 Our Price: $1,840.00 |
 Our Price: $1,840.00 |
 Our Price: $2,140.00 |
 Our Price: $2,140.00 |
Mazda Miata Adjustable Drop Links
Item #: MC-DROP
 |
 |
 |
|
|
|
Mazda Miata Adjustable drop links 1990-2005.
Made from Aluminum and anadized in red. This kit is complete with 4 adjustable drop links.
We supply the kit with clevis pins and cauder pins for the upper portion (or nuts and bolts if you prefer) of the drop link that attaches to the sway bar instead of nuts and bolts, so that you can make changes to the sway bar during qualifying without needing to unbolt the drop links. It also makes setup nice and easy because you don't need wrenches, simply remove the cauder pin, change the setting, and replace. The front drop links get spacers so that there is zero bind in the drop link in any of the 3 (1.6) settings. These work with both new (single shear) and old (double shear) style lower control arms.
You should have no bind in the sway bar links at all when installed. Other drop links on the market are too long, only right hand thread rod ends, and no spacers, so they have bind when the sway bar is in the full stiff position.
These work with the new 99 shock hats on the early cars.
Drop links come with the following pieces fully assembled:
* Spacers (2)
* Left (4) and Right (4) hand thread heim rod ends.
* Clevis pins (6)
* Cauder Pins (4)
* 3/8 Bolts and Nylock Nuts (4)
* Threaded (left and right) hex aluminum anadized body (4)
If you have a non-adjustabel sway bar, or wish to have nuts and bolts instead of the clevis and cotter pins, please select from the drop down. You must choose one or the other, as both sets of hardware WILL NOT be shipped.
Made from Aluminum and anadized in red. This kit is complete with 4 adjustable drop links.
We supply the kit with clevis pins and cauder pins for the upper portion (or nuts and bolts if you prefer) of the drop link that attaches to the sway bar instead of nuts and bolts, so that you can make changes to the sway bar during qualifying without needing to unbolt the drop links. It also makes setup nice and easy because you don't need wrenches, simply remove the cauder pin, change the setting, and replace. The front drop links get spacers so that there is zero bind in the drop link in any of the 3 (1.6) settings. These work with both new (single shear) and old (double shear) style lower control arms.
You should have no bind in the sway bar links at all when installed. Other drop links on the market are too long, only right hand thread rod ends, and no spacers, so they have bind when the sway bar is in the full stiff position.
These work with the new 99 shock hats on the early cars.
Drop links come with the following pieces fully assembled:
* Spacers (2)
* Left (4) and Right (4) hand thread heim rod ends.
* Clevis pins (6)
* Cauder Pins (4)
* 3/8 Bolts and Nylock Nuts (4)
* Threaded (left and right) hex aluminum anadized body (4)
If you have a non-adjustabel sway bar, or wish to have nuts and bolts instead of the clevis and cotter pins, please select from the drop down. You must choose one or the other, as both sets of hardware WILL NOT be shipped.
Retail Price: $229.99
$194.95
You Save $ 35.04
 |  |  |
| ||
Our Price: $89.70 | | Our Price: $152.00 |
 | ||
Our Price: $229.00 | ||
