Mazda MX-5 Miata Cage Roll Cage 2016+
Fully coped ready to weld in roll cage kit for your 2016+ Mazda Miata. Legal for SCCA/Nasa/World Challenge and other sanctioning bodies.
Go Miata is now offering a roll cage kit for the 2016 ND Mazda MX5 Miata. Designed just like our 1990-2015 kits it offers the most room possible in the car while protecting the occupants.
This kit however if FULLY coped and ready for install. Minimal fitting required and comes with 2 templates that bolt to the car for proper placement of the main hoop. Once the main hoop is placed properly then all other tubes will fit into their proper position.
Kit comes will all plates laser cut and formed needed for the installation.
There are no S-bends in this kit for hte door bars. Unlike other designs we avoided those S style bends in the door bars which giving you the most strength possible.
* Lightweight weld in kit.
* Laser cut and formed landing plates (10). Weld into place with no modifications.
* 1” tube gussets and landing plates and center Taco gusset all included.
* Main Hoop locator bracket - This is a bolt in bracket to align the main hoop in the car for the proper position since all other tubes key off of the main hoop.
* Fully notched kit. All tubes are fully notched/coped and ready for installation.
* Having the kit fully notched reduces the installation time by over 10 hours.
* In house Computer controlled bending ensuring accurate bends every time.
* Every piece is marked with a part # that corresponds to 4 separate full page schematics.
* Rear down tubes land next to shock mounts.
* When installed properly less than 1/4 inch of clearance to roof allowing for more head room for taller drivers.
* Includes Nascar door bars on both drivers and passenger sides installed at an angle that provide the driver with added safety in the event of a side impact.
* Allows for stock passenger seat to be reinstalled once complete.
* Kill Switch Plate for passenger side main hoop area.