wet Okole Swatches - FREE SHIPPING|,|Order-Wet-Okole-Swatches|,|9.99|,|7.95|,||,||,|0.000 |,||,||,||,|Interested in a set of Mazda Miata Custom Wet Okole Hawaii Seat Covers, but want to make sure you get the right color combinations?
Select up to THREE(3) colors, be sure to add which colors in the comment section when placing order.
Only $7.95 including shipping - which will be applied to your total when you purchase the seats!
DYE LOTS CAN CHANGE - THE COLOR WE SEND YOU MAY BE SLIGHLY DIFFERENT THAN THE ACTUAL SEAT COVER
|,|||-||WETOKUVPR|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Wet Okole UV Protectant|,|405-462|,|29.99|,|17.95|,||,||,|0.000 |,||,||,||,|Wet Okole Hawaii Seat Cover UV Protectant Conditions, seals and protects Wet Okole Hawaii seat covers. Reduces damage and fading from the sun. Replaces lost plasticizers, protects for easy cleaning with wet suit shampoo and improves appearance by enhancing color. UV Protectant along with wet suit shampoo and Mirazyme will increase the life expectancy of your seat covers.
|,|||-||WE|,|MAMIWETOKHAC|,|wetokolecolorswatches.jpg|,||,||,||,||,||,||,||,||,||,|
|,|||-||WHATISRAINRA2|,||,|What is a Rain Rail and Do I Need One?|,||,||,||,||,||,||,||,||,||,||,|||-||WHATISRAINRA3|,||,|What is a Rain Rail and Do I Need One?|,||,||,||,||,||,||,||,||,||,||,|||-||WHATISRAINRA|,||,|What is a Rain Rail and Do I Need One?|,||,||,||,||,||,||,||,||,||,||,|||-||WHATISRAINRA1|,||,|What is a Rain Rail and Do I Need One?|,||,||,||,||,||,||,||,||,||,||,|||-||WHATISRAINRAIL|,|SOFT-TOP|,|What Is A Rain Rail?|,||,||,||,||,||,||,||,||,||,|
What Is A Rain Rail?
The rain rail is a plastic "rain gutter" type piece that every Miata already has. It is located behind the top (you can't see it until you remove the top) and funnels the water that runs down between the top and the body of the car to drainage holes. If this piece is cracked or brittle, serious water damage can occur in your Miata.
|,|||-||WHEELADAPTER|,|MAOEMWHAC|,|Wheel Adapters Set of 4, 4x100 to 5x114.3, 0.79" Inch|,|wheeladapter|,|585.99|,|499.02|,||,||,||,||,||,||,|Wheel Adapters Set of 4, 4x100 to 5x114.3, 0.79" Inch
Specifications:
Car PCD: 4x100
Car Hub size: 54.1mm
Wheel PCD: 5x114.3
Wheel centre bore: 60.1mm
Mounting nut thread size: M12x1.5 (included)
Adapter stud thread size: M12x1.5
Thickness: 27mm
|,|||-||WHEELSTUDS|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Wheel Studs and Lug Nuts|,|WHEEL-STUDS|,|119.99|,|108.02|,||,||,|0.000 |,||,||,||,|Racing Wheel Studs and Lug Nuts
Complete set of (16) 7/16" heat treated (8470 Chrome Molly) press in wheel studs and lug nuts. The wheel studs are 3.5" in length and have knurled ends to make putting the lug nuts on easy and eliminate the potential for cross threading. These studs are designed for racing application and have a tensile strength of 190,000 psi.
These wheel studs are ideal for running wheel spacers. Why run wheel spacers? Because Mazda built the Miata with a wider rear track than front track so that it would under steer which is safer for the general public. Running wheel spacers will allow you to square up the car and have a better starting point than stock. The GCR now allows for different sized spacers from the front to the rear as long as they are the same size on each axle.
The lug nuts have a 60 degree taper and are zinc plated so there is no chrome to flake off after time.
These studs may require that you slightly oversize drill the stock Miata hub up to 9/16" to allow the larger studs to be pressed into place.
These press fit set of studs and nuts that may require drilling.
|,|||-||SK-016W|,|20MAMIINKN|,|White Shift Knob - 4 interchangeable rings - Universal|,|SK-016W|,|52.99|,|48.99|,||,||,|0.000 |,||,||,||,|White Shift Knob - 4 interchangeable rings - Universal
This product improves the overall look of the interior of the vehicle while providing some performance gain. Different shapes of the knob are ergonomically correct depending on shifting style. Weighted aluminum construction improves shifting by increasing inertial weight in order to allow shifter to more smoothly and quickly engage into the gear box.
|,|||-||WHYSHOPHERE|,||,|WHY SHOP AT GO MIATA?|,|whyshophere|,||,||,||,||,||,||,|dga|,||,|
Click here to see our 5 STAR CUSTOMER RATINGS!
We at Go Miata believe the Miata is a very special car, and Miata owners are a very special community of people. We are here for YOU and want to make your shopping experience as great as it can possibly be.
So why should you shop at Go Miata?
1. Because we are Miata enthusiasts ourselves and you can be assured that every product available on our website is something we personally selected to carry.We believe that quality products and service is a major factor in being able to enjoy your Miata.
2. We are a 5-STAR Top Rated Yahoo! Store. Which means our customers have rated us with the highest customer service ratings. Click here to see our Customer Testimonials.
3. All orders on Go Miata are completely safe and secure. We use the top industry-standard, 128 bit SSL encryption to protect both your credit card order and personal information. We also have HACKER SAFE which also helps protect you from identity theft and credit fraud. GoMiata.com is tested and certified daily by HACKER SAFE. Go Miata is audited daily for network vulnerabilities by HACKER SAFE.
HACKER SAFE Helps prevent 99% of hacker crime. And we never sell or share any of your personal information with any other companies.
4. We offer a toll-free number, not just for orders but for customer service as well. You will NEVER need to deal with endless phone menus.
5. Unlike some stores that don't even read customer emails, we not only read them, but actually respond! Due to the quantity of emails we receive, please allow up to 48 hours for our response. For quicker service, give us a call! 1-619-466-4282. You can be assured that as our customer, we are only a phone call or email away to assist you with any questions you may have.
www.GoMiata.com
|,|||-||WHYZYMOL|,|SHOP-BY-TOP-MIATA-BRANDS-ZYMOL|,|Why Zymol?|,||,||,||,||,||,||,||,||,||,|
Why Zymol?
Zymol products are safe for all paint finishes, including clear-coats, acrylic, urethane and classic lacquers. Zymol Hand-Crafted waxes have a Carnauba content of 37 to 61% by volume – 5 to 10 times the industry standard. Zymol only use Brazilian No. 1 Yellow and the rarer No. 1 White Carnauba, the highest grade available. This gives greater protection and increased depth of shine compared to other car care products.
Zymol waxes are an enzyme mixture until applied to your car. With air acting as a catalyst, this becomes a ‘wax’ and starts bonding to your cars surface. It is very easy to apply and will never leave any white residue or build up along seams and crevices.
Follow three simple steps to a perfect zymol finish:
WASHING - removing loose dirt and road film that sits on top of the paint is the first critical step you must do to protect your car's Paint.
CLEANING - removing dead and oxidised paint and foreign matter like tar, road silt and acid rain deposits that cannot be removed by washing alone. This second step will renew your original paint lustre and have you ready for the final most critical step.
FEEDING - providing essential oils and restoring the finish with a high gloss durable protective layer. With a true unique formulation, Zymol is designed to protect your car while producing an ultra-brilliant sheen!
Simple answer: "Only the best for your Miata!"
|,|||-||13-1081ND|,|MAZDA-MX-5-MIATA-BRAKES-AND-ROTORS-PARTS-AND-ACCESSORIES-2016|,|Wilwood Brake Fluid 2016-2019|,|13-1081ND|,|19.05|,|15.40|,||,||,||,||,||,||,|Wilwood Brake Fluid 2016-2019
Wilwood 570 Degree Brake Fluid,Wilwood's specially formulated Hi-Temp_ 570 Racing Brake Fluid has a minimum 570_ F dry bOiling point to withstand the severe heat requirements of automotive racing. Hi-Temp_ 570's low viscosity allows easy bleeding of your brake system, eliminating aeration.
*** Product images may differ from actual product appearance ***
|,|||-||WILWOODBRAKES|,|SHOP-BY-TOP-MIATA-BRANDS|,|Wilwood Brakes|,||,||,||,||,||,||,||,||,||,||,|||-||904-165|,|NBINSTBA|,|Wind Blocker for Style Bar 1990-2005|,|904-165|,|124.99|,|98.95|,||,||,||,||,||,||,|Wind Blocker for Style Bar 1990-2005
Windblocker made for Style Bars by Cobalt.
|,|||-||WIFRASQU|,||,|Windblocker Frequently Asked Questions|,|wifrasqu|,||,||,||,||,||,||,||,||,|
Question: Will the Windstop fit any year Miata?
Answer: Yes, the Windstop will fit any year Miata.
Question: Do I have to drill any holes in my car to mount the Windstop? How does it attach
Answer: No. The included Windstop mounting bracket uses existing holes. No drilling is required.
The lower bolt is the tenax snap for the boot. The top bolt hole is already there, courtesy of Mazda. No drilling is required, Just remove the plastic cap and thread in the supplied 13mm bolt.
Question: How can I tell if the Windstop will fit with my rollbar?
Answer: The easiest way to tell if the Windstop will fit with your rollbar is a quick visual check.
Put the top down (which is how it should always be anyway). Move one of the seats forward so you can get a good look at the seatbelt anchor.
If you can see the two mounting points then you will be able to install the Windstop without a problem.
Question: My Miata has a stiffener bar behind the seats, will the Windstop fit ok?
Answer: The Windstop will fit 94-97 Miata's with the stiffener bar.
The Windstops mounting brackets protrude just behind the bar.
Question: My Windstop moves slightly forward after I've driven my car. I'd like it to stay at a 90 degrees.
Answer: Slightly tighten the captive nut on the hinge. You'll need a 3/16" Allen wrench and a 13mm open end wrench or socket to do this. Remove the Windstop and put it on a table so you don't risk scratching your car.
Question: I'm getting a '99+ Miata that has the factory Windblocker and would like to use the Windstop in it's place. Can I safely remove the factory Windblocker?
Answer: The factory Windblocker can be removed and the Windstop can be installed in it's place.
Question:Can I use a Windstop if my car has a glass back window?
Answer: Yes, you can raise and lower the top with the Windstop in place.
Question: Can I unzip the plastic back window with the Windstop in place?
Answer: Yes. The window will lay flat under the Windstop like normal.
Question: Can I use a Windstop with a Hard Dog roll bar?
Answer: No. The Windstop won't fit because the 4 point roll bar. This would be the case with all 4 point roll bars.
Question: I can't snap the lower bar to the carpet and the fabric is stretched too tight. What's the problem, you guys said it would fit?
Answer: You have the Windstop in backwards or have the mounting brackets upside down.
The Windstop should be mounted with the flush side toward the back of the car.
Question: Does the Windstop come in any other colors?
Answer: Yes, as long as you like black.
|,|||-||KN-AEM-30-0300|,|MAZDA-MX-5-MIATA-PERFORMANCE-PARTS-AND-ACCESSORIES-2016|,|X-Series Wideband AFR Sensor and Controller Gauge by AEM|,|kn-aem-30-0300|,|299.99|,|188.50|,||,||,||,||,||,||,|X-Series Wideband AFR Sensor and Controller Gauge by AEM
AEM X-Series Wideband UEGO (Universal Exhaust Gas Oxygen) Air/Fuel Ratio Sensor Controller Gauges are built upon unique, patented 100% Digital technology that makes them the fastest responding wideband air/fuel ratio controllers in independent testing. This is a powerful tuning tool to accurately monitor the Air/Fuel Ratio of your engine. Running rich can cause a loss in power, while running lean can seriously damage your engine. Using a Wideband AFR controller during tuning on a dyno allows you to monitor your AFR and adjust tuning parameters appropriately.
This gauge is 52mm in diameter with the controller integrated into the gauge, which is less than 7/8ths of an inch thick. This slim design allows for many different mounting options. The LEDs are auto-dimming. The display is user-configurable via buttons on the gauge face that allow you to change AFR values for different fuels (gas: 8.0:1 to 20:1), Lambda or O2%, change from 3 to 4 digits for the display, perform a free-air calibration, and change the CAN message ID. It can output a CAN signal or 0-5V for your ECU.
Kit includes: Wideband oxygen sensor, electronics, wiring, and a bung to be welded to your exhaust.
|,|||-||XXRWHEEL002|,||,|XXR 002|,||,||,||,||,||,||,||,||,||,||,|||-||XXRWHEELS513|,||,|XXR 513|,||,||,||,||,||,||,||,||,||,||,|||-||XXRWHEELS518|,||,|XXR 518|,||,||,||,||,||,||,||,||,||,||,|||-||XXR-527D|,|NEW|,|XXR 521 Wheels 17x7|,|XXR-521|,|215.00|,|195.02|,||,||,||,||,||,||,|XXR 521 Wheels 17x7
Offset - 38mm
Step lip design with clean cut mesh spoke.
Removable aluminum rivets available in Chrome, Red, Blue, Flat Black and Gloss Black. (24k Gold available in plastic)
LOWER offset and more WIDTH for XXTREME Staggered fitment.
Exclusive colors and unique bolt patterns available through select XXR dealers.
|,|"Select Color" "Select Here" "F-BLACK/CHROME RIVETS" "BLACK/ML/CHROME RIVETS" "BLACK/GOLD RIVETS"|-||-|"Select Lugs" "Select Here" "4-100" "5-100"|-||-|"Shipping cost" "add (+$45)"|-||-|||-||XXRWHEELS522|,||,|XXR 522|,||,||,||,||,||,||,||,||,||,||,|||-||XXR-522-GOLD-16|,||,|XXR 522 Wheels 16x7 +25|,|52267087|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 522 Wheels 16x7 +25
Gold
Size
*16" x 7"
* +25 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-522-CHROME-BLACK-16|,||,|XXR 522 Wheels 16x7 +25|,|52267082C|,|169.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 522 Wheels 16x7 +25
Chromium Black
Size
*16" x 7"
* +25 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-522-FLAT-BLACK-16|,||,|XXR 522 Wheels 16x7 +25|,|52267082|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 522 Wheels 16x7 +25
Size
*16" x 7"
* +25 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-526|,|NEW|,|XXR 526 Wheels |,|XXR-526|,|289.00|,|249.02|,||,||,||,||,||,||,|XXR 526 Wheels
17 x 10 has only 20mm
|,|"Select Color" "Black / SSC" "Chromium Black / SSC"|-||-|"Select Size" "Select Here" "17 x 9" "17 x 10 add(+$20)"|-||-|"Select Offset" "Select Here" "35mm" "25mm"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-527-FLAT-BLACK-15|,|XXRWHEELS|,|XXR 527 Wheels |,|xxr-527|,|229.00|,|166.02|,||,||,|0.000 |,||,||,||,|XXR Wheels 527
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Gold, Matte Black, Chromium Black, Wasabi, and Habanero.
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "15 X 8.25" "16 X 8.25 add(+$45)" "17 X 9.75, 25 offset add(+$55)"|-||-|"Select color" "Gold" "Matte Black" "Chromium Black"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-527-CHROME-BLACK-15|,||,|XXR 527 Wheels 15x8 +0|,|52758082N|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 15x8 +0
Chromium Black
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-527-WASABI-15|,||,|XXR 527 Wheels 15x8 +0|,|52758084GN|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 15x8 +0
Wasabi Green
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-527-HABANERO-15|,||,|XXR 527 Wheels 15x8 +0|,|52758084OR|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 15x8 +0
Habanero
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-527-GOLD-15|,||,|XXR 527 Wheels 15x8 +0|,|52758087|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 15x8 +0
Gold
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-527-GOLD-16|,||,|XXR 527 Wheels 16x8 +0|,|52768087|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 16x8 +0
Gold
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-527-CHROME-BLACK-16|,||,|XXR 527 Wheels 16x8 +0|,|52768082N|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 16x8 +0
Chromium Black
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-527-WASABI-16|,||,|XXR 527 Wheels 16x8 +0|,|52768084GN|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 16x8 +0
Wasabi Green
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-527-FLAT-BLACK-16|,||,|XXR 527 Wheels 16x8 +0|,|52768082|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 16x8 +0
Flat Black
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-527-HABANERO-16|,||,|XXR 527 Wheels 16x8 +0|,|52768084OR|,|149.99|,|109.95|,||,||,|0.000 |,||,||,||,|XXR 527 Wheels 16x8 +0
Habanero
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-528|,||,|XXR 528 Wheels 16X7 - Machined / Silver|,|52867493|,|149.99|,|65.85|,||,||,||,||,||,||,|XXR 528 Wheels 16x7 +38
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 7"
* +38 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping cost" "add(+29.99)"|-||-|||-||XXR-530-FLAT-BLACK-16|,|XXRWHEELS|,|XXR 530 Wheels |,|xxr-530|,|219.00|,|185.02|,||,||,|0.000 |,||,||,||,|XXR Wheels 530
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Black/ML, Silver/ML, Red/ML, Flat Black, and Flat Black with Bronze Lip.
* Available in Gold, Matte Black and Chromium Black.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select color" "Select Here" "Gold" "Flat Black" "Chromium Black"|-||-|"Select size" "Select Here" "15 x 8 - 20 offset" "15 X 8.25 - 0 offset" "16 x 8 - 20 offset add(+$40)" "16 X 8.25 - 0 offset add(+$45)"|-||-|"Select bolt pattern" "Select Here" "4 x 100"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-530-FLAT-BLACK-16-0|,||,|XXR 530 Wheels 16x8 +0|,|53068462|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 530 Wheels 16x8 +0
Flat Black
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-530-CHROME-BLACK-16-0|,||,|XXR 530 Wheels 16x8 +0|,|53068462N|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 530 Wheels 16x8 +0
Chromium Black
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-530-GOLD-16-0|,||,|XXR 530 Wheels 16x8 +0|,|53068467|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 530 Wheels 16x8 +0
Gold
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-530-GOLD-16|,||,|XXR 530 Wheels 16x8 +20|,|53068087|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 530 Wheels 16x8 +20
Gold
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-530-CHROME-BLACK-16|,||,|XXR 530 Wheels 16x8 +20|,|53068082N|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 530 Wheels 16x8 +20
Chromium Black
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-PLATINUM-15|,|XXRWHEELS|,|XXR 531 Wheels |,|xxr-531|,|179.00|,|159.02|,||,||,|0.000 |,||,||,||,|XXR Wheels 531
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Black/ML, Silver/ML, Red/ML, Flat Black, and Flat Black with Bronze Lip.
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "15 x 8" "16 x 8 add(+$45)"|-||-|"Select color" "Silver/ML" "Chromium/ML" "Platinum add(+$75)"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3"|-||-|"Select offset" "+ 0" "+ 20"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-531-SILVER-15|,||,|XXR 531 Wheels 15x8 +0|,|53158463|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 15x8 +0
Hyper Silver with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-BLACK-ML-15|,||,|XXR 531 Wheels 15x8 +0|,|53158462|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 15x8 +0
Black with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-CHROMIUM-BLACK-ML-15|,||,|XXR 531 Wheels 15x8 +0|,|53158462N|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 15x8 +0
Chromium Black with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-BLACK-PLATINUM-15|,||,|XXR 531 Wheels 15x8 +0|,|53158460BK|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 15x8 +0
Black Platinum
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-CHROME-BLACK-ML-15|,||,|XXR 531 Wheels 15x8 +20|,|53158082N|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 15x8 +20
Chromium Black with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-BLACK-ML-151|,||,|XXR 531 Wheels 15x8 +20|,|53158082|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 15x8 +20
Black with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-BLACK-PLAT-15-0|,||,|XXR 531 Wheels 15x8 +20|,|53158080BK|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 15x8 +20
Black Platinum
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-HYPER-SILVER-15|,||,|XXR 531 Wheels 15x8 +20|,|53158083|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 15x8 +20
Hyper Silver with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-CHROM-BLACK-ML-16|,||,|XXR 531 Wheels 16x8 +0|,|53168462N|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +0
Chromium Black with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-BLACK-PLAT-16|,||,|XXR 531 Wheels 16x8 +0|,|53168460BK|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +0
Black Platinum
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-PLATINUM-16|,||,|XXR 531 Wheels 16x8 +0|,|53168460|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +0
Platinum
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-BLACK-ML-16|,||,|XXR 531 Wheels 16x8 +0|,|53168462|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +0
Black with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-HYPER-SILVER-ML-16|,||,|XXR 531 Wheels 16x8 +0|,|53168463|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +0
Hyper Silver with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +0 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-PLATINUM-16-20|,||,|XXR 531 Wheels 16x8 +20|,|53168080|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +20
Platinum
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-PLATINUM-BLACK-16|,||,|XXR 531 Wheels 16x8 +20|,|53168080BK|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +20
Black Platinum
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-SILVER-ML-16|,||,|XXR 531 Wheels 16x8 +20|,|53168083|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +20
Hyper Silver with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-CHROME-BLACK-ML-16|,||,|XXR 531 Wheels 16x8 +20|,|53168082N|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +20
Chromium Black with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-531-BLACK-ML-161|,||,|XXR 531 Wheels 16x8 +20|,|53168082|,|159.99|,|129.95|,||,||,|0.000 |,||,||,||,|XXR 531 Wheels 16x8 +20
Black with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*16" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-533-SILVER-16|,|XXRWHEELS|,|XXR 533 Wheels Machined|,|xxr-533|,|249.00|,|198.02|,||,||,|0.000 |,||,||,||,|XXR Wheels 533
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Black/ML, Silver/ML, Red/ML, Flat Black, and Flat Black with Bronze Lip.
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "14 X 6" "15 X 6.5 add(+$45)" "16 X 7 add(+$65)"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3" "5 x 100" "5 x 114.3" "5 x 112" "5 x 115"|-||-|"Select offset" "+ 35" "+ 38"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-535-BLACK-16|,||,|XXR 535 Wheels 16x8 +20|,|53568082|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 535 Wheels 16x8 +20
Flat Black
Size
*16" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|||-||XXR-536-SILVER-ML-15|,|XXRWHEELS|,|XXR 536 Wheels |,|xxr-536|,|189.00|,|159.02|,||,||,|0.000 |,||,||,||,|XXR Wheels 536
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Silver/ML, Gold/ML,and Platinum finish. .
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "15 x 8" "16 x 8 add(+$55)"|-||-|"Select color" "Hyper Silver/ML" "Hyper Gold/ML" "Black / Gold Rivets"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3"|-||-|"Select offset" "+ 0" "+ 20"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-536-GOLD-ML-15|,||,|XXR 536 Wheels 15x8|,|53658467-53658087|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR 536 Wheels 15x8
Gold with Machined Lip
This is an aggressive fitment for Miatas
Fender rolling may be required
Size
*15" x 8"
* +0 offset or +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping Cost" "add(+$29.99)"|-||-|"Option" "+0mm" "+20mm"|-||-|||-||XXR-550|,|XXRWHEELS|,|XXR 550 Wheels |,|xxr-550|,|249.00|,|209.02|,||,||,||,||,||,||,|XXR Wheels 550
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Platinum, Flat Black and Chromium Black.
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "15 x 8" "16 x 8 add(+$45)" "16 X 8.25 add(+$55)"|-||-|"Select color" "Flat Black" "Chromium Black"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3"|-||-|"Select offset" "+ 2" "+ 21"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-551|,|XXRWHEELS|,|XXR 551 Wheels |,|xxr-551|,|259.00|,|209.02|,||,||,||,||,||,||,|XXR Wheels 551
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Gold, Flat Black and Chromium Black.
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "15 x 8" "16 x 8 add(+$45)" "16 x 8.25 add(+$45)"|-||-|"Select color" "Gold" "Flat Black" "Chromium Black"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3"|-||-|"Select offset" "+ 2" "+ 21"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-553|,|XXRWHEELS|,|XXR 553 Wheels |,|xxr-553|,|228.00|,|192.02|,||,||,||,||,||,||,|XXR Wheels 553
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Platinum, Flat Black and Chromium Black.
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "15 x 8" "16 x 8.25 add(+$45)"|-||-|"Select color" "Flat Black" "Chromium Black"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3"|-||-|"Select offset" "+ 2" "+ 21"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-555|,|NEW|,|XXR 555 Wheels 17x8|,|XXR-555|,|235.00|,|209.02|,||,||,||,||,||,||,|XXR 555 Wheels 17x8
Bolt Pattern: 5-100
Offset - 35mm
|,|"Select Color" "Select Here" "Flat Black" "Chromium Black / ML"|-||-|"Shipping cost" "add(+$49)"|-||-|||-||XXR-557|,|XXRWHEELS|,|XXR 557 Wheels |,|xxr-557|,|279.00|,|219.02|,||,||,||,||,||,||,|XXR Wheels 557
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Black Milled ML, Black and Milled, and Flat Black and Bronze.
* Available in 15” in low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "15 x 7" "15 x 8"|-||-|"Select color" "Black Milled ML" "Black and Milled" "Flat Black and Bronze"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3"|-||-|"Select offset" "+ 0" "+ 15" "+ 20"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXR-558|,||,|XXR 558 Wheels |,|xxr-558|,|125.95|,|92.85|,||,||,||,||,||,||,|XXR Wheels 558
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Flat Black, Chromium Black, and Gold.
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "15 x 8" "16 x 8 add(+$10)"|-||-|"Select color" "Flat Black" "Chromium Black" "Gold"|-||-|"Select bolt pattern" "4 x 100" "4 X 114.3"|-||-|"Select offset" "+ 20"|-||-|"Shipping cost" "add(+$29.95)"|-||-|||-||XXR-772|,|XXRWHEELS|,|XXR 772 Wheels Machined|,|xxr-772|,|209.00|,|152.02|,||,||,||,||,||,||,|XXR 772 Wheels Machined
Bolt Pattern: 4-100
Offset:
14x6, 16x7 - 38mm
15x6.5 - 35mm
|,|"Select Size" "Select Here" "14x6" "15x6.5 add(+$45)" "16x7 add(+$55)"|-||-|"Shipping & Handling" "add(+$45)"|-||-|||-||XXRWHEELS|,|MAZDA-MX-5-MIATA-WHEELS-TIRES-PARTS-2016|,|XXR Wheels|,||,||,||,||,||,||,||,||,||,||,|||-||XXRWHEELS002|,||,|XXR Wheels 002 15x7 +38 1.5" Lip |,|XXR-00257082|,|107.50|,|80.25|,||,||,|5.000 |,||,||,||,|XXR Wheels 002 15x7 +38 1.5" Lip
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
Size:
* 15" x 7"
* +38 offset
* 4 x 100 lug pattern
* 1.5" Staggered Lip
* Hub-Centric Rings Included
* Price is per wheel *
|,|"Select Finish" "Black" "Hyper Silver" "Red" "Gunmetal"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH0021503|,||,|XXR Wheels 002 15x8 +0 3.5" Lip |,|XXR-00258083|,|114.00|,|85.00|,||,||,|5.000 |,||,||,||,|XXR Wheels 002 15x8 +0 3.5" Lip
ALL Other Colors Discontinued, Only Red Available
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicles.
Size:
* 15" x 8"
* +0 offset
* 4 x 100 lug pattern
* 3" Staggered Lip
* Price is per wheel *
|,|"Select Finish" "Red"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH0021638|,||,|XXR Wheels 002 16x7 +38 1.5" Lip |,|XXR-00267082|,|127.50|,|94.82|,||,||,|5.000 |,||,||,||,|XXR Wheels 002 16x7 +38 1.5" Lip
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
Size:
* 16" x 7"
* +38 offset
* 4 x 100 lug pattern
* 1.5" Staggered Lip
* Hub-Centric Rings Included
* Price is per wheel *
|,|"Select Finish" "Black" "Hyper Silver" "Red" "Gunmetal"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH0021603|,|XXRWHEEL002|,|XXR Wheels 002 16x8 +0 3.5" Lip |,|XXR-00268082|,|134.00|,|84.95|,||,||,|5.000 |,||,||,||,|XXR Wheels 002 16x8 +0 3.5" Lip
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
Size:
* 16" x 8"
* +0 offset
* 4 x 100 lug pattern, and 4 X 114.3 lug pattern
* 3.5" Staggered Lip
* Hub-Centric Rings Included
* Price is per wheel *
|,|"Select Finish" "Black"|-||-|"Select Bolt Pattern" "4 x 100" "4 X 114.3"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXR-002-5|,|XXRWHEELS|,|XXR Wheels 002.5 - Sale!|,|xxr-002-5|,|187.00|,|163.02|,||,||,||,||,||,||,|XXR Wheels 002.5
We are sorry, 16X8 Hyper Silver, 0 offset - Out of Stock
Features:
* Technologically designed with a retro flavor to fit new wave tuner and old school cars.
* Special design cap to fit the earlier import vehicle.
* Available in Black/ML, Silver/ML, Red/ML, Flat Black, and Flat Black with Bronze Lip.
* Available in 15” and 16” sizes in both low and mid offsets.
* Super low profile genuine billet aluminum emblem.
* Price is per wheel *
|,|"Select size" "Select Here" "15 x 8" "16 x 8 add(+$35)"|-||-|"Select color" "Select Here" "Hyper Silver / ML" "Black / ML" "Flat Black / Bronze Lip" "Flat Black"|-||-|"Select bolt pattern" "Select Here" "4 x 100" "4 X 114.3"|-||-|"Select offset" "Select Here" "+ 0" "+ 20"|-||-|"Shipping cost" "add(+$45)"|-||-|||-||XXRWH5131515|,|XXRWHEELS513|,|XXR Wheels 513 15x7 +15 2.25" Lip|,|XXR-51357089|,|113.00|,|84.50|,||,||,|5.000 |,||,||,||,|
Features:
* Popular throw back banana spoke design.
* Deeply profound smooth machined lip.
* Symmetrical lug pattern matches number of spokes.
* Hub-Centric Rings Included
* Available in Hyper Silver, Gun Metal, Red, Black and Flat Black/Red.
* Low profile chromed center cap
Size:
* 15" x 7"
* +15 offset
* 4 x 100 lug pattern
* 2.25" Staggered Lip
* Price is per wheel *
|,|"Select Color" "Gunmetal" "Black" "Hyper Silver" "Red" "Black/Red"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5131503|,|XXRWHEELS513|,|XXR Wheels 513 15x8 +0 3.5" Lip|,|XXR-51358089|,|117.00|,|87.00|,||,||,|5.000 |,||,||,||,|
Features:
* Popular throw back banana spoke design.
* Deeply profound smooth machined lip.
* Symmetrical lug pattern matches number of spokes.
* Hub-Centric Rings Included
* Available in Hyper Silver, Gun Metal, Red, Black and Flat Black/Red.
* Low profile chromed center cap
Size:
* 15" x 8"
* +0 offset
* 4 x 100 lug pattern
* 3.5" Staggered Lip
* Price is per wheel *
|,|"Select Color" "Gunmetal" "Black" "Hyper Silver" "Red" "Black/Red"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5131615|,|XXRWHEELS513|,|XXR Wheels 513 16x7 +15 2.25" Lip|,|XXR-51367089|,|135.50|,|100.50|,||,||,|5.000 |,||,||,||,|
Features:
* Popular throw back banana spoke design.
* Deeply profound smooth machined lip.
* Symmetrical lug pattern matches number of spokes.
* Hub-Centric Rings Included
* Available in Hyper Silver, Gun Metal, Red, Black and Flat Black/Red.
* Low profile chromed center cap
Size:
* 16" x 7"
* +15 offset
* 4 x 100 lug pattern
* 2.25" Staggered Lip
* Price is per wheel *
|,|"Select Color" "Gunmetal" "Black" "Hyper Silver" "Red" "Black/Red"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5131603|,|XXRWHEELS513|,|XXR Wheels 513 16x8 +0 3.5" Lip|,|XXR-51368089|,|139.00|,|101.50|,||,||,|5.000 |,||,||,||,|
Features:
* Popular throw back banana spoke design.
* Deeply profound smooth machined lip.
* Symmetrical lug pattern matches number of spokes.
* Available in Hyper Silver, Gun Metal, Red, Black and Flat Black/Red.
* Low profile chromed center cap
Size:
* 16" x 8"
* +0 offset
* 4 x 100 lug pattern
* 3.5" Staggered Lip
* Price is per wheel *
|,|"Select Color" "Gunmetal" "Black" "Hyper Silver" "Red" "Black/Red"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5181510|,|XXRWHEELS518|,|XXR Wheels 518 15x5.5 +40|,|XXR-51855497|,|110.00|,|75.95|,||,||,|5.000 |,||,||,||,|
Features:
* Light-weight rally design for peak performance.
* Competitive con-caved spoke line.
* Achieve the Flush Fitment Look with our specialized dual lip design.
Size:
* 15" x 5.5"
* +40 offset
* 4 x 100 lug pattern
* Price is per wheel *
This part is on back order status. Please call customer service for latest ETA on this XXR Wheels 518 15x5.5 +40.
|,|"Select Finish" "Flat Black"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5181540|,||,|XXR Wheels 518 16x5.5 +40|,|XXR-51866497|,|131.00|,|94.95|,||,||,|5.000 |,||,||,||,|
Features:
* Light-weight rally design for peak performance.
* Competitive con-caved spoke line.
* Achieve the Flush Fitment Look with our specialized dual lip design.
Size:
* 16" x 5.5"
* +40 offset
* 4 x 100 lug pattern
* Price is per wheel *
This part is on back order status. Please call customer service for latest ETA on this XXR Wheels 518 16x5.5 +40.
|,|"Select Finish" "Gold" "Flat-Black/Red Stripe" "Flat Black" "Black Machined"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5221525|,||,|XXR Wheels 522 15x7 +25 2" Lip |,|XXR-52257082|,|107.50|,|89.95|,||,||,|5.000 |,||,||,||,|XXR Wheels 522 15x7 +25 2" Lip
Features:
* Dynamic Concave spoke design sinks into a dramatically deep lug pocket
* Astounding X-Factor offers ample caliper clearance
* Specialized offsets ranging from "0" up to "+25"
* Multiple stagger fitment
* Offered in solid Flat-Black, Gold, and Chromium Black
Size:
* 15" x 7"
* +25 offset
* 4 x 100 lug pattern
* 2" Staggered Lip
* Price is per wheel *
ONLY Two in Stock
|,|"Select Finish" "Flat Black"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5221503|,||,|XXR Wheels 522 15x8 +0 3.5" Lip |,|XXR-52258082|,|114.00|,|82.99|,||,||,|5.000 |,||,||,||,|XXR Wheels 522 15x8 +0 3.5" Lip
Features:
* Dynamic Concave spoke design sinks into a dramatically deep lug pocket
* Astounding X-Factor offers ample caliper clearance
* Specialized offsets ranging from "0" up to "+25"
* Multiple stagger fitment
* Offered in solid Flat-Black, Gold, and Chromium Black
Size:
* 15" x 8"
* +0 offset
* 4 x 100 lug pattern
* 3.5" Staggered Lip
* Price is per wheel *
|,|"Select Finish" "Flat Black"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5221625|,|XXRWHEELS522|,|XXR Wheels 522 16x7 +25 2" Lip |,|XXR-52267082|,|127.50|,|86.95|,||,||,|5.000 |,||,||,||,|
Features:
* Dynamic Concave spoke design sinks into a dramatically deep lug pocket
* Astounding X-Factor offers ample caliper clearance
* Specialized offsets ranging from "0" up to "+25"
* Multiple stagger fitment
* Offered in solid Flat-Black, Gold, and Chromium Black
Size:
* 16" x 7"
* +25 offset
* 4 x 100 lug pattern, and 4 X 114.3 lug pattern
* 2" Staggered Lip
* Price is per wheel *
|,|"Select Finish" "Flat Black"|-||-|"Select Bolt Pattern" "4 x 100" "4 X 114.3"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXRWH5221603|,|XXRWHEELS522|,|XXR Wheels 522 16x8 +0 3.5" Lip |,|XXR-52268082|,|134.00|,|86.95|,||,||,|5.000 |,||,||,||,|
Features:
* Dynamic Concave spoke design sinks into a dramatically deep lug pocket
* Astounding X-Factor offers ample caliper clearance
* Specialized offsets ranging from "0" up to "+25"
* Multiple stagger fitment
* Offered in solid Flat-Black, Gold, and Chromium Black
Size:
* 16" x 8"
* +0 offset
* 4 x 100 lug pattern, and 4 X 114.3 lug pattern
* 3.5" Staggered Lip
* Price is per wheel *
|,|"Select Finish" "Flat Black" "Chromium Black"|-||-|"Select Bolt Pattern" "4 x 100" "4 X 114.3"|-||-|"Shipping Cost" "add(+$24.99)"|-||-|||-||XXR-531-15-WHEELS|,||,|XXR Wheels 531 15x8 +20|,|XXR-53158080|,|149.99|,|119.95|,||,||,|0.000 |,||,||,||,|XXR Wheels 531 15x8 +20
Platinum
Size
*15" x 8"
* +20 offset
* 4 x 100 lug pattern
* Price is per wheel
|,|"Shipping cost" "add(+$29.99)"|-||-|||-||YELBLACCARFI|,|CUSTOMDASHKIT|,|Yellow & Black Carbon Fiber|,|yelblaccarfi|,||,||,||,||,||,||,||,||,||,|||-||YELCARFIB|,|CUSTOMDASHKIT|,|Yellow Carbon Fiber|,|yelcarfib|,||,||,||,||,||,||,||,||,||,|||-||ZOOM-CARBON-MIRRORS|,|NBACCESSORIES|,|Zoom Carbon Mirrors 1990-2005|,|zoom-carbon-mirrors|,|525.05|,|469.95|,||,||,||,||,||,||,|Zoom Carbon Mirrors 1990-2005
Product from Japan made by ZOOM. Made of high quality Carbon Fiber.
• Nice racing mirrors to give our car a sporty look
• Stylish and retro
• High quality product from Japan
• Price is for a pair of (2) mirrors
• Available for NA (1989-1997) and NB Miata (1998-2005)
|,|"Select Year" "Select Here" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)"|-||-|"Select Finish" "Select Here" "Black Carbon Fiber" "Silver Carbon Fiber"|-||-|"Select Base" "Select Here" "Short Base" "Extended Base"|-||-|||-||ZOOM-COMPACT-RETRO-REAR-VIEW-MIRROR|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|ZOOM Compact Retro Rear View Mirror 1990-2016+|,|zoom-compact-retro-rear-view-mirror|,|269.95|,|239.95|,||,||,||,||,||,||,|ZOOM Compact Retro Rear View Mirror 1990-2016+
Classic & Retro Rear View Mirror from ZOOM Engineering that will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It is available in S and M sizes. It offers a wider view than OEM mirror even tough it's smaller (M version only). Its blue tinted window also will help reduce glare from cars behind your vehicle.
-Better view than OEM mirror (M version)
-Measures 190mm x 65mm
-Made of aluminum (anodized)
-Includes rear view mirror & mounting arm
-Wide angle blue lens (M version)
-Fits ALL YEARS Mazda Miata
|,|"Select Year" "Select Here" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)" "ND (16+) - With Sensor" "ND (16+) - Without Sensor"|-||-|"Select Size" "Select Here" "M (Medium : 170mm x 60mm) add(+$15)" "S (Small : 136mm x 50mm)"|-||-|"Select Finish" "Select Here" "Black" "Silver"|-||-|||-||ZOOM-TS-REAR-VIEW-MIRROR|,|MAZDA-MX-5-MIATA-INTERIOR-PARTS-AND-ACCESSORIES-2016|,|ZOOM TS Rear View Mirror 1990-2016+|,|zoom-ts-rear-view-mirror|,|285.05|,|254.00|,||,||,||,||,||,||,|ZOOM TS Rear View Mirror
The TS rear view mirror made by ZOOM Engineering will fit NA, NB, NC & ND Miata and replace your OEM mirror. It comes with mounting base that will adapt or replace your existing one. It measures 245mm wide by 58mm vertical. It offers a wider view than OEM mirror for better safety. It also will help reduce glare from cars behind your vehicle.
-Better view than OEM mirror
-Measures 245mm x 58mm
-Reduces glare from cars behind
-Includes rear view mirror & mounting arm
-Wide angle blue lens
-Fits ALL YEARS Mazda Miata
|,|"Select Application" "Select Here" "NA6CE (89-93)" "NA8C (94-97)" "NB8C-1 (98-00)" "NB8C-2 (01-05)" "NCEC-1 (06-08)" "NCEC-2 (09-12)" "NCEC-3 (13-15)" "ND (16+) - With Sensor (See Description)" "ND (16+) - Without Sensor (See Description)"|-||-|"Select Finish" "Select Here" "White" "Black Carbon Fiber add(+$65)" "Kevlar Carbon Fiber add(+$65)" "Silver Carbon Fiber add(+$65)"|-||-|||-||ZOZOKEYCHBL|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Zoom Zoom Key Chain Black|,|KEY-KC1540ZOOM|,|21.99|,|17.95|,||,||,|0.000 |,||,||,||,|Genuine black leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||ZOZOKEYCHRED|,|MAZDA-MX-5-MIATA-GIFTS-AND-MORE-PARTS-AND-ACCESSORIES-2016|,|Zoom Zoom Key Chain Brown|,|KEY-KC1541ZOOM|,|21.95|,|16.95|,||,||,|0.000 |,||,||,||,|Zoom Zoom Key Chain Brown
Genuine Brown leather with hinged steel key holder. Measures approximately 1" x 3-1/4".
|,|||-||SHOP-BY-TOP-MIATA-BRANDS-ZYMOL|,|SHOP-BY-TOP-MIATA-BRANDS|,|ZYMOL|,||,||,||,||,||,||,||,||,||,||,|||-||ZYBUTO|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Zymol Buffing Towels|,|ZYM-501|,|35.99|,|27.99|,||,||,|0.000 |,||,||,||,|Not all towels are created equal. Every domestically made towel is washed several times by the manufacturer to remove excess dye. Unfortunately, this leaves the towel looking limp and used. So, manufacturers then "size" the towel to make it look more attractive and new again. This "sizing" process uses a starch and silicone mixture that will scratch and contaminate your paint finish.
zymöl towels are not "sized".
Sold as 2 pack.
|,|||-||DETAILBRUSH|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Zymol Detail Brush|,|ZYM-401|,|16.95|,|11.03|,||,||,|0.000 |,||,||,||,|DISCONTINUED
It’s the details that make the difference. Soft, long Horse Hair bristles, molded into a handle without metal protect your paint while you’re using this lightweight Detail Brush. Great for interior detailing too!
|,|||-||ZYMOLFAQ|,|SHOP-BY-TOP-MIATA-BRANDS-ZYMOL|,|Zymol FAQ|,||,||,||,||,||,||,||,||,||,|
ZYMOL FAQ
What is Carnauba and where does it come from?
Carnauba is a vegetable wax (fat) obtained from the leaves of the Carnauba Palm. Carnauba has an affinity to water, the ability to retain oil and has excellent gloss properties making it applicable in a vast variety of industries. Carnauba is widely used in cosmetics, particularly in stick applications. Carnauba is the hardest natural wax and lustrous composition, making it the leading choice for food coatings, pharmaceutical coatings and polishes. Number One Grade Carnauba varies from a very pale yellow (white), through a greenish brown (yellow). The color and quality are governed by the age of the leaves and the care used in processing the wax. In addition to color, the wax is also graded according to area of origin – Parnahyba, Pious, Ceara and Bahai.
Carnauba Wax is exuded by the leaves of the Brazilian “Tree of Life” (Copernica Cerifera to converse precious moisture. This Carnauba Palm grows in northern and north-eastern Brazil along the river banks, valleys and lagoons where the soil is dark and fertile. The tree needs very little water to grow, is very prolific and attains a height of 40-50 feet after fifty years. The natives use the tree for many necessities in their lives; hence the name “Tree of Life”. Only in northern Brazil does the Carnauba Palm produce the wax.
Leaves containing the wax are cut off during the period from September to March. (This process in no way endangers the tree.) The leaves are soaked in kerosene or turpentine to soften the wax, resulting in a thick liquid that is poured into moulds and allowed to solidify. The Carnauba ?IJLumps?Ĵ are weighed and coded for sale to processors.
Being a natural plant by-product it will not react with any paint, Carnauba provides a very hard film over your car’s surface to protect against airborne contaminants such as acid rain residue, catalytic converter emissions, bug tar, road grime, salt and bird droppings. Carnauba swells and closes its pores when exposed to water. Carnauba also dramatically reduces paint oxidation by diffusing (refracting) UV and infrared radiation from the sun which can oxidize and dull your paint finish. Carnauba sounds good, but how much is contained in Zymöl Typical competitor’s waxes contain 3 to 5% Carnauba (not necessarily Brazilian No. 1 Carnauba) by volume. The greater the concentration of Carnauba the greater the level of protection and the higher the level of shine. Zym??l contains between 37% and 61% by volume, so now you can see why Zym??l is so effective in keeping your car in showroom condition.
What is unique about the Zymöl Container?
The Zymöl container is a 21st century application of the canning jar, made from pharmaceutical grade recyclable polystyrene. The high strength cap is designed to provide adequate air capture while closing. This allows a thin film of wax to begin the self-vacuumising process. The neoprene o-ring allows enzyme gasses to be released during self-vacuumising. This prevents the entry of outside air due to decreased internal pressure. The size, shape and weight of the base were designed for ease of handling, convenient storage and maximum protection of the ingredients.
Do I need to HD-Cleanse my new Car?
Yes you do. Although you may have a new car, there are many reasons as to why you still need to HD-Cleanse the vehicle. New cars are liable to having contamination on the paintwork such as fall out which may remain in the lacquer or paint. The preparation stages that car manufacturers put your car through are more often chemical based and involve buffing machines and polishing agents. All of these processes will accelerate oxidization.
Do I need to HD-Cleanse before waxing?
Even if it looks clean it probably is not. You just will not be able to see it. Waxing a surface that has not been properly cleaned will only result in a shiny wax layer over dull, dirty paint – not the deep smooth, crystalline finish Zymöl is capable of obtaining.
Why is HD-Cleanse better than other Pre-Wax cleaners? Most competitive products incorporate abrasive “grit” to “scrub” the surface clean. HD-Cleanse uses Montan oil (a natural solvent that will not penetrate clean paint), apricot kernel oil, and lemon seed oil spun to a very thin consistency. As you apply HD-Cleanse, the oils penetrate and breakdown everything on the surface of the paint encapsulating grime impurities and dead paint so they can be wiped off without scratching the top paint layer. HD-Cleanse uncovers a lower level of paint with life and luster without any solvents, abrasives or caustic materials.
Can I use Zymöl on metallic paints?
Yes, Zymöl contains no harsh petrochemical solvents, making it safe to apply on all paint finishes including brand new cars.
Is the wheel cleaner safe to use on Chrome Alloys? Yes, Zymöl Wheel Cleaner is a non-corrosive, phosphorous-free wheel wash that is 100% safe for all chrome, painted, coated alloy, aluminum or steel wheels. Brake dust will permanently damage the finish of your wheels. The adhesive used to mould brake pads will etch and pit the wheels if you allow it to remain in contact with your heated wheel surfaces.
How long do the products last?
You need to be sure that your products are fresh. Assuming that you are referring to the Liquids; the shelf life will be around 18 months and the Waxes/Glazes; Indefinitely. To ensure this happens store Waxes and Glazes in a cool dark place or in the refrigerator.
Can I reduce swirl marks?
Yes you can reduce swirl marks. Some professional paint specialists are able to remove them entirely. Using Zymöl HD-Cleanse can aid in helping to reduce or remove swirl marks. Swirl marks are microscopic scratches in the finish that are normally round or oval in pattern. These are often caused by the preparation of the paint after the spray booth (Manufacturer or otherwise), the use of buffing machines, even more so with the wrong type of polishing pad and in particular automatic car washes!
To help prevent swirl marks, thoroughly wash all dirt particles from your finish before applying wax. Use HD-Cleanse regularly and use a 100% terry cotton towel, because its fibers and weave draw any contaminants on the surface of the paint up into the towel instead of letting them scratch the paint or lacquer.
What’s the difference between an ordinary Polish and a Wax?Polishes are paint cleaners that generally use abrasives or chemicals to remove paint that has been discolored by impurities and oxidization. Zymöl Cleaner Wax uses superior micro-fine cleaners to remove unsightly scratches and oxidization while leaving behind a simple and effective Beeswax protection.
Ordinary cleaner/waxes contain many of the same abrasives and chemicals that polishes do with the addition of silicones or solvent resins to mask scratches and imitate what a “real” wax should do. Real wax, like the waxes of the Zymöl 2-step process are non-abrasive and non-solvent, highly reflective and protective coatings for your paint.
HD-Cleanse, the first step of the Zymöl 2-step process, provides deep cleaning without removing precious paint, restores valuable oils to the paint, eliminates fine scratches and creates an incredible high gloss not possible with ordinary polishes or waxes.
For your everyday car you will see dramatic differences if you use Zymöl Hand-Crafted Waxes and Glazes. Your special car will be transformed if you use Zymöl HD-Cleanse. For maximum protection, use Zymöl waxes to complete the Zymöl process.
Why should I use Zymöl buffing towels and microwipes Zymöl towels are made without sizing. “Sizing” chemically fluffs up a towel, but can cause fine scratches in the paint. Zymöl towels provide extra insurance against damaging the paint while removing excess wax and buffing the surface. Zymöl microwipes are the 21st Century alternative with a nylon + nytril quad axial woven material that repels the wax, forcing all of your Zymöl wax or glaze to bond during application. Zymöl microwipes do not contain polyester.
Can I wash and re-use my Zymöl towels and microwipes?
Wash your Zymöl terry towels and/or microwipes using standard clothes washing detergents without fabric softener (most softeners contain silicones). Wash and rinse in warm water >60C. Rinse twice! Machine dry without dryer sheets or fabric softener.
Why should I use Zymöl over other less expensive chalk based products?
Zymöl contains no harsh petrochemical solvents, making it safe to apply on all paint finishes including brand new cars. Zymöl has an extremely high Carnauba content (33 to 70%) and the Carnauba used is the very highest available grade – Brazilian No. 1 Yellow and White Carnauba. This gives both greater protection and increased depth of shine as compared with other products. Zymöl is an enzyme mixture until it is actually applied to the car. Only at that point, when oxygen acts as the catalyst, does Zymöl become ‘wax’ and start bonding to the car’s surface. Zymöl wax is very easy to apply and remove and will not leave any white “residue’ along seams, in cracks or on black plastic trim.
Will Zymöl remove stone chips and heavy scratching?
Unfortunately not. This is because Zymöl is natural and clear. If used correctly Zymöl will only help to reduce the amount of damage caused to your paintwork but will not stop the damage being caused. Using a colored based polish/wax will only mask the problem and if it is a polish will wear off after short period of time. To correct stone chips and heavy scratching we would suggest that you consult a professional paint specialist.
Why use Zymöl Clear Auto bathe?
Zymöl Clear is a maintenance car wash containing surface conditioners and protective oils that will remove surface grime yet will not strip off the wax.
Most competitive products utilize chemical (sodium) etching to remove dirt. These chemicals also remove wax and natural oils, and can actually accelerate paint oxidation. Zymöl Clear uses PH adjusted, spun tallow soap and pure lemon extract to release grit and contaminants from the surface. Natural coconut oils break down into millions of beads which cling to and encapsulate the dirt and allow it to slide off the surface without scratching or removing existing wax. Zymöl Clear contains no sodium or solvents and will not attack existing wax.
|,|||-||ZYMOLMICROWIPE|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Zymol Microwipe|,|ZYM-ZMW101|,|29.99|,|19.99|,||,||,|0.000 |,||,||,||,|The zymöl Microwipe is the 21st Century alternative to final buffing with a cotton towel. The ultra light- weight, "rubber" (nylon +nytril) quad axial woven material repels wax, forcing all of your zymol wax to bond during application. Additionally, the zymöl Microwipe allows you let zymol wax bond longer (up to 5 minutes before buffing to a brilliant deep shine). The zymöl Microwipe eliminates over-buffing which can be a significant source of scratching. The easy-to-clean, 16x16 towelette perfects the wax application to your beauty any time.
Care Instructions: Hand wash or machine wash in luke warm water, mild detergent - do not use fabric softeners or detergents containing fabric softeners, as streaks and smears in your finish may result.
Sold as 2 pack.
|,|||-||ZYPRAP|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Zymol Pre-Wax Applicators|,|ZYM-504|,|22.99|,|14.95|,||,||,|0.000 |,||,||,||,|The right Applicators are as important as the right tools.
Our applicators were designed and manufactured to perform specific tasks. The hand-sewn terry over foam Pre-Wax Applicator provides just the right amount of friction during HD-Cleanse or Polish application.
|,|||-||ZYSYCH|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Zymol Synthetic Chamois|,|ZYM-506|,|19.99|,|15.99|,||,||,|0.000 |,||,||,||,|As a cost effetive alternative to leather, this Zymol synthetic Chamois absorbs and squeegees like leather without removing wax.
|,|||-||WASHSPONGE|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Zymol Wash Sponge|,|ZYM-505|,|9.99|,|8.00|,||,||,|0.000 |,||,||,||,|The right Sponge makes a big job easy.
Molded without paint killing silicone, this forever supple, heavyweight sponge drenches your car in soft frothy bubbles, helping you slide dirt and foreign matter away from your paint with minimum effort.
This huge sponge will take care of your Miata in minutes!
|,|||-||WAXAP3PK|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Zymol Wax Applicator 3pk|,|ZYM-500|,|22.99|,|14.05|,||,||,|0.000 |,||,||,||,|The right Applicators are as important as the right tools.
Zymol Wax Applicator Sponges 3-pack. Having the right applicator is almost as important as the wax itself. That's why you should trust your precious finish to the gentle touch of Zymöl Wax Applicators. They spread an even coat of Zymöl on your paint that makes hand-waxing easy, without leaving behind unsightly swirls.
The silicone content in lesser wax applicators can be harsh on your paint, and even cause micro-abrasions. Zymöl Wax Applicators are hand-pressed from non-silicone foam, creating the spongy safe material that treats your finish right. It is this special manufacturing method that allows a Zymöl Applicator to deliver flawless results with every use.
Zymöl Wax Applicators are sold in 6-packs, ensuring that you always have a clean pad at hand. Each is pressed with the enduring Zymöl logo and tucks easily inside the lid of 8oz. Zymöl wax jars.
Features:
* Zymöl Wax Applicators are crafted specifically to ensure an even coat of Zymöl Handcrafted Paste Wax that saves time and energy * Crafted from hand-pressed non-silicone foam, the safest wax applicator material made * Zymöl Wax Applicators are pressed with the enduring Zymöl logo * Also works well to evenly apply other waxes with greater precision * Zymöl Wax Applicators are sold in a convenient pack of 3 applicators
Size: 3-pack of Applicator Sponges in Blue
|,|||-||WHEELBRUSH|,|MIATA-OEM-ALL-OTHER-PARTS-1999-2005|,|Zymol Wheel Brush|,|ZYM-402|,|43.50|,|26.95|,||,||,|0.000 |,||,||,||,|This is our 100% Horse Hair Wheel Brush imported from Belgium. Manufactured without a metal ferrule, this brush is designed to deep clean and is guaranteed to never scratch or mar the delicate finish of your wheels or any polished brightwork.
|,|||-||ZYWODU|,|MAZDA-MX-5-MIATA-CAR-COVER-AND-CARE-PARTS-AND-ACCESSORIES-2016|,|Zymol Wool Duster|,|ZYM-508|,|59.99|,|46.01|,||,||,|0.000 |,||,||,||,|The Zymol Natural Wool Duster is the smart alternative to dirt-collecting waxed cotton. The ultra lightweight, All-Wool pelt eliminates dust with an inherent static charge that can be enhanced with the technique below. The easy-to-hold, foot-long Birch handle with a self-hanging leather strap allows you to apply just the right touch up to your beauty any time.
|,|||-|
