 Our Price: $1,840.00 |
 Our Price: $1,840.00 |
 Our Price: $2,140.00 |
 Our Price: $2,140.00 |
Racing Beat Mazda Miata Sway Bar End Links 1990-1997 - Front & Rear
Item #: 154-200
 |
 |
 |
|
|
|
Racing Beat Mazda Miata Sway Bar End Links 1990-1997 - Front & Rear
Application: 1990-1997 Miata Front - Our popular Racing Beat-designed Miata sway bar end links are a direct swap with the Miata factory links for all 1990-1997 Miatas (front and rear) and provide the performance enthusiast the ability to set either front or rear Miata sway bars to a "neutral position" while the chassis is at ride height to avoid pre-loading of the bar. The experienced enthusiast may wish to purposely "pre-load" the sway bar to create a specific handling characteristic to induce either a mild understeer or oversteer condition.
Although the stock end links were well suited for use with the original Miata sway bar, installation of a stronger, stiffer aftermarket Miata sway bar may accelerate the end link wear. This is particularly true if you're still using the tired, old factory installed units.
The Racing Beat sway bar end links feature CNC-machined aluminum end housings and are fitted with urethane bushings to further reduce flexing - as compared to softer stock rubber bushing links. The end link mounting sleeve is fabricated from 4130 chrome moly steel tubing, then heat-treated during the manufacturing process to ensure superior strength and longevity. We prefer the use of our design as compared to the commonly used Heim-joint design due to the slightly more forgiving nature of the urethane components used. The urethane bushing material absorbs road vibration and harshness as compared with more rigid and unforgiving Heim-joint ball style ends. If you use your car as a daily-driven vehicle, in the long run we believe you'll appreciate the Racing Beat end links.
Each set contains two (2) complete end links to serve one (1) sway bar. These end links have been designed for use on the Mazda stock bar, all Racing Beat sway bars, and comparable aftermarket bars.
Application: 1990-1997 Miata Front - Our popular Racing Beat-designed Miata sway bar end links are a direct swap with the Miata factory links for all 1990-1997 Miatas (front and rear) and provide the performance enthusiast the ability to set either front or rear Miata sway bars to a "neutral position" while the chassis is at ride height to avoid pre-loading of the bar. The experienced enthusiast may wish to purposely "pre-load" the sway bar to create a specific handling characteristic to induce either a mild understeer or oversteer condition.
Although the stock end links were well suited for use with the original Miata sway bar, installation of a stronger, stiffer aftermarket Miata sway bar may accelerate the end link wear. This is particularly true if you're still using the tired, old factory installed units.
The Racing Beat sway bar end links feature CNC-machined aluminum end housings and are fitted with urethane bushings to further reduce flexing - as compared to softer stock rubber bushing links. The end link mounting sleeve is fabricated from 4130 chrome moly steel tubing, then heat-treated during the manufacturing process to ensure superior strength and longevity. We prefer the use of our design as compared to the commonly used Heim-joint design due to the slightly more forgiving nature of the urethane components used. The urethane bushing material absorbs road vibration and harshness as compared with more rigid and unforgiving Heim-joint ball style ends. If you use your car as a daily-driven vehicle, in the long run we believe you'll appreciate the Racing Beat end links.
Each set contains two (2) complete end links to serve one (1) sway bar. These end links have been designed for use on the Mazda stock bar, all Racing Beat sway bars, and comparable aftermarket bars.
Retail Price: $119.99
$89.00
You Save $ 30.99
